From: "Lu, Ran" <hephooey@gmail.com>
To: Intel Graphics Development <intel-gfx@lists.freedesktop.org>
Subject: Re: Help to enable Iris Pro on Retina MBP 11.3
Date: Wed, 08 Jan 2014 08:53:08 -0600 [thread overview]
Message-ID: <4981713.dJOCYugK6C@rmbp> (raw)
In-Reply-To: <CAPM=9ty+ZJArhaDqAS0Q0tJ95rGWQ-S59LgnY3pwLAumpH5KTQ@mail.gmail.com>
[-- Attachment #1: Type: text/plain, Size: 2409 bytes --]
Hi,
On Wednesday 08 January 2014 19:18:03, Dave Airlie wrote：
> On Wed, Jan 8, 2014 at 7:12 PM, Jani Nikula <jani.nikula@linux.intel.com>
wrote:
> > On Tue, 07 Jan 2014, "Lu, Ran" <hephooey@gmail.com> wrote:
> >> Hi Jani,
> >>
> >> As a matter of fact, I tried kernel from 3.9 to 3.13-rc6, all of them
> >> cannot read the pci information from 0:2.0, and lspci do not have Iris
> >> Pro as a video controller. I put in the attachment dmesg output from
> >> 3.12.6, I added some printk to show the results from
> >> pci_bus_read_dev_vendor_id, otherwise it is a vanilla kernel. I do not
> >> think I get any extra information by adding drm.debug=0xe because the
> >> pci device is never registered properly, but it was there anyway.The
> >> weird thing is grub can read pci device fine, I took a picture since I
> >> do not know how to save outputs in grub console. I did some test with
> >> another laptop with a working HD 4600. It seems even if I use setpci -s
> >> 0:2.0 4.b=0 to disable the device, it is still responsive to further
> >> setpci and I can bring it back by setting 4.b=7. Now it does not look
> >> like the video card is disable. I guess maybe something wrong in the
> >> ACPI table triggered the kernel to read the wrong place. But still
> >> strange it only missed that particular bus. In case you are interested,
> >> I also put the dsdt table in the attachment, I can provide other tables
> >> if they are important.
> >
> > I don't have much clues here. Are there any bios settings you could
> > tweak? Did you try without the nvidia driver loaded?
>
> The EFI disables it, at least as on the previous model.
>
> It was possible to install an ap under OSX set the intel gfx as the default,
> and reboot.
Thanks Dave and Jani, turns out there is a patch for grub [1] to fake a mac
system so the efi enables everything. I can use IGPU after grub was patched. It
seems I cannot use external monitor though, only the nouveau driver found
external monitor like DP-2, I heard it is because intel GPU are not wired
physically to the port (which is a bit weird since it is also a thunderbolt
port). Other than that everything is fine and the battery drain reduced about
30%. The new dmesg is in the attachment in case you are interested.
[1] http://lists.gnu.org/archive/html/grub-devel/2013-12/msg00442.html
--
Best Regards,
LR
[-- Attachment #2: dmesg.log --]
[-- Type: text/x-log, Size: 77775 bytes --]
[ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 4105620
[ 0.000000] Kernel command line: root=/dev/sda2 ro BOOT_IMAGE=/vmlinuz-3.13.0-rc7 root=/dev/sda2 ro libata.force=noncq drm.debug=0xe i915.modeset=1
[ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes)
[ 0.000000] Dentry cache hash table entries: 2097152 (order: 12, 16777216 bytes)
[ 0.000000] Inode-cache hash table entries: 1048576 (order: 11, 8388608 bytes)
[ 0.000000] xsave: enabled xstate_bv 0x7, cntxt size 0x340
[ 0.000000] Checking aperture...
[ 0.000000] No AGP bridge found
[ 0.000000] Memory: 16095688K/16683264K available (3822K kernel code, 487K rwdata, 1428K rodata, 836K init, 856K bss, 587576K reserved)
[ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=8, Nodes=1
[ 0.000000] Hierarchical RCU implementation.
[ 0.000000] CONFIG_RCU_FANOUT set to non-default value of 32
[ 0.000000] NR_IRQS:4352 nr_irqs:744 16
[ 0.000000] Console: colour dummy device 80x25
[ 0.000000] console [tty0] enabled
[ 0.000000] hpet clockevent registered
[ 0.000000] tsc: Fast TSC calibration using PIT
[ 0.001000] tsc: Detected 2294.932 MHz processor
[ 0.000001] Calibrating delay loop (skipped), value calculated using timer frequency.. 4589.86 BogoMIPS (lpj=2294932)
[ 0.000004] pid_max: default: 32768 minimum: 301
[ 0.000019] init_memory_mapping: [mem 0x7ae39000-0x7ae8efff]
[ 0.000020] [mem 0x7ae39000-0x7ae8efff] page 4k
[ 0.000026] init_memory_mapping: [mem 0x7aed0000-0x7aefefff]
[ 0.000027] [mem 0x7aed0000-0x7aefefff] page 4k
[ 0.000055] init_memory_mapping: [mem 0x7b000000-0x7f9fffff]
[ 0.000056] [mem 0x7b000000-0x7f9fffff] page 2M
[ 0.021300] Mount-cache hash table entries: 256
[ 0.021396] CPU: Physical Processor ID: 0
[ 0.021397] CPU: Processor Core ID: 0
[ 0.021400] ENERGY_PERF_BIAS: Set to 'normal', was 'performance'
ENERGY_PERF_BIAS: View and update with x86_energy_perf_policy(8)
[ 0.022158] mce: CPU supports 10 MCE banks
[ 0.022170] CPU0: Thermal monitoring enabled (TM1)
[ 0.022179] Last level iTLB entries: 4KB 0, 2MB 0, 4MB 0
Last level dTLB entries: 4KB 64, 2MB 0, 4MB 0
tlb_flushall_shift: 6
[ 0.022246] Freeing SMP alternatives memory: 16K (ffffffff8174c000 - ffffffff81750000)
[ 0.022248] ACPI: Core revision 20131115
[ 0.033639] ACPI: All ACPI Tables successfully acquired
[ 0.038335] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[ 0.048333] smpboot: CPU0: Intel(R) Core(TM) i7-4850HQ CPU @ 2.30GHz (fam: 06, model: 46, stepping: 01)
[ 0.048342] TSC deadline timer enabled
[ 0.048348] Performance Events: PEBS fmt2+, 16-deep LBR, Haswell events, full-width counters, Intel PMU driver.
[ 0.048353] ... version: 3
[ 0.048354] ... bit width: 48
[ 0.048355] ... generic registers: 4
[ 0.048356] ... value mask: 0000ffffffffffff
[ 0.048357] ... max period: 0000ffffffffffff
[ 0.048357] ... fixed-purpose events: 3
[ 0.048358] ... event mask: 000000070000000f
[ 0.048485] x86: Booting SMP configuration:
[ 0.048486] .... node #0, CPUs: #1 #2 #3 #4 #5 #6 #7
[ 0.172833] x86: Booted up 1 node, 8 CPUs
[ 0.172836] smpboot: Total of 8 processors activated (36718.91 BogoMIPS)
[ 0.249093] devtmpfs: initialized
[ 0.249180] PM: Registering ACPI NVS region [mem 0x7ad14000-0x7ad52fff] (258048 bytes)
[ 0.249309] NET: Registered protocol family 16
[ 0.249452] cpuidle: using governor menu
[ 0.249462] ACPI: bus type PCI registered
[ 0.249514] PCI: MMCONFIG for domain 0000 [bus 00-9c] at [mem 0xe0000000-0xe9cfffff] (base 0xe0000000)
[ 0.249516] PCI: not using MMCONFIG
[ 0.249517] PCI: Using configuration type 1 for base access
[ 0.251140] bio: create slab <bio-0> at 0
[ 0.251258] ACPI: Added _OSI(Module Device)
[ 0.251260] ACPI: Added _OSI(Processor Device)
[ 0.251261] ACPI: Added _OSI(3.0 _SCP Extensions)
[ 0.251262] ACPI: Added _OSI(Processor Aggregator Device)
[ 0.253570] ACPI : EC: EC description table is found, configuring boot EC
[ 0.259296] [Firmware Bug]: ACPI: BIOS _OSI(Linux) query ignored
[ 2.268627] ACPI: SSDT 000000007af7d890 0004F0 (v01 PmRef Cpu0Cst 00003001 INTL 20100915)
[ 2.269239] ACPI: Dynamic OEM Table Load:
[ 2.269241] ACPI: SSDT (null) 0004F0 (v01 PmRef Cpu0Cst 00003001 INTL 20100915)
[ 2.273735] ACPI: SSDT 000000007af7e190 00067C (v01 PmRef ApIst 00003000 INTL 20100915)
[ 2.274413] ACPI: Dynamic OEM Table Load:
[ 2.274414] ACPI: SSDT (null) 00067C (v01 PmRef ApIst 00003000 INTL 20100915)
[ 2.278624] ACPI: SSDT 000000007af7cd90 000119 (v01 PmRef ApCst 00003000 INTL 20100915)
[ 2.279229] ACPI: Dynamic OEM Table Load:
[ 2.279231] ACPI: SSDT (null) 000119 (v01 PmRef ApCst 00003000 INTL 20100915)
[ 2.284466] ACPI: Interpreter enabled
[ 2.284472] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S1_] (20131115/hwxface-580)
[ 2.284478] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S2_] (20131115/hwxface-580)
[ 2.284487] ACPI: (supports S0 S3 S5)
[ 2.284488] ACPI: Using IOAPIC for interrupt routing
[ 2.284502] PCI: MMCONFIG for domain 0000 [bus 00-9c] at [mem 0xe0000000-0xe9cfffff] (base 0xe0000000)
[ 2.284917] PCI: MMCONFIG at [mem 0xe0000000-0xe9cfffff] reserved in ACPI motherboard resources
[ 2.298978] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
[ 2.299105] ACPI: No dock devices found.
[ 2.309682] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
[ 2.309687] acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI]
[ 2.309806] acpi PNP0A08:00: _OSC: OS now controls [PCIeHotplug PME PCIeCapability]
[ 2.309958] acpi PNP0A08:00: [Firmware Info]: MMCONFIG for domain 0000 [bus 00-9c] only partially covers this bridge
[ 2.309989] PCI host bridge to bus 0000:00
[ 2.309991] pci_bus 0000:00: root bus resource [bus 00-ff]
[ 2.309993] pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7]
[ 2.309995] pci_bus 0000:00: root bus resource [io 0x0d00-0xffff]
[ 2.309996] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff]
[ 2.309998] pci_bus 0000:00: root bus resource [mem 0x000c0000-0x000c3fff]
[ 2.310000] pci_bus 0000:00: root bus resource [mem 0x000c4000-0x000c7fff]
[ 2.310001] pci_bus 0000:00: root bus resource [mem 0x000c8000-0x000cbfff]
[ 2.310003] pci_bus 0000:00: root bus resource [mem 0x000cc000-0x000cffff]
[ 2.310005] pci_bus 0000:00: root bus resource [mem 0x000d0000-0x000d3fff]
[ 2.310006] pci_bus 0000:00: root bus resource [mem 0x000d4000-0x000d7fff]
[ 2.310008] pci_bus 0000:00: root bus resource [mem 0x000d8000-0x000dbfff]
[ 2.310010] pci_bus 0000:00: root bus resource [mem 0x000dc000-0x000dffff]
[ 2.310011] pci_bus 0000:00: root bus resource [mem 0x000e0000-0x000e3fff]
[ 2.310013] pci_bus 0000:00: root bus resource [mem 0x000e4000-0x000e7fff]
[ 2.310015] pci_bus 0000:00: root bus resource [mem 0x000e8000-0x000ebfff]
[ 2.310016] pci_bus 0000:00: root bus resource [mem 0x000ec000-0x000effff]
[ 2.310018] pci_bus 0000:00: root bus resource [mem 0x000f0000-0x000fffff]
[ 2.310020] pci_bus 0000:00: root bus resource [mem 0x7fa00000-0xfeafffff]
[ 2.310021] pci_bus 0000:00: root bus resource [mem 0xfed40000-0xfed44fff]
[ 2.310023] pci_bus 0000:00: scanning bus
[ 2.310030] pci 0000:00:00.0: [8086:0d04] type 00 class 0x060000
[ 2.310042] pci 0000:00:00.0: calling quirk_mmio_always_on+0x0/0x10
[ 2.310114] pci 0000:00:01.0: [8086:0d01] type 01 class 0x060400
[ 2.310132] pci 0000:00:01.0: calling pci_fixup_transparent_bridge+0x0/0x20
[ 2.310149] pci 0000:00:01.0: PME# supported from D0 D3hot D3cold
[ 2.310151] pci 0000:00:01.0: PME# disabled
[ 2.310178] pci 0000:00:01.0: System wakeup disabled by ACPI
[ 2.310213] pci 0000:00:01.1: [8086:0d05] type 01 class 0x060400
[ 2.310227] pci 0000:00:01.1: calling pci_fixup_transparent_bridge+0x0/0x20
[ 2.310244] pci 0000:00:01.1: PME# supported from D0 D3hot D3cold
[ 2.310246] pci 0000:00:01.1: PME# disabled
[ 2.310271] pci 0000:00:01.1: System wakeup disabled by ACPI
[ 2.310321] pci 0000:00:02.0: [8086:0d26] type 00 class 0x030000
[ 2.310331] pci 0000:00:02.0: reg 0x10: [mem 0xc1400000-0xc17fffff 64bit]
[ 2.310336] pci 0000:00:02.0: reg 0x18: [mem 0xb0000000-0xbfffffff 64bit pref]
[ 2.310339] pci 0000:00:02.0: reg 0x20: [io 0x2000-0x203f]
[ 2.310398] pci 0000:00:03.0: [8086:0d0c] type 00 class 0x040300
[ 2.310404] pci 0000:00:03.0: reg 0x10: [mem 0xc1e10000-0xc1e13fff 64bit]
[ 2.310488] pci 0000:00:14.0: [8086:8c31] type 00 class 0x0c0330
[ 2.310506] pci 0000:00:14.0: reg 0x10: [mem 0xc1e00000-0xc1e0ffff 64bit]
[ 2.310560] pci 0000:00:14.0: PME# supported from D3hot D3cold
[ 2.310563] pci 0000:00:14.0: PME# disabled
[ 2.310582] pci 0000:00:14.0: System wakeup disabled by ACPI
[ 2.310628] pci 0000:00:16.0: [8086:8c3a] type 00 class 0x078000
[ 2.310647] pci 0000:00:16.0: reg 0x10: [mem 0xc1e19100-0xc1e1910f 64bit]
[ 2.310704] pci 0000:00:16.0: PME# supported from D0 D3hot D3cold
[ 2.310707] pci 0000:00:16.0: PME# disabled
[ 2.310772] pci 0000:00:1b.0: [8086:8c20] type 00 class 0x040300
[ 2.310786] pci 0000:00:1b.0: reg 0x10: [mem 0xc1e14000-0xc1e17fff 64bit]
[ 2.310844] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
[ 2.310847] pci 0000:00:1b.0: PME# disabled
[ 2.310868] pci 0000:00:1b.0: System wakeup disabled by ACPI
[ 2.310907] pci 0000:00:1c.0: [8086:8c10] type 01 class 0x060400
[ 2.310933] pci 0000:00:1c.0: calling pci_fixup_transparent_bridge+0x0/0x20
[ 2.310967] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
[ 2.310971] pci 0000:00:1c.0: PME# disabled
[ 2.311032] pci 0000:00:1c.2: [8086:8c14] type 01 class 0x060400
[ 2.311064] pci 0000:00:1c.2: calling pci_fixup_transparent_bridge+0x0/0x20
[ 2.311099] pci 0000:00:1c.2: PME# supported from D0 D3hot D3cold
[ 2.311102] pci 0000:00:1c.2: PME# disabled
[ 2.311125] pci 0000:00:1c.2: System wakeup disabled by ACPI
[ 2.311163] pci 0000:00:1c.3: [8086:8c16] type 01 class 0x060400
[ 2.311194] pci 0000:00:1c.3: calling pci_fixup_transparent_bridge+0x0/0x20
[ 2.311229] pci 0000:00:1c.3: PME# supported from D0 D3hot D3cold
[ 2.311232] pci 0000:00:1c.3: PME# disabled
[ 2.311255] pci 0000:00:1c.3: System wakeup disabled by ACPI
[ 2.311293] pci 0000:00:1c.4: [8086:8c18] type 01 class 0x060400
[ 2.311338] pci 0000:00:1c.4: calling pci_fixup_transparent_bridge+0x0/0x20
[ 2.311372] pci 0000:00:1c.4: PME# supported from D0 D3hot D3cold
[ 2.311375] pci 0000:00:1c.4: PME# disabled
[ 2.311397] pci 0000:00:1c.4: System wakeup disabled by ACPI
[ 2.311436] pci 0000:00:1f.0: [8086:8c4b] type 00 class 0x060100
[ 2.311571] pci 0000:00:1f.3: [8086:8c22] type 00 class 0x0c0500
[ 2.311582] pci 0000:00:1f.3: reg 0x10: [mem 0xc1e19000-0xc1e190ff 64bit]
[ 2.311596] pci 0000:00:1f.3: reg 0x20: [io 0xefa0-0xefbf]
[ 2.311651] pci_bus 0000:00: fixups for bus
[ 2.311653] pci 0000:00:01.0: scanning [bus 01-01] behind bridge, pass 0
[ 2.311681] pci_bus 0000:01: scanning bus
[ 2.311701] pci 0000:01:00.0: [10de:0fe9] type 00 class 0x030000
[ 2.311711] pci 0000:01:00.0: reg 0x10: [mem 0xc0000000-0xc0ffffff]
[ 2.311722] pci 0000:01:00.0: reg 0x14: [mem 0x80000000-0x8fffffff 64bit pref]
[ 2.311732] pci 0000:01:00.0: reg 0x1c: [mem 0x90000000-0x91ffffff 64bit pref]
[ 2.311739] pci 0000:01:00.0: reg 0x24: [io 0x1000-0x107f]
[ 2.311746] pci 0000:01:00.0: reg 0x30: [mem 0xc1000000-0xc107ffff pref]
[ 2.311797] pci 0000:01:00.0: System wakeup disabled by ACPI
[ 2.311838] pci 0000:01:00.1: [10de:0e1b] type 00 class 0x040300
[ 2.311845] pci 0000:01:00.1: reg 0x10: [mem 0xc1080000-0xc1083fff]
[ 2.313618] pci_bus 0000:01: fixups for bus
[ 2.313620] pci 0000:00:01.0: PCI bridge to [bus 01]
[ 2.313622] pci 0000:00:01.0: bridge window [io 0x1000-0x1fff]
[ 2.313624] pci 0000:00:01.0: bridge window [mem 0xc0000000-0xc10fffff]
[ 2.313627] pci 0000:00:01.0: bridge window [mem 0x80000000-0x91ffffff 64bit pref]
[ 2.313628] pci_bus 0000:01: bus scan returning with max=01
[ 2.313631] pci 0000:00:01.1: scanning [bus 06-9c] behind bridge, pass 0
[ 2.313666] pci_bus 0000:06: scanning bus
[ 2.313667] pci_bus 0000:06: fixups for bus
[ 2.313668] pci 0000:00:01.1: PCI bridge to [bus 06-9c]
[ 2.313670] pci 0000:00:01.1: bridge window [io 0x3000-0x5fff]
[ 2.313672] pci 0000:00:01.1: bridge window [mem 0xc1f00000-0xcdffffff]
[ 2.313675] pci 0000:00:01.1: bridge window [mem 0xce000000-0xd9ffffff 64bit pref]
[ 2.313676] pci_bus 0000:06: bus scan returning with max=06
[ 2.313685] pci 0000:00:1c.0: scanning [bus 02-02] behind bridge, pass 0
[ 2.313737] pci_bus 0000:02: scanning bus
[ 2.313745] pci_bus 0000:02: fixups for bus
[ 2.313746] pci 0000:00:1c.0: PCI bridge to [bus 02]
[ 2.313755] pci_bus 0000:02: bus scan returning with max=02
[ 2.313758] pci 0000:00:1c.2: scanning [bus 03-03] behind bridge, pass 0
[ 2.313809] pci_bus 0000:03: scanning bus
[ 2.313883] pci 0000:03:00.0: [14e4:43a0] type 00 class 0x028000
[ 2.313916] pci 0000:03:00.0: reg 0x10: [mem 0xc1a00000-0xc1a07fff 64bit]
[ 2.313945] pci 0000:03:00.0: reg 0x18: [mem 0xc1800000-0xc19fffff 64bit]
[ 2.314090] pci 0000:03:00.0: supports D1 D2
[ 2.314091] pci 0000:03:00.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 2.314098] pci 0000:03:00.0: PME# disabled
[ 2.314141] pci 0000:03:00.0: System wakeup disabled by ACPI
[ 2.315655] pci_bus 0000:03: fixups for bus
[ 2.315656] pci 0000:00:1c.2: PCI bridge to [bus 03]
[ 2.315661] pci 0000:00:1c.2: bridge window [mem 0xc1800000-0xc1afffff]
[ 2.315666] pci_bus 0000:03: bus scan returning with max=03
[ 2.315670] pci 0000:00:1c.3: scanning [bus 04-04] behind bridge, pass 0
[ 2.315722] pci_bus 0000:04: scanning bus
[ 2.315751] pci 0000:04:00.0: [14e4:1570] type 00 class 0x048000
[ 2.315771] pci 0000:04:00.0: reg 0x10: [mem 0xc1d00000-0xc1d0ffff 64bit]
[ 2.315788] pci 0000:04:00.0: reg 0x18: [mem 0xa0000000-0xafffffff 64bit pref]
[ 2.315804] pci 0000:04:00.0: reg 0x20: [mem 0xc1c00000-0xc1cfffff 64bit]
[ 2.315869] pci 0000:04:00.0: supports D1
[ 2.315870] pci 0000:04:00.0: PME# supported from D0 D3hot
[ 2.315874] pci 0000:04:00.0: PME# disabled
[ 2.317623] pci_bus 0000:04: fixups for bus
[ 2.317624] pci 0000:00:1c.3: PCI bridge to [bus 04]
[ 2.317629] pci 0000:00:1c.3: bridge window [mem 0xc1c00000-0xc1dfffff]
[ 2.317635] pci 0000:00:1c.3: bridge window [mem 0xa0000000-0xafffffff 64bit pref]
[ 2.317636] pci_bus 0000:04: bus scan returning with max=04
[ 2.317639] pci 0000:00:1c.4: scanning [bus 05-05] behind bridge, pass 0
[ 2.317691] pci_bus 0000:05: scanning bus
[ 2.317762] pci 0000:05:00.0: [144d:1600] type 00 class 0x010601
[ 2.317821] pci 0000:05:00.0: reg 0x24: [mem 0xc1b00000-0xc1b01fff]
[ 2.317833] pci 0000:05:00.0: reg 0x30: [mem 0xffff0000-0xffffffff pref]
[ 2.317886] pci 0000:05:00.0: PME# supported from D3hot D3cold
[ 2.317890] pci 0000:05:00.0: PME# disabled
[ 2.319624] pci_bus 0000:05: fixups for bus
[ 2.319626] pci 0000:00:1c.4: PCI bridge to [bus 05]
[ 2.319631] pci 0000:00:1c.4: bridge window [mem 0xc1b00000-0xc1bfffff]
[ 2.319636] pci_bus 0000:05: bus scan returning with max=05
[ 2.319639] pci 0000:00:01.0: scanning [bus 01-01] behind bridge, pass 1
[ 2.319642] pci 0000:00:01.1: scanning [bus 06-9c] behind bridge, pass 1
[ 2.319651] pci 0000:00:1c.0: scanning [bus 02-02] behind bridge, pass 1
[ 2.319656] pci 0000:00:1c.2: scanning [bus 03-03] behind bridge, pass 1
[ 2.319662] pci 0000:00:1c.3: scanning [bus 04-04] behind bridge, pass 1
[ 2.319667] pci 0000:00:1c.4: scanning [bus 05-05] behind bridge, pass 1
[ 2.319671] pci_bus 0000:00: bus scan returning with max=9c
[ 2.319735] pci_bus 0000:00: on NUMA node 0
[ 2.320983] ACPI: PCI Interrupt Link [LNKA] (IRQs 1 3 4 5 6 7 10 12 14 15) *0, disabled.
[ 2.321040] ACPI: PCI Interrupt Link [LNKB] (IRQs 1 3 4 5 6 7 11 12 14 15) *0, disabled.
[ 2.321088] ACPI: PCI Interrupt Link [LNKC] (IRQs 1 3 4 5 6 7 10 12 14 15) *0, disabled.
[ 2.321141] ACPI: PCI Interrupt Link [LNKD] (IRQs 1 3 4 5 6 7 11 12 14 15) *0, disabled.
[ 2.321187] ACPI: PCI Interrupt Link [LNKE] (IRQs 1 3 4 5 6 7 10 12 14 15) *0, disabled.
[ 2.321238] ACPI: PCI Interrupt Link [LNKF] (IRQs 1 3 4 5 6 7 11 12 14 15) *0, disabled.
[ 2.321285] ACPI: PCI Interrupt Link [LNKG] (IRQs 1 3 4 5 6 7 10 12 14 15) *0, disabled.
[ 2.321336] ACPI: PCI Interrupt Link [LNKH] (IRQs 1 3 4 5 6 7 11 12 14 15) *0, disabled.
[ 2.322621] ACPI: Enabled 2 GPEs in block 00 to 3F
[ 2.322628] ACPI: \_SB_.PCI0: notify handler is installed
[ 2.322690] Found 1 acpi root devices
[ 2.322712] ACPI : EC: GPE = 0x17, I/O: command/status = 0x66, data = 0x62
[ 2.322813] vgaarb: device added: PCI:0000:00:02.0,decodes=io+mem,owns=io+mem,locks=none
[ 2.322826] vgaarb: device added: PCI:0000:01:00.0,decodes=io+mem,owns=none,locks=none
[ 2.322828] vgaarb: loaded
[ 2.322829] vgaarb: bridge control possible 0000:01:00.0
[ 2.322830] vgaarb: no bridge control possible 0000:00:02.0
[ 2.322908] SCSI subsystem initialized
[ 2.322978] libata version 3.00 loaded.
[ 2.323063] PCI: Using ACPI for IRQ routing
[ 2.324455] PCI: pci_cache_line_size set to 64 bytes
[ 2.324472] pci 0000:01:00.0: BAR 0: reserving [mem 0xc0000000-0xc0ffffff flags 0x40200] (d=0, p=0)
[ 2.324474] pci 0000:01:00.0: BAR 1: reserving [mem 0x80000000-0x8fffffff flags 0x14220c] (d=0, p=0)
[ 2.324475] pci 0000:01:00.0: BAR 3: reserving [mem 0x90000000-0x91ffffff flags 0x14220c] (d=0, p=0)
[ 2.324479] pci 0000:00:02.0: BAR 0: reserving [mem 0xc1400000-0xc17fffff flags 0x140204] (d=0, p=0)
[ 2.324480] pci 0000:00:02.0: BAR 2: reserving [mem 0xb0000000-0xbfffffff flags 0x14220c] (d=0, p=0)
[ 2.324482] pci 0000:00:02.0: BAR 4: reserving [io 0x2000-0x203f flags 0x40101] (d=0, p=0)
[ 2.324484] pci 0000:00:03.0: BAR 0: reserving [mem 0xc1e10000-0xc1e13fff flags 0x140204] (d=0, p=0)
[ 2.324492] pci 0000:00:14.0: BAR 0: reserving [mem 0xc1e00000-0xc1e0ffff flags 0x140204] (d=0, p=0)
[ 2.324495] pci 0000:00:16.0: BAR 0: reserving [mem 0xc1e19100-0xc1e1910f flags 0x140204] (d=0, p=0)
[ 2.324497] pci 0000:00:1b.0: BAR 0: reserving [mem 0xc1e14000-0xc1e17fff flags 0x140204] (d=0, p=0)
[ 2.324546] pci 0000:03:00.0: BAR 0: reserving [mem 0xc1a00000-0xc1a07fff flags 0x140204] (d=0, p=0)
[ 2.324547] pci 0000:03:00.0: BAR 2: reserving [mem 0xc1800000-0xc19fffff flags 0x140204] (d=0, p=0)
[ 2.324558] pci 0000:04:00.0: BAR 0: reserving [mem 0xc1d00000-0xc1d0ffff flags 0x140204] (d=0, p=0)
[ 2.324559] pci 0000:04:00.0: BAR 2: reserving [mem 0xa0000000-0xafffffff flags 0x14220c] (d=0, p=0)
[ 2.324560] pci 0000:04:00.0: BAR 4: reserving [mem 0xc1c00000-0xc1cfffff flags 0x140204] (d=0, p=0)
[ 2.324567] pci 0000:05:00.0: BAR 5: reserving [mem 0xc1b00000-0xc1b01fff flags 0x40200] (d=0, p=0)
[ 2.324581] pci 0000:01:00.0: BAR 5: reserving [io 0x1000-0x107f flags 0x40101] (d=1, p=1)
[ 2.324583] pci 0000:01:00.1: BAR 0: reserving [mem 0xc1080000-0xc1083fff flags 0x40200] (d=1, p=1)
[ 2.324644] pci 0000:00:1f.3: BAR 0: reserving [mem 0xc1e19000-0xc1e190ff flags 0x140204] (d=1, p=1)
[ 2.324646] pci 0000:00:1f.3: BAR 4: reserving [io 0xefa0-0xefbf flags 0x40101] (d=1, p=1)
[ 2.324648] e820: reserve RAM buffer [mem 0x00058000-0x0005ffff]
[ 2.324649] e820: reserve RAM buffer [mem 0x0008f000-0x0008ffff]
[ 2.324649] e820: reserve RAM buffer [mem 0x7ad14000-0x7bffffff]
[ 2.324651] e820: reserve RAM buffer [mem 0x7ad60000-0x7bffffff]
[ 2.324652] e820: reserve RAM buffer [mem 0x7ae39000-0x7bffffff]
[ 2.324653] e820: reserve RAM buffer [mem 0x7aed0000-0x7bffffff]
[ 2.324654] e820: reserve RAM buffer [mem 0x7af7b000-0x7bffffff]
[ 2.324655] e820: reserve RAM buffer [mem 0x7b000000-0x7bffffff]
[ 2.324655] e820: reserve RAM buffer [mem 0x47f600000-0x47fffffff]
[ 2.324768] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0, 0, 0, 0, 0
[ 2.324772] hpet0: 8 comparators, 64-bit 14.318180 MHz counter
[ 2.327804] Switched to clocksource hpet
[ 2.328833] pnp: PnP ACPI init
[ 2.328838] ACPI: bus type PNP registered
[ 2.329164] pnp 00:00: [dma 4]
[ 2.329200] pnp 00:00: Plug and Play ACPI device, IDs PNP0200 (active)
[ 2.329236] pnp 00:01: Plug and Play ACPI device, IDs INT0800 (active)
[ 2.329336] system 00:02: [mem 0xfed00000-0xfed003ff] has been reserved
[ 2.329338] system 00:02: Plug and Play ACPI device, IDs PNP0103 PNP0c01 (active)
[ 2.329379] pnp 00:03: Plug and Play ACPI device, IDs PNP0c04 (active)
[ 2.329421] system 00:04: [io 0xffff] has been reserved
[ 2.329423] system 00:04: [io 0x0400-0x047f] could not be reserved
[ 2.329424] system 00:04: [io 0x0800-0x087f] has been reserved
[ 2.329426] system 00:04: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 2.329461] pnp 00:05: Plug and Play ACPI device, IDs PNP0b00 (active)
[ 2.329507] pnp 00:06: Plug and Play ACPI device, IDs APP0001 (active)
[ 2.329564] pnp 00:07: Plug and Play ACPI device, IDs APP000b (active)
[ 2.329663] system 00:08: [mem 0xfed1c000-0xfed1ffff] has been reserved
[ 2.329665] system 00:08: [mem 0xfed10000-0xfed17fff] has been reserved
[ 2.329666] system 00:08: [mem 0xfed18000-0xfed18fff] has been reserved
[ 2.329667] system 00:08: [mem 0xfed19000-0xfed19fff] has been reserved
[ 2.329669] system 00:08: [mem 0xe0000000-0xefffffff] could not be reserved
[ 2.329670] system 00:08: [mem 0xfed20000-0xfed3ffff] has been reserved
[ 2.329672] system 00:08: [mem 0xfed90000-0xfed93fff] has been reserved
[ 2.329673] system 00:08: [mem 0xfed45000-0xfed8ffff] has been reserved
[ 2.329674] system 00:08: [mem 0xff000000-0xffffffff] could not be reserved
[ 2.329676] system 00:08: [mem 0xfee00000-0xfeefffff] has been reserved
[ 2.329677] system 00:08: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 2.329726] system 00:09: [mem 0x20000000-0x201fffff] could not be reserved
[ 2.329728] system 00:09: [mem 0x40000000-0x401fffff] could not be reserved
[ 2.329729] system 00:09: Plug and Play ACPI device, IDs PNP0c01 (active)
[ 2.331482] pnp: PnP ACPI: found 10 devices
[ 2.331483] ACPI: bus type PNP unregistered
[ 2.339947] pci 0000:05:00.0: no compatible bridge window for [mem 0xffff0000-0xffffffff pref]
[ 2.339966] pci 0000:00:1c.0: bridge window [io 0x1000-0x0fff] to [bus 02] add_size 1000
[ 2.339968] pci 0000:00:1c.0: bridge window [mem 0x00100000-0x000fffff 64bit pref] to [bus 02] add_size 200000
[ 2.339969] pci 0000:00:1c.0: bridge window [mem 0x00100000-0x000fffff] to [bus 02] add_size 200000
[ 2.339992] pci 0000:00:1c.0: res[8]=[mem 0x00100000-0x000fffff] get_res_add_size add_size 200000
[ 2.339993] pci 0000:00:1c.0: res[9]=[mem 0x00100000-0x000fffff 64bit pref] get_res_add_size add_size 200000
[ 2.339994] pci 0000:00:1c.0: res[7]=[io 0x1000-0x0fff] get_res_add_size add_size 1000
[ 2.339997] pci 0000:00:1c.0: BAR 8: assigned [mem 0x7fa00000-0x7fbfffff]
[ 2.339999] pci 0000:00:1c.0: BAR 9: assigned [mem 0x7fc00000-0x7fdfffff 64bit pref]
[ 2.340002] pci 0000:00:1c.4: BAR 9: assigned [mem 0x7fe00000-0x7fefffff pref]
[ 2.340004] pci 0000:00:1c.0: BAR 7: assigned [io 0x6000-0x6fff]
[ 2.340005] pci 0000:00:01.0: PCI bridge to [bus 01]
[ 2.340007] pci 0000:00:01.0: bridge window [io 0x1000-0x1fff]
[ 2.340009] pci 0000:00:01.0: bridge window [mem 0xc0000000-0xc10fffff]
[ 2.340011] pci 0000:00:01.0: bridge window [mem 0x80000000-0x91ffffff 64bit pref]
[ 2.340014] pci 0000:00:01.1: PCI bridge to [bus 06-9c]
[ 2.340015] pci 0000:00:01.1: bridge window [io 0x3000-0x5fff]
[ 2.340018] pci 0000:00:01.1: bridge window [mem 0xc1f00000-0xcdffffff]
[ 2.340020] pci 0000:00:01.1: bridge window [mem 0xce000000-0xd9ffffff 64bit pref]
[ 2.340022] pci 0000:00:1c.0: PCI bridge to [bus 02]
[ 2.340029] pci 0000:00:1c.0: bridge window [io 0x6000-0x6fff]
[ 2.340033] pci 0000:00:1c.0: bridge window [mem 0x7fa00000-0x7fbfffff]
[ 2.340037] pci 0000:00:1c.0: bridge window [mem 0x7fc00000-0x7fdfffff 64bit pref]
[ 2.340042] pci 0000:00:1c.2: PCI bridge to [bus 03]
[ 2.340046] pci 0000:00:1c.2: bridge window [mem 0xc1800000-0xc1afffff]
[ 2.340053] pci 0000:00:1c.3: PCI bridge to [bus 04]
[ 2.340057] pci 0000:00:1c.3: bridge window [mem 0xc1c00000-0xc1dfffff]
[ 2.340061] pci 0000:00:1c.3: bridge window [mem 0xa0000000-0xafffffff 64bit pref]
[ 2.340066] pci 0000:05:00.0: BAR 6: assigned [mem 0x7fe00000-0x7fe0ffff pref]
[ 2.340068] pci 0000:00:1c.4: PCI bridge to [bus 05]
[ 2.340072] pci 0000:00:1c.4: bridge window [mem 0xc1b00000-0xc1bfffff]
[ 2.340076] pci 0000:00:1c.4: bridge window [mem 0x7fe00000-0x7fefffff pref]
[ 2.340081] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7]
[ 2.340082] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff]
[ 2.340083] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff]
[ 2.340084] pci_bus 0000:00: resource 7 [mem 0x000c0000-0x000c3fff]
[ 2.340084] pci_bus 0000:00: resource 8 [mem 0x000c4000-0x000c7fff]
[ 2.340085] pci_bus 0000:00: resource 9 [mem 0x000c8000-0x000cbfff]
[ 2.340086] pci_bus 0000:00: resource 10 [mem 0x000cc000-0x000cffff]
[ 2.340087] pci_bus 0000:00: resource 11 [mem 0x000d0000-0x000d3fff]
[ 2.340088] pci_bus 0000:00: resource 12 [mem 0x000d4000-0x000d7fff]
[ 2.340088] pci_bus 0000:00: resource 13 [mem 0x000d8000-0x000dbfff]
[ 2.340089] pci_bus 0000:00: resource 14 [mem 0x000dc000-0x000dffff]
[ 2.340090] pci_bus 0000:00: resource 15 [mem 0x000e0000-0x000e3fff]
[ 2.340090] pci_bus 0000:00: resource 16 [mem 0x000e4000-0x000e7fff]
[ 2.340091] pci_bus 0000:00: resource 17 [mem 0x000e8000-0x000ebfff]
[ 2.340092] pci_bus 0000:00: resource 18 [mem 0x000ec000-0x000effff]
[ 2.340092] pci_bus 0000:00: resource 19 [mem 0x000f0000-0x000fffff]
[ 2.340093] pci_bus 0000:00: resource 20 [mem 0x7fa00000-0xfeafffff]
[ 2.340094] pci_bus 0000:00: resource 21 [mem 0xfed40000-0xfed44fff]
[ 2.340095] pci_bus 0000:01: resource 0 [io 0x1000-0x1fff]
[ 2.340095] pci_bus 0000:01: resource 1 [mem 0xc0000000-0xc10fffff]
[ 2.340096] pci_bus 0000:01: resource 2 [mem 0x80000000-0x91ffffff 64bit pref]
[ 2.340097] pci_bus 0000:06: resource 0 [io 0x3000-0x5fff]
[ 2.340098] pci_bus 0000:06: resource 1 [mem 0xc1f00000-0xcdffffff]
[ 2.340098] pci_bus 0000:06: resource 2 [mem 0xce000000-0xd9ffffff 64bit pref]
[ 2.340099] pci_bus 0000:02: resource 0 [io 0x6000-0x6fff]
[ 2.340100] pci_bus 0000:02: resource 1 [mem 0x7fa00000-0x7fbfffff]
[ 2.340101] pci_bus 0000:02: resource 2 [mem 0x7fc00000-0x7fdfffff 64bit pref]
[ 2.340101] pci_bus 0000:03: resource 1 [mem 0xc1800000-0xc1afffff]
[ 2.340102] pci_bus 0000:04: resource 1 [mem 0xc1c00000-0xc1dfffff]
[ 2.340103] pci_bus 0000:04: resource 2 [mem 0xa0000000-0xafffffff 64bit pref]
[ 2.340104] pci_bus 0000:05: resource 1 [mem 0xc1b00000-0xc1bfffff]
[ 2.340104] pci_bus 0000:05: resource 2 [mem 0x7fe00000-0x7fefffff pref]
[ 2.340121] NET: Registered protocol family 2
[ 2.340188] TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
[ 2.340305] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
[ 2.340418] TCP: Hash tables configured (established 131072 bind 65536)
[ 2.340429] TCP: reno registered
[ 2.340431] UDP hash table entries: 8192 (order: 6, 262144 bytes)
[ 2.340468] UDP-Lite hash table entries: 8192 (order: 6, 262144 bytes)
[ 2.340528] pci 0000:00:02.0: calling pci_fixup_video+0x0/0xd0
[ 2.340529] pci 0000:00:02.0: Boot video device
[ 2.340533] pci 0000:00:14.0: calling quirk_remove_d3_delay+0x0/0x10
[ 2.340536] pci 0000:00:14.0: calling quirk_usb_early_handoff+0x0/0x690
[ 2.340668] pci 0000:00:16.0: calling quirk_remove_d3_delay+0x0/0x10
[ 2.340671] pci 0000:00:1b.0: calling quirk_remove_d3_delay+0x0/0x10
[ 2.340680] pci 0000:00:1c.4: calling quirk_remove_d3_delay+0x0/0x10
[ 2.340685] pci 0000:00:1f.3: calling quirk_remove_d3_delay+0x0/0x10
[ 2.340688] pci 0000:01:00.0: calling nv_msi_ht_cap_quirk_leaf+0x0/0x20
[ 2.340706] pci 0000:01:00.0: calling pci_fixup_video+0x0/0xd0
[ 2.340709] pci 0000:01:00.1: calling nv_msi_ht_cap_quirk_leaf+0x0/0x20
[ 2.340767] PCI: CLS 256 bytes, default 64
[ 2.340794] dmar: Host address width 39
[ 2.340795] dmar: DRHD base: 0x000000fed90000 flags: 0x0
[ 2.340815] dmar: IOMMU 0: reg_base_addr fed90000 ver 1:0 cap c0000020660462 ecap f0101a
[ 2.340816] dmar: DRHD base: 0x000000fed91000 flags: 0x1
[ 2.340821] dmar: IOMMU 1: reg_base_addr fed91000 ver 1:0 cap d2008020660462 ecap f010da
[ 2.340822] dmar: RMRR base: 0x0000007b800000 end: 0x0000007f9fffff
[ 2.340825] DMAR: No ATSR found
[ 2.340842] IOMMU 0 0xfed90000: using Queued invalidation
[ 2.340844] IOMMU 1 0xfed91000: using Queued invalidation
[ 2.340845] IOMMU: Setting RMRR:
[ 2.340854] IOMMU: Setting identity map for device 0000:00:02.0 [0x7b800000 - 0x7f9fffff]
[ 2.341170] IOMMU: Prepare 0-16MiB unity mapping for LPC
[ 2.341176] IOMMU: Setting identity map for device 0000:00:1f.0 [0x0 - 0xffffff]
[ 2.341358] PCI-DMA: Intel(R) Virtualization Technology for Directed I/O
[ 2.344387] audit: initializing netlink socket (disabled)
[ 2.344397] type=2000 audit(1389163804.249:1): initialized
[ 2.347694] msgmni has been set to 32005
[ 2.348206] alg: No test for stdrng (krng)
[ 2.348294] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253)
[ 2.348296] io scheduler noop registered
[ 2.348298] io scheduler deadline registered (default)
[ 2.348434] pcieport 0000:00:01.0: irq 42 for MSI/MSI-X
[ 2.348584] pcieport 0000:00:01.1: irq 43 for MSI/MSI-X
[ 2.348684] pcieport 0000:00:1c.0: enabling device (0000 -> 0003)
[ 2.348743] pcieport 0000:00:1c.0: enabling bus mastering
[ 2.348756] pcieport 0000:00:1c.0: irq 44 for MSI/MSI-X
[ 2.348941] pcieport 0000:00:1c.2: irq 45 for MSI/MSI-X
[ 2.349080] pcieport 0000:00:1c.3: irq 46 for MSI/MSI-X
[ 2.349219] pcieport 0000:00:1c.4: irq 47 for MSI/MSI-X
[ 2.349336] pcieport 0000:00:01.0: Signaling PME through PCIe PME interrupt
[ 2.349338] pci 0000:01:00.0: Signaling PME through PCIe PME interrupt
[ 2.349340] pci 0000:01:00.1: Signaling PME through PCIe PME interrupt
[ 2.349342] pcie_pme 0000:00:01.0:pcie01: service driver pcie_pme loaded
[ 2.349351] pcieport 0000:00:01.1: Signaling PME through PCIe PME interrupt
[ 2.349354] pcie_pme 0000:00:01.1:pcie01: service driver pcie_pme loaded
[ 2.349372] pcieport 0000:00:1c.0: Signaling PME through PCIe PME interrupt
[ 2.349381] pcie_pme 0000:00:1c.0:pcie01: service driver pcie_pme loaded
[ 2.349394] pcieport 0000:00:1c.2: Signaling PME through PCIe PME interrupt
[ 2.349395] pci 0000:03:00.0: Signaling PME through PCIe PME interrupt
[ 2.349405] pcie_pme 0000:00:1c.2:pcie01: service driver pcie_pme loaded
[ 2.349419] pcieport 0000:00:1c.3: Signaling PME through PCIe PME interrupt
[ 2.349420] pci 0000:04:00.0: Signaling PME through PCIe PME interrupt
[ 2.349424] pcie_pme 0000:00:1c.3:pcie01: service driver pcie_pme loaded
[ 2.349437] pcieport 0000:00:1c.4: Signaling PME through PCIe PME interrupt
[ 2.349439] pci 0000:05:00.0: Signaling PME through PCIe PME interrupt
[ 2.349448] pcie_pme 0000:00:1c.4:pcie01: service driver pcie_pme loaded
[ 2.351884] simple-framebuffer simple-framebuffer.0: framebuffer at 0xb0000000, 0x1437000 bytes, mapped to 0xffffc90009e00000
[ 2.351886] simple-framebuffer simple-framebuffer.0: format=a8r8g8b8, mode=2880x1800x32, linelength=11776
[ 2.360653] Console: switching to colour frame buffer device 360x112
[ 2.369335] simple-framebuffer simple-framebuffer.0: fb0: simplefb registered!
[ 2.369376] intel_idle: MWAIT substates: 0x42120
[ 2.369376] intel_idle: v0.4 model 0x46
[ 2.369376] intel_idle: lapic_timer_reliable_states 0xffffffff
[ 2.369524] input: Lid Switch as /devices/LNXSYSTM:00/device:00/PNP0C0D:00/input/input0
[ 2.369558] ACPI: Lid Switch [LID0]
[ 2.369603] input: Power Button as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input1
[ 2.369623] ACPI: Power Button [PWRB]
[ 2.369668] input: Sleep Button as /devices/LNXSYSTM:00/device:00/PNP0C0E:00/input/input2
[ 2.369687] ACPI: Sleep Button [SLPB]
[ 2.369730] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input3
[ 2.369747] ACPI: Power Button [PWRF]
[ 2.370188] ahci 0000:05:00.0: version 3.0
[ 2.370265] ahci 0000:05:00.0: irq 48 for MSI/MSI-X
[ 2.380812] ahci 0000:05:00.0: AHCI 0001.0300 32 slots 1 ports 6 Gbps 0x1 impl SATA mode
[ 2.380841] ahci 0000:05:00.0: flags: 64bit ncq led clo only pio ccc
[ 2.381245] scsi0 : ahci
[ 2.381375] ata1: SATA max UDMA/133 abar m8192@0xc1b00000 port 0xc1b00100 irq 48
[ 2.381675] i8042: PNP: No PS/2 controller found. Probing ports directly.
[ 2.687638] ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
[ 2.687794] ata1.00: FORCE: horkage modified (noncq)
[ 2.687845] ata1.00: unexpected _GTF length (8)
[ 2.687898] ata1.00: ATA-8: APPLE SSD SM0512F, UXM2JA1Q, max UDMA/133
[ 2.687913] ata1.00: 977105060 sectors, multi 16: LBA48 NCQ (not used)
[ 2.688100] ata1.00: unexpected _GTF length (8)
[ 2.688152] ata1.00: configured for UDMA/133
[ 2.688228] scsi 0:0:0:0: Direct-Access ATA APPLE SSD SM0512 UXM2 PQ: 0 ANSI: 5
[ 2.688511] sd 0:0:0:0: [sda] 977105060 512-byte logical blocks: (500 GB/465 GiB)
[ 2.688537] sd 0:0:0:0: [sda] 4096-byte physical blocks
[ 2.688623] sd 0:0:0:0: Attached scsi generic sg0 type 0
[ 2.688691] sd 0:0:0:0: [sda] Write Protect is off
[ 2.688704] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 2.688741] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 2.690971] sda: sda1 sda2 sda3
[ 2.691642] sd 0:0:0:0: [sda] Attached SCSI disk
[ 3.344327] tsc: Refined TSC clocksource calibration: 2294.686 MHz
[ 3.515417] i8042: No controller found
[ 3.515694] mousedev: PS/2 mouse device common for all mice
[ 3.515823] rtc_cmos 00:05: RTC can wake from S4
[ 3.516058] rtc_cmos 00:05: rtc core: registered rtc_cmos as rtc0
[ 3.516109] rtc_cmos 00:05: alarms up to one month, y3k, 242 bytes nvram, hpet irqs
[ 3.516225] Intel P-state driver initializing.
[ 3.516241] Intel pstate controlling: cpu 0
[ 3.516258] Intel pstate controlling: cpu 1
[ 3.516287] Intel pstate controlling: cpu 2
[ 3.516300] Intel pstate controlling: cpu 3
[ 3.516324] Intel pstate controlling: cpu 4
[ 3.516349] Intel pstate controlling: cpu 5
[ 3.516383] Intel pstate controlling: cpu 6
[ 3.516397] Intel pstate controlling: cpu 7
[ 3.516654] hidraw: raw HID events driver (C) Jiri Kosina
[ 3.517230] TCP: cubic registered
[ 3.517854] registered taskstats version 1
[ 3.518441] rtc_cmos 00:05: setting system clock to 2014-01-08 06:50:06 UTC (1389163806)
[ 3.519383] EXT4-fs (sda2): INFO: recovery required on readonly filesystem
[ 3.519405] EXT4-fs (sda2): write access will be enabled during recovery
[ 3.541342] EXT4-fs (sda2): recovery complete
[ 3.545139] EXT4-fs (sda2): mounted filesystem with ordered data mode. Opts: (null)
[ 3.545178] VFS: Mounted root (ext4 filesystem) readonly on device 8:2.
[ 3.545697] Freeing unused kernel memory: 836K (ffffffff8167b000 - ffffffff8174c000)
[ 3.545723] Write protecting the kernel read-only data: 6144k
[ 3.546342] Freeing unused kernel memory: 264K (ffff8800013be000 - ffff880001400000)
[ 3.547294] Freeing unused kernel memory: 620K (ffff880001565000 - ffff880001600000)
[ 3.766838] NET: Registered protocol family 1
[ 3.773149] systemd-udevd[839]: starting version 208
[ 3.774243] random: udevd urandom read with 73 bits of entropy available
[ 3.799536] ACPI: AC Adapter [ADP1] (on-line)
[ 3.806167] ACPI: bus type USB registered
[ 3.806203] usbcore: registered new interface driver usbfs
[ 3.806222] Linux agpgart interface v0.103
[ 3.806226] usbcore: registered new interface driver hub
[ 3.806270] usbcore: registered new device driver usb
[ 3.808618] apple_gmux: Found gmux version 4.0.8 [indexed]
[ 3.810542] [drm] Initialized drm 1.1.0 20060810
[ 3.810834] xhci_hcd 0000:00:14.0: enabling bus mastering
[ 3.810845] xhci_hcd 0000:00:14.0: xHCI Host Controller
[ 3.810850] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 1
[ 3.811009] xhci_hcd 0000:00:14.0: cache line size of 256 is not supported
[ 3.811026] xhci_hcd 0000:00:14.0: irq 49 for MSI/MSI-X
[ 3.811749] hub 1-0:1.0: USB hub found
[ 3.811774] hub 1-0:1.0: 14 ports detected
[ 3.812412] xhci_hcd 0000:00:14.0: xHCI Host Controller
[ 3.812415] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 2
[ 3.812620] hub 2-0:1.0: USB hub found
[ 3.812653] hub 2-0:1.0: 6 ports detected
[ 3.820187] snd_hda_intel 0000:00:1b.0: irq 50 for MSI/MSI-X
[ 3.823369] microcode: CPU0 sig=0x40661, pf=0x20, revision=0xf
[ 3.824299] lib80211: common routines for IEEE802.11 drivers
[ 3.824300] lib80211_crypt: registered algorithm 'NULL'
[ 3.826727] platform microcode: Direct firmware load failed with error -2
[ 3.826729] platform microcode: Falling back to user helper
[ 3.826922] microcode: CPU1 sig=0x40661, pf=0x20, revision=0xf
[ 3.826931] platform microcode: Direct firmware load failed with error -2
[ 3.826933] platform microcode: Falling back to user helper
[ 3.827175] microcode: CPU2 sig=0x40661, pf=0x20, revision=0xf
[ 3.827183] platform microcode: Direct firmware load failed with error -2
[ 3.827185] platform microcode: Falling back to user helper
[ 3.827384] microcode: CPU3 sig=0x40661, pf=0x20, revision=0xf
[ 3.827391] platform microcode: Direct firmware load failed with error -2
[ 3.827392] platform microcode: Falling back to user helper
[ 3.827588] microcode: CPU4 sig=0x40661, pf=0x20, revision=0xf
[ 3.827596] platform microcode: Direct firmware load failed with error -2
[ 3.827597] platform microcode: Falling back to user helper
[ 3.827812] microcode: CPU5 sig=0x40661, pf=0x20, revision=0xf
[ 3.827819] platform microcode: Direct firmware load failed with error -2
[ 3.827820] platform microcode: Falling back to user helper
[ 3.828035] microcode: CPU6 sig=0x40661, pf=0x20, revision=0xf
[ 3.828043] platform microcode: Direct firmware load failed with error -2
[ 3.828044] platform microcode: Falling back to user helper
[ 3.828290] microcode: CPU7 sig=0x40661, pf=0x20, revision=0xf
[ 3.828295] platform microcode: Direct firmware load failed with error -2
[ 3.828296] platform microcode: Falling back to user helper
[ 3.828545] microcode: Microcode Update Driver: v2.00 <tigran@aivazian.fsnet.co.uk>, Peter Oruba
[ 3.831290] cfg80211: Calling CRDA to update world regulatory domain
[ 3.835799] input: HDA Intel PCH SPDIF as /devices/pci0000:00/0000:00:1b.0/sound/card1/input6
[ 3.835853] input: HDA Intel PCH Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card1/input5
[ 3.835893] input: HDA Intel PCH Mic as /devices/pci0000:00/0000:00:1b.0/sound/card1/input4
[ 3.836050] i801_smbus 0000:00:1f.3: enabling device (0000 -> 0003)
[ 3.836052] snd_hda_intel 0000:01:00.1: enabling device (0000 -> 0002)
[ 3.836102] hda_intel: Disabling MSI
[ 3.836107] hda-intel 0000:01:00.1: Handle VGA-switcheroo audio client
[ 3.836146] snd_hda_intel 0000:01:00.1: enabling bus mastering
[ 3.836149] ACPI Warning: 0x000000000000efa0-0x000000000000efbf SystemIO conflicts with Region \_SB_.PCI0.SBUS.SMBI 1 (20131115/utaddress-251)
[ 3.836153] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[ 3.836410] [drm:i915_dump_device_info], i915 device info: gen=7, pciid=0x0d26 flags=is_mobile,need_gfx_hws,is_haswell,has_fbc,has_hotplug,has_llc,has_ddi,has_fpga_dbg,
[ 3.836635] [drm] Found 128MB of eLLC
[ 3.836637] [drm:intel_detect_pch], Found LynxPoint PCH
[ 3.837061] [drm] Memory usable by graphics device = 2048M
[ 3.837062] [drm:i915_gem_gtt_init], GMADR size = 256M
[ 3.837063] [drm:i915_gem_gtt_init], GTT stolen size = 64M
[ 3.837064] checking generic (b0000000 1437000) vs hw (b0000000 10000000)
[ 3.837065] fb: conflicting fb hw usage inteldrmfb vs simple - removing generic driver
[ 3.837079] Console: switching to colour dummy device 80x25
[ 3.855195] wl: module license 'Mixed/Proprietary' taints kernel.
[ 3.855197] Disabling lock debugging due to kernel taint
[ 3.860411] cfg80211: World regulatory domain updated:
[ 3.860413] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
[ 3.860415] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 3.860416] cfg80211: (2457000 KHz - 2482000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 3.860416] cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[ 3.860417] cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 3.860418] cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 3.863652] [drm:intel_opregion_setup], graphic opregion physical addr: 0x7ad18190
[ 3.863675] [drm:intel_opregion_setup], Public ACPI methods supported
[ 3.863676] [drm:intel_opregion_setup], SWSCI supported
[ 3.867029] [drm:swsci_setup], SWSCI GBDA callbacks 00040001, SBCB callbacks 00200001
[ 3.867031] [drm:intel_opregion_setup], ASLE supported
[ 3.867386] i915 0000:00:02.0: irq 51 for MSI/MSI-X
[ 3.867397] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
[ 3.867398] [drm] Driver supports precise vblank timestamp query.
[ 3.867399] [drm:init_vbt_defaults], Set default to SSC at 120MHz
[ 3.867400] [drm:intel_parse_bios], Using VBT from OpRegion: $VBT HASWELL d
[ 3.867401] [drm:parse_general_features], BDB_GENERAL_FEATURES int_tv_support 0 int_crt_support 0 lvds_use_ssc 0 lvds_ssc_freq 120 display_clock_mode 0 fdi_rx_polarity_inverted 0
[ 3.867402] [drm:parse_general_definitions], crt_ddc_bus_pin: 0
[ 3.867404] [drm:parse_lfp_panel_data], Found panel mode in BIOS VBT tables:
[ 3.867405] [drm:drm_mode_debug_printmodeline], Modeline 0:"1024x768" 0 65000 1024 1048 1184 1344 768 771 777 806 0x8 0xa
[ 3.867407] [drm:parse_lfp_panel_data], VBT initial LVDS value 300
[ 3.867408] [drm:parse_sdvo_panel_data], Found SDVO panel mode in BIOS VBT tables:
[ 3.867408] [drm:drm_mode_debug_printmodeline], Modeline 0:"1600x1200" 0 162000 1600 1664 1856 2160 1200 1201 1204 1250 0x8 0xa
[ 3.867410] [drm:parse_sdvo_device_mapping], No SDVO device info is found in VBT
[ 3.867411] [drm:parse_mipi], No MIPI BDB found
[ 3.867412] [drm:parse_ddi_port],
[ 3.867412] Port A VBT info: DP:1 HDMI:0 DVI:0 EDP:1 CRT:0
[ 3.867413] [drm:parse_ddi_port], VBT HDMI level shift for port A: 0
[ 3.867414] [drm:parse_ddi_port], Port B VBT info: DP:1 HDMI:1 DVI:1 EDP:0 CRT:0
[ 3.867415] [drm:parse_ddi_port], VBT HDMI level shift for port B: 6
[ 3.867415] [drm:parse_ddi_port], Port C VBT info: DP:1 HDMI:1 DVI:1 EDP:0 CRT:0
[ 3.867416] [drm:parse_ddi_port], VBT HDMI level shift for port C: 6
[ 3.867417] [drm:parse_ddi_port], Port D VBT info: DP:0 HDMI:1 DVI:1 EDP:0 CRT:0
[ 3.867417] [drm:parse_ddi_port], VBT HDMI level shift for port D: 6
[ 3.867447] [drm:intel_dsm_pci_probe], failed to get supported _DSM functions
[ 3.867448] [drm:intel_dsm_detect], VGA switcheroo: detected DSM switching method \_SB_.PCI0.IGPU handle
[ 3.867452] [drm:i915_gem_init_stolen], found 67108864 bytes of stolen memory at 7ba00000
[ 3.867724] [drm:intel_print_wm_latency], Primary WM0 latency 20 (2.0 usec)
[ 3.867725] [drm:intel_print_wm_latency], Primary WM1 latency 4 (2.0 usec)
[ 3.867726] [drm:intel_print_wm_latency], Primary WM2 latency 36 (18.0 usec)
[ 3.867726] [drm:intel_print_wm_latency], Primary WM3 latency 70 (35.0 usec)
[ 3.867727] [drm:intel_print_wm_latency], Primary WM4 latency 160 (80.0 usec)
[ 3.867728] [drm:intel_print_wm_latency], Sprite WM0 latency 20 (2.0 usec)
[ 3.867728] [drm:intel_print_wm_latency], Sprite WM1 latency 4 (2.0 usec)
[ 3.867729] [drm:intel_print_wm_latency], Sprite WM2 latency 36 (18.0 usec)
[ 3.867730] [drm:intel_print_wm_latency], Sprite WM3 latency 70 (35.0 usec)
[ 3.867730] [drm:intel_print_wm_latency], Sprite WM4 latency 160 (80.0 usec)
[ 3.867731] [drm:intel_print_wm_latency], Cursor WM0 latency 20 (2.0 usec)
[ 3.867732] [drm:intel_print_wm_latency], Cursor WM1 latency 4 (2.0 usec)
[ 3.867732] [drm:intel_print_wm_latency], Cursor WM2 latency 36 (18.0 usec)
[ 3.867733] [drm:intel_print_wm_latency], Cursor WM3 latency 70 (35.0 usec)
[ 3.867734] [drm:intel_print_wm_latency], Cursor WM4 latency 160 (80.0 usec)
[ 3.867735] [drm:intel_modeset_init], 3 display pipes available.
[ 3.867747] [drm:intel_ddi_pll_init], CDCLK running at 540000KHz
[ 3.867748] [drm:intel_shared_dpll_init], 0 shared PLLs initialized
[ 3.867764] vgaarb: device changed decodes: PCI:0000:00:02.0,olddecodes=io+mem,decodes=none:owns=none
[ 3.868806] [drm:intel_dp_init_connector], Adding eDP connector on port A
[ 3.868816] [drm:intel_dp_i2c_init], i2c_init DPDDC-A
[ 3.868887] [drm:ironlake_edp_panel_vdd_on], Turning eDP VDD on
[ 3.869074] [drm:ironlake_edp_panel_vdd_on], PP_STATUS: 0x80000008 PP_CONTROL: 0xabcd000f
[ 3.871943] [drm:intel_dp_i2c_aux_ch], aux_i2c nack
[ 3.872787] ACPI: Battery Slot [BAT0] (battery present)
[ 3.874200] [drm:intel_dp_i2c_aux_ch], aux_i2c nack
[ 3.874382] [drm:ironlake_panel_vdd_off_sync], Turning eDP VDD off
[ 3.874899] [drm:ironlake_panel_vdd_off_sync], PP_STATUS: 0x80000008 PP_CONTROL: 0xabcd0007
[ 3.876619] [drm:intel_dp_init_panel_power_sequencer], cur t1_t3 125 t8 2100 t9 2500 t10 740 t11_t12 6000
[ 3.876620] [drm:intel_dp_init_panel_power_sequencer], vbt t1_t3 2000 t8 10 t9 2000 t10 500 t11_t12 5000
[ 3.876621] [drm:intel_dp_init_panel_power_sequencer], panel power up delay 200, power down delay 74, power cycle delay 600
[ 3.876622] [drm:intel_dp_init_panel_power_sequencer], backlight on delay 210, off delay 250
[ 3.876704] [drm:ironlake_edp_panel_vdd_on], Turning eDP VDD on
[ 3.877558] [drm:ironlake_edp_panel_vdd_on], PP_STATUS: 0x80000008 PP_CONTROL: 0xabcd000f
[ 3.879961] [drm:intel_dp_get_dpcd], DPCD: 11 0a 84 41 00 00 01 c0 02 00 00 00 0f 01 00
[ 3.882653] [drm:intel_dp_init_panel_power_sequencer_registers], panel power sequencer register settings: PP_ON 0x7d00834, PP_OFF 0x2e409c4, PP_DIV 0x186906
[ 3.888798] [drm:i2c_algo_dp_aux_xfer], dp_aux_xfer return 2
[ 3.895156] INFO @wl_cfg80211_attach : Registered CFG80211 phy
[ 3.896421] lib80211_crypt: registered algorithm 'TKIP'
[ 3.896584] wlan0: Broadcom BCM43a0 802.11 Hybrid Wireless Controller 6.30.223.141 (r415941)
[ 3.910485] applesmc: key=614 fan=2 temp=41 index=40 acc=0 lux=2 kbd=1
[ 3.911289] [drm:i2c_algo_dp_aux_xfer], dp_aux_xfer return 2
[ 3.911296] [drm:drm_edid_to_eld], ELD: no CEA Extension found
[ 3.911298] [drm:intel_panel_get_backlight], get backlight PWM = 0
[ 3.911306] [drm:intel_panel_get_max_backlight], max backlight PWM = 1953
[ 3.918000] systemd-udevd[864]: renamed network interface wlan0 to wlp3s0
[ 3.925993] [drm:i915_gem_setup_global_gtt], clearing unused GTT space: [0, 7fdff000]
[ 3.928036] [drm:init_status_page], render ring hws offset: 0x00000000
[ 3.929988] [drm:init_pipe_control], render ring pipe control offset: 0x00021000
[ 3.929996] [drm:init_status_page], bsd ring hws offset: 0x00022000
[ 3.930059] [drm:init_status_page], blitter ring hws offset: 0x00043000
[ 3.930113] [drm:init_status_page], video enhancement ring hws offset: 0x00064000
[ 3.930197] [drm:create_default_context], Default HW context loaded
[ 3.930198] [drm:i915_gem_context_init], HW context support initialized
[ 3.930267] [drm:intel_crt_reset], pch crt adpa set to 0xf40000
[ 3.930271] [drm:intel_modeset_readout_hw_state], [CRTC:3] hw state readout: enabled
[ 3.930273] [drm:intel_modeset_readout_hw_state], [CRTC:5] hw state readout: disabled
[ 3.930275] [drm:intel_modeset_readout_hw_state], [CRTC:7] hw state readout: disabled
[ 3.930276] [drm:intel_ddi_get_crtc_pll], Pipe A connected to port A using clock 0x20000000
[ 3.930279] [drm:intel_modeset_readout_hw_state], [ENCODER:10:DAC-10] hw state readout: disabled, pipe A
[ 3.930282] [drm:intel_ddi_get_config], pipe has 24 bpp for eDP panel, overriding BIOS-provided max 18 bpp
[ 3.930283] [drm:intel_modeset_readout_hw_state], [ENCODER:11:TMDS-11] hw state readout: enabled, pipe A
[ 3.930285] [drm:intel_modeset_readout_hw_state], [CONNECTOR:12:eDP-1] hw state readout: enabled
[ 3.930287] [drm:intel_modeset_readout_hw_state], [CONNECTOR:9:VGA-1] hw state readout: disabled
[ 3.930289] [drm:intel_dump_pipe_config], [CRTC:3][setup_hw_state] config for pipe A
[ 3.930290] [drm:intel_dump_pipe_config], cpu_transcoder: P
[ 3.930291] [drm:intel_dump_pipe_config], pipe bpp: 24, dithering: 0
[ 3.930292] [drm:intel_dump_pipe_config], fdi/pch: 0, lanes: 0, gmch_m: 0, gmch_n: 0, link_m: 0, link_n: 0, tu: 0
[ 3.930293] [drm:intel_dump_pipe_config], dp: 1, gmch_m: 7870145, gmch_n: 8388608, link_m: 655845, link_n: 524288, tu: 64
[ 3.930295] [drm:intel_dump_pipe_config], requested mode:
[ 3.930296] [drm:drm_mode_debug_printmodeline], Modeline 0:"" 0 0 2880 0 0 0 1800 0 0 0 0x0 0x0
[ 3.930298] [drm:intel_dump_pipe_config], adjusted mode:
[ 3.930298] [drm:drm_mode_debug_printmodeline], Modeline 0:"" 0 0 0 0 0 0 0 0 0 0 0x0 0x9
[ 3.930300] [drm:intel_dump_crtc_timings], crtc timings: 0 2880 2928 2960 3040 1800 1803 1809 1852, type: 0x0 flags: 0x9
[ 3.930301] [drm:intel_dump_pipe_config], port clock: 0
[ 3.930302] [drm:intel_dump_pipe_config], pipe src size: 2880x1800
[ 3.930303] [drm:intel_dump_pipe_config], gmch pfit: control: 0x00000000, ratios: 0x00000000, lvds border: 0x00000000
[ 3.930304] [drm:intel_dump_pipe_config], pch pfit: pos: 0x00000000, size: 0x00000000, disabled
[ 3.930306] [drm:intel_dump_pipe_config], ips: 0
[ 3.930306] [drm:intel_dump_pipe_config], double wide: 0
[ 3.930308] [drm:intel_dump_pipe_config], [CRTC:5][setup_hw_state] config for pipe B
[ 3.930309] [drm:intel_dump_pipe_config], cpu_transcoder: B
[ 3.930309] [drm:intel_dump_pipe_config], pipe bpp: 0, dithering: 0
[ 3.930310] [drm:intel_dump_pipe_config], fdi/pch: 0, lanes: 0, gmch_m: 0, gmch_n: 0, link_m: 0, link_n: 0, tu: 0
[ 3.930312] [drm:intel_dump_pipe_config], dp: 0, gmch_m: 0, gmch_n: 0, link_m: 0, link_n: 0, tu: 0
[ 3.930313] [drm:intel_dump_pipe_config], requested mode:
[ 3.930313] [drm:drm_mode_debug_printmodeline], Modeline 0:"" 0 0 0 0 0 0 0 0 0 0 0x0 0x0
[ 3.930315] [drm:intel_dump_pipe_config], adjusted mode:
[ 3.930315] [drm:drm_mode_debug_printmodeline], Modeline 0:"" 0 0 0 0 0 0 0 0 0 0 0x0 0x0
[ 3.930317] [drm:intel_dump_crtc_timings], crtc timings: 0 0 0 0 0 0 0 0 0, type: 0x0 flags: 0x0
[ 3.930318] [drm:intel_dump_pipe_config], port clock: 0
[ 3.930319] [drm:intel_dump_pipe_config], pipe src size: 0x0
[ 3.930320] [drm:intel_dump_pipe_config], gmch pfit: control: 0x00000000, ratios: 0x00000000, lvds border: 0x00000000
[ 3.930321] [drm:intel_dump_pipe_config], pch pfit: pos: 0x00000000, size: 0x00000000, disabled
[ 3.930322] [drm:intel_dump_pipe_config], ips: 0
[ 3.930322] [drm:intel_dump_pipe_config], double wide: 0
[ 3.930324] [drm:intel_dump_pipe_config], [CRTC:7][setup_hw_state] config for pipe C
[ 3.930325] [drm:intel_dump_pipe_config], cpu_transcoder: C
[ 3.930325] [drm:intel_dump_pipe_config], pipe bpp: 0, dithering: 0
[ 3.930326] [drm:intel_dump_pipe_config], fdi/pch: 0, lanes: 0, gmch_m: 0, gmch_n: 0, link_m: 0, link_n: 0, tu: 0
[ 3.930327] [drm:intel_dump_pipe_config], dp: 0, gmch_m: 0, gmch_n: 0, link_m: 0, link_n: 0, tu: 0
[ 3.930328] [drm:intel_dump_pipe_config], requested mode:
[ 3.930329] [drm:drm_mode_debug_printmodeline], Modeline 0:"" 0 0 0 0 0 0 0 0 0 0 0x0 0x0
[ 3.930330] [drm:intel_dump_pipe_config], adjusted mode:
[ 3.930331] [drm:drm_mode_debug_printmodeline], Modeline 0:"" 0 0 0 0 0 0 0 0 0 0 0x0 0x0
[ 3.930332] [drm:intel_dump_crtc_timings], crtc timings: 0 0 0 0 0 0 0 0 0, type: 0x0 flags: 0x0
[ 3.930334] [drm:intel_dump_pipe_config], port clock: 0
[ 3.930334] [drm:intel_dump_pipe_config], pipe src size: 0x0
[ 3.930335] [drm:intel_dump_pipe_config], gmch pfit: control: 0x00000000, ratios: 0x00000000, lvds border: 0x00000000
[ 3.930336] [drm:intel_dump_pipe_config], pch pfit: pos: 0x00000000, size: 0x00000000, disabled
[ 3.930337] [drm:intel_dump_pipe_config], ips: 0
[ 3.930338] [drm:intel_dump_pipe_config], double wide: 0
[ 3.930342] [drm:intel_connector_check_state], [CONNECTOR:12:eDP-1]
[ 3.930343] [drm:check_encoder_state], [ENCODER:10:DAC-10]
[ 3.930345] [drm:check_encoder_state], [ENCODER:11:TMDS-11]
[ 3.930346] [drm:check_crtc_state], [CRTC:3]
[ 3.930350] [drm:check_crtc_state], [CRTC:5]
[ 3.930352] [drm:check_crtc_state], [CRTC:7]
[ 3.930367] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:12:eDP-1]
[ 3.930368] [drm:intel_dp_detect], [CONNECTOR:12:eDP-1]
[ 3.930597] [drm:intel_dp_probe_oui], Sink OUI: 0010fa
[ 3.930781] [drm:intel_dp_probe_oui], Branch OUI: 000000
[ 3.930791] [drm:drm_edid_to_eld], ELD: no CEA Extension found
[ 3.930794] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:12:eDP-1] probed modes :
[ 3.930796] [drm:drm_mode_debug_printmodeline], Modeline 13:"2880x1800" 60 337750 2880 2928 2960 3040 1800 1803 1809 1852 0x48 0x9
[ 3.930799] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:9:VGA-1]
[ 3.930801] [drm:intel_crt_detect], [CONNECTOR:9:VGA-1] force=1
[ 3.930809] [drm:intel_ironlake_crt_detect_hotplug], trigger hotplug detect cycle: adpa=0xf40000
[ 3.939980] [drm:intel_ironlake_crt_detect_hotplug], ironlake hotplug adpa=0xf40000, result 0
[ 3.939983] [drm:intel_crt_detect], CRT not detected via hotplug
[ 3.990935] [drm] GMBUS [i915 gmbus vga] timed out, falling back to bit banging on pin 2
[ 3.998903] [drm:drm_do_probe_ddc_edid], drm: skipping non-existent adapter i915 gmbus vga
[ 3.998905] [drm:intel_crt_detect_ddc], CRT not detected via DDC:0x50 [no valid EDID found]
[ 3.998907] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:9:VGA-1] disconnected
[ 3.998909] [drm:drm_setup_crtcs],
[ 3.998910] [drm:drm_enable_connectors], connector 12 enabled? yes
[ 3.998911] [drm:drm_enable_connectors], connector 9 enabled? no
[ 3.998912] [drm:drm_target_preferred], looking for cmdline mode on connector 12
[ 3.998913] [drm:drm_target_preferred], looking for preferred mode on connector 12
[ 3.998914] [drm:drm_target_preferred], found mode 2880x1800
[ 3.998915] [drm:drm_setup_crtcs], picking CRTCs for 8192x8192 config
[ 3.998918] [drm:drm_setup_crtcs], desired mode 2880x1800 set on crtc 3
[ 3.998921] [drm:i915_gem_object_create_stolen], creating stolen object: size=13c7000
[ 3.998925] [drm:i915_pages_create_for_stolen], offset=0x0, size=20738048
[ 4.003031] [drm:intelfb_create], allocated 2880x1800 fb: 0x000c0000, bo ffff88046a232000
[ 4.003106] fbcon: inteldrmfb (fb0) is primary device
[ 4.003141] [drm:intel_crtc_set_config], [CRTC:3] [FB:20] #connectors=1 (x y) (0 0)
[ 4.003142] [drm:intel_set_config_compute_mode_changes], inactive crtc, full mode set
[ 4.003143] [drm:intel_set_config_compute_mode_changes], modes are different, full mode set
[ 4.003144] [drm:drm_mode_debug_printmodeline], Modeline 0:"" 0 0 0 0 0 0 0 0 0 0 0x0 0x0
[ 4.003146] [drm:drm_mode_debug_printmodeline], Modeline 19:"2880x1800" 60 337750 2880 2928 2960 3040 1800 1803 1809 1852 0x48 0x9
[ 4.003147] [drm:intel_set_config_compute_mode_changes], computed changes for [CRTC:3], mode_changed=1, fb_changed=0
[ 4.003148] [drm:intel_modeset_stage_output_state], [CONNECTOR:12:eDP-1] to [CRTC:3]
[ 4.003149] [drm:intel_modeset_affected_pipes], set mode pipe masks: modeset: 1, prepare: 1, disable: 0
[ 4.003151] [drm:connected_sink_compute_bpp], [CONNECTOR:12:eDP-1] checking for sink bpp constrains
[ 4.003153] [drm:intel_dp_compute_config], DP link computation with max lane count 4 max bw 0a pixel clock 337750KHz
[ 4.003156] [drm:intel_dp_compute_config], DP link bw 0a lane count 4 clock 270000 bpp 24
[ 4.003157] [drm:intel_dp_compute_config], DP link bw required 810600 available 864000
[ 4.003158] [drm:intel_modeset_pipe_config], plane bpp: 24, pipe bpp: 24, dithering: 0
[ 4.003159] [drm:intel_dump_pipe_config], [CRTC:3][modeset] config for pipe A
[ 4.003160] [drm:intel_dump_pipe_config], cpu_transcoder: P
[ 4.003160] [drm:intel_dump_pipe_config], pipe bpp: 24, dithering: 0
[ 4.003161] [drm:intel_dump_pipe_config], fdi/pch: 0, lanes: 0, gmch_m: 0, gmch_n: 0, link_m: 0, link_n: 0, tu: 0
[ 4.003162] [drm:intel_dump_pipe_config], dp: 1, gmch_m: 7870145, gmch_n: 8388608, link_m: 655845, link_n: 524288, tu: 64
[ 4.003162] [drm:intel_dump_pipe_config], requested mode:
[ 4.003163] [drm:drm_mode_debug_printmodeline], Modeline 0:"2880x1800" 60 337750 2880 2928 2960 3040 1800 1803 1809 1852 0x48 0x9
[ 4.003164] [drm:intel_dump_pipe_config], adjusted mode:
[ 4.003165] [drm:drm_mode_debug_printmodeline], Modeline 0:"2880x1800" 60 337750 2880 2928 2960 3040 1800 1803 1809 1852 0x48 0x9
[ 4.003166] [drm:intel_dump_crtc_timings], crtc timings: 337750 2880 2928 2960 3040 1800 1803 1809 1852, type: 0x48 flags: 0x9
[ 4.003166] [drm:intel_dump_pipe_config], port clock: 270000
[ 4.003167] [drm:intel_dump_pipe_config], pipe src size: 2880x1800
[ 4.003167] [drm:intel_dump_pipe_config], gmch pfit: control: 0x00000000, ratios: 0x00000000, lvds border: 0x00000000
[ 4.003168] [drm:intel_dump_pipe_config], pch pfit: pos: 0x00000000, size: 0x00000000, disabled
[ 4.003168] [drm:intel_dump_pipe_config], ips: 0
[ 4.003169] [drm:intel_dump_pipe_config], double wide: 0
[ 4.010975] input: HDA NVidia HDMI/DP,pcm=8 as /devices/pci0000:00/0000:00:01.0/0000:01:00.1/sound/card2/input9
[ 4.011072] input: HDA NVidia HDMI/DP,pcm=7 as /devices/pci0000:00/0000:00:01.0/0000:01:00.1/sound/card2/input8
[ 4.011162] input: HDA NVidia HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:01.0/0000:01:00.1/sound/card2/input7
[ 4.016316] usb 2-4: new SuperSpeed USB device number 2 using xhci_hcd
[ 4.017937] [drm:intel_panel_actually_set_backlight], set backlight PWM = 0
[ 4.017941] [drm:ironlake_edp_backlight_off],
[ 4.035902] usb-storage 2-4:1.0: USB Mass Storage device detected
[ 4.036103] scsi1 : usb-storage 2-4:1.0
[ 4.036991] usbcore: registered new interface driver usb-storage
[ 4.183897] usb 1-5: new full-speed USB device number 2 using xhci_hcd
[ 4.284998] [drm:ironlake_edp_panel_off], Turn eDP power off
[ 4.285003] [drm:ironlake_wait_panel_off], Wait for panel power off time
[ 4.285008] [drm:ironlake_wait_panel_status], mask b000000f value 00000000 status 80000008 control abcd0000
[ 4.343776] Switched to clocksource tsc
[ 4.352834] usb 1-8: new full-speed USB device number 3 using xhci_hcd
[ 4.365559] usb 1-8: ep 0x81 - rounding interval to 1024 microframes, ep desc says 2040 microframes
[ 4.365956] hub 1-8:1.0: USB hub found
[ 4.366089] hub 1-8:1.0: 3 ports detected
[ 4.519739] usb 1-12: new full-speed USB device number 4 using xhci_hcd
[ 4.544454] input: bcm5974 as /devices/pci0000:00/0000:00:14.0/usb1/1-12/1-12:1.2/input/input10
[ 4.544547] usbcore: registered new interface driver bcm5974
[ 4.555302] input: Apple Inc. Apple Internal Keyboard / Trackpad as /devices/pci0000:00/0000:00:14.0/usb1/1-12/1-12:1.0/input/input11
[ 4.555437] apple 0003:05AC:0262.0004: input,hidraw0: USB HID v1.11 Keyboard [Apple Inc. Apple Internal Keyboard / Trackpad] on usb-0000:00:14.0-12/input0
[ 4.628705] usb 1-8.1: new full-speed USB device number 5 using xhci_hcd
[ 4.642449] usb 1-8.1: ep 0x81 - rounding interval to 64 microframes, ep desc says 80 microframes
[ 4.644139] input: HID 05ac:820a as /devices/pci0000:00/0000:00:14.0/usb1/1-8/1-8.1/1-8.1:1.0/input/input12
[ 4.644306] hid-generic 0003:05AC:820A.0006: input,hidraw1: USB HID v1.11 Keyboard [HID 05ac:820a] on usb-0000:00:14.0-8.1/input0
[ 4.678194] apple 0003:05AC:0262.0005: hidraw2: USB HID v1.11 Device [Apple Inc. Apple Internal Keyboard / Trackpad] on usb-0000:00:14.0-12/input1
[ 4.678216] usbcore: registered new interface driver usbhid
[ 4.678217] usbhid: USB HID core driver
[ 4.679920] random: nonblocking pool is initialized
[ 4.682360] logitech-djreceiver 0003:046D:C52B.0003: hiddev0,hidraw3: USB HID v1.11 Device [Logitech USB Receiver] on usb-0000:00:14.0-5/input2
[ 4.685312] input: Logitech Unifying Device. Wireless PID:101b as /devices/pci0000:00/0000:00:14.0/usb1/1-5/1-5:1.2/0003:046D:C52B.0003/input/input13
[ 4.685410] logitech-djdevice 0003:046D:C52B.0007: input,hidraw4: USB HID v1.11 Mouse [Logitech Unifying Device. Wireless PID:101b] on usb-0000:00:14.0-5:1
[ 4.687394] input: Logitech Unifying Device. Wireless PID:4024 as /devices/pci0000:00/0000:00:14.0/usb1/1-5/1-5:1.2/0003:046D:C52B.0003/input/input14
[ 4.687489] logitech-djdevice 0003:046D:C52B.0008: input,hidraw5: USB HID v1.11 Keyboard [Logitech Unifying Device. Wireless PID:4024] on usb-0000:00:14.0-5:2
[ 4.689283] input: Logitech Unifying Device. Wireless PID:101a as /devices/pci0000:00/0000:00:14.0/usb1/1-5/1-5:1.2/0003:046D:C52B.0003/input/input15
[ 4.689378] logitech-djdevice 0003:046D:C52B.0009: input,hidraw6: USB HID v1.11 Mouse [Logitech Unifying Device. Wireless PID:101a] on usb-0000:00:14.0-5:3
[ 4.706634] usb 1-8.2: new full-speed USB device number 6 using xhci_hcd
[ 4.720151] usb 1-8.2: ep 0x81 - rounding interval to 64 microframes, ep desc says 80 microframes
[ 4.721983] input: HID 05ac:820b as /devices/pci0000:00/0000:00:14.0/usb1/1-8/1-8.2/1-8.2:1.0/input/input16
[ 4.722194] hid-generic 0003:05AC:820B.000A: input,hidraw7: USB HID v1.11 Mouse [HID 05ac:820b] on usb-0000:00:14.0-8.2/input0
[ 4.794626] usb 1-8.3: new full-speed USB device number 7 using xhci_hcd
[ 4.813495] Bluetooth: Core ver 2.17
[ 4.813502] NET: Registered protocol family 31
[ 4.813502] Bluetooth: HCI device and connection manager initialized
[ 4.813506] Bluetooth: HCI socket layer initialized
[ 4.813507] Bluetooth: L2CAP socket layer initialized
[ 4.813509] Bluetooth: SCO socket layer initialized
[ 4.814415] usbcore: registered new interface driver btusb
[ 4.933368] usb 1-8.1: USB disconnect, device number 5
[ 5.041059] scsi 1:0:0:0: Direct-Access APPLE SD Card Reader 3.00 PQ: 0 ANSI: 6
[ 5.041187] sd 1:0:0:0: Attached scsi generic sg1 type 0
[ 5.042147] sd 1:0:0:0: [sdb] Attached SCSI removable disk
[ 5.059714] usb 1-8.2: USB disconnect, device number 6
[ 5.164317] [drm:intel_update_fbc], no output, disabling
[ 5.164322] [drm:__intel_set_power_well], Requesting to disable the power well
[ 5.164339] [drm:ironlake_update_plane], Writing base 000C0000 00000000 0 0 11520
[ 5.164343] [drm:intel_crtc_mode_set], [ENCODER:11:TMDS-11] set [MODE:0:2880x1800]
[ 5.164344] [drm:intel_ddi_mode_set], Preparing DDI mode on port A, pipe A
[ 5.164352] [drm:ironlake_edp_panel_vdd_on], Turning eDP VDD on
[ 5.164354] [drm:ironlake_wait_panel_power_cycle], Wait for panel power cycle
[ 5.164357] [drm:ironlake_wait_panel_status], mask b800000f value 00000000 status 00000000 control abcd0000
[ 5.164364] [drm:ironlake_edp_panel_vdd_on], PP_STATUS: 0x00000000 PP_CONTROL: 0xabcd0008
[ 5.164366] [drm:ironlake_edp_panel_vdd_on], eDP was not running
[ 5.365236] [drm:ironlake_edp_panel_on], Turn eDP power on
[ 5.365244] [drm:ironlake_wait_panel_power_cycle], Wait for panel power cycle
[ 5.365248] [drm:ironlake_wait_panel_status], mask b800000f value 00000000 status 00000000 control abcd0008
[ 5.365253] [drm:ironlake_wait_panel_on], Wait for panel power on
[ 5.365256] [drm:ironlake_wait_panel_status], mask b000000f value 80000008 status 0000000a control abcd000b
[ 5.782987] [drm:ironlake_panel_vdd_off_sync], Turning eDP VDD off
[ 5.782995] [drm:ironlake_panel_vdd_off_sync], PP_STATUS: 0x80000008 PP_CONTROL: 0xabcd0003
[ 5.795196] [drm:intel_print_rc6_info], Haswell: only RC6 available
[ 5.795197] [drm] Enabling RC6 states: RC6 on, RC6p off, RC6pp off
[ 5.796913] [drm:gen6_enable_rps], Overclocking supported. Max: 1200MHz, Overclock max: 1200MHz
[ 5.858989] [drm:intel_dp_set_signal_levels], Using signal levels 00000000
[ 5.859468] [drm:intel_dp_set_signal_levels], Using signal levels 00000000
[ 5.859933] [drm:intel_dp_start_link_train], clock recovery OK
[ 5.860711] [drm:intel_dp_complete_link_train], Channel EQ done. DP Training successful
[ 5.911812] [drm:ironlake_wait_for_vblank], vblank wait timed out
[ 5.911983] [drm:ironlake_edp_backlight_on],
[ 6.122728] [drm:intel_panel_enable_backlight], pipe A
[ 6.122730] [drm:intel_panel_get_max_backlight], max backlight PWM = 1953
[ 6.122734] [drm:intel_panel_actually_set_backlight], set backlight PWM = 1953
[ 6.122736] [drm:intel_edp_psr_match_conditions], PSR disable by flag
[ 6.128690] [drm:intel_update_fbc], framebuffer not tiled or fenced, disabling compression
[ 6.146683] [drm:intel_connector_check_state], [CONNECTOR:12:eDP-1]
[ 6.146685] [drm:check_encoder_state], [ENCODER:10:DAC-10]
[ 6.146686] [drm:check_encoder_state], [ENCODER:11:TMDS-11]
[ 6.146687] [drm:check_crtc_state], [CRTC:3]
[ 6.146691] [drm:check_crtc_state], [CRTC:5]
[ 6.146692] [drm:check_crtc_state], [CRTC:7]
[ 6.146695] [drm:intel_crtc_set_config], [CRTC:5] [NOFB]
[ 6.146697] [drm:intel_set_config_compute_mode_changes], computed changes for [CRTC:5], mode_changed=0, fb_changed=0
[ 6.146698] [drm:intel_modeset_stage_output_state], [CONNECTOR:12:eDP-1] to [CRTC:3]
[ 6.146699] [drm:intel_crtc_set_config], [CRTC:7] [NOFB]
[ 6.146700] [drm:intel_set_config_compute_mode_changes], computed changes for [CRTC:7], mode_changed=0, fb_changed=0
[ 6.146701] [drm:intel_modeset_stage_output_state], [CONNECTOR:12:eDP-1] to [CRTC:3]
[ 6.146705] Console: switching to colour frame buffer device 360x112
[ 6.146713] [drm:intel_crtc_set_config], [CRTC:3] [FB:20] #connectors=1 (x y) (0 0)
[ 6.146715] [drm:intel_set_config_compute_mode_changes], computed changes for [CRTC:3], mode_changed=0, fb_changed=0
[ 6.146716] [drm:intel_modeset_stage_output_state], [CONNECTOR:12:eDP-1] to [CRTC:3]
[ 6.161854] i915 0000:00:02.0: fb0: inteldrmfb frame buffer device
[ 6.161854] i915 0000:00:02.0: registered panic notifier
[ 6.162043] [Firmware Bug]: ACPI(GFX0) defines _DOD but not _DOS
[ 6.162055] ACPI: Video Device [GFX0] (multi-head: yes rom: yes post: no)
[ 6.162093] input: Video Bus as /devices/LNXSYSTM:00/device:00/PNP0A08:00/device:02/LNXVIDEO:00/input/input17
[ 6.167185] ACPI: Video Device [IGPU] (multi-head: yes rom: no post: no)
[ 6.167226] input: Video Bus as /devices/LNXSYSTM:00/device:00/PNP0A08:00/LNXVIDEO:01/input/input18
[ 6.167260] [drm] Initialized i915 1.6.0 20080730 for 0000:00:02.0 on minor 0
[ 6.167549] [drm:__intel_set_power_well], Enabling power well
[ 6.167575] snd_hda_intel 0000:00:03.0: irq 52 for MSI/MSI-X
[ 6.172509] input: HDA Intel HDMI HDMI/DP,pcm=8 as /devices/pci0000:00/0000:00:03.0/sound/card0/input21
[ 6.172556] input: HDA Intel HDMI HDMI/DP,pcm=7 as /devices/pci0000:00/0000:00:03.0/sound/card0/input20
[ 6.172593] input: HDA Intel HDMI HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:03.0/sound/card0/input19
[ 7.285389] EXT4-fs (sda2): re-mounted. Opts: user_xattr
[ 7.350312] EXT4-fs (sda3): mounted filesystem with ordered data mode. Opts: user_xattr
[ 7.644985] type=1006 audit(1389163810.467:2): pid=1257 uid=0 old auid=4294967295 new auid=0 old ses=4294967295 new ses=1 res=1
[ 8.845860] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
[ 8.845867] Bluetooth: BNEP socket layer initialized
[ 8.848519] Bluetooth: RFCOMM TTY layer initialized
[ 8.848524] Bluetooth: RFCOMM socket layer initialized
[ 8.848527] Bluetooth: RFCOMM ver 1.11
[ 9.026861] NET: Registered protocol family 17
[ 13.649245] type=1006 audit(1389163816.474:3): pid=1486 uid=0 old auid=4294967295 new auid=1000 old ses=4294967295 new ses=2 res=1
[ 13.785595] cfg80211: Calling CRDA for country: US
[ 13.787150] cfg80211: Regulatory domain changed to country: US
[ 13.787152] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
[ 13.787153] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2700 mBm)
[ 13.787154] cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 1700 mBm)
[ 13.787154] cfg80211: (5250000 KHz - 5330000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 13.787155] cfg80211: (5490000 KHz - 5600000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 13.787156] cfg80211: (5650000 KHz - 5710000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 13.787156] cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 3000 mBm)
[ 13.787157] cfg80211: (57240000 KHz - 63720000 KHz @ 2160000 KHz), (N/A, 4000 mBm)
[ 19.384208] wmi: Mapper loaded
[ 19.389520] ACPI Warning: \_SB_.PCI0.IGPU._DSM: Argument #4 type mismatch - Found [Integer], ACPI requires [Package] (20131115/nsarguments-95)
[ 19.389544] ACPI Warning: \_SB_.PCI0.IGPU._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20131115/nsarguments-95)
[ 19.389556] ACPI Warning: \_SB_.PCI0.P0P2.GFX0._DSM: Argument #4 type mismatch - Found [Integer], ACPI requires [Package] (20131115/nsarguments-95)
[ 19.389564] ACPI Warning: \_SB_.PCI0.P0P2.GFX0._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20131115/nsarguments-95)
[ 19.389606] nouveau 0000:01:00.0: enabling device (0006 -> 0007)
[ 19.390013] nouveau [ DEVICE][0000:01:00.0] BOOT0 : 0x0e7290a2
[ 19.390014] nouveau [ DEVICE][0000:01:00.0] Chipset: GK107 (NVE7)
[ 19.390015] nouveau [ DEVICE][0000:01:00.0] Family : NVE0
[ 19.392102] nouveau [ VBIOS][0000:01:00.0] checking PRAMIN for image...
[ 19.486206] nouveau [ VBIOS][0000:01:00.0] ... appears to be valid
[ 19.486206] nouveau [ VBIOS][0000:01:00.0] using image from PRAMIN
[ 19.486324] nouveau [ VBIOS][0000:01:00.0] BIT signature found
[ 19.486326] nouveau [ VBIOS][0000:01:00.0] version 80.07.bf.00.02
[ 19.486557] nouveau 0000:01:00.0: irq 53 for MSI/MSI-X
[ 19.486566] nouveau [ PMC][0000:01:00.0] MSI interrupts enabled
[ 19.486603] nouveau [ PFB][0000:01:00.0] RAM type: GDDR5
[ 19.486604] nouveau [ PFB][0000:01:00.0] RAM size: 2048 MiB
[ 19.486604] nouveau [ PFB][0000:01:00.0] ZCOMP: 0 tags
[ 19.518383] nouveau [ PTHERM][0000:01:00.0] FAN control: none / external
[ 19.518386] nouveau [ PTHERM][0000:01:00.0] fan management: automatic
[ 19.518390] nouveau [ PTHERM][0000:01:00.0] internal sensor: yes
[ 19.518420] nouveau [ CLK][0000:01:00.0] 07: core 270-405 MHz memory 419 MHz
[ 19.518463] nouveau [ CLK][0000:01:00.0] 0a: core 270-925 MHz memory 780 MHz
[ 19.518493] nouveau [ CLK][0000:01:00.0] 0e: core 270-925 MHz memory 2000 MHz
[ 19.518512] nouveau [ CLK][0000:01:00.0] 0f: core 270-925 MHz memory 2508 MHz
[ 19.518658] nouveau [ CLK][0000:01:00.0] --: core 405 MHz memory 340 MHz
[ 19.553230] vga_switcheroo: enabled
[ 19.553364] [TTM] Zone kernel: Available graphics memory: 8194340 kiB
[ 19.553365] [TTM] Zone dma32: Available graphics memory: 2097152 kiB
[ 19.553365] [TTM] Initializing pool allocator
[ 19.553367] [TTM] Initializing DMA pool allocator
[ 19.553370] nouveau [ DRM] VRAM: 2048 MiB
[ 19.553371] nouveau [ DRM] GART: 1048576 MiB
[ 19.553372] nouveau [ DRM] Pointer to BIT loadval table invalid
[ 19.553373] nouveau [ DRM] TMDS table version 2.0
[ 19.553374] nouveau [ DRM] DCB version 4.0
[ 19.553384] nouveau [ DRM] DCB outp 00: 04810fb6 0f230010
[ 19.553385] nouveau [ DRM] DCB outp 01: 01821fd6 0f420020
[ 19.553385] nouveau [ DRM] DCB outp 02: 01021f12 00020020
[ 19.553386] nouveau [ DRM] DCB outp 03: 08832fc6 0f420010
[ 19.553387] nouveau [ DRM] DCB outp 04: 08032f02 00020010
[ 19.553387] nouveau [ DRM] DCB outp 05: 02843f62 00020010
[ 19.553388] nouveau [ DRM] DCB conn 00: 00020047
[ 19.553389] nouveau [ DRM] DCB conn 01: 02208146
[ 19.553390] nouveau [ DRM] DCB conn 02: 01104246
[ 19.553390] nouveau [ DRM] DCB conn 03: 00410361
[ 19.554503] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
[ 19.554503] [drm] No driver support for vblank timestamp query.
[ 19.566774] nouveau [ DRM] MM: using COPY for buffer copies
[ 19.566778] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:17:eDP-2]
[ 19.595226] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:17:eDP-2] disconnected
[ 19.595227] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:19:DP-1]
[ 19.597528] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:19:DP-1] disconnected
[ 19.597529] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:22:DP-2]
[ 19.610024] nouveau [ DRM] display: 4x270000 dpcd 0x11
[ 19.610025] nouveau [ DRM] encoder: 4x270000
[ 19.610026] nouveau [ DRM] maximum: 4x270000
[ 19.610032] nouveau [ DRM] native mode from preferred
[ 19.610035] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:22:DP-2] probed modes :
[ 19.610036] [drm:drm_mode_debug_printmodeline], Modeline 28:"1920x1080" 60 148500 1920 2008 2052 2200 1080 1084 1089 1125 0x48 0x5
[ 19.610037] [drm:drm_mode_debug_printmodeline], Modeline 35:"1280x1024" 75 135000 1280 1296 1440 1688 1024 1025 1028 1066 0x40 0x5
[ 19.610039] [drm:drm_mode_debug_printmodeline], Modeline 30:"1280x1024" 60 108000 1280 1328 1440 1688 1024 1025 1028 1066 0x40 0x5
[ 19.610040] [drm:drm_mode_debug_printmodeline], Modeline 29:"1152x864" 75 108000 1152 1216 1344 1600 864 865 868 900 0x40 0x5
[ 19.610041] [drm:drm_mode_debug_printmodeline], Modeline 36:"1024x768" 75 78800 1024 1040 1136 1312 768 769 772 800 0x40 0x5
[ 19.610042] [drm:drm_mode_debug_printmodeline], Modeline 37:"1024x768" 60 65000 1024 1048 1184 1344 768 771 777 806 0x40 0xa
[ 19.610043] [drm:drm_mode_debug_printmodeline], Modeline 38:"800x600" 75 49500 800 816 896 1056 600 601 604 625 0x40 0x5
[ 19.610044] [drm:drm_mode_debug_printmodeline], Modeline 31:"800x600" 60 40000 800 840 968 1056 600 601 605 628 0x40 0x5
[ 19.610045] [drm:drm_mode_debug_printmodeline], Modeline 32:"640x480" 75 31500 640 656 720 840 480 481 484 500 0x40 0xa
[ 19.610046] [drm:drm_mode_debug_printmodeline], Modeline 33:"640x480" 60 25200 640 656 752 800 480 490 492 525 0x40 0xa
[ 19.610047] [drm:drm_mode_debug_printmodeline], Modeline 34:"720x400" 70 28320 720 738 846 900 400 412 414 449 0x40 0x6
[ 19.610049] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:25:HDMI-A-1]
[ 19.611338] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:25:HDMI-A-1] disconnected
[ 19.611339] [drm:drm_setup_crtcs],
[ 19.611340] [drm:drm_enable_connectors], connector 17 enabled? no
[ 19.611340] [drm:drm_enable_connectors], connector 19 enabled? no
[ 19.611341] [drm:drm_enable_connectors], connector 22 enabled? yes
[ 19.611341] [drm:drm_enable_connectors], connector 25 enabled? no
[ 19.611342] [drm:drm_target_preferred], looking for cmdline mode on connector 22
[ 19.611343] [drm:drm_target_preferred], looking for preferred mode on connector 22
[ 19.611343] [drm:drm_target_preferred], found mode 1920x1080
[ 19.611344] [drm:drm_setup_crtcs], picking CRTCs for 8192x8192 config
[ 19.611345] [drm:drm_setup_crtcs], desired mode 1920x1080 set on crtc 13
[ 19.648619] nouveau [ DRM] allocated 1920x1080 fb: 0x80000, bo ffff880467af4800
[ 19.648662] nouveau 0000:01:00.0: fb1: nouveaufb frame buffer device
[ 19.648666] [drm:nouveau_pmops_runtime_idle], failing to power off - not optimus
[ 19.648669] [drm] Initialized nouveau 1.1.1 20120801 for 0000:01:00.0 on minor 1
[ 19.648673] [drm:nouveau_pmops_runtime_idle], failing to power off - not optimus
[ 25.497852] hda-intel 0000:01:00.1: Disabling via VGA-switcheroo
[ 25.607980] VGA switcheroo: switched nouveau off
[ 25.607986] nouveau [ DRM] suspending display...
[ 25.608006] nouveau [ DRM] unpinning framebuffer(s)...
[ 25.608089] nouveau [ DRM] evicting buffers...
[ 25.610740] nouveau [ DRM] waiting for kernel channels to go idle...
[ 25.610755] nouveau [ DRM] suspending client object trees...
[ 25.616371] nouveau [ DRM] suspending kernel object tree...
[-- Attachment #3: Type: text/plain, Size: 159 bytes --]
_______________________________________________
Intel-gfx mailing list
Intel-gfx@lists.freedesktop.org
http://lists.freedesktop.org/mailman/listinfo/intel-gfx
next prev parent reply other threads:[~2014-01-08 14:52 UTC|newest]
Thread overview: 7+ messages / expand[flat|nested] mbox.gz Atom feed top
2014-01-05 23:20 Help to enable Iris Pro on Retina MBP 11.3 Lu, Ran
2014-01-07 8:02 ` Jani Nikula
2014-01-07 21:14 ` Lu, Ran
2014-01-08 9:12 ` Jani Nikula
2014-01-08 9:18 ` Dave Airlie
2014-01-08 14:53 ` Lu, Ran [this message]
2014-01-08 13:46 ` Steven Newbury
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=4981713.dJOCYugK6C@rmbp \
--to=hephooey@gmail.com \
--cc=intel-gfx@lists.freedesktop.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.