* [Qemu-devel] [PATCH 1/3] Use macros for virtio-net PCI vendor/device IDs @ 2009-01-16 11:12 Mark McLoughlin 2009-01-16 11:12 ` [Qemu-devel] [PATCH 2/3] Add macro for virtio-console PCI device ID Mark McLoughlin 0 siblings, 1 reply; 5+ messages in thread From: Mark McLoughlin @ 2009-01-16 11:12 UTC (permalink / raw) To: Anthony Liguori; +Cc: Mark McLoughlin, qemu-devel Gerd added these macros a while back. Signed-off-by: Mark McLoughlin <markmc@redhat.com> --- hw/virtio-net.c | 4 +++- 1 files changed, 3 insertions(+), 1 deletions(-) diff --git a/hw/virtio-net.c b/hw/virtio-net.c index 54c0030..b13914a 100644 --- a/hw/virtio-net.c +++ b/hw/virtio-net.c @@ -320,7 +320,9 @@ void virtio_net_init(PCIBus *bus, NICInfo *nd, int devfn) VirtIONet *n; static int virtio_net_id; - n = (VirtIONet *)virtio_init_pci(bus, "virtio-net", 6900, 0x1000, + n = (VirtIONet *)virtio_init_pci(bus, "virtio-net", + PCI_VENDOR_ID_REDHAT_QUMRANET, + PCI_DEVICE_ID_VIRTIO_NET, 0, VIRTIO_ID_NET, 0x02, 0x00, 0x00, sizeof(struct virtio_net_config), -- 1.6.0.6 ^ permalink raw reply related [flat|nested] 5+ messages in thread
* [Qemu-devel] [PATCH 2/3] Add macro for virtio-console PCI device ID 2009-01-16 11:12 [Qemu-devel] [PATCH 1/3] Use macros for virtio-net PCI vendor/device IDs Mark McLoughlin @ 2009-01-16 11:12 ` Mark McLoughlin 2009-01-16 11:12 ` [Qemu-devel] [PATCH 3/3] Use the default subsystem vendor ID for virtio devices Mark McLoughlin ` (2 more replies) 0 siblings, 3 replies; 5+ messages in thread From: Mark McLoughlin @ 2009-01-16 11:12 UTC (permalink / raw) To: Anthony Liguori; +Cc: Mark McLoughlin, qemu-devel Also use the existing macro for the PCI vendor ID Signed-off-by: Mark McLoughlin <markmc@redhat.com> --- hw/pci.h | 1 + hw/virtio-console.c | 3 ++- 2 files changed, 3 insertions(+), 1 deletions(-) diff --git a/hw/pci.h b/hw/pci.h index 76f4474..e791141 100644 --- a/hw/pci.h +++ b/hw/pci.h @@ -16,6 +16,7 @@ extern target_phys_addr_t pci_mem_base; #define PCI_DEVICE_ID_VIRTIO_NET 0x1000 #define PCI_DEVICE_ID_VIRTIO_BLOCK 0x1001 #define PCI_DEVICE_ID_VIRTIO_BALLOON 0x1002 +#define PCI_DEVICE_ID_VIRTIO_CONSOLE 0x1003 typedef void PCIConfigWriteFunc(PCIDevice *pci_dev, uint32_t address, uint32_t data, int len); diff --git a/hw/virtio-console.c b/hw/virtio-console.c index deae76d..ce20c91 100644 --- a/hw/virtio-console.c +++ b/hw/virtio-console.c @@ -126,7 +126,8 @@ void *virtio_console_init(PCIBus *bus, CharDriverState *chr) VirtIOConsole *s; s = (VirtIOConsole *)virtio_init_pci(bus, "virtio-console", - 6900, 0x1003, + PCI_VENDOR_ID_REDHAT_QUMRANET, + PCI_DEVICE_ID_VIRTIO_CONSOLE, 0, VIRTIO_ID_CONSOLE, 0x03, 0x80, 0x00, 0, sizeof(VirtIOConsole)); -- 1.6.0.6 ^ permalink raw reply related [flat|nested] 5+ messages in thread
* [Qemu-devel] [PATCH 3/3] Use the default subsystem vendor ID for virtio devices 2009-01-16 11:12 ` [Qemu-devel] [PATCH 2/3] Add macro for virtio-console PCI device ID Mark McLoughlin @ 2009-01-16 11:12 ` Mark McLoughlin 2009-01-16 11:56 ` [Qemu-devel] [PATCH 2/3] Add macro for virtio-console PCI device ID Gerd Hoffmann [not found] ` <1232977378.3724.85.camel@blaa> 2 siblings, 0 replies; 5+ messages in thread From: Mark McLoughlin @ 2009-01-16 11:12 UTC (permalink / raw) To: Anthony Liguori; +Cc: Mark McLoughlin, qemu-devel A subsystem vendor ID of zero isn't allowed, so we use our default ID. Gerd points out that although the PCI subsystem vendor ID is treated by the guest as the virtio vendor ID: /* we use the subsystem vendor/device id as the virtio vendor/device * id. this allows us to use the same PCI vendor/device id for all * virtio devices and to identify the particular virtio driver by * the subsytem ids */ vp_dev->vdev.id.vendor = pci_dev->subsystem_vendor; vp_dev->vdev.id.device = pci_dev->subsystem_device; it looks like only the device ID is used right now: # grep virtio modules.alias alias virtio:d00000001v* virtio_net alias virtio:d00000002v* virtio_blk alias virtio:d00000003v* virtio_console alias virtio:d00000004v* virtio-rng alias virtio:d00000005v* virtio_balloon alias pci:v00001AF4d*sv*sd*bc*sc*i* virtio_pci alias virtio:d00000009v* 9pnet_virtio so setting the subsystem vendor id to something != zero shouldn't cause trouble. Signed-off-by: Mark McLoughlin <markmc@redhat.com> --- hw/virtio-balloon.c | 3 ++- hw/virtio-blk.c | 3 ++- hw/virtio-console.c | 3 ++- hw/virtio-net.c | 3 ++- 4 files changed, 8 insertions(+), 4 deletions(-) diff --git a/hw/virtio-balloon.c b/hw/virtio-balloon.c index 0765516..696a108 100644 --- a/hw/virtio-balloon.c +++ b/hw/virtio-balloon.c @@ -174,7 +174,8 @@ void *virtio_balloon_init(PCIBus *bus) s = (VirtIOBalloon *)virtio_init_pci(bus, "virtio-balloon", PCI_VENDOR_ID_REDHAT_QUMRANET, PCI_DEVICE_ID_VIRTIO_BALLOON, - 0, VIRTIO_ID_BALLOON, + PCI_VENDOR_ID_REDHAT_QUMRANET, + VIRTIO_ID_BALLOON, 0x05, 0x00, 0x00, 8, sizeof(VirtIOBalloon)); if (s == NULL) diff --git a/hw/virtio-blk.c b/hw/virtio-blk.c index e654cc5..847e221 100644 --- a/hw/virtio-blk.c +++ b/hw/virtio-blk.c @@ -227,7 +227,8 @@ void *virtio_blk_init(PCIBus *bus, BlockDriverState *bs) s = (VirtIOBlock *)virtio_init_pci(bus, "virtio-blk", PCI_VENDOR_ID_REDHAT_QUMRANET, PCI_DEVICE_ID_VIRTIO_BLOCK, - 0, VIRTIO_ID_BLOCK, + PCI_VENDOR_ID_REDHAT_QUMRANET, + VIRTIO_ID_BLOCK, 0x01, 0x80, 0x00, sizeof(struct virtio_blk_config), sizeof(VirtIOBlock)); if (!s) diff --git a/hw/virtio-console.c b/hw/virtio-console.c index ce20c91..333ffb1 100644 --- a/hw/virtio-console.c +++ b/hw/virtio-console.c @@ -128,7 +128,8 @@ void *virtio_console_init(PCIBus *bus, CharDriverState *chr) s = (VirtIOConsole *)virtio_init_pci(bus, "virtio-console", PCI_VENDOR_ID_REDHAT_QUMRANET, PCI_DEVICE_ID_VIRTIO_CONSOLE, - 0, VIRTIO_ID_CONSOLE, + PCI_VENDOR_ID_REDHAT_QUMRANET, + VIRTIO_ID_CONSOLE, 0x03, 0x80, 0x00, 0, sizeof(VirtIOConsole)); if (s == NULL) diff --git a/hw/virtio-net.c b/hw/virtio-net.c index b13914a..28f9280 100644 --- a/hw/virtio-net.c +++ b/hw/virtio-net.c @@ -323,7 +323,8 @@ void virtio_net_init(PCIBus *bus, NICInfo *nd, int devfn) n = (VirtIONet *)virtio_init_pci(bus, "virtio-net", PCI_VENDOR_ID_REDHAT_QUMRANET, PCI_DEVICE_ID_VIRTIO_NET, - 0, VIRTIO_ID_NET, + PCI_VENDOR_ID_REDHAT_QUMRANET, + VIRTIO_ID_NET, 0x02, 0x00, 0x00, sizeof(struct virtio_net_config), sizeof(VirtIONet)); -- 1.6.0.6 ^ permalink raw reply related [flat|nested] 5+ messages in thread
* Re: [Qemu-devel] [PATCH 2/3] Add macro for virtio-console PCI device ID 2009-01-16 11:12 ` [Qemu-devel] [PATCH 2/3] Add macro for virtio-console PCI device ID Mark McLoughlin 2009-01-16 11:12 ` [Qemu-devel] [PATCH 3/3] Use the default subsystem vendor ID for virtio devices Mark McLoughlin @ 2009-01-16 11:56 ` Gerd Hoffmann [not found] ` <1232977378.3724.85.camel@blaa> 2 siblings, 0 replies; 5+ messages in thread From: Gerd Hoffmann @ 2009-01-16 11:56 UTC (permalink / raw) To: qemu-devel; +Cc: Mark McLoughlin > +#define PCI_DEVICE_ID_VIRTIO_CONSOLE 0x1003 pci-ids.txt needs an update too (as vmchannel goes another route now reassigning 1af4:1003 to the console is fine). cheers, Gerd ^ permalink raw reply [flat|nested] 5+ messages in thread
[parent not found: <1232977378.3724.85.camel@blaa>]
* [Qemu-devel] Re: [PATCH 3/3][RESEND] Use the default subsystem vendor ID for virtio devices [not found] ` <1232977378.3724.85.camel@blaa> @ 2009-01-26 15:17 ` Anthony Liguori 0 siblings, 0 replies; 5+ messages in thread From: Anthony Liguori @ 2009-01-26 15:17 UTC (permalink / raw) To: Mark McLoughlin; +Cc: qemu-devel Mark McLoughlin wrote: > A subsystem vendor ID of zero isn't allowed, so we use our > default ID. > > Gerd points out that although the PCI subsystem vendor ID is > treated by the guest as the virtio vendor ID: > The thinking was to allow the subsystem vendor ID to be a virtio specific vendor ID. If it's required to be a PCI vendor ID, then I guess that's what we'll have to do. Regards, Anthony Liguori > /* we use the subsystem vendor/device id as the virtio vendor/device > * id. this allows us to use the same PCI vendor/device id for all > * virtio devices and to identify the particular virtio driver by > * the subsytem ids */ > vp_dev->vdev.id.vendor = pci_dev->subsystem_vendor; > vp_dev->vdev.id.device = pci_dev->subsystem_device; > > it looks like only the device ID is used right now: > > # grep virtio modules.alias > alias virtio:d00000001v* virtio_net > alias virtio:d00000002v* virtio_blk > alias virtio:d00000003v* virtio_console > alias virtio:d00000004v* virtio-rng > alias virtio:d00000005v* virtio_balloon > alias pci:v00001AF4d*sv*sd*bc*sc*i* virtio_pci > alias virtio:d00000009v* 9pnet_virtio > > so setting the subsystem vendor id to something != zero shouldn't cause > trouble. > > Signed-off-by: Mark McLoughlin <markmc@redhat.com> > --- > hw/virtio-balloon.c | 3 ++- > hw/virtio-blk.c | 3 ++- > hw/virtio-console.c | 3 ++- > hw/virtio-net.c | 3 ++- > 4 files changed, 8 insertions(+), 4 deletions(-) > > diff --git a/hw/virtio-balloon.c b/hw/virtio-balloon.c > index 0765516..696a108 100644 > --- a/hw/virtio-balloon.c > +++ b/hw/virtio-balloon.c > @@ -174,7 +174,8 @@ void *virtio_balloon_init(PCIBus *bus) > s = (VirtIOBalloon *)virtio_init_pci(bus, "virtio-balloon", > PCI_VENDOR_ID_REDHAT_QUMRANET, > PCI_DEVICE_ID_VIRTIO_BALLOON, > - 0, VIRTIO_ID_BALLOON, > + PCI_VENDOR_ID_REDHAT_QUMRANET, > + VIRTIO_ID_BALLOON, > 0x05, 0x00, 0x00, > 8, sizeof(VirtIOBalloon)); > if (s == NULL) > diff --git a/hw/virtio-blk.c b/hw/virtio-blk.c > index e654cc5..847e221 100644 > --- a/hw/virtio-blk.c > +++ b/hw/virtio-blk.c > @@ -227,7 +227,8 @@ void *virtio_blk_init(PCIBus *bus, BlockDriverState *bs) > s = (VirtIOBlock *)virtio_init_pci(bus, "virtio-blk", > PCI_VENDOR_ID_REDHAT_QUMRANET, > PCI_DEVICE_ID_VIRTIO_BLOCK, > - 0, VIRTIO_ID_BLOCK, > + PCI_VENDOR_ID_REDHAT_QUMRANET, > + VIRTIO_ID_BLOCK, > 0x01, 0x80, 0x00, > sizeof(struct virtio_blk_config), sizeof(VirtIOBlock)); > if (!s) > diff --git a/hw/virtio-console.c b/hw/virtio-console.c > index ce20c91..333ffb1 100644 > --- a/hw/virtio-console.c > +++ b/hw/virtio-console.c > @@ -128,7 +128,8 @@ void *virtio_console_init(PCIBus *bus, CharDriverState *chr) > s = (VirtIOConsole *)virtio_init_pci(bus, "virtio-console", > PCI_VENDOR_ID_REDHAT_QUMRANET, > PCI_DEVICE_ID_VIRTIO_CONSOLE, > - 0, VIRTIO_ID_CONSOLE, > + PCI_VENDOR_ID_REDHAT_QUMRANET, > + VIRTIO_ID_CONSOLE, > 0x03, 0x80, 0x00, > 0, sizeof(VirtIOConsole)); > if (s == NULL) > diff --git a/hw/virtio-net.c b/hw/virtio-net.c > index b13914a..28f9280 100644 > --- a/hw/virtio-net.c > +++ b/hw/virtio-net.c > @@ -323,7 +323,8 @@ void virtio_net_init(PCIBus *bus, NICInfo *nd, int devfn) > n = (VirtIONet *)virtio_init_pci(bus, "virtio-net", > PCI_VENDOR_ID_REDHAT_QUMRANET, > PCI_DEVICE_ID_VIRTIO_NET, > - 0, VIRTIO_ID_NET, > + PCI_VENDOR_ID_REDHAT_QUMRANET, > + VIRTIO_ID_NET, > 0x02, 0x00, 0x00, > sizeof(struct virtio_net_config), > sizeof(VirtIONet)); > ^ permalink raw reply [flat|nested] 5+ messages in thread
end of thread, other threads:[~2009-01-26 17:53 UTC | newest]
Thread overview: 5+ messages (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
2009-01-16 11:12 [Qemu-devel] [PATCH 1/3] Use macros for virtio-net PCI vendor/device IDs Mark McLoughlin
2009-01-16 11:12 ` [Qemu-devel] [PATCH 2/3] Add macro for virtio-console PCI device ID Mark McLoughlin
2009-01-16 11:12 ` [Qemu-devel] [PATCH 3/3] Use the default subsystem vendor ID for virtio devices Mark McLoughlin
2009-01-16 11:56 ` [Qemu-devel] [PATCH 2/3] Add macro for virtio-console PCI device ID Gerd Hoffmann
[not found] ` <1232977378.3724.85.camel@blaa>
2009-01-26 15:17 ` [Qemu-devel] Re: [PATCH 3/3][RESEND] Use the default subsystem vendor ID for virtio devices Anthony Liguori
This is an external index of several public inboxes, see mirroring instructions on how to clone and mirror all data and code used by this external index.