All of lore.kernel.org
 help / color / mirror / Atom feed
From: Jeremy Fitzhardinge <jeremy@goop.org>
To: Greg Harris <greg.harris@metacarta.com>,
	"Christopher S. Aker" <caker@theshore.net>
Cc: Xen-devel <xen-devel@lists.xensource.com>,
	Jens Axboe <jens.axboe@oracle.com>,
	Linux Kernel Mailing List <linux-kernel@vger.kernel.org>
Subject: [TEST PATCH] xen/blkfront: use blk_rq_map_sg to generate ring entries
Date: Wed, 04 Feb 2009 11:55:49 -0800	[thread overview]
Message-ID: <4989F2C5.6060405@goop.org> (raw)

From: Jens Axboe <jens.axboe@oracle.com>

On occasion, the request will apparently have more segments than we
fit into the ring. Jens says:

> The second problem is that the block layer then appears to create one
> too many segments, but from the dump it has rq->nr_phys_segments ==
> BLKIF_MAX_SEGMENTS_PER_REQUEST. I suspect the latter is due to
> xen-blkfront not handling the merging on its own. It should check that
> the new page doesn't form part of the previous page. The
> rq_for_each_segment() iterates all single bits in the request, not dma
> segments. The "easiest" way to do this is to call blk_rq_map_sg() and
> then iterate the mapped sg list. That will give you what you are
> looking for.

> Here's a test patch, compiles but otherwise untested. I spent more
> time figuring out how to enable XEN than to code it up, so YMMV!
> Probably the sg list wants to be put inside the ring and only
> initialized on allocation, then you can get rid of the sg on stack and
> sg_init_table() loop call in the function. I'll leave that, and the
> testing, to you.

[Moved sg array into info structure, and initialize once. -J]

Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
Signed-off-by: Jeremy Fitzhardinge <jeremy.fitzhardinge@citrix.com>
---
 drivers/block/xen-blkfront.c |   30 +++++++++++++++---------------
 1 file changed, 15 insertions(+), 15 deletions(-)

===================================================================
--- a/drivers/block/xen-blkfront.c
+++ b/drivers/block/xen-blkfront.c
@@ -40,6 +40,7 @@
 #include <linux/hdreg.h>
 #include <linux/cdrom.h>
 #include <linux/module.h>
+#include <linux/scatterlist.h>
 
 #include <xen/xenbus.h>
 #include <xen/grant_table.h>
@@ -82,6 +83,7 @@
 	enum blkif_state connected;
 	int ring_ref;
 	struct blkif_front_ring ring;
+	struct scatterlist sg[BLKIF_MAX_SEGMENTS_PER_REQUEST];
 	unsigned int evtchn, irq;
 	struct request_queue *rq;
 	struct work_struct work;
@@ -204,12 +206,11 @@
 	struct blkfront_info *info = req->rq_disk->private_data;
 	unsigned long buffer_mfn;
 	struct blkif_request *ring_req;
-	struct req_iterator iter;
-	struct bio_vec *bvec;
 	unsigned long id;
 	unsigned int fsect, lsect;
-	int ref;
+	int i, ref;
 	grant_ref_t gref_head;
+	struct scatterlist *sg;
 
 	if (unlikely(info->connected != BLKIF_STATE_CONNECTED))
 		return 1;
@@ -238,12 +239,13 @@
 	if (blk_barrier_rq(req))
 		ring_req->operation = BLKIF_OP_WRITE_BARRIER;
 
-	ring_req->nr_segments = 0;
-	rq_for_each_segment(bvec, req, iter) {
-		BUG_ON(ring_req->nr_segments == BLKIF_MAX_SEGMENTS_PER_REQUEST);
-		buffer_mfn = pfn_to_mfn(page_to_pfn(bvec->bv_page));
-		fsect = bvec->bv_offset >> 9;
-		lsect = fsect + (bvec->bv_len >> 9) - 1;
+	ring_req->nr_segments = blk_rq_map_sg(req->q, req, info->sg);
+	BUG_ON(ring_req->nr_segments > BLKIF_MAX_SEGMENTS_PER_REQUEST);
+
+	for_each_sg(info->sg, sg, ring_req->nr_segments, i) {
+		buffer_mfn = pfn_to_mfn(page_to_pfn(sg_page(sg)));
+		fsect = sg->offset >> 9;
+		lsect = fsect + (sg->length >> 9) - 1;
 		/* install a grant reference. */
 		ref = gnttab_claim_grant_reference(&gref_head);
 		BUG_ON(ref == -ENOSPC);
@@ -254,16 +256,12 @@
 				buffer_mfn,
 				rq_data_dir(req) );
 
-		info->shadow[id].frame[ring_req->nr_segments] =
-				mfn_to_pfn(buffer_mfn);
-
-		ring_req->seg[ring_req->nr_segments] =
+		info->shadow[id].frame[i] = mfn_to_pfn(buffer_mfn);
+		ring_req->seg[i] =
 				(struct blkif_request_segment) {
 					.gref       = ref,
 					.first_sect = fsect,
 					.last_sect  = lsect };
-
-		ring_req->nr_segments++;
 	}
 
 	info->ring.req_prod_pvt++;
@@ -622,6 +620,8 @@
 	SHARED_RING_INIT(sring);
 	FRONT_RING_INIT(&info->ring, sring, PAGE_SIZE);
 
+	sg_init_table(info->sg, BLKIF_MAX_SEGMENTS_PER_REQUEST);
+
 	err = xenbus_grant_ring(dev, virt_to_mfn(info->ring.sring));
 	if (err < 0) {
 		free_page((unsigned long)sring);



WARNING: multiple messages have this Message-ID (diff)
From: Jeremy Fitzhardinge <jeremy@goop.org>
To: Greg Harris <greg.harris@metacarta.com>,
	"Christopher S. Aker" <caker@theshore.net>
Cc: Xen-devel <xen-devel@lists.xensource.com>,
	Linux Kernel Mailing List <linux-kernel@vger.kernel.org>,
	Jens Axboe <jens.axboe@oracle.com>
Subject: [TEST PATCH] xen/blkfront: use blk_rq_map_sg to generate ring entries
Date: Wed, 04 Feb 2009 11:55:49 -0800	[thread overview]
Message-ID: <4989F2C5.6060405@goop.org> (raw)

From: Jens Axboe <jens.axboe@oracle.com>

On occasion, the request will apparently have more segments than we
fit into the ring. Jens says:

> The second problem is that the block layer then appears to create one
> too many segments, but from the dump it has rq->nr_phys_segments ==
> BLKIF_MAX_SEGMENTS_PER_REQUEST. I suspect the latter is due to
> xen-blkfront not handling the merging on its own. It should check that
> the new page doesn't form part of the previous page. The
> rq_for_each_segment() iterates all single bits in the request, not dma
> segments. The "easiest" way to do this is to call blk_rq_map_sg() and
> then iterate the mapped sg list. That will give you what you are
> looking for.

> Here's a test patch, compiles but otherwise untested. I spent more
> time figuring out how to enable XEN than to code it up, so YMMV!
> Probably the sg list wants to be put inside the ring and only
> initialized on allocation, then you can get rid of the sg on stack and
> sg_init_table() loop call in the function. I'll leave that, and the
> testing, to you.

[Moved sg array into info structure, and initialize once. -J]

Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
Signed-off-by: Jeremy Fitzhardinge <jeremy.fitzhardinge@citrix.com>
---
 drivers/block/xen-blkfront.c |   30 +++++++++++++++---------------
 1 file changed, 15 insertions(+), 15 deletions(-)

===================================================================
--- a/drivers/block/xen-blkfront.c
+++ b/drivers/block/xen-blkfront.c
@@ -40,6 +40,7 @@
 #include <linux/hdreg.h>
 #include <linux/cdrom.h>
 #include <linux/module.h>
+#include <linux/scatterlist.h>
 
 #include <xen/xenbus.h>
 #include <xen/grant_table.h>
@@ -82,6 +83,7 @@
 	enum blkif_state connected;
 	int ring_ref;
 	struct blkif_front_ring ring;
+	struct scatterlist sg[BLKIF_MAX_SEGMENTS_PER_REQUEST];
 	unsigned int evtchn, irq;
 	struct request_queue *rq;
 	struct work_struct work;
@@ -204,12 +206,11 @@
 	struct blkfront_info *info = req->rq_disk->private_data;
 	unsigned long buffer_mfn;
 	struct blkif_request *ring_req;
-	struct req_iterator iter;
-	struct bio_vec *bvec;
 	unsigned long id;
 	unsigned int fsect, lsect;
-	int ref;
+	int i, ref;
 	grant_ref_t gref_head;
+	struct scatterlist *sg;
 
 	if (unlikely(info->connected != BLKIF_STATE_CONNECTED))
 		return 1;
@@ -238,12 +239,13 @@
 	if (blk_barrier_rq(req))
 		ring_req->operation = BLKIF_OP_WRITE_BARRIER;
 
-	ring_req->nr_segments = 0;
-	rq_for_each_segment(bvec, req, iter) {
-		BUG_ON(ring_req->nr_segments == BLKIF_MAX_SEGMENTS_PER_REQUEST);
-		buffer_mfn = pfn_to_mfn(page_to_pfn(bvec->bv_page));
-		fsect = bvec->bv_offset >> 9;
-		lsect = fsect + (bvec->bv_len >> 9) - 1;
+	ring_req->nr_segments = blk_rq_map_sg(req->q, req, info->sg);
+	BUG_ON(ring_req->nr_segments > BLKIF_MAX_SEGMENTS_PER_REQUEST);
+
+	for_each_sg(info->sg, sg, ring_req->nr_segments, i) {
+		buffer_mfn = pfn_to_mfn(page_to_pfn(sg_page(sg)));
+		fsect = sg->offset >> 9;
+		lsect = fsect + (sg->length >> 9) - 1;
 		/* install a grant reference. */
 		ref = gnttab_claim_grant_reference(&gref_head);
 		BUG_ON(ref == -ENOSPC);
@@ -254,16 +256,12 @@
 				buffer_mfn,
 				rq_data_dir(req) );
 
-		info->shadow[id].frame[ring_req->nr_segments] =
-				mfn_to_pfn(buffer_mfn);
-
-		ring_req->seg[ring_req->nr_segments] =
+		info->shadow[id].frame[i] = mfn_to_pfn(buffer_mfn);
+		ring_req->seg[i] =
 				(struct blkif_request_segment) {
 					.gref       = ref,
 					.first_sect = fsect,
 					.last_sect  = lsect };
-
-		ring_req->nr_segments++;
 	}
 
 	info->ring.req_prod_pvt++;
@@ -622,6 +620,8 @@
 	SHARED_RING_INIT(sring);
 	FRONT_RING_INIT(&info->ring, sring, PAGE_SIZE);
 
+	sg_init_table(info->sg, BLKIF_MAX_SEGMENTS_PER_REQUEST);
+
 	err = xenbus_grant_ring(dev, virt_to_mfn(info->ring.sring));
 	if (err < 0) {
 		free_page((unsigned long)sring);

             reply	other threads:[~2009-02-04 19:56 UTC|newest]

Thread overview: 4+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2009-02-04 19:55 Jeremy Fitzhardinge [this message]
2009-02-04 19:55 ` [TEST PATCH] xen/blkfront: use blk_rq_map_sg to generate ring entries Jeremy Fitzhardinge
     [not found] <13313891.8411201233953050380.JavaMail.root@ouachita>
2009-02-06 20:47 ` Greg Harris
2009-02-06 21:16   ` Jeremy Fitzhardinge

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=4989F2C5.6060405@goop.org \
    --to=jeremy@goop.org \
    --cc=caker@theshore.net \
    --cc=greg.harris@metacarta.com \
    --cc=jens.axboe@oracle.com \
    --cc=linux-kernel@vger.kernel.org \
    --cc=xen-devel@lists.xensource.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.