All of lore.kernel.org
 help / color / mirror / Atom feed
* pv_ops dom0 clock only runs under load
@ 2009-03-06  0:34 Milan Holzäpfel
  2009-03-06  5:41 ` Jeremy Fitzhardinge
  0 siblings, 1 reply; 6+ messages in thread
From: Milan Holzäpfel @ 2009-03-06  0:34 UTC (permalink / raw)
  To: xen-devel; +Cc: Milan Holzäpfel

[-- Attachment #1: Type: text/plain, Size: 36835 bytes --]

Hello, 

I'm trying to get a pv_ops dom0 to work on a Samsung X20 laptop
(Pentium M processor, Intel 915/ICH6 chipset).
The laptop hasn't got a serial port so I'm using netconsole to capture
dmesg and a initrd-based telnetd to log in.  (Text on VGA console
disappears as soon as Dom0 is started.)

I'm using Xen 3.3.1 and 2.6.29-rc7-tip from xen.git/xen/dom0/hackery
(commit b22698f3c4d6cbb6d38bc486da4ec61c5045895d should be included)

The clock only seems to run if the system is under load (e.g. run
"while true; do echo -n; done" in a shell).  
With the CPU loaded and the clock running everything seems to work
quite well (hard disk and network access, that is.)

Changing the "xen" clocksource to "tsc" via sysfs didn't make a
difference.  Enabling or disabling the "tickless" option doesn't make a
difference either. 

The system didn't boot up normally, I used a minimal busybox-based
initrd as test base instead. 

Here is dmesg and xm dmesg out.  .config is attached. 


dmesg:
(volumes where mounted using cryptsetup, and xend was started, see below)

Output is from netconsole, so some messages might have got lost.  I
piped the output through "sort". 
"dmesg" command output was incomplete (only about 15 K) despite a log
buffer size of 256 K so I send the netconsole output. 

[    0.000000] Built 1 zonelists in Zone order, mobility grouping on.  Total pages: 129806
[    0.000000] Detected 1729.018 MHz processor.
[    0.000000] Enabling fast FPU save and restore... done.
[    0.000000] Enabling unmasked SIMD FPU exception support... done.
[    0.000000] Initializing CPU#0
[    0.000000] Kernel command line: debug console=tty0 earlyprintk=vga netconsole=19000@10.32.1.43/eth0,19000@10.32.1.1/00:18:f3:59:d7:4f 
[    0.000000] NR_IRQS:512
[    0.000000] PID hash table entries: 2048 (order: 11, 8192 bytes)
[    0.000000] xen: --> irq=0
[    0.000000] xen: --> irq=1
[    0.000000] xen: --> irq=10
[    0.000000] xen: --> irq=11
[    0.000000] xen: --> irq=12
[    0.000000] xen: --> irq=13
[    0.000000] xen: --> irq=14
[    0.000000] xen: --> irq=15
[    0.000000] xen: --> irq=3
[    0.000000] xen: --> irq=4
[    0.000000] xen: --> irq=5
[    0.000000] xen: --> irq=6
[    0.000000] xen: --> irq=7
[    0.000000] xen: --> irq=8
[    0.000000] xen: --> irq=9
[    0.000000] xen: registering gsi 0 triggering 1 polarity 0
[    0.000000] xen: registering gsi 10 triggering 1 polarity 0
[    0.000000] xen: registering gsi 11 triggering 1 polarity 0
[    0.000000] xen: registering gsi 12 triggering 1 polarity 0
[    0.000000] xen: registering gsi 13 triggering 1 polarity 0
[    0.000000] xen: registering gsi 14 triggering 1 polarity 0
[    0.000000] xen: registering gsi 15 triggering 1 polarity 0
[    0.000000] xen: registering gsi 1 triggering 1 polarity 0
[    0.000000] xen: registering gsi 3 triggering 1 polarity 0
[    0.000000] xen: registering gsi 4 triggering 1 polarity 0
[    0.000000] xen: registering gsi 5 triggering 1 polarity 0
[    0.000000] xen: registering gsi 6 triggering 1 polarity 0
[    0.000000] xen: registering gsi 7 triggering 1 polarity 0
[    0.000000] xen: registering gsi 8 triggering 1 polarity 0
[    0.000000] xen: registering gsi 9 triggering 0 polarity 0
[    0.000000] xen_set_ioapic_routing: irq 0 gsi 0 vector 240 ioapic 0 pin 0 triggering 0 polarity 0
[    0.000000] xen_set_ioapic_routing: irq 10 gsi 10 vector 104 ioapic 0 pin 10 triggering 0 polarity 0
[    0.000000] xen_set_ioapic_routing: irq 11 gsi 11 vector 112 ioapic 0 pin 11 triggering 0 polarity 0
[    0.000000] xen_set_ioapic_routing: irq 12 gsi 12 vector 120 ioapic 0 pin 12 triggering 0 polarity 0
[    0.000000] xen_set_ioapic_routing: irq 13 gsi 13 vector 136 ioapic 0 pin 13 triggering 0 polarity 0
[    0.000000] xen_set_ioapic_routing: irq 14 gsi 14 vector 144 ioapic 0 pin 14 triggering 0 polarity 0
[    0.000000] xen_set_ioapic_routing: irq 15 gsi 15 vector 152 ioapic 0 pin 15 triggering 0 polarity 0
[    0.000000] xen_set_ioapic_routing: irq 1 gsi 1 vector 40 ioapic 0 pin 1 triggering 0 polarity 0
[    0.000000] xen_set_ioapic_routing: irq 3 gsi 3 vector 48 ioapic 0 pin 3 triggering 0 polarity 0
[    0.000000] xen_set_ioapic_routing: irq 4 gsi 4 vector 56 ioapic 0 pin 4 triggering 0 polarity 0
[    0.000000] xen_set_ioapic_routing: irq 5 gsi 5 vector 64 ioapic 0 pin 5 triggering 0 polarity 0
[    0.000000] xen_set_ioapic_routing: irq 6 gsi 6 vector 72 ioapic 0 pin 6 triggering 0 polarity 0
[    0.000000] xen_set_ioapic_routing: irq 7 gsi 7 vector 80 ioapic 0 pin 7 triggering 0 polarity 0
[    0.000000] xen_set_ioapic_routing: irq 8 gsi 8 vector 88 ioapic 0 pin 8 triggering 0 polarity 0
[    0.000000] xen_set_ioapic_routing: irq 9 gsi 9 vector 96 ioapic 0 pin 9 triggering 1 polarity 0
[    0.010000] Calibrating delay loop (skipped), value calculated using timer frequency.. 3458.03 BogoMIPS (lpj=17290180)
[    0.010000] Checking if this processor honours the WP bit even in supervisor mode...Ok.
[    0.010000] Console: colour VGA+ 80x25
[    0.010000] console handover: boot [earlyvga0] -> real [tty0]
[    0.010000] CPU: L1 I cache: 32K, L1 D cache: 32K
[    0.010000] CPU: L2 cache: 2048K
[    0.010000]       .data : 0xc038dd6b - 0xc0493cd0   (1047 kB)
[    0.010000] Dentry cache hash table entries: 65536 (order: 6, 262144 bytes)
[    0.010000]     fixmap  : 0xf5750000 - 0xf57ff000   ( 700 kB)
[    0.010000]       .init : 0xc0499000 - 0xc04e7000   ( 312 kB)
[    0.010000] Initializing HighMem for node 0 (00000000:00000000)
[    0.010000] Inode-cache hash table entries: 32768 (order: 5, 131072 bytes)
[    0.010000] installing Xen timer for CPU 0
[    0.010000]     lowmem  : 0xc0000000 - 0xe0000000   ( 512 MB)
[    0.010000] Memory: 443424k/524288k available (2615k kernel code, 79736k reserved, 1047k data, 312k init, 0k highmem)
[    0.010000] Mount-cache hash table entries: 512
[    0.010000] PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
[    0.010000]     pkmap   : 0xf5200000 - 0xf5400000   (2048 kB)
[    0.010000] Placing 64MB software IO TLB between c1470000 - c5470000
[    0.010000] SMP alternatives: switching to UP code
[    0.010000] software IO TLB at phys 0x1470000 - 0x5470000
[    0.010000]       .text : 0xc0100000 - 0xc038dd6b   (2615 kB)
[    0.010000] virtual kernel memory layout:
[    0.010000]     vmalloc : 0xe0800000 - 0xf51fe000   ( 329 MB)
[    0.010000] xen_swiotlb_fixup: buf=c1470000 size=67108864
[    0.010000] xen_swiotlb_fixup: buf=c54d0000 size=32768
[    0.010000] Xen: using vcpuop timer interface
[    0.042238] Freeing SMP alternatives: 11k freed
[    0.042285] ACPI: Core revision 20081204
[    0.060086] cpu 0 spinlock event irq 25
[    0.060270] Brought up 1 CPUs
[    0.060317] CPU0 attaching NULL sched-domain.
[    0.060882] net_namespace: 304 bytes
[    0.060936] Booting paravirtualized kernel on Xen
[    0.060976] Xen version: 3.3.1 (preserve-AD) (dom0)
[    0.061110] Grant table initialized
[    0.061200] NET: Registered protocol family 16
[    0.061532] xenbus_probe_init ok
[    0.061861] PCI: MCFG configuration 0: base e0000000 segment 0 buses 0 - 255
[    0.061906] PCI: MCFG area at e0000000 reserved in E820
[    0.061946] PCI: Using MMCONFIG for extended config space
[    0.061987] PCI: Using configuration type 1 for base access
[    0.062030] Samsung X20 Laptop detected: enabling PCI bus# renumbering (pci=assign-busses)
[    0.065889] bio: create slab <bio-0> at 0
[    0.068976] ACPI: EC: Look up EC in DSDT
[    0.078455] ACPI: EC: non-query interrupt received, switching to interrupt mode
[    0.079272] ACPI: Interpreter enabled
[    0.079313] ACPI: (supports S0 S5)
[    0.079429] ACPI: Using IOAPIC for interrupt routing
[    0.094170] ACPI: EC: GPE = 0x17, I/O: command/status = 0x66, data = 0x62
[    0.094212] ACPI: EC: driver started in interrupt mode
[    0.095291] ACPI: ACPI Dock Station Driver: 1 docks/bays found
[    0.095358] ACPI: PCI Root Bridge [PCI0] (0000:00)
[    0.095674] pci 0000:00:02.0: reg 10 32bit mmio: [0xb0080000-0xb00fffff]
[    0.095726] pci 0000:00:02.0: reg 14 io port: [0x1800-0x1807]
[    0.095777] pci 0000:00:02.0: reg 18 32bit mmio: [0xc0000000-0xcfffffff]
[    0.095830] pci 0000:00:02.0: reg 1c 32bit mmio: [0xb0000000-0xb003ffff]
[    0.095978] pci 0000:00:02.1: reg 10 32bit mmio: [0x000000-0x07ffff]
[    0.096343] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
[    0.096391] pci 0000:00:1c.0: PME# disabled
[    0.096562] pci 0000:00:1d.0: reg 20 io port: [0x1820-0x183f]
[    0.096729] pci 0000:00:1d.1: reg 20 io port: [0x1840-0x185f]
[    0.096896] pci 0000:00:1d.2: reg 20 io port: [0x1860-0x187f]
[    0.097060] pci 0000:00:1d.3: reg 20 io port: [0x1880-0x189f]
[    0.097231] pci 0000:00:1d.7: reg 10 32bit mmio: [0xb0040000-0xb00403ff]
[    0.097398] pci 0000:00:1d.7: PME# supported from D0 D3hot D3cold
[    0.097444] pci 0000:00:1d.7: PME# disabled
[    0.097696] pci 0000:00:1e.2: reg 10 io port: [0x1c00-0x1cff]
[    0.097748] pci 0000:00:1e.2: reg 14 io port: [0x18c0-0x18ff]
[    0.097802] pci 0000:00:1e.2: reg 18 32bit mmio: [0xb0040800-0xb00409ff]
[    0.097856] pci 0000:00:1e.2: reg 1c 32bit mmio: [0xb0040400-0xb00404ff]
[    0.097974] pci 0000:00:1e.2: PME# supported from D0 D3hot D3cold
[    0.098022] pci 0000:00:1e.2: PME# disabled
[    0.098136] pci 0000:00:1e.3: reg 10 io port: [0x2400-0x24ff]
[    0.098190] pci 0000:00:1e.3: reg 14 io port: [0x2000-0x207f]
[    0.098329] pci 0000:00:1e.3: PME# supported from D0 D3hot D3cold
[    0.098377] pci 0000:00:1e.3: PME# disabled
[    0.098571] pci 0000:00:1f.0: quirk: region 1000-107f claimed by ICH6 ACPI/GPIO/TCO
[    0.098621] pci 0000:00:1f.0: quirk: region 1180-11bf claimed by ICH6 GPIO
[    0.098668] pci 0000:00:1f.0: LPC Generic IO decode 1 PIO at 0680-06ff
[    0.098807] pci 0000:00:1f.1: reg 10 io port: [0x00-0x07]
[    0.098915] pci 0000:00:1f.1: reg 18 io port: [0x00-0x07]
[    0.098968] pci 0000:00:1f.1: reg 1c io port: [0x00-0x03]
[    0.101605] pci_bus 0000:00: on NUMA node 0
[    0.101654] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
[    0.102216] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP01._PRT]
[    0.102474] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCIB._PRT]
[    0.121374] ACPI: PCI Interrupt Link [LNKA] (IRQs *11)
[    0.121708] ACPI: PCI Interrupt Link [LNKB] (IRQs *10)
[    0.122037] ACPI: PCI Interrupt Link [LNKC] (IRQs *5)
[    0.122366] ACPI: PCI Interrupt Link [LNKD] (IRQs *5)
[    0.122697] ACPI: PCI Interrupt Link [LNKE] (IRQs *11)
[    0.123027] ACPI: PCI Interrupt Link [LNKF] (IRQs 10) *0, disabled.
[    0.123424] ACPI: PCI Interrupt Link [LNKG] (IRQs *5)
[    0.123752] ACPI: PCI Interrupt Link [LNKH] (IRQs *5)
[    0.124114] ACPI: Power Resource [CFAN] (on)
[    0.124549] xenbus_probe_backend_init bus registered ok
[    0.124591] xen_balloon: Initialising balloon driver.
[    0.125144] SCSI subsystem initialized
[    0.125257] libata version 3.00 loaded.
[    0.125646] PCI: Using ACPI for IRQ routing
[    0.125768] pci 0000:02:09.0: BAR 0: can't allocate resource
[    0.126134] Xen: Initializing Xen DMA ops
[    0.126175] Xen: Enabling DMA fallback to swiotlb
[    0.126257] pnp: PnP ACPI init
[    0.126306] ACPI: bus type pnp registered
[    0.129938] xen: registering gsi 8 triggering 1 polarity 0
[    0.132564] system 00:06: ioport range 0x1180-0x11bf has been reserved
[    0.132608] system 00:06: ioport range 0x1640-0x164f has been reserved
[    0.168092] pci 0000:00:1c.0: PCI bridge, secondary bus 0000:01
[    0.168138] pci 0000:00:1c.0:   IO window: 0x3000-0x3fff
[    0.168189] pci 0000:00:1c.0:   MEM window: 0xb4000000-0xb7ffffff
[    0.168238] pci 0000:00:1c.0:   PREFETCH window: 0x000000d0000000-0x000000d3ffffff
[    0.168312] pci 0000:02:09.0: CardBus bridge, secondary bus 0000:03
[    0.168353] pci 0000:02:09.0:   IO window: 0x004000-0x0040ff
[    0.168399] pci 0000:02:09.0:   IO window: 0x004400-0x0044ff
[    0.168447] pci 0000:02:09.0:   PREFETCH window: 0x50000000-0x53ffffff
[    0.168494] pci 0000:02:09.0:   MEM window: 0x58000000-0x5bffffff
[    0.168541] pci 0000:00:1e.0: PCI bridge, secondary bus 0000:02
[    0.168584] pci 0000:00:1e.0:   IO window: 0x4000-0x4fff
[    0.168636] pci 0000:00:1e.0:   MEM window: 0xb8000000-0xb80fffff
[    0.168684] pci 0000:00:1e.0:   PREFETCH window: 0x00000050000000-0x00000055ffffff
[    0.168755] xen: registering gsi 17 triggering 0 polarity 1
[    0.168803] xen: --> irq=17
[    0.168843] xen_set_ioapic_routing: irq 17 gsi 17 vector 160 ioapic 0 pin 17 triggering 1 polarity 1
[    0.168893] pci 0000:00:1c.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
[    0.168942] pci 0000:00:1c.0: setting latency timer to 64
[    0.169117] pci 0000:02:09.0: power state changed by ACPI to D0
[    0.169355] pci_bus 0000:00: resource 0 io:  [0x00-0xffff]
[    0.169396] pci_bus 0000:00: resource 1 mem: [0x000000-0xffffffffffffffff]
[    0.169479] pci_bus 0000:01: resource 1 mem: [0xb4000000-0xb7ffffff]
[    0.169521] pci_bus 0000:01: resource 2 mem: [0xd0000000-0xd3ffffff]
[    0.169562] pci_bus 0000:01: resource 3 mem: [0x0-0x0]
[    0.169602] pci_bus 0000:02: resource 0 io:  [0x4000-0x4fff]
[    0.169643] pci_bus 0000:02: resource 1 mem: [0xb8000000-0xb80fffff]
[    0.169684] pci_bus 0000:02: resource 2 mem: [0x50000000-0x55ffffff]
[    0.169765] pci_bus 0000:02: resource 4 mem: [0x000000-0xffffffffffffffff]
[    0.169807] pci_bus 0000:03: resource 0 io:  [0x4000-0x40ff]
[    0.169847] pci_bus 0000:03: resource 1 io:  [0x4400-0x44ff]
[    0.169888] pci_bus 0000:03: resource 2 mem: [0x50000000-0x53ffffff]
[    0.169929] pci_bus 0000:03: resource 3 mem: [0x58000000-0x5bffffff]
[    0.170011] NET: Registered protocol family 2
[    0.170094] IP route cache hash table entries: 16384 (order: 4, 65536 bytes)
[    0.170230] TCP established hash table entries: 65536 (order: 7, 524288 bytes)
[    0.170657] TCP bind hash table entries: 65536 (order: 7, 524288 bytes)
[    0.171096] TCP: Hash tables configured (established 65536 bind 65536)
[    0.171141] TCP reno registered
[    0.171273] NET: Registered protocol family 1
[    0.171390] checking if image is initramfs... it is
[    0.178749] Freeing initrd memory: 3736k freed
[    0.182790] Simple Boot Flag at 0x36 set to 0x1
[    0.184236] VFS: Disk quotas dquot_6.5.2
[    0.184303] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
[    0.184427] Created ptmx node in devpts ino 2
[    0.184525] msgmni has been set to 1031
[    0.185111] alg: No test for stdrng (krng)
[    0.185202] alg: No test for stdrng (ansi_cprng)
[    0.185264] io scheduler noop registered
[    0.185326] io scheduler cfq registered (default)
[    0.185824] pcieport-driver 0000:00:1c.0: setting latency timer to 64
[    0.194476] ACPI: Battery Slot [BAT1] (battery present)
[    0.195128] input: Power Button (FF) as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input0
[    0.195559] input: Lid Switch as /devices/LNXSYSTM:00/device:00/PNP0C0D:00/input/input1
[    0.196100] ACPI: Lid Switch [LID0]
[    0.196421] input: Power Button (CM) as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input2
[    0.196482] ACPI: Power Button (CM) [PWRB]
[    0.196721] input: Sleep Button (CM) as /devices/LNXSYSTM:00/device:00/PNP0C0E:00/input/input3
[    0.196769] ACPI: Sleep Button (CM) [SLPB]
[    0.197840] fan PNP0C0B:00: registered as cooling_device0
[    0.197883] ACPI: Fan [FAN1] (on)
[    0.199050] ACPI: CPU0 (power states: C1[C1] C2[C2] C3[C3])
[    0.199300] processor ACPI_CPU:00: registered as cooling_device1
[    0.199344] ACPI: Processor [CPU0] (supports 2 throttling states)
[    0.205680] thermal LNXTHERM:01: registered as thermal_zone0
[    0.206490] ACPI: Thermal Zone [THRM] (58 C)
[    0.206678] Event-channel device installed.
[    0.213147] hpet_acpi_add: no address or irqs in _CRS
[    0.216045] brd: module loaded
[    0.217608] xen: --> irq=22
[    0.217651] xen_set_ioapic_routing: irq 22 gsi 22 vector 176 ioapic 0 pin 22 triggering 1 polarity 1
[    0.217705] b44 0000:02:05.0: PCI INT A -> GSI 22 (level, low) -> IRQ 22
[    0.330176] ssb: Sonics Silicon Backplane found on PCI device 0000:02:05.0
[    0.330297] b44.c:v2.0
[    0.370317] eth0: Broadcom 44xx/47xx 10/100BaseT Ethernet 00:00:f0:7a:09:cd
[    0.370430] netconsole: local port 19000
[    0.370471] netconsole: local IP 10.32.1.43
[    0.370511] netconsole: interface eth0
[    0.370551] netconsole: remote port 19000
[    0.370591] netconsole: remote IP 10.32.1.1
[    0.370632] netconsole: remote ethernet address 00:18:f3:59:d7:4f
[    0.370674] netconsole: device eth0 not up yet, forcing it
[    3.226382]   #0 [0000000000 - 0000001000]   BIOS data page ==> [0000000000 - 0000001000]
[    3.226382]  00000000 - 20000000 page 4k
[    3.226382]     0: 0x00000010 -> 0x0000009f
[    3.226382]     0: 0x00000100 -> 0x000008f7
[    3.226382]     0: 0x00000978 -> 0x00020000
[    3.226382] 0MB HIGHMEM available.
[    3.226382]   #1 [0000978000 - 0000983000]   XEN PAGETABLES ==> [0000978000 - 0000983000]
[    3.226382]   #2 [0000001000 - 0000002000]    EX TRAMPOLINE ==> [0000001000 - 0000002000]
[    3.226382]   #3 [0000006000 - 0000007000]       TRAMPOLINE ==> [0000006000 - 0000007000]
[    3.226382]   #4 [0000100000 - 0000550e0c]    TEXT DATA BSS ==> [0000100000 - 0000550e0c]
[    3.226382]   #5 [0000551000 - 00008f7000]          RAMDISK ==> [0000551000 - 00008f7000]
[    3.226382] 512MB LOWMEM available.
[    3.226382]   #6 [0000983000 - 00009ca140]              BRK ==> [0000983000 - 00009ca140]
[    3.226382]   #7 [00009cb000 - 0000a86000]          PGTABLE ==> [00009cb000 - 0000a86000]
[    3.226382]   #8 [0000010000 - 0000014000]          BOOTMAP ==> [0000010000 - 0000014000]
[    3.226382] (9 early reservations) ==> bootmem [0000000000 - 0020000000]
[    3.226382] ACPI: APIC 3F69EF0A, 005A (r1 INTEL  ALVISO    6040000 LOHR       5F)
[    3.226382] ACPI: BOOT 3F69EFD8, 0028 (r1 PTLTD  $SBFTBL$  6040000  LTP        1)
[    3.226382] ACPI: DSDT 3F6996B0, 57E6 (r1 INTEL  ALVISO    6040000 INTL 20030224)
[    3.226382] ACPI: FACP 3F69EE96, 0074 (r1 INTEL  ALVISO    6040000 LOHR       5F)
[    3.226382] ACPI: FACS 3F6AFFC0, 0040
[    3.226382] ACPI: HPET 3F69EF64, 0038 (r1 INTEL  ALVISO    6040000 LOHR       5F)
[    3.226382] ACPI: HPET id: 0x8086a201 base: 0xfed00000
[    3.226382] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[    3.226382] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[    3.226382] ACPI: IOAPIC (id[0x01] address[0xfec00000] gsi_base[0])
[    3.226382] ACPI: IRQ0 used by override.
[    3.226382] ACPI: IRQ2 used by override.
[    3.226382] ACPI: IRQ9 used by override.
[    3.226382] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
[    3.226382] ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
[    3.226382] ACPI: Local APIC address 0xfee00000
[    3.226382] ACPI: Local APIC address 0xfee00000
[    3.226382] ACPI: MCFG 3F69EF9C, 003C (r1 INTEL  ALVISO    6040000 LOHR       5F)
[    3.226382] ACPI: PM-Timer IO Port: 0x1008
[    3.226382] ACPI: RSDP 000F76D0, 0014 (r0 PTLTD )
[    3.226382] ACPI: RSDT 3F698C8C, 0048 (r1 PTLTD  Ohlone00  6040000  LTP        0)
[    3.226382] ACPI: SSDT 3F698CD4, 00C9 (r1  PmRef    CpuPm     3000 INTL 20030224)
[    3.226382] ACPI: SSDT 3F698D9D, 01BA (r1  PmRef  Cpu0Cst     3001 INTL 20030224)
[    3.226382] ACPI: SSDT 3F698F57, 031B (r1  PmRef  Cpu0Ist     3000 INTL 20030224)
[    3.226382] ACPI: SSDT 3F699482, 022E (r1 SataRe SataAhci     1000 INTL 20030224)
[    3.226382] Allocating PCI resources starting at 50000000 (gap: 40000000:a0000000)
[    3.226382]   AMD AuthenticAMD
[    3.226382] BIOS-provided physical RAM map:
[    3.226382]   Centaur CentaurHauls
[    3.226382] console [earlyvga0] enabled
[    3.226382]   Cyrix CyrixInstead
[    3.226382]   DMA      0x00000010 -> 0x00001000
[    3.226382]   DMA zone: 0 pages reserved
[    3.226382]   DMA zone: 32 pages used for memmap
[    3.226382]   DMA zone: 3822 pages, LIFO batch:0
[    3.226382] DMI present.
[    3.226382] early_node_map[3] active PFN ranges
[    3.226382] Enabling APIC mode:  Flat.  Using 1 I/O APICs
[    3.226382] FADT: X_PM1a_EVT_BLK.bit_width (16) does not match PM1_EVT_LEN (4)
[    3.226382] free_area_init_node: node 0, pgdat c0477780, node_mem_map c1000200
[    3.226382]   HighMem  0x00020000 -> 0x00020000
[    3.226382] init_memory_mapping: 00000000-20000000
[    3.226382]   Intel GenuineIntel
[    3.226382] IOAPIC[0]: apic_id 255, version 32, address 0xfec00000, GSI 0-23
[    3.226382] IOAPIC[0]: Unable to change apic_id!
[    3.226382] kernel direct mapping tables up to 20000000 @ 9cb000-acf000
[    3.226382] KERNEL supported cpus:
[    3.226382] last_pfn = 0x20000 max_arch_pfn = 0x1000000
[    3.226382] Linux version 2.6.29-rc7-tip (root@cascus) (gcc version 3.4.6 (Gentoo Hardened 3.4.6-r2 p1.5, ssp-3.4.6-1.0, pie-8.7.10)) #4 SMP Fri Mar 6 00:33:03 CET 2009
[    3.226382]   low ram: 0 - 20000000
[    3.226382]   mapped low ram: 0 - 20000000
[    3.226382] Movable zone start PFN for each node
[    3.226382]   node 0 bootmap 00010000 - 00014000
[    3.226382]   node 0 low ram: 00000000 - 20000000
[    3.226382]   Normal   0x00001000 -> 0x00020000
[    3.226382]   Normal zone: 125984 pages, LIFO batch:31
[    3.226382]   Normal zone: 992 pages used for memmap
[    3.226382] NR_CPUS:8 nr_cpumask_bits:8 nr_cpu_ids:1 nr_node_ids:1
[    3.226382] nr_irqs_gsi: 24
[    3.226382]   NSC Geode by NSC
[    3.226382] On node 0 totalpages: 130830
[    3.226382] PERCPU: Allocated 7 4k pages, static data 24988 bytes
[    3.226382] Phoenix BIOS detected: BIOS may corrupt low RAM, working around it.
[    3.226382] RAMDISK: 00551000 - 008f7000
[    3.226382] Reserving virtual address space above 0xf5800000
[    3.226382] SMP: Allowing 1 CPUs, 0 hotplug CPUs
[    3.226382]   Transmeta GenuineTMx86
[    3.226382]   Transmeta TransmetaCPU
[    3.226382]   UMC UMC UMC UMC
[    3.226382] Using ACPI (MADT) for SMP configuration information
[    3.226382] Using APIC driver default
[    3.226382]  Xen: 0000000000000000 - 000000000009f800 (usable)
[    3.226382]  Xen: 000000000009f800 - 0000000000100000 (reserved)
[    3.226382]  Xen: 0000000000100000 - 00000000008f7000 (usable)
[    3.226382]  Xen: 00000000008f7000 - 0000000000978000 (reserved)
[    3.226382]  Xen: 0000000000978000 - 0000000020000000 (usable)
[    3.226382]  Xen: 000000003f690000 - 000000003f69f000 (ACPI data)
[    3.226382]  Xen: 000000003f69f000 - 000000003f700000 (ACPI NVS)
[    3.226382]  Xen: 000000003f700000 - 0000000040000000 (reserved)
[    3.226382]  Xen: 00000000e0000000 - 00000000f0006000 (reserved)
[    3.226382]  Xen: 00000000f0008000 - 00000000f000c000 (reserved)
[    3.226382]  Xen: 00000000fed00000 - 00000000fed00400 (reserved)
[    3.226382]  Xen: 00000000fed20000 - 00000000fed90000 (reserved)
[    3.226382]  Xen: 00000000ff000000 - 0000000100000000 (reserved)
[    3.226382] Zone PFN ranges:
[    3.766489] cpu 0 using vcpu_info at e0801020
[    3.766489] Xen: using vcpu_info placement
[    4.040243] b44: eth0: Link is up at 100 Mbps, full duplex.
[    4.040286] b44: eth0: Flow control is off for TX and off for RX.
[    4.040466] console [netcon0] enabled
[    4.062347] netconsole: network logging started
[    4.062602] Driver 'sd' needs updating - please use bus_type methods
[    4.062728] Driver 'sr' needs updating - please use bus_type methods
[    4.062927] ata_piix 0000:00:1f.1: version 2.12
[    4.062983] xen: registering gsi 18 triggering 0 polarity 1
[    4.063056] xen: --> irq=18
[    4.063099] xen_set_ioapic_routing: irq 18 gsi 18 vector 184 ioapic 0 pin 18 triggering 1 polarity 1
[    4.063166] ata_piix 0000:00:1f.1: PCI INT A -> GSI 18 (level, low) -> IRQ 18
[    4.063294] ata_piix 0000:00:1f.1: setting latency timer to 64
[    4.063480] scsi0 : ata_piix
[    4.063759] scsi1 : ata_piix
[    4.065394] ata1: PATA max UDMA/100 cmd 0x1f0 ctl 0x3f6 bmdma 0x1810 irq 14
[    4.065437] ata2: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0x1818 irq 15
[    4.118089] trying to map vcpu_info 0 at e0801020, mfn 3e004, offset 32
[    4.260863] ata1.00: ATA-6: HTS541080G9AT00, MB4OA60A, max UDMA/100
[    4.260921] ata1.00: 155490289 sectors, multi 16: LBA48 
[    4.261024] ata1.01: ATAPI: DV-W28EA, S.0A, max UDMA/33
[    4.300623] ata1.00: configured for UDMA/100
[    4.340416] ata1.01: configured for UDMA/33
[    4.351131] scsi 0:0:0:0: Direct-Access     ATA      HTS541080G9AT00  MB4O PQ: 0 ANSI: 5
[    4.351526] sd 0:0:0:0: [sda] 155490289 512-byte hardware sectors: (79.6 GB/74.1 GiB)
[    4.351613] sd 0:0:0:0: [sda] Write Protect is off
[    4.351660] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[    4.351788] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[    4.351963] sd 0:0:0:0: [sda] 155490289 512-byte hardware sectors: (79.6 GB/74.1 GiB)
[    4.352047] sd 0:0:0:0: [sda] Write Protect is off
[    4.352092] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[    4.352217] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[    4.352269]  sda: sda1 sda2 < sda5 sda6 sda7 sda8 >
[    4.433753] sd 0:0:0:0: [sda] Attached SCSI disk
[    4.433999] sd 0:0:0:0: Attached scsi generic sg0 type 0
[    4.435764] scsi 0:0:1:0: CD-ROM            TEAC     DV-W28EA         S.0A PQ: 0 ANSI: 5
[    4.470818] sr0: scsi3-mmc drive: 24x/24x writer dvd-ram cd/rw xa/form2 cdda tray
[    4.470869] Uniform CD-ROM driver Revision: 3.20
[    4.471123] sr 0:0:1:0: Attached scsi CD-ROM sr0
[    4.471343] sr 0:0:1:0: Attached scsi generic sg1 type 5
[    4.471469] ata2: port disabled. ignoring.
[    4.471779] PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12
[    4.474611] i8042.c: Detected active multiplexing controller, rev 1.1.
[    4.476411] serio: i8042 KBD port at 0x60,0x64 irq 1
[    4.476473] serio: i8042 AUX0 port at 0x60,0x64 irq 12
[    4.476539] serio: i8042 AUX1 port at 0x60,0x64 irq 12
[    4.476584] serio: i8042 AUX2 port at 0x60,0x64 irq 12
[    4.476641] serio: i8042 AUX3 port at 0x60,0x64 irq 12
[    4.476834] mice: PS/2 mouse device common for all mice
[    4.477862] rtc_cmos 00:07: rtc core: registered rtc_cmos as rtc0
[    4.477965] rtc0: alarms up to one month, y3k, 242 bytes nvram
[    4.478245] device-mapper: ioctl: 4.14.0-ioctl (2008-04-23) initialised: dm-devel@redhat.com
[    4.478652] cpuidle: using governor ladder
[    4.478780] TCP cubic registered
[    4.478824] NET: Registered protocol family 17
[    4.478902] Using IPI No-Shortcut mode
[    4.478945] IO APIC resources could be not be allocated.
[    4.479467] rtc_cmos 00:07: setting system clock to 2009-03-06 00:10:09 UTC (1236298209)
[    4.479673] Freeing unused kernel memory: 312k freed
[    4.480933] Write protecting the kernel text: 2616k
[    4.481300] Write protecting the kernel read-only data: 800k
[    4.500490] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input4
[    4.523136] Marking TSC unstable due to TSC halts in idle

[   59.665835] Clocksource tsc unstable (delta = -54153771637 ns)
[   59.674669] ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6 frozen
[   59.674669] ata1.00: cmd c8/00:80:9f:01:00/00:00:00:00:00/e0 tag 0 dma 65536 in
[   59.674669]          res 40/00:03:00:00:00/00:00:00:00:00/b0 Emask 0x4 (timeout)
[   59.674669] ata1.00: status: { DRDY }
[   62.359425] ata1: soft resetting link
[   64.151416] ata1.00: configured for UDMA/100
[   64.789264] ata1.01: configured for UDMA/33
[   65.223423] ata1: EH complete
[   65.512842] sd 0:0:0:0: [sda] 155490289 512-byte hardware sectors: (79.6 GB/74.1 GiB)
[   65.512842] sd 0:0:0:0: [sda] Write Protect is off
[   65.512842] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[   65.512842] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[   65.535362] sd 0:0:0:0: [sda] 155490289 512-byte hardware sectors: (79.6 GB/74.1 GiB)
[   65.539998] sd 0:0:0:0: [sda] Write Protect is off
[   65.542485] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[   65.543740] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[   70.583796] SysRq : Changing Loglevel
[   70.583931] Loglevel set to 9
[   70.605760] SysRq : Changing Loglevel
[   70.605889] Loglevel set to 9
[  201.566346] BUG: soft lockup - CPU#0 stuck for 121s! [busybox:450]
[  201.573542] Modules linked in:
[  201.573542] 
[  201.573542] Pid: 450, comm: busybox Not tainted (2.6.29-rc7-tip #4) SX20S
[  201.573542] EIP: 0061:[<c0252266>] EFLAGS: 00000286 CPU: 0
[  201.573542] EIP is at __copy_to_user_ll+0x6/0x70
[  201.573542] EAX: bff3d1d8 EBX: 00000004 ECX: 00000004 EDX: df2e3e68
[  201.573542] ESI: 00000001 EDI: df2e3e70 EBP: df2e3e2c ESP: df2e3e24
[  201.573542]  DS: 007b ES: 007b FS: 00d8 GS: 0033 SS: 0069
[  201.573542] CR0: 8005003b CR2: b80a2000 CR3: 1f345000 CR4: 00000660
[  201.573542] DR0: 00000000 DR1: 00000000 DR2: 00000000 DR3: 00000000
[  201.573542] DR6: ffff0ff0 DR7: 00000400
[  201.573542] Call Trace:
[  201.573542]  [<c019d0a0>] core_sys_select+0x220/0x340
[  201.573542]  [<c0105f6a>] ? xen_force_evtchn_callback+0x1a/0x30
[  201.573542]  [<c0106830>] ? check_events+0x8/0xc
[  201.573542]  [<c0106827>] ? xen_restore_fl_direct_end+0x0/0x1
[  201.573542]  [<c038cf14>] ? _spin_unlock_irqrestore+0x14/0x20
[  201.573542]  [<c01494af>] ? remove_wait_queue+0x3f/0x50
[  201.573542]  [<c02a6d95>] ? n_tty_read+0x395/0x500
[  201.573542]  [<c038cf14>] ? _spin_unlock_irqrestore+0x14/0x20
[  201.573542]  [<c0105f6a>] ? xen_force_evtchn_callback+0x1a/0x30
[  201.573542]  [<c0106830>] ? check_events+0x8/0xc
[  201.573542]  [<c0105f6a>] ? xen_force_evtchn_callback+0x1a/0x30
[  201.573542]  [<c0106830>] ? check_events+0x8/0xc
[  201.573542]  [<c0106827>] ? xen_restore_fl_direct_end+0x0/0x1
[  201.573542]  [<c038cf14>] ? _spin_unlock_irqrestore+0x14/0x20
[  201.573542]  [<c01399f6>] ? current_fs_time+0x16/0x20
[  201.573542]  [<c038cea8>] ? _spin_lock+0x8/0x10
[  201.573542]  [<c019d23b>] sys_select+0x7b/0xa0
[  201.573542]  [<c0108f8c>] syscall_call+0x7/0xb
[  262.454351] hrtimer: interrupt too slow, forcing clock min delta to 45534129 ns
[  268.186442] SysRq : Changing Loglevel
[  268.186442] Loglevel set to 9
[  269.147532] SysRq : Changing Loglevel
[  269.147532] Loglevel set to 9
[  270.136134] SysRq : Changing Loglevel
[  270.136134] Loglevel set to 9

Load the CPU to get the clock running and use cryptsetup to decrypt
the hard disk. mount it:

[  955.074434] ReiserFS: dm-4: found reiserfs format "3.6" with standard journal
[  955.074434] ReiserFS: dm-4: using ordered data mode
[  955.160289] ReiserFS: dm-4: journal params: device dm-4, size 8192, journal first block 18, max trans len 1024, max batch 900, max commit age 30, max trans age 30
[  955.160568] ReiserFS: dm-4: checking transaction log (dm-4)
[  955.610730] ReiserFS: dm-4: Using r5 hash to sort names

Now start xend.

[ 1506.487070] xenbus_probe wake_waiting
[ 1506.487070] xenbus_probe wake_waiting
[ 1506.487070] xenbus_probe_devices backend
[ 1506.487070] xenbus_probe_devices failed xenbus_directory
[ 1506.487070] backend_probe_and_watch devices probed ok
[ 1506.487070] backend_probe_and_watch watch add ok ok
[ 1506.487070] backend_probe_and_watch all done



xm dmesg output:

 __  __            _____  _____  _ 
 \ \/ /___ _ __   |___ / |___ / / |
  \  // _ \ '_ \    |_ \   |_ \ | |
  /  \  __/ | | |  ___) | ___) || |
 /_/\_\___|_| |_| |____(_)____(_)_|
                                   
(XEN) Xen version 3.3.1 (root@no.g203.net) (gcc-Version 3.4.6 (Gentoo Hardened 3.4.6-r2 p1.5, ssp-3.4.6-1.0, pie-8.7.10)) Thu Mar  5 22:33:24 CET 2009
(XEN) Latest ChangeSet: unavailable
(XEN) Command line: loglvl=all guest_loglvl=all debug dom0_mem=512M console=vga
(XEN) Video information:
(XEN)  VGA is text mode 80x25, font 8x16
(XEN)  VBE/DDC methods: none; EDID transfer time: 0 seconds
(XEN)  EDID info not retrieved because no DDC retrieval method detected
(XEN) Disc information:
(XEN)  Found 2 MBR signatures
(XEN)  Found 2 EDD information structures
(XEN) Xen-e820 RAM map:
(XEN)  0000000000000000 - 000000000009f800 (usable)
(XEN)  000000000009f800 - 00000000000a0000 (reserved)
(XEN)  00000000000dc000 - 0000000000100000 (reserved)
(XEN)  0000000000100000 - 000000003f690000 (usable)
(XEN)  000000003f690000 - 000000003f69f000 (ACPI data)
(XEN)  000000003f69f000 - 000000003f700000 (ACPI NVS)
(XEN)  000000003f700000 - 0000000040000000 (reserved)
(XEN)  00000000e0000000 - 00000000f0006000 (reserved)
(XEN)  00000000f0008000 - 00000000f000c000 (reserved)
(XEN)  00000000fed00000 - 00000000fed00400 (reserved)
(XEN)  00000000fed20000 - 00000000fed90000 (reserved)
(XEN)  00000000ff000000 - 0000000100000000 (reserved)
(XEN) System RAM: 1014MB (1038524kB)
(XEN) ACPI: RSDP 000F76D0, 0014 (r0 PTLTD )
(XEN) ACPI: RSDT 3F698C8C, 0048 (r1 PTLTD  Ohlone00  6040000  LTP        0)
(XEN) ACPI: FACP 3F69EE96, 0074 (r1 INTEL  ALVISO    6040000 LOHR       5F)
(XEN) ACPI: DSDT 3F6996B0, 57E6 (r1 INTEL  ALVISO    6040000 INTL 20030224)
(XEN) ACPI: FACS 3F6AFFC0, 0040
(XEN) ACPI: APIC 3F69EF0A, 005A (r1 INTEL  ALVISO    6040000 LOHR       5F)
(XEN) ACPI: HPET 3F69EF64, 0038 (r1 INTEL  ALVISO    6040000 LOHR       5F)
(XEN) ACPI: MCFG 3F69EF9C, 003C (r1 INTEL  ALVISO    6040000 LOHR       5F)
(XEN) ACPI: BOOT 3F69EFD8, 0028 (r1 PTLTD  $SBFTBL$  6040000  LTP        1)
(XEN) ACPI: SSDT 3F699482, 022E (r1 SataRe SataAhci     1000 INTL 20030224)
(XEN) ACPI: SSDT 3F698F57, 031B (r1  PmRef  Cpu0Ist     3000 INTL 20030224)
(XEN) ACPI: SSDT 3F698D9D, 01BA (r1  PmRef  Cpu0Cst     3001 INTL 20030224)
(XEN) ACPI: SSDT 3F698CD4, 00C9 (r1  PmRef    CpuPm     3000 INTL 20030224)
(XEN) NUMA turned off
(XEN) Faking a node at 0000000000000000-000000003f690000
(XEN) Xen heap: 9MB (9780kB)
(XEN) Domain heap initialised
(XEN) DMI present.
(XEN) Using APIC driver default
(XEN) ACPI: PM-Timer IO Port: 0x1008
(XEN) ACPI: ACPI SLEEP INFO: pm1x_cnt[1004,0], pm1x_evt[1000,0]
(XEN) ACPI:                  wakeup_vec[3f6affcc], vec_size[20]
(XEN) ACPI: Local APIC address 0xfee00000
(XEN) ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
(XEN) Processor #0 6:13 APIC version 20
(XEN) ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
(XEN) ACPI: IOAPIC (id[0x01] address[0xfec00000] gsi_base[0])
(XEN) IOAPIC[0]: apic_id 1, version 32, address 0xfec00000, GSI 0-23
(XEN) ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
(XEN) ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
(XEN) ACPI: IRQ0 used by override.
(XEN) ACPI: IRQ2 used by override.
(XEN) ACPI: IRQ9 used by override.
(XEN) Enabling APIC mode:  Flat.  Using 1 I/O APICs
(XEN) ACPI: HPET id: 0x8086a201 base: 0xfed00000
(XEN) Using ACPI (MADT) for SMP configuration information
(XEN) Using scheduler: SMP Credit Scheduler (credit)
(XEN) Initializing CPU#0
(XEN) Detected 1729.072 MHz processor.
(XEN) CPU: L1 I cache: 32K, L1 D cache: 32K
(XEN) CPU: L2 cache: 2048K
(XEN) Intel machine check architecture supported.
(XEN) Intel machine check reporting enabled on CPU#0.
(XEN) CPU0: Intel(R) Pentium(R) M processor 1.73GHz stepping 08
(XEN) Total of 1 processors activated.
(XEN) ENABLING IO-APIC IRQs
(XEN)  -> Using new ACK method
(XEN) ..TIMER: vector=0xF0 apic1=0 pin1=2 apic2=-1 pin2=-1
(XEN) Platform timer is 14.318MHz HPET
(XEN) Brought up 1 CPUs
(XEN) I/O virtualisation disabled
(XEN) ACPI sleep modes: S3
(XEN) MCA: Machine check polling timer started.
(XEN) *** LOADING DOMAIN 0 ***
(XEN)  Xen  kernel: 32-bit, PAE, lsb
(XEN)  Dom0 kernel: 32-bit, PAE, lsb, paddr 0x100000 -> 0x551000
(XEN) PHYSICAL MEMORY ARRANGEMENT:
(XEN)  Dom0 alloc.:   000000003d000000->000000003e000000 (126976 pages to be allocated)
(XEN) VIRTUAL MEMORY ARRANGEMENT:
(XEN)  Loaded kernel: c0100000->c0551000
(XEN)  Init. ramdisk: c0551000->c08f7000
(XEN)  Phys-Mach map: c08f7000->c0977000
(XEN)  Start info:    c0977000->c0977474
(XEN)  Page tables:   c0978000->c0983000
(XEN)  Boot stack:    c0983000->c0984000
(XEN)  TOTAL:         c0000000->c0c00000
(XEN)  ENTRY ADDRESS: c0499000
(XEN) Dom0 has maximum 1 VCPUs
(XEN) Scrubbing Free RAM: ....done.
(XEN) Xen trace buffers: disabled
(XEN) Std. Loglevel: All
(XEN) Guest Loglevel: All
(XEN) Xen is relinquishing VGA console.
(XEN) *** Serial input -> DOM0 (type 'CTRL-a' three times to switch input to Xen)
(XEN) Freed 104kB init memory.
(XEN) io_apic.c:2213: 
(XEN) ioapic_guest_write: apic=0, pin=2, old_irq=0, new_irq=-1
(XEN) ioapic_guest_write: old_entry=000009f0, new_entry=00010900
(XEN) ioapic_guest_write: Attempt to remove IO-APIC pin of in-use IRQ!
(XEN) io_apic.c:2226: 
(XEN) ioapic_guest_write: apic=0, pin=0, old_irq=-1, new_irq=0
(XEN) ioapic_guest_write: old_entry=00010900, new_entry=000009f0
(XEN) ioapic_guest_write: Attempt to add IO-APIC pin for in-use IRQ!


Any idea?  Any info from the system which might help? 

Regards,
Milan

[-- Attachment #2: config.txt --]
[-- Type: text/plain, Size: 35054 bytes --]

#
# Automatically generated make config: don't edit
# Linux kernel version: 2.6.29-rc7
# Fri Mar  6 00:31:58 2009
#
# CONFIG_64BIT is not set
CONFIG_X86_32=y
# CONFIG_X86_64 is not set
CONFIG_X86=y
CONFIG_ARCH_DEFCONFIG="arch/x86/configs/i386_defconfig"
CONFIG_GENERIC_TIME=y
CONFIG_GENERIC_CMOS_UPDATE=y
CONFIG_CLOCKSOURCE_WATCHDOG=y
CONFIG_GENERIC_CLOCKEVENTS=y
CONFIG_GENERIC_CLOCKEVENTS_BROADCAST=y
CONFIG_LOCKDEP_SUPPORT=y
CONFIG_STACKTRACE_SUPPORT=y
CONFIG_HAVE_LATENCYTOP_SUPPORT=y
CONFIG_FAST_CMPXCHG_LOCAL=y
CONFIG_MMU=y
CONFIG_ZONE_DMA=y
CONFIG_GENERIC_ISA_DMA=y
CONFIG_GENERIC_IOMAP=y
CONFIG_GENERIC_BUG=y
CONFIG_GENERIC_HWEIGHT=y
CONFIG_ARCH_MAY_HAVE_PC_FDC=y
# CONFIG_RWSEM_GENERIC_SPINLOCK is not set
CONFIG_RWSEM_XCHGADD_ALGORITHM=y
CONFIG_ARCH_HAS_CPU_IDLE_WAIT=y
CONFIG_GENERIC_CALIBRATE_DELAY=y
# CONFIG_GENERIC_TIME_VSYSCALL is not set
CONFIG_ARCH_HAS_CPU_RELAX=y
CONFIG_ARCH_HAS_DEFAULT_IDLE=y
CONFIG_ARCH_HAS_CACHE_LINE_SIZE=y
CONFIG_HAVE_SETUP_PER_CPU_AREA=y
CONFIG_HAVE_DYNAMIC_PER_CPU_AREA=y
# CONFIG_HAVE_CPUMASK_OF_CPU_MAP is not set
CONFIG_ARCH_HIBERNATION_POSSIBLE=y
CONFIG_ARCH_SUSPEND_POSSIBLE=y
# CONFIG_ZONE_DMA32 is not set
CONFIG_ARCH_POPULATES_NODE_MAP=y
# CONFIG_AUDIT_ARCH is not set
CONFIG_ARCH_SUPPORTS_OPTIMIZED_INLINING=y
CONFIG_GENERIC_HARDIRQS=y
CONFIG_GENERIC_IRQ_PROBE=y
CONFIG_GENERIC_PENDING_IRQ=y
CONFIG_USE_GENERIC_SMP_HELPERS=y
CONFIG_X86_32_SMP=y
CONFIG_X86_HT=y
CONFIG_X86_TRAMPOLINE=y
CONFIG_X86_32_LAZY_GS=y
CONFIG_KTIME_SCALAR=y
CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"

#
# General setup
#
CONFIG_EXPERIMENTAL=y
CONFIG_LOCK_KERNEL=y
CONFIG_INIT_ENV_ARG_LIMIT=32
CONFIG_LOCALVERSION=""
# CONFIG_LOCALVERSION_AUTO is not set
CONFIG_HAVE_KERNEL_GZIP=y
CONFIG_HAVE_KERNEL_BZIP2=y
CONFIG_HAVE_KERNEL_LZMA=y
CONFIG_KERNEL_GZIP=y
# CONFIG_KERNEL_BZIP2 is not set
# CONFIG_KERNEL_LZMA is not set
CONFIG_SWAP=y
CONFIG_SYSVIPC=y
CONFIG_SYSVIPC_SYSCTL=y
# CONFIG_POSIX_MQUEUE is not set
CONFIG_BSD_PROCESS_ACCT=y
CONFIG_BSD_PROCESS_ACCT_V3=y
# CONFIG_TASKSTATS is not set
# CONFIG_AUDIT is not set

#
# RCU Subsystem
#
CONFIG_CLASSIC_RCU=y
# CONFIG_TREE_RCU is not set
# CONFIG_PREEMPT_RCU is not set
# CONFIG_TREE_RCU_TRACE is not set
# CONFIG_PREEMPT_RCU_TRACE is not set
CONFIG_IKCONFIG=y
CONFIG_IKCONFIG_PROC=y
CONFIG_LOG_BUF_SHIFT=18
CONFIG_HAVE_UNSTABLE_SCHED_CLOCK=y
# CONFIG_GROUP_SCHED is not set
# CONFIG_CGROUPS is not set
# CONFIG_SYSFS_DEPRECATED_V2 is not set
# CONFIG_RELAY is not set
CONFIG_NAMESPACES=y
# CONFIG_UTS_NS is not set
# CONFIG_IPC_NS is not set
# CONFIG_USER_NS is not set
# CONFIG_PID_NS is not set
# CONFIG_NET_NS is not set
CONFIG_BLK_DEV_INITRD=y
CONFIG_INITRAMFS_SOURCE=""
CONFIG_RD_GZIP=y
# CONFIG_RD_BZIP2 is not set
# CONFIG_RD_LZMA is not set
CONFIG_INITRAMFS_COMPRESSION_NONE=y
# CONFIG_INITRAMFS_COMPRESSION_GZIP is not set
# CONFIG_INITRAMFS_COMPRESSION_BZIP2 is not set
# CONFIG_INITRAMFS_COMPRESSION_LZMA is not set
# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
CONFIG_SYSCTL=y
# CONFIG_EMBEDDED is not set
CONFIG_UID16=y
CONFIG_SYSCTL_SYSCALL=y
CONFIG_KALLSYMS=y
# CONFIG_KALLSYMS_ALL is not set
# CONFIG_KALLSYMS_EXTRA_PASS is not set
CONFIG_HOTPLUG=y
CONFIG_PRINTK=y
CONFIG_BUG=y
CONFIG_ELF_CORE=y
CONFIG_PCSPKR_PLATFORM=y
# CONFIG_COMPAT_BRK is not set
CONFIG_BASE_FULL=y
CONFIG_FUTEX=y
CONFIG_ANON_INODES=y
CONFIG_EPOLL=y
CONFIG_SIGNALFD=y
CONFIG_TIMERFD=y
CONFIG_EVENTFD=y
CONFIG_SHMEM=y
CONFIG_AIO=y
CONFIG_HAVE_PERF_COUNTERS=y

#
# Performance Counters
#
CONFIG_PERF_COUNTERS=y
CONFIG_VM_EVENT_COUNTERS=y
CONFIG_PCI_QUIRKS=y
CONFIG_SLAB=y
# CONFIG_SLUB is not set
# CONFIG_SLOB is not set
# CONFIG_PROFILING is not set
# CONFIG_MARKERS is not set
CONFIG_HAVE_OPROFILE=y
# CONFIG_KPROBES is not set
CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS=y
CONFIG_HAVE_IOREMAP_PROT=y
CONFIG_HAVE_KPROBES=y
CONFIG_HAVE_KRETPROBES=y
CONFIG_HAVE_ARCH_TRACEHOOK=y
CONFIG_HAVE_GENERIC_DMA_COHERENT=y
CONFIG_SLABINFO=y
CONFIG_RT_MUTEXES=y
CONFIG_BASE_SMALL=0
CONFIG_MODULES=y
# CONFIG_MODULE_FORCE_LOAD is not set
CONFIG_MODULE_UNLOAD=y
CONFIG_MODULE_FORCE_UNLOAD=y
CONFIG_MODVERSIONS=y
# CONFIG_MODULE_SRCVERSION_ALL is not set
CONFIG_STOP_MACHINE=y
CONFIG_BLOCK=y
# CONFIG_LBD is not set
# CONFIG_BLK_DEV_BSG is not set
# CONFIG_BLK_DEV_INTEGRITY is not set

#
# IO Schedulers
#
CONFIG_IOSCHED_NOOP=y
# CONFIG_IOSCHED_AS is not set
# CONFIG_IOSCHED_DEADLINE is not set
CONFIG_IOSCHED_CFQ=y
# CONFIG_DEFAULT_AS is not set
# CONFIG_DEFAULT_DEADLINE is not set
CONFIG_DEFAULT_CFQ=y
# CONFIG_DEFAULT_NOOP is not set
CONFIG_DEFAULT_IOSCHED="cfq"
CONFIG_FREEZER=y

#
# Processor type and features
#
CONFIG_TICK_ONESHOT=y
# CONFIG_NO_HZ is not set
CONFIG_HIGH_RES_TIMERS=y
CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
CONFIG_SMP=y
# CONFIG_SPARSE_IRQ is not set
CONFIG_X86_MPPARSE=y
# CONFIG_X86_BIGSMP is not set
# CONFIG_X86_EXTENDED_PLATFORM is not set
# CONFIG_SCHED_OMIT_FRAME_POINTER is not set
CONFIG_PARAVIRT_GUEST=y
CONFIG_XEN=y
CONFIG_XEN_MAX_DOMAIN_MEMORY=8
CONFIG_XEN_SAVE_RESTORE=y
CONFIG_XEN_DOM0=y
CONFIG_XEN_PRIVILEGED_GUEST=y
CONFIG_XEN_DOM0_PCI=y
# CONFIG_VMI is not set
# CONFIG_KVM_CLOCK is not set
# CONFIG_KVM_GUEST is not set
CONFIG_PARAVIRT=y
CONFIG_PARAVIRT_CLOCK=y
# CONFIG_PARAVIRT_DEBUG is not set
# CONFIG_MEMTEST is not set
# CONFIG_M386 is not set
# CONFIG_M486 is not set
# CONFIG_M586 is not set
# CONFIG_M586TSC is not set
# CONFIG_M586MMX is not set
# CONFIG_M686 is not set
# CONFIG_MPENTIUMII is not set
# CONFIG_MPENTIUMIII is not set
CONFIG_MPENTIUMM=y
# CONFIG_MPENTIUM4 is not set
# CONFIG_MK6 is not set
# CONFIG_MK7 is not set
# CONFIG_MK8 is not set
# CONFIG_MCRUSOE is not set
# CONFIG_MEFFICEON is not set
# CONFIG_MWINCHIPC6 is not set
# CONFIG_MWINCHIP3D is not set
# CONFIG_MGEODEGX1 is not set
# CONFIG_MGEODE_LX is not set
# CONFIG_MCYRIXIII is not set
# CONFIG_MVIAC3_2 is not set
# CONFIG_MVIAC7 is not set
# CONFIG_MPSC is not set
# CONFIG_MCORE2 is not set
# CONFIG_GENERIC_CPU is not set
# CONFIG_X86_GENERIC is not set
CONFIG_X86_CPU=y
CONFIG_X86_L1_CACHE_BYTES=64
CONFIG_X86_INTERNODE_CACHE_BYTES=64
CONFIG_X86_CMPXCHG=y
CONFIG_X86_L1_CACHE_SHIFT=6
CONFIG_X86_XADD=y
CONFIG_X86_WP_WORKS_OK=y
CONFIG_X86_INVLPG=y
CONFIG_X86_BSWAP=y
CONFIG_X86_POPAD_OK=y
CONFIG_X86_INTEL_USERCOPY=y
CONFIG_X86_USE_PPRO_CHECKSUM=y
CONFIG_X86_TSC=y
CONFIG_X86_CMPXCHG64=y
CONFIG_X86_CMOV=y
CONFIG_X86_MINIMUM_CPU_FAMILY=4
CONFIG_X86_DEBUGCTLMSR=y
CONFIG_CPU_SUP_INTEL=y
CONFIG_CPU_SUP_CYRIX_32=y
CONFIG_CPU_SUP_AMD=y
CONFIG_CPU_SUP_CENTAUR_32=y
CONFIG_CPU_SUP_TRANSMETA_32=y
CONFIG_CPU_SUP_UMC_32=y
# CONFIG_X86_DS is not set
# CONFIG_X86_PTRACE_BTS is not set
CONFIG_HPET_TIMER=y
CONFIG_HPET_EMULATE_RTC=y
CONFIG_DMI=y
CONFIG_SWIOTLB=y
CONFIG_IOMMU_HELPER=y
# CONFIG_IOMMU_API is not set
CONFIG_NR_CPUS=8
# CONFIG_SCHED_SMT is not set
# CONFIG_SCHED_MC is not set
CONFIG_PREEMPT_NONE=y
# CONFIG_PREEMPT_VOLUNTARY is not set
# CONFIG_PREEMPT is not set
CONFIG_X86_LOCAL_APIC=y
CONFIG_X86_IO_APIC=y
# CONFIG_X86_REROUTE_FOR_BROKEN_BOOT_IRQS is not set
# CONFIG_X86_MCE is not set
CONFIG_VM86=y
# CONFIG_TOSHIBA is not set
# CONFIG_I8K is not set
# CONFIG_X86_REBOOTFIXUPS is not set
# CONFIG_MICROCODE is not set
# CONFIG_X86_MSR is not set
# CONFIG_X86_CPUID is not set
# CONFIG_NOHIGHMEM is not set
# CONFIG_HIGHMEM4G is not set
CONFIG_HIGHMEM64G=y
CONFIG_PAGE_OFFSET=0xC0000000
CONFIG_HIGHMEM=y
CONFIG_X86_PAE=y
CONFIG_ARCH_PHYS_ADDR_T_64BIT=y
CONFIG_ARCH_FLATMEM_ENABLE=y
CONFIG_ARCH_SPARSEMEM_ENABLE=y
CONFIG_ARCH_SELECT_MEMORY_MODEL=y
CONFIG_ILLEGAL_POINTER_VALUE=0
CONFIG_SELECT_MEMORY_MODEL=y
CONFIG_FLATMEM_MANUAL=y
# CONFIG_DISCONTIGMEM_MANUAL is not set
# CONFIG_SPARSEMEM_MANUAL is not set
CONFIG_FLATMEM=y
CONFIG_FLAT_NODE_MEM_MAP=y
CONFIG_SPARSEMEM_STATIC=y
CONFIG_PAGEFLAGS_EXTENDED=y
CONFIG_SPLIT_PTLOCK_CPUS=4
CONFIG_PHYS_ADDR_T_64BIT=y
CONFIG_ZONE_DMA_FLAG=1
CONFIG_BOUNCE=y
CONFIG_VIRT_TO_BUS=y
CONFIG_UNEVICTABLE_LRU=y
CONFIG_MMU_NOTIFIER=y
# CONFIG_HIGHPTE is not set
# CONFIG_X86_CHECK_BIOS_CORRUPTION is not set
CONFIG_X86_RESERVE_LOW_64K=y
# CONFIG_MATH_EMULATION is not set
# CONFIG_MTRR is not set
# CONFIG_EFI is not set
# CONFIG_SECCOMP is not set
# CONFIG_CC_STACKPROTECTOR is not set
CONFIG_HZ_100=y
# CONFIG_HZ_250 is not set
# CONFIG_HZ_300 is not set
# CONFIG_HZ_1000 is not set
CONFIG_HZ=100
CONFIG_SCHED_HRTICK=y
# CONFIG_KEXEC is not set
# CONFIG_CRASH_DUMP is not set
CONFIG_PHYSICAL_START=0x100000
# CONFIG_RELOCATABLE is not set
CONFIG_PHYSICAL_ALIGN=0x100000
CONFIG_HOTPLUG_CPU=y
# CONFIG_COMPAT_VDSO is not set
# CONFIG_CMDLINE_BOOL is not set
CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y

#
# Power management and ACPI options
#
CONFIG_PM=y
# CONFIG_PM_DEBUG is not set
CONFIG_PM_SLEEP_SMP=y
CONFIG_PM_SLEEP=y
# CONFIG_SUSPEND is not set
# CONFIG_HIBERNATION is not set
CONFIG_ACPI=y
# CONFIG_ACPI_PROCFS is not set
# CONFIG_ACPI_PROCFS_POWER is not set
CONFIG_ACPI_SYSFS_POWER=y
# CONFIG_ACPI_PROC_EVENT is not set
CONFIG_ACPI_AC=y
CONFIG_ACPI_BATTERY=y
CONFIG_ACPI_BUTTON=y
CONFIG_ACPI_FAN=y
CONFIG_ACPI_DOCK=y
CONFIG_ACPI_PROCESSOR=y
CONFIG_ACPI_HOTPLUG_CPU=y
CONFIG_ACPI_THERMAL=y
# CONFIG_ACPI_CUSTOM_DSDT is not set
CONFIG_ACPI_BLACKLIST_YEAR=0
# CONFIG_ACPI_DEBUG is not set
# CONFIG_ACPI_PCI_SLOT is not set
CONFIG_X86_PM_TIMER=y
CONFIG_ACPI_CONTAINER=y
# CONFIG_ACPI_SBS is not set
# CONFIG_APM is not set

#
# CPU Frequency scaling
#
# CONFIG_CPU_FREQ is not set
CONFIG_CPU_IDLE=y
CONFIG_CPU_IDLE_GOV_LADDER=y

#
# Bus options (PCI etc.)
#
CONFIG_PCI=y
# CONFIG_PCI_GOBIOS is not set
# CONFIG_PCI_GOMMCONFIG is not set
# CONFIG_PCI_GODIRECT is not set
# CONFIG_PCI_GOOLPC is not set
CONFIG_PCI_GOANY=y
CONFIG_PCI_BIOS=y
CONFIG_PCI_DIRECT=y
CONFIG_PCI_MMCONFIG=y
CONFIG_PCI_XEN=y
CONFIG_PCI_DOMAINS=y
CONFIG_PCIEPORTBUS=y
CONFIG_PCIEAER=y
# CONFIG_PCIEASPM is not set
CONFIG_ARCH_SUPPORTS_MSI=y
# CONFIG_PCI_MSI is not set
CONFIG_PCI_LEGACY=y
# CONFIG_PCI_DEBUG is not set
# CONFIG_PCI_STUB is not set
CONFIG_HT_IRQ=y
CONFIG_ISA_DMA_API=y
# CONFIG_ISA is not set
# CONFIG_MCA is not set
# CONFIG_SCx200 is not set
# CONFIG_OLPC is not set
# CONFIG_PCCARD is not set
# CONFIG_HOTPLUG_PCI is not set

#
# Executable file formats / Emulations
#
CONFIG_BINFMT_ELF=y
# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set
CONFIG_HAVE_AOUT=y
# CONFIG_BINFMT_AOUT is not set
# CONFIG_BINFMT_MISC is not set
CONFIG_HAVE_ATOMIC_IOMAP=y
CONFIG_NET=y

#
# Networking options
#
CONFIG_COMPAT_NET_DEV_OPS=y
CONFIG_PACKET=y
CONFIG_PACKET_MMAP=y
CONFIG_UNIX=y
# CONFIG_NET_KEY is not set
CONFIG_INET=y
# CONFIG_IP_MULTICAST is not set
# CONFIG_IP_ADVANCED_ROUTER is not set
CONFIG_IP_FIB_HASH=y
# CONFIG_IP_PNP is not set
# CONFIG_NET_IPIP is not set
# CONFIG_NET_IPGRE is not set
# CONFIG_ARPD is not set
CONFIG_SYN_COOKIES=y
# CONFIG_INET_AH is not set
# CONFIG_INET_ESP is not set
# CONFIG_INET_IPCOMP is not set
# CONFIG_INET_XFRM_TUNNEL is not set
# CONFIG_INET_TUNNEL is not set
# CONFIG_INET_XFRM_MODE_TRANSPORT is not set
# CONFIG_INET_XFRM_MODE_TUNNEL is not set
# CONFIG_INET_XFRM_MODE_BEET is not set
# CONFIG_INET_LRO is not set
CONFIG_INET_DIAG=y
CONFIG_INET_TCP_DIAG=y
# CONFIG_TCP_CONG_ADVANCED is not set
CONFIG_TCP_CONG_CUBIC=y
CONFIG_DEFAULT_TCP_CONG="cubic"
# CONFIG_TCP_MD5SIG is not set
# CONFIG_IPV6 is not set
# CONFIG_NETWORK_SECMARK is not set
# CONFIG_NETFILTER is not set
# CONFIG_IP_DCCP is not set
# CONFIG_IP_SCTP is not set
# CONFIG_TIPC is not set
# CONFIG_ATM is not set
# CONFIG_BRIDGE is not set
# CONFIG_NET_DSA is not set
# CONFIG_VLAN_8021Q is not set
# CONFIG_DECNET is not set
# CONFIG_LLC2 is not set
# CONFIG_IPX is not set
# CONFIG_ATALK is not set
# CONFIG_X25 is not set
# CONFIG_LAPB is not set
# CONFIG_ECONET is not set
# CONFIG_WAN_ROUTER is not set
# CONFIG_NET_SCHED is not set
# CONFIG_DCB is not set

#
# Network testing
#
# CONFIG_NET_PKTGEN is not set
# CONFIG_HAMRADIO is not set
# CONFIG_CAN is not set
# CONFIG_IRDA is not set
# CONFIG_BT is not set
# CONFIG_AF_RXRPC is not set
# CONFIG_PHONET is not set
# CONFIG_WIRELESS is not set
# CONFIG_WIMAX is not set
# CONFIG_RFKILL is not set

#
# Device Drivers
#

#
# Generic Driver Options
#
CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
CONFIG_STANDALONE=y
# CONFIG_PREVENT_FIRMWARE_BUILD is not set
CONFIG_FW_LOADER=y
# CONFIG_FIRMWARE_IN_KERNEL is not set
CONFIG_EXTRA_FIRMWARE=""
# CONFIG_DEBUG_DRIVER is not set
# CONFIG_DEBUG_DEVRES is not set
# CONFIG_SYS_HYPERVISOR is not set
# CONFIG_CONNECTOR is not set
# CONFIG_MTD is not set
# CONFIG_PARPORT is not set
CONFIG_PNP=y
CONFIG_PNP_DEBUG_MESSAGES=y

#
# Protocols
#
CONFIG_PNPACPI=y
CONFIG_BLK_DEV=y
# CONFIG_BLK_DEV_FD is not set
# CONFIG_BLK_CPQ_DA is not set
# CONFIG_BLK_CPQ_CISS_DA is not set
# CONFIG_BLK_DEV_DAC960 is not set
# CONFIG_BLK_DEV_UMEM is not set
# CONFIG_BLK_DEV_COW_COMMON is not set
CONFIG_BLK_DEV_LOOP=y
# CONFIG_BLK_DEV_CRYPTOLOOP is not set
# CONFIG_BLK_DEV_NBD is not set
# CONFIG_BLK_DEV_SX8 is not set
# CONFIG_BLK_DEV_UB is not set
CONFIG_BLK_DEV_RAM=y
CONFIG_BLK_DEV_RAM_COUNT=16
CONFIG_BLK_DEV_RAM_SIZE=4096
# CONFIG_BLK_DEV_XIP is not set
# CONFIG_CDROM_PKTCDVD is not set
# CONFIG_ATA_OVER_ETH is not set
# CONFIG_XEN_BLKDEV_FRONTEND is not set
# CONFIG_BLK_DEV_HD is not set
CONFIG_MISC_DEVICES=y
# CONFIG_IBM_ASM is not set
# CONFIG_PHANTOM is not set
# CONFIG_SGI_IOC4 is not set
# CONFIG_TIFM_CORE is not set
# CONFIG_ENCLOSURE_SERVICES is not set
# CONFIG_HP_ILO is not set
# CONFIG_C2PORT is not set

#
# EEPROM support
#
# CONFIG_EEPROM_93CX6 is not set
CONFIG_HAVE_IDE=y
# CONFIG_IDE is not set

#
# SCSI device support
#
# CONFIG_RAID_ATTRS is not set
CONFIG_SCSI=y
CONFIG_SCSI_DMA=y
# CONFIG_SCSI_TGT is not set
# CONFIG_SCSI_NETLINK is not set
# CONFIG_SCSI_PROC_FS is not set

#
# SCSI support type (disk, tape, CD-ROM)
#
CONFIG_BLK_DEV_SD=y
# CONFIG_CHR_DEV_ST is not set
# CONFIG_CHR_DEV_OSST is not set
CONFIG_BLK_DEV_SR=y
# CONFIG_BLK_DEV_SR_VENDOR is not set
CONFIG_CHR_DEV_SG=y
# CONFIG_CHR_DEV_SCH is not set

#
# Some SCSI devices (e.g. CD jukebox) support multiple LUNs
#
CONFIG_SCSI_MULTI_LUN=y
CONFIG_SCSI_CONSTANTS=y
# CONFIG_SCSI_LOGGING is not set
# CONFIG_SCSI_SCAN_ASYNC is not set
CONFIG_SCSI_WAIT_SCAN=m

#
# SCSI Transports
#
# CONFIG_SCSI_SPI_ATTRS is not set
# CONFIG_SCSI_FC_ATTRS is not set
# CONFIG_SCSI_ISCSI_ATTRS is not set
# CONFIG_SCSI_SAS_LIBSAS is not set
# CONFIG_SCSI_SRP_ATTRS is not set
# CONFIG_SCSI_LOWLEVEL is not set
# CONFIG_SCSI_DH is not set
CONFIG_ATA=y
# CONFIG_ATA_NONSTANDARD is not set
CONFIG_ATA_ACPI=y
# CONFIG_SATA_PMP is not set
# CONFIG_SATA_AHCI is not set
# CONFIG_SATA_SIL24 is not set
CONFIG_ATA_SFF=y
# CONFIG_SATA_SVW is not set
CONFIG_ATA_PIIX=y
# CONFIG_SATA_MV is not set
# CONFIG_SATA_NV is not set
# CONFIG_PDC_ADMA is not set
# CONFIG_SATA_QSTOR is not set
# CONFIG_SATA_PROMISE is not set
# CONFIG_SATA_SX4 is not set
# CONFIG_SATA_SIL is not set
# CONFIG_SATA_SIS is not set
# CONFIG_SATA_ULI is not set
# CONFIG_SATA_VIA is not set
# CONFIG_SATA_VITESSE is not set
# CONFIG_SATA_INIC162X is not set
# CONFIG_PATA_ACPI is not set
# CONFIG_PATA_ALI is not set
# CONFIG_PATA_AMD is not set
# CONFIG_PATA_ARTOP is not set
# CONFIG_PATA_ATIIXP is not set
# CONFIG_PATA_CMD640_PCI is not set
# CONFIG_PATA_CMD64X is not set
# CONFIG_PATA_CS5520 is not set
# CONFIG_PATA_CS5530 is not set
# CONFIG_PATA_CS5535 is not set
# CONFIG_PATA_CS5536 is not set
# CONFIG_PATA_CYPRESS is not set
# CONFIG_PATA_EFAR is not set
# CONFIG_ATA_GENERIC is not set
# CONFIG_PATA_HPT366 is not set
# CONFIG_PATA_HPT37X is not set
# CONFIG_PATA_HPT3X2N is not set
# CONFIG_PATA_HPT3X3 is not set
# CONFIG_PATA_IT821X is not set
# CONFIG_PATA_IT8213 is not set
# CONFIG_PATA_JMICRON is not set
# CONFIG_PATA_TRIFLEX is not set
# CONFIG_PATA_MARVELL is not set
# CONFIG_PATA_MPIIX is not set
# CONFIG_PATA_OLDPIIX is not set
# CONFIG_PATA_NETCELL is not set
# CONFIG_PATA_NINJA32 is not set
# CONFIG_PATA_NS87410 is not set
# CONFIG_PATA_NS87415 is not set
# CONFIG_PATA_OPTI is not set
# CONFIG_PATA_OPTIDMA is not set
# CONFIG_PATA_PDC_OLD is not set
# CONFIG_PATA_RADISYS is not set
# CONFIG_PATA_RZ1000 is not set
# CONFIG_PATA_SC1200 is not set
# CONFIG_PATA_SERVERWORKS is not set
# CONFIG_PATA_PDC2027X is not set
# CONFIG_PATA_SIL680 is not set
# CONFIG_PATA_SIS is not set
# CONFIG_PATA_VIA is not set
# CONFIG_PATA_WINBOND is not set
# CONFIG_PATA_SCH is not set
CONFIG_MD=y
# CONFIG_BLK_DEV_MD is not set
CONFIG_BLK_DEV_DM=y
# CONFIG_DM_DEBUG is not set
CONFIG_DM_CRYPT=y
CONFIG_DM_SNAPSHOT=y
CONFIG_DM_MIRROR=y
# CONFIG_DM_ZERO is not set
# CONFIG_DM_MULTIPATH is not set
# CONFIG_DM_DELAY is not set
# CONFIG_DM_UEVENT is not set
# CONFIG_FUSION is not set

#
# IEEE 1394 (FireWire) support
#

#
# Enable only one of the two stacks, unless you know what you are doing
#
# CONFIG_FIREWIRE is not set
# CONFIG_IEEE1394 is not set
# CONFIG_I2O is not set
# CONFIG_MACINTOSH_DRIVERS is not set
CONFIG_NETDEVICES=y
# CONFIG_DUMMY is not set
# CONFIG_BONDING is not set
# CONFIG_MACVLAN is not set
# CONFIG_EQUALIZER is not set
# CONFIG_TUN is not set
# CONFIG_VETH is not set
# CONFIG_NET_SB1000 is not set
# CONFIG_ARCNET is not set
# CONFIG_PHYLIB is not set
CONFIG_NET_ETHERNET=y
CONFIG_MII=y
# CONFIG_HAPPYMEAL is not set
# CONFIG_SUNGEM is not set
# CONFIG_CASSINI is not set
# CONFIG_NET_VENDOR_3COM is not set
# CONFIG_NET_TULIP is not set
# CONFIG_HP100 is not set
# CONFIG_IBM_NEW_EMAC_ZMII is not set
# CONFIG_IBM_NEW_EMAC_RGMII is not set
# CONFIG_IBM_NEW_EMAC_TAH is not set
# CONFIG_IBM_NEW_EMAC_EMAC4 is not set
# CONFIG_IBM_NEW_EMAC_NO_FLOW_CTRL is not set
# CONFIG_IBM_NEW_EMAC_MAL_CLR_ICINTSTAT is not set
# CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set
# CONFIG_NET_PCI is not set
CONFIG_B44=y
CONFIG_B44_PCI_AUTOSELECT=y
CONFIG_B44_PCICORE_AUTOSELECT=y
CONFIG_B44_PCI=y
# CONFIG_ATL2 is not set
# CONFIG_NETDEV_1000 is not set
# CONFIG_NETDEV_10000 is not set
# CONFIG_TR is not set

#
# Wireless LAN
#
# CONFIG_WLAN_PRE80211 is not set
# CONFIG_WLAN_80211 is not set
# CONFIG_IWLWIFI_LEDS is not set

#
# Enable WiMAX (Networking options) to see the WiMAX drivers
#

#
# USB Network Adapters
#
# CONFIG_USB_CATC is not set
# CONFIG_USB_KAWETH is not set
# CONFIG_USB_PEGASUS is not set
# CONFIG_USB_RTL8150 is not set
# CONFIG_USB_USBNET is not set
# CONFIG_WAN is not set
# CONFIG_XEN_NETDEV_FRONTEND is not set
# CONFIG_FDDI is not set
# CONFIG_HIPPI is not set
# CONFIG_PPP is not set
# CONFIG_SLIP is not set
# CONFIG_NET_FC is not set
CONFIG_NETCONSOLE=y
# CONFIG_NETCONSOLE_DYNAMIC is not set
CONFIG_NETPOLL=y
# CONFIG_NETPOLL_TRAP is not set
CONFIG_NET_POLL_CONTROLLER=y
# CONFIG_ISDN is not set
# CONFIG_PHONE is not set

#
# Input device support
#
CONFIG_INPUT=y
# CONFIG_INPUT_FF_MEMLESS is not set
# CONFIG_INPUT_POLLDEV is not set

#
# Userland interfaces
#
CONFIG_INPUT_MOUSEDEV=y
# CONFIG_INPUT_MOUSEDEV_PSAUX is not set
CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024
CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
# CONFIG_INPUT_JOYDEV is not set
CONFIG_INPUT_EVDEV=y
# CONFIG_INPUT_EVBUG is not set

#
# Input Device Drivers
#
CONFIG_INPUT_KEYBOARD=y
CONFIG_KEYBOARD_ATKBD=y
# CONFIG_KEYBOARD_SUNKBD is not set
# CONFIG_KEYBOARD_LKKBD is not set
# CONFIG_KEYBOARD_XTKBD is not set
# CONFIG_KEYBOARD_NEWTON is not set
# CONFIG_KEYBOARD_STOWAWAY is not set
# CONFIG_INPUT_MOUSE is not set
# CONFIG_INPUT_JOYSTICK is not set
# CONFIG_INPUT_TABLET is not set
# CONFIG_INPUT_TOUCHSCREEN is not set
CONFIG_INPUT_MISC=y
# CONFIG_INPUT_PCSPKR is not set
# CONFIG_INPUT_WISTRON_BTNS is not set
# CONFIG_INPUT_ATLAS_BTNS is not set
# CONFIG_INPUT_ATI_REMOTE is not set
# CONFIG_INPUT_ATI_REMOTE2 is not set
# CONFIG_INPUT_KEYSPAN_REMOTE is not set
# CONFIG_INPUT_POWERMATE is not set
# CONFIG_INPUT_YEALINK is not set
# CONFIG_INPUT_CM109 is not set
CONFIG_INPUT_UINPUT=y

#
# Hardware I/O ports
#
CONFIG_SERIO=y
CONFIG_SERIO_I8042=y
# CONFIG_SERIO_SERPORT is not set
# CONFIG_SERIO_CT82C710 is not set
# CONFIG_SERIO_PCIPS2 is not set
CONFIG_SERIO_LIBPS2=y
# CONFIG_SERIO_RAW is not set
# CONFIG_GAMEPORT is not set

#
# Character devices
#
CONFIG_VT=y
CONFIG_CONSOLE_TRANSLATIONS=y
CONFIG_VT_CONSOLE=y
CONFIG_HW_CONSOLE=y
# CONFIG_VT_HW_CONSOLE_BINDING is not set
# CONFIG_DEVKMEM is not set
# CONFIG_SERIAL_NONSTANDARD is not set
# CONFIG_NOZOMI is not set

#
# Serial drivers
#
# CONFIG_SERIAL_8250 is not set
CONFIG_FIX_EARLYCON_MEM=y

#
# Non-8250 serial port support
#
# CONFIG_SERIAL_JSM is not set
CONFIG_UNIX98_PTYS=y
CONFIG_DEVPTS_MULTIPLE_INSTANCES=y
# CONFIG_LEGACY_PTYS is not set
CONFIG_HVC_DRIVER=y
CONFIG_HVC_IRQ=y
CONFIG_HVC_XEN=y
# CONFIG_IPMI_HANDLER is not set
# CONFIG_HW_RANDOM is not set
# CONFIG_NVRAM is not set
# CONFIG_R3964 is not set
# CONFIG_APPLICOM is not set
# CONFIG_SONYPI is not set
# CONFIG_MWAVE is not set
# CONFIG_PC8736x_GPIO is not set
# CONFIG_NSC_GPIO is not set
# CONFIG_CS5535_GPIO is not set
# CONFIG_RAW_DRIVER is not set
CONFIG_HPET=y
# CONFIG_HPET_MMAP is not set
# CONFIG_HANGCHECK_TIMER is not set
# CONFIG_TCG_TPM is not set
# CONFIG_TELCLOCK is not set
CONFIG_DEVPORT=y
# CONFIG_I2C is not set
# CONFIG_SPI is not set
CONFIG_ARCH_WANT_OPTIONAL_GPIOLIB=y
# CONFIG_GPIOLIB is not set
# CONFIG_W1 is not set
CONFIG_POWER_SUPPLY=y
# CONFIG_POWER_SUPPLY_DEBUG is not set
# CONFIG_PDA_POWER is not set
# CONFIG_BATTERY_DS2760 is not set
# CONFIG_HWMON is not set
CONFIG_THERMAL=y
# CONFIG_WATCHDOG is not set
CONFIG_SSB_POSSIBLE=y

#
# Sonics Silicon Backplane
#
CONFIG_SSB=y
CONFIG_SSB_SPROM=y
CONFIG_SSB_PCIHOST_POSSIBLE=y
CONFIG_SSB_PCIHOST=y
# CONFIG_SSB_B43_PCI_BRIDGE is not set
# CONFIG_SSB_DEBUG is not set
CONFIG_SSB_DRIVER_PCICORE_POSSIBLE=y
CONFIG_SSB_DRIVER_PCICORE=y

#
# Multifunction device drivers
#
# CONFIG_MFD_CORE is not set
# CONFIG_MFD_SM501 is not set
# CONFIG_HTC_PASIC3 is not set
# CONFIG_MFD_TMIO is not set
# CONFIG_REGULATOR is not set

#
# Multimedia devices
#

#
# Multimedia core support
#
# CONFIG_VIDEO_DEV is not set
# CONFIG_DVB_CORE is not set
# CONFIG_VIDEO_MEDIA is not set

#
# Multimedia drivers
#
# CONFIG_DAB is not set

#
# Graphics support
#
# CONFIG_AGP is not set
# CONFIG_DRM is not set
# CONFIG_VGASTATE is not set
# CONFIG_VIDEO_OUTPUT_CONTROL is not set
# CONFIG_FB is not set
# CONFIG_BACKLIGHT_LCD_SUPPORT is not set

#
# Display device support
#
# CONFIG_DISPLAY_SUPPORT is not set

#
# Console display driver support
#
CONFIG_VGA_CONSOLE=y
# CONFIG_VGACON_SOFT_SCROLLBACK is not set
CONFIG_DUMMY_CONSOLE=y
# CONFIG_SOUND is not set
# CONFIG_HID_SUPPORT is not set
CONFIG_USB_SUPPORT=y
CONFIG_USB_ARCH_HAS_HCD=y
CONFIG_USB_ARCH_HAS_OHCI=y
CONFIG_USB_ARCH_HAS_EHCI=y
CONFIG_USB=m
# CONFIG_USB_DEBUG is not set
# CONFIG_USB_ANNOUNCE_NEW_DEVICES is not set

#
# Miscellaneous USB options
#
# CONFIG_USB_DEVICEFS is not set
# CONFIG_USB_DEVICE_CLASS is not set
# CONFIG_USB_DYNAMIC_MINORS is not set
# CONFIG_USB_SUSPEND is not set
# CONFIG_USB_OTG is not set
CONFIG_USB_MON=m
# CONFIG_USB_WUSB is not set
# CONFIG_USB_WUSB_CBAF is not set

#
# USB Host Controller Drivers
#
# CONFIG_USB_C67X00_HCD is not set
CONFIG_USB_EHCI_HCD=m
CONFIG_USB_EHCI_ROOT_HUB_TT=y
# CONFIG_USB_EHCI_TT_NEWSCHED is not set
# CONFIG_USB_OXU210HP_HCD is not set
# CONFIG_USB_ISP116X_HCD is not set
# CONFIG_USB_ISP1760_HCD is not set
CONFIG_USB_OHCI_HCD=m
# CONFIG_USB_OHCI_HCD_SSB is not set
# CONFIG_USB_OHCI_BIG_ENDIAN_DESC is not set
# CONFIG_USB_OHCI_BIG_ENDIAN_MMIO is not set
CONFIG_USB_OHCI_LITTLE_ENDIAN=y
CONFIG_USB_UHCI_HCD=m
# CONFIG_USB_SL811_HCD is not set
# CONFIG_USB_R8A66597_HCD is not set
# CONFIG_USB_HWA_HCD is not set

#
# Enable Host or Gadget support to see Inventra options
#

#
# USB Device Class drivers
#
CONFIG_USB_ACM=m
# CONFIG_USB_PRINTER is not set
# CONFIG_USB_WDM is not set
# CONFIG_USB_TMC is not set

#
# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may also be needed;
#

#
# see USB_STORAGE Help for more information
#
CONFIG_USB_STORAGE=m
# CONFIG_USB_STORAGE_DEBUG is not set
# CONFIG_USB_STORAGE_DATAFAB is not set
# CONFIG_USB_STORAGE_FREECOM is not set
# CONFIG_USB_STORAGE_ISD200 is not set
# CONFIG_USB_STORAGE_USBAT is not set
# CONFIG_USB_STORAGE_SDDR09 is not set
# CONFIG_USB_STORAGE_SDDR55 is not set
# CONFIG_USB_STORAGE_JUMPSHOT is not set
# CONFIG_USB_STORAGE_ALAUDA is not set
# CONFIG_USB_STORAGE_ONETOUCH is not set
# CONFIG_USB_STORAGE_KARMA is not set
# CONFIG_USB_STORAGE_CYPRESS_ATACB is not set
# CONFIG_USB_LIBUSUAL is not set

#
# USB Imaging devices
#
# CONFIG_USB_MDC800 is not set
# CONFIG_USB_MICROTEK is not set

#
# USB port drivers
#
# CONFIG_USB_SERIAL is not set

#
# USB Miscellaneous drivers
#
# CONFIG_USB_EMI62 is not set
# CONFIG_USB_EMI26 is not set
# CONFIG_USB_ADUTUX is not set
# CONFIG_USB_SEVSEG is not set
# CONFIG_USB_RIO500 is not set
# CONFIG_USB_LEGOTOWER is not set
# CONFIG_USB_LCD is not set
# CONFIG_USB_BERRY_CHARGE is not set
# CONFIG_USB_LED is not set
# CONFIG_USB_CYPRESS_CY7C63 is not set
# CONFIG_USB_CYTHERM is not set
# CONFIG_USB_PHIDGET is not set
# CONFIG_USB_IDMOUSE is not set
# CONFIG_USB_FTDI_ELAN is not set
# CONFIG_USB_APPLEDISPLAY is not set
# CONFIG_USB_SISUSBVGA is not set
# CONFIG_USB_LD is not set
# CONFIG_USB_TRANCEVIBRATOR is not set
# CONFIG_USB_IOWARRIOR is not set
# CONFIG_USB_ISIGHTFW is not set
# CONFIG_USB_VST is not set

#
# OTG and related infrastructure
#
# CONFIG_UWB is not set
# CONFIG_MMC is not set
# CONFIG_MEMSTICK is not set
# CONFIG_NEW_LEDS is not set
# CONFIG_ACCESSIBILITY is not set
# CONFIG_EDAC is not set
CONFIG_RTC_LIB=y
CONFIG_RTC_CLASS=y
CONFIG_RTC_HCTOSYS=y
CONFIG_RTC_HCTOSYS_DEVICE="rtc0"
# CONFIG_RTC_DEBUG is not set

#
# RTC interfaces
#
CONFIG_RTC_INTF_SYSFS=y
CONFIG_RTC_INTF_PROC=y
CONFIG_RTC_INTF_DEV=y
# CONFIG_RTC_INTF_DEV_UIE_EMUL is not set
# CONFIG_RTC_DRV_TEST is not set

#
# SPI RTC drivers
#

#
# Platform RTC drivers
#
CONFIG_RTC_DRV_CMOS=y
# CONFIG_RTC_DRV_DS1286 is not set
# CONFIG_RTC_DRV_DS1511 is not set
# CONFIG_RTC_DRV_DS1553 is not set
# CONFIG_RTC_DRV_DS1742 is not set
# CONFIG_RTC_DRV_STK17TA8 is not set
# CONFIG_RTC_DRV_M48T86 is not set
# CONFIG_RTC_DRV_M48T35 is not set
# CONFIG_RTC_DRV_M48T59 is not set
# CONFIG_RTC_DRV_BQ4802 is not set
# CONFIG_RTC_DRV_V3020 is not set

#
# on-CPU RTC drivers
#
# CONFIG_UIO is not set
CONFIG_XEN_BALLOON=y
CONFIG_XEN_SCRUB_PAGES=y
CONFIG_XEN_DEV_EVTCHN=y
CONFIG_XEN_BACKEND=y
# CONFIG_XEN_BLKDEV_BACKEND is not set
# CONFIG_XEN_NETDEV_BACKEND is not set
CONFIG_XENFS=y
CONFIG_XEN_COMPAT_XENFS=y
CONFIG_XEN_S3=y
CONFIG_XEN_GNTDEV=y
# CONFIG_STAGING is not set
# CONFIG_X86_PLATFORM_DEVICES is not set

#
# Firmware Drivers
#
# CONFIG_EDD is not set
CONFIG_FIRMWARE_MEMMAP=y
# CONFIG_DELL_RBU is not set
# CONFIG_DCDBAS is not set
# CONFIG_DMIID is not set
# CONFIG_ISCSI_IBFT_FIND is not set

#
# File systems
#
CONFIG_EXT2_FS=y
# CONFIG_EXT2_FS_XATTR is not set
# CONFIG_EXT2_FS_XIP is not set
CONFIG_EXT3_FS=y
# CONFIG_EXT3_FS_XATTR is not set
# CONFIG_EXT4_FS is not set
CONFIG_JBD=y
CONFIG_REISERFS_FS=y
# CONFIG_REISERFS_CHECK is not set
# CONFIG_REISERFS_PROC_INFO is not set
# CONFIG_REISERFS_FS_XATTR is not set
# CONFIG_JFS_FS is not set
# CONFIG_FS_POSIX_ACL is not set
CONFIG_FILE_LOCKING=y
# CONFIG_XFS_FS is not set
# CONFIG_OCFS2_FS is not set
# CONFIG_BTRFS_FS is not set
CONFIG_DNOTIFY=y
CONFIG_INOTIFY=y
CONFIG_INOTIFY_USER=y
CONFIG_QUOTA=y
CONFIG_QUOTA_NETLINK_INTERFACE=y
# CONFIG_PRINT_QUOTA_WARNING is not set
CONFIG_QUOTA_TREE=y
# CONFIG_QFMT_V1 is not set
CONFIG_QFMT_V2=y
CONFIG_QUOTACTL=y
# CONFIG_AUTOFS_FS is not set
# CONFIG_AUTOFS4_FS is not set
# CONFIG_FUSE_FS is not set

#
# CD-ROM/DVD Filesystems
#
# CONFIG_ISO9660_FS is not set
# CONFIG_UDF_FS is not set

#
# DOS/FAT/NT Filesystems
#
# CONFIG_MSDOS_FS is not set
# CONFIG_VFAT_FS is not set
# CONFIG_NTFS_FS is not set

#
# Pseudo filesystems
#
CONFIG_PROC_FS=y
# CONFIG_PROC_KCORE is not set
CONFIG_PROC_SYSCTL=y
CONFIG_PROC_PAGE_MONITOR=y
CONFIG_SYSFS=y
CONFIG_TMPFS=y
# CONFIG_TMPFS_POSIX_ACL is not set
# CONFIG_HUGETLBFS is not set
# CONFIG_HUGETLB_PAGE is not set
CONFIG_CONFIGFS_FS=y
CONFIG_MISC_FILESYSTEMS=y
# CONFIG_ADFS_FS is not set
# CONFIG_AFFS_FS is not set
# CONFIG_HFS_FS is not set
# CONFIG_HFSPLUS_FS is not set
# CONFIG_BEFS_FS is not set
# CONFIG_BFS_FS is not set
# CONFIG_EFS_FS is not set
# CONFIG_CRAMFS is not set
# CONFIG_SQUASHFS is not set
# CONFIG_VXFS_FS is not set
# CONFIG_MINIX_FS is not set
# CONFIG_OMFS_FS is not set
# CONFIG_HPFS_FS is not set
# CONFIG_QNX4FS_FS is not set
# CONFIG_ROMFS_FS is not set
# CONFIG_SYSV_FS is not set
# CONFIG_UFS_FS is not set
# CONFIG_NETWORK_FILESYSTEMS is not set

#
# Partition Types
#
# CONFIG_PARTITION_ADVANCED is not set
CONFIG_MSDOS_PARTITION=y
# CONFIG_NLS is not set
# CONFIG_DLM is not set

#
# Kernel hacking
#
CONFIG_TRACE_IRQFLAGS_SUPPORT=y
CONFIG_PRINTK_TIME=y
CONFIG_ALLOW_WARNINGS=y
CONFIG_ENABLE_WARN_DEPRECATED=y
# CONFIG_ENABLE_MUST_CHECK is not set
CONFIG_FRAME_WARN=1024
CONFIG_MAGIC_SYSRQ=y
# CONFIG_UNUSED_SYMBOLS is not set
# CONFIG_DEBUG_FS is not set
# CONFIG_HEADERS_CHECK is not set
CONFIG_DEBUG_SECTION_MISMATCH=y
CONFIG_DEBUG_KERNEL=y
# CONFIG_DEBUG_SHIRQ is not set
CONFIG_DETECT_SOFTLOCKUP=y
# CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC is not set
CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC_VALUE=0
CONFIG_DETECT_HUNG_TASK=y
# CONFIG_BOOTPARAM_HUNG_TASK_PANIC is not set
CONFIG_BOOTPARAM_HUNG_TASK_PANIC_VALUE=0
CONFIG_SCHED_DEBUG=y
# CONFIG_SCHEDSTATS is not set
# CONFIG_TIMER_STATS is not set
# CONFIG_DEBUG_OBJECTS is not set
# CONFIG_DEBUG_SLAB is not set
# CONFIG_DEBUG_RT_MUTEXES is not set
# CONFIG_RT_MUTEX_TESTER is not set
# CONFIG_DEBUG_SPINLOCK is not set
# CONFIG_DEBUG_MUTEXES is not set
# CONFIG_DEBUG_LOCK_ALLOC is not set
# CONFIG_PROVE_LOCKING is not set
# CONFIG_LOCK_STAT is not set
# CONFIG_DEBUG_SPINLOCK_SLEEP is not set
# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
# CONFIG_DEBUG_KOBJECT is not set
# CONFIG_DEBUG_HIGHMEM is not set
CONFIG_DEBUG_BUGVERBOSE=y
# CONFIG_DEBUG_INFO is not set
# CONFIG_DEBUG_VM is not set
# CONFIG_DEBUG_VIRTUAL is not set
# CONFIG_DEBUG_WRITECOUNT is not set
CONFIG_DEBUG_MEMORY_INIT=y
# CONFIG_DEBUG_LIST is not set
# CONFIG_DEBUG_SG is not set
# CONFIG_DEBUG_NOTIFIERS is not set
CONFIG_ARCH_WANT_FRAME_POINTERS=y
CONFIG_FRAME_POINTER=y
# CONFIG_BOOT_PRINTK_DELAY is not set
# CONFIG_RCU_TORTURE_TEST is not set
# CONFIG_RCU_CPU_STALL_DETECTOR is not set
# CONFIG_BACKTRACE_SELF_TEST is not set
# CONFIG_DEBUG_BLOCK_EXT_DEVT is not set
# CONFIG_FAULT_INJECTION is not set
# CONFIG_LATENCYTOP is not set
# CONFIG_SYSCTL_SYSCALL_CHECK is not set
CONFIG_USER_STACKTRACE_SUPPORT=y
CONFIG_HAVE_FUNCTION_TRACER=y
CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y
CONFIG_HAVE_FUNCTION_TRACE_MCOUNT_TEST=y
CONFIG_HAVE_DYNAMIC_FTRACE=y
CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y

#
# Tracers
#
# CONFIG_FUNCTION_TRACER is not set
# CONFIG_IRQSOFF_TRACER is not set
# CONFIG_SYSPROF_TRACER is not set
# CONFIG_SCHED_TRACER is not set
# CONFIG_CONTEXT_SWITCH_TRACER is not set
# CONFIG_EVENT_TRACER is not set
# CONFIG_BOOT_TRACER is not set
# CONFIG_TRACE_BRANCH_PROFILING is not set
# CONFIG_POWER_TRACER is not set
# CONFIG_STACK_TRACER is not set
# CONFIG_KMEMTRACE is not set
# CONFIG_WORKQUEUE_TRACER is not set
# CONFIG_BLK_DEV_IO_TRACE is not set
# CONFIG_MMIOTRACE is not set
# CONFIG_PROVIDE_OHCI1394_DMA_INIT is not set
# CONFIG_DYNAMIC_PRINTK_DEBUG is not set
# CONFIG_SAMPLES is not set
CONFIG_HAVE_ARCH_KGDB=y
# CONFIG_KGDB is not set
CONFIG_HAVE_ARCH_KMEMCHECK=y
# CONFIG_KMEMCHECK is not set
# CONFIG_STRICT_DEVMEM is not set
CONFIG_X86_VERBOSE_BOOTUP=y
CONFIG_EARLY_PRINTK=y
# CONFIG_EARLY_PRINTK_DBGP is not set
# CONFIG_DEBUG_STACKOVERFLOW is not set
# CONFIG_DEBUG_STACK_USAGE is not set
# CONFIG_DEBUG_PAGEALLOC is not set
# CONFIG_DEBUG_PER_CPU_MAPS is not set
# CONFIG_X86_PTDUMP is not set
CONFIG_DEBUG_RODATA=y
CONFIG_DEBUG_RODATA_TEST=y
# CONFIG_DEBUG_NX_TEST is not set
# CONFIG_4KSTACKS is not set
CONFIG_DOUBLEFAULT=y
CONFIG_HAVE_MMIOTRACE_SUPPORT=y
CONFIG_IO_DELAY_TYPE_0X80=0
CONFIG_IO_DELAY_TYPE_0XED=1
CONFIG_IO_DELAY_TYPE_UDELAY=2
CONFIG_IO_DELAY_TYPE_NONE=3
CONFIG_IO_DELAY_0X80=y
# CONFIG_IO_DELAY_0XED is not set
# CONFIG_IO_DELAY_UDELAY is not set
# CONFIG_IO_DELAY_NONE is not set
CONFIG_DEFAULT_IO_DELAY_TYPE=0
# CONFIG_CPA_DEBUG is not set
# CONFIG_OPTIMIZE_INLINING is not set

#
# Security options
#
# CONFIG_KEYS is not set
# CONFIG_SECURITY is not set
# CONFIG_SECURITYFS is not set
# CONFIG_SECURITY_FILE_CAPABILITIES is not set
CONFIG_CRYPTO=y

#
# Crypto core or helper
#
CONFIG_CRYPTO_FIPS=y
CONFIG_CRYPTO_ALGAPI=y
CONFIG_CRYPTO_ALGAPI2=y
CONFIG_CRYPTO_AEAD=y
CONFIG_CRYPTO_AEAD2=y
CONFIG_CRYPTO_BLKCIPHER=y
CONFIG_CRYPTO_BLKCIPHER2=y
CONFIG_CRYPTO_HASH=y
CONFIG_CRYPTO_HASH2=y
CONFIG_CRYPTO_RNG=y
CONFIG_CRYPTO_RNG2=y
CONFIG_CRYPTO_MANAGER=y
CONFIG_CRYPTO_MANAGER2=y
# CONFIG_CRYPTO_GF128MUL is not set
# CONFIG_CRYPTO_NULL is not set
CONFIG_CRYPTO_CRYPTD=y
# CONFIG_CRYPTO_AUTHENC is not set
# CONFIG_CRYPTO_TEST is not set

#
# Authenticated Encryption with Associated Data
#
# CONFIG_CRYPTO_CCM is not set
# CONFIG_CRYPTO_GCM is not set
CONFIG_CRYPTO_SEQIV=y

#
# Block modes
#
CONFIG_CRYPTO_CBC=y
# CONFIG_CRYPTO_CTR is not set
# CONFIG_CRYPTO_CTS is not set
# CONFIG_CRYPTO_ECB is not set
# CONFIG_CRYPTO_LRW is not set
# CONFIG_CRYPTO_PCBC is not set
# CONFIG_CRYPTO_XTS is not set

#
# Hash modes
#
# CONFIG_CRYPTO_HMAC is not set
# CONFIG_CRYPTO_XCBC is not set

#
# Digest
#
# CONFIG_CRYPTO_CRC32C is not set
# CONFIG_CRYPTO_CRC32C_INTEL is not set
# CONFIG_CRYPTO_MD4 is not set
# CONFIG_CRYPTO_MD5 is not set
# CONFIG_CRYPTO_MICHAEL_MIC is not set
# CONFIG_CRYPTO_RMD128 is not set
# CONFIG_CRYPTO_RMD160 is not set
CONFIG_CRYPTO_RMD256=y
# CONFIG_CRYPTO_RMD320 is not set
# CONFIG_CRYPTO_SHA1 is not set
CONFIG_CRYPTO_SHA256=y
# CONFIG_CRYPTO_SHA512 is not set
# CONFIG_CRYPTO_TGR192 is not set
# CONFIG_CRYPTO_WP512 is not set

#
# Ciphers
#
CONFIG_CRYPTO_AES=y
CONFIG_CRYPTO_AES_586=y
# CONFIG_CRYPTO_ANUBIS is not set
# CONFIG_CRYPTO_ARC4 is not set
# CONFIG_CRYPTO_BLOWFISH is not set
# CONFIG_CRYPTO_CAMELLIA is not set
# CONFIG_CRYPTO_CAST5 is not set
# CONFIG_CRYPTO_CAST6 is not set
# CONFIG_CRYPTO_DES is not set
# CONFIG_CRYPTO_FCRYPT is not set
# CONFIG_CRYPTO_KHAZAD is not set
# CONFIG_CRYPTO_SALSA20 is not set
# CONFIG_CRYPTO_SALSA20_586 is not set
# CONFIG_CRYPTO_SEED is not set
CONFIG_CRYPTO_SERPENT=y
# CONFIG_CRYPTO_TEA is not set
# CONFIG_CRYPTO_TWOFISH is not set
CONFIG_CRYPTO_TWOFISH_COMMON=y
CONFIG_CRYPTO_TWOFISH_586=y

#
# Compression
#
# CONFIG_CRYPTO_DEFLATE is not set
# CONFIG_CRYPTO_LZO is not set

#
# Random Number Generation
#
CONFIG_CRYPTO_ANSI_CPRNG=y
CONFIG_CRYPTO_HW=y
# CONFIG_CRYPTO_DEV_PADLOCK is not set
# CONFIG_CRYPTO_DEV_GEODE is not set
# CONFIG_CRYPTO_DEV_HIFN_795X is not set
CONFIG_HAVE_KVM=y
# CONFIG_VIRTUALIZATION is not set

#
# Library routines
#
CONFIG_GENERIC_FIND_FIRST_BIT=y
CONFIG_GENERIC_FIND_NEXT_BIT=y
CONFIG_GENERIC_FIND_LAST_BIT=y
# CONFIG_CRC_CCITT is not set
# CONFIG_CRC16 is not set
# CONFIG_CRC_T10DIF is not set
# CONFIG_CRC_ITU_T is not set
# CONFIG_CRC32 is not set
# CONFIG_CRC7 is not set
# CONFIG_LIBCRC32C is not set
CONFIG_ZLIB_INFLATE=y
CONFIG_DECOMPRESS_GZIP=y
CONFIG_HAS_IOMEM=y
CONFIG_HAS_IOPORT=y
CONFIG_HAS_DMA=y

[-- Attachment #3: Type: text/plain, Size: 138 bytes --]

_______________________________________________
Xen-devel mailing list
Xen-devel@lists.xensource.com
http://lists.xensource.com/xen-devel

^ permalink raw reply	[flat|nested] 6+ messages in thread
end of thread, other threads:[~2009-03-06 22:49 UTC | newest]

Thread overview: 6+ messages (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
2009-03-06  0:34 pv_ops dom0 clock only runs under load Milan Holzäpfel
2009-03-06  5:41 ` Jeremy Fitzhardinge
2009-03-06 20:46   ` Milan Holzäpfel
2009-03-06 21:27     ` Milan Holzäpfel
2009-03-06 21:56       ` Jeremy Fitzhardinge
2009-03-06 22:49         ` Milan Holzäpfel

This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.