All of lore.kernel.org
 help / color / mirror / Atom feed
From: Heiko Stuebner <heiko@sntech.de>
To: Shawn Lin <shawn.lin@rock-chips.com>
Cc: Stephen Boyd <sboyd@codeaurora.org>,
	Michael Turquette <mturquette@baylibre.com>,
	linux-clk@vger.kernel.org, linux-arm-kernel@lists.infradead.org,
	linux-rockchip@lists.infradead.org, linux-kernel@vger.kernel.org
Subject: Re: [PATCH v2] clk: rockchip: reset init state before mmc card initialization
Date: Thu, 03 Sep 2015 21:07:34 +0200	[thread overview]
Message-ID: <4930263.TgyPa9P2vP@phil> (raw)
In-Reply-To: <1440462876-5457-1-git-send-email-shawn.lin@rock-chips.com>

Am Dienstag, 25. August 2015, 08:34:36 schrieb Shawn Lin:
> mmc host controller's IO input/output timing is unpredictable if
> bootloader execute tuning for HS200 mode. It might make kernel failed
> to initialize mmc card in identification mode. The root cause is
> tuning phase and degree setting for HS200 mode in bootloader aren't
> applicable to that of identification mode in kernel stage. Anyway, we
> can't force all bootloaders to reset tuning phase and degree setting
> before into kernel. Simply reset it in rockchip_clk_register_mmc.
> 
> Signed-off-by: Shawn Lin <shawn.lin@rock-chips.com>

I'm not 100% sure why you need the new function instead of having that 
directly in rockchip_clk_register_mmc, but I guess that is a matter of taste 
and I don't have a hard opinion on that, so

Reviewed-by: Heiko Stuebner <heiko@sntech.de>

> 
> ---
> 
> Changes in v2:
> - rename to rockchip_clk_mmc_reset
> - simplifying the code
> 
>  drivers/clk/rockchip/clk-mmc-phase.c | 16 ++++++++++++++++
>  1 file changed, 16 insertions(+)
> 
> diff --git a/drivers/clk/rockchip/clk-mmc-phase.c
> b/drivers/clk/rockchip/clk-mmc-phase.c index e9f8df32..1d3e8fe6 100644
> --- a/drivers/clk/rockchip/clk-mmc-phase.c
> +++ b/drivers/clk/rockchip/clk-mmc-phase.c
> @@ -38,6 +38,8 @@ static unsigned long rockchip_mmc_recalc(struct clk_hw
> *hw, #define ROCKCHIP_MMC_DEGREE_MASK 0x3
>  #define ROCKCHIP_MMC_DELAYNUM_OFFSET 2
>  #define ROCKCHIP_MMC_DELAYNUM_MASK (0xff << ROCKCHIP_MMC_DELAYNUM_OFFSET)
> +#define ROCKCHIP_MMC_INIT_STATE_RESET 0x1
> +#define ROCKCHIP_MMC_INIT_STATE_SHIFT 1
> 
>  #define PSECS_PER_SEC 1000000000000LL
> 
> @@ -119,6 +121,14 @@ static const struct clk_ops rockchip_mmc_clk_ops = {
>  	.set_phase	= rockchip_mmc_set_phase,
>  };
> 
> +static void rockchip_clk_mmc_reset(struct rockchip_mmc_clock *mmc_clock)
> +{
> +	if (mmc_clock->shift == ROCKCHIP_MMC_INIT_STATE_SHIFT)
> +		writel(HIWORD_UPDATE(ROCKCHIP_MMC_INIT_STATE_RESET,
> +				     ROCKCHIP_MMC_INIT_STATE_RESET,
> +				     mmc_clock->shift), mmc_clock->reg);
> +}
> +
>  struct clk *rockchip_clk_register_mmc(const char *name,
>  				const char *const *parent_names, u8 num_parents,
>  				void __iomem *reg, int shift)
> @@ -139,6 +149,12 @@ struct clk *rockchip_clk_register_mmc(const char *name,
> mmc_clock->reg = reg;
>  	mmc_clock->shift = shift;
> 
> +	/*
> +	* Assert init_state to soft reset the CLKGEN
> +	* for mmc tuning phase and degree
> +	*/
> +	rockchip_clk_mmc_reset(mmc_clock);
> +
>  	if (name)
>  		init.name = name;

WARNING: multiple messages have this Message-ID (diff)
From: heiko@sntech.de (Heiko Stuebner)
To: linux-arm-kernel@lists.infradead.org
Subject: [PATCH v2] clk: rockchip: reset init state before mmc card initialization
Date: Thu, 03 Sep 2015 21:07:34 +0200	[thread overview]
Message-ID: <4930263.TgyPa9P2vP@phil> (raw)
In-Reply-To: <1440462876-5457-1-git-send-email-shawn.lin@rock-chips.com>

Am Dienstag, 25. August 2015, 08:34:36 schrieb Shawn Lin:
> mmc host controller's IO input/output timing is unpredictable if
> bootloader execute tuning for HS200 mode. It might make kernel failed
> to initialize mmc card in identification mode. The root cause is
> tuning phase and degree setting for HS200 mode in bootloader aren't
> applicable to that of identification mode in kernel stage. Anyway, we
> can't force all bootloaders to reset tuning phase and degree setting
> before into kernel. Simply reset it in rockchip_clk_register_mmc.
> 
> Signed-off-by: Shawn Lin <shawn.lin@rock-chips.com>

I'm not 100% sure why you need the new function instead of having that 
directly in rockchip_clk_register_mmc, but I guess that is a matter of taste 
and I don't have a hard opinion on that, so

Reviewed-by: Heiko Stuebner <heiko@sntech.de>

> 
> ---
> 
> Changes in v2:
> - rename to rockchip_clk_mmc_reset
> - simplifying the code
> 
>  drivers/clk/rockchip/clk-mmc-phase.c | 16 ++++++++++++++++
>  1 file changed, 16 insertions(+)
> 
> diff --git a/drivers/clk/rockchip/clk-mmc-phase.c
> b/drivers/clk/rockchip/clk-mmc-phase.c index e9f8df32..1d3e8fe6 100644
> --- a/drivers/clk/rockchip/clk-mmc-phase.c
> +++ b/drivers/clk/rockchip/clk-mmc-phase.c
> @@ -38,6 +38,8 @@ static unsigned long rockchip_mmc_recalc(struct clk_hw
> *hw, #define ROCKCHIP_MMC_DEGREE_MASK 0x3
>  #define ROCKCHIP_MMC_DELAYNUM_OFFSET 2
>  #define ROCKCHIP_MMC_DELAYNUM_MASK (0xff << ROCKCHIP_MMC_DELAYNUM_OFFSET)
> +#define ROCKCHIP_MMC_INIT_STATE_RESET 0x1
> +#define ROCKCHIP_MMC_INIT_STATE_SHIFT 1
> 
>  #define PSECS_PER_SEC 1000000000000LL
> 
> @@ -119,6 +121,14 @@ static const struct clk_ops rockchip_mmc_clk_ops = {
>  	.set_phase	= rockchip_mmc_set_phase,
>  };
> 
> +static void rockchip_clk_mmc_reset(struct rockchip_mmc_clock *mmc_clock)
> +{
> +	if (mmc_clock->shift == ROCKCHIP_MMC_INIT_STATE_SHIFT)
> +		writel(HIWORD_UPDATE(ROCKCHIP_MMC_INIT_STATE_RESET,
> +				     ROCKCHIP_MMC_INIT_STATE_RESET,
> +				     mmc_clock->shift), mmc_clock->reg);
> +}
> +
>  struct clk *rockchip_clk_register_mmc(const char *name,
>  				const char *const *parent_names, u8 num_parents,
>  				void __iomem *reg, int shift)
> @@ -139,6 +149,12 @@ struct clk *rockchip_clk_register_mmc(const char *name,
> mmc_clock->reg = reg;
>  	mmc_clock->shift = shift;
> 
> +	/*
> +	* Assert init_state to soft reset the CLKGEN
> +	* for mmc tuning phase and degree
> +	*/
> +	rockchip_clk_mmc_reset(mmc_clock);
> +
>  	if (name)
>  		init.name = name;

  parent reply	other threads:[~2015-09-03 19:07 UTC|newest]

Thread overview: 8+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2015-08-25  0:34 [PATCH v2] clk: rockchip: reset init state before mmc card initialization Shawn Lin
2015-08-25  0:34 ` Shawn Lin
2015-09-03 14:13 ` Shawn Lin
2015-09-03 14:13   ` Shawn Lin
2015-09-03 19:07 ` Heiko Stuebner [this message]
2015-09-03 19:07   ` Heiko Stuebner
2015-09-03 23:49   ` Shawn Lin
2015-09-03 23:49     ` Shawn Lin

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=4930263.TgyPa9P2vP@phil \
    --to=heiko@sntech.de \
    --cc=linux-arm-kernel@lists.infradead.org \
    --cc=linux-clk@vger.kernel.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-rockchip@lists.infradead.org \
    --cc=mturquette@baylibre.com \
    --cc=sboyd@codeaurora.org \
    --cc=shawn.lin@rock-chips.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.