* [U-Boot] PATCH Beagleboard add OTG host support
[not found] <1235062302.6974.4.camel@xandros.ottawa.xandros.ca>
@ 2009-02-19 16:58 ` yanfeng qin
2009-02-19 17:30 ` Nishanth Menon
0 siblings, 1 reply; 2+ messages in thread
From: yanfeng qin @ 2009-02-19 16:58 UTC (permalink / raw)
To: u-boot
Hi guys,
This patch is added OTG host support for beagleboard. My team modifiedand
tested this patch.We hope it would help.
Best Regards,
connieqin1975 at gmail.com
garylu312 at gmail.com
wsf064 at yahoo.com
subject: [RFC][PATCH] U-Boot: Adding usb(otg) host support patch
From: yanfeng qin <connieqin1975@gmail.com>
This patch is adding usb(otg) host support for beagleboard.
Signed-off-by: yanfeng qin <connieqin1975@gmail.com>
Signed-off-by: garylu312 <garylu312@gmail.com>
Signed-off-by: shaofeng wang <wsf064@gmail.com>
---
Patch against omap3-dev-usb
drivers/usb/Makefile | 12 +++---------
include/configs/omap3_beagle.h | 9 +++++----
include/usb.h | 6 +-----
3 files changed, 9 insertions(+), 18 deletions(-)
Index: u-boot-steve-omap3/drivers/usb/Makefile
===================================================================
--- u-boot-steve-omap3.orig/drivers/usb/Makefile
+++ u-boot-steve-omap3/drivers/usb/Makefile
@@ -31,17 +31,11 @@ COBJS-$(CONFIG_USB_OHCI_NEW) += usb_ohci
COBJS-$(CONFIG_USB_EHCI) += usb_ehci_core.o
# host
-COBJS-$(CONFIG_USB_ISP116X_HCD) += isp116x-hcd.o
-COBJS-$(CONFIG_USB_R8A66597_HCD) += r8a66597-hcd.o
-COBJS-$(CONFIG_USB_SL811HS) += sl811_usb.o
-COBJS-$(CONFIG_USB_EHCI_FSL) += usb_ehci_fsl.o
-COBJS-$(CONFIG_USB_EHCI_PCI) += usb_ehci_pci.o
-COBJS-$(CONFIG_USB_EHCI_IXP4XX) += usb_ehci_ixp.o
+ifdef CONFIG_USB_HOST
COBJS-$(CONFIG_MUSB_HCD) += musb_hcd.o musb_core.o
-COBJS-$(CONFIG_USB_DAVINCI) += davinci_usb.o
-COBJS-$(CONFIG_USB_EHCI_VCT) += usb_ehci_vct.o
COBJS-$(CONFIG_USB_OMAP3530) += omap3530_usb.o
-
+COBJS-$(CONFIG_TWL4030_USB) += twl4030_usb.o
+endif
# device
ifdef CONFIG_USB_DEVICE
COBJS-y += usbdcore_ep0.o
Index: u-boot-steve-omap3/include/configs/omap3_beagle.h
===================================================================
--- u-boot-steve-omap3.orig/include/configs/omap3_beagle.h
+++ u-boot-steve-omap3/include/configs/omap3_beagle.h
@@ -103,11 +103,12 @@
/*
* USB Configuration
*/
-#define CONFIG_USB_DEVICE 1
-#define CONFIG_USB_TTY 1
-#define CONFIG_MUSB 1 /* Enable USB driver*/
+#define CONFIG_MUSB_HCD 1 /* Enable USB driver*/
#define CONFIG_TWL4030_USB 1 /* Enable TWL4030 USB */
-
+#define CONFIG_USB_STORAGE
+#define CONFIG_USB_OMAP3530
+#define CONFIG_USB_HOST
+#define CONFIG_CMD_USB
/* Allow console in serial and USB at the same time */
#define CONFIG_CONSOLE_MUX 1
#define CONFIG_SYS_CONSOLE_IS_IN_ENV 1
Index: u-boot-steve-omap3/include/usb.h
===================================================================
--- u-boot-steve-omap3.orig/include/usb.h
+++ u-boot-steve-omap3/include/usb.h
@@ -180,11 +180,7 @@ struct usb_device {
* this is how the lowlevel part communicate with the outer world
*/
-#if defined(CONFIG_USB_UHCI) || defined(CONFIG_USB_OHCI) || \
- defined(CONFIG_USB_EHCI) || defined(CONFIG_USB_OHCI_NEW) || \
- defined(CONFIG_USB_SL811HS) || defined(CONFIG_USB_ISP116X_HCD)
|| \
- defined(CONFIG_USB_R8A66597_HCD) || defined(CONFIG_USB_DAVINCI)
|| \
- defined(CONFIG_USB_OMAP3530)
+#if defined(CONFIG_MUSB_HCD)
int usb_lowlevel_init(void);
int usb_lowlevel_stop(void);
^ permalink raw reply [flat|nested] 2+ messages in thread