* [U-Boot] [PATCH 2/2] rtl8169: fix PCI system memory address
@ 2009-02-25 5:27 Yoshihiro Shimoda
0 siblings, 0 replies; only message in thread
From: Yoshihiro Shimoda @ 2009-02-25 5:27 UTC (permalink / raw)
To: u-boot
When PCI device use system memory, some PCI host controller should be
set physical memory address.
Signed-off-by: Yoshihiro Shimoda <shimoda.yoshihiro@renesas.com>
---
drivers/net/rtl8169.c | 13 ++++++++-----
1 files changed, 8 insertions(+), 5 deletions(-)
diff --git a/drivers/net/rtl8169.c b/drivers/net/rtl8169.c
index b441ec4..4eee97f 100644
--- a/drivers/net/rtl8169.c
+++ b/drivers/net/rtl8169.c
@@ -110,6 +110,9 @@ static int media[MAX_UNITS] = { -1, -1, -1, -1, -1, -1, -1, -1 };
#define ETH_ALEN MAC_ADDR_LEN
#define ETH_ZLEN 60
+#define bus_to_phys(a) pci_mem_to_phys((pci_dev_t)dev->priv, (pci_addr_t)a)
+#define phys_to_bus(a) pci_phys_to_mem((pci_dev_t)dev->priv, (phys_addr_t)a)
+
enum RTL8169_registers {
MAC0 = 0, /* Ethernet hardware address. */
MAR0 = 8, /* Multicast filter. */
@@ -438,7 +441,7 @@ static int rtl_recv(struct eth_device *dev)
tpc->RxDescArray[cur_rx].status =
cpu_to_le32(OWNbit + RX_BUF_SIZE);
tpc->RxDescArray[cur_rx].buf_addr =
- cpu_to_le32((unsigned long)tpc->RxBufferRing[cur_rx]);
+ cpu_to_le32(bus_to_phys(tpc->RxBufferRing[cur_rx]));
flush_cache((unsigned long)tpc->RxBufferRing[cur_rx],
RX_BUF_SIZE);
} else {
@@ -488,7 +491,7 @@ static int rtl_send(struct eth_device *dev, volatile void *packet, int length)
ptxb[len++] = '\0';
tpc->TxDescArray[entry].buf_Haddr = 0;
- tpc->TxDescArray[entry].buf_addr = cpu_to_le32((unsigned long)ptxb);
+ tpc->TxDescArray[entry].buf_addr = cpu_to_le32(bus_to_phys(ptxb));
if (entry != (NUM_TX_DESC - 1)) {
tpc->TxDescArray[entry].status =
cpu_to_le32((OWNbit | FSbit | LSbit) |
@@ -593,9 +596,9 @@ static void rtl8169_hw_start(struct eth_device *dev)
tpc->cur_rx = 0;
- RTL_W32(TxDescStartAddrLow, (unsigned long)tpc->TxDescArray);
+ RTL_W32(TxDescStartAddrLow, bus_to_phys(tpc->TxDescArray));
RTL_W32(TxDescStartAddrHigh, (unsigned long)0);
- RTL_W32(RxDescStartAddrLow, (unsigned long)tpc->RxDescArray);
+ RTL_W32(RxDescStartAddrLow, bus_to_phys(tpc->RxDescArray));
RTL_W32(RxDescStartAddrHigh, (unsigned long)0);
/* RTL-8169sc/8110sc or later version */
@@ -646,7 +649,7 @@ static void rtl8169_init_ring(struct eth_device *dev)
tpc->RxBufferRing[i] = &rxb[i * RX_BUF_SIZE];
tpc->RxDescArray[i].buf_addr =
- cpu_to_le32((unsigned long)tpc->RxBufferRing[i]);
+ cpu_to_le32(bus_to_phys(tpc->RxBufferRing[i]));
flush_cache((unsigned long)tpc->RxBufferRing[i], RX_BUF_SIZE);
}
--
1.5.5
^ permalink raw reply related [flat|nested] only message in thread
only message in thread, other threads:[~2009-02-25 5:27 UTC | newest]
Thread overview: (only message) (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
2009-02-25 5:27 [U-Boot] [PATCH 2/2] rtl8169: fix PCI system memory address Yoshihiro Shimoda
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.