* [Qemu-devel] [PATCH -v2] gdbstub: Add vCont support
@ 2009-01-14 16:56 Jan Kiszka
2009-01-14 18:38 ` Krumme, Chris
0 siblings, 1 reply; 3+ messages in thread
From: Jan Kiszka @ 2009-01-14 16:56 UTC (permalink / raw)
To: qemu-devel@nongnu.org
[ Fix signal forwarding, properly handle unknown v-packets. ]
In order to set the VCPU for the next single-step command, you need gdb
6.8 or better - and this patch. It enhances the existing support for
representing VCPUs as threads to the gdb frontend by introducing the
vCont remote gdb command. This is used by gdb to switch the debugging
focus for single-stepping multi-threaded targets.
Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com>
---
gdbstub.c | 58 ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
1 files changed, 58 insertions(+), 0 deletions(-)
diff --git a/gdbstub.c b/gdbstub.c
index 0bcd5d5..d9f197f 100644
--- a/gdbstub.c
+++ b/gdbstub.c
@@ -1542,6 +1542,64 @@ static int gdb_handle_packet(GDBState *s, const char *line_buf)
s->signal = 0;
gdb_continue(s);
return RS_IDLE;
+ case 'v':
+ if (strncmp(p, "Cont", 4) == 0) {
+ int res_signal, res_thread;
+
+ p += 4;
+ if (*p == '?') {
+ put_packet(s, "vCont;c;C;s;S");
+ break;
+ }
+ res = 0;
+ res_signal = 0;
+ res_thread = 0;
+ while (*p) {
+ int action, signal;
+
+ if (*p++ != ';') {
+ res = 0;
+ break;
+ }
+ action = *p++;
+ signal = 0;
+ if (action == 'C' || action == 'S')
+ signal = strtoul(p, (char **)&p, 16);
+ else if (action != 'c' && action != 's') {
+ res = 0;
+ break;
+ }
+ thread = 0;
+ if (*p == ':')
+ thread = strtoull(p+1, (char **)&p, 16);
+
+ action = tolower(action);
+ if (res == 0 || (res == 'c' && action == 's')) {
+ res = action;
+ res_signal = signal;
+ res_thread = thread;
+ }
+ }
+ if (res) {
+ if (res_thread != -1 && res_thread != 0) {
+ for (env = first_cpu; env != NULL; env = env->next_cpu)
+ if (env->cpu_index + 1 == res_thread)
+ break;
+ if (env == NULL) {
+ put_packet(s, "E22");
+ break;
+ }
+ s->c_cpu = env;
+ }
+ if (res == 's')
+ cpu_single_step(s->c_cpu, sstep_flags);
+ s->signal = res_signal;
+ gdb_continue(s);
+ return RS_IDLE;
+ }
+ break;
+ } else
+ goto unknown_command;
case 'k':
/* Kill the target */
fprintf(stderr, "\nQEMU: Terminated via GDBstub\n");
^ permalink raw reply related [flat|nested] 3+ messages in thread* RE: [Qemu-devel] [PATCH -v2] gdbstub: Add vCont support
2009-01-14 16:56 [Qemu-devel] [PATCH -v2] gdbstub: Add vCont support Jan Kiszka
@ 2009-01-14 18:38 ` Krumme, Chris
2009-01-14 21:36 ` [Qemu-devel] " Jan Kiszka
0 siblings, 1 reply; 3+ messages in thread
From: Krumme, Chris @ 2009-01-14 18:38 UTC (permalink / raw)
To: qemu-devel
> -----Original Message-----
> From:
> qemu-devel-bounces+chris.krumme=windriver.com@nongnu.org
> [mailto:qemu-devel-bounces+chris.krumme=windriver.com@nongnu.o
> rg] On Behalf Of Jan Kiszka
> Sent: Wednesday, January 14, 2009 10:57 AM
> To: qemu-devel@nongnu.org
> Subject: [Qemu-devel] [PATCH -v2] gdbstub: Add vCont support
>
> [ Fix signal forwarding, properly handle unknown v-packets. ]
>
> In order to set the VCPU for the next single-step command,
> you need gdb
> 6.8 or better - and this patch. It enhances the existing support for
> representing VCPUs as threads to the gdb frontend by introducing the
> vCont remote gdb command. This is used by gdb to switch the debugging
> focus for single-stepping multi-threaded targets.
>
> Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com>
> ---
>
> gdbstub.c | 58
> ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
> 1 files changed, 58 insertions(+), 0 deletions(-)
>
> diff --git a/gdbstub.c b/gdbstub.c
> index 0bcd5d5..d9f197f 100644
> --- a/gdbstub.c
> +++ b/gdbstub.c
> @@ -1542,6 +1542,64 @@ static int gdb_handle_packet(GDBState
> *s, const char *line_buf)
> s->signal = 0;
> gdb_continue(s);
> return RS_IDLE;
> + case 'v':
> + if (strncmp(p, "Cont", 4) == 0) {
> + int res_signal, res_thread;
> +
> + p += 4;
> + if (*p == '?') {
> + put_packet(s, "vCont;c;C;s;S");
> + break;
> + }
> + res = 0;
> + res_signal = 0;
> + res_thread = 0;
> + while (*p) {
> + int action, signal;
> +
> + if (*p++ != ';') {
> + res = 0;
> + break;
> + }
> + action = *p++;
> + signal = 0;
> + if (action == 'C' || action == 'S')
> + signal = strtoul(p, (char **)&p, 16);
> + else if (action != 'c' && action != 's') {
> + res = 0;
> + break;
> + }
> + thread = 0;
> + if (*p == ':')
> + thread = strtoull(p+1, (char **)&p, 16);
> +
> + action = tolower(action);
> + if (res == 0 || (res == 'c' && action == 's')) {
> + res = action;
> + res_signal = signal;
> + res_thread = thread;
> + }
> + }
> + if (res) {
> + if (res_thread != -1 && res_thread != 0) {
> + for (env = first_cpu; env != NULL; env =
> env->next_cpu)
> + if (env->cpu_index + 1 == res_thread)
> + break;
> + if (env == NULL) {
> + put_packet(s, "E22");
> + break;
> + }
> + s->c_cpu = env;
> + }
> + if (res == 's')
> + cpu_single_step(s->c_cpu, sstep_flags);
Sorry I am not more familure with the code, but does cpu_single_step
need to know about the res_signal?
Thanks
Chris
> + s->signal = res_signal;
> + gdb_continue(s);
> + return RS_IDLE;
> + }
> + break;
> + } else
> + goto unknown_command;
> case 'k':
> /* Kill the target */
> fprintf(stderr, "\nQEMU: Terminated via GDBstub\n");
>
>
>
>
^ permalink raw reply [flat|nested] 3+ messages in thread* [Qemu-devel] Re: [PATCH -v2] gdbstub: Add vCont support
2009-01-14 18:38 ` Krumme, Chris
@ 2009-01-14 21:36 ` Jan Kiszka
0 siblings, 0 replies; 3+ messages in thread
From: Jan Kiszka @ 2009-01-14 21:36 UTC (permalink / raw)
To: qemu-devel
[-- Attachment #1: Type: text/plain, Size: 3569 bytes --]
Krumme, Chris wrote:
>
>
>> -----Original Message-----
>> From:
>> qemu-devel-bounces+chris.krumme=windriver.com@nongnu.org
>> [mailto:qemu-devel-bounces+chris.krumme=windriver.com@nongnu.o
>> rg] On Behalf Of Jan Kiszka
>> Sent: Wednesday, January 14, 2009 10:57 AM
>> To: qemu-devel@nongnu.org
>> Subject: [Qemu-devel] [PATCH -v2] gdbstub: Add vCont support
>>
>> [ Fix signal forwarding, properly handle unknown v-packets. ]
>>
>> In order to set the VCPU for the next single-step command,
>> you need gdb
>> 6.8 or better - and this patch. It enhances the existing support for
>> representing VCPUs as threads to the gdb frontend by introducing the
>> vCont remote gdb command. This is used by gdb to switch the debugging
>> focus for single-stepping multi-threaded targets.
>>
>> Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com>
>> ---
>>
>> gdbstub.c | 58
>> ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
>> 1 files changed, 58 insertions(+), 0 deletions(-)
>>
>> diff --git a/gdbstub.c b/gdbstub.c
>> index 0bcd5d5..d9f197f 100644
>> --- a/gdbstub.c
>> +++ b/gdbstub.c
>> @@ -1542,6 +1542,64 @@ static int gdb_handle_packet(GDBState
>> *s, const char *line_buf)
>> s->signal = 0;
>> gdb_continue(s);
>> return RS_IDLE;
>> + case 'v':
>> + if (strncmp(p, "Cont", 4) == 0) {
>> + int res_signal, res_thread;
>> +
>> + p += 4;
>> + if (*p == '?') {
>> + put_packet(s, "vCont;c;C;s;S");
>> + break;
>> + }
>> + res = 0;
>> + res_signal = 0;
>> + res_thread = 0;
>> + while (*p) {
>> + int action, signal;
>> +
>> + if (*p++ != ';') {
>> + res = 0;
>> + break;
>> + }
>> + action = *p++;
>> + signal = 0;
>> + if (action == 'C' || action == 'S')
>> + signal = strtoul(p, (char **)&p, 16);
>> + else if (action != 'c' && action != 's') {
>> + res = 0;
>> + break;
>> + }
>> + thread = 0;
>> + if (*p == ':')
>> + thread = strtoull(p+1, (char **)&p, 16);
>> +
>> + action = tolower(action);
>> + if (res == 0 || (res == 'c' && action == 's')) {
>> + res = action;
>> + res_signal = signal;
>> + res_thread = thread;
>> + }
>> + }
>> + if (res) {
>> + if (res_thread != -1 && res_thread != 0) {
>> + for (env = first_cpu; env != NULL; env =
>> env->next_cpu)
>> + if (env->cpu_index + 1 == res_thread)
>> + break;
>> + if (env == NULL) {
>> + put_packet(s, "E22");
>> + break;
>> + }
>> + s->c_cpu = env;
>> + }
>> + if (res == 's')
>> + cpu_single_step(s->c_cpu, sstep_flags);
>
> Sorry I am not more familure with the code, but does cpu_single_step
> need to know about the res_signal?
>
Nope, cpu_single_step just toggles the switch that future guest code
execution should single-step and flushes translated code buffers (when
in emulation mode).
Jan
[-- Attachment #2: OpenPGP digital signature --]
[-- Type: application/pgp-signature, Size: 257 bytes --]
^ permalink raw reply [flat|nested] 3+ messages in thread
end of thread, other threads:[~2009-01-14 21:36 UTC | newest]
Thread overview: 3+ messages (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
2009-01-14 16:56 [Qemu-devel] [PATCH -v2] gdbstub: Add vCont support Jan Kiszka
2009-01-14 18:38 ` Krumme, Chris
2009-01-14 21:36 ` [Qemu-devel] " Jan Kiszka
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.