From: Anatolij Gustschin <agust@denx.de>
To: u-boot@lists.denx.de
Subject: [U-Boot] [PATCH 2/9 v2] i.MX31: add a simple gpio driver
Date: Thu, 05 Feb 2009 15:50:23 +0100 [thread overview]
Message-ID: <498AFCAF.1040905@denx.de> (raw)
In-Reply-To: <Pine.LNX.4.64.0902051257540.5553@axis700.grange>
Hi Guennadi,
Guennadi Liakhovetski wrote:
> diff --git a/drivers/gpio/mx31_gpio.c b/drivers/gpio/mx31_gpio.c
> new file mode 100644
> index 0000000..6487e63
> --- /dev/null
> +++ b/drivers/gpio/mx31_gpio.c
<snip>
> +#include <common.h>
> +#include <asm/arch/mx31.h>
> +#include <asm/arch/mx31-regs.h>
> +
> +/* GPIO port description */
> +static unsigned long gpio_ports[] = {
> + [0] = 0x53fcc000,
> + [1] = 0x53fd0000,
> + [2] = 0x53fa4000,
> +};
Ilya send a patch for mx31 GPIO register definitions today
http://lists.denx.de/pipermail/u-boot/2009-February/046884.html
Could you please provide additional patch for drivers/gpio/mx31_gpio.c
based on Ilya's patch to use these GPIOx_BASE macros here and to
use GPIO_DR / GPIO_GDIR for 0 / 4 below? Thanks!
> +void mx31_gpio_set(unsigned int gpio, unsigned int value)
> +{
> + unsigned int port = gpio >> 5;
> + u32 l;
> +
> + if (port > sizeof(gpio_ports) / sizeof(gpio_ports[0]) - 1)
also please change this one to
if (port >= ARRAY_SIZE(gpio_ports))
too, to be consistent with coding in this file, Thanks!
> + return;
> +
> + gpio &= 0x1f;
> +
> + l = __REG(gpio_ports[port] + 0);
> + if (value)
> + l |= 1 << gpio;
> + else
> + l &= ~(1 << gpio);
> + __REG(gpio_ports[port] + 0) = l;
> +}
> diff --git a/include/asm-arm/arch-mx31/mx31.h b/include/asm-arm/arch-mx31/mx31.h
> index 0552c27..e957d72 100644
> --- a/include/asm-arm/arch-mx31/mx31.h
> +++ b/include/asm-arm/arch-mx31/mx31.h
> @@ -27,4 +27,24 @@
> extern u32 mx31_get_ipg_clk(void);
> extern void mx31_gpio_mux(unsigned long mode);
>
> +enum mx31_gpio_direction {
> + MX31_GPIO_DIRECTION_IN,
> + MX31_GPIO_DIRECTION_OUT,
> +};
> +
> +#ifdef CONFIG_MX31_GPIO
> +extern int mx31_gpio_direction(unsigned int gpio,
> + enum mx31_gpio_direction direction);
________________________^^^^^^^
please remove spaces here, Thanks!
> +extern void mx31_gpio_set(unsigned int gpio, unsigned int value);
> +#else
> +static inline int mx31_gpio_direction(unsigned int gpio,
> + enum mx31_gpio_direction direction)
________________________^^^^^^^
please remove spaces here too, Thanks!
Best regards,
Anatolij
next prev parent reply other threads:[~2009-02-05 14:50 UTC|newest]
Thread overview: 108+ messages / expand[flat|nested] mbox.gz Atom feed top
2009-02-04 16:59 [U-Boot] [PATCH 0/9] ARM: Support for splashimage om i.MX31-based phycore "eet" variant Guennadi Liakhovetski
2009-02-04 16:59 ` [U-Boot] [PATCH 1/9] i.MX31: fix SPI driver for shorter than 32 bit transfers Guennadi Liakhovetski
2009-02-04 21:30 ` Wolfgang Denk
2009-02-04 21:42 ` Scott Wood
2009-02-04 22:00 ` Wolfgang Denk
2009-02-05 6:13 ` [U-Boot] MPC8548_eTSEC to Marvell 88E1145 E0 version Phy Initialization Ajeesh Kumar
2009-02-04 22:39 ` [U-Boot] [PATCH 1/9] i.MX31: fix SPI driver for shorter than 32 bit transfers Jean-Christophe PLAGNIOL-VILLARD
2009-02-05 1:31 ` Mike Frysinger
2009-02-05 8:28 ` Guennadi Liakhovetski
2009-02-05 15:34 ` Mike Frysinger
2009-02-04 16:59 ` [U-Boot] [PATCH 2/9] i.MX31: add a simple gpio driver Guennadi Liakhovetski
2009-02-04 18:54 ` Magnus Lilja
2009-02-04 19:54 ` Anatolij Gustschin
2009-02-04 20:41 ` Guennadi Liakhovetski
2009-02-04 22:44 ` Jean-Christophe PLAGNIOL-VILLARD
2009-02-04 16:59 ` [U-Boot] [PATCH 3/9] i.MX31: support GPIO as a chip-select in the mxc_spi driver Guennadi Liakhovetski
2009-02-04 20:28 ` Anatolij Gustschin
2009-02-04 20:40 ` Guennadi Liakhovetski
2009-02-04 21:34 ` Wolfgang Denk
2009-02-04 22:25 ` Jean-Christophe PLAGNIOL-VILLARD
2009-02-05 10:03 ` Guennadi Liakhovetski
2009-02-04 16:59 ` [U-Boot] [PATCH 4/9] A driver for the S6E63D6 SPI display controller from Samsung Guennadi Liakhovetski
2009-02-04 18:54 ` Magnus Lilja
2009-02-04 21:39 ` Wolfgang Denk
2009-02-04 21:38 ` Wolfgang Denk
2009-02-04 22:24 ` Guennadi Liakhovetski
2009-02-04 22:20 ` Anatolij Gustschin
2009-02-05 10:19 ` Guennadi Liakhovetski
2009-02-04 22:33 ` Jean-Christophe PLAGNIOL-VILLARD
2009-02-05 10:33 ` Guennadi Liakhovetski
2009-02-05 12:29 ` Wolfgang Denk
2009-02-04 16:59 ` [U-Boot] [PATCH 5/9] ARM: remove unused variable Guennadi Liakhovetski
2009-02-04 21:33 ` Jean-Christophe PLAGNIOL-VILLARD
2009-02-04 22:20 ` Guennadi Liakhovetski
2009-02-04 22:30 ` Jean-Christophe PLAGNIOL-VILLARD
2009-02-04 17:00 ` [U-Boot] [PATCH 6/9] Add 16bpp BMP support Guennadi Liakhovetski
2009-02-04 22:01 ` Wolfgang Denk
2009-02-04 22:07 ` Guennadi Liakhovetski
2009-02-04 22:36 ` Jean-Christophe PLAGNIOL-VILLARD
2009-02-04 22:46 ` Anatolij Gustschin
2009-02-04 23:02 ` Anatolij Gustschin
2009-02-04 17:00 ` [U-Boot] [PATCH 7/9] LCD: support 8bpp BMPs on 16bpp displays Guennadi Liakhovetski
2009-02-04 22:45 ` Jean-Christophe PLAGNIOL-VILLARD
2009-02-04 17:00 ` [U-Boot] [PATCH 8/9] video: add a i.MX31 framebuffer driver only for bitmaps so far Guennadi Liakhovetski
2009-02-04 18:54 ` Magnus Lilja
2009-02-04 19:39 ` Guennadi Liakhovetski
2009-02-04 20:22 ` Magnus Lilja
2009-02-04 21:20 ` Wolfgang Denk
2009-02-04 17:00 ` [U-Boot] [PATCH 9/9] ARM: add an "eet" variant of the imx31_phycore board Guennadi Liakhovetski
2009-02-04 21:30 ` Jean-Christophe PLAGNIOL-VILLARD
2009-02-04 22:17 ` Guennadi Liakhovetski
2009-02-04 22:18 ` Jean-Christophe PLAGNIOL-VILLARD
2009-02-04 22:22 ` Wolfgang Denk
2009-02-05 10:51 ` Guennadi Liakhovetski
2009-02-05 12:31 ` [U-Boot] [PATCH 0/9 v2] ARM: Support for splashimage om i.MX31-based phycore "eet" variant Guennadi Liakhovetski
2009-02-05 12:31 ` [U-Boot] [PATCH 1/9 v2] i.MX31: fix SPI driver for shorter than 32 bit transfers Guennadi Liakhovetski
2009-02-05 12:32 ` [U-Boot] [PATCH 2/9 v2] i.MX31: add a simple gpio driver Guennadi Liakhovetski
2009-02-05 14:50 ` Anatolij Gustschin [this message]
2009-02-05 15:24 ` Guennadi Liakhovetski
2009-02-05 16:07 ` Anatolij Gustschin
2009-02-05 12:32 ` [U-Boot] [PATCH 3/9 v2] i.MX31: support GPIO as a chip-select in the mxc_spi driver Guennadi Liakhovetski
2009-02-05 16:32 ` Anatolij Gustschin
2009-02-05 16:44 ` Guennadi Liakhovetski
2009-02-05 17:22 ` Anatolij Gustschin
2009-02-05 12:32 ` [U-Boot] [PATCH 4/9 v2] A driver for the S6E63D6 SPI display controller from Samsung Guennadi Liakhovetski
2009-02-05 16:42 ` Anatolij Gustschin
2009-02-05 16:46 ` Guennadi Liakhovetski
2009-02-06 0:19 ` Anatolij Gustschin
2009-02-05 12:32 ` [U-Boot] [PATCH 5/9 v2] ARM: remove unused variable Guennadi Liakhovetski
2009-02-05 12:32 ` [U-Boot] [PATCH 6/9 v2] Add 16bpp BMP support Guennadi Liakhovetski
2009-02-05 12:32 ` [U-Boot] [PATCH 7/9 v2] LCD: support 8bpp BMPs on 16bpp displays Guennadi Liakhovetski
2009-02-05 12:32 ` [U-Boot] [PATCH 8/9 v2] video: add a i.MX31 framebuffer driver Guennadi Liakhovetski
2009-02-06 0:27 ` Anatolij Gustschin
2009-02-05 12:32 ` [U-Boot] [PATCH 9/9 v2] ARM: add an "eet" variant of the imx31_phycore board Guennadi Liakhovetski
2009-02-06 0:52 ` Anatolij Gustschin
2009-02-06 9:37 ` [U-Boot] [PATCH 0/9 v3] ARM: Support for splashimage om i.MX31-based phycore "eet" variant Guennadi Liakhovetski
2009-02-06 9:37 ` [U-Boot] [PATCH 1/9 v3] i.MX31: fix SPI driver for shorter than 32 bit transfers Guennadi Liakhovetski
2009-02-06 21:28 ` Jean-Christophe PLAGNIOL-VILLARD
2009-02-06 9:37 ` [U-Boot] [PATCH 2/9 v3] i.MX31: add a simple gpio driver Guennadi Liakhovetski
2009-02-06 21:27 ` Jean-Christophe PLAGNIOL-VILLARD
2009-02-23 10:58 ` Anatolij Gustschin
2009-02-24 3:07 ` Jean-Christophe PLAGNIOL-VILLARD
2009-02-24 4:59 ` Jean-Christophe PLAGNIOL-VILLARD
2009-02-06 9:37 ` [U-Boot] [PATCH 3/9 v3] i.MX31: support GPIO as a chip-select in the mxc_spi driver Guennadi Liakhovetski
2009-02-06 21:25 ` Jean-Christophe PLAGNIOL-VILLARD
2009-02-06 9:37 ` [U-Boot] [PATCH 4/9 v3] A driver for the S6E63D6 SPI display controller from Samsung Guennadi Liakhovetski
2009-02-06 15:38 ` Anatolij Gustschin
2009-02-21 21:34 ` Wolfgang Denk
2009-02-23 13:13 ` Anatolij Gustschin
2009-02-23 21:39 ` Wolfgang Denk
2009-02-06 9:37 ` [U-Boot] [PATCH 5/9 v3] ARM: remove unused variable Guennadi Liakhovetski
2009-02-06 21:14 ` Jean-Christophe PLAGNIOL-VILLARD
2009-02-06 9:37 ` [U-Boot] [PATCH 6/9 v3] Add 16bpp BMP support Guennadi Liakhovetski
2009-02-06 15:42 ` Anatolij Gustschin
2009-02-06 9:37 ` [U-Boot] [PATCH 7/9 v3] LCD: support 8bpp BMPs on 16bpp displays Guennadi Liakhovetski
2009-02-06 16:14 ` Anatolij Gustschin
2009-02-06 16:23 ` Guennadi Liakhovetski
2009-02-06 9:37 ` [U-Boot] [PATCH 8/9 v3] video: add an i.MX31 framebuffer driver Guennadi Liakhovetski
2009-02-06 16:16 ` Anatolij Gustschin
2009-02-06 9:38 ` [U-Boot] [PATCH 9/9 v3] ARM: add an "eet" variant of the imx31_phycore board Guennadi Liakhovetski
2009-02-06 21:13 ` Jean-Christophe PLAGNIOL-VILLARD
2009-02-23 12:20 ` Anatolij Gustschin
2009-02-23 12:34 ` [U-Boot] [PATCH 9/9 v4] " Guennadi Liakhovetski
2009-02-24 5:00 ` Jean-Christophe PLAGNIOL-VILLARD
2009-02-24 13:51 ` Anatolij Gustschin
2009-02-06 17:25 ` [U-Boot] [PATCH 0/9 v3] ARM: Support for splashimage om i.MX31-based phycore "eet" variant Anatolij Gustschin
2009-02-06 17:34 ` Guennadi Liakhovetski
2009-02-06 22:05 ` Jean-Christophe PLAGNIOL-VILLARD
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=498AFCAF.1040905@denx.de \
--to=agust@denx.de \
--cc=u-boot@lists.denx.de \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.