* b43: extreme latency on 2.6.28.3
@ 2009-02-10 22:20 John Daiker
0 siblings, 0 replies; only message in thread
From: John Daiker @ 2009-02-10 22:20 UTC (permalink / raw)
To: linux-wireless; +Cc: bcm43xx-dev
I have been having trouble with my b43 card for a bit, and wondered if
anyone could lend a hand.
Long story short... dropped connections and crazy-high latency when
initially connecting. I am fairly confident that it's not the router
(Netgear WGR614v9), as I have two other machines that don't see this
kind of high latency. (Windows laptop with an Intel 4965 and an Ubuntu
8.10 server with a Realtek rt2500pci).
Pinging from one box (192.168.1.204) to the problem box (192.168.1.210)
From 192.168.1.204 icmp_seq=37 Destination Host Unreachable
From 192.168.1.204 icmp_seq=38 Destination Host Unreachable
From 192.168.1.204 icmp_seq=39 Destination Host Unreachable
From 192.168.1.204 icmp_seq=51 Destination Host Unreachable
From 192.168.1.204 icmp_seq=52 Destination Host Unreachable
From 192.168.1.204 icmp_seq=53 Destination Host Unreachable
64 bytes from 192.168.1.210: icmp_seq=49 ttl=64 time=15307 ms
64 bytes from 192.168.1.210: icmp_seq=54 ttl=64 time=18607 ms
64 bytes from 192.168.1.210: icmp_seq=55 ttl=64 time=18285 ms
64 bytes from 192.168.1.210: icmp_seq=56 ttl=64 time=17696 ms
64 bytes from 192.168.1.210: icmp_seq=57 ttl=64 time=19030 ms
64 bytes from 192.168.1.210: icmp_seq=58 ttl=64 time=18239 ms
64 bytes from 192.168.1.210: icmp_seq=59 ttl=64 time=17332 ms
(Un)fortunately, this high latency disappeared over the course of
writing this e-mail... so the mystery deepens.
I'm wondering what could cause this, and more importantly, how I can
help to debug it. I've researched how to increase mac80211 and/or b43
debug verbosity, but can't find much documented in-kernel or on
linuxwireless.org
dmesg, kernel config, and lspci -vvv output included.
For further reference, should I inline-include the following, or use
attachments?
Thanks,
John Daiker
dmesg
[ 0.000000] BIOS EBDA/lowmem at: 0009f800/0009f800
[ 0.000000] Linux version 2.6.28.3-090210-1343 (root@jdm6) (gcc
version 4.3.2 (Ubuntu 4.3.2-1ubuntu12) ) #1 SMP Tue Feb 10 13:49:08 PST 2009
[ 0.000000] Command line:
root=UUID=d0d52b48-db63-4fd7-bb7a-4af5119d2017 ro printk.time=1
initcall_debug
[ 0.000000] KERNEL supported cpus:
[ 0.000000] Intel GenuineIntel
[ 0.000000] AMD AuthenticAMD
[ 0.000000] Centaur CentaurHauls
[ 0.000000] BIOS-provided physical RAM map:
[ 0.000000] BIOS-e820: 0000000000000000 - 000000000009f800 (usable)
[ 0.000000] BIOS-e820: 000000000009f800 - 00000000000a0000 (reserved)
[ 0.000000] BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved)
[ 0.000000] BIOS-e820: 0000000000100000 - 00000000cfee0000 (usable)
[ 0.000000] BIOS-e820: 00000000cfee0000 - 00000000cfee3000 (ACPI NVS)
[ 0.000000] BIOS-e820: 00000000cfee3000 - 00000000cfef0000 (ACPI data)
[ 0.000000] BIOS-e820: 00000000cfef0000 - 00000000cff00000 (reserved)
[ 0.000000] BIOS-e820: 00000000d0000000 - 00000000e0000000 (reserved)
[ 0.000000] BIOS-e820: 00000000fec00000 - 0000000100000000 (reserved)
[ 0.000000] BIOS-e820: 0000000100000000 - 0000000130000000 (usable)
[ 0.000000] DMI 2.4 present.
[ 0.000000] last_pfn = 0x130000 max_arch_pfn = 0x3ffffffff
[ 0.000000] last_pfn = 0xcfee0 max_arch_pfn = 0x3ffffffff
[ 0.000000] init_memory_mapping: 0000000000000000-00000000cfee0000
[ 0.000000] 0000000000 - 00cfe00000 page 2M
[ 0.000000] 00cfe00000 - 00cfee0000 page 4k
[ 0.000000] kernel direct mapping tables up to cfee0000 @ 8000-e000
[ 0.000000] last_map_addr: cfee0000 end: cfee0000
[ 0.000000] init_memory_mapping: 0000000100000000-0000000130000000
[ 0.000000] 0100000000 - 0130000000 page 2M
[ 0.000000] kernel direct mapping tables up to 130000000 @ c000-12000
[ 0.000000] last_map_addr: 130000000 end: 130000000
[ 0.000000] RAMDISK: 37bd9000 - 37fef391
[ 0.000000] ACPI: RSDP 000F6E20, 0014 (r0 GBT )
[ 0.000000] ACPI: RSDT CFEE3040, 003C (r1 GBT GBTUACPI 42302E31
GBTU 1010101)
[ 0.000000] ACPI: FACP CFEE30C0, 0074 (r1 GBT GBTUACPI 42302E31
GBTU 1010101)
[ 0.000000] ACPI: DSDT CFEE3180, 5363 (r1 GBT GBTUACPI 1000
MSFT 100000C)
[ 0.000000] ACPI: FACS CFEE0000, 0040
[ 0.000000] ACPI: HPET CFEE8640, 0038 (r1 GBT GBTUACPI 42302E31
GBTU 98)
[ 0.000000] ACPI: MCFG CFEE86C0, 003C (r1 GBT GBTUACPI 42302E31
GBTU 1010101)
[ 0.000000] ACPI: APIC CFEE8540, 0084 (r1 GBT GBTUACPI 42302E31
GBTU 1010101)
[ 0.000000] ACPI: SSDT CFEE8740, 019E (r1 PmRef Cpu0Ist 3000
INTL 20040311)
[ 0.000000] ACPI: SSDT CFEE8BD0, 0275 (r1 PmRef CpuPm 3000
INTL 20040311)
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] (7 early reservations) ==> bootmem [0000000000 - 0130000000]
[ 0.000000] #0 [0000000000 - 0000001000] BIOS data page ==>
[0000000000 - 0000001000]
[ 0.000000] #1 [0000006000 - 0000008000] TRAMPOLINE ==>
[0000006000 - 0000008000]
[ 0.000000] #2 [0000200000 - 00008baba8] TEXT DATA BSS ==>
[0000200000 - 00008baba8]
[ 0.000000] #3 [0037bd9000 - 0037fef391] RAMDISK ==>
[0037bd9000 - 0037fef391]
[ 0.000000] #4 [000009f800 - 0000100000] BIOS reserved ==>
[000009f800 - 0000100000]
[ 0.000000] #5 [0000008000 - 000000c000] PGTABLE ==>
[0000008000 - 000000c000]
[ 0.000000] #6 [000000c000 - 000000d000] PGTABLE ==>
[000000c000 - 000000d000]
[ 0.000000] found SMP MP-table at [ffff8800000f5470] 000f5470
[ 0.000000] [ffffe20000000000-ffffe200043fffff] PMD ->
[ffff880028200000-ffff88002c5fffff] on node 0
[ 0.000000] Zone PFN ranges:
[ 0.000000] DMA 0x00000000 -> 0x00001000
[ 0.000000] DMA32 0x00001000 -> 0x00100000
[ 0.000000] Normal 0x00100000 -> 0x00130000
[ 0.000000] Movable zone start PFN for each node
[ 0.000000] early_node_map[3] active PFN ranges
[ 0.000000] 0: 0x00000000 -> 0x0000009f
[ 0.000000] 0: 0x00000100 -> 0x000cfee0
[ 0.000000] 0: 0x00100000 -> 0x00130000
[ 0.000000] On node 0 totalpages: 1048191
[ 0.000000] DMA zone: 56 pages used for memmap
[ 0.000000] DMA zone: 1828 pages reserved
[ 0.000000] DMA zone: 2115 pages, LIFO batch:0
[ 0.000000] DMA32 zone: 14280 pages used for memmap
[ 0.000000] DMA32 zone: 833304 pages, LIFO batch:31
[ 0.000000] Normal zone: 2688 pages used for memmap
[ 0.000000] Normal zone: 193920 pages, LIFO batch:31
[ 0.000000] Movable zone: 0 pages used for memmap
[ 0.000000] ACPI: PM-Timer IO Port: 0x408
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x02] disabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x03] disabled)
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x00] dfl dfl lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] dfl dfl lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x02] dfl dfl lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x03] dfl dfl lint[0x1])
[ 0.000000] ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
[ 0.000000] IOAPIC[0]: apic_id 2, version 0, address 0xfec00000, GSI 0-23
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[ 0.000000] ACPI: IRQ0 used by override.
[ 0.000000] ACPI: IRQ2 used by override.
[ 0.000000] ACPI: IRQ9 used by override.
[ 0.000000] ACPI: HPET id: 0x8086a201 base: 0xfed00000
[ 0.000000] Using ACPI (MADT) for SMP configuration information
[ 0.000000] SMP: Allowing 2 CPUs, 0 hotplug CPUs
[ 0.000000] Allocating PCI resources starting at e2000000 (gap:
e0000000:1ec00000)
[ 0.000000] PERCPU: Allocating 45056 bytes of per cpu data
[ 0.000000] NR_CPUS: 2, nr_cpu_ids: 2, nr_node_ids 1
[ 0.000000] Built 1 zonelists in Zone order, mobility grouping on.
Total pages: 1029339
[ 0.000000] Kernel command line:
root=UUID=d0d52b48-db63-4fd7-bb7a-4af5119d2017 ro printk.time=1
initcall_debug
[ 0.000000] Initializing CPU#0
[ 0.000000] PID hash table entries: 4096 (order: 12, 32768 bytes)
[ 0.000000] Fast TSC calibration using PIT
[ 0.000000] Detected 2666.670 MHz processor.
[ 0.004000] Console: colour VGA+ 80x25
[ 0.004000] console [tty0] enabled
[ 0.004000] Dentry cache hash table entries: 524288 (order: 10,
4194304 bytes)
[ 0.004000] Inode-cache hash table entries: 262144 (order: 9, 2097152
bytes)
[ 0.004000] Checking aperture...
[ 0.004000] No AGP bridge found
[ 0.004000] PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
[ 0.004000] Placing software IO TLB between 0x20000000 - 0x24000000
[ 0.004000] Memory: 4038504k/4980736k available (3772k kernel code,
787972k absent, 153372k reserved, 2142k data, 336k init)
[ 0.004000] hpet clockevent registered
[ 0.004000] HPET: 3 timers in total, 0 timers will be used for
per-cpu timer
[ 0.004000] Calibrating delay loop (skipped), value calculated using
timer frequency.. 5333.34 BogoMIPS (lpj=10666680)
[ 0.004000] Mount-cache hash table entries: 256
[ 0.004000] CPU: L1 I cache: 32K, L1 D cache: 32K
[ 0.004000] CPU: L2 cache: 4096K
[ 0.004000] CPU: Physical Processor ID: 0
[ 0.004000] CPU: Processor Core ID: 0
[ 0.004000] CPU0: Thermal monitoring enabled (TM2)
[ 0.004000] using mwait in idle threads.
[ 0.004000] ACPI: Core revision 20080926
[ 0.007718] Setting APIC routing to flat
[ 0.008000] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[ 0.047829] CPU0: Intel(R) Core(TM)2 CPU 6700 @ 2.66GHz
stepping 06
[ 0.048001] calling migration_init+0x0/0x5b @ 1
[ 0.048001] initcall migration_init+0x0/0x5b returned 1 after 0 usecs
[ 0.048001] initcall migration_init+0x0/0x5b returned with error code 1
[ 0.048001] calling spawn_ksoftirqd+0x0/0x61 @ 1
[ 0.048001] initcall spawn_ksoftirqd+0x0/0x61 returned 0 after 0 usecs
[ 0.048001] calling init_call_single_data+0x0/0x57 @ 1
[ 0.048001] initcall init_call_single_data+0x0/0x57 returned 0 after
0 usecs
[ 0.048001] Booting processor 1 APIC 0x1 ip 0x6000
[ 0.004000] Initializing CPU#1
[ 0.004000] Calibrating delay using timer specific routine.. 5333.27
BogoMIPS (lpj=10666545)
[ 0.004000] CPU: L1 I cache: 32K, L1 D cache: 32K
[ 0.004000] CPU: L2 cache: 4096K
[ 0.004000] CPU: Physical Processor ID: 0
[ 0.004000] CPU: Processor Core ID: 1
[ 0.004000] CPU1: Thermal monitoring enabled (TM2)
[ 0.132399] CPU1: Intel(R) Core(TM)2 CPU 6700 @ 2.66GHz
stepping 06
[ 0.132902] checking TSC synchronization [CPU#0 -> CPU#1]: passed.
[ 0.136016] Brought up 2 CPUs
[ 0.136068] Total of 2 processors activated (10666.61 BogoMIPS).
[ 0.136161] CPU0 attaching sched-domain:
[ 0.136163] domain 0: span 0-1 level MC
[ 0.136165] groups: 0 1
[ 0.136168] CPU1 attaching sched-domain:
[ 0.136169] domain 0: span 0-1 level MC
[ 0.136170] groups: 1 0
[ 0.136217] calling init_cpufreq_transition_notifier_list+0x0/0x1b @ 1
[ 0.136217] initcall init_cpufreq_transition_notifier_list+0x0/0x1b
returned 0 after 0 usecs
[ 0.136217] calling net_ns_init+0x0/0x18d @ 1
[ 0.136232] net_namespace: 912 bytes
[ 0.136285] initcall net_ns_init+0x0/0x18d returned 0 after 0 usecs
[ 0.136340] calling cpufreq_tsc+0x0/0x42 @ 1
[ 0.136392] initcall cpufreq_tsc+0x0/0x42 returned 0 after 0 usecs
[ 0.136448] calling init_smp_flush+0x0/0x51 @ 1
[ 0.136501] initcall init_smp_flush+0x0/0x51 returned 0 after 0 usecs
[ 0.136555] calling sysctl_init+0x0/0x32 @ 1
[ 0.136673] initcall sysctl_init+0x0/0x32 returned 0 after 0 usecs
[ 0.136727] calling ksysfs_init+0x0/0xbb @ 1
[ 0.136782] initcall ksysfs_init+0x0/0xbb returned 0 after 0 usecs
[ 0.136836] calling init_jiffies_clocksource+0x0/0x12 @ 1
[ 0.136891] initcall init_jiffies_clocksource+0x0/0x12 returned 0
after 0 usecs
[ 0.136969] calling pm_init+0x0/0x38 @ 1
[ 0.137024] initcall pm_init+0x0/0x38 returned 0 after 0 usecs
[ 0.137078] calling stop_machine_init+0x0/0x47 @ 1
[ 0.137139] initcall stop_machine_init+0x0/0x47 returned 0 after 0 usecs
[ 0.137139] calling filelock_init+0x0/0x2e @ 1
[ 0.137139] initcall filelock_init+0x0/0x2e returned 0 after 0 usecs
[ 0.137139] calling init_misc_binfmt+0x0/0x44 @ 1
[ 0.137139] initcall init_misc_binfmt+0x0/0x44 returned 0 after 0 usecs
[ 0.137139] calling init_script_binfmt+0x0/0x12 @ 1
[ 0.137139] initcall init_script_binfmt+0x0/0x12 returned 0 after 0 usecs
[ 0.137139] calling init_elf_binfmt+0x0/0x12 @ 1
[ 0.137139] initcall init_elf_binfmt+0x0/0x12 returned 0 after 0 usecs
[ 0.137139] calling init_compat_elf_binfmt+0x0/0x12 @ 1
[ 0.137139] initcall init_compat_elf_binfmt+0x0/0x12 returned 0 after
0 usecs
[ 0.137139] calling debugfs_init+0x0/0x54 @ 1
[ 0.137139] initcall debugfs_init+0x0/0x54 returned 0 after 0 usecs
[ 0.137139] calling random32_init+0x0/0xdb @ 1
[ 0.137139] initcall random32_init+0x0/0xdb returned 0 after 0 usecs
[ 0.137139] calling cpufreq_core_init+0x0/0x84 @ 1
[ 0.137139] initcall cpufreq_core_init+0x0/0x84 returned 0 after 0 usecs
[ 0.137139] calling cpuidle_init+0x0/0x43 @ 1
[ 0.137139] initcall cpuidle_init+0x0/0x43 returned 0 after 0 usecs
[ 0.137139] calling sock_init+0x0/0x60 @ 1
[ 0.137139] initcall sock_init+0x0/0x60 returned 0 after 0 usecs
[ 0.137168] calling netlink_proto_init+0x0/0x161 @ 1
[ 0.137224] NET: Registered protocol family 16
[ 0.137282] initcall netlink_proto_init+0x0/0x161 returned 0 after 0
usecs
[ 0.137337] calling bdi_class_init+0x0/0x41 @ 1
[ 0.137396] initcall bdi_class_init+0x0/0x41 returned 0 after 0 usecs
[ 0.137396] calling kobject_uevent_init+0x0/0x49 @ 1
[ 0.140005] initcall kobject_uevent_init+0x0/0x49 returned 0 after 0
usecs
[ 0.140059] calling pcibus_class_init+0x0/0x19 @ 1
[ 0.140119] initcall pcibus_class_init+0x0/0x19 returned 0 after 0 usecs
[ 0.140119] calling pci_driver_init+0x0/0x19 @ 1
[ 0.140119] initcall pci_driver_init+0x0/0x19 returned 0 after 0 usecs
[ 0.140119] calling tty_class_init+0x0/0x31 @ 1
[ 0.140119] initcall tty_class_init+0x0/0x31 returned 0 after 0 usecs
[ 0.140119] calling vtconsole_class_init+0x0/0xcc @ 1
[ 0.140119] initcall vtconsole_class_init+0x0/0xcc returned 0 after 0
usecs
[ 0.140119] calling amd_postcore_init+0x0/0x8af @ 1
[ 0.140119] initcall amd_postcore_init+0x0/0x8af returned 0 after 0 usecs
[ 0.140168] calling arch_kdebugfs_init+0x0/0x32 @ 1
[ 0.140223] initcall arch_kdebugfs_init+0x0/0x32 returned 0 after 0 usecs
[ 0.140774] calling mtrr_if_init+0x0/0x9e @ 1
[ 0.140827] initcall mtrr_if_init+0x0/0x9e returned 0 after 0 usecs
[ 0.140882] calling ffh_cstate_init+0x0/0x35 @ 1
[ 0.140935] initcall ffh_cstate_init+0x0/0x35 returned 0 after 0 usecs
[ 0.140989] calling acpi_pci_init+0x0/0x5f @ 1
[ 0.141042] ACPI: bus type pci registered
[ 0.141094] initcall acpi_pci_init+0x0/0x5f returned 0 after 0 usecs
[ 0.141149] calling init_acpi_device_notify+0x0/0x4b @ 1
[ 0.141202] initcall init_acpi_device_notify+0x0/0x4b returned 0
after 0 usecs
[ 0.141281] calling pci_arch_init+0x0/0x53 @ 1
[ 0.141350] PCI: MCFG configuration 0: base d0000000 segment 0 buses
0 - 255
[ 0.141405] PCI: MCFG area at d0000000 reserved in E820
[ 0.146613] PCI: Using MMCONFIG at d0000000 - dfffffff
[ 0.146666] PCI: Using configuration type 1 for base access
[ 0.146722] initcall pci_arch_init+0x0/0x53 returned 0 after 3906 usecs
[ 0.146777] calling topology_init+0x0/0x35 @ 1
[ 0.146835] initcall topology_init+0x0/0x35 returned 0 after 0 usecs
[ 0.146835] calling mtrr_init_finialize+0x0/0x40 @ 1
[ 0.146835] initcall mtrr_init_finialize+0x0/0x40 returned 0 after 0
usecs
[ 0.146835] calling param_sysfs_init+0x0/0x1eb @ 1
[ 0.148021] initcall param_sysfs_init+0x0/0x1eb returned 0 after 3906
usecs
[ 0.148070] calling pm_sysrq_init+0x0/0x20 @ 1
[ 0.148123] initcall pm_sysrq_init+0x0/0x20 returned 0 after 0 usecs
[ 0.148177] calling readahead_init+0x0/0x3b @ 1
[ 0.148242] initcall readahead_init+0x0/0x3b returned 0 after 0 usecs
[ 0.148242] calling init_bio+0x0/0xc8 @ 1
[ 0.148242] initcall init_bio+0x0/0xc8 returned 0 after 0 usecs
[ 0.148242] calling cryptomgr_init+0x0/0x3a @ 1
[ 0.148265] initcall cryptomgr_init+0x0/0x3a returned 0 after 0 usecs
[ 0.148319] calling blk_settings_init+0x0/0x2a @ 1
[ 0.148373] initcall blk_settings_init+0x0/0x2a returned 0 after 0 usecs
[ 0.148427] calling blk_ioc_init+0x0/0x2a @ 1
[ 0.148483] initcall blk_ioc_init+0x0/0x2a returned 0 after 0 usecs
[ 0.148537] calling blk_softirq_init+0x0/0x77 @ 1
[ 0.148590] initcall blk_softirq_init+0x0/0x77 returned 0 after 0 usecs
[ 0.148644] calling genhd_device_init+0x0/0x69 @ 1
[ 0.148730] initcall genhd_device_init+0x0/0x69 returned 0 after 0 usecs
[ 0.148787] calling pci_slot_init+0x0/0x50 @ 1
[ 0.148841] initcall pci_slot_init+0x0/0x50 returned 0 after 0 usecs
[ 0.148895] calling acpi_init+0x0/0x239 @ 1
[ 0.149369] ACPI: EC: Look up EC in DSDT
[ 0.155438] ACPI: Interpreter enabled
[ 0.155493] ACPI: (supports S0 S5)
[ 0.155598] ACPI: Using IOAPIC for interrupt routing
[ 0.155685] initcall acpi_init+0x0/0x239 returned 0 after 3906 usecs
[ 0.155740] calling acpi_scan_init+0x0/0x109 @ 1
[ 0.156899] initcall acpi_scan_init+0x0/0x109 returned 0 after 3906 usecs
[ 0.160003] calling acpi_ec_init+0x0/0x61 @ 1
[ 0.160072] initcall acpi_ec_init+0x0/0x61 returned 0 after 0 usecs
[ 0.160072] calling acpi_pci_root_init+0x0/0x28 @ 1
[ 0.160117] ACPI: PCI Root Bridge [PCI0] (0000:00)
[ 0.160187] pci 0000:00:01.0: PME# supported from D0 D3hot D3cold
[ 0.160187] pci 0000:00:01.0: PME# disabled
[ 0.160203] pci 0000:00:1a.0: reg 20 io port: [0xc000-0xc01f]
[ 0.160240] pci 0000:00:1a.1: reg 20 io port: [0xc400-0xc41f]
[ 0.160277] pci 0000:00:1a.7: reg 10 32bit mmio: [0xf5205000-0xf52053ff]
[ 0.160334] pci 0000:00:1b.0: reg 10 64bit mmio: [0xf5200000-0xf5203fff]
[ 0.160356] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
[ 0.160411] pci 0000:00:1b.0: PME# disabled
[ 0.160497] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
[ 0.160552] pci 0000:00:1c.0: PME# disabled
[ 0.160640] pci 0000:00:1c.3: PME# supported from D0 D3hot D3cold
[ 0.160695] pci 0000:00:1c.3: PME# disabled
[ 0.160782] pci 0000:00:1c.4: PME# supported from D0 D3hot D3cold
[ 0.160837] pci 0000:00:1c.4: PME# disabled
[ 0.160923] pci 0000:00:1d.0: reg 20 io port: [0xc800-0xc81f]
[ 0.160960] pci 0000:00:1d.1: reg 20 io port: [0xcc00-0xcc1f]
[ 0.160996] pci 0000:00:1d.2: reg 20 io port: [0xd000-0xd01f]
[ 0.161032] pci 0000:00:1d.7: reg 10 32bit mmio: [0xf5204000-0xf52043ff]
[ 0.161150] pci 0000:00:1f.0: quirk: region 0400-047f claimed by ICH6
ACPI/GPIO/TCO
[ 0.161230] pci 0000:00:1f.0: quirk: region 0480-04bf claimed by ICH6
GPIO
[ 0.161311] pci 0000:00:1f.2: reg 10 io port: [0x00-0x07]
[ 0.161315] pci 0000:00:1f.2: reg 14 io port: [0x00-0x03]
[ 0.161319] pci 0000:00:1f.2: reg 18 io port: [0x00-0x07]
[ 0.161323] pci 0000:00:1f.2: reg 1c io port: [0x00-0x03]
[ 0.161327] pci 0000:00:1f.2: reg 20 io port: [0xf000-0xf00f]
[ 0.161331] pci 0000:00:1f.2: reg 24 io port: [0xfc00-0xfc0f]
[ 0.161341] pci 0000:00:1f.2: PME# supported from D3hot
[ 0.161395] pci 0000:00:1f.2: PME# disabled
[ 0.161460] pci 0000:00:1f.3: reg 10 32bit mmio: [0xf5206000-0xf52060ff]
[ 0.161474] pci 0000:00:1f.3: reg 20 io port: [0x500-0x51f]
[ 0.161502] pci 0000:00:1f.5: reg 10 io port: [0xd800-0xd807]
[ 0.161506] pci 0000:00:1f.5: reg 14 io port: [0xdc00-0xdc03]
[ 0.161510] pci 0000:00:1f.5: reg 18 io port: [0xe000-0xe007]
[ 0.161514] pci 0000:00:1f.5: reg 1c io port: [0xe400-0xe403]
[ 0.161518] pci 0000:00:1f.5: reg 20 io port: [0xe800-0xe80f]
[ 0.161522] pci 0000:00:1f.5: reg 24 io port: [0xec00-0xec0f]
[ 0.161532] pci 0000:00:1f.5: PME# supported from D3hot
[ 0.161586] pci 0000:00:1f.5: PME# disabled
[ 0.161662] pci 0000:01:00.0: reg 10 32bit mmio: [0xf0000000-0xf0ffffff]
[ 0.161668] pci 0000:01:00.0: reg 14 64bit mmio: [0xe0000000-0xefffffff]
[ 0.161674] pci 0000:01:00.0: reg 1c 64bit mmio: [0xf1000000-0xf1ffffff]
[ 0.161678] pci 0000:01:00.0: reg 24 io port: [0x8000-0x807f]
[ 0.161682] pci 0000:01:00.0: reg 30 32bit mmio: [0x000000-0x01ffff]
[ 0.161717] pci 0000:00:01.0: bridge io port: [0x8000-0x8fff]
[ 0.161719] pci 0000:00:01.0: bridge 32bit mmio: [0xf0000000-0xf2ffffff]
[ 0.161722] pci 0000:00:01.0: bridge 64bit mmio pref:
[0xe0000000-0xefffffff]
[ 0.161752] pci 0000:00:1c.0: bridge io port: [0x7000-0x7fff]
[ 0.161836] pci 0000:03:00.0: reg 24 32bit mmio: [0xf5000000-0xf5001fff]
[ 0.161853] pci 0000:03:00.0: PME# supported from D3hot
[ 0.161908] pci 0000:03:00.0: PME# disabled
[ 0.162004] pci 0000:03:00.1: reg 10 io port: [0x9000-0x9007]
[ 0.162012] pci 0000:03:00.1: reg 14 io port: [0x9400-0x9403]
[ 0.162019] pci 0000:03:00.1: reg 18 io port: [0x9800-0x9807]
[ 0.162026] pci 0000:03:00.1: reg 1c io port: [0x9c00-0x9c03]
[ 0.162034] pci 0000:03:00.1: reg 20 io port: [0xa000-0xa00f]
[ 0.162098] pci 0000:00:1c.3: bridge io port: [0x9000-0xafff]
[ 0.162100] pci 0000:00:1c.3: bridge 32bit mmio: [0xf5000000-0xf50fffff]
[ 0.162153] pci 0000:04:00.0: reg 10 64bit mmio: [0xf4000000-0xf4003fff]
[ 0.162160] pci 0000:04:00.0: reg 18 io port: [0xb000-0xb0ff]
[ 0.162182] pci 0000:04:00.0: reg 30 32bit mmio: [0x000000-0x01ffff]
[ 0.162192] pci 0000:04:00.0: supports D1 D2
[ 0.162193] pci 0000:04:00.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.162250] pci 0000:04:00.0: PME# disabled
[ 0.162333] pci 0000:00:1c.4: bridge io port: [0xb000-0xbfff]
[ 0.162336] pci 0000:00:1c.4: bridge 32bit mmio: [0xf3000000-0xf4ffffff]
[ 0.162358] pci 0000:05:01.0: reg 10 32bit mmio: [0xf5100000-0xf5101fff]
[ 0.162416] pci 0000:00:1e.0: transparent bridge
[ 0.162471] pci 0000:00:1e.0: bridge 32bit mmio: [0xf5100000-0xf51fffff]
[ 0.162491] bus 00 -> node 0
[ 0.162495] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
[ 0.162704] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEX0._PRT]
[ 0.162780] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEX3._PRT]
[ 0.162857] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEX4._PRT]
[ 0.162931] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.HUB0._PRT]
[ 0.172333] initcall acpi_pci_root_init+0x0/0x28 returned 0 after
11718 usecs
[ 0.172333] calling acpi_pci_link_init+0x0/0x63 @ 1
[ 0.172333] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 9 *10 11
12 14 15)
[ 0.172657] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 9 10 11
12 14 15) *0, disabled.
[ 0.173180] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 7 *9 10 11
12 14 15)
[ 0.173653] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 9 10 *11
12 14 15)
[ 0.174127] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 9 10 11
12 14 15) *0, disabled.
[ 0.174649] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 *6 7 9 10 11
12 14 15)
[ 0.175123] ACPI: PCI Interrupt Link [LNK0] (IRQs 3 4 *5 6 7 9 10 11
12 14 15)
[ 0.176273] ACPI: PCI Interrupt Link [LNK1] (IRQs *3 4 5 6 7 9 10 11
12 14 15)
[ 0.176707] initcall acpi_pci_link_init+0x0/0x63 returned 0 after
3906 usecs
[ 0.176707] calling acpi_power_init+0x0/0x77 @ 1
[ 0.176707] initcall acpi_power_init+0x0/0x77 returned 0 after 0 usecs
[ 0.176707] calling acpi_system_init+0x0/0x1ba @ 1
[ 0.176707] initcall acpi_system_init+0x0/0x1ba returned 0 after 0 usecs
[ 0.176707] calling pnp_init+0x0/0x12 @ 1
[ 0.176707] initcall pnp_init+0x0/0x12 returned 0 after 0 usecs
[ 0.176707] calling misc_init+0x0/0xa4 @ 1
[ 0.176707] initcall misc_init+0x0/0xa4 returned 0 after 0 usecs
[ 0.176707] calling init_scsi+0x0/0x89 @ 1
[ 0.176707] SCSI subsystem initialized
[ 0.176707] initcall init_scsi+0x0/0x89 returned 0 after 0 usecs
[ 0.176707] calling ata_init+0x0/0x3f6 @ 1
[ 0.176707] libata version 3.00 loaded.
[ 0.176707] initcall ata_init+0x0/0x3f6 returned 0 after 0 usecs
[ 0.176707] calling usb_init+0x0/0x135 @ 1
[ 0.176707] usbcore: registered new interface driver usbfs
[ 0.176707] usbcore: registered new interface driver hub
[ 0.176707] usbcore: registered new device driver usb
[ 0.176707] initcall usb_init+0x0/0x135 returned 0 after 0 usecs
[ 0.176707] calling serio_init+0x0/0xa0 @ 1
[ 0.176707] initcall serio_init+0x0/0xa0 returned 0 after 0 usecs
[ 0.176707] calling input_init+0x0/0x119 @ 1
[ 0.176707] initcall input_init+0x0/0x119 returned 0 after 0 usecs
[ 0.176707] calling power_supply_class_init+0x0/0x38 @ 1
[ 0.176707] initcall power_supply_class_init+0x0/0x38 returned 0
after 0 usecs
[ 0.176707] calling thermal_init+0x0/0x43 @ 1
[ 0.176707] initcall thermal_init+0x0/0x43 returned 0 after 0 usecs
[ 0.176707] calling md_init+0x0/0xdc @ 1
[ 0.176707] initcall md_init+0x0/0xdc returned 0 after 0 usecs
[ 0.176707] calling leds_init+0x0/0x31 @ 1
[ 0.176707] initcall leds_init+0x0/0x31 returned 0 after 0 usecs
[ 0.176707] calling pci_subsys_init+0x0/0x130 @ 1
[ 0.176707] PCI: Using ACPI for IRQ routing
[ 0.176707] initcall pci_subsys_init+0x0/0x130 returned 0 after 0 usecs
[ 0.176707] calling proto_init+0x0/0x2e @ 1
[ 0.176707] initcall proto_init+0x0/0x2e returned 0 after 0 usecs
[ 0.176707] calling net_dev_init+0x0/0x14d @ 1
[ 0.176707] initcall net_dev_init+0x0/0x14d returned 0 after 0 usecs
[ 0.176707] calling neigh_init+0x0/0x71 @ 1
[ 0.176707] initcall neigh_init+0x0/0x71 returned 0 after 0 usecs
[ 0.176707] calling genl_init+0x0/0xea @ 1
[ 0.196009] initcall genl_init+0x0/0xea returned 0 after 19531 usecs
[ 0.196067] calling wireless_nlevent_init+0x0/0x31 @ 1
[ 0.196124] initcall wireless_nlevent_init+0x0/0x31 returned 0 after
0 usecs
[ 0.196183] calling cfg80211_init+0x0/0x90 @ 1
[ 0.208033] cfg80211: Calling CRDA to update world regulatory domain
[ 0.208083] cfg80211: Failed calling CRDA
[ 0.208083] cfg80211: calling CRDA failed - unable to update world
regulatory domain, using static definition
[ 0.208165] initcall cfg80211_init+0x0/0x90 returned 0 after 11718 usecs
[ 0.208220] calling sysctl_init+0x0/0x4d @ 1
[ 0.208273] initcall sysctl_init+0x0/0x4d returned 0 after 0 usecs
[ 0.208327] calling pci_iommu_init+0x0/0x12 @ 1
[ 0.208392] initcall pci_iommu_init+0x0/0x12 returned 0 after 0 usecs
[ 0.208447] calling print_all_ICs+0x0/0x53b @ 1
[ 0.208501] initcall print_all_ICs+0x0/0x53b returned 0 after 0 usecs
[ 0.208556] calling hpet_late_init+0x0/0x1c2 @ 1
[ 0.208610] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0
[ 0.208759] hpet0: 3 comparators, 64-bit 14.318180 MHz counter
[ 0.212009] initcall hpet_late_init+0x0/0x1c2 returned 0 after 3906 usecs
[ 0.212063] calling clocksource_done_booting+0x0/0x12 @ 1
[ 0.212120] initcall clocksource_done_booting+0x0/0x12 returned 0
after 0 usecs
[ 0.212203] calling init_pipe_fs+0x0/0x51 @ 1
[ 0.212270] initcall init_pipe_fs+0x0/0x51 returned 0 after 0 usecs
[ 0.212325] calling init_mnt_writers+0x0/0x57 @ 1
[ 0.212378] initcall init_mnt_writers+0x0/0x57 returned 0 after 0 usecs
[ 0.212432] calling eventpoll_init+0x0/0xbc @ 1
[ 0.212493] initcall eventpoll_init+0x0/0xbc returned 0 after 0 usecs
[ 0.212548] calling anon_inode_init+0x0/0x126 @ 1
[ 0.212603] initcall anon_inode_init+0x0/0x126 returned 0 after 0 usecs
[ 0.212658] calling acpi_event_init+0x0/0x5a @ 1
[ 0.228129] initcall acpi_event_init+0x0/0x5a returned 0 after 15748
usecs
[ 0.228187] calling pnpacpi_init+0x0/0x8e @ 1
[ 0.228242] pnp: PnP ACPI init
[ 0.228303] ACPI: bus type pnp registered
[ 0.230828] pnp: PnP ACPI: found 14 devices
[ 0.230881] ACPI: ACPI bus type pnp unregistered
[ 0.230934] initcall pnpacpi_init+0x0/0x8e returned 0 after 2628 usecs
[ 0.230989] calling pnp_system_init+0x0/0x13 @ 1
[ 0.231047] system 00:01: ioport range 0x4d0-0x4d1 has been reserved
[ 0.231101] system 00:01: ioport range 0x290-0x29f has been reserved
[ 0.231155] system 00:01: ioport range 0x800-0x87f has been reserved
[ 0.231209] system 00:01: ioport range 0x290-0x294 has been reserved
[ 0.231264] system 00:01: ioport range 0x880-0x88f has been reserved
[ 0.231322] system 00:0a: ioport range 0x400-0x4bf could not be reserved
[ 0.231379] system 00:0b: iomem range 0xd0000000-0xdfffffff has been
reserved
[ 0.231436] system 00:0c: iomem range 0xce000-0xcffff has been reserved
[ 0.231986] system 00:0c: iomem range 0xf0000-0xf7fff could not be
reserved
[ 0.232041] system 00:0c: iomem range 0xf8000-0xfbfff could not be
reserved
[ 0.232096] system 00:0c: iomem range 0xfc000-0xfffff could not be
reserved
[ 0.232156] system 00:0c: iomem range 0xcfee0000-0xcfefffff could not
be reserved
[ 0.232235] system 00:0c: iomem range 0x0-0x9ffff could not be reserved
[ 0.232290] system 00:0c: iomem range 0x100000-0xcfedffff could not
be reserved
[ 0.232369] system 00:0c: iomem range 0xfec00000-0xfec00fff has been
reserved
[ 0.232424] system 00:0c: iomem range 0xfed10000-0xfed1dfff has been
reserved
[ 0.232479] system 00:0c: iomem range 0xfed20000-0xfed8ffff has been
reserved
[ 0.232533] system 00:0c: iomem range 0xfee00000-0xfee00fff has been
reserved
[ 0.232588] system 00:0c: iomem range 0xffb00000-0xffb7ffff has been
reserved
[ 0.232643] system 00:0c: iomem range 0xfff00000-0xffffffff has been
reserved
[ 0.232698] system 00:0c: iomem range 0xe0000-0xeffff has been reserved
[ 0.232775] initcall pnp_system_init+0x0/0x13 returned 0 after 1691 usecs
[ 0.232829] calling chr_dev_init+0x0/0xa3 @ 1
[ 0.233119] initcall chr_dev_init+0x0/0xa3 returned 0 after 230 usecs
[ 0.233174] calling firmware_class_init+0x0/0x87 @ 1
[ 0.233247] initcall firmware_class_init+0x0/0x87 returned 0 after 18
usecs
[ 0.233302] calling loopback_init+0x0/0x12 @ 1
[ 0.233404] initcall loopback_init+0x0/0x12 returned 0 after 47 usecs
[ 0.233459] calling cpufreq_gov_performance_init+0x0/0x12 @ 1
[ 0.233513] initcall cpufreq_gov_performance_init+0x0/0x12 returned 0
after 0 usecs
[ 0.233593] calling cpufreq_gov_dbs_init+0x0/0x91 @ 1
[ 0.233673] initcall cpufreq_gov_dbs_init+0x0/0x91 returned 0 after
24 usecs
[ 0.233728] calling init_acpi_pm_clocksource+0x0/0x105 @ 1
[ 0.238261] initcall init_acpi_pm_clocksource+0x0/0x105 returned 0
after 4379 usecs
[ 0.238340] calling pcibios_assign_resources+0x0/0x8a @ 1
[ 0.238417] pci 0000:00:01.0: PCI bridge, secondary bus 0000:01
[ 0.238471] pci 0000:00:01.0: IO window: 0x8000-0x8fff
[ 0.238525] pci 0000:00:01.0: MEM window: 0xf0000000-0xf2ffffff
[ 0.238580] pci 0000:00:01.0: PREFETCH window:
0x000000e0000000-0x000000efffffff
[ 0.238661] pci 0000:00:1c.0: PCI bridge, secondary bus 0000:02
[ 0.238715] pci 0000:00:1c.0: IO window: 0x7000-0x7fff
[ 0.238770] pci 0000:00:1c.0: MEM window: disabled
[ 0.238824] pci 0000:00:1c.0: PREFETCH window: disabled
[ 0.238880] pci 0000:00:1c.3: PCI bridge, secondary bus 0000:03
[ 0.238934] pci 0000:00:1c.3: IO window: 0x9000-0xafff
[ 0.238989] pci 0000:00:1c.3: MEM window: 0xf5000000-0xf50fffff
[ 0.239044] pci 0000:00:1c.3: PREFETCH window: disabled
[ 0.239100] pci 0000:00:1c.4: PCI bridge, secondary bus 0000:04
[ 0.239155] pci 0000:00:1c.4: IO window: 0xb000-0xbfff
[ 0.239210] pci 0000:00:1c.4: MEM window: 0xf3000000-0xf4ffffff
[ 0.239265] pci 0000:00:1c.4: PREFETCH window:
0x000000f5300000-0x000000f53fffff
[ 0.239347] pci 0000:00:1e.0: PCI bridge, secondary bus 0000:05
[ 0.239400] pci 0000:00:1e.0: IO window: disabled
[ 0.239455] pci 0000:00:1e.0: MEM window: 0xf5100000-0xf51fffff
[ 0.239510] pci 0000:00:1e.0: PREFETCH window: disabled
[ 0.239570] pci 0000:00:01.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 0.239626] pci 0000:00:01.0: setting latency timer to 64
[ 0.239631] pci 0000:00:1c.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 0.239686] pci 0000:00:1c.0: setting latency timer to 64
[ 0.239692] pci 0000:00:1c.3: PCI INT D -> GSI 19 (level, low) -> IRQ 19
[ 0.239748] pci 0000:00:1c.3: setting latency timer to 64
[ 0.239752] pci 0000:00:1c.4: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 0.239808] pci 0000:00:1c.4: setting latency timer to 64
[ 0.239813] pci 0000:00:1e.0: setting latency timer to 64
[ 0.239815] bus: 00 index 0 io port: [0x00-0xffff]
[ 0.239868] bus: 00 index 1 mmio: [0x000000-0xffffffffffffffff]
[ 0.239921] bus: 01 index 0 io port: [0x8000-0x8fff]
[ 0.239974] bus: 01 index 1 mmio: [0xf0000000-0xf2ffffff]
[ 0.240027] bus: 01 index 2 mmio: [0xe0000000-0xefffffff]
[ 0.240080] bus: 01 index 3 mmio: [0x0-0x0]
[ 0.240153] bus: 02 index 0 io port: [0x7000-0x7fff]
[ 0.240206] bus: 02 index 1 mmio: [0x0-0x0]
[ 0.240257] bus: 02 index 2 mmio: [0x0-0x0]
[ 0.240309] bus: 02 index 3 mmio: [0x0-0x0]
[ 0.240361] bus: 03 index 0 io port: [0x9000-0xafff]
[ 0.240414] bus: 03 index 1 mmio: [0xf5000000-0xf50fffff]
[ 0.240467] bus: 03 index 2 mmio: [0x0-0x0]
[ 0.240518] bus: 03 index 3 mmio: [0x0-0x0]
[ 0.240571] bus: 04 index 0 io port: [0xb000-0xbfff]
[ 0.240623] bus: 04 index 1 mmio: [0xf3000000-0xf4ffffff]
[ 0.240676] bus: 04 index 2 mmio: [0xf5300000-0xf53fffff]
[ 0.240729] bus: 04 index 3 mmio: [0x0-0x0]
[ 0.240781] bus: 05 index 0 mmio: [0x0-0x0]
[ 0.240833] bus: 05 index 1 mmio: [0xf5100000-0xf51fffff]
[ 0.240886] bus: 05 index 2 mmio: [0x0-0x0]
[ 0.240938] bus: 05 index 3 io port: [0x00-0xffff]
[ 0.240990] bus: 05 index 4 mmio: [0x000000-0xffffffffffffffff]
[ 0.241045] initcall pcibios_assign_resources+0x0/0x8a returned 0
after 2584 usecs
[ 0.241124] calling inet_init+0x0/0x258 @ 1
[ 0.241195] NET: Registered protocol family 2
[ 0.280571] IP route cache hash table entries: 131072 (order: 8,
1048576 bytes)
[ 0.280973] TCP established hash table entries: 262144 (order: 10,
4194304 bytes)
[ 0.282183] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
[ 0.282593] TCP: Hash tables configured (established 262144 bind 65536)
[ 0.282648] TCP reno registered
[ 0.292693] initcall inet_init+0x0/0x258 returned 0 after 50300 usecs
[ 0.292754] calling af_unix_init+0x0/0x58 @ 1
[ 0.292816] NET: Registered protocol family 1
[ 0.292887] initcall af_unix_init+0x0/0x58 returned 0 after 75 usecs
[ 0.292942] calling populate_rootfs+0x0/0x131 @ 1
[ 0.293068] checking if image is initramfs... it is
[ 0.501607] Switched to high resolution mode on CPU 1
[ 0.504610] Switched to high resolution mode on CPU 0
[ 0.564122] Freeing initrd memory: 4184k freed
[ 0.565043] initcall populate_rootfs+0x0/0x131 returned 0 after
265669 usecs
[ 0.565100] calling i8259A_init_sysfs+0x0/0x29 @ 1
[ 0.565256] initcall i8259A_init_sysfs+0x0/0x29 returned 0 after 96 usecs
[ 0.565313] calling vsyscall_init+0x0/0x6c @ 1
[ 0.565382] initcall vsyscall_init+0x0/0x6c returned 0 after 15 usecs
[ 0.565436] calling sbf_init+0x0/0x100 @ 1
[ 0.565488] initcall sbf_init+0x0/0x100 returned 0 after 0 usecs
[ 0.565543] calling i8237A_init_sysfs+0x0/0x29 @ 1
[ 0.565636] initcall i8237A_init_sysfs+0x0/0x29 returned 0 after 37 usecs
[ 0.565691] calling add_rtc_cmos+0x0/0xce @ 1
[ 0.565747] initcall add_rtc_cmos+0x0/0xce returned 0 after 2 usecs
[ 0.565802] calling cache_sysfs_init+0x0/0x5b @ 1
[ 0.566051] initcall cache_sysfs_init+0x0/0x5b returned 0 after 190 usecs
[ 0.566107] calling mce_init_device+0x0/0x81 @ 1
[ 0.566254] initcall mce_init_device+0x0/0x81 returned 0 after 91 usecs
[ 0.566309] calling periodic_mcheck_init+0x0/0x3f @ 1
[ 0.566364] initcall periodic_mcheck_init+0x0/0x3f returned 0 after 1
usecs
[ 0.566419] calling thermal_throttle_init_device+0x0/0x8e @ 1
[ 0.566476] initcall thermal_throttle_init_device+0x0/0x8e returned 0
after 2 usecs
[ 0.566557] calling msr_init+0x0/0x120 @ 1
[ 0.566680] initcall msr_init+0x0/0x120 returned 0 after 68 usecs
[ 0.566735] calling cpuid_init+0x0/0x120 @ 1
[ 0.566853] initcall cpuid_init+0x0/0x120 returned 0 after 64 usecs
[ 0.566908] calling init_lapic_sysfs+0x0/0x41 @ 1
[ 0.566999] initcall init_lapic_sysfs+0x0/0x41 returned 0 after 36 usecs
[ 0.567054] calling ioapic_init_sysfs+0x0/0xcf @ 1
[ 0.567145] initcall ioapic_init_sysfs+0x0/0xcf returned 0 after 36 usecs
[ 0.567200] calling add_pcspkr+0x0/0x2a @ 1
[ 0.567280] initcall add_pcspkr+0x0/0x2a returned 0 after 26 usecs
[ 0.567334] calling uv_ptc_init+0x0/0x77 @ 1
[ 0.567387] initcall uv_ptc_init+0x0/0x77 returned 0 after 0 usecs
[ 0.567441] calling uv_bau_init+0x0/0x486 @ 1
[ 0.567494] initcall uv_bau_init+0x0/0x486 returned 0 after 0 usecs
[ 0.567548] calling sgi_uv_sysfs_init+0x0/0xa0 @ 1
[ 0.567603] initcall sgi_uv_sysfs_init+0x0/0xa0 returned 0 after 2 usecs
[ 0.567658] calling init_vdso_vars+0x0/0x240 @ 1
[ 0.567720] initcall init_vdso_vars+0x0/0x240 returned 0 after 9 usecs
[ 0.567774] calling ia32_binfmt_init+0x0/0x14 @ 1
[ 0.567831] initcall ia32_binfmt_init+0x0/0x14 returned 0 after 3 usecs
[ 0.567885] calling sysenter_setup+0x0/0x35f @ 1
[ 0.567941] initcall sysenter_setup+0x0/0x35f returned 0 after 2 usecs
[ 0.567995] calling init_aout_binfmt+0x0/0x13 @ 1
[ 0.568049] initcall init_aout_binfmt+0x0/0x13 returned 0 after 0 usecs
[ 0.568104] calling init_sched_debug_procfs+0x0/0x2c @ 1
[ 0.568167] initcall init_sched_debug_procfs+0x0/0x2c returned 0
after 9 usecs
[ 0.568246] calling proc_schedstat_init+0x0/0x22 @ 1
[ 0.568299] initcall proc_schedstat_init+0x0/0x22 returned 0 after 0
usecs
[ 0.568354] calling proc_execdomains_init+0x0/0x2a @ 1
[ 0.568408] initcall proc_execdomains_init+0x0/0x2a returned 0 after
0 usecs
[ 0.568463] calling ioresources_init+0x0/0x3c @ 1
[ 0.568517] initcall ioresources_init+0x0/0x3c returned 0 after 1 usecs
[ 0.568571] calling uid_cache_init+0x0/0x88 @ 1
[ 0.568637] initcall uid_cache_init+0x0/0x88 returned 0 after 12 usecs
[ 0.568691] calling init_posix_timers+0x0/0xe8 @ 1
[ 0.568749] initcall init_posix_timers+0x0/0xe8 returned 0 after 4 usecs
[ 0.568804] calling init_posix_cpu_timers+0x0/0xb3 @ 1
[ 0.568857] initcall init_posix_cpu_timers+0x0/0xb3 returned 0 after
0 usecs
[ 0.568912] calling nsproxy_cache_init+0x0/0x31 @ 1
[ 0.568968] initcall nsproxy_cache_init+0x0/0x31 returned 0 after 3 usecs
[ 0.569035] calling timekeeping_init_device+0x0/0x29 @ 1
[ 0.569136] initcall timekeeping_init_device+0x0/0x29 returned 0
after 45 usecs
[ 0.569216] calling init_clocksource_sysfs+0x0/0x52 @ 1
[ 0.569313] initcall init_clocksource_sysfs+0x0/0x52 returned 0 after
42 usecs
[ 0.569392] calling init_timer_list_procfs+0x0/0x2c @ 1
[ 0.569447] initcall init_timer_list_procfs+0x0/0x2c returned 0 after
1 usecs
[ 0.569502] calling futex_init+0x0/0xad @ 1
[ 0.569560] initcall futex_init+0x0/0xad returned 0 after 5 usecs
[ 0.569614] calling proc_dma_init+0x0/0x22 @ 1
[ 0.569668] initcall proc_dma_init+0x0/0x22 returned 0 after 0 usecs
[ 0.569722] calling proc_modules_init+0x0/0x22 @ 1
[ 0.569776] initcall proc_modules_init+0x0/0x22 returned 0 after 0 usecs
[ 0.569831] calling percpu_modinit+0x0/0x80 @ 1
[ 0.569884] initcall percpu_modinit+0x0/0x80 returned 0 after 0 usecs
[ 0.569938] calling kallsyms_init+0x0/0x25 @ 1
[ 0.569992] initcall kallsyms_init+0x0/0x25 returned 0 after 0 usecs
[ 0.570046] calling ikconfig_init+0x0/0x39 @ 1
[ 0.570099] initcall ikconfig_init+0x0/0x39 returned 0 after 0 usecs
[ 0.570154] calling utsname_sysctl_init+0x0/0x14 @ 1
[ 0.570712] initcall utsname_sysctl_init+0x0/0x14 returned 0 after 9
usecs
[ 0.570767] calling init_lstats_procfs+0x0/0x2b @ 1
[ 0.570821] initcall init_lstats_procfs+0x0/0x2b returned 0 after 0 usecs
[ 0.570876] calling init_per_zone_pages_min+0x0/0x58 @ 1
[ 0.571030] initcall init_per_zone_pages_min+0x0/0x58 returned 0
after 98 usecs
[ 0.571109] calling pdflush_init+0x0/0x12 @ 1
[ 0.571199] initcall pdflush_init+0x0/0x12 returned 0 after 31 usecs
[ 0.571253] calling kswapd_init+0x0/0x20 @ 1
[ 0.571320] initcall kswapd_init+0x0/0x20 returned 0 after 13 usecs
[ 0.571374] calling setup_vmstat+0x0/0xbd @ 1
[ 0.571432] initcall setup_vmstat+0x0/0xbd returned 0 after 4 usecs
[ 0.571486] calling mm_sysfs_init+0x0/0x29 @ 1
[ 0.571541] initcall mm_sysfs_init+0x0/0x29 returned 0 after 1 usecs
[ 0.571595] calling proc_vmalloc_init+0x0/0x25 @ 1
[ 0.571650] initcall proc_vmalloc_init+0x0/0x25 returned 0 after 1 usecs
[ 0.571704] calling procswaps_init+0x0/0x31 @ 1
[ 0.571758] initcall procswaps_init+0x0/0x31 returned 0 after 0 usecs
[ 0.571812] calling init_tmpfs+0x0/0xda @ 1
[ 0.571881] initcall init_tmpfs+0x0/0xda returned 0 after 15 usecs
[ 0.571936] calling slab_proc_init+0x0/0x25 @ 1
[ 0.571989] initcall slab_proc_init+0x0/0x25 returned 0 after 0 usecs
[ 0.572044] calling cpucache_init+0x0/0x35 @ 1
[ 0.572097] initcall cpucache_init+0x0/0x35 returned 0 after 0 usecs
[ 0.572152] calling fasync_init+0x0/0x2e @ 1
[ 0.572208] initcall fasync_init+0x0/0x2e returned 0 after 3 usecs
[ 0.572262] calling proc_filesystems_init+0x0/0x22 @ 1
[ 0.572317] initcall proc_filesystems_init+0x0/0x22 returned 0 after
0 usecs
[ 0.572372] calling inotify_setup+0x0/0x12 @ 1
[ 0.572424] initcall inotify_setup+0x0/0x12 returned 0 after 0 usecs
[ 0.572479] calling inotify_user_setup+0x0/0xbc @ 1
[ 0.572545] initcall inotify_user_setup+0x0/0xbc returned 0 after 12
usecs
[ 0.572600] calling aio_setup+0x0/0x71 @ 1
[ 0.572689] initcall aio_setup+0x0/0x71 returned 0 after 31 usecs
[ 0.572743] calling proc_locks_init+0x0/0x22 @ 1
[ 0.572797] initcall proc_locks_init+0x0/0x22 returned 0 after 0 usecs
[ 0.572852] calling init_sys32_ioctl+0x0/0x87 @ 1
[ 0.572915] initcall init_sys32_ioctl+0x0/0x87 returned 0 after 10 usecs
[ 0.572970] calling init_mbcache+0x0/0x14 @ 1
[ 0.573026] initcall init_mbcache+0x0/0x14 returned 0 after 0 usecs
[ 0.573081] calling dnotify_init+0x0/0x38 @ 1
[ 0.573137] initcall dnotify_init+0x0/0x38 returned 0 after 3 usecs
[ 0.573192] calling proc_cmdline_init+0x0/0x22 @ 1
[ 0.573247] initcall proc_cmdline_init+0x0/0x22 returned 0 after 1 usecs
[ 0.573301] calling proc_cpuinfo_init+0x0/0x22 @ 1
[ 0.573355] initcall proc_cpuinfo_init+0x0/0x22 returned 0 after 0 usecs
[ 0.573410] calling proc_devices_init+0x0/0x22 @ 1
[ 0.573464] initcall proc_devices_init+0x0/0x22 returned 0 after 0 usecs
[ 0.573519] calling proc_interrupts_init+0x0/0x22 @ 1
[ 0.573573] initcall proc_interrupts_init+0x0/0x22 returned 0 after 0
usecs
[ 0.573628] calling proc_loadavg_init+0x0/0x22 @ 1
[ 0.573682] initcall proc_loadavg_init+0x0/0x22 returned 0 after 0 usecs
[ 0.573737] calling proc_meminfo_init+0x0/0x22 @ 1
[ 0.573791] initcall proc_meminfo_init+0x0/0x22 returned 0 after 0 usecs
[ 0.573845] calling proc_stat_init+0x0/0x22 @ 1
[ 0.573899] initcall proc_stat_init+0x0/0x22 returned 0 after 0 usecs
[ 0.573954] calling proc_uptime_init+0x0/0x2d @ 1
[ 0.574008] initcall proc_uptime_init+0x0/0x2d returned 0 after 0 usecs
[ 0.574062] calling proc_version_init+0x0/0x22 @ 1
[ 0.574116] initcall proc_version_init+0x0/0x22 returned 0 after 0 usecs
[ 0.574171] calling proc_kcore_init+0x0/0x49 @ 1
[ 0.574225] initcall proc_kcore_init+0x0/0x49 returned 0 after 0 usecs
[ 0.574279] calling proc_kmsg_init+0x0/0x25 @ 1
[ 0.574333] initcall proc_kmsg_init+0x0/0x25 returned 0 after 0 usecs
[ 0.574387] calling proc_page_init+0x0/0x42 @ 1
[ 0.574442] initcall proc_page_init+0x0/0x42 returned 0 after 1 usecs
[ 0.574496] calling configfs_init+0x0/0xd6 @ 1
[ 0.574556] initcall configfs_init+0x0/0xd6 returned 0 after 6 usecs
[ 0.574610] calling init_devpts_fs+0x0/0x42 @ 1
[ 0.574669] initcall init_devpts_fs+0x0/0x42 returned 0 after 5 usecs
[ 0.574723] calling init_ext3_fs+0x0/0x72 @ 1
[ 0.574786] initcall init_ext3_fs+0x0/0x72 returned 0 after 9 usecs
[ 0.574840] calling init_ext4_fs+0x0/0x9a @ 1
[ 0.574913] initcall init_ext4_fs+0x0/0x9a returned 0 after 19 usecs
[ 0.574967] calling journal_init+0x0/0xa7 @ 1
[ 0.575035] initcall journal_init+0x0/0xa7 returned 0 after 15 usecs
[ 0.575090] calling journal_init+0x0/0xbc @ 1
[ 0.575158] initcall journal_init+0x0/0xbc returned 0 after 15 usecs
[ 0.575212] calling init_ext2_fs+0x0/0x72 @ 1
[ 0.575273] initcall init_ext2_fs+0x0/0x72 returned 0 after 8 usecs
[ 0.575327] calling init_ramfs_fs+0x0/0x12 @ 1
[ 0.575380] initcall init_ramfs_fs+0x0/0x12 returned 0 after 0 usecs
[ 0.575434] calling init_fat_fs+0x0/0x54 @ 1
[ 0.575493] initcall init_fat_fs+0x0/0x54 returned 0 after 6 usecs
[ 0.575547] calling init_vfat_fs+0x0/0x12 @ 1
[ 0.575600] initcall init_vfat_fs+0x0/0x12 returned 0 after 0 usecs
[ 0.575654] calling init_msdos_fs+0x0/0x12 @ 1
[ 0.575708] initcall init_msdos_fs+0x0/0x12 returned 0 after 0 usecs
[ 0.575762] calling init_iso9660_fs+0x0/0x66 @ 1
[ 0.575820] initcall init_iso9660_fs+0x0/0x66 returned 0 after 5 usecs
[ 0.575874] calling init_nfs_fs+0x0/0x150 @ 1
[ 0.575986] initcall init_nfs_fs+0x0/0x150 returned 0 after 50 usecs
[ 0.576040] calling init_nlm+0x0/0x22 @ 1
[ 0.576102] initcall init_nlm+0x0/0x22 returned 0 after 9 usecs
[ 0.576156] calling init_nls_cp437+0x0/0x12 @ 1
[ 0.576209] initcall init_nls_cp437+0x0/0x12 returned 0 after 0 usecs
[ 0.576263] calling init_nls_ascii+0x0/0x12 @ 1
[ 0.576315] initcall init_nls_ascii+0x0/0x12 returned 0 after 0 usecs
[ 0.576369] calling init_nls_iso8859_1+0x0/0x12 @ 1
[ 0.576422] initcall init_nls_iso8859_1+0x0/0x12 returned 0 after 0 usecs
[ 0.576477] calling init_nls_iso8859_15+0x0/0x12 @ 1
[ 0.576530] initcall init_nls_iso8859_15+0x0/0x12 returned 0 after 0
usecs
[ 0.576585] calling init_nls_utf8+0x0/0x25 @ 1
[ 0.576638] initcall init_nls_utf8+0x0/0x25 returned 0 after 0 usecs
[ 0.576692] calling init_ntfs_fs+0x0/0x247 @ 1
[ 0.576744] NTFS driver 2.1.29 [Flags: R/W DEBUG].
[ 0.576822] initcall init_ntfs_fs+0x0/0x247 returned 0 after 75 usecs
[ 0.576877] calling init_autofs4_fs+0x0/0x29 @ 1
[ 0.576964] initcall init_autofs4_fs+0x0/0x29 returned 0 after 31 usecs
[ 0.577039] calling ipc_init+0x0/0x23 @ 1
[ 0.577094] msgmni has been set to 7897
[ 0.577148] initcall ipc_init+0x0/0x23 returned 0 after 56 usecs
[ 0.577202] calling ipc_sysctl_init+0x0/0x18 @ 1
[ 0.577271] initcall ipc_sysctl_init+0x0/0x18 returned 0 after 16 usecs
[ 0.577326] calling crypto_algapi_init+0x0/0xd @ 1
[ 0.577380] initcall crypto_algapi_init+0x0/0xd returned 0 after 1 usecs
[ 0.577434] calling chainiv_module_init+0x0/0x12 @ 1
[ 0.577488] initcall chainiv_module_init+0x0/0x12 returned 0 after 0
usecs
[ 0.577543] calling eseqiv_module_init+0x0/0x21 @ 1
[ 0.577596] initcall eseqiv_module_init+0x0/0x21 returned 0 after 0 usecs
[ 0.577651] calling crypto_ecb_module_init+0x0/0x12 @ 1
[ 0.577704] initcall crypto_ecb_module_init+0x0/0x12 returned 0 after
0 usecs
[ 0.577759] calling aes_init+0x0/0x2f3 @ 1
[ 0.577861] initcall aes_init+0x0/0x2f3 returned 0 after 46 usecs
[ 0.577916] calling arc4_init+0x0/0x12 @ 1
[ 0.578004] initcall arc4_init+0x0/0x12 returned 0 after 34 usecs
[ 0.578058] calling krng_mod_init+0x0/0x1e @ 1
[ 0.578124] alg: No test for stdrng (krng)
[ 0.578180] initcall krng_mod_init+0x0/0x1e returned 0 after 66 usecs
[ 0.578234] calling proc_genhd_init+0x0/0x3c @ 1
[ 0.578289] initcall proc_genhd_init+0x0/0x3c returned 0 after 2 usecs
[ 0.578344] calling noop_init+0x0/0x14 @ 1
[ 0.578396] io scheduler noop registered
[ 0.578448] initcall noop_init+0x0/0x14 returned 0 after 51 usecs
[ 0.578502] calling deadline_init+0x0/0x1b @ 1
[ 0.578554] io scheduler deadline registered
[ 0.578606] initcall deadline_init+0x0/0x1b returned 0 after 50 usecs
[ 0.578661] calling cfq_init+0x0/0xa1 @ 1
[ 0.578720] io scheduler cfq registered (default)
[ 0.578773] initcall cfq_init+0x0/0xa1 returned 0 after 59 usecs
[ 0.578827] calling percpu_counter_startup+0x0/0x14 @ 1
[ 0.578881] initcall percpu_counter_startup+0x0/0x14 returned 0 after
0 usecs
[ 0.578937] calling pci_init+0x0/0x43 @ 1
[ 0.579099] pci 0000:01:00.0: Boot video device
[ 0.581103] initcall pci_init+0x0/0x43 returned 0 after 2061 usecs
[ 0.581158] calling pci_proc_init+0x0/0x7b @ 1
[ 0.581242] initcall pci_proc_init+0x0/0x7b returned 0 after 30 usecs
[ 0.581296] calling pcie_portdrv_init+0x0/0x50 @ 1
[ 0.581390] pcieport-driver 0000:00:01.0: setting latency timer to 64
[ 0.581412] pcieport-driver 0000:00:01.0: found MSI capability
[ 0.581480] pcieport-driver 0000:00:01.0: irq 319 for MSI/MSI-X
[ 0.581486] pci_express 0000:00:01.0:pcie00: allocate port service
[ 0.581514] pci_express 0000:00:01.0:pcie03: allocate port service
[ 0.581566] pcieport-driver 0000:00:1c.0: setting latency timer to 64
[ 0.581591] pcieport-driver 0000:00:1c.0: found MSI capability
[ 0.581660] pcieport-driver 0000:00:1c.0: irq 318 for MSI/MSI-X
[ 0.581669] pci_express 0000:00:1c.0:pcie00: allocate port service
[ 0.581695] pci_express 0000:00:1c.0:pcie02: allocate port service
[ 0.581720] pci_express 0000:00:1c.0:pcie03: allocate port service
[ 0.581779] pcieport-driver 0000:00:1c.3: setting latency timer to 64
[ 0.581804] pcieport-driver 0000:00:1c.3: found MSI capability
[ 0.581873] pcieport-driver 0000:00:1c.3: irq 317 for MSI/MSI-X
[ 0.581882] pci_express 0000:00:1c.3:pcie00: allocate port service
[ 0.581908] pci_express 0000:00:1c.3:pcie02: allocate port service
[ 0.581933] pci_express 0000:00:1c.3:pcie03: allocate port service
[ 0.581994] pcieport-driver 0000:00:1c.4: setting latency timer to 64
[ 0.582018] pcieport-driver 0000:00:1c.4: found MSI capability
[ 0.582088] pcieport-driver 0000:00:1c.4: irq 316 for MSI/MSI-X
[ 0.582096] pci_express 0000:00:1c.4:pcie00: allocate port service
[ 0.582123] pci_express 0000:00:1c.4:pcie02: allocate port service
[ 0.582148] pci_express 0000:00:1c.4:pcie03: allocate port service
[ 0.582227] initcall pcie_portdrv_init+0x0/0x50 returned 0 after 855
usecs
[ 0.582282] calling aer_service_init+0x0/0x29 @ 1
[ 0.582359] initcall aer_service_init+0x0/0x29 returned 0 after 22 usecs
[ 0.582414] calling acpi_reserve_resources+0x0/0xeb @ 1
[ 0.582470] initcall acpi_reserve_resources+0x0/0xeb returned 0 after
2 usecs
[ 0.582525] calling irqrouter_init_sysfs+0x0/0x38 @ 1
[ 0.582619] initcall irqrouter_init_sysfs+0x0/0x38 returned 0 after
38 usecs
[ 0.582674] calling acpi_container_init+0x0/0x42 @ 1
[ 0.583983] initcall acpi_container_init+0x0/0x42 returned 0 after
1228 usecs
[ 0.584040] calling rand_initialize+0x0/0x30 @ 1
[ 0.584102] initcall rand_initialize+0x0/0x30 returned 0 after 9 usecs
[ 0.584156] calling tty_init+0x0/0xfa @ 1
[ 0.585977] initcall tty_init+0x0/0xfa returned 0 after 1721 usecs
[ 0.586032] calling pty_init+0x0/0x706 @ 1
[ 0.602903] initcall pty_init+0x0/0x706 returned 0 after 16425 usecs
[ 0.602961] calling sysrq_init+0x0/0x25 @ 1
[ 0.603020] initcall sysrq_init+0x0/0x25 returned 0 after 6 usecs
[ 0.603074] calling raw_init+0x0/0xdf @ 1
[ 0.603179] initcall raw_init+0x0/0xdf returned 0 after 50 usecs
[ 0.603233] calling rtc_init+0x0/0xfb @ 1
[ 0.603324] Real Time Clock Driver v1.12ac
[ 0.603377] initcall rtc_init+0x0/0xfb returned 0 after 89 usecs
[ 0.603431] calling hpet_init+0x0/0x71 @ 1
[ 0.603647] initcall hpet_init+0x0/0x71 returned 0 after 159 usecs
[ 0.603702] calling mod_init+0x0/0x208 @ 1
[ 0.603822] initcall mod_init+0x0/0x208 returned -19 after 66 usecs
[ 0.603876] calling agp_init+0x0/0x38 @ 1
[ 0.603928] Linux agpgart interface v0.103
[ 0.603980] initcall agp_init+0x0/0x38 returned 0 after 50 usecs
[ 0.604552] calling hangcheck_init+0x0/0x8f @ 1
[ 0.604605] Hangcheck: starting hangcheck timer 0.9.0 (tick is 180
seconds, margin is 60 seconds).
[ 0.604684] Hangcheck: Using get_cycles().
[ 0.604738] initcall hangcheck_init+0x0/0x8f returned 0 after 130 usecs
[ 0.604793] calling serial8250_init+0x0/0x135 @ 1
[ 0.604845] Serial: 8250/16550 driver4 ports, IRQ sharing disabled
[ 0.605013] serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[ 0.605288] initcall serial8250_init+0x0/0x135 returned 0 after 421 usecs
[ 0.605343] calling serial8250_pnp_init+0x0/0x12 @ 1
[ 0.605652] 00:07: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[ 0.605822] initcall serial8250_pnp_init+0x0/0x12 returned 0 after
414 usecs
[ 0.605877] calling serial8250_pci_init+0x0/0x23 @ 1
[ 0.605971] initcall serial8250_pci_init+0x0/0x23 returned 0 after 39
usecs
[ 0.606028] calling topology_sysfs_init+0x0/0x55 @ 1
[ 0.606089] initcall topology_sysfs_init+0x0/0x55 returned 0 after 8
usecs
[ 0.606144] calling brd_init+0x0/0x1bc @ 1
[ 0.607145] brd: module loaded
[ 0.607197] initcall brd_init+0x0/0x1bc returned 0 after 976 usecs
[ 0.607252] calling loop_init+0x0/0x1dc @ 1
[ 0.607771] loop: module loaded
[ 0.607823] initcall loop_init+0x0/0x1dc returned 0 after 506 usecs
[ 0.607878] calling net_olddevs_init+0x0/0x9c @ 1
[ 0.607933] initcall net_olddevs_init+0x0/0x9c returned 0 after 2 usecs
[ 0.607988] calling ide_init+0x0/0x82 @ 1
[ 0.608040] Uniform Multi-Platform E-IDE driver
[ 0.608145] initcall ide_init+0x0/0x82 returned 0 after 100 usecs
[ 0.608200] calling jmicron_ide_init+0x0/0x1b @ 1
[ 0.608261] jmicron 0000:03:00.1: IDE controller (0x197b:0x2363 rev 0x02)
[ 0.608324] JMicron IDE 0000:03:00.1: enabling device (0000 -> 0001)
[ 0.608383] JMicron IDE 0000:03:00.1: PCI INT B -> GSI 16 (level,
low) -> IRQ 16
[ 0.608478] jmicron 0000:03:00.1: 100% native mode on irq 16
[ 0.608540] JMicron IDE 0000:03:00.1: setting latency timer to 64
[ 0.608545] ide0: BM-DMA at 0xa000-0xa007
[ 0.608608] ide1: BM-DMA at 0xa008-0xa00f
[ 0.608665] Probing IDE interface ide0...
[ 1.120457] hdb: WDC WD3000JB-00KFA0, ATA DISK drive
[ 1.176065] hdb: host max PIO5 wanted PIO255(auto-tune) selected PIO4
[ 1.176135] hdb: UDMA/100 mode selected
[ 1.176277] Probing IDE interface ide1...
[ 1.744084] ide0 at 0x9000-0x9007,0x9402 on irq 16
[ 1.744181] ide1 at 0x9800-0x9807,0x9c02 on irq 16
[ 1.744338] initcall jmicron_ide_init+0x0/0x1b returned 0 after
1109457 usecs
[ 1.744394] calling ide_gd_init+0x0/0x23 @ 1
[ 1.744446] ide-gd driver 1.18
[ 1.744505] hdb: max request size: 512KiB
[ 1.746323] hdb: Host Protected Area detected.
[ 1.746324] current capacity is 586070255 sectors (300067 MB)
[ 1.746325] native capacity is 586072368 sectors (300069 MB)
[ 1.746628] hdb: Host Protected Area disabled.
[ 1.746684] hdb: 586072368 sectors (300069 MB) w/8192KiB Cache,
CHS=36481/255/63
[ 1.746923] hdb: cache flushes supported
[ 1.747008] hdb: hdb1 hdb2 < hdb5 hdb6 hdb7 hdb8 hdb9 hdb10 hdb11
hdb12 hdb13 hdb14 > hdb3
[ 1.867046] initcall ide_gd_init+0x0/0x23 returned 0 after 119725 usecs
[ 1.867101] calling piix_init+0x0/0x31 @ 1
[ 1.867164] ata_piix 0000:00:1f.2: version 2.12
[ 1.867171] ata_piix 0000:00:1f.2: PCI INT B -> GSI 19 (level, low)
-> IRQ 19
[ 1.867226] ata_piix 0000:00:1f.2: MAP [ P0 P2 P1 P3 ]
[ 2.020042] ata_piix 0000:00:1f.2: setting latency timer to 64
[ 2.020109] scsi0 : ata_piix
[ 2.020275] scsi1 : ata_piix
[ 2.020365] ata1: SATA max UDMA/133 cmd 0x1f0 ctl 0x3f6 bmdma 0xf000
irq 14
[ 2.020421] ata2: SATA max UDMA/133 cmd 0x170 ctl 0x376 bmdma 0xf008
irq 15
[ 2.816064] ata1.00: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[ 2.816131] ata1.01: SATA link down (SStatus 4 SControl 300)
[ 2.864529] ata1.00: HPA detected: current 976771055, native 976773168
[ 2.864589] ata1.00: ATA-7: ST3500641AS, 3.AAJ, max UDMA/133
[ 2.864645] ata1.00: 976771055 sectors, multi 16: LBA48 NCQ (depth 0/32)
[ 2.947836] ata1.00: configured for UDMA/133
[ 3.594639] ata2.00: SATA link down (SStatus 0 SControl 300)
[ 3.594697] ata2.01: SATA link down (SStatus 4 SControl 300)
[ 3.594804] scsi 0:0:0:0: Direct-Access ATA ST3500641AS
3.AA PQ: 0 ANSI: 5
[ 3.594964] ata_piix 0000:00:1f.5: PCI INT B -> GSI 19 (level, low)
-> IRQ 19
[ 3.595020] ata_piix 0000:00:1f.5: MAP [ P0 -- P1 -- ]
[ 3.595213] ata_piix 0000:00:1f.5: setting latency timer to 64
[ 3.595241] scsi2 : ata_piix
[ 3.595339] scsi3 : ata_piix
[ 3.595426] ata3: SATA max UDMA/133 cmd 0xd800 ctl 0xdc00 bmdma
0xe800 irq 19
[ 3.595482] ata4: SATA max UDMA/133 cmd 0xe000 ctl 0xe400 bmdma
0xe808 irq 19
[ 4.068055] ata3: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[ 4.076200] ata3.00: ATAPI: SONY DVD RW AW-G170S, 1.72, max UDMA/66
[ 4.092215] ata3.00: configured for UDMA/66
[ 4.422604] ata4: SATA link down (SStatus 0 SControl 300)
[ 4.423723] scsi 2:0:0:0: CD-ROM SONY DVD RW AW-G170S
1.72 PQ: 0 ANSI: 5
[ 4.423953] initcall piix_init+0x0/0x31 returned 0 after 2496873 usecs
[ 4.424010] calling ehci_hcd_init+0x0/0x8d @ 1
[ 4.424063] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 4.424130] ehci_hcd 0000:00:1a.7: PCI INT C -> GSI 18 (level, low)
-> IRQ 18
[ 4.424197] ehci_hcd 0000:00:1a.7: setting latency timer to 64
[ 4.424199] ehci_hcd 0000:00:1a.7: EHCI Host Controller
[ 4.424290] ehci_hcd 0000:00:1a.7: new USB bus registered, assigned
bus number 1
[ 4.428271] ehci_hcd 0000:00:1a.7: cache line size of 32 is not supported
[ 4.428280] ehci_hcd 0000:00:1a.7: irq 18, io mem 0xf5205000
[ 4.444047] ehci_hcd 0000:00:1a.7: USB 2.0 started, EHCI 1.00
[ 4.444242] usb usb1: configuration #1 chosen from 1 choice
[ 4.444344] hub 1-0:1.0: USB hub found
[ 4.444400] hub 1-0:1.0: 4 ports detected
[ 4.444587] ehci_hcd 0000:00:1d.7: PCI INT A -> GSI 23 (level, low)
-> IRQ 23
[ 4.444647] ehci_hcd 0000:00:1d.7: setting latency timer to 64
[ 4.444649] ehci_hcd 0000:00:1d.7: EHCI Host Controller
[ 4.444739] ehci_hcd 0000:00:1d.7: new USB bus registered, assigned
bus number 2
[ 4.448717] ehci_hcd 0000:00:1d.7: cache line size of 32 is not supported
[ 4.448725] ehci_hcd 0000:00:1d.7: irq 23, io mem 0xf5204000
[ 4.464047] ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00
[ 4.464208] usb usb2: configuration #1 chosen from 1 choice
[ 4.464316] hub 2-0:1.0: USB hub found
[ 4.464371] hub 2-0:1.0: 6 ports detected
[ 4.464552] initcall ehci_hcd_init+0x0/0x8d returned 0 after 39539 usecs
[ 4.464608] calling uhci_hcd_init+0x0/0xc5 @ 1
[ 4.464660] uhci_hcd: USB Universal Host Controller Interface driver
[ 4.464727] uhci_hcd 0000:00:1a.0: PCI INT A -> GSI 16 (level, low)
-> IRQ 16
[ 4.464785] uhci_hcd 0000:00:1a.0: setting latency timer to 64
[ 4.464787] uhci_hcd 0000:00:1a.0: UHCI Host Controller
[ 4.464872] uhci_hcd 0000:00:1a.0: new USB bus registered, assigned
bus number 3
[ 4.464969] uhci_hcd 0000:00:1a.0: irq 16, io base 0x0000c000
[ 4.465100] usb usb3: configuration #1 chosen from 1 choice
[ 4.465188] hub 3-0:1.0: USB hub found
[ 4.465243] hub 3-0:1.0: 2 ports detected
[ 4.465402] uhci_hcd 0000:00:1a.1: PCI INT B -> GSI 21 (level, low)
-> IRQ 21
[ 4.465460] uhci_hcd 0000:00:1a.1: setting latency timer to 64
[ 4.465462] uhci_hcd 0000:00:1a.1: UHCI Host Controller
[ 4.465545] uhci_hcd 0000:00:1a.1: new USB bus registered, assigned
bus number 4
[ 4.465646] uhci_hcd 0000:00:1a.1: irq 21, io base 0x0000c400
[ 4.465776] usb usb4: configuration #1 chosen from 1 choice
[ 4.465863] hub 4-0:1.0: USB hub found
[ 4.465919] hub 4-0:1.0: 2 ports detected
[ 4.466075] uhci_hcd 0000:00:1d.0: PCI INT A -> GSI 23 (level, low)
-> IRQ 23
[ 4.466132] uhci_hcd 0000:00:1d.0: setting latency timer to 64
[ 4.466135] uhci_hcd 0000:00:1d.0: UHCI Host Controller
[ 4.466220] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned
bus number 5
[ 4.466317] uhci_hcd 0000:00:1d.0: irq 23, io base 0x0000c800
[ 4.466442] usb usb5: configuration #1 chosen from 1 choice
[ 4.466530] hub 5-0:1.0: USB hub found
[ 4.466585] hub 5-0:1.0: 2 ports detected
[ 4.466740] uhci_hcd 0000:00:1d.1: PCI INT B -> GSI 19 (level, low)
-> IRQ 19
[ 4.466798] uhci_hcd 0000:00:1d.1: setting latency timer to 64
[ 4.466800] uhci_hcd 0000:00:1d.1: UHCI Host Controller
[ 4.466883] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned
bus number 6
[ 4.466979] uhci_hcd 0000:00:1d.1: irq 19, io base 0x0000cc00
[ 4.467105] usb usb6: configuration #1 chosen from 1 choice
[ 4.467194] hub 6-0:1.0: USB hub found
[ 4.467249] hub 6-0:1.0: 2 ports detected
[ 4.467405] uhci_hcd 0000:00:1d.2: PCI INT C -> GSI 18 (level, low)
-> IRQ 18
[ 4.467462] uhci_hcd 0000:00:1d.2: setting latency timer to 64
[ 4.467465] uhci_hcd 0000:00:1d.2: UHCI Host Controller
[ 4.467549] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned
bus number 7
[ 4.467645] uhci_hcd 0000:00:1d.2: irq 18, io base 0x0000d000
[ 4.467772] usb usb7: configuration #1 chosen from 1 choice
[ 4.467859] hub 7-0:1.0: USB hub found
[ 4.467918] hub 7-0:1.0: 2 ports detected
[ 4.468096] initcall uhci_hcd_init+0x0/0xc5 returned 0 after 3353 usecs
[ 4.468151] calling usblp_init+0x0/0x1b @ 1
[ 4.468230] usbcore: registered new interface driver usblp
[ 4.468285] initcall usblp_init+0x0/0x1b returned 0 after 79 usecs
[ 4.468339] calling usb_stor_init+0x0/0x4c @ 1
[ 4.468392] Initializing USB Mass Storage driver...
[ 4.468482] usbcore: registered new interface driver usb-storage
[ 4.468536] USB Mass Storage support registered.
[ 4.468589] initcall usb_stor_init+0x0/0x4c returned 0 after 191 usecs
[ 4.468644] calling i8042_init+0x0/0x40b @ 1
[ 4.468757] PNP: PS/2 Controller [PNP0303:PS2K] at 0x60,0x64 irq 1
[ 4.468811] PNP: PS/2 appears to have AUX port disabled, if this is
incorrect please boot with i8042.nopnp
[ 4.468972] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 4.469029] initcall i8042_init+0x0/0x40b returned 0 after 323 usecs
[ 4.469085] calling mousedev_init+0x0/0x92 @ 1
[ 4.469204] mice: PS/2 mouse device common for all mice
[ 4.469258] initcall mousedev_init+0x0/0x92 returned 0 after 116 usecs
[ 4.469312] calling evdev_init+0x0/0x12 @ 1
[ 4.469365] initcall evdev_init+0x0/0x12 returned 0 after 0 usecs
[ 4.469419] calling atkbd_init+0x0/0x27 @ 1
[ 4.469497] initcall atkbd_init+0x0/0x27 returned 0 after 23 usecs
[ 4.469555] calling psmouse_init+0x0/0x73 @ 1
[ 4.469647] initcall psmouse_init+0x0/0x73 returned 0 after 38 usecs
[ 4.469702] calling raid0_init+0x0/0x12 @ 1
[ 4.469754] md: raid0 personality registered for level 0
[ 4.469808] initcall raid0_init+0x0/0x12 returned 0 after 52 usecs
[ 4.469862] calling init_ladder+0x0/0x12 @ 1
[ 4.469915] cpuidle: using governor ladder
[ 4.469968] initcall init_ladder+0x0/0x12 returned 0 after 51 usecs
[ 4.470022] calling init_menu+0x0/0x12 @ 1
[ 4.470074] cpuidle: using governor menu
[ 4.470127] initcall init_menu+0x0/0x12 returned 0 after 50 usecs
[ 4.470181] calling hid_init+0x0/0x70 @ 1
[ 4.470769] initcall hid_init+0x0/0x70 returned 0 after 35 usecs
[ 4.470830] calling a4_init+0x0/0x20 @ 1
[ 4.471924] initcall a4_init+0x0/0x20 returned 0 after 1011 usecs
[ 4.471926] calling apple_init+0x0/0x40 @ 1
[ 4.471970] initcall apple_init+0x0/0x40 returned 0 after 41 usecs
[ 4.471972] calling belkin_init+0x0/0x20 @ 1
[ 4.472424] initcall belkin_init+0x0/0x20 returned 0 after 439 usecs
[ 4.472426] calling bright_init+0x0/0x20 @ 1
[ 4.472462] initcall bright_init+0x0/0x20 returned 0 after 32 usecs
[ 4.472463] calling ch_init+0x0/0x20 @ 1
[ 4.472737] initcall ch_init+0x0/0x20 returned 0 after 265 usecs
[ 4.472791] calling ch_init+0x0/0x20 @ 1
[ 4.472869] initcall ch_init+0x0/0x20 returned 0 after 24 usecs
[ 4.472928] calling cp_init+0x0/0x20 @ 1
[ 4.473008] initcall cp_init+0x0/0x20 returned 0 after 26 usecs
[ 4.473062] calling dell_init+0x0/0x20 @ 1
[ 4.473139] initcall dell_init+0x0/0x20 returned 0 after 23 usecs
[ 4.473193] calling ez_init+0x0/0x20 @ 1
[ 4.473269] initcall ez_init+0x0/0x20 returned 0 after 23 usecs
[ 4.473323] calling gyration_init+0x0/0x20 @ 1
[ 4.473400] initcall gyration_init+0x0/0x20 returned 0 after 23 usecs
[ 4.473455] calling lg_init+0x0/0x20 @ 1
[ 4.473531] initcall lg_init+0x0/0x20 returned 0 after 23 usecs
[ 4.473585] calling ms_init+0x0/0x20 @ 1
[ 4.473662] initcall ms_init+0x0/0x20 returned 0 after 23 usecs
[ 4.473715] calling mr_init+0x0/0x20 @ 1
[ 4.473791] initcall mr_init+0x0/0x20 returned 0 after 22 usecs
[ 4.473845] calling pl_init+0x0/0x20 @ 1
[ 4.473926] initcall pl_init+0x0/0x20 returned 0 after 23 usecs
[ 4.473980] calling pl_init+0x0/0x20 @ 1
[ 4.474056] initcall pl_init+0x0/0x20 returned 0 after 23 usecs
[ 4.474110] calling samsung_init+0x0/0x20 @ 1
[ 4.474187] initcall samsung_init+0x0/0x20 returned 0 after 22 usecs
[ 4.474241] calling sony_init+0x0/0x20 @ 1
[ 4.474318] initcall sony_init+0x0/0x20 returned 0 after 23 usecs
[ 4.474372] calling sp_init+0x0/0x20 @ 1
[ 4.474448] initcall sp_init+0x0/0x20 returned 0 after 22 usecs
[ 4.474503] calling hid_init+0x0/0x92 @ 1
[ 4.474608] usbcore: registered new interface driver hiddev
[ 4.474690] usbcore: registered new interface driver usbhid
[ 4.474745] usbhid: v2.6:USB HID core driver
[ 4.474797] initcall hid_init+0x0/0x92 returned 0 after 236 usecs
[ 4.474851] calling init_soundcore+0x0/0x40 @ 1
[ 4.474928] initcall init_soundcore+0x0/0x40 returned 0 after 22 usecs
[ 4.474982] calling alsa_sound_init+0x0/0x88 @ 1
[ 4.475045] Advanced Linux Sound Architecture Driver Version 1.0.18rc3.
[ 4.475100] initcall alsa_sound_init+0x0/0x88 returned 0 after 63 usecs
[ 4.475154] calling alsa_timer_init+0x0/0x1fa @ 1
[ 4.475248] initcall alsa_timer_init+0x0/0x1fa returned 0 after 38 usecs
[ 4.475302] calling alsa_pcm_init+0x0/0x71 @ 1
[ 4.475356] initcall alsa_pcm_init+0x0/0x71 returned 0 after 1 usecs
[ 4.475410] calling snd_mem_init+0x0/0x2c @ 1
[ 4.475464] initcall snd_mem_init+0x0/0x2c returned 0 after 1 usecs
[ 4.475518] calling alsa_card_azx_init+0x0/0x1b @ 1
[ 4.475589] HDA Intel 0000:00:1b.0: PCI INT A -> GSI 22 (level, low)
-> IRQ 22
[ 4.475688] HDA Intel 0000:00:1b.0: setting latency timer to 64
[ 4.487609] input: AT Translated Set 2 keyboard as /class/input/input0
[ 4.541642] initcall alsa_card_azx_init+0x0/0x1b returned 0 after
64520 usecs
[ 4.541697] calling alsa_sound_last_init+0x0/0x7e @ 1
[ 4.541750] ALSA device list:
[ 4.541801] #0: HDA Intel at 0xf5200000 irq 22
[ 4.541853] initcall alsa_sound_last_init+0x0/0x7e returned 0 after
100 usecs
[ 4.541908] calling sysctl_core_init+0x0/0x25 @ 1
[ 4.541993] initcall sysctl_core_init+0x0/0x25 returned 0 after 30 usecs
[ 4.542047] calling llc_init+0x0/0x20 @ 1
[ 4.542100] initcall llc_init+0x0/0x20 returned 0 after 0 usecs
[ 4.542154] calling snap_init+0x0/0x33 @ 1
[ 4.542207] initcall snap_init+0x0/0x33 returned 0 after 0 usecs
[ 4.542261] calling nf_conntrack_standalone_init+0x0/0x12 @ 1
[ 4.542315] nf_conntrack version 0.5.0 (16384 buckets, 65536 max)
[ 4.542436] CONFIG_NF_CT_ACCT is deprecated and will be removed soon.
Please use
[ 4.542515] nf_conntrack.acct=1 kernel paramater, acct=1 nf_conntrack
module option or
[ 4.542594] sysctl net.netfilter.nf_conntrack_acct=1 to enable it.
[ 4.542676] initcall nf_conntrack_standalone_init+0x0/0x12 returned 0
after 353 usecs
[ 4.542756] calling xt_init+0x0/0xca @ 1
[ 4.542809] initcall xt_init+0x0/0xca returned 0 after 0 usecs
[ 4.542862] calling tcpudp_mt_init+0x0/0x20 @ 1
[ 4.542916] initcall tcpudp_mt_init+0x0/0x20 returned 0 after 1 usecs
[ 4.542970] calling sysctl_ipv4_init+0x0/0x53 @ 1
[ 4.543195] initcall sysctl_ipv4_init+0x0/0x53 returned 0 after 168 usecs
[ 4.543251] calling ipv4_netfilter_init+0x0/0x20 @ 1
[ 4.543305] initcall ipv4_netfilter_init+0x0/0x20 returned 0 after 0
usecs
[ 4.543360] calling nf_conntrack_l3proto_ipv4_init+0x0/0x15b @ 1
[ 4.543553] initcall nf_conntrack_l3proto_ipv4_init+0x0/0x15b
returned 0 after 135 usecs
[ 4.543633] calling nf_nat_init+0x0/0x10f @ 1
[ 4.543721] initcall nf_nat_init+0x0/0x10f returned 0 after 34 usecs
[ 4.543775] calling nf_defrag_init+0x0/0x17 @ 1
[ 4.543828] initcall nf_defrag_init+0x0/0x17 returned 0 after 0 usecs
[ 4.543883] calling nf_nat_snmp_basic_init+0x0/0x44 @ 1
[ 4.543936] initcall nf_nat_snmp_basic_init+0x0/0x44 returned 0 after
0 usecs
[ 4.543991] calling ip_tables_init+0x0/0xae @ 1
[ 4.544057] ip_tables: (C) 2000-2006 Netfilter Core Team
[ 4.544111] initcall ip_tables_init+0x0/0xae returned 0 after 55 usecs
[ 4.544165] calling nf_nat_standalone_init+0x0/0x5e @ 1
[ 4.544223] initcall nf_nat_standalone_init+0x0/0x5e returned 0 after
4 usecs
[ 4.544278] calling masquerade_tg_init+0x0/0x3c @ 1
[ 4.544333] initcall masquerade_tg_init+0x0/0x3c returned 0 after 1 usecs
[ 4.544387] calling netmap_tg_init+0x0/0x12 @ 1
[ 4.544440] initcall netmap_tg_init+0x0/0x12 returned 0 after 0 usecs
[ 4.544495] calling redirect_tg_init+0x0/0x12 @ 1
[ 4.544548] initcall redirect_tg_init+0x0/0x12 returned 0 after 0 usecs
[ 4.544603] calling cubictcp_register+0x0/0x6f @ 1
[ 4.544656] TCP cubic registered
[ 4.544708] initcall cubictcp_register+0x0/0x6f returned 0 after 50 usecs
[ 4.544763] calling packet_init+0x0/0x4a @ 1
[ 4.544816] NET: Registered protocol family 17
[ 4.544870] initcall packet_init+0x0/0x4a returned 0 after 53 usecs
[ 4.544924] calling br_init+0x0/0xd6 @ 1
[ 4.545002] Bridge firewalling registered
[ 4.545055] initcall br_init+0x0/0xd6 returned 0 after 77 usecs
[ 4.545109] calling init_sunrpc+0x0/0x72 @ 1
[ 4.545256] RPC: Registered udp transport module.
[ 4.545309] RPC: Registered tcp transport module.
[ 4.545363] initcall init_sunrpc+0x0/0x72 returned 0 after 193 usecs
[ 4.545418] calling hpet_insert_resource+0x0/0x23 @ 1
[ 4.545472] initcall hpet_insert_resource+0x0/0x23 returned 0 after 0
usecs
[ 4.545528] calling update_mp_table+0x0/0x6bc @ 1
[ 4.545581] initcall update_mp_table+0x0/0x6bc returned 0 after 0 usecs
[ 4.545636] calling lapic_insert_resource+0x0/0x42 @ 1
[ 4.545690] initcall lapic_insert_resource+0x0/0x42 returned 0 after
0 usecs
[ 4.545745] calling init_lapic_nmi_sysfs+0x0/0x39 @ 1
[ 4.545799] initcall init_lapic_nmi_sysfs+0x0/0x39 returned 0 after 0
usecs
[ 4.545854] calling ioapic_insert_resources+0x0/0x58 @ 1
[ 4.545907] initcall ioapic_insert_resources+0x0/0x58 returned 0
after 0 usecs
[ 4.545987] calling io_apic_bug_finalize+0x0/0x1b @ 1
[ 4.546040] initcall io_apic_bug_finalize+0x0/0x1b returned 0 after 0
usecs
[ 4.546095] calling check_early_ioremap_leak+0x0/0x6f @ 1
[ 4.546149] initcall check_early_ioremap_leak+0x0/0x6f returned 0
after 0 usecs
[ 4.546228] calling sched_init_debug+0x0/0x24 @ 1
[ 4.546284] initcall sched_init_debug+0x0/0x24 returned 0 after 3 usecs
[ 4.546340] calling init_oops_id+0x0/0x30 @ 1
[ 4.546395] initcall init_oops_id+0x0/0x30 returned 0 after 1 usecs
[ 4.546449] calling disable_boot_consoles+0x0/0x3a @ 1
[ 4.546502] initcall disable_boot_consoles+0x0/0x3a returned 0 after
0 usecs
[ 4.546557] calling pm_qos_power_init+0x0/0xe5 @ 1
[ 4.546714] initcall pm_qos_power_init+0x0/0xe5 returned 0 after 97 usecs
[ 4.546769] calling random32_reseed+0x0/0xa5 @ 1
[ 4.546829] initcall random32_reseed+0x0/0xa5 returned 0 after 6 usecs
[ 4.546883] calling pci_sysfs_init+0x0/0x55 @ 1
[ 4.547008] initcall pci_sysfs_init+0x0/0x55 returned 0 after 71 usecs
[ 4.547063] calling acpi_wakeup_device_init+0x0/0xa0 @ 1
[ 4.547119] initcall acpi_wakeup_device_init+0x0/0xa0 returned 0
after 1 usecs
[ 4.547198] calling seqgen_init+0x0/0xf @ 1
[ 4.547257] initcall seqgen_init+0x0/0xf returned 0 after 7 usecs
[ 4.547313] calling scsi_complete_async_scans+0x0/0x120 @ 1
[ 4.547367] initcall scsi_complete_async_scans+0x0/0x120 returned 0
after 0 usecs
[ 4.547446] calling memmap_init+0x0/0xa5 @ 1
[ 4.547520] initcall memmap_init+0x0/0xa5 returned 0 after 20 usecs
[ 4.547574] calling pci_mmcfg_late_insert_resources+0x0/0x14f @ 1
[ 4.547630] initcall pci_mmcfg_late_insert_resources+0x0/0x14f
returned 0 after 1 usecs
[ 4.547709] calling tcp_congestion_default+0x0/0x12 @ 1
[ 4.547763] initcall tcp_congestion_default+0x0/0x12 returned 0 after
0 usecs
[ 4.547820] Freeing unused kernel memory: 336k freed
[ 4.602655] calling fuse_init+0x0/0x152 [fuse] @ 1236
[ 4.602710] fuse init (API version 7.10)
[ 4.602852] initcall fuse_init+0x0/0x152 [fuse] returned 0 after 136
usecs
[ 4.608283] calling acpi_processor_init+0x0/0x10a [processor] @ 1244
[ 4.608433] processor ACPI_CPU:00: registered as cooling_device0
[ 4.608488] ACPI: Processor [CPU0] (supports 8 throttling states)
[ 4.608735] ACPI: SSDT CFEE8B40, 0087 (r1 PmRef Cpu1Ist 3000
INTL 20040311)
[ 4.609033] processor ACPI_CPU:01: registered as cooling_device1
[ 4.609089] ACPI: Processor [CPU1] (supports 8 throttling states)
[ 4.609271] initcall acpi_processor_init+0x0/0x10a [processor]
returned 0 after 907 usecs
[ 4.610357] calling acpi_thermal_init+0x0/0x83 [thermal] @ 1244
[ 4.610946] initcall acpi_thermal_init+0x0/0x83 [thermal] returned 0
after 34 usecs
[ 4.825039] usb 2-5: new high speed USB device using ehci_hcd and
address 2
[ 4.874748] calling generic_ide_init+0x0/0x20 [ide_pci_generic] @ 2343
[ 4.874828] initcall generic_ide_init+0x0/0x20 [ide_pci_generic]
returned 0 after 21 usecs
[ 4.883642] calling sky2_init_module+0x0/0x5c [sky2] @ 2358
[ 4.883698] sky2 driver version 1.22
[ 4.883780] sky2 0000:04:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 4.883842] sky2 0000:04:00.0: setting latency timer to 64
[ 4.883866] sky2 0000:04:00.0: Yukon-2 EC chip revision 2
[ 4.895898] calling init_sd+0x0/0x105 [sd_mod] @ 2384
[ 4.895965] Driver 'sd' needs updating - please use bus_type methods
[ 4.896082] sd 0:0:0:0: [sda] 976771055 512-byte hardware sectors:
(500 GB/465 GiB)
[ 4.896170] sd 0:0:0:0: [sda] Write Protect is off
[ 4.896223] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 4.896238] sd 0:0:0:0: [sda] Write cache: enabled, read cache:
enabled, doesn't support DPO or FUA
[ 4.896361] sd 0:0:0:0: [sda] 976771055 512-byte hardware sectors:
(500 GB/465 GiB)
[ 4.896448] sd 0:0:0:0: [sda] Write Protect is off
[ 4.896500] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 4.896515] sd 0:0:0:0: [sda] Write cache: enabled, read cache:
enabled, doesn't support DPO or FUA
[ 4.896597] sda: sda1 sda3 <<6>sky2 0000:04:00.0: Marvell Yukon
88E8053 Gigabit Ethernet Controller
[ 4.915925] Part Number: Yukon 88E8053
[ 4.915926] Engineering Level: Rev. 2.2
[ 4.915927] Manufacturer: Marvell
[ 4.916923] sky2 0000:04:00.0: irq 315 for MSI/MSI-X
[ 4.917188] sky2 eth0: addr 00:1a:4d:40:12:9e
[ 4.917258] initcall sky2_init_module+0x0/0x5c [sky2] returned 0
after 32763 usecs
[ 4.925942] sda5 sda6 sda7 >
[ 4.942004] sd 0:0:0:0: [sda] Attached SCSI disk
[ 4.942073] initcall init_sd+0x0/0x105 [sd_mod] returned 0 after
45028 usecs
[ 4.957554] usb 2-5: configuration #1 chosen from 1 choice
[ 4.957845] hub 2-5:1.0: USB hub found
[ 4.958198] hub 2-5:1.0: 2 ports detected
[ 5.006479] md: md1 stopped.
[ 5.252033] usb 3-2: new low speed USB device using uhci_hcd and
address 2
[ 5.449210] usb 3-2: configuration #1 chosen from 1 choice
[ 5.635057] md: bind<hdb12>
[ 5.635127] md: could not bd_claim hdb.
[ 5.635181] md: md_import_device returned -16
[ 5.662483] md: md1 stopped.
[ 5.662544] md: unbind<hdb12>
[ 5.669240] md: export_rdev(hdb12)
[ 5.689619] md: bind<hdb12>
[ 5.689856] md: bind<sda1>
[ 5.691099] md1: setting max_sectors to 128, segment boundary to 32767
[ 5.691155] raid0: looking at sda1
[ 5.691206] raid0: comparing sda1(31455168) with sda1(31455168)
[ 5.691284] raid0: END
[ 5.691334] raid0: ==> UNIQUE
[ 5.691385] raid0: 1 zones
[ 5.691435] raid0: looking at hdb12
[ 5.691487] raid0: comparing hdb12(31455168) with sda1(31455168)
[ 5.691564] raid0: EQUAL
[ 5.691615] raid0: FINAL 1 zones
[ 5.691666] raid0: done.
[ 5.691716] raid0 : md_size is 62910336 blocks.
[ 5.691768] raid0 : conf->hash_spacing is 62910336 blocks.
[ 5.691821] raid0 : nb_zone is 1.
[ 5.691872] raid0 : Allocating 8 bytes for hash.
[ 5.692130] md1: unknown partition table
[ 5.808535] kjournald starting. Commit interval 5 seconds
[ 5.808541] EXT3-fs: mounted filesystem with ordered data mode.
[ 5.852194] generic-usb 0003:051D:0002.0001: hiddev96: USB HID v1.10
Device [APC Back-UPS ES 750 FW:819.z3.D USB FW:z3] on
usb-0000:00:1a.0-2/input0
[ 6.096053] usb 7-2: new low speed USB device using uhci_hcd and
address 2
[ 6.278889] usb 7-2: configuration #1 chosen from 1 choice
[ 6.297092] input: Microsoft Microsoft 5-Button Mouse with
IntelliEye(TM) as /class/input/input1
[ 6.324083] generic-usb 0003:045E:0039.0002: input: USB HID v1.10
Mouse [Microsoft Microsoft 5-Button Mouse with IntelliEye(TM)] on
usb-0000:00:1d.2-2/input0
[ 10.587231] udevd version 124 started
[ 12.107446] nvidia: module license 'NVIDIA' taints kernel.
[ 12.110547] calling nvidia_init_module+0x0/0x94d [nvidia] @ 3652
[ 12.360176] nvidia 0000:01:00.0: PCI INT A -> GSI 16 (level, low) ->
IRQ 16
[ 12.360241] nvidia 0000:01:00.0: setting latency timer to 64
[ 12.360943] NVRM: loading NVIDIA UNIX x86_64 Kernel Module 180.25
Sat Jan 24 18:19:10 PST 2009
[ 12.362441] initcall nvidia_init_module+0x0/0x94d [nvidia] returned 0
after 245842 usecs
[ 12.371453] calling ssb_modinit+0x0/0x9a [ssb] @ 3758
[ 12.371547] b43-pci-bridge 0000:05:01.0: PCI INT A -> GSI 19 (level,
low) -> IRQ 19
[ 12.432088] ssb: Sonics Silicon Backplane found on PCI device
0000:05:01.0
[ 12.432185] initcall ssb_modinit+0x0/0x9a [ssb] returned 0 after
59244 usecs
[ 12.479294] calling ieee80211_init+0x0/0x22 [mac80211] @ 3839
[ 12.479446] initcall ieee80211_init+0x0/0x22 [mac80211] returned 0
after 68 usecs
[ 12.522570] calling b43_init+0x0/0x60 [b43] @ 3839
[ 12.522719] b43-phy0: Broadcom 4318 WLAN found
[ 12.564028] b43-phy0 debug: Found PHY: Analog 3, Type 2, Revision 7
[ 12.564036] b43-phy0 debug: Found Radio: Manuf 0x17F, Version 0x2050,
Revision 8
[ 12.588505] phy0: Selected rate control algorithm 'pid'
[ 12.590091] Broadcom 43xx driver loaded [ Features: PL, Firmware-ID:
FW13 ]
[ 12.590152] initcall b43_init+0x0/0x60 [b43] returned 0 after 65931 usecs
[ 13.525771] Adding 2096440k swap on /dev/hdb5. Priority:-1 extents:1
across:2096440k
[ 13.880158] EXT3 FS on hdb13, internal journal
[ 15.451662] kjournald starting. Commit interval 5 seconds
[ 15.451851] EXT3 FS on sda7, internal journal
[ 15.451855] EXT3-fs: mounted filesystem with writeback data mode.
[ 15.485883] kjournald starting. Commit interval 5 seconds
[ 15.486109] EXT3 FS on hdb11, internal journal
[ 15.486112] EXT3-fs: mounted filesystem with ordered data mode.
[ 15.530957] kjournald starting. Commit interval 5 seconds
[ 15.531208] EXT3 FS on hdb8, internal journal
[ 15.531212] EXT3-fs: mounted filesystem with ordered data mode.
[ 15.551380] EXT4-fs: barriers enabled
[ 15.568494] kjournald2 starting. Commit interval 5 seconds
[ 15.568630] EXT4 FS on md1, internal journal on md1:8
[ 15.568632] EXT4-fs: delayed allocation enabled
[ 15.568634] EXT4-fs: file extents enabled
[ 15.568770] EXT4-fs: mballoc enabled
[ 15.568772] EXT4-fs: mounted filesystem with ordered data mode.
[ 16.016042] b43 ssb0:0: firmware: requesting b43/ucode5.fw
[ 16.050035] b43 ssb0:0: firmware: requesting b43/pcm5.fw
[ 16.055522] b43 ssb0:0: firmware: requesting b43/b0g0initvals5.fw
[ 16.057357] b43 ssb0:0: firmware: requesting b43/b0g0bsinitvals5.fw
[ 16.172053] b43-phy0: Loading firmware version 410.2160 (2007-05-26
15:32:10)
[ 16.192065] b43-phy0 debug: Chip initialized
[ 16.192208] b43-phy0 debug: 32-bit DMA initialized
[ 16.212403] Registered led device: b43-phy0::tx
[ 16.212416] Registered led device: b43-phy0::rx
[ 16.212441] b43-phy0 debug: Wireless interface started
[ 16.244043] b43-phy0 debug: Adding Interface type 2
[ 16.256649] phy0: HW CONFIG: freq=2412
[ 16.256682] b43-phy0: Radio turned on by software
[ 16.288090] b43-phy0 debug: Using hardware based encryption for
keyidx: 0, mac: ff:ff:ff:ff:ff:ff
[ 16.308050] phy0: HW CONFIG: freq=2412
[ 16.532051] phy0: HW CONFIG: freq=2417
[ 16.772031] phy0: HW CONFIG: freq=2422
[ 17.012035] phy0: HW CONFIG: freq=2427
[ 17.252049] phy0: HW CONFIG: freq=2432
[ 17.492054] phy0: HW CONFIG: freq=2437
[ 17.623994] calling cpufreq_gov_userspace_init+0x0/0x12
[cpufreq_userspace] @ 4688
[ 17.623998] initcall cpufreq_gov_userspace_init+0x0/0x12
[cpufreq_userspace] returned 0 after 0 usecs
[ 17.668941] calling acpi_cpufreq_init+0x0/0x6d [acpi_cpufreq] @ 4711
[ 17.669181] initcall acpi_cpufreq_init+0x0/0x6d [acpi_cpufreq]
returned 0 after 232 usecs
[ 17.732019] phy0: HW CONFIG: freq=2442
[ 17.972009] phy0: HW CONFIG: freq=2447
[ 18.212010] phy0: HW CONFIG: freq=2452
[ 18.447404] warning: `avahi-daemon' uses 32-bit capabilities (legacy
support in use)
[ 18.452013] phy0: HW CONFIG: freq=2457
[ 18.692009] phy0: HW CONFIG: freq=2462
[ 18.932015] phy0: HW CONFIG: freq=2412
[ 18.972018] phy0: HW CONFIG: freq=2412
[ 19.200012] phy0: HW CONFIG: freq=2417
[ 19.440011] phy0: HW CONFIG: freq=2422
[ 19.680014] phy0: HW CONFIG: freq=2427
[ 19.924010] phy0: HW CONFIG: freq=2432
[ 20.160018] phy0: HW CONFIG: freq=2437
[ 20.400012] phy0: HW CONFIG: freq=2442
[ 20.641667] phy0: HW CONFIG: freq=2447
[ 20.880010] phy0: HW CONFIG: freq=2452
[ 21.120012] phy0: HW CONFIG: freq=2457
[ 21.360011] phy0: HW CONFIG: freq=2462
[ 21.600016] phy0: HW CONFIG: freq=2412
[ 21.611261] calling VBoxDrvLinuxInit+0x0/0x1b8 [vboxdrv] @ 5406
[ 21.611264] vboxdrv: Trying to deactivate the NMI watchdog permanently...
[ 21.611267] vboxdrv: Successfully done.
[ 21.611268] vboxdrv: Found 2 processor cores.
[ 21.611362] VBoxDrv: dbg - g_abExecMemory=ffffffffa088e9c0
[ 21.611382] vboxdrv: fAsync=0 offMin=0x3de offMax=0xbe0
[ 21.611421] vboxdrv: TSC mode is 'synchronous', kernel timer mode is
'normal'.
[ 21.611423] vboxdrv: Successfully loaded version 2.1.2 (interface
0x000a0009).
[ 21.611430] initcall VBoxDrvLinuxInit+0x0/0x1b8 [vboxdrv] returned 0
after 157 usecs
[ 21.818568] calling VBoxNetFltLinuxInit+0x0/0x121 [vboxnetflt] @ 5414
[ 21.818573] VBoxNetFlt: dbg - g_abExecMemory=ffffffffa0a2b840
[ 21.818584] initcall VBoxNetFltLinuxInit+0x0/0x121 [vboxnetflt]
returned 0 after 8 usecs
[ 23.896010] phy0: HW CONFIG: freq=2412
[ 24.120011] phy0: HW CONFIG: freq=2417
[ 24.360011] phy0: HW CONFIG: freq=2422
[ 24.600012] phy0: HW CONFIG: freq=2427
[ 24.840014] phy0: HW CONFIG: freq=2432
[ 25.080012] phy0: HW CONFIG: freq=2437
[ 25.320009] phy0: HW CONFIG: freq=2442
[ 25.561009] phy0: HW CONFIG: freq=2447
[ 25.808012] phy0: HW CONFIG: freq=2452
[ 26.048011] phy0: HW CONFIG: freq=2457
[ 26.292010] phy0: HW CONFIG: freq=2462
[ 26.532022] phy0: HW CONFIG: freq=2412
[ 27.866700] sky2 eth0: enabling interface
[ 29.688635] sky2 eth0: Link is up at 100 Mbps, full duplex, flow
control both
[ 179.768013] b43-phy0 debug: Disabling hardware based encryption for
keyidx: 0, mac: ff:ff:ff:ff:ff:ff
[ 179.768018] b43-phy0 debug: Removing Interface type 2
[ 179.781762] b43-phy0 debug: Wireless interface stopped
[ 179.781930] b43-phy0 debug: DMA-32 rx_ring: Used slots 1/64, Failed
frames 0/0 = 0.0%, Average tries 0.00
[ 179.782083] b43-phy0 debug: DMA-32 tx_ring_AC_BK: Used slots 0/128,
Failed frames 0/0 = 0.0%, Average tries 0.00
[ 179.788013] b43-phy0 debug: DMA-32 tx_ring_AC_BE: Used slots 0/128,
Failed frames 0/0 = 0.0%, Average tries 0.00
[ 179.796009] b43-phy0 debug: DMA-32 tx_ring_AC_VI: Used slots 0/128,
Failed frames 0/0 = 0.0%, Average tries 0.00
[ 179.804008] b43-phy0 debug: DMA-32 tx_ring_AC_VO: Used slots 0/128,
Failed frames 0/0 = 0.0%, Average tries 0.00
[ 179.812008] b43-phy0 debug: DMA-32 tx_ring_mcast: Used slots 0/128,
Failed frames 0/0 = 0.0%, Average tries 0.00
[ 180.020016] b43-phy0: Loading firmware version 410.2160 (2007-05-26
15:32:10)
[ 180.036036] b43-phy0 debug: Chip initialized
[ 180.036142] b43-phy0 debug: 32-bit DMA initialized
[ 180.056406] Registered led device: b43-phy0::tx
[ 180.056425] Registered led device: b43-phy0::rx
[ 180.056452] b43-phy0 debug: Wireless interface started
[ 180.092024] b43-phy0 debug: Adding Interface type 2
[ 180.104866] phy0: HW CONFIG: freq=2412
[ 180.108646] phy0: HW CONFIG: freq=2412
[ 180.124428] wlan0: direct probe to AP 00:1f:33:31:40:fc try 1
[ 180.124451] phy0: HW CONFIG: freq=2412
[ 180.124605] wlan0: direct probe to AP 00:1f:33:31:40:fc try 1
[ 180.124650] b43-phy0 debug: Using hardware based encryption for
keyidx: 0, mac: ff:ff:ff:ff:ff:ff
[ 180.246870] wlan0 direct probe responded
[ 180.246875] wlan0: authenticate with AP 00:1f:33:31:40:fc
[ 180.280024] wlan0: authenticated
[ 180.280028] wlan0: associate with AP 00:1f:33:31:40:fc
[ 180.364305] wlan0: RX AssocResp from 00:1f:33:31:40:fc (capab=0x411
status=0 aid=2)
[ 180.364308] wlan0: associated
[ 180.364312] phy0: Allocated STA 00:1f:33:31:40:fc
[ 180.364316] phy0: Inserted STA 00:1f:33:31:40:fc
kernel config
#
# Automatically generated make config: don't edit
# Linux kernel version: 2.6.28.3-090210-1343
# Tue Feb 10 13:44:54 2009
#
CONFIG_64BIT=y
# CONFIG_X86_32 is not set
CONFIG_X86_64=y
CONFIG_X86=y
CONFIG_ARCH_DEFCONFIG="arch/x86/configs/x86_64_defconfig"
CONFIG_GENERIC_TIME=y
CONFIG_GENERIC_CMOS_UPDATE=y
CONFIG_CLOCKSOURCE_WATCHDOG=y
CONFIG_GENERIC_CLOCKEVENTS=y
CONFIG_GENERIC_CLOCKEVENTS_BROADCAST=y
CONFIG_LOCKDEP_SUPPORT=y
CONFIG_STACKTRACE_SUPPORT=y
CONFIG_HAVE_LATENCYTOP_SUPPORT=y
CONFIG_FAST_CMPXCHG_LOCAL=y
CONFIG_MMU=y
CONFIG_ZONE_DMA=y
CONFIG_GENERIC_ISA_DMA=y
CONFIG_GENERIC_IOMAP=y
CONFIG_GENERIC_BUG=y
CONFIG_GENERIC_HWEIGHT=y
CONFIG_ARCH_MAY_HAVE_PC_FDC=y
CONFIG_RWSEM_GENERIC_SPINLOCK=y
# CONFIG_RWSEM_XCHGADD_ALGORITHM is not set
CONFIG_ARCH_HAS_CPU_IDLE_WAIT=y
CONFIG_GENERIC_CALIBRATE_DELAY=y
CONFIG_GENERIC_TIME_VSYSCALL=y
CONFIG_ARCH_HAS_CPU_RELAX=y
CONFIG_ARCH_HAS_DEFAULT_IDLE=y
CONFIG_ARCH_HAS_CACHE_LINE_SIZE=y
CONFIG_HAVE_SETUP_PER_CPU_AREA=y
CONFIG_HAVE_CPUMASK_OF_CPU_MAP=y
CONFIG_ARCH_HIBERNATION_POSSIBLE=y
CONFIG_ARCH_SUSPEND_POSSIBLE=y
CONFIG_ZONE_DMA32=y
CONFIG_ARCH_POPULATES_NODE_MAP=y
CONFIG_AUDIT_ARCH=y
CONFIG_ARCH_SUPPORTS_OPTIMIZED_INLINING=y
CONFIG_GENERIC_HARDIRQS=y
CONFIG_GENERIC_IRQ_PROBE=y
CONFIG_GENERIC_PENDING_IRQ=y
CONFIG_X86_SMP=y
CONFIG_USE_GENERIC_SMP_HELPERS=y
CONFIG_X86_64_SMP=y
CONFIG_X86_HT=y
CONFIG_X86_BIOS_REBOOT=y
CONFIG_X86_TRAMPOLINE=y
# CONFIG_KTIME_SCALAR is not set
CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
#
# General setup
#
CONFIG_EXPERIMENTAL=y
CONFIG_LOCK_KERNEL=y
CONFIG_INIT_ENV_ARG_LIMIT=32
CONFIG_LOCALVERSION=""
# CONFIG_LOCALVERSION_AUTO is not set
CONFIG_SWAP=y
CONFIG_SYSVIPC=y
CONFIG_SYSVIPC_SYSCTL=y
# CONFIG_POSIX_MQUEUE is not set
CONFIG_BSD_PROCESS_ACCT=y
CONFIG_BSD_PROCESS_ACCT_V3=y
# CONFIG_TASKSTATS is not set
# CONFIG_AUDIT is not set
CONFIG_IKCONFIG=y
CONFIG_IKCONFIG_PROC=y
CONFIG_LOG_BUF_SHIFT=18
# CONFIG_CGROUPS is not set
CONFIG_HAVE_UNSTABLE_SCHED_CLOCK=y
# CONFIG_GROUP_SCHED is not set
CONFIG_SYSFS_DEPRECATED=y
CONFIG_SYSFS_DEPRECATED_V2=y
# CONFIG_RELAY is not set
CONFIG_NAMESPACES=y
# CONFIG_UTS_NS is not set
# CONFIG_IPC_NS is not set
# CONFIG_USER_NS is not set
# CONFIG_PID_NS is not set
CONFIG_BLK_DEV_INITRD=y
CONFIG_INITRAMFS_SOURCE=""
# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
CONFIG_SYSCTL=y
# CONFIG_EMBEDDED is not set
CONFIG_UID16=y
CONFIG_SYSCTL_SYSCALL=y
CONFIG_KALLSYMS=y
CONFIG_KALLSYMS_ALL=y
# CONFIG_KALLSYMS_EXTRA_PASS is not set
CONFIG_HOTPLUG=y
CONFIG_PRINTK=y
CONFIG_BUG=y
CONFIG_ELF_CORE=y
CONFIG_PCSPKR_PLATFORM=y
CONFIG_COMPAT_BRK=y
CONFIG_BASE_FULL=y
CONFIG_FUTEX=y
CONFIG_ANON_INODES=y
CONFIG_EPOLL=y
CONFIG_SIGNALFD=y
CONFIG_TIMERFD=y
CONFIG_EVENTFD=y
CONFIG_SHMEM=y
CONFIG_AIO=y
CONFIG_VM_EVENT_COUNTERS=y
CONFIG_PCI_QUIRKS=y
CONFIG_SLAB=y
# CONFIG_SLUB is not set
# CONFIG_SLOB is not set
# CONFIG_PROFILING is not set
# CONFIG_MARKERS is not set
CONFIG_HAVE_OPROFILE=y
# CONFIG_KPROBES is not set
CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS=y
CONFIG_HAVE_IOREMAP_PROT=y
CONFIG_HAVE_KPROBES=y
CONFIG_HAVE_KRETPROBES=y
CONFIG_HAVE_ARCH_TRACEHOOK=y
# CONFIG_HAVE_GENERIC_DMA_COHERENT is not set
CONFIG_SLABINFO=y
CONFIG_RT_MUTEXES=y
# CONFIG_TINY_SHMEM is not set
CONFIG_BASE_SMALL=0
CONFIG_MODULES=y
# CONFIG_MODULE_FORCE_LOAD is not set
CONFIG_MODULE_UNLOAD=y
# CONFIG_MODULE_FORCE_UNLOAD is not set
CONFIG_MODVERSIONS=y
# CONFIG_MODULE_SRCVERSION_ALL is not set
CONFIG_KMOD=y
CONFIG_STOP_MACHINE=y
CONFIG_BLOCK=y
# CONFIG_BLK_DEV_IO_TRACE is not set
# CONFIG_BLK_DEV_BSG is not set
# CONFIG_BLK_DEV_INTEGRITY is not set
CONFIG_BLOCK_COMPAT=y
#
# IO Schedulers
#
CONFIG_IOSCHED_NOOP=y
# CONFIG_IOSCHED_AS is not set
CONFIG_IOSCHED_DEADLINE=y
CONFIG_IOSCHED_CFQ=y
# CONFIG_DEFAULT_AS is not set
# CONFIG_DEFAULT_DEADLINE is not set
CONFIG_DEFAULT_CFQ=y
# CONFIG_DEFAULT_NOOP is not set
CONFIG_DEFAULT_IOSCHED="cfq"
CONFIG_PREEMPT_NOTIFIERS=y
CONFIG_CLASSIC_RCU=y
# CONFIG_FREEZER is not set
#
# Processor type and features
#
CONFIG_TICK_ONESHOT=y
CONFIG_NO_HZ=y
CONFIG_HIGH_RES_TIMERS=y
CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
CONFIG_SMP=y
CONFIG_X86_FIND_SMP_CONFIG=y
CONFIG_X86_MPPARSE=y
CONFIG_X86_PC=y
# CONFIG_X86_ELAN is not set
# CONFIG_X86_VOYAGER is not set
# CONFIG_X86_GENERICARCH is not set
# CONFIG_X86_VSMP is not set
CONFIG_PARAVIRT_GUEST=y
# CONFIG_XEN is not set
# CONFIG_KVM_CLOCK is not set
# CONFIG_KVM_GUEST is not set
# CONFIG_PARAVIRT is not set
# CONFIG_PARAVIRT_CLOCK is not set
# CONFIG_MEMTEST is not set
# CONFIG_M386 is not set
# CONFIG_M486 is not set
# CONFIG_M586 is not set
# CONFIG_M586TSC is not set
# CONFIG_M586MMX is not set
# CONFIG_M686 is not set
# CONFIG_MPENTIUMII is not set
# CONFIG_MPENTIUMIII is not set
# CONFIG_MPENTIUMM is not set
# CONFIG_MPENTIUM4 is not set
# CONFIG_MK6 is not set
# CONFIG_MK7 is not set
# CONFIG_MK8 is not set
# CONFIG_MCRUSOE is not set
# CONFIG_MEFFICEON is not set
# CONFIG_MWINCHIPC6 is not set
# CONFIG_MWINCHIP3D is not set
# CONFIG_MGEODEGX1 is not set
# CONFIG_MGEODE_LX is not set
# CONFIG_MCYRIXIII is not set
# CONFIG_MVIAC3_2 is not set
# CONFIG_MVIAC7 is not set
# CONFIG_MPSC is not set
CONFIG_MCORE2=y
# CONFIG_GENERIC_CPU is not set
CONFIG_X86_CPU=y
CONFIG_X86_L1_CACHE_BYTES=64
CONFIG_X86_INTERNODE_CACHE_BYTES=64
CONFIG_X86_CMPXCHG=y
CONFIG_X86_L1_CACHE_SHIFT=6
CONFIG_X86_WP_WORKS_OK=y
CONFIG_X86_INTEL_USERCOPY=y
CONFIG_X86_USE_PPRO_CHECKSUM=y
CONFIG_X86_P6_NOP=y
CONFIG_X86_TSC=y
CONFIG_X86_CMPXCHG64=y
CONFIG_X86_CMOV=y
CONFIG_X86_MINIMUM_CPU_FAMILY=64
CONFIG_X86_DEBUGCTLMSR=y
CONFIG_CPU_SUP_INTEL=y
CONFIG_CPU_SUP_AMD=y
CONFIG_CPU_SUP_CENTAUR_64=y
# CONFIG_X86_DS is not set
CONFIG_HPET_TIMER=y
CONFIG_HPET_EMULATE_RTC=y
CONFIG_DMI=y
CONFIG_GART_IOMMU=y
# CONFIG_CALGARY_IOMMU is not set
# CONFIG_AMD_IOMMU is not set
CONFIG_SWIOTLB=y
CONFIG_IOMMU_HELPER=y
CONFIG_NR_CPUS=2
# CONFIG_SCHED_SMT is not set
CONFIG_SCHED_MC=y
# CONFIG_PREEMPT_NONE is not set
CONFIG_PREEMPT_VOLUNTARY=y
# CONFIG_PREEMPT is not set
CONFIG_X86_LOCAL_APIC=y
CONFIG_X86_IO_APIC=y
CONFIG_X86_MCE=y
CONFIG_X86_MCE_INTEL=y
# CONFIG_X86_MCE_AMD is not set
# CONFIG_I8K is not set
# CONFIG_MICROCODE is not set
CONFIG_X86_MSR=y
CONFIG_X86_CPUID=y
CONFIG_ARCH_PHYS_ADDR_T_64BIT=y
# CONFIG_NUMA is not set
CONFIG_ARCH_SPARSEMEM_DEFAULT=y
CONFIG_ARCH_SPARSEMEM_ENABLE=y
CONFIG_ARCH_SELECT_MEMORY_MODEL=y
CONFIG_SELECT_MEMORY_MODEL=y
# CONFIG_FLATMEM_MANUAL is not set
# CONFIG_DISCONTIGMEM_MANUAL is not set
CONFIG_SPARSEMEM_MANUAL=y
CONFIG_SPARSEMEM=y
CONFIG_HAVE_MEMORY_PRESENT=y
CONFIG_SPARSEMEM_EXTREME=y
CONFIG_SPARSEMEM_VMEMMAP_ENABLE=y
CONFIG_SPARSEMEM_VMEMMAP=y
# CONFIG_MEMORY_HOTPLUG is not set
CONFIG_PAGEFLAGS_EXTENDED=y
CONFIG_SPLIT_PTLOCK_CPUS=4
CONFIG_RESOURCES_64BIT=y
CONFIG_PHYS_ADDR_T_64BIT=y
CONFIG_ZONE_DMA_FLAG=1
CONFIG_BOUNCE=y
CONFIG_VIRT_TO_BUS=y
CONFIG_UNEVICTABLE_LRU=y
CONFIG_MMU_NOTIFIER=y
# CONFIG_X86_CHECK_BIOS_CORRUPTION is not set
CONFIG_X86_RESERVE_LOW_64K=y
CONFIG_MTRR=y
# CONFIG_MTRR_SANITIZER is not set
# CONFIG_X86_PAT is not set
# CONFIG_EFI is not set
CONFIG_SECCOMP=y
# CONFIG_HZ_100 is not set
CONFIG_HZ_250=y
# CONFIG_HZ_300 is not set
# CONFIG_HZ_1000 is not set
CONFIG_HZ=250
CONFIG_SCHED_HRTICK=y
# CONFIG_KEXEC is not set
CONFIG_CRASH_DUMP=y
CONFIG_PHYSICAL_START=0x200000
# CONFIG_RELOCATABLE is not set
CONFIG_PHYSICAL_ALIGN=0x200000
CONFIG_HOTPLUG_CPU=y
CONFIG_COMPAT_VDSO=y
# CONFIG_CMDLINE_BOOL is not set
CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y
#
# Power management and ACPI options
#
CONFIG_PM=y
# CONFIG_PM_DEBUG is not set
# CONFIG_SUSPEND is not set
# CONFIG_HIBERNATION is not set
CONFIG_ACPI=y
# CONFIG_ACPI_PROCFS is not set
CONFIG_ACPI_PROCFS_POWER=y
CONFIG_ACPI_SYSFS_POWER=y
# CONFIG_ACPI_PROC_EVENT is not set
# CONFIG_ACPI_AC is not set
# CONFIG_ACPI_BATTERY is not set
# CONFIG_ACPI_BUTTON is not set
# CONFIG_ACPI_FAN is not set
# CONFIG_ACPI_DOCK is not set
CONFIG_ACPI_PROCESSOR=m
CONFIG_ACPI_HOTPLUG_CPU=y
CONFIG_ACPI_THERMAL=m
# CONFIG_ACPI_WMI is not set
# CONFIG_ACPI_ASUS is not set
# CONFIG_ACPI_TOSHIBA is not set
# CONFIG_ACPI_CUSTOM_DSDT is not set
CONFIG_ACPI_BLACKLIST_YEAR=0
# CONFIG_ACPI_DEBUG is not set
# CONFIG_ACPI_PCI_SLOT is not set
CONFIG_ACPI_SYSTEM=y
CONFIG_X86_PM_TIMER=y
CONFIG_ACPI_CONTAINER=y
# CONFIG_ACPI_SBS is not set
#
# CPU Frequency scaling
#
CONFIG_CPU_FREQ=y
CONFIG_CPU_FREQ_TABLE=y
# CONFIG_CPU_FREQ_DEBUG is not set
# CONFIG_CPU_FREQ_STAT is not set
# CONFIG_CPU_FREQ_DEFAULT_GOV_PERFORMANCE is not set
# CONFIG_CPU_FREQ_DEFAULT_GOV_POWERSAVE is not set
# CONFIG_CPU_FREQ_DEFAULT_GOV_USERSPACE is not set
CONFIG_CPU_FREQ_DEFAULT_GOV_ONDEMAND=y
# CONFIG_CPU_FREQ_DEFAULT_GOV_CONSERVATIVE is not set
CONFIG_CPU_FREQ_GOV_PERFORMANCE=y
# CONFIG_CPU_FREQ_GOV_POWERSAVE is not set
CONFIG_CPU_FREQ_GOV_USERSPACE=m
CONFIG_CPU_FREQ_GOV_ONDEMAND=y
# CONFIG_CPU_FREQ_GOV_CONSERVATIVE is not set
#
# CPUFreq processor drivers
#
CONFIG_X86_ACPI_CPUFREQ=m
# CONFIG_X86_POWERNOW_K8 is not set
# CONFIG_X86_SPEEDSTEP_CENTRINO is not set
# CONFIG_X86_P4_CLOCKMOD is not set
#
# shared options
#
# CONFIG_X86_ACPI_CPUFREQ_PROC_INTF is not set
# CONFIG_X86_SPEEDSTEP_LIB is not set
CONFIG_CPU_IDLE=y
CONFIG_CPU_IDLE_GOV_LADDER=y
CONFIG_CPU_IDLE_GOV_MENU=y
#
# Memory power savings
#
# CONFIG_I7300_IDLE is not set
#
# Bus options (PCI etc.)
#
CONFIG_PCI=y
CONFIG_PCI_DIRECT=y
CONFIG_PCI_MMCONFIG=y
CONFIG_PCI_DOMAINS=y
# CONFIG_DMAR is not set
# CONFIG_INTR_REMAP is not set
CONFIG_PCIEPORTBUS=y
CONFIG_PCIEAER=y
# CONFIG_PCIEASPM is not set
CONFIG_ARCH_SUPPORTS_MSI=y
CONFIG_PCI_MSI=y
# CONFIG_PCI_LEGACY is not set
# CONFIG_HT_IRQ is not set
CONFIG_ISA_DMA_API=y
CONFIG_K8_NB=y
# CONFIG_PCCARD is not set
# CONFIG_HOTPLUG_PCI is not set
#
# Executable file formats / Emulations
#
CONFIG_BINFMT_ELF=y
CONFIG_COMPAT_BINFMT_ELF=y
# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set
# CONFIG_HAVE_AOUT is not set
CONFIG_BINFMT_MISC=y
CONFIG_IA32_EMULATION=y
CONFIG_IA32_AOUT=y
CONFIG_COMPAT=y
CONFIG_COMPAT_FOR_U64_ALIGNMENT=y
CONFIG_SYSVIPC_COMPAT=y
CONFIG_NET=y
#
# Networking options
#
CONFIG_PACKET=y
# CONFIG_PACKET_MMAP is not set
CONFIG_UNIX=y
# CONFIG_NET_KEY is not set
CONFIG_INET=y
# CONFIG_IP_MULTICAST is not set
# CONFIG_IP_ADVANCED_ROUTER is not set
CONFIG_IP_FIB_HASH=y
# CONFIG_IP_PNP is not set
# CONFIG_NET_IPIP is not set
# CONFIG_NET_IPGRE is not set
# CONFIG_ARPD is not set
# CONFIG_SYN_COOKIES is not set
# CONFIG_INET_AH is not set
# CONFIG_INET_ESP is not set
# CONFIG_INET_IPCOMP is not set
# CONFIG_INET_XFRM_TUNNEL is not set
# CONFIG_INET_TUNNEL is not set
# CONFIG_INET_XFRM_MODE_TRANSPORT is not set
# CONFIG_INET_XFRM_MODE_TUNNEL is not set
# CONFIG_INET_XFRM_MODE_BEET is not set
# CONFIG_INET_LRO is not set
# CONFIG_INET_DIAG is not set
# CONFIG_TCP_CONG_ADVANCED is not set
CONFIG_TCP_CONG_CUBIC=y
CONFIG_DEFAULT_TCP_CONG="cubic"
# CONFIG_TCP_MD5SIG is not set
# CONFIG_IPV6 is not set
# CONFIG_NETWORK_SECMARK is not set
CONFIG_NETFILTER=y
# CONFIG_NETFILTER_DEBUG is not set
CONFIG_NETFILTER_ADVANCED=y
CONFIG_BRIDGE_NETFILTER=y
#
# Core Netfilter Configuration
#
# CONFIG_NETFILTER_NETLINK_QUEUE is not set
# CONFIG_NETFILTER_NETLINK_LOG is not set
CONFIG_NF_CONNTRACK=y
CONFIG_NF_CT_ACCT=y
CONFIG_NF_CONNTRACK_MARK=y
CONFIG_NF_CONNTRACK_EVENTS=y
# CONFIG_NF_CT_PROTO_DCCP is not set
# CONFIG_NF_CT_PROTO_SCTP is not set
# CONFIG_NF_CT_PROTO_UDPLITE is not set
# CONFIG_NF_CONNTRACK_AMANDA is not set
# CONFIG_NF_CONNTRACK_FTP is not set
# CONFIG_NF_CONNTRACK_H323 is not set
# CONFIG_NF_CONNTRACK_IRC is not set
# CONFIG_NF_CONNTRACK_NETBIOS_NS is not set
# CONFIG_NF_CONNTRACK_PPTP is not set
# CONFIG_NF_CONNTRACK_SANE is not set
# CONFIG_NF_CONNTRACK_SIP is not set
# CONFIG_NF_CONNTRACK_TFTP is not set
# CONFIG_NF_CT_NETLINK is not set
CONFIG_NETFILTER_XTABLES=y
# CONFIG_NETFILTER_XT_TARGET_CLASSIFY is not set
# CONFIG_NETFILTER_XT_TARGET_CONNMARK is not set
# CONFIG_NETFILTER_XT_TARGET_MARK is not set
# CONFIG_NETFILTER_XT_TARGET_NFLOG is not set
# CONFIG_NETFILTER_XT_TARGET_NFQUEUE is not set
# CONFIG_NETFILTER_XT_TARGET_RATEEST is not set
# CONFIG_NETFILTER_XT_TARGET_TCPMSS is not set
# CONFIG_NETFILTER_XT_MATCH_COMMENT is not set
# CONFIG_NETFILTER_XT_MATCH_CONNBYTES is not set
# CONFIG_NETFILTER_XT_MATCH_CONNLIMIT is not set
# CONFIG_NETFILTER_XT_MATCH_CONNMARK is not set
# CONFIG_NETFILTER_XT_MATCH_CONNTRACK is not set
# CONFIG_NETFILTER_XT_MATCH_DCCP is not set
# CONFIG_NETFILTER_XT_MATCH_DSCP is not set
# CONFIG_NETFILTER_XT_MATCH_ESP is not set
# CONFIG_NETFILTER_XT_MATCH_HASHLIMIT is not set
# CONFIG_NETFILTER_XT_MATCH_HELPER is not set
# CONFIG_NETFILTER_XT_MATCH_IPRANGE is not set
# CONFIG_NETFILTER_XT_MATCH_LENGTH is not set
# CONFIG_NETFILTER_XT_MATCH_LIMIT is not set
# CONFIG_NETFILTER_XT_MATCH_MAC is not set
# CONFIG_NETFILTER_XT_MATCH_MARK is not set
# CONFIG_NETFILTER_XT_MATCH_MULTIPORT is not set
# CONFIG_NETFILTER_XT_MATCH_OWNER is not set
# CONFIG_NETFILTER_XT_MATCH_PHYSDEV is not set
# CONFIG_NETFILTER_XT_MATCH_PKTTYPE is not set
# CONFIG_NETFILTER_XT_MATCH_QUOTA is not set
# CONFIG_NETFILTER_XT_MATCH_RATEEST is not set
# CONFIG_NETFILTER_XT_MATCH_REALM is not set
# CONFIG_NETFILTER_XT_MATCH_RECENT is not set
# CONFIG_NETFILTER_XT_MATCH_SCTP is not set
# CONFIG_NETFILTER_XT_MATCH_STATE is not set
# CONFIG_NETFILTER_XT_MATCH_STATISTIC is not set
# CONFIG_NETFILTER_XT_MATCH_STRING is not set
# CONFIG_NETFILTER_XT_MATCH_TCPMSS is not set
# CONFIG_NETFILTER_XT_MATCH_TIME is not set
# CONFIG_NETFILTER_XT_MATCH_U32 is not set
# CONFIG_IP_VS is not set
#
# IP: Netfilter Configuration
#
CONFIG_NF_DEFRAG_IPV4=y
CONFIG_NF_CONNTRACK_IPV4=y
CONFIG_NF_CONNTRACK_PROC_COMPAT=y
# CONFIG_IP_NF_QUEUE is not set
CONFIG_IP_NF_IPTABLES=y
# CONFIG_IP_NF_MATCH_ADDRTYPE is not set
# CONFIG_IP_NF_MATCH_AH is not set
# CONFIG_IP_NF_MATCH_ECN is not set
# CONFIG_IP_NF_MATCH_TTL is not set
# CONFIG_IP_NF_FILTER is not set
# CONFIG_IP_NF_TARGET_LOG is not set
# CONFIG_IP_NF_TARGET_ULOG is not set
CONFIG_NF_NAT=y
CONFIG_NF_NAT_NEEDED=y
CONFIG_IP_NF_TARGET_MASQUERADE=y
CONFIG_IP_NF_TARGET_NETMAP=y
CONFIG_IP_NF_TARGET_REDIRECT=y
CONFIG_NF_NAT_SNMP_BASIC=y
# CONFIG_NF_NAT_FTP is not set
# CONFIG_NF_NAT_IRC is not set
# CONFIG_NF_NAT_TFTP is not set
# CONFIG_NF_NAT_AMANDA is not set
# CONFIG_NF_NAT_PPTP is not set
# CONFIG_NF_NAT_H323 is not set
# CONFIG_NF_NAT_SIP is not set
# CONFIG_IP_NF_MANGLE is not set
# CONFIG_IP_NF_RAW is not set
# CONFIG_IP_NF_ARPTABLES is not set
# CONFIG_BRIDGE_NF_EBTABLES is not set
# CONFIG_IP_DCCP is not set
# CONFIG_IP_SCTP is not set
# CONFIG_TIPC is not set
# CONFIG_ATM is not set
CONFIG_STP=y
CONFIG_BRIDGE=y
# CONFIG_NET_DSA is not set
# CONFIG_VLAN_8021Q is not set
# CONFIG_DECNET is not set
CONFIG_LLC=y
# CONFIG_LLC2 is not set
# CONFIG_IPX is not set
# CONFIG_ATALK is not set
# CONFIG_X25 is not set
# CONFIG_LAPB is not set
# CONFIG_ECONET is not set
# CONFIG_WAN_ROUTER is not set
# CONFIG_NET_SCHED is not set
#
# Network testing
#
# CONFIG_NET_PKTGEN is not set
# CONFIG_HAMRADIO is not set
# CONFIG_CAN is not set
# CONFIG_IRDA is not set
# CONFIG_BT is not set
# CONFIG_AF_RXRPC is not set
# CONFIG_PHONET is not set
CONFIG_WIRELESS=y
CONFIG_CFG80211=y
CONFIG_NL80211=y
# CONFIG_WIRELESS_OLD_REGULATORY is not set
CONFIG_WIRELESS_EXT=y
CONFIG_WIRELESS_EXT_SYSFS=y
CONFIG_MAC80211=m
#
# Rate control algorithm selection
#
CONFIG_MAC80211_RC_PID=y
# CONFIG_MAC80211_RC_MINSTREL is not set
CONFIG_MAC80211_RC_DEFAULT_PID=y
# CONFIG_MAC80211_RC_DEFAULT_MINSTREL is not set
CONFIG_MAC80211_RC_DEFAULT="pid"
# CONFIG_MAC80211_MESH is not set
CONFIG_MAC80211_LEDS=y
CONFIG_MAC80211_DEBUGFS=y
CONFIG_MAC80211_DEBUG_MENU=y
CONFIG_MAC80211_DEBUG_PACKET_ALIGNMENT=y
# CONFIG_MAC80211_NOINLINE is not set
CONFIG_MAC80211_VERBOSE_DEBUG=y
# CONFIG_MAC80211_HT_DEBUG is not set
# CONFIG_MAC80211_TKIP_DEBUG is not set
# CONFIG_MAC80211_IBSS_DEBUG is not set
# CONFIG_MAC80211_VERBOSE_PS_DEBUG is not set
CONFIG_MAC80211_DEBUG_COUNTERS=y
# CONFIG_MAC80211_VERBOSE_SPECT_MGMT_DEBUG is not set
# CONFIG_IEEE80211 is not set
# CONFIG_RFKILL is not set
# CONFIG_NET_9P is not set
#
# Device Drivers
#
#
# Generic Driver Options
#
CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
CONFIG_STANDALONE=y
CONFIG_PREVENT_FIRMWARE_BUILD=y
CONFIG_FW_LOADER=y
CONFIG_FIRMWARE_IN_KERNEL=y
CONFIG_EXTRA_FIRMWARE=""
# CONFIG_SYS_HYPERVISOR is not set
# CONFIG_CONNECTOR is not set
# CONFIG_MTD is not set
# CONFIG_PARPORT is not set
CONFIG_PNP=y
CONFIG_PNP_DEBUG_MESSAGES=y
#
# Protocols
#
CONFIG_PNPACPI=y
CONFIG_BLK_DEV=y
# CONFIG_BLK_DEV_FD is not set
# CONFIG_BLK_CPQ_DA is not set
# CONFIG_BLK_CPQ_CISS_DA is not set
# CONFIG_BLK_DEV_DAC960 is not set
# CONFIG_BLK_DEV_UMEM is not set
# CONFIG_BLK_DEV_COW_COMMON is not set
CONFIG_BLK_DEV_LOOP=y
# CONFIG_BLK_DEV_CRYPTOLOOP is not set
# CONFIG_BLK_DEV_NBD is not set
# CONFIG_BLK_DEV_SX8 is not set
# CONFIG_BLK_DEV_UB is not set
CONFIG_BLK_DEV_RAM=y
CONFIG_BLK_DEV_RAM_COUNT=16
CONFIG_BLK_DEV_RAM_SIZE=4096
# CONFIG_BLK_DEV_XIP is not set
# CONFIG_CDROM_PKTCDVD is not set
# CONFIG_ATA_OVER_ETH is not set
# CONFIG_BLK_DEV_HD is not set
# CONFIG_MISC_DEVICES is not set
CONFIG_HAVE_IDE=y
CONFIG_IDE=y
#
# Please see Documentation/ide/ide.txt for help/info on IDE drives
#
# CONFIG_BLK_DEV_IDE_SATA is not set
CONFIG_IDE_GD=y
CONFIG_IDE_GD_ATA=y
# CONFIG_IDE_GD_ATAPI is not set
CONFIG_BLK_DEV_IDECD=m
CONFIG_BLK_DEV_IDECD_VERBOSE_ERRORS=y
# CONFIG_BLK_DEV_IDETAPE is not set
# CONFIG_BLK_DEV_IDESCSI is not set
# CONFIG_BLK_DEV_IDEACPI is not set
# CONFIG_IDE_TASK_IOCTL is not set
CONFIG_IDE_PROC_FS=y
#
# IDE chipset support/bugfixes
#
# CONFIG_IDE_GENERIC is not set
# CONFIG_BLK_DEV_PLATFORM is not set
# CONFIG_BLK_DEV_CMD640 is not set
# CONFIG_BLK_DEV_IDEPNP is not set
CONFIG_BLK_DEV_IDEDMA_SFF=y
#
# PCI IDE chipsets support
#
CONFIG_BLK_DEV_IDEPCI=y
# CONFIG_IDEPCI_PCIBUS_ORDER is not set
# CONFIG_BLK_DEV_OFFBOARD is not set
CONFIG_BLK_DEV_GENERIC=m
# CONFIG_BLK_DEV_OPTI621 is not set
# CONFIG_BLK_DEV_RZ1000 is not set
CONFIG_BLK_DEV_IDEDMA_PCI=y
# CONFIG_BLK_DEV_AEC62XX is not set
# CONFIG_BLK_DEV_ALI15X3 is not set
# CONFIG_BLK_DEV_AMD74XX is not set
# CONFIG_BLK_DEV_ATIIXP is not set
# CONFIG_BLK_DEV_CMD64X is not set
# CONFIG_BLK_DEV_TRIFLEX is not set
# CONFIG_BLK_DEV_CS5520 is not set
# CONFIG_BLK_DEV_CS5530 is not set
# CONFIG_BLK_DEV_HPT366 is not set
CONFIG_BLK_DEV_JMICRON=y
# CONFIG_BLK_DEV_SC1200 is not set
# CONFIG_BLK_DEV_PIIX is not set
# CONFIG_BLK_DEV_IT8213 is not set
# CONFIG_BLK_DEV_IT821X is not set
# CONFIG_BLK_DEV_NS87415 is not set
# CONFIG_BLK_DEV_PDC202XX_OLD is not set
# CONFIG_BLK_DEV_PDC202XX_NEW is not set
# CONFIG_BLK_DEV_SVWKS is not set
# CONFIG_BLK_DEV_SIIMAGE is not set
# CONFIG_BLK_DEV_SIS5513 is not set
# CONFIG_BLK_DEV_SLC90E66 is not set
# CONFIG_BLK_DEV_TRM290 is not set
# CONFIG_BLK_DEV_VIA82CXXX is not set
# CONFIG_BLK_DEV_TC86C001 is not set
CONFIG_BLK_DEV_IDEDMA=y
#
# SCSI device support
#
# CONFIG_RAID_ATTRS is not set
CONFIG_SCSI=y
CONFIG_SCSI_DMA=y
# CONFIG_SCSI_TGT is not set
# CONFIG_SCSI_NETLINK is not set
# CONFIG_SCSI_PROC_FS is not set
#
# SCSI support type (disk, tape, CD-ROM)
#
CONFIG_BLK_DEV_SD=m
# CONFIG_CHR_DEV_ST is not set
# CONFIG_CHR_DEV_OSST is not set
# CONFIG_BLK_DEV_SR is not set
# CONFIG_CHR_DEV_SG is not set
# CONFIG_CHR_DEV_SCH is not set
#
# Some SCSI devices (e.g. CD jukebox) support multiple LUNs
#
# CONFIG_SCSI_MULTI_LUN is not set
CONFIG_SCSI_CONSTANTS=y
# CONFIG_SCSI_LOGGING is not set
# CONFIG_SCSI_SCAN_ASYNC is not set
CONFIG_SCSI_WAIT_SCAN=m
#
# SCSI Transports
#
# CONFIG_SCSI_SPI_ATTRS is not set
# CONFIG_SCSI_FC_ATTRS is not set
# CONFIG_SCSI_ISCSI_ATTRS is not set
# CONFIG_SCSI_SAS_LIBSAS is not set
# CONFIG_SCSI_SRP_ATTRS is not set
# CONFIG_SCSI_LOWLEVEL is not set
# CONFIG_SCSI_DH is not set
CONFIG_ATA=y
# CONFIG_ATA_NONSTANDARD is not set
# CONFIG_ATA_ACPI is not set
# CONFIG_SATA_PMP is not set
# CONFIG_SATA_AHCI is not set
# CONFIG_SATA_SIL24 is not set
CONFIG_ATA_SFF=y
# CONFIG_SATA_SVW is not set
CONFIG_ATA_PIIX=y
# CONFIG_SATA_MV is not set
# CONFIG_SATA_NV is not set
# CONFIG_PDC_ADMA is not set
# CONFIG_SATA_QSTOR is not set
# CONFIG_SATA_PROMISE is not set
# CONFIG_SATA_SX4 is not set
# CONFIG_SATA_SIL is not set
# CONFIG_SATA_SIS is not set
# CONFIG_SATA_ULI is not set
# CONFIG_SATA_VIA is not set
# CONFIG_SATA_VITESSE is not set
# CONFIG_SATA_INIC162X is not set
# CONFIG_PATA_ALI is not set
# CONFIG_PATA_AMD is not set
# CONFIG_PATA_ARTOP is not set
# CONFIG_PATA_ATIIXP is not set
# CONFIG_PATA_CMD640_PCI is not set
# CONFIG_PATA_CMD64X is not set
# CONFIG_PATA_CS5520 is not set
# CONFIG_PATA_CS5530 is not set
# CONFIG_PATA_CYPRESS is not set
# CONFIG_PATA_EFAR is not set
# CONFIG_ATA_GENERIC is not set
# CONFIG_PATA_HPT366 is not set
# CONFIG_PATA_HPT37X is not set
# CONFIG_PATA_HPT3X2N is not set
# CONFIG_PATA_HPT3X3 is not set
# CONFIG_PATA_IT821X is not set
# CONFIG_PATA_IT8213 is not set
# CONFIG_PATA_JMICRON is not set
# CONFIG_PATA_TRIFLEX is not set
# CONFIG_PATA_MARVELL is not set
# CONFIG_PATA_MPIIX is not set
# CONFIG_PATA_OLDPIIX is not set
# CONFIG_PATA_NETCELL is not set
# CONFIG_PATA_NINJA32 is not set
# CONFIG_PATA_NS87410 is not set
# CONFIG_PATA_NS87415 is not set
# CONFIG_PATA_OPTI is not set
# CONFIG_PATA_OPTIDMA is not set
# CONFIG_PATA_PDC_OLD is not set
# CONFIG_PATA_RADISYS is not set
# CONFIG_PATA_RZ1000 is not set
# CONFIG_PATA_SC1200 is not set
# CONFIG_PATA_SERVERWORKS is not set
# CONFIG_PATA_PDC2027X is not set
# CONFIG_PATA_SIL680 is not set
# CONFIG_PATA_SIS is not set
# CONFIG_PATA_VIA is not set
# CONFIG_PATA_WINBOND is not set
# CONFIG_PATA_SCH is not set
CONFIG_MD=y
CONFIG_BLK_DEV_MD=y
CONFIG_MD_AUTODETECT=y
# CONFIG_MD_LINEAR is not set
CONFIG_MD_RAID0=y
# CONFIG_MD_RAID1 is not set
# CONFIG_MD_RAID10 is not set
# CONFIG_MD_RAID456 is not set
# CONFIG_MD_MULTIPATH is not set
# CONFIG_MD_FAULTY is not set
# CONFIG_BLK_DEV_DM is not set
# CONFIG_FUSION is not set
#
# IEEE 1394 (FireWire) support
#
#
# Enable only one of the two stacks, unless you know what you are doing
#
# CONFIG_FIREWIRE is not set
# CONFIG_IEEE1394 is not set
# CONFIG_I2O is not set
# CONFIG_MACINTOSH_DRIVERS is not set
CONFIG_NETDEVICES=y
# CONFIG_DUMMY is not set
# CONFIG_BONDING is not set
# CONFIG_MACVLAN is not set
# CONFIG_EQUALIZER is not set
CONFIG_TUN=m
# CONFIG_VETH is not set
# CONFIG_NET_SB1000 is not set
# CONFIG_ARCNET is not set
# CONFIG_NET_ETHERNET is not set
CONFIG_NETDEV_1000=y
# CONFIG_ACENIC is not set
# CONFIG_DL2K is not set
# CONFIG_E1000 is not set
# CONFIG_E1000E is not set
# CONFIG_IP1000 is not set
# CONFIG_IGB is not set
# CONFIG_NS83820 is not set
# CONFIG_HAMACHI is not set
# CONFIG_YELLOWFIN is not set
# CONFIG_R8169 is not set
# CONFIG_SIS190 is not set
# CONFIG_SKGE is not set
CONFIG_SKY2=m
CONFIG_SKY2_DEBUG=y
# CONFIG_VIA_VELOCITY is not set
# CONFIG_TIGON3 is not set
# CONFIG_BNX2 is not set
# CONFIG_QLA3XXX is not set
# CONFIG_ATL1 is not set
# CONFIG_ATL1E is not set
# CONFIG_JME is not set
# CONFIG_NETDEV_10000 is not set
# CONFIG_TR is not set
#
# Wireless LAN
#
# CONFIG_WLAN_PRE80211 is not set
CONFIG_WLAN_80211=y
# CONFIG_IPW2100 is not set
# CONFIG_IPW2200 is not set
# CONFIG_LIBERTAS is not set
# CONFIG_LIBERTAS_THINFIRM is not set
# CONFIG_AIRO is not set
# CONFIG_HERMES is not set
# CONFIG_ATMEL is not set
# CONFIG_PRISM54 is not set
# CONFIG_USB_ZD1201 is not set
# CONFIG_USB_NET_RNDIS_WLAN is not set
# CONFIG_RTL8180 is not set
# CONFIG_RTL8187 is not set
# CONFIG_ADM8211 is not set
# CONFIG_MAC80211_HWSIM is not set
# CONFIG_P54_COMMON is not set
# CONFIG_ATH5K is not set
# CONFIG_ATH9K is not set
# CONFIG_IWLCORE is not set
# CONFIG_IWLWIFI_LEDS is not set
# CONFIG_IWLAGN is not set
# CONFIG_IWL3945 is not set
# CONFIG_HOSTAP is not set
CONFIG_B43=m
CONFIG_B43_PCI_AUTOSELECT=y
CONFIG_B43_PCICORE_AUTOSELECT=y
CONFIG_B43_LEDS=y
CONFIG_B43_DEBUG=y
# CONFIG_B43_FORCE_PIO is not set
# CONFIG_B43LEGACY is not set
# CONFIG_ZD1211RW is not set
# CONFIG_RT2X00 is not set
#
# USB Network Adapters
#
# CONFIG_USB_CATC is not set
# CONFIG_USB_KAWETH is not set
# CONFIG_USB_PEGASUS is not set
# CONFIG_USB_RTL8150 is not set
# CONFIG_USB_USBNET is not set
# CONFIG_WAN is not set
# CONFIG_FDDI is not set
# CONFIG_HIPPI is not set
# CONFIG_PPP is not set
# CONFIG_SLIP is not set
# CONFIG_NET_FC is not set
# CONFIG_NETCONSOLE is not set
# CONFIG_NETPOLL is not set
# CONFIG_NET_POLL_CONTROLLER is not set
# CONFIG_ISDN is not set
# CONFIG_PHONE is not set
#
# Input device support
#
CONFIG_INPUT=y
# CONFIG_INPUT_FF_MEMLESS is not set
# CONFIG_INPUT_POLLDEV is not set
#
# Userland interfaces
#
CONFIG_INPUT_MOUSEDEV=y
CONFIG_INPUT_MOUSEDEV_PSAUX=y
CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024
CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
# CONFIG_INPUT_JOYDEV is not set
CONFIG_INPUT_EVDEV=y
# CONFIG_INPUT_EVBUG is not set
#
# Input Device Drivers
#
CONFIG_INPUT_KEYBOARD=y
CONFIG_KEYBOARD_ATKBD=y
# CONFIG_KEYBOARD_SUNKBD is not set
# CONFIG_KEYBOARD_LKKBD is not set
# CONFIG_KEYBOARD_XTKBD is not set
# CONFIG_KEYBOARD_NEWTON is not set
# CONFIG_KEYBOARD_STOWAWAY is not set
CONFIG_INPUT_MOUSE=y
CONFIG_MOUSE_PS2=y
CONFIG_MOUSE_PS2_ALPS=y
CONFIG_MOUSE_PS2_LOGIPS2PP=y
CONFIG_MOUSE_PS2_SYNAPTICS=y
CONFIG_MOUSE_PS2_LIFEBOOK=y
CONFIG_MOUSE_PS2_TRACKPOINT=y
# CONFIG_MOUSE_PS2_ELANTECH is not set
# CONFIG_MOUSE_PS2_TOUCHKIT is not set
# CONFIG_MOUSE_SERIAL is not set
# CONFIG_MOUSE_APPLETOUCH is not set
# CONFIG_MOUSE_BCM5974 is not set
# CONFIG_MOUSE_VSXXXAA is not set
# CONFIG_INPUT_JOYSTICK is not set
# CONFIG_INPUT_TABLET is not set
# CONFIG_INPUT_TOUCHSCREEN is not set
# CONFIG_INPUT_MISC is not set
#
# Hardware I/O ports
#
CONFIG_SERIO=y
CONFIG_SERIO_I8042=y
# CONFIG_SERIO_SERPORT is not set
# CONFIG_SERIO_CT82C710 is not set
# CONFIG_SERIO_PCIPS2 is not set
CONFIG_SERIO_LIBPS2=y
# CONFIG_SERIO_RAW is not set
# CONFIG_GAMEPORT is not set
#
# Character devices
#
CONFIG_VT=y
CONFIG_CONSOLE_TRANSLATIONS=y
CONFIG_VT_CONSOLE=y
CONFIG_HW_CONSOLE=y
# CONFIG_VT_HW_CONSOLE_BINDING is not set
CONFIG_DEVKMEM=y
# CONFIG_SERIAL_NONSTANDARD is not set
# CONFIG_NOZOMI is not set
#
# Serial drivers
#
CONFIG_SERIAL_8250=y
CONFIG_SERIAL_8250_CONSOLE=y
CONFIG_FIX_EARLYCON_MEM=y
CONFIG_SERIAL_8250_PCI=y
CONFIG_SERIAL_8250_PNP=y
CONFIG_SERIAL_8250_NR_UARTS=4
CONFIG_SERIAL_8250_RUNTIME_UARTS=4
# CONFIG_SERIAL_8250_EXTENDED is not set
#
# Non-8250 serial port support
#
CONFIG_SERIAL_CORE=y
CONFIG_SERIAL_CORE_CONSOLE=y
# CONFIG_SERIAL_JSM is not set
CONFIG_UNIX98_PTYS=y
CONFIG_LEGACY_PTYS=y
CONFIG_LEGACY_PTY_COUNT=256
# CONFIG_IPMI_HANDLER is not set
CONFIG_HW_RANDOM=y
CONFIG_HW_RANDOM_INTEL=y
# CONFIG_HW_RANDOM_AMD is not set
# CONFIG_NVRAM is not set
CONFIG_RTC=y
# CONFIG_R3964 is not set
# CONFIG_APPLICOM is not set
# CONFIG_MWAVE is not set
# CONFIG_PC8736x_GPIO is not set
CONFIG_RAW_DRIVER=y
CONFIG_MAX_RAW_DEVS=256
CONFIG_HPET=y
CONFIG_HPET_MMAP=y
CONFIG_HANGCHECK_TIMER=y
# CONFIG_TCG_TPM is not set
# CONFIG_TELCLOCK is not set
CONFIG_DEVPORT=y
# CONFIG_I2C is not set
# CONFIG_SPI is not set
CONFIG_ARCH_WANT_OPTIONAL_GPIOLIB=y
# CONFIG_GPIOLIB is not set
# CONFIG_W1 is not set
CONFIG_POWER_SUPPLY=y
# CONFIG_POWER_SUPPLY_DEBUG is not set
# CONFIG_PDA_POWER is not set
# CONFIG_BATTERY_DS2760 is not set
# CONFIG_HWMON is not set
CONFIG_THERMAL=y
# CONFIG_WATCHDOG is not set
CONFIG_SSB_POSSIBLE=y
#
# Sonics Silicon Backplane
#
CONFIG_SSB=m
CONFIG_SSB_SPROM=y
CONFIG_SSB_PCIHOST_POSSIBLE=y
CONFIG_SSB_PCIHOST=y
CONFIG_SSB_B43_PCI_BRIDGE=y
# CONFIG_SSB_DEBUG is not set
CONFIG_SSB_DRIVER_PCICORE_POSSIBLE=y
CONFIG_SSB_DRIVER_PCICORE=y
#
# Multifunction device drivers
#
# CONFIG_MFD_CORE is not set
# CONFIG_MFD_SM501 is not set
# CONFIG_HTC_PASIC3 is not set
# CONFIG_MFD_TMIO is not set
# CONFIG_REGULATOR is not set
#
# Multimedia devices
#
#
# Multimedia core support
#
# CONFIG_VIDEO_DEV is not set
# CONFIG_DVB_CORE is not set
# CONFIG_VIDEO_MEDIA is not set
#
# Multimedia drivers
#
# CONFIG_DAB is not set
#
# Graphics support
#
CONFIG_AGP=y
CONFIG_AGP_AMD64=y
# CONFIG_AGP_INTEL is not set
# CONFIG_AGP_SIS is not set
# CONFIG_AGP_VIA is not set
# CONFIG_DRM is not set
# CONFIG_VGASTATE is not set
# CONFIG_VIDEO_OUTPUT_CONTROL is not set
# CONFIG_FB is not set
# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
#
# Display device support
#
# CONFIG_DISPLAY_SUPPORT is not set
#
# Console display driver support
#
CONFIG_VGA_CONSOLE=y
CONFIG_VGACON_SOFT_SCROLLBACK=y
CONFIG_VGACON_SOFT_SCROLLBACK_SIZE=256
CONFIG_DUMMY_CONSOLE=y
CONFIG_SOUND=y
# CONFIG_SOUND_OSS_CORE is not set
CONFIG_SND=y
CONFIG_SND_TIMER=y
CONFIG_SND_PCM=y
CONFIG_SND_SEQUENCER=m
# CONFIG_SND_SEQ_DUMMY is not set
# CONFIG_SND_MIXER_OSS is not set
# CONFIG_SND_PCM_OSS is not set
# CONFIG_SND_SEQUENCER_OSS is not set
# CONFIG_SND_RTCTIMER is not set
CONFIG_SND_DYNAMIC_MINORS=y
CONFIG_SND_SUPPORT_OLD_API=y
# CONFIG_SND_VERBOSE_PROCFS is not set
# CONFIG_SND_VERBOSE_PRINTK is not set
# CONFIG_SND_DEBUG is not set
CONFIG_SND_VMASTER=y
CONFIG_SND_DRIVERS=y
# CONFIG_SND_PCSP is not set
# CONFIG_SND_DUMMY is not set
# CONFIG_SND_VIRMIDI is not set
# CONFIG_SND_MTPAV is not set
# CONFIG_SND_SERIAL_U16550 is not set
# CONFIG_SND_MPU401 is not set
CONFIG_SND_PCI=y
# CONFIG_SND_AD1889 is not set
# CONFIG_SND_ALS300 is not set
# CONFIG_SND_ALS4000 is not set
# CONFIG_SND_ALI5451 is not set
# CONFIG_SND_ATIIXP is not set
# CONFIG_SND_ATIIXP_MODEM is not set
# CONFIG_SND_AU8810 is not set
# CONFIG_SND_AU8820 is not set
# CONFIG_SND_AU8830 is not set
# CONFIG_SND_AW2 is not set
# CONFIG_SND_AZT3328 is not set
# CONFIG_SND_BT87X is not set
# CONFIG_SND_CA0106 is not set
# CONFIG_SND_CMIPCI is not set
# CONFIG_SND_OXYGEN is not set
# CONFIG_SND_CS4281 is not set
# CONFIG_SND_CS46XX is not set
# CONFIG_SND_CS5530 is not set
# CONFIG_SND_DARLA20 is not set
# CONFIG_SND_GINA20 is not set
# CONFIG_SND_LAYLA20 is not set
# CONFIG_SND_DARLA24 is not set
# CONFIG_SND_GINA24 is not set
# CONFIG_SND_LAYLA24 is not set
# CONFIG_SND_MONA is not set
# CONFIG_SND_MIA is not set
# CONFIG_SND_ECHO3G is not set
# CONFIG_SND_INDIGO is not set
# CONFIG_SND_INDIGOIO is not set
# CONFIG_SND_INDIGODJ is not set
# CONFIG_SND_EMU10K1 is not set
# CONFIG_SND_EMU10K1X is not set
# CONFIG_SND_ENS1370 is not set
# CONFIG_SND_ENS1371 is not set
# CONFIG_SND_ES1938 is not set
# CONFIG_SND_ES1968 is not set
# CONFIG_SND_FM801 is not set
CONFIG_SND_HDA_INTEL=y
# CONFIG_SND_HDA_HWDEP is not set
# CONFIG_SND_HDA_INPUT_BEEP is not set
CONFIG_SND_HDA_CODEC_REALTEK=y
# CONFIG_SND_HDA_CODEC_ANALOG is not set
# CONFIG_SND_HDA_CODEC_SIGMATEL is not set
# CONFIG_SND_HDA_CODEC_VIA is not set
# CONFIG_SND_HDA_CODEC_ATIHDMI is not set
# CONFIG_SND_HDA_CODEC_NVHDMI is not set
# CONFIG_SND_HDA_CODEC_CONEXANT is not set
# CONFIG_SND_HDA_CODEC_CMEDIA is not set
# CONFIG_SND_HDA_CODEC_SI3054 is not set
CONFIG_SND_HDA_GENERIC=y
# CONFIG_SND_HDA_POWER_SAVE is not set
# CONFIG_SND_HDSP is not set
# CONFIG_SND_HDSPM is not set
# CONFIG_SND_HIFIER is not set
# CONFIG_SND_ICE1712 is not set
# CONFIG_SND_ICE1724 is not set
# CONFIG_SND_INTEL8X0 is not set
# CONFIG_SND_INTEL8X0M is not set
# CONFIG_SND_KORG1212 is not set
# CONFIG_SND_MAESTRO3 is not set
# CONFIG_SND_MIXART is not set
# CONFIG_SND_NM256 is not set
# CONFIG_SND_PCXHR is not set
# CONFIG_SND_RIPTIDE is not set
# CONFIG_SND_RME32 is not set
# CONFIG_SND_RME96 is not set
# CONFIG_SND_RME9652 is not set
# CONFIG_SND_SONICVIBES is not set
# CONFIG_SND_TRIDENT is not set
# CONFIG_SND_VIA82XX is not set
# CONFIG_SND_VIA82XX_MODEM is not set
# CONFIG_SND_VIRTUOSO is not set
# CONFIG_SND_VX222 is not set
# CONFIG_SND_YMFPCI is not set
# CONFIG_SND_USB is not set
# CONFIG_SND_SOC is not set
# CONFIG_SOUND_PRIME is not set
CONFIG_HID_SUPPORT=y
CONFIG_HID=y
# CONFIG_HID_DEBUG is not set
# CONFIG_HIDRAW is not set
#
# USB Input Devices
#
CONFIG_USB_HID=y
# CONFIG_HID_PID is not set
CONFIG_USB_HIDDEV=y
#
# Special HID drivers
#
CONFIG_HID_COMPAT=y
CONFIG_HID_A4TECH=y
CONFIG_HID_APPLE=y
CONFIG_HID_BELKIN=y
CONFIG_HID_BRIGHT=y
CONFIG_HID_CHERRY=y
CONFIG_HID_CHICONY=y
CONFIG_HID_CYPRESS=y
CONFIG_HID_DELL=y
CONFIG_HID_EZKEY=y
CONFIG_HID_GYRATION=y
CONFIG_HID_LOGITECH=y
# CONFIG_LOGITECH_FF is not set
# CONFIG_LOGIRUMBLEPAD2_FF is not set
CONFIG_HID_MICROSOFT=y
CONFIG_HID_MONTEREY=y
CONFIG_HID_PANTHERLORD=y
# CONFIG_PANTHERLORD_FF is not set
CONFIG_HID_PETALYNX=y
CONFIG_HID_SAMSUNG=y
CONFIG_HID_SONY=y
CONFIG_HID_SUNPLUS=y
# CONFIG_THRUSTMASTER_FF is not set
# CONFIG_ZEROPLUS_FF is not set
CONFIG_USB_SUPPORT=y
CONFIG_USB_ARCH_HAS_HCD=y
CONFIG_USB_ARCH_HAS_OHCI=y
CONFIG_USB_ARCH_HAS_EHCI=y
CONFIG_USB=y
# CONFIG_USB_DEBUG is not set
# CONFIG_USB_ANNOUNCE_NEW_DEVICES is not set
#
# Miscellaneous USB options
#
CONFIG_USB_DEVICEFS=y
# CONFIG_USB_DEVICE_CLASS is not set
# CONFIG_USB_DYNAMIC_MINORS is not set
CONFIG_USB_SUSPEND=y
# CONFIG_USB_OTG is not set
# CONFIG_USB_MON is not set
# CONFIG_USB_WUSB is not set
# CONFIG_USB_WUSB_CBAF is not set
#
# USB Host Controller Drivers
#
# CONFIG_USB_C67X00_HCD is not set
CONFIG_USB_EHCI_HCD=y
# CONFIG_USB_EHCI_ROOT_HUB_TT is not set
# CONFIG_USB_EHCI_TT_NEWSCHED is not set
# CONFIG_USB_ISP116X_HCD is not set
# CONFIG_USB_ISP1760_HCD is not set
# CONFIG_USB_OHCI_HCD is not set
CONFIG_USB_UHCI_HCD=y
# CONFIG_USB_SL811_HCD is not set
# CONFIG_USB_R8A66597_HCD is not set
# CONFIG_USB_WHCI_HCD is not set
# CONFIG_USB_HWA_HCD is not set
#
# USB Device Class drivers
#
# CONFIG_USB_ACM is not set
CONFIG_USB_PRINTER=y
# CONFIG_USB_WDM is not set
# CONFIG_USB_TMC is not set
#
# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may also be needed;
#
#
# see USB_STORAGE Help for more information
#
CONFIG_USB_STORAGE=y
# CONFIG_USB_STORAGE_DEBUG is not set
# CONFIG_USB_STORAGE_DATAFAB is not set
# CONFIG_USB_STORAGE_FREECOM is not set
# CONFIG_USB_STORAGE_ISD200 is not set
# CONFIG_USB_STORAGE_DPCM is not set
# CONFIG_USB_STORAGE_USBAT is not set
# CONFIG_USB_STORAGE_SDDR09 is not set
# CONFIG_USB_STORAGE_SDDR55 is not set
# CONFIG_USB_STORAGE_JUMPSHOT is not set
# CONFIG_USB_STORAGE_ALAUDA is not set
# CONFIG_USB_STORAGE_ONETOUCH is not set
# CONFIG_USB_STORAGE_KARMA is not set
# CONFIG_USB_STORAGE_CYPRESS_ATACB is not set
# CONFIG_USB_LIBUSUAL is not set
#
# USB Imaging devices
#
# CONFIG_USB_MDC800 is not set
# CONFIG_USB_MICROTEK is not set
#
# USB port drivers
#
# CONFIG_USB_SERIAL is not set
#
# USB Miscellaneous drivers
#
# CONFIG_USB_EMI62 is not set
# CONFIG_USB_EMI26 is not set
# CONFIG_USB_ADUTUX is not set
# CONFIG_USB_SEVSEG is not set
# CONFIG_USB_RIO500 is not set
# CONFIG_USB_LEGOTOWER is not set
# CONFIG_USB_LCD is not set
# CONFIG_USB_BERRY_CHARGE is not set
# CONFIG_USB_LED is not set
# CONFIG_USB_CYPRESS_CY7C63 is not set
# CONFIG_USB_CYTHERM is not set
# CONFIG_USB_PHIDGET is not set
# CONFIG_USB_IDMOUSE is not set
# CONFIG_USB_FTDI_ELAN is not set
# CONFIG_USB_APPLEDISPLAY is not set
# CONFIG_USB_SISUSBVGA is not set
# CONFIG_USB_LD is not set
# CONFIG_USB_TRANCEVIBRATOR is not set
# CONFIG_USB_IOWARRIOR is not set
# CONFIG_USB_TEST is not set
# CONFIG_USB_ISIGHTFW is not set
# CONFIG_USB_VST is not set
# CONFIG_USB_GADGET is not set
# CONFIG_UWB is not set
# CONFIG_MMC is not set
# CONFIG_MEMSTICK is not set
CONFIG_NEW_LEDS=y
CONFIG_LEDS_CLASS=y
#
# LED drivers
#
# CONFIG_LEDS_HP_DISK is not set
# CONFIG_LEDS_CLEVO_MAIL is not set
#
# LED Triggers
#
CONFIG_LEDS_TRIGGERS=y
# CONFIG_LEDS_TRIGGER_TIMER is not set
# CONFIG_LEDS_TRIGGER_IDE_DISK is not set
# CONFIG_LEDS_TRIGGER_HEARTBEAT is not set
# CONFIG_LEDS_TRIGGER_BACKLIGHT is not set
# CONFIG_LEDS_TRIGGER_DEFAULT_ON is not set
# CONFIG_ACCESSIBILITY is not set
# CONFIG_INFINIBAND is not set
# CONFIG_EDAC is not set
# CONFIG_RTC_CLASS is not set
CONFIG_DMADEVICES=y
#
# DMA Devices
#
# CONFIG_INTEL_IOATDMA is not set
# CONFIG_UIO is not set
# CONFIG_STAGING is not set
#
# Firmware Drivers
#
# CONFIG_EDD is not set
CONFIG_FIRMWARE_MEMMAP=y
# CONFIG_DELL_RBU is not set
# CONFIG_DCDBAS is not set
# CONFIG_DMIID is not set
# CONFIG_ISCSI_IBFT_FIND is not set
#
# File systems
#
CONFIG_EXT2_FS=y
CONFIG_EXT2_FS_XATTR=y
CONFIG_EXT2_FS_POSIX_ACL=y
# CONFIG_EXT2_FS_SECURITY is not set
# CONFIG_EXT2_FS_XIP is not set
CONFIG_EXT3_FS=y
CONFIG_EXT3_FS_XATTR=y
CONFIG_EXT3_FS_POSIX_ACL=y
# CONFIG_EXT3_FS_SECURITY is not set
CONFIG_EXT4_FS=y
# CONFIG_EXT4DEV_COMPAT is not set
CONFIG_EXT4_FS_XATTR=y
CONFIG_EXT4_FS_POSIX_ACL=y
# CONFIG_EXT4_FS_SECURITY is not set
CONFIG_JBD=y
# CONFIG_JBD_DEBUG is not set
CONFIG_JBD2=y
# CONFIG_JBD2_DEBUG is not set
CONFIG_FS_MBCACHE=y
# CONFIG_REISERFS_FS is not set
# CONFIG_JFS_FS is not set
CONFIG_FS_POSIX_ACL=y
CONFIG_FILE_LOCKING=y
# CONFIG_XFS_FS is not set
# CONFIG_GFS2_FS is not set
# CONFIG_OCFS2_FS is not set
CONFIG_DNOTIFY=y
CONFIG_INOTIFY=y
CONFIG_INOTIFY_USER=y
# CONFIG_QUOTA is not set
# CONFIG_AUTOFS_FS is not set
CONFIG_AUTOFS4_FS=y
CONFIG_FUSE_FS=m
CONFIG_GENERIC_ACL=y
#
# CD-ROM/DVD Filesystems
#
CONFIG_ISO9660_FS=y
CONFIG_JOLIET=y
# CONFIG_ZISOFS is not set
# CONFIG_UDF_FS is not set
#
# DOS/FAT/NT Filesystems
#
CONFIG_FAT_FS=y
CONFIG_MSDOS_FS=y
CONFIG_VFAT_FS=y
CONFIG_FAT_DEFAULT_CODEPAGE=437
CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1"
CONFIG_NTFS_FS=y
CONFIG_NTFS_DEBUG=y
CONFIG_NTFS_RW=y
#
# Pseudo filesystems
#
CONFIG_PROC_FS=y
CONFIG_PROC_KCORE=y
# CONFIG_PROC_VMCORE is not set
CONFIG_PROC_SYSCTL=y
CONFIG_PROC_PAGE_MONITOR=y
CONFIG_SYSFS=y
CONFIG_TMPFS=y
CONFIG_TMPFS_POSIX_ACL=y
# CONFIG_HUGETLBFS is not set
# CONFIG_HUGETLB_PAGE is not set
CONFIG_CONFIGFS_FS=y
#
# Miscellaneous filesystems
#
# CONFIG_ADFS_FS is not set
# CONFIG_AFFS_FS is not set
# CONFIG_HFS_FS is not set
# CONFIG_HFSPLUS_FS is not set
# CONFIG_BEFS_FS is not set
# CONFIG_BFS_FS is not set
# CONFIG_EFS_FS is not set
CONFIG_CRAMFS=m
# CONFIG_VXFS_FS is not set
# CONFIG_MINIX_FS is not set
# CONFIG_OMFS_FS is not set
# CONFIG_HPFS_FS is not set
# CONFIG_QNX4FS_FS is not set
# CONFIG_ROMFS_FS is not set
# CONFIG_SYSV_FS is not set
# CONFIG_UFS_FS is not set
CONFIG_NETWORK_FILESYSTEMS=y
CONFIG_NFS_FS=y
CONFIG_NFS_V3=y
# CONFIG_NFS_V3_ACL is not set
# CONFIG_NFS_V4 is not set
CONFIG_NFSD=m
CONFIG_NFSD_V3=y
# CONFIG_NFSD_V3_ACL is not set
# CONFIG_NFSD_V4 is not set
CONFIG_LOCKD=y
CONFIG_LOCKD_V4=y
CONFIG_EXPORTFS=m
CONFIG_NFS_COMMON=y
CONFIG_SUNRPC=y
# CONFIG_SUNRPC_REGISTER_V4 is not set
# CONFIG_RPCSEC_GSS_KRB5 is not set
# CONFIG_RPCSEC_GSS_SPKM3 is not set
# CONFIG_SMB_FS is not set
CONFIG_CIFS=m
CONFIG_CIFS_STATS=y
# CONFIG_CIFS_STATS2 is not set
# CONFIG_CIFS_WEAK_PW_HASH is not set
# CONFIG_CIFS_XATTR is not set
# CONFIG_CIFS_DEBUG2 is not set
# CONFIG_CIFS_EXPERIMENTAL is not set
# CONFIG_NCP_FS is not set
# CONFIG_CODA_FS is not set
# CONFIG_AFS_FS is not set
#
# Partition Types
#
# CONFIG_PARTITION_ADVANCED is not set
CONFIG_MSDOS_PARTITION=y
CONFIG_NLS=y
CONFIG_NLS_DEFAULT="iso8859-1"
CONFIG_NLS_CODEPAGE_437=y
# CONFIG_NLS_CODEPAGE_737 is not set
# CONFIG_NLS_CODEPAGE_775 is not set
# CONFIG_NLS_CODEPAGE_850 is not set
# CONFIG_NLS_CODEPAGE_852 is not set
# CONFIG_NLS_CODEPAGE_855 is not set
# CONFIG_NLS_CODEPAGE_857 is not set
# CONFIG_NLS_CODEPAGE_860 is not set
# CONFIG_NLS_CODEPAGE_861 is not set
# CONFIG_NLS_CODEPAGE_862 is not set
# CONFIG_NLS_CODEPAGE_863 is not set
# CONFIG_NLS_CODEPAGE_864 is not set
# CONFIG_NLS_CODEPAGE_865 is not set
# CONFIG_NLS_CODEPAGE_866 is not set
# CONFIG_NLS_CODEPAGE_869 is not set
# CONFIG_NLS_CODEPAGE_936 is not set
# CONFIG_NLS_CODEPAGE_950 is not set
# CONFIG_NLS_CODEPAGE_932 is not set
# CONFIG_NLS_CODEPAGE_949 is not set
# CONFIG_NLS_CODEPAGE_874 is not set
# CONFIG_NLS_ISO8859_8 is not set
# CONFIG_NLS_CODEPAGE_1250 is not set
# CONFIG_NLS_CODEPAGE_1251 is not set
CONFIG_NLS_ASCII=y
CONFIG_NLS_ISO8859_1=y
# CONFIG_NLS_ISO8859_2 is not set
# CONFIG_NLS_ISO8859_3 is not set
# CONFIG_NLS_ISO8859_4 is not set
# CONFIG_NLS_ISO8859_5 is not set
# CONFIG_NLS_ISO8859_6 is not set
# CONFIG_NLS_ISO8859_7 is not set
# CONFIG_NLS_ISO8859_9 is not set
# CONFIG_NLS_ISO8859_13 is not set
# CONFIG_NLS_ISO8859_14 is not set
CONFIG_NLS_ISO8859_15=y
# CONFIG_NLS_KOI8_R is not set
# CONFIG_NLS_KOI8_U is not set
CONFIG_NLS_UTF8=y
# CONFIG_DLM is not set
#
# Kernel hacking
#
CONFIG_TRACE_IRQFLAGS_SUPPORT=y
CONFIG_PRINTK_TIME=y
# CONFIG_ENABLE_WARN_DEPRECATED is not set
# CONFIG_ENABLE_MUST_CHECK is not set
CONFIG_FRAME_WARN=2048
CONFIG_MAGIC_SYSRQ=y
CONFIG_UNUSED_SYMBOLS=y
CONFIG_DEBUG_FS=y
CONFIG_HEADERS_CHECK=y
# CONFIG_DEBUG_KERNEL is not set
CONFIG_SCHED_DEBUG=y
CONFIG_SCHEDSTATS=y
CONFIG_STACKTRACE=y
CONFIG_DEBUG_BUGVERBOSE=y
CONFIG_DEBUG_MEMORY_INIT=y
CONFIG_FRAME_POINTER=y
# CONFIG_RCU_CPU_STALL_DETECTOR is not set
CONFIG_LATENCYTOP=y
CONFIG_SYSCTL_SYSCALL_CHECK=y
CONFIG_HAVE_FUNCTION_TRACER=y
CONFIG_HAVE_DYNAMIC_FTRACE=y
CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
#
# Tracers
#
# CONFIG_SYSPROF_TRACER is not set
# CONFIG_PROVIDE_OHCI1394_DMA_INIT is not set
# CONFIG_BUILD_DOCSRC is not set
# CONFIG_DYNAMIC_PRINTK_DEBUG is not set
# CONFIG_SAMPLES is not set
CONFIG_HAVE_ARCH_KGDB=y
# CONFIG_STRICT_DEVMEM is not set
# CONFIG_X86_VERBOSE_BOOTUP is not set
CONFIG_EARLY_PRINTK=y
# CONFIG_EARLY_PRINTK_DBGP is not set
CONFIG_IO_DELAY_TYPE_0X80=0
CONFIG_IO_DELAY_TYPE_0XED=1
CONFIG_IO_DELAY_TYPE_UDELAY=2
CONFIG_IO_DELAY_TYPE_NONE=3
CONFIG_IO_DELAY_0X80=y
# CONFIG_IO_DELAY_0XED is not set
# CONFIG_IO_DELAY_UDELAY is not set
# CONFIG_IO_DELAY_NONE is not set
CONFIG_DEFAULT_IO_DELAY_TYPE=0
CONFIG_OPTIMIZE_INLINING=y
#
# Security options
#
# CONFIG_KEYS is not set
# CONFIG_SECURITY is not set
# CONFIG_SECURITYFS is not set
# CONFIG_SECURITY_FILE_CAPABILITIES is not set
CONFIG_CRYPTO=y
#
# Crypto core or helper
#
# CONFIG_CRYPTO_FIPS is not set
CONFIG_CRYPTO_ALGAPI=y
CONFIG_CRYPTO_ALGAPI2=y
CONFIG_CRYPTO_AEAD2=y
CONFIG_CRYPTO_BLKCIPHER=y
CONFIG_CRYPTO_BLKCIPHER2=y
CONFIG_CRYPTO_HASH2=y
CONFIG_CRYPTO_RNG2=y
CONFIG_CRYPTO_MANAGER=y
CONFIG_CRYPTO_MANAGER2=y
# CONFIG_CRYPTO_GF128MUL is not set
# CONFIG_CRYPTO_NULL is not set
# CONFIG_CRYPTO_CRYPTD is not set
# CONFIG_CRYPTO_AUTHENC is not set
# CONFIG_CRYPTO_TEST is not set
#
# Authenticated Encryption with Associated Data
#
# CONFIG_CRYPTO_CCM is not set
# CONFIG_CRYPTO_GCM is not set
# CONFIG_CRYPTO_SEQIV is not set
#
# Block modes
#
# CONFIG_CRYPTO_CBC is not set
# CONFIG_CRYPTO_CTR is not set
# CONFIG_CRYPTO_CTS is not set
CONFIG_CRYPTO_ECB=y
# CONFIG_CRYPTO_LRW is not set
# CONFIG_CRYPTO_PCBC is not set
# CONFIG_CRYPTO_XTS is not set
#
# Hash modes
#
# CONFIG_CRYPTO_HMAC is not set
# CONFIG_CRYPTO_XCBC is not set
#
# Digest
#
# CONFIG_CRYPTO_CRC32C is not set
# CONFIG_CRYPTO_CRC32C_INTEL is not set
# CONFIG_CRYPTO_MD4 is not set
# CONFIG_CRYPTO_MD5 is not set
CONFIG_CRYPTO_MICHAEL_MIC=m
# CONFIG_CRYPTO_RMD128 is not set
# CONFIG_CRYPTO_RMD160 is not set
# CONFIG_CRYPTO_RMD256 is not set
# CONFIG_CRYPTO_RMD320 is not set
# CONFIG_CRYPTO_SHA1 is not set
# CONFIG_CRYPTO_SHA256 is not set
# CONFIG_CRYPTO_SHA512 is not set
# CONFIG_CRYPTO_TGR192 is not set
# CONFIG_CRYPTO_WP512 is not set
#
# Ciphers
#
CONFIG_CRYPTO_AES=y
# CONFIG_CRYPTO_AES_X86_64 is not set
# CONFIG_CRYPTO_ANUBIS is not set
CONFIG_CRYPTO_ARC4=y
# CONFIG_CRYPTO_BLOWFISH is not set
# CONFIG_CRYPTO_CAMELLIA is not set
# CONFIG_CRYPTO_CAST5 is not set
# CONFIG_CRYPTO_CAST6 is not set
# CONFIG_CRYPTO_DES is not set
# CONFIG_CRYPTO_FCRYPT is not set
# CONFIG_CRYPTO_KHAZAD is not set
# CONFIG_CRYPTO_SALSA20 is not set
# CONFIG_CRYPTO_SALSA20_X86_64 is not set
# CONFIG_CRYPTO_SEED is not set
# CONFIG_CRYPTO_SERPENT is not set
# CONFIG_CRYPTO_TEA is not set
# CONFIG_CRYPTO_TWOFISH is not set
# CONFIG_CRYPTO_TWOFISH_X86_64 is not set
#
# Compression
#
# CONFIG_CRYPTO_DEFLATE is not set
# CONFIG_CRYPTO_LZO is not set
#
# Random Number Generation
#
# CONFIG_CRYPTO_ANSI_CPRNG is not set
# CONFIG_CRYPTO_HW is not set
CONFIG_HAVE_KVM=y
CONFIG_VIRTUALIZATION=y
CONFIG_KVM=m
CONFIG_KVM_INTEL=m
# CONFIG_KVM_AMD is not set
# CONFIG_VIRTIO_PCI is not set
# CONFIG_VIRTIO_BALLOON is not set
#
# Library routines
#
CONFIG_BITREVERSE=y
CONFIG_GENERIC_FIND_FIRST_BIT=y
CONFIG_GENERIC_FIND_NEXT_BIT=y
# CONFIG_CRC_CCITT is not set
CONFIG_CRC16=y
CONFIG_CRC_T10DIF=y
# CONFIG_CRC_ITU_T is not set
CONFIG_CRC32=y
# CONFIG_CRC7 is not set
# CONFIG_LIBCRC32C is not set
CONFIG_ZLIB_INFLATE=m
CONFIG_PLIST=y
CONFIG_HAS_IOMEM=y
CONFIG_HAS_IOPORT=y
CONFIG_HAS_DMA=y
lspci -vvv
00:00.0 Host bridge: Intel Corporation 82P965/G965 Memory Controller Hub
(rev 02)
Subsystem: Giga-byte Technology Device 5000
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort+ >SERR- <PERR- INTx-
Latency: 0
Capabilities: <access denied>
00:01.0 PCI bridge: Intel Corporation 82P965/G965 PCI Express Root Port
(rev 02)
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 32 bytes
Bus: primary=00, secondary=01, subordinate=01, sec-latency=0
I/O behind bridge: 00008000-00008fff
Memory behind bridge: f0000000-f2ffffff
Prefetchable memory behind bridge: 00000000e0000000-00000000efffffff
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- <SERR- <PERR-
BridgeCtl: Parity- SERR- NoISA- VGA+ MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
Kernel driver in use: pcieport-driver
00:1a.0 USB Controller: Intel Corporation 82801H (ICH8 Family) USB UHCI
Controller #4 (rev 02)
Subsystem: Giga-byte Technology Device 5004
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 16
Region 4: I/O ports at c000 [size=32]
Kernel driver in use: uhci_hcd
00:1a.1 USB Controller: Intel Corporation 82801H (ICH8 Family) USB UHCI
Controller #5 (rev 02)
Subsystem: Giga-byte Technology Device 5004
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin B routed to IRQ 21
Region 4: I/O ports at c400 [size=32]
Kernel driver in use: uhci_hcd
00:1a.7 USB Controller: Intel Corporation 82801H (ICH8 Family) USB2 EHCI
Controller #2 (rev 02) (prog-if 20)
Subsystem: Giga-byte Technology Device 5006
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin C routed to IRQ 18
Region 0: Memory at f5205000 (32-bit, non-prefetchable) [size=1K]
Capabilities: <access denied>
Kernel driver in use: ehci_hcd
00:1b.0 Audio device: Intel Corporation 82801H (ICH8 Family) HD Audio
Controller (rev 02)
Subsystem: Giga-byte Technology Device a002
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 32 bytes
Interrupt: pin A routed to IRQ 22
Region 0: Memory at f5200000 (64-bit, non-prefetchable) [size=16K]
Capabilities: <access denied>
Kernel driver in use: HDA Intel
00:1c.0 PCI bridge: Intel Corporation 82801H (ICH8 Family) PCI Express
Port 1 (rev 02)
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 32 bytes
Bus: primary=00, secondary=02, subordinate=02, sec-latency=0
I/O behind bridge: 00007000-00007fff
Memory behind bridge: fff00000-000fffff
Prefetchable memory behind bridge: 00000000fff00000-00000000000fffff
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- <SERR- <PERR-
BridgeCtl: Parity- SERR- NoISA+ VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
Kernel driver in use: pcieport-driver
00:1c.3 PCI bridge: Intel Corporation 82801H (ICH8 Family) PCI Express
Port 4 (rev 02)
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 32 bytes
Bus: primary=00, secondary=03, subordinate=03, sec-latency=0
I/O behind bridge: 00009000-0000afff
Memory behind bridge: f5000000-f50fffff
Prefetchable memory behind bridge: 00000000fff00000-00000000000fffff
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- <SERR- <PERR-
BridgeCtl: Parity- SERR- NoISA+ VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
Kernel driver in use: pcieport-driver
00:1c.4 PCI bridge: Intel Corporation 82801H (ICH8 Family) PCI Express
Port 5 (rev 02)
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 32 bytes
Bus: primary=00, secondary=04, subordinate=04, sec-latency=0
I/O behind bridge: 0000b000-0000bfff
Memory behind bridge: f3000000-f4ffffff
Prefetchable memory behind bridge: 00000000f5300000-00000000f53fffff
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- <SERR- <PERR-
BridgeCtl: Parity- SERR- NoISA+ VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
Kernel driver in use: pcieport-driver
00:1d.0 USB Controller: Intel Corporation 82801H (ICH8 Family) USB UHCI
Controller #1 (rev 02)
Subsystem: Giga-byte Technology Device 5004
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 23
Region 4: I/O ports at c800 [size=32]
Kernel driver in use: uhci_hcd
00:1d.1 USB Controller: Intel Corporation 82801H (ICH8 Family) USB UHCI
Controller #2 (rev 02)
Subsystem: Giga-byte Technology Device 5004
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin B routed to IRQ 19
Region 4: I/O ports at cc00 [size=32]
Kernel driver in use: uhci_hcd
00:1d.2 USB Controller: Intel Corporation 82801H (ICH8 Family) USB UHCI
Controller #3 (rev 02)
Subsystem: Giga-byte Technology Device 5004
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin C routed to IRQ 18
Region 4: I/O ports at d000 [size=32]
Kernel driver in use: uhci_hcd
00:1d.7 USB Controller: Intel Corporation 82801H (ICH8 Family) USB2 EHCI
Controller #1 (rev 02) (prog-if 20)
Subsystem: Giga-byte Technology Device 5006
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 23
Region 0: Memory at f5204000 (32-bit, non-prefetchable) [size=1K]
Capabilities: <access denied>
Kernel driver in use: ehci_hcd
00:1e.0 PCI bridge: Intel Corporation 82801 PCI Bridge (rev f2) (prog-if 01)
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0
Bus: primary=00, secondary=05, subordinate=05, sec-latency=32
I/O behind bridge: 0000f000-00000fff
Memory behind bridge: f5100000-f51fffff
Prefetchable memory behind bridge: 00000000fff00000-00000000000fffff
Secondary status: 66MHz- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort+ <SERR- <PERR-
BridgeCtl: Parity- SERR- NoISA+ VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
00:1f.0 ISA bridge: Intel Corporation 82801HB/HR (ICH8/R) LPC Interface
Controller (rev 02)
Subsystem: Giga-byte Technology Device 5001
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR+ FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Capabilities: <access denied>
00:1f.2 IDE interface: Intel Corporation 82801H (ICH8 Family) 4 port
SATA IDE Controller (rev 02) (prog-if 8a [Master SecP PriP])
Subsystem: Giga-byte Technology Device b002
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin B routed to IRQ 19
Region 0: I/O ports at 01f0 [size=8]
Region 1: I/O ports at 03f4 [size=1]
Region 2: I/O ports at 0170 [size=8]
Region 3: I/O ports at 0374 [size=1]
Region 4: I/O ports at f000 [size=16]
Region 5: I/O ports at fc00 [size=16]
Capabilities: <access denied>
Kernel driver in use: ata_piix
Kernel modules: ide-pci-generic
00:1f.3 SMBus: Intel Corporation 82801H (ICH8 Family) SMBus Controller
(rev 02)
Subsystem: Giga-byte Technology Device 5001
Control: I/O+ Mem+ BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Interrupt: pin C routed to IRQ 9
Region 0: Memory at f5206000 (32-bit, non-prefetchable) [size=256]
Region 4: I/O ports at 0500 [size=32]
00:1f.5 IDE interface: Intel Corporation 82801H (ICH8 Family) 2 port
SATA IDE Controller (rev 02) (prog-if 85 [Master SecO PriO])
Subsystem: Giga-byte Technology Device b002
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin B routed to IRQ 19
Region 0: I/O ports at d800 [size=8]
Region 1: I/O ports at dc00 [size=4]
Region 2: I/O ports at e000 [size=8]
Region 3: I/O ports at e400 [size=4]
Region 4: I/O ports at e800 [size=16]
Region 5: I/O ports at ec00 [size=16]
Capabilities: <access denied>
Kernel driver in use: ata_piix
Kernel modules: ide-pci-generic
01:00.0 VGA compatible controller: nVidia Corporation G71 [GeForce 7900
GS] (rev a1)
Subsystem: eVga.com. Corp. Device c624
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 16
Region 0: Memory at f0000000 (32-bit, non-prefetchable) [size=16M]
Region 1: Memory at e0000000 (64-bit, prefetchable) [size=256M]
Region 3: Memory at f1000000 (64-bit, non-prefetchable) [size=16M]
Region 5: I/O ports at 8000 [size=128]
[virtual] Expansion ROM at f2000000 [disabled] [size=128K]
Capabilities: <access denied>
Kernel driver in use: nvidia
Kernel modules: nvidia
03:00.0 SATA controller: JMicron Technologies, Inc. JMicron 20360/20363
AHCI Controller (rev 02) (prog-if 01)
Subsystem: Giga-byte Technology Device b000
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 32 bytes
Interrupt: pin A routed to IRQ 11
Region 5: Memory at f5000000 (32-bit, non-prefetchable) [size=8K]
Capabilities: <access denied>
03:00.1 IDE interface: JMicron Technologies, Inc. JMicron 20360/20363
AHCI Controller (rev 02) (prog-if 85 [Master SecO PriO])
Subsystem: Giga-byte Technology Device b000
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin B routed to IRQ 16
Region 0: I/O ports at 9000 [size=8]
Region 1: I/O ports at 9400 [size=4]
Region 2: I/O ports at 9800 [size=8]
Region 3: I/O ports at 9c00 [size=4]
Region 4: I/O ports at a000 [size=16]
Capabilities: <access denied>
Kernel driver in use: JMicron IDE
Kernel modules: ide-pci-generic
04:00.0 Ethernet controller: Marvell Technology Group Ltd. 88E8053 PCI-E
Gigabit Ethernet Controller (rev 22)
Subsystem: Giga-byte Technology Device e000
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 32 bytes
Interrupt: pin A routed to IRQ 315
Region 0: Memory at f4000000 (64-bit, non-prefetchable) [size=16K]
Region 2: I/O ports at b000 [size=256]
[virtual] Expansion ROM at f5300000 [disabled] [size=128K]
Capabilities: <access denied>
Kernel driver in use: sky2
Kernel modules: sky2
05:01.0 Network controller: Broadcom Corporation BCM4318 [AirForce One
54g] 802.11g Wireless LAN Controller (rev 02)
Subsystem: Belkin Device 7c0a
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 32
Interrupt: pin A routed to IRQ 19
Region 0: Memory at f5100000 (32-bit, non-prefetchable) [size=8K]
Kernel driver in use: b43-pci-bridge
Kernel modules: ssb
^ permalink raw reply [flat|nested] only message in thread
only message in thread, other threads:[~2009-02-10 22:20 UTC | newest]
Thread overview: (only message) (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
2009-02-10 22:20 b43: extreme latency on 2.6.28.3 John Daiker
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.