All of lore.kernel.org
 help / color / mirror / Atom feed
From: Li Zefan <lizf@cn.fujitsu.com>
To: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com>
Cc: Balbir Singh <balbir@linux.vnet.ibm.com>,
	LKML <linux-kernel@vger.kernel.org>,
	"linux-mm@kvack.org" <linux-mm@kvack.org>,
	Andrew Morton <akpm@linux-foundation.org>
Subject: [memcg BUG ?] failed to boot on IA64 with CONFIG_DISCONTIGMEM=y
Date: Fri, 05 Dec 2008 11:09:29 +0800	[thread overview]
Message-ID: <49389B69.9010902@cn.fujitsu.com> (raw)

Kernel version: 2.6.28-rc7
Arch: IA64
Memory model: DISCONTIGMEM

ELILO boot: Uncompressing Linux... done
Loading file initrd-2.6.28-rc7-lizf.img...done
(frozen)


Booted successfully with cgroup_disable=memory, here is the dmesg:

...
Number of logical nodes in system = 16
Number of memory chunks in system = 18
SMP: Allowing 128 CPUs, 120 hotplug CPUs
Initial ramdisk at: 0xe00000006afbc000 (4644000 bytes)
SAL 3.20: FUJITSU LIMITED PRIMEQUEST version 3.4
SAL Platform features: None
SAL: AP wakeup using external interrupt vector 0xf0
ACPI: Local APIC address c0000000fee00000
PLATFORM int CPEI (0x3): GSI 22 (level, low) -> CPU 0 (0x0000) vector 30
8 CPUs available, 128 CPUs total
MCA related initialization done
Virtual mem_map starts at 0xa07fffffc0c80000
Zone PFN ranges:
  DMA      0x00000100 -> 0x00010000
  Normal   0x00010000 -> 0x01210000
Movable zone start PFN for each node
early_node_map[3] active PFN ranges
    0: 0x00000100 -> 0x00006d00
    0: 0x00408000 -> 0x00410000
    1: 0x01200400 -> 0x01210000
On node 0 totalpages: 60416
free_area_init_node: node 0, pgdat e0000000011c0000, node_mem_map a07fffffc0c83800
  DMA zone: 56 pages used for memmap
  DMA zone: 0 pages reserved
  DMA zone: 27592 pages, LIFO batch:1
  Normal zone: 3584 pages used for memmap
  Normal zone: 29184 pages, LIFO batch:1
  Movable zone: 0 pages used for memmap
On node 1 totalpages: 64512
free_area_init_node: node 1, pgdat e0000120040d0080, node_mem_map a07fffffffc8e000
  DMA zone: 0 pages used for memmap
  Normal zone: 56 pages used for memmap
  Normal zone: 64456 pages, LIFO batch:1
  Movable zone: 0 pages used for memmap
Could not find start_pfn for node 2
On node 2 totalpages: 0
free_area_init_node: node 2, pgdat e000004080180100, node_mem_map a07fffffc0c80000
  DMA zone: 0 pages used for memmap
  Normal zone: 0 pages used for memmap
  Movable zone: 0 pages used for memmap
Could not find start_pfn for node 3
On node 3 totalpages: 0
free_area_init_node: node 3, pgdat e0000040802d0180, node_mem_map a07fffffc0c80000
  DMA zone: 0 pages used for memmap
  Normal zone: 0 pages used for memmap
  Movable zone: 0 pages used for memmap
Could not find start_pfn for node 4
On node 4 totalpages: 0
free_area_init_node: node 4, pgdat e0000040804a0200, node_mem_map a07fffffc0c80000
  DMA zone: 0 pages used for memmap
  Normal zone: 0 pages used for memmap
  Movable zone: 0 pages used for memmap
Could not find start_pfn for node 5
On node 5 totalpages: 0
free_area_init_node: node 5, pgdat e0000040805f0280, node_mem_map a07fffffc0c80000
  DMA zone: 0 pages used for memmap
  Normal zone: 0 pages used for memmap
  Movable zone: 0 pages used for memmap
Could not find start_pfn for node 6
On node 6 totalpages: 0
free_area_init_node: node 6, pgdat e0000040807c0300, node_mem_map a07fffffc0c80000
  DMA zone: 0 pages used for memmap
  Normal zone: 0 pages used for memmap
  Movable zone: 0 pages used for memmap
Could not find start_pfn for node 7
On node 7 totalpages: 0
free_area_init_node: node 7, pgdat e000004080910380, node_mem_map a07fffffc0c80000
  DMA zone: 0 pages used for memmap
  Normal zone: 0 pages used for memmap
  Movable zone: 0 pages used for memmap
Could not find start_pfn for node 8
On node 8 totalpages: 0
free_area_init_node: node 8, pgdat e000004080ad0400, node_mem_map a07fffffc0c80000
  DMA zone: 0 pages used for memmap
  Normal zone: 0 pages used for memmap
  Movable zone: 0 pages used for memmap
Could not find start_pfn for node 9
On node 9 totalpages: 0
free_area_init_node: node 9, pgdat e000004080c10480, node_mem_map a07fffffc0c80000
  DMA zone: 0 pages used for memmap
  Normal zone: 0 pages used for memmap
  Movable zone: 0 pages used for memmap
Could not find start_pfn for node 10
On node 10 totalpages: 0
free_area_init_node: node 10, pgdat e000004080dd0500, node_mem_map a07fffffc0c80000
  DMA zone: 0 pages used for memmap
  Normal zone: 0 pages used for memmap
  Movable zone: 0 pages used for memmap
Could not find start_pfn for node 11
On node 11 totalpages: 0
free_area_init_node: node 11, pgdat e000004080f10580, node_mem_map a07fffffc0c80000
  DMA zone: 0 pages used for memmap
  Normal zone: 0 pages used for memmap
  Movable zone: 0 pages used for memmap
Could not find start_pfn for node 12
On node 12 totalpages: 0
free_area_init_node: node 12, pgdat e0000040810d0600, node_mem_map a07fffffc0c80000
  DMA zone: 0 pages used for memmap
  Normal zone: 0 pages used for memmap
  Movable zone: 0 pages used for memmap
Could not find start_pfn for node 13
On node 13 totalpages: 0
free_area_init_node: node 13, pgdat e000004081210680, node_mem_map a07fffffc0c80000
  DMA zone: 0 pages used for memmap
  Normal zone: 0 pages used for memmap
  Movable zone: 0 pages used for memmap
Could not find start_pfn for node 14
On node 14 totalpages: 0
free_area_init_node: node 14, pgdat e0000040813d0700, node_mem_map a07fffffc0c80000
  DMA zone: 0 pages used for memmap
  Normal zone: 0 pages used for memmap
  Movable zone: 0 pages used for memmap
Could not find start_pfn for node 15
On node 15 totalpages: 0
free_area_init_node: node 15, pgdat e000004081510780, node_mem_map a07fffffc0c80000
  DMA zone: 0 pages used for memmap
  Normal zone: 0 pages used for memmap
  Movable zone: 0 pages used for memmap
Built 16 zonelists in Zone order, mobility grouping on.  Total pages: 121232
Policy zone: Normal
Kernel command line: BOOT_IMAGE=scsi0:EFI\redhat\vmlinuz-2.6.28-rc7-lizf  console=ttyS0 rhgb cgroup_disable=memory root=/dev/sda2 ro
Disabling memory control group subsystem
PID hash table entries: 4096 (order: 12, 32768 bytes)
CPU 0: base freq=266.666MHz, ITC ratio=6/4, ITC freq=399.999MHz
Console: colour VGA+ 80x25
Placing software IO TLB between 0x53d0000 - 0x93d0000
Memory: 7870144k/7970368k available (6617k code, 125248k reserved, 5996k data, 1728k init)
SLUB: Genslabs=17, HWalign=128, Order=0-3, MinObjects=0, CPUs=128, Nodes=1024
Calibrating delay loop... 3186.68 BogoMIPS (lpj=1593344)
Security Framework initialized
SELinux:  Initializing.
SELinux:  Starting in permissive mode
Dentry cache hash table entries: 1048576 (order: 7, 8388608 bytes)
Inode-cache hash table entries: 524288 (order: 6, 4194304 bytes)
Mount-cache hash table entries: 4096
Initializing cgroup subsys debug
Initializing cgroup subsys ns
Initializing cgroup subsys cpuacct
Initializing cgroup subsys memory
Initializing cgroup subsys devices
Initializing cgroup subsys freezer
ACPI: Core revision 20080926
Boot processor id 0x0/0x0
Fixed BSP b0 value from CPU 1
CPU 1: synchronized ITC with CPU 0 (last diff 1 cycles, maxerr 139 cycles)
CPU 1: base freq=266.666MHz, ITC ratio=6/4, ITC freq=399.999MHz
CPU 2: synchronized ITC with CPU 0 (last diff -1 cycles, maxerr 139 cycles)
CPU 2: base freq=266.666MHz, ITC ratio=6/4, ITC freq=399.999MHz
CPU 3: synchronized ITC with CPU 0 (last diff 1 cycles, maxerr 139 cycles)
CPU 3: base freq=266.666MHz, ITC ratio=6/4, ITC freq=399.999MHz
CPU 4: synchronized ITC with CPU 0 (last diff 0 cycles, maxerr 512 cycles)
CPU 4: base freq=266.666MHz, ITC ratio=6/4, ITC freq=399.999MHz
CPU 5: synchronized ITC with CPU 0 (last diff 0 cycles, maxerr 513 cycles)
CPU 5: base freq=266.666MHz, ITC ratio=6/4, ITC freq=399.999MHz
CPU 6: synchronized ITC with CPU 0 (last diff 0 cycles, maxerr 512 cycles)
CPU 6: base freq=266.666MHz, ITC ratio=6/4, ITC freq=399.999MHz
CPU 7: synchronized ITC with CPU 0 (last diff 0 cycles, maxerr 512 cycles)
CPU 7: base freq=266.666MHz, ITC ratio=6/4, ITC freq=399.999MHz
Brought up 8 CPUs
Total of 8 processors activated (25493.50 BogoMIPS).
...

WARNING: multiple messages have this Message-ID (diff)
From: Li Zefan <lizf@cn.fujitsu.com>
To: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com>
Cc: Balbir Singh <balbir@linux.vnet.ibm.com>,
	LKML <linux-kernel@vger.kernel.org>,
	"linux-mm@kvack.org" <linux-mm@kvack.org>,
	Andrew Morton <akpm@linux-foundation.org>
Subject: [memcg BUG ?] failed to boot on IA64 with CONFIG_DISCONTIGMEM=y
Date: Fri, 05 Dec 2008 11:09:29 +0800	[thread overview]
Message-ID: <49389B69.9010902@cn.fujitsu.com> (raw)

Kernel version: 2.6.28-rc7
Arch: IA64
Memory model: DISCONTIGMEM

ELILO boot: Uncompressing Linux... done
Loading file initrd-2.6.28-rc7-lizf.img...done
(frozen)


Booted successfully with cgroup_disable=memory, here is the dmesg:

...
Number of logical nodes in system = 16
Number of memory chunks in system = 18
SMP: Allowing 128 CPUs, 120 hotplug CPUs
Initial ramdisk at: 0xe00000006afbc000 (4644000 bytes)
SAL 3.20: FUJITSU LIMITED PRIMEQUEST version 3.4
SAL Platform features: None
SAL: AP wakeup using external interrupt vector 0xf0
ACPI: Local APIC address c0000000fee00000
PLATFORM int CPEI (0x3): GSI 22 (level, low) -> CPU 0 (0x0000) vector 30
8 CPUs available, 128 CPUs total
MCA related initialization done
Virtual mem_map starts at 0xa07fffffc0c80000
Zone PFN ranges:
  DMA      0x00000100 -> 0x00010000
  Normal   0x00010000 -> 0x01210000
Movable zone start PFN for each node
early_node_map[3] active PFN ranges
    0: 0x00000100 -> 0x00006d00
    0: 0x00408000 -> 0x00410000
    1: 0x01200400 -> 0x01210000
On node 0 totalpages: 60416
free_area_init_node: node 0, pgdat e0000000011c0000, node_mem_map a07fffffc0c83800
  DMA zone: 56 pages used for memmap
  DMA zone: 0 pages reserved
  DMA zone: 27592 pages, LIFO batch:1
  Normal zone: 3584 pages used for memmap
  Normal zone: 29184 pages, LIFO batch:1
  Movable zone: 0 pages used for memmap
On node 1 totalpages: 64512
free_area_init_node: node 1, pgdat e0000120040d0080, node_mem_map a07fffffffc8e000
  DMA zone: 0 pages used for memmap
  Normal zone: 56 pages used for memmap
  Normal zone: 64456 pages, LIFO batch:1
  Movable zone: 0 pages used for memmap
Could not find start_pfn for node 2
On node 2 totalpages: 0
free_area_init_node: node 2, pgdat e000004080180100, node_mem_map a07fffffc0c80000
  DMA zone: 0 pages used for memmap
  Normal zone: 0 pages used for memmap
  Movable zone: 0 pages used for memmap
Could not find start_pfn for node 3
On node 3 totalpages: 0
free_area_init_node: node 3, pgdat e0000040802d0180, node_mem_map a07fffffc0c80000
  DMA zone: 0 pages used for memmap
  Normal zone: 0 pages used for memmap
  Movable zone: 0 pages used for memmap
Could not find start_pfn for node 4
On node 4 totalpages: 0
free_area_init_node: node 4, pgdat e0000040804a0200, node_mem_map a07fffffc0c80000
  DMA zone: 0 pages used for memmap
  Normal zone: 0 pages used for memmap
  Movable zone: 0 pages used for memmap
Could not find start_pfn for node 5
On node 5 totalpages: 0
free_area_init_node: node 5, pgdat e0000040805f0280, node_mem_map a07fffffc0c80000
  DMA zone: 0 pages used for memmap
  Normal zone: 0 pages used for memmap
  Movable zone: 0 pages used for memmap
Could not find start_pfn for node 6
On node 6 totalpages: 0
free_area_init_node: node 6, pgdat e0000040807c0300, node_mem_map a07fffffc0c80000
  DMA zone: 0 pages used for memmap
  Normal zone: 0 pages used for memmap
  Movable zone: 0 pages used for memmap
Could not find start_pfn for node 7
On node 7 totalpages: 0
free_area_init_node: node 7, pgdat e000004080910380, node_mem_map a07fffffc0c80000
  DMA zone: 0 pages used for memmap
  Normal zone: 0 pages used for memmap
  Movable zone: 0 pages used for memmap
Could not find start_pfn for node 8
On node 8 totalpages: 0
free_area_init_node: node 8, pgdat e000004080ad0400, node_mem_map a07fffffc0c80000
  DMA zone: 0 pages used for memmap
  Normal zone: 0 pages used for memmap
  Movable zone: 0 pages used for memmap
Could not find start_pfn for node 9
On node 9 totalpages: 0
free_area_init_node: node 9, pgdat e000004080c10480, node_mem_map a07fffffc0c80000
  DMA zone: 0 pages used for memmap
  Normal zone: 0 pages used for memmap
  Movable zone: 0 pages used for memmap
Could not find start_pfn for node 10
On node 10 totalpages: 0
free_area_init_node: node 10, pgdat e000004080dd0500, node_mem_map a07fffffc0c80000
  DMA zone: 0 pages used for memmap
  Normal zone: 0 pages used for memmap
  Movable zone: 0 pages used for memmap
Could not find start_pfn for node 11
On node 11 totalpages: 0
free_area_init_node: node 11, pgdat e000004080f10580, node_mem_map a07fffffc0c80000
  DMA zone: 0 pages used for memmap
  Normal zone: 0 pages used for memmap
  Movable zone: 0 pages used for memmap
Could not find start_pfn for node 12
On node 12 totalpages: 0
free_area_init_node: node 12, pgdat e0000040810d0600, node_mem_map a07fffffc0c80000
  DMA zone: 0 pages used for memmap
  Normal zone: 0 pages used for memmap
  Movable zone: 0 pages used for memmap
Could not find start_pfn for node 13
On node 13 totalpages: 0
free_area_init_node: node 13, pgdat e000004081210680, node_mem_map a07fffffc0c80000
  DMA zone: 0 pages used for memmap
  Normal zone: 0 pages used for memmap
  Movable zone: 0 pages used for memmap
Could not find start_pfn for node 14
On node 14 totalpages: 0
free_area_init_node: node 14, pgdat e0000040813d0700, node_mem_map a07fffffc0c80000
  DMA zone: 0 pages used for memmap
  Normal zone: 0 pages used for memmap
  Movable zone: 0 pages used for memmap
Could not find start_pfn for node 15
On node 15 totalpages: 0
free_area_init_node: node 15, pgdat e000004081510780, node_mem_map a07fffffc0c80000
  DMA zone: 0 pages used for memmap
  Normal zone: 0 pages used for memmap
  Movable zone: 0 pages used for memmap
Built 16 zonelists in Zone order, mobility grouping on.  Total pages: 121232
Policy zone: Normal
Kernel command line: BOOT_IMAGE=scsi0:EFI\redhat\vmlinuz-2.6.28-rc7-lizf  console=ttyS0 rhgb cgroup_disable=memory root=/dev/sda2 ro
Disabling memory control group subsystem
PID hash table entries: 4096 (order: 12, 32768 bytes)
CPU 0: base freq=266.666MHz, ITC ratio=6/4, ITC freq=399.999MHz
Console: colour VGA+ 80x25
Placing software IO TLB between 0x53d0000 - 0x93d0000
Memory: 7870144k/7970368k available (6617k code, 125248k reserved, 5996k data, 1728k init)
SLUB: Genslabs=17, HWalign=128, Order=0-3, MinObjects=0, CPUs=128, Nodes=1024
Calibrating delay loop... 3186.68 BogoMIPS (lpj=1593344)
Security Framework initialized
SELinux:  Initializing.
SELinux:  Starting in permissive mode
Dentry cache hash table entries: 1048576 (order: 7, 8388608 bytes)
Inode-cache hash table entries: 524288 (order: 6, 4194304 bytes)
Mount-cache hash table entries: 4096
Initializing cgroup subsys debug
Initializing cgroup subsys ns
Initializing cgroup subsys cpuacct
Initializing cgroup subsys memory
Initializing cgroup subsys devices
Initializing cgroup subsys freezer
ACPI: Core revision 20080926
Boot processor id 0x0/0x0
Fixed BSP b0 value from CPU 1
CPU 1: synchronized ITC with CPU 0 (last diff 1 cycles, maxerr 139 cycles)
CPU 1: base freq=266.666MHz, ITC ratio=6/4, ITC freq=399.999MHz
CPU 2: synchronized ITC with CPU 0 (last diff -1 cycles, maxerr 139 cycles)
CPU 2: base freq=266.666MHz, ITC ratio=6/4, ITC freq=399.999MHz
CPU 3: synchronized ITC with CPU 0 (last diff 1 cycles, maxerr 139 cycles)
CPU 3: base freq=266.666MHz, ITC ratio=6/4, ITC freq=399.999MHz
CPU 4: synchronized ITC with CPU 0 (last diff 0 cycles, maxerr 512 cycles)
CPU 4: base freq=266.666MHz, ITC ratio=6/4, ITC freq=399.999MHz
CPU 5: synchronized ITC with CPU 0 (last diff 0 cycles, maxerr 513 cycles)
CPU 5: base freq=266.666MHz, ITC ratio=6/4, ITC freq=399.999MHz
CPU 6: synchronized ITC with CPU 0 (last diff 0 cycles, maxerr 512 cycles)
CPU 6: base freq=266.666MHz, ITC ratio=6/4, ITC freq=399.999MHz
CPU 7: synchronized ITC with CPU 0 (last diff 0 cycles, maxerr 512 cycles)
CPU 7: base freq=266.666MHz, ITC ratio=6/4, ITC freq=399.999MHz
Brought up 8 CPUs
Total of 8 processors activated (25493.50 BogoMIPS).
...

--
To unsubscribe, send a message with 'unsubscribe linux-mm' in
the body to majordomo@kvack.org.  For more info on Linux MM,
see: http://www.linux-mm.org/ .
Don't email: <a href=mailto:"dont@kvack.org"> email@kvack.org </a>

             reply	other threads:[~2008-12-05  3:11 UTC|newest]

Thread overview: 14+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2008-12-05  3:09 Li Zefan [this message]
2008-12-05  3:09 ` [memcg BUG ?] failed to boot on IA64 with CONFIG_DISCONTIGMEM=y Li Zefan
2008-12-05  3:20 ` KAMEZAWA Hiroyuki
2008-12-05  3:20   ` KAMEZAWA Hiroyuki
2008-12-05  3:24   ` KAMEZAWA Hiroyuki
2008-12-05  3:24     ` KAMEZAWA Hiroyuki
2008-12-05  3:31     ` Li Zefan
2008-12-05  3:31       ` Li Zefan
2008-12-05  3:49       ` KAMEZAWA Hiroyuki
2008-12-05  3:49         ` KAMEZAWA Hiroyuki
2008-12-07  8:31     ` Andrew Morton
2008-12-07  8:31       ` Andrew Morton
2008-12-07 12:34       ` KAMEZAWA Hiroyuki
2008-12-07 12:34         ` KAMEZAWA Hiroyuki

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=49389B69.9010902@cn.fujitsu.com \
    --to=lizf@cn.fujitsu.com \
    --cc=akpm@linux-foundation.org \
    --cc=balbir@linux.vnet.ibm.com \
    --cc=kamezawa.hiroyu@jp.fujitsu.com \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-mm@kvack.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.