[ath9k-devel] AR9260 hang during connection to AP

[Steve Brown <sbrown@cortland.com>]

Sujith wrote:
> Steve Brown wrote:
>   
>> hostapd.conf
>> channel=6
>> ht_capab=[HT40-][SHORT-GI-40][DSSS_CCK-40]
>>
>> iw phy phy1 info
>> Wiphy phy1
>>         Band 1:
>>                 HT capabilities: 0x104e
>>                          * 20/40 MHz operation
>>                          * SM PS disabled
>>                          * 40 MHz short GI
>>                          * max A-MSDU len 3839
>>                          * DSSS/CCK 40 MHz
>>                 HT A-MPDU factor: 0x0003 (65535 bytes)
>>                 HT A-MPDU density: 0x0006 (8 usec)
>>                 HT MCS set: ff ff 00 00 00 00 00 00 00 00 00 00 01 00 00 00
>>
>>     
>
> Ah, are you using ath9k as the AP ?
>   
Yes, I'm using the same card for the ap. Also, I have no problem w/ g 
connections. I moved to channel 11.

hostapd is today's git.

ath9k still has printk's instead of the assert.
> Can you paste the hostapd log ? (hostapd -dd)
>   
attached.
> From your other mail, the chosen rate table is completely wrong,
> am not sure if this is related to AP mode in ath9k.
>
> Sujith
>   
Steve

-------------- next part --------------
An embedded and charset-unspecified text was scrubbed...
Name: ht.log
Url: http://lists.ath9k.org/pipermail/ath9k-devel/attachments/20090225/8837c2cc/attachment.txt