[Xenomai-help] xenomai on atom

[Xenomai-help] xenomai on atom

[Steven Seeger]

[-- Attachment #1: Type: text/plain, Size: 97 bytes --]

Would there be any issue running Xenomai on an atom processor?

 

Thanks,

Steven

 


[-- Attachment #2: Type: text/html, Size: 4405 bytes --]

Re: [Xenomai-help] xenomai on atom

[Philippe Gerum]

Steven Seeger wrote:
> Would there be any issue running Xenomai on an atom processor?
> 

atom login: root
# dmesg

<snip>

Detected 1596.202 MHz processor.
I-pipe 2.2-06: pipeline enabled.
Console: colour VGA+ 80x25
console [ttyS0] enabled
Dentry cache hash table entries: 262144 (order: 9, 2097152 bytes)
Inode-cache hash table entries: 131072 (order: 8, 1048576 bytes)
Checking aperture...
No AGP bridge found
Memory: 2047812k/2087936k available (3426k kernel code, 1128k absent, 38372k
reserved, 1269k data, 364k init)
hpet clockevent registered
HPET: 3 timers in total, 0 timers will be used for per-cpu timer
Calibrating delay loop (skipped), value calculated using timer frequency..
3192.40 BogoMIPS (lpj=6384808)
Mount-cache hash table entries: 256
Initializing cgroup subsys ns
Initializing cgroup subsys cpuacct
CPU: L1 I cache: 32K, L1 D cache: 24K
CPU: L2 cache: 512K
CPU: Physical Processor ID: 0
CPU: Processor Core ID: 0
ACPI: Core revision 20080926
Setting APIC routing to flat
..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
CPU0: Intel(R) Atom(TM) CPU  230   @ 1.60GHz stepping 02
Booting processor 1 APIC 0x1 ip 0x6000
Initializing CPU#1
Calibrating delay using timer specific routine.. 3192.15 BogoMIPS (lpj=6384309)
CPU: L1 I cache: 32K, L1 D cache: 24K
CPU: L2 cache: 512K
CPU: Physical Processor ID: 0
CPU: Processor Core ID: 0
x86 PAT enabled: cpu 1, old 0x7040600070406, new 0x7010600070106
CPU1: Intel(R) Atom(TM) CPU  230   @ 1.60GHz stepping 02
checking TSC synchronization [CPU#0 -> CPU#1]: passed.
Brought up 2 CPUs
Total of 2 processors activated (6384.55 BogoMIPS).

<snip>

NET: Registered protocol family 2
IP route cache hash table entries: 65536 (order: 7, 524288 bytes)
TCP established hash table entries: 262144 (order: 10, 4194304 bytes)
TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
TCP: Hash tables configured (established 262144 bind 65536)
TCP reno registered
NET: Registered protocol family 1
I-pipe: Domain Xenomai registered.
Xenomai: hal/x86_64 started.
Xenomai: real-time nucleus v2.4.6 (Bamboo) loaded.


>  
> 
> Thanks,
> 
> Steven
> 
>  
> 
> 
> ------------------------------------------------------------------------
> 
> _______________________________________________
> Xenomai-help mailing list
> Xenomai-help@domain.hid
> https://mail.gna.org/listinfo/xenomai-help


-- 
Philippe.

Re: [Xenomai-help] xenomai on atom

[Steven Seeger]

Philippe, 

Next time I ask such a question I'll be sure to specify --verbose=0 :)

Thanks,
Steven

> -----Original Message-----
> From: Philippe Gerum [mailto:rpm@xenomai.org]
> Sent: Sunday, February 22, 2009 3:32 PM
> To: Steven Seeger
> Cc: xenomai@xenomai.org
> Subject: Re: [Xenomai-help] xenomai on atom
> 
> Steven Seeger wrote:
> > Would there be any issue running Xenomai on an atom processor?
> >
> 
> atom login: root
> # dmesg
> 
> <snip>
> 
> Detected 1596.202 MHz processor.
> I-pipe 2.2-06: pipeline enabled.
> Console: colour VGA+ 80x25
> console [ttyS0] enabled
> Dentry cache hash table entries: 262144 (order: 9, 2097152 bytes)
> Inode-cache hash table entries: 131072 (order: 8, 1048576 bytes)
> Checking aperture...
> No AGP bridge found
> Memory: 2047812k/2087936k available (3426k kernel code, 1128k absent,
> 38372k
> reserved, 1269k data, 364k init)
> hpet clockevent registered
> HPET: 3 timers in total, 0 timers will be used for per-cpu timer
> Calibrating delay loop (skipped), value calculated using timer
> frequency..
> 3192.40 BogoMIPS (lpj=6384808)
> Mount-cache hash table entries: 256
> Initializing cgroup subsys ns
> Initializing cgroup subsys cpuacct
> CPU: L1 I cache: 32K, L1 D cache: 24K
> CPU: L2 cache: 512K
> CPU: Physical Processor ID: 0
> CPU: Processor Core ID: 0
> ACPI: Core revision 20080926
> Setting APIC routing to flat
> ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
> CPU0: Intel(R) Atom(TM) CPU  230   @ 1.60GHz stepping 02
> Booting processor 1 APIC 0x1 ip 0x6000
> Initializing CPU#1
> Calibrating delay using timer specific routine.. 3192.15 BogoMIPS
> (lpj=6384309)
> CPU: L1 I cache: 32K, L1 D cache: 24K
> CPU: L2 cache: 512K
> CPU: Physical Processor ID: 0
> CPU: Processor Core ID: 0
> x86 PAT enabled: cpu 1, old 0x7040600070406, new 0x7010600070106
> CPU1: Intel(R) Atom(TM) CPU  230   @ 1.60GHz stepping 02
> checking TSC synchronization [CPU#0 -> CPU#1]: passed.
> Brought up 2 CPUs
> Total of 2 processors activated (6384.55 BogoMIPS).
> 
> <snip>
> 
> NET: Registered protocol family 2
> IP route cache hash table entries: 65536 (order: 7, 524288 bytes)
> TCP established hash table entries: 262144 (order: 10, 4194304 bytes)
> TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
> TCP: Hash tables configured (established 262144 bind 65536)
> TCP reno registered
> NET: Registered protocol family 1
> I-pipe: Domain Xenomai registered.
> Xenomai: hal/x86_64 started.
> Xenomai: real-time nucleus v2.4.6 (Bamboo) loaded.
> 
> 
> >
> >
> > Thanks,
> >
> > Steven
> >
> >
> >
> >
> >
---------------------------------------------------------------------
> ---
> >
> > _______________________________________________
> > Xenomai-help mailing list
> > Xenomai-help@domain.hid
> > https://mail.gna.org/listinfo/xenomai-help
> 
> 
> --
> Philippe.