* pv_ops dom0 testing
@ 2008-11-29 21:08 Todd Deshane
2008-11-29 21:38 ` Aviv Grafi
0 siblings, 1 reply; 22+ messages in thread
From: Todd Deshane @ 2008-11-29 21:08 UTC (permalink / raw)
To: xen-devel mailing list
[-- Attachment #1: Type: text/plain, Size: 1497 bytes --]
I am trying to get a pv_ops dom0 working for testing,
but I am running into an elf_init error:
(XEN) *** LOADING DOMAIN 0 ***
(XEN) elf_init: not an ELF binary
Full output attached.
>From what I have read on the mailing lists, it seems
that it is usually a problem with either grub or a
corrupt dom0 kernel.
Attached is my kernel config (2.6.28-rc6-tip).
I followed the instructions on:
http://wiki.xensource.com/xenwiki/XenParavirtOps
Then I did make menuconfig and added:
XEN_DOM0
XEN_BLKDEV_BACKEND
here are the two grub entries I tried
title Xen 3.4-unstable / Ubuntu 8.10, kernel 2.6.28-rc6-tip
root (hd0,0)
kernel /boot/xen-3.4-unstable.gz loglvl=all guest_loglvl=all
dom0_max_vcpus=1 com1=115200,8n1 console=com1 noreboot dom0_mem=512M
module /boot/vmlinuz-2.6.28-rc6-tip root=/dev/sda1 ro console=tty0
xencons=ttyS0,115200
module /boot/initrd.img-2.6.28-rc6-tip
title Xen 3.4-unstable / Ubuntu 8.10, kernel 2.6.28-rc6-tip
uuid 30596923-1435-4516-809d-ef8cd2958532
kernel /boot/xen-3.4-unstable.gz
module /boot/vmlinuz-2.6.28-rc6-tip
root=UUID=30596923-1435-4516-809d-ef8cd2958532 ro console=tty0
module /boot/initrd.img-2.6.28-rc6-tip
The error was reported by others (unanswered), but they might be unrelated:
http://xen.markmail.org/message/grqiejrlax6tyutn?q=elf_init
http://xen.markmail.org/message/r5y32q5yyuv4okgj?q=elf_init
Any suggestions on what went wrong and/or what else to try?
Cheers,
Todd
--
Todd Deshane
http://todddeshane.net
http://runningxen.com
[-- Attachment #2: xenboot.out --]
[-- Type: application/octet-stream, Size: 5725 bytes --]
__ __ _____ _ _ _ _ _
\ \/ /___ _ __ |___ /| || | _ _ _ __ ___| |_ __ _| |__ | | ___
\ // _ \ '_ \ |_ \| || |_ __| | | | '_ \/ __| __/ _` | '_ \| |/ _ \
/ \ __/ | | | ___) |__ _|__| |_| | | | \__ \ || (_| | |_) | | __/
/_/\_\___|_| |_| |____(_) |_| \__,_|_| |_|___/\__\__,_|_.__/|_|\___|
(XEN) Xen version 3.4-unstable (deshantm@) (gcc version 4.2.4 (Ubuntu 4.2.4-3ubuntu4)) Wed Nov 26 16:27:34 EST 2008
(XEN) Latest ChangeSet: Wed Nov 19 19:13:22 2008 +0000 18796:98d48f7680db
(XEN) Command line: loglvl=all guest_loglvl=all dom0_max_vcpus=1 com1=115200,8n1 console=com1 noreboot dom0_mem=512M
(XEN) Video information:
(XEN) VGA is text mode 80x25, font 8x16
(XEN) VBE/DDC methods: V2; EDID transfer time: 1 seconds
(XEN) Disc information:
(XEN) Found 2 MBR signatures
(XEN) Found 2 EDD information structures
(XEN) Xen-e820 RAM map:
(XEN) 0000000000000000 - 000000000009fc00 (usable)
(XEN) 00000000000f0000 - 0000000000100000 (reserved)
(XEN) 0000000000100000 - 00000000cfdffc00 (usable)
(XEN) 00000000cfdffc00 - 00000000cfe01c00 (ACPI NVS)
(XEN) 00000000cfe03c00 - 00000000cfe53c00 (reserved)
(XEN) 00000000cfe53c00 - 00000000cfe55c00 (ACPI data)
(XEN) 00000000cfe55c00 - 00000000d0000000 (reserved)
(XEN) 00000000e0000000 - 00000000f0000000 (reserved)
(XEN) 00000000fec00000 - 00000000fed00400 (reserved)
(XEN) 00000000fed20000 - 00000000feda0000 (reserved)
(XEN) 00000000fee00000 - 00000000fef00000 (reserved)
(XEN) 00000000ffb00000 - 0000000100000000 (reserved)
(XEN) 0000000100000000 - 000000012c000000 (usable)
(XEN) System RAM: 4029MB (4126328kB)
(XEN) ACPI: RSDP 000FEBF0, 0024 (r2 DELL )
(XEN) ACPI: XSDT 000FCE97, 0084 (r1 DELL B8K 15 ASL 61)
(XEN) ACPI: FACP 000FCFBF, 00F4 (r3 DELL B8K 15 ASL 61)
(XEN) ACPI: DSDT FFF68960, 475F (r1 DELL dt_ex 1000 INTL 20050624)
(XEN) ACPI: FACS CFDFFC00, 0040
(XEN) ACPI: SSDT FFF6D397, 009A (r1 DELL st_ex 1000 INTL 20050624)
(XEN) ACPI: APIC 000FD0B3, 0092 (r1 DELL B8K 15 ASL 61)
(XEN) ACPI: BOOT 000FD145, 0028 (r1 DELL B8K 15 ASL 61)
(XEN) ACPI: ASF! 000FD16D, 0092 (r32 DELL B8K 15 ASL 61)
(XEN) ACPI: MCFG 000FD1FF, 003E (r1 DELL B8K 15 ASL 61)
(XEN) ACPI: HPET 000FD23D, 0038 (r1 DELL B8K 15 ASL 61)
(XEN) ACPI: TCPA 000FD499, 0032 (r1 DELL B8K 15 ASL 61)
(XEN) ACPI: SLIC 000FD275, 0176 (r1 DELL B8K 15 ASL 61)
(XEN) ACPI: SSDT CFDFFC40, 01F9 (r1 DpgPmm Cpu0Ist 11 INTL 20050624)
(XEN) ACPI: SSDT CFE00049, 01F9 (r1 DpgPmm Cpu1Ist 11 INTL 20050624)
(XEN) ACPI: SSDT CFE00452, 0140 (r1 DpgPmm CpuPm 10 INTL 20050624)
(XEN) NUMA turned off
(XEN) Faking a node at 0000000000000000-000000012c000000
(XEN) Xen heap: 14MB (14612kB)
(XEN) Domain heap initialised
(XEN) found SMP MP-table at 000fe710
(XEN) DMI 2.3 present.
(XEN) Using APIC driver default
(XEN) ACPI: PM-Timer IO Port: 0x808
(XEN) ACPI: ACPI SLEEP INFO: pm1x_cnt[804,0], pm1x_evt[800,0]
(XEN) ACPI: wakeup_vec[cfdffc0c], vec_size[20]
(XEN) ACPI: Local APIC address 0xfee00000
(XEN) ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
(XEN) Processor #0 6:15 APIC version 20
(XEN) ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled)
(XEN) Processor #1 6:15 APIC version 20
(XEN) ACPI: LAPIC (acpi_id[0x03] lapic_id[0x05] disabled)
(XEN) ACPI: LAPIC (acpi_id[0x04] lapic_id[0x07] disabled)
(XEN) ACPI: LAPIC (acpi_id[0x05] lapic_id[0x00] disabled)
(XEN) ACPI: LAPIC (acpi_id[0x06] lapic_id[0x01] disabled)
(XEN) ACPI: LAPIC (acpi_id[0x07] lapic_id[0x02] disabled)
(XEN) ACPI: LAPIC (acpi_id[0x08] lapic_id[0x03] disabled)
(XEN) ACPI: LAPIC_NMI (acpi_id[0xff] high level lint[0x1])
(XEN) ACPI: IOAPIC (id[0x08] address[0xfec00000] gsi_base[0])
(XEN) IOAPIC[0]: apic_id 8, version 32, address 0xfec00000, GSI 0-23
(XEN) ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
(XEN) ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
(XEN) ACPI: IRQ0 used by override.
(XEN) ACPI: IRQ2 used by override.
(XEN) ACPI: IRQ9 used by override.
(XEN) Enabling APIC mode: Flat. Using 1 I/O APICs
(XEN) ACPI: HPET id: 0x8086a201 base: 0xfed00000
(XEN) Using ACPI (MADT) for SMP configuration information
(XEN) Using scheduler: SMP Credit Scheduler (credit)
(XEN) Initializing CPU#0
(XEN) Detected 2394.081 MHz processor.
(XEN) CPU: L1 I cache: 32K, L1 D cache: 32K
(XEN) CPU: L2 cache: 4096K
(XEN) CPU: Physical Processor ID: 0
(XEN) CPU: Processor Core ID: 0
(XEN) HVM: VMX enabled
(XEN) CPU0: Intel(R) Core(TM)2 CPU 6600 @ 2.40GHz stepping 06
(XEN) Booting processor 1/1 eip 8c000
(XEN) Initializing CPU#1
(XEN) CPU: L1 I cache: 32K, L1 D cache: 32K
(XEN) CPU: L2 cache: 4096K
(XEN) CPU: Physical Processor ID: 0
(XEN) CPU: Processor Core ID: 1
(XEN) CPU1: Intel(R) Core(TM)2 CPU 6600 @ 2.40GHz stepping 06
(XEN) Total of 2 processors activated.
(XEN) ENABLING IO-APIC IRQs
(XEN) -> Using new ACK method
(XEN) ..TIMER: vector=0xF0 apic1=0 pin1=2 apic2=-1 pin2=-1
(XEN) checking TSC synchronization across 2 CPUs: passed.
(XEN) Platform timer is 14.318MHz HPET
(XEN) Brought up 2 CPUs
(XEN) I/O virtualisation disabled
(XEN) ACPI sleep modes: S3
(XEN) MCA: Machine check polling timer started.
(XEN) *** LOADING DOMAIN 0 ***
(XEN) elf_init: not an ELF binary
(XEN)
(XEN) ****************************************
(XEN) Panic on CPU 0:
(XEN) Could not set up DOM0 guest OS
(XEN) ****************************************
(XEN)
(XEN) Manual reset required ('noreboot' specified)
[-- Attachment #3: .config --]
[-- Type: application/octet-stream, Size: 90128 bytes --]
#
# Automatically generated make config: don't edit
# Linux kernel version: 2.6.28-rc6
# Fri Nov 28 14:12:34 2008
#
CONFIG_64BIT=y
# CONFIG_X86_32 is not set
CONFIG_X86_64=y
CONFIG_X86=y
CONFIG_ARCH_DEFCONFIG="arch/x86/configs/x86_64_defconfig"
CONFIG_GENERIC_TIME=y
CONFIG_GENERIC_CMOS_UPDATE=y
CONFIG_CLOCKSOURCE_WATCHDOG=y
CONFIG_GENERIC_CLOCKEVENTS=y
CONFIG_GENERIC_CLOCKEVENTS_BROADCAST=y
CONFIG_LOCKDEP_SUPPORT=y
CONFIG_STACKTRACE_SUPPORT=y
CONFIG_HAVE_LATENCYTOP_SUPPORT=y
CONFIG_FAST_CMPXCHG_LOCAL=y
CONFIG_MMU=y
CONFIG_ZONE_DMA=y
CONFIG_GENERIC_ISA_DMA=y
CONFIG_GENERIC_IOMAP=y
CONFIG_GENERIC_BUG=y
CONFIG_GENERIC_HWEIGHT=y
CONFIG_GENERIC_GPIO=y
CONFIG_ARCH_MAY_HAVE_PC_FDC=y
CONFIG_RWSEM_GENERIC_SPINLOCK=y
# CONFIG_RWSEM_XCHGADD_ALGORITHM is not set
CONFIG_ARCH_HAS_CPU_IDLE_WAIT=y
CONFIG_GENERIC_CALIBRATE_DELAY=y
CONFIG_GENERIC_TIME_VSYSCALL=y
CONFIG_ARCH_HAS_CPU_RELAX=y
CONFIG_ARCH_HAS_DEFAULT_IDLE=y
CONFIG_ARCH_HAS_CACHE_LINE_SIZE=y
CONFIG_HAVE_SETUP_PER_CPU_AREA=y
CONFIG_HAVE_CPUMASK_OF_CPU_MAP=y
CONFIG_ARCH_HIBERNATION_POSSIBLE=y
CONFIG_ARCH_SUSPEND_POSSIBLE=y
CONFIG_ZONE_DMA32=y
CONFIG_ARCH_POPULATES_NODE_MAP=y
CONFIG_AUDIT_ARCH=y
CONFIG_ARCH_SUPPORTS_OPTIMIZED_INLINING=y
CONFIG_GENERIC_HARDIRQS=y
CONFIG_GENERIC_IRQ_PROBE=y
CONFIG_GENERIC_PENDING_IRQ=y
CONFIG_X86_SMP=y
CONFIG_USE_GENERIC_SMP_HELPERS=y
CONFIG_X86_64_SMP=y
CONFIG_X86_HT=y
CONFIG_X86_BIOS_REBOOT=y
CONFIG_X86_TRAMPOLINE=y
# CONFIG_KTIME_SCALAR is not set
CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
#
# General setup
#
CONFIG_EXPERIMENTAL=y
CONFIG_LOCK_KERNEL=y
CONFIG_INIT_ENV_ARG_LIMIT=32
CONFIG_LOCALVERSION=""
# CONFIG_LOCALVERSION_AUTO is not set
CONFIG_SWAP=y
CONFIG_SYSVIPC=y
CONFIG_SYSVIPC_SYSCTL=y
CONFIG_POSIX_MQUEUE=y
CONFIG_BSD_PROCESS_ACCT=y
CONFIG_BSD_PROCESS_ACCT_V3=y
CONFIG_TASKSTATS=y
# CONFIG_TASK_DELAY_ACCT is not set
CONFIG_TASK_XACCT=y
CONFIG_TASK_IO_ACCOUNTING=y
CONFIG_AUDIT=y
CONFIG_AUDITSYSCALL=y
CONFIG_AUDIT_TREE=y
# CONFIG_IKCONFIG is not set
CONFIG_LOG_BUF_SHIFT=17
CONFIG_CGROUPS=y
# CONFIG_CGROUP_DEBUG is not set
CONFIG_CGROUP_NS=y
# CONFIG_CGROUP_FREEZER is not set
# CONFIG_CGROUP_DEVICE is not set
CONFIG_CPUSETS=y
CONFIG_HAVE_UNSTABLE_SCHED_CLOCK=y
CONFIG_GROUP_SCHED=y
CONFIG_FAIR_GROUP_SCHED=y
CONFIG_RT_GROUP_SCHED=y
# CONFIG_USER_SCHED is not set
CONFIG_CGROUP_SCHED=y
CONFIG_CGROUP_CPUACCT=y
CONFIG_RESOURCE_COUNTERS=y
CONFIG_MM_OWNER=y
CONFIG_CGROUP_MEM_RES_CTLR=y
# CONFIG_SYSFS_DEPRECATED_V2 is not set
CONFIG_PROC_PID_CPUSET=y
CONFIG_RELAY=y
CONFIG_NAMESPACES=y
CONFIG_UTS_NS=y
CONFIG_IPC_NS=y
# CONFIG_USER_NS is not set
# CONFIG_PID_NS is not set
CONFIG_BLK_DEV_INITRD=y
CONFIG_INITRAMFS_SOURCE=""
# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
CONFIG_SYSCTL=y
# CONFIG_EMBEDDED is not set
CONFIG_UID16=y
CONFIG_SYSCTL_SYSCALL=y
CONFIG_KALLSYMS=y
CONFIG_KALLSYMS_ALL=y
# CONFIG_KALLSYMS_EXTRA_PASS is not set
CONFIG_HOTPLUG=y
CONFIG_PRINTK=y
CONFIG_BUG=y
CONFIG_ELF_CORE=y
CONFIG_PCSPKR_PLATFORM=y
# CONFIG_COMPAT_BRK is not set
CONFIG_BASE_FULL=y
CONFIG_FUTEX=y
CONFIG_ANON_INODES=y
CONFIG_EPOLL=y
CONFIG_SIGNALFD=y
CONFIG_TIMERFD=y
CONFIG_EVENTFD=y
CONFIG_SHMEM=y
CONFIG_AIO=y
CONFIG_VM_EVENT_COUNTERS=y
CONFIG_PCI_QUIRKS=y
CONFIG_SLUB_DEBUG=y
# CONFIG_SLAB is not set
CONFIG_SLUB=y
# CONFIG_SLOB is not set
CONFIG_PROFILING=y
CONFIG_TRACEPOINTS=y
CONFIG_MARKERS=y
CONFIG_OPROFILE=m
# CONFIG_OPROFILE_IBS is not set
CONFIG_HAVE_OPROFILE=y
CONFIG_KPROBES=y
CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS=y
CONFIG_KRETPROBES=y
CONFIG_HAVE_IOREMAP_PROT=y
CONFIG_HAVE_KPROBES=y
CONFIG_HAVE_KRETPROBES=y
CONFIG_HAVE_ARCH_TRACEHOOK=y
# CONFIG_HAVE_GENERIC_DMA_COHERENT is not set
CONFIG_SLABINFO=y
CONFIG_RT_MUTEXES=y
# CONFIG_TINY_SHMEM is not set
CONFIG_BASE_SMALL=0
CONFIG_MODULES=y
# CONFIG_MODULE_FORCE_LOAD is not set
CONFIG_MODULE_UNLOAD=y
# CONFIG_MODULE_FORCE_UNLOAD is not set
CONFIG_MODVERSIONS=y
CONFIG_MODULE_SRCVERSION_ALL=y
CONFIG_KMOD=y
CONFIG_STOP_MACHINE=y
CONFIG_BLOCK=y
CONFIG_BLK_DEV_IO_TRACE=y
# CONFIG_BLK_DEV_BSG is not set
CONFIG_BLK_DEV_INTEGRITY=y
CONFIG_BLOCK_COMPAT=y
#
# IO Schedulers
#
CONFIG_IOSCHED_NOOP=y
CONFIG_IOSCHED_AS=y
CONFIG_IOSCHED_DEADLINE=y
CONFIG_IOSCHED_CFQ=y
# CONFIG_DEFAULT_AS is not set
# CONFIG_DEFAULT_DEADLINE is not set
CONFIG_DEFAULT_CFQ=y
# CONFIG_DEFAULT_NOOP is not set
CONFIG_DEFAULT_IOSCHED="cfq"
CONFIG_PREEMPT_NOTIFIERS=y
CONFIG_CLASSIC_RCU=y
CONFIG_FREEZER=y
#
# Processor type and features
#
CONFIG_TICK_ONESHOT=y
CONFIG_NO_HZ=y
CONFIG_HIGH_RES_TIMERS=y
CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
CONFIG_SMP=y
CONFIG_X86_FIND_SMP_CONFIG=y
CONFIG_X86_MPPARSE=y
CONFIG_X86_PC=y
# CONFIG_X86_ELAN is not set
# CONFIG_X86_VOYAGER is not set
# CONFIG_X86_GENERICARCH is not set
# CONFIG_X86_VSMP is not set
CONFIG_SCHED_OMIT_FRAME_POINTER=y
CONFIG_PARAVIRT_GUEST=y
CONFIG_XEN=y
CONFIG_XEN_MAX_DOMAIN_MEMORY=32
CONFIG_XEN_SAVE_RESTORE=y
# CONFIG_XEN_DEBUG_FS is not set
CONFIG_XEN_DOM0=y
CONFIG_XEN_PRIVILEGED_GUEST=y
CONFIG_XEN_PCI=y
CONFIG_KVM_CLOCK=y
CONFIG_KVM_GUEST=y
CONFIG_PARAVIRT=y
CONFIG_PARAVIRT_CLOCK=y
# CONFIG_PARAVIRT_DEBUG is not set
# CONFIG_MEMTEST is not set
# CONFIG_M386 is not set
# CONFIG_M486 is not set
# CONFIG_M586 is not set
# CONFIG_M586TSC is not set
# CONFIG_M586MMX is not set
# CONFIG_M686 is not set
# CONFIG_MPENTIUMII is not set
# CONFIG_MPENTIUMIII is not set
# CONFIG_MPENTIUMM is not set
# CONFIG_MPENTIUM4 is not set
# CONFIG_MK6 is not set
# CONFIG_MK7 is not set
# CONFIG_MK8 is not set
# CONFIG_MCRUSOE is not set
# CONFIG_MEFFICEON is not set
# CONFIG_MWINCHIPC6 is not set
# CONFIG_MWINCHIP3D is not set
# CONFIG_MGEODEGX1 is not set
# CONFIG_MGEODE_LX is not set
# CONFIG_MCYRIXIII is not set
# CONFIG_MVIAC3_2 is not set
# CONFIG_MVIAC7 is not set
# CONFIG_MPSC is not set
# CONFIG_MCORE2 is not set
CONFIG_GENERIC_CPU=y
CONFIG_X86_CPU=y
CONFIG_X86_L1_CACHE_BYTES=128
CONFIG_X86_INTERNODE_CACHE_BYTES=128
CONFIG_X86_CMPXCHG=y
CONFIG_X86_L1_CACHE_SHIFT=7
CONFIG_X86_WP_WORKS_OK=y
CONFIG_X86_TSC=y
CONFIG_X86_CMPXCHG64=y
CONFIG_X86_CMOV=y
CONFIG_X86_MINIMUM_CPU_FAMILY=64
CONFIG_X86_DEBUGCTLMSR=y
CONFIG_CPU_SUP_INTEL=y
CONFIG_CPU_SUP_AMD=y
CONFIG_CPU_SUP_CENTAUR_64=y
CONFIG_X86_DS=y
CONFIG_X86_PTRACE_BTS=y
CONFIG_HPET_TIMER=y
CONFIG_HPET_EMULATE_RTC=y
CONFIG_DMI=y
CONFIG_GART_IOMMU=y
CONFIG_CALGARY_IOMMU=y
CONFIG_CALGARY_IOMMU_ENABLED_BY_DEFAULT=y
CONFIG_AMD_IOMMU=y
CONFIG_SWIOTLB=y
CONFIG_IOMMU_HELPER=y
CONFIG_NR_CPUS=64
# CONFIG_SCHED_SMT is not set
CONFIG_SCHED_MC=y
# CONFIG_PREEMPT_NONE is not set
CONFIG_PREEMPT_VOLUNTARY=y
# CONFIG_PREEMPT is not set
CONFIG_X86_LOCAL_APIC=y
CONFIG_X86_IO_APIC=y
# CONFIG_X86_REROUTE_FOR_BROKEN_BOOT_IRQS is not set
CONFIG_X86_MCE=y
CONFIG_X86_MCE_INTEL=y
CONFIG_X86_MCE_AMD=y
CONFIG_I8K=m
CONFIG_MICROCODE=m
CONFIG_MICROCODE_INTEL=y
# CONFIG_MICROCODE_AMD is not set
CONFIG_MICROCODE_OLD_INTERFACE=y
CONFIG_X86_MSR=m
CONFIG_X86_CPUID=m
CONFIG_ARCH_PHYS_ADDR_T_64BIT=y
CONFIG_DIRECT_GBPAGES=y
CONFIG_NUMA=y
CONFIG_K8_NUMA=y
CONFIG_X86_64_ACPI_NUMA=y
CONFIG_NODES_SPAN_OTHER_NODES=y
# CONFIG_NUMA_EMU is not set
CONFIG_NODES_SHIFT=6
CONFIG_ARCH_SPARSEMEM_DEFAULT=y
CONFIG_ARCH_SPARSEMEM_ENABLE=y
CONFIG_ARCH_SELECT_MEMORY_MODEL=y
CONFIG_ILLEGAL_POINTER_VALUE=0xdead000000000000
CONFIG_SELECT_MEMORY_MODEL=y
# CONFIG_FLATMEM_MANUAL is not set
# CONFIG_DISCONTIGMEM_MANUAL is not set
CONFIG_SPARSEMEM_MANUAL=y
CONFIG_SPARSEMEM=y
CONFIG_NEED_MULTIPLE_NODES=y
CONFIG_HAVE_MEMORY_PRESENT=y
CONFIG_SPARSEMEM_EXTREME=y
CONFIG_SPARSEMEM_VMEMMAP_ENABLE=y
CONFIG_SPARSEMEM_VMEMMAP=y
#
# Memory hotplug is currently incompatible with Software Suspend
#
CONFIG_PAGEFLAGS_EXTENDED=y
CONFIG_SPLIT_PTLOCK_CPUS=4
CONFIG_MIGRATION=y
CONFIG_RESOURCES_64BIT=y
CONFIG_PHYS_ADDR_T_64BIT=y
CONFIG_ZONE_DMA_FLAG=1
CONFIG_BOUNCE=y
CONFIG_VIRT_TO_BUS=y
CONFIG_UNEVICTABLE_LRU=y
CONFIG_MMU_NOTIFIER=y
# CONFIG_X86_CHECK_BIOS_CORRUPTION is not set
CONFIG_X86_RESERVE_LOW_64K=y
CONFIG_MTRR=y
CONFIG_MTRR_SANITIZER=y
CONFIG_MTRR_SANITIZER_ENABLE_DEFAULT=0
CONFIG_MTRR_SANITIZER_SPARE_REG_NR_DEFAULT=1
# CONFIG_X86_PAT is not set
CONFIG_EFI=y
CONFIG_SECCOMP=y
# CONFIG_CC_STACKPROTECTOR is not set
# CONFIG_HZ_100 is not set
CONFIG_HZ_250=y
# CONFIG_HZ_300 is not set
# CONFIG_HZ_1000 is not set
CONFIG_HZ=250
CONFIG_SCHED_HRTICK=y
CONFIG_KEXEC=y
CONFIG_CRASH_DUMP=y
CONFIG_PHYSICAL_START=0x200000
CONFIG_RELOCATABLE=y
CONFIG_PHYSICAL_ALIGN=0x200000
CONFIG_HOTPLUG_CPU=y
# CONFIG_COMPAT_VDSO is not set
# CONFIG_CMDLINE_BOOL is not set
CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y
CONFIG_HAVE_ARCH_EARLY_PFN_TO_NID=y
#
# Power management and ACPI options
#
CONFIG_ARCH_HIBERNATION_HEADER=y
CONFIG_PM=y
CONFIG_PM_DEBUG=y
# CONFIG_PM_VERBOSE is not set
CONFIG_CAN_PM_TRACE=y
CONFIG_PM_TRACE=y
CONFIG_PM_TRACE_RTC=y
CONFIG_PM_SLEEP_SMP=y
CONFIG_PM_SLEEP=y
CONFIG_SUSPEND=y
CONFIG_PM_TEST_SUSPEND=y
CONFIG_SUSPEND_FREEZER=y
CONFIG_HIBERNATION=y
CONFIG_PM_STD_PARTITION=""
CONFIG_ACPI=y
CONFIG_ACPI_SLEEP=y
CONFIG_ACPI_PROCFS=y
CONFIG_ACPI_PROCFS_POWER=y
CONFIG_ACPI_SYSFS_POWER=y
CONFIG_ACPI_PROC_EVENT=y
CONFIG_ACPI_AC=m
CONFIG_ACPI_BATTERY=m
CONFIG_ACPI_BUTTON=m
CONFIG_ACPI_VIDEO=m
CONFIG_ACPI_FAN=m
CONFIG_ACPI_DOCK=y
CONFIG_ACPI_PROCESSOR=m
CONFIG_ACPI_HOTPLUG_CPU=y
CONFIG_ACPI_THERMAL=m
CONFIG_ACPI_NUMA=y
CONFIG_ACPI_WMI=m
# CONFIG_ACPI_ASUS is not set
# CONFIG_ACPI_TOSHIBA is not set
CONFIG_ACPI_CUSTOM_DSDT_FILE=""
# CONFIG_ACPI_CUSTOM_DSDT is not set
CONFIG_ACPI_BLACKLIST_YEAR=0
# CONFIG_ACPI_DEBUG is not set
CONFIG_ACPI_PCI_SLOT=m
CONFIG_ACPI_SYSTEM=y
CONFIG_X86_PM_TIMER=y
CONFIG_ACPI_CONTAINER=m
CONFIG_ACPI_SBS=m
#
# CPU Frequency scaling
#
CONFIG_CPU_FREQ=y
CONFIG_CPU_FREQ_TABLE=m
# CONFIG_CPU_FREQ_DEBUG is not set
CONFIG_CPU_FREQ_STAT=m
CONFIG_CPU_FREQ_STAT_DETAILS=y
CONFIG_CPU_FREQ_DEFAULT_GOV_PERFORMANCE=y
# CONFIG_CPU_FREQ_DEFAULT_GOV_POWERSAVE is not set
# CONFIG_CPU_FREQ_DEFAULT_GOV_USERSPACE is not set
# CONFIG_CPU_FREQ_DEFAULT_GOV_ONDEMAND is not set
# CONFIG_CPU_FREQ_DEFAULT_GOV_CONSERVATIVE is not set
CONFIG_CPU_FREQ_GOV_PERFORMANCE=y
CONFIG_CPU_FREQ_GOV_POWERSAVE=m
CONFIG_CPU_FREQ_GOV_USERSPACE=m
CONFIG_CPU_FREQ_GOV_ONDEMAND=m
CONFIG_CPU_FREQ_GOV_CONSERVATIVE=m
#
# CPUFreq processor drivers
#
CONFIG_X86_ACPI_CPUFREQ=m
CONFIG_X86_POWERNOW_K8=m
CONFIG_X86_POWERNOW_K8_ACPI=y
# CONFIG_X86_SPEEDSTEP_CENTRINO is not set
# CONFIG_X86_P4_CLOCKMOD is not set
#
# shared options
#
# CONFIG_X86_ACPI_CPUFREQ_PROC_INTF is not set
# CONFIG_X86_SPEEDSTEP_LIB is not set
CONFIG_CPU_IDLE=y
CONFIG_CPU_IDLE_GOV_LADDER=y
CONFIG_CPU_IDLE_GOV_MENU=y
#
# Memory power savings
#
# CONFIG_I7300_IDLE is not set
#
# Bus options (PCI etc.)
#
CONFIG_PCI=y
CONFIG_PCI_DIRECT=y
CONFIG_PCI_MMCONFIG=y
CONFIG_PCI_XEN=y
CONFIG_PCI_DOMAINS=y
# CONFIG_DMAR is not set
# CONFIG_INTR_REMAP is not set
CONFIG_PCIEPORTBUS=y
CONFIG_HOTPLUG_PCI_PCIE=m
CONFIG_PCIEAER=y
# CONFIG_PCIEASPM is not set
CONFIG_ARCH_SUPPORTS_MSI=y
CONFIG_PCI_MSI=y
CONFIG_PCI_LEGACY=y
# CONFIG_PCI_DEBUG is not set
CONFIG_HT_IRQ=y
CONFIG_ISA_DMA_API=y
CONFIG_K8_NB=y
CONFIG_PCCARD=m
# CONFIG_PCMCIA_DEBUG is not set
CONFIG_PCMCIA=m
CONFIG_PCMCIA_LOAD_CIS=y
CONFIG_PCMCIA_IOCTL=y
CONFIG_CARDBUS=y
#
# PC-card bridges
#
CONFIG_YENTA=m
CONFIG_YENTA_O2=y
CONFIG_YENTA_RICOH=y
CONFIG_YENTA_TI=y
CONFIG_YENTA_ENE_TUNE=y
CONFIG_YENTA_TOSHIBA=y
CONFIG_PD6729=m
CONFIG_I82092=m
CONFIG_PCCARD_NONSTATIC=m
CONFIG_HOTPLUG_PCI=m
CONFIG_HOTPLUG_PCI_FAKE=m
CONFIG_HOTPLUG_PCI_ACPI=m
CONFIG_HOTPLUG_PCI_ACPI_IBM=m
CONFIG_HOTPLUG_PCI_CPCI=y
CONFIG_HOTPLUG_PCI_CPCI_ZT5550=m
CONFIG_HOTPLUG_PCI_CPCI_GENERIC=m
CONFIG_HOTPLUG_PCI_SHPC=m
#
# Executable file formats / Emulations
#
CONFIG_BINFMT_ELF=y
CONFIG_COMPAT_BINFMT_ELF=y
# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set
# CONFIG_HAVE_AOUT is not set
CONFIG_BINFMT_MISC=m
CONFIG_IA32_EMULATION=y
CONFIG_IA32_AOUT=m
CONFIG_COMPAT=y
CONFIG_COMPAT_FOR_U64_ALIGNMENT=y
CONFIG_SYSVIPC_COMPAT=y
CONFIG_NET=y
#
# Networking options
#
CONFIG_PACKET=m
CONFIG_PACKET_MMAP=y
CONFIG_UNIX=y
CONFIG_XFRM=y
CONFIG_XFRM_USER=m
# CONFIG_XFRM_SUB_POLICY is not set
# CONFIG_XFRM_MIGRATE is not set
# CONFIG_XFRM_STATISTICS is not set
CONFIG_XFRM_IPCOMP=m
CONFIG_NET_KEY=m
# CONFIG_NET_KEY_MIGRATE is not set
CONFIG_INET=y
CONFIG_IP_MULTICAST=y
CONFIG_IP_ADVANCED_ROUTER=y
CONFIG_ASK_IP_FIB_HASH=y
# CONFIG_IP_FIB_TRIE is not set
CONFIG_IP_FIB_HASH=y
CONFIG_IP_MULTIPLE_TABLES=y
CONFIG_IP_ROUTE_MULTIPATH=y
CONFIG_IP_ROUTE_VERBOSE=y
# CONFIG_IP_PNP is not set
CONFIG_NET_IPIP=m
CONFIG_NET_IPGRE=m
CONFIG_NET_IPGRE_BROADCAST=y
CONFIG_IP_MROUTE=y
CONFIG_IP_PIMSM_V1=y
CONFIG_IP_PIMSM_V2=y
# CONFIG_ARPD is not set
CONFIG_SYN_COOKIES=y
CONFIG_INET_AH=m
CONFIG_INET_ESP=m
CONFIG_INET_IPCOMP=m
CONFIG_INET_XFRM_TUNNEL=m
CONFIG_INET_TUNNEL=m
CONFIG_INET_XFRM_MODE_TRANSPORT=m
CONFIG_INET_XFRM_MODE_TUNNEL=m
CONFIG_INET_XFRM_MODE_BEET=m
CONFIG_INET_LRO=m
CONFIG_INET_DIAG=y
CONFIG_INET_TCP_DIAG=y
CONFIG_TCP_CONG_ADVANCED=y
CONFIG_TCP_CONG_BIC=m
CONFIG_TCP_CONG_CUBIC=y
CONFIG_TCP_CONG_WESTWOOD=m
CONFIG_TCP_CONG_HTCP=m
CONFIG_TCP_CONG_HSTCP=m
CONFIG_TCP_CONG_HYBLA=m
CONFIG_TCP_CONG_VEGAS=m
CONFIG_TCP_CONG_SCALABLE=m
CONFIG_TCP_CONG_LP=m
CONFIG_TCP_CONG_VENO=m
CONFIG_TCP_CONG_YEAH=m
CONFIG_TCP_CONG_ILLINOIS=m
# CONFIG_DEFAULT_BIC is not set
CONFIG_DEFAULT_CUBIC=y
# CONFIG_DEFAULT_HTCP is not set
# CONFIG_DEFAULT_VEGAS is not set
# CONFIG_DEFAULT_WESTWOOD is not set
# CONFIG_DEFAULT_RENO is not set
CONFIG_DEFAULT_TCP_CONG="cubic"
CONFIG_TCP_MD5SIG=y
CONFIG_IPV6=m
CONFIG_IPV6_PRIVACY=y
# CONFIG_IPV6_ROUTER_PREF is not set
# CONFIG_IPV6_OPTIMISTIC_DAD is not set
CONFIG_INET6_AH=m
CONFIG_INET6_ESP=m
CONFIG_INET6_IPCOMP=m
# CONFIG_IPV6_MIP6 is not set
CONFIG_INET6_XFRM_TUNNEL=m
CONFIG_INET6_TUNNEL=m
CONFIG_INET6_XFRM_MODE_TRANSPORT=m
CONFIG_INET6_XFRM_MODE_TUNNEL=m
CONFIG_INET6_XFRM_MODE_BEET=m
CONFIG_INET6_XFRM_MODE_ROUTEOPTIMIZATION=m
CONFIG_IPV6_SIT=m
CONFIG_IPV6_NDISC_NODETYPE=y
CONFIG_IPV6_TUNNEL=m
CONFIG_IPV6_MULTIPLE_TABLES=y
# CONFIG_IPV6_SUBTREES is not set
# CONFIG_IPV6_MROUTE is not set
CONFIG_NETLABEL=y
CONFIG_NETWORK_SECMARK=y
CONFIG_NETFILTER=y
# CONFIG_NETFILTER_DEBUG is not set
CONFIG_NETFILTER_ADVANCED=y
CONFIG_BRIDGE_NETFILTER=y
#
# Core Netfilter Configuration
#
CONFIG_NETFILTER_NETLINK=m
CONFIG_NETFILTER_NETLINK_QUEUE=m
CONFIG_NETFILTER_NETLINK_LOG=m
CONFIG_NF_CONNTRACK=m
CONFIG_NF_CT_ACCT=y
CONFIG_NF_CONNTRACK_MARK=y
CONFIG_NF_CONNTRACK_SECMARK=y
CONFIG_NF_CONNTRACK_EVENTS=y
# CONFIG_NF_CT_PROTO_DCCP is not set
CONFIG_NF_CT_PROTO_GRE=m
CONFIG_NF_CT_PROTO_SCTP=m
CONFIG_NF_CT_PROTO_UDPLITE=m
CONFIG_NF_CONNTRACK_AMANDA=m
CONFIG_NF_CONNTRACK_FTP=m
CONFIG_NF_CONNTRACK_H323=m
CONFIG_NF_CONNTRACK_IRC=m
CONFIG_NF_CONNTRACK_NETBIOS_NS=m
CONFIG_NF_CONNTRACK_PPTP=m
# CONFIG_NF_CONNTRACK_SANE is not set
CONFIG_NF_CONNTRACK_SIP=m
CONFIG_NF_CONNTRACK_TFTP=m
CONFIG_NF_CT_NETLINK=m
# CONFIG_NETFILTER_TPROXY is not set
CONFIG_NETFILTER_XTABLES=m
CONFIG_NETFILTER_XT_TARGET_CLASSIFY=m
CONFIG_NETFILTER_XT_TARGET_CONNMARK=m
CONFIG_NETFILTER_XT_TARGET_CONNSECMARK=m
CONFIG_NETFILTER_XT_TARGET_DSCP=m
CONFIG_NETFILTER_XT_TARGET_MARK=m
CONFIG_NETFILTER_XT_TARGET_NFLOG=m
CONFIG_NETFILTER_XT_TARGET_NFQUEUE=m
CONFIG_NETFILTER_XT_TARGET_NOTRACK=m
CONFIG_NETFILTER_XT_TARGET_RATEEST=m
CONFIG_NETFILTER_XT_TARGET_TRACE=m
CONFIG_NETFILTER_XT_TARGET_SECMARK=m
CONFIG_NETFILTER_XT_TARGET_TCPMSS=m
# CONFIG_NETFILTER_XT_TARGET_TCPOPTSTRIP is not set
CONFIG_NETFILTER_XT_MATCH_COMMENT=m
CONFIG_NETFILTER_XT_MATCH_CONNBYTES=m
CONFIG_NETFILTER_XT_MATCH_CONNLIMIT=m
CONFIG_NETFILTER_XT_MATCH_CONNMARK=m
CONFIG_NETFILTER_XT_MATCH_CONNTRACK=m
CONFIG_NETFILTER_XT_MATCH_DCCP=m
CONFIG_NETFILTER_XT_MATCH_DSCP=m
CONFIG_NETFILTER_XT_MATCH_ESP=m
CONFIG_NETFILTER_XT_MATCH_HASHLIMIT=m
CONFIG_NETFILTER_XT_MATCH_HELPER=m
CONFIG_NETFILTER_XT_MATCH_IPRANGE=m
CONFIG_NETFILTER_XT_MATCH_LENGTH=m
CONFIG_NETFILTER_XT_MATCH_LIMIT=m
CONFIG_NETFILTER_XT_MATCH_MAC=m
CONFIG_NETFILTER_XT_MATCH_MARK=m
CONFIG_NETFILTER_XT_MATCH_MULTIPORT=m
CONFIG_NETFILTER_XT_MATCH_OWNER=m
CONFIG_NETFILTER_XT_MATCH_POLICY=m
CONFIG_NETFILTER_XT_MATCH_PHYSDEV=m
CONFIG_NETFILTER_XT_MATCH_PKTTYPE=m
CONFIG_NETFILTER_XT_MATCH_QUOTA=m
CONFIG_NETFILTER_XT_MATCH_RATEEST=m
CONFIG_NETFILTER_XT_MATCH_REALM=m
# CONFIG_NETFILTER_XT_MATCH_RECENT is not set
CONFIG_NETFILTER_XT_MATCH_SCTP=m
CONFIG_NETFILTER_XT_MATCH_STATE=m
CONFIG_NETFILTER_XT_MATCH_STATISTIC=m
CONFIG_NETFILTER_XT_MATCH_STRING=m
CONFIG_NETFILTER_XT_MATCH_TCPMSS=m
CONFIG_NETFILTER_XT_MATCH_TIME=m
CONFIG_NETFILTER_XT_MATCH_U32=m
CONFIG_IP_VS=m
# CONFIG_IP_VS_IPV6 is not set
# CONFIG_IP_VS_DEBUG is not set
CONFIG_IP_VS_TAB_BITS=12
#
# IPVS transport protocol load balancing support
#
CONFIG_IP_VS_PROTO_TCP=y
CONFIG_IP_VS_PROTO_UDP=y
CONFIG_IP_VS_PROTO_AH_ESP=y
CONFIG_IP_VS_PROTO_ESP=y
CONFIG_IP_VS_PROTO_AH=y
#
# IPVS scheduler
#
CONFIG_IP_VS_RR=m
CONFIG_IP_VS_WRR=m
CONFIG_IP_VS_LC=m
CONFIG_IP_VS_WLC=m
CONFIG_IP_VS_LBLC=m
CONFIG_IP_VS_LBLCR=m
CONFIG_IP_VS_DH=m
CONFIG_IP_VS_SH=m
CONFIG_IP_VS_SED=m
CONFIG_IP_VS_NQ=m
#
# IPVS application helper
#
CONFIG_IP_VS_FTP=m
#
# IP: Netfilter Configuration
#
CONFIG_NF_DEFRAG_IPV4=m
CONFIG_NF_CONNTRACK_IPV4=m
CONFIG_NF_CONNTRACK_PROC_COMPAT=y
CONFIG_IP_NF_QUEUE=m
CONFIG_IP_NF_IPTABLES=m
CONFIG_IP_NF_MATCH_ADDRTYPE=m
CONFIG_IP_NF_MATCH_AH=m
CONFIG_IP_NF_MATCH_ECN=m
CONFIG_IP_NF_MATCH_TTL=m
CONFIG_IP_NF_FILTER=m
CONFIG_IP_NF_TARGET_REJECT=m
CONFIG_IP_NF_TARGET_LOG=m
CONFIG_IP_NF_TARGET_ULOG=m
CONFIG_NF_NAT=m
CONFIG_NF_NAT_NEEDED=y
CONFIG_IP_NF_TARGET_MASQUERADE=m
CONFIG_IP_NF_TARGET_NETMAP=m
CONFIG_IP_NF_TARGET_REDIRECT=m
CONFIG_NF_NAT_SNMP_BASIC=m
CONFIG_NF_NAT_PROTO_GRE=m
CONFIG_NF_NAT_PROTO_UDPLITE=m
CONFIG_NF_NAT_PROTO_SCTP=m
CONFIG_NF_NAT_FTP=m
CONFIG_NF_NAT_IRC=m
CONFIG_NF_NAT_TFTP=m
CONFIG_NF_NAT_AMANDA=m
CONFIG_NF_NAT_PPTP=m
CONFIG_NF_NAT_H323=m
CONFIG_NF_NAT_SIP=m
CONFIG_IP_NF_MANGLE=m
CONFIG_IP_NF_TARGET_CLUSTERIP=m
CONFIG_IP_NF_TARGET_ECN=m
CONFIG_IP_NF_TARGET_TTL=m
CONFIG_IP_NF_RAW=m
CONFIG_IP_NF_SECURITY=m
CONFIG_IP_NF_ARPTABLES=m
CONFIG_IP_NF_ARPFILTER=m
CONFIG_IP_NF_ARP_MANGLE=m
#
# IPv6: Netfilter Configuration
#
CONFIG_NF_CONNTRACK_IPV6=m
CONFIG_IP6_NF_QUEUE=m
CONFIG_IP6_NF_IPTABLES=m
CONFIG_IP6_NF_MATCH_AH=m
CONFIG_IP6_NF_MATCH_EUI64=m
CONFIG_IP6_NF_MATCH_FRAG=m
CONFIG_IP6_NF_MATCH_OPTS=m
CONFIG_IP6_NF_MATCH_HL=m
CONFIG_IP6_NF_MATCH_IPV6HEADER=m
CONFIG_IP6_NF_MATCH_MH=m
CONFIG_IP6_NF_MATCH_RT=m
CONFIG_IP6_NF_TARGET_LOG=m
CONFIG_IP6_NF_FILTER=m
CONFIG_IP6_NF_TARGET_REJECT=m
CONFIG_IP6_NF_MANGLE=m
CONFIG_IP6_NF_TARGET_HL=m
CONFIG_IP6_NF_RAW=m
CONFIG_IP6_NF_SECURITY=m
#
# DECnet: Netfilter Configuration
#
CONFIG_DECNET_NF_GRABULATOR=m
CONFIG_BRIDGE_NF_EBTABLES=m
CONFIG_BRIDGE_EBT_BROUTE=m
CONFIG_BRIDGE_EBT_T_FILTER=m
CONFIG_BRIDGE_EBT_T_NAT=m
CONFIG_BRIDGE_EBT_802_3=m
CONFIG_BRIDGE_EBT_AMONG=m
CONFIG_BRIDGE_EBT_ARP=m
CONFIG_BRIDGE_EBT_IP=m
CONFIG_BRIDGE_EBT_IP6=m
CONFIG_BRIDGE_EBT_LIMIT=m
CONFIG_BRIDGE_EBT_MARK=m
CONFIG_BRIDGE_EBT_PKTTYPE=m
CONFIG_BRIDGE_EBT_STP=m
CONFIG_BRIDGE_EBT_VLAN=m
CONFIG_BRIDGE_EBT_ARPREPLY=m
CONFIG_BRIDGE_EBT_DNAT=m
CONFIG_BRIDGE_EBT_MARK_T=m
CONFIG_BRIDGE_EBT_REDIRECT=m
CONFIG_BRIDGE_EBT_SNAT=m
CONFIG_BRIDGE_EBT_LOG=m
CONFIG_BRIDGE_EBT_ULOG=m
CONFIG_BRIDGE_EBT_NFLOG=m
CONFIG_IP_DCCP=m
CONFIG_INET_DCCP_DIAG=m
CONFIG_IP_DCCP_ACKVEC=y
#
# DCCP CCIDs Configuration (EXPERIMENTAL)
#
CONFIG_IP_DCCP_CCID2=m
# CONFIG_IP_DCCP_CCID2_DEBUG is not set
CONFIG_IP_DCCP_CCID3=m
# CONFIG_IP_DCCP_CCID3_DEBUG is not set
CONFIG_IP_DCCP_CCID3_RTO=100
CONFIG_IP_DCCP_TFRC_LIB=m
#
# DCCP Kernel Hacking
#
# CONFIG_IP_DCCP_DEBUG is not set
CONFIG_NET_DCCPPROBE=m
CONFIG_IP_SCTP=m
# CONFIG_SCTP_DBG_MSG is not set
# CONFIG_SCTP_DBG_OBJCNT is not set
# CONFIG_SCTP_HMAC_NONE is not set
# CONFIG_SCTP_HMAC_SHA1 is not set
CONFIG_SCTP_HMAC_MD5=y
CONFIG_TIPC=m
# CONFIG_TIPC_ADVANCED is not set
# CONFIG_TIPC_DEBUG is not set
CONFIG_ATM=y
CONFIG_ATM_CLIP=y
# CONFIG_ATM_CLIP_NO_ICMP is not set
CONFIG_ATM_LANE=m
CONFIG_ATM_MPOA=m
CONFIG_ATM_BR2684=m
# CONFIG_ATM_BR2684_IPFILTER is not set
CONFIG_STP=m
CONFIG_GARP=m
CONFIG_BRIDGE=m
# CONFIG_NET_DSA is not set
CONFIG_VLAN_8021Q=m
CONFIG_VLAN_8021Q_GVRP=y
CONFIG_DECNET=m
# CONFIG_DECNET_ROUTER is not set
CONFIG_LLC=y
CONFIG_LLC2=m
CONFIG_IPX=m
# CONFIG_IPX_INTERN is not set
CONFIG_ATALK=m
CONFIG_DEV_APPLETALK=m
CONFIG_IPDDP=m
CONFIG_IPDDP_ENCAP=y
CONFIG_IPDDP_DECAP=y
CONFIG_X25=m
CONFIG_LAPB=m
CONFIG_ECONET=m
CONFIG_ECONET_AUNUDP=y
CONFIG_ECONET_NATIVE=y
CONFIG_WAN_ROUTER=m
CONFIG_NET_SCHED=y
#
# Queueing/Scheduling
#
CONFIG_NET_SCH_CBQ=m
CONFIG_NET_SCH_HTB=m
CONFIG_NET_SCH_HFSC=m
CONFIG_NET_SCH_ATM=m
CONFIG_NET_SCH_PRIO=m
# CONFIG_NET_SCH_MULTIQ is not set
CONFIG_NET_SCH_RED=m
CONFIG_NET_SCH_SFQ=m
CONFIG_NET_SCH_TEQL=m
CONFIG_NET_SCH_TBF=m
CONFIG_NET_SCH_GRED=m
CONFIG_NET_SCH_DSMARK=m
CONFIG_NET_SCH_NETEM=m
CONFIG_NET_SCH_INGRESS=m
#
# Classification
#
CONFIG_NET_CLS=y
CONFIG_NET_CLS_BASIC=m
CONFIG_NET_CLS_TCINDEX=m
CONFIG_NET_CLS_ROUTE4=m
CONFIG_NET_CLS_ROUTE=y
CONFIG_NET_CLS_FW=m
CONFIG_NET_CLS_U32=m
# CONFIG_CLS_U32_PERF is not set
CONFIG_CLS_U32_MARK=y
CONFIG_NET_CLS_RSVP=m
CONFIG_NET_CLS_RSVP6=m
# CONFIG_NET_CLS_FLOW is not set
CONFIG_NET_EMATCH=y
CONFIG_NET_EMATCH_STACK=32
CONFIG_NET_EMATCH_CMP=m
CONFIG_NET_EMATCH_NBYTE=m
CONFIG_NET_EMATCH_U32=m
CONFIG_NET_EMATCH_META=m
CONFIG_NET_EMATCH_TEXT=m
CONFIG_NET_CLS_ACT=y
CONFIG_NET_ACT_POLICE=m
CONFIG_NET_ACT_GACT=m
CONFIG_GACT_PROB=y
CONFIG_NET_ACT_MIRRED=m
CONFIG_NET_ACT_IPT=m
CONFIG_NET_ACT_NAT=m
CONFIG_NET_ACT_PEDIT=m
CONFIG_NET_ACT_SIMP=m
# CONFIG_NET_ACT_SKBEDIT is not set
# CONFIG_NET_CLS_IND is not set
CONFIG_NET_SCH_FIFO=y
#
# Network testing
#
CONFIG_NET_PKTGEN=m
CONFIG_NET_TCPPROBE=m
CONFIG_HAMRADIO=y
#
# Packet Radio protocols
#
CONFIG_AX25=m
CONFIG_AX25_DAMA_SLAVE=y
CONFIG_NETROM=m
CONFIG_ROSE=m
#
# AX.25 network device drivers
#
CONFIG_MKISS=m
CONFIG_6PACK=m
CONFIG_BPQETHER=m
CONFIG_BAYCOM_SER_FDX=m
CONFIG_BAYCOM_SER_HDX=m
CONFIG_BAYCOM_PAR=m
CONFIG_YAM=m
# CONFIG_CAN is not set
CONFIG_IRDA=m
#
# IrDA protocols
#
CONFIG_IRLAN=m
CONFIG_IRNET=m
CONFIG_IRCOMM=m
CONFIG_IRDA_ULTRA=y
#
# IrDA options
#
CONFIG_IRDA_CACHE_LAST_LSAP=y
CONFIG_IRDA_FAST_RR=y
CONFIG_IRDA_DEBUG=y
#
# Infrared-port device drivers
#
#
# SIR device drivers
#
CONFIG_IRTTY_SIR=m
#
# Dongle support
#
CONFIG_DONGLE=y
CONFIG_ESI_DONGLE=m
CONFIG_ACTISYS_DONGLE=m
CONFIG_TEKRAM_DONGLE=m
# CONFIG_TOIM3232_DONGLE is not set
CONFIG_LITELINK_DONGLE=m
CONFIG_MA600_DONGLE=m
CONFIG_GIRBIL_DONGLE=m
CONFIG_MCP2120_DONGLE=m
CONFIG_OLD_BELKIN_DONGLE=m
CONFIG_ACT200L_DONGLE=m
CONFIG_KINGSUN_DONGLE=m
CONFIG_KSDAZZLE_DONGLE=m
CONFIG_KS959_DONGLE=m
#
# FIR device drivers
#
CONFIG_USB_IRDA=m
CONFIG_SIGMATEL_FIR=m
CONFIG_NSC_FIR=m
CONFIG_WINBOND_FIR=m
CONFIG_SMC_IRCC_FIR=m
CONFIG_ALI_FIR=m
CONFIG_VLSI_FIR=m
CONFIG_VIA_FIR=m
CONFIG_MCS_FIR=m
CONFIG_BT=m
CONFIG_BT_L2CAP=m
CONFIG_BT_SCO=m
CONFIG_BT_RFCOMM=m
CONFIG_BT_RFCOMM_TTY=y
CONFIG_BT_BNEP=m
CONFIG_BT_BNEP_MC_FILTER=y
CONFIG_BT_BNEP_PROTO_FILTER=y
CONFIG_BT_CMTP=m
CONFIG_BT_HIDP=m
#
# Bluetooth device drivers
#
CONFIG_BT_HCIBTUSB=m
CONFIG_BT_HCIBTSDIO=m
CONFIG_BT_HCIUART=m
CONFIG_BT_HCIUART_H4=y
CONFIG_BT_HCIUART_BCSP=y
CONFIG_BT_HCIUART_LL=y
CONFIG_BT_HCIBCM203X=m
CONFIG_BT_HCIBPA10X=m
CONFIG_BT_HCIBFUSB=m
CONFIG_BT_HCIDTL1=m
CONFIG_BT_HCIBT3C=m
CONFIG_BT_HCIBLUECARD=m
CONFIG_BT_HCIBTUART=m
CONFIG_BT_HCIVHCI=m
CONFIG_AF_RXRPC=m
# CONFIG_AF_RXRPC_DEBUG is not set
CONFIG_RXKAD=m
# CONFIG_PHONET is not set
CONFIG_FIB_RULES=y
CONFIG_WIRELESS=y
CONFIG_CFG80211=m
CONFIG_NL80211=y
CONFIG_WIRELESS_OLD_REGULATORY=y
CONFIG_WIRELESS_EXT=y
CONFIG_WIRELESS_EXT_SYSFS=y
CONFIG_MAC80211=m
#
# Rate control algorithm selection
#
CONFIG_MAC80211_RC_PID=y
# CONFIG_MAC80211_RC_MINSTREL is not set
CONFIG_MAC80211_RC_DEFAULT_PID=y
# CONFIG_MAC80211_RC_DEFAULT_MINSTREL is not set
CONFIG_MAC80211_RC_DEFAULT="pid"
CONFIG_MAC80211_MESH=y
CONFIG_MAC80211_LEDS=y
CONFIG_MAC80211_DEBUGFS=y
# CONFIG_MAC80211_DEBUG_MENU is not set
CONFIG_IEEE80211=m
# CONFIG_IEEE80211_DEBUG is not set
CONFIG_IEEE80211_CRYPT_WEP=m
CONFIG_IEEE80211_CRYPT_CCMP=m
CONFIG_IEEE80211_CRYPT_TKIP=m
CONFIG_RFKILL=m
CONFIG_RFKILL_INPUT=m
CONFIG_RFKILL_LEDS=y
#
# Device Drivers
#
#
# Generic Driver Options
#
CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
# CONFIG_STANDALONE is not set
CONFIG_PREVENT_FIRMWARE_BUILD=y
CONFIG_FW_LOADER=y
# CONFIG_FIRMWARE_IN_KERNEL is not set
CONFIG_EXTRA_FIRMWARE=""
# CONFIG_DEBUG_DRIVER is not set
# CONFIG_DEBUG_DEVRES is not set
# CONFIG_SYS_HYPERVISOR is not set
CONFIG_CONNECTOR=y
CONFIG_PROC_EVENTS=y
CONFIG_MTD=m
# CONFIG_MTD_DEBUG is not set
CONFIG_MTD_CONCAT=m
CONFIG_MTD_PARTITIONS=y
CONFIG_MTD_REDBOOT_PARTS=m
CONFIG_MTD_REDBOOT_DIRECTORY_BLOCK=-1
# CONFIG_MTD_REDBOOT_PARTS_UNALLOCATED is not set
# CONFIG_MTD_REDBOOT_PARTS_READONLY is not set
CONFIG_MTD_AR7_PARTS=m
#
# User Modules And Translation Layers
#
CONFIG_MTD_CHAR=m
CONFIG_MTD_BLKDEVS=m
CONFIG_MTD_BLOCK=m
CONFIG_MTD_BLOCK_RO=m
CONFIG_FTL=m
CONFIG_NFTL=m
CONFIG_NFTL_RW=y
CONFIG_INFTL=m
CONFIG_RFD_FTL=m
CONFIG_SSFDC=m
CONFIG_MTD_OOPS=m
#
# RAM/ROM/Flash chip drivers
#
CONFIG_MTD_CFI=m
CONFIG_MTD_JEDECPROBE=m
CONFIG_MTD_GEN_PROBE=m
# CONFIG_MTD_CFI_ADV_OPTIONS is not set
CONFIG_MTD_MAP_BANK_WIDTH_1=y
CONFIG_MTD_MAP_BANK_WIDTH_2=y
CONFIG_MTD_MAP_BANK_WIDTH_4=y
# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set
# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set
# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set
CONFIG_MTD_CFI_I1=y
CONFIG_MTD_CFI_I2=y
# CONFIG_MTD_CFI_I4 is not set
# CONFIG_MTD_CFI_I8 is not set
CONFIG_MTD_CFI_INTELEXT=m
CONFIG_MTD_CFI_AMDSTD=m
CONFIG_MTD_CFI_STAA=m
CONFIG_MTD_CFI_UTIL=m
CONFIG_MTD_RAM=m
CONFIG_MTD_ROM=m
CONFIG_MTD_ABSENT=m
#
# Mapping drivers for chip access
#
CONFIG_MTD_COMPLEX_MAPPINGS=y
CONFIG_MTD_PHYSMAP=m
CONFIG_MTD_PHYSMAP_START=0x8000000
CONFIG_MTD_PHYSMAP_LEN=0x4000000
CONFIG_MTD_PHYSMAP_BANKWIDTH=2
CONFIG_MTD_SC520CDP=m
CONFIG_MTD_NETSC520=m
CONFIG_MTD_TS5500=m
CONFIG_MTD_SBC_GXX=m
CONFIG_MTD_AMD76XROM=m
CONFIG_MTD_ICHXROM=m
CONFIG_MTD_ESB2ROM=m
CONFIG_MTD_CK804XROM=m
CONFIG_MTD_SCB2_FLASH=m
CONFIG_MTD_NETtel=m
CONFIG_MTD_DILNETPC=m
CONFIG_MTD_DILNETPC_BOOTSIZE=0x80000
CONFIG_MTD_L440GX=m
CONFIG_MTD_PCI=m
CONFIG_MTD_INTEL_VR_NOR=m
CONFIG_MTD_PLATRAM=m
#
# Self-contained MTD device drivers
#
CONFIG_MTD_PMC551=m
# CONFIG_MTD_PMC551_BUGFIX is not set
# CONFIG_MTD_PMC551_DEBUG is not set
CONFIG_MTD_DATAFLASH=m
# CONFIG_MTD_DATAFLASH_WRITE_VERIFY is not set
# CONFIG_MTD_DATAFLASH_OTP is not set
CONFIG_MTD_M25P80=m
CONFIG_M25PXX_USE_FAST_READ=y
CONFIG_MTD_SLRAM=m
CONFIG_MTD_PHRAM=m
CONFIG_MTD_MTDRAM=m
CONFIG_MTDRAM_TOTAL_SIZE=4096
CONFIG_MTDRAM_ERASE_SIZE=128
CONFIG_MTD_BLOCK2MTD=m
#
# Disk-On-Chip Device Drivers
#
CONFIG_MTD_DOC2000=m
CONFIG_MTD_DOC2001=m
CONFIG_MTD_DOC2001PLUS=m
CONFIG_MTD_DOCPROBE=m
CONFIG_MTD_DOCECC=m
# CONFIG_MTD_DOCPROBE_ADVANCED is not set
CONFIG_MTD_DOCPROBE_ADDRESS=0
CONFIG_MTD_NAND=m
# CONFIG_MTD_NAND_VERIFY_WRITE is not set
# CONFIG_MTD_NAND_ECC_SMC is not set
# CONFIG_MTD_NAND_MUSEUM_IDS is not set
CONFIG_MTD_NAND_IDS=m
CONFIG_MTD_NAND_DISKONCHIP=m
# CONFIG_MTD_NAND_DISKONCHIP_PROBE_ADVANCED is not set
CONFIG_MTD_NAND_DISKONCHIP_PROBE_ADDRESS=0
# CONFIG_MTD_NAND_DISKONCHIP_BBTWRITE is not set
CONFIG_MTD_NAND_CAFE=m
CONFIG_MTD_NAND_NANDSIM=m
CONFIG_MTD_NAND_PLATFORM=m
CONFIG_MTD_ALAUDA=m
CONFIG_MTD_ONENAND=m
CONFIG_MTD_ONENAND_VERIFY_WRITE=y
# CONFIG_MTD_ONENAND_OTP is not set
CONFIG_MTD_ONENAND_2X_PROGRAM=y
CONFIG_MTD_ONENAND_SIM=m
#
# UBI - Unsorted block images
#
CONFIG_MTD_UBI=m
CONFIG_MTD_UBI_WL_THRESHOLD=4096
CONFIG_MTD_UBI_BEB_RESERVE=1
CONFIG_MTD_UBI_GLUEBI=y
#
# UBI debugging options
#
# CONFIG_MTD_UBI_DEBUG is not set
CONFIG_PARPORT=m
CONFIG_PARPORT_PC=m
CONFIG_PARPORT_SERIAL=m
CONFIG_PARPORT_PC_FIFO=y
# CONFIG_PARPORT_PC_SUPERIO is not set
CONFIG_PARPORT_PC_PCMCIA=m
# CONFIG_PARPORT_GSC is not set
CONFIG_PARPORT_AX88796=m
CONFIG_PARPORT_1284=y
CONFIG_PARPORT_NOT_PC=y
CONFIG_PNP=y
CONFIG_PNP_DEBUG_MESSAGES=y
#
# Protocols
#
CONFIG_PNPACPI=y
CONFIG_BLK_DEV=y
CONFIG_BLK_DEV_FD=m
CONFIG_PARIDE=m
#
# Parallel IDE high-level drivers
#
CONFIG_PARIDE_PD=m
CONFIG_PARIDE_PCD=m
CONFIG_PARIDE_PF=m
CONFIG_PARIDE_PT=m
CONFIG_PARIDE_PG=m
#
# Parallel IDE protocol modules
#
CONFIG_PARIDE_ATEN=m
CONFIG_PARIDE_BPCK=m
CONFIG_PARIDE_COMM=m
CONFIG_PARIDE_DSTR=m
CONFIG_PARIDE_FIT2=m
CONFIG_PARIDE_FIT3=m
CONFIG_PARIDE_EPAT=m
# CONFIG_PARIDE_EPATC8 is not set
CONFIG_PARIDE_EPIA=m
CONFIG_PARIDE_FRIQ=m
CONFIG_PARIDE_FRPW=m
CONFIG_PARIDE_KBIC=m
CONFIG_PARIDE_KTTI=m
CONFIG_PARIDE_ON20=m
CONFIG_PARIDE_ON26=m
CONFIG_BLK_CPQ_DA=m
CONFIG_BLK_CPQ_CISS_DA=m
CONFIG_CISS_SCSI_TAPE=y
CONFIG_BLK_DEV_DAC960=m
CONFIG_BLK_DEV_UMEM=m
# CONFIG_BLK_DEV_COW_COMMON is not set
CONFIG_BLK_DEV_LOOP=m
CONFIG_BLK_DEV_CRYPTOLOOP=m
CONFIG_BLK_DEV_NBD=m
CONFIG_BLK_DEV_SX8=m
CONFIG_BLK_DEV_UB=m
CONFIG_BLK_DEV_RAM=y
CONFIG_BLK_DEV_RAM_COUNT=16
CONFIG_BLK_DEV_RAM_SIZE=65536
# CONFIG_BLK_DEV_XIP is not set
CONFIG_CDROM_PKTCDVD=m
CONFIG_CDROM_PKTCDVD_BUFFERS=8
# CONFIG_CDROM_PKTCDVD_WCACHE is not set
CONFIG_ATA_OVER_ETH=m
CONFIG_XEN_BLKDEV_FRONTEND=m
CONFIG_VIRTIO_BLK=m
# CONFIG_BLK_DEV_HD is not set
CONFIG_MISC_DEVICES=y
CONFIG_IBM_ASM=m
CONFIG_PHANTOM=m
CONFIG_EEPROM_93CX6=m
CONFIG_SGI_IOC4=m
CONFIG_TIFM_CORE=m
CONFIG_TIFM_7XX1=m
CONFIG_ACER_WMI=m
CONFIG_ASUS_LAPTOP=m
CONFIG_FUJITSU_LAPTOP=m
# CONFIG_FUJITSU_LAPTOP_DEBUG is not set
CONFIG_HP_WMI=m
# CONFIG_ICS932S401 is not set
CONFIG_MSI_LAPTOP=m
# CONFIG_PANASONIC_LAPTOP is not set
CONFIG_COMPAL_LAPTOP=m
CONFIG_SONY_LAPTOP=m
CONFIG_SONYPI_COMPAT=y
CONFIG_THINKPAD_ACPI=m
# CONFIG_THINKPAD_ACPI_DEBUG is not set
CONFIG_THINKPAD_ACPI_BAY=y
CONFIG_THINKPAD_ACPI_VIDEO=y
CONFIG_THINKPAD_ACPI_HOTKEY_POLL=y
CONFIG_INTEL_MENLOW=m
CONFIG_EEEPC_LAPTOP=m
CONFIG_ENCLOSURE_SERVICES=m
CONFIG_SGI_XP=m
CONFIG_HP_ILO=m
CONFIG_SGI_GRU=m
# CONFIG_SGI_GRU_DEBUG is not set
# CONFIG_C2PORT is not set
CONFIG_HAVE_IDE=y
# CONFIG_IDE is not set
#
# SCSI device support
#
CONFIG_RAID_ATTRS=m
CONFIG_SCSI=m
CONFIG_SCSI_DMA=y
CONFIG_SCSI_TGT=m
CONFIG_SCSI_NETLINK=y
CONFIG_SCSI_PROC_FS=y
#
# SCSI support type (disk, tape, CD-ROM)
#
CONFIG_BLK_DEV_SD=m
CONFIG_CHR_DEV_ST=m
CONFIG_CHR_DEV_OSST=m
CONFIG_BLK_DEV_SR=m
# CONFIG_BLK_DEV_SR_VENDOR is not set
CONFIG_CHR_DEV_SG=m
CONFIG_CHR_DEV_SCH=m
CONFIG_SCSI_ENCLOSURE=m
#
# Some SCSI devices (e.g. CD jukebox) support multiple LUNs
#
CONFIG_SCSI_MULTI_LUN=y
CONFIG_SCSI_CONSTANTS=y
CONFIG_SCSI_LOGGING=y
CONFIG_SCSI_SCAN_ASYNC=y
CONFIG_SCSI_WAIT_SCAN=m
#
# SCSI Transports
#
CONFIG_SCSI_SPI_ATTRS=m
CONFIG_SCSI_FC_ATTRS=m
CONFIG_SCSI_FC_TGT_ATTRS=y
CONFIG_SCSI_ISCSI_ATTRS=m
CONFIG_SCSI_SAS_ATTRS=m
CONFIG_SCSI_SAS_LIBSAS=m
CONFIG_SCSI_SAS_ATA=y
CONFIG_SCSI_SAS_HOST_SMP=y
# CONFIG_SCSI_SAS_LIBSAS_DEBUG is not set
CONFIG_SCSI_SRP_ATTRS=m
CONFIG_SCSI_SRP_TGT_ATTRS=y
CONFIG_SCSI_LOWLEVEL=y
CONFIG_ISCSI_TCP=m
CONFIG_BLK_DEV_3W_XXXX_RAID=m
CONFIG_SCSI_3W_9XXX=m
CONFIG_SCSI_ACARD=m
CONFIG_SCSI_AACRAID=m
CONFIG_SCSI_AIC7XXX=m
CONFIG_AIC7XXX_CMDS_PER_DEVICE=8
CONFIG_AIC7XXX_RESET_DELAY_MS=15000
CONFIG_AIC7XXX_DEBUG_ENABLE=y
CONFIG_AIC7XXX_DEBUG_MASK=0
CONFIG_AIC7XXX_REG_PRETTY_PRINT=y
# CONFIG_SCSI_AIC7XXX_OLD is not set
CONFIG_SCSI_AIC79XX=m
CONFIG_AIC79XX_CMDS_PER_DEVICE=32
CONFIG_AIC79XX_RESET_DELAY_MS=15000
CONFIG_AIC79XX_DEBUG_ENABLE=y
CONFIG_AIC79XX_DEBUG_MASK=0
CONFIG_AIC79XX_REG_PRETTY_PRINT=y
CONFIG_SCSI_AIC94XX=m
# CONFIG_AIC94XX_DEBUG is not set
CONFIG_SCSI_DPT_I2O=m
CONFIG_SCSI_ADVANSYS=m
CONFIG_SCSI_ARCMSR=m
CONFIG_SCSI_ARCMSR_AER=y
CONFIG_MEGARAID_NEWGEN=y
CONFIG_MEGARAID_MM=m
CONFIG_MEGARAID_MAILBOX=m
CONFIG_MEGARAID_LEGACY=m
CONFIG_MEGARAID_SAS=m
CONFIG_SCSI_HPTIOP=m
CONFIG_SCSI_BUSLOGIC=m
CONFIG_SCSI_DMX3191D=m
CONFIG_SCSI_EATA=m
CONFIG_SCSI_EATA_TAGGED_QUEUE=y
CONFIG_SCSI_EATA_LINKED_COMMANDS=y
CONFIG_SCSI_EATA_MAX_TAGS=16
CONFIG_SCSI_FUTURE_DOMAIN=m
CONFIG_SCSI_GDTH=m
CONFIG_SCSI_IPS=m
CONFIG_SCSI_INITIO=m
CONFIG_SCSI_INIA100=m
CONFIG_SCSI_PPA=m
CONFIG_SCSI_IMM=m
# CONFIG_SCSI_IZIP_EPP16 is not set
# CONFIG_SCSI_IZIP_SLOW_CTR is not set
# CONFIG_SCSI_MVSAS is not set
CONFIG_SCSI_STEX=m
CONFIG_SCSI_SYM53C8XX_2=m
CONFIG_SCSI_SYM53C8XX_DMA_ADDRESSING_MODE=1
CONFIG_SCSI_SYM53C8XX_DEFAULT_TAGS=16
CONFIG_SCSI_SYM53C8XX_MAX_TAGS=64
CONFIG_SCSI_SYM53C8XX_MMIO=y
CONFIG_SCSI_IPR=m
# CONFIG_SCSI_IPR_TRACE is not set
# CONFIG_SCSI_IPR_DUMP is not set
CONFIG_SCSI_QLOGIC_1280=m
CONFIG_SCSI_QLA_FC=m
CONFIG_SCSI_QLA_ISCSI=m
CONFIG_SCSI_LPFC=m
CONFIG_SCSI_DC395x=m
CONFIG_SCSI_DC390T=m
CONFIG_SCSI_DEBUG=m
CONFIG_SCSI_SRP=m
CONFIG_SCSI_LOWLEVEL_PCMCIA=y
CONFIG_PCMCIA_FDOMAIN=m
CONFIG_PCMCIA_QLOGIC=m
CONFIG_PCMCIA_SYM53C500=m
CONFIG_SCSI_DH=m
CONFIG_SCSI_DH_RDAC=m
CONFIG_SCSI_DH_HP_SW=m
CONFIG_SCSI_DH_EMC=m
CONFIG_SCSI_DH_ALUA=m
CONFIG_ATA=m
# CONFIG_ATA_NONSTANDARD is not set
CONFIG_ATA_ACPI=y
CONFIG_SATA_PMP=y
CONFIG_SATA_AHCI=m
CONFIG_SATA_SIL24=m
CONFIG_ATA_SFF=y
CONFIG_SATA_SVW=m
CONFIG_ATA_PIIX=m
CONFIG_SATA_MV=m
CONFIG_SATA_NV=m
CONFIG_PDC_ADMA=m
CONFIG_SATA_QSTOR=m
CONFIG_SATA_PROMISE=m
CONFIG_SATA_SX4=m
CONFIG_SATA_SIL=m
CONFIG_SATA_SIS=m
CONFIG_SATA_ULI=m
CONFIG_SATA_VIA=m
CONFIG_SATA_VITESSE=m
CONFIG_SATA_INIC162X=m
CONFIG_PATA_ACPI=m
CONFIG_PATA_ALI=m
CONFIG_PATA_AMD=m
CONFIG_PATA_ARTOP=m
CONFIG_PATA_ATIIXP=m
# CONFIG_PATA_CMD640_PCI is not set
CONFIG_PATA_CMD64X=m
CONFIG_PATA_CS5520=m
CONFIG_PATA_CS5530=m
# CONFIG_PATA_CYPRESS is not set
CONFIG_PATA_EFAR=m
CONFIG_ATA_GENERIC=m
CONFIG_PATA_HPT366=m
CONFIG_PATA_HPT37X=m
# CONFIG_PATA_HPT3X2N is not set
CONFIG_PATA_HPT3X3=m
# CONFIG_PATA_HPT3X3_DMA is not set
CONFIG_PATA_IT821X=m
CONFIG_PATA_IT8213=m
CONFIG_PATA_JMICRON=m
CONFIG_PATA_TRIFLEX=m
CONFIG_PATA_MARVELL=m
CONFIG_PATA_MPIIX=m
CONFIG_PATA_OLDPIIX=m
CONFIG_PATA_NETCELL=m
CONFIG_PATA_NINJA32=m
CONFIG_PATA_NS87410=m
CONFIG_PATA_NS87415=m
# CONFIG_PATA_OPTI is not set
# CONFIG_PATA_OPTIDMA is not set
CONFIG_PATA_PCMCIA=m
CONFIG_PATA_PDC_OLD=m
# CONFIG_PATA_RADISYS is not set
CONFIG_PATA_RZ1000=m
# CONFIG_PATA_SC1200 is not set
CONFIG_PATA_SERVERWORKS=m
CONFIG_PATA_PDC2027X=m
CONFIG_PATA_SIL680=m
CONFIG_PATA_SIS=m
CONFIG_PATA_VIA=m
CONFIG_PATA_WINBOND=m
CONFIG_PATA_SCH=m
CONFIG_MD=y
CONFIG_BLK_DEV_MD=m
CONFIG_MD_LINEAR=m
CONFIG_MD_RAID0=m
CONFIG_MD_RAID1=m
CONFIG_MD_RAID10=m
CONFIG_MD_RAID456=m
CONFIG_MD_RAID5_RESHAPE=y
CONFIG_MD_MULTIPATH=m
CONFIG_MD_FAULTY=m
CONFIG_BLK_DEV_DM=m
# CONFIG_DM_DEBUG is not set
CONFIG_DM_CRYPT=m
CONFIG_DM_SNAPSHOT=m
CONFIG_DM_MIRROR=m
CONFIG_DM_ZERO=m
CONFIG_DM_MULTIPATH=m
# CONFIG_DM_DELAY is not set
CONFIG_DM_UEVENT=y
CONFIG_FUSION=y
CONFIG_FUSION_SPI=m
CONFIG_FUSION_FC=m
CONFIG_FUSION_SAS=m
CONFIG_FUSION_MAX_SGE=128
CONFIG_FUSION_CTL=m
CONFIG_FUSION_LAN=m
CONFIG_FUSION_LOGGING=y
#
# IEEE 1394 (FireWire) support
#
#
# Enable only one of the two stacks, unless you know what you are doing
#
# CONFIG_FIREWIRE is not set
CONFIG_IEEE1394=m
CONFIG_IEEE1394_OHCI1394=m
CONFIG_IEEE1394_PCILYNX=m
CONFIG_IEEE1394_SBP2=m
# CONFIG_IEEE1394_SBP2_PHYS_DMA is not set
CONFIG_IEEE1394_ETH1394_ROM_ENTRY=y
CONFIG_IEEE1394_ETH1394=m
CONFIG_IEEE1394_RAWIO=m
CONFIG_IEEE1394_VIDEO1394=m
CONFIG_IEEE1394_DV1394=m
# CONFIG_IEEE1394_VERBOSEDEBUG is not set
CONFIG_I2O=m
CONFIG_I2O_LCT_NOTIFY_ON_CHANGES=y
CONFIG_I2O_EXT_ADAPTEC=y
CONFIG_I2O_EXT_ADAPTEC_DMA64=y
CONFIG_I2O_BUS=m
CONFIG_I2O_BLOCK=m
CONFIG_I2O_SCSI=m
CONFIG_I2O_PROC=m
CONFIG_MACINTOSH_DRIVERS=y
CONFIG_MAC_EMUMOUSEBTN=y
CONFIG_NETDEVICES=y
CONFIG_IFB=m
CONFIG_DUMMY=m
CONFIG_BONDING=m
CONFIG_MACVLAN=m
CONFIG_EQUALIZER=m
CONFIG_TUN=m
CONFIG_VETH=m
CONFIG_NET_SB1000=m
CONFIG_ARCNET=m
CONFIG_ARCNET_1201=m
CONFIG_ARCNET_1051=m
CONFIG_ARCNET_RAW=m
CONFIG_ARCNET_CAP=m
CONFIG_ARCNET_COM90xx=m
CONFIG_ARCNET_COM90xxIO=m
CONFIG_ARCNET_RIM_I=m
CONFIG_ARCNET_COM20020=m
CONFIG_ARCNET_COM20020_PCI=m
CONFIG_PHYLIB=m
#
# MII PHY device drivers
#
CONFIG_MARVELL_PHY=m
CONFIG_DAVICOM_PHY=m
CONFIG_QSEMI_PHY=m
CONFIG_LXT_PHY=m
CONFIG_CICADA_PHY=m
CONFIG_VITESSE_PHY=m
CONFIG_SMSC_PHY=m
CONFIG_BROADCOM_PHY=m
CONFIG_ICPLUS_PHY=m
# CONFIG_REALTEK_PHY is not set
CONFIG_MDIO_BITBANG=m
CONFIG_NET_ETHERNET=y
CONFIG_MII=m
CONFIG_HAPPYMEAL=m
CONFIG_SUNGEM=m
CONFIG_CASSINI=m
CONFIG_NET_VENDOR_3COM=y
CONFIG_VORTEX=m
CONFIG_TYPHOON=m
# CONFIG_ENC28J60 is not set
CONFIG_NET_TULIP=y
CONFIG_DE2104X=m
CONFIG_TULIP=m
# CONFIG_TULIP_MWI is not set
# CONFIG_TULIP_MMIO is not set
# CONFIG_TULIP_NAPI is not set
CONFIG_DE4X5=m
CONFIG_WINBOND_840=m
CONFIG_DM9102=m
CONFIG_ULI526X=m
CONFIG_PCMCIA_XIRCOM=m
CONFIG_HP100=m
# CONFIG_IBM_NEW_EMAC_ZMII is not set
# CONFIG_IBM_NEW_EMAC_RGMII is not set
# CONFIG_IBM_NEW_EMAC_TAH is not set
# CONFIG_IBM_NEW_EMAC_EMAC4 is not set
# CONFIG_IBM_NEW_EMAC_NO_FLOW_CTRL is not set
# CONFIG_IBM_NEW_EMAC_MAL_CLR_ICINTSTAT is not set
# CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set
CONFIG_NET_PCI=y
CONFIG_PCNET32=m
CONFIG_AMD8111_ETH=m
CONFIG_ADAPTEC_STARFIRE=m
CONFIG_B44=m
CONFIG_B44_PCI_AUTOSELECT=y
CONFIG_B44_PCICORE_AUTOSELECT=y
CONFIG_B44_PCI=y
CONFIG_FORCEDETH=m
# CONFIG_FORCEDETH_NAPI is not set
CONFIG_EEPRO100=m
CONFIG_E100=m
CONFIG_FEALNX=m
CONFIG_NATSEMI=m
CONFIG_NE2K_PCI=m
CONFIG_8139CP=m
CONFIG_8139TOO=m
CONFIG_8139TOO_PIO=y
# CONFIG_8139TOO_TUNE_TWISTER is not set
CONFIG_8139TOO_8129=y
# CONFIG_8139_OLD_RX_RESET is not set
# CONFIG_R6040 is not set
CONFIG_SIS900=m
CONFIG_EPIC100=m
CONFIG_SUNDANCE=m
# CONFIG_SUNDANCE_MMIO is not set
CONFIG_TLAN=m
CONFIG_VIA_RHINE=m
CONFIG_VIA_RHINE_MMIO=y
CONFIG_SC92031=m
CONFIG_NET_POCKET=y
CONFIG_ATP=m
CONFIG_DE600=m
CONFIG_DE620=m
CONFIG_ATL2=m
CONFIG_NETDEV_1000=y
CONFIG_ACENIC=m
# CONFIG_ACENIC_OMIT_TIGON_I is not set
# CONFIG_DL2K is not set
CONFIG_E1000=m
CONFIG_E1000E=m
CONFIG_IP1000=m
CONFIG_IGB=m
# CONFIG_IGB_LRO is not set
CONFIG_IGB_DCA=y
CONFIG_NS83820=m
CONFIG_HAMACHI=m
CONFIG_YELLOWFIN=m
CONFIG_R8169=m
CONFIG_R8169_VLAN=y
CONFIG_SIS190=m
CONFIG_SKGE=m
# CONFIG_SKGE_DEBUG is not set
CONFIG_SKY2=m
# CONFIG_SKY2_DEBUG is not set
CONFIG_VIA_VELOCITY=m
CONFIG_TIGON3=m
CONFIG_BNX2=m
CONFIG_QLA3XXX=m
CONFIG_ATL1=m
CONFIG_ATL1E=m
# CONFIG_JME is not set
CONFIG_NETDEV_10000=y
CONFIG_CHELSIO_T1=m
CONFIG_CHELSIO_T1_1G=y
CONFIG_CHELSIO_T3=m
# CONFIG_ENIC is not set
CONFIG_IXGBE=m
CONFIG_IXGBE_DCA=y
CONFIG_IXGB=m
CONFIG_S2IO=m
CONFIG_MYRI10GE=m
CONFIG_MYRI10GE_DCA=y
CONFIG_NETXEN_NIC=m
CONFIG_NIU=m
# CONFIG_MLX4_EN is not set
CONFIG_MLX4_CORE=m
CONFIG_MLX4_DEBUG=y
CONFIG_TEHUTI=m
CONFIG_BNX2X=m
# CONFIG_QLGE is not set
CONFIG_SFC=m
CONFIG_TR=y
CONFIG_IBMOL=m
CONFIG_3C359=m
CONFIG_TMS380TR=m
CONFIG_TMSPCI=m
CONFIG_ABYSS=m
#
# Wireless LAN
#
CONFIG_WLAN_PRE80211=y
CONFIG_STRIP=m
CONFIG_PCMCIA_WAVELAN=m
CONFIG_PCMCIA_NETWAVE=m
CONFIG_WLAN_80211=y
CONFIG_PCMCIA_RAYCS=m
CONFIG_IPW2100=m
CONFIG_IPW2100_MONITOR=y
# CONFIG_IPW2100_DEBUG is not set
CONFIG_IPW2200=m
CONFIG_IPW2200_MONITOR=y
CONFIG_IPW2200_RADIOTAP=y
CONFIG_IPW2200_PROMISCUOUS=y
CONFIG_IPW2200_QOS=y
# CONFIG_IPW2200_DEBUG is not set
CONFIG_LIBERTAS=m
CONFIG_LIBERTAS_USB=m
CONFIG_LIBERTAS_CS=m
CONFIG_LIBERTAS_SDIO=m
# CONFIG_LIBERTAS_DEBUG is not set
# CONFIG_LIBERTAS_THINFIRM is not set
CONFIG_AIRO=m
CONFIG_HERMES=m
CONFIG_PLX_HERMES=m
CONFIG_TMD_HERMES=m
CONFIG_NORTEL_HERMES=m
CONFIG_PCI_HERMES=m
CONFIG_PCMCIA_HERMES=m
CONFIG_PCMCIA_SPECTRUM=m
CONFIG_ATMEL=m
CONFIG_PCI_ATMEL=m
CONFIG_PCMCIA_ATMEL=m
CONFIG_AIRO_CS=m
CONFIG_PCMCIA_WL3501=m
CONFIG_PRISM54=m
CONFIG_USB_ZD1201=m
CONFIG_USB_NET_RNDIS_WLAN=m
CONFIG_RTL8180=m
CONFIG_RTL8187=m
CONFIG_ADM8211=m
# CONFIG_MAC80211_HWSIM is not set
CONFIG_P54_COMMON=m
CONFIG_P54_USB=m
CONFIG_P54_PCI=m
# CONFIG_ATH5K is not set
CONFIG_ATH9K=m
CONFIG_IWLWIFI=m
CONFIG_IWLCORE=m
CONFIG_IWLWIFI_LEDS=y
CONFIG_IWLWIFI_RFKILL=y
# CONFIG_IWLWIFI_DEBUG is not set
CONFIG_IWLAGN=m
CONFIG_IWLAGN_SPECTRUM_MEASUREMENT=y
CONFIG_IWLAGN_LEDS=y
CONFIG_IWL4965=y
CONFIG_IWL5000=y
CONFIG_IWL3945=m
CONFIG_IWL3945_RFKILL=y
CONFIG_IWL3945_SPECTRUM_MEASUREMENT=y
CONFIG_IWL3945_LEDS=y
# CONFIG_IWL3945_DEBUG is not set
CONFIG_HOSTAP=m
CONFIG_HOSTAP_FIRMWARE=y
CONFIG_HOSTAP_FIRMWARE_NVRAM=y
CONFIG_HOSTAP_PLX=m
CONFIG_HOSTAP_PCI=m
CONFIG_HOSTAP_CS=m
CONFIG_B43=m
CONFIG_B43_PCI_AUTOSELECT=y
CONFIG_B43_PCICORE_AUTOSELECT=y
# CONFIG_B43_PCMCIA is not set
CONFIG_B43_LEDS=y
CONFIG_B43_RFKILL=y
# CONFIG_B43_DEBUG is not set
CONFIG_B43LEGACY=m
CONFIG_B43LEGACY_PCI_AUTOSELECT=y
CONFIG_B43LEGACY_PCICORE_AUTOSELECT=y
CONFIG_B43LEGACY_LEDS=y
CONFIG_B43LEGACY_RFKILL=y
CONFIG_B43LEGACY_DEBUG=y
CONFIG_B43LEGACY_DMA=y
CONFIG_B43LEGACY_PIO=y
CONFIG_B43LEGACY_DMA_AND_PIO_MODE=y
# CONFIG_B43LEGACY_DMA_MODE is not set
# CONFIG_B43LEGACY_PIO_MODE is not set
CONFIG_ZD1211RW=m
# CONFIG_ZD1211RW_DEBUG is not set
#
# USB Network Adapters
#
CONFIG_USB_CATC=m
CONFIG_USB_KAWETH=m
CONFIG_USB_PEGASUS=m
CONFIG_USB_RTL8150=m
CONFIG_USB_USBNET=m
CONFIG_USB_NET_AX8817X=m
CONFIG_USB_NET_CDCETHER=m
CONFIG_USB_NET_DM9601=m
# CONFIG_USB_NET_SMSC95XX is not set
CONFIG_USB_NET_GL620A=m
CONFIG_USB_NET_NET1080=m
CONFIG_USB_NET_PLUSB=m
CONFIG_USB_NET_MCS7830=m
CONFIG_USB_NET_RNDIS_HOST=m
CONFIG_USB_NET_CDC_SUBSET=m
CONFIG_USB_ALI_M5632=y
CONFIG_USB_AN2720=y
CONFIG_USB_BELKIN=y
CONFIG_USB_ARMLINUX=y
CONFIG_USB_EPSON2888=y
CONFIG_USB_KC2190=y
CONFIG_USB_NET_ZAURUS=m
CONFIG_USB_HSO=m
CONFIG_NET_PCMCIA=y
CONFIG_PCMCIA_3C589=m
CONFIG_PCMCIA_3C574=m
CONFIG_PCMCIA_FMVJ18X=m
CONFIG_PCMCIA_PCNET=m
CONFIG_PCMCIA_NMCLAN=m
CONFIG_PCMCIA_SMC91C92=m
CONFIG_PCMCIA_XIRC2PS=m
CONFIG_PCMCIA_AXNET=m
CONFIG_ARCNET_COM20020_CS=m
# CONFIG_PCMCIA_IBMTR is not set
CONFIG_WAN=y
CONFIG_LANMEDIA=m
CONFIG_HDLC=m
CONFIG_HDLC_RAW=m
CONFIG_HDLC_RAW_ETH=m
CONFIG_HDLC_CISCO=m
CONFIG_HDLC_FR=m
CONFIG_HDLC_PPP=m
CONFIG_HDLC_X25=m
CONFIG_PCI200SYN=m
CONFIG_WANXL=m
# CONFIG_PC300TOO is not set
CONFIG_FARSYNC=m
CONFIG_DSCC4=m
CONFIG_DSCC4_PCISYNC=y
CONFIG_DSCC4_PCI_RST=y
CONFIG_DLCI=m
CONFIG_DLCI_MAX=8
CONFIG_WAN_ROUTER_DRIVERS=m
CONFIG_CYCLADES_SYNC=m
CONFIG_CYCLOMX_X25=y
CONFIG_LAPBETHER=m
CONFIG_X25_ASY=m
CONFIG_SBNI=m
# CONFIG_SBNI_MULTILINE is not set
CONFIG_ATM_DRIVERS=y
# CONFIG_ATM_DUMMY is not set
CONFIG_ATM_TCP=m
CONFIG_ATM_LANAI=m
CONFIG_ATM_ENI=m
# CONFIG_ATM_ENI_DEBUG is not set
# CONFIG_ATM_ENI_TUNE_BURST is not set
CONFIG_ATM_FIRESTREAM=m
CONFIG_ATM_ZATM=m
# CONFIG_ATM_ZATM_DEBUG is not set
CONFIG_ATM_IDT77252=m
# CONFIG_ATM_IDT77252_DEBUG is not set
# CONFIG_ATM_IDT77252_RCV_ALL is not set
CONFIG_ATM_IDT77252_USE_SUNI=y
CONFIG_ATM_AMBASSADOR=m
# CONFIG_ATM_AMBASSADOR_DEBUG is not set
CONFIG_ATM_HORIZON=m
# CONFIG_ATM_HORIZON_DEBUG is not set
CONFIG_ATM_IA=m
# CONFIG_ATM_IA_DEBUG is not set
CONFIG_ATM_FORE200E=m
# CONFIG_ATM_FORE200E_USE_TASKLET is not set
CONFIG_ATM_FORE200E_TX_RETRY=16
CONFIG_ATM_FORE200E_DEBUG=0
CONFIG_ATM_HE=m
CONFIG_ATM_HE_USE_SUNI=y
CONFIG_XEN_NETDEV_FRONTEND=m
CONFIG_FDDI=y
CONFIG_DEFXX=m
# CONFIG_DEFXX_MMIO is not set
CONFIG_SKFP=m
CONFIG_HIPPI=y
CONFIG_ROADRUNNER=m
# CONFIG_ROADRUNNER_LARGE_RINGS is not set
CONFIG_PLIP=m
CONFIG_PPP=m
CONFIG_PPP_MULTILINK=y
CONFIG_PPP_FILTER=y
CONFIG_PPP_ASYNC=m
CONFIG_PPP_SYNC_TTY=m
CONFIG_PPP_DEFLATE=m
CONFIG_PPP_BSDCOMP=m
CONFIG_PPP_MPPE=m
CONFIG_PPPOE=m
CONFIG_PPPOATM=m
CONFIG_PPPOL2TP=m
CONFIG_SLIP=m
CONFIG_SLIP_COMPRESSED=y
CONFIG_SLHC=m
CONFIG_SLIP_SMART=y
CONFIG_SLIP_MODE_SLIP6=y
CONFIG_NET_FC=y
CONFIG_NETCONSOLE=m
CONFIG_NETCONSOLE_DYNAMIC=y
CONFIG_NETPOLL=y
# CONFIG_NETPOLL_TRAP is not set
CONFIG_NET_POLL_CONTROLLER=y
CONFIG_VIRTIO_NET=m
CONFIG_ISDN=y
CONFIG_ISDN_I4L=m
CONFIG_ISDN_PPP=y
CONFIG_ISDN_PPP_VJ=y
CONFIG_ISDN_MPP=y
CONFIG_IPPP_FILTER=y
CONFIG_ISDN_PPP_BSDCOMP=m
CONFIG_ISDN_AUDIO=y
CONFIG_ISDN_TTY_FAX=y
CONFIG_ISDN_X25=y
#
# ISDN feature submodules
#
CONFIG_ISDN_DIVERSION=m
#
# ISDN4Linux hardware drivers
#
#
# Passive cards
#
CONFIG_ISDN_DRV_HISAX=m
#
# D-channel protocol features
#
CONFIG_HISAX_EURO=y
CONFIG_DE_AOC=y
# CONFIG_HISAX_NO_SENDCOMPLETE is not set
# CONFIG_HISAX_NO_LLC is not set
# CONFIG_HISAX_NO_KEYPAD is not set
CONFIG_HISAX_1TR6=y
CONFIG_HISAX_NI1=y
CONFIG_HISAX_MAX_CARDS=8
#
# HiSax supported cards
#
CONFIG_HISAX_16_3=y
CONFIG_HISAX_TELESPCI=y
CONFIG_HISAX_S0BOX=y
CONFIG_HISAX_FRITZPCI=y
CONFIG_HISAX_AVM_A1_PCMCIA=y
CONFIG_HISAX_ELSA=y
CONFIG_HISAX_DIEHLDIVA=y
CONFIG_HISAX_SEDLBAUER=y
CONFIG_HISAX_NETJET=y
CONFIG_HISAX_NETJET_U=y
CONFIG_HISAX_NICCY=y
CONFIG_HISAX_BKM_A4T=y
CONFIG_HISAX_SCT_QUADRO=y
CONFIG_HISAX_GAZEL=y
CONFIG_HISAX_HFC_PCI=y
CONFIG_HISAX_W6692=y
CONFIG_HISAX_HFC_SX=y
CONFIG_HISAX_ENTERNOW_PCI=y
# CONFIG_HISAX_DEBUG is not set
#
# HiSax PCMCIA card service modules
#
CONFIG_HISAX_SEDLBAUER_CS=m
CONFIG_HISAX_ELSA_CS=m
CONFIG_HISAX_AVM_A1_CS=m
CONFIG_HISAX_TELES_CS=m
#
# HiSax sub driver modules
#
CONFIG_HISAX_ST5481=m
CONFIG_HISAX_HFCUSB=m
CONFIG_HISAX_HFC4S8S=m
CONFIG_HISAX_FRITZ_PCIPNP=m
CONFIG_HISAX_HDLC=y
#
# Active cards
#
CONFIG_HYSDN=m
CONFIG_HYSDN_CAPI=y
CONFIG_ISDN_DRV_GIGASET=m
CONFIG_GIGASET_BASE=m
CONFIG_GIGASET_M105=m
CONFIG_GIGASET_M101=m
# CONFIG_GIGASET_DEBUG is not set
# CONFIG_GIGASET_UNDOCREQ is not set
CONFIG_ISDN_CAPI=m
CONFIG_ISDN_DRV_AVMB1_VERBOSE_REASON=y
CONFIG_CAPI_TRACE=y
CONFIG_ISDN_CAPI_MIDDLEWARE=y
CONFIG_ISDN_CAPI_CAPI20=m
CONFIG_ISDN_CAPI_CAPIFS_BOOL=y
CONFIG_ISDN_CAPI_CAPIFS=m
CONFIG_ISDN_CAPI_CAPIDRV=m
#
# CAPI hardware drivers
#
CONFIG_CAPI_AVM=y
CONFIG_ISDN_DRV_AVMB1_B1PCI=m
CONFIG_ISDN_DRV_AVMB1_B1PCIV4=y
CONFIG_ISDN_DRV_AVMB1_B1PCMCIA=m
CONFIG_ISDN_DRV_AVMB1_AVM_CS=m
CONFIG_ISDN_DRV_AVMB1_T1PCI=m
CONFIG_ISDN_DRV_AVMB1_C4=m
CONFIG_CAPI_EICON=y
CONFIG_ISDN_DIVAS=m
CONFIG_ISDN_DIVAS_BRIPCI=y
CONFIG_ISDN_DIVAS_PRIPCI=y
CONFIG_ISDN_DIVAS_DIVACAPI=m
CONFIG_ISDN_DIVAS_USERIDI=m
CONFIG_ISDN_DIVAS_MAINT=m
CONFIG_PHONE=m
#
# Input device support
#
CONFIG_INPUT=y
CONFIG_INPUT_FF_MEMLESS=m
CONFIG_INPUT_POLLDEV=m
#
# Userland interfaces
#
CONFIG_INPUT_MOUSEDEV=y
CONFIG_INPUT_MOUSEDEV_PSAUX=y
CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024
CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
CONFIG_INPUT_JOYDEV=m
CONFIG_INPUT_EVDEV=m
CONFIG_INPUT_EVBUG=m
CONFIG_XEN_KBDDEV_FRONTEND=m
#
# Input Device Drivers
#
CONFIG_INPUT_KEYBOARD=y
CONFIG_KEYBOARD_ATKBD=y
CONFIG_KEYBOARD_SUNKBD=m
CONFIG_KEYBOARD_LKKBD=m
CONFIG_KEYBOARD_XTKBD=m
CONFIG_KEYBOARD_NEWTON=m
CONFIG_KEYBOARD_STOWAWAY=m
CONFIG_KEYBOARD_GPIO=m
CONFIG_INPUT_MOUSE=y
CONFIG_MOUSE_PS2=m
CONFIG_MOUSE_PS2_ALPS=y
CONFIG_MOUSE_PS2_LOGIPS2PP=y
CONFIG_MOUSE_PS2_SYNAPTICS=y
CONFIG_MOUSE_PS2_LIFEBOOK=y
CONFIG_MOUSE_PS2_TRACKPOINT=y
# CONFIG_MOUSE_PS2_ELANTECH is not set
# CONFIG_MOUSE_PS2_TOUCHKIT is not set
CONFIG_MOUSE_SERIAL=m
CONFIG_MOUSE_APPLETOUCH=m
CONFIG_MOUSE_BCM5974=m
CONFIG_MOUSE_VSXXXAA=m
CONFIG_MOUSE_GPIO=m
CONFIG_INPUT_JOYSTICK=y
CONFIG_JOYSTICK_ANALOG=m
CONFIG_JOYSTICK_A3D=m
CONFIG_JOYSTICK_ADI=m
CONFIG_JOYSTICK_COBRA=m
CONFIG_JOYSTICK_GF2K=m
CONFIG_JOYSTICK_GRIP=m
CONFIG_JOYSTICK_GRIP_MP=m
CONFIG_JOYSTICK_GUILLEMOT=m
CONFIG_JOYSTICK_INTERACT=m
CONFIG_JOYSTICK_SIDEWINDER=m
CONFIG_JOYSTICK_TMDC=m
CONFIG_JOYSTICK_IFORCE=m
CONFIG_JOYSTICK_IFORCE_USB=y
CONFIG_JOYSTICK_IFORCE_232=y
CONFIG_JOYSTICK_WARRIOR=m
CONFIG_JOYSTICK_MAGELLAN=m
CONFIG_JOYSTICK_SPACEORB=m
CONFIG_JOYSTICK_SPACEBALL=m
CONFIG_JOYSTICK_STINGER=m
CONFIG_JOYSTICK_TWIDJOY=m
CONFIG_JOYSTICK_ZHENHUA=m
CONFIG_JOYSTICK_DB9=m
CONFIG_JOYSTICK_GAMECON=m
CONFIG_JOYSTICK_TURBOGRAFX=m
CONFIG_JOYSTICK_JOYDUMP=m
CONFIG_JOYSTICK_XPAD=m
CONFIG_JOYSTICK_XPAD_FF=y
CONFIG_JOYSTICK_XPAD_LEDS=y
CONFIG_INPUT_TABLET=y
CONFIG_TABLET_USB_ACECAD=m
CONFIG_TABLET_USB_AIPTEK=m
CONFIG_TABLET_USB_GTCO=m
CONFIG_TABLET_USB_KBTAB=m
CONFIG_TABLET_USB_WACOM=m
CONFIG_INPUT_TOUCHSCREEN=y
CONFIG_TOUCHSCREEN_ADS7846=m
CONFIG_TOUCHSCREEN_FUJITSU=m
CONFIG_TOUCHSCREEN_GUNZE=m
CONFIG_TOUCHSCREEN_ELO=m
CONFIG_TOUCHSCREEN_MTOUCH=m
CONFIG_TOUCHSCREEN_INEXIO=m
CONFIG_TOUCHSCREEN_MK712=m
CONFIG_TOUCHSCREEN_PENMOUNT=m
CONFIG_TOUCHSCREEN_TOUCHRIGHT=m
CONFIG_TOUCHSCREEN_TOUCHWIN=m
CONFIG_TOUCHSCREEN_WM97XX=m
CONFIG_TOUCHSCREEN_WM9705=y
CONFIG_TOUCHSCREEN_WM9712=y
CONFIG_TOUCHSCREEN_WM9713=y
CONFIG_TOUCHSCREEN_USB_COMPOSITE=m
CONFIG_TOUCHSCREEN_USB_EGALAX=y
CONFIG_TOUCHSCREEN_USB_PANJIT=y
CONFIG_TOUCHSCREEN_USB_3M=y
CONFIG_TOUCHSCREEN_USB_ITM=y
CONFIG_TOUCHSCREEN_USB_ETURBO=y
CONFIG_TOUCHSCREEN_USB_GUNZE=y
CONFIG_TOUCHSCREEN_USB_DMC_TSC10=y
CONFIG_TOUCHSCREEN_USB_IRTOUCH=y
CONFIG_TOUCHSCREEN_USB_IDEALTEK=y
CONFIG_TOUCHSCREEN_USB_GENERAL_TOUCH=y
CONFIG_TOUCHSCREEN_USB_GOTOP=y
CONFIG_TOUCHSCREEN_TOUCHIT213=m
CONFIG_INPUT_MISC=y
CONFIG_INPUT_PCSPKR=m
# CONFIG_INPUT_APANEL is not set
CONFIG_INPUT_ATLAS_BTNS=m
CONFIG_INPUT_ATI_REMOTE=m
CONFIG_INPUT_ATI_REMOTE2=m
CONFIG_INPUT_KEYSPAN_REMOTE=m
CONFIG_INPUT_POWERMATE=m
CONFIG_INPUT_YEALINK=m
# CONFIG_INPUT_CM109 is not set
CONFIG_INPUT_UINPUT=m
#
# Hardware I/O ports
#
CONFIG_SERIO=y
CONFIG_SERIO_I8042=y
CONFIG_SERIO_SERPORT=m
CONFIG_SERIO_CT82C710=m
CONFIG_SERIO_PARKBD=m
CONFIG_SERIO_PCIPS2=m
CONFIG_SERIO_LIBPS2=y
CONFIG_SERIO_RAW=m
CONFIG_GAMEPORT=m
CONFIG_GAMEPORT_NS558=m
CONFIG_GAMEPORT_L4=m
CONFIG_GAMEPORT_EMU10K1=m
CONFIG_GAMEPORT_FM801=m
#
# Character devices
#
CONFIG_VT=y
CONFIG_CONSOLE_TRANSLATIONS=y
CONFIG_VT_CONSOLE=y
CONFIG_HW_CONSOLE=y
CONFIG_VT_HW_CONSOLE_BINDING=y
CONFIG_DEVKMEM=y
CONFIG_SERIAL_NONSTANDARD=y
CONFIG_COMPUTONE=m
CONFIG_ROCKETPORT=m
CONFIG_CYCLADES=m
# CONFIG_CYZ_INTR is not set
CONFIG_DIGIEPCA=m
CONFIG_MOXA_INTELLIO=m
CONFIG_MOXA_SMARTIO=m
# CONFIG_ISI is not set
CONFIG_SYNCLINK=m
CONFIG_SYNCLINKMP=m
CONFIG_SYNCLINK_GT=m
CONFIG_N_HDLC=m
CONFIG_RISCOM8=m
CONFIG_SPECIALIX=m
CONFIG_SX=m
CONFIG_RIO=m
# CONFIG_RIO_OLDPCI is not set
CONFIG_STALDRV=y
# CONFIG_STALLION is not set
# CONFIG_ISTALLION is not set
CONFIG_NOZOMI=m
#
# Serial drivers
#
CONFIG_SERIAL_8250=y
CONFIG_SERIAL_8250_CONSOLE=y
CONFIG_FIX_EARLYCON_MEM=y
CONFIG_SERIAL_8250_PCI=y
CONFIG_SERIAL_8250_PNP=y
CONFIG_SERIAL_8250_CS=m
CONFIG_SERIAL_8250_NR_UARTS=48
CONFIG_SERIAL_8250_RUNTIME_UARTS=4
CONFIG_SERIAL_8250_EXTENDED=y
CONFIG_SERIAL_8250_MANY_PORTS=y
CONFIG_SERIAL_8250_SHARE_IRQ=y
# CONFIG_SERIAL_8250_DETECT_IRQ is not set
CONFIG_SERIAL_8250_RSA=y
#
# Non-8250 serial port support
#
CONFIG_SERIAL_CORE=y
CONFIG_SERIAL_CORE_CONSOLE=y
CONFIG_CONSOLE_POLL=y
CONFIG_SERIAL_JSM=m
CONFIG_UNIX98_PTYS=y
CONFIG_LEGACY_PTYS=y
CONFIG_LEGACY_PTY_COUNT=256
CONFIG_PRINTER=m
# CONFIG_LP_CONSOLE is not set
CONFIG_PPDEV=m
CONFIG_HVC_DRIVER=y
CONFIG_HVC_IRQ=y
CONFIG_HVC_XEN=y
CONFIG_VIRTIO_CONSOLE=m
CONFIG_IPMI_HANDLER=m
# CONFIG_IPMI_PANIC_EVENT is not set
CONFIG_IPMI_DEVICE_INTERFACE=m
CONFIG_IPMI_SI=m
CONFIG_IPMI_WATCHDOG=m
CONFIG_IPMI_POWEROFF=m
CONFIG_HW_RANDOM=y
CONFIG_HW_RANDOM_INTEL=m
CONFIG_HW_RANDOM_AMD=m
CONFIG_HW_RANDOM_VIRTIO=m
CONFIG_NVRAM=m
CONFIG_R3964=m
CONFIG_APPLICOM=m
#
# PCMCIA character devices
#
CONFIG_SYNCLINK_CS=m
CONFIG_CARDMAN_4000=m
CONFIG_CARDMAN_4040=m
CONFIG_IPWIRELESS=m
CONFIG_MWAVE=m
CONFIG_PC8736x_GPIO=m
CONFIG_NSC_GPIO=m
CONFIG_RAW_DRIVER=m
CONFIG_MAX_RAW_DEVS=256
CONFIG_HPET=y
CONFIG_HPET_MMAP=y
CONFIG_HANGCHECK_TIMER=m
CONFIG_TCG_TPM=m
CONFIG_TCG_TIS=m
CONFIG_TCG_NSC=m
CONFIG_TCG_ATMEL=m
CONFIG_TCG_INFINEON=m
CONFIG_TELCLOCK=m
CONFIG_DEVPORT=y
CONFIG_I2C=m
CONFIG_I2C_BOARDINFO=y
CONFIG_I2C_CHARDEV=m
# CONFIG_I2C_HELPER_AUTO is not set
#
# I2C Algorithms
#
CONFIG_I2C_ALGOBIT=m
CONFIG_I2C_ALGOPCF=m
CONFIG_I2C_ALGOPCA=m
#
# I2C Hardware Bus support
#
#
# PC SMBus host controller drivers
#
CONFIG_I2C_ALI1535=m
CONFIG_I2C_ALI1563=m
CONFIG_I2C_ALI15X3=m
CONFIG_I2C_AMD756=m
CONFIG_I2C_AMD8111=m
CONFIG_I2C_I801=m
CONFIG_I2C_ISCH=m
CONFIG_I2C_PIIX4=m
CONFIG_I2C_NFORCE2=m
CONFIG_I2C_SIS5595=m
CONFIG_I2C_SIS630=m
CONFIG_I2C_SIS96X=m
CONFIG_I2C_VIA=m
CONFIG_I2C_VIAPRO=m
#
# I2C system bus drivers (mostly embedded / system-on-chip)
#
CONFIG_I2C_GPIO=m
CONFIG_I2C_OCORES=m
CONFIG_I2C_SIMTEC=m
#
# External I2C/SMBus adapter drivers
#
CONFIG_I2C_PARPORT=m
CONFIG_I2C_PARPORT_LIGHT=m
CONFIG_I2C_TAOS_EVM=m
CONFIG_I2C_TINY_USB=m
#
# Graphics adapter I2C/DDC channel drivers
#
CONFIG_I2C_VOODOO3=m
#
# Other I2C/SMBus bus drivers
#
CONFIG_I2C_PCA_PLATFORM=m
CONFIG_I2C_STUB=m
#
# Miscellaneous I2C Chip support
#
CONFIG_DS1682=m
CONFIG_AT24=m
CONFIG_SENSORS_EEPROM=m
CONFIG_SENSORS_PCF8591=m
CONFIG_TPS65010=m
CONFIG_SENSORS_MAX6875=m
CONFIG_SENSORS_TSL2550=m
# CONFIG_I2C_DEBUG_CORE is not set
# CONFIG_I2C_DEBUG_ALGO is not set
# CONFIG_I2C_DEBUG_BUS is not set
# CONFIG_I2C_DEBUG_CHIP is not set
CONFIG_SPI=y
# CONFIG_SPI_DEBUG is not set
CONFIG_SPI_MASTER=y
#
# SPI Master Controller Drivers
#
CONFIG_SPI_BITBANG=m
CONFIG_SPI_BUTTERFLY=m
CONFIG_SPI_LM70_LLP=m
#
# SPI Protocol Masters
#
CONFIG_SPI_AT25=m
CONFIG_SPI_SPIDEV=m
CONFIG_SPI_TLE62X0=m
CONFIG_ARCH_WANT_OPTIONAL_GPIOLIB=y
CONFIG_GPIOLIB=y
# CONFIG_DEBUG_GPIO is not set
CONFIG_GPIO_SYSFS=y
#
# Memory mapped GPIO expanders:
#
#
# I2C GPIO expanders:
#
CONFIG_GPIO_MAX732X=m
CONFIG_GPIO_PCA953X=m
CONFIG_GPIO_PCF857X=m
#
# PCI GPIO expanders:
#
#
# SPI GPIO expanders:
#
CONFIG_GPIO_MAX7301=m
CONFIG_GPIO_MCP23S08=m
CONFIG_W1=m
CONFIG_W1_CON=y
#
# 1-wire Bus Masters
#
CONFIG_W1_MASTER_MATROX=m
CONFIG_W1_MASTER_DS2490=m
CONFIG_W1_MASTER_DS2482=m
CONFIG_W1_MASTER_GPIO=m
#
# 1-wire Slaves
#
CONFIG_W1_SLAVE_THERM=m
CONFIG_W1_SLAVE_SMEM=m
CONFIG_W1_SLAVE_DS2433=m
# CONFIG_W1_SLAVE_DS2433_CRC is not set
CONFIG_W1_SLAVE_DS2760=m
# CONFIG_W1_SLAVE_BQ27000 is not set
CONFIG_POWER_SUPPLY=y
# CONFIG_POWER_SUPPLY_DEBUG is not set
CONFIG_PDA_POWER=m
CONFIG_BATTERY_DS2760=m
# CONFIG_BATTERY_BQ27x00 is not set
CONFIG_HWMON=y
CONFIG_HWMON_VID=m
CONFIG_SENSORS_ABITUGURU=m
CONFIG_SENSORS_ABITUGURU3=m
CONFIG_SENSORS_AD7414=m
CONFIG_SENSORS_AD7418=m
CONFIG_SENSORS_ADCXX=m
CONFIG_SENSORS_ADM1021=m
CONFIG_SENSORS_ADM1025=m
CONFIG_SENSORS_ADM1026=m
CONFIG_SENSORS_ADM1029=m
CONFIG_SENSORS_ADM1031=m
CONFIG_SENSORS_ADM9240=m
# CONFIG_SENSORS_ADT7462 is not set
CONFIG_SENSORS_ADT7470=m
CONFIG_SENSORS_ADT7473=m
CONFIG_SENSORS_K8TEMP=m
CONFIG_SENSORS_ASB100=m
CONFIG_SENSORS_ATXP1=m
CONFIG_SENSORS_DS1621=m
CONFIG_SENSORS_I5K_AMB=m
CONFIG_SENSORS_F71805F=m
CONFIG_SENSORS_F71882FG=m
CONFIG_SENSORS_F75375S=m
CONFIG_SENSORS_FSCHER=m
CONFIG_SENSORS_FSCPOS=m
CONFIG_SENSORS_FSCHMD=m
CONFIG_SENSORS_GL518SM=m
CONFIG_SENSORS_GL520SM=m
CONFIG_SENSORS_CORETEMP=m
CONFIG_SENSORS_IBMAEM=m
CONFIG_SENSORS_IBMPEX=m
CONFIG_SENSORS_IT87=m
CONFIG_SENSORS_LM63=m
CONFIG_SENSORS_LM70=m
CONFIG_SENSORS_LM75=m
CONFIG_SENSORS_LM77=m
CONFIG_SENSORS_LM78=m
CONFIG_SENSORS_LM80=m
CONFIG_SENSORS_LM83=m
CONFIG_SENSORS_LM85=m
CONFIG_SENSORS_LM87=m
CONFIG_SENSORS_LM90=m
CONFIG_SENSORS_LM92=m
CONFIG_SENSORS_LM93=m
# CONFIG_SENSORS_MAX1111 is not set
CONFIG_SENSORS_MAX1619=m
CONFIG_SENSORS_MAX6650=m
CONFIG_SENSORS_PC87360=m
CONFIG_SENSORS_PC87427=m
CONFIG_SENSORS_SIS5595=m
CONFIG_SENSORS_DME1737=m
CONFIG_SENSORS_SMSC47M1=m
CONFIG_SENSORS_SMSC47M192=m
CONFIG_SENSORS_SMSC47B397=m
CONFIG_SENSORS_ADS7828=m
CONFIG_SENSORS_THMC50=m
CONFIG_SENSORS_VIA686A=m
CONFIG_SENSORS_VT1211=m
CONFIG_SENSORS_VT8231=m
CONFIG_SENSORS_W83781D=m
CONFIG_SENSORS_W83791D=m
CONFIG_SENSORS_W83792D=m
CONFIG_SENSORS_W83793=m
CONFIG_SENSORS_W83L785TS=m
CONFIG_SENSORS_W83L786NG=m
CONFIG_SENSORS_W83627HF=m
CONFIG_SENSORS_W83627EHF=m
CONFIG_SENSORS_HDAPS=m
# CONFIG_SENSORS_LIS3LV02D is not set
CONFIG_SENSORS_APPLESMC=m
# CONFIG_HWMON_DEBUG_CHIP is not set
CONFIG_THERMAL=y
CONFIG_THERMAL_HWMON=y
CONFIG_WATCHDOG=y
# CONFIG_WATCHDOG_NOWAYOUT is not set
#
# Watchdog Device Drivers
#
CONFIG_SOFT_WATCHDOG=m
CONFIG_ACQUIRE_WDT=m
CONFIG_ADVANTECH_WDT=m
CONFIG_ALIM1535_WDT=m
CONFIG_ALIM7101_WDT=m
CONFIG_SC520_WDT=m
CONFIG_EUROTECH_WDT=m
CONFIG_IB700_WDT=m
CONFIG_IBMASR=m
CONFIG_WAFER_WDT=m
CONFIG_I6300ESB_WDT=m
CONFIG_ITCO_WDT=m
CONFIG_ITCO_VENDOR_SUPPORT=y
CONFIG_IT8712F_WDT=m
# CONFIG_IT87_WDT is not set
# CONFIG_HP_WATCHDOG is not set
CONFIG_SC1200_WDT=m
CONFIG_PC87413_WDT=m
CONFIG_60XX_WDT=m
CONFIG_SBC8360_WDT=m
CONFIG_CPU5_WDT=m
CONFIG_SMSC37B787_WDT=m
CONFIG_W83627HF_WDT=m
CONFIG_W83697HF_WDT=m
# CONFIG_W83697UG_WDT is not set
CONFIG_W83877F_WDT=m
CONFIG_W83977F_WDT=m
CONFIG_MACHZ_WDT=m
CONFIG_SBC_EPX_C3_WATCHDOG=m
#
# PCI-based Watchdog Cards
#
CONFIG_PCIPCWATCHDOG=m
CONFIG_WDTPCI=m
CONFIG_WDT_501_PCI=y
#
# USB-based Watchdog Cards
#
CONFIG_USBPCWATCHDOG=m
CONFIG_SSB_POSSIBLE=y
#
# Sonics Silicon Backplane
#
CONFIG_SSB=m
CONFIG_SSB_SPROM=y
CONFIG_SSB_PCIHOST_POSSIBLE=y
CONFIG_SSB_PCIHOST=y
CONFIG_SSB_B43_PCI_BRIDGE=y
CONFIG_SSB_PCMCIAHOST_POSSIBLE=y
# CONFIG_SSB_PCMCIAHOST is not set
# CONFIG_SSB_DEBUG is not set
CONFIG_SSB_DRIVER_PCICORE_POSSIBLE=y
CONFIG_SSB_DRIVER_PCICORE=y
#
# Multifunction device drivers
#
# CONFIG_MFD_CORE is not set
CONFIG_MFD_SM501=m
# CONFIG_MFD_SM501_GPIO is not set
CONFIG_HTC_PASIC3=m
# CONFIG_UCB1400_CORE is not set
# CONFIG_MFD_TMIO is not set
# CONFIG_MFD_WM8400 is not set
# CONFIG_REGULATOR is not set
#
# Multimedia devices
#
#
# Multimedia core support
#
CONFIG_VIDEO_DEV=m
CONFIG_VIDEO_V4L2_COMMON=m
CONFIG_VIDEO_ALLOW_V4L1=y
CONFIG_VIDEO_V4L1_COMPAT=y
CONFIG_DVB_CORE=m
CONFIG_VIDEO_MEDIA=m
#
# Multimedia drivers
#
CONFIG_VIDEO_SAA7146=m
CONFIG_VIDEO_SAA7146_VV=m
CONFIG_MEDIA_ATTACH=y
CONFIG_MEDIA_TUNER=m
# CONFIG_MEDIA_TUNER_CUSTOMIZE is not set
CONFIG_MEDIA_TUNER_SIMPLE=m
CONFIG_MEDIA_TUNER_TDA8290=m
CONFIG_MEDIA_TUNER_TDA827X=m
CONFIG_MEDIA_TUNER_TDA18271=m
CONFIG_MEDIA_TUNER_TDA9887=m
CONFIG_MEDIA_TUNER_TEA5761=m
CONFIG_MEDIA_TUNER_TEA5767=m
CONFIG_MEDIA_TUNER_MT20XX=m
CONFIG_MEDIA_TUNER_MT2131=m
CONFIG_MEDIA_TUNER_XC2028=m
CONFIG_MEDIA_TUNER_XC5000=m
CONFIG_MEDIA_TUNER_MXL5005S=m
CONFIG_MEDIA_TUNER_MXL5007T=m
CONFIG_VIDEO_V4L2=m
CONFIG_VIDEO_V4L1=m
CONFIG_VIDEOBUF_GEN=m
CONFIG_VIDEOBUF_DMA_SG=m
CONFIG_VIDEOBUF_VMALLOC=m
CONFIG_VIDEOBUF_DMA_CONTIG=m
CONFIG_VIDEOBUF_DVB=m
CONFIG_VIDEO_BTCX=m
CONFIG_VIDEO_IR=m
CONFIG_VIDEO_TVEEPROM=m
CONFIG_VIDEO_TUNER=m
CONFIG_VIDEO_CAPTURE_DRIVERS=y
# CONFIG_VIDEO_ADV_DEBUG is not set
# CONFIG_VIDEO_FIXED_MINOR_RANGES is not set
CONFIG_VIDEO_HELPER_CHIPS_AUTO=y
CONFIG_VIDEO_IR_I2C=m
CONFIG_VIDEO_TVAUDIO=m
CONFIG_VIDEO_TDA7432=m
CONFIG_VIDEO_TDA9840=m
CONFIG_VIDEO_TDA9875=m
CONFIG_VIDEO_TEA6415C=m
CONFIG_VIDEO_TEA6420=m
CONFIG_VIDEO_MSP3400=m
CONFIG_VIDEO_CS5345=m
CONFIG_VIDEO_CS53L32A=m
CONFIG_VIDEO_M52790=m
CONFIG_VIDEO_WM8775=m
CONFIG_VIDEO_WM8739=m
CONFIG_VIDEO_VP27SMPX=m
CONFIG_VIDEO_BT819=m
CONFIG_VIDEO_BT856=m
CONFIG_VIDEO_KS0127=m
CONFIG_VIDEO_OV7670=m
CONFIG_VIDEO_SAA7110=m
CONFIG_VIDEO_SAA7111=m
CONFIG_VIDEO_SAA7114=m
CONFIG_VIDEO_SAA711X=m
CONFIG_VIDEO_SAA717X=m
CONFIG_VIDEO_TVP5150=m
CONFIG_VIDEO_VPX3220=m
CONFIG_VIDEO_CX25840=m
CONFIG_VIDEO_CX2341X=m
CONFIG_VIDEO_SAA7127=m
CONFIG_VIDEO_SAA7185=m
CONFIG_VIDEO_ADV7170=m
CONFIG_VIDEO_ADV7175=m
CONFIG_VIDEO_UPD64031A=m
CONFIG_VIDEO_UPD64083=m
CONFIG_VIDEO_VIVI=m
CONFIG_VIDEO_BT848=m
CONFIG_VIDEO_BT848_DVB=y
CONFIG_VIDEO_SAA6588=m
CONFIG_VIDEO_BWQCAM=m
CONFIG_VIDEO_CQCAM=m
CONFIG_VIDEO_W9966=m
CONFIG_VIDEO_CPIA=m
CONFIG_VIDEO_CPIA_PP=m
CONFIG_VIDEO_CPIA_USB=m
CONFIG_VIDEO_CPIA2=m
CONFIG_VIDEO_SAA5246A=m
CONFIG_VIDEO_SAA5249=m
CONFIG_VIDEO_STRADIS=m
CONFIG_VIDEO_ZORAN=m
CONFIG_VIDEO_ZORAN_DC30=m
CONFIG_VIDEO_ZORAN_ZR36060=m
CONFIG_VIDEO_ZORAN_BUZ=m
CONFIG_VIDEO_ZORAN_DC10=m
CONFIG_VIDEO_ZORAN_LML33=m
CONFIG_VIDEO_ZORAN_LML33R10=m
CONFIG_VIDEO_ZORAN_AVS6EYES=m
CONFIG_VIDEO_MEYE=m
CONFIG_VIDEO_SAA7134=m
CONFIG_VIDEO_SAA7134_ALSA=m
CONFIG_VIDEO_SAA7134_DVB=m
CONFIG_VIDEO_MXB=m
CONFIG_VIDEO_HEXIUM_ORION=m
CONFIG_VIDEO_HEXIUM_GEMINI=m
CONFIG_VIDEO_CX23885=m
CONFIG_VIDEO_AU0828=m
CONFIG_VIDEO_IVTV=m
CONFIG_VIDEO_FB_IVTV=m
CONFIG_VIDEO_CX18=m
CONFIG_VIDEO_CAFE_CCIC=m
CONFIG_SOC_CAMERA=m
CONFIG_SOC_CAMERA_MT9M001=m
CONFIG_MT9M001_PCA9536_SWITCH=y
# CONFIG_SOC_CAMERA_MT9M111 is not set
CONFIG_SOC_CAMERA_MT9V022=m
CONFIG_MT9V022_PCA9536_SWITCH=y
CONFIG_SOC_CAMERA_PLATFORM=m
CONFIG_VIDEO_SH_MOBILE_CEU=m
CONFIG_V4L_USB_DRIVERS=y
CONFIG_USB_VIDEO_CLASS=m
CONFIG_USB_VIDEO_CLASS_INPUT_EVDEV=y
CONFIG_USB_GSPCA=m
# CONFIG_USB_M5602 is not set
# CONFIG_USB_GSPCA_CONEX is not set
# CONFIG_USB_GSPCA_ETOMS is not set
# CONFIG_USB_GSPCA_FINEPIX is not set
# CONFIG_USB_GSPCA_MARS is not set
# CONFIG_USB_GSPCA_OV519 is not set
# CONFIG_USB_GSPCA_PAC207 is not set
# CONFIG_USB_GSPCA_PAC7311 is not set
# CONFIG_USB_GSPCA_SONIXB is not set
# CONFIG_USB_GSPCA_SONIXJ is not set
# CONFIG_USB_GSPCA_SPCA500 is not set
# CONFIG_USB_GSPCA_SPCA501 is not set
# CONFIG_USB_GSPCA_SPCA505 is not set
# CONFIG_USB_GSPCA_SPCA506 is not set
# CONFIG_USB_GSPCA_SPCA508 is not set
# CONFIG_USB_GSPCA_SPCA561 is not set
# CONFIG_USB_GSPCA_STK014 is not set
# CONFIG_USB_GSPCA_SUNPLUS is not set
# CONFIG_USB_GSPCA_T613 is not set
# CONFIG_USB_GSPCA_TV8532 is not set
# CONFIG_USB_GSPCA_VC032X is not set
# CONFIG_USB_GSPCA_ZC3XX is not set
CONFIG_VIDEO_PVRUSB2=m
CONFIG_VIDEO_PVRUSB2_SYSFS=y
CONFIG_VIDEO_PVRUSB2_DVB=y
# CONFIG_VIDEO_PVRUSB2_DEBUGIFC is not set
CONFIG_VIDEO_EM28XX=m
CONFIG_VIDEO_EM28XX_ALSA=m
CONFIG_VIDEO_EM28XX_DVB=m
CONFIG_VIDEO_USBVISION=m
CONFIG_VIDEO_USBVIDEO=m
CONFIG_USB_VICAM=m
CONFIG_USB_IBMCAM=m
CONFIG_USB_KONICAWC=m
CONFIG_USB_QUICKCAM_MESSENGER=m
CONFIG_USB_ET61X251=m
CONFIG_VIDEO_OVCAMCHIP=m
CONFIG_USB_W9968CF=m
# CONFIG_USB_OV511 is not set
CONFIG_USB_SE401=m
CONFIG_USB_SN9C102=m
CONFIG_USB_STV680=m
CONFIG_USB_ZC0301=m
CONFIG_USB_PWC=m
# CONFIG_USB_PWC_DEBUG is not set
CONFIG_USB_ZR364XX=m
CONFIG_USB_STKWEBCAM=m
CONFIG_USB_S2255=m
CONFIG_RADIO_ADAPTERS=y
CONFIG_RADIO_GEMTEK_PCI=m
CONFIG_RADIO_MAXIRADIO=m
CONFIG_RADIO_MAESTRO=m
CONFIG_USB_DSBR=m
CONFIG_USB_SI470X=m
# CONFIG_USB_MR800 is not set
CONFIG_DVB_CAPTURE_DRIVERS=y
#
# Supported SAA7146 based PCI Adapters
#
CONFIG_TTPCI_EEPROM=m
CONFIG_DVB_AV7110=m
# CONFIG_DVB_AV7110_FIRMWARE is not set
CONFIG_DVB_AV7110_OSD=y
CONFIG_DVB_BUDGET_CORE=m
CONFIG_DVB_BUDGET=m
CONFIG_DVB_BUDGET_CI=m
CONFIG_DVB_BUDGET_AV=m
CONFIG_DVB_BUDGET_PATCH=m
#
# Supported USB Adapters
#
CONFIG_DVB_TTUSB_BUDGET=m
CONFIG_DVB_TTUSB_DEC=m
CONFIG_DVB_SIANO_SMS1XXX=m
CONFIG_DVB_SIANO_SMS1XXX_SMS_IDS=y
#
# Supported FlexCopII (B2C2) Adapters
#
CONFIG_DVB_B2C2_FLEXCOP=m
CONFIG_DVB_B2C2_FLEXCOP_PCI=m
CONFIG_DVB_B2C2_FLEXCOP_USB=m
# CONFIG_DVB_B2C2_FLEXCOP_DEBUG is not set
#
# Supported BT878 Adapters
#
CONFIG_DVB_BT8XX=m
#
# Supported Pluto2 Adapters
#
CONFIG_DVB_PLUTO2=m
#
# Supported SDMC DM1105 Adapters
#
#
# Supported DVB Frontends
#
#
# Customise DVB Frontends
#
# CONFIG_DVB_FE_CUSTOMISE is not set
#
# DVB-S (satellite) frontends
#
CONFIG_DVB_CX24110=m
CONFIG_DVB_CX24123=m
CONFIG_DVB_MT312=m
CONFIG_DVB_S5H1420=m
# CONFIG_DVB_STV0288 is not set
# CONFIG_DVB_STB6000 is not set
CONFIG_DVB_STV0299=m
CONFIG_DVB_TDA8083=m
CONFIG_DVB_TDA10086=m
CONFIG_DVB_VES1X93=m
CONFIG_DVB_TUNER_ITD1000=m
CONFIG_DVB_TDA826X=m
CONFIG_DVB_TUA6100=m
# CONFIG_DVB_CX24116 is not set
# CONFIG_DVB_SI21XX is not set
#
# DVB-T (terrestrial) frontends
#
CONFIG_DVB_SP8870=m
CONFIG_DVB_SP887X=m
CONFIG_DVB_CX22700=m
CONFIG_DVB_CX22702=m
CONFIG_DVB_DRX397XD=m
CONFIG_DVB_L64781=m
CONFIG_DVB_TDA1004X=m
CONFIG_DVB_NXT6000=m
CONFIG_DVB_MT352=m
CONFIG_DVB_ZL10353=m
CONFIG_DVB_DIB3000MB=m
CONFIG_DVB_DIB3000MC=m
CONFIG_DVB_DIB7000M=m
CONFIG_DVB_DIB7000P=m
CONFIG_DVB_TDA10048=m
#
# DVB-C (cable) frontends
#
CONFIG_DVB_VES1820=m
CONFIG_DVB_TDA10021=m
CONFIG_DVB_TDA10023=m
CONFIG_DVB_STV0297=m
#
# ATSC (North American/Korean Terrestrial/Cable DTV) frontends
#
CONFIG_DVB_NXT200X=m
CONFIG_DVB_OR51211=m
CONFIG_DVB_OR51132=m
CONFIG_DVB_BCM3510=m
CONFIG_DVB_LGDT330X=m
CONFIG_DVB_S5H1409=m
CONFIG_DVB_AU8522=m
CONFIG_DVB_S5H1411=m
#
# Digital terrestrial only tuners/PLL
#
CONFIG_DVB_PLL=m
CONFIG_DVB_TUNER_DIB0070=m
#
# SEC control devices for DVB-S
#
CONFIG_DVB_LNBP21=m
CONFIG_DVB_ISL6405=m
CONFIG_DVB_ISL6421=m
# CONFIG_DVB_LGS8GL5 is not set
#
# Tools to develop new frontends
#
# CONFIG_DVB_DUMMY_FE is not set
# CONFIG_DVB_AF9013 is not set
# CONFIG_DAB is not set
#
# Graphics support
#
CONFIG_AGP=y
CONFIG_AGP_AMD64=y
CONFIG_AGP_INTEL=m
CONFIG_AGP_SIS=m
CONFIG_AGP_VIA=m
CONFIG_DRM=m
CONFIG_DRM_TDFX=m
CONFIG_DRM_R128=m
CONFIG_DRM_RADEON=m
CONFIG_DRM_I810=m
CONFIG_DRM_I830=m
CONFIG_DRM_I915=m
CONFIG_DRM_MGA=m
CONFIG_DRM_SIS=m
CONFIG_DRM_VIA=m
CONFIG_DRM_SAVAGE=m
CONFIG_VGASTATE=m
CONFIG_VIDEO_OUTPUT_CONTROL=m
CONFIG_FB=y
CONFIG_FIRMWARE_EDID=y
CONFIG_FB_DDC=m
CONFIG_FB_BOOT_VESA_SUPPORT=y
CONFIG_FB_CFB_FILLRECT=y
CONFIG_FB_CFB_COPYAREA=y
CONFIG_FB_CFB_IMAGEBLIT=y
# CONFIG_FB_CFB_REV_PIXELS_IN_BYTE is not set
CONFIG_FB_SYS_FILLRECT=m
CONFIG_FB_SYS_COPYAREA=m
CONFIG_FB_SYS_IMAGEBLIT=m
# CONFIG_FB_FOREIGN_ENDIAN is not set
CONFIG_FB_SYS_FOPS=m
CONFIG_FB_DEFERRED_IO=y
CONFIG_FB_HECUBA=m
CONFIG_FB_SVGALIB=m
# CONFIG_FB_MACMODES is not set
CONFIG_FB_BACKLIGHT=y
CONFIG_FB_MODE_HELPERS=y
CONFIG_FB_TILEBLITTING=y
#
# Frame buffer hardware drivers
#
CONFIG_FB_CIRRUS=m
CONFIG_FB_PM2=m
CONFIG_FB_PM2_FIFO_DISCONNECT=y
CONFIG_FB_CYBER2000=m
CONFIG_FB_ARC=m
CONFIG_FB_ASILIANT=y
CONFIG_FB_IMSTT=y
CONFIG_FB_VGA16=m
CONFIG_FB_UVESA=m
# CONFIG_FB_VESA is not set
CONFIG_FB_EFI=y
CONFIG_FB_N411=m
CONFIG_FB_HGA=m
# CONFIG_FB_HGA_ACCEL is not set
CONFIG_FB_S1D13XXX=m
CONFIG_FB_NVIDIA=m
CONFIG_FB_NVIDIA_I2C=y
# CONFIG_FB_NVIDIA_DEBUG is not set
CONFIG_FB_NVIDIA_BACKLIGHT=y
CONFIG_FB_RIVA=m
CONFIG_FB_RIVA_I2C=y
# CONFIG_FB_RIVA_DEBUG is not set
CONFIG_FB_RIVA_BACKLIGHT=y
CONFIG_FB_LE80578=m
CONFIG_FB_CARILLO_RANCH=m
CONFIG_FB_INTEL=m
# CONFIG_FB_INTEL_DEBUG is not set
CONFIG_FB_INTEL_I2C=y
CONFIG_FB_MATROX=m
CONFIG_FB_MATROX_MILLENIUM=y
CONFIG_FB_MATROX_MYSTIQUE=y
CONFIG_FB_MATROX_G=y
CONFIG_FB_MATROX_I2C=m
CONFIG_FB_MATROX_MAVEN=m
CONFIG_FB_MATROX_MULTIHEAD=y
CONFIG_FB_RADEON=m
CONFIG_FB_RADEON_I2C=y
CONFIG_FB_RADEON_BACKLIGHT=y
# CONFIG_FB_RADEON_DEBUG is not set
CONFIG_FB_ATY128=m
CONFIG_FB_ATY128_BACKLIGHT=y
CONFIG_FB_ATY=m
CONFIG_FB_ATY_CT=y
CONFIG_FB_ATY_GENERIC_LCD=y
CONFIG_FB_ATY_GX=y
CONFIG_FB_ATY_BACKLIGHT=y
CONFIG_FB_S3=m
CONFIG_FB_SAVAGE=m
CONFIG_FB_SAVAGE_I2C=y
CONFIG_FB_SAVAGE_ACCEL=y
CONFIG_FB_SIS=m
CONFIG_FB_SIS_300=y
CONFIG_FB_SIS_315=y
# CONFIG_FB_VIA is not set
CONFIG_FB_NEOMAGIC=m
CONFIG_FB_KYRO=m
CONFIG_FB_3DFX=m
# CONFIG_FB_3DFX_ACCEL is not set
CONFIG_FB_VOODOO1=m
CONFIG_FB_VT8623=m
CONFIG_FB_TRIDENT=m
# CONFIG_FB_TRIDENT_ACCEL is not set
CONFIG_FB_ARK=m
CONFIG_FB_PM3=m
CONFIG_FB_CARMINE=m
CONFIG_FB_CARMINE_DRAM_EVAL=y
# CONFIG_CARMINE_DRAM_CUSTOM is not set
CONFIG_FB_GEODE=y
CONFIG_FB_GEODE_LX=m
CONFIG_FB_GEODE_GX=m
CONFIG_FB_GEODE_GX1=m
CONFIG_FB_SM501=m
# CONFIG_FB_VIRTUAL is not set
CONFIG_XEN_FBDEV_FRONTEND=m
# CONFIG_FB_METRONOME is not set
# CONFIG_FB_MB862XX is not set
CONFIG_BACKLIGHT_LCD_SUPPORT=y
CONFIG_LCD_CLASS_DEVICE=m
CONFIG_LCD_LTV350QV=m
CONFIG_LCD_ILI9320=m
# CONFIG_LCD_TDO24M is not set
CONFIG_LCD_VGG2432A4=m
CONFIG_LCD_PLATFORM=m
CONFIG_BACKLIGHT_CLASS_DEVICE=y
CONFIG_BACKLIGHT_CORGI=m
CONFIG_BACKLIGHT_PROGEAR=m
CONFIG_BACKLIGHT_CARILLO_RANCH=m
CONFIG_BACKLIGHT_MBP_NVIDIA=m
# CONFIG_BACKLIGHT_SAHARA is not set
#
# Display device support
#
CONFIG_DISPLAY_SUPPORT=m
#
# Display hardware drivers
#
#
# Console display driver support
#
CONFIG_VGA_CONSOLE=y
# CONFIG_VGACON_SOFT_SCROLLBACK is not set
CONFIG_DUMMY_CONSOLE=y
CONFIG_FRAMEBUFFER_CONSOLE=m
# CONFIG_FRAMEBUFFER_CONSOLE_DETECT_PRIMARY is not set
# CONFIG_FRAMEBUFFER_CONSOLE_ROTATION is not set
# CONFIG_FONTS is not set
CONFIG_FONT_8x8=y
CONFIG_FONT_8x16=y
# CONFIG_LOGO is not set
CONFIG_SOUND=m
CONFIG_SOUND_OSS_CORE=y
CONFIG_SND=m
CONFIG_SND_TIMER=m
CONFIG_SND_PCM=m
CONFIG_SND_HWDEP=m
CONFIG_SND_RAWMIDI=m
CONFIG_SND_SEQUENCER=m
CONFIG_SND_SEQ_DUMMY=m
CONFIG_SND_OSSEMUL=y
CONFIG_SND_MIXER_OSS=m
CONFIG_SND_PCM_OSS=m
CONFIG_SND_PCM_OSS_PLUGINS=y
CONFIG_SND_SEQUENCER_OSS=y
CONFIG_SND_DYNAMIC_MINORS=y
CONFIG_SND_SUPPORT_OLD_API=y
CONFIG_SND_VERBOSE_PROCFS=y
# CONFIG_SND_VERBOSE_PRINTK is not set
# CONFIG_SND_DEBUG is not set
CONFIG_SND_VMASTER=y
CONFIG_SND_MPU401_UART=m
CONFIG_SND_OPL3_LIB=m
CONFIG_SND_VX_LIB=m
CONFIG_SND_AC97_CODEC=m
CONFIG_SND_DRIVERS=y
CONFIG_SND_PCSP=m
CONFIG_SND_DUMMY=m
CONFIG_SND_VIRMIDI=m
CONFIG_SND_MTPAV=m
CONFIG_SND_MTS64=m
CONFIG_SND_SERIAL_U16550=m
CONFIG_SND_MPU401=m
CONFIG_SND_PORTMAN2X4=m
CONFIG_SND_AC97_POWER_SAVE=y
CONFIG_SND_AC97_POWER_SAVE_DEFAULT=0
CONFIG_SND_SB_COMMON=m
CONFIG_SND_SB16_DSP=m
CONFIG_SND_PCI=y
CONFIG_SND_AD1889=m
CONFIG_SND_ALS300=m
CONFIG_SND_ALS4000=m
CONFIG_SND_ALI5451=m
CONFIG_SND_ATIIXP=m
CONFIG_SND_ATIIXP_MODEM=m
CONFIG_SND_AU8810=m
CONFIG_SND_AU8820=m
CONFIG_SND_AU8830=m
CONFIG_SND_AW2=m
CONFIG_SND_AZT3328=m
CONFIG_SND_BT87X=m
# CONFIG_SND_BT87X_OVERCLOCK is not set
CONFIG_SND_CA0106=m
CONFIG_SND_CMIPCI=m
CONFIG_SND_OXYGEN_LIB=m
CONFIG_SND_OXYGEN=m
CONFIG_SND_CS4281=m
CONFIG_SND_CS46XX=m
CONFIG_SND_CS46XX_NEW_DSP=y
CONFIG_SND_CS5530=m
CONFIG_SND_DARLA20=m
CONFIG_SND_GINA20=m
CONFIG_SND_LAYLA20=m
CONFIG_SND_DARLA24=m
CONFIG_SND_GINA24=m
CONFIG_SND_LAYLA24=m
CONFIG_SND_MONA=m
CONFIG_SND_MIA=m
CONFIG_SND_ECHO3G=m
CONFIG_SND_INDIGO=m
CONFIG_SND_INDIGOIO=m
CONFIG_SND_INDIGODJ=m
CONFIG_SND_EMU10K1=m
CONFIG_SND_EMU10K1X=m
CONFIG_SND_ENS1370=m
CONFIG_SND_ENS1371=m
CONFIG_SND_ES1938=m
CONFIG_SND_ES1968=m
CONFIG_SND_FM801=m
CONFIG_SND_FM801_TEA575X_BOOL=y
CONFIG_SND_FM801_TEA575X=m
CONFIG_SND_HDA_INTEL=m
# CONFIG_SND_HDA_HWDEP is not set
# CONFIG_SND_HDA_INPUT_BEEP is not set
CONFIG_SND_HDA_CODEC_REALTEK=y
CONFIG_SND_HDA_CODEC_ANALOG=y
CONFIG_SND_HDA_CODEC_SIGMATEL=y
CONFIG_SND_HDA_CODEC_VIA=y
CONFIG_SND_HDA_CODEC_ATIHDMI=y
CONFIG_SND_HDA_CODEC_NVHDMI=y
CONFIG_SND_HDA_CODEC_CONEXANT=y
CONFIG_SND_HDA_CODEC_CMEDIA=y
CONFIG_SND_HDA_CODEC_SI3054=y
CONFIG_SND_HDA_GENERIC=y
CONFIG_SND_HDA_POWER_SAVE=y
CONFIG_SND_HDA_POWER_SAVE_DEFAULT=0
CONFIG_SND_HDSP=m
CONFIG_SND_HDSPM=m
CONFIG_SND_HIFIER=m
CONFIG_SND_ICE1712=m
CONFIG_SND_ICE1724=m
CONFIG_SND_INTEL8X0=m
CONFIG_SND_INTEL8X0M=m
CONFIG_SND_KORG1212=m
CONFIG_SND_MAESTRO3=m
CONFIG_SND_MIXART=m
CONFIG_SND_NM256=m
CONFIG_SND_PCXHR=m
CONFIG_SND_RIPTIDE=m
CONFIG_SND_RME32=m
CONFIG_SND_RME96=m
CONFIG_SND_RME9652=m
CONFIG_SND_SONICVIBES=m
CONFIG_SND_TRIDENT=m
CONFIG_SND_VIA82XX=m
CONFIG_SND_VIA82XX_MODEM=m
CONFIG_SND_VIRTUOSO=m
CONFIG_SND_VX222=m
CONFIG_SND_YMFPCI=m
CONFIG_SND_SPI=y
CONFIG_SND_USB=y
CONFIG_SND_USB_AUDIO=m
CONFIG_SND_USB_USX2Y=m
CONFIG_SND_USB_CAIAQ=m
CONFIG_SND_USB_CAIAQ_INPUT=y
# CONFIG_SND_USB_US122L is not set
CONFIG_SND_PCMCIA=y
CONFIG_SND_VXPOCKET=m
CONFIG_SND_PDAUDIOCF=m
CONFIG_SND_SOC=m
# CONFIG_SND_SOC_ALL_CODECS is not set
CONFIG_SOUND_PRIME=m
CONFIG_SOUND_OSS=m
# CONFIG_SOUND_TRACEINIT is not set
CONFIG_SOUND_DMAP=y
CONFIG_SOUND_SSCAPE=m
CONFIG_SOUND_VMIDI=m
CONFIG_SOUND_TRIX=m
CONFIG_SOUND_MSS=m
CONFIG_SOUND_MPU401=m
CONFIG_SOUND_PAS=m
CONFIG_SOUND_PSS=m
CONFIG_PSS_MIXER=y
# CONFIG_PSS_HAVE_BOOT is not set
CONFIG_SOUND_SB=m
CONFIG_SOUND_YM3812=m
CONFIG_SOUND_UART6850=m
CONFIG_SOUND_AEDSP16=m
CONFIG_SC6600=y
CONFIG_SC6600_JOY=y
CONFIG_SC6600_CDROM=4
CONFIG_SC6600_CDROMBASE=0
CONFIG_SOUND_KAHLUA=m
CONFIG_AC97_BUS=m
CONFIG_HID_SUPPORT=y
CONFIG_HID=m
# CONFIG_HID_DEBUG is not set
CONFIG_HIDRAW=y
#
# USB Input Devices
#
CONFIG_USB_HID=m
# CONFIG_HID_PID is not set
CONFIG_USB_HIDDEV=y
#
# USB HID Boot Protocol drivers
#
CONFIG_USB_KBD=m
CONFIG_USB_MOUSE=m
#
# Special HID drivers
#
CONFIG_HID_COMPAT=y
CONFIG_HID_A4TECH=m
CONFIG_HID_APPLE=m
CONFIG_HID_BELKIN=m
CONFIG_HID_BRIGHT=m
CONFIG_HID_CHERRY=m
CONFIG_HID_CHICONY=m
CONFIG_HID_CYPRESS=m
CONFIG_HID_DELL=m
CONFIG_HID_EZKEY=m
CONFIG_HID_GYRATION=m
CONFIG_HID_LOGITECH=m
# CONFIG_LOGITECH_FF is not set
# CONFIG_LOGIRUMBLEPAD2_FF is not set
CONFIG_HID_MICROSOFT=m
CONFIG_HID_MONTEREY=m
CONFIG_HID_PANTHERLORD=m
# CONFIG_PANTHERLORD_FF is not set
CONFIG_HID_PETALYNX=m
CONFIG_HID_SAMSUNG=m
CONFIG_HID_SONY=m
CONFIG_HID_SUNPLUS=m
# CONFIG_THRUSTMASTER_FF is not set
# CONFIG_ZEROPLUS_FF is not set
CONFIG_USB_SUPPORT=y
CONFIG_USB_ARCH_HAS_HCD=y
CONFIG_USB_ARCH_HAS_OHCI=y
CONFIG_USB_ARCH_HAS_EHCI=y
CONFIG_USB=m
# CONFIG_USB_DEBUG is not set
# CONFIG_USB_ANNOUNCE_NEW_DEVICES is not set
#
# Miscellaneous USB options
#
CONFIG_USB_DEVICEFS=y
# CONFIG_USB_DEVICE_CLASS is not set
# CONFIG_USB_DYNAMIC_MINORS is not set
CONFIG_USB_SUSPEND=y
# CONFIG_USB_OTG is not set
CONFIG_USB_MON=y
# CONFIG_USB_WUSB is not set
# CONFIG_USB_WUSB_CBAF is not set
#
# USB Host Controller Drivers
#
CONFIG_USB_C67X00_HCD=m
CONFIG_USB_EHCI_HCD=m
CONFIG_USB_EHCI_ROOT_HUB_TT=y
CONFIG_USB_EHCI_TT_NEWSCHED=y
CONFIG_USB_ISP116X_HCD=m
CONFIG_USB_ISP1760_HCD=m
CONFIG_USB_OHCI_HCD=m
# CONFIG_USB_OHCI_HCD_SSB is not set
# CONFIG_USB_OHCI_BIG_ENDIAN_DESC is not set
# CONFIG_USB_OHCI_BIG_ENDIAN_MMIO is not set
CONFIG_USB_OHCI_LITTLE_ENDIAN=y
CONFIG_USB_UHCI_HCD=m
CONFIG_USB_U132_HCD=m
CONFIG_USB_SL811_HCD=m
CONFIG_USB_SL811_CS=m
CONFIG_USB_R8A66597_HCD=m
# CONFIG_USB_HWA_HCD is not set
#
# Enable Host or Gadget support to see Inventra options
#
#
# USB Device Class drivers
#
CONFIG_USB_ACM=m
CONFIG_USB_PRINTER=m
CONFIG_USB_WDM=m
# CONFIG_USB_TMC is not set
#
# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may also be needed;
#
#
# see USB_STORAGE Help for more information
#
CONFIG_USB_STORAGE=m
# CONFIG_USB_STORAGE_DEBUG is not set
CONFIG_USB_STORAGE_DATAFAB=y
CONFIG_USB_STORAGE_FREECOM=y
CONFIG_USB_STORAGE_ISD200=y
CONFIG_USB_STORAGE_DPCM=y
CONFIG_USB_STORAGE_USBAT=y
CONFIG_USB_STORAGE_SDDR09=y
CONFIG_USB_STORAGE_SDDR55=y
CONFIG_USB_STORAGE_JUMPSHOT=y
CONFIG_USB_STORAGE_ALAUDA=y
# CONFIG_USB_STORAGE_ONETOUCH is not set
CONFIG_USB_STORAGE_KARMA=y
# CONFIG_USB_STORAGE_CYPRESS_ATACB is not set
CONFIG_USB_LIBUSUAL=y
#
# USB Imaging devices
#
CONFIG_USB_MDC800=m
CONFIG_USB_MICROTEK=m
#
# USB port drivers
#
CONFIG_USB_USS720=m
CONFIG_USB_SERIAL=m
CONFIG_USB_EZUSB=y
CONFIG_USB_SERIAL_GENERIC=y
CONFIG_USB_SERIAL_AIRCABLE=m
CONFIG_USB_SERIAL_ARK3116=m
CONFIG_USB_SERIAL_BELKIN=m
CONFIG_USB_SERIAL_CH341=m
CONFIG_USB_SERIAL_WHITEHEAT=m
CONFIG_USB_SERIAL_DIGI_ACCELEPORT=m
CONFIG_USB_SERIAL_CP2101=m
CONFIG_USB_SERIAL_CYPRESS_M8=m
CONFIG_USB_SERIAL_EMPEG=m
CONFIG_USB_SERIAL_FTDI_SIO=m
CONFIG_USB_SERIAL_FUNSOFT=m
CONFIG_USB_SERIAL_VISOR=m
CONFIG_USB_SERIAL_IPAQ=m
# CONFIG_USB_SERIAL_IR is not set
CONFIG_USB_SERIAL_EDGEPORT=m
CONFIG_USB_SERIAL_EDGEPORT_TI=m
CONFIG_USB_SERIAL_GARMIN=m
CONFIG_USB_SERIAL_IPW=m
# CONFIG_USB_SERIAL_IUU is not set
CONFIG_USB_SERIAL_KEYSPAN_PDA=m
CONFIG_USB_SERIAL_KEYSPAN=m
CONFIG_USB_SERIAL_KLSI=m
CONFIG_USB_SERIAL_KOBIL_SCT=m
CONFIG_USB_SERIAL_MCT_U232=m
CONFIG_USB_SERIAL_MOS7720=m
CONFIG_USB_SERIAL_MOS7840=m
CONFIG_USB_SERIAL_MOTOROLA=m
CONFIG_USB_SERIAL_NAVMAN=m
CONFIG_USB_SERIAL_PL2303=m
CONFIG_USB_SERIAL_OTI6858=m
CONFIG_USB_SERIAL_SPCP8X5=m
CONFIG_USB_SERIAL_HP4X=m
CONFIG_USB_SERIAL_SAFE=m
# CONFIG_USB_SERIAL_SAFE_PADDED is not set
CONFIG_USB_SERIAL_SIERRAWIRELESS=m
CONFIG_USB_SERIAL_TI=m
CONFIG_USB_SERIAL_CYBERJACK=m
CONFIG_USB_SERIAL_XIRCOM=m
CONFIG_USB_SERIAL_OPTION=m
CONFIG_USB_SERIAL_OMNINET=m
CONFIG_USB_SERIAL_DEBUG=m
#
# USB Miscellaneous drivers
#
CONFIG_USB_EMI62=m
CONFIG_USB_EMI26=m
CONFIG_USB_ADUTUX=m
# CONFIG_USB_SEVSEG is not set
CONFIG_USB_RIO500=m
CONFIG_USB_LEGOTOWER=m
CONFIG_USB_LCD=m
CONFIG_USB_BERRY_CHARGE=m
CONFIG_USB_LED=m
CONFIG_USB_CYPRESS_CY7C63=m
CONFIG_USB_CYTHERM=m
CONFIG_USB_PHIDGET=m
CONFIG_USB_PHIDGETKIT=m
CONFIG_USB_PHIDGETMOTORCONTROL=m
CONFIG_USB_PHIDGETSERVO=m
CONFIG_USB_IDMOUSE=m
CONFIG_USB_FTDI_ELAN=m
CONFIG_USB_APPLEDISPLAY=m
CONFIG_USB_SISUSBVGA=m
# CONFIG_USB_SISUSBVGA_CON is not set
CONFIG_USB_LD=m
CONFIG_USB_TRANCEVIBRATOR=m
CONFIG_USB_IOWARRIOR=m
# CONFIG_USB_TEST is not set
CONFIG_USB_ISIGHTFW=m
# CONFIG_USB_VST is not set
CONFIG_USB_ATM=m
CONFIG_USB_SPEEDTOUCH=m
CONFIG_USB_CXACRU=m
CONFIG_USB_UEAGLEATM=m
CONFIG_USB_XUSBATM=m
# CONFIG_UWB is not set
CONFIG_MMC=m
# CONFIG_MMC_DEBUG is not set
# CONFIG_MMC_UNSAFE_RESUME is not set
#
# MMC/SD/SDIO Card Drivers
#
CONFIG_MMC_BLOCK=m
CONFIG_MMC_BLOCK_BOUNCE=y
CONFIG_SDIO_UART=m
# CONFIG_MMC_TEST is not set
#
# MMC/SD/SDIO Host Controller Drivers
#
CONFIG_MMC_SDHCI=m
CONFIG_MMC_SDHCI_PCI=m
CONFIG_MMC_RICOH_MMC=m
CONFIG_MMC_WBSD=m
CONFIG_MMC_TIFM_SD=m
CONFIG_MMC_SPI=m
CONFIG_MMC_SDRICOH_CS=m
# CONFIG_MEMSTICK is not set
CONFIG_NEW_LEDS=y
CONFIG_LEDS_CLASS=m
#
# LED drivers
#
CONFIG_LEDS_PCA9532=m
CONFIG_LEDS_GPIO=m
# CONFIG_LEDS_HP_DISK is not set
# CONFIG_LEDS_CLEVO_MAIL is not set
CONFIG_LEDS_PCA955X=m
#
# LED Triggers
#
CONFIG_LEDS_TRIGGERS=y
CONFIG_LEDS_TRIGGER_TIMER=m
CONFIG_LEDS_TRIGGER_HEARTBEAT=m
# CONFIG_LEDS_TRIGGER_BACKLIGHT is not set
CONFIG_LEDS_TRIGGER_DEFAULT_ON=m
# CONFIG_ACCESSIBILITY is not set
CONFIG_INFINIBAND=m
CONFIG_INFINIBAND_USER_MAD=m
CONFIG_INFINIBAND_USER_ACCESS=m
CONFIG_INFINIBAND_USER_MEM=y
CONFIG_INFINIBAND_ADDR_TRANS=y
CONFIG_INFINIBAND_MTHCA=m
CONFIG_INFINIBAND_MTHCA_DEBUG=y
CONFIG_INFINIBAND_IPATH=m
CONFIG_INFINIBAND_AMSO1100=m
CONFIG_INFINIBAND_AMSO1100_DEBUG=y
CONFIG_INFINIBAND_CXGB3=m
# CONFIG_INFINIBAND_CXGB3_DEBUG is not set
CONFIG_MLX4_INFINIBAND=m
# CONFIG_INFINIBAND_NES is not set
CONFIG_INFINIBAND_IPOIB=m
CONFIG_INFINIBAND_IPOIB_CM=y
CONFIG_INFINIBAND_IPOIB_DEBUG=y
# CONFIG_INFINIBAND_IPOIB_DEBUG_DATA is not set
CONFIG_INFINIBAND_SRP=m
CONFIG_INFINIBAND_ISER=m
CONFIG_EDAC=y
#
# Reporting subsystems
#
# CONFIG_EDAC_DEBUG is not set
CONFIG_EDAC_MM_EDAC=m
CONFIG_EDAC_E752X=m
CONFIG_EDAC_I82975X=m
CONFIG_EDAC_I3000=m
# CONFIG_EDAC_X38 is not set
CONFIG_EDAC_I5000=m
CONFIG_EDAC_I5100=m
CONFIG_RTC_LIB=y
CONFIG_RTC_CLASS=y
CONFIG_RTC_HCTOSYS=y
CONFIG_RTC_HCTOSYS_DEVICE="rtc0"
# CONFIG_RTC_DEBUG is not set
#
# RTC interfaces
#
CONFIG_RTC_INTF_SYSFS=y
CONFIG_RTC_INTF_PROC=y
CONFIG_RTC_INTF_DEV=y
CONFIG_RTC_INTF_DEV_UIE_EMUL=y
CONFIG_RTC_DRV_TEST=m
#
# I2C RTC drivers
#
CONFIG_RTC_DRV_DS1307=m
CONFIG_RTC_DRV_DS1374=m
CONFIG_RTC_DRV_DS1672=m
CONFIG_RTC_DRV_MAX6900=m
CONFIG_RTC_DRV_RS5C372=m
CONFIG_RTC_DRV_ISL1208=m
CONFIG_RTC_DRV_X1205=m
CONFIG_RTC_DRV_PCF8563=m
CONFIG_RTC_DRV_PCF8583=m
CONFIG_RTC_DRV_M41T80=m
CONFIG_RTC_DRV_M41T80_WDT=y
# CONFIG_RTC_DRV_S35390A is not set
CONFIG_RTC_DRV_FM3130=m
# CONFIG_RTC_DRV_RX8581 is not set
#
# SPI RTC drivers
#
CONFIG_RTC_DRV_M41T94=m
CONFIG_RTC_DRV_DS1305=m
# CONFIG_RTC_DRV_DS1390 is not set
CONFIG_RTC_DRV_MAX6902=m
# CONFIG_RTC_DRV_R9701 is not set
CONFIG_RTC_DRV_RS5C348=m
# CONFIG_RTC_DRV_DS3234 is not set
#
# Platform RTC drivers
#
CONFIG_RTC_DRV_CMOS=y
# CONFIG_RTC_DRV_DS1286 is not set
# CONFIG_RTC_DRV_DS1511 is not set
CONFIG_RTC_DRV_DS1553=m
CONFIG_RTC_DRV_DS1742=m
CONFIG_RTC_DRV_STK17TA8=m
CONFIG_RTC_DRV_M48T86=m
# CONFIG_RTC_DRV_M48T35 is not set
CONFIG_RTC_DRV_M48T59=m
# CONFIG_RTC_DRV_BQ4802 is not set
CONFIG_RTC_DRV_V3020=m
#
# on-CPU RTC drivers
#
CONFIG_DMADEVICES=y
#
# DMA Devices
#
CONFIG_INTEL_IOATDMA=m
CONFIG_DMA_ENGINE=y
#
# DMA Clients
#
CONFIG_NET_DMA=y
# CONFIG_DMATEST is not set
CONFIG_DCA=m
CONFIG_AUXDISPLAY=y
CONFIG_KS0108=m
CONFIG_KS0108_PORT=0x378
CONFIG_KS0108_DELAY=2
CONFIG_CFAG12864B=m
CONFIG_CFAG12864B_RATE=20
CONFIG_UIO=m
CONFIG_UIO_CIF=m
CONFIG_UIO_PDRV=m
CONFIG_UIO_PDRV_GENIRQ=m
CONFIG_UIO_SMX=m
# CONFIG_UIO_SERCOS3 is not set
CONFIG_XEN_BALLOON=y
CONFIG_XEN_SCRUB_PAGES=y
CONFIG_XEN_DEV_EVTCHN=y
CONFIG_XEN_BACKEND=y
CONFIG_XEN_BLKDEV_BACKEND=y
CONFIG_XENFS=y
CONFIG_XEN_COMPAT_XENFS=y
# CONFIG_STAGING is not set
CONFIG_STAGING_EXCLUDE_BUILD=y
#
# Firmware Drivers
#
CONFIG_EDD=y
CONFIG_EDD_OFF=y
CONFIG_FIRMWARE_MEMMAP=y
CONFIG_EFI_VARS=y
CONFIG_DELL_RBU=m
CONFIG_DCDBAS=m
CONFIG_DMIID=y
CONFIG_ISCSI_IBFT_FIND=y
CONFIG_ISCSI_IBFT=m
#
# File systems
#
CONFIG_EXT2_FS=m
CONFIG_EXT2_FS_XATTR=y
CONFIG_EXT2_FS_POSIX_ACL=y
CONFIG_EXT2_FS_SECURITY=y
# CONFIG_EXT2_FS_XIP is not set
CONFIG_EXT3_FS=m
CONFIG_EXT3_FS_XATTR=y
CONFIG_EXT3_FS_POSIX_ACL=y
CONFIG_EXT3_FS_SECURITY=y
# CONFIG_EXT4_FS is not set
CONFIG_JBD=m
# CONFIG_JBD_DEBUG is not set
CONFIG_JBD2=m
# CONFIG_JBD2_DEBUG is not set
CONFIG_FS_MBCACHE=m
CONFIG_REISERFS_FS=m
# CONFIG_REISERFS_CHECK is not set
# CONFIG_REISERFS_PROC_INFO is not set
CONFIG_REISERFS_FS_XATTR=y
CONFIG_REISERFS_FS_POSIX_ACL=y
CONFIG_REISERFS_FS_SECURITY=y
CONFIG_JFS_FS=m
CONFIG_JFS_POSIX_ACL=y
CONFIG_JFS_SECURITY=y
# CONFIG_JFS_DEBUG is not set
CONFIG_JFS_STATISTICS=y
CONFIG_FS_POSIX_ACL=y
CONFIG_FILE_LOCKING=y
CONFIG_XFS_FS=m
CONFIG_XFS_QUOTA=y
CONFIG_XFS_POSIX_ACL=y
CONFIG_XFS_RT=y
# CONFIG_XFS_DEBUG is not set
CONFIG_GFS2_FS=m
CONFIG_GFS2_FS_LOCKING_DLM=m
CONFIG_OCFS2_FS=m
CONFIG_OCFS2_FS_O2CB=m
CONFIG_OCFS2_FS_USERSPACE_CLUSTER=m
CONFIG_OCFS2_FS_STATS=y
CONFIG_OCFS2_DEBUG_MASKLOG=y
# CONFIG_OCFS2_DEBUG_FS is not set
# CONFIG_OCFS2_COMPAT_JBD is not set
CONFIG_DNOTIFY=y
CONFIG_INOTIFY=y
CONFIG_INOTIFY_USER=y
CONFIG_QUOTA=y
CONFIG_QUOTA_NETLINK_INTERFACE=y
CONFIG_PRINT_QUOTA_WARNING=y
CONFIG_QFMT_V1=m
CONFIG_QFMT_V2=m
CONFIG_QUOTACTL=y
CONFIG_AUTOFS_FS=m
CONFIG_AUTOFS4_FS=m
CONFIG_FUSE_FS=m
CONFIG_GENERIC_ACL=y
#
# CD-ROM/DVD Filesystems
#
CONFIG_ISO9660_FS=m
CONFIG_JOLIET=y
CONFIG_ZISOFS=y
CONFIG_UDF_FS=m
CONFIG_UDF_NLS=y
#
# DOS/FAT/NT Filesystems
#
CONFIG_FAT_FS=m
CONFIG_MSDOS_FS=m
CONFIG_VFAT_FS=m
CONFIG_FAT_DEFAULT_CODEPAGE=437
CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1"
CONFIG_NTFS_FS=m
# CONFIG_NTFS_DEBUG is not set
# CONFIG_NTFS_RW is not set
#
# Pseudo filesystems
#
CONFIG_PROC_FS=y
CONFIG_PROC_KCORE=y
CONFIG_PROC_VMCORE=y
CONFIG_PROC_SYSCTL=y
CONFIG_PROC_PAGE_MONITOR=y
CONFIG_SYSFS=y
CONFIG_TMPFS=y
CONFIG_TMPFS_POSIX_ACL=y
CONFIG_HUGETLBFS=y
CONFIG_HUGETLB_PAGE=y
CONFIG_CONFIGFS_FS=m
#
# Miscellaneous filesystems
#
CONFIG_ADFS_FS=m
# CONFIG_ADFS_FS_RW is not set
CONFIG_AFFS_FS=m
CONFIG_ECRYPT_FS=m
CONFIG_HFS_FS=m
CONFIG_HFSPLUS_FS=m
CONFIG_BEFS_FS=m
# CONFIG_BEFS_DEBUG is not set
CONFIG_BFS_FS=m
CONFIG_EFS_FS=m
CONFIG_UBIFS_FS=m
CONFIG_UBIFS_FS_XATTR=y
# CONFIG_UBIFS_FS_ADVANCED_COMPR is not set
CONFIG_UBIFS_FS_LZO=y
CONFIG_UBIFS_FS_ZLIB=y
# CONFIG_UBIFS_FS_DEBUG is not set
CONFIG_CRAMFS=y
CONFIG_VXFS_FS=m
CONFIG_MINIX_FS=m
CONFIG_OMFS_FS=m
CONFIG_HPFS_FS=m
CONFIG_QNX4FS_FS=m
CONFIG_ROMFS_FS=m
CONFIG_SYSV_FS=m
CONFIG_UFS_FS=m
# CONFIG_UFS_FS_WRITE is not set
# CONFIG_UFS_DEBUG is not set
CONFIG_NETWORK_FILESYSTEMS=y
CONFIG_NFS_FS=m
CONFIG_NFS_V3=y
CONFIG_NFS_V3_ACL=y
CONFIG_NFS_V4=y
CONFIG_NFSD=m
CONFIG_NFSD_V2_ACL=y
CONFIG_NFSD_V3=y
CONFIG_NFSD_V3_ACL=y
CONFIG_NFSD_V4=y
CONFIG_LOCKD=m
CONFIG_LOCKD_V4=y
CONFIG_EXPORTFS=m
CONFIG_NFS_ACL_SUPPORT=m
CONFIG_NFS_COMMON=y
CONFIG_SUNRPC=m
CONFIG_SUNRPC_GSS=m
CONFIG_SUNRPC_XPRT_RDMA=m
# CONFIG_SUNRPC_REGISTER_V4 is not set
CONFIG_RPCSEC_GSS_KRB5=m
CONFIG_RPCSEC_GSS_SPKM3=m
CONFIG_SMB_FS=m
# CONFIG_SMB_NLS_DEFAULT is not set
CONFIG_CIFS=m
# CONFIG_CIFS_STATS is not set
CONFIG_CIFS_WEAK_PW_HASH=y
CONFIG_CIFS_UPCALL=y
# CONFIG_CIFS_XATTR is not set
# CONFIG_CIFS_DEBUG2 is not set
CONFIG_CIFS_EXPERIMENTAL=y
CONFIG_CIFS_DFS_UPCALL=y
CONFIG_NCP_FS=m
CONFIG_NCPFS_PACKET_SIGNING=y
CONFIG_NCPFS_IOCTL_LOCKING=y
CONFIG_NCPFS_STRONG=y
CONFIG_NCPFS_NFS_NS=y
CONFIG_NCPFS_OS2_NS=y
# CONFIG_NCPFS_SMALLDOS is not set
CONFIG_NCPFS_NLS=y
CONFIG_NCPFS_EXTRAS=y
CONFIG_CODA_FS=m
CONFIG_AFS_FS=m
# CONFIG_AFS_DEBUG is not set
#
# Partition Types
#
CONFIG_PARTITION_ADVANCED=y
CONFIG_ACORN_PARTITION=y
# CONFIG_ACORN_PARTITION_CUMANA is not set
# CONFIG_ACORN_PARTITION_EESOX is not set
CONFIG_ACORN_PARTITION_ICS=y
# CONFIG_ACORN_PARTITION_ADFS is not set
# CONFIG_ACORN_PARTITION_POWERTEC is not set
CONFIG_ACORN_PARTITION_RISCIX=y
CONFIG_OSF_PARTITION=y
CONFIG_AMIGA_PARTITION=y
CONFIG_ATARI_PARTITION=y
CONFIG_MAC_PARTITION=y
CONFIG_MSDOS_PARTITION=y
CONFIG_BSD_DISKLABEL=y
CONFIG_MINIX_SUBPARTITION=y
CONFIG_SOLARIS_X86_PARTITION=y
CONFIG_UNIXWARE_DISKLABEL=y
CONFIG_LDM_PARTITION=y
# CONFIG_LDM_DEBUG is not set
CONFIG_SGI_PARTITION=y
CONFIG_ULTRIX_PARTITION=y
CONFIG_SUN_PARTITION=y
CONFIG_KARMA_PARTITION=y
CONFIG_EFI_PARTITION=y
CONFIG_SYSV68_PARTITION=y
CONFIG_NLS=y
CONFIG_NLS_DEFAULT="cp437"
CONFIG_NLS_CODEPAGE_437=m
CONFIG_NLS_CODEPAGE_737=m
CONFIG_NLS_CODEPAGE_775=m
CONFIG_NLS_CODEPAGE_850=m
CONFIG_NLS_CODEPAGE_852=m
CONFIG_NLS_CODEPAGE_855=m
CONFIG_NLS_CODEPAGE_857=m
CONFIG_NLS_CODEPAGE_860=m
CONFIG_NLS_CODEPAGE_861=m
CONFIG_NLS_CODEPAGE_862=m
CONFIG_NLS_CODEPAGE_863=m
CONFIG_NLS_CODEPAGE_864=m
CONFIG_NLS_CODEPAGE_865=m
CONFIG_NLS_CODEPAGE_866=m
CONFIG_NLS_CODEPAGE_869=m
CONFIG_NLS_CODEPAGE_936=m
CONFIG_NLS_CODEPAGE_950=m
CONFIG_NLS_CODEPAGE_932=m
CONFIG_NLS_CODEPAGE_949=m
CONFIG_NLS_CODEPAGE_874=m
CONFIG_NLS_ISO8859_8=m
CONFIG_NLS_CODEPAGE_1250=m
CONFIG_NLS_CODEPAGE_1251=m
CONFIG_NLS_ASCII=m
CONFIG_NLS_ISO8859_1=m
CONFIG_NLS_ISO8859_2=m
CONFIG_NLS_ISO8859_3=m
CONFIG_NLS_ISO8859_4=m
CONFIG_NLS_ISO8859_5=m
CONFIG_NLS_ISO8859_6=m
CONFIG_NLS_ISO8859_7=m
CONFIG_NLS_ISO8859_9=m
CONFIG_NLS_ISO8859_13=m
CONFIG_NLS_ISO8859_14=m
CONFIG_NLS_ISO8859_15=m
CONFIG_NLS_KOI8_R=m
CONFIG_NLS_KOI8_U=m
CONFIG_NLS_UTF8=m
CONFIG_DLM=m
# CONFIG_DLM_DEBUG is not set
#
# Kernel hacking
#
CONFIG_TRACE_IRQFLAGS_SUPPORT=y
CONFIG_PRINTK_TIME=y
CONFIG_ALLOW_WARNINGS=y
# CONFIG_ENABLE_WARN_DEPRECATED is not set
# CONFIG_ENABLE_MUST_CHECK is not set
CONFIG_FRAME_WARN=2048
CONFIG_MAGIC_SYSRQ=y
CONFIG_UNUSED_SYMBOLS=y
CONFIG_DEBUG_FS=y
# CONFIG_HEADERS_CHECK is not set
CONFIG_DEBUG_KERNEL=y
# CONFIG_DEBUG_SHIRQ is not set
CONFIG_DETECT_SOFTLOCKUP=y
# CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC is not set
CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC_VALUE=0
CONFIG_SCHED_DEBUG=y
CONFIG_SCHEDSTATS=y
CONFIG_TIMER_STATS=y
# CONFIG_DEBUG_OBJECTS is not set
# CONFIG_SLUB_DEBUG_ON is not set
# CONFIG_SLUB_STATS is not set
# CONFIG_DEBUG_RT_MUTEXES is not set
# CONFIG_RT_MUTEX_TESTER is not set
# CONFIG_DEBUG_SPINLOCK is not set
# CONFIG_DEBUG_MUTEXES is not set
# CONFIG_DEBUG_LOCK_ALLOC is not set
# CONFIG_PROVE_LOCKING is not set
# CONFIG_LOCK_STAT is not set
# CONFIG_DEBUG_SPINLOCK_SLEEP is not set
# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
CONFIG_STACKTRACE=y
# CONFIG_DEBUG_KOBJECT is not set
CONFIG_DEBUG_BUGVERBOSE=y
CONFIG_DEBUG_INFO=y
# CONFIG_DEBUG_VM is not set
# CONFIG_DEBUG_VIRTUAL is not set
# CONFIG_DEBUG_WRITECOUNT is not set
CONFIG_DEBUG_MEMORY_INIT=y
# CONFIG_DEBUG_LIST is not set
# CONFIG_DEBUG_SG is not set
# CONFIG_DEBUG_NOTIFIERS is not set
CONFIG_FRAME_POINTER=y
# CONFIG_BOOT_PRINTK_DELAY is not set
# CONFIG_RCU_TORTURE_TEST is not set
# CONFIG_RCU_CPU_STALL_DETECTOR is not set
# CONFIG_KPROBES_SANITY_TEST is not set
# CONFIG_BACKTRACE_SELF_TEST is not set
# CONFIG_DEBUG_BLOCK_EXT_DEVT is not set
# CONFIG_LKDTM is not set
# CONFIG_FAULT_INJECTION is not set
CONFIG_LATENCYTOP=y
CONFIG_SYSCTL_SYSCALL_CHECK=y
CONFIG_USER_STACKTRACE_SUPPORT=y
CONFIG_NOP_TRACER=y
CONFIG_HAVE_FUNCTION_TRACER=y
CONFIG_HAVE_FUNCTION_TRACE_MCOUNT_TEST=y
CONFIG_HAVE_DYNAMIC_FTRACE=y
CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
CONFIG_RING_BUFFER=y
CONFIG_TRACING=y
#
# Tracers
#
# CONFIG_FUNCTION_TRACER is not set
# CONFIG_IRQSOFF_TRACER is not set
# CONFIG_SYSPROF_TRACER is not set
# CONFIG_SCHED_TRACER is not set
CONFIG_CONTEXT_SWITCH_TRACER=y
# CONFIG_BOOT_TRACER is not set
# CONFIG_TRACE_BRANCH_PROFILING is not set
# CONFIG_STACK_TRACER is not set
# CONFIG_FTRACE_STARTUP_TEST is not set
# CONFIG_PROVIDE_OHCI1394_DMA_INIT is not set
# CONFIG_DYNAMIC_PRINTK_DEBUG is not set
# CONFIG_SAMPLES is not set
CONFIG_HAVE_ARCH_KGDB=y
CONFIG_KGDB=y
CONFIG_KGDB_SERIAL_CONSOLE=y
# CONFIG_KGDB_TESTS is not set
CONFIG_STRICT_DEVMEM=y
# CONFIG_X86_VERBOSE_BOOTUP is not set
CONFIG_EARLY_PRINTK=y
# CONFIG_EARLY_PRINTK_DBGP is not set
# CONFIG_DEBUG_STACKOVERFLOW is not set
# CONFIG_DEBUG_STACK_USAGE is not set
# CONFIG_DEBUG_PAGEALLOC is not set
# CONFIG_DEBUG_PER_CPU_MAPS is not set
# CONFIG_X86_PTDUMP is not set
CONFIG_DEBUG_RODATA=y
# CONFIG_DEBUG_RODATA_TEST is not set
# CONFIG_DEBUG_NX_TEST is not set
# CONFIG_IOMMU_DEBUG is not set
# CONFIG_MMIOTRACE is not set
CONFIG_IO_DELAY_TYPE_0X80=0
CONFIG_IO_DELAY_TYPE_0XED=1
CONFIG_IO_DELAY_TYPE_UDELAY=2
CONFIG_IO_DELAY_TYPE_NONE=3
# CONFIG_IO_DELAY_0X80 is not set
CONFIG_IO_DELAY_0XED=y
# CONFIG_IO_DELAY_UDELAY is not set
# CONFIG_IO_DELAY_NONE is not set
CONFIG_DEFAULT_IO_DELAY_TYPE=1
# CONFIG_KMEMCHECK is not set
# CONFIG_DEBUG_BOOT_PARAMS is not set
# CONFIG_CPA_DEBUG is not set
CONFIG_OPTIMIZE_INLINING=y
#
# Security options
#
CONFIG_KEYS=y
# CONFIG_KEYS_DEBUG_PROC_KEYS is not set
CONFIG_SECURITY=y
CONFIG_SECURITYFS=y
CONFIG_SECURITY_NETWORK=y
# CONFIG_SECURITY_NETWORK_XFRM is not set
CONFIG_SECURITY_FILE_CAPABILITIES=y
CONFIG_SECURITY_DEFAULT_MMAP_MIN_ADDR=0
CONFIG_SECURITY_SELINUX=y
CONFIG_SECURITY_SELINUX_BOOTPARAM=y
CONFIG_SECURITY_SELINUX_BOOTPARAM_VALUE=0
CONFIG_SECURITY_SELINUX_DISABLE=y
CONFIG_SECURITY_SELINUX_DEVELOP=y
CONFIG_SECURITY_SELINUX_AVC_STATS=y
CONFIG_SECURITY_SELINUX_CHECKREQPROT_VALUE=1
# CONFIG_SECURITY_SELINUX_ENABLE_SECMARK_DEFAULT is not set
# CONFIG_SECURITY_SELINUX_POLICYDB_VERSION_MAX is not set
CONFIG_SECURITY_SMACK=y
CONFIG_XOR_BLOCKS=m
CONFIG_ASYNC_CORE=m
CONFIG_ASYNC_MEMCPY=m
CONFIG_ASYNC_XOR=m
CONFIG_CRYPTO=y
#
# Crypto core or helper
#
# CONFIG_CRYPTO_FIPS is not set
CONFIG_CRYPTO_ALGAPI=y
CONFIG_CRYPTO_AEAD=y
CONFIG_CRYPTO_BLKCIPHER=y
CONFIG_CRYPTO_HASH=y
CONFIG_CRYPTO_RNG=y
CONFIG_CRYPTO_MANAGER=y
CONFIG_CRYPTO_GF128MUL=m
CONFIG_CRYPTO_NULL=m
CONFIG_CRYPTO_CRYPTD=m
CONFIG_CRYPTO_AUTHENC=m
CONFIG_CRYPTO_TEST=m
#
# Authenticated Encryption with Associated Data
#
CONFIG_CRYPTO_CCM=m
CONFIG_CRYPTO_GCM=m
CONFIG_CRYPTO_SEQIV=m
#
# Block modes
#
CONFIG_CRYPTO_CBC=m
CONFIG_CRYPTO_CTR=m
CONFIG_CRYPTO_CTS=m
CONFIG_CRYPTO_ECB=m
CONFIG_CRYPTO_LRW=m
CONFIG_CRYPTO_PCBC=m
CONFIG_CRYPTO_XTS=m
#
# Hash modes
#
CONFIG_CRYPTO_HMAC=y
CONFIG_CRYPTO_XCBC=m
#
# Digest
#
CONFIG_CRYPTO_CRC32C=m
# CONFIG_CRYPTO_CRC32C_INTEL is not set
CONFIG_CRYPTO_MD4=m
CONFIG_CRYPTO_MD5=y
CONFIG_CRYPTO_MICHAEL_MIC=m
CONFIG_CRYPTO_RMD128=m
CONFIG_CRYPTO_RMD160=m
CONFIG_CRYPTO_RMD256=m
CONFIG_CRYPTO_RMD320=m
CONFIG_CRYPTO_SHA1=m
CONFIG_CRYPTO_SHA256=m
CONFIG_CRYPTO_SHA512=m
CONFIG_CRYPTO_TGR192=m
CONFIG_CRYPTO_WP512=m
#
# Ciphers
#
CONFIG_CRYPTO_AES=m
CONFIG_CRYPTO_AES_X86_64=m
CONFIG_CRYPTO_ANUBIS=m
CONFIG_CRYPTO_ARC4=m
CONFIG_CRYPTO_BLOWFISH=m
CONFIG_CRYPTO_CAMELLIA=m
CONFIG_CRYPTO_CAST5=m
CONFIG_CRYPTO_CAST6=m
CONFIG_CRYPTO_DES=m
CONFIG_CRYPTO_FCRYPT=m
CONFIG_CRYPTO_KHAZAD=m
CONFIG_CRYPTO_SALSA20=m
CONFIG_CRYPTO_SALSA20_X86_64=m
CONFIG_CRYPTO_SEED=m
CONFIG_CRYPTO_SERPENT=m
CONFIG_CRYPTO_TEA=m
CONFIG_CRYPTO_TWOFISH=m
CONFIG_CRYPTO_TWOFISH_COMMON=m
CONFIG_CRYPTO_TWOFISH_X86_64=m
#
# Compression
#
CONFIG_CRYPTO_DEFLATE=m
CONFIG_CRYPTO_LZO=m
#
# Random Number Generation
#
# CONFIG_CRYPTO_ANSI_CPRNG is not set
CONFIG_CRYPTO_HW=y
CONFIG_CRYPTO_DEV_HIFN_795X=m
CONFIG_CRYPTO_DEV_HIFN_795X_RNG=y
CONFIG_HAVE_KVM=y
CONFIG_VIRTUALIZATION=y
CONFIG_KVM=m
CONFIG_KVM_INTEL=m
CONFIG_KVM_AMD=m
# CONFIG_KVM_TRACE is not set
CONFIG_VIRTIO=m
CONFIG_VIRTIO_RING=m
CONFIG_VIRTIO_PCI=m
CONFIG_VIRTIO_BALLOON=m
#
# Library routines
#
CONFIG_BITREVERSE=y
CONFIG_GENERIC_FIND_FIRST_BIT=y
CONFIG_GENERIC_FIND_NEXT_BIT=y
CONFIG_CRC_CCITT=m
CONFIG_CRC16=m
CONFIG_CRC_T10DIF=m
CONFIG_CRC_ITU_T=m
CONFIG_CRC32=y
CONFIG_CRC7=m
CONFIG_LIBCRC32C=m
CONFIG_ZLIB_INFLATE=y
CONFIG_ZLIB_DEFLATE=m
CONFIG_LZO_COMPRESS=m
CONFIG_LZO_DECOMPRESS=m
CONFIG_GENERIC_ALLOCATOR=y
CONFIG_REED_SOLOMON=m
CONFIG_REED_SOLOMON_DEC16=y
CONFIG_TEXTSEARCH=y
CONFIG_TEXTSEARCH_KMP=m
CONFIG_TEXTSEARCH_BM=m
CONFIG_TEXTSEARCH_FSM=m
CONFIG_PLIST=y
CONFIG_HAS_IOMEM=y
CONFIG_HAS_IOPORT=y
CONFIG_HAS_DMA=y
CONFIG_CHECK_SIGNATURE=y
[-- Attachment #4: Type: text/plain, Size: 138 bytes --]
_______________________________________________
Xen-devel mailing list
Xen-devel@lists.xensource.com
http://lists.xensource.com/xen-devel
^ permalink raw reply [flat|nested] 22+ messages in thread
* RE: pv_ops dom0 testing
2008-11-29 21:08 pv_ops dom0 testing Todd Deshane
@ 2008-11-29 21:38 ` Aviv Grafi
2008-11-29 22:16 ` Todd Deshane
0 siblings, 1 reply; 22+ messages in thread
From: Aviv Grafi @ 2008-11-29 21:38 UTC (permalink / raw)
To: deshantm, xen-devel mailing list
I had the same issue few days ago: try to boot the vmlinux (and not
vmlinuz) image that you can find in your kernel build directory.
You can verify that you are booting the right image file by using the
readelf tool.
-----Original Message-----
From: xen-devel-bounces@lists.xensource.com
[mailto:xen-devel-bounces@lists.xensource.com] On Behalf Of Todd Deshane
Sent: Saturday, November 29, 2008 11:09 PM
To: xen-devel mailing list
Subject: [Xen-devel] pv_ops dom0 testing
I am trying to get a pv_ops dom0 working for testing, but I am running
into an elf_init error:
(XEN) *** LOADING DOMAIN 0 ***
(XEN) elf_init: not an ELF binary
Full output attached.
>From what I have read on the mailing lists, it seems
that it is usually a problem with either grub or a corrupt dom0 kernel.
Attached is my kernel config (2.6.28-rc6-tip).
I followed the instructions on:
http://wiki.xensource.com/xenwiki/XenParavirtOps
Then I did make menuconfig and added:
XEN_DOM0
XEN_BLKDEV_BACKEND
here are the two grub entries I tried
title Xen 3.4-unstable / Ubuntu 8.10, kernel 2.6.28-rc6-tip
root (hd0,0)
kernel /boot/xen-3.4-unstable.gz loglvl=all guest_loglvl=all
dom0_max_vcpus=1 com1=115200,8n1 console=com1 noreboot dom0_mem=512M
module /boot/vmlinuz-2.6.28-rc6-tip root=/dev/sda1 ro
console=tty0
xencons=ttyS0,115200
module /boot/initrd.img-2.6.28-rc6-tip
title Xen 3.4-unstable / Ubuntu 8.10, kernel 2.6.28-rc6-tip
uuid 30596923-1435-4516-809d-ef8cd2958532
kernel /boot/xen-3.4-unstable.gz
module /boot/vmlinuz-2.6.28-rc6-tip
root=UUID=30596923-1435-4516-809d-ef8cd2958532 ro console=tty0
module /boot/initrd.img-2.6.28-rc6-tip
The error was reported by others (unanswered), but they might be
unrelated:
http://xen.markmail.org/message/grqiejrlax6tyutn?q=elf_init
http://xen.markmail.org/message/r5y32q5yyuv4okgj?q=elf_init
Any suggestions on what went wrong and/or what else to try?
Cheers,
Todd
--
Todd Deshane
http://todddeshane.net
http://runningxen.com
^ permalink raw reply [flat|nested] 22+ messages in thread
* Re: pv_ops dom0 testing
2008-11-29 21:38 ` Aviv Grafi
@ 2008-11-29 22:16 ` Todd Deshane
2008-11-29 22:32 ` Aviv Grafi
0 siblings, 1 reply; 22+ messages in thread
From: Todd Deshane @ 2008-11-29 22:16 UTC (permalink / raw)
To: xen-devel mailing list; +Cc: Aviv Grafi
[-- Attachment #1: Type: text/plain, Size: 1081 bytes --]
On Sat, Nov 29, 2008 at 4:38 PM, Aviv Grafi <aviv@neocleus.com> wrote:
> I had the same issue few days ago: try to boot the vmlinux (and not
> vmlinuz) image that you can find in your kernel build directory.
> You can verify that you are booting the right image file by using the
> readelf tool.
>
Thanks for the tip Aviv. That got me a little farther.
The debug output now ends with:
(XEN) ioapic_guest_write: apic=0, pin=4, old_irq=4, new_irq=4
(XEN) ioapic_guest_write: old_entry=000009f1, new_entry=000189f1
(XEN) ioapic_guest_write: Attempt to modify IO-APIC pin for in-use IRQ!
Full output attached.
Do I need to either modify more of the default kernel settings or pass
some more options to Xen or the dom0 kernel?
When running non-debug mode, I don't see any dom0 output on the screen,.
I tried a few different console= lines
tty0, xvc0, hvc0.... but only Xen hypervisor output ending with:
(XEN) Xen is relinquishing VGA console
Can someone post a working .config and grub config and/or the
instructions to get to that point beyond the default setup?
Cheers,
Todd
[-- Attachment #2: xenboot.out2 --]
[-- Type: application/octet-stream, Size: 7307 bytes --]
__ __ _____ _ _ _ _ _
\ \/ /___ _ __ |___ /| || | _ _ _ __ ___| |_ __ _| |__ | | ___
\ // _ \ '_ \ |_ \| || |_ __| | | | '_ \/ __| __/ _` | '_ \| |/ _ \
/ \ __/ | | | ___) |__ _|__| |_| | | | \__ \ || (_| | |_) | | __/
/_/\_\___|_| |_| |____(_) |_| \__,_|_| |_|___/\__\__,_|_.__/|_|\___|
(XEN) Xen version 3.4-unstable (deshantm@) (gcc version 4.2.4 (Ubuntu 4.2.4-3ubuntu4)) Wed Nov 26 16:27:34 EST 2008
(XEN) Latest ChangeSet: Wed Nov 19 19:13:22 2008 +0000 18796:98d48f7680db
(XEN) Command line: loglvl=all guest_loglvl=all dom0_max_vcpus=1 com1=115200,8n1 console=com1 noreboot dom0_mem=512M
(XEN) Video information:
(XEN) VGA is text mode 80x25, font 8x16
(XEN) VBE/DDC methods: V2; EDID transfer time: 1 seconds
(XEN) Disc information:
(XEN) Found 2 MBR signatures
(XEN) Found 2 EDD information structures
(XEN) Xen-e820 RAM map:
(XEN) 0000000000000000 - 000000000009fc00 (usable)
(XEN) 00000000000f0000 - 0000000000100000 (reserved)
(XEN) 0000000000100000 - 00000000cfdffc00 (usable)
(XEN) 00000000cfdffc00 - 00000000cfe01c00 (ACPI NVS)
(XEN) 00000000cfe03c00 - 00000000cfe53c00 (reserved)
(XEN) 00000000cfe53c00 - 00000000cfe55c00 (ACPI data)
(XEN) 00000000cfe55c00 - 00000000d0000000 (reserved)
(XEN) 00000000e0000000 - 00000000f0000000 (reserved)
(XEN) 00000000fec00000 - 00000000fed00400 (reserved)
(XEN) 00000000fed20000 - 00000000feda0000 (reserved)
(XEN) 00000000fee00000 - 00000000fef00000 (reserved)
(XEN) 00000000ffb00000 - 0000000100000000 (reserved)
(XEN) 0000000100000000 - 000000012c000000 (usable)
(XEN) System RAM: 4029MB (4126328kB)
(XEN) ACPI: RSDP 000FEBF0, 0024 (r2 DELL )
(XEN) ACPI: XSDT 000FCE97, 0084 (r1 DELL B8K 15 ASL 61)
(XEN) ACPI: FACP 000FCFBF, 00F4 (r3 DELL B8K 15 ASL 61)
(XEN) ACPI: DSDT FFF68960, 475F (r1 DELL dt_ex 1000 INTL 20050624)
(XEN) ACPI: FACS CFDFFC00, 0040
(XEN) ACPI: SSDT FFF6D397, 009A (r1 DELL st_ex 1000 INTL 20050624)
(XEN) ACPI: APIC 000FD0B3, 0092 (r1 DELL B8K 15 ASL 61)
(XEN) ACPI: BOOT 000FD145, 0028 (r1 DELL B8K 15 ASL 61)
(XEN) ACPI: ASF! 000FD16D, 0092 (r32 DELL B8K 15 ASL 61)
(XEN) ACPI: MCFG 000FD1FF, 003E (r1 DELL B8K 15 ASL 61)
(XEN) ACPI: HPET 000FD23D, 0038 (r1 DELL B8K 15 ASL 61)
(XEN) ACPI: TCPA 000FD499, 0032 (r1 DELL B8K 15 ASL 61)
(XEN) ACPI: SLIC 000FD275, 0176 (r1 DELL B8K 15 ASL 61)
(XEN) ACPI: SSDT CFDFFC40, 01F9 (r1 DpgPmm Cpu0Ist 11 INTL 20050624)
(XEN) ACPI: SSDT CFE00049, 01F9 (r1 DpgPmm Cpu1Ist 11 INTL 20050624)
(XEN) ACPI: SSDT CFE00452, 0140 (r1 DpgPmm CpuPm 10 INTL 20050624)
(XEN) NUMA turned off
(XEN) Faking a node at 0000000000000000-000000012c000000
(XEN) Xen heap: 14MB (14612kB)
(XEN) Domain heap initialised
(XEN) found SMP MP-table at 000fe710
(XEN) DMI 2.3 present.
(XEN) Using APIC driver default
(XEN) ACPI: PM-Timer IO Port: 0x808
(XEN) ACPI: ACPI SLEEP INFO: pm1x_cnt[804,0], pm1x_evt[800,0]
(XEN) ACPI: wakeup_vec[cfdffc0c], vec_size[20]
(XEN) ACPI: Local APIC address 0xfee00000
(XEN) ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
(XEN) Processor #0 6:15 APIC version 20
(XEN) ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled)
(XEN) Processor #1 6:15 APIC version 20
(XEN) ACPI: LAPIC (acpi_id[0x03] lapic_id[0x05] disabled)
(XEN) ACPI: LAPIC (acpi_id[0x04] lapic_id[0x07] disabled)
(XEN) ACPI: LAPIC (acpi_id[0x05] lapic_id[0x00] disabled)
(XEN) ACPI: LAPIC (acpi_id[0x06] lapic_id[0x01] disabled)
(XEN) ACPI: LAPIC (acpi_id[0x07] lapic_id[0x02] disabled)
(XEN) ACPI: LAPIC (acpi_id[0x08] lapic_id[0x03] disabled)
(XEN) ACPI: LAPIC_NMI (acpi_id[0xff] high level lint[0x1])
(XEN) ACPI: IOAPIC (id[0x08] address[0xfec00000] gsi_base[0])
(XEN) IOAPIC[0]: apic_id 8, version 32, address 0xfec00000, GSI 0-23
(XEN) ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
(XEN) ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
(XEN) ACPI: IRQ0 used by override.
(XEN) ACPI: IRQ2 used by override.
(XEN) ACPI: IRQ9 used by override.
(XEN) Enabling APIC mode: Flat. Using 1 I/O APICs
(XEN) ACPI: HPET id: 0x8086a201 base: 0xfed00000
(XEN) Using ACPI (MADT) for SMP configuration information
(XEN) Using scheduler: SMP Credit Scheduler (credit)
(XEN) Initializing CPU#0
(XEN) Detected 2394.090 MHz processor.
(XEN) CPU: L1 I cache: 32K, L1 D cache: 32K
(XEN) CPU: L2 cache: 4096K
(XEN) CPU: Physical Processor ID: 0
(XEN) CPU: Processor Core ID: 0
(XEN) HVM: VMX enabled
(XEN) CPU0: Intel(R) Core(TM)2 CPU 6600 @ 2.40GHz stepping 06
(XEN) Booting processor 1/1 eip 8c000
(XEN) Initializing CPU#1
(XEN) CPU: L1 I cache: 32K, L1 D cache: 32K
(XEN) CPU: L2 cache: 4096K
(XEN) CPU: Physical Processor ID: 0
(XEN) CPU: Processor Core ID: 1
(XEN) CPU1: Intel(R) Core(TM)2 CPU 6600 @ 2.40GHz stepping 06
(XEN) Total of 2 processors activated.
(XEN) ENABLING IO-APIC IRQs
(XEN) -> Using new ACK method
(XEN) ..TIMER: vector=0xF0 apic1=0 pin1=2 apic2=-1 pin2=-1
(XEN) checking TSC synchronization across 2 CPUs: passed.
(XEN) Platform timer is 14.318MHz HPET
(XEN) Brought up 2 CPUs
(XEN) I/O virtualisation disabled
(XEN) ACPI sleep modes: S3
(XEN) MCA: Machine check polling timer started.
(XEN) *** LOADING DOMAIN 0 ***
(XEN) Xen kernel: 64-bit, lsb, compat32
(XEN) Dom0 kernel: 64-bit, PAE, lsb, paddr 0x200000 -> 0x8defbc
(XEN) PHYSICAL MEMORY ARRANGEMENT:
(XEN) Dom0 alloc.: 0000000110000000->0000000120000000 (65536 pages to be allocated)
(XEN) VIRTUAL MEMORY ARRANGEMENT:
(XEN) Loaded kernel: ffffffff80200000->ffffffff808defbc
(XEN) Init. ramdisk: ffffffff808df000->ffffffff8c467a00
(XEN) Phys-Mach map: ffffffff8c468000->ffffffff8c568000
(XEN) Start info: ffffffff8c568000->ffffffff8c5684a4
(XEN) Page tables: ffffffff8c569000->ffffffff8c5d0000
(XEN) Boot stack: ffffffff8c5d0000->ffffffff8c5d1000
(XEN) TOTAL: ffffffff80000000->ffffffff8c800000
(XEN) ENTRY ADDRESS: ffffffff8072a200
(XEN) Dom0 has maximum 1 VCPUs
(XEN) Scrubbing Free RAM: ...................................done.
(XEN) Xen trace buffers: disabled
(XEN) Std. Loglevel: All
(XEN) Guest Loglevel: All
(XEN) *** Serial input -> DOM0 (type 'CTRL-a' three times to switch input to Xen)
(XEN) Freed 108kB init memory.
mapping kernel into physical memory
Xen: setup ISA identity maps
about to get started...
(XEN) io_apic.c:2203:
(XEN) ioapic_guest_write: apic=0, pin=2, old_irq=0, new_irq=-1
(XEN) ioapic_guest_write: old_entry=000009f0, new_entry=00010900
(XEN) ioapic_guest_write: Attempt to remove IO-APIC pin of in-use IRQ!
(XEN) io_apic.c:2203:
(XEN) ioapic_guest_write: apic=0, pin=4, old_irq=4, new_irq=-1
(XEN) ioapic_guest_write: old_entry=000009f1, new_entry=00010900
(XEN) ioapic_guest_write: Attempt to remove IO-APIC pin of in-use IRQ!
(XEN) io_apic.c:2216:
(XEN) ioapic_guest_write: apic=0, pin=4, old_irq=4, new_irq=4
(XEN) ioapic_guest_write: old_entry=000009f1, new_entry=000189f1
(XEN) ioapic_guest_write: Attempt to modify IO-APIC pin for in-use IRQ!
(XEN) *** Serial input -> Xen (type 'CTRL-a' three times to switch input to DOM0)
[-- Attachment #3: Type: text/plain, Size: 138 bytes --]
_______________________________________________
Xen-devel mailing list
Xen-devel@lists.xensource.com
http://lists.xensource.com/xen-devel
^ permalink raw reply [flat|nested] 22+ messages in thread
* RE: pv_ops dom0 testing
2008-11-29 22:16 ` Todd Deshane
@ 2008-11-29 22:32 ` Aviv Grafi
2008-11-29 23:05 ` Todd Deshane
0 siblings, 1 reply; 22+ messages in thread
From: Aviv Grafi @ 2008-11-29 22:32 UTC (permalink / raw)
To: deshantm; +Cc: xen-devel mailing list
I solved this one by adding "console=hvc0 earlyprintk=xen" to the dom0
kernel boot line (thanks to Jeremy Fitzhardinge [jeremy@goop.org]).
-----Original Message-----
From: Todd Deshane [mailto:deshantm@gmail.com]
Sent: Sunday, November 30, 2008 12:16 AM
To: xen-devel mailing list
Cc: Aviv Grafi
Subject: Re: [Xen-devel] pv_ops dom0 testing
On Sat, Nov 29, 2008 at 4:38 PM, Aviv Grafi <aviv@neocleus.com> wrote:
> I had the same issue few days ago: try to boot the vmlinux (and not
> vmlinuz) image that you can find in your kernel build directory.
> You can verify that you are booting the right image file by using the
> readelf tool.
>
Thanks for the tip Aviv. That got me a little farther.
The debug output now ends with:
(XEN) ioapic_guest_write: apic=0, pin=4, old_irq=4, new_irq=4
(XEN) ioapic_guest_write: old_entry=000009f1, new_entry=000189f1
(XEN) ioapic_guest_write: Attempt to modify IO-APIC pin for in-use IRQ!
Full output attached.
Do I need to either modify more of the default kernel settings or pass
some more options to Xen or the dom0 kernel?
When running non-debug mode, I don't see any dom0 output on the screen,.
I tried a few different console= lines
tty0, xvc0, hvc0.... but only Xen hypervisor output ending with:
(XEN) Xen is relinquishing VGA console
Can someone post a working .config and grub config and/or the
instructions to get to that point beyond the default setup?
Cheers,
Todd
^ permalink raw reply [flat|nested] 22+ messages in thread
* Re: pv_ops dom0 testing
2008-11-29 22:32 ` Aviv Grafi
@ 2008-11-29 23:05 ` Todd Deshane
2008-12-01 23:19 ` Jeremy Fitzhardinge
0 siblings, 1 reply; 22+ messages in thread
From: Todd Deshane @ 2008-11-29 23:05 UTC (permalink / raw)
To: xen-devel mailing list; +Cc: Aviv Grafi
[-- Attachment #1: Type: text/plain, Size: 2013 bytes --]
On Sat, Nov 29, 2008 at 5:32 PM, Aviv Grafi <aviv@neocleus.com> wrote:
> I solved this one by adding "console=hvc0 earlyprintk=xen" to the dom0
> kernel boot line (thanks to Jeremy Fitzhardinge [jeremy@goop.org]).
Thanks again Aviv. I am really close now. The screen still shows nothing,
but the debug output has the dom0 kernel boot.
(Not sure why that would be... any thoughts?)
In the debug output however I successfully get to the the
(initramfs) prompt.
Full output attached, but some interesting parts inline:
(initramfs)cat /proc/cmdline
root=/dev/sda1 ro console=tty0 xencons=ttyS0,115200 console=hvc0 earlyprintk=xen
(initramfs) cat /proc/modules
ata_piix 33586 1 - Loading 0xffffffffa0127000
libata 196576 1 ata_piix, Live 0xffffffffa00f5000
scsi_mod 184792 1 libata, Live 0xffffffffa00c5000
r8169 46084 0 - Live 0xffffffffa00b7000
mii 14464 1 r8169, Live 0xffffffffa00b1000
tg3 139396 0 - Live 0xffffffffa008c000
libphy 32896 1 tg3, Live 0xffffffffa007e000
ehci_hcd 46726 1 - Loading 0xffffffffa0070000
uhci_hcd 34037 1 - Loading 0xffffffffa0062000
usbcore 174512 3 ehci_hcd,uhci_hcd, Live 0xffffffffa0035000
thermal 27552 0 - Live 0xffffffffa002c000
processor 55224 1 thermal, Live 0xffffffffa0019000
fan 13832 0 - Live 0xffffffffa0013000
fuse 65728 1 - Live 0xffffffffa0000000
a listing of /dev doesn't show any sd* devices.
So I am guessing I am running into a driver issue at this
point. I will dig around more and compare my working
vanilla linux config with the dom0 kernel to see if there
is something missing in my dom0 kernel.
Thanks for the help so far and if anything comes to mind
why I don't see console output on the screen (and only in
the debug output) that would be helpful to me.
I'll report back on progress.
If there are any obvious known workarounds, problems, bugs etc.
let me know. I know that the pv_ops dom0 kernel is very much in
development, but I am willing to try to work through that.
Cheers,
Todd
--
Todd Deshane
http://todddeshane.net
http://runningxen.com
[-- Attachment #2: xenboot.out3 --]
[-- Type: application/octet-stream, Size: 60285 bytes --]
__ __ _____ _ _ _ _ _
\ \/ /___ _ __ |___ /| || | _ _ _ __ ___| |_ __ _| |__ | | ___
\ // _ \ '_ \ |_ \| || |_ __| | | | '_ \/ __| __/ _` | '_ \| |/ _ \
/ \ __/ | | | ___) |__ _|__| |_| | | | \__ \ || (_| | |_) | | __/
/_/\_\___|_| |_| |____(_) |_| \__,_|_| |_|___/\__\__,_|_.__/|_|\___|
(XEN) Xen version 3.4-unstable (deshantm@) (gcc version 4.2.4 (Ubuntu 4.2.4-3ubuntu4)) Wed Nov 26 16:27:34 EST 2008
(XEN) Latest ChangeSet: Wed Nov 19 19:13:22 2008 +0000 18796:98d48f7680db
(XEN) Command line: loglvl=all guest_loglvl=all dom0_max_vcpus=1 com1=115200,8n1 console=com1 noreboot dom0_mem=512M
(XEN) Video information:
(XEN) VGA is text mode 80x25, font 8x16
(XEN) VBE/DDC methods: V2; EDID transfer time: 1 seconds
(XEN) Disc information:
(XEN) Found 2 MBR signatures
(XEN) Found 2 EDD information structures
(XEN) Xen-e820 RAM map:
(XEN) 0000000000000000 - 000000000009fc00 (usable)
(XEN) 00000000000f0000 - 0000000000100000 (reserved)
(XEN) 0000000000100000 - 00000000cfdffc00 (usable)
(XEN) 00000000cfdffc00 - 00000000cfe01c00 (ACPI NVS)
(XEN) 00000000cfe03c00 - 00000000cfe53c00 (reserved)
(XEN) 00000000cfe53c00 - 00000000cfe55c00 (ACPI data)
(XEN) 00000000cfe55c00 - 00000000d0000000 (reserved)
(XEN) 00000000e0000000 - 00000000f0000000 (reserved)
(XEN) 00000000fec00000 - 00000000fed00400 (reserved)
(XEN) 00000000fed20000 - 00000000feda0000 (reserved)
(XEN) 00000000fee00000 - 00000000fef00000 (reserved)
(XEN) 00000000ffb00000 - 0000000100000000 (reserved)
(XEN) 0000000100000000 - 000000012c000000 (usable)
(XEN) System RAM: 4029MB (4126328kB)
(XEN) ACPI: RSDP 000FEBF0, 0024 (r2 DELL )
(XEN) ACPI: XSDT 000FCE97, 0084 (r1 DELL B8K 15 ASL 61)
(XEN) ACPI: FACP 000FCFBF, 00F4 (r3 DELL B8K 15 ASL 61)
(XEN) ACPI: DSDT FFF68960, 475F (r1 DELL dt_ex 1000 INTL 20050624)
(XEN) ACPI: FACS CFDFFC00, 0040
(XEN) ACPI: SSDT FFF6D397, 009A (r1 DELL st_ex 1000 INTL 20050624)
(XEN) ACPI: APIC 000FD0B3, 0092 (r1 DELL B8K 15 ASL 61)
(XEN) ACPI: BOOT 000FD145, 0028 (r1 DELL B8K 15 ASL 61)
(XEN) ACPI: ASF! 000FD16D, 0092 (r32 DELL B8K 15 ASL 61)
(XEN) ACPI: MCFG 000FD1FF, 003E (r1 DELL B8K 15 ASL 61)
(XEN) ACPI: HPET 000FD23D, 0038 (r1 DELL B8K 15 ASL 61)
(XEN) ACPI: TCPA 000FD499, 0032 (r1 DELL B8K 15 ASL 61)
(XEN) ACPI: SLIC 000FD275, 0176 (r1 DELL B8K 15 ASL 61)
(XEN) ACPI: SSDT CFDFFC40, 01F9 (r1 DpgPmm Cpu0Ist 11 INTL 20050624)
(XEN) ACPI: SSDT CFE00049, 01F9 (r1 DpgPmm Cpu1Ist 11 INTL 20050624)
(XEN) ACPI: SSDT CFE00452, 0140 (r1 DpgPmm CpuPm 10 INTL 20050624)
(XEN) NUMA turned off
(XEN) Faking a node at 0000000000000000-000000012c000000
(XEN) Xen heap: 14MB (14612kB)
(XEN) Domain heap initialised
(XEN) found SMP MP-table at 000fe710
(XEN) DMI 2.3 present.
(XEN) Using APIC driver default
(XEN) ACPI: PM-Timer IO Port: 0x808
(XEN) ACPI: ACPI SLEEP INFO: pm1x_cnt[804,0], pm1x_evt[800,0]
(XEN) ACPI: wakeup_vec[cfdffc0c], vec_size[20]
(XEN) ACPI: Local APIC address 0xfee00000
(XEN) ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
(XEN) Processor #0 6:15 APIC version 20
(XEN) ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled)
(XEN) Processor #1 6:15 APIC version 20
(XEN) ACPI: LAPIC (acpi_id[0x03] lapic_id[0x05] disabled)
(XEN) ACPI: LAPIC (acpi_id[0x04] lapic_id[0x07] disabled)
(XEN) ACPI: LAPIC (acpi_id[0x05] lapic_id[0x00] disabled)
(XEN) ACPI: LAPIC (acpi_id[0x06] lapic_id[0x01] disabled)
(XEN) ACPI: LAPIC (acpi_id[0x07] lapic_id[0x02] disabled)
(XEN) ACPI: LAPIC (acpi_id[0x08] lapic_id[0x03] disabled)
(XEN) ACPI: LAPIC_NMI (acpi_id[0xff] high level lint[0x1])
(XEN) ACPI: IOAPIC (id[0x08] address[0xfec00000] gsi_base[0])
(XEN) IOAPIC[0]: apic_id 8, version 32, address 0xfec00000, GSI 0-23
(XEN) ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
(XEN) ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
(XEN) ACPI: IRQ0 used by override.
(XEN) ACPI: IRQ2 used by override.
(XEN) ACPI: IRQ9 used by override.
(XEN) Enabling APIC mode: Flat. Using 1 I/O APICs
(XEN) ACPI: HPET id: 0x8086a201 base: 0xfed00000
(XEN) Using ACPI (MADT) for SMP configuration information
(XEN) Using scheduler: SMP Credit Scheduler (credit)
(XEN) Initializing CPU#0
(XEN) Detected 2394.083 MHz processor.
(XEN) CPU: L1 I cache: 32K, L1 D cache: 32K
(XEN) CPU: L2 cache: 4096K
(XEN) CPU: Physical Processor ID: 0
(XEN) CPU: Processor Core ID: 0
(XEN) HVM: VMX enabled
(XEN) CPU0: Intel(R) Core(TM)2 CPU 6600 @ 2.40GHz stepping 06
(XEN) Booting processor 1/1 eip 8c000
(XEN) Initializing CPU#1
(XEN) CPU: L1 I cache: 32K, L1 D cache: 32K
(XEN) CPU: L2 cache: 4096K
(XEN) CPU: Physical Processor ID: 0
(XEN) CPU: Processor Core ID: 1
(XEN) CPU1: Intel(R) Core(TM)2 CPU 6600 @ 2.40GHz stepping 06
(XEN) Total of 2 processors activated.
(XEN) ENABLING IO-APIC IRQs
(XEN) -> Using new ACK method
(XEN) ..TIMER: vector=0xF0 apic1=0 pin1=2 apic2=-1 pin2=-1
(XEN) checking TSC synchronization across 2 CPUs: passed.
(XEN) Platform timer is 14.318MHz HPET
(XEN) Brought up 2 CPUs
(XEN) I/O virtualisation disabled
(XEN) ACPI sleep modes: S3
(XEN) MCA: Machine check polling timer started.
(XEN) *** LOADING DOMAIN 0 ***
(XEN) Xen kernel: 64-bit, lsb, compat32
(XEN) Dom0 kernel: 64-bit, PAE, lsb, paddr 0x200000 -> 0x8defbc
(XEN) PHYSICAL MEMORY ARRANGEMENT:
(XEN) Dom0 alloc.: 0000000110000000->0000000120000000 (65536 pages to be allocated)
(XEN) VIRTUAL MEMORY ARRANGEMENT:
(XEN) Loaded kernel: ffffffff80200000->ffffffff808defbc
(XEN) Init. ramdisk: ffffffff808df000->ffffffff8c467a00
(XEN) Phys-Mach map: ffffffff8c468000->ffffffff8c568000
(XEN) Start info: ffffffff8c568000->ffffffff8c5684a4
(XEN) Page tables: ffffffff8c569000->ffffffff8c5d0000
(XEN) Boot stack: ffffffff8c5d0000->ffffffff8c5d1000
(XEN) TOTAL: ffffffff80000000->ffffffff8c800000
(XEN) ENTRY ADDRESS: ffffffff8072a200
(XEN) Dom0 has maximum 1 VCPUs
(XEN) Scrubbing Free RAM: ...................................done.
(XEN) Xen trace buffers: disabled
(XEN) Std. Loglevel: All
(XEN) Guest Loglevel: All
(XEN) *** Serial input -> DOM0 (type 'CTRL-a' three times to switch input to Xen)
(XEN) Freed 108kB init memory.
mapping kernel into physical memory
Xen: setup ISA identity maps
about to get started...
[ 0.000000] Initializing cgroup subsys cpuset
[ 0.000000] Initializing cgroup subsys cpu
[ 0.000000] Linux version 2.6.28-rc6-tip (deshantm@xen-kvm) (gcc version 4.2.4 (Ubuntu 4.2.4-3ubuntu4)) #1 SMP Fri Nov 28 14:56:45 EST 2008
[ 0.000000] Command line: root=/dev/sda1 ro console=tty0 xencons=ttyS0,115200 console=hvc0 earlyprintk=xen
[ 0.000000] KERNEL supported cpus:
[ 0.000000] Intel GenuineIntel
[ 0.000000] AMD AuthenticAMD
[ 0.000000] Centaur CentaurHauls
[ 0.000000] BIOS-provided physical RAM map:
[ 0.000000] Xen: 0000000000000000 - 00000000000a0000 (usable)
[ 0.000000] Xen: 00000000000a0000 - 0000000000100000 (reserved)
[ 0.000000] Xen: 0000000000100000 - 000000000c468000 (usable)
[ 0.000000] Xen: 000000000c468000 - 000000000c569000 (reserved)
[ 0.000000] Xen: 000000000c569000 - 0000000020000000 (usable)
[ 0.000000] console [xenboot0] enabled
[ 0.000000] DMI 2.3 present.
[ 0.000000] last_pfn = 0x20000 max_arch_pfn = 0x3ffffffff
[ 0.000000] init_memory_mapping: 0000000000000000-0000000020000000
[ 0.000000] last_map_addr: 20000000 end: 20000000
[ 0.000000] RAMDISK: 008df000 - 0c467a00
[ 0.000000] ACPI: RSDP 000FEBF0, 0024 (r2 DELL )
[ 0.000000] ACPI: XSDT 000FCE97, 0084 (r1 DELL B8K 15 ASL 61)
[ 0.000000] ACPI: FACP 000FCFBF, 00F4 (r3 DELL B8K 15 ASL 61)
[ 0.000000] ACPI: DSDT FFF68960, 475F (r1 DELL dt_ex 1000 INTL 20050624)
[ 0.000000] ACPI: FACS CFDFFC00, 0040
[ 0.000000] ACPI: SSDT FFF6D397, 009A (r1 DELL st_ex 1000 INTL 20050624)
[ 0.000000] ACPI: APIC 000FD0B3, 0092 (r1 DELL B8K 15 ASL 61)
[ 0.000000] ACPI: BOOT 000FD145, 0028 (r1 DELL B8K 15 ASL 61)
[ 0.000000] ACPI: ASF! 000FD16D, 0092 (r32 DELL B8K 15 ASL 61)
[ 0.000000] ACPI: MCFG 000FD1FF, 003E (r1 DELL B8K 15 ASL 61)
[ 0.000000] ACPI: HPET 000FD23D, 0038 (r1 DELL B8K 15 ASL 61)
[ 0.000000] ACPI: TCPA 000FD499, 0032 (r1 DELL B8K 15 ASL 61)
[ 0.000000] ACPI: SLIC 000FD275, 0176 (r1 DELL B8K 15 ASL 61)
[ 0.000000] ACPI: SSDT CFDFFC40, 01F9 (r1 DpgPmm Cpu0Ist 11 INTL 20050624)
[ 0.000000] ACPI: SSDT CFE00049, 01F9 (r1 DpgPmm Cpu1Ist 11 INTL 20050624)
[ 0.000000] ACPI: SSDT CFE00452, 0140 (r1 DpgPmm CpuPm 10 INTL 20050624)
[ 0.000000] No NUMA configuration found
[ 0.000000] Faking a node at 0000000000000000-0000000020000000
[ 0.000000] Bootmem setup node 0 0000000000000000-0000000020000000
[ 0.000000] NODE_DATA [0000000000001000 - 0000000000005fff]
[ 0.000000] bootmap [0000000000008000 - 000000000000bfff] pages 4
[ 0.000000] (6 early reservations) ==> bootmem [0000000000 - 0020000000]
[ 0.000000] #0 [0000000000 - 0000001000] BIOS data page ==> [0000000000 - 0000001000]
[ 0.000000] #1 [0000006000 - 0000008000] TRAMPOLINE ==> [0000006000 - 0000008000]
[ 0.000000] #2 [000c569000 - 000c5d0000] XEN PAGETABLES ==> [000c569000 - 000c5d0000]
[ 0.000000] #3 [0000200000 - 00008defbc] TEXT DATA BSS ==> [0000200000 - 00008defbc]
[ 0.000000] #4 [00008df000 - 000c467a00] RAMDISK ==> [00008df000 - 000c467a00]
[ 0.000000] #5 [000c5d0000 - 000c668000] PGTABLE ==> [000c5d0000 - 000c668000]
[ 0.000000] found SMP MP-table at [ffff8800000fe710] 000fe710
[ 0.000000] Zone PFN ranges:
[ 0.000000] DMA 0x00000000 -> 0x00001000
[ 0.000000] DMA32 0x00001000 -> 0x00100000
[ 0.000000] Normal 0x00100000 -> 0x00100000
[ 0.000000] Movable zone start PFN for each node
[ 0.000000] early_node_map[3] active PFN ranges
[ 0.000000] 0: 0x00000000 -> 0x000000a0
[ 0.000000] 0: 0x00000100 -> 0x0000c468
[ 0.000000] 0: 0x0000c569 -> 0x00020000
[ 0.000000] ACPI: PM-Timer IO Port: 0x808
[ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x05] disabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x04] lapic_id[0x07] disabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x05] lapic_id[0x00] disabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x06] lapic_id[0x01] disabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x07] lapic_id[0x02] disabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x08] lapic_id[0x03] disabled)
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0xff] high level lint[0x1])
[ 0.000000] ACPI: IOAPIC (id[0x08] address[0xfec00000] gsi_base[0])
[ 0.000000] IOAPIC[0]: apic_id 8, version 0, address 0xfec00000, GSI 0-23
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[ 0.000000] ACPI: HPET id: 0x8086a201 base: 0xfed00000
[ 0.000000] Using ACPI (MADT) for SMP configuration information
[ 0.000000] SMP: Allowing 1 CPUs, 0 hotplug CPUs
(XEN) io_apic.c:2203:
(XEN) ioapic_guest_write: apic=0, pin=2, old_irq=0, new_irq=-1
(XEN) ioapic_guest_write: old_entry=000009f0, new_entry=00010900
(XEN) ioapic_guest_write: Attempt to remove IO-APIC pin of in-use IRQ!
(XEN) io_apic.c:2203:
(XEN) ioapic_guest_write: apic=0, pin=4, old_irq=4, new_irq=-1
(XEN) ioapic_guest_write: old_entry=000009f1, new_entry=00010900
(XEN) ioapic_guest_write: Attempt to remove IO-APIC pin of in-use IRQ!
[ 0.000000] PM: Registered nosave memory: 00000000000a0000 - 0000000000100000
[ 0.000000] PM: Registered nosave memory: 000000000c468000 - 000000000c569000
[ 0.000000] Allocating PCI resources starting at 30000000 (gap: 20000000:e0000000)
[ 0.000000] PERCPU: Allocating 69632 bytes of per cpu data
[ 0.000000] Built 1 zonelists in Node order, mobility grouping on. Total pages: 127164
[ 0.000000] Policy zone: DMA32
[ 0.000000] Kernel command line: root=/dev/sda1 ro console=tty0 xencons=ttyS0,115200 console=hvc0 earlyprintk=xen
[ 0.000000] Initializing CPU#0
[ 0.000000] xen: allocated irq 9 for acpi 9
[ 0.000000] PID hash table entries: 2048 (order: 11, 16384 bytes)
[ 0.000000] Detected 2394.014 MHz processor.
[ 0.004000] Console: colour dummy device 80x25
[ 0.004000] console [tty0] enabled
[ 0.000000] Initializing cgroup subsys cpuset
[ 0.000000] Initializing cgroup subsys cpu
[ 0.000000] Linux version 2.6.28-rc6-tip (deshantm@xen-kvm) (gcc version 4.2.4 (Ubuntu 4.2.4-3ubuntu4)) #1 SMP Fri Nov 28 14:56:45 EST 2008
[ 0.000000] Command line: root=/dev/sda1 ro console=tty0 xencons=ttyS0,115200 console=hvc0 earlyprintk=xen
[ 0.000000] KERNEL supported cpus:
[ 0.000000] Intel GenuineIntel
[ 0.000000] AMD AuthenticAMD
[ 0.000000] Centaur CentaurHauls
[ 0.000000] BIOS-provided physical RAM map:
[ 0.000000] Xen: 0000000000000000 - 00000000000a0000 (usable)
[ 0.000000] Xen: 00000000000a0000 - 0000000000100000 (reserved)
[ 0.000000] Xen: 0000000000100000 - 000000000c468000 (usable)
[ 0.000000] Xen: 000000000c468000 - 000000000c569000 (reserved)
[ 0.000000] Xen: 000000000c569000 - 0000000020000000 (usable)
[ 0.000000] console [xenboot0] enabled
[ 0.000000] DMI 2.3 present.
[ 0.000000] last_pfn = 0x20000 max_arch_pfn = 0x3ffffffff
[ 0.000000] init_memory_mapping: 0000000000000000-0000000020000000
[ 0.000000] last_map_addr: 20000000 end: 20000000
[ 0.000000] RAMDISK: 008df000 - 0c467a00
[ 0.000000] ACPI: RSDP 000FEBF0, 0024 (r2 DELL )
[ 0.000000] ACPI: XSDT 000FCE97, 0084 (r1 DELL B8K 15 ASL 61)
[ 0.000000] ACPI: FACP 000FCFBF, 00F4 (r3 DELL B8K 15 ASL 61)
[ 0.000000] ACPI: DSDT FFF68960, 475F (r1 DELL dt_ex 1000 INTL 20050624)
[ 0.000000] ACPI: FACS CFDFFC00, 0040
[ 0.000000] ACPI: SSDT FFF6D397, 009A (r1 DELL st_ex 1000 INTL 20050624)
[ 0.000000] ACPI: APIC 000FD0B3, 0092 (r1 DELL B8K 15 ASL 61)
[ 0.000000] ACPI: BOOT 000FD145, 0028 (r1 DELL B8K 15 ASL 61)
[ 0.000000] ACPI: ASF! 000FD16D, 0092 (r32 DELL B8K 15 ASL 61)
[ 0.000000] ACPI: MCFG 000FD1FF, 003E (r1 DELL B8K 15 ASL 61)
[ 0.000000] ACPI: HPET 000FD23D, 0038 (r1 DELL B8K 15 ASL 61)
[ 0.000000] ACPI: TCPA 000FD499, 0032 (r1 DELL B8K 15 ASL 61)
[ 0.000000] ACPI: SLIC 000FD275, 0176 (r1 DELL B8K 15 ASL 61)
[ 0.000000] ACPI: SSDT CFDFFC40, 01F9 (r1 DpgPmm Cpu0Ist 11 INTL 20050624)
[ 0.000000] ACPI: SSDT CFE00049, 01F9 (r1 DpgPmm Cpu1Ist 11 INTL 20050624)
[ 0.000000] ACPI: SSDT CFE00452, 0140 (r1 DpgPmm CpuPm 10 INTL 20050624)
[ 0.000000] No NUMA configuration found
[ 0.000000] Faking a node at 0000000000000000-0000000020000000
[ 0.000000] Bootmem setup node 0 0000000000000000-0000000020000000
[ 0.000000] NODE_DATA [0000000000001000 - 0000000000005fff]
[ 0.000000] bootmap [0000000000008000 - 000000000000bfff] pages 4
[ 0.000000] (6 early reservations) ==> bootmem [0000000000 - 0020000000]
[ 0.000000] #0 [0000000000 - 0000001000] BIOS data page ==> [0000000000 - 0000001000]
[ 0.000000] #1 [0000006000 - 0000008000] TRAMPOLINE ==> [0000006000 - 0000008000]
[ 0.000000] #2 [000c569000 - 000c5d0000] XEN PAGETABLES ==> [000c569000 - 000c5d0000]
[ 0.000000] #3 [0000200000 - 00008defbc] TEXT DATA BSS ==> [0000200000 - 00008defbc]
[ 0.000000] #4 [00008df000 - 000c467a00] RAMDISK ==> [00008df000 - 000c467a00]
[ 0.000000] #5 [000c5d0000 - 000c668000] PGTABLE ==> [000c5d0000 - 000c668000]
[ 0.000000] found SMP MP-table at [ffff8800000fe710] 000fe710
[ 0.000000] Zone PFN ranges:
[ 0.000000] DMA 0x00000000 -> 0x00001000
[ 0.000000] DMA32 0x00001000 -> 0x00100000
[ 0.000000] Normal 0x00100000 -> 0x00100000
[ 0.000000] Movable zone start PFN for each node
[ 0.000000] early_node_map[3] active PFN ranges
[ 0.000000] 0: 0x00000000 -> 0x000000a0
[ 0.000000] 0: 0x00000100 -> 0x0000c468
[ 0.000000] 0: 0x0000c569 -> 0x00020000
[ 0.000000] ACPI: PM-Timer IO Port: 0x808
[ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x05] disabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x04] lapic_id[0x07] disabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x05] lapic_id[0x00] disabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x06] lapic_id[0x01] disabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x07] lapic_id[0x02] disabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x08] lapic_id[0x03] disabled)
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0xff] high level lint[0x1])
[ 0.000000] ACPI: IOAPIC (id[0x08] address[0xfec00000] gsi_base[0])
[ 0.000000] IOAPIC[0]: apic_id 8, version 0, address 0xfec00000, GSI 0-23
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[ 0.000000] ACPI: HPET id: 0x8086a201 base: 0xfed00000
[ 0.000000] Using ACPI (MADT) for SMP configuration information
[ 0.000000] SMP: Allowing 1 CPUs, 0 hotplug CPUs
[ 0.000000] PM: Registered nosave memory: 00000000000a0000 - 0000000000100000
[ 0.000000] PM: Registered nosave memory: 000000000c468000 - 000000000c569000
[ 0.000000] Allocating PCI resources starting at 30000000 (gap: 20000000:e0000000)
[ 0.000000] PERCPU: Allocating 69632 bytes of per cpu data
[ 0.000000] Built 1 zonelists in Node order, mobility grouping on. Total pages: 127164
[ 0.000000] Policy zone: DMA32
[ 0.000000] Kernel command line: root=/dev/sda1 ro console=tty0 xencons=ttyS0,115200 console=hvc0 earlyprintk=xen
[ 0.000000] Initializing CPU#0
[ 0.000000] xen: allocated irq 9 for acpi 9
[ 0.000000] PID hash table entries: 2048 (order: 11, 16384 bytes)
[ 0.000000] Detected 2394.014 MHz processor.
[ 0.004000] Console: colour dummy device 80x25
[ 0.004000] console [tty0] enabled
[ 0.004000] console handover: boot [xenboot0] -> real [hvc0]
[ 0.004000] allocated 5242880 bytes of page_cgroup
[ 0.004000] please try cgroup_disable=memory option if you don't want
[ 0.004000] Checking aperture...
[ 0.004000] No AGP bridge found
[ 0.004000] PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
[ 0.004000] Placing software IO TLB between 0x1c0000 - 0x126d70000
[ 0.004000] Memory: 244340k/524288k available (2996k kernel code, 1412k absent, 278536k reserved, 1786k data, 584k init)
[ 0.004000] SLUB: Genslabs=13, HWalign=64, Order=0-3, MinObjects=0, CPUs=1, Nodes=1
[ 0.004000] installing Xen timer for CPU 0
[ 0.004000] Calibrating delay loop (skipped), value calculated using timer frequency.. 4788.02 BogoMIPS (lpj=9576056)
[ 0.004000] Security Framework initialized
[ 0.004000] SELinux: Disabled at boot.
[ 0.004000] Dentry cache hash table entries: 65536 (order: 7, 524288 bytes)
[ 0.004000] Inode-cache hash table entries: 32768 (order: 6, 262144 bytes)
[ 0.004000] Mount-cache hash table entries: 256
[ 0.004000] Initializing cgroup subsys ns
[ 0.004000] Initializing cgroup subsys cpuacct
[ 0.004000] Initializing cgroup subsys memory
[ 0.004000] CPU: L1 I cache: 32K, L1 D cache: 32K
[ 0.004000] CPU: L2 cache: 4096K
[ 0.004000] CPU 0/0x0 -> Node 0
[ 0.004000] CPU: Physical Processor ID: 0
[ 0.004009] CPU: Processor Core ID: 0
[ 0.008017] SMP alternatives: switching to UP code
[ 0.034880] Freeing SMP alternatives: 24k freed
[ 0.036759] ACPI: Core revision 20080926
[ 0.245496] cpu 0 spinlock event irq 17
[ 0.245717] Brought up 1 CPUs
[ 0.245984] net_namespace: 1400 bytes
[ 0.245992] Booting paravirtualized kernel on Xen
[ 0.245998] Xen version: 3.4-unstable (preserve-AD) (dom0)
[ 0.246172] Grant table initialized
[ 0.246202] Time: 22:42:22 Date: 11/29/08
[ 0.246230] NET: Registered protocol family 16
[ 0.246691] ACPI FADT declares the system doesn't support PCIe ASPM, so disable it
[ 0.246700] ACPI: bus type pci registered
[ 0.246796] PCI: MCFG configuration 0: base e0000000 segment 0 buses 0 - 255
[ 0.246803] PCI: Not using MMCONFIG.
[ 0.246808] PCI: Using configuration type 1 for base access
[ 0.301193] ACPI: BIOS _OSI(Linux) query ignored
[ 0.301201] ACPI: DMI System Vendor: Dell Inc.
[ 0.301206] ACPI: DMI Product Name: OptiPlex 745
[ 0.301211] ACPI: DMI Product Version:
[ 0.301215] ACPI: DMI Board Name: 0HR330
[ 0.301219] ACPI: DMI BIOS Vendor: Dell Inc.
[ 0.301224] ACPI: DMI BIOS Date: 12/06/2007
[ 0.301227] ACPI: Please send DMI info above to linux-acpi@vger.kernel.org
[ 0.301233] ACPI: If "acpi_osi=Linux" works better, please notify linux-acpi@vger.kernel.org
[ 0.323312] ACPI: Interpreter enabled
[ 0.323319] ACPI: (supports S0 S3 S4 S5)
[ 0.323338] ACPI: Using IOAPIC for interrupt routing
[ 0.323501] PCI: MCFG configuration 0: base e0000000 segment 0 buses 0 - 255
[ 0.391058] PCI: MCFG area at e0000000 reserved in ACPI motherboard resources
[ 0.439019] PCI: Using MMCONFIG at e0000000 - efffffff
[ 0.537475] ACPI: ACPI Dock Station Driver: 1 docks/bays found
[ 0.537494] ACPI: PCI Root Bridge [PCI0] (0000:00)
[ 0.537693] pci 0000:00:01.0: PME# supported from D0 D3hot D3cold
[ 0.537702] pci 0000:00:01.0: PME# disabled
[ 0.538040] pci 0000:00:1a.7: PME# supported from D0 D3hot D3cold
[ 0.538050] pci 0000:00:1a.7: PME# disabled
[ 0.538166] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
[ 0.538174] pci 0000:00:1b.0: PME# disabled
[ 0.538255] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
[ 0.538263] pci 0000:00:1c.0: PME# disabled
[ 0.538352] pci 0000:00:1c.4: PME# supported from D0 D3hot D3cold
[ 0.538361] pci 0000:00:1c.4: PME# disabled
[ 0.538770] pci 0000:00:1d.7: PME# supported from D0 D3hot D3cold
[ 0.538780] pci 0000:00:1d.7: PME# disabled
[ 0.538964] pci 0000:00:1f.0: quirk: region 0800-087f claimed by ICH6 ACPI/GPIO/TCO
[ 0.538973] pci 0000:00:1f.0: quirk: region 0880-08bf claimed by ICH6 GPIO
[ 0.539099] pci 0000:00:1f.2: PME# supported from D3hot
[ 0.539107] pci 0000:00:1f.2: PME# disabled
[ 0.539298] pci 0000:00:1f.5: PME# supported from D3hot
[ 0.539306] pci 0000:00:1f.5: PME# disabled
[ 0.539845] pci 0000:03:00.0: PME# supported from D3hot D3cold
[ 0.539855] pci 0000:03:00.0: PME# disabled
[ 0.540073] pci 0000:04:02.0: PME# supported from D1 D2 D3hot D3cold
[ 0.540082] pci 0000:04:02.0: PME# disabled
[ 0.540154] pci 0000:00:1e.0: transparent bridge
[ 1.527098] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 9 10 *11 12 15)
[ 1.527925] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 9 *10 11 12 15)
[ 1.528741] ACPI: PCI Interrupt Link [LNKC] (IRQs *3 4 5 6 7 9 10 11 12 15)
[ 1.529520] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 9 10 11 12 15) *0, disabled.
[ 1.530343] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 *9 10 11 12 15)
[ 1.531121] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 9 10 11 12 15) *0, disabled.
[ 1.531932] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 7 *9 10 11 12 15)
[ 1.532753] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 *5 6 7 9 10 11 12 15)
[ 1.533252] ACPI Warning (tbutils-0217): Incorrect checksum in table [TCPA] - 00, should be 88 [20080926]
[ 1.533300] xen_balloon: Initialising balloon driver.
[ 1.533643] PCI: Using ACPI for IRQ routing
[ 1.548030] NET: Registered protocol family 8
[ 1.548038] NET: Registered protocol family 20
[ 1.548091] NetLabel: Initializing
[ 1.548098] NetLabel: domain hash size = 128
[ 1.548104] NetLabel: protocols = UNLABELED CIPSOv4
[ 1.548126] NetLabel: unlabeled traffic allowed by default
[ 1.548134] Xen: Initializing Xen DMA ops
[ 1.548140] Xen: Enabling DMA fallback to swiotlb
[ 1.548161] PCI-GART: No AMD GART found.
[ 1.560112] pnp: PnP ACPI init
[ 1.560135] ACPI: bus type pnp registered
[ 1.572690] pnp 00:01: io resource (0x800-0x85f) overlaps 0000:00:1f.0 BAR 7 (0x800-0x87f), disabling
[ 1.572700] pnp 00:01: io resource (0x860-0x8ff) overlaps 0000:00:1f.0 BAR 7 (0x800-0x87f), disabling
[ 1.572936] system 00:01: ioport range 0xc00-0xc7f has been reserved
[ 1.573500] xen_set_ioapic_routing: irq 13 gsi 13 vector 112 ioapic 0 pin 13 triggering 1 polarity 0
[ 1.574049] xen_set_ioapic_routing: irq 8 gsi 8 vector 72 ioapic 0 pin 8 triggering 1 polarity 0
[ 1.590567] xen_set_ioapic_routing: irq 4 gsi 4 vector 241 ioapic 0 pin 4 triggering 1 polarity 0
(XEN) io_apic.c:2216:
(XEN) ioapic_guest_write: apic=0, pin=4, old_irq=4, new_irq=4
(XEN) ioapic_guest_write: old_entry=000009f1, new_entry=000189f1
(XEN) ioapic_guest_write: Attempt to modify IO-APIC pin for in-use IRQ!
[ 1.613704] system 00:07: iomem range 0x0-0x9ffff could not be reserved
[ 1.613712] system 00:07: iomem range 0x100000-0xffffff could not be reserved
[ 1.613719] system 00:07: iomem range 0x1000000-0xcfdffbff could not be reserved
[ 1.613726] system 00:07: iomem range 0xf0000-0xfffff could not be reserved
[ 1.613732] system 00:07: iomem range 0xc0000-0xcffff could not be reserved
[ 1.613738] system 00:07: iomem range 0xfec00000-0xfecfffff has been reserved
[ 1.613744] system 00:07: iomem range 0xfee00000-0xfeefffff has been reserved
[ 1.613750] system 00:07: iomem range 0xffb00000-0xffbfffff has been reserved
[ 1.613756] system 00:07: iomem range 0xffc00000-0xffffffff has been reserved
[ 1.618025] system 00:08: ioport range 0x100-0x1fe has been reserved
[ 1.618032] system 00:08: ioport range 0x200-0x277 has been reserved
[ 1.618038] system 00:08: ioport range 0x280-0x2e7 has been reserved
[ 1.618044] system 00:08: ioport range 0x2f0-0x2f7 has been reserved
[ 1.618050] system 00:08: ioport range 0x300-0x377 has been reserved
[ 1.618055] system 00:08: ioport range 0x380-0x3bb has been reserved
[ 1.618061] system 00:08: ioport range 0x3c0-0x3e7 has been reserved
[ 1.618067] system 00:08: ioport range 0x3f6-0x3f7 has been reserved
[ 1.618072] system 00:08: ioport range 0x400-0x4cf has been reserved
[ 1.618078] system 00:08: ioport range 0x4d2-0x57f has been reserved
[ 1.618083] system 00:08: ioport range 0x580-0x677 has been reserved
[ 1.618089] system 00:08: ioport range 0x680-0x777 has been reserved
[ 1.618095] system 00:08: ioport range 0x780-0x7bb has been reserved
[ 1.618100] system 00:08: ioport range 0x7c0-0x7ff has been reserved
[ 1.618106] system 00:08: ioport range 0x8e0-0x8ff has been reserved
[ 1.618112] system 00:08: ioport range 0x900-0x9fe has been reserved
[ 1.618117] system 00:08: ioport range 0xa00-0xafe has been reserved
[ 1.618123] system 00:08: ioport range 0xb00-0xbfe has been reserved
[ 1.618129] system 00:08: ioport range 0xc80-0xcaf has been reserved
[ 1.618134] system 00:08: ioport range 0xcc0-0xcf7 has been reserved
[ 1.618140] system 00:08: ioport range 0xd00-0xdfe has been reserved
[ 1.618146] system 00:08: ioport range 0xe00-0xefe has been reserved
[ 1.618152] system 00:08: ioport range 0xf00-0xffe has been reserved
[ 1.618157] system 00:08: ioport range 0x2000-0x20fe has been reserved
[ 1.618163] system 00:08: ioport range 0x2100-0x21fe has been reserved
[ 1.618169] system 00:08: ioport range 0x2200-0x22fe has been reserved
[ 1.618175] system 00:08: ioport range 0x2300-0x23fe has been reserved
[ 1.618181] system 00:08: ioport range 0x2400-0x24fe has been reserved
[ 1.618187] system 00:08: ioport range 0x2500-0x25fe has been reserved
[ 1.618193] system 00:08: ioport range 0x2600-0x26fe has been reserved
[ 1.618198] system 00:08: ioport range 0x2700-0x27fe has been reserved
[ 1.618204] system 00:08: ioport range 0x2800-0x28fe has been reserved
[ 1.618210] system 00:08: ioport range 0x2900-0x29fe has been reserved
[ 1.618216] system 00:08: ioport range 0x2a00-0x2afe has been reserved
[ 1.618222] system 00:08: ioport range 0x2b00-0x2bfe has been reserved
[ 1.618228] system 00:08: ioport range 0x2c00-0x2cfe has been reserved
[ 1.618234] system 00:08: ioport range 0x2d00-0x2dfe has been reserved
[ 1.618240] system 00:08: ioport range 0x2e00-0x2efe has been reserved
[ 1.618246] system 00:08: ioport range 0x2f00-0x2ffe has been reserved
[ 1.618251] system 00:08: ioport range 0x5000-0x50fe has been reserved
[ 1.618257] system 00:08: ioport range 0x5100-0x51fe has been reserved
[ 1.618263] system 00:08: ioport range 0x5200-0x52fe has been reserved
[ 1.618269] system 00:08: ioport range 0x5300-0x53fe has been reserved
[ 1.618275] system 00:08: ioport range 0x5400-0x54fe has been reserved
[ 1.618281] system 00:08: ioport range 0x5500-0x55fe has been reserved
[ 1.618287] system 00:08: ioport range 0x5600-0x56fe has been reserved
[ 1.618293] system 00:08: ioport range 0x5700-0x57fe has been reserved
[ 1.618299] system 00:08: ioport range 0x5800-0x58fe has been reserved
[ 1.618305] system 00:08: ioport range 0x5900-0x59fe has been reserved
[ 1.618311] system 00:08: ioport range 0x5a00-0x5afe has been reserved
[ 1.618317] system 00:08: ioport range 0x5b00-0x5bfe has been reserved
[ 1.618323] system 00:08: ioport range 0x5c00-0x5cfe has been reserved
[ 1.618331] system 00:08: ioport range 0x5d00-0x5dfe has been reserved
[ 1.618337] system 00:08: ioport range 0x5e00-0x5efe has been reserved
[ 1.618343] system 00:08: ioport range 0x5f00-0x5ffe has been reserved
[ 1.618349] system 00:08: ioport range 0x6000-0x60fe has been reserved
[ 1.618355] system 00:08: ioport range 0x6100-0x61fe has been reserved
[ 1.618361] system 00:08: ioport range 0x6200-0x62fe has been reserved
[ 1.618367] system 00:08: ioport range 0x6300-0x63fe has been reserved
[ 1.618373] system 00:08: ioport range 0x6400-0x64fe has been reserved
[ 1.618379] system 00:08: ioport range 0x6500-0x65fe has been reserved
[ 1.618385] system 00:08: ioport range 0x6600-0x66fe has been reserved
[ 1.618391] system 00:08: ioport range 0x6700-0x67fe has been reserved
[ 1.618397] system 00:08: ioport range 0x6800-0x68fe has been reserved
[ 1.618404] system 00:08: ioport range 0x6900-0x69fe has been reserved
[ 1.618410] system 00:08: ioport range 0x6a00-0x6afe has been reserved
[ 1.618416] system 00:08: ioport range 0x6b00-0x6bfe has been reserved
[ 1.618422] system 00:08: ioport range 0x6c00-0x6cfe has been reserved
[ 1.618428] system 00:08: ioport range 0x6d00-0x6dfe has been reserved
[ 1.618434] system 00:08: ioport range 0x6e00-0x6efe has been reserved
[ 1.618440] system 00:08: ioport range 0x6f00-0x6ffe has been reserved
[ 1.618446] system 00:08: ioport range 0xa000-0xa0fe has been reserved
[ 1.618452] system 00:08: ioport range 0xa100-0xa1fe has been reserved
[ 1.618459] system 00:08: ioport range 0xa200-0xa2fe has been reserved
[ 1.618465] system 00:08: ioport range 0xa300-0xa3fe has been reserved
[ 1.618471] system 00:08: ioport range 0xa400-0xa4fe has been reserved
[ 1.618477] system 00:08: ioport range 0xa500-0xa5fe has been reserved
[ 1.618483] system 00:08: ioport range 0xa600-0xa6fe has been reserved
[ 1.618490] system 00:08: ioport range 0xa700-0xa7fe has been reserved
[ 1.618496] system 00:08: ioport range 0xa800-0xa8fe has been reserved
[ 1.618502] system 00:08: ioport range 0xa900-0xa9fe has been reserved
[ 1.618508] system 00:08: ioport range 0xaa00-0xaafe has been reserved
[ 1.618517] system 00:08: ioport range 0xab00-0xabfe has been reserved
[ 1.618791] system 00:08: ioport range 0xac00-0xacfe has been reserved
[ 1.625727] system 00:08: ioport range 0xad00-0xadfe has been reserved
[ 1.631259] system 00:08: ioport range 0xae00-0xaefe has been reserved
[ 1.638180] system 00:08: ioport range 0xaf00-0xaffe has been reserved
[ 1.645105] system 00:08: iomem range 0xe0000000-0xefffffff has been reserved
[ 1.653412] system 00:08: iomem range 0xfeda0000-0xfedacfff has been reserved
[ 1.660605] pnp: PnP ACPI: found 10 devices
[ 1.663100] ACPI: ACPI bus type pnp unregistered
[ 1.673597] pci 0000:00:01.0: PCI bridge, secondary bus 0000:01
[ 1.674180] pci 0000:00:01.0: IO window: 0xd000-0xdfff
[ 1.679727] pci 0000:00:01.0: MEM window: 0xfe900000-0xfeafffff
[ 1.686647] pci 0000:00:01.0: PREFETCH window: 0x000000d0000000-0x000000dfffffff
[ 1.693575] pci 0000:00:1c.0: PCI bridge, secondary bus 0000:02
[ 1.700491] pci 0000:00:1c.0: IO window: disabled
[ 1.704651] pci 0000:00:1c.0: MEM window: 0xfe800000-0xfe8fffff
[ 1.710187] pci 0000:00:1c.0: PREFETCH window: disabled
[ 1.715730] pci 0000:00:1c.4: PCI bridge, secondary bus 0000:03
[ 1.722645] pci 0000:00:1c.4: IO window: disabled
[ 1.726806] pci 0000:00:1c.4: MEM window: 0xfe700000-0xfe7fffff
[ 1.733726] pci 0000:00:1c.4: PREFETCH window: disabled
[ 1.737886] pci 0000:00:1e.0: PCI bridge, secondary bus 0000:04
[ 1.744805] pci 0000:00:1e.0: IO window: 0xc000-0xcfff
[ 1.748961] pci 0000:00:1e.0: MEM window: 0xfe500000-0xfe6fffff
[ 1.755884] pci 0000:00:1e.0: PREFETCH window: 0x00000030000000-0x000000300fffff
[ 1.764215] xen_set_ioapic_routing: irq 23 gsi 16 vector 144 ioapic 0 pin 16 triggering 0 polarity 1
[ 1.772500] pci 0000:00:01.0: PCI INT A -> GSI 16 (level, low) -> IRQ 23
[ 1.779421] xen: PCI device 0000:00:01.0 pin 1 -> irq 23
[ 1.784974] xen_allocate_pirq: returning irq 23 for gsi 16
[ 1.790499] xen_set_ioapic_routing: irq 23 gsi 16 vector 144 ioapic 0 pin 16 triggering 0 polarity 1
[ 1.800193] pci 0000:00:1c.0: PCI INT A -> GSI 16 (level, low) -> IRQ 23
[ 1.805728] xen: PCI device 0000:00:1c.0 pin 1 -> irq 23
[ 1.811283] xen_allocate_pirq: returning irq 23 for gsi 16
[ 1.816807] xen_set_ioapic_routing: irq 23 gsi 16 vector 144 ioapic 0 pin 16 triggering 0 polarity 1
[ 1.826502] pci 0000:00:1c.4: PCI INT A -> GSI 16 (level, low) -> IRQ 23
[ 1.833423] xen: PCI device 0000:00:1c.4 pin 1 -> irq 23
[ 1.837595] bus: 00 index 0 io port: [0x00-0xffff]
[ 1.843115] bus: 00 index 1 mmio: [0x000000-0xffffffffffffffff]
[ 1.850040] bus: 01 index 0 io port: [0xd000-0xdfff]
[ 1.854192] bus: 01 index 1 mmio: [0xfe900000-0xfeafffff]
[ 1.859732] bus: 01 index 2 mmio: [0xd0000000-0xdfffffff]
[ 1.865270] bus: 01 index 3 mmio: [0x0-0x0]
[ 1.869424] bus: 02 index 0 mmio: [0x0-0x0]
[ 1.873579] bus: 02 index 1 mmio: [0xfe800000-0xfe8fffff]
[ 1.879117] bus: 02 index 2 mmio: [0x0-0x0]
[ 1.883271] bus: 02 index 3 mmio: [0x0-0x0]
[ 1.887472] bus: 03 index 0 mmio: [0x0-0x0]
[ 1.891579] bus: 03 index 1 mmio: [0xfe700000-0xfe7fffff]
[ 1.897119] bus: 03 index 2 mmio: [0x0-0x0]
[ 1.901271] bus: 03 index 3 mmio: [0x0-0x0]
[ 1.905426] bus: 04 index 0 io port: [0xc000-0xcfff]
[ 1.910966] bus: 04 index 1 mmio: [0xfe500000-0xfe6fffff]
[ 1.916504] bus: 04 index 2 mmio: [0x30000000-0x300fffff]
[ 1.922044] bus: 04 index 3 io port: [0x00-0xffff]
[ 1.926196] bus: 04 index 4 mmio: [0x000000-0xffffffffffffffff]
[ 1.933128] NET: Registered protocol family 2
[ 1.976151] IP route cache hash table entries: 16384 (order: 5, 131072 bytes)
[ 1.976491] TCP established hash table entries: 65536 (order: 8, 1048576 bytes)
[ 1.976907] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
[ 1.977196] TCP: Hash tables configured (established 65536 bind 65536)
[ 1.977202] TCP reno registered
[ 1.988138] NET: Registered protocol family 1
[ 1.988264] checking if image is initramfs... it is
[ 2.113292] Freeing initrd memory: 192034k freed
[ 2.217332] Simple Boot Flag at 0x7a set to 0x1
[ 2.217954] audit: initializing netlink socket (disabled)
[ 2.217972] type=2000 audit(1227998544.759:1): initialized
[ 2.223575] HugeTLB registered 2 MB page size, pre-allocated 0 pages
[ 2.225895] VFS: Disk quotas dquot_6.5.1
[ 2.225975] Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[ 2.226081] msgmni has been set to 1399
[ 2.226239] alg: No test for stdrng (krng)
[ 2.226254] io scheduler noop registered
[ 2.226259] io scheduler anticipatory registered
[ 2.226263] io scheduler deadline registered
[ 2.226362] io scheduler cfq registered (default)
[ 2.279931] pcieport-driver 0000:00:01.0: found MSI capability
[ 2.280251] pcieport-driver 0000:00:1c.0: found MSI capability
[ 2.280543] pcieport-driver 0000:00:1c.4: found MSI capability
[ 2.281026] Event-channel device installed.
[ 2.281031] ***blkif_init
[ 2.311970] hpet_acpi_add: no address or irqs in _CRS
[ 2.312077] Linux agpgart interface v0.103
[ 2.312084] Serial: 8250/16550 driver4 ports, IRQ sharing enabled
[ 2.314097] brd: module loaded
[ 2.314161] input: Macintosh mouse button emulation as /devices/virtual/input/input0
[ 2.314312] PNP: No PS/2 controller found. Probing ports directly.
[ 2.316264] i8042: probe of i8042 failed with error -38
[ 2.324284] mice: PS/2 mouse device common for all mice
[ 2.324365] rtc_cmos 00:05: RTC can wake from S4
[ 2.324428] rtc_cmos 00:05: rtc core: registered rtc_cmos as rtc0
[ 2.324467] rtc0: alarms up to one day, 242 bytes nvram
[ 2.324501] cpuidle: using governor ladder
[ 2.324506] cpuidle: using governor menu
[ 2.324825] TCP cubic registered
[ 2.324844] IO APIC resources could be not be allocated.
[ 2.325022] registered taskstats version 1
[ 2.325112] Magic number: 0:231:756
[ 2.325232] rtc_cmos 00:05: setting system clock to 2008-11-29 22:42:24 UTC (1227998544)
[ 2.325240] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
[ 2.325245] EDD information not available.
[ 2.325266] Freeing unused kernel memory: 584k freed
[ 2.325490] Write protecting the kernel read-only data: 4304k
Loading, please wait...
Couldnt get a file descriptor referring to the console
Begin: Loading essential drivers... ...
[ 2.413962] fuse init (API version 7.10)
[ 2.428738] processor ACPI_CPU:00: registered as cooling_device0
Done.
Begin: Running /scripts/init-premount ...
Done.
Begin: Mounting root file system... ...
Begin: Running /scripts/local-top ...
Done.
Begin: Waiting for root file system... ...
[ 2.816407] usbcore: registered new interface driver usbfs
[ 2.816437] usbcore: registered new interface driver hub
[ 2.816474] usbcore: registered new device driver usb
[ 2.819015] uhci_hcd: USB Universal Host Controller Interface driver
[ 2.819064] xen_allocate_pirq: returning irq 23 for gsi 16
[ 2.819071] xen_set_ioapic_routing: irq 23 gsi 16 vector 144 ioapic 0 pin 16 triggering 0 polarity 1
[ 2.819083] uhci_hcd 0000:00:1a.0: PCI INT A -> GSI 16 (level, low) -> IRQ 23
[ 2.819090] xen: PCI device 0000:00:1a.0 pin 1 -> irq 23
[ 2.819108] uhci_hcd 0000:00:1a.0: UHCI Host Controller
[ 2.819143] uhci_hcd 0000:00:1a.0: new USB bus registered, assigned bus number 1
[ 2.819193] uhci_hcd 0000:00:1a.0: irq 23, io base 0x0000ff20
[ 2.819397] uhci_hcd 0000:00:1a.0: host controller process error, something bad happened!
[ 2.819405] uhci_hcd 0000:00:1a.0: host controller halted, very bad!
[ 2.819428] uhci_hcd 0000:00:1a.0: HC died; cleaning up
[ 2.819453] uhci_hcd 0000:00:1a.0: USB bus 1 deregistered
[ 2.819484] xen: disable pci device 0000:00:1a.0
[ 2.819490] Pid: 1111, comm: modprobe Not tainted 2.6.28-rc6-tip #1
[ 2.819496] Call Trace:
[ 2.819505] [<ffffffff803a0850>] ? pci_bus_write_config_word+0x70/0x90
[ 2.819514] [<ffffffff8020fd6e>] xen_pci_pirq_disable+0x1e/0x20
[ 2.819521] [<ffffffff8043deeb>] pcibios_disable_device+0x1b/0x20
[ 2.819528] [<ffffffff803a29ae>] pci_disable_device+0x5e/0x90
[ 2.819544] [<ffffffffa0047dee>] usb_hcd_pci_probe+0xbe/0x2c0 [usbcore]
[ 2.819552] [<ffffffff803a6865>] pci_device_probe+0xd5/0x130
[ 2.819559] [<ffffffff8033d54e>] ? sysfs_create_link+0xe/0x10
[ 2.819566] [<ffffffff8041d16b>] driver_probe_device+0x9b/0x1a0
[ 2.819572] [<ffffffff8041d309>] __driver_attach+0x99/0xa0
[ 2.819578] [<ffffffff8041d270>] ? __driver_attach+0x0/0xa0
[ 2.819584] [<ffffffff8041c9f4>] bus_for_each_dev+0x54/0x80
[ 2.819590] [<ffffffff8041cfac>] driver_attach+0x1c/0x20
[ 2.819595] [<ffffffff8041c319>] bus_add_driver+0x1e9/0x260
[ 2.819601] [<ffffffff8041d5af>] driver_register+0x5f/0x140
[ 2.819608] [<ffffffffa006d000>] ? uhci_hcd_init+0x0/0xd5 [uhci_hcd]
[ 2.819614] [<ffffffff803a665d>] __pci_register_driver+0x6d/0xb0
[ 2.819621] [<ffffffffa006d000>] ? uhci_hcd_init+0x0/0xd5 [uhci_hcd]
[ 2.819628] [<ffffffffa006d000>] ? uhci_hcd_init+0x0/0xd5 [uhci_hcd]
[ 2.819635] [<ffffffffa006d08a>] uhci_hcd_init+0x8a/0xd5 [uhci_hcd]
[ 2.819641] [<ffffffff8020a03c>] do_one_initcall+0x3c/0x170
[ 2.819649] [<ffffffff80268963>] ? __blocking_notifier_call_chain+0x63/0x80
[ 2.819656] [<ffffffff80278d32>] sys_init_module+0xb2/0x1f0
[ 2.819662] [<ffffffff802125ca>] system_call_fastpath+0x16/0x1b
[ 2.819668] uhci_hcd 0000:00:1a.0: init 0000:00:1a.0 fail, -108
[ 2.819675] uhci_hcd: probe of 0000:00:1a.0 failed with error -108
[ 2.819704] xen_set_ioapic_routing: irq 25 gsi 17 vector 152 ioapic 0 pin 17 triggering 0 polarity 1
[ 2.819714] uhci_hcd 0000:00:1a.1: PCI INT B -> GSI 17 (level, low) -> IRQ 25
[ 2.819721] xen: PCI device 0000:00:1a.1 pin 2 -> irq 25
[ 2.819735] uhci_hcd 0000:00:1a.1: UHCI Host Controller
[ 2.819760] uhci_hcd 0000:00:1a.1: new USB bus registered, assigned bus number 1
[ 2.819799] uhci_hcd 0000:00:1a.1: irq 25, io base 0x0000ff00
[ 2.819843] uhci_hcd 0000:00:1a.1: host controller process error, something bad happened!
[ 2.819851] uhci_hcd 0000:00:1a.1: host controller halted, very bad!
[ 2.819874] uhci_hcd 0000:00:1a.1: HC died; cleaning up
[ 2.819883] usb usb1: unable to read config index 0 descriptor/start: -108
[ 2.819888] usb usb1: chopping to 0 config(s)
[ 2.819894] usb usb1: string descriptor 0 read error: -108
[ 2.819899] usb usb1: string descriptor 0 read error: -108
[ 2.819904] usb usb1: string descriptor 0 read error: -108
[ 2.819985] usb usb1: no configuration chosen from 0 choices
[ 2.820107] uhci_hcd 0000:00:1a.1: HC died; cleaning up
[ 2.820116] BUG: unable to handle kernel NULL pointer dereference at 0000000000000098
[ 2.820124] IP: [<ffffffffa003633b>] usb_kick_khubd+0xb/0x20 [usbcore]
[ 2.820139] PGD bbc0067 PUD bbc1067 PMD 0
[ 2.820146] Oops: 0000 [#1] SMP
[ 2.820151] last sysfs file: /sys/devices/virtual/vtconsole/vtcon0/uevent
[ 2.820157] CPU 0
[ 2.820161] Modules linked in: uhci_hcd(+) usbcore thermal processor fan fuse
[ 2.820172] Pid: 1111, comm: modprobe Not tainted 2.6.28-rc6-tip #1
[ 2.820178] RIP: e030:[<ffffffffa003633b>] [<ffffffffa003633b>] usb_kick_khubd+0xb/0x20 [usbcore]
[ 2.820193] RSP: e02b:ffff88000bbafc38 EFLAGS: 00010002
[ 2.820198] RAX: 0000000000000000 RBX: 0000000000000200 RCX: 0000000000000000
[ 2.820204] RDX: ffff88008bec4000 RSI: 0000000000000000 RDI: ffff88001f6f3000
[ 2.820210] RBP: ffff88000bbafc38 R08: 0000000000000000 R09: ffff88000c687200
[ 2.820215] R10: 0000000000000000 R11: 0000000000000000 R12: ffff88000b813400
[ 2.820221] R13: 0000000000000000 R14: ffff88000b813400 R15: ffff88001f479880
[ 2.820230] FS: 00007fa652c176e0(0000) GS:ffffffff806f9a00(0000) knlGS:0000000000000000
[ 2.820237] CS: e033 DS: 0000 ES: 0000 CR0: 000000008005003b
[ 2.820241] CR2: 0000000000000098 CR3: 000000000bbb8000 CR4: 0000000000002620
[ 2.820247] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
[ 2.820253] DR3: 0000000000000000 DR6: 00000000ffff0ff0 DR7: 0000000000000400
[ 2.820260] Process modprobe (pid: 1111, threadinfo ffff88000bbae000, task ffff8800134e0000)
[ 2.820266] Stack:
[ 2.820269] ffff88000bbafc58 ffffffffa003a2b6 ffff88001f6f3000 ffff88001f4799b0
[ 2.820277] ffff88000bbafca8 ffffffffa003b784 ffff88001f479800 000000191f479800
[ 2.820287] ffff88001f6f3000 ffff88001f4798e0 ffff88001f479800 ffff88000b813400
[ 2.820297] Call Trace:
[ 2.820300] [<ffffffffa003a2b6>] usb_hc_died+0x66/0x80 [usbcore]
[ 2.820314] [<ffffffffa003b784>] usb_add_hcd+0x5c4/0x630 [usbcore]
[ 2.820329] [<ffffffffa0047ef1>] usb_hcd_pci_probe+0x1c1/0x2c0 [usbcore]
[ 2.820343] [<ffffffff803a6865>] pci_device_probe+0xd5/0x130
[ 2.820350] [<ffffffff8033d54e>] ? sysfs_create_link+0xe/0x10
[ 2.820357] [<ffffffff8041d16b>] driver_probe_device+0x9b/0x1a0
[ 2.820364] [<ffffffff8041d309>] __driver_attach+0x99/0xa0
[ 2.820370] [<ffffffff8041d270>] ? __driver_attach+0x0/0xa0
[ 2.820376] [<ffffffff8041c9f4>] bus_for_each_dev+0x54/0x80
[ 2.820382] [<ffffffff8041cfac>] driver_attach+0x1c/0x20
[ 2.820388] [<ffffffff8041c319>] bus_add_driver+0x1e9/0x260
[ 2.820394] [<ffffffff8041d5af>] driver_register+0x5f/0x140
[ 2.820400] [<ffffffffa006d000>] ? uhci_hcd_init+0x0/0xd5 [uhci_hcd]
[ 2.820408] [<ffffffff803a665d>] __pci_register_driver+0x6d/0xb0
[ 2.824056] [<ffffffffa006d000>] ? uhci_hcd_init+0x0/0xd5 [uhci_hcd]
[ 2.824056] [<ffffffffa006d000>] ? uhci_hcd_init+0x0/0xd5 [uhci_hcd]
[ 2.824056] [<ffffffffa006d08a>] uhci_hcd_init+0x8a/0xd5 [uhci_hcd]
[ 2.824056] [<ffffffff8020a03c>] do_one_initcall+0x3c/0x170
[ 2.824056] [<ffffffff80268963>] ? __blocking_notifier_call_chain+0x63/0x80
[ 2.824056] [<ffffffff80278d32>] sys_init_module+0xb2/0x1f0
[ 2.824056] [<ffffffff802125ca>] system_call_fastpath+0x16/0x1b
[ 2.824056] Code: ff 3e 44 0f ab 63 70 48 89 df e8 31 ff ff ff 48 8b 1c 24 4c 8b 64 24 08 c9 c3 66 0f 1f 44 00 00 55 48 8b 87 20 03 00 00 48 89 e5 <48> 8b 80 98 00 00 00 48 8b b8 b8 01 00 00 e8 02 ff ff ff c9 c3
[ 2.824056] RIP [<ffffffffa003633b>] usb_kick_khubd+0xb/0x20 [usbcore]
[ 2.824056] RSP <ffff88000bbafc38>
[ 2.824056] CR2: 0000000000000098
[ 2.824056] ---[ end trace 2ba0b4ff1e29f134 ]---
[ 2.907329] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 2.912126] Warning! ehci_hcd should always be loaded before uhci_hcd and ohci_hcd, not after
udevd-event[1110]: run_program: '/sbin/modprobe' abnormal exit
[ 2.971097] tg3.c:v3.94 (August 14, 2008)
[ 2.971122] xen: enabling pci device 0000:03:00.0 pin 1
[ 2.971128] vendor=8086 device=2847
[ 2.971133] xen: registering gsi 16 triggering 0 polarity 1
[ 2.971138] xen_allocate_pirq: returning irq 23 for gsi 16
[ 2.971143] xen: --> irq=23
[ 2.971147] xen_set_ioapic_routing: irq 23 gsi 16 vector 144 ioapic 0 pin 16 triggering 0 polarity 1
[ 2.971159] tg3 0000:03:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 23
[ 2.971165] xen: PCI device 0000:03:00.0 pin 1 -> irq 23
[ 2.974452] tg3 0000:03:00.0: setting latency timer to 64
[ 3.013643] eth0: Tigon3 [partno(BCM95754) rev b002 PHY(5787)] (PCI Express) 10/100/1000Base-T Ethernet 00:1a:a0:a9:f2:81
[ 3.013656] eth0: RXcsums[1] LinkChgREG[0] MIirq[0] ASF[0] WireSpeed[1] TSOcap[1]
[ 3.013663] eth0: dma_rwctrl[76180000] dma_mask[64-bit]
[ 3.036638] r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded
[ 3.036663] xen: enabling pci device 0000:04:02.0 pin 1
[ 3.036670] vendor=8086 device=244e
[ 3.036674] xen: registering gsi 18 triggering 0 polarity 1
[ 3.036689] xen: --> irq=26
[ 3.036693] xen_set_ioapic_routing: irq 26 gsi 18 vector 160 ioapic 0 pin 18 triggering 0 polarity 1
[ 3.036742] r8169 0000:04:02.0: PCI INT A -> GSI 18 (level, low) -> IRQ 26
[ 3.042293] xen: PCI device 0000:04:02.0 pin 1 -> irq 26
[ 3.048165] r8169 0000:04:02.0: no PCI Express capability
[ 3.082286] eth1: RTL8110s at 0xffffc2000017ef00, 00:18:4d:f0:19:07, XID 04000000 IRQ 26
[ 3.095338] SCSI subsystem initialized
[ 3.124892] libata version 3.00 loaded.
Done.
Gave up waiting for root device. Common problems:
- Boot args (cat /proc/cmdline)
- Check rootdelay= (did the system wait long enough?)
- Check root= (did the system wait for the right device?)
- Missing modules (cat /proc/modules; ls /dev)
ALERT! /dev/sda1 does not exist. Dropping to a shell!
BusyBox v1.10.2 (Ubuntu 1:1.10.2-1ubuntu6) built-in shell (ash)
Enter 'help' for a list of built-in commands.
(initramfs) ls /dev
console ptyqc tty17 ttyq7
null ptyqd tty18 ttyq8
ttyS1 ptyqe tty19 ttyq9
ttyS2 ptyqf tty2 ttyqa
ttyS3 ptyr0 tty20 ttyqb
rtc0 ptyr1 tty21 ttyqc
ttyS0 ptyr2 tty22 ttyqd
ram0 ptyr3 tty23 ttyqe
ram1 ptyr4 tty24 ttyqf
ram10 ptyr5 tty25 ttyr0
ram11 ptyr6 tty26 ttyr1
ram12 ptyr7 tty27 ttyr2
ram13 ptyr8 tty28 ttyr3
ram14 ptyr9 tty29 ttyr4
ram15 ptyra tty3 ttyr5
ram2 ptyrb tty30 ttyr6
ram3 ptyrc tty31 ttyr7
ram4 ptyrd tty32 ttyr8
ram5 ptyre tty33 ttyr9
ram6 ptyrf tty34 ttyra
ram7 ptys0 tty35 ttyrb
ram8 ptys1 tty36 ttyrc
ram9 ptys2 tty37 ttyrd
input ptys3 tty38 ttyre
full ptys4 tty39 ttyrf
kmem ptys5 tty4 ttys0
kmsg ptys6 tty40 ttys1
mem ptys7 tty41 ttys2
oldmem ptys8 tty42 ttys3
port ptys9 tty43 ttys4
random ptysa tty44 ttys5
urandom ptysb tty45 ttys6
zero ptysc tty46 ttys7
cpu_dma_latency ptysd tty47 ttys8
evtchn ptyse tty48 ttys9
fuse ptysf tty49 ttysa
hpet ptyt0 tty5 ttysb
network_latency ptyt1 tty50 ttysc
network_throughput ptyt2 tty51 ttysd
psaux ptyt3 tty52 ttyse
snapshot ptyt4 tty53 ttysf
hvc0 ptyt5 tty54 ttyt0
hvc1 ptyt6 tty55 ttyt1
hvc2 ptyt7 tty56 ttyt2
hvc3 ptyt8 tty57 ttyt3
hvc4 ptyt9 tty58 ttyt4
hvc5 ptyta tty59 ttyt5
hvc6 ptytb tty6 ttyt6
hvc7 ptytc tty60 ttyt7
ptmx ptytd tty61 ttyt8
ptya0 ptyte tty62 ttyt9
ptya1 ptytf tty63 ttyta
ptya2 ptyu0 tty7 ttytb
ptya3 ptyu1 tty8 ttytc
ptya4 ptyu2 tty9 ttytd
ptya5 ptyu3 ttya0 ttyte
ptya6 ptyu4 ttya1 ttytf
ptya7 ptyu5 ttya2 ttyu0
ptya8 ptyu6 ttya3 ttyu1
ptya9 ptyu7 ttya4 ttyu2
ptyaa ptyu8 ttya5 ttyu3
ptyab ptyu9 ttya6 ttyu4
ptyac ptyua ttya7 ttyu5
ptyad ptyub ttya8 ttyu6
ptyae ptyuc ttya9 ttyu7
ptyaf ptyud ttyaa ttyu8
ptyb0 ptyue ttyab ttyu9
ptyb1 ptyuf ttyac ttyua
ptyb2 ptyv0 ttyad ttyub
ptyb3 ptyv1 ttyae ttyuc
ptyb4 ptyv2 ttyaf ttyud
ptyb5 ptyv3 ttyb0 ttyue
ptyb6 ptyv4 ttyb1 ttyuf
ptyb7 ptyv5 ttyb2 ttyv0
ptyb8 ptyv6 ttyb3 ttyv1
ptyb9 ptyv7 ttyb4 ttyv2
ptyba ptyv8 ttyb5 ttyv3
ptybb ptyv9 ttyb6 ttyv4
ptybc ptyva ttyb7 ttyv5
ptybd ptyvb ttyb8 ttyv6
ptybe ptyvc ttyb9 ttyv7
ptybf ptyvd ttyba ttyv8
ptyc0 ptyve ttybb ttyv9
ptyc1 ptyvf ttybc ttyva
ptyc2 ptyw0 ttybd ttyvb
ptyc3 ptyw1 ttybe ttyvc
ptyc4 ptyw2 ttybf ttyvd
ptyc5 ptyw3 ttyc0 ttyve
ptyc6 ptyw4 ttyc1 ttyvf
ptyc7 ptyw5 ttyc2 ttyw0
ptyc8 ptyw6 ttyc3 ttyw1
ptyc9 ptyw7 ttyc4 ttyw2
ptyca ptyw8 ttyc5 ttyw3
ptycb ptyw9 ttyc6 ttyw4
ptycc ptywa ttyc7 ttyw5
ptycd ptywb ttyc8 ttyw6
ptyce ptywc ttyc9 ttyw7
ptycf ptywd ttyca ttyw8
ptyd0 ptywe ttycb ttyw9
ptyd1 ptywf ttycc ttywa
ptyd2 ptyx0 ttycd ttywb
ptyd3 ptyx1 ttyce ttywc
ptyd4 ptyx2 ttycf ttywd
ptyd5 ptyx3 ttyd0 ttywe
ptyd6 ptyx4 ttyd1 ttywf
ptyd7 ptyx5 ttyd2 ttyx0
ptyd8 ptyx6 ttyd3 ttyx1
ptyd9 ptyx7 ttyd4 ttyx2
ptyda ptyx8 ttyd5 ttyx3
ptydb ptyx9 ttyd6 ttyx4
ptydc ptyxa ttyd7 ttyx5
ptydd ptyxb ttyd8 ttyx6
ptyde ptyxc ttyd9 ttyx7
ptydf ptyxd ttyda ttyx8
ptye0 ptyxe ttydb ttyx9
ptye1 ptyxf ttydc ttyxa
ptye2 ptyy0 ttydd ttyxb
ptye3 ptyy1 ttyde ttyxc
ptye4 ptyy2 ttydf ttyxd
ptye5 ptyy3 ttye0 ttyxe
ptye6 ptyy4 ttye1 ttyxf
ptye7 ptyy5 ttye2 ttyy0
ptye8 ptyy6 ttye3 ttyy1
ptye9 ptyy7 ttye4 ttyy2
ptyea ptyy8 ttye5 ttyy3
ptyeb ptyy9 ttye6 ttyy4
ptyec ptyya ttye7 ttyy5
ptyed ptyyb ttye8 ttyy6
ptyee ptyyc ttye9 ttyy7
ptyef ptyyd ttyea ttyy8
ptyp0 ptyye ttyeb ttyy9
ptyp1 ptyyf ttyec ttyya
ptyp2 ptyz0 ttyed ttyyb
ptyp3 ptyz1 ttyee ttyyc
ptyp4 ptyz2 ttyef ttyyd
ptyp5 ptyz3 ttyp0 ttyye
ptyp6 ptyz4 ttyp1 ttyyf
ptyp7 ptyz5 ttyp2 ttyz0
ptyp8 ptyz6 ttyp3 ttyz1
ptyp9 ptyz7 ttyp4 ttyz2
ptypa ptyz8 ttyp5 ttyz3
ptypb ptyz9 ttyp6 ttyz4
ptypc ptyza ttyp7 ttyz5
ptypd ptyzb ttyp8 ttyz6
ptype ptyzc ttyp9 ttyz7
ptypf ptyzd ttypa ttyz8
ptyq0 ptyze ttypb ttyz9
ptyq1 ptyzf ttypc ttyza
ptyq2 tty ttypd ttyzb
ptyq3 tty0 ttype ttyzc
ptyq4 tty1 ttypf ttyzd
ptyq5 tty10 ttyq0 ttyze
ptyq6 tty11 ttyq1 ttyzf
ptyq7 tty12 ttyq2 vcs
ptyq8 tty13 ttyq3 vcsa
ptyq9 tty14 ttyq4 bus
ptyqa tty15 ttyq5 usbdev1.1_ep00
ptyqb tty16 ttyq6
(initramfs)cat /proc/cmdline
root=/dev/sda1 ro console=tty0 xencons=ttyS0,115200 console=hvc0 earlyprintk=xen
(initramfs) cat /proc/modules
ata_piix 33586 1 - Loading 0xffffffffa0127000
libata 196576 1 ata_piix, Live 0xffffffffa00f5000
scsi_mod 184792 1 libata, Live 0xffffffffa00c5000
r8169 46084 0 - Live 0xffffffffa00b7000
mii 14464 1 r8169, Live 0xffffffffa00b1000
tg3 139396 0 - Live 0xffffffffa008c000
libphy 32896 1 tg3, Live 0xffffffffa007e000
ehci_hcd 46726 1 - Loading 0xffffffffa0070000
uhci_hcd 34037 1 - Loading 0xffffffffa0062000
usbcore 174512 3 ehci_hcd,uhci_hcd, Live 0xffffffffa0035000
thermal 27552 0 - Live 0xffffffffa002c000
processor 55224 1 thermal, Live 0xffffffffa0019000
fan 13832 0 - Live 0xffffffffa0013000
fuse 65728 1 - Live 0xffffffffa0000000
[-- Attachment #3: Type: text/plain, Size: 138 bytes --]
_______________________________________________
Xen-devel mailing list
Xen-devel@lists.xensource.com
http://lists.xensource.com/xen-devel
^ permalink raw reply [flat|nested] 22+ messages in thread
* Re: pv_ops dom0 testing
2008-11-29 23:05 ` Todd Deshane
@ 2008-12-01 23:19 ` Jeremy Fitzhardinge
2008-12-02 2:49 ` Todd Deshane
0 siblings, 1 reply; 22+ messages in thread
From: Jeremy Fitzhardinge @ 2008-12-01 23:19 UTC (permalink / raw)
To: deshantm; +Cc: xen-devel mailing list, Aviv Grafi
Todd Deshane wrote:
> On Sat, Nov 29, 2008 at 5:32 PM, Aviv Grafi <aviv@neocleus.com> wrote:
>
>> I solved this one by adding "console=hvc0 earlyprintk=xen" to the dom0
>> kernel boot line (thanks to Jeremy Fitzhardinge [jeremy@goop.org]).
>>
>
> Thanks again Aviv. I am really close now. The screen still shows nothing,
> but the debug output has the dom0 kernel boot.
> (Not sure why that would be... any thoughts?)
>
> In the debug output however I successfully get to the the
> (initramfs) prompt.
>
> Full output attached, but some interesting parts inline:
>
> (initramfs)cat /proc/cmdline
> root=/dev/sda1 ro console=tty0 xencons=ttyS0,115200 console=hvc0 earlyprintk=xen
>
> (initramfs) cat /proc/modules
> ata_piix 33586 1 - Loading 0xffffffffa0127000
> libata 196576 1 ata_piix, Live 0xffffffffa00f5000
> scsi_mod 184792 1 libata, Live 0xffffffffa00c5000
> r8169 46084 0 - Live 0xffffffffa00b7000
> mii 14464 1 r8169, Live 0xffffffffa00b1000
> tg3 139396 0 - Live 0xffffffffa008c000
> libphy 32896 1 tg3, Live 0xffffffffa007e000
> ehci_hcd 46726 1 - Loading 0xffffffffa0070000
> uhci_hcd 34037 1 - Loading 0xffffffffa0062000
> usbcore 174512 3 ehci_hcd,uhci_hcd, Live 0xffffffffa0035000
> thermal 27552 0 - Live 0xffffffffa002c000
> processor 55224 1 thermal, Live 0xffffffffa0019000
> fan 13832 0 - Live 0xffffffffa0013000
> fuse 65728 1 - Live 0xffffffffa0000000
>
> a listing of /dev doesn't show any sd* devices.
>
What's your scsi host controller?
USB is known to have problems, so I generally disable it for now, until
I've worked out what's failing. You have an oops in your trace which
could be leaving other things in a bad state.
> So I am guessing I am running into a driver issue at this
> point. I will dig around more and compare my working
> vanilla linux config with the dom0 kernel to see if there
> is something missing in my dom0 kernel.
>
Yes, that would be interesting to compare.
> Thanks for the help so far and if anything comes to mind
> why I don't see console output on the screen (and only in
> the debug output) that would be helpful to me.
>
> I'll report back on progress.
>
> If there are any obvious known workarounds, problems, bugs etc.
> let me know. I know that the pv_ops dom0 kernel is very much in
> development, but I am willing to try to work through that.
>
Thanks for playing with this.
J
^ permalink raw reply [flat|nested] 22+ messages in thread
* Re: pv_ops dom0 testing
2008-12-01 23:19 ` Jeremy Fitzhardinge
@ 2008-12-02 2:49 ` Todd Deshane
0 siblings, 0 replies; 22+ messages in thread
From: Todd Deshane @ 2008-12-02 2:49 UTC (permalink / raw)
To: Jeremy Fitzhardinge; +Cc: xen-devel mailing list, Aviv Grafi
[-- Attachment #1.1: Type: text/plain, Size: 1512 bytes --]
What's your scsi host controller?
>
The disk controller is just onboard SATA (a dell optiplex 745)
from lspci:
IDE interface: Intel Corporation 82801H (ICH8 Family) 4 port SATA IDE
Controller
Full lspci from the working ubuntu linux kernel attached.
> USB is known to have problems, so I generally disable it for now, until
> I've worked out what's failing. You have an oops in your trace which could
> be leaving other things in a bad state.
>
I can't disable USB completely since the system I am using doesn't have any
PS/2 ports.
I did a test boot without USB
I built a fresh kernel, since I got the previous one in a really bad state,
but the new
kernel I just built is not doing well either.
I just did a defconfig + all the xen options
Attached is 4 boot attempts, all with nousb, and also trying to disable the
usb in the
2nd and 3rd and turning USB back on in the 4th.
>
> So I am guessing I am running into a driver issue at this
>> point. I will dig around more and compare my working
>> vanilla linux config with the dom0 kernel to see if there
>> is something missing in my dom0 kernel.
>>
>>
>
> Yes, that would be interesting to compare.
>
I still need to look at this more closely and build the kernel more
carefully based on a working one.
Thanks for playing with this.
>
> J
>
I still got a lot more testing I can do tomorrow.
I'll keep in touch and thanks for your efforts
on the pv_ops dom0 kernel
Cheers,
Todd
--
Todd Deshane
http://todddeshane.net
http://runningxen.com
[-- Attachment #1.2: Type: text/html, Size: 2683 bytes --]
[-- Attachment #2: lspci.ubuntu-2.6.27-9-generic --]
[-- Type: application/octet-stream, Size: 1904 bytes --]
00:00.0 Host bridge: Intel Corporation 82Q963/Q965 Memory Controller Hub (rev 02)
00:01.0 PCI bridge: Intel Corporation 82Q963/Q965 PCI Express Root Port (rev 02)
00:1a.0 USB Controller: Intel Corporation 82801H (ICH8 Family) USB UHCI Controller #4 (rev 02)
00:1a.1 USB Controller: Intel Corporation 82801H (ICH8 Family) USB UHCI Controller #5 (rev 02)
00:1a.7 USB Controller: Intel Corporation 82801H (ICH8 Family) USB2 EHCI Controller #2 (rev 02)
00:1b.0 Audio device: Intel Corporation 82801H (ICH8 Family) HD Audio Controller (rev 02)
00:1c.0 PCI bridge: Intel Corporation 82801H (ICH8 Family) PCI Express Port 1 (rev 02)
00:1c.4 PCI bridge: Intel Corporation 82801H (ICH8 Family) PCI Express Port 5 (rev 02)
00:1d.0 USB Controller: Intel Corporation 82801H (ICH8 Family) USB UHCI Controller #1 (rev 02)
00:1d.1 USB Controller: Intel Corporation 82801H (ICH8 Family) USB UHCI Controller #2 (rev 02)
00:1d.2 USB Controller: Intel Corporation 82801H (ICH8 Family) USB UHCI Controller #3 (rev 02)
00:1d.7 USB Controller: Intel Corporation 82801H (ICH8 Family) USB2 EHCI Controller #1 (rev 02)
00:1e.0 PCI bridge: Intel Corporation 82801 PCI Bridge (rev f2)
00:1f.0 ISA bridge: Intel Corporation 82801HB/HR (ICH8/R) LPC Interface Controller (rev 02)
00:1f.2 IDE interface: Intel Corporation 82801H (ICH8 Family) 4 port SATA IDE Controller (rev 02)
00:1f.3 SMBus: Intel Corporation 82801H (ICH8 Family) SMBus Controller (rev 02)
00:1f.5 IDE interface: Intel Corporation 82801H (ICH8 Family) 2 port SATA IDE Controller (rev 02)
01:00.0 VGA compatible controller: ATI Technologies Inc RV516 [Radeon X1300/X1550 Series]
01:00.1 Display controller: ATI Technologies Inc RV516 [Radeon X1300 Pro] (Secondary)
03:00.0 Ethernet controller: Broadcom Corporation NetXtreme BCM5754 Gigabit Ethernet PCI Express (rev 02)
04:02.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL-8169 Gigabit Ethernet (rev 10)
[-- Attachment #3: xenboot.testing2 --]
[-- Type: application/octet-stream, Size: 166227 bytes --]
__ __ _____ _ _ _ _ _
\ \/ /___ _ __ |___ /| || | _ _ _ __ ___| |_ __ _| |__ | | ___
\ // _ \ '_ \ |_ \| || |_ __| | | | '_ \/ __| __/ _` | '_ \| |/ _ \
/ \ __/ | | | ___) |__ _|__| |_| | | | \__ \ || (_| | |_) | | __/
/_/\_\___|_| |_| |____(_) |_| \__,_|_| |_|___/\__\__,_|_.__/|_|\___|
(XEN) Xen version 3.4-unstable (deshantm@) (gcc version 4.2.4 (Ubuntu 4.2.4-3ubuntu4)) Wed Nov 26 16:27:34 EST 2008
(XEN) Latest ChangeSet: Wed Nov 19 19:13:22 2008 +0000 18796:98d48f7680db
(XEN) Command line: loglvl=all guest_loglvl=all com1=115200,8n1 console=com1 nousb
(XEN) Video information:
(XEN) VGA is text mode 80x25, font 8x16
(XEN) VBE/DDC methods: V2; EDID transfer time: 1 seconds
(XEN) Disc information:
(XEN) Found 2 MBR signatures
(XEN) Found 2 EDD information structures
(XEN) Xen-e820 RAM map:
(XEN) 0000000000000000 - 000000000009fc00 (usable)
(XEN) 00000000000f0000 - 0000000000100000 (reserved)
(XEN) 0000000000100000 - 00000000cfdffc00 (usable)
(XEN) 00000000cfdffc00 - 00000000cfe01c00 (ACPI NVS)
(XEN) 00000000cfe03c00 - 00000000cfe53c00 (reserved)
(XEN) 00000000cfe53c00 - 00000000cfe55c00 (ACPI data)
(XEN) 00000000cfe55c00 - 00000000d0000000 (reserved)
(XEN) 00000000e0000000 - 00000000f0000000 (reserved)
(XEN) 00000000fec00000 - 00000000fed00400 (reserved)
(XEN) 00000000fed20000 - 00000000feda0000 (reserved)
(XEN) 00000000fee00000 - 00000000fef00000 (reserved)
(XEN) 00000000ffb00000 - 0000000100000000 (reserved)
(XEN) 0000000100000000 - 000000012c000000 (usable)
(XEN) System RAM: 4029MB (4126328kB)
(XEN) ACPI: RSDP 000FEBF0, 0024 (r2 DELL )
(XEN) ACPI: XSDT 000FCE97, 0084 (r1 DELL B8K 15 ASL 61)
(XEN) ACPI: FACP 000FCFBF, 00F4 (r3 DELL B8K 15 ASL 61)
(XEN) ACPI: DSDT FFF68960, 475F (r1 DELL dt_ex 1000 INTL 20050624)
(XEN) ACPI: FACS CFDFFC00, 0040
(XEN) ACPI: SSDT FFF6D397, 009A (r1 DELL st_ex 1000 INTL 20050624)
(XEN) ACPI: APIC 000FD0B3, 0092 (r1 DELL B8K 15 ASL 61)
(XEN) ACPI: BOOT 000FD145, 0028 (r1 DELL B8K 15 ASL 61)
(XEN) ACPI: ASF! 000FD16D, 0092 (r32 DELL B8K 15 ASL 61)
(XEN) ACPI: MCFG 000FD1FF, 003E (r1 DELL B8K 15 ASL 61)
(XEN) ACPI: HPET 000FD23D, 0038 (r1 DELL B8K 15 ASL 61)
(XEN) ACPI: TCPA 000FD499, 0032 (r1 DELL B8K 15 ASL 61)
(XEN) ACPI: SLIC 000FD275, 0176 (r1 DELL B8K 15 ASL 61)
(XEN) ACPI: SSDT CFDFFC40, 01F9 (r1 DpgPmm Cpu0Ist 11 INTL 20050624)
(XEN) ACPI: SSDT CFE00049, 01F9 (r1 DpgPmm Cpu1Ist 11 INTL 20050624)
(XEN) ACPI: SSDT CFE00452, 0140 (r1 DpgPmm CpuPm 10 INTL 20050624)
(XEN) NUMA turned off
(XEN) Faking a node at 0000000000000000-000000012c000000
(XEN) Xen heap: 14MB (14612kB)
(XEN) Domain heap initialised
(XEN) found SMP MP-table at 000fe710
(XEN) DMI 2.3 present.
(XEN) Using APIC driver default
(XEN) ACPI: PM-Timer IO Port: 0x808
(XEN) ACPI: ACPI SLEEP INFO: pm1x_cnt[804,0], pm1x_evt[800,0]
(XEN) ACPI: wakeup_vec[cfdffc0c], vec_size[20]
(XEN) ACPI: Local APIC address 0xfee00000
(XEN) ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
(XEN) Processor #0 6:15 APIC version 20
(XEN) ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled)
(XEN) Processor #1 6:15 APIC version 20
(XEN) ACPI: LAPIC (acpi_id[0x03] lapic_id[0x05] disabled)
(XEN) ACPI: LAPIC (acpi_id[0x04] lapic_id[0x07] disabled)
(XEN) ACPI: LAPIC (acpi_id[0x05] lapic_id[0x00] disabled)
(XEN) ACPI: LAPIC (acpi_id[0x06] lapic_id[0x01] disabled)
(XEN) ACPI: LAPIC (acpi_id[0x07] lapic_id[0x02] disabled)
(XEN) ACPI: LAPIC (acpi_id[0x08] lapic_id[0x03] disabled)
(XEN) ACPI: LAPIC_NMI (acpi_id[0xff] high level lint[0x1])
(XEN) ACPI: IOAPIC (id[0x08] address[0xfec00000] gsi_base[0])
(XEN) IOAPIC[0]: apic_id 8, version 32, address 0xfec00000, GSI 0-23
(XEN) ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
(XEN) ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
(XEN) ACPI: IRQ0 used by override.
(XEN) ACPI: IRQ2 used by override.
(XEN) ACPI: IRQ9 used by override.
(XEN) Enabling APIC mode: Flat. Using 1 I/O APICs
(XEN) ACPI: HPET id: 0x8086a201 base: 0xfed00000
(XEN) Using ACPI (MADT) for SMP configuration information
(XEN) Using scheduler: SMP Credit Scheduler (credit)
(XEN) Initializing CPU#0
(XEN) Detected 2394.038 MHz processor.
(XEN) CPU: L1 I cache: 32K, L1 D cache: 32K
(XEN) CPU: L2 cache: 4096K
(XEN) CPU: Physical Processor ID: 0
(XEN) CPU: Processor Core ID: 0
(XEN) HVM: VMX enabled
(XEN) CPU0: Intel(R) Core(TM)2 CPU 6600 @ 2.40GHz stepping 06
(XEN) Booting processor 1/1 eip 8c000
(XEN) Initializing CPU#1
(XEN) CPU: L1 I cache: 32K, L1 D cache: 32K
(XEN) CPU: L2 cache: 4096K
(XEN) CPU: Physical Processor ID: 0
(XEN) CPU: Processor Core ID: 1
(XEN) CPU1: Intel(R) Core(TM)2 CPU 6600 @ 2.40GHz stepping 06
(XEN) Total of 2 processors activated.
(XEN) ENABLING IO-APIC IRQs
(XEN) -> Using new ACK method
(XEN) ..TIMER: vector=0xF0 apic1=0 pin1=2 apic2=-1 pin2=-1
(XEN) checking TSC synchronization across 2 CPUs: passed.
(XEN) Platform timer is 14.318MHz HPET
(XEN) Brought up 2 CPUs
(XEN) I/O virtualisation disabled
(XEN) ACPI sleep modes: S3
(XEN) MCA: Machine check polling timer started.
(XEN) *** LOADING DOMAIN 0 ***
(XEN) Xen kernel: 64-bit, lsb, compat32
(XEN) Dom0 kernel: 64-bit, PAE, lsb, paddr 0x1000000 -> 0x19d72ec
(XEN) PHYSICAL MEMORY ARRANGEMENT:
(XEN) Dom0 alloc.: 0000000124000000->0000000128000000 (962060 pages to be allocated)
(XEN) VIRTUAL MEMORY ARRANGEMENT:
(XEN) Loaded kernel: ffffffff81000000->ffffffff819d72ec
(XEN) Init. ramdisk: ffffffff819d8000->ffffffff82408600
(XEN) Phys-Mach map: ffffffff82409000->ffffffff82b80060
(XEN) Start info: ffffffff82b81000->ffffffff82b814a4
(XEN) Page tables: ffffffff82b82000->ffffffff82b9d000
(XEN) Boot stack: ffffffff82b9d000->ffffffff82b9e000
(XEN) TOTAL: ffffffff80000000->ffffffff83000000
(XEN) ENTRY ADDRESS: ffffffff81826200
(XEN) Dom0 has maximum 2 VCPUs
(XEN) Scrubbing Free RAM: .done.
(XEN) Xen trace buffers: disabled
(XEN) Std. Loglevel: All
(XEN) Guest Loglevel: All
(XEN) *** Serial input -> DOM0 (type 'CTRL-a' three times to switch input to Xen)
(XEN) Freed 108kB init memory.
mapping kernel into physical memory
Xen: setup ISA identity maps
about to get started...
[ 0.000000] PAT disabled on Xen
[ 0.000000] Initializing cgroup subsys cpuset
[ 0.000000] Initializing cgroup subsys cpu
[ 0.000000] Linux version 2.6.28-rc6-tip (deshantm@xen-kvm) (gcc version 4.2.4 (Ubuntu 4.2.4-3ubuntu4)) #1 SMP Sat Nov 29 19:14:57 EST 2008
[ 0.000000] Command line: root=/dev/sda1 ro console=hvc0 earlyprintk=xen xencons=ttyS0,115200
[ 0.000000] KERNEL supported cpus:
[ 0.000000] Intel GenuineIntel
[ 0.000000] AMD AuthenticAMD
[ 0.000000] Centaur CentaurHauls
[ 0.000000] BIOS-provided physical RAM map:
[ 0.000000] Xen: 0000000000000000 - 00000000000a0000 (usable)
[ 0.000000] Xen: 00000000000a0000 - 0000000000100000 (reserved)
[ 0.000000] Xen: 0000000000100000 - 0000000002409000 (usable)
[ 0.000000] Xen: 0000000002409000 - 0000000002b82000 (reserved)
[ 0.000000] Xen: 0000000002b82000 - 00000000eee0c000 (usable)
[ 0.000000] console [xenboot0] enabled
[ 0.000000] DMI 2.3 present.
[ 0.000000] last_pfn = 0xeee0c max_arch_pfn = 0x3ffffffff
[ 0.000000] init_memory_mapping: 0000000000000000-00000000eee0c000
[ 0.000000] last_map_addr: eee0c000 end: eee0c000
[ 0.000000] RAMDISK: 019d8000 - 02408600
[ 0.000000] ACPI: RSDP 000FEBF0, 0024 (r2 DELL )
[ 0.000000] ACPI: XSDT 000FCE97, 0084 (r1 DELL B8K 15 ASL 61)
[ 0.000000] ACPI: FACP 000FCFBF, 00F4 (r3 DELL B8K 15 ASL 61)
[ 0.000000] ACPI: DSDT FFF68960, 475F (r1 DELL dt_ex 1000 INTL 20050624)
[ 0.000000] ACPI: FACS CFDFFC00, 0040
[ 0.000000] ACPI: SSDT FFF6D397, 009A (r1 DELL st_ex 1000 INTL 20050624)
[ 0.000000] ACPI: APIC 000FD0B3, 0092 (r1 DELL B8K 15 ASL 61)
[ 0.000000] ACPI: BOOT 000FD145, 0028 (r1 DELL B8K 15 ASL 61)
[ 0.000000] ACPI: ASF! 000FD16D, 0092 (r32 DELL B8K 15 ASL 61)
[ 0.000000] ACPI: MCFG 000FD1FF, 003E (r1 DELL B8K 15 ASL 61)
[ 0.000000] ACPI: HPET 000FD23D, 0038 (r1 DELL B8K 15 ASL 61)
[ 0.000000] ACPI: TCPA 000FD499, 0032 (r1 DELL B8K 15 ASL 61)
[ 0.000000] ACPI: SLIC 000FD275, 0176 (r1 DELL B8K 15 ASL 61)
[ 0.000000] ACPI: SSDT CFDFFC40, 01F9 (r1 DpgPmm Cpu0Ist 11 INTL 20050624)
[ 0.000000] ACPI: SSDT CFE00049, 01F9 (r1 DpgPmm Cpu1Ist 11 INTL 20050624)
[ 0.000000] ACPI: SSDT CFE00452, 0140 (r1 DpgPmm CpuPm 10 INTL 20050624)
[ 0.000000] No NUMA configuration found
[ 0.000000] Faking a node at 0000000000000000-00000000eee0c000
[ 0.000000] Bootmem setup node 0 0000000000000000-00000000eee0c000
[ 0.000000] NODE_DATA [0000000000001000 - 0000000000005fff]
[ 0.000000] bootmap [0000000000008000 - 0000000000025dc7] pages 1e
[ 0.000000] (6 early reservations) ==> bootmem [0000000000 - 00eee0c000]
[ 0.000000] #0 [0000000000 - 0000001000] BIOS data page ==> [0000000000 - 0000001000]
[ 0.000000] #1 [0000006000 - 0000008000] TRAMPOLINE ==> [0000006000 - 0000008000]
[ 0.000000] #2 [0002b82000 - 0002b9d000] XEN PAGETABLES ==> [0002b82000 - 0002b9d000]
[ 0.000000] #3 [0001000000 - 00019d72ec] TEXT DATA BSS ==> [0001000000 - 00019d72ec]
[ 0.000000] #4 [00019d8000 - 0002408600] RAMDISK ==> [00019d8000 - 0002408600]
[ 0.000000] #5 [0000100000 - 000085f000] PGTABLE ==> [0000100000 - 000085f000]
[ 0.000000] found SMP MP-table at [ffff8800000fe710] 000fe710
[ 0.000000] Zone PFN ranges:
[ 0.000000] DMA 0x00000000 -> 0x00001000
[ 0.000000] DMA32 0x00001000 -> 0x00100000
[ 0.000000] Normal 0x00100000 -> 0x00100000
[ 0.000000] Movable zone start PFN for each node
[ 0.000000] early_node_map[3] active PFN ranges
[ 0.000000] 0: 0x00000000 -> 0x000000a0
[ 0.000000] 0: 0x00000100 -> 0x00002409
[ 0.000000] 0: 0x00002b82 -> 0x000eee0c
[ 0.000000] ACPI: PM-Timer IO Port: 0x808
[ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x05] disabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x04] lapic_id[0x07] disabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x05] lapic_id[0x00] disabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x06] lapic_id[0x01] disabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x07] lapic_id[0x02] disabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x08] lapic_id[0x03] disabled)
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0xff] high level lint[0x1])
[ 0.000000] ACPI: IOAPIC (id[0x08] address[0xfec00000] gsi_base[0])
[ 0.000000] IOAPIC[0]: apic_id 8, version 0, address 0xfec00000, GSI 0-23
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[ 0.000000] ACPI: HPET id: 0x8086a201 base: 0xfed00000
[ 0.000000] Using ACPI (MADT) for SMP configuration information
[ 0.000000] SMP: Allowing 2 CPUs, 0 hotplug CPUs
(XEN) io_apic.c:2203:
(XEN) ioapic_guest_write: apic=0, pin=2, old_irq=0, new_irq=-1
(XEN) ioapic_guest_write: old_entry=000009f0, new_entry=00010900
(XEN) ioapic_guest_write: Attempt to remove IO-APIC pin of in-use IRQ!
(XEN) io_apic.c:2203:
(XEN) ioapic_guest_write: apic=0, pin=4, old_irq=4, new_irq=-1
(XEN) ioapic_guest_write: old_entry=000009f1, new_entry=00010900
(XEN) ioapic_guest_write: Attempt to remove IO-APIC pin of in-use IRQ!
[ 0.000000] PM: Registered nosave memory: 00000000000a0000 - 0000000000100000
[ 0.000000] PM: Registered nosave memory: 0000000002409000 - 0000000002b82000
[ 0.000000] Allocating PCI resources starting at f0000000 (gap: eee0c000:111f4000)
[ 0.000000] PERCPU: Allocating 65536 bytes of per cpu data
[ 0.000000] Built 1 zonelists in Node order, mobility grouping on. Total pages: 961165
[ 0.000000] Policy zone: DMA32
[ 0.000000] Kernel command line: root=/dev/sda1 ro console=hvc0 earlyprintk=xen xencons=ttyS0,115200
[ 0.000000] Initializing CPU#0
[ 0.000000] xen: allocated irq 9 for acpi 9
[ 0.000000] PID hash table entries: 4096 (order: 12, 32768 bytes)
[ 0.000000] Detected 2394.038 MHz processor.
[ 0.000999] Console: colour dummy device 80x25
[ 0.000999] console handover: boot [xenboot0] -> real [hvc0]
[ 0.000999] Checking aperture...
[ 0.000999] No AGP bridge found
[ 0.000999] PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
[ 0.000999] Placing software IO TLB between 0x1c0000 - 0x11df3c000
[ 0.000999] Memory: 3757400k/3913776k available (4742k kernel code, 8036k absent, 148340k reserved, 3080k data, 604k init)
[ 0.000999] SLUB: Genslabs=13, HWalign=64, Order=0-3, MinObjects=0, CPUs=2, Nodes=1
[ 0.000999] installing Xen timer for CPU 0
[ 0.000999] Calibrating delay loop (skipped), value calculated using timer frequency.. 4788.07 BogoMIPS (lpj=2394038)
[ 0.000999] Security Framework initialized
[ 0.000999] SELinux: Initializing.
[ 0.000999] Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes)
[ 0.003085] Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes)
[ 0.004048] Mount-cache hash table entries: 256
[ 0.004215] Initializing cgroup subsys ns
[ 0.004223] Initializing cgroup subsys cpuacct
[ 0.004260] CPU: L1 I cache: 32K, L1 D cache: 32K
[ 0.004265] CPU: L2 cache: 4096K
[ 0.004270] CPU 0/0x0 -> Node 0
[ 0.004273] CPU: Physical Processor ID: 0
[ 0.004276] CPU: Processor Core ID: 0
[ 0.004288] SMP alternatives: switching to UP code
[ 0.031884] ACPI: Core revision 20080926
[ 0.235955] cpu 0 spinlock event irq 17
[ 0.236052] installing Xen timer for CPU 1
[ 0.236062] cpu 1 spinlock event irq 23
[ 0.236089] SMP alternatives: switching to SMP code
[ 0.000009] Initializing CPU#1
[ 0.000053] CPU: L1 I cache: 32K, L1 D cache: 32K
[ 0.000055] CPU: L2 cache: 4096K
[ 0.000058] CPU 1/0x0 -> Node 0
[ 0.000059] CPU: Physical Processor ID: 0
[ 0.000060] CPU: Processor Core ID: 0
[ 0.272270] Brought up 2 CPUs
[ 0.272434] khelper used greatest stack depth: 6344 bytes left
[ 0.272645] net_namespace: 1344 bytes
[ 0.272652] Booting paravirtualized kernel on Xen
[ 0.272655] Xen version: 3.4-unstable (preserve-AD) (dom0)
[ 0.272830] Grant table initialized
[ 0.272861] Time: 2:24:27 Date: 12/02/08
[ 0.272892] NET: Registered protocol family 16
[ 0.273300] khelper used greatest stack depth: 5944 bytes left
[ 0.273300] ACPI FADT declares the system doesn't support PCIe ASPM, so disable it
[ 0.273300] ACPI: bus type pci registered
[ 0.273300] PCI: MCFG configuration 0: base e0000000 segment 0 buses 0 - 255
[ 0.273300] PCI: Not using MMCONFIG.
[ 0.273300] PCI: Using configuration type 1 for base access
[ 0.332989] ACPI: BIOS _OSI(Linux) query ignored
[ 0.332994] ACPI: DMI System Vendor: Dell Inc.
[ 0.332998] ACPI: DMI Product Name: OptiPlex 745
[ 0.333002] ACPI: DMI Product Version:
[ 0.333005] ACPI: DMI Board Name: 0HR330
[ 0.333008] ACPI: DMI BIOS Vendor: Dell Inc.
[ 0.333012] ACPI: DMI BIOS Date: 12/06/2007
[ 0.333014] ACPI: Please send DMI info above to linux-acpi@vger.kernel.org
[ 0.333019] ACPI: If "acpi_osi=Linux" works better, please notify linux-acpi@vger.kernel.org
[ 0.352790] ACPI: Interpreter enabled
[ 0.352794] ACPI: (supports S0 S3 S4 S5)
[ 0.352814] ACPI: Using IOAPIC for interrupt routing
[ 0.352928] PCI: MCFG configuration 0: base e0000000 segment 0 buses 0 - 255
[ 0.416767] PCI: MCFG area at e0000000 reserved in ACPI motherboard resources
[ 0.416773] resource map sanity check conflict: 0xe0000000 0xefffffff 0x2b82000 0xeee0bfff System RAM
[ 0.416783] ------------[ cut here ]------------
[ 0.416787] WARNING: at arch/x86/mm/ioremap.c:226 __ioremap_caller+0xc7/0x28d()
[ 0.416791] Modules linked in:
[ 0.416795] Pid: 1, comm: swapper Not tainted 2.6.28-rc6-tip #1
[ 0.416800] Call Trace:
[ 0.416806] [<ffffffff81042d44>] warn_on_slowpath+0x58/0x75
[ 0.416813] [<ffffffff811e98b8>] ? acpi_ut_acquire_mutex+0x3e/0x92
[ 0.416818] [<ffffffff81043a34>] ? printk+0x67/0x69
[ 0.416823] [<ffffffff81048bae>] ? iomem_map_sanity_check+0x87/0xb9
[ 0.416829] [<ffffffff811e97a9>] ? acpi_ut_release_mutex+0x5d/0x61
[ 0.416834] [<ffffffff8102fb07>] __ioremap_caller+0xc7/0x28d
[ 0.416841] [<ffffffff818552f6>] ? pci_mmcfg_arch_init+0x90/0x11d
[ 0.416847] [<ffffffff810b49ce>] ? __kmalloc+0xaa/0xd1
[ 0.416852] [<ffffffff8102fda2>] ioremap_nocache+0x12/0x14
[ 0.416856] [<ffffffff818552f6>] pci_mmcfg_arch_init+0x90/0x11d
[ 0.416862] [<ffffffff81855de0>] __pci_mmcfg_init+0x267/0x298
[ 0.416868] [<ffffffff8184b93c>] ? acpi_init+0x0/0x239
[ 0.416872] [<ffffffff8184b93c>] ? acpi_init+0x0/0x239
[ 0.416877] [<ffffffff81855e1c>] pci_mmcfg_late_init+0xb/0xd
[ 0.416882] [<ffffffff8184bad8>] acpi_init+0x19c/0x239
[ 0.416887] [<ffffffff8184a212>] ? fbmem_init+0x0/0x91
[ 0.416892] [<ffffffff8100a056>] do_one_initcall+0x56/0x138
[ 0.416897] [<ffffffff81082989>] ? register_irq_proc+0xa1/0xbd
[ 0.416904] [<ffffffff810f0000>] ? load_elf_binary+0x1341/0x1805
[ 0.416910] [<ffffffff8182698e>] kernel_init+0x12c/0x180
[ 0.416916] [<ffffffff81012619>] child_rip+0xa/0x21
[ 0.416921] [<ffffffff81011f2d>] ? retint_restore_args+0x5/0x20
[ 0.416926] [<ffffffff8101260f>] ? child_rip+0x0/0x21
[ 0.416934] ---[ end trace 4eaa2a86a8e2da22 ]---
[ 0.416938] PCI: Cannot map mmconfig aperture for segment 0
[ 0.506957] ACPI: ACPI Dock Station Driver: 1 docks/bays found
[ 0.506971] ACPI: PCI Root Bridge [PCI0] (0000:00)
[ 0.507108] pci 0000:00:01.0: PME# supported from D0 D3hot D3cold
[ 0.507116] pci 0000:00:01.0: PME# disabled
[ 0.507457] pci 0000:00:1a.7: PME# supported from D0 D3hot D3cold
[ 0.507465] pci 0000:00:1a.7: PME# disabled
[ 0.507581] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
[ 0.507589] pci 0000:00:1b.0: PME# disabled
[ 0.507669] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
[ 0.507677] pci 0000:00:1c.0: PME# disabled
[ 0.507765] pci 0000:00:1c.4: PME# supported from D0 D3hot D3cold
[ 0.507772] pci 0000:00:1c.4: PME# disabled
[ 0.508223] pci 0000:00:1d.7: PME# supported from D0 D3hot D3cold
[ 0.508232] pci 0000:00:1d.7: PME# disabled
[ 0.508416] pci 0000:00:1f.0: quirk: region 0800-087f claimed by ICH6 ACPI/GPIO/TCO
[ 0.508423] pci 0000:00:1f.0: quirk: region 0880-08bf claimed by ICH6 GPIO
[ 0.508551] pci 0000:00:1f.2: PME# supported from D3hot
[ 0.508558] pci 0000:00:1f.2: PME# disabled
[ 0.508753] pci 0000:00:1f.5: PME# supported from D3hot
[ 0.508760] pci 0000:00:1f.5: PME# disabled
[ 0.509259] pci 0000:03:00.0: PME# supported from D3hot D3cold
[ 0.509268] pci 0000:03:00.0: PME# disabled
[ 0.509506] pci 0000:04:02.0: PME# supported from D1 D2 D3hot D3cold
[ 0.509514] pci 0000:04:02.0: PME# disabled
[ 0.509584] pci 0000:00:1e.0: transparent bridge
[ 1.403557] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 9 10 *11 12 15)
[ 1.404695] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 9 *10 11 12 15)
[ 1.405460] ACPI: PCI Interrupt Link [LNKC] (IRQs *3 4 5 6 7 9 10 11 12 15)
[ 1.406196] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 9 10 11 12 15) *0, disabled.
[ 1.406976] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 *9 10 11 12 15)
[ 1.407786] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 9 10 11 12 15) *0, disabled.
[ 1.408524] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 7 *9 10 11 12 15)
[ 1.409285] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 *5 6 7 9 10 11 12 15)
[ 1.409503] ACPI Warning (tbutils-0217): Incorrect checksum in table [TCPA] - 00, should be 88 [20080926]
[ 1.409503] xen_balloon: Initialising balloon driver.
[ 1.410017] SCSI subsystem initialized
[ 1.410046] usbcore: registered new interface driver usbfs
[ 1.410046] usbcore: registered new interface driver hub
[ 1.410046] usbcore: registered new device driver usb
[ 1.410999] PCI: Using ACPI for IRQ routing
[ 1.410999] pci 0000:00:01.0: BAR 9: can't allocate resource
[ 1.411016] pci 0000:01:00.0: BAR 0: can't allocate resource
[ 1.418002] cfg80211: Using static regulatory domain info
[ 1.418002] cfg80211: Regulatory domain: US
[ 1.418002] (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
[ 1.418002] (2402000 KHz - 2472000 KHz @ 40000 KHz), (600 mBi, 2700 mBm)
[ 1.418002] (5170000 KHz - 5190000 KHz @ 40000 KHz), (600 mBi, 2300 mBm)
[ 1.418002] (5190000 KHz - 5210000 KHz @ 40000 KHz), (600 mBi, 2300 mBm)
[ 1.418002] (5210000 KHz - 5230000 KHz @ 40000 KHz), (600 mBi, 2300 mBm)
[ 1.418004] (5230000 KHz - 5330000 KHz @ 40000 KHz), (600 mBi, 2300 mBm)
[ 1.418010] (5735000 KHz - 5835000 KHz @ 40000 KHz), (600 mBi, 3000 mBm)
[ 1.418017] cfg80211: Calling CRDA for country: US
[ 1.418039] NetLabel: Initializing
[ 1.418039] NetLabel: domain hash size = 128
[ 1.418039] NetLabel: protocols = UNLABELED CIPSOv4
[ 1.418039] NetLabel: unlabeled traffic allowed by default
[ 1.418039] Xen: Initializing Xen DMA ops
[ 1.418039] Xen: Enabling DMA fallback to swiotlb
[ 1.418039] PCI-GART: No AMD GART found.
[ 1.421154] pnp: PnP ACPI init
[ 1.421171] ACPI: bus type pnp registered
[ 1.434273] pnp 00:01: io resource (0x800-0x85f) overlaps 0000:00:1f.0 BAR 7 (0x800-0x87f), disabling
[ 1.434279] pnp 00:01: io resource (0x860-0x8ff) overlaps 0000:00:1f.0 BAR 7 (0x800-0x87f), disabling
[ 1.434564] system 00:01: ioport range 0xc00-0xc7f has been reserved
[ 1.435207] xen_set_ioapic_routing: irq 13 gsi 13 vector 112 ioapic 0 pin 13 triggering 1 polarity 0
[ 1.435879] xen_set_ioapic_routing: irq 8 gsi 8 vector 72 ioapic 0 pin 8 triggering 1 polarity 0
[ 1.453113] xen_set_ioapic_routing: irq 4 gsi 4 vector 241 ioapic 0 pin 4 triggering 1 polarity 0
(XEN) io_apic.c:2216:
(XEN) ioapic_guest_write: apic=0, pin=4, old_irq=4, new_irq=4
(XEN) ioapic_guest_write: old_entry=000009f1, new_entry=000189f1
(XEN) ioapic_guest_write: Attempt to modify IO-APIC pin for in-use IRQ!
[ 1.476966] pnp 00:07: mem resource (0x0-0x9ffff) overlaps 0000:01:00.0 BAR 0 (0x0-0xfffffff), disabling
[ 1.476973] pnp 00:07: mem resource (0x100000-0xffffff) overlaps 0000:01:00.0 BAR 0 (0x0-0xfffffff), disabling
[ 1.476980] pnp 00:07: mem resource (0x1000000-0xcfdffbff) overlaps 0000:01:00.0 BAR 0 (0x0-0xfffffff), disabling
[ 1.476986] pnp 00:07: mem resource (0xf0000-0xfffff) overlaps 0000:01:00.0 BAR 0 (0x0-0xfffffff), disabling
[ 1.476992] pnp 00:07: mem resource (0xc0000-0xcffff) overlaps 0000:01:00.0 BAR 0 (0x0-0xfffffff), disabling
[ 1.477256] system 00:07: iomem range 0xfec00000-0xfecfffff has been reserved
[ 1.477262] system 00:07: iomem range 0xfee00000-0xfeefffff has been reserved
[ 1.477267] system 00:07: iomem range 0xffb00000-0xffbfffff has been reserved
[ 1.477272] system 00:07: iomem range 0xffc00000-0xffffffff has been reserved
[ 1.481612] system 00:08: ioport range 0x100-0x1fe has been reserved
[ 1.481618] system 00:08: ioport range 0x200-0x277 has been reserved
[ 1.481622] system 00:08: ioport range 0x280-0x2e7 has been reserved
[ 1.481627] system 00:08: ioport range 0x2f0-0x2f7 has been reserved
[ 1.481631] system 00:08: ioport range 0x300-0x377 has been reserved
[ 1.481636] system 00:08: ioport range 0x380-0x3bb has been reserved
[ 1.481641] system 00:08: ioport range 0x3c0-0x3e7 has been reserved
[ 1.481645] system 00:08: ioport range 0x3f6-0x3f7 has been reserved
[ 1.481650] system 00:08: ioport range 0x400-0x4cf has been reserved
[ 1.481654] system 00:08: ioport range 0x4d2-0x57f has been reserved
[ 1.481659] system 00:08: ioport range 0x580-0x677 has been reserved
[ 1.481663] system 00:08: ioport range 0x680-0x777 has been reserved
[ 1.481668] system 00:08: ioport range 0x780-0x7bb has been reserved
[ 1.481672] system 00:08: ioport range 0x7c0-0x7ff has been reserved
[ 1.481677] system 00:08: ioport range 0x8e0-0x8ff has been reserved
[ 1.481682] system 00:08: ioport range 0x900-0x9fe has been reserved
[ 1.481686] system 00:08: ioport range 0xa00-0xafe has been reserved
[ 1.481691] system 00:08: ioport range 0xb00-0xbfe has been reserved
[ 1.481696] system 00:08: ioport range 0xc80-0xcaf has been reserved
[ 1.481700] system 00:08: ioport range 0xcc0-0xcf7 has been reserved
[ 1.481705] system 00:08: ioport range 0xd00-0xdfe has been reserved
[ 1.481709] system 00:08: ioport range 0xe00-0xefe has been reserved
[ 1.481714] system 00:08: ioport range 0xf00-0xffe has been reserved
[ 1.481719] system 00:08: ioport range 0x2000-0x20fe has been reserved
[ 1.481723] system 00:08: ioport range 0x2100-0x21fe has been reserved
[ 1.481728] system 00:08: ioport range 0x2200-0x22fe has been reserved
[ 1.481733] system 00:08: ioport range 0x2300-0x23fe has been reserved
[ 1.481737] system 00:08: ioport range 0x2400-0x24fe has been reserved
[ 1.481742] system 00:08: ioport range 0x2500-0x25fe has been reserved
[ 1.481747] system 00:08: ioport range 0x2600-0x26fe has been reserved
[ 1.481752] system 00:08: ioport range 0x2700-0x27fe has been reserved
[ 1.481756] system 00:08: ioport range 0x2800-0x28fe has been reserved
[ 1.481761] system 00:08: ioport range 0x2900-0x29fe has been reserved
[ 1.481766] system 00:08: ioport range 0x2a00-0x2afe has been reserved
[ 1.481770] system 00:08: ioport range 0x2b00-0x2bfe has been reserved
[ 1.481775] system 00:08: ioport range 0x2c00-0x2cfe has been reserved
[ 1.481780] system 00:08: ioport range 0x2d00-0x2dfe has been reserved
[ 1.481786] system 00:08: ioport range 0x2e00-0x2efe has been reserved
[ 1.481791] system 00:08: ioport range 0x2f00-0x2ffe has been reserved
[ 1.481796] system 00:08: ioport range 0x5000-0x50fe has been reserved
[ 1.481800] system 00:08: ioport range 0x5100-0x51fe has been reserved
[ 1.481805] system 00:08: ioport range 0x5200-0x52fe has been reserved
[ 1.481810] system 00:08: ioport range 0x5300-0x53fe has been reserved
[ 1.481815] system 00:08: ioport range 0x5400-0x54fe has been reserved
[ 1.481820] system 00:08: ioport range 0x5500-0x55fe has been reserved
[ 1.481824] system 00:08: ioport range 0x5600-0x56fe has been reserved
[ 1.481829] system 00:08: ioport range 0x5700-0x57fe has been reserved
[ 1.481834] system 00:08: ioport range 0x5800-0x58fe has been reserved
[ 1.481839] system 00:08: ioport range 0x5900-0x59fe has been reserved
[ 1.481844] system 00:08: ioport range 0x5a00-0x5afe has been reserved
[ 1.481848] system 00:08: ioport range 0x5b00-0x5bfe has been reserved
[ 1.481853] system 00:08: ioport range 0x5c00-0x5cfe has been reserved
[ 1.481858] system 00:08: ioport range 0x5d00-0x5dfe has been reserved
[ 1.481863] system 00:08: ioport range 0x5e00-0x5efe has been reserved
[ 1.481868] system 00:08: ioport range 0x5f00-0x5ffe has been reserved
[ 1.481872] system 00:08: ioport range 0x6000-0x60fe has been reserved
[ 1.481877] system 00:08: ioport range 0x6100-0x61fe has been reserved
[ 1.481882] system 00:08: ioport range 0x6200-0x62fe has been reserved
[ 1.481887] system 00:08: ioport range 0x6300-0x63fe has been reserved
[ 1.481892] system 00:08: ioport range 0x6400-0x64fe has been reserved
[ 1.481896] system 00:08: ioport range 0x6500-0x65fe has been reserved
[ 1.481901] system 00:08: ioport range 0x6600-0x66fe has been reserved
[ 1.481906] system 00:08: ioport range 0x6700-0x67fe has been reserved
[ 1.481911] system 00:08: ioport range 0x6800-0x68fe has been reserved
[ 1.481916] system 00:08: ioport range 0x6900-0x69fe has been reserved
[ 1.481921] system 00:08: ioport range 0x6a00-0x6afe has been reserved
[ 1.482679] system 00:08: ioport range 0x6b00-0x6bfe has been reserved
[ 1.489600] system 00:08: ioport range 0x6c00-0x6cfe has been reserved
[ 1.495140] system 00:08: ioport range 0x6d00-0x6dfe has been reserved
[ 1.502065] system 00:08: ioport range 0x6e00-0x6efe has been reserved
[ 1.508985] system 00:08: ioport range 0x6f00-0x6ffe has been reserved
[ 1.515910] system 00:08: ioport range 0xa000-0xa0fe has been reserved
[ 1.521448] system 00:08: ioport range 0xa100-0xa1fe has been reserved
[ 1.528372] system 00:08: ioport range 0xa200-0xa2fe has been reserved
[ 1.535295] system 00:08: ioport range 0xa300-0xa3fe has been reserved
[ 1.542220] system 00:08: ioport range 0xa400-0xa4fe has been reserved
[ 1.547758] system 00:08: ioport range 0xa500-0xa5fe has been reserved
[ 1.554682] system 00:08: ioport range 0xa600-0xa6fe has been reserved
[ 1.561605] system 00:08: ioport range 0xa700-0xa7fe has been reserved
[ 1.568527] system 00:08: ioport range 0xa800-0xa8fe has been reserved
[ 1.574068] system 00:08: ioport range 0xa900-0xa9fe has been reserved
[ 1.580989] system 00:08: ioport range 0xaa00-0xaafe has been reserved
[ 1.587915] system 00:08: ioport range 0xab00-0xabfe has been reserved
[ 1.594838] system 00:08: ioport range 0xac00-0xacfe has been reserved
[ 1.600377] system 00:08: ioport range 0xad00-0xadfe has been reserved
[ 1.607299] system 00:08: ioport range 0xae00-0xaefe has been reserved
[ 1.614222] system 00:08: ioport range 0xaf00-0xaffe has been reserved
[ 1.621147] system 00:08: iomem range 0xe0000000-0xefffffff could not be reserved
[ 1.628069] system 00:08: iomem range 0xfeda0000-0xfedacfff has been reserved
[ 1.636673] pnp: PnP ACPI: found 10 devices
[ 1.639148] ACPI: ACPI bus type pnp unregistered
[ 1.650146] pci 0000:00:01.0: PCI bridge, secondary bus 0000:01
[ 1.651611] pci 0000:00:01.0: IO window: 0xd000-0xdfff
[ 1.655768] pci 0000:00:01.0: MEM window: 0xfe900000-0xfeafffff
[ 1.662689] pci 0000:00:01.0: PREFETCH window: 0x00000100000000-0x0000010fffffff
[ 1.669616] pci 0000:00:1c.0: PCI bridge, secondary bus 0000:02
[ 1.676535] pci 0000:00:1c.0: IO window: disabled
[ 1.680694] pci 0000:00:1c.0: MEM window: 0xfe800000-0xfe8fffff
[ 1.687614] pci 0000:00:1c.0: PREFETCH window: disabled
[ 1.691773] pci 0000:00:1c.4: PCI bridge, secondary bus 0000:03
[ 1.698688] pci 0000:00:1c.4: IO window: disabled
[ 1.702849] pci 0000:00:1c.4: MEM window: 0xfe700000-0xfe7fffff
[ 1.709770] pci 0000:00:1c.4: PREFETCH window: disabled
[ 1.713929] pci 0000:00:1e.0: PCI bridge, secondary bus 0000:04
[ 1.720848] pci 0000:00:1e.0: IO window: 0xc000-0xcfff
[ 1.725004] pci 0000:00:1e.0: MEM window: 0xfe500000-0xfe6fffff
[ 1.731927] pci 0000:00:1e.0: PREFETCH window: 0x000000f0000000-0x000000f00fffff
[ 1.740255] xen_set_ioapic_routing: irq 29 gsi 16 vector 144 ioapic 0 pin 16 triggering 0 polarity 1
[ 1.748541] pci 0000:00:01.0: PCI INT A -> GSI 16 (level, low) -> IRQ 29
[ 1.755463] xen: PCI device 0000:00:01.0 pin 1 -> irq 29
[ 1.761017] xen_allocate_pirq: returning irq 29 for gsi 16
[ 1.766542] xen_set_ioapic_routing: irq 29 gsi 16 vector 144 ioapic 0 pin 16 triggering 0 polarity 1
[ 1.776235] pci 0000:00:1c.0: PCI INT A -> GSI 16 (level, low) -> IRQ 29
[ 1.781771] xen: PCI device 0000:00:1c.0 pin 1 -> irq 29
[ 1.787327] xen_allocate_pirq: returning irq 29 for gsi 16
[ 1.792849] xen_set_ioapic_routing: irq 29 gsi 16 vector 144 ioapic 0 pin 16 triggering 0 polarity 1
[ 1.802545] pci 0000:00:1c.4: PCI INT A -> GSI 16 (level, low) -> IRQ 29
[ 1.809465] xen: PCI device 0000:00:1c.4 pin 1 -> irq 29
[ 1.815024] bus: 00 index 0 io port: [0x00-0xffff]
[ 1.819158] bus: 00 index 1 mmio: [0x000000-0xffffffffffffffff]
[ 1.826082] bus: 01 index 0 io port: [0xd000-0xdfff]
[ 1.830235] bus: 01 index 1 mmio: [0xfe900000-0xfeafffff]
[ 1.835775] bus: 01 index 2 mmio: [0x100000000-0x10fffffff]
[ 1.841312] bus: 01 index 3 mmio: [0x0-0x0]
[ 1.845467] bus: 02 index 0 mmio: [0x0-0x0]
[ 1.849622] bus: 02 index 1 mmio: [0xfe800000-0xfe8fffff]
[ 1.855160] bus: 02 index 2 mmio: [0x0-0x0]
[ 1.859315] bus: 02 index 3 mmio: [0x0-0x0]
[ 1.863469] bus: 03 index 0 mmio: [0x0-0x0]
[ 1.867622] bus: 03 index 1 mmio: [0xfe700000-0xfe7fffff]
[ 1.873161] bus: 03 index 2 mmio: [0x0-0x0]
[ 1.877314] bus: 03 index 3 mmio: [0x0-0x0]
[ 1.881470] bus: 04 index 0 io port: [0xc000-0xcfff]
[ 1.887010] bus: 04 index 1 mmio: [0xfe500000-0xfe6fffff]
[ 1.892546] bus: 04 index 2 mmio: [0xf0000000-0xf00fffff]
[ 1.898086] bus: 04 index 3 io port: [0x00-0xffff]
[ 1.903624] bus: 04 index 4 mmio: [0x000000-0xffffffffffffffff]
[ 1.909171] NET: Registered protocol family 2
[ 1.923360] IP route cache hash table entries: 131072 (order: 8, 1048576 bytes)
[ 1.925653] TCP established hash table entries: 524288 (order: 11, 8388608 bytes)
[ 1.932664] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
[ 1.934586] TCP: Hash tables configured (established 524288 bind 65536)
[ 1.941012] TCP reno registered
[ 1.948181] NET: Registered protocol family 1
[ 1.949438] checking if image is initramfs... it is
[ 1.966250] Freeing initrd memory: 10433k freed
[ 1.971522] Simple Boot Flag at 0x7a set to 0x1
(XEN) traps.c:2193:d0 Domain attempted WRMSR 000000000000008b from 000000c6:00000000 to 00000000:00000000.
(XEN) traps.c:2193:d0 Domain attempted WRMSR 000000000000008b from 000000c6:00000000 to 00000000:00000000.
[ 1.972899] Microcode Update Driver: v2.00 <tigran@aivazian.fsnet.co.uk>, Peter Oruba
[ 1.989822] audit: initializing netlink socket (disabled)
[ 1.995032] type=2000 audit(1228184670.088:1): initialized
[ 2.008203] HugeTLB registered 2 MB page size, pre-allocated 0 pages
[ 2.011573] VFS: Disk quotas dquot_6.5.1
[ 2.011721] Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[ 2.018396] msgmni has been set to 7664
[ 2.021956] alg: No test for stdrng (krng)
[ 2.025617] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252)
[ 2.033788] io scheduler noop registered
[ 2.036555] io scheduler anticipatory registered
[ 2.042095] io scheduler deadline registered
[ 2.047775] io scheduler cfq registered (default)
[ 2.120498] pcieport-driver 0000:00:01.0: found MSI capability
[ 2.120742] pcieport-driver 0000:00:1c.0: found MSI capability
[ 2.121038] pcieport-driver 0000:00:1c.4: found MSI capability
[ 2.121478] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[ 2.121731] input: Power Button (FF) as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input0
[ 2.121737] ACPI: Power Button (FF) [PWRF]
[ 2.121829] input: Power Button (CM) as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input1
[ 2.121834] ACPI: Power Button (CM) [VBTN]
[ 2.232158] Event-channel device installed.
[ 2.232162] ***blkif_init
[ 2.246502] hpet_acpi_add: no address or irqs in _CRS
[ 2.246618] Non-volatile memory driver v1.2
[ 2.246621] Linux agpgart interface v0.103
[ 2.246762] [drm] Initialized drm 1.1.0 20060810
[ 2.246825] Serial: 8250/16550 driver4 ports, IRQ sharing enabled
[ 2.249670] brd: module loaded
[ 2.250680] loop: module loaded
[ 2.250736] Intel(R) PRO/1000 Network Driver - version 7.3.20-k3-NAPI
[ 2.250740] Copyright (c) 1999-2006 Intel Corporation.
[ 2.250805] e100: Intel(R) PRO/100 Network Driver, 3.5.23-k6-NAPI
[ 2.250809] e100: Copyright(c) 1999-2006 Intel Corporation
[ 2.250882] tg3.c:v3.94 (August 14, 2008)
[ 2.250902] vendor=8086 device=2847
[ 2.250908] xen_allocate_pirq: returning irq 29 for gsi 16
[ 2.250913] xen_set_ioapic_routing: irq 29 gsi 16 vector 144 ioapic 0 pin 16 triggering 0 polarity 1
[ 2.250923] tg3 0000:03:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 29
[ 2.250928] xen: PCI device 0000:03:00.0 pin 1 -> irq 29
[ 2.261075] eth0: Tigon3 [partno(BCM95754) rev b002 PHY(5787)] (PCI Express) 10/100/1000Base-T Ethernet 00:1a:a0:a9:f2:81
[ 2.261082] eth0: RXcsums[1] LinkChgREG[0] MIirq[0] ASF[0] WireSpeed[1] TSOcap[1]
[ 2.261087] eth0: dma_rwctrl[76180000] dma_mask[64-bit]
[ 2.261140] sky2 driver version 1.22
[ 2.261421] console [netcon0] enabled
[ 2.261425] netconsole: network logging started
[ 2.261599] input: Macintosh mouse button emulation as /devices/virtual/input/input2
[ 2.261711] Loading iSCSI transport class v2.0-870.
[ 2.262079] Driver 'sd' needs updating - please use bus_type methods
[ 2.262207] Driver 'sr' needs updating - please use bus_type methods
[ 2.267926] xen_set_ioapic_routing: irq 31 gsi 20 vector 152 ioapic 0 pin 20 triggering 0 polarity 1
[ 2.277404] ata_piix 0000:00:1f.2: PCI INT C -> GSI 20 (level, low) -> IRQ 31
[ 2.285709] xen: PCI device 0000:00:1f.2 pin 3 -> irq 31
[ 2.289864] ata_piix 0000:00:1f.2: MAP [ P0 P2 P1 P3 ]
[ 2.446246] scsi0 : ata_piix
[ 2.446474] scsi1 : ata_piix
[ 2.446577] BUG: unable to handle kernel NULL pointer dereference at 0000000000000000
[ 2.446584] IP: [<0000000000000000>] 0x0
[ 2.446590] PGD 0
[ 2.446593] Oops: 0010 [#1] SMP
[ 2.446597] last sysfs file:
[ 2.446600] CPU 0
[ 2.446603] Modules linked in:
[ 2.446607] Pid: 630, comm: khelper Tainted: G W 2.6.28-rc6-tip #1
[ 2.446612] RIP: 0010:[<0000000000000000>] [<0000000000000000>] 0x0
[ 2.446617] RSP: 001b:ffff8800ec5b9f48 EFLAGS: 00010202
[ 2.446621] RAX: 0000000000000000 RBX: ffffffff81011f2d RCX: 0000000000000000
[ 2.446625] RDX: 0000000000000000 RSI: 0000000000000001 RDI: 0000000000000001
[ 2.446630] RBP: ffff8800ee75fe80 R08: ffff8800ee75e000 R09: 0000000100000000
[ 2.446634] R10: ffff880002bd8c00 R11: 0000000000000001 R12: ffff88008130c000
[ 2.446639] R13: ffffffff81862d20 R14: ffffffff816d2020 R15: ffff8800ec5b8000
[ 2.446647] FS: 0000000000000000(0000) GS:ffffffff817f1a00(0000) knlGS:0000000000000000
[ 2.446652] CS: e033 DS: 0000 ES: 0000 CR0: 000000008005003b
[ 2.446656] CR2: 0000000000000000 CR3: 0000000001001000 CR4: 0000000000002620
[ 2.446661] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
[ 2.446666] DR3: 0000000000000000 DR6: 00000000ffff0ff0 DR7: 0000000000000400
[ 2.446670] Process khelper (pid: 630, threadinfo ffff8800ec5b8000, task ffff8800ee77e660)
[ 2.446675] Stack:
[ 2.446677] ffffffff81012619 0000000000000000 ffff8800ec5b8000 ffffffff816d2020
[ 2.446683] ffffffff81862d20 ffff88008130c000 ffff8800ee75fe80 ffffffff81011f2d
[ 2.446691] 0000000000000001 ffff880002bd8c00 0000000100000000 ffff8800ee75e000
[ 2.447569] Call Trace:
[ 2.447569] [<ffffffff81012619>] ? child_rip+0xa/0x21
[ 2.447569] [<ffffffff81011f2d>] ? retint_restore_args+0x5/0x20
[ 2.447569] [<ffffffff8101260f>] ? child_rip+0x0/0x21
[ 2.447569] Code: Bad RIP value.
[ 2.447569] RIP [<0000000000000000>] 0x0
[ 2.447569] RSP <ffff8800ec5b9f48>
[ 2.447569] CR2: 0000000000000000
[ 2.482342] ---[ end trace 4eaa2a86a8e2da22 ]---
[ 2.487882] k __ __ _____ _ _ _ _ _
\ \/ /___ _ __ |___ /| || | _ _ _ __ ___| |_ __ _| |__ | | ___
\ // _ \ '_ \ |_ \| || |_ __| | | | '_ \/ __| __/ _` | '_ \| |/ _ \
/ \ __/ | | | ___) |__ _|__| |_| | | | \__ \ || (_| | |_) | | __/
/_/\_\___|_| |_| |____(_) |_| \__,_|_| |_|___/\__\__,_|_.__/|_|\___|
(XEN) Xen version 3.4-unstable (deshantm@) (gcc version 4.2.4 (Ubuntu 4.2.4-3ubuntu4)) Wed Nov 26 16:27:34 EST 2008
(XEN) Latest ChangeSet: Wed Nov 19 19:13:22 2008 +0000 18796:98d48f7680db
(XEN) Command line: loglvl=all guest_loglvl=all com1=115200,8n1 console=com1 nousb
(XEN) Video information:
(XEN) VGA is text mode 80x25, font 8x16
(XEN) VBE/DDC methods: V2; EDID transfer time: 1 seconds
(XEN) Disc information:
(XEN) Found 2 MBR signatures
(XEN) Found 2 EDD information structures
(XEN) Xen-e820 RAM map:
(XEN) 0000000000000000 - 000000000009fc00 (usable)
(XEN) 00000000000f0000 - 0000000000100000 (reserved)
(XEN) 0000000000100000 - 00000000cfdffc00 (usable)
(XEN) 00000000cfdffc00 - 00000000cfe01c00 (ACPI NVS)
(XEN) 00000000cfe03c00 - 00000000cfe53c00 (reserved)
(XEN) 00000000cfe53c00 - 00000000cfe55c00 (ACPI data)
(XEN) 00000000cfe55c00 - 00000000d0000000 (reserved)
(XEN) 00000000e0000000 - 00000000f0000000 (reserved)
(XEN) 00000000fec00000 - 00000000fed00400 (reserved)
(XEN) 00000000fed20000 - 00000000feda0000 (reserved)
(XEN) 00000000fee00000 - 00000000fef00000 (reserved)
(XEN) 00000000ffb00000 - 0000000100000000 (reserved)
(XEN) 0000000100000000 - 000000012c000000 (usable)
(XEN) System RAM: 4029MB (4126328kB)
(XEN) ACPI: RSDP 000FEBF0, 0024 (r2 DELL )
(XEN) ACPI: XSDT 000FCE97, 0084 (r1 DELL B8K 15 ASL 61)
(XEN) ACPI: FACP 000FCFBF, 00F4 (r3 DELL B8K 15 ASL 61)
(XEN) ACPI: DSDT FFF68960, 475F (r1 DELL dt_ex 1000 INTL 20050624)
(XEN) ACPI: FACS CFDFFC00, 0040
(XEN) ACPI: SSDT FFF6D397, 009A (r1 DELL st_ex 1000 INTL 20050624)
(XEN) ACPI: APIC 000FD0B3, 0092 (r1 DELL B8K 15 ASL 61)
(XEN) ACPI: BOOT 000FD145, 0028 (r1 DELL B8K 15 ASL 61)
(XEN) ACPI: ASF! 000FD16D, 0092 (r32 DELL B8K 15 ASL 61)
(XEN) ACPI: MCFG 000FD1FF, 003E (r1 DELL B8K 15 ASL 61)
(XEN) ACPI: HPET 000FD23D, 0038 (r1 DELL B8K 15 ASL 61)
(XEN) ACPI: TCPA 000FD499, 0032 (r1 DELL B8K 15 ASL 61)
(XEN) ACPI: SLIC 000FD275, 0176 (r1 DELL B8K 15 ASL 61)
(XEN) ACPI: SSDT CFDFFC40, 01F9 (r1 DpgPmm Cpu0Ist 11 INTL 20050624)
(XEN) ACPI: SSDT CFE00049, 01F9 (r1 DpgPmm Cpu1Ist 11 INTL 20050624)
(XEN) ACPI: SSDT CFE00452, 0140 (r1 DpgPmm CpuPm 10 INTL 20050624)
(XEN) NUMA turned off
(XEN) Faking a node at 0000000000000000-000000012c000000
(XEN) Xen heap: 14MB (14612kB)
(XEN) Domain heap initialised
(XEN) found SMP MP-table at 000fe710
(XEN) DMI 2.3 present.
(XEN) Using APIC driver default
(XEN) ACPI: PM-Timer IO Port: 0x808
(XEN) ACPI: ACPI SLEEP INFO: pm1x_cnt[804,0], pm1x_evt[800,0]
(XEN) ACPI: wakeup_vec[cfdffc0c], vec_size[20]
(XEN) ACPI: Local APIC address 0xfee00000
(XEN) ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
(XEN) Processor #0 6:15 APIC version 20
(XEN) ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled)
(XEN) Processor #1 6:15 APIC version 20
(XEN) ACPI: LAPIC (acpi_id[0x03] lapic_id[0x05] disabled)
(XEN) ACPI: LAPIC (acpi_id[0x04] lapic_id[0x07] disabled)
(XEN) ACPI: LAPIC (acpi_id[0x05] lapic_id[0x00] disabled)
(XEN) ACPI: LAPIC (acpi_id[0x06] lapic_id[0x01] disabled)
(XEN) ACPI: LAPIC (acpi_id[0x07] lapic_id[0x02] disabled)
(XEN) ACPI: LAPIC (acpi_id[0x08] lapic_id[0x03] disabled)
(XEN) ACPI: LAPIC_NMI (acpi_id[0xff] high level lint[0x1])
(XEN) ACPI: IOAPIC (id[0x08] address[0xfec00000] gsi_base[0])
(XEN) IOAPIC[0]: apic_id 8, version 32, address 0xfec00000, GSI 0-23
(XEN) ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
(XEN) ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
(XEN) ACPI: IRQ0 used by override.
(XEN) ACPI: IRQ2 used by override.
(XEN) ACPI: IRQ9 used by override.
(XEN) Enabling APIC mode: Flat. Using 1 I/O APICs
(XEN) ACPI: HPET id: 0x8086a201 base: 0xfed00000
(XEN) Using ACPI (MADT) for SMP configuration information
(XEN) Using scheduler: SMP Credit Scheduler (credit)
(XEN) Initializing CPU#0
(XEN) Detected 2394.074 MHz processor.
(XEN) CPU: L1 I cache: 32K, L1 D cache: 32K
(XEN) CPU: L2 cache: 4096K
(XEN) CPU: Physical Processor ID: 0
(XEN) CPU: Processor Core ID: 0
(XEN) HVM: VMX enabled
(XEN) CPU0: Intel(R) Core(TM)2 CPU 6600 @ 2.40GHz stepping 06
(XEN) Booting processor 1/1 eip 8c000
(XEN) Initializing CPU#1
(XEN) CPU: L1 I cache: 32K, L1 D cache: 32K
(XEN) CPU: L2 cache: 4096K
(XEN) CPU: Physical Processor ID: 0
(XEN) CPU: Processor Core ID: 1
(XEN) CPU1: Intel(R) Core(TM)2 CPU 6600 @ 2.40GHz stepping 06
(XEN) Total of 2 processors activated.
(XEN) ENABLING IO-APIC IRQs
(XEN) -> Using new ACK method
(XEN) ..TIMER: vector=0xF0 apic1=0 pin1=2 apic2=-1 pin2=-1
(XEN) checking TSC synchronization across 2 CPUs: passed.
(XEN) Platform timer is 14.318MHz HPET
(XEN) Brought up 2 CPUs
(XEN) I/O virtualisation disabled
(XEN) ACPI sleep modes: S3
(XEN) MCA: Machine check polling timer started.
(XEN) *** LOADING DOMAIN 0 ***
(XEN) Xen kernel: 64-bit, lsb, compat32
(XEN) Dom0 kernel: 64-bit, PAE, lsb, paddr 0x1000000 -> 0x19d72ec
(XEN) PHYSICAL MEMORY ARRANGEMENT:
(XEN) Dom0 alloc.: 0000000124000000->0000000128000000 (962060 pages to be allocated)
(XEN) VIRTUAL MEMORY ARRANGEMENT:
(XEN) Loaded kernel: ffffffff81000000->ffffffff819d72ec
(XEN) Init. ramdisk: ffffffff819d8000->ffffffff82408600
(XEN) Phys-Mach map: ffffffff82409000->ffffffff82b80060
(XEN) Start info: ffffffff82b81000->ffffffff82b814a4
(XEN) Page tables: ffffffff82b82000->ffffffff82b9d000
(XEN) Boot stack: ffffffff82b9d000->ffffffff82b9e000
(XEN) TOTAL: ffffffff80000000->ffffffff83000000
(XEN) ENTRY ADDRESS: ffffffff81826200
(XEN) Dom0 has maximum 2 VCPUs
(XEN) Scrubbing Free RAM: .done.
(XEN) Xen trace buffers: disabled
(XEN) Std. Loglevel: All
(XEN) Guest Loglevel: All
(XEN) *** Serial input -> DOM0 (type 'CTRL-a' three times to switch input to Xen)
(XEN) Freed 108kB init memory.
mapping kernel into physical memory
Xen: setup ISA identity maps
about to get started...
[ 0.000000] PAT disabled on Xen
[ 0.000000] Initializing cgroup subsys cpuset
[ 0.000000] Initializing cgroup subsys cpu
[ 0.000000] Linux version 2.6.28-rc6-tip (deshantm@xen-kvm) (gcc version 4.2.4 (Ubuntu 4.2.4-3ubuntu4)) #1 SMP Sat Nov 29 19:14:57 EST 2008
[ 0.000000] Command line: root=/dev/sda1 ro console=hvc0 earlyprintk=xen xencons=ttyS0,115200
[ 0.000000] KERNEL supported cpus:
[ 0.000000] Intel GenuineIntel
[ 0.000000] AMD AuthenticAMD
[ 0.000000] Centaur CentaurHauls
[ 0.000000] BIOS-provided physical RAM map:
[ 0.000000] Xen: 0000000000000000 - 00000000000a0000 (usable)
[ 0.000000] Xen: 00000000000a0000 - 0000000000100000 (reserved)
[ 0.000000] Xen: 0000000000100000 - 0000000002409000 (usable)
[ 0.000000] Xen: 0000000002409000 - 0000000002b82000 (reserved)
[ 0.000000] Xen: 0000000002b82000 - 00000000eee0c000 (usable)
[ 0.000000] console [xenboot0] enabled
[ 0.000000] DMI 2.3 present.
[ 0.000000] last_pfn = 0xeee0c max_arch_pfn = 0x3ffffffff
[ 0.000000] init_memory_mapping: 0000000000000000-00000000eee0c000
[ 0.000000] last_map_addr: eee0c000 end: eee0c000
[ 0.000000] RAMDISK: 019d8000 - 02408600
[ 0.000000] ACPI: RSDP 000FEBF0, 0024 (r2 DELL )
[ 0.000000] ACPI: XSDT 000FCE97, 0084 (r1 DELL B8K 15 ASL 61)
[ 0.000000] ACPI: FACP 000FCFBF, 00F4 (r3 DELL B8K 15 ASL 61)
[ 0.000000] ACPI: DSDT FFF68960, 475F (r1 DELL dt_ex 1000 INTL 20050624)
[ 0.000000] ACPI: FACS CFDFFC00, 0040
[ 0.000000] ACPI: SSDT FFF6D397, 009A (r1 DELL st_ex 1000 INTL 20050624)
[ 0.000000] ACPI: APIC 000FD0B3, 0092 (r1 DELL B8K 15 ASL 61)
[ 0.000000] ACPI: BOOT 000FD145, 0028 (r1 DELL B8K 15 ASL 61)
[ 0.000000] ACPI: ASF! 000FD16D, 0092 (r32 DELL B8K 15 ASL 61)
[ 0.000000] ACPI: MCFG 000FD1FF, 003E (r1 DELL B8K 15 ASL 61)
[ 0.000000] ACPI: HPET 000FD23D, 0038 (r1 DELL B8K 15 ASL 61)
[ 0.000000] ACPI: TCPA 000FD499, 0032 (r1 DELL B8K 15 ASL 61)
[ 0.000000] ACPI: SLIC 000FD275, 0176 (r1 DELL B8K 15 ASL 61)
[ 0.000000] ACPI: SSDT CFDFFC40, 01F9 (r1 DpgPmm Cpu0Ist 11 INTL 20050624)
[ 0.000000] ACPI: SSDT CFE00049, 01F9 (r1 DpgPmm Cpu1Ist 11 INTL 20050624)
[ 0.000000] ACPI: SSDT CFE00452, 0140 (r1 DpgPmm CpuPm 10 INTL 20050624)
[ 0.000000] No NUMA configuration found
[ 0.000000] Faking a node at 0000000000000000-00000000eee0c000
[ 0.000000] Bootmem setup node 0 0000000000000000-00000000eee0c000
[ 0.000000] NODE_DATA [0000000000001000 - 0000000000005fff]
[ 0.000000] bootmap [0000000000008000 - 0000000000025dc7] pages 1e
[ 0.000000] (6 early reservations) ==> bootmem [0000000000 - 00eee0c000]
[ 0.000000] #0 [0000000000 - 0000001000] BIOS data page ==> [0000000000 - 0000001000]
[ 0.000000] #1 [0000006000 - 0000008000] TRAMPOLINE ==> [0000006000 - 0000008000]
[ 0.000000] #2 [0002b82000 - 0002b9d000] XEN PAGETABLES ==> [0002b82000 - 0002b9d000]
[ 0.000000] #3 [0001000000 - 00019d72ec] TEXT DATA BSS ==> [0001000000 - 00019d72ec]
[ 0.000000] #4 [00019d8000 - 0002408600] RAMDISK ==> [00019d8000 - 0002408600]
[ 0.000000] #5 [0000100000 - 000085f000] PGTABLE ==> [0000100000 - 000085f000]
[ 0.000000] found SMP MP-table at [ffff8800000fe710] 000fe710
[ 0.000000] Zone PFN ranges:
[ 0.000000] DMA 0x00000000 -> 0x00001000
[ 0.000000] DMA32 0x00001000 -> 0x00100000
[ 0.000000] Normal 0x00100000 -> 0x00100000
[ 0.000000] Movable zone start PFN for each node
[ 0.000000] early_node_map[3] active PFN ranges
[ 0.000000] 0: 0x00000000 -> 0x000000a0
[ 0.000000] 0: 0x00000100 -> 0x00002409
[ 0.000000] 0: 0x00002b82 -> 0x000eee0c
[ 0.000000] ACPI: PM-Timer IO Port: 0x808
[ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x05] disabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x04] lapic_id[0x07] disabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x05] lapic_id[0x00] disabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x06] lapic_id[0x01] disabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x07] lapic_id[0x02] disabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x08] lapic_id[0x03] disabled)
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0xff] high level lint[0x1])
[ 0.000000] ACPI: IOAPIC (id[0x08] address[0xfec00000] gsi_base[0])
[ 0.000000] IOAPIC[0]: apic_id 8, version 0, address 0xfec00000, GSI 0-23
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[ 0.000000] ACPI: HPET id: 0x8086a201 base: 0xfed00000
[ 0.000000] Using ACPI (MADT) for SMP configuration information
[ 0.000000] SMP: Allowing 2 CPUs, 0 hotplug CPUs
(XEN) io_apic.c:2203:
(XEN) ioapic_guest_write: apic=0, pin=2, old_irq=0, new_irq=-1
(XEN) ioapic_guest_write: old_entry=000009f0, new_entry=00010900
(XEN) ioapic_guest_write: Attempt to remove IO-APIC pin of in-use IRQ!
(XEN) io_apic.c:2203:
(XEN) ioapic_guest_write: apic=0, pin=4, old_irq=4, new_irq=-1
(XEN) ioapic_guest_write: old_entry=000009f1, new_entry=00010900
(XEN) ioapic_guest_write: Attempt to remove IO-APIC pin of in-use IRQ!
[ 0.000000] PM: Registered nosave memory: 00000000000a0000 - 0000000000100000
[ 0.000000] PM: Registered nosave memory: 0000000002409000 - 0000000002b82000
[ 0.000000] Allocating PCI resources starting at f0000000 (gap: eee0c000:111f4000)
[ 0.000000] PERCPU: Allocating 65536 bytes of per cpu data
[ 0.000000] Built 1 zonelists in Node order, mobility grouping on. Total pages: 961165
[ 0.000000] Policy zone: DMA32
[ 0.000000] Kernel command line: root=/dev/sda1 ro console=hvc0 earlyprintk=xen xencons=ttyS0,115200
[ 0.000000] Initializing CPU#0
[ 0.000000] xen: allocated irq 9 for acpi 9
[ 0.000000] PID hash table entries: 4096 (order: 12, 32768 bytes)
[ 0.000000] Detected 2394.074 MHz processor.
[ 0.000999] Console: colour dummy device 80x25
[ 0.000999] console handover: boot [xenboot0] -> real [hvc0]
[ 0.000999] Checking aperture...
[ 0.000999] No AGP bridge found
[ 0.000999] PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
[ 0.000999] Placing software IO TLB between 0x1c0000 - 0x11df3c000
[ 0.000999] Memory: 3757400k/3913776k available (4742k kernel code, 8036k absent, 148340k reserved, 3080k data, 604k init)
[ 0.000999] SLUB: Genslabs=13, HWalign=64, Order=0-3, MinObjects=0, CPUs=2, Nodes=1
[ 0.000999] installing Xen timer for CPU 0
[ 0.000999] Calibrating delay loop (skipped), value calculated using timer frequency.. 4788.14 BogoMIPS (lpj=2394074)
[ 0.000999] Security Framework initialized
[ 0.000999] SELinux: Initializing.
[ 0.000999] Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes)
[ 0.003124] Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes)
[ 0.004085] Mount-cache hash table entries: 256
[ 0.004281] Initializing cgroup subsys ns
[ 0.004288] Initializing cgroup subsys cpuacct
[ 0.004325] CPU: L1 I cache: 32K, L1 D cache: 32K
[ 0.004329] CPU: L2 cache: 4096K
[ 0.004334] CPU 0/0x0 -> Node 0
[ 0.004338] CPU: Physical Processor ID: 0
[ 0.004340] CPU: Processor Core ID: 0
[ 0.004353] SMP alternatives: switching to UP code
[ 0.032032] ACPI: Core revision 20080926
[ 0.236025] cpu 0 spinlock event irq 17
[ 0.236153] installing Xen timer for CPU 1
[ 0.236163] cpu 1 spinlock event irq 23
[ 0.236188] SMP alternatives: switching to SMP code
[ 0.000009] Initializing CPU#1
[ 0.000052] CPU: L1 I cache: 32K, L1 D cache: 32K
[ 0.000054] CPU: L2 cache: 4096K
[ 0.000057] CPU 1/0x0 -> Node 0
[ 0.000058] CPU: Physical Processor ID: 0
[ 0.000059] CPU: Processor Core ID: 0
[ 0.272311] Brought up 2 CPUs
[ 0.272476] khelper used greatest stack depth: 6344 bytes left
[ 0.272659] net_namespace: 1344 bytes
[ 0.272666] Booting paravirtualized kernel on Xen
[ 0.272669] Xen version: 3.4-unstable (preserve-AD) (dom0)
[ 0.272873] Grant table initialized
[ 0.272903] Time: 2:29:08 Date: 12/02/08
[ 0.272935] NET: Registered protocol family 16
[ 0.273342] khelper used greatest stack depth: 5944 bytes left
[ 0.273342] ACPI FADT declares the system doesn't support PCIe ASPM, so disable it
[ 0.273342] ACPI: bus type pci registered
[ 0.273342] PCI: MCFG configuration 0: base e0000000 segment 0 buses 0 - 255
[ 0.273342] PCI: Not using MMCONFIG.
[ 0.273342] PCI: Using configuration type 1 for base access
[ 0.333441] ACPI: BIOS _OSI(Linux) query ignored
[ 0.333447] ACPI: DMI System Vendor: Dell Inc.
[ 0.333451] ACPI: DMI Product Name: OptiPlex 745
[ 0.333455] ACPI: DMI Product Version:
[ 0.333458] ACPI: DMI Board Name: 0HR330
[ 0.333461] ACPI: DMI BIOS Vendor: Dell Inc.
[ 0.333464] ACPI: DMI BIOS Date: 12/06/2007
[ 0.333467] ACPI: Please send DMI info above to linux-acpi@vger.kernel.org
[ 0.333471] ACPI: If "acpi_osi=Linux" works better, please notify linux-acpi@vger.kernel.org
[ 0.352868] ACPI: Interpreter enabled
[ 0.352873] ACPI: (supports S0 S3 S4 S5)
[ 0.352893] ACPI: Using IOAPIC for interrupt routing
[ 0.352961] PCI: MCFG configuration 0: base e0000000 segment 0 buses 0 - 255
[ 0.416440] PCI: MCFG area at e0000000 reserved in ACPI motherboard resources
[ 0.416447] resource map sanity check conflict: 0xe0000000 0xefffffff 0x2b82000 0xeee0bfff System RAM
[ 0.416456] ------------[ cut here ]------------
[ 0.416460] WARNING: at arch/x86/mm/ioremap.c:226 __ioremap_caller+0xc7/0x28d()
[ 0.416465] Modules linked in:
[ 0.416469] Pid: 1, comm: swapper Not tainted 2.6.28-rc6-tip #1
[ 0.416474] Call Trace:
[ 0.416480] [<ffffffff81042d44>] warn_on_slowpath+0x58/0x75
[ 0.416486] [<ffffffff811e98b8>] ? acpi_ut_acquire_mutex+0x3e/0x92
[ 0.416492] [<ffffffff81043a34>] ? printk+0x67/0x69
[ 0.416497] [<ffffffff81048bae>] ? iomem_map_sanity_check+0x87/0xb9
[ 0.416502] [<ffffffff811e97a9>] ? acpi_ut_release_mutex+0x5d/0x61
[ 0.416507] [<ffffffff8102fb07>] __ioremap_caller+0xc7/0x28d
[ 0.416514] [<ffffffff818552f6>] ? pci_mmcfg_arch_init+0x90/0x11d
[ 0.416520] [<ffffffff810b49ce>] ? __kmalloc+0xaa/0xd1
[ 0.416525] [<ffffffff8102fda2>] ioremap_nocache+0x12/0x14
[ 0.416529] [<ffffffff818552f6>] pci_mmcfg_arch_init+0x90/0x11d
[ 0.416535] [<ffffffff81855de0>] __pci_mmcfg_init+0x267/0x298
[ 0.416541] [<ffffffff8184b93c>] ? acpi_init+0x0/0x239
[ 0.416545] [<ffffffff8184b93c>] ? acpi_init+0x0/0x239
[ 0.416550] [<ffffffff81855e1c>] pci_mmcfg_late_init+0xb/0xd
[ 0.416555] [<ffffffff8184bad8>] acpi_init+0x19c/0x239
[ 0.416560] [<ffffffff8184a212>] ? fbmem_init+0x0/0x91
[ 0.416565] [<ffffffff8100a056>] do_one_initcall+0x56/0x138
[ 0.416570] [<ffffffff81082989>] ? register_irq_proc+0xa1/0xbd
[ 0.416576] [<ffffffff810f0000>] ? load_elf_binary+0x1341/0x1805
[ 0.416583] [<ffffffff8182698e>] kernel_init+0x12c/0x180
[ 0.416588] [<ffffffff81012619>] child_rip+0xa/0x21
[ 0.416593] [<ffffffff81011f2d>] ? retint_restore_args+0x5/0x20
[ 0.416598] [<ffffffff8101260f>] ? child_rip+0x0/0x21
[ 0.416606] ---[ end trace 4eaa2a86a8e2da22 ]---
[ 0.416611] PCI: Cannot map mmconfig aperture for segment 0
[ 0.505951] ACPI: ACPI Dock Station Driver: 1 docks/bays found
[ 0.505951] ACPI: PCI Root Bridge [PCI0] (0000:00)
[ 0.506108] pci 0000:00:01.0: PME# supported from D0 D3hot D3cold
[ 0.506116] pci 0000:00:01.0: PME# disabled
[ 0.506457] pci 0000:00:1a.7: PME# supported from D0 D3hot D3cold
[ 0.506465] pci 0000:00:1a.7: PME# disabled
[ 0.506581] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
[ 0.506589] pci 0000:00:1b.0: PME# disabled
[ 0.506696] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
[ 0.506704] pci 0000:00:1c.0: PME# disabled
[ 0.506792] pci 0000:00:1c.4: PME# supported from D0 D3hot D3cold
[ 0.506800] pci 0000:00:1c.4: PME# disabled
[ 0.507204] pci 0000:00:1d.7: PME# supported from D0 D3hot D3cold
[ 0.507213] pci 0000:00:1d.7: PME# disabled
[ 0.507397] pci 0000:00:1f.0: quirk: region 0800-087f claimed by ICH6 ACPI/GPIO/TCO
[ 0.507404] pci 0000:00:1f.0: quirk: region 0880-08bf claimed by ICH6 GPIO
[ 0.507532] pci 0000:00:1f.2: PME# supported from D3hot
[ 0.507539] pci 0000:00:1f.2: PME# disabled
[ 0.507735] pci 0000:00:1f.5: PME# supported from D3hot
[ 0.507742] pci 0000:00:1f.5: PME# disabled
[ 0.508258] pci 0000:03:00.0: PME# supported from D3hot D3cold
[ 0.508267] pci 0000:03:00.0: PME# disabled
[ 0.508477] pci 0000:04:02.0: PME# supported from D1 D2 D3hot D3cold
[ 0.508485] pci 0000:04:02.0: PME# disabled
[ 0.508555] pci 0000:00:1e.0: transparent bridge
[ 1.400608] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 9 10 *11 12 15)
[ 1.401780] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 9 *10 11 12 15)
[ 1.402546] ACPI: PCI Interrupt Link [LNKC] (IRQs *3 4 5 6 7 9 10 11 12 15)
[ 1.403283] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 9 10 11 12 15) *0, disabled.
[ 1.404064] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 *9 10 11 12 15)
[ 1.404873] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 9 10 11 12 15) *0, disabled.
[ 1.405613] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 7 *9 10 11 12 15)
[ 1.406355] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 *5 6 7 9 10 11 12 15)
[ 1.406573] ACPI Warning (tbutils-0217): Incorrect checksum in table [TCPA] - 00, should be 88 [20080926]
[ 1.406573] xen_balloon: Initialising balloon driver.
[ 1.407017] SCSI subsystem initialized
[ 1.407047] usbcore: registered new interface driver usbfs
[ 1.407047] usbcore: registered new interface driver hub
[ 1.407047] usbcore: registered new device driver usb
[ 1.407999] PCI: Using ACPI for IRQ routing
[ 1.407999] pci 0000:00:01.0: BAR 9: can't allocate resource
[ 1.408016] pci 0000:01:00.0: BAR 0: can't allocate resource
[ 1.415002] cfg80211: Using static regulatory domain info
[ 1.415002] cfg80211: Regulatory domain: US
[ 1.415002] (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
[ 1.415002] (2402000 KHz - 2472000 KHz @ 40000 KHz), (600 mBi, 2700 mBm)
[ 1.415002] (5170000 KHz - 5190000 KHz @ 40000 KHz), (600 mBi, 2300 mBm)
[ 1.415002] (5190000 KHz - 5210000 KHz @ 40000 KHz), (600 mBi, 2300 mBm)
[ 1.415002] (5210000 KHz - 5230000 KHz @ 40000 KHz), (600 mBi, 2300 mBm)
[ 1.415004] (5230000 KHz - 5330000 KHz @ 40000 KHz), (600 mBi, 2300 mBm)
[ 1.415010] (5735000 KHz - 5835000 KHz @ 40000 KHz), (600 mBi, 3000 mBm)
[ 1.415017] cfg80211: Calling CRDA for country: US
[ 1.415039] NetLabel: Initializing
[ 1.415039] NetLabel: domain hash size = 128
[ 1.415039] NetLabel: protocols = UNLABELED CIPSOv4
[ 1.415039] NetLabel: unlabeled traffic allowed by default
[ 1.415039] Xen: Initializing Xen DMA ops
[ 1.415039] Xen: Enabling DMA fallback to swiotlb
[ 1.415056] PCI-GART: No AMD GART found.
[ 1.418155] pnp: PnP ACPI init
[ 1.418172] ACPI: bus type pnp registered
[ 1.431330] pnp 00:01: io resource (0x800-0x85f) overlaps 0000:00:1f.0 BAR 7 (0x800-0x87f), disabling
[ 1.431336] pnp 00:01: io resource (0x860-0x8ff) overlaps 0000:00:1f.0 BAR 7 (0x800-0x87f), disabling
[ 1.431622] system 00:01: ioport range 0xc00-0xc7f has been reserved
[ 1.432262] xen_set_ioapic_routing: irq 13 gsi 13 vector 112 ioapic 0 pin 13 triggering 1 polarity 0
[ 1.432857] xen_set_ioapic_routing: irq 8 gsi 8 vector 72 ioapic 0 pin 8 triggering 1 polarity 0
[ 1.450117] xen_set_ioapic_routing: irq 4 gsi 4 vector 241 ioapic 0 pin 4 triggering 1 polarity 0
(XEN) io_apic.c:2216:
(XEN) ioapic_guest_write: apic=0, pin=4, old_irq=4, new_irq=4
(XEN) ioapic_guest_write: old_entry=000009f1, new_entry=000189f1
(XEN) ioapic_guest_write: Attempt to modify IO-APIC pin for in-use IRQ!
[ 1.474075] pnp 00:07: mem resource (0x0-0x9ffff) overlaps 0000:01:00.0 BAR 0 (0x0-0xfffffff), disabling
[ 1.474082] pnp 00:07: mem resource (0x100000-0xffffff) overlaps 0000:01:00.0 BAR 0 (0x0-0xfffffff), disabling
[ 1.474088] pnp 00:07: mem resource (0x1000000-0xcfdffbff) overlaps 0000:01:00.0 BAR 0 (0x0-0xfffffff), disabling
[ 1.474095] pnp 00:07: mem resource (0xf0000-0xfffff) overlaps 0000:01:00.0 BAR 0 (0x0-0xfffffff), disabling
[ 1.474101] pnp 00:07: mem resource (0xc0000-0xcffff) overlaps 0000:01:00.0 BAR 0 (0x0-0xfffffff), disabling
[ 1.474356] system 00:07: iomem range 0xfec00000-0xfecfffff has been reserved
[ 1.474362] system 00:07: iomem range 0xfee00000-0xfeefffff has been reserved
[ 1.474366] system 00:07: iomem range 0xffb00000-0xffbfffff has been reserved
[ 1.474371] system 00:07: iomem range 0xffc00000-0xffffffff has been reserved
[ 1.478662] system 00:08: ioport range 0x100-0x1fe has been reserved
[ 1.478668] system 00:08: ioport range 0x200-0x277 has been reserved
[ 1.478672] system 00:08: ioport range 0x280-0x2e7 has been reserved
[ 1.478677] system 00:08: ioport range 0x2f0-0x2f7 has been reserved
[ 1.478681] system 00:08: ioport range 0x300-0x377 has been reserved
[ 1.478686] system 00:08: ioport range 0x380-0x3bb has been reserved
[ 1.478690] system 00:08: ioport range 0x3c0-0x3e7 has been reserved
[ 1.478695] system 00:08: ioport range 0x3f6-0x3f7 has been reserved
[ 1.478699] system 00:08: ioport range 0x400-0x4cf has been reserved
[ 1.478704] system 00:08: ioport range 0x4d2-0x57f has been reserved
[ 1.478709] system 00:08: ioport range 0x580-0x677 has been reserved
[ 1.478713] system 00:08: ioport range 0x680-0x777 has been reserved
[ 1.478718] system 00:08: ioport range 0x780-0x7bb has been reserved
[ 1.478722] system 00:08: ioport range 0x7c0-0x7ff has been reserved
[ 1.478727] system 00:08: ioport range 0x8e0-0x8ff has been reserved
[ 1.478732] system 00:08: ioport range 0x900-0x9fe has been reserved
[ 1.478736] system 00:08: ioport range 0xa00-0xafe has been reserved
[ 1.478741] system 00:08: ioport range 0xb00-0xbfe has been reserved
[ 1.478745] system 00:08: ioport range 0xc80-0xcaf has been reserved
[ 1.478750] system 00:08: ioport range 0xcc0-0xcf7 has been reserved
[ 1.478755] system 00:08: ioport range 0xd00-0xdfe has been reserved
[ 1.478759] system 00:08: ioport range 0xe00-0xefe has been reserved
[ 1.478764] system 00:08: ioport range 0xf00-0xffe has been reserved
[ 1.478768] system 00:08: ioport range 0x2000-0x20fe has been reserved
[ 1.478773] system 00:08: ioport range 0x2100-0x21fe has been reserved
[ 1.478778] system 00:08: ioport range 0x2200-0x22fe has been reserved
[ 1.478783] system 00:08: ioport range 0x2300-0x23fe has been reserved
[ 1.478787] system 00:08: ioport range 0x2400-0x24fe has been reserved
[ 1.478792] system 00:08: ioport range 0x2500-0x25fe has been reserved
[ 1.478797] system 00:08: ioport range 0x2600-0x26fe has been reserved
[ 1.478801] system 00:08: ioport range 0x2700-0x27fe has been reserved
[ 1.478806] system 00:08: ioport range 0x2800-0x28fe has been reserved
[ 1.478811] system 00:08: ioport range 0x2900-0x29fe has been reserved
[ 1.478816] system 00:08: ioport range 0x2a00-0x2afe has been reserved
[ 1.478820] system 00:08: ioport range 0x2b00-0x2bfe has been reserved
[ 1.478825] system 00:08: ioport range 0x2c00-0x2cfe has been reserved
[ 1.478830] system 00:08: ioport range 0x2d00-0x2dfe has been reserved
[ 1.478836] system 00:08: ioport range 0x2e00-0x2efe has been reserved
[ 1.478841] system 00:08: ioport range 0x2f00-0x2ffe has been reserved
[ 1.478846] system 00:08: ioport range 0x5000-0x50fe has been reserved
[ 1.478851] system 00:08: ioport range 0x5100-0x51fe has been reserved
[ 1.478855] system 00:08: ioport range 0x5200-0x52fe has been reserved
[ 1.478860] system 00:08: ioport range 0x5300-0x53fe has been reserved
[ 1.478865] system 00:08: ioport range 0x5400-0x54fe has been reserved
[ 1.478870] system 00:08: ioport range 0x5500-0x55fe has been reserved
[ 1.478874] system 00:08: ioport range 0x5600-0x56fe has been reserved
[ 1.478879] system 00:08: ioport range 0x5700-0x57fe has been reserved
[ 1.478884] system 00:08: ioport range 0x5800-0x58fe has been reserved
[ 1.478889] system 00:08: ioport range 0x5900-0x59fe has been reserved
[ 1.478894] system 00:08: ioport range 0x5a00-0x5afe has been reserved
[ 1.478898] system 00:08: ioport range 0x5b00-0x5bfe has been reserved
[ 1.478903] system 00:08: ioport range 0x5c00-0x5cfe has been reserved
[ 1.478908] system 00:08: ioport range 0x5d00-0x5dfe has been reserved
[ 1.478913] system 00:08: ioport range 0x5e00-0x5efe has been reserved
[ 1.478918] system 00:08: ioport range 0x5f00-0x5ffe has been reserved
[ 1.478923] system 00:08: ioport range 0x6000-0x60fe has been reserved
[ 1.478927] system 00:08: ioport range 0x6100-0x61fe has been reserved
[ 1.478932] system 00:08: ioport range 0x6200-0x62fe has been reserved
[ 1.478937] system 00:08: ioport range 0x6300-0x63fe has been reserved
[ 1.478942] system 00:08: ioport range 0x6400-0x64fe has been reserved
[ 1.478947] system 00:08: ioport range 0x6500-0x65fe has been reserved
[ 1.478952] system 00:08: ioport range 0x6600-0x66fe has been reserved
[ 1.478956] system 00:08: ioport range 0x6700-0x67fe has been reserved
[ 1.478961] system 00:08: ioport range 0x6800-0x68fe has been reserved
[ 1.478966] system 00:08: ioport range 0x6900-0x69fe has been reserved
[ 1.478971] system 00:08: ioport range 0x6a00-0x6afe has been reserved
[ 1.479731] system 00:08: ioport range 0x6b00-0x6bfe has been reserved
[ 1.486655] system 00:08: ioport range 0x6c00-0x6cfe has been reserved
[ 1.492192] system 00:08: ioport range 0x6d00-0x6dfe has been reserved
[ 1.499114] system 00:08: ioport range 0x6e00-0x6efe has been reserved
[ 1.506042] system 00:08: ioport range 0x6f00-0x6ffe has been reserved
[ 1.512962] system 00:08: ioport range 0xa000-0xa0fe has been reserved
[ 1.518502] system 00:08: ioport range 0xa100-0xa1fe has been reserved
[ 1.525424] system 00:08: ioport range 0xa200-0xa2fe has been reserved
[ 1.532349] system 00:08: ioport range 0xa300-0xa3fe has been reserved
[ 1.539272] system 00:08: ioport range 0xa400-0xa4fe has been reserved
[ 1.544809] system 00:08: ioport range 0xa500-0xa5fe has been reserved
[ 1.551734] system 00:08: ioport range 0xa600-0xa6fe has been reserved
[ 1.558656] system 00:08: ioport range 0xa700-0xa7fe has been reserved
[ 1.565581] system 00:08: ioport range 0xa800-0xa8fe has been reserved
[ 1.571119] system 00:08: ioport range 0xa900-0xa9fe has been reserved
[ 1.578043] system 00:08: ioport range 0xaa00-0xaafe has been reserved
[ 1.584966] system 00:08: ioport range 0xab00-0xabfe has been reserved
[ 1.591891] system 00:08: ioport range 0xac00-0xacfe has been reserved
[ 1.597429] system 00:08: ioport range 0xad00-0xadfe has been reserved
[ 1.604351] system 00:08: ioport range 0xae00-0xaefe has been reserved
[ 1.611276] system 00:08: ioport range 0xaf00-0xaffe has been reserved
[ 1.618199] system 00:08: iomem range 0xe0000000-0xefffffff could not be reserved
[ 1.625123] system 00:08: iomem range 0xfeda0000-0xfedacfff has been reserved
[ 1.633725] pnp: PnP ACPI: found 10 devices
[ 1.636201] ACPI: ACPI bus type pnp unregistered
[ 1.647232] pci 0000:00:01.0: PCI bridge, secondary bus 0000:01
[ 1.648665] pci 0000:00:01.0: IO window: 0xd000-0xdfff
[ 1.652820] pci 0000:00:01.0: MEM window: 0xfe900000-0xfeafffff
[ 1.659743] pci 0000:00:01.0: PREFETCH window: 0x00000100000000-0x0000010fffffff
[ 1.666668] pci 0000:00:1c.0: PCI bridge, secondary bus 0000:02
[ 1.673589] pci 0000:00:1c.0: IO window: disabled
[ 1.677745] pci 0000:00:1c.0: MEM window: 0xfe800000-0xfe8fffff
[ 1.684668] pci 0000:00:1c.0: PREFETCH window: disabled
[ 1.688825] pci 0000:00:1c.4: PCI bridge, secondary bus 0000:03
[ 1.695742] pci 0000:00:1c.4: IO window: disabled
[ 1.699900] pci 0000:00:1c.4: MEM window: 0xfe700000-0xfe7fffff
[ 1.706823] pci 0000:00:1c.4: PREFETCH window: disabled
[ 1.710982] pci 0000:00:1e.0: PCI bridge, secondary bus 0000:04
[ 1.717900] pci 0000:00:1e.0: IO window: 0xc000-0xcfff
[ 1.722058] pci 0000:00:1e.0: MEM window: 0xfe500000-0xfe6fffff
[ 1.728979] pci 0000:00:1e.0: PREFETCH window: 0x000000f0000000-0x000000f00fffff
[ 1.737308] xen_set_ioapic_routing: irq 29 gsi 16 vector 144 ioapic 0 pin 16 triggering 0 polarity 1
[ 1.745595] pci 0000:00:01.0: PCI INT A -> GSI 16 (level, low) -> IRQ 29
[ 1.752515] xen: PCI device 0000:00:01.0 pin 1 -> irq 29
[ 1.758072] xen_allocate_pirq: returning irq 29 for gsi 16
[ 1.763594] xen_set_ioapic_routing: irq 29 gsi 16 vector 144 ioapic 0 pin 16 triggering 0 polarity 1
[ 1.773286] pci 0000:00:1c.0: PCI INT A -> GSI 16 (level, low) -> IRQ 29
[ 1.778825] xen: PCI device 0000:00:1c.0 pin 1 -> irq 29
[ 1.784379] xen_allocate_pirq: returning irq 29 for gsi 16
[ 1.789904] xen_set_ioapic_routing: irq 29 gsi 16 vector 144 ioapic 0 pin 16 triggering 0 polarity 1
[ 1.799596] pci 0000:00:1c.4: PCI INT A -> GSI 16 (level, low) -> IRQ 29
[ 1.806517] xen: PCI device 0000:00:1c.4 pin 1 -> irq 29
[ 1.812075] bus: 00 index 0 io port: [0x00-0xffff]
[ 1.816212] bus: 00 index 1 mmio: [0x000000-0xffffffffffffffff]
[ 1.823134] bus: 01 index 0 io port: [0xd000-0xdfff]
[ 1.827288] bus: 01 index 1 mmio: [0xfe900000-0xfeafffff]
[ 1.832826] bus: 01 index 2 mmio: [0x100000000-0x10fffffff]
[ 1.838366] bus: 01 index 3 mmio: [0x0-0x0]
[ 1.842518] bus: 02 index 0 mmio: [0x0-0x0]
[ 1.846674] bus: 02 index 1 mmio: [0xfe800000-0xfe8fffff]
[ 1.852213] bus: 02 index 2 mmio: [0x0-0x0]
[ 1.856366] bus: 02 index 3 mmio: [0x0-0x0]
[ 1.860521] bus: 03 index 0 mmio: [0x0-0x0]
[ 1.864676] bus: 03 index 1 mmio: [0xfe700000-0xfe7fffff]
[ 1.870213] bus: 03 index 2 mmio: [0x0-0x0]
[ 1.874368] bus: 03 index 3 mmio: [0x0-0x0]
[ 1.878521] bus: 04 index 0 io port: [0xc000-0xcfff]
[ 1.884061] bus: 04 index 1 mmio: [0xfe500000-0xfe6fffff]
[ 1.889601] bus: 04 index 2 mmio: [0xf0000000-0xf00fffff]
[ 1.895138] bus: 04 index 3 io port: [0x00-0xffff]
[ 1.900678] bus: 04 index 4 mmio: [0x000000-0xffffffffffffffff]
[ 1.906224] NET: Registered protocol family 2
[ 1.920367] IP route cache hash table entries: 131072 (order: 8, 1048576 bytes)
[ 1.922712] TCP established hash table entries: 524288 (order: 11, 8388608 bytes)
[ 1.929669] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
[ 1.931633] TCP: Hash tables configured (established 524288 bind 65536)
[ 1.938064] TCP reno registered
[ 1.945193] NET: Registered protocol family 1
[ 1.946491] checking if image is initramfs... it is
[ 1.963359] Freeing initrd memory: 10433k freed
[ 1.968564] Simple Boot Flag at 0x7a set to 0x1
(XEN) traps.c:2193:d0 Domain attempted WRMSR 000000000000008b from 000000c6:00000000 to 00000000:00000000.
(XEN) traps.c:2193:d0 Domain attempted WRMSR 000000000000008b from 000000c6:00000000 to 00000000:00000000.
[ 1.970096] Microcode Update Driver: v2.00 <tigran@aivazian.fsnet.co.uk>, Peter Oruba
[ 1.986876] audit: initializing netlink socket (disabled)
[ 1.992099] type=2000 audit(1228184950.824:1): initialized
[ 2.005191] HugeTLB registered 2 MB page size, pre-allocated 0 pages
[ 2.008652] VFS: Disk quotas dquot_6.5.1
[ 2.008770] Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[ 2.015442] msgmni has been set to 7664
[ 2.019061] alg: No test for stdrng (krng)
[ 2.022669] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252)
[ 2.030842] io scheduler noop registered
[ 2.033607] io scheduler anticipatory registered
[ 2.039146] io scheduler deadline registered
[ 2.044826] io scheduler cfq registered (default)
[ 2.116820] pcieport-driver 0000:00:01.0: found MSI capability
[ 2.117064] pcieport-driver 0000:00:1c.0: found MSI capability
[ 2.117414] pcieport-driver 0000:00:1c.4: found MSI capability
[ 2.117744] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[ 2.117973] input: Power Button (FF) as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input0
[ 2.117979] ACPI: Power Button (FF) [PWRF]
[ 2.118083] input: Power Button (CM) as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input1
[ 2.118089] ACPI: Power Button (CM) [VBTN]
[ 2.228647] Event-channel device installed.
[ 2.228651] ***blkif_init
[ 2.242443] hpet_acpi_add: no address or irqs in _CRS
[ 2.242566] Non-volatile memory driver v1.2
[ 2.242570] Linux agpgart interface v0.103
[ 2.242716] [drm] Initialized drm 1.1.0 20060810
[ 2.242779] Serial: 8250/16550 driver4 ports, IRQ sharing enabled
[ 2.245720] brd: module loaded
[ 2.246729] loop: module loaded
[ 2.246783] Intel(R) PRO/1000 Network Driver - version 7.3.20-k3-NAPI
[ 2.246788] Copyright (c) 1999-2006 Intel Corporation.
[ 2.246851] e100: Intel(R) PRO/100 Network Driver, 3.5.23-k6-NAPI
[ 2.246855] e100: Copyright(c) 1999-2006 Intel Corporation
[ 2.246930] tg3.c:v3.94 (August 14, 2008)
[ 2.246951] vendor=8086 device=2847
[ 2.246957] xen_allocate_pirq: returning irq 29 for gsi 16
[ 2.246962] xen_set_ioapic_routing: irq 29 gsi 16 vector 144 ioapic 0 pin 16 triggering 0 polarity 1
[ 2.246972] tg3 0000:03:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 29
[ 2.246977] xen: PCI device 0000:03:00.0 pin 1 -> irq 29
[ 2.257114] eth0: Tigon3 [partno(BCM95754) rev b002 PHY(5787)] (PCI Express) 10/100/1000Base-T Ethernet 00:1a:a0:a9:f2:81
[ 2.257121] eth0: RXcsums[1] LinkChgREG[0] MIirq[0] ASF[0] WireSpeed[1] TSOcap[1]
[ 2.257126] eth0: dma_rwctrl[76180000] dma_mask[64-bit]
[ 2.257179] sky2 driver version 1.22
[ 2.257461] console [netcon0] enabled
[ 2.257478] netconsole: network logging started
[ 2.257649] input: Macintosh mouse button emulation as /devices/virtual/input/input2
[ 2.257761] Loading iSCSI transport class v2.0-870.
[ 2.258118] Driver 'sd' needs updating - please use bus_type methods
[ 2.258910] Driver 'sr' needs updating - please use bus_type methods
[ 2.259064] BUG: unable to handle kernel NULL pointer dereference at 0000000000000500
[ 2.259066] IP: [<ffffffff81017c03>] free_thread_xstate+0xc/0x33
[ 2.259074] PGD 0
[ 2.259075] Thread overran stack, or stack corrupted
[ 2.259076] Oops: 0000 [#1] SMP
[ 2.259078] last sysfs file:
[ 2.259079] CPU 0
[ 2.259081] Modules linked in:
[ 2.259083] Pid: 0, comm: swapper Tainted: G W 2.6.28-rc6-tip #1
[ 2.259084] RIP: e030:[<ffffffff81017c03>] [<ffffffff81017c03>] free_thread_xstate+0xc/0x33
[ 2.259088] RSP: e02b:ffffffff818e8de0 EFLAGS: 00010282
[ 2.259089] RAX: 0000000000000000 RBX: 0000000000000000 RCX: 0000000000000000
[ 2.259091] RDX: ffffffff810b3f31 RSI: 0000000000000000 RDI: 0000000000000000
[ 2.259093] RBP: ffffffff818e8df0 R08: 0000000000000000 R09: 0000000000000100
[ 2.259094] R10: 0000000000000001 R11: 0000000000000000 R12: 0000000000000000
[ 2.259096] R13: 0000000000000005 R14: 0000000000000005 R15: 000000000000000a
[ 2.259101] FS: 0000000000000000(0000) GS:ffffffff817f1a00(0000) knlGS:0000000000000000
[ 2.259102] CS: e033 DS: 0000 ES: 0000 CR0: 000000008005003b
[ 2.259104] CR2: 0000000000000500 CR3: 0000000001001000 CR4: 0000000000002620
[ 2.259106] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
[ 2.259108] DR3: 0000000000000000 DR6: 00000000ffff0ff0 DR7: 0000000000000400
[ 2.259110] Process swapper (pid: 0, threadinfo ffffffff817fc000, task ffffffff816d2330)
[ 2.259111] Stack:
[ 2.259112] 0000000000000000 ffff8800ec0c0000 ffffffff818e8e10 ffffffff81017c3e
[ 2.259115] ffffffff818e8e10 ffff8800ec0b15f0 ffffffff818e8e30 ffffffff81040e24
[ 2.259117] ffffffff818e8e30 ffff8800ec0b15f0 ffffffff818e8e50 ffffffff810420f7
[ 2.259120] Call Trace:
[ 2.259122] <IRQ> <0> [<ffffffff81017c3e>] free_thread_info+0x14/0x25
[ 2.259125] [<ffffffff81040e24>] free_task+0x21/0x34
[ 2.259129] [<ffffffff810420f7>] __put_task_struct+0xad/0xb1
[ 2.259131] [<ffffffff810444fa>] put_task_struct+0x14/0x16
[ 2.259134] [<ffffffff8104450c>] delayed_put_task_struct+0x10/0x12
[ 2.259136] [<ffffffff810832c5>] __rcu_process_callbacks+0x17c/0x206
[ 2.259140] [<ffffffff81083375>] rcu_process_callbacks+0x26/0x4a
[ 2.259142] [<ffffffff81047ef6>] __do_softirq+0x7e/0x123
[ 2.259145] [<ffffffff8101271c>] call_softirq+0x1c/0x30
[ 2.259148] [<ffffffff81013b07>] do_softirq+0x44/0x8d
[ 2.259151] [<ffffffff81047dcb>] irq_exit+0x3f/0x8e
[ 2.259153] [<ffffffff81201c51>] xen_evtchn_do_upcall+0x130/0x148
[ 2.259158] [<ffffffff8101276e>] xen_do_hypervisor_callback+0x1e/0x30
[ 2.259161] <EOI> <0> [<ffffffff810093aa>] ? _stext+0x3aa/0x1000
[ 2.259164] [<ffffffff810093aa>] ? _stext+0x3aa/0x1000
[ 2.259166] [<ffffffff8100d9e5>] ? xen_safe_halt+0x10/0x1a
[ 2.259170] [<ffffffff8100bccf>] ? xen_idle+0x4f/0x64
[ 2.259172] [<ffffffff8101003d>] ? cpu_idle+0x51/0x80
[ 2.259174] [<ffffffff8147b50d>] ? rest_init+0x61/0x63
[ 2.259179] [<ffffffff81826d75>] ? start_kernel+0x393/0x39e
[ 2.259183] [<ffffffff818262be>] ? x86_64_start_reservations+0xa9/0xad
[ 2.259185] [<ffffffff8182cdcb>] ? xen_start_kernel+0x6a4/0x6b3
[ 2.259188] Code: 04 00 ba 40 00 00 00 48 c7 c7 28 f2 60 81 48 89 e5 e8 65 e2 09 00 48 89 05 3b 20 8e 00 c9 c3 55 48 89 e5 53 48 89 fb 48 83 ec 08 <48> 8b b7 00 05 00 00 48 85 f6 74 17 48 8b 3d 1a 20 8e 00 e8 91
[ 2.259205] RIP [<ffffffff81017c03>] free_thread_xstate+0xc/0x33
[ 2.259207] RSP <ffffffff818e8de0>
[ 2.259208] CR2: 0000000000000500
[ 2.259211] ---[ end trace 4eaa2a86a8e2da22 ]---
[ 2.259212] Kernel panic - not syncing: Fatal exception in interrupt
[ 2.259214] Pid: 0, comm: swapper Tainted: G D W 2.6.28-rc6-tip #1
[ 2.259216] Call Trace:
[ 2.259216] <IRQ> [<ffffffff81042e01>] panic+0xa0/0x159
[ 2.259222] [<ffffffff8101410d>] ? show_registers+0x1f7/0x206
[ 2.259225] [<ffffffff8121c229>] ? do_unblank_screen+0x1d/0x119
[ 2.259228] [<ffffffff81042ac9>] ? print_oops_end_marker+0x1e/0x20
[ 2.259231] [<ffffffff8149bbc8>] oops_end+0xc7/0xd7
[ 2.259233] [<ffffffff8149d685>] do_page_fault+0x926/0x9e8
[ 2.259236] [<ffffffff8149b0f5>] page_fault+0x25/0x30
[ 2.259239] [<ffffffff810b3f31>] ? kmem_cache_free+0x85/0x93
[ 2.259242] [<ffffffff81017c03>] ? free_thread_xstate+0xc/0x33
[ 2.259244] [<ffffffff81017c3e>] free_thread_info+0x14/0x25
[ 2.259247] [<ffffffff81040e24>] free_task+0x21/0x34
[ 2.259249] [<ffffffff810420f7>] __put_task_struct+0xad/0xb1
[ 2.259251] [<ffffffff810444fa>] put_task_struct+0x14/0x16
[ 2.259254] [<ffffffff8104450c>] delayed_put_task_struct+0x10/0x12
[ 2.259256] [<ffffffff810832c5>] __rcu_process_callbacks+0x17c/0x206
[ 2.259259] [<ffffffff81083375>] rcu_process_callbacks+0x26/0x4a
[ 2.259261] [<ffffffff81047ef6>] __do_softirq+0x7e/0x123
[ 2.259264] [<ffffffff8101271c>] call_softirq+0x1c/0x30
[ 2.259266] [<ffffffff81013b07>] do_softirq+0x44/0x8d
[ 2.259268] [<ffffffff81047dcb>] irq_exit+0x3f/0x8e
[ 2.259271] [<ffffffff81201c51>] xen_evtchn_do_upcall+0x130/0x148
[ 2.259274] [<ffffffff8101276e>] xen_do_hypervisor_callback+0x1e/0x30
[ 2.259275] <EOI> [<ffffffff810093aa>] ? _stext+0x3aa/0x1000
[ 2.259279] [<ffffffff810093aa>] ? _stext+0x3aa/0x1000
[ 2.259282] [<ffffffff8100d9e5>] ? xen_safe_halt+0x10/0x1a
[ 2.259284] [<ffffffff8100bccf>] ? xen_idle+0x4f/0x64
[ 2.259286] [<ffffffff8101003d>] ? cpu_idle+0x51/0x80
[ 2.259288] [<ffffffff8147b50d>] ? rest_init+0x61/0x63
[ 2.259291] [<ffffffff81826d75>] ? start_kernel+0x393/0x39e
[ 2.259293] [<ffffffff818262be>] ? x86_64_start_reservations+0xa9/0xad
[ 2.259296] [<ffffffff8182cdcb>] ? xen_start_kernel+0x6a4/0x6b3
__ __ _____ _ _ _ _ _
\ \/ /___ _ __ |___ /| || | _ _ _ __ ___| |_ __ _| |__ | | ___
\ // _ \ '_ \ |_ \| || |_ __| | | | '_ \/ __| __/ _` | '_ \| |/ _ \
/ \ __/ | | | ___) |__ _|__| |_| | | | \__ \ || (_| | |_) | | __/
/_/\_\___|_| |_| |____(_) |_| \__,_|_| |_|___/\__\__,_|_.__/|_|\___|
(XEN) Xen version 3.4-unstable (deshantm@) (gcc version 4.2.4 (Ubuntu 4.2.4-3ubuntu4)) Wed Nov 26 16:27:34 EST 2008
(XEN) Latest ChangeSet: Wed Nov 19 19:13:22 2008 +0000 18796:98d48f7680db
(XEN) Command line: loglvl=all guest_loglvl=all com1=115200,8n1 console=com1 nousb
(XEN) Video information:
(XEN) VGA is text mode 80x25, font 8x16
(XEN) VBE/DDC methods: V2; EDID transfer time: 1 seconds
(XEN) Disc information:
(XEN) Found 2 MBR signatures
(XEN) Found 2 EDD information structures
(XEN) Xen-e820 RAM map:
(XEN) 0000000000000000 - 000000000009fc00 (usable)
(XEN) 00000000000f0000 - 0000000000100000 (reserved)
(XEN) 0000000000100000 - 00000000cfdffc00 (usable)
(XEN) 00000000cfdffc00 - 00000000cfe01c00 (ACPI NVS)
(XEN) 00000000cfe03c00 - 00000000cfe53c00 (reserved)
(XEN) 00000000cfe53c00 - 00000000cfe55c00 (ACPI data)
(XEN) 00000000cfe55c00 - 00000000d0000000 (reserved)
(XEN) 00000000e0000000 - 00000000f0000000 (reserved)
(XEN) 00000000fec00000 - 00000000fed00400 (reserved)
(XEN) 00000000fed20000 - 00000000feda0000 (reserved)
(XEN) 00000000fee00000 - 00000000fef00000 (reserved)
(XEN) 00000000ffb00000 - 0000000100000000 (reserved)
(XEN) 0000000100000000 - 000000012c000000 (usable)
(XEN) System RAM: 4029MB (4126328kB)
(XEN) ACPI: RSDP 000FEBF0, 0024 (r2 DELL )
(XEN) ACPI: XSDT 000FCE97, 0084 (r1 DELL B8K 15 ASL 61)
(XEN) ACPI: FACP 000FCFBF, 00F4 (r3 DELL B8K 15 ASL 61)
(XEN) ACPI: DSDT FFF68960, 475F (r1 DELL dt_ex 1000 INTL 20050624)
(XEN) ACPI: FACS CFDFFC00, 0040
(XEN) ACPI: SSDT FFF6D397, 009A (r1 DELL st_ex 1000 INTL 20050624)
(XEN) ACPI: APIC 000FD0B3, 0092 (r1 DELL B8K 15 ASL 61)
(XEN) ACPI: BOOT 000FD145, 0028 (r1 DELL B8K 15 ASL 61)
(XEN) ACPI: ASF! 000FD16D, 0092 (r32 DELL B8K 15 ASL 61)
(XEN) ACPI: MCFG 000FD1FF, 003E (r1 DELL B8K 15 ASL 61)
(XEN) ACPI: HPET 000FD23D, 0038 (r1 DELL B8K 15 ASL 61)
(XEN) ACPI: TCPA 000FD499, 0032 (r1 DELL B8K 15 ASL 61)
(XEN) ACPI: SLIC 000FD275, 0176 (r1 DELL B8K 15 ASL 61)
(XEN) ACPI: SSDT CFDFFC40, 01F9 (r1 DpgPmm Cpu0Ist 11 INTL 20050624)
(XEN) ACPI: SSDT CFE00049, 01F9 (r1 DpgPmm Cpu1Ist 11 INTL 20050624)
(XEN) ACPI: SSDT CFE00452, 0140 (r1 DpgPmm CpuPm 10 INTL 20050624)
(XEN) NUMA turned off
(XEN) Faking a node at 0000000000000000-000000012c000000
(XEN) Xen heap: 14MB (14612kB)
(XEN) Domain heap initialised
(XEN) found SMP MP-table at 000fe710
(XEN) DMI 2.3 present.
(XEN) Using APIC driver default
(XEN) ACPI: PM-Timer IO Port: 0x808
(XEN) ACPI: ACPI SLEEP INFO: pm1x_cnt[804,0], pm1x_evt[800,0]
(XEN) ACPI: wakeup_vec[cfdffc0c], vec_size[20]
(XEN) ACPI: Local APIC address 0xfee00000
(XEN) ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
(XEN) Processor #0 6:15 APIC version 20
(XEN) ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled)
(XEN) Processor #1 6:15 APIC version 20
(XEN) ACPI: LAPIC (acpi_id[0x03] lapic_id[0x05] disabled)
(XEN) ACPI: LAPIC (acpi_id[0x04] lapic_id[0x07] disabled)
(XEN) ACPI: LAPIC (acpi_id[0x05] lapic_id[0x00] disabled)
(XEN) ACPI: LAPIC (acpi_id[0x06] lapic_id[0x01] disabled)
(XEN) ACPI: LAPIC (acpi_id[0x07] lapic_id[0x02] disabled)
(XEN) ACPI: LAPIC (acpi_id[0x08] lapic_id[0x03] disabled)
(XEN) ACPI: LAPIC_NMI (acpi_id[0xff] high level lint[0x1])
(XEN) ACPI: IOAPIC (id[0x08] address[0xfec00000] gsi_base[0])
(XEN) IOAPIC[0]: apic_id 8, version 32, address 0xfec00000, GSI 0-23
(XEN) ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
(XEN) ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
(XEN) ACPI: IRQ0 used by override.
(XEN) ACPI: IRQ2 used by override.
(XEN) ACPI: IRQ9 used by override.
(XEN) Enabling APIC mode: Flat. Using 1 I/O APICs
(XEN) ACPI: HPET id: 0x8086a201 base: 0xfed00000
(XEN) Using ACPI (MADT) for SMP configuration information
(XEN) Using scheduler: SMP Credit Scheduler (credit)
(XEN) Initializing CPU#0
(XEN) Detected 2394.054 MHz processor.
(XEN) CPU: L1 I cache: 32K, L1 D cache: 32K
(XEN) CPU: L2 cache: 4096K
(XEN) CPU: Physical Processor ID: 0
(XEN) CPU: Processor Core ID: 0
(XEN) HVM: VMX enabled
(XEN) CPU0: Intel(R) Core(TM)2 CPU 6600 @ 2.40GHz stepping 06
(XEN) Booting processor 1/1 eip 8c000
(XEN) Initializing CPU#1
(XEN) CPU: L1 I cache: 32K, L1 D cache: 32K
(XEN) CPU: L2 cache: 4096K
(XEN) CPU: Physical Processor ID: 0
(XEN) CPU: Processor Core ID: 1
(XEN) CPU1: Intel(R) Core(TM)2 CPU 6600 @ 2.40GHz stepping 06
(XEN) Total of 2 processors activated.
(XEN) ENABLING IO-APIC IRQs
(XEN) -> Using new ACK method
(XEN) ..TIMER: vector=0xF0 apic1=0 pin1=2 apic2=-1 pin2=-1
(XEN) checking TSC synchronization across 2 CPUs: passed.
(XEN) Platform timer is 14.318MHz HPET
(XEN) Brought up 2 CPUs
(XEN) I/O virtualisation disabled
(XEN) ACPI sleep modes: S3
(XEN) MCA: Machine check polling timer started.
(XEN) *** LOADING DOMAIN 0 ***
(XEN) Xen kernel: 64-bit, lsb, compat32
(XEN) Dom0 kernel: 64-bit, PAE, lsb, paddr 0x1000000 -> 0x19d72ec
(XEN) PHYSICAL MEMORY ARRANGEMENT:
(XEN) Dom0 alloc.: 0000000124000000->0000000128000000 (962060 pages to be allocated)
(XEN) VIRTUAL MEMORY ARRANGEMENT:
(XEN) Loaded kernel: ffffffff81000000->ffffffff819d72ec
(XEN) Init. ramdisk: ffffffff819d8000->ffffffff82408600
(XEN) Phys-Mach map: ffffffff82409000->ffffffff82b80060
(XEN) Start info: ffffffff82b81000->ffffffff82b814a4
(XEN) Page tables: ffffffff82b82000->ffffffff82b9d000
(XEN) Boot stack: ffffffff82b9d000->ffffffff82b9e000
(XEN) TOTAL: ffffffff80000000->ffffffff83000000
(XEN) ENTRY ADDRESS: ffffffff81826200
(XEN) Dom0 has maximum 2 VCPUs
(XEN) Scrubbing Free RAM: .done.
(XEN) Xen trace buffers: disabled
(XEN) Std. Loglevel: All
(XEN) Guest Loglevel: All
(XEN) *** Serial input -> DOM0 (type 'CTRL-a' three times to switch input to Xen)
(XEN) Freed 108kB init memory.
mapping kernel into physical memory
Xen: setup ISA identity maps
about to get started...
[ 0.000000] PAT disabled on Xen
[ 0.000000] Initializing cgroup subsys cpuset
[ 0.000000] Initializing cgroup subsys cpu
[ 0.000000] Linux version 2.6.28-rc6-tip (deshantm@xen-kvm) (gcc version 4.2.4 (Ubuntu 4.2.4-3ubuntu4)) #1 SMP Sat Nov 29 19:14:57 EST 2008
[ 0.000000] Command line: root=/dev/sda1 ro console=hvc0 earlyprintk=xen xencons=ttyS0,115200
[ 0.000000] KERNEL supported cpus:
[ 0.000000] Intel GenuineIntel
[ 0.000000] AMD AuthenticAMD
[ 0.000000] Centaur CentaurHauls
[ 0.000000] BIOS-provided physical RAM map:
[ 0.000000] Xen: 0000000000000000 - 00000000000a0000 (usable)
[ 0.000000] Xen: 00000000000a0000 - 0000000000100000 (reserved)
[ 0.000000] Xen: 0000000000100000 - 0000000002409000 (usable)
[ 0.000000] Xen: 0000000002409000 - 0000000002b82000 (reserved)
[ 0.000000] Xen: 0000000002b82000 - 00000000eee0c000 (usable)
[ 0.000000] console [xenboot0] enabled
[ 0.000000] DMI 2.3 present.
[ 0.000000] last_pfn = 0xeee0c max_arch_pfn = 0x3ffffffff
[ 0.000000] init_memory_mapping: 0000000000000000-00000000eee0c000
[ 0.000000] last_map_addr: eee0c000 end: eee0c000
[ 0.000000] RAMDISK: 019d8000 - 02408600
[ 0.000000] ACPI: RSDP 000FEBF0, 0024 (r2 DELL )
[ 0.000000] ACPI: XSDT 000FCE97, 0084 (r1 DELL B8K 15 ASL 61)
[ 0.000000] ACPI: FACP 000FCFBF, 00F4 (r3 DELL B8K 15 ASL 61)
[ 0.000000] ACPI: DSDT FFF68960, 475F (r1 DELL dt_ex 1000 INTL 20050624)
[ 0.000000] ACPI: FACS CFDFFC00, 0040
[ 0.000000] ACPI: SSDT FFF6D397, 009A (r1 DELL st_ex 1000 INTL 20050624)
[ 0.000000] ACPI: APIC 000FD0B3, 0092 (r1 DELL B8K 15 ASL 61)
[ 0.000000] ACPI: BOOT 000FD145, 0028 (r1 DELL B8K 15 ASL 61)
[ 0.000000] ACPI: ASF! 000FD16D, 0092 (r32 DELL B8K 15 ASL 61)
[ 0.000000] ACPI: MCFG 000FD1FF, 003E (r1 DELL B8K 15 ASL 61)
[ 0.000000] ACPI: HPET 000FD23D, 0038 (r1 DELL B8K 15 ASL 61)
[ 0.000000] ACPI: TCPA 000FD499, 0032 (r1 DELL B8K 15 ASL 61)
[ 0.000000] ACPI: SLIC 000FD275, 0176 (r1 DELL B8K 15 ASL 61)
[ 0.000000] ACPI: SSDT CFDFFC40, 01F9 (r1 DpgPmm Cpu0Ist 11 INTL 20050624)
[ 0.000000] ACPI: SSDT CFE00049, 01F9 (r1 DpgPmm Cpu1Ist 11 INTL 20050624)
[ 0.000000] ACPI: SSDT CFE00452, 0140 (r1 DpgPmm CpuPm 10 INTL 20050624)
[ 0.000000] No NUMA configuration found
[ 0.000000] Faking a node at 0000000000000000-00000000eee0c000
[ 0.000000] Bootmem setup node 0 0000000000000000-00000000eee0c000
[ 0.000000] NODE_DATA [0000000000001000 - 0000000000005fff]
[ 0.000000] bootmap [0000000000008000 - 0000000000025dc7] pages 1e
[ 0.000000] (6 early reservations) ==> bootmem [0000000000 - 00eee0c000]
[ 0.000000] #0 [0000000000 - 0000001000] BIOS data page ==> [0000000000 - 0000001000]
[ 0.000000] #1 [0000006000 - 0000008000] TRAMPOLINE ==> [0000006000 - 0000008000]
[ 0.000000] #2 [0002b82000 - 0002b9d000] XEN PAGETABLES ==> [0002b82000 - 0002b9d000]
[ 0.000000] #3 [0001000000 - 00019d72ec] TEXT DATA BSS ==> [0001000000 - 00019d72ec]
[ 0.000000] #4 [00019d8000 - 0002408600] RAMDISK ==> [00019d8000 - 0002408600]
[ 0.000000] #5 [0000100000 - 000085f000] PGTABLE ==> [0000100000 - 000085f000]
[ 0.000000] found SMP MP-table at [ffff8800000fe710] 000fe710
[ 0.000000] Zone PFN ranges:
[ 0.000000] DMA 0x00000000 -> 0x00001000
[ 0.000000] DMA32 0x00001000 -> 0x00100000
[ 0.000000] Normal 0x00100000 -> 0x00100000
[ 0.000000] Movable zone start PFN for each node
[ 0.000000] early_node_map[3] active PFN ranges
[ 0.000000] 0: 0x00000000 -> 0x000000a0
[ 0.000000] 0: 0x00000100 -> 0x00002409
[ 0.000000] 0: 0x00002b82 -> 0x000eee0c
[ 0.000000] ACPI: PM-Timer IO Port: 0x808
[ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x05] disabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x04] lapic_id[0x07] disabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x05] lapic_id[0x00] disabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x06] lapic_id[0x01] disabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x07] lapic_id[0x02] disabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x08] lapic_id[0x03] disabled)
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0xff] high level lint[0x1])
[ 0.000000] ACPI: IOAPIC (id[0x08] address[0xfec00000] gsi_base[0])
[ 0.000000] IOAPIC[0]: apic_id 8, version 0, address 0xfec00000, GSI 0-23
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[ 0.000000] ACPI: HPET id: 0x8086a201 base: 0xfed00000
[ 0.000000] Using ACPI (MADT) for SMP configuration information
[ 0.000000] SMP: Allowing 2 CPUs, 0 hotplug CPUs
(XEN) io_apic.c:2203:
(XEN) ioapic_guest_write: apic=0, pin=2, old_irq=0, new_irq=-1
(XEN) ioapic_guest_write: old_entry=000009f0, new_entry=00010900
(XEN) ioapic_guest_write: Attempt to remove IO-APIC pin of in-use IRQ!
(XEN) io_apic.c:2203:
(XEN) ioapic_guest_write: apic=0, pin=4, old_irq=4, new_irq=-1
(XEN) ioapic_guest_write: old_entry=000009f1, new_entry=00010900
(XEN) ioapic_guest_write: Attempt to remove IO-APIC pin of in-use IRQ!
[ 0.000000] PM: Registered nosave memory: 00000000000a0000 - 0000000000100000
[ 0.000000] PM: Registered nosave memory: 0000000002409000 - 0000000002b82000
[ 0.000000] Allocating PCI resources starting at f0000000 (gap: eee0c000:111f4000)
[ 0.000000] PERCPU: Allocating 65536 bytes of per cpu data
[ 0.000000] Built 1 zonelists in Node order, mobility grouping on. Total pages: 961165
[ 0.000000] Policy zone: DMA32
[ 0.000000] Kernel command line: root=/dev/sda1 ro console=hvc0 earlyprintk=xen xencons=ttyS0,115200
[ 0.000000] Initializing CPU#0
[ 0.000000] xen: allocated irq 9 for acpi 9
[ 0.000000] PID hash table entries: 4096 (order: 12, 32768 bytes)
[ 0.000000] Detected 2394.054 MHz processor.
[ 0.000999] Console: colour dummy device 80x25
[ 0.000999] console handover: boot [xenboot0] -> real [hvc0]
[ 0.000999] Checking aperture...
[ 0.000999] No AGP bridge found
[ 0.000999] PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
[ 0.000999] Placing software IO TLB between 0x1c0000 - 0x11df3c000
[ 0.000999] Memory: 3757400k/3913776k available (4742k kernel code, 8036k absent, 148340k reserved, 3080k data, 604k init)
[ 0.000999] SLUB: Genslabs=13, HWalign=64, Order=0-3, MinObjects=0, CPUs=2, Nodes=1
[ 0.000999] installing Xen timer for CPU 0
[ 0.000999] Calibrating delay loop (skipped), value calculated using timer frequency.. 4788.10 BogoMIPS (lpj=2394054)
[ 0.000999] Security Framework initialized
[ 0.000999] SELinux: Initializing.
[ 0.000999] Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes)
[ 0.003098] Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes)
[ 0.004086] Mount-cache hash table entries: 256
[ 0.004251] Initializing cgroup subsys ns
[ 0.004259] Initializing cgroup subsys cpuacct
[ 0.004297] CPU: L1 I cache: 32K, L1 D cache: 32K
[ 0.004301] CPU: L2 cache: 4096K
[ 0.004306] CPU 0/0x0 -> Node 0
[ 0.004309] CPU: Physical Processor ID: 0
[ 0.004312] CPU: Processor Core ID: 0
[ 0.004325] SMP alternatives: switching to UP code
[ 0.031957] ACPI: Core revision 20080926
[ 0.235026] cpu 0 spinlock event irq 17
[ 0.235153] installing Xen timer for CPU 1
[ 0.235163] cpu 1 spinlock event irq 23
[ 0.235189] SMP alternatives: switching to SMP code
[ 0.000009] Initializing CPU#1
[ 0.000052] CPU: L1 I cache: 32K, L1 D cache: 32K
[ 0.000054] CPU: L2 cache: 4096K
[ 0.000056] CPU 1/0x0 -> Node 0
[ 0.000058] CPU: Physical Processor ID: 0
[ 0.000059] CPU: Processor Core ID: 0
[ 0.271373] Brought up 2 CPUs
[ 0.271538] khelper used greatest stack depth: 6344 bytes left
[ 0.271749] net_namespace: 1344 bytes
[ 0.271756] Booting paravirtualized kernel on Xen
[ 0.271760] Xen version: 3.4-unstable (preserve-AD) (dom0)
[ 0.271935] Grant table initialized
[ 0.271958] Time: 2:32:49 Date: 12/02/08
[ 0.271958] NET: Registered protocol family 16
[ 0.272410] khelper used greatest stack depth: 5944 bytes left
[ 0.272410] ACPI FADT declares the system doesn't support PCIe ASPM, so disable it
[ 0.272410] ACPI: bus type pci registered
[ 0.272410] PCI: MCFG configuration 0: base e0000000 segment 0 buses 0 - 255
[ 0.272410] PCI: Not using MMCONFIG.
[ 0.272410] PCI: Using configuration type 1 for base access
[ 0.336846] ACPI: Interpreter enabled
[ 0.336853] ACPI: (supports S0 S3 S4 S5)
[ 0.336872] ACPI: Using IOAPIC for interrupt routing
[ 0.336951] PCI: MCFG configuration 0: base e0000000 segment 0 buses 0 - 255
[ 0.400330] PCI: MCFG area at e0000000 reserved in ACPI motherboard resources
[ 0.400340] resource map sanity check conflict: 0xe0000000 0xefffffff 0x2b82000 0xeee0bfff System RAM
[ 0.400349] ------------[ cut here ]------------
[ 0.400353] WARNING: at arch/x86/mm/ioremap.c:226 __ioremap_caller+0xc7/0x28d()
[ 0.400358] Modules linked in:
[ 0.400362] Pid: 1, comm: swapper Not tainted 2.6.28-rc6-tip #1
[ 0.400367] Call Trace:
[ 0.400373] [<ffffffff81042d44>] warn_on_slowpath+0x58/0x75
[ 0.400380] [<ffffffff811e98b8>] ? acpi_ut_acquire_mutex+0x3e/0x92
[ 0.400385] [<ffffffff81043a34>] ? printk+0x67/0x69
[ 0.400390] [<ffffffff81048bae>] ? iomem_map_sanity_check+0x87/0xb9
[ 0.400395] [<ffffffff811e97a9>] ? acpi_ut_release_mutex+0x5d/0x61
[ 0.400401] [<ffffffff8102fb07>] __ioremap_caller+0xc7/0x28d
[ 0.400407] [<ffffffff818552f6>] ? pci_mmcfg_arch_init+0x90/0x11d
[ 0.400413] [<ffffffff810b49ce>] ? __kmalloc+0xaa/0xd1
[ 0.400418] [<ffffffff8102fda2>] ioremap_nocache+0x12/0x14
[ 0.400423] [<ffffffff818552f6>] pci_mmcfg_arch_init+0x90/0x11d
[ 0.400455] [<ffffffff81855de0>] __pci_mmcfg_init+0x267/0x298
[ 0.400461] [<ffffffff8184b93c>] ? acpi_init+0x0/0x239
[ 0.400466] [<ffffffff8184b93c>] ? acpi_init+0x0/0x239
[ 0.400471] [<ffffffff81855e1c>] pci_mmcfg_late_init+0xb/0xd
[ 0.400476] [<ffffffff8184bad8>] acpi_init+0x19c/0x239
[ 0.400480] [<ffffffff8184a212>] ? fbmem_init+0x0/0x91
[ 0.400486] [<ffffffff8100a056>] do_one_initcall+0x56/0x138
[ 0.400491] [<ffffffff81082989>] ? register_irq_proc+0xa1/0xbd
[ 0.400497] [<ffffffff810f0000>] ? load_elf_binary+0x1341/0x1805
[ 0.400503] [<ffffffff8182698e>] kernel_init+0x12c/0x180
[ 0.400509] [<ffffffff81012619>] child_rip+0xa/0x21
[ 0.400514] [<ffffffff81011f2d>] ? retint_restore_args+0x5/0x20
[ 0.400519] [<ffffffff8101260f>] ? child_rip+0x0/0x21
[ 0.400527] ---[ end trace 4eaa2a86a8e2da22 ]---
[ 0.400532] PCI: Cannot map mmconfig aperture for segment 0
[ 0.471922] ACPI: ACPI Dock Station Driver: 1 docks/bays found
[ 0.471936] ACPI: PCI Root Bridge [PCI0] (0000:00)
[ 0.472111] pci 0000:00:01.0: PME# supported from D0 D3hot D3cold
[ 0.472119] pci 0000:00:01.0: PME# disabled
[ 0.472308] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
[ 0.472316] pci 0000:00:1b.0: PME# disabled
[ 0.472396] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
[ 0.472404] pci 0000:00:1c.0: PME# disabled
[ 0.472493] pci 0000:00:1c.4: PME# supported from D0 D3hot D3cold
[ 0.472500] pci 0000:00:1c.4: PME# disabled
[ 0.472701] pci 0000:00:1f.0: quirk: region 0800-087f claimed by ICH6 ACPI/GPIO/TCO
[ 0.472708] pci 0000:00:1f.0: quirk: region 0880-08bf claimed by ICH6 GPIO
[ 0.472836] pci 0000:00:1f.2: PME# supported from D3hot
[ 0.472843] pci 0000:00:1f.2: PME# disabled
[ 0.472989] pci 0000:00:1f.5: PME# supported from D3hot
[ 0.472996] pci 0000:00:1f.5: PME# disabled
[ 0.473570] pci 0000:03:00.0: PME# supported from D3hot D3cold
[ 0.473579] pci 0000:03:00.0: PME# disabled
[ 0.473789] pci 0000:04:02.0: PME# supported from D1 D2 D3hot D3cold
[ 0.473798] pci 0000:04:02.0: PME# disabled
[ 0.473868] pci 0000:00:1e.0: transparent bridge
[ 1.002846] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 9 10 *11 12 15)
[ 1.003663] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 9 *10 11 12 15)
[ 1.004431] ACPI: PCI Interrupt Link [LNKC] (IRQs *3 4 5 6 7 9 10 11 12 15)
[ 1.005216] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 9 10 11 12 15) *0, disabled.
[ 1.005997] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 *9 10 11 12 15)
[ 1.006807] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 9 10 11 12 15) *0, disabled.
[ 1.007548] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 7 *9 10 11 12 15)
[ 1.008320] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 *5 6 7 9 10 11 12 15)
[ 1.008550] ACPI Warning (tbutils-0217): Incorrect checksum in table [TCPA] - 00, should be 88 [20080926]
[ 1.008550] xen_balloon: Initialising balloon driver.
[ 1.009033] SCSI subsystem initialized
[ 1.009033] usbcore: registered new interface driver usbfs
[ 1.009033] usbcore: registered new interface driver hub
[ 1.009033] usbcore: registered new device driver usb
[ 1.009990] PCI: Using ACPI for IRQ routing
[ 1.009990] pci 0000:00:01.0: BAR 9: can't allocate resource
[ 1.010000] pci 0000:01:00.0: BAR 0: can't allocate resource
[ 1.017015] cfg80211: Using static regulatory domain info
[ 1.017015] cfg80211: Regulatory domain: US
[ 1.017015] (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
[ 1.017015] (2402000 KHz - 2472000 KHz @ 40000 KHz), (600 mBi, 2700 mBm)
[ 1.017015] (5170000 KHz - 5190000 KHz @ 40000 KHz), (600 mBi, 2300 mBm)
[ 1.017015] (5190000 KHz - 5210000 KHz @ 40000 KHz), (600 mBi, 2300 mBm)
[ 1.017015] (5210000 KHz - 5230000 KHz @ 40000 KHz), (600 mBi, 2300 mBm)
[ 1.017015] (5230000 KHz - 5330000 KHz @ 40000 KHz), (600 mBi, 2300 mBm)
[ 1.017015] (5735000 KHz - 5835000 KHz @ 40000 KHz), (600 mBi, 3000 mBm)
[ 1.017021] cfg80211: Calling CRDA for country: US
[ 1.017058] NetLabel: Initializing
[ 1.017058] NetLabel: domain hash size = 128
[ 1.017058] NetLabel: protocols = UNLABELED CIPSOv4
[ 1.017058] NetLabel: unlabeled traffic allowed by default
[ 1.017058] Xen: Initializing Xen DMA ops
[ 1.017058] Xen: Enabling DMA fallback to swiotlb
[ 1.017058] PCI-GART: No AMD GART found.
[ 1.019140] pnp: PnP ACPI init
[ 1.019153] ACPI: bus type pnp registered
[ 1.032407] pnp 00:01: io resource (0x800-0x85f) overlaps 0000:00:1f.0 BAR 7 (0x800-0x87f), disabling
[ 1.032413] pnp 00:01: io resource (0x860-0x8ff) overlaps 0000:00:1f.0 BAR 7 (0x800-0x87f), disabling
[ 1.032673] system 00:01: ioport range 0xc00-0xc7f has been reserved
[ 1.033402] xen_set_ioapic_routing: irq 13 gsi 13 vector 112 ioapic 0 pin 13 triggering 1 polarity 0
[ 1.034076] xen_set_ioapic_routing: irq 8 gsi 8 vector 72 ioapic 0 pin 8 triggering 1 polarity 0
[ 1.051269] xen_set_ioapic_routing: irq 4 gsi 4 vector 241 ioapic 0 pin 4 triggering 1 polarity 0
(XEN) io_apic.c:2216:
(XEN) ioapic_guest_write: apic=0, pin=4, old_irq=4, new_irq=4
(XEN) ioapic_guest_write: old_entry=000009f1, new_entry=000189f1
(XEN) ioapic_guest_write: Attempt to modify IO-APIC pin for in-use IRQ!
[ 1.075141] pnp 00:07: mem resource (0x0-0x9ffff) overlaps 0000:01:00.0 BAR 0 (0x0-0xfffffff), disabling
[ 1.075148] pnp 00:07: mem resource (0x100000-0xffffff) overlaps 0000:01:00.0 BAR 0 (0x0-0xfffffff), disabling
[ 1.075154] pnp 00:07: mem resource (0x1000000-0xcfdffbff) overlaps 0000:01:00.0 BAR 0 (0x0-0xfffffff), disabling
[ 1.075160] pnp 00:07: mem resource (0xf0000-0xfffff) overlaps 0000:01:00.0 BAR 0 (0x0-0xfffffff), disabling
[ 1.075166] pnp 00:07: mem resource (0xc0000-0xcffff) overlaps 0000:01:00.0 BAR 0 (0x0-0xfffffff), disabling
[ 1.075376] system 00:07: iomem range 0xfec00000-0xfecfffff has been reserved
[ 1.075382] system 00:07: iomem range 0xfee00000-0xfeefffff has been reserved
[ 1.075387] system 00:07: iomem range 0xffb00000-0xffbfffff has been reserved
[ 1.075392] system 00:07: iomem range 0xffc00000-0xffffffff has been reserved
[ 1.079440] system 00:08: ioport range 0x100-0x1fe has been reserved
[ 1.079445] system 00:08: ioport range 0x200-0x277 has been reserved
[ 1.079450] system 00:08: ioport range 0x280-0x2e7 has been reserved
[ 1.079454] system 00:08: ioport range 0x2f0-0x2f7 has been reserved
[ 1.079459] system 00:08: ioport range 0x300-0x377 has been reserved
[ 1.079463] system 00:08: ioport range 0x380-0x3bb has been reserved
[ 1.079468] system 00:08: ioport range 0x3c0-0x3e7 has been reserved
[ 1.079472] system 00:08: ioport range 0x3f6-0x3f7 has been reserved
[ 1.079477] system 00:08: ioport range 0x400-0x4cf has been reserved
[ 1.079481] system 00:08: ioport range 0x4d2-0x57f has been reserved
[ 1.079489] system 00:08: ioport range 0x580-0x677 has been reserved
[ 1.079494] system 00:08: ioport range 0x680-0x777 has been reserved
[ 1.079525] system 00:08: ioport range 0x780-0x7bb has been reserved
[ 1.079530] system 00:08: ioport range 0x7c0-0x7ff has been reserved
[ 1.079534] system 00:08: ioport range 0x8e0-0x8ff has been reserved
[ 1.079539] system 00:08: ioport range 0x900-0x9fe has been reserved
[ 1.079544] system 00:08: ioport range 0xa00-0xafe has been reserved
[ 1.079548] system 00:08: ioport range 0xb00-0xbfe has been reserved
[ 1.079553] system 00:08: ioport range 0xc80-0xcaf has been reserved
[ 1.079557] system 00:08: ioport range 0xcc0-0xcf7 has been reserved
[ 1.079562] system 00:08: ioport range 0xd00-0xdfe has been reserved
[ 1.079566] system 00:08: ioport range 0xe00-0xefe has been reserved
[ 1.079571] system 00:08: ioport range 0xf00-0xffe has been reserved
[ 1.079576] system 00:08: ioport range 0x2000-0x20fe has been reserved
[ 1.079580] system 00:08: ioport range 0x2100-0x21fe has been reserved
[ 1.079585] system 00:08: ioport range 0x2200-0x22fe has been reserved
[ 1.079590] system 00:08: ioport range 0x2300-0x23fe has been reserved
[ 1.079594] system 00:08: ioport range 0x2400-0x24fe has been reserved
[ 1.079599] system 00:08: ioport range 0x2500-0x25fe has been reserved
[ 1.079604] system 00:08: ioport range 0x2600-0x26fe has been reserved
[ 1.079608] system 00:08: ioport range 0x2700-0x27fe has been reserved
[ 1.079613] system 00:08: ioport range 0x2800-0x28fe has been reserved
[ 1.079618] system 00:08: ioport range 0x2900-0x29fe has been reserved
[ 1.079622] system 00:08: ioport range 0x2a00-0x2afe has been reserved
[ 1.079627] system 00:08: ioport range 0x2b00-0x2bfe has been reserved
[ 1.079632] system 00:08: ioport range 0x2c00-0x2cfe has been reserved
[ 1.079636] system 00:08: ioport range 0x2d00-0x2dfe has been reserved
[ 1.079643] system 00:08: ioport range 0x2e00-0x2efe has been reserved
[ 1.079648] system 00:08: ioport range 0x2f00-0x2ffe has been reserved
[ 1.079652] system 00:08: ioport range 0x5000-0x50fe has been reserved
[ 1.079657] system 00:08: ioport range 0x5100-0x51fe has been reserved
[ 1.079662] system 00:08: ioport range 0x5200-0x52fe has been reserved
[ 1.079666] system 00:08: ioport range 0x5300-0x53fe has been reserved
[ 1.079671] system 00:08: ioport range 0x5400-0x54fe has been reserved
[ 1.079676] system 00:08: ioport range 0x5500-0x55fe has been reserved
[ 1.079681] system 00:08: ioport range 0x5600-0x56fe has been reserved
[ 1.079685] system 00:08: ioport range 0x5700-0x57fe has been reserved
[ 1.079690] system 00:08: ioport range 0x5800-0x58fe has been reserved
[ 1.079695] system 00:08: ioport range 0x5900-0x59fe has been reserved
[ 1.079699] system 00:08: ioport range 0x5a00-0x5afe has been reserved
[ 1.079704] system 00:08: ioport range 0x5b00-0x5bfe has been reserved
[ 1.079709] system 00:08: ioport range 0x5c00-0x5cfe has been reserved
[ 1.079714] system 00:08: ioport range 0x5d00-0x5dfe has been reserved
[ 1.079718] system 00:08: ioport range 0x5e00-0x5efe has been reserved
[ 1.079723] system 00:08: ioport range 0x5f00-0x5ffe has been reserved
[ 1.079728] system 00:08: ioport range 0x6000-0x60fe has been reserved
[ 1.079733] system 00:08: ioport range 0x6100-0x61fe has been reserved
[ 1.079737] system 00:08: ioport range 0x6200-0x62fe has been reserved
[ 1.079742] system 00:08: ioport range 0x6300-0x63fe has been reserved
[ 1.079747] system 00:08: ioport range 0x6400-0x64fe has been reserved
[ 1.079752] system 00:08: ioport range 0x6500-0x65fe has been reserved
[ 1.079757] system 00:08: ioport range 0x6600-0x66fe has been reserved
[ 1.079761] system 00:08: ioport range 0x6700-0x67fe has been reserved
[ 1.079766] system 00:08: ioport range 0x6800-0x68fe has been reserved
[ 1.079771] system 00:08: ioport range 0x6900-0x69fe has been reserved
[ 1.079776] system 00:08: ioport range 0x6a00-0x6afe has been reserved
[ 1.080915] system 00:08: ioport range 0x6b00-0x6bfe has been reserved
[ 1.087838] system 00:08: ioport range 0x6c00-0x6cfe has been reserved
[ 1.093375] system 00:08: ioport range 0x6d00-0x6dfe has been reserved
[ 1.100298] system 00:08: ioport range 0x6e00-0x6efe has been reserved
[ 1.107223] system 00:08: ioport range 0x6f00-0x6ffe has been reserved
[ 1.114145] system 00:08: ioport range 0xa000-0xa0fe has been reserved
[ 1.119685] system 00:08: ioport range 0xa100-0xa1fe has been reserved
[ 1.126607] system 00:08: ioport range 0xa200-0xa2fe has been reserved
[ 1.133532] system 00:08: ioport range 0xa300-0xa3fe has been reserved
[ 1.140455] system 00:08: ioport range 0xa400-0xa4fe has been reserved
[ 1.145995] system 00:08: ioport range 0xa500-0xa5fe has been reserved
[ 1.152917] system 00:08: ioport range 0xa600-0xa6fe has been reserved
[ 1.159839] system 00:08: ioport range 0xa700-0xa7fe has been reserved
[ 1.166764] system 00:08: ioport range 0xa800-0xa8fe has been reserved
[ 1.172302] system 00:08: ioport range 0xa900-0xa9fe has been reserved
[ 1.179227] system 00:08: ioport range 0xaa00-0xaafe has been reserved
[ 1.186149] system 00:08: ioport range 0xab00-0xabfe has been reserved
[ 1.193074] system 00:08: ioport range 0xac00-0xacfe has been reserved
[ 1.198612] system 00:08: ioport range 0xad00-0xadfe has been reserved
[ 1.205537] system 00:08: ioport range 0xae00-0xaefe has been reserved
[ 1.212459] system 00:08: ioport range 0xaf00-0xaffe has been reserved
[ 1.219382] system 00:08: iomem range 0xe0000000-0xefffffff could not be reserved
[ 1.226306] system 00:08: iomem range 0xfeda0000-0xfedacfff has been reserved
[ 1.234919] pnp: PnP ACPI: found 10 devices
[ 1.237385] ACPI: ACPI bus type pnp unregistered
[ 1.248322] pci 0000:00:01.0: PCI bridge, secondary bus 0000:01
[ 1.249848] pci 0000:00:01.0: IO window: 0xd000-0xdfff
[ 1.254006] pci 0000:00:01.0: MEM window: 0xfe900000-0xfeafffff
[ 1.260926] pci 0000:00:01.0: PREFETCH window: 0x00000100000000-0x0000010fffffff
[ 1.267852] pci 0000:00:1c.0: PCI bridge, secondary bus 0000:02
[ 1.274821] pci 0000:00:1c.0: IO window: disabled
[ 1.278929] pci 0000:00:1c.0: MEM window: 0xfe800000-0xfe8fffff
[ 1.285853] pci 0000:00:1c.0: PREFETCH window: disabled
[ 1.290012] pci 0000:00:1c.4: PCI bridge, secondary bus 0000:03
[ 1.296925] pci 0000:00:1c.4: IO window: disabled
[ 1.301086] pci 0000:00:1c.4: MEM window: 0xfe700000-0xfe7fffff
[ 1.308008] pci 0000:00:1c.4: PREFETCH window: disabled
[ 1.312165] pci 0000:00:1e.0: PCI bridge, secondary bus 0000:04
[ 1.319083] pci 0000:00:1e.0: IO window: 0xc000-0xcfff
[ 1.323241] pci 0000:00:1e.0: MEM window: 0xfe500000-0xfe6fffff
[ 1.330162] pci 0000:00:1e.0: PREFETCH window: 0x000000f0000000-0x000000f00fffff
[ 1.338490] xen_set_ioapic_routing: irq 29 gsi 16 vector 144 ioapic 0 pin 16 triggering 0 polarity 1
[ 1.346779] pci 0000:00:01.0: PCI INT A -> GSI 16 (level, low) -> IRQ 29
[ 1.353698] xen: PCI device 0000:00:01.0 pin 1 -> irq 29
[ 1.359254] xen_allocate_pirq: returning irq 29 for gsi 16
[ 1.364777] xen_set_ioapic_routing: irq 29 gsi 16 vector 144 ioapic 0 pin 16 triggering 0 polarity 1
[ 1.374469] pci 0000:00:1c.0: PCI INT A -> GSI 16 (level, low) -> IRQ 29
[ 1.380007] xen: PCI device 0000:00:1c.0 pin 1 -> irq 29
[ 1.385564] xen_allocate_pirq: returning irq 29 for gsi 16
[ 1.391087] xen_set_ioapic_routing: irq 29 gsi 16 vector 144 ioapic 0 pin 16 triggering 0 polarity 1
[ 1.400779] pci 0000:00:1c.4: PCI INT A -> GSI 16 (level, low) -> IRQ 29
[ 1.407703] xen: PCI device 0000:00:1c.4 pin 1 -> irq 29
[ 1.413259] bus: 00 index 0 io port: [0x00-0xffff]
[ 1.417395] bus: 00 index 1 mmio: [0x000000-0xffffffffffffffff]
[ 1.424318] bus: 01 index 0 io port: [0xd000-0xdfff]
[ 1.428472] bus: 01 index 1 mmio: [0xfe900000-0xfeafffff]
[ 1.434009] bus: 01 index 2 mmio: [0x100000000-0x10fffffff]
[ 1.439549] bus: 01 index 3 mmio: [0x0-0x0]
[ 1.443704] bus: 02 index 0 mmio: [0x0-0x0]
[ 1.447856] bus: 02 index 1 mmio: [0xfe800000-0xfe8fffff]
[ 1.453396] bus: 02 index 2 mmio: [0x0-0x0]
[ 1.457549] bus: 02 index 3 mmio: [0x0-0x0]
[ 1.461704] bus: 03 index 0 mmio: [0x0-0x0]
[ 1.465859] bus: 03 index 1 mmio: [0xfe700000-0xfe7fffff]
[ 1.471397] bus: 03 index 2 mmio: [0x0-0x0]
[ 1.475551] bus: 03 index 3 mmio: [0x0-0x0]
[ 1.479706] bus: 04 index 0 io port: [0xc000-0xcfff]
[ 1.485244] bus: 04 index 1 mmio: [0xfe500000-0xfe6fffff]
[ 1.490784] bus: 04 index 2 mmio: [0xf0000000-0xf00fffff]
[ 1.496322] bus: 04 index 3 io port: [0x00-0xffff]
[ 1.501864] bus: 04 index 4 mmio: [0x000000-0xffffffffffffffff]
[ 1.507407] NET: Registered protocol family 2
[ 1.521384] IP route cache hash table entries: 131072 (order: 8, 1048576 bytes)
[ 1.523681] TCP established hash table entries: 524288 (order: 11, 8388608 bytes)
[ 1.530857] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
[ 1.532821] TCP: Hash tables configured (established 524288 bind 65536)
[ 1.539250] TCP reno registered
[ 1.546256] NET: Registered protocol family 1
[ 1.547671] checking if image is initramfs... it is
[ 1.564437] Freeing initrd memory: 10433k freed
[ 1.569677] Simple Boot Flag at 0x7a set to 0x1
(XEN) traps.c:2193:d0 Domain attempted WRMSR 000000000000008b from 000000c6:00000000 to 00000000:00000000.
(XEN) traps.c:2193:d0 Domain attempted WRMSR 000000000000008b from 000000c6:00000000 to 00000000:00000000.
[ 1.571416] Microcode Update Driver: v2.00 <tigran@aivazian.fsnet.co.uk>, Peter Oruba
[ 1.588118] audit: initializing netlink socket (disabled)
[ 1.593270] type=2000 audit(1228185171.419:1): initialized
[ 1.606456] HugeTLB registered 2 MB page size, pre-allocated 0 pages
[ 1.610241] VFS: Disk quotas dquot_6.5.1
[ 1.610397] Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[ 1.616591] msgmni has been set to 7664
[ 1.620309] alg: No test for stdrng (krng)
[ 1.623856] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252)
[ 1.632024] io scheduler noop registered
[ 1.634796] io scheduler anticipatory registered
[ 1.640329] io scheduler deadline registered
[ 1.646063] io scheduler cfq registered (default)
[ 1.718245] pcieport-driver 0000:00:01.0: found MSI capability
[ 1.718546] pcieport-driver 0000:00:1c.0: found MSI capability
[ 1.718841] pcieport-driver 0000:00:1c.4: found MSI capability
[ 1.719231] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[ 1.719568] input: Power Button (FF) as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input0
[ 1.719574] ACPI: Power Button (FF) [PWRF]
[ 1.719672] input: Power Button (CM) as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input1
[ 1.719678] ACPI: Power Button (CM) [VBTN]
[ 1.830787] Event-channel device installed.
[ 1.830791] ***blkif_init
[ 1.846520] hpet_acpi_add: no address or irqs in _CRS
[ 1.846648] Non-volatile memory driver v1.2
[ 1.846652] Linux agpgart interface v0.103
[ 1.846801] [drm] Initialized drm 1.1.0 20060810
[ 1.846848] Serial: 8250/16550 driver4 ports, IRQ sharing enabled
[ 1.850161] brd: module loaded
[ 1.851429] loop: module loaded
[ 1.851493] Intel(R) PRO/1000 Network Driver - version 7.3.20-k3-NAPI
[ 1.851497] Copyright (c) 1999-2006 Intel Corporation.
[ 1.851566] e100: Intel(R) PRO/100 Network Driver, 3.5.23-k6-NAPI
[ 1.851570] e100: Copyright(c) 1999-2006 Intel Corporation
[ 1.851647] tg3.c:v3.94 (August 14, 2008)
[ 1.851668] vendor=8086 device=2847
[ 1.851674] xen_allocate_pirq: returning irq 29 for gsi 16
[ 1.851680] xen_set_ioapic_routing: irq 29 gsi 16 vector 144 ioapic 0 pin 16 triggering 0 polarity 1
[ 1.851689] tg3 0000:03:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 29
[ 1.851694] xen: PCI device 0000:03:00.0 pin 1 -> irq 29
[ 1.861080] eth0: Tigon3 [partno(BCM95754) rev b002 PHY(5787)] (PCI Express) 10/100/1000Base-T Ethernet 00:1a:a0:a9:f2:81
[ 1.861087] eth0: RXcsums[1] LinkChgREG[0] MIirq[0] ASF[0] WireSpeed[1] TSOcap[1]
[ 1.861091] eth0: dma_rwctrl[76180000] dma_mask[64-bit]
[ 1.861146] sky2 driver version 1.22
[ 1.861420] console [netcon0] enabled
[ 1.861424] netconsole: network logging started
[ 1.861596] input: Macintosh mouse button emulation as /devices/virtual/input/input2
[ 1.861711] Loading iSCSI transport class v2.0-870.
[ 1.862099] Driver 'sd' needs updating - please use bus_type methods
[ 1.862180] Driver 'sr' needs updating - please use bus_type methods
[ 1.865080] ------------[ cut here ]------------
[ 1.866073] WARNING: at kernel/sched_fair.c:875 hrtick_start_fair+0x37/0x39()
[ 1.866073] Modules linked in:
[ 1.866073] Pid: 0, comm: swapper Tainted: G W 2.6.28-rc6-tip #1
[ 1.866073] Call Trace:
[ 1.866073] [<ffffffff81042d44>] warn_on_slowpath+0x58/0x75
[ 1.866073] [<ffffffff81028c27>] ? pvclock_clocksource_read+0x42/0x7b
[ 1.866073] [<ffffffff8100c1bf>] ? get_phys_to_machine+0x1a/0x31
[ 1.866073] [<ffffffff8100abff>] ? pfn_to_mfn+0x12/0x27
[ 1.866073] [<ffffffff8100df00>] ? xen_clocksource_read+0x21/0x23
[ 1.866073] [<ffffffff8100dfe0>] ? xen_sched_clock+0x1a/0x50
[ 1.866073] [<ffffffff810386f3>] ? __dequeue_entity+0x2e/0x33
[ 1.866073] [<ffffffff81038ca8>] hrtick_start_fair+0x37/0x39
[ 1.866073] [<ffffffff81038d36>] pick_next_task_fair+0x8c/0x98
[ 1.866073] [<ffffffff8103740c>] pick_next_task+0x1c/0x40
[ 1.866073] [<ffffffff81499281>] schedule+0x415/0x5fa
[ 1.866073] [<ffffffff810093aa>] ? _stext+0x3aa/0x1000
[ 1.866073] [<ffffffff81060fca>] ? tick_nohz_restart_sched_tick+0x16e/0x177
[ 1.866073] [<ffffffff8101006a>] cpu_idle+0x7e/0x80
[ 1.866073] [<ffffffff81492074>] cpu_bringup_and_idle+0xe/0x10
[ 1.866073] ---[ end trace 4eaa2a86a8e2da22 ]---
[ 1.866073] BUG: unable to handle kernel paging request at ffffffffffffff60
[ 1.866073] IP: [<ffffffff814994a1>] thread_return+0x3b/0xe1
[ 1.866073] PGD 1003067 PUD 1004067 PMD 0
[ 1.866073] Thread overran stack, or stack corrupted
[ 1.866073] Oops: 0000 [#1] SMP
[ 1.866073] last sysfs file:
[ 1.866073] CPU 1
[ 1.866073] Modules linked in:
[ 1.866073] Pid: 617, comm: khelper Tainted: G W 2.6.28-rc6-tip #1
[ 1.866073] RIP: e030:[<ffffffff814994a1>] [<ffffffff814994a1>] thread_return+0x3b/0xe1
[ 1.866073] RSP: e02b:ffff8800ec029f68 EFLAGS: 00010002
[ 1.866073] RAX: ffff8800ee6b0ea0 RBX: ffffffff816d2020 RCX: 0000000000000004
[ 1.866073] RDX: 0000000000000000 RSI: ffff8800eca32be0 RDI: ffff88008131c000
[ 1.866073] RBP: 0000000000000000 R08: ffff8800ec028000 R09: 0000000100000000
[ 1.866073] R10: 0000000000000000 R11: 000000000000ca00 R12: 0000000000000000
[ 1.866073] R13: ffff880002bd8280 R14: 0000000000000000 R15: 0000000000000000
[ 1.866073] FS: 0000000000000000(0000) GS:ffff8800ee632880(0000) knlGS:0000000000000000
[ 1.866073] CS: e033 DS: 0000 ES: 0000 CR0: 000000008005003b
[ 1.866073] CR2: ffffffffffffff60 CR3: 0000000001001000 CR4: 0000000000002620
[ 1.866073] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
[ 1.866073] DR3: 0000000000000000 DR6: 00000000ffff0ff0 DR7: 0000000000000400
[ 1.866073] Process khelper (pid: 617, threadinfo ffff8800ec028000, task ffff8800eca32be0)
[ 1.866073] Stack:
[ 1.866073] 0000000000000000 0000000000000000 0000000000000000 0000000000000000
[ 1.866073] 0000000000000000 0000000000000000 0000000000000000 0000000000000000
[ 1.866073] 0000000000000000 0000000000000000 0000000000000000 0000000000000000
[ 1.866073] Call Trace:
[ 1.866073] Code: 65 4c 89 04 25 28 00 00 00 4c 8b 46 08 f0 41 0f ba 70 10 12 48 89 c7 0f 82 ed 7d b7 ff 48 89 ee 5d 9d 65 48 8b 3c 25 08 00 00 00 <48> 03 bd 60 ff ff ff 48 89 c6 e8 3b 47 ba ff 65 8b 04 25 24 00
[ 1.866073] RIP [<ffffffff814994a1>] thread_return+0x3b/0xe1
[ 1.866073] RSP <ffff8800ec029f68>
[ 1.866073] CR2: ffffffffffffff60
[ 1.866073] ---[ end trace 4eaa2a86a8e2da22 ]---
__ __ _____ _ _ _ _ _
\ \/ /___ _ __ |___ /| || | _ _ _ __ ___| |_ __ _| |__ | | ___
\ // _ \ '_ \ |_ \| || |_ __| | | | '_ \/ __| __/ _` | '_ \| |/ _ \
/ \ __/ | | | ___) |__ _|__| |_| | | | \__ \ || (_| | |_) | | __/
/_/\_\___|_| |_| |____(_) |_| \__,_|_| |_|___/\__\__,_|_.__/|_|\___|
(XEN) Xen version 3.4-unstable (deshantm@) (gcc version 4.2.4 (Ubuntu 4.2.4-3ubuntu4)) Wed Nov 26 16:27:34 EST 2008
(XEN) Latest ChangeSet: Wed Nov 19 19:13:22 2008 +0000 18796:98d48f7680db
(XEN) Command line: loglvl=all guest_loglvl=all com1=115200,8n1 console=com1 nousb
(XEN) Video information:
(XEN) VGA is text mode 80x25, font 8x16
(XEN) VBE/DDC methods: V2; EDID transfer time: 1 seconds
(XEN) Disc information:
(XEN) Found 2 MBR signatures
(XEN) Found 2 EDD information structures
(XEN) Xen-e820 RAM map:
(XEN) 0000000000000000 - 000000000009fc00 (usable)
(XEN) 00000000000f0000 - 0000000000100000 (reserved)
(XEN) 0000000000100000 - 00000000cfdffc00 (usable)
(XEN) 00000000cfdffc00 - 00000000cfe01c00 (ACPI NVS)
(XEN) 00000000cfe03c00 - 00000000cfe53c00 (reserved)
(XEN) 00000000cfe53c00 - 00000000cfe55c00 (ACPI data)
(XEN) 00000000cfe55c00 - 00000000d0000000 (reserved)
(XEN) 00000000e0000000 - 00000000f0000000 (reserved)
(XEN) 00000000fec00000 - 00000000fed00400 (reserved)
(XEN) 00000000fed20000 - 00000000feda0000 (reserved)
(XEN) 00000000fee00000 - 00000000fef00000 (reserved)
(XEN) 00000000ffb00000 - 0000000100000000 (reserved)
(XEN) 0000000100000000 - 000000012c000000 (usable)
(XEN) System RAM: 4029MB (4126328kB)
(XEN) ACPI: RSDP 000FEBF0, 0024 (r2 DELL )
(XEN) ACPI: XSDT 000FCE97, 0084 (r1 DELL B8K 15 ASL 61)
(XEN) ACPI: FACP 000FCFBF, 00F4 (r3 DELL B8K 15 ASL 61)
(XEN) ACPI: DSDT FFF68960, 475F (r1 DELL dt_ex 1000 INTL 20050624)
(XEN) ACPI: FACS CFDFFC00, 0040
(XEN) ACPI: SSDT FFF6D397, 009A (r1 DELL st_ex 1000 INTL 20050624)
(XEN) ACPI: APIC 000FD0B3, 0092 (r1 DELL B8K 15 ASL 61)
(XEN) ACPI: BOOT 000FD145, 0028 (r1 DELL B8K 15 ASL 61)
(XEN) ACPI: ASF! 000FD16D, 0092 (r32 DELL B8K 15 ASL 61)
(XEN) ACPI: MCFG 000FD1FF, 003E (r1 DELL B8K 15 ASL 61)
(XEN) ACPI: HPET 000FD23D, 0038 (r1 DELL B8K 15 ASL 61)
(XEN) ACPI: TCPA 000FD499, 0032 (r1 DELL B8K 15 ASL 61)
(XEN) ACPI: SLIC 000FD275, 0176 (r1 DELL B8K 15 ASL 61)
(XEN) ACPI: SSDT CFDFFC40, 01F9 (r1 DpgPmm Cpu0Ist 11 INTL 20050624)
(XEN) ACPI: SSDT CFE00049, 01F9 (r1 DpgPmm Cpu1Ist 11 INTL 20050624)
(XEN) ACPI: SSDT CFE00452, 0140 (r1 DpgPmm CpuPm 10 INTL 20050624)
(XEN) NUMA turned off
(XEN) Faking a node at 0000000000000000-000000012c000000
(XEN) Xen heap: 14MB (14612kB)
(XEN) Domain heap initialised
(XEN) found SMP MP-table at 000fe710
(XEN) DMI 2.3 present.
(XEN) Using APIC driver default
(XEN) ACPI: PM-Timer IO Port: 0x808
(XEN) ACPI: ACPI SLEEP INFO: pm1x_cnt[804,0], pm1x_evt[800,0]
(XEN) ACPI: wakeup_vec[cfdffc0c], vec_size[20]
(XEN) ACPI: Local APIC address 0xfee00000
(XEN) ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
(XEN) Processor #0 6:15 APIC version 20
(XEN) ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled)
(XEN) Processor #1 6:15 APIC version 20
(XEN) ACPI: LAPIC (acpi_id[0x03] lapic_id[0x05] disabled)
(XEN) ACPI: LAPIC (acpi_id[0x04] lapic_id[0x07] disabled)
(XEN) ACPI: LAPIC (acpi_id[0x05] lapic_id[0x00] disabled)
(XEN) ACPI: LAPIC (acpi_id[0x06] lapic_id[0x01] disabled)
(XEN) ACPI: LAPIC (acpi_id[0x07] lapic_id[0x02] disabled)
(XEN) ACPI: LAPIC (acpi_id[0x08] lapic_id[0x03] disabled)
(XEN) ACPI: LAPIC_NMI (acpi_id[0xff] high level lint[0x1])
(XEN) ACPI: IOAPIC (id[0x08] address[0xfec00000] gsi_base[0])
(XEN) IOAPIC[0]: apic_id 8, version 32, address 0xfec00000, GSI 0-23
(XEN) ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
(XEN) ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
(XEN) ACPI: IRQ0 used by override.
(XEN) ACPI: IRQ2 used by override.
(XEN) ACPI: IRQ9 used by override.
(XEN) Enabling APIC mode: Flat. Using 1 I/O APICs
(XEN) ACPI: HPET id: 0x8086a201 base: 0xfed00000
(XEN) Using ACPI (MADT) for SMP configuration information
(XEN) Using scheduler: SMP Credit Scheduler (credit)
(XEN) Initializing CPU#0
(XEN) Detected 2394.073 MHz processor.
(XEN) CPU: L1 I cache: 32K, L1 D cache: 32K
(XEN) CPU: L2 cache: 4096K
(XEN) CPU: Physical Processor ID: 0
(XEN) CPU: Processor Core ID: 0
(XEN) HVM: VMX enabled
(XEN) CPU0: Intel(R) Core(TM)2 CPU 6600 @ 2.40GHz stepping 06
(XEN) Booting processor 1/1 eip 8c000
(XEN) Initializing CPU#1
(XEN) CPU: L1 I cache: 32K, L1 D cache: 32K
(XEN) CPU: L2 cache: 4096K
(XEN) CPU: Physical Processor ID: 0
(XEN) CPU: Processor Core ID: 1
(XEN) CPU1: Intel(R) Core(TM)2 CPU 6600 @ 2.40GHz stepping 06
(XEN) Total of 2 processors activated.
(XEN) ENABLING IO-APIC IRQs
(XEN) -> Using new ACK method
(XEN) ..TIMER: vector=0xF0 apic1=0 pin1=2 apic2=-1 pin2=-1
(XEN) checking TSC synchronization across 2 CPUs: passed.
(XEN) Platform timer is 14.318MHz HPET
(XEN) Brought up 2 CPUs
(XEN) I/O virtualisation disabled
(XEN) ACPI sleep modes: S3
(XEN) MCA: Machine check polling timer started.
(XEN) *** LOADING DOMAIN 0 ***
(XEN) Xen kernel: 64-bit, lsb, compat32
(XEN) Dom0 kernel: 64-bit, PAE, lsb, paddr 0x1000000 -> 0x19d72ec
(XEN) PHYSICAL MEMORY ARRANGEMENT:
(XEN) Dom0 alloc.: 0000000124000000->0000000128000000 (962060 pages to be allocated)
(XEN) VIRTUAL MEMORY ARRANGEMENT:
(XEN) Loaded kernel: ffffffff81000000->ffffffff819d72ec
(XEN) Init. ramdisk: ffffffff819d8000->ffffffff82408600
(XEN) Phys-Mach map: ffffffff82409000->ffffffff82b80060
(XEN) Start info: ffffffff82b81000->ffffffff82b814a4
(XEN) Page tables: ffffffff82b82000->ffffffff82b9d000
(XEN) Boot stack: ffffffff82b9d000->ffffffff82b9e000
(XEN) TOTAL: ffffffff80000000->ffffffff83000000
(XEN) ENTRY ADDRESS: ffffffff81826200
(XEN) Dom0 has maximum 2 VCPUs
(XEN) Scrubbing Free RAM: .done.
(XEN) Xen trace buffers: disabled
(XEN) Std. Loglevel: All
(XEN) Guest Loglevel: All
(XEN) *** Serial input -> DOM0 (type 'CTRL-a' three times to switch input to Xen)
(XEN) Freed 108kB init memory.
mapping kernel into physical memory
Xen: setup ISA identity maps
about to get started...
[ 0.000000] PAT disabled on Xen
[ 0.000000] Initializing cgroup subsys cpuset
[ 0.000000] Initializing cgroup subsys cpu
[ 0.000000] Linux version 2.6.28-rc6-tip (deshantm@xen-kvm) (gcc version 4.2.4 (Ubuntu 4.2.4-3ubuntu4)) #1 SMP Sat Nov 29 19:14:57 EST 2008
[ 0.000000] Command line: root=/dev/sda1 ro console=hvc0 earlyprintk=xen xencons=ttyS0,115200
[ 0.000000] KERNEL supported cpus:
[ 0.000000] Intel GenuineIntel
[ 0.000000] AMD AuthenticAMD
[ 0.000000] Centaur CentaurHauls
[ 0.000000] BIOS-provided physical RAM map:
[ 0.000000] Xen: 0000000000000000 - 00000000000a0000 (usable)
[ 0.000000] Xen: 00000000000a0000 - 0000000000100000 (reserved)
[ 0.000000] Xen: 0000000000100000 - 0000000002409000 (usable)
[ 0.000000] Xen: 0000000002409000 - 0000000002b82000 (reserved)
[ 0.000000] Xen: 0000000002b82000 - 00000000eee0c000 (usable)
[ 0.000000] console [xenboot0] enabled
[ 0.000000] DMI 2.3 present.
[ 0.000000] last_pfn = 0xeee0c max_arch_pfn = 0x3ffffffff
[ 0.000000] init_memory_mapping: 0000000000000000-00000000eee0c000
[ 0.000000] last_map_addr: eee0c000 end: eee0c000
[ 0.000000] RAMDISK: 019d8000 - 02408600
[ 0.000000] ACPI: RSDP 000FEBF0, 0024 (r2 DELL )
[ 0.000000] ACPI: XSDT 000FCE97, 0084 (r1 DELL B8K 15 ASL 61)
[ 0.000000] ACPI: FACP 000FCFBF, 00F4 (r3 DELL B8K 15 ASL 61)
[ 0.000000] ACPI: DSDT FFF68960, 475F (r1 DELL dt_ex 1000 INTL 20050624)
[ 0.000000] ACPI: FACS CFDFFC00, 0040
[ 0.000000] ACPI: SSDT FFF6D397, 009A (r1 DELL st_ex 1000 INTL 20050624)
[ 0.000000] ACPI: APIC 000FD0B3, 0092 (r1 DELL B8K 15 ASL 61)
[ 0.000000] ACPI: BOOT 000FD145, 0028 (r1 DELL B8K 15 ASL 61)
[ 0.000000] ACPI: ASF! 000FD16D, 0092 (r32 DELL B8K 15 ASL 61)
[ 0.000000] ACPI: MCFG 000FD1FF, 003E (r1 DELL B8K 15 ASL 61)
[ 0.000000] ACPI: HPET 000FD23D, 0038 (r1 DELL B8K 15 ASL 61)
[ 0.000000] ACPI: TCPA 000FD499, 0032 (r1 DELL B8K 15 ASL 61)
[ 0.000000] ACPI: SLIC 000FD275, 0176 (r1 DELL B8K 15 ASL 61)
[ 0.000000] ACPI: SSDT CFDFFC40, 01F9 (r1 DpgPmm Cpu0Ist 11 INTL 20050624)
[ 0.000000] ACPI: SSDT CFE00049, 01F9 (r1 DpgPmm Cpu1Ist 11 INTL 20050624)
[ 0.000000] ACPI: SSDT CFE00452, 0140 (r1 DpgPmm CpuPm 10 INTL 20050624)
[ 0.000000] No NUMA configuration found
[ 0.000000] Faking a node at 0000000000000000-00000000eee0c000
[ 0.000000] Bootmem setup node 0 0000000000000000-00000000eee0c000
[ 0.000000] NODE_DATA [0000000000001000 - 0000000000005fff]
[ 0.000000] bootmap [0000000000008000 - 0000000000025dc7] pages 1e
[ 0.000000] (6 early reservations) ==> bootmem [0000000000 - 00eee0c000]
[ 0.000000] #0 [0000000000 - 0000001000] BIOS data page ==> [0000000000 - 0000001000]
[ 0.000000] #1 [0000006000 - 0000008000] TRAMPOLINE ==> [0000006000 - 0000008000]
[ 0.000000] #2 [0002b82000 - 0002b9d000] XEN PAGETABLES ==> [0002b82000 - 0002b9d000]
[ 0.000000] #3 [0001000000 - 00019d72ec] TEXT DATA BSS ==> [0001000000 - 00019d72ec]
[ 0.000000] #4 [00019d8000 - 0002408600] RAMDISK ==> [00019d8000 - 0002408600]
[ 0.000000] #5 [0000100000 - 000085f000] PGTABLE ==> [0000100000 - 000085f000]
[ 0.000000] found SMP MP-table at [ffff8800000fe710] 000fe710
[ 0.000000] Zone PFN ranges:
[ 0.000000] DMA 0x00000000 -> 0x00001000
[ 0.000000] DMA32 0x00001000 -> 0x00100000
[ 0.000000] Normal 0x00100000 -> 0x00100000
[ 0.000000] Movable zone start PFN for each node
[ 0.000000] early_node_map[3] active PFN ranges
[ 0.000000] 0: 0x00000000 -> 0x000000a0
[ 0.000000] 0: 0x00000100 -> 0x00002409
[ 0.000000] 0: 0x00002b82 -> 0x000eee0c
[ 0.000000] ACPI: PM-Timer IO Port: 0x808
[ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x05] disabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x04] lapic_id[0x07] disabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x05] lapic_id[0x00] disabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x06] lapic_id[0x01] disabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x07] lapic_id[0x02] disabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x08] lapic_id[0x03] disabled)
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0xff] high level lint[0x1])
[ 0.000000] ACPI: IOAPIC (id[0x08] address[0xfec00000] gsi_base[0])
[ 0.000000] IOAPIC[0]: apic_id 8, version 0, address 0xfec00000, GSI 0-23
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[ 0.000000] ACPI: HPET id: 0x8086a201 base: 0xfed00000
[ 0.000000] Using ACPI (MADT) for SMP configuration information
[ 0.000000] SMP: Allowing 2 CPUs, 0 hotplug CPUs
(XEN) io_apic.c:2203:
(XEN) ioapic_guest_write: apic=0, pin=2, old_irq=0, new_irq=-1
(XEN) ioapic_guest_write: old_entry=000009f0, new_entry=00010900
(XEN) ioapic_guest_write: Attempt to remove IO-APIC pin of in-use IRQ!
(XEN) io_apic.c:2203:
(XEN) ioapic_guest_write: apic=0, pin=4, old_irq=4, new_irq=-1
(XEN) ioapic_guest_write: old_entry=000009f1, new_entry=00010900
(XEN) ioapic_guest_write: Attempt to remove IO-APIC pin of in-use IRQ!
[ 0.000000] PM: Registered nosave memory: 00000000000a0000 - 0000000000100000
[ 0.000000] PM: Registered nosave memory: 0000000002409000 - 0000000002b82000
[ 0.000000] Allocating PCI resources starting at f0000000 (gap: eee0c000:111f4000)
[ 0.000000] PERCPU: Allocating 65536 bytes of per cpu data
[ 0.000000] Built 1 zonelists in Node order, mobility grouping on. Total pages: 961165
[ 0.000000] Policy zone: DMA32
[ 0.000000] Kernel command line: root=/dev/sda1 ro console=hvc0 earlyprintk=xen xencons=ttyS0,115200
[ 0.000000] Initializing CPU#0
[ 0.000000] xen: allocated irq 9 for acpi 9
[ 0.000000] PID hash table entries: 4096 (order: 12, 32768 bytes)
[ 0.000000] Detected 2394.072 MHz processor.
[ 0.000999] Console: colour dummy device 80x25
[ 0.000999] console handover: boot [xenboot0] -> real [hvc0]
[ 0.000999] Checking aperture...
[ 0.000999] No AGP bridge found
[ 0.000999] PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
[ 0.000999] Placing software IO TLB between 0x1c0000 - 0x11df3c000
[ 0.000999] Memory: 3757400k/3913776k available (4742k kernel code, 8036k absent, 148340k reserved, 3080k data, 604k init)
[ 0.000999] SLUB: Genslabs=13, HWalign=64, Order=0-3, MinObjects=0, CPUs=2, Nodes=1
[ 0.000999] installing Xen timer for CPU 0
[ 0.000999] Calibrating delay loop (skipped), value calculated using timer frequency.. 4788.14 BogoMIPS (lpj=2394072)
[ 0.000999] Security Framework initialized
[ 0.000999] SELinux: Initializing.
[ 0.000999] Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes)
[ 0.003017] Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes)
[ 0.003999] Mount-cache hash table entries: 256
[ 0.004173] Initializing cgroup subsys ns
[ 0.004181] Initializing cgroup subsys cpuacct
[ 0.004219] CPU: L1 I cache: 32K, L1 D cache: 32K
[ 0.004223] CPU: L2 cache: 4096K
[ 0.004228] CPU 0/0x0 -> Node 0
[ 0.004232] CPU: Physical Processor ID: 0
[ 0.004234] CPU: Processor Core ID: 0
[ 0.004247] SMP alternatives: switching to UP code
[ 0.031924] ACPI: Core revision 20080926
[ 0.235962] cpu 0 spinlock event irq 17
[ 0.236086] installing Xen timer for CPU 1
[ 0.236096] cpu 1 spinlock event irq 23
[ 0.236122] SMP alternatives: switching to SMP code
[ 0.000009] Initializing CPU#1
[ 0.000053] CPU: L1 I cache: 32K, L1 D cache: 32K
[ 0.000055] CPU: L2 cache: 4096K
[ 0.000057] CPU 1/0x0 -> Node 0
[ 0.000059] CPU: Physical Processor ID: 0
[ 0.000060] CPU: Processor Core ID: 0
[ 0.272263] Brought up 2 CPUs
[ 0.272428] khelper used greatest stack depth: 6344 bytes left
[ 0.272610] net_namespace: 1344 bytes
[ 0.272616] Booting paravirtualized kernel on Xen
[ 0.272620] Xen version: 3.4-unstable (preserve-AD) (dom0)
[ 0.272795] Grant table initialized
[ 0.272825] Time: 2:35:01 Date: 12/02/08
[ 0.272857] NET: Registered protocol family 16
[ 0.273294] khelper used greatest stack depth: 5944 bytes left
[ 0.273294] ACPI FADT declares the system doesn't support PCIe ASPM, so disable it
[ 0.273294] ACPI: bus type pci registered
[ 0.273294] PCI: MCFG configuration 0: base e0000000 segment 0 buses 0 - 255
[ 0.273294] PCI: Not using MMCONFIG.
[ 0.273294] PCI: Using configuration type 1 for base access
[ 0.276977] khelper used greatest stack depth: 5936 bytes left
[ 0.332989] ACPI: BIOS _OSI(Linux) query ignored
[ 0.332994] ACPI: DMI System Vendor: Dell Inc.
[ 0.332998] ACPI: DMI Product Name: OptiPlex 745
[ 0.333002] ACPI: DMI Product Version:
[ 0.333004] ACPI: DMI Board Name: 0HR330
[ 0.333007] ACPI: DMI BIOS Vendor: Dell Inc.
[ 0.333011] ACPI: DMI BIOS Date: 12/06/2007
[ 0.333014] ACPI: Please send DMI info above to linux-acpi@vger.kernel.org
[ 0.333018] ACPI: If "acpi_osi=Linux" works better, please notify linux-acpi@vger.kernel.org
[ 0.352868] ACPI: Interpreter enabled
[ 0.352872] ACPI: (supports S0 S3 S4 S5)
[ 0.352892] ACPI: Using IOAPIC for interrupt routing
[ 0.352960] PCI: MCFG configuration 0: base e0000000 segment 0 buses 0 - 255
[ 0.416762] PCI: MCFG area at e0000000 reserved in ACPI motherboard resources
[ 0.416769] resource map sanity check conflict: 0xe0000000 0xefffffff 0x2b82000 0xeee0bfff System RAM
[ 0.416778] ------------[ cut here ]------------
[ 0.416782] WARNING: at arch/x86/mm/ioremap.c:226 __ioremap_caller+0xc7/0x28d()
[ 0.416787] Modules linked in:
[ 0.416791] Pid: 1, comm: swapper Not tainted 2.6.28-rc6-tip #1
[ 0.416796] Call Trace:
[ 0.416802] [<ffffffff81042d44>] warn_on_slowpath+0x58/0x75
[ 0.416808] [<ffffffff811e98b8>] ? acpi_ut_acquire_mutex+0x3e/0x92
[ 0.416814] [<ffffffff81043a34>] ? printk+0x67/0x69
[ 0.416819] [<ffffffff81048bae>] ? iomem_map_sanity_check+0x87/0xb9
[ 0.416824] [<ffffffff811e97a9>] ? acpi_ut_release_mutex+0x5d/0x61
[ 0.416829] [<ffffffff8102fb07>] __ioremap_caller+0xc7/0x28d
[ 0.416836] [<ffffffff818552f6>] ? pci_mmcfg_arch_init+0x90/0x11d
[ 0.416842] [<ffffffff810b49ce>] ? __kmalloc+0xaa/0xd1
[ 0.416847] [<ffffffff8102fda2>] ioremap_nocache+0x12/0x14
[ 0.416852] [<ffffffff818552f6>] pci_mmcfg_arch_init+0x90/0x11d
[ 0.416857] [<ffffffff81855de0>] __pci_mmcfg_init+0x267/0x298
[ 0.416863] [<ffffffff8184b93c>] ? acpi_init+0x0/0x239
[ 0.416867] [<ffffffff8184b93c>] ? acpi_init+0x0/0x239
[ 0.416872] [<ffffffff81855e1c>] pci_mmcfg_late_init+0xb/0xd
[ 0.416877] [<ffffffff8184bad8>] acpi_init+0x19c/0x239
[ 0.416882] [<ffffffff8184a212>] ? fbmem_init+0x0/0x91
[ 0.416887] [<ffffffff8100a056>] do_one_initcall+0x56/0x138
[ 0.416892] [<ffffffff81082989>] ? register_irq_proc+0xa1/0xbd
[ 0.416899] [<ffffffff810f0000>] ? load_elf_binary+0x1341/0x1805
[ 0.416905] [<ffffffff8182698e>] kernel_init+0x12c/0x180
[ 0.416911] [<ffffffff81012619>] child_rip+0xa/0x21
[ 0.416916] [<ffffffff81011f2d>] ? retint_restore_args+0x5/0x20
[ 0.416921] [<ffffffff8101260f>] ? child_rip+0x0/0x21
[ 0.416929] ---[ end trace 4eaa2a86a8e2da22 ]---
[ 0.416934] PCI: Cannot map mmconfig aperture for segment 0
[ 0.506951] ACPI: ACPI Dock Station Driver: 1 docks/bays found
[ 0.506964] ACPI: PCI Root Bridge [PCI0] (0000:00)
[ 0.507108] pci 0000:00:01.0: PME# supported from D0 D3hot D3cold
[ 0.507116] pci 0000:00:01.0: PME# disabled
[ 0.507457] pci 0000:00:1a.7: PME# supported from D0 D3hot D3cold
[ 0.507465] pci 0000:00:1a.7: PME# disabled
[ 0.507581] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
[ 0.507589] pci 0000:00:1b.0: PME# disabled
[ 0.507668] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
[ 0.507676] pci 0000:00:1c.0: PME# disabled
[ 0.507764] pci 0000:00:1c.4: PME# supported from D0 D3hot D3cold
[ 0.507772] pci 0000:00:1c.4: PME# disabled
[ 0.508215] pci 0000:00:1d.7: PME# supported from D0 D3hot D3cold
[ 0.508223] pci 0000:00:1d.7: PME# disabled
[ 0.508408] pci 0000:00:1f.0: quirk: region 0800-087f claimed by ICH6 ACPI/GPIO/TCO
[ 0.508415] pci 0000:00:1f.0: quirk: region 0880-08bf claimed by ICH6 GPIO
[ 0.508542] pci 0000:00:1f.2: PME# supported from D3hot
[ 0.508549] pci 0000:00:1f.2: PME# disabled
[ 0.508745] pci 0000:00:1f.5: PME# supported from D3hot
[ 0.508752] pci 0000:00:1f.5: PME# disabled
[ 0.509252] pci 0000:03:00.0: PME# supported from D3hot D3cold
[ 0.509260] pci 0000:03:00.0: PME# disabled
[ 0.509498] pci 0000:04:02.0: PME# supported from D1 D2 D3hot D3cold
[ 0.509506] pci 0000:04:02.0: PME# disabled
[ 0.509576] pci 0000:00:1e.0: transparent bridge
[ 1.400609] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 9 10 *11 12 15)
[ 1.401780] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 9 *10 11 12 15)
[ 1.402546] ACPI: PCI Interrupt Link [LNKC] (IRQs *3 4 5 6 7 9 10 11 12 15)
[ 1.403284] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 9 10 11 12 15) *0, disabled.
[ 1.404064] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 *9 10 11 12 15)
[ 1.404875] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 9 10 11 12 15) *0, disabled.
[ 1.405613] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 7 *9 10 11 12 15)
[ 1.406383] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 *5 6 7 9 10 11 12 15)
[ 1.406601] ACPI Warning (tbutils-0217): Incorrect checksum in table [TCPA] - 00, should be 88 [20080926]
[ 1.406601] xen_balloon: Initialising balloon driver.
[ 1.407036] SCSI subsystem initialized
[ 1.407047] usbcore: registered new interface driver usbfs
[ 1.407047] usbcore: registered new interface driver hub
[ 1.407980] usbcore: registered new device driver usb
[ 1.407997] PCI: Using ACPI for IRQ routing
[ 1.407997] pci 0000:00:01.0: BAR 9: can't allocate resource
[ 1.408017] pci 0000:01:00.0: BAR 0: can't allocate resource
[ 1.415003] cfg80211: Using static regulatory domain info
[ 1.415003] cfg80211: Regulatory domain: US
[ 1.415003] (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
[ 1.415003] (2402000 KHz - 2472000 KHz @ 40000 KHz), (600 mBi, 2700 mBm)
[ 1.415003] (5170000 KHz - 5190000 KHz @ 40000 KHz), (600 mBi, 2300 mBm)
[ 1.415003] (5190000 KHz - 5210000 KHz @ 40000 KHz), (600 mBi, 2300 mBm)
[ 1.415003] (5210000 KHz - 5230000 KHz @ 40000 KHz), (600 mBi, 2300 mBm)
[ 1.415003] (5230000 KHz - 5330000 KHz @ 40000 KHz), (600 mBi, 2300 mBm)
[ 1.415003] (5735000 KHz - 5835000 KHz @ 40000 KHz), (600 mBi, 3000 mBm)
[ 1.415003] cfg80211: Calling CRDA for country: US
[ 1.415011] NetLabel: Initializing
[ 1.415011] NetLabel: domain hash size = 128
[ 1.415011] NetLabel: protocols = UNLABELED CIPSOv4
[ 1.415011] NetLabel: unlabeled traffic allowed by default
[ 1.415011] Xen: Initializing Xen DMA ops
[ 1.415011] Xen: Enabling DMA fallback to swiotlb
[ 1.415011] PCI-GART: No AMD GART found.
[ 1.417156] pnp: PnP ACPI init
[ 1.417172] ACPI: bus type pnp registered
[ 1.430356] pnp 00:01: io resource (0x800-0x85f) overlaps 0000:00:1f.0 BAR 7 (0x800-0x87f), disabling
[ 1.430363] pnp 00:01: io resource (0x860-0x8ff) overlaps 0000:00:1f.0 BAR 7 (0x800-0x87f), disabling
[ 1.430620] system 00:01: ioport range 0xc00-0xc7f has been reserved
[ 1.431264] xen_set_ioapic_routing: irq 13 gsi 13 vector 112 ioapic 0 pin 13 triggering 1 polarity 0
[ 1.431861] xen_set_ioapic_routing: irq 8 gsi 8 vector 72 ioapic 0 pin 8 triggering 1 polarity 0
[ 1.448974] xen_set_ioapic_routing: irq 4 gsi 4 vector 241 ioapic 0 pin 4 triggering 1 polarity 0
(XEN) io_apic.c:2216:
(XEN) ioapic_guest_write: apic=0, pin=4, old_irq=4, new_irq=4
(XEN) ioapic_guest_write: old_entry=000009f1, new_entry=000189f1
(XEN) ioapic_guest_write: Attempt to modify IO-APIC pin for in-use IRQ!
[ 1.472768] pnp 00:07: mem resource (0x0-0x9ffff) overlaps 0000:01:00.0 BAR 0 (0x0-0xfffffff), disabling
[ 1.472775] pnp 00:07: mem resource (0x100000-0xffffff) overlaps 0000:01:00.0 BAR 0 (0x0-0xfffffff), disabling
[ 1.472781] pnp 00:07: mem resource (0x1000000-0xcfdffbff) overlaps 0000:01:00.0 BAR 0 (0x0-0xfffffff), disabling
[ 1.472788] pnp 00:07: mem resource (0xf0000-0xfffff) overlaps 0000:01:00.0 BAR 0 (0x0-0xfffffff), disabling
[ 1.472794] pnp 00:07: mem resource (0xc0000-0xcffff) overlaps 0000:01:00.0 BAR 0 (0x0-0xfffffff), disabling
[ 1.472976] system 00:07: iomem range 0xfec00000-0xfecfffff has been reserved
[ 1.472981] system 00:07: iomem range 0xfee00000-0xfeefffff has been reserved
[ 1.472986] system 00:07: iomem range 0xffb00000-0xffbfffff has been reserved
[ 1.472991] system 00:07: iomem range 0xffc00000-0xffffffff has been reserved
[ 1.477357] system 00:08: ioport range 0x100-0x1fe has been reserved
[ 1.477363] system 00:08: ioport range 0x200-0x277 has been reserved
[ 1.477367] system 00:08: ioport range 0x280-0x2e7 has been reserved
[ 1.477372] system 00:08: ioport range 0x2f0-0x2f7 has been reserved
[ 1.477376] system 00:08: ioport range 0x300-0x377 has been reserved
[ 1.477381] system 00:08: ioport range 0x380-0x3bb has been reserved
[ 1.477385] system 00:08: ioport range 0x3c0-0x3e7 has been reserved
[ 1.477390] system 00:08: ioport range 0x3f6-0x3f7 has been reserved
[ 1.477394] system 00:08: ioport range 0x400-0x4cf has been reserved
[ 1.477399] system 00:08: ioport range 0x4d2-0x57f has been reserved
[ 1.477404] system 00:08: ioport range 0x580-0x677 has been reserved
[ 1.477408] system 00:08: ioport range 0x680-0x777 has been reserved
[ 1.477413] system 00:08: ioport range 0x780-0x7bb has been reserved
[ 1.477417] system 00:08: ioport range 0x7c0-0x7ff has been reserved
[ 1.477422] system 00:08: ioport range 0x8e0-0x8ff has been reserved
[ 1.477426] system 00:08: ioport range 0x900-0x9fe has been reserved
[ 1.477431] system 00:08: ioport range 0xa00-0xafe has been reserved
[ 1.477436] system 00:08: ioport range 0xb00-0xbfe has been reserved
[ 1.477440] system 00:08: ioport range 0xc80-0xcaf has been reserved
[ 1.477445] system 00:08: ioport range 0xcc0-0xcf7 has been reserved
[ 1.477449] system 00:08: ioport range 0xd00-0xdfe has been reserved
[ 1.477454] system 00:08: ioport range 0xe00-0xefe has been reserved
[ 1.477459] system 00:08: ioport range 0xf00-0xffe has been reserved
[ 1.477463] system 00:08: ioport range 0x2000-0x20fe has been reserved
[ 1.477468] system 00:08: ioport range 0x2100-0x21fe has been reserved
[ 1.477473] system 00:08: ioport range 0x2200-0x22fe has been reserved
[ 1.477477] system 00:08: ioport range 0x2300-0x23fe has been reserved
[ 1.477482] system 00:08: ioport range 0x2400-0x24fe has been reserved
[ 1.477487] system 00:08: ioport range 0x2500-0x25fe has been reserved
[ 1.477491] system 00:08: ioport range 0x2600-0x26fe has been reserved
[ 1.477496] system 00:08: ioport range 0x2700-0x27fe has been reserved
[ 1.477501] system 00:08: ioport range 0x2800-0x28fe has been reserved
[ 1.477505] system 00:08: ioport range 0x2900-0x29fe has been reserved
[ 1.477510] system 00:08: ioport range 0x2a00-0x2afe has been reserved
[ 1.477515] system 00:08: ioport range 0x2b00-0x2bfe has been reserved
[ 1.477520] system 00:08: ioport range 0x2c00-0x2cfe has been reserved
[ 1.477524] system 00:08: ioport range 0x2d00-0x2dfe has been reserved
[ 1.477531] system 00:08: ioport range 0x2e00-0x2efe has been reserved
[ 1.477535] system 00:08: ioport range 0x2f00-0x2ffe has been reserved
[ 1.477540] system 00:08: ioport range 0x5000-0x50fe has been reserved
[ 1.477545] system 00:08: ioport range 0x5100-0x51fe has been reserved
[ 1.477549] system 00:08: ioport range 0x5200-0x52fe has been reserved
[ 1.477554] system 00:08: ioport range 0x5300-0x53fe has been reserved
[ 1.477559] system 00:08: ioport range 0x5400-0x54fe has been reserved
[ 1.477564] system 00:08: ioport range 0x5500-0x55fe has been reserved
[ 1.477568] system 00:08: ioport range 0x5600-0x56fe has been reserved
[ 1.477573] system 00:08: ioport range 0x5700-0x57fe has been reserved
[ 1.477578] system 00:08: ioport range 0x5800-0x58fe has been reserved
[ 1.477582] system 00:08: ioport range 0x5900-0x59fe has been reserved
[ 1.477587] system 00:08: ioport range 0x5a00-0x5afe has been reserved
[ 1.477592] system 00:08: ioport range 0x5b00-0x5bfe has been reserved
[ 1.477597] system 00:08: ioport range 0x5c00-0x5cfe has been reserved
[ 1.477601] system 00:08: ioport range 0x5d00-0x5dfe has been reserved
[ 1.477606] system 00:08: ioport range 0x5e00-0x5efe has been reserved
[ 1.477611] system 00:08: ioport range 0x5f00-0x5ffe has been reserved
[ 1.477616] system 00:08: ioport range 0x6000-0x60fe has been reserved
[ 1.477620] system 00:08: ioport range 0x6100-0x61fe has been reserved
[ 1.477625] system 00:08: ioport range 0x6200-0x62fe has been reserved
[ 1.477630] system 00:08: ioport range 0x6300-0x63fe has been reserved
[ 1.477635] system 00:08: ioport range 0x6400-0x64fe has been reserved
[ 1.477639] system 00:08: ioport range 0x6500-0x65fe has been reserved
[ 1.477644] system 00:08: ioport range 0x6600-0x66fe has been reserved
[ 1.477649] system 00:08: ioport range 0x6700-0x67fe has been reserved
[ 1.477654] system 00:08: ioport range 0x6800-0x68fe has been reserved
[ 1.477659] system 00:08: ioport range 0x6900-0x69fe has been reserved
[ 1.477664] system 00:08: ioport range 0x6a00-0x6afe has been reserved
[ 1.478616] system 00:08: ioport range 0x6b00-0x6bfe has been reserved
[ 1.485539] system 00:08: ioport range 0x6c00-0x6cfe has been reserved
[ 1.491077] system 00:08: ioport range 0x6d00-0x6dfe has been reserved
[ 1.498002] system 00:08: ioport range 0x6e00-0x6efe has been reserved
[ 1.504926] system 00:08: ioport range 0x6f00-0x6ffe has been reserved
[ 1.511849] system 00:08: ioport range 0xa000-0xa0fe has been reserved
[ 1.517386] system 00:08: ioport range 0xa100-0xa1fe has been reserved
[ 1.524311] system 00:08: ioport range 0xa200-0xa2fe has been reserved
[ 1.531233] system 00:08: ioport range 0xa300-0xa3fe has been reserved
[ 1.538156] system 00:08: ioport range 0xa400-0xa4fe has been reserved
[ 1.543696] system 00:08: ioport range 0xa500-0xa5fe has been reserved
[ 1.550619] system 00:08: ioport range 0xa600-0xa6fe has been reserved
[ 1.557543] system 00:08: ioport range 0xa700-0xa7fe has been reserved
[ 1.564466] system 00:08: ioport range 0xa800-0xa8fe has been reserved
[ 1.570006] system 00:08: ioport range 0xa900-0xa9fe has been reserved
[ 1.576929] system 00:08: ioport range 0xaa00-0xaafe has been reserved
[ 1.583853] system 00:08: ioport range 0xab00-0xabfe has been reserved
[ 1.590776] system 00:08: ioport range 0xac00-0xacfe has been reserved
[ 1.596316] system 00:08: ioport range 0xad00-0xadfe has been reserved
[ 1.603239] system 00:08: ioport range 0xae00-0xaefe has been reserved
[ 1.610161] system 00:08: ioport range 0xaf00-0xaffe has been reserved
[ 1.617086] system 00:08: iomem range 0xe0000000-0xefffffff could not be reserved
[ 1.624008] system 00:08: iomem range 0xfeda0000-0xfedacfff has been reserved
[ 1.632610] pnp: PnP ACPI: found 10 devices
[ 1.635086] ACPI: ACPI bus type pnp unregistered
[ 1.646113] pci 0000:00:01.0: PCI bridge, secondary bus 0000:01
[ 1.647549] pci 0000:00:01.0: IO window: 0xd000-0xdfff
[ 1.651706] pci 0000:00:01.0: MEM window: 0xfe900000-0xfeafffff
[ 1.658628] pci 0000:00:01.0: PREFETCH window: 0x00000100000000-0x0000010fffffff
[ 1.665555] pci 0000:00:1c.0: PCI bridge, secondary bus 0000:02
[ 1.672471] pci 0000:00:1c.0: IO window: disabled
[ 1.676634] pci 0000:00:1c.0: MEM window: 0xfe800000-0xfe8fffff
[ 1.683553] pci 0000:00:1c.0: PREFETCH window: disabled
[ 1.687711] pci 0000:00:1c.4: PCI bridge, secondary bus 0000:03
[ 1.694626] pci 0000:00:1c.4: IO window: disabled
[ 1.698787] pci 0000:00:1c.4: MEM window: 0xfe700000-0xfe7fffff
[ 1.705708] pci 0000:00:1c.4: PREFETCH window: disabled
[ 1.709917] pci 0000:00:1e.0: PCI bridge, secondary bus 0000:04
[ 1.716784] pci 0000:00:1e.0: IO window: 0xc000-0xcfff
[ 1.720942] pci 0000:00:1e.0: MEM window: 0xfe500000-0xfe6fffff
[ 1.727865] pci 0000:00:1e.0: PREFETCH window: 0x000000f0000000-0x000000f00fffff
[ 1.736194] xen_set_ioapic_routing: irq 29 gsi 16 vector 144 ioapic 0 pin 16 triggering 0 polarity 1
[ 1.744480] pci 0000:00:01.0: PCI INT A -> GSI 16 (level, low) -> IRQ 29
[ 1.751401] xen: PCI device 0000:00:01.0 pin 1 -> irq 29
[ 1.756956] xen_allocate_pirq: returning irq 29 for gsi 16
[ 1.762481] xen_set_ioapic_routing: irq 29 gsi 16 vector 144 ioapic 0 pin 16 triggering 0 polarity 1
[ 1.772173] pci 0000:00:1c.0: PCI INT A -> GSI 16 (level, low) -> IRQ 29
[ 1.777709] xen: PCI device 0000:00:1c.0 pin 1 -> irq 29
[ 1.783266] xen_allocate_pirq: returning irq 29 for gsi 16
[ 1.788788] xen_set_ioapic_routing: irq 29 gsi 16 vector 144 ioapic 0 pin 16 triggering 0 polarity 1
[ 1.798483] pci 0000:00:1c.4: PCI INT A -> GSI 16 (level, low) -> IRQ 29
[ 1.805404] xen: PCI device 0000:00:1c.4 pin 1 -> irq 29
[ 1.810962] bus: 00 index 0 io port: [0x00-0xffff]
[ 1.815097] bus: 00 index 1 mmio: [0x000000-0xffffffffffffffff]
[ 1.822020] bus: 01 index 0 io port: [0xd000-0xdfff]
[ 1.826173] bus: 01 index 1 mmio: [0xfe900000-0xfeafffff]
[ 1.831713] bus: 01 index 2 mmio: [0x100000000-0x10fffffff]
[ 1.837250] bus: 01 index 3 mmio: [0x0-0x0]
[ 1.841406] bus: 02 index 0 mmio: [0x0-0x0]
[ 1.845560] bus: 02 index 1 mmio: [0xfe800000-0xfe8fffff]
[ 1.851098] bus: 02 index 2 mmio: [0x0-0x0]
[ 1.855253] bus: 02 index 3 mmio: [0x0-0x0]
[ 1.859405] bus: 03 index 0 mmio: [0x0-0x0]
[ 1.863560] bus: 03 index 1 mmio: [0xfe700000-0xfe7fffff]
[ 1.869100] bus: 03 index 2 mmio: [0x0-0x0]
[ 1.873253] bus: 03 index 3 mmio: [0x0-0x0]
[ 1.877408] bus: 04 index 0 io port: [0xc000-0xcfff]
[ 1.882946] bus: 04 index 1 mmio: [0xfe500000-0xfe6fffff]
[ 1.888485] bus: 04 index 2 mmio: [0xf0000000-0xf00fffff]
[ 1.894025] bus: 04 index 3 io port: [0x00-0xffff]
[ 1.899563] bus: 04 index 4 mmio: [0x000000-0xffffffffffffffff]
[ 1.905110] NET: Registered protocol family 2
[ 1.919329] IP route cache hash table entries: 131072 (order: 8, 1048576 bytes)
[ 1.921678] TCP established hash table entries: 524288 (order: 11, 8388608 bytes)
[ 1.928547] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
[ 1.930525] TCP: Hash tables configured (established 524288 bind 65536)
[ 1.936951] TCP reno registered
[ 1.944171] NET: Registered protocol family 1
[ 1.945376] checking if image is initramfs... it is
[ 1.962251] Freeing initrd memory: 10433k freed
[ 1.967514] Simple Boot Flag at 0x7a set to 0x1
(XEN) traps.c:2193:d0 Domain attempted WRMSR 000000000000008b from 000000c6:00000000 to 00000000:00000000.
(XEN) traps.c:2193:d0 Domain attempted WRMSR 000000000000008b from 000000c6:00000000 to 00000000:00000000.
[ 1.968926] Microcode Update Driver: v2.00 <tigran@aivazian.fsnet.co.uk>, Peter Oruba
[ 1.985767] audit: initializing netlink socket (disabled)
[ 1.990972] type=2000 audit(1228185304.130:1): initialized
[ 2.004159] HugeTLB registered 2 MB page size, pre-allocated 0 pages
[ 2.007522] VFS: Disk quotas dquot_6.5.1
[ 2.007664] Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[ 2.014331] msgmni has been set to 7664
[ 2.017901] alg: No test for stdrng (krng)
[ 2.021614] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252)
[ 2.029726] io scheduler noop registered
[ 2.032493] io scheduler anticipatory registered
[ 2.038031] io scheduler deadline registered
[ 2.043716] io scheduler cfq registered (default)
[ 2.116201] pcieport-driver 0000:00:01.0: found MSI capability
[ 2.116504] pcieport-driver 0000:00:1c.0: found MSI capability
[ 2.116800] pcieport-driver 0000:00:1c.4: found MSI capability
[ 2.117133] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[ 2.117422] input: Power Button (FF) as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input0
[ 2.117428] ACPI: Power Button (FF) [PWRF]
[ 2.117517] input: Power Button (CM) as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input1
[ 2.117523] ACPI: Power Button (CM) [VBTN]
[ 2.229495] Event-channel device installed.
[ 2.229499] ***blkif_init
[ 2.243511] hpet_acpi_add: no address or irqs in _CRS
[ 2.243631] Non-volatile memory driver v1.2
[ 2.243635] Linux agpgart interface v0.103
[ 2.243779] [drm] Initialized drm 1.1.0 20060810
[ 2.243842] Serial: 8250/16550 driver4 ports, IRQ sharing enabled
[ 2.246723] brd: module loaded
[ 2.247767] loop: module loaded
[ 2.247822] Intel(R) PRO/1000 Network Driver - version 7.3.20-k3-NAPI
[ 2.247827] Copyright (c) 1999-2006 Intel Corporation.
[ 2.247893] e100: Intel(R) PRO/100 Network Driver, 3.5.23-k6-NAPI
[ 2.247897] e100: Copyright(c) 1999-2006 Intel Corporation
[ 2.247971] tg3.c:v3.94 (August 14, 2008)
[ 2.247991] vendor=8086 device=2847
[ 2.247997] xen_allocate_pirq: returning irq 29 for gsi 16
[ 2.248002] xen_set_ioapic_routing: irq 29 gsi 16 vector 144 ioapic 0 pin 16 triggering 0 polarity 1
[ 2.248012] tg3 0000:03:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 29
[ 2.248017] xen: PCI device 0000:03:00.0 pin 1 -> irq 29
[ 2.257909] BUG: unable to handle kernel paging request at ffff8800ee724988
[ 2.257916] IP: [<ffff8800ee724988>] 0xffff8800ee724988
[ 2.257923] PGD 1002067 PUD 6e6067 PMD 85a067 PTE 80100000ee724067
[ 2.257930] Thread overran stack, or stack corrupted
[ 2.257933] Oops: 0011 [#1] SMP
[ 2.257937] last sysfs file:
[ 2.257940] CPU 0
[ 2.257943] Modules linked in:
[ 2.257947] Pid: 603, comm: khelper Tainted: G W 2.6.28-rc6-tip #1
[ 2.257952] RIP: e030:[<ffff8800ee724988>] [<ffff8800ee724988>] 0xffff8800ee724988
[ 2.257958] RSP: e02b:ffff8800ee724998 EFLAGS: 00050696
[ 2.258339] RAX: 0000000000000000 RBX: ffff8800ec7d2be0 RCX: 0000000000000004
[ 2.258899] RDX: ffff88008130c000 RSI: 0000000000000003 RDI: ffff8800ec016000
[ 2.258899] RBP: ffff8800ee724988 R08: ffff8800ec016000 R09: 0000000000000000
[ 2.258899] R10: 0000000000000000 R11: 000000000000e02b R12: ffffffff816ed810
[ 2.258899] R13: 0000000000000000 R14: 0000000100000000 R15: 0000000000000000
[ 2.258899] FS: 0000000000000000(0000) GS:ffffffff817f1a00(0000) knlGS:0000000000000000
[ 2.258899] CS: e033 DS: 0000 ES: 0000 CR0: 000000008005003b
[ 2.258899] CR2: ffff8800ee724988 CR3: 0000000001001000 CR4: 0000000000002620
[ 2.258899] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
[ 2.258899] DR3: 0000000000000000 DR6: 00000000ffff0ff0 DR7: 0000000000000400
[ 2.258899] Process khelper (pid: 603, threadinfo ffff8800ec016000, task ffff8800ee6b4920)
[ 2.258899] Stack:
[ 2.258899] 0000000000000000 ffff8800ee7249a0 ffff8800ee7249a0 ffff8800ec6c4300
[ 2.258899] ffff8800ee624580 ffff8800ee6b41d0 0000000000000001 0000000000000000
[ 2.258899] 0000000000000000 0000000000000000 0000000000000000 0000000000000000
[ 2.258899] Call Trace:
[ 2.258899] Code: 88 ff ff ff ff ff ff ff ff ff ff 88 49 72 ee 00 88 ff ff 30 e0 00 00 00 00 00 00 96 06 05 00 00 00 00 00 98 49 72 ee 00 88 ff ff <2b> e0 00 00 00 00 00 00 88 49 72 ee 00 88 ff ff 00 00 00 00 00
[ 2.258899] RIP [<ffff8800ee724988>] 0xffff8800ee724988
[ 2.258899] RSP <ffff8800ee724998>
[ 2.258899] CR2: ffff8800ee724988
[ 2.258899] ---[ end trace 4eaa2a86a8e2da22 ]---
[ 3.004105] BUG: unable to handle kernel paging request at 0000000000030021
[ 3.004114] IP: [<ffffffff81052d51>] wq_per_cpu+0x0/0x1f
[ 3.004127] PGD 0
[ 3.004131] Oops: 0000 [#2] SMP
[ 3.004136] last sysfs file:
[ 3.004140] CPU 1
[ 3.004144] Modules linked in:
[ 3.004150] Pid: 0, comm: swapper Tainted: G D W 2.6.28-rc6-tip #1
[ 3.004156] RIP: e030:[<ffffffff81052d51>] [<ffffffff81052d51>] wq_per_cpu+0x0/0x1f
[ 3.004166] RSP: e02b:ffff8800ee73be18 EFLAGS: 00010286
[ 3.004172] RAX: ffff8800ee724800 RBX: ffff880002bd46d0 RCX: dead000000200200
[ 3.004178] RDX: ffff88008131c000 RSI: 0000000000000001 RDI: 0000000000030001
[ 3.004185] RBP: ffff8800ee73be30 R08: ffff880002bd4728 R09: 0000000000000001
[ 3.004192] R10: ffffffff81053790 R11: 0000000000000040 R12: 0000000000000100
[ 3.004198] R13: ffffffff810537cf R14: ffff880002bd46d0 R15: ffff8800ee6d1c18
[ 3.004209] FS: 0000000000000000(0000) GS:ffff8800ee632d80(0000) knlGS:0000000000000000
[ 3.004216] CS: e033 DS: 002b ES: 002b CR0: 000000008005003b
[ 3.004222] CR2: 0000000000030021 CR3: 0000000001001000 CR4: 0000000000002620
[ 3.004230] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
[ 3.004237] DR3: 0000000000000000 DR6: 00000000ffff0ff0 DR7: 0000000000000400
[ 3.004244] Process swapper (pid: 0, threadinfo ffff8800ee6c8000, task ffff8800ee6b0ea0)
[ 3.004250] Stack:
[ 3.004253] ffffffff810537f3 ffff880002bd46d0 ffff8800ee6d0000 ffff8800ee73beb0
[ 3.004262] ffffffff8104be46 ffffffff8100ded1 ffff8800ee73be70 0000000000000000
[ 3.004273] ffff8800ee6d1818 ffff8800ee6d1418 ffff8800ee6d1018 ffff8800ee73be70
[ 3.004285] Call Trace:
[ 3.004289] <IRQ> <0> [<ffffffff810537f3>] ? delayed_work_timer_fn+0x24/0x34
[ 3.004309] [<ffffffff8104be46>] run_timer_softirq+0x17b/0x20b
[ 3.004315] [<ffffffff8100ded1>] ? xen_timer_interrupt+0x13f/0x14d
[ 3.004322] [<ffffffff81047ef6>] __do_softirq+0x7e/0x123
[ 3.004328] [<ffffffff8101271c>] call_softirq+0x1c/0x30
[ 3.004334] [<ffffffff81013b07>] do_softirq+0x44/0x8d
[ 3.004339] [<ffffffff81047dcb>] irq_exit+0x3f/0x8e
[ 3.004344] [<ffffffff81201c51>] xen_evtchn_do_upcall+0x130/0x148
[ 3.004352] [<ffffffff8101276e>] xen_do_hypervisor_callback+0x1e/0x30
[ 3.004358] <EOI> <0> [<ffffffff810093aa>] ? _stext+0x3aa/0x1000
[ 3.004364] [<ffffffff810093aa>] ? _stext+0x3aa/0x1000
[ 3.004369] [<ffffffff8100d9e5>] ? xen_safe_halt+0x10/0x1a
[ 3.004375] [<ffffffff8100bccf>] ? xen_idle+0x4f/0x64
[ 3.004380] [<ffffffff8101003d>] ? cpu_idle+0x51/0x80
[ 3.004385] [<ffffffff81492074>] ? cpu_bringup_and_idle+0xe/0x10
[ 3.004392] Code: 48 89 fe 53 48 89 fb 31 ff e8 5c ff ff ff 85 c0 75 04 0f 0b eb fe 48 8b 03 83 e0 03 48 83 c8 01 4c 09 e0 48 89 03 5b 41 5c c9 c3 <83> 7f 20 00 55 48 89 e5 74 06 8b 35 c7 f3 79 00 48 8b 07 48 63
[ 3.004438] RIP [<ffffffff81052d51>] wq_per_cpu+0x0/0x1f
[ 3.004444] RSP <ffff8800ee73be18>
[ 3.004446] CR2: 0000000000030021
[ 3.004450] ---[ end trace 4eaa2a86a8e2da22 ]---
[ 3.004453] Kernel panic - not syncing: Fatal exception in interrupt
[ 3.004458] Pid: 0, comm: swapper Tainted: G D W 2.6.28-rc6-tip #1
[ 3.004461] Call Trace:
[ 3.004463] <IRQ> [<ffffffff81042e01>] panic+0xa0/0x159
[ 3.004473] [<ffffffff8101410d>] ? show_registers+0x1f7/0x206
[ 3.004478] [<ffffffff8121c229>] ? do_unblank_screen+0x1d/0x119
[ 3.004484] [<ffffffff81042ac9>] ? print_oops_end_marker+0x1e/0x20
[ 3.004489] [<ffffffff8149bbc8>] oops_end+0xc7/0xd7
[ 3.004494] [<ffffffff8149d685>] do_page_fault+0x926/0x9e8
[ 3.004499] [<ffffffff810537cf>] ? delayed_work_timer_fn+0x0/0x34
[ 3.004504] [<ffffffff8149b0f5>] page_fault+0x25/0x30
[ 3.004509] [<ffffffff810537cf>] ? delayed_work_timer_fn+0x0/0x34
[ 3.004514] [<ffffffff81053790>] ? schedule_delayed_work_on+0x19/0x1b
[ 3.004519] [<ffffffff81052d51>] ? wq_per_cpu+0x0/0x1f
[ 3.004524] [<ffffffff810537f3>] ? delayed_work_timer_fn+0x24/0x34
[ 3.004529] [<ffffffff8104be46>] run_timer_softirq+0x17b/0x20b
[ 3.004535] [<ffffffff8100ded1>] ? xen_timer_interrupt+0x13f/0x14d
[ 3.004540] [<ffffffff81047ef6>] __do_softirq+0x7e/0x123
[ 3.004545] [<ffffffff8101271c>] call_softirq+0x1c/0x30
[ 3.004550] [<ffffffff81013b07>] do_softirq+0x44/0x8d
[ 3.004554] [<ffffffff81047dcb>] irq_exit+0x3f/0x8e
[ 3.004559] [<ffffffff81201c51>] xen_evtchn_do_upcall+0x130/0x148
[ 3.004564] [<ffffffff8101276e>] xen_do_hypervisor_callback+0x1e/0x30
[ 3.004568] <EOI> [<ffffffff810093aa>] ? _stext+0x3aa/0x1000
[ 3.004575] [<ffffffff810093aa>] ? _stext+0x3aa/0x1000
[ 3.004580] [<ffffffff8100d9e5>] ? xen_safe_halt+0x10/0x1a
[ 3.004584] [<ffffffff8100bccf>] ? xen_idle+0x4f/0x64
[ 3.004589] [<ffffffff8101003d>] ? cpu_idle+0x51/0x80
[ 3.004593] [<ffffffff81492074>] ? cpu_bringup_and_idle+0xe/0x10
[-- Attachment #4: Type: text/plain, Size: 138 bytes --]
_______________________________________________
Xen-devel mailing list
Xen-devel@lists.xensource.com
http://lists.xensource.com/xen-devel
^ permalink raw reply [flat|nested] 22+ messages in thread
* pv_ops dom0 testing
@ 2008-12-03 12:16 Andrew Lyon
2008-12-03 12:32 ` Boris Derzhavets
` (2 more replies)
0 siblings, 3 replies; 22+ messages in thread
From: Andrew Lyon @ 2008-12-03 12:16 UTC (permalink / raw)
To: Jeremy Fitzhardinge, xen-devel
Hi,
I downloaded a working tree of the current pv_ops dom0 kernel by
following the instructions at
http://wiki.xensource.com/xenwiki/XenParavirtOps , the kernel compiled
successfully but when I try to boot it on my Dell Optiplex 755 the
system locks up after Xen prints "(XEN) Xen is relinquishing VGA
console."
I found part of a thread on xen-devel with subject "pv_ops dom0
testing" which seems to suggest that adding "console=hvc0
earlyprintk=xen" to the kernel command line fixes a known problem, I
tried that but it did not make any difference.
Grub stanza:
title Xen 3.3 / Linux 2.6.28-rc6-tip pvops dom0
root (hd0,0)
kernel /xen.gz
module /kernel-2.6.28-rc6-tip root=/dev/sda2 console=hvc0 earlyprintk=xen
Perhaps it is too early to be testing dom0 pvops? or I need to apply
further patches to the source tree?
Andy
^ permalink raw reply [flat|nested] 22+ messages in thread
* Re: pv_ops dom0 testing
2008-12-03 12:16 Andrew Lyon
@ 2008-12-03 12:32 ` Boris Derzhavets
2008-12-03 15:08 ` Andrew Lyon
2008-12-03 15:37 ` Todd Deshane
2 siblings, 0 replies; 22+ messages in thread
From: Boris Derzhavets @ 2008-12-03 12:32 UTC (permalink / raw)
To: Jeremy Fitzhardinge, xen-devel, Andrew Lyon
[-- Attachment #1.1: Type: text/plain, Size: 1691 bytes --]
title Xen 3.3 / Linux 2.6.28-rc6-tip pvops dom0
root (hd0,0)
kernel /xen.gz ?
***********************************************************
I guess this line is not correct.
2.6.28 kernel itself should already suppport pv_ops
via config file options.
************************************************************
module /kernel-2.6.28-rc6-tip root=/dev/sda2 console=hvc0 earlyprintk=xen
--- On Wed, 12/3/08, Andrew Lyon <andrew.lyon@gmail.com> wrote:
From: Andrew Lyon <andrew.lyon@gmail.com>
Subject: [Xen-devel] pv_ops dom0 testing
To: "Jeremy Fitzhardinge" <jeremy@goop.org>, xen-devel@lists.xensource.com
Date: Wednesday, December 3, 2008, 7:16 AM
Hi,
I downloaded a working tree of the current pv_ops dom0 kernel by
following the instructions at
http://wiki.xensource.com/xenwiki/XenParavirtOps , the kernel compiled
successfully but when I try to boot it on my Dell Optiplex 755 the
system locks up after Xen prints "(XEN) Xen is relinquishing VGA
console."
I found part of a thread on xen-devel with subject "pv_ops dom0
testing" which seems to suggest that adding "console=hvc0
earlyprintk=xen" to the kernel command line fixes a known problem, I
tried that but it did not make any difference.
Grub stanza:
title Xen 3.3 / Linux 2.6.28-rc6-tip pvops dom0
root (hd0,0)
kernel /xen.gz
module /kernel-2.6.28-rc6-tip root=/dev/sda2 console=hvc0 earlyprintk=xen
Perhaps it is too early to be testing dom0 pvops? or I need to apply
further patches to the source tree?
Andy
_______________________________________________
Xen-devel mailing list
Xen-devel@lists.xensource.com
http://lists.xensource.com/xen-devel
[-- Attachment #1.2: Type: text/html, Size: 2054 bytes --]
[-- Attachment #2: Type: text/plain, Size: 138 bytes --]
_______________________________________________
Xen-devel mailing list
Xen-devel@lists.xensource.com
http://lists.xensource.com/xen-devel
^ permalink raw reply [flat|nested] 22+ messages in thread
* Re: pv_ops dom0 testing
2008-12-03 12:16 Andrew Lyon
2008-12-03 12:32 ` Boris Derzhavets
@ 2008-12-03 15:08 ` Andrew Lyon
2008-12-03 15:37 ` Todd Deshane
2 siblings, 0 replies; 22+ messages in thread
From: Andrew Lyon @ 2008-12-03 15:08 UTC (permalink / raw)
To: Jeremy Fitzhardinge, xen-devel
On Wed, Dec 3, 2008 at 12:16 PM, Andrew Lyon <andrew.lyon@gmail.com> wrote:
> Hi,
>
> I downloaded a working tree of the current pv_ops dom0 kernel by
> following the instructions at
> http://wiki.xensource.com/xenwiki/XenParavirtOps , the kernel compiled
> successfully but when I try to boot it on my Dell Optiplex 755 the
> system locks up after Xen prints "(XEN) Xen is relinquishing VGA
> console."
>
> I found part of a thread on xen-devel with subject "pv_ops dom0
> testing" which seems to suggest that adding "console=hvc0
> earlyprintk=xen" to the kernel command line fixes a known problem, I
> tried that but it did not make any difference.
>
> Grub stanza:
>
> title Xen 3.3 / Linux 2.6.28-rc6-tip pvops dom0
> root (hd0,0)
> kernel /xen.gz
> module /kernel-2.6.28-rc6-tip root=/dev/sda2 console=hvc0 earlyprintk=xen
>
> Perhaps it is too early to be testing dom0 pvops? or I need to apply
> further patches to the source tree?
>
> Andy
>
I tried booting the kernel on the bare metal (no xen) , it boots and
detects most of the hardware but locks up at:
request_module: runaway loop module binfmt-efde
request_module: runaway loop module binfmt-efde
request_module: runaway loop module binfmt-efde
request_module: runaway loop module binfmt-efde
request_module: runaway loop module binfmt-efde
Andy
^ permalink raw reply [flat|nested] 22+ messages in thread
* Re: pv_ops dom0 testing
2008-12-03 12:16 Andrew Lyon
2008-12-03 12:32 ` Boris Derzhavets
2008-12-03 15:08 ` Andrew Lyon
@ 2008-12-03 15:37 ` Todd Deshane
2008-12-03 16:36 ` Andrew Lyon
2 siblings, 1 reply; 22+ messages in thread
From: Todd Deshane @ 2008-12-03 15:37 UTC (permalink / raw)
To: Andrew Lyon; +Cc: Jeremy Fitzhardinge, xen-devel
[-- Attachment #1.1: Type: text/plain, Size: 691 bytes --]
On Wed, Dec 3, 2008 at 7:16 AM, Andrew Lyon <andrew.lyon@gmail.com> wrote:
> Hi,
>
> I downloaded a working tree of the current pv_ops dom0 kernel by
> following the instructions at
> http://wiki.xensource.com/xenwiki/XenParavirtOps , the kernel compiled
> successfully but when I try to boot it on my Dell Optiplex 755 the
> system locks up after Xen prints "(XEN) Xen is relinquishing VGA
> console."
>
I don't actually have the kernel boot showing on the screen either.
I have been using the serial debug output to minicom on another
machine.
A serial console is both useful for debugging and easy to setup.
Cheers,
Todd
--
Todd Deshane
http://todddeshane.net
http://runningxen.com
[-- Attachment #1.2: Type: text/html, Size: 1195 bytes --]
[-- Attachment #2: Type: text/plain, Size: 138 bytes --]
_______________________________________________
Xen-devel mailing list
Xen-devel@lists.xensource.com
http://lists.xensource.com/xen-devel
^ permalink raw reply [flat|nested] 22+ messages in thread
* Re: pv_ops dom0 testing
2008-12-03 15:37 ` Todd Deshane
@ 2008-12-03 16:36 ` Andrew Lyon
2008-12-03 16:43 ` Todd Deshane
0 siblings, 1 reply; 22+ messages in thread
From: Andrew Lyon @ 2008-12-03 16:36 UTC (permalink / raw)
To: deshantm; +Cc: Jeremy Fitzhardinge, xen-devel
On Wed, Dec 3, 2008 at 3:37 PM, Todd Deshane <deshantm@gmail.com> wrote:
>
>
> On Wed, Dec 3, 2008 at 7:16 AM, Andrew Lyon <andrew.lyon@gmail.com> wrote:
>>
>> Hi,
>>
>> I downloaded a working tree of the current pv_ops dom0 kernel by
>> following the instructions at
>> http://wiki.xensource.com/xenwiki/XenParavirtOps , the kernel compiled
>> successfully but when I try to boot it on my Dell Optiplex 755 the
>> system locks up after Xen prints "(XEN) Xen is relinquishing VGA
>> console."
>
> I don't actually have the kernel boot showing on the screen either.
> I have been using the serial debug output to minicom on another
> machine.
>
> A serial console is both useful for debugging and easy to setup.
>
> Cheers,
> Todd
>
> --
> Todd Deshane
> http://todddeshane.net
> http://runningxen.com
>
I had the system setup to output to serial and vga console
(console=vga,com1) but it seems that the vga console only displays Xen
debug messages, I hooked up a null modem cable and I've now captured
the full xen and linux dmesg, it appears that the onboard intel ahci
sata is not working so the kernel is unable to run init:
__ __ _____ _____ ___
\ \/ /___ _ __ |___ / |___ / / _ \
\ // _ \ '_ \ |_ \ |_ \| | | |
/ \ __/ | | | ___) | ___) | |_| |
/_/\_\___|_| |_| |____(_)____(_)___/
(XEN) Xen version 3.3.0 (root@(none)) (gcc version 4.1.2 (Gentoo 4.1.2
p1.0.2)) Tue Dec 2 15:55:55 GMT 2008
(XEN) Latest ChangeSet: unavailable
(XEN) Command line: com1=115200,8n1 console=vga,com1
(XEN) Video information:
(XEN) VGA is text mode 80x25, font 8x16
(XEN) VBE/DDC methods: V2; EDID transfer time: 1 seconds
(XEN) Disc information:
(XEN) Found 1 MBR signatures
(XEN) Found 1 EDD information structures
(XEN) Xen-e820 RAM map:
(XEN) 0000000000000000 - 000000000009ec00 (usable)
(XEN) 00000000000f0000 - 0000000000100000 (reserved)
(XEN) 0000000000100000 - 00000000cfdff800 (usable)
(XEN) 00000000cfdff800 - 00000000cfe53c00 (ACPI NVS)
(XEN) 00000000cfe53c00 - 00000000cfe55c00 (ACPI data)
(XEN) 00000000cfe55c00 - 00000000d0000000 (reserved)
(XEN) 00000000e0000000 - 00000000f0000000 (reserved)
(XEN) 00000000fec00000 - 00000000fed00400 (reserved)
(XEN) 00000000fed20000 - 00000000feda0000 (reserved)
(XEN) 00000000fee00000 - 00000000fef00000 (reserved)
(XEN) 00000000ffb00000 - 0000000100000000 (reserved)
(XEN) 0000000100000000 - 0000000128000000 (usable)
(XEN) System RAM: 3965MB (4060788kB)
(XEN) ACPI: RSDP 000FEC00, 0024 (r2 DELL )
(XEN) ACPI: XSDT 000FC5B3, 008C (r1 DELL B9K 15 ASL 61)
(XEN) ACPI: FACP 000FC6E3, 00F4 (r3 DELL B9K 15 ASL 61)
(XEN) ACPI: DSDT FFF76B39, 4596 (r1 DELL dt_ex 1000 INTL 20050624)
(XEN) ACPI: FACS CFDFF800, 0040
(XEN) ACPI: SSDT FFF7B1EE, 00AA (r1 DELL st_ex 1000 INTL 20050624)
(XEN) ACPI: APIC 000FC7D7, 0092 (r1 DELL B9K 15 ASL 61)
(XEN) ACPI: BOOT 000FC869, 0028 (r1 DELL B9K 15 ASL 61)
(XEN) ACPI: ASF! 000FC891, 0096 (r32 DELL B9K 15 ASL 61)
(XEN) ACPI: MCFG 000FC927, 003E (r1 DELL B9K 15 ASL 61)
(XEN) ACPI: HPET 000FC965, 0038 (r1 DELL B9K 15 ASL 61)
(XEN) ACPI: TCPA 000FCBC1, 0032 (r1 DELL B9K 15 ASL 61)
(XEN) ACPI: DMAR 000FCBF3, 00D0 (r1 DELL B9K 15 ASL 61)
(XEN) ACPI: SLIC 000FC99D, 0176 (r1 DELL B9K 15 ASL 61)
(XEN) ACPI: SSDT CFDFF840, 01F9 (r1 DpgPmm Cpu0Ist 11 INTL 20050624)
(XEN) ACPI: SSDT CFDFFC49, 01F9 (r1 DpgPmm Cpu1Ist 11 INTL 20050624)
(XEN) ACPI: SSDT CFE00052, 0140 (r1 DpgPmm CpuPm 10 INTL 20050624)
(XEN) Xen heap: 14MB (14632kB)
(XEN) Domain heap initialised
(XEN) Processor #0 6:15 APIC version 20
(XEN) Processor #1 6:15 APIC version 20
(XEN) IOAPIC[0]: apic_id 8, version 32, address 0xfec00000, GSI 0-23
(XEN) Enabling APIC mode: Flat. Using 1 I/O APICs
(XEN) Using scheduler: SMP Credit Scheduler (credit)
(XEN) Detected 2394.042 MHz processor.
(XEN) HVM: VMX enabled
(XEN) CPU0: Intel(R) Core(TM)2 CPU 6600 @ 2.40GHz stepping 06
(XEN) Booting processor 1/1 eip 8c000
(XEN) CPU1: Intel(R) Core(TM)2 CPU 6600 @ 2.40GHz stepping 06
(XEN) Total of 2 processors activated.
(XEN) ENABLING IO-APIC IRQs
(XEN) -> Using new ACK method
(XEN) checking TSC synchronization across 2 CPUs: passed.
(XEN) Platform timer is 14.318MHz HPET
(XEN) Brought up 2 CPUs
(XEN) I/O virtualisation disabled
(XEN) *** LOADING DOMAIN 0 ***
(XEN) Xen kernel: 64-bit, lsb, compat32
(XEN) Dom0 kernel: 64-bit, PAE, lsb, paddr 0x200000 -> 0x777e68
(XEN) PHYSICAL MEMORY ARRANGEMENT:
(XEN) Dom0 alloc.: 0000000123000000->0000000124000000 (958126 pages
to be allocated)
(XEN) VIRTUAL MEMORY ARRANGEMENT:
(XEN) Loaded kernel: ffffffff80200000->ffffffff80777e68
(XEN) Init. ramdisk: ffffffff80778000->ffffffff80778000
(XEN) Phys-Mach map: ffffffff80778000->ffffffff80ecf570
(XEN) Start info: ffffffff80ed0000->ffffffff80ed04a4
(XEN) Page tables: ffffffff80ed1000->ffffffff80edc000
(XEN) Boot stack: ffffffff80edc000->ffffffff80edd000
(XEN) TOTAL: ffffffff80000000->ffffffff81000000
(XEN) ENTRY ADDRESS: ffffffff8064f200
(XEN) Dom0 has maximum 2 VCPUs
(XEN) Scrubbing Free RAM: .done.
(XEN) Xen trace buffers: disabled
(XEN) Std. Loglevel: Errors and warnings
(XEN) Guest Loglevel: Nothing (Rate-limited: Errors and warnings)
(XEN) Xen is relinquishing VGA console.
(XEN) *** Serial input -> DOM0 (type 'CTRL-a' three times to switch
input to Xen)
(XEN) Freed 108kB init memory.
mapping kernel into physical memory
Xen: setup ISA identity maps
about to get started...
PAT disabled on Xen
Linux version 2.6.28-rc6-tip (root@optiplex755) (gcc version 4.1.2
(Gentoo 4.1.2 p1.0.2)) #2 SMP Wed Dec 3 15:24:08 GMT 2008
Command line: root=/dev/sda2 console=hvc0 earlyprintk=xen
KERNEL supported cpus:
Intel GenuineIntel
AMD AuthenticAMD
Centaur CentaurHauls
BIOS-provided physical RAM map:
Xen: 0000000000000000 - 00000000000a0000 (usable)
Xen: 00000000000a0000 - 0000000000100000 (reserved)
Xen: 0000000000100000 - 0000000000778000 (usable)
Xen: 0000000000778000 - 0000000000ed1000 (reserved)
Xen: 0000000000ed1000 - 00000000eaeae000 (usable)
console [xenboot0] enabled
DMI 2.5 present.
last_pfn = 0xeaeae max_arch_pfn = 0x3ffffffff
init_memory_mapping: 0000000000000000-00000000eaeae000
last_map_addr: eaeae000 end: eaeae000
ACPI: RSDP 000FEC00, 0024 (r2 DELL )
ACPI: XSDT 000FC5B3, 008C (r1 DELL B9K 15 ASL 61)
ACPI: FACP 000FC6E3, 00F4 (r3 DELL B9K 15 ASL 61)
ACPI: DSDT FFF76B39, 4596 (r1 DELL dt_ex 1000 INTL 20050624)
ACPI: FACS CFDFF800, 0040
ACPI: SSDT FFF7B1EE, 00AA (r1 DELL st_ex 1000 INTL 20050624)
ACPI: APIC 000FC7D7, 0092 (r1 DELL B9K 15 ASL 61)
ACPI: BOOT 000FC869, 0028 (r1 DELL B9K 15 ASL 61)
ACPI: ASF! 000FC891, 0096 (r32 DELL B9K 15 ASL 61)
ACPI: MCFG 000FC927, 003E (r1 DELL B9K 15 ASL 61)
ACPI: HPET 000FC965, 0038 (r1 DELL B9K 15 ASL 61)
ACPI: TCPA 000FCBC1, 0032 (r1 DELL B9K 15 ASL 61)
ACPI: DMAR 000FCBF3, 00D0 (r1 DELL B9K 15 ASL 61)
ACPI: SLIC 000FC99D, 0176 (r1 DELL B9K 15 ASL 61)
ACPI: SSDT CFDFF840, 01F9 (r1 DpgPmm Cpu0Ist 11 INTL 20050624)
ACPI: SSDT CFDFFC49, 01F9 (r1 DpgPmm Cpu1Ist 11 INTL 20050624)
ACPI: SSDT CFE00052, 0140 (r1 DpgPmm CpuPm 10 INTL 20050624)
ACPI: DMI detected: Dell OptiPlex 755
(5 early reservations) ==> bootmem [0000000000 - 00eaeae000]
#0 [0000000000 - 0000001000] BIOS data page ==> [0000000000 - 0000001000]
#1 [0000006000 - 0000008000] TRAMPOLINE ==> [0000006000 - 0000008000]
#2 [0000ed1000 - 0000edc000] XEN PAGETABLES ==> [0000ed1000 - 0000edc000]
#3 [0000200000 - 0000777e68] TEXT DATA BSS ==> [0000200000 - 0000777e68]
#4 [0000edc000 - 000162b000] PGTABLE ==> [0000edc000 - 000162b000]
found SMP MP-table at [ffff8800000fe710] 000fe710
Zone PFN ranges:
DMA 0x00000000 -> 0x00001000
DMA32 0x00001000 -> 0x00100000
Normal 0x00100000 -> 0x00100000
Movable zone start PFN for each node
early_node_map[3] active PFN ranges
0: 0x00000000 -> 0x000000a0
0: 0x00000100 -> 0x00000778
0: 0x00000ed1 -> 0x000eaeae
ACPI: PM-Timer IO Port: 0x808
ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled)
ACPI: LAPIC (acpi_id[0x03] lapic_id[0x05] disabled)
ACPI: LAPIC (acpi_id[0x04] lapic_id[0x07] disabled)
ACPI: LAPIC (acpi_id[0x05] lapic_id[0x00] disabled)
ACPI: LAPIC (acpi_id[0x06] lapic_id[0x01] disabled)
ACPI: LAPIC (acpi_id[0x07] lapic_id[0x02] disabled)
ACPI: LAPIC (acpi_id[0x08] lapic_id[0x03] disabled)
ACPI: LAPIC_NMI (acpi_id[0xff] high level lint[0x1])
ACPI: IOAPIC (id[0x08] address[0xfec00000] gsi_base[0])
IOAPIC[0]: apic_id 8, version 0, address 0xfec00000, GSI 0-23
ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
ACPI: HPET id: 0x8086a301 base: 0xfed00000
Using ACPI (MADT) for SMP configuration information
SMP: Allowing 2 CPUs, 0 hotplug CPUs
(XEN) ioapic_guest_write: apic=0, pin=2, old_irq=0, new_irq=-1
(XEN) ioapic_guest_write: old_entry=000009f0, new_entry=00010900
(XEN) ioapic_guest_write: Attempt to remove IO-APIC pin of in-use IRQ!
(XEN) ioapic_guest_write: apic=0, pin=4, old_irq=4, new_irq=-1
(XEN) ioapic_guest_write: old_entry=000009f1, new_entry=00010900
(XEN) ioapic_guest_write: Attempt to remove IO-APIC pin of in-use IRQ!
Allocating PCI resources starting at ec000000 (gap: eaeae000:15152000)
PERCPU: Allocating 57344 bytes of per cpu data
Built 1 zonelists in Zone order, mobility grouping on. Total pages: 945674
Kernel command line: root=/dev/sda2 console=hvc0 earlyprintk=xen
Initializing CPU#0
xen: allocated irq 9 for acpi 9
PID hash table entries: 4096 (order: 12, 32768 bytes)
Detected 2394.042 MHz processor.
Console: colour dummy device 80x25
console handover: boot [xenboot0] -> real [hvc0]
Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes)
Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes)
Checking aperture...
No AGP bridge found
PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
Placing software IO TLB between 0x51ca000 - 0x91ca000
Memory: 3701108k/3848888k available (2519k kernel code, 7908k absent,
139388k reserved, 1546k data, 420k init)
installing Xen timer for CPU 0
Calibrating delay loop (skipped), value calculated using timer
frequency.. 4788.08 BogoMIPS (lpj=9576168)
Mount-cache hash table entries: 256
CPU: L1 I cache: 32K, L1 D cache: 32K
CPU: L2 cache: 4096K
CPU: Physical Processor ID: 0
CPU: Processor Core ID: 0
SMP alternatives: switching to UP code
ACPI: Core revision 20080926
cpu 0 spinlock event irq 17
installing Xen timer for CPU 1
cpu 1 spinlock event irq 23
SMP alternatives: switching to SMP code
Initializing CPU#1
CPU: L1 I cache: 32K, L1 D cache: 32K
CPU: L2 cache: 4096K
CPU: Physical Processor ID: 0
CPU: Processor Core ID: 0
Brought up 2 CPUs
net_namespace: 552 bytes
Booting paravirtualized kernel on Xen
Xen version: 3.3.0 (preserve-AD) (dom0)
Grant table initialized
NET: Registered protocol family 16
xenbus_probe_init ok
ACPI FADT declares the system doesn't support PCIe ASPM, so disable it
ACPI: bus type pci registered
PCI: Using configuration type 1 for base access
ACPI: Interpreter enabled
ACPI: (supports S0 S5)
ACPI: Using IOAPIC for interrupt routing
ACPI: ACPI Dock Station Driver: 1 docks/bays found
ACPI: PCI Root Bridge [PCI0] (0000:00)
pci 0000:00:01.0: PME# supported from D0 D3hot D3cold
pci 0000:00:01.0: PME# disabled
pci 0000:00:03.0: PME# supported from D0 D3hot D3cold
pci 0000:00:03.0: PME# disabled
pci 0000:00:19.0: PME# supported from D0 D3hot D3cold
pci 0000:00:19.0: PME# disabled
pci 0000:00:1a.7: PME# supported from D0 D3hot D3cold
pci 0000:00:1a.7: PME# disabled
pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1b.0: PME# disabled
pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.0: PME# disabled
pci 0000:00:1d.7: PME# supported from D0 D3hot D3cold
pci 0000:00:1d.7: PME# disabled
pci 0000:00:1f.0: quirk: region 0800-087f claimed by ICH6 ACPI/GPIO/TCO
pci 0000:00:1f.0: quirk: region 0880-08bf claimed by ICH6 GPIO
pci 0000:00:1f.2: PME# supported from D3hot
pci 0000:00:1f.2: PME# disabled
pci 0000:00:1e.0: transparent bridge
ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 9 10 *11 12 15)
ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 *5 6 7 9 10 11 12 15)
ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 7 *9 10 11 12 15)
ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 9 *10 11 12 15)
ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 9 10 11 12 15) *0, disabled.
ACPI: PCI Interrupt Link [LNKF] (IRQs *3 4 5 6 7 9 10 11 12 15)
ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 *5 6 7 9 10 11 12 15)
ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 7 9 *10 11 12 15)
ACPI Warning (tbutils-0217): Incorrect checksum in table [TCPA] - 00,
should be 87 [20080926]
xen_balloon: Initialising balloon driver.
SCSI subsystem initialized
PCI: Using ACPI for IRQ routing
pci 0000:00:01.0: BAR 9: can't allocate resource
pci 0000:01:00.0: BAR 0: can't allocate resource
Xen: Initializing Xen DMA ops
Xen: Enabling DMA fallback to swiotlb
PCI-GART: No AMD GART found.
pnp: PnP ACPI init
ACPI: bus type pnp registered
pnp 00:01: io resource (0x800-0x85f) overlaps 0000:00:1f.0 BAR 7
(0x800-0x87f), disabling
pnp 00:01: io resource (0x860-0x8ff) overlaps 0000:00:1f.0 BAR 7
(0x800-0x87f), disabling
system 00:01: ioport range 0xc00-0xc7f has been reserved
xen_set_ioapic_routing: irq 13 gsi 13 vector 120 ioapic 0 pin 13
triggering 1 polarity 0
xen_set_ioapic_routing: irq 8 gsi 8 vector 80 ioapic 0 pin 8
triggering 1 polarity 0
xen_set_ioapic_routing: irq 7 gsi 7 vector 72 ioapic 0 pin 7
triggering 1 polarity 0
xen_set_ioapic_routing: irq 4 gsi 4 vector 241 ioapic 0 pin 4
triggering 1 polarity 0
(XEN) ioapic_guest_write: apic=0, pin=4, old_irq=4, new_irq=4
(XEN) ioapic_guest_write: old_entry=000009f1, new_entry=000189f1
(XEN) ioapic_guest_write: Attempt to modify IO-APIC pin for in-use IRQ!
pnp: PnP ACPI: found 9 devices
ACPI: ACPI bus type pnp unregistered
pci 0000:00:01.0: PCI bridge, secondary bus 0000:01
pci 0000:00:01.0: IO window: 0xd000-0xdfff
pci 0000:00:01.0: MEM window: 0xfe900000-0xfeafffff
pci 0000:00:01.0: PREFETCH window: 0x00000100000000-0x0000010fffffff
pci 0000:00:1c.0: PCI bridge, secondary bus 0000:02
pci 0000:00:1c.0: IO window: disabled
pci 0000:00:1c.0: MEM window: 0xfe800000-0xfe8fffff
pci 0000:00:1c.0: PREFETCH window: disabled
pci 0000:00:1e.0: PCI bridge, secondary bus 0000:03
pci 0000:00:1e.0: IO window: disabled
pci 0000:00:1e.0: MEM window: disabled
pci 0000:00:1e.0: PREFETCH window: disabled
xen_set_ioapic_routing: irq 29 gsi 16 vector 152 ioapic 0 pin 16
triggering 0 polarity 1
pci 0000:00:01.0: PCI INT A -> GSI 16 (level, low) -> IRQ 29
xen: PCI device 0000:00:01.0 pin 1 -> irq 29
xen_allocate_pirq: returning irq 29 for gsi 16
xen_set_ioapic_routing: irq 29 gsi 16 vector 152 ioapic 0 pin 16
triggering 0 polarity 1
pci 0000:00:1c.0: PCI INT A -> GSI 16 (level, low) -> IRQ 29
xen: PCI device 0000:00:1c.0 pin 1 -> irq 29
bus: 00 index 0 io port: [0x00-0xffff]
bus: 00 index 1 mmio: [0x000000-0xffffffffffffffff]
bus: 01 index 0 io port: [0xd000-0xdfff]
bus: 01 index 1 mmio: [0xfe900000-0xfeafffff]
bus: 01 index 2 mmio: [0x100000000-0x10fffffff]
bus: 01 index 3 mmio: [0x0-0x0]
bus: 02 index 0 mmio: [0x0-0x0]
bus: 02 index 1 mmio: [0xfe800000-0xfe8fffff]
bus: 02 index 2 mmio: [0x0-0x0]
bus: 02 index 3 mmio: [0x0-0x0]
bus: 03 index 0 mmio: [0x0-0x0]
bus: 03 index 1 mmio: [0x0-0x0]
bus: 03 index 2 mmio: [0x0-0x0]
bus: 03 index 3 io port: [0x00-0xffff]
bus: 03 index 4 mmio: [0x000000-0xffffffffffffffff]
NET: Registered protocol family 2
IP route cache hash table entries: 131072 (order: 8, 1048576 bytes)
TCP established hash table entries: 262144 (order: 10, 4194304 bytes)
TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
TCP: Hash tables configured (established 262144 bind 65536)
TCP reno registered
NET: Registered protocol family 1
Simple Boot Flag at 0x7a set to 0x1
Installing knfsd (copyright (C) 1996 okir@monad.swb.de).
msgmni has been set to 7517
io scheduler noop registered
io scheduler cfq registered (default)
pcieport-driver 0000:00:01.0: found MSI capability
pcieport-driver 0000:00:1c.0: found MSI capability
input: Power Button (FF) as /class/input/input0
ACPI: Power Button (FF) [PWRF]
input: Power Button (CM) as /class/input/input1
ACPI: Power Button (CM) [VBTN]
xenbus_probe_backend_init bus registered ok
xenbus_probe_frontend_init bus registered ok
Event-channel device installed.
***blkif_init
Real Time Clock Driver v1.12ac
Linux agpgart interface v0.103
floppy0: Unable to grab IRQ6 for the floppy driver
brd: module loaded
loop: module loaded
tun: Universal TUN/TAP device driver, 1.6
tun: (C) 1999-2004 Max Krasnyansky <maxk@qualcomm.com>
console [netcon0] enabled
netconsole: network logging started
Driver 'sd' needs updating - please use bus_type methods
Driver 'sr' needs updating - please use bus_type methods
xen_set_ioapic_routing: irq 31 gsi 18 vector 160 ioapic 0 pin 18
triggering 0 polarity 1
ahci 0000:00:1f.2: PCI INT C -> GSI 18 (level, low) -> IRQ 31
xen: PCI device 0000:00:1f.2 pin 3 -> irq 31
ahci 0000:00:1f.2: AHCI 0001.0200 32 slots 6 ports 3 Gbps 0x27 impl SATA mode
ahci 0000:00:1f.2: flags: 64bit ncq sntf pm led clo pmp pio slum part ems
(XEN) unexpected IRQ trap at vector 59
(XEN) unexpected IRQ trap at vector 59
scsi0 : ahci
scsi1 : ahci
scsi2 : ahci
scsi3 : ahci
scsi4 : ahci
scsi5 : ahci
ata1: SATA max UDMA/133 abar m2048@0xff970000 port 0xff970100 irq 1277
ata2: SATA max UDMA/133 abar m2048@0xff970000 port 0xff970180 irq 1277
ata3: SATA max UDMA/133 abar m2048@0xff970000 port 0xff970200 irq 1277
ata4: DUMMY
ata5: DUMMY
ata6: SATA max UDMA/133 abar m2048@0xff970000 port 0xff970380 irq 1277
(XEN) unexpected IRQ trap at vector 59
ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
(XEN) unexpected IRQ trap at vector 59
ata1.00: qc timeout (cmd 0xec)
ata1.00: failed to IDENTIFY (I/O error, err_mask=0x4)
(XEN) unexpected IRQ trap at vector 59
ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
(XEN) unexpected IRQ trap at vector 59
ata1.00: qc timeout (cmd 0xec)
ata1.00: failed to IDENTIFY (I/O error, err_mask=0x4)
(XEN) unexpected IRQ trap at vector 59
ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
(XEN) unexpected IRQ trap at vector 59
ata1.00: qc timeout (cmd 0xec)
ata1.00: failed to IDENTIFY (I/O error, err_mask=0x4)
(XEN) unexpected IRQ trap at vector 59
ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
(XEN) unexpected IRQ trap at vector 59
ata2.00: qc timeout (cmd 0xa1)
ata2.00: failed to IDENTIFY (I/O error, err_mask=0x4)
ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
(XEN) unexpected IRQ trap at vector 59
ata2.00: qc timeout (cmd 0xa1)
ata2.00: failed to IDENTIFY (I/O error, err_mask=0x4)
ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
(XEN) unexpected IRQ trap at vector 59
ata2.00: qc timeout (cmd 0xa1)
ata2.00: failed to IDENTIFY (I/O error, err_mask=0x4)
ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
ata3: SATA link down (SStatus 4 SControl 300)
ata6: SATA link down (SStatus 4 SControl 300)
PNP: No PS/2 controller found. Probing ports directly.
i8042: probe of i8042 failed with error -38
mice: PS/2 mouse device common for all mice
device-mapper: ioctl: 4.14.0-ioctl (2008-04-23) initialised: dm-devel@redhat.com
cpuidle: using governor ladder
TCP cubic registered
NET: Registered protocol family 17
RPC: Registered udp transport module.
RPC: Registered tcp transport module.
IO APIC resources could be not be allocated.
Root-NFS: No NFS server available, giving up.
VFS: Unable to mount root fs via NFS, trying floppy.
VFS: Insert root floppy and press ENTER
Andy
^ permalink raw reply [flat|nested] 22+ messages in thread
* Re: pv_ops dom0 testing
2008-12-03 16:36 ` Andrew Lyon
@ 2008-12-03 16:43 ` Todd Deshane
2008-12-03 17:10 ` Andrew Lyon
0 siblings, 1 reply; 22+ messages in thread
From: Todd Deshane @ 2008-12-03 16:43 UTC (permalink / raw)
To: Andrew Lyon; +Cc: Jeremy Fitzhardinge, xen-devel
[-- Attachment #1.1: Type: text/plain, Size: 21512 bytes --]
I had the system setup to output to serial and vga console
> (console=vga,com1) but it seems that the vga console only displays Xen
> debug messages,
Here is my grub debug setup for reference
title Xen 3.4-unstable DEBUG/ Ubuntu 8.10, kernel 2.6.28-rc6-tip
root (hd0,0)
kernel /boot/xen-3.4-unstable.gz loglvl=all guest_loglvl=all
com1=115200,8n1 console=com1 mem=3G
module /boot/vmlinuz-2.6.28-rc6-tip root=/dev/sda1 ro console=hvc0
earlyprintk=xen xencons=ttyS0,115200 nousb
module /boot/initrd.img-2.6.28-rc6-tip
> I hooked up a null modem cable and I've now captured
> the full xen and linux dmesg, it appears that the onboard intel ahci
> sata is not working so the kernel is unable to run init:
>
> __ __ _____ _____ ___
>
> \ \/ /___ _ __ |___ / |___ / / _ \
>
> \ // _ \ '_ \ |_ \ |_ \| | | |
>
> / \ __/ | | | ___) | ___) | |_| |
>
> /_/\_\___|_| |_| |____(_)____(_)___/
>
>
>
> (XEN) Xen version 3.3.0 (root@(none)) (gcc version 4.1.2 (Gentoo 4.1.2
> p1.0.2)) Tue Dec 2 15:55:55 GMT 2008
>
> (XEN) Latest ChangeSet: unavailable
>
> (XEN) Command line: com1=115200,8n1 console=vga,com1
>
> (XEN) Video information:
>
> (XEN) VGA is text mode 80x25, font 8x16
>
> (XEN) VBE/DDC methods: V2; EDID transfer time: 1 seconds
>
> (XEN) Disc information:
>
> (XEN) Found 1 MBR signatures
>
> (XEN) Found 1 EDD information structures
>
> (XEN) Xen-e820 RAM map:
>
> (XEN) 0000000000000000 - 000000000009ec00 (usable)
>
> (XEN) 00000000000f0000 - 0000000000100000 (reserved)
>
> (XEN) 0000000000100000 - 00000000cfdff800 (usable)
>
> (XEN) 00000000cfdff800 - 00000000cfe53c00 (ACPI NVS)
>
> (XEN) 00000000cfe53c00 - 00000000cfe55c00 (ACPI data)
>
> (XEN) 00000000cfe55c00 - 00000000d0000000 (reserved)
>
> (XEN) 00000000e0000000 - 00000000f0000000 (reserved)
>
> (XEN) 00000000fec00000 - 00000000fed00400 (reserved)
>
> (XEN) 00000000fed20000 - 00000000feda0000 (reserved)
>
> (XEN) 00000000fee00000 - 00000000fef00000 (reserved)
>
> (XEN) 00000000ffb00000 - 0000000100000000 (reserved)
>
> (XEN) 0000000100000000 - 0000000128000000 (usable)
>
> (XEN) System RAM: 3965MB (4060788kB)
>
> (XEN) ACPI: RSDP 000FEC00, 0024 (r2 DELL )
>
> (XEN) ACPI: XSDT 000FC5B3, 008C (r1 DELL B9K 15 ASL 61)
>
> (XEN) ACPI: FACP 000FC6E3, 00F4 (r3 DELL B9K 15 ASL 61)
>
> (XEN) ACPI: DSDT FFF76B39, 4596 (r1 DELL dt_ex 1000 INTL 20050624)
>
> (XEN) ACPI: FACS CFDFF800, 0040
>
> (XEN) ACPI: SSDT FFF7B1EE, 00AA (r1 DELL st_ex 1000 INTL 20050624)
>
> (XEN) ACPI: APIC 000FC7D7, 0092 (r1 DELL B9K 15 ASL 61)
>
> (XEN) ACPI: BOOT 000FC869, 0028 (r1 DELL B9K 15 ASL 61)
>
> (XEN) ACPI: ASF! 000FC891, 0096 (r32 DELL B9K 15 ASL
> 61)
>
> (XEN) ACPI: MCFG 000FC927, 003E (r1 DELL B9K 15 ASL 61)
>
> (XEN) ACPI: HPET 000FC965, 0038 (r1 DELL B9K 15 ASL 61)
>
> (XEN) ACPI: TCPA 000FCBC1, 0032 (r1 DELL B9K 15 ASL 61)
>
> (XEN) ACPI: DMAR 000FCBF3, 00D0 (r1 DELL B9K 15 ASL 61)
>
> (XEN) ACPI: SLIC 000FC99D, 0176 (r1 DELL B9K 15 ASL 61)
>
> (XEN) ACPI: SSDT CFDFF840, 01F9 (r1 DpgPmm Cpu0Ist 11 INTL 20050624)
>
> (XEN) ACPI: SSDT CFDFFC49, 01F9 (r1 DpgPmm Cpu1Ist 11 INTL 20050624)
>
> (XEN) ACPI: SSDT CFE00052, 0140 (r1 DpgPmm CpuPm 10 INTL 20050624)
>
> (XEN) Xen heap: 14MB (14632kB)
>
> (XEN) Domain heap initialised
>
> (XEN) Processor #0 6:15 APIC version 20
>
> (XEN) Processor #1 6:15 APIC version 20
>
> (XEN) IOAPIC[0]: apic_id 8, version 32, address 0xfec00000, GSI 0-23
>
> (XEN) Enabling APIC mode: Flat. Using 1 I/O APICs
>
> (XEN) Using scheduler: SMP Credit Scheduler (credit)
>
> (XEN) Detected 2394.042 MHz processor.
>
> (XEN) HVM: VMX enabled
>
> (XEN) CPU0: Intel(R) Core(TM)2 CPU 6600 @ 2.40GHz stepping 06
>
> (XEN) Booting processor 1/1 eip 8c000
>
> (XEN) CPU1: Intel(R) Core(TM)2 CPU 6600 @ 2.40GHz stepping 06
>
> (XEN) Total of 2 processors activated.
>
> (XEN) ENABLING IO-APIC IRQs
>
> (XEN) -> Using new ACK method
>
> (XEN) checking TSC synchronization across 2 CPUs: passed.
>
> (XEN) Platform timer is 14.318MHz HPET
>
> (XEN) Brought up 2 CPUs
>
> (XEN) I/O virtualisation disabled
>
> (XEN) *** LOADING DOMAIN 0 ***
>
> (XEN) Xen kernel: 64-bit, lsb, compat32
>
> (XEN) Dom0 kernel: 64-bit, PAE, lsb, paddr 0x200000 -> 0x777e68
>
> (XEN) PHYSICAL MEMORY ARRANGEMENT:
>
> (XEN) Dom0 alloc.: 0000000123000000->0000000124000000 (958126 pages
> to be allocated)
>
> (XEN) VIRTUAL MEMORY ARRANGEMENT:
>
> (XEN) Loaded kernel: ffffffff80200000->ffffffff80777e68
>
> (XEN) Init. ramdisk: ffffffff80778000->ffffffff80778000
>
> (XEN) Phys-Mach map: ffffffff80778000->ffffffff80ecf570
>
> (XEN) Start info: ffffffff80ed0000->ffffffff80ed04a4
>
> (XEN) Page tables: ffffffff80ed1000->ffffffff80edc000
>
> (XEN) Boot stack: ffffffff80edc000->ffffffff80edd000
>
> (XEN) TOTAL: ffffffff80000000->ffffffff81000000
>
> (XEN) ENTRY ADDRESS: ffffffff8064f200
>
> (XEN) Dom0 has maximum 2 VCPUs
>
> (XEN) Scrubbing Free RAM: .done.
>
> (XEN) Xen trace buffers: disabled
>
> (XEN) Std. Loglevel: Errors and warnings
>
> (XEN) Guest Loglevel: Nothing (Rate-limited: Errors and warnings)
>
> (XEN) Xen is relinquishing VGA console.
>
> (XEN) *** Serial input -> DOM0 (type 'CTRL-a' three times to switch
> input to Xen)
>
> (XEN) Freed 108kB init memory.
>
> mapping kernel into physical memory
>
> Xen: setup ISA identity maps
>
> about to get started...
>
> PAT disabled on Xen
>
> Linux version 2.6.28-rc6-tip (root@optiplex755) (gcc version 4.1.2
> (Gentoo 4.1.2 p1.0.2)) #2 SMP Wed Dec 3 15:24:08 GMT 2008
>
> Command line: root=/dev/sda2 console=hvc0 earlyprintk=xen
>
> KERNEL supported cpus:
>
> Intel GenuineIntel
>
> AMD AuthenticAMD
>
> Centaur CentaurHauls
>
> BIOS-provided physical RAM map:
>
> Xen: 0000000000000000 - 00000000000a0000 (usable)
>
> Xen: 00000000000a0000 - 0000000000100000 (reserved)
>
> Xen: 0000000000100000 - 0000000000778000 (usable)
>
> Xen: 0000000000778000 - 0000000000ed1000 (reserved)
>
> Xen: 0000000000ed1000 - 00000000eaeae000 (usable)
>
> console [xenboot0] enabled
>
> DMI 2.5 present.
>
> last_pfn = 0xeaeae max_arch_pfn = 0x3ffffffff
>
> init_memory_mapping: 0000000000000000-00000000eaeae000
>
> last_map_addr: eaeae000 end: eaeae000
>
> ACPI: RSDP 000FEC00, 0024 (r2 DELL )
>
> ACPI: XSDT 000FC5B3, 008C (r1 DELL B9K 15 ASL 61)
>
> ACPI: FACP 000FC6E3, 00F4 (r3 DELL B9K 15 ASL 61)
>
> ACPI: DSDT FFF76B39, 4596 (r1 DELL dt_ex 1000 INTL 20050624)
>
> ACPI: FACS CFDFF800, 0040
>
> ACPI: SSDT FFF7B1EE, 00AA (r1 DELL st_ex 1000 INTL 20050624)
>
> ACPI: APIC 000FC7D7, 0092 (r1 DELL B9K 15 ASL 61)
>
> ACPI: BOOT 000FC869, 0028 (r1 DELL B9K 15 ASL 61)
>
> ACPI: ASF! 000FC891, 0096 (r32 DELL B9K 15 ASL 61)
>
> ACPI: MCFG 000FC927, 003E (r1 DELL B9K 15 ASL 61)
>
> ACPI: HPET 000FC965, 0038 (r1 DELL B9K 15 ASL 61)
>
> ACPI: TCPA 000FCBC1, 0032 (r1 DELL B9K 15 ASL 61)
>
> ACPI: DMAR 000FCBF3, 00D0 (r1 DELL B9K 15 ASL 61)
>
> ACPI: SLIC 000FC99D, 0176 (r1 DELL B9K 15 ASL 61)
>
> ACPI: SSDT CFDFF840, 01F9 (r1 DpgPmm Cpu0Ist 11 INTL 20050624)
>
> ACPI: SSDT CFDFFC49, 01F9 (r1 DpgPmm Cpu1Ist 11 INTL 20050624)
>
> ACPI: SSDT CFE00052, 0140 (r1 DpgPmm CpuPm 10 INTL 20050624)
>
> ACPI: DMI detected: Dell OptiPlex 755
>
> (5 early reservations) ==> bootmem [0000000000 - 00eaeae000]
>
> #0 [0000000000 - 0000001000] BIOS data page ==> [0000000000 -
> 0000001000]
>
> #1 [0000006000 - 0000008000] TRAMPOLINE ==> [0000006000 -
> 0000008000]
>
> #2 [0000ed1000 - 0000edc000] XEN PAGETABLES ==> [0000ed1000 -
> 0000edc000]
>
> #3 [0000200000 - 0000777e68] TEXT DATA BSS ==> [0000200000 -
> 0000777e68]
>
> #4 [0000edc000 - 000162b000] PGTABLE ==> [0000edc000 -
> 000162b000]
>
> found SMP MP-table at [ffff8800000fe710] 000fe710
>
> Zone PFN ranges:
>
> DMA 0x00000000 -> 0x00001000
>
> DMA32 0x00001000 -> 0x00100000
>
> Normal 0x00100000 -> 0x00100000
>
> Movable zone start PFN for each node
>
> early_node_map[3] active PFN ranges
>
> 0: 0x00000000 -> 0x000000a0
>
> 0: 0x00000100 -> 0x00000778
>
> 0: 0x00000ed1 -> 0x000eaeae
>
> ACPI: PM-Timer IO Port: 0x808
>
> ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
>
> ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled)
>
> ACPI: LAPIC (acpi_id[0x03] lapic_id[0x05] disabled)
>
> ACPI: LAPIC (acpi_id[0x04] lapic_id[0x07] disabled)
>
> ACPI: LAPIC (acpi_id[0x05] lapic_id[0x00] disabled)
>
> ACPI: LAPIC (acpi_id[0x06] lapic_id[0x01] disabled)
>
> ACPI: LAPIC (acpi_id[0x07] lapic_id[0x02] disabled)
>
> ACPI: LAPIC (acpi_id[0x08] lapic_id[0x03] disabled)
>
> ACPI: LAPIC_NMI (acpi_id[0xff] high level lint[0x1])
>
> ACPI: IOAPIC (id[0x08] address[0xfec00000] gsi_base[0])
>
> IOAPIC[0]: apic_id 8, version 0, address 0xfec00000, GSI 0-23
>
> ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
>
> ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
>
> ACPI: HPET id: 0x8086a301 base: 0xfed00000
>
> Using ACPI (MADT) for SMP configuration information
>
> SMP: Allowing 2 CPUs, 0 hotplug CPUs
>
> (XEN) ioapic_guest_write: apic=0, pin=2, old_irq=0, new_irq=-1
>
> (XEN) ioapic_guest_write: old_entry=000009f0, new_entry=00010900
>
> (XEN) ioapic_guest_write: Attempt to remove IO-APIC pin of in-use IRQ!
>
> (XEN) ioapic_guest_write: apic=0, pin=4, old_irq=4, new_irq=-1
>
> (XEN) ioapic_guest_write: old_entry=000009f1, new_entry=00010900
>
> (XEN) ioapic_guest_write: Attempt to remove IO-APIC pin of in-use IRQ!
>
> Allocating PCI resources starting at ec000000 (gap: eaeae000:15152000)
>
> PERCPU: Allocating 57344 bytes of per cpu data
>
> Built 1 zonelists in Zone order, mobility grouping on. Total pages: 945674
>
> Kernel command line: root=/dev/sda2 console=hvc0 earlyprintk=xen
>
> Initializing CPU#0
>
> xen: allocated irq 9 for acpi 9
>
> PID hash table entries: 4096 (order: 12, 32768 bytes)
>
> Detected 2394.042 MHz processor.
>
> Console: colour dummy device 80x25
>
> console handover: boot [xenboot0] -> real [hvc0]
>
> Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes)
>
> Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes)
>
> Checking aperture...
>
> No AGP bridge found
>
> PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
>
> Placing software IO TLB between 0x51ca000 - 0x91ca000
>
> Memory: 3701108k/3848888k available (2519k kernel code, 7908k absent,
> 139388k reserved, 1546k data, 420k init)
>
> installing Xen timer for CPU 0
>
> Calibrating delay loop (skipped), value calculated using timer
> frequency.. 4788.08 BogoMIPS (lpj=9576168)
>
> Mount-cache hash table entries: 256
>
> CPU: L1 I cache: 32K, L1 D cache: 32K
>
> CPU: L2 cache: 4096K
>
> CPU: Physical Processor ID: 0
>
> CPU: Processor Core ID: 0
>
> SMP alternatives: switching to UP code
>
> ACPI: Core revision 20080926
>
> cpu 0 spinlock event irq 17
>
> installing Xen timer for CPU 1
>
> cpu 1 spinlock event irq 23
>
> SMP alternatives: switching to SMP code
>
> Initializing CPU#1
>
> CPU: L1 I cache: 32K, L1 D cache: 32K
>
> CPU: L2 cache: 4096K
>
> CPU: Physical Processor ID: 0
>
> CPU: Processor Core ID: 0
>
> Brought up 2 CPUs
>
> net_namespace: 552 bytes
>
> Booting paravirtualized kernel on Xen
>
> Xen version: 3.3.0 (preserve-AD) (dom0)
>
> Grant table initialized
>
> NET: Registered protocol family 16
>
> xenbus_probe_init ok
>
> ACPI FADT declares the system doesn't support PCIe ASPM, so disable it
>
> ACPI: bus type pci registered
>
> PCI: Using configuration type 1 for base access
>
> ACPI: Interpreter enabled
>
> ACPI: (supports S0 S5)
>
> ACPI: Using IOAPIC for interrupt routing
>
> ACPI: ACPI Dock Station Driver: 1 docks/bays found
>
> ACPI: PCI Root Bridge [PCI0] (0000:00)
>
> pci 0000:00:01.0: PME# supported from D0 D3hot D3cold
>
> pci 0000:00:01.0: PME# disabled
>
> pci 0000:00:03.0: PME# supported from D0 D3hot D3cold
>
> pci 0000:00:03.0: PME# disabled
>
> pci 0000:00:19.0: PME# supported from D0 D3hot D3cold
>
> pci 0000:00:19.0: PME# disabled
>
> pci 0000:00:1a.7: PME# supported from D0 D3hot D3cold
>
> pci 0000:00:1a.7: PME# disabled
>
> pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
>
> pci 0000:00:1b.0: PME# disabled
>
> pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
>
> pci 0000:00:1c.0: PME# disabled
>
> pci 0000:00:1d.7: PME# supported from D0 D3hot D3cold
>
> pci 0000:00:1d.7: PME# disabled
>
> pci 0000:00:1f.0: quirk: region 0800-087f claimed by ICH6 ACPI/GPIO/TCO
>
> pci 0000:00:1f.0: quirk: region 0880-08bf claimed by ICH6 GPIO
>
> pci 0000:00:1f.2: PME# supported from D3hot
>
> pci 0000:00:1f.2: PME# disabled
>
> pci 0000:00:1e.0: transparent bridge
>
> ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 9 10 *11 12 15)
>
> ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 *5 6 7 9 10 11 12 15)
>
> ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 7 *9 10 11 12 15)
>
> ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 9 *10 11 12 15)
>
> ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 9 10 11 12 15) *0,
> disabled.
>
> ACPI: PCI Interrupt Link [LNKF] (IRQs *3 4 5 6 7 9 10 11 12 15)
>
> ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 *5 6 7 9 10 11 12 15)
>
> ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 7 9 *10 11 12 15)
>
> ACPI Warning (tbutils-0217): Incorrect checksum in table [TCPA] - 00,
> should be 87 [20080926]
>
> xen_balloon: Initialising balloon driver.
>
> SCSI subsystem initialized
>
> PCI: Using ACPI for IRQ routing
>
> pci 0000:00:01.0: BAR 9: can't allocate resource
>
> pci 0000:01:00.0: BAR 0: can't allocate resource
>
> Xen: Initializing Xen DMA ops
>
> Xen: Enabling DMA fallback to swiotlb
>
> PCI-GART: No AMD GART found.
>
> pnp: PnP ACPI init
>
> ACPI: bus type pnp registered
>
> pnp 00:01: io resource (0x800-0x85f) overlaps 0000:00:1f.0 BAR 7
> (0x800-0x87f), disabling
>
> pnp 00:01: io resource (0x860-0x8ff) overlaps 0000:00:1f.0 BAR 7
> (0x800-0x87f), disabling
>
> system 00:01: ioport range 0xc00-0xc7f has been reserved
>
> xen_set_ioapic_routing: irq 13 gsi 13 vector 120 ioapic 0 pin 13
> triggering 1 polarity 0
>
> xen_set_ioapic_routing: irq 8 gsi 8 vector 80 ioapic 0 pin 8
> triggering 1 polarity 0
>
> xen_set_ioapic_routing: irq 7 gsi 7 vector 72 ioapic 0 pin 7
> triggering 1 polarity 0
>
> xen_set_ioapic_routing: irq 4 gsi 4 vector 241 ioapic 0 pin 4
> triggering 1 polarity 0
>
> (XEN) ioapic_guest_write: apic=0, pin=4, old_irq=4, new_irq=4
>
> (XEN) ioapic_guest_write: old_entry=000009f1, new_entry=000189f1
>
> (XEN) ioapic_guest_write: Attempt to modify IO-APIC pin for in-use IRQ!
>
> pnp: PnP ACPI: found 9 devices
>
> ACPI: ACPI bus type pnp unregistered
>
> pci 0000:00:01.0: PCI bridge, secondary bus 0000:01
>
> pci 0000:00:01.0: IO window: 0xd000-0xdfff
>
> pci 0000:00:01.0: MEM window: 0xfe900000-0xfeafffff
>
> pci 0000:00:01.0: PREFETCH window: 0x00000100000000-0x0000010fffffff
>
> pci 0000:00:1c.0: PCI bridge, secondary bus 0000:02
>
> pci 0000:00:1c.0: IO window: disabled
>
> pci 0000:00:1c.0: MEM window: 0xfe800000-0xfe8fffff
>
> pci 0000:00:1c.0: PREFETCH window: disabled
>
> pci 0000:00:1e.0: PCI bridge, secondary bus 0000:03
>
> pci 0000:00:1e.0: IO window: disabled
>
> pci 0000:00:1e.0: MEM window: disabled
>
> pci 0000:00:1e.0: PREFETCH window: disabled
>
> xen_set_ioapic_routing: irq 29 gsi 16 vector 152 ioapic 0 pin 16
> triggering 0 polarity 1
>
> pci 0000:00:01.0: PCI INT A -> GSI 16 (level, low) -> IRQ 29
>
> xen: PCI device 0000:00:01.0 pin 1 -> irq 29
>
> xen_allocate_pirq: returning irq 29 for gsi 16
>
> xen_set_ioapic_routing: irq 29 gsi 16 vector 152 ioapic 0 pin 16
> triggering 0 polarity 1
>
> pci 0000:00:1c.0: PCI INT A -> GSI 16 (level, low) -> IRQ 29
>
> xen: PCI device 0000:00:1c.0 pin 1 -> irq 29
>
> bus: 00 index 0 io port: [0x00-0xffff]
>
> bus: 00 index 1 mmio: [0x000000-0xffffffffffffffff]
>
> bus: 01 index 0 io port: [0xd000-0xdfff]
>
> bus: 01 index 1 mmio: [0xfe900000-0xfeafffff]
>
> bus: 01 index 2 mmio: [0x100000000-0x10fffffff]
>
> bus: 01 index 3 mmio: [0x0-0x0]
>
> bus: 02 index 0 mmio: [0x0-0x0]
>
> bus: 02 index 1 mmio: [0xfe800000-0xfe8fffff]
>
> bus: 02 index 2 mmio: [0x0-0x0]
>
> bus: 02 index 3 mmio: [0x0-0x0]
>
> bus: 03 index 0 mmio: [0x0-0x0]
>
> bus: 03 index 1 mmio: [0x0-0x0]
>
> bus: 03 index 2 mmio: [0x0-0x0]
>
> bus: 03 index 3 io port: [0x00-0xffff]
>
> bus: 03 index 4 mmio: [0x000000-0xffffffffffffffff]
>
> NET: Registered protocol family 2
>
> IP route cache hash table entries: 131072 (order: 8, 1048576 bytes)
>
> TCP established hash table entries: 262144 (order: 10, 4194304 bytes)
>
> TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
>
> TCP: Hash tables configured (established 262144 bind 65536)
>
> TCP reno registered
>
> NET: Registered protocol family 1
>
> Simple Boot Flag at 0x7a set to 0x1
>
> Installing knfsd (copyright (C) 1996 okir@monad.swb.de).
>
> msgmni has been set to 7517
>
> io scheduler noop registered
>
> io scheduler cfq registered (default)
>
> pcieport-driver 0000:00:01.0: found MSI capability
>
> pcieport-driver 0000:00:1c.0: found MSI capability
>
> input: Power Button (FF) as /class/input/input0
>
> ACPI: Power Button (FF) [PWRF]
>
> input: Power Button (CM) as /class/input/input1
>
> ACPI: Power Button (CM) [VBTN]
>
> xenbus_probe_backend_init bus registered ok
>
> xenbus_probe_frontend_init bus registered ok
>
> Event-channel device installed.
>
> ***blkif_init
>
> Real Time Clock Driver v1.12ac
>
> Linux agpgart interface v0.103
>
> floppy0: Unable to grab IRQ6 for the floppy driver
>
> brd: module loaded
>
> loop: module loaded
>
> tun: Universal TUN/TAP device driver, 1.6
>
> tun: (C) 1999-2004 Max Krasnyansky <maxk@qualcomm.com>
>
> console [netcon0] enabled
>
> netconsole: network logging started
>
> Driver 'sd' needs updating - please use bus_type methods
>
> Driver 'sr' needs updating - please use bus_type methods
>
> xen_set_ioapic_routing: irq 31 gsi 18 vector 160 ioapic 0 pin 18
> triggering 0 polarity 1
>
> ahci 0000:00:1f.2: PCI INT C -> GSI 18 (level, low) -> IRQ 31
>
> xen: PCI device 0000:00:1f.2 pin 3 -> irq 31
>
> ahci 0000:00:1f.2: AHCI 0001.0200 32 slots 6 ports 3 Gbps 0x27 impl SATA
> mode
>
> ahci 0000:00:1f.2: flags: 64bit ncq sntf pm led clo pmp pio slum part ems
>
> (XEN) unexpected IRQ trap at vector 59
>
> (XEN) unexpected IRQ trap at vector 59
>
> scsi0 : ahci
>
> scsi1 : ahci
>
> scsi2 : ahci
>
> scsi3 : ahci
>
> scsi4 : ahci
>
> scsi5 : ahci
>
> ata1: SATA max UDMA/133 abar m2048@0xff970000 port 0xff970100 irq 1277
>
> ata2: SATA max UDMA/133 abar m2048@0xff970000 port 0xff970180 irq 1277
>
> ata3: SATA max UDMA/133 abar m2048@0xff970000 port 0xff970200 irq 1277
>
> ata4: DUMMY
>
> ata5: DUMMY
>
> ata6: SATA max UDMA/133 abar m2048@0xff970000 port 0xff970380 irq 1277
>
> (XEN) unexpected IRQ trap at vector 59
>
> ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
>
> (XEN) unexpected IRQ trap at vector 59
>
> ata1.00: qc timeout (cmd 0xec)
>
> ata1.00: failed to IDENTIFY (I/O error, err_mask=0x4)
>
> (XEN) unexpected IRQ trap at vector 59
>
> ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
>
> (XEN) unexpected IRQ trap at vector 59
>
> ata1.00: qc timeout (cmd 0xec)
>
> ata1.00: failed to IDENTIFY (I/O error, err_mask=0x4)
>
> (XEN) unexpected IRQ trap at vector 59
>
> ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
>
> (XEN) unexpected IRQ trap at vector 59
>
> ata1.00: qc timeout (cmd 0xec)
>
> ata1.00: failed to IDENTIFY (I/O error, err_mask=0x4)
>
> (XEN) unexpected IRQ trap at vector 59
>
> ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
>
> ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
>
> (XEN) unexpected IRQ trap at vector 59
>
> ata2.00: qc timeout (cmd 0xa1)
>
> ata2.00: failed to IDENTIFY (I/O error, err_mask=0x4)
>
> ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
>
> (XEN) unexpected IRQ trap at vector 59
>
> ata2.00: qc timeout (cmd 0xa1)
>
> ata2.00: failed to IDENTIFY (I/O error, err_mask=0x4)
>
> ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
>
> (XEN) unexpected IRQ trap at vector 59
>
> ata2.00: qc timeout (cmd 0xa1)
>
> ata2.00: failed to IDENTIFY (I/O error, err_mask=0x4)
>
> ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
>
> ata3: SATA link down (SStatus 4 SControl 300)
>
> ata6: SATA link down (SStatus 4 SControl 300)
>
> PNP: No PS/2 controller found. Probing ports directly.
>
> i8042: probe of i8042 failed with error -38
>
> mice: PS/2 mouse device common for all mice
>
> device-mapper: ioctl: 4.14.0-ioctl (2008-04-23) initialised:
> dm-devel@redhat.com
>
> cpuidle: using governor ladder
>
> TCP cubic registered
>
> NET: Registered protocol family 17
>
> RPC: Registered udp transport module.
>
> RPC: Registered tcp transport module.
>
> IO APIC resources could be not be allocated.
>
> Root-NFS: No NFS server available, giving up.
>
> VFS: Unable to mount root fs via NFS, trying floppy.
>
> VFS: Insert root floppy and press ENTER
>
> Andy
>
Looks like it is not detecting the drive correctly.
What is your specific controller?
Cheers,
Todd
--
Todd Deshane
http://todddeshane.net
http://runningxen.com
[-- Attachment #1.2: Type: text/html, Size: 26525 bytes --]
[-- Attachment #2: Type: text/plain, Size: 138 bytes --]
_______________________________________________
Xen-devel mailing list
Xen-devel@lists.xensource.com
http://lists.xensource.com/xen-devel
^ permalink raw reply [flat|nested] 22+ messages in thread
* Re: pv_ops dom0 testing
2008-12-03 16:43 ` Todd Deshane
@ 2008-12-03 17:10 ` Andrew Lyon
2008-12-03 17:49 ` Boris Derzhavets
0 siblings, 1 reply; 22+ messages in thread
From: Andrew Lyon @ 2008-12-03 17:10 UTC (permalink / raw)
To: deshantm; +Cc: Jeremy Fitzhardinge, xen-devel
On Wed, Dec 3, 2008 at 4:43 PM, Todd Deshane <deshantm@gmail.com> wrote:
>
>
>> I had the system setup to output to serial and vga console
>> (console=vga,com1) but it seems that the vga console only displays Xen
>> debug messages,
>
> Here is my grub debug setup for reference
>
> title Xen 3.4-unstable DEBUG/ Ubuntu 8.10, kernel 2.6.28-rc6-tip
> root (hd0,0)
> kernel /boot/xen-3.4-unstable.gz loglvl=all guest_loglvl=all
> com1=115200,8n1 console=com1 mem=3G
> module /boot/vmlinuz-2.6.28-rc6-tip root=/dev/sda1 ro console=hvc0
> earlyprintk=xen xencons=ttyS0,115200 nousb
> module /boot/initrd.img-2.6.28-rc6-tip
>
>
>>
>> I hooked up a null modem cable and I've now captured
>> the full xen and linux dmesg, it appears that the onboard intel ahci
>> sata is not working so the kernel is unable to run init:
>>
>> __ __ _____ _____ ___
>>
>> \ \/ /___ _ __ |___ / |___ / / _ \
>>
>> \ // _ \ '_ \ |_ \ |_ \| | | |
>>
>> / \ __/ | | | ___) | ___) | |_| |
>>
>> /_/\_\___|_| |_| |____(_)____(_)___/
>>
>>
>>
>> (XEN) Xen version 3.3.0 (root@(none)) (gcc version 4.1.2 (Gentoo 4.1.2
>> p1.0.2)) Tue Dec 2 15:55:55 GMT 2008
>>
>> (XEN) Latest ChangeSet: unavailable
>>
>> (XEN) Command line: com1=115200,8n1 console=vga,com1
>>
>> (XEN) Video information:
>>
>> (XEN) VGA is text mode 80x25, font 8x16
>>
>> (XEN) VBE/DDC methods: V2; EDID transfer time: 1 seconds
>>
>> (XEN) Disc information:
>>
>> (XEN) Found 1 MBR signatures
>>
>> (XEN) Found 1 EDD information structures
>>
>> (XEN) Xen-e820 RAM map:
>>
>> (XEN) 0000000000000000 - 000000000009ec00 (usable)
>>
>> (XEN) 00000000000f0000 - 0000000000100000 (reserved)
>>
>> (XEN) 0000000000100000 - 00000000cfdff800 (usable)
>>
>> (XEN) 00000000cfdff800 - 00000000cfe53c00 (ACPI NVS)
>>
>> (XEN) 00000000cfe53c00 - 00000000cfe55c00 (ACPI data)
>>
>> (XEN) 00000000cfe55c00 - 00000000d0000000 (reserved)
>>
>> (XEN) 00000000e0000000 - 00000000f0000000 (reserved)
>>
>> (XEN) 00000000fec00000 - 00000000fed00400 (reserved)
>>
>> (XEN) 00000000fed20000 - 00000000feda0000 (reserved)
>>
>> (XEN) 00000000fee00000 - 00000000fef00000 (reserved)
>>
>> (XEN) 00000000ffb00000 - 0000000100000000 (reserved)
>>
>> (XEN) 0000000100000000 - 0000000128000000 (usable)
>>
>> (XEN) System RAM: 3965MB (4060788kB)
>>
>> (XEN) ACPI: RSDP 000FEC00, 0024 (r2 DELL )
>>
>> (XEN) ACPI: XSDT 000FC5B3, 008C (r1 DELL B9K 15 ASL
>> 61)
>>
>> (XEN) ACPI: FACP 000FC6E3, 00F4 (r3 DELL B9K 15 ASL
>> 61)
>>
>> (XEN) ACPI: DSDT FFF76B39, 4596 (r1 DELL dt_ex 1000 INTL
>> 20050624)
>>
>> (XEN) ACPI: FACS CFDFF800, 0040
>>
>> (XEN) ACPI: SSDT FFF7B1EE, 00AA (r1 DELL st_ex 1000 INTL
>> 20050624)
>>
>> (XEN) ACPI: APIC 000FC7D7, 0092 (r1 DELL B9K 15 ASL
>> 61)
>>
>> (XEN) ACPI: BOOT 000FC869, 0028 (r1 DELL B9K 15 ASL
>> 61)
>>
>> (XEN) ACPI: ASF! 000FC891, 0096 (r32 DELL B9K 15 ASL
>> 61)
>>
>> (XEN) ACPI: MCFG 000FC927, 003E (r1 DELL B9K 15 ASL
>> 61)
>>
>> (XEN) ACPI: HPET 000FC965, 0038 (r1 DELL B9K 15 ASL
>> 61)
>>
>> (XEN) ACPI: TCPA 000FCBC1, 0032 (r1 DELL B9K 15 ASL
>> 61)
>>
>> (XEN) ACPI: DMAR 000FCBF3, 00D0 (r1 DELL B9K 15 ASL
>> 61)
>>
>> (XEN) ACPI: SLIC 000FC99D, 0176 (r1 DELL B9K 15 ASL
>> 61)
>>
>> (XEN) ACPI: SSDT CFDFF840, 01F9 (r1 DpgPmm Cpu0Ist 11 INTL
>> 20050624)
>>
>> (XEN) ACPI: SSDT CFDFFC49, 01F9 (r1 DpgPmm Cpu1Ist 11 INTL
>> 20050624)
>>
>> (XEN) ACPI: SSDT CFE00052, 0140 (r1 DpgPmm CpuPm 10 INTL
>> 20050624)
>>
>> (XEN) Xen heap: 14MB (14632kB)
>>
>> (XEN) Domain heap initialised
>>
>> (XEN) Processor #0 6:15 APIC version 20
>>
>> (XEN) Processor #1 6:15 APIC version 20
>>
>> (XEN) IOAPIC[0]: apic_id 8, version 32, address 0xfec00000, GSI 0-23
>>
>> (XEN) Enabling APIC mode: Flat. Using 1 I/O APICs
>>
>> (XEN) Using scheduler: SMP Credit Scheduler (credit)
>>
>> (XEN) Detected 2394.042 MHz processor.
>>
>> (XEN) HVM: VMX enabled
>>
>> (XEN) CPU0: Intel(R) Core(TM)2 CPU 6600 @ 2.40GHz stepping 06
>>
>> (XEN) Booting processor 1/1 eip 8c000
>>
>> (XEN) CPU1: Intel(R) Core(TM)2 CPU 6600 @ 2.40GHz stepping 06
>>
>> (XEN) Total of 2 processors activated.
>>
>> (XEN) ENABLING IO-APIC IRQs
>>
>> (XEN) -> Using new ACK method
>>
>> (XEN) checking TSC synchronization across 2 CPUs: passed.
>>
>> (XEN) Platform timer is 14.318MHz HPET
>>
>> (XEN) Brought up 2 CPUs
>>
>> (XEN) I/O virtualisation disabled
>>
>> (XEN) *** LOADING DOMAIN 0 ***
>>
>> (XEN) Xen kernel: 64-bit, lsb, compat32
>>
>> (XEN) Dom0 kernel: 64-bit, PAE, lsb, paddr 0x200000 -> 0x777e68
>>
>> (XEN) PHYSICAL MEMORY ARRANGEMENT:
>>
>> (XEN) Dom0 alloc.: 0000000123000000->0000000124000000 (958126 pages
>> to be allocated)
>>
>> (XEN) VIRTUAL MEMORY ARRANGEMENT:
>>
>> (XEN) Loaded kernel: ffffffff80200000->ffffffff80777e68
>>
>> (XEN) Init. ramdisk: ffffffff80778000->ffffffff80778000
>>
>> (XEN) Phys-Mach map: ffffffff80778000->ffffffff80ecf570
>>
>> (XEN) Start info: ffffffff80ed0000->ffffffff80ed04a4
>>
>> (XEN) Page tables: ffffffff80ed1000->ffffffff80edc000
>>
>> (XEN) Boot stack: ffffffff80edc000->ffffffff80edd000
>>
>> (XEN) TOTAL: ffffffff80000000->ffffffff81000000
>>
>> (XEN) ENTRY ADDRESS: ffffffff8064f200
>>
>> (XEN) Dom0 has maximum 2 VCPUs
>>
>> (XEN) Scrubbing Free RAM: .done.
>>
>> (XEN) Xen trace buffers: disabled
>>
>> (XEN) Std. Loglevel: Errors and warnings
>>
>> (XEN) Guest Loglevel: Nothing (Rate-limited: Errors and warnings)
>>
>> (XEN) Xen is relinquishing VGA console.
>>
>> (XEN) *** Serial input -> DOM0 (type 'CTRL-a' three times to switch
>> input to Xen)
>>
>> (XEN) Freed 108kB init memory.
>>
>> mapping kernel into physical memory
>>
>> Xen: setup ISA identity maps
>>
>> about to get started...
>>
>> PAT disabled on Xen
>>
>> Linux version 2.6.28-rc6-tip (root@optiplex755) (gcc version 4.1.2
>> (Gentoo 4.1.2 p1.0.2)) #2 SMP Wed Dec 3 15:24:08 GMT 2008
>>
>> Command line: root=/dev/sda2 console=hvc0 earlyprintk=xen
>>
>> KERNEL supported cpus:
>>
>> Intel GenuineIntel
>>
>> AMD AuthenticAMD
>>
>> Centaur CentaurHauls
>>
>> BIOS-provided physical RAM map:
>>
>> Xen: 0000000000000000 - 00000000000a0000 (usable)
>>
>> Xen: 00000000000a0000 - 0000000000100000 (reserved)
>>
>> Xen: 0000000000100000 - 0000000000778000 (usable)
>>
>> Xen: 0000000000778000 - 0000000000ed1000 (reserved)
>>
>> Xen: 0000000000ed1000 - 00000000eaeae000 (usable)
>>
>> console [xenboot0] enabled
>>
>> DMI 2.5 present.
>>
>> last_pfn = 0xeaeae max_arch_pfn = 0x3ffffffff
>>
>> init_memory_mapping: 0000000000000000-00000000eaeae000
>>
>> last_map_addr: eaeae000 end: eaeae000
>>
>> ACPI: RSDP 000FEC00, 0024 (r2 DELL )
>>
>> ACPI: XSDT 000FC5B3, 008C (r1 DELL B9K 15 ASL 61)
>>
>> ACPI: FACP 000FC6E3, 00F4 (r3 DELL B9K 15 ASL 61)
>>
>> ACPI: DSDT FFF76B39, 4596 (r1 DELL dt_ex 1000 INTL 20050624)
>>
>> ACPI: FACS CFDFF800, 0040
>>
>> ACPI: SSDT FFF7B1EE, 00AA (r1 DELL st_ex 1000 INTL 20050624)
>>
>> ACPI: APIC 000FC7D7, 0092 (r1 DELL B9K 15 ASL 61)
>>
>> ACPI: BOOT 000FC869, 0028 (r1 DELL B9K 15 ASL 61)
>>
>> ACPI: ASF! 000FC891, 0096 (r32 DELL B9K 15 ASL 61)
>>
>> ACPI: MCFG 000FC927, 003E (r1 DELL B9K 15 ASL 61)
>>
>> ACPI: HPET 000FC965, 0038 (r1 DELL B9K 15 ASL 61)
>>
>> ACPI: TCPA 000FCBC1, 0032 (r1 DELL B9K 15 ASL 61)
>>
>> ACPI: DMAR 000FCBF3, 00D0 (r1 DELL B9K 15 ASL 61)
>>
>> ACPI: SLIC 000FC99D, 0176 (r1 DELL B9K 15 ASL 61)
>>
>> ACPI: SSDT CFDFF840, 01F9 (r1 DpgPmm Cpu0Ist 11 INTL 20050624)
>>
>> ACPI: SSDT CFDFFC49, 01F9 (r1 DpgPmm Cpu1Ist 11 INTL 20050624)
>>
>> ACPI: SSDT CFE00052, 0140 (r1 DpgPmm CpuPm 10 INTL 20050624)
>>
>> ACPI: DMI detected: Dell OptiPlex 755
>>
>> (5 early reservations) ==> bootmem [0000000000 - 00eaeae000]
>>
>> #0 [0000000000 - 0000001000] BIOS data page ==> [0000000000 -
>> 0000001000]
>>
>> #1 [0000006000 - 0000008000] TRAMPOLINE ==> [0000006000 -
>> 0000008000]
>>
>> #2 [0000ed1000 - 0000edc000] XEN PAGETABLES ==> [0000ed1000 -
>> 0000edc000]
>>
>> #3 [0000200000 - 0000777e68] TEXT DATA BSS ==> [0000200000 -
>> 0000777e68]
>>
>> #4 [0000edc000 - 000162b000] PGTABLE ==> [0000edc000 -
>> 000162b000]
>>
>> found SMP MP-table at [ffff8800000fe710] 000fe710
>>
>> Zone PFN ranges:
>>
>> DMA 0x00000000 -> 0x00001000
>>
>> DMA32 0x00001000 -> 0x00100000
>>
>> Normal 0x00100000 -> 0x00100000
>>
>> Movable zone start PFN for each node
>>
>> early_node_map[3] active PFN ranges
>>
>> 0: 0x00000000 -> 0x000000a0
>>
>> 0: 0x00000100 -> 0x00000778
>>
>> 0: 0x00000ed1 -> 0x000eaeae
>>
>> ACPI: PM-Timer IO Port: 0x808
>>
>> ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
>>
>> ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled)
>>
>> ACPI: LAPIC (acpi_id[0x03] lapic_id[0x05] disabled)
>>
>> ACPI: LAPIC (acpi_id[0x04] lapic_id[0x07] disabled)
>>
>> ACPI: LAPIC (acpi_id[0x05] lapic_id[0x00] disabled)
>>
>> ACPI: LAPIC (acpi_id[0x06] lapic_id[0x01] disabled)
>>
>> ACPI: LAPIC (acpi_id[0x07] lapic_id[0x02] disabled)
>>
>> ACPI: LAPIC (acpi_id[0x08] lapic_id[0x03] disabled)
>>
>> ACPI: LAPIC_NMI (acpi_id[0xff] high level lint[0x1])
>>
>> ACPI: IOAPIC (id[0x08] address[0xfec00000] gsi_base[0])
>>
>> IOAPIC[0]: apic_id 8, version 0, address 0xfec00000, GSI 0-23
>>
>> ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
>>
>> ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
>>
>> ACPI: HPET id: 0x8086a301 base: 0xfed00000
>>
>> Using ACPI (MADT) for SMP configuration information
>>
>> SMP: Allowing 2 CPUs, 0 hotplug CPUs
>>
>> (XEN) ioapic_guest_write: apic=0, pin=2, old_irq=0, new_irq=-1
>>
>> (XEN) ioapic_guest_write: old_entry=000009f0, new_entry=00010900
>>
>> (XEN) ioapic_guest_write: Attempt to remove IO-APIC pin of in-use IRQ!
>>
>> (XEN) ioapic_guest_write: apic=0, pin=4, old_irq=4, new_irq=-1
>>
>> (XEN) ioapic_guest_write: old_entry=000009f1, new_entry=00010900
>>
>> (XEN) ioapic_guest_write: Attempt to remove IO-APIC pin of in-use IRQ!
>>
>> Allocating PCI resources starting at ec000000 (gap: eaeae000:15152000)
>>
>> PERCPU: Allocating 57344 bytes of per cpu data
>>
>> Built 1 zonelists in Zone order, mobility grouping on. Total pages:
>> 945674
>>
>> Kernel command line: root=/dev/sda2 console=hvc0 earlyprintk=xen
>>
>> Initializing CPU#0
>>
>> xen: allocated irq 9 for acpi 9
>>
>> PID hash table entries: 4096 (order: 12, 32768 bytes)
>>
>> Detected 2394.042 MHz processor.
>>
>> Console: colour dummy device 80x25
>>
>> console handover: boot [xenboot0] -> real [hvc0]
>>
>> Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes)
>>
>> Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes)
>>
>> Checking aperture...
>>
>> No AGP bridge found
>>
>> PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
>>
>> Placing software IO TLB between 0x51ca000 - 0x91ca000
>>
>> Memory: 3701108k/3848888k available (2519k kernel code, 7908k absent,
>> 139388k reserved, 1546k data, 420k init)
>>
>> installing Xen timer for CPU 0
>>
>> Calibrating delay loop (skipped), value calculated using timer
>> frequency.. 4788.08 BogoMIPS (lpj=9576168)
>>
>> Mount-cache hash table entries: 256
>>
>> CPU: L1 I cache: 32K, L1 D cache: 32K
>>
>> CPU: L2 cache: 4096K
>>
>> CPU: Physical Processor ID: 0
>>
>> CPU: Processor Core ID: 0
>>
>> SMP alternatives: switching to UP code
>>
>> ACPI: Core revision 20080926
>>
>> cpu 0 spinlock event irq 17
>>
>> installing Xen timer for CPU 1
>>
>> cpu 1 spinlock event irq 23
>>
>> SMP alternatives: switching to SMP code
>>
>> Initializing CPU#1
>>
>> CPU: L1 I cache: 32K, L1 D cache: 32K
>>
>> CPU: L2 cache: 4096K
>>
>> CPU: Physical Processor ID: 0
>>
>> CPU: Processor Core ID: 0
>>
>> Brought up 2 CPUs
>>
>> net_namespace: 552 bytes
>>
>> Booting paravirtualized kernel on Xen
>>
>> Xen version: 3.3.0 (preserve-AD) (dom0)
>>
>> Grant table initialized
>>
>> NET: Registered protocol family 16
>>
>> xenbus_probe_init ok
>>
>> ACPI FADT declares the system doesn't support PCIe ASPM, so disable it
>>
>> ACPI: bus type pci registered
>>
>> PCI: Using configuration type 1 for base access
>>
>> ACPI: Interpreter enabled
>>
>> ACPI: (supports S0 S5)
>>
>> ACPI: Using IOAPIC for interrupt routing
>>
>> ACPI: ACPI Dock Station Driver: 1 docks/bays found
>>
>> ACPI: PCI Root Bridge [PCI0] (0000:00)
>>
>> pci 0000:00:01.0: PME# supported from D0 D3hot D3cold
>>
>> pci 0000:00:01.0: PME# disabled
>>
>> pci 0000:00:03.0: PME# supported from D0 D3hot D3cold
>>
>> pci 0000:00:03.0: PME# disabled
>>
>> pci 0000:00:19.0: PME# supported from D0 D3hot D3cold
>>
>> pci 0000:00:19.0: PME# disabled
>>
>> pci 0000:00:1a.7: PME# supported from D0 D3hot D3cold
>>
>> pci 0000:00:1a.7: PME# disabled
>>
>> pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
>>
>> pci 0000:00:1b.0: PME# disabled
>>
>> pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
>>
>> pci 0000:00:1c.0: PME# disabled
>>
>> pci 0000:00:1d.7: PME# supported from D0 D3hot D3cold
>>
>> pci 0000:00:1d.7: PME# disabled
>>
>> pci 0000:00:1f.0: quirk: region 0800-087f claimed by ICH6 ACPI/GPIO/TCO
>>
>> pci 0000:00:1f.0: quirk: region 0880-08bf claimed by ICH6 GPIO
>>
>> pci 0000:00:1f.2: PME# supported from D3hot
>>
>> pci 0000:00:1f.2: PME# disabled
>>
>> pci 0000:00:1e.0: transparent bridge
>>
>> ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 9 10 *11 12 15)
>>
>> ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 *5 6 7 9 10 11 12 15)
>>
>> ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 7 *9 10 11 12 15)
>>
>> ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 9 *10 11 12 15)
>>
>> ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 9 10 11 12 15) *0,
>> disabled.
>>
>> ACPI: PCI Interrupt Link [LNKF] (IRQs *3 4 5 6 7 9 10 11 12 15)
>>
>> ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 *5 6 7 9 10 11 12 15)
>>
>> ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 7 9 *10 11 12 15)
>>
>> ACPI Warning (tbutils-0217): Incorrect checksum in table [TCPA] - 00,
>> should be 87 [20080926]
>>
>> xen_balloon: Initialising balloon driver.
>>
>> SCSI subsystem initialized
>>
>> PCI: Using ACPI for IRQ routing
>>
>> pci 0000:00:01.0: BAR 9: can't allocate resource
>>
>> pci 0000:01:00.0: BAR 0: can't allocate resource
>>
>> Xen: Initializing Xen DMA ops
>>
>> Xen: Enabling DMA fallback to swiotlb
>>
>> PCI-GART: No AMD GART found.
>>
>> pnp: PnP ACPI init
>>
>> ACPI: bus type pnp registered
>>
>> pnp 00:01: io resource (0x800-0x85f) overlaps 0000:00:1f.0 BAR 7
>> (0x800-0x87f), disabling
>>
>> pnp 00:01: io resource (0x860-0x8ff) overlaps 0000:00:1f.0 BAR 7
>> (0x800-0x87f), disabling
>>
>> system 00:01: ioport range 0xc00-0xc7f has been reserved
>>
>> xen_set_ioapic_routing: irq 13 gsi 13 vector 120 ioapic 0 pin 13
>> triggering 1 polarity 0
>>
>> xen_set_ioapic_routing: irq 8 gsi 8 vector 80 ioapic 0 pin 8
>> triggering 1 polarity 0
>>
>> xen_set_ioapic_routing: irq 7 gsi 7 vector 72 ioapic 0 pin 7
>> triggering 1 polarity 0
>>
>> xen_set_ioapic_routing: irq 4 gsi 4 vector 241 ioapic 0 pin 4
>> triggering 1 polarity 0
>>
>> (XEN) ioapic_guest_write: apic=0, pin=4, old_irq=4, new_irq=4
>>
>> (XEN) ioapic_guest_write: old_entry=000009f1, new_entry=000189f1
>>
>> (XEN) ioapic_guest_write: Attempt to modify IO-APIC pin for in-use IRQ!
>>
>> pnp: PnP ACPI: found 9 devices
>>
>> ACPI: ACPI bus type pnp unregistered
>>
>> pci 0000:00:01.0: PCI bridge, secondary bus 0000:01
>>
>> pci 0000:00:01.0: IO window: 0xd000-0xdfff
>>
>> pci 0000:00:01.0: MEM window: 0xfe900000-0xfeafffff
>>
>> pci 0000:00:01.0: PREFETCH window: 0x00000100000000-0x0000010fffffff
>>
>> pci 0000:00:1c.0: PCI bridge, secondary bus 0000:02
>>
>> pci 0000:00:1c.0: IO window: disabled
>>
>> pci 0000:00:1c.0: MEM window: 0xfe800000-0xfe8fffff
>>
>> pci 0000:00:1c.0: PREFETCH window: disabled
>>
>> pci 0000:00:1e.0: PCI bridge, secondary bus 0000:03
>>
>> pci 0000:00:1e.0: IO window: disabled
>>
>> pci 0000:00:1e.0: MEM window: disabled
>>
>> pci 0000:00:1e.0: PREFETCH window: disabled
>>
>> xen_set_ioapic_routing: irq 29 gsi 16 vector 152 ioapic 0 pin 16
>> triggering 0 polarity 1
>>
>> pci 0000:00:01.0: PCI INT A -> GSI 16 (level, low) -> IRQ 29
>>
>> xen: PCI device 0000:00:01.0 pin 1 -> irq 29
>>
>> xen_allocate_pirq: returning irq 29 for gsi 16
>>
>> xen_set_ioapic_routing: irq 29 gsi 16 vector 152 ioapic 0 pin 16
>> triggering 0 polarity 1
>>
>> pci 0000:00:1c.0: PCI INT A -> GSI 16 (level, low) -> IRQ 29
>>
>> xen: PCI device 0000:00:1c.0 pin 1 -> irq 29
>>
>> bus: 00 index 0 io port: [0x00-0xffff]
>>
>> bus: 00 index 1 mmio: [0x000000-0xffffffffffffffff]
>>
>> bus: 01 index 0 io port: [0xd000-0xdfff]
>>
>> bus: 01 index 1 mmio: [0xfe900000-0xfeafffff]
>>
>> bus: 01 index 2 mmio: [0x100000000-0x10fffffff]
>>
>> bus: 01 index 3 mmio: [0x0-0x0]
>>
>> bus: 02 index 0 mmio: [0x0-0x0]
>>
>> bus: 02 index 1 mmio: [0xfe800000-0xfe8fffff]
>>
>> bus: 02 index 2 mmio: [0x0-0x0]
>>
>> bus: 02 index 3 mmio: [0x0-0x0]
>>
>> bus: 03 index 0 mmio: [0x0-0x0]
>>
>> bus: 03 index 1 mmio: [0x0-0x0]
>>
>> bus: 03 index 2 mmio: [0x0-0x0]
>>
>> bus: 03 index 3 io port: [0x00-0xffff]
>>
>> bus: 03 index 4 mmio: [0x000000-0xffffffffffffffff]
>>
>> NET: Registered protocol family 2
>>
>> IP route cache hash table entries: 131072 (order: 8, 1048576 bytes)
>>
>> TCP established hash table entries: 262144 (order: 10, 4194304 bytes)
>>
>> TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
>>
>> TCP: Hash tables configured (established 262144 bind 65536)
>>
>> TCP reno registered
>>
>> NET: Registered protocol family 1
>>
>> Simple Boot Flag at 0x7a set to 0x1
>>
>> Installing knfsd (copyright (C) 1996 okir@monad.swb.de).
>>
>> msgmni has been set to 7517
>>
>> io scheduler noop registered
>>
>> io scheduler cfq registered (default)
>>
>> pcieport-driver 0000:00:01.0: found MSI capability
>>
>> pcieport-driver 0000:00:1c.0: found MSI capability
>>
>> input: Power Button (FF) as /class/input/input0
>>
>> ACPI: Power Button (FF) [PWRF]
>>
>> input: Power Button (CM) as /class/input/input1
>>
>> ACPI: Power Button (CM) [VBTN]
>>
>> xenbus_probe_backend_init bus registered ok
>>
>> xenbus_probe_frontend_init bus registered ok
>>
>> Event-channel device installed.
>>
>> ***blkif_init
>>
>> Real Time Clock Driver v1.12ac
>>
>> Linux agpgart interface v0.103
>>
>> floppy0: Unable to grab IRQ6 for the floppy driver
>>
>> brd: module loaded
>>
>> loop: module loaded
>>
>> tun: Universal TUN/TAP device driver, 1.6
>>
>> tun: (C) 1999-2004 Max Krasnyansky <maxk@qualcomm.com>
>>
>> console [netcon0] enabled
>>
>> netconsole: network logging started
>>
>> Driver 'sd' needs updating - please use bus_type methods
>>
>> Driver 'sr' needs updating - please use bus_type methods
>>
>> xen_set_ioapic_routing: irq 31 gsi 18 vector 160 ioapic 0 pin 18
>> triggering 0 polarity 1
>>
>> ahci 0000:00:1f.2: PCI INT C -> GSI 18 (level, low) -> IRQ 31
>>
>> xen: PCI device 0000:00:1f.2 pin 3 -> irq 31
>>
>> ahci 0000:00:1f.2: AHCI 0001.0200 32 slots 6 ports 3 Gbps 0x27 impl SATA
>> mode
>>
>> ahci 0000:00:1f.2: flags: 64bit ncq sntf pm led clo pmp pio slum part ems
>>
>> (XEN) unexpected IRQ trap at vector 59
>>
>> (XEN) unexpected IRQ trap at vector 59
>>
>> scsi0 : ahci
>>
>> scsi1 : ahci
>>
>> scsi2 : ahci
>>
>> scsi3 : ahci
>>
>> scsi4 : ahci
>>
>> scsi5 : ahci
>>
>> ata1: SATA max UDMA/133 abar m2048@0xff970000 port 0xff970100 irq 1277
>>
>> ata2: SATA max UDMA/133 abar m2048@0xff970000 port 0xff970180 irq 1277
>>
>> ata3: SATA max UDMA/133 abar m2048@0xff970000 port 0xff970200 irq 1277
>>
>> ata4: DUMMY
>>
>> ata5: DUMMY
>>
>> ata6: SATA max UDMA/133 abar m2048@0xff970000 port 0xff970380 irq 1277
>>
>> (XEN) unexpected IRQ trap at vector 59
>>
>> ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
>>
>> (XEN) unexpected IRQ trap at vector 59
>>
>> ata1.00: qc timeout (cmd 0xec)
>>
>> ata1.00: failed to IDENTIFY (I/O error, err_mask=0x4)
>>
>> (XEN) unexpected IRQ trap at vector 59
>>
>> ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
>>
>> (XEN) unexpected IRQ trap at vector 59
>>
>> ata1.00: qc timeout (cmd 0xec)
>>
>> ata1.00: failed to IDENTIFY (I/O error, err_mask=0x4)
>>
>> (XEN) unexpected IRQ trap at vector 59
>>
>> ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
>>
>> (XEN) unexpected IRQ trap at vector 59
>>
>> ata1.00: qc timeout (cmd 0xec)
>>
>> ata1.00: failed to IDENTIFY (I/O error, err_mask=0x4)
>>
>> (XEN) unexpected IRQ trap at vector 59
>>
>> ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
>>
>> ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
>>
>> (XEN) unexpected IRQ trap at vector 59
>>
>> ata2.00: qc timeout (cmd 0xa1)
>>
>> ata2.00: failed to IDENTIFY (I/O error, err_mask=0x4)
>>
>> ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
>>
>> (XEN) unexpected IRQ trap at vector 59
>>
>> ata2.00: qc timeout (cmd 0xa1)
>>
>> ata2.00: failed to IDENTIFY (I/O error, err_mask=0x4)
>>
>> ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
>>
>> (XEN) unexpected IRQ trap at vector 59
>>
>> ata2.00: qc timeout (cmd 0xa1)
>>
>> ata2.00: failed to IDENTIFY (I/O error, err_mask=0x4)
>>
>> ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
>>
>> ata3: SATA link down (SStatus 4 SControl 300)
>>
>> ata6: SATA link down (SStatus 4 SControl 300)
>>
>> PNP: No PS/2 controller found. Probing ports directly.
>>
>> i8042: probe of i8042 failed with error -38
>>
>> mice: PS/2 mouse device common for all mice
>>
>> device-mapper: ioctl: 4.14.0-ioctl (2008-04-23) initialised:
>> dm-devel@redhat.com
>>
>> cpuidle: using governor ladder
>>
>> TCP cubic registered
>>
>> NET: Registered protocol family 17
>>
>> RPC: Registered udp transport module.
>>
>> RPC: Registered tcp transport module.
>>
>> IO APIC resources could be not be allocated.
>>
>> Root-NFS: No NFS server available, giving up.
>>
>> VFS: Unable to mount root fs via NFS, trying floppy.
>>
>> VFS: Insert root floppy and press ENTER
>>
>> Andy
>
> Looks like it is not detecting the drive correctly.
>
> What is your specific controller?
The system is a Dell Optiplex 755 with Intel onboard sata, I'm having
trouble finding the controller model and lspci only shows that it is
AHCI:
00:1f.2 SATA controller: Intel Corporation 6 port SATA AHCI Controller (rev 02)
It is my Xen test server and has been running gentoo linux with both
vanilla kernel 2.6.27 (no xen) and 2.6.27+opensuse xen dom0 patches, I
wanted to start my pv_ops dom0 testing with a machine that I know can
run Xen successfully.
The HD is a Toshiba 2.5" drive as that is all I had to hand when I
installed Gentoo Linux onto this machine, do you think its worth
swapping that for a 3.5"? I've got a raptor lying around somwhere...
Andy
>
> Cheers,
> Todd
>
> --
> Todd Deshane
> http://todddeshane.net
> http://runningxen.com
>
^ permalink raw reply [flat|nested] 22+ messages in thread
* Re: pv_ops dom0 testing
@ 2008-12-03 17:36 Boris Derzhavets
0 siblings, 0 replies; 22+ messages in thread
From: Boris Derzhavets @ 2008-12-03 17:36 UTC (permalink / raw)
To: deshantm; +Cc: xen-devel
[-- Attachment #1.1: Type: text/plain, Size: 23858 bytes --]
(XEN) CPU0: Intel(R) Core(TM)2 CPU 6600 @ 2.40GHz stepping 06
(XEN) Booting processor 1/1 eip 8c000
(XEN) CPU1: Intel(R) Core(TM)2 CPU 6600 @ 2.40GHz stepping 06
. . . . . . . .
pci 0000:00:1f.0: quirk: region 0800-087f claimed by ICH6 ACPI/GPIO/TCO
pci 0000:00:1f.0: quirk: region 0880-08bf claimed by ICH6 GPIO
If South Bridge on your board is Intel ICH6 , then it doesn't support AHCI
Intel ICH7R,ICH8R,ICH9R,ICH10R do have AHCI support.
ASUS P5K Premium/WIFI, ASUS P5E ,P5E WS and higher with South
Bridge ICH9R work just fine in AHCI mode.
Thanks for grub profile.
--- On Wed, 12/3/08, Todd Deshane
<deshantm@gmail.com> wrote:
From: Todd Deshane <deshantm@gmail.com>
Subject: Re: [Xen-devel] pv_ops dom0 testing
To: "Andrew Lyon" <andrew.lyon@gmail.com>
Cc: "Jeremy Fitzhardinge" <jeremy@goop.org>, xen-devel@lists.xensource.com
Date: Wednesday, December 3, 2008, 11:43 AM
I had the system setup to output to serial and vga console
(console=vga,com1) but it seems that the vga console only displays Xen
debug messages,
Here is my grub debug setup for reference
title Xen 3.4-unstable DEBUG/ Ubuntu 8.10, kernel 2.6.28-rc6-tip
root (hd0,0)
kernel /boot/xen-3.4-unstable.gz loglvl=all guest_loglvl=all com1=115200,8n1 console=com1 mem=3G
module /boot/vmlinuz-2.6.28-rc6-tip root=/dev/sda1 ro console=hvc0 earlyprintk=xen xencons=ttyS0,115200 nousb
module /boot/initrd.img-2.6.28-rc6-tip
I hooked up a null modem cable and I've now captured
the full xen and linux dmesg, it appears that the onboard intel ahci
sata is not working
so the kernel is unable to run init:
__ __ _____ _____ ___
\ \/ /___ _ __ |___ / |___ / / _ \
\ // _ \ '_ \ |_ \ |_ \| | | |
/ \ __/ | | | ___) | ___) | |_| |
/_/\_\___|_| |_| |____(_)____(_)___/
(XEN) Xen version 3.3.0 (root@(none)) (gcc version 4.1.2 (Gentoo 4.1.2
p1.0.2)) Tue Dec 2 15:55:55 GMT 2008
(XEN) Latest ChangeSet: unavailable
(XEN) Command line: com1=115200,8n1 console=vga,com1
(XEN) Video information:
(XEN) VGA is text mode 80x25, font 8x16
(XEN) VBE/DDC methods: V2; EDID transfer time: 1 seconds
(XEN) Disc information:
(XEN) Found 1 MBR signatures
(XEN) Found 1 EDD information structures
(XEN) Xen-e820 RAM map:
(XEN) 0000000000000000 - 000000000009ec00 (usable)
(XEN) 00000000000f0000 - 0000000000100000 (reserved)
(XEN) 0000000000100000 - 00000000cfdff800 (usable)
(XEN) 00000000cfdff800 - 00000000cfe53c00 (ACPI NVS)
(XEN) 00000000cfe53c00 - 00000000cfe55c00 (ACPI data)
(XEN) 00000000cfe55c00 - 00000000d0000000 (reserved)
(XEN) 00000000e0000000 - 00000000f0000000 (reserved)
(XEN) 00000000fec00000 - 00000000fed00400 (reserved)
(XEN) 00000000fed20000 - 00000000feda0000 (reserved)
(XEN) 00000000fee00000 - 00000000fef00000 (reserved)
(XEN) 00000000ffb00000 - 0000000100000000 (reserved)
(XEN) 0000000100000000 - 0000000128000000 (usable)
(XEN) System RAM: 3965MB (4060788kB)
(XEN) ACPI: RSDP 000FEC00, 0024 (r2 DELL )
(XEN) ACPI: XSDT 000FC5B3, 008C (r1 DELL B9K 15 ASL 61)
(XEN) ACPI: FACP 000FC6E3, 00F4 (r3 DELL B9K 15 ASL 61)
(XEN) ACPI: DSDT FFF76B39, 4596 (r1 DELL dt_ex 1000 INTL 20050624)
(XEN) ACPI: FACS CFDFF800, 0040
(XEN) ACPI: SSDT FFF7B1EE, 00AA (r1 DELL st_ex 1000 INTL 20050624)
(XEN) ACPI: APIC 000FC7D7, 0092 (r1 DELL B9K 15 ASL 61)
(XEN) ACPI: BOOT 000FC869, 0028 (r1 DELL B9K 15 ASL 61)
(XEN) ACPI: ASF! 000FC891, 0096 (r32 DELL B9K 15 ASL 61)
(XEN) ACPI: MCFG 000FC927, 003E (r1 DELL B9K 15 ASL 61)
(XEN) ACPI: HPET 000FC965, 0038 (r1 DELL B9K 15 ASL 61)
(XEN) ACPI: TCPA 000FCBC1, 0032 (r1 DELL B9K 15 ASL 61)
(XEN) ACPI: DMAR 000FCBF3, 00D0 (r1 DELL B9K 15 ASL 61)
(XEN) ACPI: SLIC 000FC99D, 0176 (r1 DELL B9K 15 ASL 61)
(XEN) ACPI: SSDT CFDFF840, 01F9 (r1 DpgPmm Cpu0Ist 11 INTL 20050624)
(XEN) ACPI: SSDT CFDFFC49, 01F9 (r1 DpgPmm Cpu1Ist 11 INTL 20050624)
(XEN) ACPI: SSDT CFE00052, 0140 (r1 DpgPmm CpuPm 10 INTL 20050624)
(XEN) Xen heap: 14MB (14632kB)
(XEN) Domain heap initialised
(XEN) Processor #0 6:15 APIC version 20
(XEN) Processor #1 6:15 APIC version 20
(XEN) IOAPIC[0]: apic_id 8, version 32, address 0xfec00000, GSI 0-23
(XEN) Enabling APIC mode: Flat. Using 1 I/O APICs
(XEN) Using scheduler: SMP Credit Scheduler (credit)
(XEN) Detected 2394.042 MHz processor.
(XEN) HVM: VMX enabled
(XEN) CPU0: Intel(R) Core(TM)2 CPU 6600 @ 2.40GHz stepping 06
(XEN) Booting processor 1/1 eip 8c000
(XEN) CPU1: Intel(R) Core(TM)2 CPU 6600 @ 2.40GHz stepping 06
(XEN) Total of 2 processors activated.
(XEN) ENABLING IO-APIC IRQs
(XEN) -> Using new ACK method
(XEN) checking TSC synchronization across 2 CPUs: passed.
(XEN) Platform timer is 14.318MHz HPET
(XEN) Brought up 2 CPUs
(XEN) I/O virtualisation disabled
(XEN) *** LOADING DOMAIN 0 ***
(XEN) Xen kernel: 64-bit, lsb, compat32
(XEN) Dom0 kernel: 64-bit, PAE, lsb, paddr 0x200000 -> 0x777e68
(XEN) PHYSICAL MEMORY ARRANGEMENT:
(XEN) Dom0 alloc.: 0000000123000000->0000000124000000 (958126 pages
to be allocated)
(XEN) VIRTUAL MEMORY ARRANGEMENT:
(XEN) Loaded kernel: ffffffff80200000->ffffffff80777e68
(XEN) Init. ramdisk: ffffffff80778000->ffffffff80778000
(XEN) Phys-Mach map: ffffffff80778000->ffffffff80ecf570
(XEN) Start info: ffffffff80ed0000->ffffffff80ed04a4
(XEN) Page tables: ffffffff80ed1000->ffffffff80edc000
(XEN) Boot stack: ffffffff80edc000->ffffffff80edd000
(XEN) TOTAL: ffffffff80000000->ffffffff81000000
(XEN) ENTRY ADDRESS: ffffffff8064f200
(XEN) Dom0 has maximum 2 VCPUs
(XEN) Scrubbing Free RAM: .done.
(XEN) Xen trace buffers: disabled
(XEN) Std. Loglevel: Errors and warnings
(XEN) Guest Loglevel: Nothing (Rate-limited: Errors and warnings)
(XEN) Xen is relinquishing VGA console.
(XEN) *** Serial input -> DOM0 (type 'CTRL-a' three times to switch
input to Xen)
(XEN) Freed 108kB init memory.
mapping kernel into physical memory
Xen: setup ISA identity maps
about to get started...
PAT disabled on Xen
Linux version 2.6.28-rc6-tip (root@optiplex755) (gcc version 4.1.2
(Gentoo 4.1.2 p1.0.2)) #2 SMP Wed Dec 3 15:24:08 GMT 2008
Command line: root=/dev/sda2 console=hvc0 earlyprintk=xen
KERNEL supported cpus:
Intel GenuineIntel
AMD AuthenticAMD
Centaur CentaurHauls
BIOS-provided physical RAM map:
Xen: 0000000000000000 - 00000000000a0000 (usable)
Xen: 00000000000a0000 - 0000000000100000 (reserved)
Xen: 0000000000100000 - 0000000000778000 (usable)
Xen: 0000000000778000 - 0000000000ed1000 (reserved)
Xen: 0000000000ed1000 - 00000000eaeae000 (usable)
console [xenboot0] enabled
DMI 2.5 present.
last_pfn = 0xeaeae max_arch_pfn = 0x3ffffffff
init_memory_mapping: 0000000000000000-00000000eaeae000
last_map_addr: eaeae000 end: eaeae000
ACPI: RSDP 000FEC00, 0024 (r2 DELL )
ACPI: XSDT 000FC5B3, 008C (r1 DELL B9K 15 ASL 61)
ACPI: FACP 000FC6E3, 00F4 (r3 DELL B9K 15 ASL 61)
ACPI: DSDT FFF76B39, 4596 (r1 DELL dt_ex 1000 INTL 20050624)
ACPI: FACS CFDFF800, 0040
ACPI: SSDT FFF7B1EE, 00AA (r1 DELL st_ex 1000 INTL 20050624)
ACPI: APIC 000FC7D7, 0092 (r1 DELL B9K 15 ASL 61)
ACPI: BOOT 000FC869, 0028 (r1 DELL B9K 15 ASL 61)
ACPI: ASF! 000FC891, 0096 (r32 DELL B9K 15 ASL 61)
ACPI: MCFG 000FC927, 003E (r1 DELL B9K 15 ASL 61)
ACPI: HPET 000FC965, 0038 (r1 DELL B9K 15 ASL 61)
ACPI: TCPA 000FCBC1, 0032 (r1 DELL B9K 15 ASL 61)
ACPI: DMAR 000FCBF3, 00D0 (r1 DELL B9K 15 ASL 61)
ACPI: SLIC 000FC99D, 0176 (r1 DELL B9K 15 ASL 61)
ACPI: SSDT CFDFF840, 01F9 (r1 DpgPmm Cpu0Ist 11 INTL 20050624)
ACPI: SSDT CFDFFC49, 01F9 (r1 DpgPmm Cpu1Ist 11 INTL 20050624)
ACPI: SSDT CFE00052, 0140 (r1 DpgPmm CpuPm 10 INTL 20050624)
ACPI: DMI detected: Dell OptiPlex 755
(5 early reservations) ==> bootmem [0000000000 - 00eaeae000]
#0 [0000000000 - 0000001000] BIOS data page ==> [0000000000 - 0000001000]
#1 [0000006000 - 0000008000] TRAMPOLINE ==> [0000006000 - 0000008000]
#2 [0000ed1000 - 0000edc000] XEN PAGETABLES ==> [0000ed1000 - 0000edc000]
#3 [0000200000 - 0000777e68] TEXT DATA BSS ==> [0000200000 - 0000777e68]
#4 [0000edc000 - 000162b000] PGTABLE ==> [0000edc000 - 000162b000]
found SMP MP-table at [ffff8800000fe710] 000fe710
Zone PFN ranges:
DMA 0x00000000 -> 0x00001000
DMA32 0x00001000 -> 0x00100000
Normal 0x00100000 -> 0x00100000
Movable zone start PFN for each node
early_node_map[3] active PFN ranges
0: 0x00000000 -> 0x000000a0
0: 0x00000100 -> 0x00000778
0: 0x00000ed1 -> 0x000eaeae
ACPI: PM-Timer IO Port: 0x808
ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled)
ACPI: LAPIC (acpi_id[0x03] lapic_id[0x05] disabled)
ACPI: LAPIC (acpi_id[0x04] lapic_id[0x07] disabled)
ACPI: LAPIC (acpi_id[0x05] lapic_id[0x00] disabled)
ACPI: LAPIC (acpi_id[0x06] lapic_id[0x01] disabled)
ACPI: LAPIC (acpi_id[0x07] lapic_id[0x02] disabled)
ACPI: LAPIC (acpi_id[0x08] lapic_id[0x03] disabled)
ACPI: LAPIC_NMI (acpi_id[0xff] high level lint[0x1])
ACPI: IOAPIC (id[0x08] address[0xfec00000] gsi_base[0])
IOAPIC[0]: apic_id 8, version 0, address 0xfec00000, GSI 0-23
ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
ACPI: HPET id: 0x8086a301 base: 0xfed00000
Using ACPI (MADT) for SMP configuration information
SMP: Allowing 2 CPUs, 0 hotplug CPUs
(XEN) ioapic_guest_write: apic=0, pin=2, old_irq=0, new_irq=-1
(XEN) ioapic_guest_write: old_entry=000009f0, new_entry=00010900
(XEN) ioapic_guest_write: Attempt to remove IO-APIC pin of in-use IRQ!
(XEN) ioapic_guest_write: apic=0, pin=4, old_irq=4, new_irq=-1
(XEN) ioapic_guest_write: old_entry=000009f1, new_entry=00010900
(XEN) ioapic_guest_write: Attempt to remove IO-APIC pin of in-use IRQ!
Allocating PCI resources starting at ec000000 (gap: eaeae000:15152000)
PERCPU: Allocating 57344 bytes of per cpu data
Built 1 zonelists in Zone order, mobility grouping on. Total pages: 945674
Kernel command line: root=/dev/sda2 console=hvc0 earlyprintk=xen
Initializing CPU#0
xen: allocated irq 9 for acpi 9
PID hash table entries: 4096 (order: 12, 32768 bytes)
Detected 2394.042 MHz processor.
Console: colour dummy device 80x25
console handover: boot [xenboot0] -> real [hvc0]
Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes)
Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes)
Checking aperture...
No AGP bridge found
PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
Placing software IO TLB between 0x51ca000 - 0x91ca000
Memory: 3701108k/3848888k available (2519k kernel code, 7908k absent,
139388k reserved, 1546k data, 420k init)
installing Xen timer for CPU 0
Calibrating delay loop (skipped), value calculated using timer
frequency.. 4788.08 BogoMIPS (lpj=9576168)
Mount-cache hash table entries: 256
CPU: L1 I cache: 32K, L1 D cache: 32K
CPU: L2 cache: 4096K
CPU: Physical Processor ID: 0
CPU: Processor Core ID: 0
SMP alternatives: switching to UP code
ACPI: Core revision 20080926
cpu 0 spinlock event irq 17
installing Xen timer for CPU 1
cpu 1 spinlock event irq 23
SMP alternatives: switching to SMP code
Initializing CPU#1
CPU: L1 I cache: 32K, L1 D cache: 32K
CPU: L2 cache: 4096K
CPU: Physical Processor ID: 0
CPU: Processor Core ID: 0
Brought up 2 CPUs
net_namespace: 552 bytes
Booting paravirtualized kernel on Xen
Xen version: 3.3.0 (preserve-AD) (dom0)
Grant table initialized
NET: Registered protocol family 16
xenbus_probe_init ok
ACPI FADT declares the system doesn't support PCIe ASPM, so disable it
ACPI: bus type pci registered
PCI: Using configuration type 1 for base access
ACPI: Interpreter enabled
ACPI: (supports S0 S5)
ACPI: Using IOAPIC for interrupt routing
ACPI: ACPI Dock Station Driver: 1 docks/bays found
ACPI: PCI Root Bridge [PCI0] (0000:00)
pci 0000:00:01.0: PME# supported from D0 D3hot D3cold
pci 0000:00:01.0: PME# disabled
pci 0000:00:03.0: PME# supported from D0 D3hot D3cold
pci 0000:00:03.0: PME# disabled
pci 0000:00:19.0: PME# supported from D0 D3hot D3cold
pci 0000:00:19.0: PME# disabled
pci 0000:00:1a.7: PME# supported from D0 D3hot D3cold
pci 0000:00:1a.7: PME# disabled
pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1b.0: PME# disabled
pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.0: PME# disabled
pci 0000:00:1d.7: PME# supported from D0 D3hot D3cold
pci 0000:00:1d.7: PME# disabled
pci 0000:00:1f.0: quirk: region 0800-087f claimed by ICH6 ACPI/GPIO/TCO
pci 0000:00:1f.0: quirk: region 0880-08bf claimed by ICH6 GPIO
pci 0000:00:1f.2: PME# supported from D3hot
pci 0000:00:1f.2: PME# disabled
pci 0000:00:1e.0: transparent bridge
ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 9 10 *11 12 15)
ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 *5 6 7 9 10 11 12 15)
ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 7 *9 10 11 12 15)
ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 9 *10 11 12 15)
ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 9 10 11 12 15) *0, disabled.
ACPI: PCI Interrupt Link [LNKF] (IRQs *3 4 5 6 7 9 10 11 12 15)
ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 *5 6 7 9 10 11 12 15)
ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 7 9 *10 11 12 15)
ACPI Warning (tbutils-0217): Incorrect checksum in table [TCPA] - 00,
should be 87 [20080926]
xen_balloon: Initialising balloon driver.
SCSI subsystem initialized
PCI: Using ACPI for IRQ routing
pci 0000:00:01.0: BAR 9: can't allocate resource
pci 0000:01:00.0: BAR 0: can't allocate resource
Xen: Initializing Xen DMA ops
Xen: Enabling DMA fallback to swiotlb
PCI-GART: No AMD GART found.
pnp: PnP ACPI init
ACPI: bus type pnp registered
pnp 00:01: io resource (0x800-0x85f) overlaps 0000:00:1f.0 BAR 7
(0x800-0x87f), disabling
pnp 00:01: io resource (0x860-0x8ff) overlaps 0000:00:1f.0 BAR 7
(0x800-0x87f), disabling
system 00:01: ioport range 0xc00-0xc7f has been reserved
xen_set_ioapic_routing: irq 13 gsi 13 vector 120 ioapic 0 pin 13
triggering 1 polarity 0
xen_set_ioapic_routing: irq 8 gsi 8 vector 80 ioapic 0 pin 8
triggering 1 polarity 0
xen_set_ioapic_routing: irq 7 gsi 7 vector 72 ioapic 0 pin 7
triggering 1 polarity 0
xen_set_ioapic_routing: irq 4 gsi 4 vector 241 ioapic 0 pin 4
triggering 1 polarity 0
(XEN) ioapic_guest_write: apic=0, pin=4, old_irq=4, new_irq=4
(XEN) ioapic_guest_write: old_entry=000009f1, new_entry=000189f1
(XEN) ioapic_guest_write: Attempt to modify IO-APIC pin for in-use IRQ!
pnp: PnP ACPI: found 9 devices
ACPI: ACPI bus type pnp unregistered
pci 0000:00:01.0: PCI bridge, secondary bus 0000:01
pci 0000:00:01.0: IO window: 0xd000-0xdfff
pci 0000:00:01.0: MEM window: 0xfe900000-0xfeafffff
pci 0000:00:01.0: PREFETCH window: 0x00000100000000-0x0000010fffffff
pci 0000:00:1c.0: PCI bridge, secondary bus 0000:02
pci 0000:00:1c.0: IO window: disabled
pci 0000:00:1c.0: MEM window: 0xfe800000-0xfe8fffff
pci 0000:00:1c.0: PREFETCH window: disabled
pci 0000:00:1e.0: PCI bridge, secondary bus 0000:03
pci 0000:00:1e.0: IO window: disabled
pci 0000:00:1e.0: MEM window: disabled
pci 0000:00:1e.0: PREFETCH window: disabled
xen_set_ioapic_routing: irq 29 gsi 16 vector 152 ioapic 0 pin 16
triggering 0 polarity 1
pci 0000:00:01.0: PCI INT A -> GSI 16 (level, low) -> IRQ 29
xen: PCI device 0000:00:01.0 pin 1 -> irq 29
xen_allocate_pirq: returning irq 29 for gsi 16
xen_set_ioapic_routing: irq 29 gsi 16 vector 152 ioapic 0 pin 16
triggering 0 polarity 1
pci 0000:00:1c.0: PCI INT A -> GSI 16 (level, low) -> IRQ 29
xen: PCI device 0000:00:1c.0 pin 1 -> irq 29
bus: 00 index 0 io port: [0x00-0xffff]
bus: 00 index 1 mmio: [0x000000-0xffffffffffffffff]
bus: 01 index 0 io port: [0xd000-0xdfff]
bus: 01 index 1 mmio: [0xfe900000-0xfeafffff]
bus: 01 index 2 mmio: [0x100000000-0x10fffffff]
bus: 01 index 3 mmio: [0x0-0x0]
bus: 02 index 0 mmio: [0x0-0x0]
bus: 02 index 1 mmio: [0xfe800000-0xfe8fffff]
bus: 02 index 2 mmio: [0x0-0x0]
bus: 02 index 3 mmio: [0x0-0x0]
bus: 03 index 0 mmio: [0x0-0x0]
bus: 03 index 1 mmio: [0x0-0x0]
bus: 03 index 2 mmio: [0x0-0x0]
bus: 03 index 3 io port: [0x00-0xffff]
bus: 03 index 4 mmio: [0x000000-0xffffffffffffffff]
NET: Registered protocol family 2
IP route cache hash table entries: 131072 (order: 8, 1048576 bytes)
TCP established hash table entries: 262144 (order: 10, 4194304 bytes)
TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
TCP: Hash tables configured (established 262144 bind 65536)
TCP reno registered
NET: Registered protocol family 1
Simple Boot Flag at 0x7a set to 0x1
Installing knfsd (copyright (C) 1996 okir@monad.swb.de).
msgmni has been set to 7517
io scheduler noop registered
io scheduler cfq registered (default)
pcieport-driver 0000:00:01.0: found MSI capability
pcieport-driver 0000:00:1c.0: found MSI capability
input: Power Button (FF) as /class/input/input0
ACPI: Power Button (FF) [PWRF]
input: Power Button (CM) as /class/input/input1
ACPI: Power Button (CM) [VBTN]
xenbus_probe_backend_init bus registered ok
xenbus_probe_frontend_init bus registered ok
Event-channel device installed.
***blkif_init
Real Time Clock Driver v1.12ac
Linux agpgart interface v0.103
floppy0: Unable to grab IRQ6 for the floppy driver
brd: module loaded
loop: module loaded
tun: Universal TUN/TAP device driver, 1.6
tun: (C) 1999-2004 Max Krasnyansky <maxk@qualcomm.com>
console [netcon0] enabled
netconsole: network logging started
Driver 'sd' needs updating - please use bus_type methods
Driver 'sr' needs updating - please use bus_type methods
xen_set_ioapic_routing: irq 31 gsi 18 vector 160 ioapic 0 pin 18
triggering 0 polarity 1
ahci 0000:00:1f.2: PCI INT C -> GSI 18 (level, low) -> IRQ 31
xen: PCI device 0000:00:1f.2 pin 3 -> irq 31
ahci 0000:00:1f.2: AHCI 0001.0200 32 slots 6 ports 3 Gbps 0x27 impl SATA mode
ahci 0000:00:1f.2: flags: 64bit ncq sntf pm led clo pmp pio slum part ems
(XEN) unexpected IRQ trap at vector 59
(XEN) unexpected IRQ trap at vector 59
scsi0 : ahci
scsi1 : ahci
scsi2 : ahci
scsi3 : ahci
scsi4 : ahci
scsi5 : ahci
ata1: SATA max UDMA/133 abar m2048@0xff970000 port 0xff970100 irq 1277
ata2: SATA max UDMA/133 abar m2048@0xff970000 port 0xff970180 irq 1277
ata3: SATA max UDMA/133 abar m2048@0xff970000 port 0xff970200 irq 1277
ata4: DUMMY
ata5: DUMMY
ata6: SATA max UDMA/133 abar m2048@0xff970000 port 0xff970380 irq 1277
(XEN) unexpected IRQ trap at vector 59
ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
(XEN) unexpected IRQ trap at vector 59
ata1.00: qc timeout (cmd 0xec)
ata1.00: failed to IDENTIFY (I/O error, err_mask=0x4)
(XEN) unexpected IRQ trap at vector 59
ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
(XEN) unexpected IRQ trap at vector 59
ata1.00: qc timeout (cmd 0xec)
ata1.00: failed to IDENTIFY (I/O error, err_mask=0x4)
(XEN) unexpected IRQ trap at vector 59
ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
(XEN) unexpected IRQ trap at vector 59
ata1.00: qc timeout (cmd 0xec)
ata1.00: failed to IDENTIFY (I/O error, err_mask=0x4)
(XEN) unexpected IRQ trap at vector 59
ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
(XEN) unexpected IRQ trap at vector 59
ata2.00: qc timeout (cmd 0xa1)
ata2.00: failed to IDENTIFY (I/O error, err_mask=0x4)
ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
(XEN) unexpected IRQ trap at vector 59
ata2.00: qc timeout (cmd 0xa1)
ata2.00: failed to IDENTIFY (I/O error, err_mask=0x4)
ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
(XEN) unexpected IRQ trap at vector 59
ata2.00: qc timeout (cmd 0xa1)
ata2.00: failed to IDENTIFY (I/O error, err_mask=0x4)
ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
ata3: SATA link down (SStatus 4 SControl 300)
ata6: SATA link down (SStatus 4 SControl 300)
PNP: No PS/2 controller found. Probing ports directly.
i8042: probe of i8042 failed with error -38
mice: PS/2 mouse device common for all mice
device-mapper: ioctl: 4.14.0-ioctl (2008-04-23) initialised: dm-devel@redhat.com
cpuidle: using governor ladder
TCP cubic registered
NET: Registered protocol family 17
RPC: Registered udp transport module.
RPC: Registered tcp transport module.
IO APIC resources could be not be allocated.
Root-NFS: No NFS server available, giving up.
VFS: Unable to mount root fs via NFS, trying floppy.
VFS: Insert root floppy and press ENTER
Andy
Looks like it is not detecting the drive correctly.
What is your specific controller?
Cheers,
Todd
--
Todd Deshane
http://todddeshane.net
http://runningxen.com
_______________________________________________
Xen-devel mailing list
Xen-devel@lists.xensource.com
http://lists.xensource.com/xen-devel
[-- Attachment #1.2: Type: text/html, Size: 28256 bytes --]
[-- Attachment #2: Type: text/plain, Size: 138 bytes --]
_______________________________________________
Xen-devel mailing list
Xen-devel@lists.xensource.com
http://lists.xensource.com/xen-devel
^ permalink raw reply [flat|nested] 22+ messages in thread
* Re: pv_ops dom0 testing
2008-12-03 17:10 ` Andrew Lyon
@ 2008-12-03 17:49 ` Boris Derzhavets
2008-12-03 18:03 ` Andrew Lyon
0 siblings, 1 reply; 22+ messages in thread
From: Boris Derzhavets @ 2008-12-03 17:49 UTC (permalink / raw)
To: deshantm, Andrew Lyon; +Cc: Jeremy Fitzhardinge, xen-devel
[-- Attachment #1.1: Type: text/plain, Size: 24106 bytes --]
--- On Wed, 12/3/08, Andrew Lyon <andrew.lyon@gmail.com> wrote:
From: Andrew Lyon <andrew.lyon@gmail.com>
Subject: Re: [Xen-devel] pv_ops dom0 testing
To: deshantm@gmail.com
Cc: "Jeremy Fitzhardinge" <jeremy@goop.org>, xen-devel@lists.xensource.com
Date: Wednesday, December 3, 2008, 12:10 PM
On Wed, Dec 3, 2008 at 4:43 PM, Todd Deshane <deshantm@gmail.com> wrote:
>
>
>> I had the system setup to output to serial and vga console
>> (console=vga,com1) but it seems that the vga console only displays Xen
>> debug messages,
>
> Here is my grub debug setup for reference
>
> title Xen 3.4-unstable DEBUG/ Ubuntu 8.10, kernel 2.6.28-rc6-tip
> root (hd0,0)
> kernel /boot/xen-3.4-unstable.gz loglvl=all guest_loglvl=all
> com1=115200,8n1 console=com1 mem=3G
> module /boot/vmlinuz-2.6.28-rc6-tip root=/dev/sda1 ro
console=hvc0
> earlyprintk=xen xencons=ttyS0,115200 nousb
> module /boot/initrd.img-2.6.28-rc6-tip
>
>
>>
>> I hooked up a null modem cable and I've now captured
>> the full xen and linux dmesg, it appears that the onboard intel ahci
>> sata is not working so the kernel is unable to run init:
>>
>> __ __ _____ _____ ___
>>
>> \ \/ /___ _ __ |___ / |___ / / _ \
>>
>> \ // _ \ '_ \ |_ \ |_ \| | | |
>>
>> / \ __/ | | | ___) | ___) | |_| |
>>
>> /_/\_\___|_| |_| |____(_)____(_)___/
>>
>>
>>
>> (XEN) Xen version 3.3.0 (root@(none)) (gcc version 4.1.2 (Gentoo 4.1.2
>> p1.0.2)) Tue Dec 2 15:55:55 GMT 2008
>>
>> (XEN) Latest ChangeSet: unavailable
>>
>> (XEN) Command line: com1=115200,8n1 console=vga,com1
>>
>> (XEN) Video information:
>>
>> (XEN) VGA is text mode 80x25, font 8x16
>>
>> (XEN) VBE/DDC methods: V2; EDID transfer time: 1 seconds
>>
>> (XEN) Disc information:
>>
>> (XEN) Found 1 MBR signatures
>>
>> (XEN) Found 1 EDD information structures
>>
>> (XEN) Xen-e820 RAM map:
>>
>> (XEN) 0000000000000000 - 000000000009ec00 (usable)
>>
>> (XEN) 00000000000f0000 - 0000000000100000 (reserved)
>>
>> (XEN) 0000000000100000 - 00000000cfdff800 (usable)
>>
>> (XEN) 00000000cfdff800 - 00000000cfe53c00 (ACPI NVS)
>>
>> (XEN) 00000000cfe53c00 - 00000000cfe55c00 (ACPI data)
>>
>> (XEN) 00000000cfe55c00 - 00000000d0000000 (reserved)
>>
>> (XEN) 00000000e0000000 - 00000000f0000000 (reserved)
>>
>> (XEN) 00000000fec00000 - 00000000fed00400 (reserved)
>>
>> (XEN) 00000000fed20000 - 00000000feda0000 (reserved)
>>
>> (XEN) 00000000fee00000 - 00000000fef00000 (reserved)
>>
>> (XEN) 00000000ffb00000 - 0000000100000000 (reserved)
>>
>> (XEN) 0000000100000000 - 0000000128000000 (usable)
>>
>> (XEN) System RAM: 3965MB (4060788kB)
>>
>> (XEN) ACPI: RSDP 000FEC00, 0024 (r2 DELL )
>>
>> (XEN) ACPI: XSDT 000FC5B3, 008C (r1 DELL B9K 15 ASL
>> 61)
>>
>> (XEN) ACPI: FACP 000FC6E3, 00F4 (r3 DELL B9K 15 ASL
>> 61)
>>
>> (XEN) ACPI: DSDT FFF76B39, 4596 (r1 DELL dt_ex 1000 INTL
>> 20050624)
>>
>> (XEN) ACPI: FACS CFDFF800, 0040
>>
>> (XEN) ACPI: SSDT FFF7B1EE, 00AA (r1 DELL st_ex 1000 INTL
>> 20050624)
>>
>> (XEN) ACPI: APIC 000FC7D7, 0092 (r1 DELL B9K 15 ASL
>> 61)
>>
>> (XEN) ACPI: BOOT 000FC869, 0028 (r1 DELL B9K 15 ASL
>> 61)
>>
>> (XEN) ACPI: ASF! 000FC891, 0096 (r32 DELL B9K 15 ASL
>> 61)
>>
>> (XEN) ACPI: MCFG 000FC927, 003E (r1 DELL B9K 15 ASL
>> 61)
>>
>> (XEN) ACPI: HPET 000FC965, 0038 (r1 DELL B9K 15 ASL
>> 61)
>>
>> (XEN) ACPI: TCPA 000FCBC1, 0032 (r1 DELL B9K 15 ASL
>> 61)
>>
>> (XEN) ACPI: DMAR 000FCBF3, 00D0 (r1 DELL B9K 15 ASL
>> 61)
>>
>> (XEN) ACPI: SLIC 000FC99D, 0176 (r1 DELL B9K 15 ASL
>> 61)
>>
>> (XEN) ACPI: SSDT CFDFF840, 01F9 (r1 DpgPmm Cpu0Ist 11 INTL
>> 20050624)
>>
>> (XEN) ACPI: SSDT CFDFFC49, 01F9 (r1 DpgPmm Cpu1Ist 11 INTL
>> 20050624)
>>
>> (XEN) ACPI: SSDT CFE00052, 0140 (r1 DpgPmm CpuPm 10 INTL
>> 20050624)
>>
>> (XEN) Xen heap: 14MB (14632kB)
>>
>> (XEN) Domain heap initialised
>>
>> (XEN) Processor #0 6:15 APIC version 20
>>
>> (XEN) Processor #1 6:15 APIC version 20
>>
>> (XEN) IOAPIC[0]: apic_id 8, version 32, address 0xfec00000, GSI 0-23
>>
>> (XEN) Enabling APIC mode: Flat. Using 1 I/O APICs
>>
>> (XEN) Using scheduler: SMP Credit Scheduler (credit)
>>
>> (XEN) Detected 2394.042 MHz processor.
>>
>> (XEN) HVM: VMX enabled
>>
>> (XEN) CPU0: Intel(R) Core(TM)2 CPU 6600 @ 2.40GHz stepping
06
>>
>> (XEN) Booting processor 1/1 eip 8c000
>>
>> (XEN) CPU1: Intel(R) Core(TM)2 CPU 6600 @ 2.40GHz stepping
06
>>
>> (XEN) Total of 2 processors activated.
>>
>> (XEN) ENABLING IO-APIC IRQs
>>
>> (XEN) -> Using new ACK method
>>
>> (XEN) checking TSC synchronization across 2 CPUs: passed.
>>
>> (XEN) Platform timer is 14.318MHz HPET
>>
>> (XEN) Brought up 2 CPUs
>>
>> (XEN) I/O virtualisation disabled
>>
>> (XEN) *** LOADING DOMAIN 0 ***
>>
>> (XEN) Xen kernel: 64-bit, lsb, compat32
>>
>> (XEN) Dom0 kernel: 64-bit, PAE, lsb, paddr 0x200000 -> 0x777e68
>>
>> (XEN) PHYSICAL MEMORY ARRANGEMENT:
>>
>> (XEN) Dom0 alloc.: 0000000123000000->0000000124000000 (958126
pages
>> to be allocated)
>>
>> (XEN) VIRTUAL MEMORY ARRANGEMENT:
>>
>> (XEN) Loaded kernel: ffffffff80200000->ffffffff80777e68
>>
>> (XEN) Init. ramdisk: ffffffff80778000->ffffffff80778000
>>
>> (XEN) Phys-Mach map: ffffffff80778000->ffffffff80ecf570
>>
>> (XEN) Start info: ffffffff80ed0000->ffffffff80ed04a4
>>
>> (XEN) Page tables: ffffffff80ed1000->ffffffff80edc000
>>
>> (XEN) Boot stack: ffffffff80edc000->ffffffff80edd000
>>
>> (XEN) TOTAL: ffffffff80000000->ffffffff81000000
>>
>> (XEN) ENTRY ADDRESS: ffffffff8064f200
>>
>> (XEN) Dom0 has maximum 2 VCPUs
>>
>> (XEN) Scrubbing Free RAM: .done.
>>
>> (XEN) Xen trace buffers: disabled
>>
>> (XEN) Std. Loglevel: Errors and warnings
>>
>> (XEN) Guest Loglevel: Nothing (Rate-limited: Errors and warnings)
>>
>> (XEN) Xen is relinquishing VGA console.
>>
>> (XEN) *** Serial input -> DOM0 (type 'CTRL-a' three times
to switch
>> input to Xen)
>>
>> (XEN) Freed 108kB init memory.
>>
>> mapping kernel into physical memory
>>
>> Xen: setup ISA identity maps
>>
>> about to get started...
>>
>> PAT disabled on Xen
>>
>> Linux version 2.6.28-rc6-tip (root@optiplex755) (gcc version 4.1.2
>> (Gentoo 4.1.2 p1.0.2)) #2 SMP Wed Dec 3 15:24:08 GMT 2008
>>
>> Command line: root=/dev/sda2 console=hvc0 earlyprintk=xen
>>
>> KERNEL supported cpus:
>>
>> Intel GenuineIntel
>>
>> AMD AuthenticAMD
>>
>> Centaur CentaurHauls
>>
>> BIOS-provided physical RAM map:
>>
>> Xen: 0000000000000000 - 00000000000a0000 (usable)
>>
>> Xen: 00000000000a0000 - 0000000000100000 (reserved)
>>
>> Xen: 0000000000100000 - 0000000000778000 (usable)
>>
>> Xen: 0000000000778000 - 0000000000ed1000 (reserved)
>>
>> Xen: 0000000000ed1000 - 00000000eaeae000 (usable)
>>
>> console [xenboot0] enabled
>>
>> DMI 2.5 present.
>>
>> last_pfn = 0xeaeae max_arch_pfn = 0x3ffffffff
>>
>> init_memory_mapping: 0000000000000000-00000000eaeae000
>>
>> last_map_addr: eaeae000 end: eaeae000
>>
>> ACPI: RSDP 000FEC00, 0024 (r2 DELL )
>>
>> ACPI: XSDT 000FC5B3, 008C (r1 DELL B9K 15 ASL 61)
>>
>> ACPI: FACP 000FC6E3, 00F4 (r3 DELL B9K 15 ASL 61)
>>
>> ACPI: DSDT FFF76B39, 4596 (r1 DELL dt_ex 1000 INTL 20050624)
>>
>> ACPI: FACS CFDFF800, 0040
>>
>> ACPI: SSDT FFF7B1EE, 00AA (r1 DELL st_ex 1000 INTL 20050624)
>>
>> ACPI: APIC 000FC7D7, 0092 (r1 DELL B9K 15 ASL 61)
>>
>> ACPI: BOOT 000FC869, 0028 (r1 DELL B9K 15 ASL 61)
>>
>> ACPI: ASF! 000FC891, 0096 (r32 DELL B9K 15 ASL 61)
>>
>> ACPI: MCFG 000FC927, 003E (r1 DELL B9K 15 ASL 61)
>>
>> ACPI: HPET 000FC965, 0038 (r1 DELL B9K 15 ASL 61)
>>
>> ACPI: TCPA 000FCBC1, 0032 (r1 DELL B9K 15 ASL 61)
>>
>> ACPI: DMAR 000FCBF3, 00D0 (r1 DELL B9K 15 ASL 61)
>>
>> ACPI: SLIC 000FC99D, 0176 (r1 DELL B9K 15 ASL 61)
>>
>> ACPI: SSDT CFDFF840, 01F9 (r1 DpgPmm Cpu0Ist 11 INTL 20050624)
>>
>> ACPI: SSDT CFDFFC49, 01F9 (r1 DpgPmm Cpu1Ist 11 INTL 20050624)
>>
>> ACPI: SSDT CFE00052, 0140 (r1 DpgPmm CpuPm 10 INTL 20050624)
>>
>> ACPI: DMI detected: Dell OptiPlex 755
>>
>> (5 early reservations) ==> bootmem [0000000000 - 00eaeae000]
>>
>> #0 [0000000000 - 0000001000] BIOS data page ==> [0000000000 -
>> 0000001000]
>>
>> #1 [0000006000 - 0000008000] TRAMPOLINE ==> [0000006000 -
>> 0000008000]
>>
>> #2 [0000ed1000 - 0000edc000] XEN PAGETABLES ==> [0000ed1000 -
>> 0000edc000]
>>
>> #3 [0000200000 - 0000777e68] TEXT DATA BSS ==> [0000200000 -
>> 0000777e68]
>>
>> #4 [0000edc000 - 000162b000] PGTABLE ==> [0000edc000 -
>> 000162b000]
>>
>> found SMP MP-table at [ffff8800000fe710] 000fe710
>>
>> Zone PFN ranges:
>>
>> DMA 0x00000000 -> 0x00001000
>>
>> DMA32 0x00001000 -> 0x00100000
>>
>> Normal 0x00100000 -> 0x00100000
>>
>> Movable zone start PFN for each node
>>
>> early_node_map[3] active PFN ranges
>>
>> 0: 0x00000000 -> 0x000000a0
>>
>> 0: 0x00000100 -> 0x00000778
>>
>> 0: 0x00000ed1 -> 0x000eaeae
>>
>> ACPI: PM-Timer IO Port: 0x808
>>
>> ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
>>
>> ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled)
>>
>> ACPI: LAPIC (acpi_id[0x03] lapic_id[0x05] disabled)
>>
>> ACPI: LAPIC (acpi_id[0x04] lapic_id[0x07] disabled)
>>
>> ACPI: LAPIC (acpi_id[0x05] lapic_id[0x00] disabled)
>>
>> ACPI: LAPIC (acpi_id[0x06] lapic_id[0x01] disabled)
>>
>> ACPI: LAPIC (acpi_id[0x07] lapic_id[0x02] disabled)
>>
>> ACPI: LAPIC (acpi_id[0x08] lapic_id[0x03] disabled)
>>
>> ACPI: LAPIC_NMI (acpi_id[0xff] high level lint[0x1])
>>
>> ACPI: IOAPIC (id[0x08] address[0xfec00000] gsi_base[0])
>>
>> IOAPIC[0]: apic_id 8, version 0, address 0xfec00000, GSI 0-23
>>
>> ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
>>
>> ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
>>
>> ACPI: HPET id: 0x8086a301 base: 0xfed00000
>>
>> Using ACPI (MADT) for SMP configuration information
>>
>> SMP: Allowing 2 CPUs, 0 hotplug CPUs
>>
>> (XEN) ioapic_guest_write: apic=0, pin=2, old_irq=0, new_irq=-1
>>
>> (XEN) ioapic_guest_write: old_entry=000009f0, new_entry=00010900
>>
>> (XEN) ioapic_guest_write: Attempt to remove IO-APIC pin of in-use IRQ!
>>
>> (XEN) ioapic_guest_write: apic=0, pin=4, old_irq=4, new_irq=-1
>>
>> (XEN) ioapic_guest_write: old_entry=000009f1, new_entry=00010900
>>
>> (XEN) ioapic_guest_write: Attempt to remove IO-APIC pin of in-use IRQ!
>>
>> Allocating PCI resources starting at ec000000 (gap: eaeae000:15152000)
>>
>> PERCPU: Allocating 57344 bytes of per cpu data
>>
>> Built 1 zonelists in Zone order, mobility grouping on. Total pages:
>> 945674
>>
>> Kernel command line: root=/dev/sda2 console=hvc0 earlyprintk=xen
>>
>> Initializing CPU#0
>>
>> xen: allocated irq 9 for acpi 9
>>
>> PID hash table entries: 4096 (order: 12, 32768 bytes)
>>
>> Detected 2394.042 MHz processor.
>>
>> Console: colour dummy device 80x25
>>
>> console handover: boot [xenboot0] -> real [hvc0]
>>
>> Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes)
>>
>> Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes)
>>
>> Checking aperture...
>>
>> No AGP bridge found
>>
>> PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
>>
>> Placing software IO TLB between 0x51ca000 - 0x91ca000
>>
>> Memory: 3701108k/3848888k available (2519k kernel code, 7908k absent,
>> 139388k reserved, 1546k data, 420k init)
>>
>> installing Xen timer for CPU 0
>>
>> Calibrating delay loop (skipped), value calculated using timer
>> frequency.. 4788.08 BogoMIPS (lpj=9576168)
>>
>> Mount-cache hash table entries: 256
>>
>> CPU: L1 I cache: 32K, L1 D cache: 32K
>>
>> CPU: L2 cache: 4096K
>>
>> CPU: Physical Processor ID: 0
>>
>> CPU: Processor Core ID: 0
>>
>> SMP alternatives: switching to UP code
>>
>> ACPI: Core revision 20080926
>>
>> cpu 0 spinlock event irq 17
>>
>> installing Xen timer for CPU 1
>>
>> cpu 1 spinlock event irq 23
>>
>> SMP alternatives: switching to SMP code
>>
>> Initializing CPU#1
>>
>> CPU: L1 I cache: 32K, L1 D cache: 32K
>>
>> CPU: L2 cache: 4096K
>>
>> CPU: Physical Processor ID: 0
>>
>> CPU: Processor Core ID: 0
>>
>> Brought up 2 CPUs
>>
>> net_namespace: 552 bytes
>>
>> Booting paravirtualized kernel on Xen
>>
>> Xen version: 3.3.0 (preserve-AD) (dom0)
>>
>> Grant table initialized
>>
>> NET: Registered protocol family 16
>>
>> xenbus_probe_init ok
>>
>> ACPI FADT declares the system doesn't support PCIe ASPM, so
disable it
>>
>> ACPI: bus type pci registered
>>
>> PCI: Using configuration type 1 for base access
>>
>> ACPI: Interpreter enabled
>>
>> ACPI: (supports S0 S5)
>>
>> ACPI: Using IOAPIC for interrupt routing
>>
>> ACPI: ACPI Dock Station Driver: 1 docks/bays found
>>
>> ACPI: PCI Root Bridge [PCI0] (0000:00)
>>
>> pci 0000:00:01.0: PME# supported from D0 D3hot D3cold
>>
>> pci 0000:00:01.0: PME# disabled
>>
>> pci 0000:00:03.0: PME# supported from D0 D3hot D3cold
>>
>> pci 0000:00:03.0: PME# disabled
>>
>> pci 0000:00:19.0: PME# supported from D0 D3hot D3cold
>>
>> pci 0000:00:19.0: PME# disabled
>>
>> pci 0000:00:1a.7: PME# supported from D0 D3hot D3cold
>>
>> pci 0000:00:1a.7: PME# disabled
>>
>> pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
>>
>> pci 0000:00:1b.0: PME# disabled
>>
>> pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
>>
>> pci 0000:00:1c.0: PME# disabled
>>
>> pci 0000:00:1d.7: PME# supported from D0 D3hot D3cold
>>
>> pci 0000:00:1d.7: PME# disabled
>>
>> pci 0000:00:1f.0: quirk: region 0800-087f claimed by ICH6
ACPI/GPIO/TCO
>>
>> pci 0000:00:1f.0: quirk: region 0880-08bf claimed by ICH6 GPIO
>>
>> pci 0000:00:1f.2: PME# supported from D3hot
>>
>> pci 0000:00:1f.2: PME# disabled
>>
>> pci 0000:00:1e.0: transparent bridge
>>
>> ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 9 10 *11 12 15)
>>
>> ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 *5 6 7 9 10 11 12 15)
>>
>> ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 7 *9 10 11 12 15)
>>
>> ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 9 *10 11 12 15)
>>
>> ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 9 10 11 12 15) *0,
>> disabled.
>>
>> ACPI: PCI Interrupt Link [LNKF] (IRQs *3 4 5 6 7 9 10 11 12 15)
>>
>> ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 *5 6 7 9 10 11 12 15)
>>
>> ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 7 9 *10 11 12 15)
>>
>> ACPI Warning (tbutils-0217): Incorrect checksum in table [TCPA] - 00,
>> should be 87 [20080926]
>>
>> xen_balloon: Initialising balloon driver.
>>
>> SCSI subsystem initialized
>>
>> PCI: Using ACPI for IRQ routing
>>
>> pci 0000:00:01.0: BAR 9: can't allocate resource
>>
>> pci 0000:01:00.0: BAR 0: can't allocate resource
>>
>> Xen: Initializing Xen DMA ops
>>
>> Xen: Enabling DMA fallback to swiotlb
>>
>> PCI-GART: No AMD GART found.
>>
>> pnp: PnP ACPI init
>>
>> ACPI: bus type pnp registered
>>
>> pnp 00:01: io resource (0x800-0x85f) overlaps 0000:00:1f.0 BAR 7
>> (0x800-0x87f), disabling
>>
>> pnp 00:01: io resource (0x860-0x8ff) overlaps 0000:00:1f.0 BAR 7
>> (0x800-0x87f), disabling
>>
>> system 00:01: ioport range 0xc00-0xc7f has been reserved
>>
>> xen_set_ioapic_routing: irq 13 gsi 13 vector 120 ioapic 0 pin 13
>> triggering 1 polarity 0
>>
>> xen_set_ioapic_routing: irq 8 gsi 8 vector 80 ioapic 0 pin 8
>> triggering 1 polarity 0
>>
>> xen_set_ioapic_routing: irq 7 gsi 7 vector 72 ioapic 0 pin 7
>> triggering 1 polarity 0
>>
>> xen_set_ioapic_routing: irq 4 gsi 4 vector 241 ioapic 0 pin 4
>> triggering 1 polarity 0
>>
>> (XEN) ioapic_guest_write: apic=0, pin=4, old_irq=4, new_irq=4
>>
>> (XEN) ioapic_guest_write: old_entry=000009f1, new_entry=000189f1
>>
>> (XEN) ioapic_guest_write: Attempt to modify IO-APIC pin for in-use
IRQ!
>>
>> pnp: PnP ACPI: found 9 devices
>>
>> ACPI: ACPI bus type pnp unregistered
>>
>> pci 0000:00:01.0: PCI bridge, secondary bus 0000:01
>>
>> pci 0000:00:01.0: IO window: 0xd000-0xdfff
>>
>> pci 0000:00:01.0: MEM window: 0xfe900000-0xfeafffff
>>
>> pci 0000:00:01.0: PREFETCH window: 0x00000100000000-0x0000010fffffff
>>
>> pci 0000:00:1c.0: PCI bridge, secondary bus 0000:02
>>
>> pci 0000:00:1c.0: IO window: disabled
>>
>> pci 0000:00:1c.0: MEM window: 0xfe800000-0xfe8fffff
>>
>> pci 0000:00:1c.0: PREFETCH window: disabled
>>
>> pci 0000:00:1e.0: PCI bridge, secondary bus 0000:03
>>
>> pci 0000:00:1e.0: IO window: disabled
>>
>> pci 0000:00:1e.0: MEM window: disabled
>>
>> pci 0000:00:1e.0: PREFETCH window: disabled
>>
>> xen_set_ioapic_routing: irq 29 gsi 16 vector 152 ioapic 0 pin 16
>> triggering 0 polarity 1
>>
>> pci 0000:00:01.0: PCI INT A -> GSI 16 (level, low) -> IRQ 29
>>
>> xen: PCI device 0000:00:01.0 pin 1 -> irq 29
>>
>> xen_allocate_pirq: returning irq 29 for gsi 16
>>
>> xen_set_ioapic_routing: irq 29 gsi 16 vector 152 ioapic 0 pin 16
>> triggering 0 polarity 1
>>
>> pci 0000:00:1c.0: PCI INT A -> GSI 16 (level, low) -> IRQ 29
>>
>> xen: PCI device 0000:00:1c.0 pin 1 -> irq 29
>>
>> bus: 00 index 0 io port: [0x00-0xffff]
>>
>> bus: 00 index 1 mmio: [0x000000-0xffffffffffffffff]
>>
>> bus: 01 index 0 io port: [0xd000-0xdfff]
>>
>> bus: 01 index 1 mmio: [0xfe900000-0xfeafffff]
>>
>> bus: 01 index 2 mmio: [0x100000000-0x10fffffff]
>>
>> bus: 01 index 3 mmio: [0x0-0x0]
>>
>> bus: 02 index 0 mmio: [0x0-0x0]
>>
>> bus: 02 index 1 mmio: [0xfe800000-0xfe8fffff]
>>
>> bus: 02 index 2 mmio: [0x0-0x0]
>>
>> bus: 02 index 3 mmio: [0x0-0x0]
>>
>> bus: 03 index 0 mmio: [0x0-0x0]
>>
>> bus: 03 index 1 mmio: [0x0-0x0]
>>
>> bus: 03 index 2 mmio: [0x0-0x0]
>>
>> bus: 03 index 3 io port: [0x00-0xffff]
>>
>> bus: 03 index 4 mmio: [0x000000-0xffffffffffffffff]
>>
>> NET: Registered protocol family 2
>>
>> IP route cache hash table entries: 131072 (order: 8, 1048576 bytes)
>>
>> TCP established hash table entries: 262144 (order: 10, 4194304 bytes)
>>
>> TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
>>
>> TCP: Hash tables configured (established 262144 bind 65536)
>>
>> TCP reno registered
>>
>> NET: Registered protocol family 1
>>
>> Simple Boot Flag at 0x7a set to 0x1
>>
>> Installing knfsd (copyright (C) 1996 okir@monad.swb.de).
>>
>> msgmni has been set to 7517
>>
>> io scheduler noop registered
>>
>> io scheduler cfq registered (default)
>>
>> pcieport-driver 0000:00:01.0: found MSI capability
>>
>> pcieport-driver 0000:00:1c.0: found MSI capability
>>
>> input: Power Button (FF) as /class/input/input0
>>
>> ACPI: Power Button (FF) [PWRF]
>>
>> input: Power Button (CM) as /class/input/input1
>>
>> ACPI: Power Button (CM) [VBTN]
>>
>> xenbus_probe_backend_init bus registered ok
>>
>> xenbus_probe_frontend_init bus registered ok
>>
>> Event-channel device installed.
>>
>> ***blkif_init
>>
>> Real Time Clock Driver v1.12ac
>>
>> Linux agpgart interface v0.103
>>
>> floppy0: Unable to grab IRQ6 for the floppy driver
>>
>> brd: module loaded
>>
>> loop: module loaded
>>
>> tun: Universal TUN/TAP device driver, 1.6
>>
>> tun: (C) 1999-2004 Max Krasnyansky <maxk@qualcomm.com>
>>
>> console [netcon0] enabled
>>
>> netconsole: network logging started
>>
>> Driver 'sd' needs updating - please use bus_type methods
>>
>> Driver 'sr' needs updating - please use bus_type methods
>>
>> xen_set_ioapic_routing: irq 31 gsi 18 vector 160 ioapic 0 pin 18
>> triggering 0 polarity 1
>>
>> ahci 0000:00:1f.2: PCI INT C -> GSI 18 (level, low) -> IRQ 31
>>
>> xen: PCI device 0000:00:1f.2 pin 3 -> irq 31
>>
>> ahci 0000:00:1f.2: AHCI 0001.0200 32 slots 6 ports 3 Gbps 0x27 impl
SATA
>> mode
>>
>> ahci 0000:00:1f.2: flags: 64bit ncq sntf pm led clo pmp pio slum part
ems
>>
>> (XEN) unexpected IRQ trap at vector 59
>>
>> (XEN) unexpected IRQ trap at vector 59
>>
>> scsi0 : ahci
>>
>> scsi1 : ahci
>>
>> scsi2 : ahci
>>
>> scsi3 : ahci
>>
>> scsi4 : ahci
>>
>> scsi5 : ahci
>>
>> ata1: SATA max UDMA/133 abar m2048@0xff970000 port 0xff970100 irq 1277
>>
>> ata2: SATA max UDMA/133 abar m2048@0xff970000 port 0xff970180 irq 1277
>>
>> ata3: SATA max UDMA/133 abar m2048@0xff970000 port 0xff970200 irq 1277
>>
>> ata4: DUMMY
>>
>> ata5: DUMMY
>>
>> ata6: SATA max UDMA/133 abar m2048@0xff970000 port 0xff970380 irq 1277
>>
>> (XEN) unexpected IRQ trap at vector 59
>>
>> ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
>>
>> (XEN) unexpected IRQ trap at vector 59
>>
>> ata1.00: qc timeout (cmd 0xec)
>>
>> ata1.00: failed to IDENTIFY (I/O error, err_mask=0x4)
>>
>> (XEN) unexpected IRQ trap at vector 59
>>
>> ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
>>
>> (XEN) unexpected IRQ trap at vector 59
>>
>> ata1.00: qc timeout (cmd 0xec)
>>
>> ata1.00: failed to IDENTIFY (I/O error, err_mask=0x4)
>>
>> (XEN) unexpected IRQ trap at vector 59
>>
>> ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
>>
>> (XEN) unexpected IRQ trap at vector 59
>>
>> ata1.00: qc timeout (cmd 0xec)
>>
>> ata1.00: failed to IDENTIFY (I/O error, err_mask=0x4)
>>
>> (XEN) unexpected IRQ trap at vector 59
>>
>> ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
>>
>> ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
>>
>> (XEN) unexpected IRQ trap at vector 59
>>
>> ata2.00: qc timeout (cmd 0xa1)
>>
>> ata2.00: failed to IDENTIFY (I/O error, err_mask=0x4)
>>
>> ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
>>
>> (XEN) unexpected IRQ trap at vector 59
>>
>> ata2.00: qc timeout (cmd 0xa1)
>>
>> ata2.00: failed to IDENTIFY (I/O error, err_mask=0x4)
>>
>> ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
>>
>> (XEN) unexpected IRQ trap at vector 59
>>
>> ata2.00: qc timeout (cmd 0xa1)
>>
>> ata2.00: failed to IDENTIFY (I/O error, err_mask=0x4)
>>
>> ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
>>
>> ata3: SATA link down (SStatus 4 SControl 300)
>>
>> ata6: SATA link down (SStatus 4 SControl 300)
>>
>> PNP: No PS/2 controller found. Probing ports directly.
>>
>> i8042: probe of i8042 failed with error -38
>>
>> mice: PS/2 mouse device common for all mice
>>
>> device-mapper: ioctl: 4.14.0-ioctl (2008-04-23) initialised:
>> dm-devel@redhat.com
>>
>> cpuidle: using governor ladder
>>
>> TCP cubic registered
>>
>> NET: Registered protocol family 17
>>
>> RPC: Registered udp transport module.
>>
>> RPC: Registered tcp transport module.
>>
>> IO APIC resources could be not be allocated.
>>
>> Root-NFS: No NFS server available, giving up.
>>
>> VFS: Unable to mount root fs via NFS, trying floppy.
>>
>> VFS: Insert root floppy and press ENTER
>>
>> Andy
>
> Looks like it is not detecting the drive correctly.
>
> What is your specific controller?
The system is a Dell Optiplex 755 with Intel onboard sata, I'm having
trouble finding the controller model and lspci only shows that it is
AHCI:
*********************************************************************
When i open the box i can see the spec on South Bridge Chipset
and check with manual. Then enter setup and turn on AHCI, reboot
and load F8 for instance ( or just resque disk with 2.6.21 kernel)
to make sure Linux kernel loads AHCI driver to detect SATA HDD
Kernel 2.6.18 and above does detect AHCI mode on Intel's ICH(7,8,9)R,
but not ICH(6,7,8.9) per Intel Storage Matrix this ones don't support
AHCI.
*********************************************************************
00:1f.2 SATA controller: Intel Corporation 6 port SATA AHCI Controller (rev 02)
It is my Xen test server and has been running gentoo linux with both
vanilla kernel 2.6.27 (no xen) and 2.6.27+opensuse xen dom0 patches, I
wanted to start my pv_ops dom0 testing with a machine that I know can
run Xen successfully.
The HD is a Toshiba 2.5" drive as that is all I had to hand when I
installed Gentoo Linux onto this machine, do you think its worth
swapping that for a 3.5"? I've got a raptor lying around somwhere...
Andy
>
> Cheers,
> Todd
>
> --
> Todd Deshane
> http://todddeshane.net
> http://runningxen.com
>
_______________________________________________
Xen-devel mailing list
Xen-devel@lists.xensource.com
http://lists.xensource.com/xen-devel
[-- Attachment #1.2: Type: text/html, Size: 32479 bytes --]
[-- Attachment #2: Type: text/plain, Size: 138 bytes --]
_______________________________________________
Xen-devel mailing list
Xen-devel@lists.xensource.com
http://lists.xensource.com/xen-devel
^ permalink raw reply [flat|nested] 22+ messages in thread
* Re: pv_ops dom0 testing
2008-12-03 17:49 ` Boris Derzhavets
@ 2008-12-03 18:03 ` Andrew Lyon
2008-12-03 18:48 ` Boris Derzhavets
0 siblings, 1 reply; 22+ messages in thread
From: Andrew Lyon @ 2008-12-03 18:03 UTC (permalink / raw)
To: bderzhavets, deshantm, Jeremy Fitzhardinge, xen-devel
Boris,
It does support ahci, and it works with other kernels, the problem is
that I am testing pvops dom0 kernel and it does not work with that.
I included the same drivers I use successfully with other kernels, the
problem is with the pvops dom0 kernel.
Andy
On 03/12/2008, Boris Derzhavets <bderzhavets@yahoo.com> wrote:
>
>
> --- On Wed, 12/3/08, Andrew Lyon <andrew.lyon@gmail.com> wrote:
> From: Andrew Lyon <andrew.lyon@gmail.com>
> Subject: Re: [Xen-devel] pv_ops dom0 testing
> To: deshantm@gmail.com
> Cc: "Jeremy Fitzhardinge" <jeremy@goop.org>, xen-devel@lists.xensource.com
> Date: Wednesday, December 3, 2008, 12:10 PM
>
> On Wed, Dec 3, 2008 at 4:43 PM, Todd Deshane <deshantm@gmail.com> wrote:
>>
>>
>>> I had the system setup to output to serial and vga console
>>> (console=vga,com1) but it seems that the vga console only displays Xen
>>> debug messages,
>>
>> Here is my grub debug setup for reference
>>
>> title Xen 3.4-unstable DEBUG/ Ubuntu 8.10, kernel 2.6.28-rc6-tip
>> root (hd0,0)
>> kernel /boot/xen-3.4-unstable.gz loglvl=all guest_loglvl=all
>> com1=115200,8n1 console=com1 mem=3G
>> module /boot/vmlinuz-2.6.28-rc6-tip root=/dev/sda1 ro
> console=hvc0
>> earlyprintk=xen xencons=ttyS0,115200 nousb
>> module /boot/initrd.img-2.6.28-rc6-tip
>>
>>
>>>
>>> I hooked up a null modem cable and I've now captured
>>> the full xen and linux dmesg, it appears that the onboard intel ahci
>>> sata is not working so the kernel is unable to run init:
>>>
>>> __ __ _____ _____ ___
>>>
>>> \ \/ /___ _ __ |___ / |___ / / _ \
>>>
>>> \ // _ \ '_ \ |_ \ |_ \| | | |
>>>
>>> / \ __/ | | | ___) | ___) | |_| |
>>>
>>> /_/\_\___|_| |_| |____(_)____(_)___/
>>>
>>>
>>>
>>> (XEN) Xen version 3.3.0 (root@(none)) (gcc version 4.1.2 (Gentoo 4.1.2
>>> p1.0.2)) Tue Dec 2 15:55:55 GMT 2008
>>>
>>> (XEN) Latest ChangeSet: unavailable
>>>
>>> (XEN) Command line: com1=115200,8n1 console=vga,com1
>>>
>>> (XEN) Video information:
>>>
>>> (XEN) VGA is text mode 80x25, font 8x16
>>>
>>> (XEN) VBE/DDC methods: V2; EDID transfer time: 1 seconds
>>>
>>> (XEN) Disc information:
>>>
>>> (XEN) Found 1 MBR signatures
>>>
>>> (XEN) Found 1 EDD information structures
>>>
>>> (XEN) Xen-e820 RAM map:
>>>
>>> (XEN) 0000000000000000 - 000000000009ec00 (usable)
>>>
>>> (XEN) 00000000000f0000 - 0000000000100000 (reserved)
>>>
>>> (XEN) 0000000000100000 - 00000000cfdff800 (usable)
>>>
>>> (XEN) 00000000cfdff800 - 00000000cfe53c00 (ACPI NVS)
>>>
>>> (XEN) 00000000cfe53c00 - 00000000cfe55c00 (ACPI data)
>>>
>>> (XEN) 00000000cfe55c00 - 00000000d0000000 (reserved)
>>>
>>> (XEN) 00000000e0000000 - 00000000f0000000 (reserved)
>>>
>>> (XEN) 00000000fec00000 - 00000000fed00400 (reserved)
>>>
>>> (XEN) 00000000fed20000 - 00000000feda0000 (reserved)
>>>
>>> (XEN) 00000000fee00000 - 00000000fef00000 (reserved)
>>>
>>> (XEN) 00000000ffb00000 - 0000000100000000 (reserved)
>>>
>>> (XEN) 0000000100000000 - 0000000128000000 (usable)
>>>
>>> (XEN) System RAM: 3965MB (4060788kB)
>>>
>>> (XEN) ACPI: RSDP 000FEC00, 0024 (r2 DELL )
>>>
>>> (XEN) ACPI: XSDT 000FC5B3, 008C (r1 DELL B9K 15 ASL
>>> 61)
>>>
>>> (XEN) ACPI: FACP 000FC6E3, 00F4 (r3 DELL B9K 15 ASL
>>> 61)
>>>
>>> (XEN) ACPI: DSDT FFF76B39, 4596 (r1 DELL dt_ex 1000 INTL
>>> 20050624)
>>>
>>> (XEN) ACPI: FACS CFDFF800, 0040
>>>
>>> (XEN) ACPI: SSDT FFF7B1EE, 00AA (r1 DELL st_ex 1000 INTL
>>> 20050624)
>>>
>>> (XEN) ACPI: APIC 000FC7D7, 0092 (r1 DELL B9K 15 ASL
>>> 61)
>>>
>>> (XEN) ACPI: BOOT 000FC869, 0028 (r1 DELL B9K 15 ASL
>>> 61)
>>>
>>> (XEN) ACPI: ASF! 000FC891, 0096 (r32 DELL B9K 15 ASL
>>> 61)
>>>
>>> (XEN) ACPI: MCFG 000FC927, 003E (r1 DELL B9K 15 ASL
>>> 61)
>>>
>>> (XEN) ACPI: HPET 000FC965, 0038 (r1 DELL B9K 15 ASL
>>> 61)
>>>
>>> (XEN) ACPI: TCPA 000FCBC1, 0032 (r1 DELL B9K 15 ASL
>>> 61)
>>>
>>> (XEN) ACPI: DMAR 000FCBF3, 00D0 (r1 DELL B9K 15 ASL
>>> 61)
>>>
>>> (XEN) ACPI: SLIC 000FC99D, 0176 (r1 DELL B9K 15 ASL
>>> 61)
>>>
>>> (XEN) ACPI: SSDT CFDFF840, 01F9 (r1 DpgPmm Cpu0Ist 11 INTL
>>> 20050624)
>>>
>>> (XEN) ACPI: SSDT CFDFFC49, 01F9 (r1 DpgPmm Cpu1Ist 11 INTL
>>> 20050624)
>>>
>>> (XEN) ACPI: SSDT CFE00052, 0140 (r1 DpgPmm CpuPm 10 INTL
>>> 20050624)
>>>
>>> (XEN) Xen heap: 14MB (14632kB)
>>>
>>> (XEN) Domain heap initialised
>>>
>>> (XEN) Processor #0 6:15 APIC version 20
>>>
>>> (XEN) Processor #1 6:15 APIC version 20
>>>
>>> (XEN) IOAPIC[0]: apic_id 8, version 32, address 0xfec00000, GSI 0-23
>>>
>>> (XEN) Enabling APIC mode: Flat. Using 1 I/O APICs
>>>
>>> (XEN) Using scheduler: SMP Credit Scheduler (credit)
>>>
>>> (XEN) Detected 2394.042 MHz processor.
>>>
>>> (XEN) HVM: VMX enabled
>>>
>>> (XEN) CPU0: Intel(R) Core(TM)2 CPU 6600 @ 2.40GHz stepping
> 06
>>>
>>> (XEN) Booting processor 1/1 eip 8c000
>>>
>>> (XEN) CPU1: Intel(R) Core(TM)2 CPU 6600 @ 2.40GHz stepping
> 06
>>>
>>> (XEN) Total of 2 processors activated.
>>>
>>> (XEN) ENABLING IO-APIC IRQs
>>>
>>> (XEN) -> Using new ACK method
>>>
>>> (XEN) checking TSC synchronization across 2 CPUs: passed.
>>>
>>> (XEN) Platform timer is 14.318MHz HPET
>>>
>>> (XEN) Brought up 2 CPUs
>>>
>>> (XEN) I/O virtualisation disabled
>>>
>>> (XEN) *** LOADING DOMAIN 0 ***
>>>
>>> (XEN) Xen kernel: 64-bit, lsb, compat32
>>>
>>> (XEN) Dom0 kernel: 64-bit, PAE, lsb, paddr 0x200000 -> 0x777e68
>>>
>>> (XEN) PHYSICAL MEMORY ARRANGEMENT:
>>>
>>> (XEN) Dom0 alloc.: 0000000123000000->0000000124000000 (958126
> pages
>>> to be allocated)
>>>
>>> (XEN) VIRTUAL MEMORY ARRANGEMENT:
>>>
>>> (XEN) Loaded kernel: ffffffff80200000->ffffffff80777e68
>>>
>>> (XEN) Init. ramdisk: ffffffff80778000->ffffffff80778000
>>>
>>> (XEN) Phys-Mach map: ffffffff80778000->ffffffff80ecf570
>>>
>>> (XEN) Start info: ffffffff80ed0000->ffffffff80ed04a4
>>>
>>> (XEN) Page tables: ffffffff80ed1000->ffffffff80edc000
>>>
>>> (XEN) Boot stack: ffffffff80edc000->ffffffff80edd000
>>>
>>> (XEN) TOTAL: ffffffff80000000->ffffffff81000000
>>>
>>> (XEN) ENTRY ADDRESS: ffffffff8064f200
>>>
>>> (XEN) Dom0 has maximum 2 VCPUs
>>>
>>> (XEN) Scrubbing Free RAM: .done.
>>>
>>> (XEN) Xen trace buffers: disabled
>>>
>>> (XEN) Std. Loglevel: Errors and warnings
>>>
>>> (XEN) Guest Loglevel: Nothing (Rate-limited: Errors and warnings)
>>>
>>> (XEN) Xen is relinquishing VGA console.
>>>
>>> (XEN) *** Serial input -> DOM0 (type 'CTRL-a' three times
> to switch
>>> input to Xen)
>>>
>>> (XEN) Freed 108kB init memory.
>>>
>>> mapping kernel into physical memory
>>>
>>> Xen: setup ISA identity maps
>>>
>>> about to get started...
>>>
>>> PAT disabled on Xen
>>>
>>> Linux version 2.6.28-rc6-tip (root@optiplex755) (gcc version 4.1.2
>>> (Gentoo 4.1.2 p1.0.2)) #2 SMP Wed Dec 3 15:24:08 GMT 2008
>>>
>>> Command line: root=/dev/sda2 console=hvc0 earlyprintk=xen
>>>
>>> KERNEL supported cpus:
>>>
>>> Intel GenuineIntel
>>>
>>> AMD AuthenticAMD
>>>
>>> Centaur CentaurHauls
>>>
>>> BIOS-provided physical RAM map:
>>>
>>> Xen: 0000000000000000 - 00000000000a0000 (usable)
>>>
>>> Xen: 00000000000a0000 - 0000000000100000 (reserved)
>>>
>>> Xen: 0000000000100000 - 0000000000778000 (usable)
>>>
>>> Xen: 0000000000778000 - 0000000000ed1000 (reserved)
>>>
>>> Xen: 0000000000ed1000 - 00000000eaeae000 (usable)
>>>
>>> console [xenboot0] enabled
>>>
>>> DMI 2.5 present.
>>>
>>> last_pfn = 0xeaeae max_arch_pfn = 0x3ffffffff
>>>
>>> init_memory_mapping: 0000000000000000-00000000eaeae000
>>>
>>> last_map_addr: eaeae000 end: eaeae000
>>>
>>> ACPI: RSDP 000FEC00, 0024 (r2 DELL )
>>>
>>> ACPI: XSDT 000FC5B3, 008C (r1 DELL B9K 15 ASL 61)
>>>
>>> ACPI: FACP 000FC6E3, 00F4 (r3 DELL B9K 15 ASL 61)
>>>
>>> ACPI: DSDT FFF76B39, 4596 (r1 DELL dt_ex 1000 INTL 20050624)
>>>
>>> ACPI: FACS CFDFF800, 0040
>>>
>>> ACPI: SSDT FFF7B1EE, 00AA (r1 DELL st_ex 1000 INTL 20050624)
>>>
>>> ACPI: APIC 000FC7D7, 0092 (r1 DELL B9K 15 ASL 61)
>>>
>>> ACPI: BOOT 000FC869, 0028 (r1 DELL B9K 15 ASL 61)
>>>
>>> ACPI: ASF! 000FC891, 0096 (r32 DELL B9K 15 ASL 61)
>>>
>>> ACPI: MCFG 000FC927, 003E (r1 DELL B9K 15 ASL 61)
>>>
>>> ACPI: HPET 000FC965, 0038 (r1 DELL B9K 15 ASL 61)
>>>
>>> ACPI: TCPA 000FCBC1, 0032 (r1 DELL B9K 15 ASL 61)
>>>
>>> ACPI: DMAR 000FCBF3, 00D0 (r1 DELL B9K 15 ASL 61)
>>>
>>> ACPI: SLIC 000FC99D, 0176 (r1 DELL B9K 15 ASL 61)
>>>
>>> ACPI: SSDT CFDFF840, 01F9 (r1 DpgPmm Cpu0Ist 11 INTL 20050624)
>>>
>>> ACPI: SSDT CFDFFC49, 01F9 (r1 DpgPmm Cpu1Ist 11 INTL 20050624)
>>>
>>> ACPI: SSDT CFE00052, 0140 (r1 DpgPmm CpuPm 10 INTL 20050624)
>>>
>>> ACPI: DMI detected: Dell OptiPlex 755
>>>
>>> (5 early reservations) ==> bootmem [0000000000 - 00eaeae000]
>>>
>>> #0 [0000000000 - 0000001000] BIOS data page ==> [0000000000 -
>>> 0000001000]
>>>
>>> #1 [0000006000 - 0000008000] TRAMPOLINE ==> [0000006000 -
>>> 0000008000]
>>>
>>> #2 [0000ed1000 - 0000edc000] XEN PAGETABLES ==> [0000ed1000 -
>>> 0000edc000]
>>>
>>> #3 [0000200000 - 0000777e68] TEXT DATA BSS ==> [0000200000 -
>>> 0000777e68]
>>>
>>> #4 [0000edc000 - 000162b000] PGTABLE ==> [0000edc000 -
>>> 000162b000]
>>>
>>> found SMP MP-table at [ffff8800000fe710] 000fe710
>>>
>>> Zone PFN ranges:
>>>
>>> DMA 0x00000000 -> 0x00001000
>>>
>>> DMA32 0x00001000 -> 0x00100000
>>>
>>> Normal 0x00100000 -> 0x00100000
>>>
>>> Movable zone start PFN for each node
>>>
>>> early_node_map[3] active PFN ranges
>>>
>>> 0: 0x00000000 -> 0x000000a0
>>>
>>> 0: 0x00000100 -> 0x00000778
>>>
>>> 0: 0x00000ed1 -> 0x000eaeae
>>>
>>> ACPI: PM-Timer IO Port: 0x808
>>>
>>> ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
>>>
>>> ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled)
>>>
>>> ACPI: LAPIC (acpi_id[0x03] lapic_id[0x05] disabled)
>>>
>>> ACPI: LAPIC (acpi_id[0x04] lapic_id[0x07] disabled)
>>>
>>> ACPI: LAPIC (acpi_id[0x05] lapic_id[0x00] disabled)
>>>
>>> ACPI: LAPIC (acpi_id[0x06] lapic_id[0x01] disabled)
>>>
>>> ACPI: LAPIC (acpi_id[0x07] lapic_id[0x02] disabled)
>>>
>>> ACPI: LAPIC (acpi_id[0x08] lapic_id[0x03] disabled)
>>>
>>> ACPI: LAPIC_NMI (acpi_id[0xff] high level lint[0x1])
>>>
>>> ACPI: IOAPIC (id[0x08] address[0xfec00000] gsi_base[0])
>>>
>>> IOAPIC[0]: apic_id 8, version 0, address 0xfec00000, GSI 0-23
>>>
>>> ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
>>>
>>> ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
>>>
>>> ACPI: HPET id: 0x8086a301 base: 0xfed00000
>>>
>>> Using ACPI (MADT) for SMP configuration information
>>>
>>> SMP: Allowing 2 CPUs, 0 hotplug CPUs
>>>
>>> (XEN) ioapic_guest_write: apic=0, pin=2, old_irq=0, new_irq=-1
>>>
>>> (XEN) ioapic_guest_write: old_entry=000009f0, new_entry=00010900
>>>
>>> (XEN) ioapic_guest_write: Attempt to remove IO-APIC pin of in-use IRQ!
>>>
>>> (XEN) ioapic_guest_write: apic=0, pin=4, old_irq=4, new_irq=-1
>>>
>>> (XEN) ioapic_guest_write: old_entry=000009f1, new_entry=00010900
>>>
>>> (XEN) ioapic_guest_write: Attempt to remove IO-APIC pin of in-use IRQ!
>>>
>>> Allocating PCI resources starting at ec000000 (gap: eaeae000:15152000)
>>>
>>> PERCPU: Allocating 57344 bytes of per cpu data
>>>
>>> Built 1 zonelists in Zone order, mobility grouping on. Total pages:
>>> 945674
>>>
>>> Kernel command line: root=/dev/sda2 console=hvc0 earlyprintk=xen
>>>
>>> Initializing CPU#0
>>>
>>> xen: allocated irq 9 for acpi 9
>>>
>>> PID hash table entries: 4096 (order: 12, 32768 bytes)
>>>
>>> Detected 2394.042 MHz processor.
>>>
>>> Console: colour dummy device 80x25
>>>
>>> console handover: boot [xenboot0] -> real [hvc0]
>>>
>>> Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes)
>>>
>>> Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes)
>>>
>>> Checking aperture...
>>>
>>> No AGP bridge found
>>>
>>> PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
>>>
>>> Placing software IO TLB between 0x51ca000 - 0x91ca000
>>>
>>> Memory: 3701108k/3848888k available (2519k kernel code, 7908k absent,
>>> 139388k reserved, 1546k data, 420k init)
>>>
>>> installing Xen timer for CPU 0
>>>
>>> Calibrating delay loop (skipped), value calculated using timer
>>> frequency.. 4788.08 BogoMIPS (lpj=9576168)
>>>
>>> Mount-cache hash table entries: 256
>>>
>>> CPU: L1 I cache: 32K, L1 D cache: 32K
>>>
>>> CPU: L2 cache: 4096K
>>>
>>> CPU: Physical Processor ID: 0
>>>
>>> CPU: Processor Core ID: 0
>>>
>>> SMP alternatives: switching to UP code
>>>
>>> ACPI: Core revision 20080926
>>>
>>> cpu 0 spinlock event irq 17
>>>
>>> installing Xen timer for CPU 1
>>>
>>> cpu 1 spinlock event irq 23
>>>
>>> SMP alternatives: switching to SMP code
>>>
>>> Initializing CPU#1
>>>
>>> CPU: L1 I cache: 32K, L1 D cache: 32K
>>>
>>> CPU: L2 cache: 4096K
>>>
>>> CPU: Physical Processor ID: 0
>>>
>>> CPU: Processor Core ID: 0
>>>
>>> Brought up 2 CPUs
>>>
>>> net_namespace: 552 bytes
>>>
>>> Booting paravirtualized kernel on Xen
>>>
>>> Xen version: 3.3.0 (preserve-AD) (dom0)
>>>
>>> Grant table initialized
>>>
>>> NET: Registered protocol family 16
>>>
>>> xenbus_probe_init ok
>>>
>>> ACPI FADT declares the system doesn't support PCIe ASPM, so
> disable it
>>>
>>> ACPI: bus type pci registered
>>>
>>> PCI: Using configuration type 1 for base access
>>>
>>> ACPI: Interpreter enabled
>>>
>>> ACPI: (supports S0 S5)
>>>
>>> ACPI: Using IOAPIC for interrupt routing
>>>
>>> ACPI: ACPI Dock Station Driver: 1 docks/bays found
>>>
>>> ACPI: PCI Root Bridge [PCI0] (0000:00)
>>>
>>> pci 0000:00:01.0: PME# supported from D0 D3hot D3cold
>>>
>>> pci 0000:00:01.0: PME# disabled
>>>
>>> pci 0000:00:03.0: PME# supported from D0 D3hot D3cold
>>>
>>> pci 0000:00:03.0: PME# disabled
>>>
>>> pci 0000:00:19.0: PME# supported from D0 D3hot D3cold
>>>
>>> pci 0000:00:19.0: PME# disabled
>>>
>>> pci 0000:00:1a.7: PME# supported from D0 D3hot D3cold
>>>
>>> pci 0000:00:1a.7: PME# disabled
>>>
>>> pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
>>>
>>> pci 0000:00:1b.0: PME# disabled
>>>
>>> pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
>>>
>>> pci 0000:00:1c.0: PME# disabled
>>>
>>> pci 0000:00:1d.7: PME# supported from D0 D3hot D3cold
>>>
>>> pci 0000:00:1d.7: PME# disabled
>>>
>>> pci 0000:00:1f.0: quirk: region 0800-087f claimed by ICH6
> ACPI/GPIO/TCO
>>>
>>> pci 0000:00:1f.0: quirk: region 0880-08bf claimed by ICH6 GPIO
>>>
>>> pci 0000:00:1f.2: PME# supported from D3hot
>>>
>>> pci 0000:00:1f.2: PME# disabled
>>>
>>> pci 0000:00:1e.0: transparent bridge
>>>
>>> ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 9 10 *11 12 15)
>>>
>>> ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 *5 6 7 9 10 11 12 15)
>>>
>>> ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 7 *9 10 11 12 15)
>>>
>>> ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 9 *10 11 12 15)
>>>
>>> ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 9 10 11 12 15) *0,
>>> disabled.
>>>
>>> ACPI: PCI Interrupt Link [LNKF] (IRQs *3 4 5 6 7 9 10 11 12 15)
>>>
>>> ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 *5 6 7 9 10 11 12 15)
>>>
>>> ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 7 9 *10 11 12 15)
>>>
>>> ACPI Warning (tbutils-0217): Incorrect checksum in table [TCPA] - 00,
>>> should be 87 [20080926]
>>>
>>> xen_balloon: Initialising balloon driver.
>>>
>>> SCSI subsystem initialized
>>>
>>> PCI: Using ACPI for IRQ routing
>>>
>>> pci 0000:00:01.0: BAR 9: can't allocate resource
>>>
>>> pci 0000:01:00.0: BAR 0: can't allocate resource
>>>
>>> Xen: Initializing Xen DMA ops
>>>
>>> Xen: Enabling DMA fallback to swiotlb
>>>
>>> PCI-GART: No AMD GART found.
>>>
>>> pnp: PnP ACPI init
>>>
>>> ACPI: bus type pnp registered
>>>
>>> pnp 00:01: io resource (0x800-0x85f) overlaps 0000:00:1f.0 BAR 7
>>> (0x800-0x87f), disabling
>>>
>>> pnp 00:01: io resource (0x860-0x8ff) overlaps 0000:00:1f.0 BAR 7
>>> (0x800-0x87f), disabling
>>>
>>> system 00:01: ioport range 0xc00-0xc7f has been reserved
>>>
>>> xen_set_ioapic_routing: irq 13 gsi 13 vector 120 ioapic 0 pin 13
>>> triggering 1 polarity 0
>>>
>>> xen_set_ioapic_routing: irq 8 gsi 8 vector 80 ioapic 0 pin 8
>>> triggering 1 polarity 0
>>>
>>> xen_set_ioapic_routing: irq 7 gsi 7 vector 72 ioapic 0 pin 7
>>> triggering 1 polarity 0
>>>
>>> xen_set_ioapic_routing: irq 4 gsi 4 vector 241 ioapic 0 pin 4
>>> triggering 1 polarity 0
>>>
>>> (XEN) ioapic_guest_write: apic=0, pin=4, old_irq=4, new_irq=4
>>>
>>> (XEN) ioapic_guest_write: old_entry=000009f1, new_entry=000189f1
>>>
>>> (XEN) ioapic_guest_write: Attempt to modify IO-APIC pin for in-use
> IRQ!
>>>
>>> pnp: PnP ACPI: found 9 devices
>>>
>>> ACPI: ACPI bus type pnp unregistered
>>>
>>> pci 0000:00:01.0: PCI bridge, secondary bus 0000:01
>>>
>>> pci 0000:00:01.0: IO window: 0xd000-0xdfff
>>>
>>> pci 0000:00:01.0: MEM window: 0xfe900000-0xfeafffff
>>>
>>> pci 0000:00:01.0: PREFETCH window: 0x00000100000000-0x0000010fffffff
>>>
>>> pci 0000:00:1c.0: PCI bridge, secondary bus 0000:02
>>>
>>> pci 0000:00:1c.0: IO window: disabled
>>>
>>> pci 0000:00:1c.0: MEM window: 0xfe800000-0xfe8fffff
>>>
>>> pci 0000:00:1c.0: PREFETCH window: disabled
>>>
>>> pci 0000:00:1e.0: PCI bridge, secondary bus 0000:03
>>>
>>> pci 0000:00:1e.0: IO window: disabled
>>>
>>> pci 0000:00:1e.0: MEM window: disabled
>>>
>>> pci 0000:00:1e.0: PREFETCH window: disabled
>>>
>>> xen_set_ioapic_routing: irq 29 gsi 16 vector 152 ioapic 0 pin 16
>>> triggering 0 polarity 1
>>>
>>> pci 0000:00:01.0: PCI INT A -> GSI 16 (level, low) -> IRQ 29
>>>
>>> xen: PCI device 0000:00:01.0 pin 1 -> irq 29
>>>
>>> xen_allocate_pirq: returning irq 29 for gsi 16
>>>
>>> xen_set_ioapic_routing: irq 29 gsi 16 vector 152 ioapic 0 pin 16
>>> triggering 0 polarity 1
>>>
>>> pci 0000:00:1c.0: PCI INT A -> GSI 16 (level, low) -> IRQ 29
>>>
>>> xen: PCI device 0000:00:1c.0 pin 1 -> irq 29
>>>
>>> bus: 00 index 0 io port: [0x00-0xffff]
>>>
>>> bus: 00 index 1 mmio: [0x000000-0xffffffffffffffff]
>>>
>>> bus: 01 index 0 io port: [0xd000-0xdfff]
>>>
>>> bus: 01 index 1 mmio: [0xfe900000-0xfeafffff]
>>>
>>> bus: 01 index 2 mmio: [0x100000000-0x10fffffff]
>>>
>>> bus: 01 index 3 mmio: [0x0-0x0]
>>>
>>> bus: 02 index 0 mmio: [0x0-0x0]
>>>
>>> bus: 02 index 1 mmio: [0xfe800000-0xfe8fffff]
>>>
>>> bus: 02 index 2 mmio: [0x0-0x0]
>>>
>>> bus: 02 index 3 mmio: [0x0-0x0]
>>>
>>> bus: 03 index 0 mmio: [0x0-0x0]
>>>
>>> bus: 03 index 1 mmio: [0x0-0x0]
>>>
>>> bus: 03 index 2 mmio: [0x0-0x0]
>>>
>>> bus: 03 index 3 io port: [0x00-0xffff]
>>>
>>> bus: 03 index 4 mmio: [0x000000-0xffffffffffffffff]
>>>
>>> NET: Registered protocol family 2
>>>
>>> IP route cache hash table entries: 131072 (order: 8, 1048576 bytes)
>>>
>>> TCP established hash table entries: 262144 (order: 10, 4194304 bytes)
>>>
>>> TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
>>>
>>> TCP: Hash tables configured (established 262144 bind 65536)
>>>
>>> TCP reno registered
>>>
>>> NET: Registered protocol family 1
>>>
>>> Simple Boot Flag at 0x7a set to 0x1
>>>
>>> Installing knfsd (copyright (C) 1996 okir@monad.swb.de).
>>>
>>> msgmni has been set to 7517
>>>
>>> io scheduler noop registered
>>>
>>> io scheduler cfq registered (default)
>>>
>>> pcieport-driver 0000:00:01.0: found MSI capability
>>>
>>> pcieport-driver 0000:00:1c.0: found MSI capability
>>>
>>> input: Power Button (FF) as /class/input/input0
>>>
>>> ACPI: Power Button (FF) [PWRF]
>>>
>>> input: Power Button (CM) as /class/input/input1
>>>
>>> ACPI: Power Button (CM) [VBTN]
>>>
>>> xenbus_probe_backend_init bus registered ok
>>>
>>> xenbus_probe_frontend_init bus registered ok
>>>
>>> Event-channel device installed.
>>>
>>> ***blkif_init
>>>
>>> Real Time Clock Driver v1.12ac
>>>
>>> Linux agpgart interface v0.103
>>>
>>> floppy0: Unable to grab IRQ6 for the floppy driver
>>>
>>> brd: module loaded
>>>
>>> loop: module loaded
>>>
>>> tun: Universal TUN/TAP device driver, 1.6
>>>
>>> tun: (C) 1999-2004 Max Krasnyansky <maxk@qualcomm.com>
>>>
>>> console [netcon0] enabled
>>>
>>> netconsole: network logging started
>>>
>>> Driver 'sd' needs updating - please use bus_type methods
>>>
>>> Driver 'sr' needs updating - please use bus_type methods
>>>
>>> xen_set_ioapic_routing: irq 31 gsi 18 vector 160 ioapic 0 pin 18
>>> triggering 0 polarity 1
>>>
>>> ahci 0000:00:1f.2: PCI INT C -> GSI 18 (level, low) -> IRQ 31
>>>
>>> xen: PCI device 0000:00:1f.2 pin 3 -> irq 31
>>>
>>> ahci 0000:00:1f.2: AHCI 0001.0200 32 slots 6 ports 3 Gbps 0x27 impl
> SATA
>>> mode
>>>
>>> ahci 0000:00:1f.2: flags: 64bit ncq sntf pm led clo pmp pio slum part
> ems
>>>
>>> (XEN) unexpected IRQ trap at vector 59
>>>
>>> (XEN) unexpected IRQ trap at vector 59
>>>
>>> scsi0 : ahci
>>>
>>> scsi1 : ahci
>>>
>>> scsi2 : ahci
>>>
>>> scsi3 : ahci
>>>
>>> scsi4 : ahci
>>>
>>> scsi5 : ahci
>>>
>>> ata1: SATA max UDMA/133 abar m2048@0xff970000 port 0xff970100 irq 1277
>>>
>>> ata2: SATA max UDMA/133 abar m2048@0xff970000 port 0xff970180 irq 1277
>>>
>>> ata3: SATA max UDMA/133 abar m2048@0xff970000 port 0xff970200 irq 1277
>>>
>>> ata4: DUMMY
>>>
>>> ata5: DUMMY
>>>
>>> ata6: SATA max UDMA/133 abar m2048@0xff970000 port 0xff970380 irq 1277
>>>
>>> (XEN) unexpected IRQ trap at vector 59
>>>
>>> ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
>>>
>>> (XEN) unexpected IRQ trap at vector 59
>>>
>>> ata1.00: qc timeout (cmd 0xec)
>>>
>>> ata1.00: failed to IDENTIFY (I/O error, err_mask=0x4)
>>>
>>> (XEN) unexpected IRQ trap at vector 59
>>>
>>> ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
>>>
>>> (XEN) unexpected IRQ trap at vector 59
>>>
>>> ata1.00: qc timeout (cmd 0xec)
>>>
>>> ata1.00: failed to IDENTIFY (I/O error, err_mask=0x4)
>>>
>>> (XEN) unexpected IRQ trap at vector 59
>>>
>>> ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
>>>
>>> (XEN) unexpected IRQ trap at vector 59
>>>
>>> ata1.00: qc timeout (cmd 0xec)
>>>
>>> ata1.00: failed to IDENTIFY (I/O error, err_mask=0x4)
>>>
>>> (XEN) unexpected IRQ trap at vector 59
>>>
>>> ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
>>>
>>> ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
>>>
>>> (XEN) unexpected IRQ trap at vector 59
>>>
>>> ata2.00: qc timeout (cmd 0xa1)
>>>
>>> ata2.00: failed to IDENTIFY (I/O error, err_mask=0x4)
>>>
>>> ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
>>>
>>> (XEN) unexpected IRQ trap at vector 59
>>>
>>> ata2.00: qc timeout (cmd 0xa1)
>>>
>>> ata2.00: failed to IDENTIFY (I/O error, err_mask=0x4)
>>>
>>> ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
>>>
>>> (XEN) unexpected IRQ trap at vector 59
>>>
>>> ata2.00: qc timeout (cmd 0xa1)
>>>
>>> ata2.00: failed to IDENTIFY (I/O error, err_mask=0x4)
>>>
>>> ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
>>>
>>> ata3: SATA link down (SStatus 4 SControl 300)
>>>
>>> ata6: SATA link down (SStatus 4 SControl 300)
>>>
>>> PNP: No PS/2 controller found. Probing ports directly.
>>>
>>> i8042: probe of i8042 failed with error -38
>>>
>>> mice: PS/2 mouse device common for all mice
>>>
>>> device-mapper: ioctl: 4.14.0-ioctl (2008-04-23) initialised:
>>> dm-devel@redhat.com
>>>
>>> cpuidle: using governor ladder
>>>
>>> TCP cubic registered
>>>
>>> NET: Registered protocol family 17
>>>
>>> RPC: Registered udp transport module.
>>>
>>> RPC: Registered tcp transport module.
>>>
>>> IO APIC resources could be not be allocated.
>>>
>>> Root-NFS: No NFS server available, giving up.
>>>
>>> VFS: Unable to mount root fs via NFS, trying floppy.
>>>
>>> VFS: Insert root floppy and press ENTER
>>>
>>> Andy
>>
>> Looks like it is not detecting the drive correctly.
>>
>> What is your specific controller?
>
> The system is a Dell Optiplex 755 with Intel onboard sata, I'm having
> trouble finding the controller model and lspci only shows that it is
> AHCI:
> *********************************************************************
> When i open the box i can see the spec on South Bridge Chipset
> and check with manual. Then enter setup and turn on AHCI, reboot
> and load F8 for instance ( or just resque disk with 2.6.21 kernel)
> to make sure Linux kernel loads AHCI driver to detect SATA HDD
> Kernel 2.6.18 and above does detect AHCI mode on Intel's ICH(7,8,9)R,
> but not ICH(6,7,8.9) per Intel Storage Matrix this ones don't support
> AHCI.
> *********************************************************************
>
> 00:1f.2 SATA controller: Intel Corporation 6 port SATA AHCI Controller (rev
> 02)
>
> It is my Xen test server and has been running gentoo linux with both
> vanilla kernel 2.6.27 (no xen) and 2.6.27+opensuse xen dom0 patches, I
> wanted to start my pv_ops dom0 testing with a machine that I know can
> run Xen successfully.
>
> The HD is a Toshiba 2.5" drive as that is all I had to hand when I
> installed Gentoo Linux onto this machine, do you think its worth
> swapping that for a 3.5"? I've got a raptor lying around somwhere...
>
> Andy
>
>
>
>>
>> Cheers,
>> Todd
>>
>> --
>> Todd Deshane
>> http://todddeshane.net
>> http://runningxen.com
>>
>
> _______________________________________________
> Xen-devel mailing list
> Xen-devel@lists.xensource.com
> http://lists.xensource.com/xen-devel
>
>
>
>
--
Sent from my mobile device
^ permalink raw reply [flat|nested] 22+ messages in thread
* Re: pv_ops dom0 testing
2008-12-03 18:03 ` Andrew Lyon
@ 2008-12-03 18:48 ` Boris Derzhavets
2008-12-03 18:55 ` Todd Deshane
2008-12-03 19:34 ` Andrew Lyon
0 siblings, 2 replies; 22+ messages in thread
From: Boris Derzhavets @ 2008-12-03 18:48 UTC (permalink / raw)
To: deshantm, Jeremy Fitzhardinge, xen-devel, Andrew Lyon
[-- Attachment #1.1: Type: text/plain, Size: 26012 bytes --]
Andy,
I am a bit confused , trying to follow up the thread running by Todd and you.
Are this messages coming up on your box ?
pci 0000:00:1f.0: quirk: region 0800-087f claimed by ICH6 ACPI/GPIO/TCO
pci 0000:00:1f.0: quirk: region 0880-08bf claimed by ICH6 GPIO
Boris
--- On Wed, 12/3/08, Andrew Lyon <andrew.lyon@gmail.com> wrote:
From: Andrew Lyon <andrew.lyon@gmail.com>
Subject: Re: pv_ops dom0 testing
To: bderzhavets@yahoo.com, deshantm@gmail.com, "Jeremy Fitzhardinge" <jeremy@goop.org>, xen-devel@lists.xensource.com
Date: Wednesday, December 3, 2008, 1:03 PM
Boris,
It does support ahci, and it works with other kernels, the problem is
that I am testing pvops dom0 kernel and it does not work with that.
I included the same drivers I use successfully with other kernels, the
problem is with the pvops dom0 kernel.
Andy
On 03/12/2008, Boris Derzhavets <bderzhavets@yahoo.com> wrote:
>
>
> --- On Wed, 12/3/08, Andrew Lyon <andrew.lyon@gmail.com> wrote:
> From: Andrew Lyon <andrew.lyon@gmail.com>
> Subject: Re: [Xen-devel] pv_ops dom0 testing
> To: deshantm@gmail.com
> Cc: "Jeremy Fitzhardinge" <jeremy@goop.org>,
xen-devel@lists.xensource.com
> Date: Wednesday, December 3, 2008, 12:10 PM
>
> On Wed, Dec 3, 2008 at 4:43 PM, Todd Deshane <deshantm@gmail.com>
wrote:
>>
>>
>>> I had the system setup to output to serial and vga console
>>> (console=vga,com1) but it seems that the vga console only displays
Xen
>>> debug messages,
>>
>> Here is my grub debug setup for reference
>>
>> title Xen 3.4-unstable DEBUG/ Ubuntu 8.10, kernel
2.6.28-rc6-tip
>> root (hd0,0)
>> kernel /boot/xen-3.4-unstable.gz loglvl=all guest_loglvl=all
>> com1=115200,8n1 console=com1 mem=3G
>> module /boot/vmlinuz-2.6.28-rc6-tip root=/dev/sda1 ro
> console=hvc0
>> earlyprintk=xen xencons=ttyS0,115200 nousb
>> module /boot/initrd.img-2.6.28-rc6-tip
>>
>>
>>>
>>> I hooked up a null modem cable and I've now captured
>>> the full xen and linux dmesg, it appears that the onboard intel
ahci
>>> sata is not working so the kernel is unable to run init:
>>>
>>> __ __ _____ _____ ___
>>>
>>> \ \/ /___ _ __ |___ / |___ / / _ \
>>>
>>> \ // _ \ '_ \ |_ \ |_ \| | | |
>>>
>>> / \ __/ | | | ___) | ___) | |_| |
>>>
>>> /_/\_\___|_| |_| |____(_)____(_)___/
>>>
>>>
>>>
>>> (XEN) Xen version 3.3.0 (root@(none)) (gcc version 4.1.2 (Gentoo
4.1.2
>>> p1.0.2)) Tue Dec 2 15:55:55 GMT 2008
>>>
>>> (XEN) Latest ChangeSet: unavailable
>>>
>>> (XEN) Command line: com1=115200,8n1 console=vga,com1
>>>
>>> (XEN) Video information:
>>>
>>> (XEN) VGA is text mode 80x25, font 8x16
>>>
>>> (XEN) VBE/DDC methods: V2; EDID transfer time: 1 seconds
>>>
>>> (XEN) Disc information:
>>>
>>> (XEN) Found 1 MBR signatures
>>>
>>> (XEN) Found 1 EDD information structures
>>>
>>> (XEN) Xen-e820 RAM map:
>>>
>>> (XEN) 0000000000000000 - 000000000009ec00 (usable)
>>>
>>> (XEN) 00000000000f0000 - 0000000000100000 (reserved)
>>>
>>> (XEN) 0000000000100000 - 00000000cfdff800 (usable)
>>>
>>> (XEN) 00000000cfdff800 - 00000000cfe53c00 (ACPI NVS)
>>>
>>> (XEN) 00000000cfe53c00 - 00000000cfe55c00 (ACPI data)
>>>
>>> (XEN) 00000000cfe55c00 - 00000000d0000000 (reserved)
>>>
>>> (XEN) 00000000e0000000 - 00000000f0000000 (reserved)
>>>
>>> (XEN) 00000000fec00000 - 00000000fed00400 (reserved)
>>>
>>> (XEN) 00000000fed20000 - 00000000feda0000 (reserved)
>>>
>>> (XEN) 00000000fee00000 - 00000000fef00000 (reserved)
>>>
>>> (XEN) 00000000ffb00000 - 0000000100000000 (reserved)
>>>
>>> (XEN) 0000000100000000 - 0000000128000000 (usable)
>>>
>>> (XEN) System RAM: 3965MB (4060788kB)
>>>
>>> (XEN) ACPI: RSDP 000FEC00, 0024 (r2 DELL )
>>>
>>> (XEN) ACPI: XSDT 000FC5B3, 008C (r1 DELL B9K 15 ASL
>>> 61)
>>>
>>> (XEN) ACPI: FACP 000FC6E3, 00F4 (r3 DELL B9K 15 ASL
>>> 61)
>>>
>>> (XEN) ACPI: DSDT FFF76B39, 4596 (r1 DELL dt_ex 1000 INTL
>>> 20050624)
>>>
>>> (XEN) ACPI: FACS CFDFF800, 0040
>>>
>>> (XEN) ACPI: SSDT FFF7B1EE, 00AA (r1 DELL st_ex 1000 INTL
>>> 20050624)
>>>
>>> (XEN) ACPI: APIC 000FC7D7, 0092 (r1 DELL B9K 15 ASL
>>> 61)
>>>
>>> (XEN) ACPI: BOOT 000FC869, 0028 (r1 DELL B9K 15 ASL
>>> 61)
>>>
>>> (XEN) ACPI: ASF! 000FC891, 0096 (r32 DELL B9K 15 ASL
>>> 61)
>>>
>>> (XEN) ACPI: MCFG 000FC927, 003E (r1 DELL B9K 15 ASL
>>> 61)
>>>
>>> (XEN) ACPI: HPET 000FC965, 0038 (r1 DELL B9K 15 ASL
>>> 61)
>>>
>>> (XEN) ACPI: TCPA 000FCBC1, 0032 (r1 DELL B9K 15 ASL
>>> 61)
>>>
>>> (XEN) ACPI: DMAR 000FCBF3, 00D0 (r1 DELL B9K 15 ASL
>>> 61)
>>>
>>> (XEN) ACPI: SLIC 000FC99D, 0176 (r1 DELL B9K 15 ASL
>>> 61)
>>>
>>> (XEN) ACPI: SSDT CFDFF840, 01F9 (r1 DpgPmm Cpu0Ist 11 INTL
>>> 20050624)
>>>
>>> (XEN) ACPI: SSDT CFDFFC49, 01F9 (r1 DpgPmm Cpu1Ist 11 INTL
>>> 20050624)
>>>
>>> (XEN) ACPI: SSDT CFE00052, 0140 (r1 DpgPmm CpuPm 10 INTL
>>> 20050624)
>>>
>>> (XEN) Xen heap: 14MB (14632kB)
>>>
>>> (XEN) Domain heap initialised
>>>
>>> (XEN) Processor #0 6:15 APIC version 20
>>>
>>> (XEN) Processor #1 6:15 APIC version 20
>>>
>>> (XEN) IOAPIC[0]: apic_id 8, version 32, address 0xfec00000, GSI
0-23
>>>
>>> (XEN) Enabling APIC mode: Flat. Using 1 I/O APICs
>>>
>>> (XEN) Using scheduler: SMP Credit Scheduler (credit)
>>>
>>> (XEN) Detected 2394.042 MHz processor.
>>>
>>> (XEN) HVM: VMX enabled
>>>
>>> (XEN) CPU0: Intel(R) Core(TM)2 CPU 6600 @ 2.40GHz
stepping
> 06
>>>
>>> (XEN) Booting processor 1/1 eip 8c000
>>>
>>> (XEN) CPU1: Intel(R) Core(TM)2 CPU 6600 @ 2.40GHz
stepping
> 06
>>>
>>> (XEN) Total of 2 processors activated.
>>>
>>> (XEN) ENABLING IO-APIC IRQs
>>>
>>> (XEN) -> Using new ACK method
>>>
>>> (XEN) checking TSC synchronization across 2 CPUs: passed.
>>>
>>> (XEN) Platform timer is 14.318MHz HPET
>>>
>>> (XEN) Brought up 2 CPUs
>>>
>>> (XEN) I/O virtualisation disabled
>>>
>>> (XEN) *** LOADING DOMAIN 0 ***
>>>
>>> (XEN) Xen kernel: 64-bit, lsb, compat32
>>>
>>> (XEN) Dom0 kernel: 64-bit, PAE, lsb, paddr 0x200000 ->
0x777e68
>>>
>>> (XEN) PHYSICAL MEMORY ARRANGEMENT:
>>>
>>> (XEN) Dom0 alloc.: 0000000123000000->0000000124000000
(958126
> pages
>>> to be allocated)
>>>
>>> (XEN) VIRTUAL MEMORY ARRANGEMENT:
>>>
>>> (XEN) Loaded kernel: ffffffff80200000->ffffffff80777e68
>>>
>>> (XEN) Init. ramdisk: ffffffff80778000->ffffffff80778000
>>>
>>> (XEN) Phys-Mach map: ffffffff80778000->ffffffff80ecf570
>>>
>>> (XEN) Start info: ffffffff80ed0000->ffffffff80ed04a4
>>>
>>> (XEN) Page tables: ffffffff80ed1000->ffffffff80edc000
>>>
>>> (XEN) Boot stack: ffffffff80edc000->ffffffff80edd000
>>>
>>> (XEN) TOTAL: ffffffff80000000->ffffffff81000000
>>>
>>> (XEN) ENTRY ADDRESS: ffffffff8064f200
>>>
>>> (XEN) Dom0 has maximum 2 VCPUs
>>>
>>> (XEN) Scrubbing Free RAM: .done.
>>>
>>> (XEN) Xen trace buffers: disabled
>>>
>>> (XEN) Std. Loglevel: Errors and warnings
>>>
>>> (XEN) Guest Loglevel: Nothing (Rate-limited: Errors and warnings)
>>>
>>> (XEN) Xen is relinquishing VGA console.
>>>
>>> (XEN) *** Serial input -> DOM0 (type 'CTRL-a' three
times
> to switch
>>> input to Xen)
>>>
>>> (XEN) Freed 108kB init memory.
>>>
>>> mapping kernel into physical memory
>>>
>>> Xen: setup ISA identity maps
>>>
>>> about to get started...
>>>
>>> PAT disabled on Xen
>>>
>>> Linux version 2.6.28-rc6-tip (root@optiplex755) (gcc version 4.1.2
>>> (Gentoo 4.1.2 p1.0.2)) #2 SMP Wed Dec 3 15:24:08 GMT 2008
>>>
>>> Command line: root=/dev/sda2 console=hvc0 earlyprintk=xen
>>>
>>> KERNEL supported cpus:
>>>
>>> Intel GenuineIntel
>>>
>>> AMD AuthenticAMD
>>>
>>> Centaur CentaurHauls
>>>
>>> BIOS-provided physical RAM map:
>>>
>>> Xen: 0000000000000000 - 00000000000a0000 (usable)
>>>
>>> Xen: 00000000000a0000 - 0000000000100000 (reserved)
>>>
>>> Xen: 0000000000100000 - 0000000000778000 (usable)
>>>
>>> Xen: 0000000000778000 - 0000000000ed1000 (reserved)
>>>
>>> Xen: 0000000000ed1000 - 00000000eaeae000 (usable)
>>>
>>> console [xenboot0] enabled
>>>
>>> DMI 2.5 present.
>>>
>>> last_pfn = 0xeaeae max_arch_pfn = 0x3ffffffff
>>>
>>> init_memory_mapping: 0000000000000000-00000000eaeae000
>>>
>>> last_map_addr: eaeae000 end: eaeae000
>>>
>>> ACPI: RSDP 000FEC00, 0024 (r2 DELL )
>>>
>>> ACPI: XSDT 000FC5B3, 008C (r1 DELL B9K 15 ASL
61)
>>>
>>> ACPI: FACP 000FC6E3, 00F4 (r3 DELL B9K 15 ASL
61)
>>>
>>> ACPI: DSDT FFF76B39, 4596 (r1 DELL dt_ex 1000 INTL
20050624)
>>>
>>> ACPI: FACS CFDFF800, 0040
>>>
>>> ACPI: SSDT FFF7B1EE, 00AA (r1 DELL st_ex 1000 INTL
20050624)
>>>
>>> ACPI: APIC 000FC7D7, 0092 (r1 DELL B9K 15 ASL
61)
>>>
>>> ACPI: BOOT 000FC869, 0028 (r1 DELL B9K 15 ASL
61)
>>>
>>> ACPI: ASF! 000FC891, 0096 (r32 DELL B9K 15 ASL
61)
>>>
>>> ACPI: MCFG 000FC927, 003E (r1 DELL B9K 15 ASL
61)
>>>
>>> ACPI: HPET 000FC965, 0038 (r1 DELL B9K 15 ASL
61)
>>>
>>> ACPI: TCPA 000FCBC1, 0032 (r1 DELL B9K 15 ASL
61)
>>>
>>> ACPI: DMAR 000FCBF3, 00D0 (r1 DELL B9K 15 ASL
61)
>>>
>>> ACPI: SLIC 000FC99D, 0176 (r1 DELL B9K 15 ASL
61)
>>>
>>> ACPI: SSDT CFDFF840, 01F9 (r1 DpgPmm Cpu0Ist 11 INTL
20050624)
>>>
>>> ACPI: SSDT CFDFFC49, 01F9 (r1 DpgPmm Cpu1Ist 11 INTL
20050624)
>>>
>>> ACPI: SSDT CFE00052, 0140 (r1 DpgPmm CpuPm 10 INTL
20050624)
>>>
>>> ACPI: DMI detected: Dell OptiPlex 755
>>>
>>> (5 early reservations) ==> bootmem [0000000000 - 00eaeae000]
>>>
>>> #0 [0000000000 - 0000001000] BIOS data page ==> [0000000000
-
>>> 0000001000]
>>>
>>> #1 [0000006000 - 0000008000] TRAMPOLINE ==> [0000006000
-
>>> 0000008000]
>>>
>>> #2 [0000ed1000 - 0000edc000] XEN PAGETABLES ==> [0000ed1000
-
>>> 0000edc000]
>>>
>>> #3 [0000200000 - 0000777e68] TEXT DATA BSS ==> [0000200000
-
>>> 0000777e68]
>>>
>>> #4 [0000edc000 - 000162b000] PGTABLE ==> [0000edc000
-
>>> 000162b000]
>>>
>>> found SMP MP-table at [ffff8800000fe710] 000fe710
>>>
>>> Zone PFN ranges:
>>>
>>> DMA 0x00000000 -> 0x00001000
>>>
>>> DMA32 0x00001000 -> 0x00100000
>>>
>>> Normal 0x00100000 -> 0x00100000
>>>
>>> Movable zone start PFN for each node
>>>
>>> early_node_map[3] active PFN ranges
>>>
>>> 0: 0x00000000 -> 0x000000a0
>>>
>>> 0: 0x00000100 -> 0x00000778
>>>
>>> 0: 0x00000ed1 -> 0x000eaeae
>>>
>>> ACPI: PM-Timer IO Port: 0x808
>>>
>>> ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
>>>
>>> ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled)
>>>
>>> ACPI: LAPIC (acpi_id[0x03] lapic_id[0x05] disabled)
>>>
>>> ACPI: LAPIC (acpi_id[0x04] lapic_id[0x07] disabled)
>>>
>>> ACPI: LAPIC (acpi_id[0x05] lapic_id[0x00] disabled)
>>>
>>> ACPI: LAPIC (acpi_id[0x06] lapic_id[0x01] disabled)
>>>
>>> ACPI: LAPIC (acpi_id[0x07] lapic_id[0x02] disabled)
>>>
>>> ACPI: LAPIC (acpi_id[0x08] lapic_id[0x03] disabled)
>>>
>>> ACPI: LAPIC_NMI (acpi_id[0xff] high level lint[0x1])
>>>
>>> ACPI: IOAPIC (id[0x08] address[0xfec00000] gsi_base[0])
>>>
>>> IOAPIC[0]: apic_id 8, version 0, address 0xfec00000, GSI 0-23
>>>
>>> ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
>>>
>>> ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
>>>
>>> ACPI: HPET id: 0x8086a301 base: 0xfed00000
>>>
>>> Using ACPI (MADT) for SMP configuration information
>>>
>>> SMP: Allowing 2 CPUs, 0 hotplug CPUs
>>>
>>> (XEN) ioapic_guest_write: apic=0, pin=2, old_irq=0, new_irq=-1
>>>
>>> (XEN) ioapic_guest_write: old_entry=000009f0, new_entry=00010900
>>>
>>> (XEN) ioapic_guest_write: Attempt to remove IO-APIC pin of in-use
IRQ!
>>>
>>> (XEN) ioapic_guest_write: apic=0, pin=4, old_irq=4, new_irq=-1
>>>
>>> (XEN) ioapic_guest_write: old_entry=000009f1, new_entry=00010900
>>>
>>> (XEN) ioapic_guest_write: Attempt to remove IO-APIC pin of in-use
IRQ!
>>>
>>> Allocating PCI resources starting at ec000000 (gap:
eaeae000:15152000)
>>>
>>> PERCPU: Allocating 57344 bytes of per cpu data
>>>
>>> Built 1 zonelists in Zone order, mobility grouping on. Total
pages:
>>> 945674
>>>
>>> Kernel command line: root=/dev/sda2 console=hvc0 earlyprintk=xen
>>>
>>> Initializing CPU#0
>>>
>>> xen: allocated irq 9 for acpi 9
>>>
>>> PID hash table entries: 4096 (order: 12, 32768 bytes)
>>>
>>> Detected 2394.042 MHz processor.
>>>
>>> Console: colour dummy device 80x25
>>>
>>> console handover: boot [xenboot0] -> real [hvc0]
>>>
>>> Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes)
>>>
>>> Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes)
>>>
>>> Checking aperture...
>>>
>>> No AGP bridge found
>>>
>>> PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
>>>
>>> Placing software IO TLB between 0x51ca000 - 0x91ca000
>>>
>>> Memory: 3701108k/3848888k available (2519k kernel code, 7908k
absent,
>>> 139388k reserved, 1546k data, 420k init)
>>>
>>> installing Xen timer for CPU 0
>>>
>>> Calibrating delay loop (skipped), value calculated using timer
>>> frequency.. 4788.08 BogoMIPS (lpj=9576168)
>>>
>>> Mount-cache hash table entries: 256
>>>
>>> CPU: L1 I cache: 32K, L1 D cache: 32K
>>>
>>> CPU: L2 cache: 4096K
>>>
>>> CPU: Physical Processor ID: 0
>>>
>>> CPU: Processor Core ID: 0
>>>
>>> SMP alternatives: switching to UP code
>>>
>>> ACPI: Core revision 20080926
>>>
>>> cpu 0 spinlock event irq 17
>>>
>>> installing Xen timer for CPU 1
>>>
>>> cpu 1 spinlock event irq 23
>>>
>>> SMP alternatives: switching to SMP code
>>>
>>> Initializing CPU#1
>>>
>>> CPU: L1 I cache: 32K, L1 D cache: 32K
>>>
>>> CPU: L2 cache: 4096K
>>>
>>> CPU: Physical Processor ID: 0
>>>
>>> CPU: Processor Core ID: 0
>>>
>>> Brought up 2 CPUs
>>>
>>> net_namespace: 552 bytes
>>>
>>> Booting paravirtualized kernel on Xen
>>>
>>> Xen version: 3.3.0 (preserve-AD) (dom0)
>>>
>>> Grant table initialized
>>>
>>> NET: Registered protocol family 16
>>>
>>> xenbus_probe_init ok
>>>
>>> ACPI FADT declares the system doesn't support PCIe ASPM, so
> disable it
>>>
>>> ACPI: bus type pci registered
>>>
>>> PCI: Using configuration type 1 for base access
>>>
>>> ACPI: Interpreter enabled
>>>
>>> ACPI: (supports S0 S5)
>>>
>>> ACPI: Using IOAPIC for interrupt routing
>>>
>>> ACPI: ACPI Dock Station Driver: 1 docks/bays found
>>>
>>> ACPI: PCI Root Bridge [PCI0] (0000:00)
>>>
>>> pci 0000:00:01.0: PME# supported from D0 D3hot D3cold
>>>
>>> pci 0000:00:01.0: PME# disabled
>>>
>>> pci 0000:00:03.0: PME# supported from D0 D3hot D3cold
>>>
>>> pci 0000:00:03.0: PME# disabled
>>>
>>> pci 0000:00:19.0: PME# supported from D0 D3hot D3cold
>>>
>>> pci 0000:00:19.0: PME# disabled
>>>
>>> pci 0000:00:1a.7: PME# supported from D0 D3hot D3cold
>>>
>>> pci 0000:00:1a.7: PME# disabled
>>>
>>> pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
>>>
>>> pci 0000:00:1b.0: PME# disabled
>>>
>>> pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
>>>
>>> pci 0000:00:1c.0: PME# disabled
>>>
>>> pci 0000:00:1d.7: PME# supported from D0 D3hot D3cold
>>>
>>> pci 0000:00:1d.7: PME# disabled
>>>
>>> pci 0000:00:1f.0: quirk: region 0800-087f claimed by ICH6
> ACPI/GPIO/TCO
>>>
>>> pci 0000:00:1f.0: quirk: region 0880-08bf claimed by ICH6 GPIO
>>>
>>> pci 0000:00:1f.2: PME# supported from D3hot
>>>
>>> pci 0000:00:1f.2: PME# disabled
>>>
>>> pci 0000:00:1e.0: transparent bridge
>>>
>>> ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 9 10 *11 12 15)
>>>
>>> ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 *5 6 7 9 10 11 12 15)
>>>
>>> ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 7 *9 10 11 12 15)
>>>
>>> ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 9 *10 11 12 15)
>>>
>>> ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 9 10 11 12 15) *0,
>>> disabled.
>>>
>>> ACPI: PCI Interrupt Link [LNKF] (IRQs *3 4 5 6 7 9 10 11 12 15)
>>>
>>> ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 *5 6 7 9 10 11 12 15)
>>>
>>> ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 7 9 *10 11 12 15)
>>>
>>> ACPI Warning (tbutils-0217): Incorrect checksum in table [TCPA] -
00,
>>> should be 87 [20080926]
>>>
>>> xen_balloon: Initialising balloon driver.
>>>
>>> SCSI subsystem initialized
>>>
>>> PCI: Using ACPI for IRQ routing
>>>
>>> pci 0000:00:01.0: BAR 9: can't allocate resource
>>>
>>> pci 0000:01:00.0: BAR 0: can't allocate resource
>>>
>>> Xen: Initializing Xen DMA ops
>>>
>>> Xen: Enabling DMA fallback to swiotlb
>>>
>>> PCI-GART: No AMD GART found.
>>>
>>> pnp: PnP ACPI init
>>>
>>> ACPI: bus type pnp registered
>>>
>>> pnp 00:01: io resource (0x800-0x85f) overlaps 0000:00:1f.0 BAR 7
>>> (0x800-0x87f), disabling
>>>
>>> pnp 00:01: io resource (0x860-0x8ff) overlaps 0000:00:1f.0 BAR 7
>>> (0x800-0x87f), disabling
>>>
>>> system 00:01: ioport range 0xc00-0xc7f has been reserved
>>>
>>> xen_set_ioapic_routing: irq 13 gsi 13 vector 120 ioapic 0 pin 13
>>> triggering 1 polarity 0
>>>
>>> xen_set_ioapic_routing: irq 8 gsi 8 vector 80 ioapic 0 pin 8
>>> triggering 1 polarity 0
>>>
>>> xen_set_ioapic_routing: irq 7 gsi 7 vector 72 ioapic 0 pin 7
>>> triggering 1 polarity 0
>>>
>>> xen_set_ioapic_routing: irq 4 gsi 4 vector 241 ioapic 0 pin 4
>>> triggering 1 polarity 0
>>>
>>> (XEN) ioapic_guest_write: apic=0, pin=4, old_irq=4, new_irq=4
>>>
>>> (XEN) ioapic_guest_write: old_entry=000009f1, new_entry=000189f1
>>>
>>> (XEN) ioapic_guest_write: Attempt to modify IO-APIC pin for in-use
> IRQ!
>>>
>>> pnp: PnP ACPI: found 9 devices
>>>
>>> ACPI: ACPI bus type pnp unregistered
>>>
>>> pci 0000:00:01.0: PCI bridge, secondary bus 0000:01
>>>
>>> pci 0000:00:01.0: IO window: 0xd000-0xdfff
>>>
>>> pci 0000:00:01.0: MEM window: 0xfe900000-0xfeafffff
>>>
>>> pci 0000:00:01.0: PREFETCH window:
0x00000100000000-0x0000010fffffff
>>>
>>> pci 0000:00:1c.0: PCI bridge, secondary bus 0000:02
>>>
>>> pci 0000:00:1c.0: IO window: disabled
>>>
>>> pci 0000:00:1c.0: MEM window: 0xfe800000-0xfe8fffff
>>>
>>> pci 0000:00:1c.0: PREFETCH window: disabled
>>>
>>> pci 0000:00:1e.0: PCI bridge, secondary bus 0000:03
>>>
>>> pci 0000:00:1e.0: IO window: disabled
>>>
>>> pci 0000:00:1e.0: MEM window: disabled
>>>
>>> pci 0000:00:1e.0: PREFETCH window: disabled
>>>
>>> xen_set_ioapic_routing: irq 29 gsi 16 vector 152 ioapic 0 pin 16
>>> triggering 0 polarity 1
>>>
>>> pci 0000:00:01.0: PCI INT A -> GSI 16 (level, low) -> IRQ 29
>>>
>>> xen: PCI device 0000:00:01.0 pin 1 -> irq 29
>>>
>>> xen_allocate_pirq: returning irq 29 for gsi 16
>>>
>>> xen_set_ioapic_routing: irq 29 gsi 16 vector 152 ioapic 0 pin 16
>>> triggering 0 polarity 1
>>>
>>> pci 0000:00:1c.0: PCI INT A -> GSI 16 (level, low) -> IRQ 29
>>>
>>> xen: PCI device 0000:00:1c.0 pin 1 -> irq 29
>>>
>>> bus: 00 index 0 io port: [0x00-0xffff]
>>>
>>> bus: 00 index 1 mmio: [0x000000-0xffffffffffffffff]
>>>
>>> bus: 01 index 0 io port: [0xd000-0xdfff]
>>>
>>> bus: 01 index 1 mmio: [0xfe900000-0xfeafffff]
>>>
>>> bus: 01 index 2 mmio: [0x100000000-0x10fffffff]
>>>
>>> bus: 01 index 3 mmio: [0x0-0x0]
>>>
>>> bus: 02 index 0 mmio: [0x0-0x0]
>>>
>>> bus: 02 index 1 mmio: [0xfe800000-0xfe8fffff]
>>>
>>> bus: 02 index 2 mmio: [0x0-0x0]
>>>
>>> bus: 02 index 3 mmio: [0x0-0x0]
>>>
>>> bus: 03 index 0 mmio: [0x0-0x0]
>>>
>>> bus: 03 index 1 mmio: [0x0-0x0]
>>>
>>> bus: 03 index 2 mmio: [0x0-0x0]
>>>
>>> bus: 03 index 3 io port: [0x00-0xffff]
>>>
>>> bus: 03 index 4 mmio: [0x000000-0xffffffffffffffff]
>>>
>>> NET: Registered protocol family 2
>>>
>>> IP route cache hash table entries: 131072 (order: 8, 1048576
bytes)
>>>
>>> TCP established hash table entries: 262144 (order: 10, 4194304
bytes)
>>>
>>> TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
>>>
>>> TCP: Hash tables configured (established 262144 bind 65536)
>>>
>>> TCP reno registered
>>>
>>> NET: Registered protocol family 1
>>>
>>> Simple Boot Flag at 0x7a set to 0x1
>>>
>>> Installing knfsd (copyright (C) 1996 okir@monad.swb.de).
>>>
>>> msgmni has been set to 7517
>>>
>>> io scheduler noop registered
>>>
>>> io scheduler cfq registered (default)
>>>
>>> pcieport-driver 0000:00:01.0: found MSI capability
>>>
>>> pcieport-driver 0000:00:1c.0: found MSI capability
>>>
>>> input: Power Button (FF) as /class/input/input0
>>>
>>> ACPI: Power Button (FF) [PWRF]
>>>
>>> input: Power Button (CM) as /class/input/input1
>>>
>>> ACPI: Power Button (CM) [VBTN]
>>>
>>> xenbus_probe_backend_init bus registered ok
>>>
>>> xenbus_probe_frontend_init bus registered ok
>>>
>>> Event-channel device installed.
>>>
>>> ***blkif_init
>>>
>>> Real Time Clock Driver v1.12ac
>>>
>>> Linux agpgart interface v0.103
>>>
>>> floppy0: Unable to grab IRQ6 for the floppy driver
>>>
>>> brd: module loaded
>>>
>>> loop: module loaded
>>>
>>> tun: Universal TUN/TAP device driver, 1.6
>>>
>>> tun: (C) 1999-2004 Max Krasnyansky <maxk@qualcomm.com>
>>>
>>> console [netcon0] enabled
>>>
>>> netconsole: network logging started
>>>
>>> Driver 'sd' needs updating - please use bus_type methods
>>>
>>> Driver 'sr' needs updating - please use bus_type methods
>>>
>>> xen_set_ioapic_routing: irq 31 gsi 18 vector 160 ioapic 0 pin 18
>>> triggering 0 polarity 1
>>>
>>> ahci 0000:00:1f.2: PCI INT C -> GSI 18 (level, low) -> IRQ
31
>>>
>>> xen: PCI device 0000:00:1f.2 pin 3 -> irq 31
>>>
>>> ahci 0000:00:1f.2: AHCI 0001.0200 32 slots 6 ports 3 Gbps 0x27
impl
> SATA
>>> mode
>>>
>>> ahci 0000:00:1f.2: flags: 64bit ncq sntf pm led clo pmp pio slum
part
> ems
>>>
>>> (XEN) unexpected IRQ trap at vector 59
>>>
>>> (XEN) unexpected IRQ trap at vector 59
>>>
>>> scsi0 : ahci
>>>
>>> scsi1 : ahci
>>>
>>> scsi2 : ahci
>>>
>>> scsi3 : ahci
>>>
>>> scsi4 : ahci
>>>
>>> scsi5 : ahci
>>>
>>> ata1: SATA max UDMA/133 abar m2048@0xff970000 port 0xff970100 irq
1277
>>>
>>> ata2: SATA max UDMA/133 abar m2048@0xff970000 port 0xff970180 irq
1277
>>>
>>> ata3: SATA max UDMA/133 abar m2048@0xff970000 port 0xff970200 irq
1277
>>>
>>> ata4: DUMMY
>>>
>>> ata5: DUMMY
>>>
>>> ata6: SATA max UDMA/133 abar m2048@0xff970000 port 0xff970380 irq
1277
>>>
>>> (XEN) unexpected IRQ trap at vector 59
>>>
>>> ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
>>>
>>> (XEN) unexpected IRQ trap at vector 59
>>>
>>> ata1.00: qc timeout (cmd 0xec)
>>>
>>> ata1.00: failed to IDENTIFY (I/O error, err_mask=0x4)
>>>
>>> (XEN) unexpected IRQ trap at vector 59
>>>
>>> ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
>>>
>>> (XEN) unexpected IRQ trap at vector 59
>>>
>>> ata1.00: qc timeout (cmd 0xec)
>>>
>>> ata1.00: failed to IDENTIFY (I/O error, err_mask=0x4)
>>>
>>> (XEN) unexpected IRQ trap at vector 59
>>>
>>> ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
>>>
>>> (XEN) unexpected IRQ trap at vector 59
>>>
>>> ata1.00: qc timeout (cmd 0xec)
>>>
>>> ata1.00: failed to IDENTIFY (I/O error, err_mask=0x4)
>>>
>>> (XEN) unexpected IRQ trap at vector 59
>>>
>>> ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
>>>
>>> ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
>>>
>>> (XEN) unexpected IRQ trap at vector 59
>>>
>>> ata2.00: qc timeout (cmd 0xa1)
>>>
>>> ata2.00: failed to IDENTIFY (I/O error, err_mask=0x4)
>>>
>>> ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
>>>
>>> (XEN) unexpected IRQ trap at vector 59
>>>
>>> ata2.00: qc timeout (cmd 0xa1)
>>>
>>> ata2.00: failed to IDENTIFY (I/O error, err_mask=0x4)
>>>
>>> ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
>>>
>>> (XEN) unexpected IRQ trap at vector 59
>>>
>>> ata2.00: qc timeout (cmd 0xa1)
>>>
>>> ata2.00: failed to IDENTIFY (I/O error, err_mask=0x4)
>>>
>>> ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
>>>
>>> ata3: SATA link down (SStatus 4 SControl 300)
>>>
>>> ata6: SATA link down (SStatus 4 SControl 300)
>>>
>>> PNP: No PS/2 controller found. Probing ports directly.
>>>
>>> i8042: probe of i8042 failed with error -38
>>>
>>> mice: PS/2 mouse device common for all mice
>>>
>>> device-mapper: ioctl: 4.14.0-ioctl (2008-04-23) initialised:
>>> dm-devel@redhat.com
>>>
>>> cpuidle: using governor ladder
>>>
>>> TCP cubic registered
>>>
>>> NET: Registered protocol family 17
>>>
>>> RPC: Registered udp transport module.
>>>
>>> RPC: Registered tcp transport module.
>>>
>>> IO APIC resources could be not be allocated.
>>>
>>> Root-NFS: No NFS server available, giving up.
>>>
>>> VFS: Unable to mount root fs via NFS, trying floppy.
>>>
>>> VFS: Insert root floppy and press ENTER
>>>
>>> Andy
>>
>> Looks like it is not detecting the drive correctly.
>>
>> What is your specific controller?
>
> The system is a Dell Optiplex 755 with Intel onboard sata, I'm having
> trouble finding the controller model and lspci only shows that it is
> AHCI:
> *********************************************************************
> When i open the box i can see the spec on South Bridge Chipset
> and check with manual. Then enter setup and turn on AHCI, reboot
> and load F8 for instance ( or just resque disk with 2.6.21 kernel)
> to make sure Linux kernel loads AHCI driver to detect SATA HDD
> Kernel 2.6.18 and above does detect AHCI mode on Intel's ICH(7,8,9)R,
> but not ICH(6,7,8.9) per Intel Storage Matrix this ones don't support
> AHCI.
> *********************************************************************
>
> 00:1f.2 SATA controller: Intel Corporation 6 port SATA AHCI Controller
(rev
> 02)
>
> It is my Xen test server and has been running gentoo linux with both
> vanilla kernel 2.6.27 (no xen) and 2.6.27+opensuse xen dom0 patches, I
> wanted to start my pv_ops dom0 testing with a machine that I know can
> run Xen successfully.
>
> The HD is a Toshiba 2.5" drive as that is all I had to hand when I
> installed Gentoo Linux onto this machine, do you think its worth
> swapping that for a 3.5"? I've got a raptor lying around
somwhere...
>
> Andy
>
>
>
>>
>> Cheers,
>> Todd
>>
>> --
>> Todd Deshane
>> http://todddeshane.net
>> http://runningxen.com
>>
>
> _______________________________________________
> Xen-devel mailing list
> Xen-devel@lists.xensource.com
> http://lists.xensource.com/xen-devel
>
>
>
>
--
Sent from my mobile device
[-- Attachment #1.2: Type: text/html, Size: 37460 bytes --]
[-- Attachment #2: Type: text/plain, Size: 138 bytes --]
_______________________________________________
Xen-devel mailing list
Xen-devel@lists.xensource.com
http://lists.xensource.com/xen-devel
^ permalink raw reply [flat|nested] 22+ messages in thread
* Re: pv_ops dom0 testing
2008-12-03 18:48 ` Boris Derzhavets
@ 2008-12-03 18:55 ` Todd Deshane
2008-12-03 19:34 ` Andrew Lyon
1 sibling, 0 replies; 22+ messages in thread
From: Todd Deshane @ 2008-12-03 18:55 UTC (permalink / raw)
To: bderzhavets; +Cc: Jeremy Fitzhardinge, xen-devel, Andrew Lyon
Boris,
On Wed, Dec 3, 2008 at 1:48 PM, Boris Derzhavets <bderzhavets@yahoo.com> wrote:
> Andy,
>
> I am a bit confused , trying to follow up the thread running by Todd and
> you.
> Are this messages coming up on your box ?
>
> pci 0000:00:1f.0: quirk: region 0800-087f claimed by ICH6 ACPI/GPIO/TCO
> pci 0000:00:1f.0: quirk: region 0880-08bf claimed by ICH6 GPIO
>
These lines are coming up for me (previously attached on xen-devel as
xenboot.out3)
[ 0.538964] pci 0000:00:1f.0: quirk: region 0800-087f claimed by
ICH6 ACPI/GPIO/TCO
[ 0.538973] pci 0000:00:1f.0: quirk: region 0880-08bf claimed by ICH6 GPIO
What do you make of them?
Cheers,
Todd
^ permalink raw reply [flat|nested] 22+ messages in thread
* Re: pv_ops dom0 testing
2008-12-03 18:48 ` Boris Derzhavets
2008-12-03 18:55 ` Todd Deshane
@ 2008-12-03 19:34 ` Andrew Lyon
2008-12-03 19:39 ` Andrew Lyon
2008-12-03 20:16 ` Jeremy Fitzhardinge
1 sibling, 2 replies; 22+ messages in thread
From: Andrew Lyon @ 2008-12-03 19:34 UTC (permalink / raw)
To: bderzhavets; +Cc: deshantm, Jeremy Fitzhardinge, xen-devel
On Wed, Dec 3, 2008 at 6:48 PM, Boris Derzhavets <bderzhavets@yahoo.com> wrote:
> Andy,
>
> I am a bit confused , trying to follow up the thread running by Todd and
> you.
> Are this messages coming up on your box ?
>
> pci 0000:00:1f.0: quirk: region 0800-087f claimed by ICH6 ACPI/GPIO/TCO
> pci 0000:00:1f.0: quirk: region 0880-08bf claimed by ICH6 GPIO
Yes they are, along with several other messages that look bad:
(XEN) ioapic_guest_write: apic=0, pin=4, old_irq=4, new_irq=4
(XEN) ioapic_guest_write: old_entry=000009f1, new_entry=000189f1
(XEN) ioapic_guest_write: Attempt to modify IO-APIC pin for in-use IRQ!
(XEN) unexpected IRQ trap at vector 59
ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
(XEN) unexpected IRQ trap at vector 59
ata1.00: qc timeout (cmd 0xec)
ata1.00: failed to IDENTIFY (I/O error, err_mask=0x4)
(XEN) unexpected IRQ trap at vector 59
ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
(XEN) unexpected IRQ trap at vector 59
ata1.00: qc timeout (cmd 0xec)
Kernel 2.6.27.7 vanilla or patched with opensuse xen dom0 patches
detects the controller correctly using ahci driver:
optiplex755 ~ # uname -a
Linux optiplex755 2.6.27-xen-r3 #1 SMP Tue Dec 2 16:05:20 GMT 2008
x86_64 Intel(R) Core(TM)2 CPU 6600 @ 2.40GHz GenuineIntel GNU/Linux
optiplex755 ~ # lsscsi -H
[0] ahci
[1] ahci
[2] ahci
[3] ahci
[4] ahci
[5] ahci
[6] usb-storage
optiplex755 ~ # dmesg | grep -E "ahca|scsi|sd|ata"
Command line: root=/dev/sda2 swiotlb=256 pciback.hide=(03:02.0) console=xvc0
PERCPU: Allocating 43104 bytes of per cpu data
Kernel command line: root=/dev/sda2 swiotlb=256 pciback.hide=(03:02.0)
console=xvc0
Memory: 3627084k/3847584k available (2956k kernel code, 212136k
reserved, 1580k data, 264k init)
libata version 3.00 loaded.
Installing knfsd (copyright (C) 1996 okir@monad.swb.de).
Driver 'sd' needs updating - please use bus_type methods
scsi0 : ahci
scsi1 : ahci
scsi2 : ahci
scsi3 : ahci
scsi4 : ahci
scsi5 : ahci
ata1: SATA max UDMA/133 irq_stat 0x00000040, connection status changed irq 18
ata2: SATA max UDMA/133 irq_stat 0x00000040, connection status changed irq 18
ata3: SATA max UDMA/133 abar m2048@0xff970000 port 0xff970200 irq 18
ata4: DUMMY
ata5: DUMMY
ata6: SATA max UDMA/133 abar m2048@0xff970000 port 0xff970380 irq 18
ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
ata1.00: ATA-7: TOSHIBA MK6034GSX, AH101A, max UDMA/100
ata1.00: 117210240 sectors, multi 16: LBA48 NCQ (depth 31/32)
ata1.00: configured for UDMA/100
ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
ata2.00: ATAPI: HL-DT-ST DVD+/-RW GSA-H73N, B103, max UDMA/100
ata2.00: configured for UDMA/100
ata3: SATA link down (SStatus 4 SControl 300)
ata6: SATA link down (SStatus 4 SControl 300)
scsi 0:0:0:0: Direct-Access ATA TOSHIBA MK6034GS AH10 PQ: 0 ANSI: 5
sd 0:0:0:0: [sda] 117210240 512-byte hardware sectors (60012 MB)
sd 0:0:0:0: [sda] Write Protect is off
sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't
support DPO or FUA
sd 0:0:0:0: [sda] 117210240 512-byte hardware sectors (60012 MB)
sd 0:0:0:0: [sda] Write Protect is off
sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't
support DPO or FUA
sda: sda1 sda2 sda3
sd 0:0:0:0: [sda] Attached SCSI disk
sd 0:0:0:0: Attached scsi generic sg0 type 0
scsi 1:0:0:0: CD-ROM HL-DT-ST DVD+-RW GSA-H73N B103 PQ: 0 ANSI: 5
sr0: scsi3-mmc drive: 48x/48x writer cd/rw xa/form2 cdda tray
sr 1:0:0:0: Attached scsi CD-ROM sr0
sr 1:0:0:0: Attached scsi generic sg1 type 5
scsi6 : SCSI emulation for USB Mass Storage devices
EXT3-fs: mounted filesystem with ordered data mode.
scsi 6:0:0:0: Direct-Access TEAC USB HS-CF Card 4.08 PQ: 0 ANSI: 0
sd 6:0:0:0: [sdb] Attached SCSI removable disk
sd 6:0:0:0: Attached scsi generic sg2 type 0
Andy
>
> Boris
>
> --- On Wed, 12/3/08, Andrew Lyon <andrew.lyon@gmail.com> wrote:
>
> From: Andrew Lyon <andrew.lyon@gmail.com>
> Subject: Re: pv_ops dom0 testing
> To: bderzhavets@yahoo.com, deshantm@gmail.com, "Jeremy Fitzhardinge"
> <jeremy@goop.org>, xen-devel@lists.xensource.com
> Date: Wednesday, December 3, 2008, 1:03 PM
>
> Boris,
>
> It does support ahci, and it works with other kernels, the problem is
> that I am testing pvops dom0 kernel and it does not work with that.
>
> I included the same drivers I use successfully with other kernels, the
> problem is with the pvops dom0 kernel.
>
> Andy
>
> On 03/12/2008, Boris Derzhavets <bderzhavets@yahoo.com> wrote:
>>
>>
>> --- On Wed, 12/3/08, Andrew Lyon
> <andrew.lyon@gmail.com> wrote:
>> From: Andrew Lyon <andrew.lyon@gmail.com>
>> Subject: Re: [Xen-devel] pv_ops dom0 testing
>> To: deshantm@gmail.com
>> Cc: "Jeremy Fitzhardinge" <jeremy@goop.org>,
> xen-devel@lists.xensource.com
>> Date: Wednesday, December 3, 2008, 12:10 PM
>>
>> On Wed, Dec 3, 2008 at 4:43 PM, Todd Deshane <deshantm@gmail.com>
> wrote:
>>>
>>>
>>>> I had the system setup to output to serial and vga console
>>>> (console=vga,com1) but it seems that the vga console only displays
> Xen
>>>> debug messages,
>>>
>>> Here is my grub debug setup for reference
>>>
>>> title Xen 3.4-unstable DEBUG/ Ubuntu 8.10, kernel
> 2.6.28-rc6-tip
>>> root (hd0,0)
>>> kernel /boot/xen-3.4-unstable.gz loglvl=all guest_loglvl=all
>>> com1=115200,8n1 console=com1
> mem=3G
>>> module /boot/vmlinuz-2.6.28-rc6-tip root=/dev/sda1 ro
>> console=hvc0
>>> earlyprintk=xen xencons=ttyS0,115200 nousb
>>> module /boot/initrd.img-2.6.28-rc6-tip
>>>
>>>
>>>>
>>>> I hooked up a null modem cable and I've now captured
>>>> the full xen and linux dmesg, it appears that the onboard intel
> ahci
>>>> sata is not working so the kernel is unable to run init:
>>>>
>>>> __ __ _____ _____ ___
>>>>
>>>> \ \/ /___ _ __ |___ / |___ / / _ \
>>>>
>>>> \ // _ \ '_ \ |_ \ |_ \| | | |
>>>>
>>>> / \ __/ | | | ___) | ___) | |_| |
>>>>
>>>> /_/\_\___|_| |_| |____(_)____(_)___/
>>>>
>>>>
>>>>
>>>> (XEN) Xen version 3.3.0 (root@(none)) (gcc version 4.1.2
> (Gentoo
> 4.1.2
>>>> p1.0.2)) Tue Dec 2 15:55:55 GMT 2008
>>>>
>>>> (XEN) Latest ChangeSet: unavailable
>>>>
>>>> (XEN) Command line: com1=115200,8n1 console=vga,com1
>>>>
>>>> (XEN) Video information:
>>>>
>>>> (XEN) VGA is text mode 80x25, font 8x16
>>>>
>>>> (XEN) VBE/DDC methods: V2; EDID transfer time: 1 seconds
>>>>
>>>> (XEN) Disc information:
>>>>
>>>> (XEN) Found 1 MBR signatures
>>>>
>>>> (XEN) Found 1 EDD information structures
>>>>
>>>> (XEN) Xen-e820 RAM map:
>>>>
>>>> (XEN) 0000000000000000 - 000000000009ec00 (usable)
>>>>
>>>> (XEN) 00000000000f0000 - 0000000000100000 (reserved)
>>>>
>>>> (XEN) 0000000000100000 - 00000000cfdff800
> (usable)
>>>>
>>>> (XEN) 00000000cfdff800 - 00000000cfe53c00 (ACPI NVS)
>>>>
>>>> (XEN) 00000000cfe53c00 - 00000000cfe55c00 (ACPI data)
>>>>
>>>> (XEN) 00000000cfe55c00 - 00000000d0000000 (reserved)
>>>>
>>>> (XEN) 00000000e0000000 - 00000000f0000000 (reserved)
>>>>
>>>> (XEN) 00000000fec00000 - 00000000fed00400 (reserved)
>>>>
>>>> (XEN) 00000000fed20000 - 00000000feda0000 (reserved)
>>>>
>>>> (XEN) 00000000fee00000 - 00000000fef00000 (reserved)
>>>>
>>>> (XEN) 00000000ffb00000 - 0000000100000000 (reserved)
>>>>
>>>> (XEN) 0000000100000000 - 0000000128000000 (usable)
>>>>
>>>> (XEN) System RAM: 3965MB (4060788kB)
>>>>
>>>> (XEN) ACPI: RSDP 000FEC00, 0024 (r2 DELL )
>>>>
>>>> (XEN)
> ACPI: XSDT 000FC5B3, 008C (r1 DELL B9K 15 ASL
>>>> 61)
>>>>
>>>> (XEN) ACPI: FACP 000FC6E3, 00F4 (r3 DELL B9K 15 ASL
>>>> 61)
>>>>
>>>> (XEN) ACPI: DSDT FFF76B39, 4596 (r1 DELL dt_ex 1000 INTL
>>>> 20050624)
>>>>
>>>> (XEN) ACPI: FACS CFDFF800, 0040
>>>>
>>>> (XEN) ACPI: SSDT FFF7B1EE, 00AA (r1 DELL st_ex 1000 INTL
>>>> 20050624)
>>>>
>>>> (XEN) ACPI: APIC 000FC7D7, 0092 (r1 DELL B9K 15 ASL
>>>> 61)
>>>>
>>>> (XEN) ACPI: BOOT 000FC869, 0028 (r1 DELL B9K 15 ASL
>>>> 61)
>>>>
>>>> (XEN) ACPI: ASF! 000FC891, 0096 (r32 DELL B9K 15 ASL
>>>> 61)
>>>>
>>>> (XEN) ACPI: MCFG 000FC927, 003E (r1 DELL B9K 15
> ASL
>>>> 61)
>>>>
>>>> (XEN) ACPI: HPET 000FC965, 0038 (r1 DELL B9K 15 ASL
>>>> 61)
>>>>
>>>> (XEN) ACPI: TCPA 000FCBC1, 0032 (r1 DELL B9K 15 ASL
>>>> 61)
>>>>
>>>> (XEN) ACPI: DMAR 000FCBF3, 00D0 (r1 DELL B9K 15 ASL
>>>> 61)
>>>>
>>>> (XEN) ACPI: SLIC 000FC99D, 0176 (r1 DELL B9K 15 ASL
>>>> 61)
>>>>
>>>> (XEN) ACPI: SSDT CFDFF840, 01F9 (r1 DpgPmm Cpu0Ist 11 INTL
>>>> 20050624)
>>>>
>>>> (XEN) ACPI: SSDT CFDFFC49, 01F9 (r1 DpgPmm Cpu1Ist 11 INTL
>>>> 20050624)
>>>>
>>>> (XEN) ACPI: SSDT CFE00052, 0140 (r1 DpgPmm CpuPm 10 INTL
>>>> 20050624)
>>>>
>>>> (XEN) Xen heap: 14MB (14632kB)
>>>>
>>>>
> (XEN) Domain heap initialised
>>>>
>>>> (XEN) Processor #0 6:15 APIC version 20
>>>>
>>>> (XEN) Processor #1 6:15 APIC version 20
>>>>
>>>> (XEN) IOAPIC[0]: apic_id 8, version 32, address 0xfec00000, GSI
> 0-23
>>>>
>>>> (XEN) Enabling APIC mode: Flat. Using 1 I/O APICs
>>>>
>>>> (XEN) Using scheduler: SMP Credit Scheduler (credit)
>>>>
>>>> (XEN) Detected 2394.042 MHz processor.
>>>>
>>>> (XEN) HVM: VMX enabled
>>>>
>>>> (XEN) CPU0: Intel(R) Core(TM)2 CPU 6600 @ 2.40GHz
> stepping
>> 06
>>>>
>>>> (XEN) Booting processor 1/1 eip 8c000
>>>>
>>>> (XEN) CPU1: Intel(R) Core(TM)2 CPU 6600 @ 2.40GHz
> stepping
>> 06
>>>>
>>>> (XEN) Total of 2 processors
> activated.
>>>>
>>>> (XEN) ENABLING IO-APIC IRQs
>>>>
>>>> (XEN) -> Using new ACK method
>>>>
>>>> (XEN) checking TSC synchronization across 2 CPUs: passed.
>>>>
>>>> (XEN) Platform timer is 14.318MHz HPET
>>>>
>>>> (XEN) Brought up 2 CPUs
>>>>
>>>> (XEN) I/O virtualisation disabled
>>>>
>>>> (XEN) *** LOADING DOMAIN 0 ***
>>>>
>>>> (XEN) Xen kernel: 64-bit, lsb, compat32
>>>>
>>>> (XEN) Dom0 kernel: 64-bit, PAE, lsb, paddr 0x200000 ->
> 0x777e68
>>>>
>>>> (XEN) PHYSICAL MEMORY ARRANGEMENT:
>>>>
>>>> (XEN) Dom0 alloc.: 0000000123000000->0000000124000000
> (958126
>> pages
>>>> to be allocated)
>>>>
>>>> (XEN) VIRTUAL MEMORY
> ARRANGEMENT:
>>>>
>>>> (XEN) Loaded kernel: ffffffff80200000->ffffffff80777e68
>>>>
>>>> (XEN) Init. ramdisk: ffffffff80778000->ffffffff80778000
>>>>
>>>> (XEN) Phys-Mach map: ffffffff80778000->ffffffff80ecf570
>>>>
>>>> (XEN) Start info: ffffffff80ed0000->ffffffff80ed04a4
>>>>
>>>> (XEN) Page tables: ffffffff80ed1000->ffffffff80edc000
>>>>
>>>> (XEN) Boot stack: ffffffff80edc000->ffffffff80edd000
>>>>
>>>> (XEN) TOTAL: ffffffff80000000->ffffffff81000000
>>>>
>>>> (XEN) ENTRY ADDRESS: ffffffff8064f200
>>>>
>>>> (XEN) Dom0 has maximum 2 VCPUs
>>>>
>>>> (XEN) Scrubbing Free RAM: .done.
>>>>
>>>> (XEN) Xen trace buffers: disabled
>>>>
>>>> (XEN) Std.
> Loglevel: Errors and warnings
>>>>
>>>> (XEN) Guest Loglevel: Nothing (Rate-limited: Errors and warnings)
>>>>
>>>> (XEN) Xen is relinquishing VGA console.
>>>>
>>>> (XEN) *** Serial input -> DOM0 (type 'CTRL-a' three
> times
>> to switch
>>>> input to Xen)
>>>>
>>>> (XEN) Freed 108kB init memory.
>>>>
>>>> mapping kernel into physical memory
>>>>
>>>> Xen: setup ISA identity maps
>>>>
>>>> about to get started...
>>>>
>>>> PAT disabled on Xen
>>>>
>>>> Linux version 2.6.28-rc6-tip (root@optiplex755) (gcc version 4.1.2
>>>> (Gentoo 4.1.2 p1.0.2)) #2 SMP Wed Dec 3 15:24:08 GMT 2008
>>>>
>>>> Command line: root=/dev/sda2 console=hvc0 earlyprintk=xen
>>>>
>>>> KERNEL supported
> cpus:
>>>>
>>>> Intel GenuineIntel
>>>>
>>>> AMD AuthenticAMD
>>>>
>>>> Centaur CentaurHauls
>>>>
>>>> BIOS-provided physical RAM map:
>>>>
>>>> Xen: 0000000000000000 - 00000000000a0000 (usable)
>>>>
>>>> Xen: 00000000000a0000 - 0000000000100000 (reserved)
>>>>
>>>> Xen: 0000000000100000 - 0000000000778000 (usable)
>>>>
>>>> Xen: 0000000000778000 - 0000000000ed1000 (reserved)
>>>>
>>>> Xen: 0000000000ed1000 - 00000000eaeae000 (usable)
>>>>
>>>> console [xenboot0] enabled
>>>>
>>>> DMI 2.5 present.
>>>>
>>>> last_pfn = 0xeaeae max_arch_pfn = 0x3ffffffff
>>>>
>>>> init_memory_mapping: 0000000000000000-00000000eaeae000
>>>>
>>>> last_map_addr:
> eaeae000 end: eaeae000
>>>>
>>>> ACPI: RSDP 000FEC00, 0024 (r2 DELL )
>>>>
>>>> ACPI: XSDT 000FC5B3, 008C (r1 DELL B9K 15 ASL
> 61)
>>>>
>>>> ACPI: FACP 000FC6E3, 00F4 (r3 DELL B9K 15 ASL
> 61)
>>>>
>>>> ACPI: DSDT FFF76B39, 4596 (r1 DELL dt_ex 1000 INTL
> 20050624)
>>>>
>>>> ACPI: FACS CFDFF800, 0040
>>>>
>>>> ACPI: SSDT FFF7B1EE, 00AA (r1 DELL st_ex 1000 INTL
> 20050624)
>>>>
>>>> ACPI: APIC 000FC7D7, 0092 (r1 DELL B9K 15 ASL
> 61)
>>>>
>>>> ACPI: BOOT 000FC869, 0028 (r1 DELL B9K 15 ASL
> 61)
>>>>
>>>> ACPI: ASF! 000FC891, 0096 (r32 DELL B9K 15 ASL
> 61)
>>>>
>>>> ACPI: MCFG 000FC927, 003E (r1 DELL B9K
> 15 ASL
> 61)
>>>>
>>>> ACPI: HPET 000FC965, 0038 (r1 DELL B9K 15 ASL
> 61)
>>>>
>>>> ACPI: TCPA 000FCBC1, 0032 (r1 DELL B9K 15 ASL
> 61)
>>>>
>>>> ACPI: DMAR 000FCBF3, 00D0 (r1 DELL B9K 15 ASL
> 61)
>>>>
>>>> ACPI: SLIC 000FC99D, 0176 (r1 DELL B9K 15 ASL
> 61)
>>>>
>>>> ACPI: SSDT CFDFF840, 01F9 (r1 DpgPmm Cpu0Ist 11 INTL
> 20050624)
>>>>
>>>> ACPI: SSDT CFDFFC49, 01F9 (r1 DpgPmm Cpu1Ist 11 INTL
> 20050624)
>>>>
>>>> ACPI: SSDT CFE00052, 0140 (r1 DpgPmm CpuPm 10 INTL
> 20050624)
>>>>
>>>> ACPI: DMI detected: Dell OptiPlex 755
>>>>
>>>> (5 early reservations) ==> bootmem [0000000000 - 00eaeae000]
>>>>
>>>> #0
> [0000000000 - 0000001000] BIOS data page ==> [0000000000
> -
>>>> 0000001000]
>>>>
>>>> #1 [0000006000 - 0000008000] TRAMPOLINE ==> [0000006000
> -
>>>> 0000008000]
>>>>
>>>> #2 [0000ed1000 - 0000edc000] XEN PAGETABLES ==> [0000ed1000
> -
>>>> 0000edc000]
>>>>
>>>> #3 [0000200000 - 0000777e68] TEXT DATA BSS ==> [0000200000
> -
>>>> 0000777e68]
>>>>
>>>> #4 [0000edc000 - 000162b000] PGTABLE ==> [0000edc000
> -
>>>> 000162b000]
>>>>
>>>> found SMP MP-table at [ffff8800000fe710] 000fe710
>>>>
>>>> Zone PFN ranges:
>>>>
>>>> DMA 0x00000000 -> 0x00001000
>>>>
>>>> DMA32 0x00001000 -> 0x00100000
>>>>
>>>> Normal 0x00100000 ->
> 0x00100000
>>>>
>>>> Movable zone start PFN for each node
>>>>
>>>> early_node_map[3] active PFN ranges
>>>>
>>>> 0: 0x00000000 -> 0x000000a0
>>>>
>>>> 0: 0x00000100 -> 0x00000778
>>>>
>>>> 0: 0x00000ed1 -> 0x000eaeae
>>>>
>>>> ACPI: PM-Timer IO Port: 0x808
>>>>
>>>> ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
>>>>
>>>> ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled)
>>>>
>>>> ACPI: LAPIC (acpi_id[0x03] lapic_id[0x05] disabled)
>>>>
>>>> ACPI: LAPIC (acpi_id[0x04] lapic_id[0x07] disabled)
>>>>
>>>> ACPI: LAPIC (acpi_id[0x05] lapic_id[0x00] disabled)
>>>>
>>>> ACPI: LAPIC (acpi_id[0x06] lapic_id[0x01] disabled)
>>>>
>>>> ACPI: LAPIC
> (acpi_id[0x07] lapic_id[0x02] disabled)
>>>>
>>>> ACPI: LAPIC (acpi_id[0x08] lapic_id[0x03] disabled)
>>>>
>>>> ACPI: LAPIC_NMI (acpi_id[0xff] high level lint[0x1])
>>>>
>>>> ACPI: IOAPIC (id[0x08] address[0xfec00000] gsi_base[0])
>>>>
>>>> IOAPIC[0]: apic_id 8, version 0, address 0xfec00000, GSI 0-23
>>>>
>>>> ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
>>>>
>>>> ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
>>>>
>>>> ACPI: HPET id: 0x8086a301 base: 0xfed00000
>>>>
>>>> Using ACPI (MADT) for SMP configuration information
>>>>
>>>> SMP: Allowing 2 CPUs, 0 hotplug CPUs
>>>>
>>>> (XEN) ioapic_guest_write: apic=0, pin=2, old_irq=0, new_irq=-1
>>>>
>>>> (XEN) ioapic_guest_write:
> old_entry=000009f0, new_entry=00010900
>>>>
>>>> (XEN) ioapic_guest_write: Attempt to remove IO-APIC pin of in-use
> IRQ!
>>>>
>>>> (XEN) ioapic_guest_write: apic=0, pin=4, old_irq=4, new_irq=-1
>>>>
>>>> (XEN) ioapic_guest_write: old_entry=000009f1, new_entry=00010900
>>>>
>>>> (XEN) ioapic_guest_write: Attempt to remove IO-APIC pin of in-use
> IRQ!
>>>>
>>>> Allocating PCI resources starting at ec000000 (gap:
> eaeae000:15152000)
>>>>
>>>> PERCPU: Allocating 57344 bytes of per cpu data
>>>>
>>>> Built 1 zonelists in Zone order, mobility grouping on. Total
> pages:
>>>> 945674
>>>>
>>>> Kernel command line: root=/dev/sda2 console=hvc0 earlyprintk=xen
>>>>
>>>> Initializing CPU#0
>>>>
>>>> xen: allocated irq 9 for acpi
> 9
>>>>
>>>> PID hash table entries: 4096 (order: 12, 32768 bytes)
>>>>
>>>> Detected 2394.042 MHz processor.
>>>>
>>>> Console: colour dummy device 80x25
>>>>
>>>> console handover: boot [xenboot0] -> real [hvc0]
>>>>
>>>> Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes)
>>>>
>>>> Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes)
>>>>
>>>> Checking aperture...
>>>>
>>>> No AGP bridge found
>>>>
>>>> PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
>>>>
>>>> Placing software IO TLB between 0x51ca000 - 0x91ca000
>>>>
>>>> Memory: 3701108k/3848888k available (2519k kernel code, 7908k
> absent,
>>>> 139388k reserved, 1546k data, 420k
> init)
>>>>
>>>> installing Xen timer for CPU 0
>>>>
>>>> Calibrating delay loop (skipped), value calculated using timer
>>>> frequency.. 4788.08 BogoMIPS (lpj=9576168)
>>>>
>>>> Mount-cache hash table entries: 256
>>>>
>>>> CPU: L1 I cache: 32K, L1 D cache: 32K
>>>>
>>>> CPU: L2 cache: 4096K
>>>>
>>>> CPU: Physical Processor ID: 0
>>>>
>>>> CPU: Processor Core ID: 0
>>>>
>>>> SMP alternatives: switching to UP code
>>>>
>>>> ACPI: Core revision 20080926
>>>>
>>>> cpu 0 spinlock event irq 17
>>>>
>>>> installing Xen timer for CPU 1
>>>>
>>>> cpu 1 spinlock event irq 23
>>>>
>>>> SMP alternatives: switching to SMP code
>>>>
>>>> Initializing
> CPU#1
>>>>
>>>> CPU: L1 I cache: 32K, L1 D cache: 32K
>>>>
>>>> CPU: L2 cache: 4096K
>>>>
>>>> CPU: Physical Processor ID: 0
>>>>
>>>> CPU: Processor Core ID: 0
>>>>
>>>> Brought up 2 CPUs
>>>>
>>>> net_namespace: 552 bytes
>>>>
>>>> Booting paravirtualized kernel on Xen
>>>>
>>>> Xen version: 3.3.0 (preserve-AD) (dom0)
>>>>
>>>> Grant table initialized
>>>>
>>>> NET: Registered protocol family 16
>>>>
>>>> xenbus_probe_init ok
>>>>
>>>> ACPI FADT declares the system doesn't support PCIe ASPM, so
>> disable it
>>>>
>>>> ACPI: bus type pci registered
>>>>
>>>> PCI: Using configuration type 1 for base access
>>>>
>>>> ACPI:
> Interpreter enabled
>>>>
>>>> ACPI: (supports S0 S5)
>>>>
>>>> ACPI: Using IOAPIC for interrupt routing
>>>>
>>>> ACPI: ACPI Dock Station Driver: 1 docks/bays found
>>>>
>>>> ACPI: PCI Root Bridge [PCI0] (0000:00)
>>>>
>>>> pci 0000:00:01.0: PME# supported from D0 D3hot D3cold
>>>>
>>>> pci 0000:00:01.0: PME# disabled
>>>>
>>>> pci 0000:00:03.0: PME# supported from D0 D3hot D3cold
>>>>
>>>> pci 0000:00:03.0: PME# disabled
>>>>
>>>> pci 0000:00:19.0: PME# supported from D0 D3hot D3cold
>>>>
>>>> pci 0000:00:19.0: PME# disabled
>>>>
>>>> pci 0000:00:1a.7: PME# supported from D0 D3hot D3cold
>>>>
>>>> pci 0000:00:1a.7: PME# disabled
>>>>
>>>> pci 0000:00:1b.0: PME# supported
> from D0 D3hot D3cold
>>>>
>>>> pci 0000:00:1b.0: PME# disabled
>>>>
>>>> pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
>>>>
>>>> pci 0000:00:1c.0: PME# disabled
>>>>
>>>> pci 0000:00:1d.7: PME# supported from D0 D3hot D3cold
>>>>
>>>> pci 0000:00:1d.7: PME# disabled
>>>>
>>>> pci 0000:00:1f.0: quirk: region 0800-087f claimed by ICH6
>> ACPI/GPIO/TCO
>>>>
>>>> pci 0000:00:1f.0: quirk: region 0880-08bf claimed by ICH6 GPIO
>>>>
>>>> pci 0000:00:1f.2: PME# supported from D3hot
>>>>
>>>> pci 0000:00:1f.2: PME# disabled
>>>>
>>>> pci 0000:00:1e.0: transparent bridge
>>>>
>>>> ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 9 10 *11 12 15)
>>>>
>>>> ACPI: PCI Interrupt Link [LNKB] (IRQs
> 3 4 *5 6 7 9 10 11 12 15)
>>>>
>>>> ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 7 *9 10 11 12 15)
>>>>
>>>> ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 9 *10 11 12 15)
>>>>
>>>> ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 9 10 11 12 15) *0,
>>>> disabled.
>>>>
>>>> ACPI: PCI Interrupt Link [LNKF] (IRQs *3 4 5 6 7 9 10 11 12 15)
>>>>
>>>> ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 *5 6 7 9 10 11 12 15)
>>>>
>>>> ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 7 9 *10 11 12 15)
>>>>
>>>> ACPI Warning (tbutils-0217): Incorrect checksum in table [TCPA] -
> 00,
>>>> should be 87 [20080926]
>>>>
>>>> xen_balloon: Initialising balloon driver.
>>>>
>>>> SCSI subsystem initialized
>>>>
>>>> PCI: Using ACPI for IRQ
> routing
>>>>
>>>> pci 0000:00:01.0: BAR 9: can't allocate resource
>>>>
>>>> pci 0000:01:00.0: BAR 0: can't allocate resource
>>>>
>>>> Xen: Initializing Xen DMA ops
>>>>
>>>> Xen: Enabling DMA fallback to swiotlb
>>>>
>>>> PCI-GART: No AMD GART found.
>>>>
>>>> pnp: PnP ACPI init
>>>>
>>>> ACPI: bus type pnp registered
>>>>
>>>> pnp 00:01: io resource (0x800-0x85f) overlaps 0000:00:1f.0 BAR 7
>>>> (0x800-0x87f), disabling
>>>>
>>>> pnp 00:01: io resource (0x860-0x8ff) overlaps 0000:00:1f.0 BAR 7
>>>> (0x800-0x87f), disabling
>>>>
>>>> system 00:01: ioport range 0xc00-0xc7f has been reserved
>>>>
>>>> xen_set_ioapic_routing: irq 13 gsi 13 vector 120 ioapic 0 pin 13
>>>> triggering 1
> polarity 0
>>>>
>>>> xen_set_ioapic_routing: irq 8 gsi 8 vector 80 ioapic 0 pin 8
>>>> triggering 1 polarity 0
>>>>
>>>> xen_set_ioapic_routing: irq 7 gsi 7 vector 72 ioapic 0 pin 7
>>>> triggering 1 polarity 0
>>>>
>>>> xen_set_ioapic_routing: irq 4 gsi 4 vector 241 ioapic 0 pin 4
>>>> triggering 1 polarity 0
>>>>
>>>> (XEN) ioapic_guest_write: apic=0, pin=4, old_irq=4, new_irq=4
>>>>
>>>> (XEN) ioapic_guest_write: old_entry=000009f1, new_entry=000189f1
>>>>
>>>> (XEN) ioapic_guest_write: Attempt to modify IO-APIC pin for in-use
>> IRQ!
>>>>
>>>> pnp: PnP ACPI: found 9 devices
>>>>
>>>> ACPI: ACPI bus type pnp unregistered
>>>>
>>>> pci 0000:00:01.0: PCI bridge, secondary bus 0000:01
>>>>
>>>> pci
> 0000:00:01.0: IO window: 0xd000-0xdfff
>>>>
>>>> pci 0000:00:01.0: MEM window: 0xfe900000-0xfeafffff
>>>>
>>>> pci 0000:00:01.0: PREFETCH window:
> 0x00000100000000-0x0000010fffffff
>>>>
>>>> pci 0000:00:1c.0: PCI bridge, secondary bus 0000:02
>>>>
>>>> pci 0000:00:1c.0: IO window: disabled
>>>>
>>>> pci 0000:00:1c.0: MEM window: 0xfe800000-0xfe8fffff
>>>>
>>>> pci 0000:00:1c.0: PREFETCH window: disabled
>>>>
>>>> pci 0000:00:1e.0: PCI bridge, secondary bus 0000:03
>>>>
>>>> pci 0000:00:1e.0: IO window: disabled
>>>>
>>>> pci 0000:00:1e.0: MEM window: disabled
>>>>
>>>> pci 0000:00:1e.0: PREFETCH window: disabled
>>>>
>>>> xen_set_ioapic_routing: irq 29 gsi 16 vector 152 ioapic 0 pin
> 16
>>>> triggering 0 polarity 1
>>>>
>>>> pci 0000:00:01.0: PCI INT A -> GSI 16 (level, low) -> IRQ 29
>>>>
>>>> xen: PCI device 0000:00:01.0 pin 1 -> irq 29
>>>>
>>>> xen_allocate_pirq: returning irq 29 for gsi 16
>>>>
>>>> xen_set_ioapic_routing: irq 29 gsi 16 vector 152 ioapic 0 pin 16
>>>> triggering 0 polarity 1
>>>>
>>>> pci 0000:00:1c.0: PCI INT A -> GSI 16 (level, low) -> IRQ 29
>>>>
>>>> xen: PCI device 0000:00:1c.0 pin 1 -> irq 29
>>>>
>>>> bus: 00 index 0 io port: [0x00-0xffff]
>>>>
>>>> bus: 00 index 1 mmio: [0x000000-0xffffffffffffffff]
>>>>
>>>> bus: 01 index 0 io port: [0xd000-0xdfff]
>>>>
>>>> bus: 01 index 1 mmio: [0xfe900000-0xfeafffff]
>>>>
>>>> bus: 01
> index 2 mmio: [0x100000000-0x10fffffff]
>>>>
>>>> bus: 01 index 3 mmio: [0x0-0x0]
>>>>
>>>> bus: 02 index 0 mmio: [0x0-0x0]
>>>>
>>>> bus: 02 index 1 mmio: [0xfe800000-0xfe8fffff]
>>>>
>>>> bus: 02 index 2 mmio: [0x0-0x0]
>>>>
>>>> bus: 02 index 3 mmio: [0x0-0x0]
>>>>
>>>> bus: 03 index 0 mmio: [0x0-0x0]
>>>>
>>>> bus: 03 index 1 mmio: [0x0-0x0]
>>>>
>>>> bus: 03 index 2 mmio: [0x0-0x0]
>>>>
>>>> bus: 03 index 3 io port: [0x00-0xffff]
>>>>
>>>> bus: 03 index 4 mmio: [0x000000-0xffffffffffffffff]
>>>>
>>>> NET: Registered protocol family 2
>>>>
>>>> IP route cache hash table entries: 131072 (order: 8, 1048576
> bytes)
>>>>
>>>> TCP established hash table entries: 262144
> (order: 10, 4194304
> bytes)
>>>>
>>>> TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
>>>>
>>>> TCP: Hash tables configured (established 262144 bind 65536)
>>>>
>>>> TCP reno registered
>>>>
>>>> NET: Registered protocol family 1
>>>>
>>>> Simple Boot Flag at 0x7a set to 0x1
>>>>
>>>> Installing knfsd (copyright (C) 1996 okir@monad.swb.de).
>>>>
>>>> msgmni has been set to 7517
>>>>
>>>> io scheduler noop registered
>>>>
>>>> io scheduler cfq registered (default)
>>>>
>>>> pcieport-driver 0000:00:01.0: found MSI capability
>>>>
>>>> pcieport-driver 0000:00:1c.0: found MSI capability
>>>>
>>>> input: Power Button (FF) as /class/input/input0
>>>>
>>>> ACPI:
> Power Button (FF) [PWRF]
>>>>
>>>> input: Power Button (CM) as /class/input/input1
>>>>
>>>> ACPI: Power Button (CM) [VBTN]
>>>>
>>>> xenbus_probe_backend_init bus registered ok
>>>>
>>>> xenbus_probe_frontend_init bus registered ok
>>>>
>>>> Event-channel device installed.
>>>>
>>>> ***blkif_init
>>>>
>>>> Real Time Clock Driver v1.12ac
>>>>
>>>> Linux agpgart interface v0.103
>>>>
>>>> floppy0: Unable to grab IRQ6 for the floppy driver
>>>>
>>>> brd: module loaded
>>>>
>>>> loop: module loaded
>>>>
>>>> tun: Universal TUN/TAP device driver, 1.6
>>>>
>>>> tun: (C) 1999-2004 Max Krasnyansky <maxk@qualcomm.com>
>>>>
>>>> console [netcon0]
> enabled
>>>>
>>>> netconsole: network logging started
>>>>
>>>> Driver 'sd' needs updating - please use bus_type methods
>>>>
>>>> Driver 'sr' needs updating - please use bus_type methods
>>>>
>>>> xen_set_ioapic_routing: irq 31 gsi 18 vector 160 ioapic 0 pin 18
>>>> triggering 0 polarity 1
>>>>
>>>> ahci 0000:00:1f.2: PCI INT C -> GSI 18 (level, low) -> IRQ
> 31
>>>>
>>>> xen: PCI device 0000:00:1f.2 pin 3 -> irq 31
>>>>
>>>> ahci 0000:00:1f.2: AHCI 0001.0200 32 slots 6 ports 3 Gbps 0x27
> impl
>> SATA
>>>> mode
>>>>
>>>> ahci 0000:00:1f.2: flags: 64bit ncq sntf pm led clo pmp pio slum
> part
>> ems
>>>>
>>>> (XEN) unexpected IRQ trap at vector 59
>>>>
>>>> (XEN) unexpected IRQ trap at vector
> 59
>>>>
>>>> scsi0 : ahci
>>>>
>>>> scsi1 : ahci
>>>>
>>>> scsi2 : ahci
>>>>
>>>> scsi3 : ahci
>>>>
>>>> scsi4 : ahci
>>>>
>>>> scsi5 : ahci
>>>>
>>>> ata1: SATA max UDMA/133 abar m2048@0xff970000 port 0xff970100 irq
> 1277
>>>>
>>>> ata2: SATA max UDMA/133 abar m2048@0xff970000 port 0xff970180 irq
> 1277
>>>>
>>>> ata3: SATA max UDMA/133 abar m2048@0xff970000 port 0xff970200 irq
> 1277
>>>>
>>>> ata4: DUMMY
>>>>
>>>> ata5: DUMMY
>>>>
>>>> ata6: SATA max UDMA/133 abar m2048@0xff970000 port 0xff970380 irq
> 1277
>>>>
>>>> (XEN) unexpected IRQ trap at vector 59
>>>>
>>>> ata1: SATA link up 1.5 Gbps (SStatus 113 SControl
> 300)
>>>>
>>>> (XEN) unexpected IRQ trap at vector 59
>>>>
>>>> ata1.00: qc timeout (cmd 0xec)
>>>>
>>>> ata1.00: failed to IDENTIFY (I/O error, err_mask=0x4)
>>>>
>>>> (XEN) unexpected IRQ trap at vector 59
>>>>
>>>> ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
>>>>
>>>> (XEN) unexpected IRQ trap at vector 59
>>>>
>>>> ata1.00: qc timeout (cmd 0xec)
>>>>
>>>> ata1.00: failed to IDENTIFY (I/O error, err_mask=0x4)
>>>>
>>>> (XEN) unexpected IRQ trap at vector 59
>>>>
>>>> ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
>>>>
>>>> (XEN) unexpected IRQ trap at vector 59
>>>>
>>>> ata1.00: qc timeout (cmd 0xec)
>>>>
>>>> ata1.00: failed to IDENTIFY (I/O error,
> err_mask=0x4)
>>>>
>>>> (XEN) unexpected IRQ trap at vector 59
>>>>
>>>> ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
>>>>
>>>> ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
>>>>
>>>> (XEN) unexpected IRQ trap at vector 59
>>>>
>>>> ata2.00: qc timeout (cmd 0xa1)
>>>>
>>>> ata2.00: failed to IDENTIFY (I/O error, err_mask=0x4)
>>>>
>>>> ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
>>>>
>>>> (XEN) unexpected IRQ trap at vector 59
>>>>
>>>> ata2.00: qc timeout (cmd 0xa1)
>>>>
>>>> ata2.00: failed to IDENTIFY (I/O error, err_mask=0x4)
>>>>
>>>> ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
>>>>
>>>> (XEN) unexpected IRQ trap at vector
> 59
>>>>
>>>> ata2.00: qc timeout (cmd 0xa1)
>>>>
>>>> ata2.00: failed to IDENTIFY (I/O error, err_mask=0x4)
>>>>
>>>> ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
>>>>
>>>> ata3: SATA link down (SStatus 4 SControl 300)
>>>>
>>>> ata6: SATA link down (SStatus 4 SControl 300)
>>>>
>>>> PNP: No PS/2 controller found. Probing ports directly.
>>>>
>>>> i8042: probe of i8042 failed with error -38
>>>>
>>>> mice: PS/2 mouse device common for all mice
>>>>
>>>> device-mapper: ioctl: 4.14.0-ioctl (2008-04-23) initialised:
>>>> dm-devel@redhat.com
>>>>
>>>> cpuidle: using governor ladder
>>>>
>>>> TCP cubic registered
>>>>
>>>> NET: Registered protocol family
> 17
>>>>
>>>> RPC: Registered udp transport module.
>>>>
>>>> RPC: Registered tcp transport module.
>>>>
>>>> IO APIC resources could be not be allocated.
>>>>
>>>> Root-NFS: No NFS server available, giving up.
>>>>
>>>> VFS: Unable to mount root fs via NFS, trying floppy.
>>>>
>>>> VFS: Insert root floppy and press ENTER
>>>>
>>>> Andy
>>>
>>> Looks like it is not detecting the drive correctly.
>>>
>>> What is your specific controller?
>>
>> The system is a Dell Optiplex 755 with Intel onboard sata, I'm having
>> trouble finding the controller model and lspci only shows that it is
>> AHCI:
>> *********************************************************************
>> When i open the box i can see the spec on South Bridge Chipset
>> and
> check with manual. Then enter setup and turn on AHCI, reboot
>> and load F8 for instance ( or just resque disk with 2.6.21 kernel)
>> to make sure Linux kernel loads AHCI driver to detect SATA HDD
>> Kernel 2.6.18 and above does detect AHCI mode on Intel's ICH(7,8,9)R,
>> but not ICH(6,7,8.9) per Intel Storage Matrix this ones don't support
>> AHCI.
>> *********************************************************************
>>
>> 00:1f.2 SATA controller: Intel Corporation 6 port SATA AHCI Controller
> (rev
>> 02)
>>
>> It is my Xen test server and has been running gentoo linux with both
>> vanilla kernel 2.6.27 (no xen) and 2.6.27+opensuse xen dom0 patches, I
>> wanted to start my pv_ops dom0 testing with a machine that I know can
>> run Xen successfully.
>>
>> The HD is a Toshiba 2.5" drive as that is all I had to hand when I
>> installed Gentoo Linux onto this machine,
> do you think its worth
>> swapping that for a 3.5"? I've got a raptor lying around
> somwhere...
>>
>> Andy
>>
>>
>>
>>>
>>> Cheers,
>>> Todd
>>>
>>> --
>>> Todd Deshane
>>> http://todddeshane.net
>>> http://runningxen.com
>>>
>>
>> _______________________________________________
>> Xen-devel mailing list
>> Xen-devel@lists.xensource.com
>> http://lists.xensource.com/xen-devel
>>
>>
>>
>>
>
> --
> Sent from my mobile device
>
>
^ permalink raw reply [flat|nested] 22+ messages in thread
* Re: pv_ops dom0 testing
2008-12-03 19:34 ` Andrew Lyon
@ 2008-12-03 19:39 ` Andrew Lyon
2008-12-03 20:16 ` Jeremy Fitzhardinge
1 sibling, 0 replies; 22+ messages in thread
From: Andrew Lyon @ 2008-12-03 19:39 UTC (permalink / raw)
To: bderzhavets; +Cc: deshantm, Jeremy Fitzhardinge, xen-devel
On Wed, Dec 3, 2008 at 7:34 PM, Andrew Lyon <andrew.lyon@gmail.com> wrote:
> On Wed, Dec 3, 2008 at 6:48 PM, Boris Derzhavets <bderzhavets@yahoo.com> wrote:
>> Andy,
>>
>> I am a bit confused , trying to follow up the thread running by Todd and
>> you.
>> Are this messages coming up on your box ?
>>
>> pci 0000:00:1f.0: quirk: region 0800-087f claimed by ICH6 ACPI/GPIO/TCO
>> pci 0000:00:1f.0: quirk: region 0880-08bf claimed by ICH6 GPIO
>
> Yes they are, along with several other messages that look bad:
Those messages are also present with 2.6.27.7:
pci 0000:00:1f.0: quirk: region 0800-087f claimed by ICH6 ACPI/GPIO/TCO
pci 0000:00:1f.0: quirk: region 0880-08bf claimed by ICH6 GPIO
Andy
>
> (XEN) ioapic_guest_write: apic=0, pin=4, old_irq=4, new_irq=4
> (XEN) ioapic_guest_write: old_entry=000009f1, new_entry=000189f1
> (XEN) ioapic_guest_write: Attempt to modify IO-APIC pin for in-use IRQ!
>
> (XEN) unexpected IRQ trap at vector 59
> ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
> (XEN) unexpected IRQ trap at vector 59
> ata1.00: qc timeout (cmd 0xec)
> ata1.00: failed to IDENTIFY (I/O error, err_mask=0x4)
> (XEN) unexpected IRQ trap at vector 59
> ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
> (XEN) unexpected IRQ trap at vector 59
> ata1.00: qc timeout (cmd 0xec)
>
> Kernel 2.6.27.7 vanilla or patched with opensuse xen dom0 patches
> detects the controller correctly using ahci driver:
>
> optiplex755 ~ # uname -a
> Linux optiplex755 2.6.27-xen-r3 #1 SMP Tue Dec 2 16:05:20 GMT 2008
> x86_64 Intel(R) Core(TM)2 CPU 6600 @ 2.40GHz GenuineIntel GNU/Linux
>
> optiplex755 ~ # lsscsi -H
> [0] ahci
> [1] ahci
> [2] ahci
> [3] ahci
> [4] ahci
> [5] ahci
> [6] usb-storage
>
> optiplex755 ~ # dmesg | grep -E "ahca|scsi|sd|ata"
> Command line: root=/dev/sda2 swiotlb=256 pciback.hide=(03:02.0) console=xvc0
> PERCPU: Allocating 43104 bytes of per cpu data
> Kernel command line: root=/dev/sda2 swiotlb=256 pciback.hide=(03:02.0)
> console=xvc0
> Memory: 3627084k/3847584k available (2956k kernel code, 212136k
> reserved, 1580k data, 264k init)
> libata version 3.00 loaded.
> Installing knfsd (copyright (C) 1996 okir@monad.swb.de).
> Driver 'sd' needs updating - please use bus_type methods
> scsi0 : ahci
> scsi1 : ahci
> scsi2 : ahci
> scsi3 : ahci
> scsi4 : ahci
> scsi5 : ahci
> ata1: SATA max UDMA/133 irq_stat 0x00000040, connection status changed irq 18
> ata2: SATA max UDMA/133 irq_stat 0x00000040, connection status changed irq 18
> ata3: SATA max UDMA/133 abar m2048@0xff970000 port 0xff970200 irq 18
> ata4: DUMMY
> ata5: DUMMY
> ata6: SATA max UDMA/133 abar m2048@0xff970000 port 0xff970380 irq 18
> ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
> ata1.00: ATA-7: TOSHIBA MK6034GSX, AH101A, max UDMA/100
> ata1.00: 117210240 sectors, multi 16: LBA48 NCQ (depth 31/32)
> ata1.00: configured for UDMA/100
> ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
> ata2.00: ATAPI: HL-DT-ST DVD+/-RW GSA-H73N, B103, max UDMA/100
> ata2.00: configured for UDMA/100
> ata3: SATA link down (SStatus 4 SControl 300)
> ata6: SATA link down (SStatus 4 SControl 300)
> scsi 0:0:0:0: Direct-Access ATA TOSHIBA MK6034GS AH10 PQ: 0 ANSI: 5
> sd 0:0:0:0: [sda] 117210240 512-byte hardware sectors (60012 MB)
> sd 0:0:0:0: [sda] Write Protect is off
> sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
> sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't
> support DPO or FUA
> sd 0:0:0:0: [sda] 117210240 512-byte hardware sectors (60012 MB)
> sd 0:0:0:0: [sda] Write Protect is off
> sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
> sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't
> support DPO or FUA
> sda: sda1 sda2 sda3
> sd 0:0:0:0: [sda] Attached SCSI disk
> sd 0:0:0:0: Attached scsi generic sg0 type 0
> scsi 1:0:0:0: CD-ROM HL-DT-ST DVD+-RW GSA-H73N B103 PQ: 0 ANSI: 5
> sr0: scsi3-mmc drive: 48x/48x writer cd/rw xa/form2 cdda tray
> sr 1:0:0:0: Attached scsi CD-ROM sr0
> sr 1:0:0:0: Attached scsi generic sg1 type 5
> scsi6 : SCSI emulation for USB Mass Storage devices
> EXT3-fs: mounted filesystem with ordered data mode.
> scsi 6:0:0:0: Direct-Access TEAC USB HS-CF Card 4.08 PQ: 0 ANSI: 0
> sd 6:0:0:0: [sdb] Attached SCSI removable disk
> sd 6:0:0:0: Attached scsi generic sg2 type 0
>
> Andy
>
>>
>> Boris
>>
>> --- On Wed, 12/3/08, Andrew Lyon <andrew.lyon@gmail.com> wrote:
>>
>> From: Andrew Lyon <andrew.lyon@gmail.com>
>> Subject: Re: pv_ops dom0 testing
>> To: bderzhavets@yahoo.com, deshantm@gmail.com, "Jeremy Fitzhardinge"
>> <jeremy@goop.org>, xen-devel@lists.xensource.com
>> Date: Wednesday, December 3, 2008, 1:03 PM
>>
>> Boris,
>>
>> It does support ahci, and it works with other kernels, the problem is
>> that I am testing pvops dom0 kernel and it does not work with that.
>>
>> I included the same drivers I use successfully with other kernels, the
>> problem is with the pvops dom0 kernel.
>>
>> Andy
>>
>> On 03/12/2008, Boris Derzhavets <bderzhavets@yahoo.com> wrote:
>>>
>>>
>>> --- On Wed, 12/3/08, Andrew Lyon
>> <andrew.lyon@gmail.com> wrote:
>>> From: Andrew Lyon <andrew.lyon@gmail.com>
>>> Subject: Re: [Xen-devel] pv_ops dom0 testing
>>> To: deshantm@gmail.com
>>> Cc: "Jeremy Fitzhardinge" <jeremy@goop.org>,
>> xen-devel@lists.xensource.com
>>> Date: Wednesday, December 3, 2008, 12:10 PM
>>>
>>> On Wed, Dec 3, 2008 at 4:43 PM, Todd Deshane <deshantm@gmail.com>
>> wrote:
>>>>
>>>>
>>>>> I had the system setup to output to serial and vga console
>>>>> (console=vga,com1) but it seems that the vga console only displays
>> Xen
>>>>> debug messages,
>>>>
>>>> Here is my grub debug setup for reference
>>>>
>>>> title Xen 3.4-unstable DEBUG/ Ubuntu 8.10, kernel
>> 2.6.28-rc6-tip
>>>> root (hd0,0)
>>>> kernel /boot/xen-3.4-unstable.gz loglvl=all guest_loglvl=all
>>>> com1=115200,8n1 console=com1
>> mem=3G
>>>> module /boot/vmlinuz-2.6.28-rc6-tip root=/dev/sda1 ro
>>> console=hvc0
>>>> earlyprintk=xen xencons=ttyS0,115200 nousb
>>>> module /boot/initrd.img-2.6.28-rc6-tip
>>>>
>>>>
>>>>>
>>>>> I hooked up a null modem cable and I've now captured
>>>>> the full xen and linux dmesg, it appears that the onboard intel
>> ahci
>>>>> sata is not working so the kernel is unable to run init:
>>>>>
>>>>> __ __ _____ _____ ___
>>>>>
>>>>> \ \/ /___ _ __ |___ / |___ / / _ \
>>>>>
>>>>> \ // _ \ '_ \ |_ \ |_ \| | | |
>>>>>
>>>>> / \ __/ | | | ___) | ___) | |_| |
>>>>>
>>>>> /_/\_\___|_| |_| |____(_)____(_)___/
>>>>>
>>>>>
>>>>>
>>>>> (XEN) Xen version 3.3.0 (root@(none)) (gcc version 4.1.2
>> (Gentoo
>> 4.1.2
>>>>> p1.0.2)) Tue Dec 2 15:55:55 GMT 2008
>>>>>
>>>>> (XEN) Latest ChangeSet: unavailable
>>>>>
>>>>> (XEN) Command line: com1=115200,8n1 console=vga,com1
>>>>>
>>>>> (XEN) Video information:
>>>>>
>>>>> (XEN) VGA is text mode 80x25, font 8x16
>>>>>
>>>>> (XEN) VBE/DDC methods: V2; EDID transfer time: 1 seconds
>>>>>
>>>>> (XEN) Disc information:
>>>>>
>>>>> (XEN) Found 1 MBR signatures
>>>>>
>>>>> (XEN) Found 1 EDD information structures
>>>>>
>>>>> (XEN) Xen-e820 RAM map:
>>>>>
>>>>> (XEN) 0000000000000000 - 000000000009ec00 (usable)
>>>>>
>>>>> (XEN) 00000000000f0000 - 0000000000100000 (reserved)
>>>>>
>>>>> (XEN) 0000000000100000 - 00000000cfdff800
>> (usable)
>>>>>
>>>>> (XEN) 00000000cfdff800 - 00000000cfe53c00 (ACPI NVS)
>>>>>
>>>>> (XEN) 00000000cfe53c00 - 00000000cfe55c00 (ACPI data)
>>>>>
>>>>> (XEN) 00000000cfe55c00 - 00000000d0000000 (reserved)
>>>>>
>>>>> (XEN) 00000000e0000000 - 00000000f0000000 (reserved)
>>>>>
>>>>> (XEN) 00000000fec00000 - 00000000fed00400 (reserved)
>>>>>
>>>>> (XEN) 00000000fed20000 - 00000000feda0000 (reserved)
>>>>>
>>>>> (XEN) 00000000fee00000 - 00000000fef00000 (reserved)
>>>>>
>>>>> (XEN) 00000000ffb00000 - 0000000100000000 (reserved)
>>>>>
>>>>> (XEN) 0000000100000000 - 0000000128000000 (usable)
>>>>>
>>>>> (XEN) System RAM: 3965MB (4060788kB)
>>>>>
>>>>> (XEN) ACPI: RSDP 000FEC00, 0024 (r2 DELL )
>>>>>
>>>>> (XEN)
>> ACPI: XSDT 000FC5B3, 008C (r1 DELL B9K 15 ASL
>>>>> 61)
>>>>>
>>>>> (XEN) ACPI: FACP 000FC6E3, 00F4 (r3 DELL B9K 15 ASL
>>>>> 61)
>>>>>
>>>>> (XEN) ACPI: DSDT FFF76B39, 4596 (r1 DELL dt_ex 1000 INTL
>>>>> 20050624)
>>>>>
>>>>> (XEN) ACPI: FACS CFDFF800, 0040
>>>>>
>>>>> (XEN) ACPI: SSDT FFF7B1EE, 00AA (r1 DELL st_ex 1000 INTL
>>>>> 20050624)
>>>>>
>>>>> (XEN) ACPI: APIC 000FC7D7, 0092 (r1 DELL B9K 15 ASL
>>>>> 61)
>>>>>
>>>>> (XEN) ACPI: BOOT 000FC869, 0028 (r1 DELL B9K 15 ASL
>>>>> 61)
>>>>>
>>>>> (XEN) ACPI: ASF! 000FC891, 0096 (r32 DELL B9K 15 ASL
>>>>> 61)
>>>>>
>>>>> (XEN) ACPI: MCFG 000FC927, 003E (r1 DELL B9K 15
>> ASL
>>>>> 61)
>>>>>
>>>>> (XEN) ACPI: HPET 000FC965, 0038 (r1 DELL B9K 15 ASL
>>>>> 61)
>>>>>
>>>>> (XEN) ACPI: TCPA 000FCBC1, 0032 (r1 DELL B9K 15 ASL
>>>>> 61)
>>>>>
>>>>> (XEN) ACPI: DMAR 000FCBF3, 00D0 (r1 DELL B9K 15 ASL
>>>>> 61)
>>>>>
>>>>> (XEN) ACPI: SLIC 000FC99D, 0176 (r1 DELL B9K 15 ASL
>>>>> 61)
>>>>>
>>>>> (XEN) ACPI: SSDT CFDFF840, 01F9 (r1 DpgPmm Cpu0Ist 11 INTL
>>>>> 20050624)
>>>>>
>>>>> (XEN) ACPI: SSDT CFDFFC49, 01F9 (r1 DpgPmm Cpu1Ist 11 INTL
>>>>> 20050624)
>>>>>
>>>>> (XEN) ACPI: SSDT CFE00052, 0140 (r1 DpgPmm CpuPm 10 INTL
>>>>> 20050624)
>>>>>
>>>>> (XEN) Xen heap: 14MB (14632kB)
>>>>>
>>>>>
>> (XEN) Domain heap initialised
>>>>>
>>>>> (XEN) Processor #0 6:15 APIC version 20
>>>>>
>>>>> (XEN) Processor #1 6:15 APIC version 20
>>>>>
>>>>> (XEN) IOAPIC[0]: apic_id 8, version 32, address 0xfec00000, GSI
>> 0-23
>>>>>
>>>>> (XEN) Enabling APIC mode: Flat. Using 1 I/O APICs
>>>>>
>>>>> (XEN) Using scheduler: SMP Credit Scheduler (credit)
>>>>>
>>>>> (XEN) Detected 2394.042 MHz processor.
>>>>>
>>>>> (XEN) HVM: VMX enabled
>>>>>
>>>>> (XEN) CPU0: Intel(R) Core(TM)2 CPU 6600 @ 2.40GHz
>> stepping
>>> 06
>>>>>
>>>>> (XEN) Booting processor 1/1 eip 8c000
>>>>>
>>>>> (XEN) CPU1: Intel(R) Core(TM)2 CPU 6600 @ 2.40GHz
>> stepping
>>> 06
>>>>>
>>>>> (XEN) Total of 2 processors
>> activated.
>>>>>
>>>>> (XEN) ENABLING IO-APIC IRQs
>>>>>
>>>>> (XEN) -> Using new ACK method
>>>>>
>>>>> (XEN) checking TSC synchronization across 2 CPUs: passed.
>>>>>
>>>>> (XEN) Platform timer is 14.318MHz HPET
>>>>>
>>>>> (XEN) Brought up 2 CPUs
>>>>>
>>>>> (XEN) I/O virtualisation disabled
>>>>>
>>>>> (XEN) *** LOADING DOMAIN 0 ***
>>>>>
>>>>> (XEN) Xen kernel: 64-bit, lsb, compat32
>>>>>
>>>>> (XEN) Dom0 kernel: 64-bit, PAE, lsb, paddr 0x200000 ->
>> 0x777e68
>>>>>
>>>>> (XEN) PHYSICAL MEMORY ARRANGEMENT:
>>>>>
>>>>> (XEN) Dom0 alloc.: 0000000123000000->0000000124000000
>> (958126
>>> pages
>>>>> to be allocated)
>>>>>
>>>>> (XEN) VIRTUAL MEMORY
>> ARRANGEMENT:
>>>>>
>>>>> (XEN) Loaded kernel: ffffffff80200000->ffffffff80777e68
>>>>>
>>>>> (XEN) Init. ramdisk: ffffffff80778000->ffffffff80778000
>>>>>
>>>>> (XEN) Phys-Mach map: ffffffff80778000->ffffffff80ecf570
>>>>>
>>>>> (XEN) Start info: ffffffff80ed0000->ffffffff80ed04a4
>>>>>
>>>>> (XEN) Page tables: ffffffff80ed1000->ffffffff80edc000
>>>>>
>>>>> (XEN) Boot stack: ffffffff80edc000->ffffffff80edd000
>>>>>
>>>>> (XEN) TOTAL: ffffffff80000000->ffffffff81000000
>>>>>
>>>>> (XEN) ENTRY ADDRESS: ffffffff8064f200
>>>>>
>>>>> (XEN) Dom0 has maximum 2 VCPUs
>>>>>
>>>>> (XEN) Scrubbing Free RAM: .done.
>>>>>
>>>>> (XEN) Xen trace buffers: disabled
>>>>>
>>>>> (XEN) Std.
>> Loglevel: Errors and warnings
>>>>>
>>>>> (XEN) Guest Loglevel: Nothing (Rate-limited: Errors and warnings)
>>>>>
>>>>> (XEN) Xen is relinquishing VGA console.
>>>>>
>>>>> (XEN) *** Serial input -> DOM0 (type 'CTRL-a' three
>> times
>>> to switch
>>>>> input to Xen)
>>>>>
>>>>> (XEN) Freed 108kB init memory.
>>>>>
>>>>> mapping kernel into physical memory
>>>>>
>>>>> Xen: setup ISA identity maps
>>>>>
>>>>> about to get started...
>>>>>
>>>>> PAT disabled on Xen
>>>>>
>>>>> Linux version 2.6.28-rc6-tip (root@optiplex755) (gcc version 4.1.2
>>>>> (Gentoo 4.1.2 p1.0.2)) #2 SMP Wed Dec 3 15:24:08 GMT 2008
>>>>>
>>>>> Command line: root=/dev/sda2 console=hvc0 earlyprintk=xen
>>>>>
>>>>> KERNEL supported
>> cpus:
>>>>>
>>>>> Intel GenuineIntel
>>>>>
>>>>> AMD AuthenticAMD
>>>>>
>>>>> Centaur CentaurHauls
>>>>>
>>>>> BIOS-provided physical RAM map:
>>>>>
>>>>> Xen: 0000000000000000 - 00000000000a0000 (usable)
>>>>>
>>>>> Xen: 00000000000a0000 - 0000000000100000 (reserved)
>>>>>
>>>>> Xen: 0000000000100000 - 0000000000778000 (usable)
>>>>>
>>>>> Xen: 0000000000778000 - 0000000000ed1000 (reserved)
>>>>>
>>>>> Xen: 0000000000ed1000 - 00000000eaeae000 (usable)
>>>>>
>>>>> console [xenboot0] enabled
>>>>>
>>>>> DMI 2.5 present.
>>>>>
>>>>> last_pfn = 0xeaeae max_arch_pfn = 0x3ffffffff
>>>>>
>>>>> init_memory_mapping: 0000000000000000-00000000eaeae000
>>>>>
>>>>> last_map_addr:
>> eaeae000 end: eaeae000
>>>>>
>>>>> ACPI: RSDP 000FEC00, 0024 (r2 DELL )
>>>>>
>>>>> ACPI: XSDT 000FC5B3, 008C (r1 DELL B9K 15 ASL
>> 61)
>>>>>
>>>>> ACPI: FACP 000FC6E3, 00F4 (r3 DELL B9K 15 ASL
>> 61)
>>>>>
>>>>> ACPI: DSDT FFF76B39, 4596 (r1 DELL dt_ex 1000 INTL
>> 20050624)
>>>>>
>>>>> ACPI: FACS CFDFF800, 0040
>>>>>
>>>>> ACPI: SSDT FFF7B1EE, 00AA (r1 DELL st_ex 1000 INTL
>> 20050624)
>>>>>
>>>>> ACPI: APIC 000FC7D7, 0092 (r1 DELL B9K 15 ASL
>> 61)
>>>>>
>>>>> ACPI: BOOT 000FC869, 0028 (r1 DELL B9K 15 ASL
>> 61)
>>>>>
>>>>> ACPI: ASF! 000FC891, 0096 (r32 DELL B9K 15 ASL
>> 61)
>>>>>
>>>>> ACPI: MCFG 000FC927, 003E (r1 DELL B9K
>> 15 ASL
>> 61)
>>>>>
>>>>> ACPI: HPET 000FC965, 0038 (r1 DELL B9K 15 ASL
>> 61)
>>>>>
>>>>> ACPI: TCPA 000FCBC1, 0032 (r1 DELL B9K 15 ASL
>> 61)
>>>>>
>>>>> ACPI: DMAR 000FCBF3, 00D0 (r1 DELL B9K 15 ASL
>> 61)
>>>>>
>>>>> ACPI: SLIC 000FC99D, 0176 (r1 DELL B9K 15 ASL
>> 61)
>>>>>
>>>>> ACPI: SSDT CFDFF840, 01F9 (r1 DpgPmm Cpu0Ist 11 INTL
>> 20050624)
>>>>>
>>>>> ACPI: SSDT CFDFFC49, 01F9 (r1 DpgPmm Cpu1Ist 11 INTL
>> 20050624)
>>>>>
>>>>> ACPI: SSDT CFE00052, 0140 (r1 DpgPmm CpuPm 10 INTL
>> 20050624)
>>>>>
>>>>> ACPI: DMI detected: Dell OptiPlex 755
>>>>>
>>>>> (5 early reservations) ==> bootmem [0000000000 - 00eaeae000]
>>>>>
>>>>> #0
>> [0000000000 - 0000001000] BIOS data page ==> [0000000000
>> -
>>>>> 0000001000]
>>>>>
>>>>> #1 [0000006000 - 0000008000] TRAMPOLINE ==> [0000006000
>> -
>>>>> 0000008000]
>>>>>
>>>>> #2 [0000ed1000 - 0000edc000] XEN PAGETABLES ==> [0000ed1000
>> -
>>>>> 0000edc000]
>>>>>
>>>>> #3 [0000200000 - 0000777e68] TEXT DATA BSS ==> [0000200000
>> -
>>>>> 0000777e68]
>>>>>
>>>>> #4 [0000edc000 - 000162b000] PGTABLE ==> [0000edc000
>> -
>>>>> 000162b000]
>>>>>
>>>>> found SMP MP-table at [ffff8800000fe710] 000fe710
>>>>>
>>>>> Zone PFN ranges:
>>>>>
>>>>> DMA 0x00000000 -> 0x00001000
>>>>>
>>>>> DMA32 0x00001000 -> 0x00100000
>>>>>
>>>>> Normal 0x00100000 ->
>> 0x00100000
>>>>>
>>>>> Movable zone start PFN for each node
>>>>>
>>>>> early_node_map[3] active PFN ranges
>>>>>
>>>>> 0: 0x00000000 -> 0x000000a0
>>>>>
>>>>> 0: 0x00000100 -> 0x00000778
>>>>>
>>>>> 0: 0x00000ed1 -> 0x000eaeae
>>>>>
>>>>> ACPI: PM-Timer IO Port: 0x808
>>>>>
>>>>> ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
>>>>>
>>>>> ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled)
>>>>>
>>>>> ACPI: LAPIC (acpi_id[0x03] lapic_id[0x05] disabled)
>>>>>
>>>>> ACPI: LAPIC (acpi_id[0x04] lapic_id[0x07] disabled)
>>>>>
>>>>> ACPI: LAPIC (acpi_id[0x05] lapic_id[0x00] disabled)
>>>>>
>>>>> ACPI: LAPIC (acpi_id[0x06] lapic_id[0x01] disabled)
>>>>>
>>>>> ACPI: LAPIC
>> (acpi_id[0x07] lapic_id[0x02] disabled)
>>>>>
>>>>> ACPI: LAPIC (acpi_id[0x08] lapic_id[0x03] disabled)
>>>>>
>>>>> ACPI: LAPIC_NMI (acpi_id[0xff] high level lint[0x1])
>>>>>
>>>>> ACPI: IOAPIC (id[0x08] address[0xfec00000] gsi_base[0])
>>>>>
>>>>> IOAPIC[0]: apic_id 8, version 0, address 0xfec00000, GSI 0-23
>>>>>
>>>>> ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
>>>>>
>>>>> ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
>>>>>
>>>>> ACPI: HPET id: 0x8086a301 base: 0xfed00000
>>>>>
>>>>> Using ACPI (MADT) for SMP configuration information
>>>>>
>>>>> SMP: Allowing 2 CPUs, 0 hotplug CPUs
>>>>>
>>>>> (XEN) ioapic_guest_write: apic=0, pin=2, old_irq=0, new_irq=-1
>>>>>
>>>>> (XEN) ioapic_guest_write:
>> old_entry=000009f0, new_entry=00010900
>>>>>
>>>>> (XEN) ioapic_guest_write: Attempt to remove IO-APIC pin of in-use
>> IRQ!
>>>>>
>>>>> (XEN) ioapic_guest_write: apic=0, pin=4, old_irq=4, new_irq=-1
>>>>>
>>>>> (XEN) ioapic_guest_write: old_entry=000009f1, new_entry=00010900
>>>>>
>>>>> (XEN) ioapic_guest_write: Attempt to remove IO-APIC pin of in-use
>> IRQ!
>>>>>
>>>>> Allocating PCI resources starting at ec000000 (gap:
>> eaeae000:15152000)
>>>>>
>>>>> PERCPU: Allocating 57344 bytes of per cpu data
>>>>>
>>>>> Built 1 zonelists in Zone order, mobility grouping on. Total
>> pages:
>>>>> 945674
>>>>>
>>>>> Kernel command line: root=/dev/sda2 console=hvc0 earlyprintk=xen
>>>>>
>>>>> Initializing CPU#0
>>>>>
>>>>> xen: allocated irq 9 for acpi
>> 9
>>>>>
>>>>> PID hash table entries: 4096 (order: 12, 32768 bytes)
>>>>>
>>>>> Detected 2394.042 MHz processor.
>>>>>
>>>>> Console: colour dummy device 80x25
>>>>>
>>>>> console handover: boot [xenboot0] -> real [hvc0]
>>>>>
>>>>> Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes)
>>>>>
>>>>> Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes)
>>>>>
>>>>> Checking aperture...
>>>>>
>>>>> No AGP bridge found
>>>>>
>>>>> PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
>>>>>
>>>>> Placing software IO TLB between 0x51ca000 - 0x91ca000
>>>>>
>>>>> Memory: 3701108k/3848888k available (2519k kernel code, 7908k
>> absent,
>>>>> 139388k reserved, 1546k data, 420k
>> init)
>>>>>
>>>>> installing Xen timer for CPU 0
>>>>>
>>>>> Calibrating delay loop (skipped), value calculated using timer
>>>>> frequency.. 4788.08 BogoMIPS (lpj=9576168)
>>>>>
>>>>> Mount-cache hash table entries: 256
>>>>>
>>>>> CPU: L1 I cache: 32K, L1 D cache: 32K
>>>>>
>>>>> CPU: L2 cache: 4096K
>>>>>
>>>>> CPU: Physical Processor ID: 0
>>>>>
>>>>> CPU: Processor Core ID: 0
>>>>>
>>>>> SMP alternatives: switching to UP code
>>>>>
>>>>> ACPI: Core revision 20080926
>>>>>
>>>>> cpu 0 spinlock event irq 17
>>>>>
>>>>> installing Xen timer for CPU 1
>>>>>
>>>>> cpu 1 spinlock event irq 23
>>>>>
>>>>> SMP alternatives: switching to SMP code
>>>>>
>>>>> Initializing
>> CPU#1
>>>>>
>>>>> CPU: L1 I cache: 32K, L1 D cache: 32K
>>>>>
>>>>> CPU: L2 cache: 4096K
>>>>>
>>>>> CPU: Physical Processor ID: 0
>>>>>
>>>>> CPU: Processor Core ID: 0
>>>>>
>>>>> Brought up 2 CPUs
>>>>>
>>>>> net_namespace: 552 bytes
>>>>>
>>>>> Booting paravirtualized kernel on Xen
>>>>>
>>>>> Xen version: 3.3.0 (preserve-AD) (dom0)
>>>>>
>>>>> Grant table initialized
>>>>>
>>>>> NET: Registered protocol family 16
>>>>>
>>>>> xenbus_probe_init ok
>>>>>
>>>>> ACPI FADT declares the system doesn't support PCIe ASPM, so
>>> disable it
>>>>>
>>>>> ACPI: bus type pci registered
>>>>>
>>>>> PCI: Using configuration type 1 for base access
>>>>>
>>>>> ACPI:
>> Interpreter enabled
>>>>>
>>>>> ACPI: (supports S0 S5)
>>>>>
>>>>> ACPI: Using IOAPIC for interrupt routing
>>>>>
>>>>> ACPI: ACPI Dock Station Driver: 1 docks/bays found
>>>>>
>>>>> ACPI: PCI Root Bridge [PCI0] (0000:00)
>>>>>
>>>>> pci 0000:00:01.0: PME# supported from D0 D3hot D3cold
>>>>>
>>>>> pci 0000:00:01.0: PME# disabled
>>>>>
>>>>> pci 0000:00:03.0: PME# supported from D0 D3hot D3cold
>>>>>
>>>>> pci 0000:00:03.0: PME# disabled
>>>>>
>>>>> pci 0000:00:19.0: PME# supported from D0 D3hot D3cold
>>>>>
>>>>> pci 0000:00:19.0: PME# disabled
>>>>>
>>>>> pci 0000:00:1a.7: PME# supported from D0 D3hot D3cold
>>>>>
>>>>> pci 0000:00:1a.7: PME# disabled
>>>>>
>>>>> pci 0000:00:1b.0: PME# supported
>> from D0 D3hot D3cold
>>>>>
>>>>> pci 0000:00:1b.0: PME# disabled
>>>>>
>>>>> pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
>>>>>
>>>>> pci 0000:00:1c.0: PME# disabled
>>>>>
>>>>> pci 0000:00:1d.7: PME# supported from D0 D3hot D3cold
>>>>>
>>>>> pci 0000:00:1d.7: PME# disabled
>>>>>
>>>>> pci 0000:00:1f.0: quirk: region 0800-087f claimed by ICH6
>>> ACPI/GPIO/TCO
>>>>>
>>>>> pci 0000:00:1f.0: quirk: region 0880-08bf claimed by ICH6 GPIO
>>>>>
>>>>> pci 0000:00:1f.2: PME# supported from D3hot
>>>>>
>>>>> pci 0000:00:1f.2: PME# disabled
>>>>>
>>>>> pci 0000:00:1e.0: transparent bridge
>>>>>
>>>>> ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 9 10 *11 12 15)
>>>>>
>>>>> ACPI: PCI Interrupt Link [LNKB] (IRQs
>> 3 4 *5 6 7 9 10 11 12 15)
>>>>>
>>>>> ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 7 *9 10 11 12 15)
>>>>>
>>>>> ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 9 *10 11 12 15)
>>>>>
>>>>> ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 9 10 11 12 15) *0,
>>>>> disabled.
>>>>>
>>>>> ACPI: PCI Interrupt Link [LNKF] (IRQs *3 4 5 6 7 9 10 11 12 15)
>>>>>
>>>>> ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 *5 6 7 9 10 11 12 15)
>>>>>
>>>>> ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 7 9 *10 11 12 15)
>>>>>
>>>>> ACPI Warning (tbutils-0217): Incorrect checksum in table [TCPA] -
>> 00,
>>>>> should be 87 [20080926]
>>>>>
>>>>> xen_balloon: Initialising balloon driver.
>>>>>
>>>>> SCSI subsystem initialized
>>>>>
>>>>> PCI: Using ACPI for IRQ
>> routing
>>>>>
>>>>> pci 0000:00:01.0: BAR 9: can't allocate resource
>>>>>
>>>>> pci 0000:01:00.0: BAR 0: can't allocate resource
>>>>>
>>>>> Xen: Initializing Xen DMA ops
>>>>>
>>>>> Xen: Enabling DMA fallback to swiotlb
>>>>>
>>>>> PCI-GART: No AMD GART found.
>>>>>
>>>>> pnp: PnP ACPI init
>>>>>
>>>>> ACPI: bus type pnp registered
>>>>>
>>>>> pnp 00:01: io resource (0x800-0x85f) overlaps 0000:00:1f.0 BAR 7
>>>>> (0x800-0x87f), disabling
>>>>>
>>>>> pnp 00:01: io resource (0x860-0x8ff) overlaps 0000:00:1f.0 BAR 7
>>>>> (0x800-0x87f), disabling
>>>>>
>>>>> system 00:01: ioport range 0xc00-0xc7f has been reserved
>>>>>
>>>>> xen_set_ioapic_routing: irq 13 gsi 13 vector 120 ioapic 0 pin 13
>>>>> triggering 1
>> polarity 0
>>>>>
>>>>> xen_set_ioapic_routing: irq 8 gsi 8 vector 80 ioapic 0 pin 8
>>>>> triggering 1 polarity 0
>>>>>
>>>>> xen_set_ioapic_routing: irq 7 gsi 7 vector 72 ioapic 0 pin 7
>>>>> triggering 1 polarity 0
>>>>>
>>>>> xen_set_ioapic_routing: irq 4 gsi 4 vector 241 ioapic 0 pin 4
>>>>> triggering 1 polarity 0
>>>>>
>>>>> (XEN) ioapic_guest_write: apic=0, pin=4, old_irq=4, new_irq=4
>>>>>
>>>>> (XEN) ioapic_guest_write: old_entry=000009f1, new_entry=000189f1
>>>>>
>>>>> (XEN) ioapic_guest_write: Attempt to modify IO-APIC pin for in-use
>>> IRQ!
>>>>>
>>>>> pnp: PnP ACPI: found 9 devices
>>>>>
>>>>> ACPI: ACPI bus type pnp unregistered
>>>>>
>>>>> pci 0000:00:01.0: PCI bridge, secondary bus 0000:01
>>>>>
>>>>> pci
>> 0000:00:01.0: IO window: 0xd000-0xdfff
>>>>>
>>>>> pci 0000:00:01.0: MEM window: 0xfe900000-0xfeafffff
>>>>>
>>>>> pci 0000:00:01.0: PREFETCH window:
>> 0x00000100000000-0x0000010fffffff
>>>>>
>>>>> pci 0000:00:1c.0: PCI bridge, secondary bus 0000:02
>>>>>
>>>>> pci 0000:00:1c.0: IO window: disabled
>>>>>
>>>>> pci 0000:00:1c.0: MEM window: 0xfe800000-0xfe8fffff
>>>>>
>>>>> pci 0000:00:1c.0: PREFETCH window: disabled
>>>>>
>>>>> pci 0000:00:1e.0: PCI bridge, secondary bus 0000:03
>>>>>
>>>>> pci 0000:00:1e.0: IO window: disabled
>>>>>
>>>>> pci 0000:00:1e.0: MEM window: disabled
>>>>>
>>>>> pci 0000:00:1e.0: PREFETCH window: disabled
>>>>>
>>>>> xen_set_ioapic_routing: irq 29 gsi 16 vector 152 ioapic 0 pin
>> 16
>>>>> triggering 0 polarity 1
>>>>>
>>>>> pci 0000:00:01.0: PCI INT A -> GSI 16 (level, low) -> IRQ 29
>>>>>
>>>>> xen: PCI device 0000:00:01.0 pin 1 -> irq 29
>>>>>
>>>>> xen_allocate_pirq: returning irq 29 for gsi 16
>>>>>
>>>>> xen_set_ioapic_routing: irq 29 gsi 16 vector 152 ioapic 0 pin 16
>>>>> triggering 0 polarity 1
>>>>>
>>>>> pci 0000:00:1c.0: PCI INT A -> GSI 16 (level, low) -> IRQ 29
>>>>>
>>>>> xen: PCI device 0000:00:1c.0 pin 1 -> irq 29
>>>>>
>>>>> bus: 00 index 0 io port: [0x00-0xffff]
>>>>>
>>>>> bus: 00 index 1 mmio: [0x000000-0xffffffffffffffff]
>>>>>
>>>>> bus: 01 index 0 io port: [0xd000-0xdfff]
>>>>>
>>>>> bus: 01 index 1 mmio: [0xfe900000-0xfeafffff]
>>>>>
>>>>> bus: 01
>> index 2 mmio: [0x100000000-0x10fffffff]
>>>>>
>>>>> bus: 01 index 3 mmio: [0x0-0x0]
>>>>>
>>>>> bus: 02 index 0 mmio: [0x0-0x0]
>>>>>
>>>>> bus: 02 index 1 mmio: [0xfe800000-0xfe8fffff]
>>>>>
>>>>> bus: 02 index 2 mmio: [0x0-0x0]
>>>>>
>>>>> bus: 02 index 3 mmio: [0x0-0x0]
>>>>>
>>>>> bus: 03 index 0 mmio: [0x0-0x0]
>>>>>
>>>>> bus: 03 index 1 mmio: [0x0-0x0]
>>>>>
>>>>> bus: 03 index 2 mmio: [0x0-0x0]
>>>>>
>>>>> bus: 03 index 3 io port: [0x00-0xffff]
>>>>>
>>>>> bus: 03 index 4 mmio: [0x000000-0xffffffffffffffff]
>>>>>
>>>>> NET: Registered protocol family 2
>>>>>
>>>>> IP route cache hash table entries: 131072 (order: 8, 1048576
>> bytes)
>>>>>
>>>>> TCP established hash table entries: 262144
>> (order: 10, 4194304
>> bytes)
>>>>>
>>>>> TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
>>>>>
>>>>> TCP: Hash tables configured (established 262144 bind 65536)
>>>>>
>>>>> TCP reno registered
>>>>>
>>>>> NET: Registered protocol family 1
>>>>>
>>>>> Simple Boot Flag at 0x7a set to 0x1
>>>>>
>>>>> Installing knfsd (copyright (C) 1996 okir@monad.swb.de).
>>>>>
>>>>> msgmni has been set to 7517
>>>>>
>>>>> io scheduler noop registered
>>>>>
>>>>> io scheduler cfq registered (default)
>>>>>
>>>>> pcieport-driver 0000:00:01.0: found MSI capability
>>>>>
>>>>> pcieport-driver 0000:00:1c.0: found MSI capability
>>>>>
>>>>> input: Power Button (FF) as /class/input/input0
>>>>>
>>>>> ACPI:
>> Power Button (FF) [PWRF]
>>>>>
>>>>> input: Power Button (CM) as /class/input/input1
>>>>>
>>>>> ACPI: Power Button (CM) [VBTN]
>>>>>
>>>>> xenbus_probe_backend_init bus registered ok
>>>>>
>>>>> xenbus_probe_frontend_init bus registered ok
>>>>>
>>>>> Event-channel device installed.
>>>>>
>>>>> ***blkif_init
>>>>>
>>>>> Real Time Clock Driver v1.12ac
>>>>>
>>>>> Linux agpgart interface v0.103
>>>>>
>>>>> floppy0: Unable to grab IRQ6 for the floppy driver
>>>>>
>>>>> brd: module loaded
>>>>>
>>>>> loop: module loaded
>>>>>
>>>>> tun: Universal TUN/TAP device driver, 1.6
>>>>>
>>>>> tun: (C) 1999-2004 Max Krasnyansky <maxk@qualcomm.com>
>>>>>
>>>>> console [netcon0]
>> enabled
>>>>>
>>>>> netconsole: network logging started
>>>>>
>>>>> Driver 'sd' needs updating - please use bus_type methods
>>>>>
>>>>> Driver 'sr' needs updating - please use bus_type methods
>>>>>
>>>>> xen_set_ioapic_routing: irq 31 gsi 18 vector 160 ioapic 0 pin 18
>>>>> triggering 0 polarity 1
>>>>>
>>>>> ahci 0000:00:1f.2: PCI INT C -> GSI 18 (level, low) -> IRQ
>> 31
>>>>>
>>>>> xen: PCI device 0000:00:1f.2 pin 3 -> irq 31
>>>>>
>>>>> ahci 0000:00:1f.2: AHCI 0001.0200 32 slots 6 ports 3 Gbps 0x27
>> impl
>>> SATA
>>>>> mode
>>>>>
>>>>> ahci 0000:00:1f.2: flags: 64bit ncq sntf pm led clo pmp pio slum
>> part
>>> ems
>>>>>
>>>>> (XEN) unexpected IRQ trap at vector 59
>>>>>
>>>>> (XEN) unexpected IRQ trap at vector
>> 59
>>>>>
>>>>> scsi0 : ahci
>>>>>
>>>>> scsi1 : ahci
>>>>>
>>>>> scsi2 : ahci
>>>>>
>>>>> scsi3 : ahci
>>>>>
>>>>> scsi4 : ahci
>>>>>
>>>>> scsi5 : ahci
>>>>>
>>>>> ata1: SATA max UDMA/133 abar m2048@0xff970000 port 0xff970100 irq
>> 1277
>>>>>
>>>>> ata2: SATA max UDMA/133 abar m2048@0xff970000 port 0xff970180 irq
>> 1277
>>>>>
>>>>> ata3: SATA max UDMA/133 abar m2048@0xff970000 port 0xff970200 irq
>> 1277
>>>>>
>>>>> ata4: DUMMY
>>>>>
>>>>> ata5: DUMMY
>>>>>
>>>>> ata6: SATA max UDMA/133 abar m2048@0xff970000 port 0xff970380 irq
>> 1277
>>>>>
>>>>> (XEN) unexpected IRQ trap at vector 59
>>>>>
>>>>> ata1: SATA link up 1.5 Gbps (SStatus 113 SControl
>> 300)
>>>>>
>>>>> (XEN) unexpected IRQ trap at vector 59
>>>>>
>>>>> ata1.00: qc timeout (cmd 0xec)
>>>>>
>>>>> ata1.00: failed to IDENTIFY (I/O error, err_mask=0x4)
>>>>>
>>>>> (XEN) unexpected IRQ trap at vector 59
>>>>>
>>>>> ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
>>>>>
>>>>> (XEN) unexpected IRQ trap at vector 59
>>>>>
>>>>> ata1.00: qc timeout (cmd 0xec)
>>>>>
>>>>> ata1.00: failed to IDENTIFY (I/O error, err_mask=0x4)
>>>>>
>>>>> (XEN) unexpected IRQ trap at vector 59
>>>>>
>>>>> ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
>>>>>
>>>>> (XEN) unexpected IRQ trap at vector 59
>>>>>
>>>>> ata1.00: qc timeout (cmd 0xec)
>>>>>
>>>>> ata1.00: failed to IDENTIFY (I/O error,
>> err_mask=0x4)
>>>>>
>>>>> (XEN) unexpected IRQ trap at vector 59
>>>>>
>>>>> ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
>>>>>
>>>>> ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
>>>>>
>>>>> (XEN) unexpected IRQ trap at vector 59
>>>>>
>>>>> ata2.00: qc timeout (cmd 0xa1)
>>>>>
>>>>> ata2.00: failed to IDENTIFY (I/O error, err_mask=0x4)
>>>>>
>>>>> ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
>>>>>
>>>>> (XEN) unexpected IRQ trap at vector 59
>>>>>
>>>>> ata2.00: qc timeout (cmd 0xa1)
>>>>>
>>>>> ata2.00: failed to IDENTIFY (I/O error, err_mask=0x4)
>>>>>
>>>>> ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
>>>>>
>>>>> (XEN) unexpected IRQ trap at vector
>> 59
>>>>>
>>>>> ata2.00: qc timeout (cmd 0xa1)
>>>>>
>>>>> ata2.00: failed to IDENTIFY (I/O error, err_mask=0x4)
>>>>>
>>>>> ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
>>>>>
>>>>> ata3: SATA link down (SStatus 4 SControl 300)
>>>>>
>>>>> ata6: SATA link down (SStatus 4 SControl 300)
>>>>>
>>>>> PNP: No PS/2 controller found. Probing ports directly.
>>>>>
>>>>> i8042: probe of i8042 failed with error -38
>>>>>
>>>>> mice: PS/2 mouse device common for all mice
>>>>>
>>>>> device-mapper: ioctl: 4.14.0-ioctl (2008-04-23) initialised:
>>>>> dm-devel@redhat.com
>>>>>
>>>>> cpuidle: using governor ladder
>>>>>
>>>>> TCP cubic registered
>>>>>
>>>>> NET: Registered protocol family
>> 17
>>>>>
>>>>> RPC: Registered udp transport module.
>>>>>
>>>>> RPC: Registered tcp transport module.
>>>>>
>>>>> IO APIC resources could be not be allocated.
>>>>>
>>>>> Root-NFS: No NFS server available, giving up.
>>>>>
>>>>> VFS: Unable to mount root fs via NFS, trying floppy.
>>>>>
>>>>> VFS: Insert root floppy and press ENTER
>>>>>
>>>>> Andy
>>>>
>>>> Looks like it is not detecting the drive correctly.
>>>>
>>>> What is your specific controller?
>>>
>>> The system is a Dell Optiplex 755 with Intel onboard sata, I'm having
>>> trouble finding the controller model and lspci only shows that it is
>>> AHCI:
>>> *********************************************************************
>>> When i open the box i can see the spec on South Bridge Chipset
>>> and
>> check with manual. Then enter setup and turn on AHCI, reboot
>>> and load F8 for instance ( or just resque disk with 2.6.21 kernel)
>>> to make sure Linux kernel loads AHCI driver to detect SATA HDD
>>> Kernel 2.6.18 and above does detect AHCI mode on Intel's ICH(7,8,9)R,
>>> but not ICH(6,7,8.9) per Intel Storage Matrix this ones don't support
>>> AHCI.
>>> *********************************************************************
>>>
>>> 00:1f.2 SATA controller: Intel Corporation 6 port SATA AHCI Controller
>> (rev
>>> 02)
>>>
>>> It is my Xen test server and has been running gentoo linux with both
>>> vanilla kernel 2.6.27 (no xen) and 2.6.27+opensuse xen dom0 patches, I
>>> wanted to start my pv_ops dom0 testing with a machine that I know can
>>> run Xen successfully.
>>>
>>> The HD is a Toshiba 2.5" drive as that is all I had to hand when I
>>> installed Gentoo Linux onto this machine,
>> do you think its worth
>>> swapping that for a 3.5"? I've got a raptor lying around
>> somwhere...
>>>
>>> Andy
>>>
>>>
>>>
>>>>
>>>> Cheers,
>>>> Todd
>>>>
>>>> --
>>>> Todd Deshane
>>>> http://todddeshane.net
>>>> http://runningxen.com
>>>>
>>>
>>> _______________________________________________
>>> Xen-devel mailing list
>>> Xen-devel@lists.xensource.com
>>> http://lists.xensource.com/xen-devel
>>>
>>>
>>>
>>>
>>
>> --
>> Sent from my mobile device
>>
>>
>
^ permalink raw reply [flat|nested] 22+ messages in thread
* Re: pv_ops dom0 testing
2008-12-03 19:34 ` Andrew Lyon
2008-12-03 19:39 ` Andrew Lyon
@ 2008-12-03 20:16 ` Jeremy Fitzhardinge
1 sibling, 0 replies; 22+ messages in thread
From: Jeremy Fitzhardinge @ 2008-12-03 20:16 UTC (permalink / raw)
To: Andrew Lyon; +Cc: deshantm, bderzhavets, xen-devel
Andrew Lyon wrote:
> On Wed, Dec 3, 2008 at 6:48 PM, Boris Derzhavets <bderzhavets@yahoo.com> wrote:
>
>> Andy,
>>
>> I am a bit confused , trying to follow up the thread running by Todd and
>> you.
>> Are this messages coming up on your box ?
>>
>> pci 0000:00:1f.0: quirk: region 0800-087f claimed by ICH6 ACPI/GPIO/TCO
>> pci 0000:00:1f.0: quirk: region 0880-08bf claimed by ICH6 GPIO
>>
>
> Yes they are, along with several other messages that look bad:
>
> (XEN) ioapic_guest_write: apic=0, pin=4, old_irq=4, new_irq=4
> (XEN) ioapic_guest_write: old_entry=000009f1, new_entry=000189f1
> (XEN) ioapic_guest_write: Attempt to modify IO-APIC pin for in-use IRQ!
>
That's OK. That's just the kernel trying to steal the serial port irq
from Xen.
> (XEN) unexpected IRQ trap at vector 59
> ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
> (XEN) unexpected IRQ trap at vector 59
> ata1.00: qc timeout (cmd 0xec)
> ata1.00: failed to IDENTIFY (I/O error, err_mask=0x4)
> (XEN) unexpected IRQ trap at vector 59
> ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
> (XEN) unexpected IRQ trap at vector 59
> ata1.00: qc timeout (cmd 0xec)
>
So that's strange. There's been no mention of vector 59 until that
point? I wonder if the IO apic programming is getting mucked up somehow.
J
> Kernel 2.6.27.7 vanilla or patched with opensuse xen dom0 patches
> detects the controller correctly using ahci driver:
>
> optiplex755 ~ # uname -a
> Linux optiplex755 2.6.27-xen-r3 #1 SMP Tue Dec 2 16:05:20 GMT 2008
> x86_64 Intel(R) Core(TM)2 CPU 6600 @ 2.40GHz GenuineIntel GNU/Linux
>
> optiplex755 ~ # lsscsi -H
> [0] ahci
> [1] ahci
> [2] ahci
> [3] ahci
> [4] ahci
> [5] ahci
> [6] usb-storage
>
> optiplex755 ~ # dmesg | grep -E "ahca|scsi|sd|ata"
> Command line: root=/dev/sda2 swiotlb=256 pciback.hide=(03:02.0) console=xvc0
> PERCPU: Allocating 43104 bytes of per cpu data
> Kernel command line: root=/dev/sda2 swiotlb=256 pciback.hide=(03:02.0)
> console=xvc0
> Memory: 3627084k/3847584k available (2956k kernel code, 212136k
> reserved, 1580k data, 264k init)
> libata version 3.00 loaded.
> Installing knfsd (copyright (C) 1996 okir@monad.swb.de).
> Driver 'sd' needs updating - please use bus_type methods
> scsi0 : ahci
> scsi1 : ahci
> scsi2 : ahci
> scsi3 : ahci
> scsi4 : ahci
> scsi5 : ahci
> ata1: SATA max UDMA/133 irq_stat 0x00000040, connection status changed irq 18
> ata2: SATA max UDMA/133 irq_stat 0x00000040, connection status changed irq 18
> ata3: SATA max UDMA/133 abar m2048@0xff970000 port 0xff970200 irq 18
> ata4: DUMMY
> ata5: DUMMY
> ata6: SATA max UDMA/133 abar m2048@0xff970000 port 0xff970380 irq 18
> ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
> ata1.00: ATA-7: TOSHIBA MK6034GSX, AH101A, max UDMA/100
> ata1.00: 117210240 sectors, multi 16: LBA48 NCQ (depth 31/32)
> ata1.00: configured for UDMA/100
> ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
> ata2.00: ATAPI: HL-DT-ST DVD+/-RW GSA-H73N, B103, max UDMA/100
> ata2.00: configured for UDMA/100
> ata3: SATA link down (SStatus 4 SControl 300)
> ata6: SATA link down (SStatus 4 SControl 300)
> scsi 0:0:0:0: Direct-Access ATA TOSHIBA MK6034GS AH10 PQ: 0 ANSI: 5
> sd 0:0:0:0: [sda] 117210240 512-byte hardware sectors (60012 MB)
> sd 0:0:0:0: [sda] Write Protect is off
> sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
> sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't
> support DPO or FUA
> sd 0:0:0:0: [sda] 117210240 512-byte hardware sectors (60012 MB)
> sd 0:0:0:0: [sda] Write Protect is off
> sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
> sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't
> support DPO or FUA
> sda: sda1 sda2 sda3
> sd 0:0:0:0: [sda] Attached SCSI disk
> sd 0:0:0:0: Attached scsi generic sg0 type 0
> scsi 1:0:0:0: CD-ROM HL-DT-ST DVD+-RW GSA-H73N B103 PQ: 0 ANSI: 5
> sr0: scsi3-mmc drive: 48x/48x writer cd/rw xa/form2 cdda tray
> sr 1:0:0:0: Attached scsi CD-ROM sr0
> sr 1:0:0:0: Attached scsi generic sg1 type 5
> scsi6 : SCSI emulation for USB Mass Storage devices
> EXT3-fs: mounted filesystem with ordered data mode.
> scsi 6:0:0:0: Direct-Access TEAC USB HS-CF Card 4.08 PQ: 0 ANSI: 0
> sd 6:0:0:0: [sdb] Attached SCSI removable disk
> sd 6:0:0:0: Attached scsi generic sg2 type 0
>
> Andy
>
>
>> Boris
>>
>> --- On Wed, 12/3/08, Andrew Lyon <andrew.lyon@gmail.com> wrote:
>>
>> From: Andrew Lyon <andrew.lyon@gmail.com>
>> Subject: Re: pv_ops dom0 testing
>> To: bderzhavets@yahoo.com, deshantm@gmail.com, "Jeremy Fitzhardinge"
>> <jeremy@goop.org>, xen-devel@lists.xensource.com
>> Date: Wednesday, December 3, 2008, 1:03 PM
>>
>> Boris,
>>
>> It does support ahci, and it works with other kernels, the problem is
>> that I am testing pvops dom0 kernel and it does not work with that.
>>
>> I included the same drivers I use successfully with other kernels, the
>> problem is with the pvops dom0 kernel.
>>
>> Andy
>>
>> On 03/12/2008, Boris Derzhavets <bderzhavets@yahoo.com> wrote:
>>
>>> --- On Wed, 12/3/08, Andrew Lyon
>>>
>> <andrew.lyon@gmail.com> wrote:
>>
>>> From: Andrew Lyon <andrew.lyon@gmail.com>
>>> Subject: Re: [Xen-devel] pv_ops dom0 testing
>>> To: deshantm@gmail.com
>>> Cc: "Jeremy Fitzhardinge" <jeremy@goop.org>,
>>>
>> xen-devel@lists.xensource.com
>>
>>> Date: Wednesday, December 3, 2008, 12:10 PM
>>>
>>> On Wed, Dec 3, 2008 at 4:43 PM, Todd Deshane <deshantm@gmail.com>
>>>
>> wrote:
>>
>>>>
>>>>> I had the system setup to output to serial and vga console
>>>>> (console=vga,com1) but it seems that the vga console only displays
>>>>>
>> Xen
>>
>>>>> debug messages,
>>>>>
>>>> Here is my grub debug setup for reference
>>>>
>>>> title Xen 3.4-unstable DEBUG/ Ubuntu 8.10, kernel
>>>>
>> 2.6.28-rc6-tip
>>
>>>> root (hd0,0)
>>>> kernel /boot/xen-3.4-unstable.gz loglvl=all guest_loglvl=all
>>>> com1=115200,8n1 console=com1
>>>>
>> mem=3G
>>
>>>> module /boot/vmlinuz-2.6.28-rc6-tip root=/dev/sda1 ro
>>>>
>>> console=hvc0
>>>
>>>> earlyprintk=xen xencons=ttyS0,115200 nousb
>>>> module /boot/initrd.img-2.6.28-rc6-tip
>>>>
>>>>
>>>>
>>>>> I hooked up a null modem cable and I've now captured
>>>>> the full xen and linux dmesg, it appears that the onboard intel
>>>>>
>> ahci
>>
>>>>> sata is not working so the kernel is unable to run init:
>>>>>
>>>>> __ __ _____ _____ ___
>>>>>
>>>>> \ \/ /___ _ __ |___ / |___ / / _ \
>>>>>
>>>>> \ // _ \ '_ \ |_ \ |_ \| | | |
>>>>>
>>>>> / \ __/ | | | ___) | ___) | |_| |
>>>>>
>>>>> /_/\_\___|_| |_| |____(_)____(_)___/
>>>>>
>>>>>
>>>>>
>>>>> (XEN) Xen version 3.3.0 (root@(none)) (gcc version 4.1.2
>>>>>
>> (Gentoo
>> 4.1.2
>>
>>>>> p1.0.2)) Tue Dec 2 15:55:55 GMT 2008
>>>>>
>>>>> (XEN) Latest ChangeSet: unavailable
>>>>>
>>>>> (XEN) Command line: com1=115200,8n1 console=vga,com1
>>>>>
>>>>> (XEN) Video information:
>>>>>
>>>>> (XEN) VGA is text mode 80x25, font 8x16
>>>>>
>>>>> (XEN) VBE/DDC methods: V2; EDID transfer time: 1 seconds
>>>>>
>>>>> (XEN) Disc information:
>>>>>
>>>>> (XEN) Found 1 MBR signatures
>>>>>
>>>>> (XEN) Found 1 EDD information structures
>>>>>
>>>>> (XEN) Xen-e820 RAM map:
>>>>>
>>>>> (XEN) 0000000000000000 - 000000000009ec00 (usable)
>>>>>
>>>>> (XEN) 00000000000f0000 - 0000000000100000 (reserved)
>>>>>
>>>>> (XEN) 0000000000100000 - 00000000cfdff800
>>>>>
>> (usable)
>>
>>>>> (XEN) 00000000cfdff800 - 00000000cfe53c00 (ACPI NVS)
>>>>>
>>>>> (XEN) 00000000cfe53c00 - 00000000cfe55c00 (ACPI data)
>>>>>
>>>>> (XEN) 00000000cfe55c00 - 00000000d0000000 (reserved)
>>>>>
>>>>> (XEN) 00000000e0000000 - 00000000f0000000 (reserved)
>>>>>
>>>>> (XEN) 00000000fec00000 - 00000000fed00400 (reserved)
>>>>>
>>>>> (XEN) 00000000fed20000 - 00000000feda0000 (reserved)
>>>>>
>>>>> (XEN) 00000000fee00000 - 00000000fef00000 (reserved)
>>>>>
>>>>> (XEN) 00000000ffb00000 - 0000000100000000 (reserved)
>>>>>
>>>>> (XEN) 0000000100000000 - 0000000128000000 (usable)
>>>>>
>>>>> (XEN) System RAM: 3965MB (4060788kB)
>>>>>
>>>>> (XEN) ACPI: RSDP 000FEC00, 0024 (r2 DELL )
>>>>>
>>>>> (XEN)
>>>>>
>> ACPI: XSDT 000FC5B3, 008C (r1 DELL B9K 15 ASL
>>
>>>>> 61)
>>>>>
>>>>> (XEN) ACPI: FACP 000FC6E3, 00F4 (r3 DELL B9K 15 ASL
>>>>> 61)
>>>>>
>>>>> (XEN) ACPI: DSDT FFF76B39, 4596 (r1 DELL dt_ex 1000 INTL
>>>>> 20050624)
>>>>>
>>>>> (XEN) ACPI: FACS CFDFF800, 0040
>>>>>
>>>>> (XEN) ACPI: SSDT FFF7B1EE, 00AA (r1 DELL st_ex 1000 INTL
>>>>> 20050624)
>>>>>
>>>>> (XEN) ACPI: APIC 000FC7D7, 0092 (r1 DELL B9K 15 ASL
>>>>> 61)
>>>>>
>>>>> (XEN) ACPI: BOOT 000FC869, 0028 (r1 DELL B9K 15 ASL
>>>>> 61)
>>>>>
>>>>> (XEN) ACPI: ASF! 000FC891, 0096 (r32 DELL B9K 15 ASL
>>>>> 61)
>>>>>
>>>>> (XEN) ACPI: MCFG 000FC927, 003E (r1 DELL B9K 15
>>>>>
>> ASL
>>
>>>>> 61)
>>>>>
>>>>> (XEN) ACPI: HPET 000FC965, 0038 (r1 DELL B9K 15 ASL
>>>>> 61)
>>>>>
>>>>> (XEN) ACPI: TCPA 000FCBC1, 0032 (r1 DELL B9K 15 ASL
>>>>> 61)
>>>>>
>>>>> (XEN) ACPI: DMAR 000FCBF3, 00D0 (r1 DELL B9K 15 ASL
>>>>> 61)
>>>>>
>>>>> (XEN) ACPI: SLIC 000FC99D, 0176 (r1 DELL B9K 15 ASL
>>>>> 61)
>>>>>
>>>>> (XEN) ACPI: SSDT CFDFF840, 01F9 (r1 DpgPmm Cpu0Ist 11 INTL
>>>>> 20050624)
>>>>>
>>>>> (XEN) ACPI: SSDT CFDFFC49, 01F9 (r1 DpgPmm Cpu1Ist 11 INTL
>>>>> 20050624)
>>>>>
>>>>> (XEN) ACPI: SSDT CFE00052, 0140 (r1 DpgPmm CpuPm 10 INTL
>>>>> 20050624)
>>>>>
>>>>> (XEN) Xen heap: 14MB (14632kB)
>>>>>
>>>>>
>>>>>
>> (XEN) Domain heap initialised
>>
>>>>> (XEN) Processor #0 6:15 APIC version 20
>>>>>
>>>>> (XEN) Processor #1 6:15 APIC version 20
>>>>>
>>>>> (XEN) IOAPIC[0]: apic_id 8, version 32, address 0xfec00000, GSI
>>>>>
>> 0-23
>>
>>>>> (XEN) Enabling APIC mode: Flat. Using 1 I/O APICs
>>>>>
>>>>> (XEN) Using scheduler: SMP Credit Scheduler (credit)
>>>>>
>>>>> (XEN) Detected 2394.042 MHz processor.
>>>>>
>>>>> (XEN) HVM: VMX enabled
>>>>>
>>>>> (XEN) CPU0: Intel(R) Core(TM)2 CPU 6600 @ 2.40GHz
>>>>>
>> stepping
>>
>>> 06
>>>
>>>>> (XEN) Booting processor 1/1 eip 8c000
>>>>>
>>>>> (XEN) CPU1: Intel(R) Core(TM)2 CPU 6600 @ 2.40GHz
>>>>>
>> stepping
>>
>>> 06
>>>
>>>>> (XEN) Total of 2 processors
>>>>>
>> activated.
>>
>>>>> (XEN) ENABLING IO-APIC IRQs
>>>>>
>>>>> (XEN) -> Using new ACK method
>>>>>
>>>>> (XEN) checking TSC synchronization across 2 CPUs: passed.
>>>>>
>>>>> (XEN) Platform timer is 14.318MHz HPET
>>>>>
>>>>> (XEN) Brought up 2 CPUs
>>>>>
>>>>> (XEN) I/O virtualisation disabled
>>>>>
>>>>> (XEN) *** LOADING DOMAIN 0 ***
>>>>>
>>>>> (XEN) Xen kernel: 64-bit, lsb, compat32
>>>>>
>>>>> (XEN) Dom0 kernel: 64-bit, PAE, lsb, paddr 0x200000 ->
>>>>>
>> 0x777e68
>>
>>>>> (XEN) PHYSICAL MEMORY ARRANGEMENT:
>>>>>
>>>>> (XEN) Dom0 alloc.: 0000000123000000->0000000124000000
>>>>>
>> (958126
>>
>>> pages
>>>
>>>>> to be allocated)
>>>>>
>>>>> (XEN) VIRTUAL MEMORY
>>>>>
>> ARRANGEMENT:
>>
>>>>> (XEN) Loaded kernel: ffffffff80200000->ffffffff80777e68
>>>>>
>>>>> (XEN) Init. ramdisk: ffffffff80778000->ffffffff80778000
>>>>>
>>>>> (XEN) Phys-Mach map: ffffffff80778000->ffffffff80ecf570
>>>>>
>>>>> (XEN) Start info: ffffffff80ed0000->ffffffff80ed04a4
>>>>>
>>>>> (XEN) Page tables: ffffffff80ed1000->ffffffff80edc000
>>>>>
>>>>> (XEN) Boot stack: ffffffff80edc000->ffffffff80edd000
>>>>>
>>>>> (XEN) TOTAL: ffffffff80000000->ffffffff81000000
>>>>>
>>>>> (XEN) ENTRY ADDRESS: ffffffff8064f200
>>>>>
>>>>> (XEN) Dom0 has maximum 2 VCPUs
>>>>>
>>>>> (XEN) Scrubbing Free RAM: .done.
>>>>>
>>>>> (XEN) Xen trace buffers: disabled
>>>>>
>>>>> (XEN) Std.
>>>>>
>> Loglevel: Errors and warnings
>>
>>>>> (XEN) Guest Loglevel: Nothing (Rate-limited: Errors and warnings)
>>>>>
>>>>> (XEN) Xen is relinquishing VGA console.
>>>>>
>>>>> (XEN) *** Serial input -> DOM0 (type 'CTRL-a' three
>>>>>
>> times
>>
>>> to switch
>>>
>>>>> input to Xen)
>>>>>
>>>>> (XEN) Freed 108kB init memory.
>>>>>
>>>>> mapping kernel into physical memory
>>>>>
>>>>> Xen: setup ISA identity maps
>>>>>
>>>>> about to get started...
>>>>>
>>>>> PAT disabled on Xen
>>>>>
>>>>> Linux version 2.6.28-rc6-tip (root@optiplex755) (gcc version 4.1.2
>>>>> (Gentoo 4.1.2 p1.0.2)) #2 SMP Wed Dec 3 15:24:08 GMT 2008
>>>>>
>>>>> Command line: root=/dev/sda2 console=hvc0 earlyprintk=xen
>>>>>
>>>>> KERNEL supported
>>>>>
>> cpus:
>>
>>>>> Intel GenuineIntel
>>>>>
>>>>> AMD AuthenticAMD
>>>>>
>>>>> Centaur CentaurHauls
>>>>>
>>>>> BIOS-provided physical RAM map:
>>>>>
>>>>> Xen: 0000000000000000 - 00000000000a0000 (usable)
>>>>>
>>>>> Xen: 00000000000a0000 - 0000000000100000 (reserved)
>>>>>
>>>>> Xen: 0000000000100000 - 0000000000778000 (usable)
>>>>>
>>>>> Xen: 0000000000778000 - 0000000000ed1000 (reserved)
>>>>>
>>>>> Xen: 0000000000ed1000 - 00000000eaeae000 (usable)
>>>>>
>>>>> console [xenboot0] enabled
>>>>>
>>>>> DMI 2.5 present.
>>>>>
>>>>> last_pfn = 0xeaeae max_arch_pfn = 0x3ffffffff
>>>>>
>>>>> init_memory_mapping: 0000000000000000-00000000eaeae000
>>>>>
>>>>> last_map_addr:
>>>>>
>> eaeae000 end: eaeae000
>>
>>>>> ACPI: RSDP 000FEC00, 0024 (r2 DELL )
>>>>>
>>>>> ACPI: XSDT 000FC5B3, 008C (r1 DELL B9K 15 ASL
>>>>>
>> 61)
>>
>>>>> ACPI: FACP 000FC6E3, 00F4 (r3 DELL B9K 15 ASL
>>>>>
>> 61)
>>
>>>>> ACPI: DSDT FFF76B39, 4596 (r1 DELL dt_ex 1000 INTL
>>>>>
>> 20050624)
>>
>>>>> ACPI: FACS CFDFF800, 0040
>>>>>
>>>>> ACPI: SSDT FFF7B1EE, 00AA (r1 DELL st_ex 1000 INTL
>>>>>
>> 20050624)
>>
>>>>> ACPI: APIC 000FC7D7, 0092 (r1 DELL B9K 15 ASL
>>>>>
>> 61)
>>
>>>>> ACPI: BOOT 000FC869, 0028 (r1 DELL B9K 15 ASL
>>>>>
>> 61)
>>
>>>>> ACPI: ASF! 000FC891, 0096 (r32 DELL B9K 15 ASL
>>>>>
>> 61)
>>
>>>>> ACPI: MCFG 000FC927, 003E (r1 DELL B9K
>>>>>
>> 15 ASL
>> 61)
>>
>>>>> ACPI: HPET 000FC965, 0038 (r1 DELL B9K 15 ASL
>>>>>
>> 61)
>>
>>>>> ACPI: TCPA 000FCBC1, 0032 (r1 DELL B9K 15 ASL
>>>>>
>> 61)
>>
>>>>> ACPI: DMAR 000FCBF3, 00D0 (r1 DELL B9K 15 ASL
>>>>>
>> 61)
>>
>>>>> ACPI: SLIC 000FC99D, 0176 (r1 DELL B9K 15 ASL
>>>>>
>> 61)
>>
>>>>> ACPI: SSDT CFDFF840, 01F9 (r1 DpgPmm Cpu0Ist 11 INTL
>>>>>
>> 20050624)
>>
>>>>> ACPI: SSDT CFDFFC49, 01F9 (r1 DpgPmm Cpu1Ist 11 INTL
>>>>>
>> 20050624)
>>
>>>>> ACPI: SSDT CFE00052, 0140 (r1 DpgPmm CpuPm 10 INTL
>>>>>
>> 20050624)
>>
>>>>> ACPI: DMI detected: Dell OptiPlex 755
>>>>>
>>>>> (5 early reservations) ==> bootmem [0000000000 - 00eaeae000]
>>>>>
>>>>> #0
>>>>>
>> [0000000000 - 0000001000] BIOS data page ==> [0000000000
>> -
>>
>>>>> 0000001000]
>>>>>
>>>>> #1 [0000006000 - 0000008000] TRAMPOLINE ==> [0000006000
>>>>>
>> -
>>
>>>>> 0000008000]
>>>>>
>>>>> #2 [0000ed1000 - 0000edc000] XEN PAGETABLES ==> [0000ed1000
>>>>>
>> -
>>
>>>>> 0000edc000]
>>>>>
>>>>> #3 [0000200000 - 0000777e68] TEXT DATA BSS ==> [0000200000
>>>>>
>> -
>>
>>>>> 0000777e68]
>>>>>
>>>>> #4 [0000edc000 - 000162b000] PGTABLE ==> [0000edc000
>>>>>
>> -
>>
>>>>> 000162b000]
>>>>>
>>>>> found SMP MP-table at [ffff8800000fe710] 000fe710
>>>>>
>>>>> Zone PFN ranges:
>>>>>
>>>>> DMA 0x00000000 -> 0x00001000
>>>>>
>>>>> DMA32 0x00001000 -> 0x00100000
>>>>>
>>>>> Normal 0x00100000 ->
>>>>>
>> 0x00100000
>>
>>>>> Movable zone start PFN for each node
>>>>>
>>>>> early_node_map[3] active PFN ranges
>>>>>
>>>>> 0: 0x00000000 -> 0x000000a0
>>>>>
>>>>> 0: 0x00000100 -> 0x00000778
>>>>>
>>>>> 0: 0x00000ed1 -> 0x000eaeae
>>>>>
>>>>> ACPI: PM-Timer IO Port: 0x808
>>>>>
>>>>> ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
>>>>>
>>>>> ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled)
>>>>>
>>>>> ACPI: LAPIC (acpi_id[0x03] lapic_id[0x05] disabled)
>>>>>
>>>>> ACPI: LAPIC (acpi_id[0x04] lapic_id[0x07] disabled)
>>>>>
>>>>> ACPI: LAPIC (acpi_id[0x05] lapic_id[0x00] disabled)
>>>>>
>>>>> ACPI: LAPIC (acpi_id[0x06] lapic_id[0x01] disabled)
>>>>>
>>>>> ACPI: LAPIC
>>>>>
>> (acpi_id[0x07] lapic_id[0x02] disabled)
>>
>>>>> ACPI: LAPIC (acpi_id[0x08] lapic_id[0x03] disabled)
>>>>>
>>>>> ACPI: LAPIC_NMI (acpi_id[0xff] high level lint[0x1])
>>>>>
>>>>> ACPI: IOAPIC (id[0x08] address[0xfec00000] gsi_base[0])
>>>>>
>>>>> IOAPIC[0]: apic_id 8, version 0, address 0xfec00000, GSI 0-23
>>>>>
>>>>> ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
>>>>>
>>>>> ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
>>>>>
>>>>> ACPI: HPET id: 0x8086a301 base: 0xfed00000
>>>>>
>>>>> Using ACPI (MADT) for SMP configuration information
>>>>>
>>>>> SMP: Allowing 2 CPUs, 0 hotplug CPUs
>>>>>
>>>>> (XEN) ioapic_guest_write: apic=0, pin=2, old_irq=0, new_irq=-1
>>>>>
>>>>> (XEN) ioapic_guest_write:
>>>>>
>> old_entry=000009f0, new_entry=00010900
>>
>>>>> (XEN) ioapic_guest_write: Attempt to remove IO-APIC pin of in-use
>>>>>
>> IRQ!
>>
>>>>> (XEN) ioapic_guest_write: apic=0, pin=4, old_irq=4, new_irq=-1
>>>>>
>>>>> (XEN) ioapic_guest_write: old_entry=000009f1, new_entry=00010900
>>>>>
>>>>> (XEN) ioapic_guest_write: Attempt to remove IO-APIC pin of in-use
>>>>>
>> IRQ!
>>
>>>>> Allocating PCI resources starting at ec000000 (gap:
>>>>>
>> eaeae000:15152000)
>>
>>>>> PERCPU: Allocating 57344 bytes of per cpu data
>>>>>
>>>>> Built 1 zonelists in Zone order, mobility grouping on. Total
>>>>>
>> pages:
>>
>>>>> 945674
>>>>>
>>>>> Kernel command line: root=/dev/sda2 console=hvc0 earlyprintk=xen
>>>>>
>>>>> Initializing CPU#0
>>>>>
>>>>> xen: allocated irq 9 for acpi
>>>>>
>> 9
>>
>>>>> PID hash table entries: 4096 (order: 12, 32768 bytes)
>>>>>
>>>>> Detected 2394.042 MHz processor.
>>>>>
>>>>> Console: colour dummy device 80x25
>>>>>
>>>>> console handover: boot [xenboot0] -> real [hvc0]
>>>>>
>>>>> Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes)
>>>>>
>>>>> Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes)
>>>>>
>>>>> Checking aperture...
>>>>>
>>>>> No AGP bridge found
>>>>>
>>>>> PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
>>>>>
>>>>> Placing software IO TLB between 0x51ca000 - 0x91ca000
>>>>>
>>>>> Memory: 3701108k/3848888k available (2519k kernel code, 7908k
>>>>>
>> absent,
>>
>>>>> 139388k reserved, 1546k data, 420k
>>>>>
>> init)
>>
>>>>> installing Xen timer for CPU 0
>>>>>
>>>>> Calibrating delay loop (skipped), value calculated using timer
>>>>> frequency.. 4788.08 BogoMIPS (lpj=9576168)
>>>>>
>>>>> Mount-cache hash table entries: 256
>>>>>
>>>>> CPU: L1 I cache: 32K, L1 D cache: 32K
>>>>>
>>>>> CPU: L2 cache: 4096K
>>>>>
>>>>> CPU: Physical Processor ID: 0
>>>>>
>>>>> CPU: Processor Core ID: 0
>>>>>
>>>>> SMP alternatives: switching to UP code
>>>>>
>>>>> ACPI: Core revision 20080926
>>>>>
>>>>> cpu 0 spinlock event irq 17
>>>>>
>>>>> installing Xen timer for CPU 1
>>>>>
>>>>> cpu 1 spinlock event irq 23
>>>>>
>>>>> SMP alternatives: switching to SMP code
>>>>>
>>>>> Initializing
>>>>>
>> CPU#1
>>
>>>>> CPU: L1 I cache: 32K, L1 D cache: 32K
>>>>>
>>>>> CPU: L2 cache: 4096K
>>>>>
>>>>> CPU: Physical Processor ID: 0
>>>>>
>>>>> CPU: Processor Core ID: 0
>>>>>
>>>>> Brought up 2 CPUs
>>>>>
>>>>> net_namespace: 552 bytes
>>>>>
>>>>> Booting paravirtualized kernel on Xen
>>>>>
>>>>> Xen version: 3.3.0 (preserve-AD) (dom0)
>>>>>
>>>>> Grant table initialized
>>>>>
>>>>> NET: Registered protocol family 16
>>>>>
>>>>> xenbus_probe_init ok
>>>>>
>>>>> ACPI FADT declares the system doesn't support PCIe ASPM, so
>>>>>
>>> disable it
>>>
>>>>> ACPI: bus type pci registered
>>>>>
>>>>> PCI: Using configuration type 1 for base access
>>>>>
>>>>> ACPI:
>>>>>
>> Interpreter enabled
>>
>>>>> ACPI: (supports S0 S5)
>>>>>
>>>>> ACPI: Using IOAPIC for interrupt routing
>>>>>
>>>>> ACPI: ACPI Dock Station Driver: 1 docks/bays found
>>>>>
>>>>> ACPI: PCI Root Bridge [PCI0] (0000:00)
>>>>>
>>>>> pci 0000:00:01.0: PME# supported from D0 D3hot D3cold
>>>>>
>>>>> pci 0000:00:01.0: PME# disabled
>>>>>
>>>>> pci 0000:00:03.0: PME# supported from D0 D3hot D3cold
>>>>>
>>>>> pci 0000:00:03.0: PME# disabled
>>>>>
>>>>> pci 0000:00:19.0: PME# supported from D0 D3hot D3cold
>>>>>
>>>>> pci 0000:00:19.0: PME# disabled
>>>>>
>>>>> pci 0000:00:1a.7: PME# supported from D0 D3hot D3cold
>>>>>
>>>>> pci 0000:00:1a.7: PME# disabled
>>>>>
>>>>> pci 0000:00:1b.0: PME# supported
>>>>>
>> from D0 D3hot D3cold
>>
>>>>> pci 0000:00:1b.0: PME# disabled
>>>>>
>>>>> pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
>>>>>
>>>>> pci 0000:00:1c.0: PME# disabled
>>>>>
>>>>> pci 0000:00:1d.7: PME# supported from D0 D3hot D3cold
>>>>>
>>>>> pci 0000:00:1d.7: PME# disabled
>>>>>
>>>>> pci 0000:00:1f.0: quirk: region 0800-087f claimed by ICH6
>>>>>
>>> ACPI/GPIO/TCO
>>>
>>>>> pci 0000:00:1f.0: quirk: region 0880-08bf claimed by ICH6 GPIO
>>>>>
>>>>> pci 0000:00:1f.2: PME# supported from D3hot
>>>>>
>>>>> pci 0000:00:1f.2: PME# disabled
>>>>>
>>>>> pci 0000:00:1e.0: transparent bridge
>>>>>
>>>>> ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 9 10 *11 12 15)
>>>>>
>>>>> ACPI: PCI Interrupt Link [LNKB] (IRQs
>>>>>
>> 3 4 *5 6 7 9 10 11 12 15)
>>
>>>>> ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 7 *9 10 11 12 15)
>>>>>
>>>>> ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 9 *10 11 12 15)
>>>>>
>>>>> ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 9 10 11 12 15) *0,
>>>>> disabled.
>>>>>
>>>>> ACPI: PCI Interrupt Link [LNKF] (IRQs *3 4 5 6 7 9 10 11 12 15)
>>>>>
>>>>> ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 *5 6 7 9 10 11 12 15)
>>>>>
>>>>> ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 7 9 *10 11 12 15)
>>>>>
>>>>> ACPI Warning (tbutils-0217): Incorrect checksum in table [TCPA] -
>>>>>
>> 00,
>>
>>>>> should be 87 [20080926]
>>>>>
>>>>> xen_balloon: Initialising balloon driver.
>>>>>
>>>>> SCSI subsystem initialized
>>>>>
>>>>> PCI: Using ACPI for IRQ
>>>>>
>> routing
>>
>>>>> pci 0000:00:01.0: BAR 9: can't allocate resource
>>>>>
>>>>> pci 0000:01:00.0: BAR 0: can't allocate resource
>>>>>
>>>>> Xen: Initializing Xen DMA ops
>>>>>
>>>>> Xen: Enabling DMA fallback to swiotlb
>>>>>
>>>>> PCI-GART: No AMD GART found.
>>>>>
>>>>> pnp: PnP ACPI init
>>>>>
>>>>> ACPI: bus type pnp registered
>>>>>
>>>>> pnp 00:01: io resource (0x800-0x85f) overlaps 0000:00:1f.0 BAR 7
>>>>> (0x800-0x87f), disabling
>>>>>
>>>>> pnp 00:01: io resource (0x860-0x8ff) overlaps 0000:00:1f.0 BAR 7
>>>>> (0x800-0x87f), disabling
>>>>>
>>>>> system 00:01: ioport range 0xc00-0xc7f has been reserved
>>>>>
>>>>> xen_set_ioapic_routing: irq 13 gsi 13 vector 120 ioapic 0 pin 13
>>>>> triggering 1
>>>>>
>> polarity 0
>>
>>>>> xen_set_ioapic_routing: irq 8 gsi 8 vector 80 ioapic 0 pin 8
>>>>> triggering 1 polarity 0
>>>>>
>>>>> xen_set_ioapic_routing: irq 7 gsi 7 vector 72 ioapic 0 pin 7
>>>>> triggering 1 polarity 0
>>>>>
>>>>> xen_set_ioapic_routing: irq 4 gsi 4 vector 241 ioapic 0 pin 4
>>>>> triggering 1 polarity 0
>>>>>
>>>>> (XEN) ioapic_guest_write: apic=0, pin=4, old_irq=4, new_irq=4
>>>>>
>>>>> (XEN) ioapic_guest_write: old_entry=000009f1, new_entry=000189f1
>>>>>
>>>>> (XEN) ioapic_guest_write: Attempt to modify IO-APIC pin for in-use
>>>>>
>>> IRQ!
>>>
>>>>> pnp: PnP ACPI: found 9 devices
>>>>>
>>>>> ACPI: ACPI bus type pnp unregistered
>>>>>
>>>>> pci 0000:00:01.0: PCI bridge, secondary bus 0000:01
>>>>>
>>>>> pci
>>>>>
>> 0000:00:01.0: IO window: 0xd000-0xdfff
>>
>>>>> pci 0000:00:01.0: MEM window: 0xfe900000-0xfeafffff
>>>>>
>>>>> pci 0000:00:01.0: PREFETCH window:
>>>>>
>> 0x00000100000000-0x0000010fffffff
>>
>>>>> pci 0000:00:1c.0: PCI bridge, secondary bus 0000:02
>>>>>
>>>>> pci 0000:00:1c.0: IO window: disabled
>>>>>
>>>>> pci 0000:00:1c.0: MEM window: 0xfe800000-0xfe8fffff
>>>>>
>>>>> pci 0000:00:1c.0: PREFETCH window: disabled
>>>>>
>>>>> pci 0000:00:1e.0: PCI bridge, secondary bus 0000:03
>>>>>
>>>>> pci 0000:00:1e.0: IO window: disabled
>>>>>
>>>>> pci 0000:00:1e.0: MEM window: disabled
>>>>>
>>>>> pci 0000:00:1e.0: PREFETCH window: disabled
>>>>>
>>>>> xen_set_ioapic_routing: irq 29 gsi 16 vector 152 ioapic 0 pin
>>>>>
>> 16
>>
>>>>> triggering 0 polarity 1
>>>>>
>>>>> pci 0000:00:01.0: PCI INT A -> GSI 16 (level, low) -> IRQ 29
>>>>>
>>>>> xen: PCI device 0000:00:01.0 pin 1 -> irq 29
>>>>>
>>>>> xen_allocate_pirq: returning irq 29 for gsi 16
>>>>>
>>>>> xen_set_ioapic_routing: irq 29 gsi 16 vector 152 ioapic 0 pin 16
>>>>> triggering 0 polarity 1
>>>>>
>>>>> pci 0000:00:1c.0: PCI INT A -> GSI 16 (level, low) -> IRQ 29
>>>>>
>>>>> xen: PCI device 0000:00:1c.0 pin 1 -> irq 29
>>>>>
>>>>> bus: 00 index 0 io port: [0x00-0xffff]
>>>>>
>>>>> bus: 00 index 1 mmio: [0x000000-0xffffffffffffffff]
>>>>>
>>>>> bus: 01 index 0 io port: [0xd000-0xdfff]
>>>>>
>>>>> bus: 01 index 1 mmio: [0xfe900000-0xfeafffff]
>>>>>
>>>>> bus: 01
>>>>>
>> index 2 mmio: [0x100000000-0x10fffffff]
>>
>>>>> bus: 01 index 3 mmio: [0x0-0x0]
>>>>>
>>>>> bus: 02 index 0 mmio: [0x0-0x0]
>>>>>
>>>>> bus: 02 index 1 mmio: [0xfe800000-0xfe8fffff]
>>>>>
>>>>> bus: 02 index 2 mmio: [0x0-0x0]
>>>>>
>>>>> bus: 02 index 3 mmio: [0x0-0x0]
>>>>>
>>>>> bus: 03 index 0 mmio: [0x0-0x0]
>>>>>
>>>>> bus: 03 index 1 mmio: [0x0-0x0]
>>>>>
>>>>> bus: 03 index 2 mmio: [0x0-0x0]
>>>>>
>>>>> bus: 03 index 3 io port: [0x00-0xffff]
>>>>>
>>>>> bus: 03 index 4 mmio: [0x000000-0xffffffffffffffff]
>>>>>
>>>>> NET: Registered protocol family 2
>>>>>
>>>>> IP route cache hash table entries: 131072 (order: 8, 1048576
>>>>>
>> bytes)
>>
>>>>> TCP established hash table entries: 262144
>>>>>
>> (order: 10, 4194304
>> bytes)
>>
>>>>> TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
>>>>>
>>>>> TCP: Hash tables configured (established 262144 bind 65536)
>>>>>
>>>>> TCP reno registered
>>>>>
>>>>> NET: Registered protocol family 1
>>>>>
>>>>> Simple Boot Flag at 0x7a set to 0x1
>>>>>
>>>>> Installing knfsd (copyright (C) 1996 okir@monad.swb.de).
>>>>>
>>>>> msgmni has been set to 7517
>>>>>
>>>>> io scheduler noop registered
>>>>>
>>>>> io scheduler cfq registered (default)
>>>>>
>>>>> pcieport-driver 0000:00:01.0: found MSI capability
>>>>>
>>>>> pcieport-driver 0000:00:1c.0: found MSI capability
>>>>>
>>>>> input: Power Button (FF) as /class/input/input0
>>>>>
>>>>> ACPI:
>>>>>
>> Power Button (FF) [PWRF]
>>
>>>>> input: Power Button (CM) as /class/input/input1
>>>>>
>>>>> ACPI: Power Button (CM) [VBTN]
>>>>>
>>>>> xenbus_probe_backend_init bus registered ok
>>>>>
>>>>> xenbus_probe_frontend_init bus registered ok
>>>>>
>>>>> Event-channel device installed.
>>>>>
>>>>> ***blkif_init
>>>>>
>>>>> Real Time Clock Driver v1.12ac
>>>>>
>>>>> Linux agpgart interface v0.103
>>>>>
>>>>> floppy0: Unable to grab IRQ6 for the floppy driver
>>>>>
>>>>> brd: module loaded
>>>>>
>>>>> loop: module loaded
>>>>>
>>>>> tun: Universal TUN/TAP device driver, 1.6
>>>>>
>>>>> tun: (C) 1999-2004 Max Krasnyansky <maxk@qualcomm.com>
>>>>>
>>>>> console [netcon0]
>>>>>
>> enabled
>>
>>>>> netconsole: network logging started
>>>>>
>>>>> Driver 'sd' needs updating - please use bus_type methods
>>>>>
>>>>> Driver 'sr' needs updating - please use bus_type methods
>>>>>
>>>>> xen_set_ioapic_routing: irq 31 gsi 18 vector 160 ioapic 0 pin 18
>>>>> triggering 0 polarity 1
>>>>>
>>>>> ahci 0000:00:1f.2: PCI INT C -> GSI 18 (level, low) -> IRQ
>>>>>
>> 31
>>
>>>>> xen: PCI device 0000:00:1f.2 pin 3 -> irq 31
>>>>>
>>>>> ahci 0000:00:1f.2: AHCI 0001.0200 32 slots 6 ports 3 Gbps 0x27
>>>>>
>> impl
>>
>>> SATA
>>>
>>>>> mode
>>>>>
>>>>> ahci 0000:00:1f.2: flags: 64bit ncq sntf pm led clo pmp pio slum
>>>>>
>> part
>>
>>> ems
>>>
>>>>> (XEN) unexpected IRQ trap at vector 59
>>>>>
>>>>> (XEN) unexpected IRQ trap at vector
>>>>>
>> 59
>>
>>>>> scsi0 : ahci
>>>>>
>>>>> scsi1 : ahci
>>>>>
>>>>> scsi2 : ahci
>>>>>
>>>>> scsi3 : ahci
>>>>>
>>>>> scsi4 : ahci
>>>>>
>>>>> scsi5 : ahci
>>>>>
>>>>> ata1: SATA max UDMA/133 abar m2048@0xff970000 port 0xff970100 irq
>>>>>
>> 1277
>>
>>>>> ata2: SATA max UDMA/133 abar m2048@0xff970000 port 0xff970180 irq
>>>>>
>> 1277
>>
>>>>> ata3: SATA max UDMA/133 abar m2048@0xff970000 port 0xff970200 irq
>>>>>
>> 1277
>>
>>>>> ata4: DUMMY
>>>>>
>>>>> ata5: DUMMY
>>>>>
>>>>> ata6: SATA max UDMA/133 abar m2048@0xff970000 port 0xff970380 irq
>>>>>
>> 1277
>>
>>>>> (XEN) unexpected IRQ trap at vector 59
>>>>>
>>>>> ata1: SATA link up 1.5 Gbps (SStatus 113 SControl
>>>>>
>> 300)
>>
>>>>> (XEN) unexpected IRQ trap at vector 59
>>>>>
>>>>> ata1.00: qc timeout (cmd 0xec)
>>>>>
>>>>> ata1.00: failed to IDENTIFY (I/O error, err_mask=0x4)
>>>>>
>>>>> (XEN) unexpected IRQ trap at vector 59
>>>>>
>>>>> ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
>>>>>
>>>>> (XEN) unexpected IRQ trap at vector 59
>>>>>
>>>>> ata1.00: qc timeout (cmd 0xec)
>>>>>
>>>>> ata1.00: failed to IDENTIFY (I/O error, err_mask=0x4)
>>>>>
>>>>> (XEN) unexpected IRQ trap at vector 59
>>>>>
>>>>> ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
>>>>>
>>>>> (XEN) unexpected IRQ trap at vector 59
>>>>>
>>>>> ata1.00: qc timeout (cmd 0xec)
>>>>>
>>>>> ata1.00: failed to IDENTIFY (I/O error,
>>>>>
>> err_mask=0x4)
>>
>>>>> (XEN) unexpected IRQ trap at vector 59
>>>>>
>>>>> ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
>>>>>
>>>>> ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
>>>>>
>>>>> (XEN) unexpected IRQ trap at vector 59
>>>>>
>>>>> ata2.00: qc timeout (cmd 0xa1)
>>>>>
>>>>> ata2.00: failed to IDENTIFY (I/O error, err_mask=0x4)
>>>>>
>>>>> ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
>>>>>
>>>>> (XEN) unexpected IRQ trap at vector 59
>>>>>
>>>>> ata2.00: qc timeout (cmd 0xa1)
>>>>>
>>>>> ata2.00: failed to IDENTIFY (I/O error, err_mask=0x4)
>>>>>
>>>>> ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
>>>>>
>>>>> (XEN) unexpected IRQ trap at vector
>>>>>
>> 59
>>
>>>>> ata2.00: qc timeout (cmd 0xa1)
>>>>>
>>>>> ata2.00: failed to IDENTIFY (I/O error, err_mask=0x4)
>>>>>
>>>>> ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
>>>>>
>>>>> ata3: SATA link down (SStatus 4 SControl 300)
>>>>>
>>>>> ata6: SATA link down (SStatus 4 SControl 300)
>>>>>
>>>>> PNP: No PS/2 controller found. Probing ports directly.
>>>>>
>>>>> i8042: probe of i8042 failed with error -38
>>>>>
>>>>> mice: PS/2 mouse device common for all mice
>>>>>
>>>>> device-mapper: ioctl: 4.14.0-ioctl (2008-04-23) initialised:
>>>>> dm-devel@redhat.com
>>>>>
>>>>> cpuidle: using governor ladder
>>>>>
>>>>> TCP cubic registered
>>>>>
>>>>> NET: Registered protocol family
>>>>>
>> 17
>>
>>>>> RPC: Registered udp transport module.
>>>>>
>>>>> RPC: Registered tcp transport module.
>>>>>
>>>>> IO APIC resources could be not be allocated.
>>>>>
>>>>> Root-NFS: No NFS server available, giving up.
>>>>>
>>>>> VFS: Unable to mount root fs via NFS, trying floppy.
>>>>>
>>>>> VFS: Insert root floppy and press ENTER
>>>>>
>>>>> Andy
>>>>>
>>>> Looks like it is not detecting the drive correctly.
>>>>
>>>> What is your specific controller?
>>>>
>>> The system is a Dell Optiplex 755 with Intel onboard sata, I'm having
>>> trouble finding the controller model and lspci only shows that it is
>>> AHCI:
>>> *********************************************************************
>>> When i open the box i can see the spec on South Bridge Chipset
>>> and
>>>
>> check with manual. Then enter setup and turn on AHCI, reboot
>>
>>> and load F8 for instance ( or just resque disk with 2.6.21 kernel)
>>> to make sure Linux kernel loads AHCI driver to detect SATA HDD
>>> Kernel 2.6.18 and above does detect AHCI mode on Intel's ICH(7,8,9)R,
>>> but not ICH(6,7,8.9) per Intel Storage Matrix this ones don't support
>>> AHCI.
>>> *********************************************************************
>>>
>>> 00:1f.2 SATA controller: Intel Corporation 6 port SATA AHCI Controller
>>>
>> (rev
>>
>>> 02)
>>>
>>> It is my Xen test server and has been running gentoo linux with both
>>> vanilla kernel 2.6.27 (no xen) and 2.6.27+opensuse xen dom0 patches, I
>>> wanted to start my pv_ops dom0 testing with a machine that I know can
>>> run Xen successfully.
>>>
>>> The HD is a Toshiba 2.5" drive as that is all I had to hand when I
>>> installed Gentoo Linux onto this machine,
>>>
>> do you think its worth
>>
>>> swapping that for a 3.5"? I've got a raptor lying around
>>>
>> somwhere...
>>
>>> Andy
>>>
>>>
>>>
>>>
>>>> Cheers,
>>>> Todd
>>>>
>>>> --
>>>> Todd Deshane
>>>> http://todddeshane.net
>>>> http://runningxen.com
>>>>
>>>>
>>> _______________________________________________
>>> Xen-devel mailing list
>>> Xen-devel@lists.xensource.com
>>> http://lists.xensource.com/xen-devel
>>>
>>>
>>>
>>>
>>>
>> --
>> Sent from my mobile device
>>
>>
>>
^ permalink raw reply [flat|nested] 22+ messages in thread
end of thread, other threads:[~2008-12-03 20:16 UTC | newest]
Thread overview: 22+ messages (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
2008-11-29 21:08 pv_ops dom0 testing Todd Deshane
2008-11-29 21:38 ` Aviv Grafi
2008-11-29 22:16 ` Todd Deshane
2008-11-29 22:32 ` Aviv Grafi
2008-11-29 23:05 ` Todd Deshane
2008-12-01 23:19 ` Jeremy Fitzhardinge
2008-12-02 2:49 ` Todd Deshane
-- strict thread matches above, loose matches on Subject: below --
2008-12-03 12:16 Andrew Lyon
2008-12-03 12:32 ` Boris Derzhavets
2008-12-03 15:08 ` Andrew Lyon
2008-12-03 15:37 ` Todd Deshane
2008-12-03 16:36 ` Andrew Lyon
2008-12-03 16:43 ` Todd Deshane
2008-12-03 17:10 ` Andrew Lyon
2008-12-03 17:49 ` Boris Derzhavets
2008-12-03 18:03 ` Andrew Lyon
2008-12-03 18:48 ` Boris Derzhavets
2008-12-03 18:55 ` Todd Deshane
2008-12-03 19:34 ` Andrew Lyon
2008-12-03 19:39 ` Andrew Lyon
2008-12-03 20:16 ` Jeremy Fitzhardinge
2008-12-03 17:36 Boris Derzhavets
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.