Re: Terratec Cinergy C PCI - Mantis Driver

["Marius Räsener" <mr@softronic-mannheim.de>]

Hi again,

i tried older version now from the driver without success.

i tried     sudo rmmod mantis.ko  ... or with mantis_core.ko
"Module mantis does not exist in /proc/modules" on both modules

i really have no idea what to do ... i also looked at the driver sources 
... but thats far to advance for me right now ... i mean there a really 
much lines of code :)

greetings
marius

Am 30.01.2009 16:55, schrieb Manu Abraham:
> Marius Räsener wrote:
>    
>> Hi V4L-List,
>>
>> i hope i can find a solution with your help here.
>> The situation:
>> Hp ProLiant DL380 G2 Server should become a LinuxMCE Core (got that cheap).
>> LinuxMCE is based on Kubuntu 7.10 (i386 in my case)
>> I think the components of the System arent relevant, but correct my
>> please if not.
>> Maybe that there are only PCI-X slots available, but all Cards I use are
>> 3.3V compatible (with the 2 notch).
>>
>> DVB-C Card is "Terratec Cingery C PCI HD".
>>
>> I installed the card via this method:
>>
>> cd /usr/src
>> sudo apt-get install mercurial
>> sudo hg clone http://jusst.de/hg/mantis cd mantis
>> sudo make
>> sudo make install
>> sudo reboot
>>
>>
>> this worked for me several times.
>> (
>> i got the expected dmesg output:
>> [  101.667604] found a VP-2040 PCI DVB-C device on (0a:01.0),
>> [  101.670427] DVB: registering new adapter (Mantis dvb adapter)
>> [  102.189326] mantis_frontend_init (0): Probing for CU1216 (DVB-C)
>> [  102.192819] mantis_frontend_init (0): found Philips CU1216 DVB-C
>> frontend (TDA10023) @ 0x0c
>> [  102.192823] mantis_frontend_init (0): Mantis DVB-C Philips CU1216
>> frontend attach success
>> [  102.192829] DVB: registering adapter 0 frontend 0 (Philips TDA10023
>> DVB-C)...
>> )
>> but after the last complete new-installation its not anymore.
>> (
>> now die dmesg output:
>> ~: dmesg | grep -i dvb
>> ~:
>> )
>> i'm not sure what to try next. the card itself installs in Vista x64
>> without any errors so its no hardware defect i guess.
>> i also tried to install a older version of the mantis driver, but i'm
>> not sure if i downloaded them correctly.
>> i'm also not sure if i can reinstall older or newer versions of the
>> driver without messing something up. does that work?
>> i also tried several different pci-x slots caused that procedure
>> sometimes helped me in windows environment...
>>
>> any hints please for me before i jump from a bridge or something :)
>>      
>
> Please load the mantis_core.ko module before you load the mantis.ko
> module.
>
> Regards,
> Manu
>    

--
video4linux-list mailing list
Unsubscribe mailto:video4linux-list-request@redhat.com?subject=unsubscribe
https://www.redhat.com/mailman/listinfo/video4linux-list