Re: [lm-sensors] Patch: libsensors: add support for ACPI bus

[Hans de Goede <hdegoede@redhat.com>]

Jean Delvare wrote:
> Hi Hans,
> 
> Sorry for the late answer.
> 
> On Thu, 01 Jan 2009 22:51:56 +0100, Hans de Goede wrote:
>> The way the new atk0110 driver work it ends up being connected to an "ACPI" 
>> bus, this patch adds support for this to lm_sensors-3.0.3
>>
>> With this patch the sensors output on an Asus board looks like this:
>>
>> atk0110-acpi-0
>> Adapter: ACPI interface
>> Vcore Voltage:          +1.45 V  (min =  +1.45 V, max =  +1.75 V)
>>   +3.3 Voltage:          +3.38 V  (min =  +3.00 V, max =  +3.60 V)
>>   +5.0 Voltage:          +5.16 V  (min =  +4.50 V, max =  +5.50 V)
>> +12.0 Voltage:         +12.24 V  (min = +11.20 V, max = +13.20 V)
>> CPU FAN Speed:         1516 RPM  (min =    0 RPM)
>> CHASSIS FAN Speed:        0 RPM  (min =    0 RPM)
>> POWER FAN Speed:          0 RPM  (min =    0 RPM)
>> CHASSIS4 FAN FAN Speed:   0 RPM  (min =    0 RPM)
>> CHASSIS2 FAN FAN Speed:   0 RPM  (min =    0 RPM)
>> CHASSIS3 FAN FAN Speed:   0 RPM  (min =    0 RPM)
>> CPU Temperature:        +43.0°C  (high = +90.0°C, crit = +125.0°C)
>> MB Temperature:         +44.0°C  (high = +45.0°C, crit = +90.0°C)
>>
>>
>> Jean, can you please review this patch, if its ok I can apply it myself.
> 
> I have no objection, the patch looks just fine to me, just go ahead and
> apply it. Please don't forget to apply the libsensors-API document.
> 

Thanks for the review, API doc updated and committed.

Regards,

Hans

_______________________________________________
lm-sensors mailing list
lm-sensors@lm-sensors.org
http://lists.lm-sensors.org/mailman/listinfo/lm-sensors