* [Linux 2.6.29_rc2] Undefined symbols when CONFIG_MFD_PCF50633 is enabled
@ 2009-01-17 10:56 Ozan Çağlayan
0 siblings, 0 replies; only message in thread
From: Ozan Çağlayan @ 2009-01-17 10:56 UTC (permalink / raw)
To: linux-kernel
I just enabled the following new config parameters:
++CONFIG_INPUT_PCF50633_PMU=m
++CONFIG_CHARGER_PCF50633=m
++CONFIG_MFD_PCF50633=m
++CONFIG_PCF50633_ADC=m
++CONFIG_PCF50633_GPIO=m
++CONFIG_REGULATOR_PCF50633=m
++CONFIG_RTC_DRV_PCF50633=m
and then the build/installation failed with the following symbol errors:
..
..
OBJCOPY arch/x86/boot/vmlinux.bin
AS arch/x86/boot/header.o
LD arch/x86/boot/setup.elf
OBJCOPY arch/x86/boot/setup.bin
BUILD arch/x86/boot/bzImage
Root device is (104, 1)
Setup is 12716 bytes (padded to 12800 bytes).
System is 2092 kB
CRC b335d63f
Kernel: arch/x86/boot/bzImage is ready (#1)
ERROR: "__set_irq_handler" [drivers/mfd/pcf50633-core.ko] undefined!
ERROR: "handle_level_irq" [drivers/mfd/pcf50633-core.ko] undefined!
make[1]: *** [__modpost] Error 1
--
Ozan Çağlayan
<ozan_at_pardus.org.tr>
^ permalink raw reply [flat|nested] only message in thread
only message in thread, other threads:[~2009-01-17 10:58 UTC | newest]
Thread overview: (only message) (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
2009-01-17 10:56 [Linux 2.6.29_rc2] Undefined symbols when CONFIG_MFD_PCF50633 is enabled Ozan Çağlayan
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.