All of lore.kernel.org
 help / color / mirror / Atom feed
From: Sergei Shtylyov <sshtylyov@ru.mvista.com>
To: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
Cc: David Brownell <david-b@pacbell.net>,
	linux-ide@vger.kernel.org,
	Kevin Hilman <khilman@deeprootsystems.com>
Subject: Re: [patch 2.6.29-rc2] palm_bk3710 buildfix
Date: Mon, 19 Jan 2009 16:03:06 +0300	[thread overview]
Message-ID: <49747A0A.2000305@ru.mvista.com> (raw)
In-Reply-To: <200901191300.48836.bzolnier@gmail.com>

Hello.

Bartlomiej Zolnierkiewicz wrote:

>>>  CC      drivers/ide/palm_bk3710.o
>>>drivers/ide/palm_bk3710.c: In function 'palm_bk3710_probe':
>>>drivers/ide/palm_bk3710.c:382: warning: assignment makes integer from pointer without a cast

>>>Someone should fix hw_regs_t to neither be a typedef, nor
>>>use "unsigned long" where it should use "void __iomem *".

>>    It cannot use pointers of course -- as the addresses can be I/O ports.

>>>Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>

>>>--- a/drivers/ide/palm_bk3710.c
>>>+++ b/drivers/ide/palm_bk3710.c
>>>@@ -346,7 +346,8 @@ static int __init palm_bk3710_probe(stru
>>> {
>>> 	struct clk *clk;
>>> 	struct resource *mem, *irq;
>>>-	unsigned long base, rate;
>>>+	void __iomem *base;
>>>+	unsigned long rate;
>>> 	int i, rc;
>>> 	hw_regs_t hw, *hws[] = { &hw, NULL, NULL, NULL };
>>> 
>>>@@ -382,11 +383,13 @@ static int __init palm_bk3710_probe(stru
>>> 	base = IO_ADDRESS(mem->start);
>>> 
>>> 	/* Configure the Palm Chip controller */
>>>-	palm_bk3710_chipinit((void __iomem *)base);
>>>+	palm_bk3710_chipinit(base);
>>> 
>>> 	for (i = 0; i < IDE_NR_PORTS - 2; i++)
>>>-		hw.io_ports_array[i] = base + IDE_PALM_ATA_PRI_REG_OFFSET + i;
>>>-	hw.io_ports.ctl_addr = base + IDE_PALM_ATA_PRI_CTL_OFFSET;
>>>+		hw.io_ports_array[i] = (unsigned long)
>>>+				(base + IDE_PALM_ATA_PRI_REG_OFFSET + i);
>>>+	hw.io_ports.ctl_addr = (unsigned long)
>>>+			(base + IDE_PALM_ATA_PRI_CTL_OFFSET);

>>    Ugh. I suggest adding another variable...

>>--- a/drivers/ide/palm_bk3710.c
>>+++ b/drivers/ide/palm_bk3710.c
>>@@ -346,7 +346,8 @@ static int __init palm_bk3710_probe(stru
>>  {
>>  	struct clk *clk;
>>  	struct resource *mem, *irq;
>>  	unsigned long base, rate;
>>+	void __iomem *regs;
>>  	int i, rc;
>>  	hw_regs_t hw, *hws[] = { &hw, NULL, NULL, NULL };
>>
>>@@ -379,11 +380,11 @@ static int __init palm_bk3710_probe(stru
>>  		return -EBUSY;
>>  	}
>>
>>- 	base = IO_ADDRESS(mem->start);
>>+ 	regs = IO_ADDRESS(mem->start);
>>
>>  	/* Configure the Palm Chip controller */
>>-	palm_bk3710_chipinit((void __iomem *)base);
>>+	palm_bk3710_chipinit(regs);
>>
>>+	base = (unsigned long)regs;
>>  	for (i = 0; i < IDE_NR_PORTS - 2; i++)
>>  		hw.io_ports_array[i] = base + IDE_PALM_ATA_PRI_REG_OFFSET + i;
>>  	hw.io_ports.ctl_addr = base + IDE_PALM_ATA_PRI_CTL_OFFSET;

> I applied original patch since having one additional cast has overally lower
> complexity than having an additional variable...

    Grr... as if the stack use aren't optimized by gcc based on the variable 
lifetimes. I can recast the patch myself BTW.

MBR, Sergei

  reply	other threads:[~2009-01-19 13:02 UTC|newest]

Thread overview: 11+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2009-01-18 16:33 [patch 2.6.29-rc2] palm_bk3710 buildfix David Brownell
2009-01-18 17:14 ` Sergei Shtylyov
2009-01-19  0:29   ` David Brownell
2009-01-19  8:35     ` Sergei Shtylyov
2009-01-19  8:57       ` Sergei Shtylyov
2009-01-19 12:07         ` Bartlomiej Zolnierkiewicz
2009-01-19 13:06           ` Sergei Shtylyov
2009-01-19 14:14             ` Sergei Shtylyov
2009-01-19 12:00   ` Bartlomiej Zolnierkiewicz
2009-01-19 13:03     ` Sergei Shtylyov [this message]
2009-01-19 13:21       ` Bartlomiej Zolnierkiewicz

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=49747A0A.2000305@ru.mvista.com \
    --to=sshtylyov@ru.mvista.com \
    --cc=bzolnier@gmail.com \
    --cc=david-b@pacbell.net \
    --cc=khilman@deeprootsystems.com \
    --cc=linux-ide@vger.kernel.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.