From: Anatolij Gustschin <agust@denx.de>
To: u-boot@lists.denx.de
Subject: [U-Boot] [PATCH 4/9 v3] A driver for the S6E63D6 SPI display controller from Samsung
Date: Fri, 06 Feb 2009 16:38:19 +0100 [thread overview]
Message-ID: <498C596B.2030301@denx.de> (raw)
In-Reply-To: <Pine.LNX.4.64.0902061020470.4970@axis700.grange>
Guennadi Liakhovetski wrote:
> This is a driver for the S6E63D6 SPI OLED display controller from Samsung.
> It only provides access to controller's registers so the client can freely
> configure it.
>
> Signed-off-by: Guennadi Liakhovetski <lg@denx.de>
> ---
<snip>
> drivers/video/Makefile | 1 +
> drivers/video/s6e63d6.c | 76 +++++++++++++++++++++++++++++++++++++++++++++++
> include/s6e63d6.h | 37 +++++++++++++++++++++++
> 3 files changed, 114 insertions(+), 0 deletions(-)
> create mode 100644 drivers/video/s6e63d6.c
> create mode 100644 include/s6e63d6.h
Applied to u-boot-video/master.
Thanks,
Anatolij
next prev parent reply other threads:[~2009-02-06 15:38 UTC|newest]
Thread overview: 108+ messages / expand[flat|nested] mbox.gz Atom feed top
2009-02-04 16:59 [U-Boot] [PATCH 0/9] ARM: Support for splashimage om i.MX31-based phycore "eet" variant Guennadi Liakhovetski
2009-02-04 16:59 ` [U-Boot] [PATCH 1/9] i.MX31: fix SPI driver for shorter than 32 bit transfers Guennadi Liakhovetski
2009-02-04 21:30 ` Wolfgang Denk
2009-02-04 21:42 ` Scott Wood
2009-02-04 22:00 ` Wolfgang Denk
2009-02-05 6:13 ` [U-Boot] MPC8548_eTSEC to Marvell 88E1145 E0 version Phy Initialization Ajeesh Kumar
2009-02-04 22:39 ` [U-Boot] [PATCH 1/9] i.MX31: fix SPI driver for shorter than 32 bit transfers Jean-Christophe PLAGNIOL-VILLARD
2009-02-05 1:31 ` Mike Frysinger
2009-02-05 8:28 ` Guennadi Liakhovetski
2009-02-05 15:34 ` Mike Frysinger
2009-02-04 16:59 ` [U-Boot] [PATCH 2/9] i.MX31: add a simple gpio driver Guennadi Liakhovetski
2009-02-04 18:54 ` Magnus Lilja
2009-02-04 19:54 ` Anatolij Gustschin
2009-02-04 20:41 ` Guennadi Liakhovetski
2009-02-04 22:44 ` Jean-Christophe PLAGNIOL-VILLARD
2009-02-04 16:59 ` [U-Boot] [PATCH 3/9] i.MX31: support GPIO as a chip-select in the mxc_spi driver Guennadi Liakhovetski
2009-02-04 20:28 ` Anatolij Gustschin
2009-02-04 20:40 ` Guennadi Liakhovetski
2009-02-04 21:34 ` Wolfgang Denk
2009-02-04 22:25 ` Jean-Christophe PLAGNIOL-VILLARD
2009-02-05 10:03 ` Guennadi Liakhovetski
2009-02-04 16:59 ` [U-Boot] [PATCH 4/9] A driver for the S6E63D6 SPI display controller from Samsung Guennadi Liakhovetski
2009-02-04 18:54 ` Magnus Lilja
2009-02-04 21:39 ` Wolfgang Denk
2009-02-04 21:38 ` Wolfgang Denk
2009-02-04 22:24 ` Guennadi Liakhovetski
2009-02-04 22:20 ` Anatolij Gustschin
2009-02-05 10:19 ` Guennadi Liakhovetski
2009-02-04 22:33 ` Jean-Christophe PLAGNIOL-VILLARD
2009-02-05 10:33 ` Guennadi Liakhovetski
2009-02-05 12:29 ` Wolfgang Denk
2009-02-04 16:59 ` [U-Boot] [PATCH 5/9] ARM: remove unused variable Guennadi Liakhovetski
2009-02-04 21:33 ` Jean-Christophe PLAGNIOL-VILLARD
2009-02-04 22:20 ` Guennadi Liakhovetski
2009-02-04 22:30 ` Jean-Christophe PLAGNIOL-VILLARD
2009-02-04 17:00 ` [U-Boot] [PATCH 6/9] Add 16bpp BMP support Guennadi Liakhovetski
2009-02-04 22:01 ` Wolfgang Denk
2009-02-04 22:07 ` Guennadi Liakhovetski
2009-02-04 22:36 ` Jean-Christophe PLAGNIOL-VILLARD
2009-02-04 22:46 ` Anatolij Gustschin
2009-02-04 23:02 ` Anatolij Gustschin
2009-02-04 17:00 ` [U-Boot] [PATCH 7/9] LCD: support 8bpp BMPs on 16bpp displays Guennadi Liakhovetski
2009-02-04 22:45 ` Jean-Christophe PLAGNIOL-VILLARD
2009-02-04 17:00 ` [U-Boot] [PATCH 8/9] video: add a i.MX31 framebuffer driver only for bitmaps so far Guennadi Liakhovetski
2009-02-04 18:54 ` Magnus Lilja
2009-02-04 19:39 ` Guennadi Liakhovetski
2009-02-04 20:22 ` Magnus Lilja
2009-02-04 21:20 ` Wolfgang Denk
2009-02-04 17:00 ` [U-Boot] [PATCH 9/9] ARM: add an "eet" variant of the imx31_phycore board Guennadi Liakhovetski
2009-02-04 21:30 ` Jean-Christophe PLAGNIOL-VILLARD
2009-02-04 22:17 ` Guennadi Liakhovetski
2009-02-04 22:18 ` Jean-Christophe PLAGNIOL-VILLARD
2009-02-04 22:22 ` Wolfgang Denk
2009-02-05 10:51 ` Guennadi Liakhovetski
2009-02-05 12:31 ` [U-Boot] [PATCH 0/9 v2] ARM: Support for splashimage om i.MX31-based phycore "eet" variant Guennadi Liakhovetski
2009-02-05 12:31 ` [U-Boot] [PATCH 1/9 v2] i.MX31: fix SPI driver for shorter than 32 bit transfers Guennadi Liakhovetski
2009-02-05 12:32 ` [U-Boot] [PATCH 2/9 v2] i.MX31: add a simple gpio driver Guennadi Liakhovetski
2009-02-05 14:50 ` Anatolij Gustschin
2009-02-05 15:24 ` Guennadi Liakhovetski
2009-02-05 16:07 ` Anatolij Gustschin
2009-02-05 12:32 ` [U-Boot] [PATCH 3/9 v2] i.MX31: support GPIO as a chip-select in the mxc_spi driver Guennadi Liakhovetski
2009-02-05 16:32 ` Anatolij Gustschin
2009-02-05 16:44 ` Guennadi Liakhovetski
2009-02-05 17:22 ` Anatolij Gustschin
2009-02-05 12:32 ` [U-Boot] [PATCH 4/9 v2] A driver for the S6E63D6 SPI display controller from Samsung Guennadi Liakhovetski
2009-02-05 16:42 ` Anatolij Gustschin
2009-02-05 16:46 ` Guennadi Liakhovetski
2009-02-06 0:19 ` Anatolij Gustschin
2009-02-05 12:32 ` [U-Boot] [PATCH 5/9 v2] ARM: remove unused variable Guennadi Liakhovetski
2009-02-05 12:32 ` [U-Boot] [PATCH 6/9 v2] Add 16bpp BMP support Guennadi Liakhovetski
2009-02-05 12:32 ` [U-Boot] [PATCH 7/9 v2] LCD: support 8bpp BMPs on 16bpp displays Guennadi Liakhovetski
2009-02-05 12:32 ` [U-Boot] [PATCH 8/9 v2] video: add a i.MX31 framebuffer driver Guennadi Liakhovetski
2009-02-06 0:27 ` Anatolij Gustschin
2009-02-05 12:32 ` [U-Boot] [PATCH 9/9 v2] ARM: add an "eet" variant of the imx31_phycore board Guennadi Liakhovetski
2009-02-06 0:52 ` Anatolij Gustschin
2009-02-06 9:37 ` [U-Boot] [PATCH 0/9 v3] ARM: Support for splashimage om i.MX31-based phycore "eet" variant Guennadi Liakhovetski
2009-02-06 9:37 ` [U-Boot] [PATCH 1/9 v3] i.MX31: fix SPI driver for shorter than 32 bit transfers Guennadi Liakhovetski
2009-02-06 21:28 ` Jean-Christophe PLAGNIOL-VILLARD
2009-02-06 9:37 ` [U-Boot] [PATCH 2/9 v3] i.MX31: add a simple gpio driver Guennadi Liakhovetski
2009-02-06 21:27 ` Jean-Christophe PLAGNIOL-VILLARD
2009-02-23 10:58 ` Anatolij Gustschin
2009-02-24 3:07 ` Jean-Christophe PLAGNIOL-VILLARD
2009-02-24 4:59 ` Jean-Christophe PLAGNIOL-VILLARD
2009-02-06 9:37 ` [U-Boot] [PATCH 3/9 v3] i.MX31: support GPIO as a chip-select in the mxc_spi driver Guennadi Liakhovetski
2009-02-06 21:25 ` Jean-Christophe PLAGNIOL-VILLARD
2009-02-06 9:37 ` [U-Boot] [PATCH 4/9 v3] A driver for the S6E63D6 SPI display controller from Samsung Guennadi Liakhovetski
2009-02-06 15:38 ` Anatolij Gustschin [this message]
2009-02-21 21:34 ` Wolfgang Denk
2009-02-23 13:13 ` Anatolij Gustschin
2009-02-23 21:39 ` Wolfgang Denk
2009-02-06 9:37 ` [U-Boot] [PATCH 5/9 v3] ARM: remove unused variable Guennadi Liakhovetski
2009-02-06 21:14 ` Jean-Christophe PLAGNIOL-VILLARD
2009-02-06 9:37 ` [U-Boot] [PATCH 6/9 v3] Add 16bpp BMP support Guennadi Liakhovetski
2009-02-06 15:42 ` Anatolij Gustschin
2009-02-06 9:37 ` [U-Boot] [PATCH 7/9 v3] LCD: support 8bpp BMPs on 16bpp displays Guennadi Liakhovetski
2009-02-06 16:14 ` Anatolij Gustschin
2009-02-06 16:23 ` Guennadi Liakhovetski
2009-02-06 9:37 ` [U-Boot] [PATCH 8/9 v3] video: add an i.MX31 framebuffer driver Guennadi Liakhovetski
2009-02-06 16:16 ` Anatolij Gustschin
2009-02-06 9:38 ` [U-Boot] [PATCH 9/9 v3] ARM: add an "eet" variant of the imx31_phycore board Guennadi Liakhovetski
2009-02-06 21:13 ` Jean-Christophe PLAGNIOL-VILLARD
2009-02-23 12:20 ` Anatolij Gustschin
2009-02-23 12:34 ` [U-Boot] [PATCH 9/9 v4] " Guennadi Liakhovetski
2009-02-24 5:00 ` Jean-Christophe PLAGNIOL-VILLARD
2009-02-24 13:51 ` Anatolij Gustschin
2009-02-06 17:25 ` [U-Boot] [PATCH 0/9 v3] ARM: Support for splashimage om i.MX31-based phycore "eet" variant Anatolij Gustschin
2009-02-06 17:34 ` Guennadi Liakhovetski
2009-02-06 22:05 ` Jean-Christophe PLAGNIOL-VILLARD
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=498C596B.2030301@denx.de \
--to=agust@denx.de \
--cc=u-boot@lists.denx.de \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.