From: Yang Hongyang <yanghy@cn.fujitsu.com>
To: Andrew Morton <akpm@linux-foundation.org>,
"David S. Miller" <davem@davemloft.net>
Cc: linux-kernel@vger.kernel.org, netdev@vger.kernel.org,
Borislav Petkov <petkovbb@googlemail.com>
Subject: [PATCH 08/12]Replace all DMA_30BIT_MASK micro with DMA_BIT_MASK(30)
Date: Thu, 19 Feb 2009 14:49:45 +0800 [thread overview]
Message-ID: <499D0109.5070502@cn.fujitsu.com> (raw)
In-Reply-To: <499CFDC8.1070600@cn.fujitsu.com>
Replace all DMA_30BIT_MASK micro with DMA_BIT_MASK(30)
Signed-off-by: Yang Hongyang<yanghy@cn.fujitsu.com>
---
drivers/net/b44.c | 14 +++++++-------
drivers/net/wireless/b43/dma.c | 6 +++---
drivers/net/wireless/b43legacy/dma.c | 6 +++---
sound/pci/sis7019.c | 2 +-
sound/pci/trident/trident_main.c | 4 ++--
5 files changed, 16 insertions(+), 16 deletions(-)
diff --git a/drivers/net/b44.c b/drivers/net/b44.c
index c38512e..025fa38 100644
--- a/drivers/net/b44.c
+++ b/drivers/net/b44.c
@@ -660,7 +660,7 @@ static int b44_alloc_rx_skb(struct b44 *bp, int src_idx, u32 dest_idx_unmasked)
/* Hardware bug work-around, the chip is unable to do PCI DMA
to/from anything above 1GB :-( */
if (ssb_dma_mapping_error(bp->sdev, mapping) ||
- mapping + RX_PKT_BUF_SZ > DMA_30BIT_MASK) {
+ mapping + RX_PKT_BUF_SZ > DMA_BIT_MASK(30)) {
/* Sigh... */
if (!ssb_dma_mapping_error(bp->sdev, mapping))
ssb_dma_unmap_single(bp->sdev, mapping,
@@ -673,7 +673,7 @@ static int b44_alloc_rx_skb(struct b44 *bp, int src_idx, u32 dest_idx_unmasked)
RX_PKT_BUF_SZ,
DMA_FROM_DEVICE);
if (ssb_dma_mapping_error(bp->sdev, mapping) ||
- mapping + RX_PKT_BUF_SZ > DMA_30BIT_MASK) {
+ mapping + RX_PKT_BUF_SZ > DMA_BIT_MASK(30)) {
if (!ssb_dma_mapping_error(bp->sdev, mapping))
ssb_dma_unmap_single(bp->sdev, mapping, RX_PKT_BUF_SZ,DMA_FROM_DEVICE);
dev_kfree_skb_any(skb);
@@ -965,7 +965,7 @@ static int b44_start_xmit(struct sk_buff *skb, struct net_device *dev)
}
mapping = ssb_dma_map_single(bp->sdev, skb->data, len, DMA_TO_DEVICE);
- if (ssb_dma_mapping_error(bp->sdev, mapping) || mapping + len > DMA_30BIT_MASK) {
+ if (ssb_dma_mapping_error(bp->sdev, mapping) || mapping + len > DMA_BIT_MASK(30)) {
struct sk_buff *bounce_skb;
/* Chip can't handle DMA to/from >1GB, use bounce buffer */
@@ -979,7 +979,7 @@ static int b44_start_xmit(struct sk_buff *skb, struct net_device *dev)
mapping = ssb_dma_map_single(bp->sdev, bounce_skb->data,
len, DMA_TO_DEVICE);
- if (ssb_dma_mapping_error(bp->sdev, mapping) || mapping + len > DMA_30BIT_MASK) {
+ if (ssb_dma_mapping_error(bp->sdev, mapping) || mapping + len > DMA_BIT_MASK(30)) {
if (!ssb_dma_mapping_error(bp->sdev, mapping))
ssb_dma_unmap_single(bp->sdev, mapping,
len, DMA_TO_DEVICE);
@@ -1204,7 +1204,7 @@ static int b44_alloc_consistent(struct b44 *bp, gfp_t gfp)
DMA_BIDIRECTIONAL);
if (ssb_dma_mapping_error(bp->sdev, rx_ring_dma) ||
- rx_ring_dma + size > DMA_30BIT_MASK) {
+ rx_ring_dma + size > DMA_BIT_MASK(30)) {
kfree(rx_ring);
goto out_err;
}
@@ -1231,7 +1231,7 @@ static int b44_alloc_consistent(struct b44 *bp, gfp_t gfp)
DMA_TO_DEVICE);
if (ssb_dma_mapping_error(bp->sdev, tx_ring_dma) ||
- tx_ring_dma + size > DMA_30BIT_MASK) {
+ tx_ring_dma + size > DMA_BIT_MASK(30)) {
kfree(tx_ring);
goto out_err;
}
@@ -2176,7 +2176,7 @@ static int __devinit b44_init_one(struct ssb_device *sdev,
"Failed to powerup the bus\n");
goto err_out_free_dev;
}
- err = ssb_dma_set_mask(sdev, DMA_30BIT_MASK);
+ err = ssb_dma_set_mask(sdev, DMA_BIT_MASK(30));
if (err) {
dev_err(sdev->dev,
"Required 30BIT DMA mask unsupported by the system.\n");
diff --git a/drivers/net/wireless/b43/dma.c b/drivers/net/wireless/b43/dma.c
index 87671d8..a1195e4 100644
--- a/drivers/net/wireless/b43/dma.c
+++ b/drivers/net/wireless/b43/dma.c
@@ -776,12 +776,12 @@ static u64 supported_dma_mask(struct b43_wldev *dev)
if (tmp & B43_DMA32_TXADDREXT_MASK)
return DMA_BIT_MASK(32);
- return DMA_30BIT_MASK;
+ return DMA_BIT_MASK(30);
}
static enum b43_dmatype dma_mask_to_engine_type(u64 dmamask)
{
- if (dmamask == DMA_30BIT_MASK)
+ if (dmamask == DMA_BIT_MASK(30))
return B43_DMA_30BIT;
if (dmamask == DMA_BIT_MASK(32))
return B43_DMA_32BIT;
@@ -1002,7 +1002,7 @@ static int b43_dma_set_mask(struct b43_wldev *dev, u64 mask)
continue;
}
if (mask == DMA_BIT_MASK(32)) {
- mask = DMA_30BIT_MASK;
+ mask = DMA_BIT_MASK(30);
fallback = 1;
continue;
}
diff --git a/drivers/net/wireless/b43legacy/dma.c b/drivers/net/wireless/b43legacy/dma.c
index 1d3e0d2..2f90fb9 100644
--- a/drivers/net/wireless/b43legacy/dma.c
+++ b/drivers/net/wireless/b43legacy/dma.c
@@ -856,12 +856,12 @@ static u64 supported_dma_mask(struct b43legacy_wldev *dev)
if (tmp & B43legacy_DMA32_TXADDREXT_MASK)
return DMA_BIT_MASK(32);
- return DMA_30BIT_MASK;
+ return DMA_BIT_MASK(30);
}
static enum b43legacy_dmatype dma_mask_to_engine_type(u64 dmamask)
{
- if (dmamask == DMA_30BIT_MASK)
+ if (dmamask == DMA_BIT_MASK(30))
return B43legacy_DMA_30BIT;
if (dmamask == DMA_BIT_MASK(32))
return B43legacy_DMA_32BIT;
@@ -1048,7 +1048,7 @@ static int b43legacy_dma_set_mask(struct b43legacy_wldev *dev, u64 mask)
continue;
}
if (mask == DMA_BIT_MASK(32)) {
- mask = DMA_30BIT_MASK;
+ mask = DMA_BIT_MASK(30);
fallback = 1;
continue;
}
diff --git a/sound/pci/sis7019.c b/sound/pci/sis7019.c
index df2007e..c802652 100644
--- a/sound/pci/sis7019.c
+++ b/sound/pci/sis7019.c
@@ -1300,7 +1300,7 @@ static int __devinit sis_chip_create(struct snd_card *card,
if (rc)
goto error_out;
- if (pci_set_dma_mask(pci, DMA_30BIT_MASK) < 0) {
+ if (pci_set_dma_mask(pci, DMA_BIT_MASK(30)) < 0) {
printk(KERN_ERR "sis7019: architecture does not support "
"30-bit PCI busmaster DMA");
goto error_out_enabled;
diff --git a/sound/pci/trident/trident_main.c b/sound/pci/trident/trident_main.c
index c612b43..1724789 100644
--- a/sound/pci/trident/trident_main.c
+++ b/sound/pci/trident/trident_main.c
@@ -3554,8 +3554,8 @@ int __devinit snd_trident_create(struct snd_card *card,
if ((err = pci_enable_device(pci)) < 0)
return err;
/* check, if we can restrict PCI DMA transfers to 30 bits */
- if (pci_set_dma_mask(pci, DMA_30BIT_MASK) < 0 ||
- pci_set_consistent_dma_mask(pci, DMA_30BIT_MASK) < 0) {
+ if (pci_set_dma_mask(pci, DMA_BIT_MASK(30)) < 0 ||
+ pci_set_consistent_dma_mask(pci, DMA_BIT_MASK(30)) < 0) {
snd_printk(KERN_ERR "architecture does not support 30bit PCI busmaster DMA\n");
pci_disable_device(pci);
return -ENXIO;
--
1.6.0.3
--
Regards
Yang Hongyang
next prev parent reply other threads:[~2009-02-19 6:48 UTC|newest]
Thread overview: 34+ messages / expand[flat|nested] mbox.gz Atom feed top
2009-02-19 6:35 [PATCH 00/12]Next:Get rid of all the old micro DMA_XXBIT_MASK and use DMA_BIT_MASK(n) instead Yang Hongyang
2009-02-19 6:38 ` [PATCH 01/12]Replace all DMA_64BIT_MASK micro with DMA_BIT_MASK(64) Yang Hongyang
2009-02-19 6:40 ` [PATCH 02/12]Replace all DMA_48BIT_MASK micro with DMA_BIT_MASK(48) Yang Hongyang
2009-02-19 6:41 ` [PATCH 03/12]Replace all DMA_40BIT_MASK micro with DMA_BIT_MASK(40) Yang Hongyang
2009-02-19 6:44 ` [PATCH 04/12]Replace all DMA_39BIT_MASK micro with DMA_BIT_MASK(39) Yang Hongyang
2009-02-19 6:45 ` [PATCH 05/12]Replace all DMA_35BIT_MASK micro with DMA_BIT_MASK(35) Yang Hongyang
2009-02-19 6:46 ` [PATCH 06/12]Replace all DMA_32BIT_MASK micro with DMA_BIT_MASK(32) Yang Hongyang
2009-02-19 6:48 ` [PATCH 07/12]Replace all DMA_31BIT_MASK micro with DMA_BIT_MASK(31) Yang Hongyang
2009-02-19 6:49 ` [PATCH 00/12]Next:Get rid of all the old micro DMA_XXBIT_MASK and use DMA_BIT_MASK(n) instead Américo Wang
2009-02-19 8:52 ` Yang Hongyang
2009-02-19 6:49 ` Yang Hongyang [this message]
2009-02-19 6:51 ` [PATCH 09/12]Replace all DMA_28BIT_MASK micro with DMA_BIT_MASK(28) Yang Hongyang
2009-02-19 6:53 ` [PATCH 10/12]Replace all DMA_24BIT_MASK micro with DMA_BIT_MASK(24) Yang Hongyang
2009-02-19 6:54 ` [PATCH 11/12]Remove defines of DMA_XXBIT_MASK micro Yang Hongyang
2009-02-19 8:14 ` Ingo Molnar
2009-02-19 8:56 ` Yang Hongyang
2009-02-19 9:32 ` [PATCHv2 00/11]Get rid of all the old macro DMA_nBIT_MASK and use DMA_BIT_MASK(n) instead Yang Hongyang
2009-02-19 9:36 ` [PATCHv2 01/11]Replace all DMA_64BIT_MASK macro with DMA_BIT_MASK(64) Yang Hongyang
2009-02-19 9:38 ` [PATCHv2 02/11]Replace all DMA_48BIT_MASK macro with DMA_BIT_MASK(48) Yang Hongyang
2009-02-19 9:40 ` [PATCHv2 03/11]Replace all DMA_40BIT_MASK macro with DMA_BIT_MASK(40) Yang Hongyang
2009-02-19 9:42 ` [PATCHv2 04/11]Replace all DMA_39BIT_MASK macro with DMA_BIT_MASK(39) Yang Hongyang
2009-02-19 9:43 ` [PATCHv2 05/11]Replace all DMA_35BIT_MASK macro with DMA_BIT_MASK(35) Yang Hongyang
2009-02-19 9:45 ` [PATCHv2 06/11]Replace all DMA_32BIT_MASK macro with DMA_BIT_MASK(32) Yang Hongyang
2009-02-19 12:50 ` Stefan Richter
2009-02-19 9:47 ` [PATCHv2 07/11]Replace all DMA_31BIT_MASK macro with DMA_BIT_MASK(31) Yang Hongyang
2009-02-19 9:48 ` [PATCHv2 08/11]Replace all DMA_30BIT_MASK macro with DMA_BIT_MASK(30) Yang Hongyang
2009-02-19 9:50 ` [PATCHv2 09/11]Replace all DMA_28BIT_MASK macro with DMA_BIT_MASK(28) Yang Hongyang
2009-02-19 9:51 ` [PATCHv2 10/11]Replace all DMA_24BIT_MASK macro with DMA_BIT_MASK(24) Yang Hongyang
2009-02-19 9:53 ` [PATCHv2 11/11]Update the old macro DMA_nBIT_MASK related documentations Yang Hongyang
2009-02-19 12:47 ` [PATCHv2 00/11]Get rid of all the old macro DMA_nBIT_MASK and use DMA_BIT_MASK(n) instead Stefan Richter
2009-02-19 15:08 ` Ingo Molnar
2009-02-19 23:14 ` Andrew Morton
2009-02-20 10:29 ` Ingo Molnar
2009-02-19 6:55 ` [PATCH 12/12]Update related documentations Yang Hongyang
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=499D0109.5070502@cn.fujitsu.com \
--to=yanghy@cn.fujitsu.com \
--cc=akpm@linux-foundation.org \
--cc=davem@davemloft.net \
--cc=linux-kernel@vger.kernel.org \
--cc=netdev@vger.kernel.org \
--cc=petkovbb@googlemail.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.