From: Joseph Cheek <joseph@cheek.com>
To: ath9k-devel@lists.ath9k.org
Subject: [ath9k-devel] 2.6.27 with compat-wireless-2008-12-31 stops transmitting every 2-3 mins
Date: Mon, 5 Jan 2009 15:01:32 -0500 [thread overview]
Message-ID: <4962671C.9080605@cheek.com> (raw)
In-Reply-To: <20090105181250.GD6834@tesla>
thanks, Luis! comments below...
Luis R. Rodriguez wrote:
> Thanks for the details, this seems to be related to noise and therefore
> could be due to some issues with how we deal with ANI. We will have to
> try to reproduce this ourselves now and try to fix it.
>
great! i wish you luck! would it help it i try the same test with the
problematic box right next to the AP? I could move it upstairs to the
same room and retry an SCP or video serve. not sure if that would give
you more useful data or not, but i can certainly move it.
if the box were quiet enough, i would keep it in the same room and just
connect via ethernet 8-).
>> I can try anything you need me to with respect to ath9k drivers or
>> kernels. does it matter if bluetooth and/or ipv6 is enabled? both are
>> enabled on this box but not on my laptop?
>>
>
> Anything communication on the same spectrum affects your 802.11 connection,
> so using the microwave oven, using bluetooth, or a 2.4 GHz home phone should
> affet your connection. Not sure the freq used by Xbox / PS3 controllers...
> Bluetooth particularly should affect your 802.11 connection and we only recently
> added bluetooth coexistance to help with this but this is only available for
> more modern cards so your card does not have this feature.
>
> If you are using bluetooth then it should affect your connection if using the
> 2.4 GHz spectrum on your wirless AP.
>
I didn't actually have the bluetooth in use, just the module built. so
that might not be the problem. the DIR-655 will do 5MHz only if it's in
n-only mode, and I have too many g devices in the house to want to
replace them all 8-).
> Luis
>
WARNING: multiple messages have this Message-ID (diff)
From: Joseph Cheek <joseph@cheek.com>
To: "Luis R. Rodriguez" <lrodriguez@atheros.com>
Cc: "ath9k-devel@lists.ath9k.org" <ath9k-devel@lists.ath9k.org>,
"linux-wireless@vger.kernel.org" <linux-wireless@vger.kernel.org>
Subject: Re: [ath9k-devel] 2.6.27 with compat-wireless-2008-12-31 stops transmitting every 2-3 mins
Date: Mon, 5 Jan 2009 15:01:32 -0500 [thread overview]
Message-ID: <4962671C.9080605@cheek.com> (raw)
In-Reply-To: <20090105181250.GD6834@tesla>
thanks, Luis! comments below...
Luis R. Rodriguez wrote:
> Thanks for the details, this seems to be related to noise and therefore
> could be due to some issues with how we deal with ANI. We will have to
> try to reproduce this ourselves now and try to fix it.
>
great! i wish you luck! would it help it i try the same test with the
problematic box right next to the AP? I could move it upstairs to the
same room and retry an SCP or video serve. not sure if that would give
you more useful data or not, but i can certainly move it.
if the box were quiet enough, i would keep it in the same room and just
connect via ethernet 8-).
>> I can try anything you need me to with respect to ath9k drivers or
>> kernels. does it matter if bluetooth and/or ipv6 is enabled? both are
>> enabled on this box but not on my laptop?
>>
>
> Anything communication on the same spectrum affects your 802.11 connection,
> so using the microwave oven, using bluetooth, or a 2.4 GHz home phone should
> affet your connection. Not sure the freq used by Xbox / PS3 controllers...
> Bluetooth particularly should affect your 802.11 connection and we only recently
> added bluetooth coexistance to help with this but this is only available for
> more modern cards so your card does not have this feature.
>
> If you are using bluetooth then it should affect your connection if using the
> 2.4 GHz spectrum on your wirless AP.
>
I didn't actually have the bluetooth in use, just the module built. so
that might not be the problem. the DIR-655 will do 5MHz only if it's in
n-only mode, and I have too many g devices in the house to want to
replace them all 8-).
> Luis
>
next prev parent reply other threads:[~2009-01-05 20:01 UTC|newest]
Thread overview: 23+ messages / expand[flat|nested] mbox.gz Atom feed top
2009-01-01 7:52 [ath9k-devel] 2.6.2{7, 8} with compat-wireless-2008-12-3{0, 1) drops link every 2-3 minutes Joseph Cheek
2009-01-05 17:04 ` Luis R. Rodriguez
2009-01-05 17:04 ` Luis R. Rodriguez
2009-01-05 18:01 ` [ath9k-devel] 2.6.27 with compat-wireless-2008-12-31 stops transmitting " Joseph Cheek
2009-01-05 18:01 ` Joseph Cheek
2009-01-05 18:12 ` Luis R. Rodriguez
2009-01-05 18:12 ` Luis R. Rodriguez
2009-01-05 19:47 ` Joseph Cheek
2009-01-05 19:47 ` Joseph Cheek
2009-01-05 19:51 ` Luis R. Rodriguez
2009-01-05 19:51 ` Luis R. Rodriguez
2009-01-05 20:15 ` Luis R. Rodriguez
2009-01-05 20:15 ` Luis R. Rodriguez
2009-01-05 20:01 ` Joseph Cheek [this message]
2009-01-05 20:01 ` [ath9k-devel] 2.6.27 with compat-wireless-2008-12-31 stops transmitting every 2-3 mins Joseph Cheek
2009-01-06 15:42 ` [ath9k-devel] 2.6.27 with compat-wireless-2008-12-31 stops transmitting every 2-3 minutes Joseph Cheek
2009-01-06 15:42 ` Joseph Cheek
2009-01-15 18:37 ` [ath9k-devel] [stable] 2.6.2{7, 8} with compat-wireless-2008-12-3{0, 1) drops link " Greg KH
2009-01-15 18:37 ` [stable] [ath9k-devel] " Greg KH
2009-01-15 20:25 ` [ath9k-devel] [stable] " Luis R. Rodriguez
2009-01-15 20:25 ` [stable] [ath9k-devel] " Luis R. Rodriguez
2009-01-15 21:02 ` [ath9k-devel] [stable] " Greg KH
2009-01-15 21:02 ` [stable] [ath9k-devel] " Greg KH
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=4962671C.9080605@cheek.com \
--to=joseph@cheek.com \
--cc=ath9k-devel@lists.ath9k.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.