All of lore.kernel.org
 help / color / mirror / Atom feed
From: Kenji Kaneshige <kaneshige.kenji@jp.fujitsu.com>
To: Krishna Kothapalli <krishna_sunitha@hotmail.com>
Cc: ebiederm@xmission.com, linux-pci@vger.kernel.org,
	jbarnes@virtuousgeek.org, achiang@hp.com, djwong@us.ibm.com,
	xyzzy@speakeasy.org, linux-kernel@vger.kernel.org
Subject: Re: Q: state of pci express hotplug
Date: Thu, 05 Feb 2009 09:02:24 +0900	[thread overview]
Message-ID: <498A2C90.2000208@jp.fujitsu.com> (raw)
In-Reply-To: <BAY111-W205B70ED6B226F2F9D8E2088C30@phx.gbl>


>> o Details about the steps to reproduce the problem.
> 
>   - boot the box with 2.6.28.3
>   -   # /sbin/modprobe pciehp pciehp_debug
>   - lspci 
>   - Insert the PCI express card on the hot swap slot and wait for 2 mins
>   - lspci <-- this does not show the PCI express device 
>   (The same device shows up in lspci and sysfs during cold boot ) 

Could you try below after inserting the device?

With pciehp:

	# echo 1 > /sys/bus/pci/slots/96/power

With acpiphp:

	# echo 1 > /sys/bus/pci/slots/2/power

Thanks,
Kenji Kaneshige



  parent reply	other threads:[~2009-02-05  0:02 UTC|newest]

Thread overview: 16+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2009-01-31  7:01 Q: state of pci express hotplug Eric W. Biederman
2009-01-31 18:13 ` Rafael J. Wysocki
2009-02-02  2:19 ` Kenji Kaneshige
2009-02-02 17:15   ` Krishna Kothapalli
2009-02-03  0:51     ` Kenji Kaneshige
2009-02-03 20:48       ` Krishna Kothapalli
2009-02-04  2:32         ` Krishna Kothapalli
2009-02-04  5:51           ` Kenji Kaneshige
2009-02-04 18:17             ` Krishna Kothapalli
2009-02-04 19:40               ` Mark Lord
2009-02-04 23:49               ` Alex Chiang
2009-02-05  0:02               ` Kenji Kaneshige [this message]
2009-02-05  1:53                 ` Krishna Kothapalli
2009-02-05  6:42                   ` Kenji Kaneshige
2009-02-06 20:37                     ` Krishna Kothapalli
2009-02-02 17:01 ` Alex Chiang

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=498A2C90.2000208@jp.fujitsu.com \
    --to=kaneshige.kenji@jp.fujitsu.com \
    --cc=achiang@hp.com \
    --cc=djwong@us.ibm.com \
    --cc=ebiederm@xmission.com \
    --cc=jbarnes@virtuousgeek.org \
    --cc=krishna_sunitha@hotmail.com \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-pci@vger.kernel.org \
    --cc=xyzzy@speakeasy.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body. 
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.