From: Yang Hongyang <yanghy@cn.fujitsu.com>
To: Andrew Morton <akpm@linux-foundation.org>,
"David S. Miller" <davem@davemloft.net>
Cc: linux-kernel@vger.kernel.org, netdev@vger.kernel.org,
Borislav Petkov <petkovbb@googlemail.com>
Subject: [PATCH 09/12]Replace all DMA_28BIT_MASK micro with DMA_BIT_MASK(28)
Date: Thu, 19 Feb 2009 14:51:06 +0800 [thread overview]
Message-ID: <499D015A.5070807@cn.fujitsu.com> (raw)
In-Reply-To: <499CFDC8.1070600@cn.fujitsu.com>
Replace all DMA_28BIT_MASK micro with DMA_BIT_MASK(28)
Signed-off-by: Yang Hongyang<yanghy@cn.fujitsu.com>
---
drivers/net/wan/wanxl.c | 4 ++--
sound/pci/als300.c | 4 ++--
sound/pci/emu10k1/emu10k1x.c | 4 ++--
sound/pci/es1968.c | 4 ++--
sound/pci/ice1712/ice1712.c | 4 ++--
sound/pci/maestro3.c | 4 ++--
6 files changed, 12 insertions(+), 12 deletions(-)
diff --git a/drivers/net/wan/wanxl.c b/drivers/net/wan/wanxl.c
index f1cef90..c94edaa 100644
--- a/drivers/net/wan/wanxl.c
+++ b/drivers/net/wan/wanxl.c
@@ -577,8 +577,8 @@ static int __devinit wanxl_pci_init_one(struct pci_dev *pdev,
We set both dma_mask and consistent_dma_mask to 28 bits
and pray pci_alloc_consistent() will use this info. It should
work on most platforms */
- if (pci_set_consistent_dma_mask(pdev, DMA_28BIT_MASK) ||
- pci_set_dma_mask(pdev, DMA_28BIT_MASK)) {
+ if (pci_set_consistent_dma_mask(pdev, DMA_BIT_MASK(28)) ||
+ pci_set_dma_mask(pdev, DMA_BIT_MASK(28))) {
printk(KERN_ERR "wanXL: No usable DMA configuration\n");
return -EIO;
}
diff --git a/sound/pci/als300.c b/sound/pci/als300.c
index 8df6824..88bef04 100644
--- a/sound/pci/als300.c
+++ b/sound/pci/als300.c
@@ -689,8 +689,8 @@ static int __devinit snd_als300_create(struct snd_card *card,
if ((err = pci_enable_device(pci)) < 0)
return err;
- if (pci_set_dma_mask(pci, DMA_28BIT_MASK) < 0 ||
- pci_set_consistent_dma_mask(pci, DMA_28BIT_MASK) < 0) {
+ if (pci_set_dma_mask(pci, DMA_BIT_MASK(28)) < 0 ||
+ pci_set_consistent_dma_mask(pci, DMA_BIT_MASK(28)) < 0) {
printk(KERN_ERR "error setting 28bit DMA mask\n");
pci_disable_device(pci);
return -ENXIO;
diff --git a/sound/pci/emu10k1/emu10k1x.c b/sound/pci/emu10k1/emu10k1x.c
index 5ff4dbb..d1422e0 100644
--- a/sound/pci/emu10k1/emu10k1x.c
+++ b/sound/pci/emu10k1/emu10k1x.c
@@ -897,8 +897,8 @@ static int __devinit snd_emu10k1x_create(struct snd_card *card,
if ((err = pci_enable_device(pci)) < 0)
return err;
- if (pci_set_dma_mask(pci, DMA_28BIT_MASK) < 0 ||
- pci_set_consistent_dma_mask(pci, DMA_28BIT_MASK) < 0) {
+ if (pci_set_dma_mask(pci, DMA_BIT_MASK(28)) < 0 ||
+ pci_set_consistent_dma_mask(pci, DMA_BIT_MASK(28)) < 0) {
snd_printk(KERN_ERR "error to set 28bit mask DMA\n");
pci_disable_device(pci);
return -ENXIO;
diff --git a/sound/pci/es1968.c b/sound/pci/es1968.c
index e9c3794..f4e124d 100644
--- a/sound/pci/es1968.c
+++ b/sound/pci/es1968.c
@@ -2539,8 +2539,8 @@ static int __devinit snd_es1968_create(struct snd_card *card,
if ((err = pci_enable_device(pci)) < 0)
return err;
/* check, if we can restrict PCI DMA transfers to 28 bits */
- if (pci_set_dma_mask(pci, DMA_28BIT_MASK) < 0 ||
- pci_set_consistent_dma_mask(pci, DMA_28BIT_MASK) < 0) {
+ if (pci_set_dma_mask(pci, DMA_BIT_MASK(28)) < 0 ||
+ pci_set_consistent_dma_mask(pci, DMA_BIT_MASK(28)) < 0) {
snd_printk(KERN_ERR "architecture does not support 28bit PCI busmaster DMA\n");
pci_disable_device(pci);
return -ENXIO;
diff --git a/sound/pci/ice1712/ice1712.c b/sound/pci/ice1712/ice1712.c
index 58d7cda..155c41e 100644
--- a/sound/pci/ice1712/ice1712.c
+++ b/sound/pci/ice1712/ice1712.c
@@ -2533,8 +2533,8 @@ static int __devinit snd_ice1712_create(struct snd_card *card,
if (err < 0)
return err;
/* check, if we can restrict PCI DMA transfers to 28 bits */
- if (pci_set_dma_mask(pci, DMA_28BIT_MASK) < 0 ||
- pci_set_consistent_dma_mask(pci, DMA_28BIT_MASK) < 0) {
+ if (pci_set_dma_mask(pci, DMA_BIT_MASK(28)) < 0 ||
+ pci_set_consistent_dma_mask(pci, DMA_BIT_MASK(28)) < 0) {
snd_printk(KERN_ERR "architecture does not support 28bit PCI busmaster DMA\n");
pci_disable_device(pci);
return -ENXIO;
diff --git a/sound/pci/maestro3.c b/sound/pci/maestro3.c
index 59bbaf8..a3e9f6c 100644
--- a/sound/pci/maestro3.c
+++ b/sound/pci/maestro3.c
@@ -2530,8 +2530,8 @@ snd_m3_create(struct snd_card *card, struct pci_dev *pci,
return -EIO;
/* check, if we can restrict PCI DMA transfers to 28 bits */
- if (pci_set_dma_mask(pci, DMA_28BIT_MASK) < 0 ||
- pci_set_consistent_dma_mask(pci, DMA_28BIT_MASK) < 0) {
+ if (pci_set_dma_mask(pci, DMA_BIT_MASK(28)) < 0 ||
+ pci_set_consistent_dma_mask(pci, DMA_BIT_MASK(28)) < 0) {
snd_printk(KERN_ERR "architecture does not support 28bit PCI busmaster DMA\n");
pci_disable_device(pci);
return -ENXIO;
--
1.6.0.3
--
Regards
Yang Hongyang
next prev parent reply other threads:[~2009-02-19 6:51 UTC|newest]
Thread overview: 34+ messages / expand[flat|nested] mbox.gz Atom feed top
2009-02-19 6:35 [PATCH 00/12]Next:Get rid of all the old micro DMA_XXBIT_MASK and use DMA_BIT_MASK(n) instead Yang Hongyang
2009-02-19 6:38 ` [PATCH 01/12]Replace all DMA_64BIT_MASK micro with DMA_BIT_MASK(64) Yang Hongyang
2009-02-19 6:40 ` [PATCH 02/12]Replace all DMA_48BIT_MASK micro with DMA_BIT_MASK(48) Yang Hongyang
2009-02-19 6:41 ` [PATCH 03/12]Replace all DMA_40BIT_MASK micro with DMA_BIT_MASK(40) Yang Hongyang
2009-02-19 6:44 ` [PATCH 04/12]Replace all DMA_39BIT_MASK micro with DMA_BIT_MASK(39) Yang Hongyang
2009-02-19 6:45 ` [PATCH 05/12]Replace all DMA_35BIT_MASK micro with DMA_BIT_MASK(35) Yang Hongyang
2009-02-19 6:46 ` [PATCH 06/12]Replace all DMA_32BIT_MASK micro with DMA_BIT_MASK(32) Yang Hongyang
2009-02-19 6:48 ` [PATCH 07/12]Replace all DMA_31BIT_MASK micro with DMA_BIT_MASK(31) Yang Hongyang
2009-02-19 6:49 ` [PATCH 00/12]Next:Get rid of all the old micro DMA_XXBIT_MASK and use DMA_BIT_MASK(n) instead Américo Wang
2009-02-19 8:52 ` Yang Hongyang
2009-02-19 6:49 ` [PATCH 08/12]Replace all DMA_30BIT_MASK micro with DMA_BIT_MASK(30) Yang Hongyang
2009-02-19 6:51 ` Yang Hongyang [this message]
2009-02-19 6:53 ` [PATCH 10/12]Replace all DMA_24BIT_MASK micro with DMA_BIT_MASK(24) Yang Hongyang
2009-02-19 6:54 ` [PATCH 11/12]Remove defines of DMA_XXBIT_MASK micro Yang Hongyang
2009-02-19 8:14 ` Ingo Molnar
2009-02-19 8:56 ` Yang Hongyang
2009-02-19 9:32 ` [PATCHv2 00/11]Get rid of all the old macro DMA_nBIT_MASK and use DMA_BIT_MASK(n) instead Yang Hongyang
2009-02-19 9:36 ` [PATCHv2 01/11]Replace all DMA_64BIT_MASK macro with DMA_BIT_MASK(64) Yang Hongyang
2009-02-19 9:38 ` [PATCHv2 02/11]Replace all DMA_48BIT_MASK macro with DMA_BIT_MASK(48) Yang Hongyang
2009-02-19 9:40 ` [PATCHv2 03/11]Replace all DMA_40BIT_MASK macro with DMA_BIT_MASK(40) Yang Hongyang
2009-02-19 9:42 ` [PATCHv2 04/11]Replace all DMA_39BIT_MASK macro with DMA_BIT_MASK(39) Yang Hongyang
2009-02-19 9:43 ` [PATCHv2 05/11]Replace all DMA_35BIT_MASK macro with DMA_BIT_MASK(35) Yang Hongyang
2009-02-19 9:45 ` [PATCHv2 06/11]Replace all DMA_32BIT_MASK macro with DMA_BIT_MASK(32) Yang Hongyang
2009-02-19 12:50 ` Stefan Richter
2009-02-19 9:47 ` [PATCHv2 07/11]Replace all DMA_31BIT_MASK macro with DMA_BIT_MASK(31) Yang Hongyang
2009-02-19 9:48 ` [PATCHv2 08/11]Replace all DMA_30BIT_MASK macro with DMA_BIT_MASK(30) Yang Hongyang
2009-02-19 9:50 ` [PATCHv2 09/11]Replace all DMA_28BIT_MASK macro with DMA_BIT_MASK(28) Yang Hongyang
2009-02-19 9:51 ` [PATCHv2 10/11]Replace all DMA_24BIT_MASK macro with DMA_BIT_MASK(24) Yang Hongyang
2009-02-19 9:53 ` [PATCHv2 11/11]Update the old macro DMA_nBIT_MASK related documentations Yang Hongyang
2009-02-19 12:47 ` [PATCHv2 00/11]Get rid of all the old macro DMA_nBIT_MASK and use DMA_BIT_MASK(n) instead Stefan Richter
2009-02-19 15:08 ` Ingo Molnar
2009-02-19 23:14 ` Andrew Morton
2009-02-20 10:29 ` Ingo Molnar
2009-02-19 6:55 ` [PATCH 12/12]Update related documentations Yang Hongyang
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=499D015A.5070807@cn.fujitsu.com \
--to=yanghy@cn.fujitsu.com \
--cc=akpm@linux-foundation.org \
--cc=davem@davemloft.net \
--cc=linux-kernel@vger.kernel.org \
--cc=netdev@vger.kernel.org \
--cc=petkovbb@googlemail.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.