* Could not run HVM domain on the latest xen-unstable.hg and Barcelona. @ 2009-03-10 8:16 Yoshisato YANAGISAWA 2009-03-10 23:18 ` Could not run HVM domain on the latest xen-unstable.hgand Barcelona Huang2, Wei 0 siblings, 1 reply; 10+ messages in thread From: Yoshisato YANAGISAWA @ 2009-03-10 8:16 UTC (permalink / raw) To: xen-devel Hi all, Does anybody have tested the latest xen-unstable.hg with an HVM domain on AMD Barcelona Opteron? I cloned xen-unstable.hg today (2009-03-10 JST), made config file for booting an OS image from CD-ROM, and tried to run an HVM domain. However, it stops running while booting. According to the vnc, the virtual machine displayed following message: (snip) | Bochs BIOS - build: 06/23/99 | $Revision: 1.221 $ $Date: 2008/12/07 17:32:29 $ | Options: apmbios pcibios eltorito PMM | | ata1 master: QEMU DVD-ROM ATAPI-4 CD-Rom/DVD-Rom | | gPXE (http://etherboot.org) - 00:04.0 C900 PCI2.10 INT19 PMM0020_ According to the serial console, I also saw following message: (XEN) HVM1: HVM Loader (XEN) HVM1: Detected Xen v3.4-unstable (XEN) HVM1: CPU speed is 2300 MHz (XEN) irq.c:235: Dom1 PCI link 0 changed 0 -> 5 (XEN) HVM1: PCI-ISA link 0 routed to IRQ5 (XEN) irq.c:235: Dom1 PCI link 1 changed 0 -> 10 (XEN) HVM1: PCI-ISA link 1 routed to IRQ10 (XEN) irq.c:235: Dom1 PCI link 2 changed 0 -> 11 (XEN) HVM1: PCI-ISA link 2 routed to IRQ11 (XEN) irq.c:235: Dom1 PCI link 3 changed 0 -> 5 (XEN) HVM1: PCI-ISA link 3 routed to IRQ5 (XEN) HVM1: pci dev 01:3 INTA->IRQ10 (XEN) HVM1: pci dev 03:0 INTA->IRQ5 (XEN) HVM1: pci dev 04:0 INTA->IRQ5 (XEN) HVM1: pci dev 02:0 bar 10 size 02000000: f0000008 (XEN) HVM1: pci dev 03:0 bar 14 size 01000000: f2000008 (XEN) HVM1: pci dev 02:0 bar 14 size 00001000: f3000000 (XEN) HVM1: pci dev 03:0 bar 10 size 00000100: 0000c001 (XEN) HVM1: pci dev 04:0 bar 10 size 00000100: 0000c101 (XEN) HVM1: pci dev 04:0 bar 14 size 00000100: f3001000 (XEN) HVM1: pci dev 01:1 bar 20 size 00000010: 0000c201 (XEN) HVM1: Multiprocessor initialisation: (XEN) HVM1: - CPU0 ... 48-bit phys ... fixed MTRRs ... var MTRRs [2/8] ... don. (XEN) HVM1: Testing HVM environment: (XEN) HVM1: - REP INSB across page boundaries ... passed (XEN) HVM1: Passed 1/1 tests (XEN) HVM1: Writing SMBIOS tables ... (XEN) HVM1: Loading ROMBIOS ... (XEN) HVM1: 9628 bytes of ROMBIOS high-memory extensions: (XEN) HVM1: Relocating to 0xfc000000-0xfc00259c ... done (XEN) HVM1: Creating MP tables ... (XEN) HVM1: Loading Cirrus VGABIOS ... (XEN) HVM1: Loading PCI Option ROM ... (XEN) HVM1: - Manufacturer: http://etherboot.org (XEN) HVM1: - Product name: gPXE (XEN) HVM1: Loading ACPI ... (XEN) HVM1: - Lo data: 000ea020-000ea04f (XEN) HVM1: - Hi data: fc002800-fc0042bf (XEN) HVM1: vm86 TSS at fc004400 (XEN) HVM1: BIOS map: (XEN) HVM1: c0000-c8fff: VGA BIOS (XEN) HVM1: c9000-d57ff: Etherboot ROM (XEN) HVM1: eb000-eb14c: SMBIOS tables (XEN) HVM1: f0000-fffff: Main BIOS (XEN) HVM1: Invoking ROMBIOS ... (XEN) HVM1: $Revision: 1.221 $ $Date: 2008/12/07 17:32:29 $ (XEN) stdvga.c:147:d1 entering stdvga and caching modes (XEN) HVM1: VGABios $Id: vgabios.c,v 1.67 2008/01/27 09:44:12 vruppert Exp $ (XEN) HVM1: Bochs BIOS - build: 06/23/99 (XEN) HVM1: $Revision: 1.221 $ $Date: 2008/12/07 17:32:29 $ (XEN) HVM1: Options: apmbios pcibios eltorito PMM (XEN) HVM1: (XEN) HVM1: ata1 master: QEMU DVD-ROM ATAPI-4 CD-Rom/DVD-Rom (XEN) HVM1: IDE time out (XEN) HVM1: No suspicious log is found in /var/log/xen/xend.log. I came across this problem with AMD Quad-Core Opteron(tm) 2356 on Dell PowerEdge R805. However, this kind of problem did not happened on the another machine I use (Intel Xeon 5130). Does anybody know how to fix this problem or how to analyze it? Thank you in advance, -- Yoshisato YANAGISAWA, Ph.D. Open Source Software Computing Project NTT Cyber Space Laboratories NIPPON TELEGRAPH AND TELEPHONE CORPORATION 1-1 Hikarinooka, Yokosuka-Shi, Kanagawa 239-0847, Japan ^ permalink raw reply [flat|nested] 10+ messages in thread
* RE: Could not run HVM domain on the latest xen-unstable.hgand Barcelona. 2009-03-10 8:16 Could not run HVM domain on the latest xen-unstable.hg and Barcelona Yoshisato YANAGISAWA @ 2009-03-10 23:18 ` Huang2, Wei 2009-03-11 1:40 ` Yoshisato YANAGISAWA 2009-03-11 3:41 ` Kouya Shimura 0 siblings, 2 replies; 10+ messages in thread From: Huang2, Wei @ 2009-03-10 23:18 UTC (permalink / raw) To: Yoshisato YANAGISAWA, xen-devel; +Cc: takebe_akio, kouya We saw this problem recently. I traced it down to PMM patch submitted by Kouya and Akio (changeset 19077). To fix this problem temporarily, add mode=e1000 to your vif option. vif = [ 'type=ioemu, bridge=xenbr0, model=e1000'] Regards, -Wei -----Original Message----- From: xen-devel-bounces@lists.xensource.com [mailto:xen-devel-bounces@lists.xensource.com] On Behalf Of Yoshisato YANAGISAWA Sent: Tuesday, March 10, 2009 3:17 AM To: xen-devel Subject: [Xen-devel] Could not run HVM domain on the latest xen-unstable.hgand Barcelona. Hi all, Does anybody have tested the latest xen-unstable.hg with an HVM domain on AMD Barcelona Opteron? I cloned xen-unstable.hg today (2009-03-10 JST), made config file for booting an OS image from CD-ROM, and tried to run an HVM domain. However, it stops running while booting. According to the vnc, the virtual machine displayed following message: (snip) | Bochs BIOS - build: 06/23/99 | $Revision: 1.221 $ $Date: 2008/12/07 17:32:29 $ | Options: apmbios pcibios eltorito PMM | | ata1 master: QEMU DVD-ROM ATAPI-4 CD-Rom/DVD-Rom | | gPXE (http://etherboot.org) - 00:04.0 C900 PCI2.10 INT19 PMM0020_ According to the serial console, I also saw following message: (XEN) HVM1: HVM Loader (XEN) HVM1: Detected Xen v3.4-unstable (XEN) HVM1: CPU speed is 2300 MHz (XEN) irq.c:235: Dom1 PCI link 0 changed 0 -> 5 (XEN) HVM1: PCI-ISA link 0 routed to IRQ5 (XEN) irq.c:235: Dom1 PCI link 1 changed 0 -> 10 (XEN) HVM1: PCI-ISA link 1 routed to IRQ10 (XEN) irq.c:235: Dom1 PCI link 2 changed 0 -> 11 (XEN) HVM1: PCI-ISA link 2 routed to IRQ11 (XEN) irq.c:235: Dom1 PCI link 3 changed 0 -> 5 (XEN) HVM1: PCI-ISA link 3 routed to IRQ5 (XEN) HVM1: pci dev 01:3 INTA->IRQ10 (XEN) HVM1: pci dev 03:0 INTA->IRQ5 (XEN) HVM1: pci dev 04:0 INTA->IRQ5 (XEN) HVM1: pci dev 02:0 bar 10 size 02000000: f0000008 (XEN) HVM1: pci dev 03:0 bar 14 size 01000000: f2000008 (XEN) HVM1: pci dev 02:0 bar 14 size 00001000: f3000000 (XEN) HVM1: pci dev 03:0 bar 10 size 00000100: 0000c001 (XEN) HVM1: pci dev 04:0 bar 10 size 00000100: 0000c101 (XEN) HVM1: pci dev 04:0 bar 14 size 00000100: f3001000 (XEN) HVM1: pci dev 01:1 bar 20 size 00000010: 0000c201 (XEN) HVM1: Multiprocessor initialisation: (XEN) HVM1: - CPU0 ... 48-bit phys ... fixed MTRRs ... var MTRRs [2/8] ... don. (XEN) HVM1: Testing HVM environment: (XEN) HVM1: - REP INSB across page boundaries ... passed (XEN) HVM1: Passed 1/1 tests (XEN) HVM1: Writing SMBIOS tables ... (XEN) HVM1: Loading ROMBIOS ... (XEN) HVM1: 9628 bytes of ROMBIOS high-memory extensions: (XEN) HVM1: Relocating to 0xfc000000-0xfc00259c ... done (XEN) HVM1: Creating MP tables ... (XEN) HVM1: Loading Cirrus VGABIOS ... (XEN) HVM1: Loading PCI Option ROM ... (XEN) HVM1: - Manufacturer: http://etherboot.org (XEN) HVM1: - Product name: gPXE (XEN) HVM1: Loading ACPI ... (XEN) HVM1: - Lo data: 000ea020-000ea04f (XEN) HVM1: - Hi data: fc002800-fc0042bf (XEN) HVM1: vm86 TSS at fc004400 (XEN) HVM1: BIOS map: (XEN) HVM1: c0000-c8fff: VGA BIOS (XEN) HVM1: c9000-d57ff: Etherboot ROM (XEN) HVM1: eb000-eb14c: SMBIOS tables (XEN) HVM1: f0000-fffff: Main BIOS (XEN) HVM1: Invoking ROMBIOS ... (XEN) HVM1: $Revision: 1.221 $ $Date: 2008/12/07 17:32:29 $ (XEN) stdvga.c:147:d1 entering stdvga and caching modes (XEN) HVM1: VGABios $Id: vgabios.c,v 1.67 2008/01/27 09:44:12 vruppert Exp $ (XEN) HVM1: Bochs BIOS - build: 06/23/99 (XEN) HVM1: $Revision: 1.221 $ $Date: 2008/12/07 17:32:29 $ (XEN) HVM1: Options: apmbios pcibios eltorito PMM (XEN) HVM1: (XEN) HVM1: ata1 master: QEMU DVD-ROM ATAPI-4 CD-Rom/DVD-Rom (XEN) HVM1: IDE time out (XEN) HVM1: No suspicious log is found in /var/log/xen/xend.log. I came across this problem with AMD Quad-Core Opteron(tm) 2356 on Dell PowerEdge R805. However, this kind of problem did not happened on the another machine I use (Intel Xeon 5130). Does anybody know how to fix this problem or how to analyze it? Thank you in advance, -- Yoshisato YANAGISAWA, Ph.D. Open Source Software Computing Project NTT Cyber Space Laboratories NIPPON TELEGRAPH AND TELEPHONE CORPORATION 1-1 Hikarinooka, Yokosuka-Shi, Kanagawa 239-0847, Japan _______________________________________________ Xen-devel mailing list Xen-devel@lists.xensource.com http://lists.xensource.com/xen-devel ^ permalink raw reply [flat|nested] 10+ messages in thread
* Re: Could not run HVM domain on the latest xen-unstable.hgand Barcelona. 2009-03-10 23:18 ` Could not run HVM domain on the latest xen-unstable.hgand Barcelona Huang2, Wei @ 2009-03-11 1:40 ` Yoshisato YANAGISAWA 2009-03-11 3:41 ` Kouya Shimura 1 sibling, 0 replies; 10+ messages in thread From: Yoshisato YANAGISAWA @ 2009-03-11 1:40 UTC (permalink / raw) To: Huang2, Wei; +Cc: xen-devel, takebe_akio, kouya Thank you, Wei. I configured the vif as you told, and could boot the HVM domain. Regards, On 2009/03/11 8:18, Huang2, Wei wrote: > We saw this problem recently. I traced it down to PMM patch submitted by > Kouya and Akio (changeset 19077). > > To fix this problem temporarily, add mode=e1000 to your vif option. > vif = [ 'type=ioemu, bridge=xenbr0, model=e1000'] > > > Regards, > > -Wei > > -----Original Message----- > From: xen-devel-bounces@lists.xensource.com > [mailto:xen-devel-bounces@lists.xensource.com] On Behalf Of Yoshisato > YANAGISAWA > Sent: Tuesday, March 10, 2009 3:17 AM > To: xen-devel > Subject: [Xen-devel] Could not run HVM domain on the latest > xen-unstable.hgand Barcelona. > > > Hi all, > > Does anybody have tested the latest xen-unstable.hg with an HVM domain > on AMD Barcelona Opteron? > I cloned xen-unstable.hg today (2009-03-10 JST), made config file for > booting an OS image from CD-ROM, and tried to run an HVM domain. > However, it stops running while booting. > > According to the vnc, the virtual machine displayed following message: > (snip) > | Bochs BIOS - build: 06/23/99 > | $Revision: 1.221 $ $Date: 2008/12/07 17:32:29 $ > | Options: apmbios pcibios eltorito PMM > | > | ata1 master: QEMU DVD-ROM ATAPI-4 CD-Rom/DVD-Rom > | > | gPXE (http://etherboot.org) - 00:04.0 C900 PCI2.10 INT19 PMM0020_ > > According to the serial console, I also saw following message: > (XEN) HVM1: HVM Loader > (XEN) HVM1: Detected Xen v3.4-unstable > (XEN) HVM1: CPU speed is 2300 MHz > (XEN) irq.c:235: Dom1 PCI link 0 changed 0 -> 5 > (XEN) HVM1: PCI-ISA link 0 routed to IRQ5 > (XEN) irq.c:235: Dom1 PCI link 1 changed 0 -> 10 > (XEN) HVM1: PCI-ISA link 1 routed to IRQ10 > (XEN) irq.c:235: Dom1 PCI link 2 changed 0 -> 11 > (XEN) HVM1: PCI-ISA link 2 routed to IRQ11 > (XEN) irq.c:235: Dom1 PCI link 3 changed 0 -> 5 > (XEN) HVM1: PCI-ISA link 3 routed to IRQ5 > (XEN) HVM1: pci dev 01:3 INTA->IRQ10 > (XEN) HVM1: pci dev 03:0 INTA->IRQ5 > (XEN) HVM1: pci dev 04:0 INTA->IRQ5 > (XEN) HVM1: pci dev 02:0 bar 10 size 02000000: f0000008 > (XEN) HVM1: pci dev 03:0 bar 14 size 01000000: f2000008 > (XEN) HVM1: pci dev 02:0 bar 14 size 00001000: f3000000 > (XEN) HVM1: pci dev 03:0 bar 10 size 00000100: 0000c001 > (XEN) HVM1: pci dev 04:0 bar 10 size 00000100: 0000c101 > (XEN) HVM1: pci dev 04:0 bar 14 size 00000100: f3001000 > (XEN) HVM1: pci dev 01:1 bar 20 size 00000010: 0000c201 > (XEN) HVM1: Multiprocessor initialisation: > (XEN) HVM1: - CPU0 ... 48-bit phys ... fixed MTRRs ... var MTRRs [2/8] > ... don. > (XEN) HVM1: Testing HVM environment: > (XEN) HVM1: - REP INSB across page boundaries ... passed > (XEN) HVM1: Passed 1/1 tests > (XEN) HVM1: Writing SMBIOS tables ... > (XEN) HVM1: Loading ROMBIOS ... > (XEN) HVM1: 9628 bytes of ROMBIOS high-memory extensions: > (XEN) HVM1: Relocating to 0xfc000000-0xfc00259c ... done > (XEN) HVM1: Creating MP tables ... > (XEN) HVM1: Loading Cirrus VGABIOS ... > (XEN) HVM1: Loading PCI Option ROM ... > (XEN) HVM1: - Manufacturer: http://etherboot.org > (XEN) HVM1: - Product name: gPXE > (XEN) HVM1: Loading ACPI ... > (XEN) HVM1: - Lo data: 000ea020-000ea04f > (XEN) HVM1: - Hi data: fc002800-fc0042bf > (XEN) HVM1: vm86 TSS at fc004400 > (XEN) HVM1: BIOS map: > (XEN) HVM1: c0000-c8fff: VGA BIOS > (XEN) HVM1: c9000-d57ff: Etherboot ROM > (XEN) HVM1: eb000-eb14c: SMBIOS tables > (XEN) HVM1: f0000-fffff: Main BIOS > (XEN) HVM1: Invoking ROMBIOS ... > (XEN) HVM1: $Revision: 1.221 $ $Date: 2008/12/07 17:32:29 $ > (XEN) stdvga.c:147:d1 entering stdvga and caching modes > (XEN) HVM1: VGABios $Id: vgabios.c,v 1.67 2008/01/27 09:44:12 vruppert > Exp $ > (XEN) HVM1: Bochs BIOS - build: 06/23/99 > (XEN) HVM1: $Revision: 1.221 $ $Date: 2008/12/07 17:32:29 $ > (XEN) HVM1: Options: apmbios pcibios eltorito PMM > (XEN) HVM1: > (XEN) HVM1: ata1 master: QEMU DVD-ROM ATAPI-4 CD-Rom/DVD-Rom > (XEN) HVM1: IDE time out > (XEN) HVM1: > > No suspicious log is found in /var/log/xen/xend.log. > > I came across this problem with AMD Quad-Core Opteron(tm) 2356 on Dell > PowerEdge R805. However, this kind of problem did not happened on the > another machine I use (Intel Xeon 5130). > > Does anybody know how to fix this problem or how to analyze it? > > Thank you in advance, > -- Yoshisato YANAGISAWA, Ph.D. Open Source Software Computing Project NTT Cyber Space Laboratories NIPPON TELEGRAPH AND TELEPHONE CORPORATION 1-1 Hikarinooka, Yokosuka-Shi, Kanagawa 239-0847, Japan ^ permalink raw reply [flat|nested] 10+ messages in thread
* RE: Could not run HVM domain on the latest xen-unstable.hgand Barcelona. 2009-03-10 23:18 ` Could not run HVM domain on the latest xen-unstable.hgand Barcelona Huang2, Wei 2009-03-11 1:40 ` Yoshisato YANAGISAWA @ 2009-03-11 3:41 ` Kouya Shimura 2009-03-11 4:51 ` Could not run HVM domain on the latestxen-unstable.hgand Barcelona Huang2, Wei 2009-03-11 5:02 ` Could not run HVM domain on the latest xen-unstable.hgand Barcelona Yoshiaki Tamura 1 sibling, 2 replies; 10+ messages in thread From: Kouya Shimura @ 2009-03-11 3:41 UTC (permalink / raw) To: Huang2, Wei; +Cc: xen-devel, takebe_akio, Yoshisato YANAGISAWA, Keir Fraser [-- Attachment #1: message body text --] [-- Type: text/plain, Size: 5666 bytes --] Hi Wei and YANAGISAWA-san, I'm looking into it. But it's difficult for me since I don't have a barcelona machine. Your cooperation would be really appreciated. At first, I suspected gPXE. But the e1000 driver in gPXE never use PMM services. On the other hand, rtl8139 uses PMM. So PMM looks a culprit. But, now I suspect 32bit gateway code in rombios, since the problem is only occured on AMD cpu which directly executes real mode code. On the other hand, Intel cpu emultates real mode code. The PMM is the first user of 32bit gateway code in the boot sequence. In order to confirm it, could you try the attached patch for test? N.B. the size of guest memory must be smaller than 0xdeadbeaf(3.5GB). If the guest dies with the following serial console message, 32bit gateway code is correct. otherwise, the guest hanging up means PMM is innocent. ========================================================================== (XEN) io.c:199:d1 MMIO emulation failed @ 0008:deadbeaf: db e6 1c 80 8c 82 (XEN) hvm.c:810:d1 Triple fault on VCPU0 - invoking HVM system reset. ========================================================================== If you get the above message, please revert only 32bitgateway.c and try again. You can get debug messages of PMM. Thanks, Kouya Huang2, Wei writes: > We saw this problem recently. I traced it down to PMM patch submitted by > Kouya and Akio (changeset 19077). > > To fix this problem temporarily, add mode=e1000 to your vif option. > vif = [ 'type=ioemu, bridge=xenbr0, model=e1000'] > > > Regards, > > -Wei > > -----Original Message----- > From: xen-devel-bounces@lists.xensource.com > [mailto:xen-devel-bounces@lists.xensource.com] On Behalf Of Yoshisato > YANAGISAWA > Sent: Tuesday, March 10, 2009 3:17 AM > To: xen-devel > Subject: [Xen-devel] Could not run HVM domain on the latest > xen-unstable.hgand Barcelona. > > > Hi all, > > Does anybody have tested the latest xen-unstable.hg with an HVM domain > on AMD Barcelona Opteron? > I cloned xen-unstable.hg today (2009-03-10 JST), made config file for > booting an OS image from CD-ROM, and tried to run an HVM domain. > However, it stops running while booting. > > According to the vnc, the virtual machine displayed following message: > (snip) > | Bochs BIOS - build: 06/23/99 > | $Revision: 1.221 $ $Date: 2008/12/07 17:32:29 $ > | Options: apmbios pcibios eltorito PMM > | > | ata1 master: QEMU DVD-ROM ATAPI-4 CD-Rom/DVD-Rom > | > | gPXE (http://etherboot.org) - 00:04.0 C900 PCI2.10 INT19 PMM0020_ > > According to the serial console, I also saw following message: > (XEN) HVM1: HVM Loader > (XEN) HVM1: Detected Xen v3.4-unstable > (XEN) HVM1: CPU speed is 2300 MHz > (XEN) irq.c:235: Dom1 PCI link 0 changed 0 -> 5 > (XEN) HVM1: PCI-ISA link 0 routed to IRQ5 > (XEN) irq.c:235: Dom1 PCI link 1 changed 0 -> 10 > (XEN) HVM1: PCI-ISA link 1 routed to IRQ10 > (XEN) irq.c:235: Dom1 PCI link 2 changed 0 -> 11 > (XEN) HVM1: PCI-ISA link 2 routed to IRQ11 > (XEN) irq.c:235: Dom1 PCI link 3 changed 0 -> 5 > (XEN) HVM1: PCI-ISA link 3 routed to IRQ5 > (XEN) HVM1: pci dev 01:3 INTA->IRQ10 > (XEN) HVM1: pci dev 03:0 INTA->IRQ5 > (XEN) HVM1: pci dev 04:0 INTA->IRQ5 > (XEN) HVM1: pci dev 02:0 bar 10 size 02000000: f0000008 > (XEN) HVM1: pci dev 03:0 bar 14 size 01000000: f2000008 > (XEN) HVM1: pci dev 02:0 bar 14 size 00001000: f3000000 > (XEN) HVM1: pci dev 03:0 bar 10 size 00000100: 0000c001 > (XEN) HVM1: pci dev 04:0 bar 10 size 00000100: 0000c101 > (XEN) HVM1: pci dev 04:0 bar 14 size 00000100: f3001000 > (XEN) HVM1: pci dev 01:1 bar 20 size 00000010: 0000c201 > (XEN) HVM1: Multiprocessor initialisation: > (XEN) HVM1: - CPU0 ... 48-bit phys ... fixed MTRRs ... var MTRRs [2/8] > ... don. > (XEN) HVM1: Testing HVM environment: > (XEN) HVM1: - REP INSB across page boundaries ... passed > (XEN) HVM1: Passed 1/1 tests > (XEN) HVM1: Writing SMBIOS tables ... > (XEN) HVM1: Loading ROMBIOS ... > (XEN) HVM1: 9628 bytes of ROMBIOS high-memory extensions: > (XEN) HVM1: Relocating to 0xfc000000-0xfc00259c ... done > (XEN) HVM1: Creating MP tables ... > (XEN) HVM1: Loading Cirrus VGABIOS ... > (XEN) HVM1: Loading PCI Option ROM ... > (XEN) HVM1: - Manufacturer: http://etherboot.org > (XEN) HVM1: - Product name: gPXE > (XEN) HVM1: Loading ACPI ... > (XEN) HVM1: - Lo data: 000ea020-000ea04f > (XEN) HVM1: - Hi data: fc002800-fc0042bf > (XEN) HVM1: vm86 TSS at fc004400 > (XEN) HVM1: BIOS map: > (XEN) HVM1: c0000-c8fff: VGA BIOS > (XEN) HVM1: c9000-d57ff: Etherboot ROM > (XEN) HVM1: eb000-eb14c: SMBIOS tables > (XEN) HVM1: f0000-fffff: Main BIOS > (XEN) HVM1: Invoking ROMBIOS ... > (XEN) HVM1: $Revision: 1.221 $ $Date: 2008/12/07 17:32:29 $ > (XEN) stdvga.c:147:d1 entering stdvga and caching modes > (XEN) HVM1: VGABios $Id: vgabios.c,v 1.67 2008/01/27 09:44:12 vruppert > Exp $ > (XEN) HVM1: Bochs BIOS - build: 06/23/99 > (XEN) HVM1: $Revision: 1.221 $ $Date: 2008/12/07 17:32:29 $ > (XEN) HVM1: Options: apmbios pcibios eltorito PMM > (XEN) HVM1: > (XEN) HVM1: ata1 master: QEMU DVD-ROM ATAPI-4 CD-Rom/DVD-Rom > (XEN) HVM1: IDE time out > (XEN) HVM1: > > No suspicious log is found in /var/log/xen/xend.log. > > I came across this problem with AMD Quad-Core Opteron(tm) 2356 on Dell > PowerEdge R805. However, this kind of problem did not happened on the > another machine I use (Intel Xeon 5130). > > Does anybody know how to fix this problem or how to analyze it? > > Thank you in advance, > > -- > Yoshisato YANAGISAWA, Ph.D. > Open Source Software Computing Project > NTT Cyber Space Laboratories > NIPPON TELEGRAPH AND TELEPHONE CORPORATION > 1-1 Hikarinooka, Yokosuka-Shi, > Kanagawa 239-0847, Japan [-- Attachment #2: pmm_debug.patch --] [-- Type: text/x-patch, Size: 955 bytes --] diff -r d035b66b5b4d tools/firmware/rombios/32bit/pmm.c --- a/tools/firmware/rombios/32bit/pmm.c Mon Mar 09 15:01:34 2009 +0000 +++ b/tools/firmware/rombios/32bit/pmm.c Wed Mar 11 11:10:00 2009 +0900 @@ -69,7 +69,7 @@ #include <../hvmloader/e820.h> #include "util.h" -#define DEBUG_PMM 0 +#define DEBUG_PMM 1 #define ASSERT(_expr, _action) \ if (!(_expr)) { \ diff -r d035b66b5b4d tools/firmware/rombios/32bitgateway.c --- a/tools/firmware/rombios/32bitgateway.c Mon Mar 09 15:01:34 2009 +0000 +++ b/tools/firmware/rombios/32bitgateway.c Wed Mar 11 11:10:00 2009 +0900 @@ -122,7 +122,11 @@ upcall2: upcall2: push MAX_ARG_BYTES-4+args_off[esp] loop upcall2 +#if 000 mov eax, [BIOS_INFO_PHYSICAL_ADDRESS + BIOSINFO_OFF_bios32_entry] +#else + mov eax, #0xdeadbeaf +#endif call eax add esp, #MAX_ARG_BYTES mov ecx, eax ; Result in ecx [-- Attachment #3: Type: text/plain, Size: 138 bytes --] _______________________________________________ Xen-devel mailing list Xen-devel@lists.xensource.com http://lists.xensource.com/xen-devel ^ permalink raw reply [flat|nested] 10+ messages in thread
* RE: Could not run HVM domain on the latestxen-unstable.hgand Barcelona. 2009-03-11 3:41 ` Kouya Shimura @ 2009-03-11 4:51 ` Huang2, Wei 2009-03-11 8:29 ` Kouya Shimura 2009-03-11 5:02 ` Could not run HVM domain on the latest xen-unstable.hgand Barcelona Yoshiaki Tamura 1 sibling, 1 reply; 10+ messages in thread From: Huang2, Wei @ 2009-03-11 4:51 UTC (permalink / raw) To: Kouya Shimura; +Cc: xen-devel, takebe_akio, Yoshisato YANAGISAWA, Keir Fraser Thank you, Kouya. I will test your patch tomorrow and tell you the results. My previous debug showed that guest hang happened around the following area of romprefix.S (etherboot/gpxe/src/arch/i386/prefix). Copying from ROM to PMM block never finished. /* PMM allocation succeeded: copy ROM to PMM block */ movw $init_debug_pmm_2, %si xorw %di, %di call print_message pushal /* PMM presence implies 1kB stack */ xorw %ax, %ax movw %ax, %es movl image_source, %edi xorl %esi, %esi movzbl romheader_size, %ecx shll $9, %ecx -Wei -----Original Message----- From: Kouya Shimura [mailto:kouya@jp.fujitsu.com] Sent: Tuesday, March 10, 2009 10:42 PM To: Huang2, Wei Cc: Yoshisato YANAGISAWA; xen-devel; takebe_akio@jp.fujitsu.com; Keir Fraser Subject: RE: [Xen-devel] Could not run HVM domain on the latestxen-unstable.hgand Barcelona. Hi Wei and YANAGISAWA-san, I'm looking into it. But it's difficult for me since I don't have a barcelona machine. Your cooperation would be really appreciated. At first, I suspected gPXE. But the e1000 driver in gPXE never use PMM services. On the other hand, rtl8139 uses PMM. So PMM looks a culprit. But, now I suspect 32bit gateway code in rombios, since the problem is only occured on AMD cpu which directly executes real mode code. On the other hand, Intel cpu emultates real mode code. The PMM is the first user of 32bit gateway code in the boot sequence. In order to confirm it, could you try the attached patch for test? N.B. the size of guest memory must be smaller than 0xdeadbeaf(3.5GB). If the guest dies with the following serial console message, 32bit gateway code is correct. otherwise, the guest hanging up means PMM is innocent. ======================================================================== == (XEN) io.c:199:d1 MMIO emulation failed @ 0008:deadbeaf: db e6 1c 80 8c 82 (XEN) hvm.c:810:d1 Triple fault on VCPU0 - invoking HVM system reset. ======================================================================== == If you get the above message, please revert only 32bitgateway.c and try again. You can get debug messages of PMM. Thanks, Kouya Huang2, Wei writes: > We saw this problem recently. I traced it down to PMM patch submitted > by Kouya and Akio (changeset 19077). > > To fix this problem temporarily, add mode=e1000 to your vif option. > vif = [ 'type=ioemu, bridge=xenbr0, model=e1000'] > > > Regards, > > -Wei > > -----Original Message----- > From: xen-devel-bounces@lists.xensource.com > [mailto:xen-devel-bounces@lists.xensource.com] On Behalf Of Yoshisato > YANAGISAWA > Sent: Tuesday, March 10, 2009 3:17 AM > To: xen-devel > Subject: [Xen-devel] Could not run HVM domain on the latest > xen-unstable.hgand Barcelona. > > > Hi all, > > Does anybody have tested the latest xen-unstable.hg with an HVM domain > on AMD Barcelona Opteron? > I cloned xen-unstable.hg today (2009-03-10 JST), made config file for > booting an OS image from CD-ROM, and tried to run an HVM domain. > However, it stops running while booting. > > According to the vnc, the virtual machine displayed following message: > (snip) > | Bochs BIOS - build: 06/23/99 > | $Revision: 1.221 $ $Date: 2008/12/07 17:32:29 $ > | Options: apmbios pcibios eltorito PMM > | > | ata1 master: QEMU DVD-ROM ATAPI-4 CD-Rom/DVD-Rom > | > | gPXE (http://etherboot.org) - 00:04.0 C900 PCI2.10 INT19 PMM0020_ > > According to the serial console, I also saw following message: > (XEN) HVM1: HVM Loader > (XEN) HVM1: Detected Xen v3.4-unstable > (XEN) HVM1: CPU speed is 2300 MHz > (XEN) irq.c:235: Dom1 PCI link 0 changed 0 -> 5 > (XEN) HVM1: PCI-ISA link 0 routed to IRQ5 > (XEN) irq.c:235: Dom1 PCI link 1 changed 0 -> 10 > (XEN) HVM1: PCI-ISA link 1 routed to IRQ10 > (XEN) irq.c:235: Dom1 PCI link 2 changed 0 -> 11 > (XEN) HVM1: PCI-ISA link 2 routed to IRQ11 > (XEN) irq.c:235: Dom1 PCI link 3 changed 0 -> 5 > (XEN) HVM1: PCI-ISA link 3 routed to IRQ5 > (XEN) HVM1: pci dev 01:3 INTA->IRQ10 > (XEN) HVM1: pci dev 03:0 INTA->IRQ5 > (XEN) HVM1: pci dev 04:0 INTA->IRQ5 > (XEN) HVM1: pci dev 02:0 bar 10 size 02000000: f0000008 > (XEN) HVM1: pci dev 03:0 bar 14 size 01000000: f2000008 > (XEN) HVM1: pci dev 02:0 bar 14 size 00001000: f3000000 > (XEN) HVM1: pci dev 03:0 bar 10 size 00000100: 0000c001 > (XEN) HVM1: pci dev 04:0 bar 10 size 00000100: 0000c101 > (XEN) HVM1: pci dev 04:0 bar 14 size 00000100: f3001000 > (XEN) HVM1: pci dev 01:1 bar 20 size 00000010: 0000c201 > (XEN) HVM1: Multiprocessor initialisation: > (XEN) HVM1: - CPU0 ... 48-bit phys ... fixed MTRRs ... var MTRRs > [2/8] ... don. > (XEN) HVM1: Testing HVM environment: > (XEN) HVM1: - REP INSB across page boundaries ... passed > (XEN) HVM1: Passed 1/1 tests > (XEN) HVM1: Writing SMBIOS tables ... > (XEN) HVM1: Loading ROMBIOS ... > (XEN) HVM1: 9628 bytes of ROMBIOS high-memory extensions: > (XEN) HVM1: Relocating to 0xfc000000-0xfc00259c ... done > (XEN) HVM1: Creating MP tables ... > (XEN) HVM1: Loading Cirrus VGABIOS ... > (XEN) HVM1: Loading PCI Option ROM ... > (XEN) HVM1: - Manufacturer: http://etherboot.org > (XEN) HVM1: - Product name: gPXE > (XEN) HVM1: Loading ACPI ... > (XEN) HVM1: - Lo data: 000ea020-000ea04f > (XEN) HVM1: - Hi data: fc002800-fc0042bf > (XEN) HVM1: vm86 TSS at fc004400 > (XEN) HVM1: BIOS map: > (XEN) HVM1: c0000-c8fff: VGA BIOS > (XEN) HVM1: c9000-d57ff: Etherboot ROM > (XEN) HVM1: eb000-eb14c: SMBIOS tables > (XEN) HVM1: f0000-fffff: Main BIOS > (XEN) HVM1: Invoking ROMBIOS ... > (XEN) HVM1: $Revision: 1.221 $ $Date: 2008/12/07 17:32:29 $ > (XEN) stdvga.c:147:d1 entering stdvga and caching modes > (XEN) HVM1: VGABios $Id: vgabios.c,v 1.67 2008/01/27 09:44:12 vruppert > Exp $ > (XEN) HVM1: Bochs BIOS - build: 06/23/99 > (XEN) HVM1: $Revision: 1.221 $ $Date: 2008/12/07 17:32:29 $ > (XEN) HVM1: Options: apmbios pcibios eltorito PMM > (XEN) HVM1: > (XEN) HVM1: ata1 master: QEMU DVD-ROM ATAPI-4 CD-Rom/DVD-Rom > (XEN) HVM1: IDE time out > (XEN) HVM1: > > No suspicious log is found in /var/log/xen/xend.log. > > I came across this problem with AMD Quad-Core Opteron(tm) 2356 on Dell > PowerEdge R805. However, this kind of problem did not happened on the > another machine I use (Intel Xeon 5130). > > Does anybody know how to fix this problem or how to analyze it? > > Thank you in advance, > > -- > Yoshisato YANAGISAWA, Ph.D. > Open Source Software Computing Project NTT Cyber Space Laboratories > NIPPON TELEGRAPH AND TELEPHONE CORPORATION > 1-1 Hikarinooka, Yokosuka-Shi, > Kanagawa 239-0847, Japan ^ permalink raw reply [flat|nested] 10+ messages in thread
* RE: Could not run HVM domain on the latestxen-unstable.hgand Barcelona. 2009-03-11 4:51 ` Could not run HVM domain on the latestxen-unstable.hgand Barcelona Huang2, Wei @ 2009-03-11 8:29 ` Kouya Shimura 0 siblings, 0 replies; 10+ messages in thread From: Kouya Shimura @ 2009-03-11 8:29 UTC (permalink / raw) To: Huang2, Wei; +Cc: xen-devel, takebe_akio, Yoshisato YANAGISAWA, Keir Fraser Hi Wei, Probably the guest is stuck at this point: 292: addr32 rep movsb /* PMM presence implies flat real mode */ This instruction does memcpy(0x200000, 0xc9000, 99*512=50688) where 0x200000(%es:%edi=0:0x200000) is return from PMM, 0xc9000(%ds:%esi=0xc900:0) is the top address of etherboot ROM, 50688(%ecx) is the size of ROM. I guess that something goes wrong around NPT in real mode. Thanks, Kouya Huang2, Wei writes: > Thank you, Kouya. I will test your patch tomorrow and tell you the > results. > > My previous debug showed that guest hang happened around the following > area of romprefix.S (etherboot/gpxe/src/arch/i386/prefix). Copying from > ROM to PMM block never finished. > > /* PMM allocation succeeded: copy ROM to PMM block */ > movw $init_debug_pmm_2, %si > xorw %di, %di > call print_message > pushal /* PMM presence implies 1kB stack */ > xorw %ax, %ax > movw %ax, %es > movl image_source, %edi > xorl %esi, %esi > movzbl romheader_size, %ecx > shll $9, %ecx > > -Wei > -----Original Message----- > From: Kouya Shimura [mailto:kouya@jp.fujitsu.com] > Sent: Tuesday, March 10, 2009 10:42 PM > To: Huang2, Wei > Cc: Yoshisato YANAGISAWA; xen-devel; takebe_akio@jp.fujitsu.com; Keir > Fraser > Subject: RE: [Xen-devel] Could not run HVM domain on the > latestxen-unstable.hgand Barcelona. > > Hi Wei and YANAGISAWA-san, > > I'm looking into it. But it's difficult for me since I don't have a > barcelona machine. Your cooperation would be really appreciated. > > At first, I suspected gPXE. But the e1000 driver in gPXE never use PMM > services. On the other hand, rtl8139 uses PMM. So PMM looks a culprit. > > But, now I suspect 32bit gateway code in rombios, since the problem is > only occured on AMD cpu which directly executes real mode code. > On the other hand, Intel cpu emultates real mode code. The PMM is the > first user of 32bit gateway code in the boot sequence. > > In order to confirm it, could you try the attached patch for test? > N.B. the size of guest memory must be smaller than 0xdeadbeaf(3.5GB). > > If the guest dies with the following serial console message, 32bit > gateway code is correct. otherwise, the guest hanging up means PMM is > innocent. > ======================================================================== > == > (XEN) io.c:199:d1 MMIO emulation failed @ 0008:deadbeaf: db e6 1c 80 8c > 82 > (XEN) hvm.c:810:d1 Triple fault on VCPU0 - invoking HVM system reset. > ======================================================================== > == > > If you get the above message, please revert only 32bitgateway.c and try > again. You can get debug messages of PMM. > > Thanks, > Kouya > > Huang2, Wei writes: > > We saw this problem recently. I traced it down to PMM patch submitted > > by Kouya and Akio (changeset 19077). > > > > To fix this problem temporarily, add mode=e1000 to your vif option. > > vif = [ 'type=ioemu, bridge=xenbr0, model=e1000'] > > > > > > Regards, > > > > -Wei > > > > -----Original Message----- > > From: xen-devel-bounces@lists.xensource.com > > [mailto:xen-devel-bounces@lists.xensource.com] On Behalf Of Yoshisato > > YANAGISAWA > > Sent: Tuesday, March 10, 2009 3:17 AM > > To: xen-devel > > Subject: [Xen-devel] Could not run HVM domain on the latest > > xen-unstable.hgand Barcelona. > > > > > > Hi all, > > > > Does anybody have tested the latest xen-unstable.hg with an HVM domain > > > on AMD Barcelona Opteron? > > I cloned xen-unstable.hg today (2009-03-10 JST), made config file for > > booting an OS image from CD-ROM, and tried to run an HVM domain. > > However, it stops running while booting. > > > > According to the vnc, the virtual machine displayed following message: > > (snip) > > | Bochs BIOS - build: 06/23/99 > > | $Revision: 1.221 $ $Date: 2008/12/07 17:32:29 $ > > | Options: apmbios pcibios eltorito PMM > > | > > | ata1 master: QEMU DVD-ROM ATAPI-4 CD-Rom/DVD-Rom > > | > > | gPXE (http://etherboot.org) - 00:04.0 C900 PCI2.10 INT19 PMM0020_ > > > > According to the serial console, I also saw following message: > > (XEN) HVM1: HVM Loader > > (XEN) HVM1: Detected Xen v3.4-unstable > > (XEN) HVM1: CPU speed is 2300 MHz > > (XEN) irq.c:235: Dom1 PCI link 0 changed 0 -> 5 > > (XEN) HVM1: PCI-ISA link 0 routed to IRQ5 > > (XEN) irq.c:235: Dom1 PCI link 1 changed 0 -> 10 > > (XEN) HVM1: PCI-ISA link 1 routed to IRQ10 > > (XEN) irq.c:235: Dom1 PCI link 2 changed 0 -> 11 > > (XEN) HVM1: PCI-ISA link 2 routed to IRQ11 > > (XEN) irq.c:235: Dom1 PCI link 3 changed 0 -> 5 > > (XEN) HVM1: PCI-ISA link 3 routed to IRQ5 > > (XEN) HVM1: pci dev 01:3 INTA->IRQ10 > > (XEN) HVM1: pci dev 03:0 INTA->IRQ5 > > (XEN) HVM1: pci dev 04:0 INTA->IRQ5 > > (XEN) HVM1: pci dev 02:0 bar 10 size 02000000: f0000008 > > (XEN) HVM1: pci dev 03:0 bar 14 size 01000000: f2000008 > > (XEN) HVM1: pci dev 02:0 bar 14 size 00001000: f3000000 > > (XEN) HVM1: pci dev 03:0 bar 10 size 00000100: 0000c001 > > (XEN) HVM1: pci dev 04:0 bar 10 size 00000100: 0000c101 > > (XEN) HVM1: pci dev 04:0 bar 14 size 00000100: f3001000 > > (XEN) HVM1: pci dev 01:1 bar 20 size 00000010: 0000c201 > > (XEN) HVM1: Multiprocessor initialisation: > > (XEN) HVM1: - CPU0 ... 48-bit phys ... fixed MTRRs ... var MTRRs > > [2/8] ... don. > > (XEN) HVM1: Testing HVM environment: > > (XEN) HVM1: - REP INSB across page boundaries ... passed > > (XEN) HVM1: Passed 1/1 tests > > (XEN) HVM1: Writing SMBIOS tables ... > > (XEN) HVM1: Loading ROMBIOS ... > > (XEN) HVM1: 9628 bytes of ROMBIOS high-memory extensions: > > (XEN) HVM1: Relocating to 0xfc000000-0xfc00259c ... done > > (XEN) HVM1: Creating MP tables ... > > (XEN) HVM1: Loading Cirrus VGABIOS ... > > (XEN) HVM1: Loading PCI Option ROM ... > > (XEN) HVM1: - Manufacturer: http://etherboot.org > > (XEN) HVM1: - Product name: gPXE > > (XEN) HVM1: Loading ACPI ... > > (XEN) HVM1: - Lo data: 000ea020-000ea04f > > (XEN) HVM1: - Hi data: fc002800-fc0042bf > > (XEN) HVM1: vm86 TSS at fc004400 > > (XEN) HVM1: BIOS map: > > (XEN) HVM1: c0000-c8fff: VGA BIOS > > (XEN) HVM1: c9000-d57ff: Etherboot ROM > > (XEN) HVM1: eb000-eb14c: SMBIOS tables > > (XEN) HVM1: f0000-fffff: Main BIOS > > (XEN) HVM1: Invoking ROMBIOS ... > > (XEN) HVM1: $Revision: 1.221 $ $Date: 2008/12/07 17:32:29 $ > > (XEN) stdvga.c:147:d1 entering stdvga and caching modes > > (XEN) HVM1: VGABios $Id: vgabios.c,v 1.67 2008/01/27 09:44:12 vruppert > > > Exp $ > > (XEN) HVM1: Bochs BIOS - build: 06/23/99 > > (XEN) HVM1: $Revision: 1.221 $ $Date: 2008/12/07 17:32:29 $ > > (XEN) HVM1: Options: apmbios pcibios eltorito PMM > > (XEN) HVM1: > > (XEN) HVM1: ata1 master: QEMU DVD-ROM ATAPI-4 CD-Rom/DVD-Rom > > (XEN) HVM1: IDE time out > > (XEN) HVM1: > > > > No suspicious log is found in /var/log/xen/xend.log. > > > > I came across this problem with AMD Quad-Core Opteron(tm) 2356 on Dell > > > PowerEdge R805. However, this kind of problem did not happened on the > > > another machine I use (Intel Xeon 5130). > > > > Does anybody know how to fix this problem or how to analyze it? > > > > Thank you in advance, > > > > -- > > Yoshisato YANAGISAWA, Ph.D. > > Open Source Software Computing Project NTT Cyber Space Laboratories > > NIPPON TELEGRAPH AND TELEPHONE CORPORATION > > 1-1 Hikarinooka, Yokosuka-Shi, > > Kanagawa 239-0847, Japan > > > > _______________________________________________ > Xen-devel mailing list > Xen-devel@lists.xensource.com > http://lists.xensource.com/xen-devel ^ permalink raw reply [flat|nested] 10+ messages in thread
* Re: Could not run HVM domain on the latest xen-unstable.hgand Barcelona. 2009-03-11 3:41 ` Kouya Shimura 2009-03-11 4:51 ` Could not run HVM domain on the latestxen-unstable.hgand Barcelona Huang2, Wei @ 2009-03-11 5:02 ` Yoshiaki Tamura 2009-03-11 5:36 ` Kouya Shimura 1 sibling, 1 reply; 10+ messages in thread From: Yoshiaki Tamura @ 2009-03-11 5:02 UTC (permalink / raw) To: Kouya Shimura Cc: Keir Fraser, Huang2, Wei, takebe_akio, xen-devel, Yoshisato YANAGISAWA Hi, Thanks for handling this issue. I tried your patch and got the following messages. > If the guest dies with the following serial console message, 32bit > gateway code is correct. otherwise, the guest hanging up means PMM is > innocent. > ========================================================================== > (XEN) io.c:199:d1 MMIO emulation failed @ 0008:deadbeaf: db e6 1c 80 8c 82 > (XEN) hvm.c:810:d1 Triple fault on VCPU0 - invoking HVM system reset. > ========================================================================== (XEN) HVM1: ata1 master: QEMU DVD-ROM ATAPI-4 CD-Rom/DVD-Rom (XEN) HVM1: IDE time out (XEN) HVM1: (XEN) io.c:199:d1 MMIO emulation failed @ 0008:deadbeaf: 00 00 00 00 84 be (XEN) hvm.c:810:d1 Triple fault on VCPU0 - invoking HVM system reset. > If you get the above message, please revert only 32bitgateway.c and > try again. You can get debug messages of PMM. I reverted 32bitgateway.c part, and got the following message on the console. (XEN) HVM1: PMM Alloc length=20000 handle=ffffffff flags=6 ret=200000 Let me know if I was doing wrong. Hope this help. Thanks, Yoshi > > Thanks, > Kouya > > Huang2, Wei writes: >> We saw this problem recently. I traced it down to PMM patch submitted by >> Kouya and Akio (changeset 19077). >> >> To fix this problem temporarily, add mode=e1000 to your vif option. >> vif = [ 'type=ioemu, bridge=xenbr0, model=e1000'] >> >> >> Regards, >> >> -Wei >> >> -----Original Message----- >> From: xen-devel-bounces@lists.xensource.com >> [mailto:xen-devel-bounces@lists.xensource.com] On Behalf Of Yoshisato >> YANAGISAWA >> Sent: Tuesday, March 10, 2009 3:17 AM >> To: xen-devel >> Subject: [Xen-devel] Could not run HVM domain on the latest >> xen-unstable.hgand Barcelona. >> >> >> Hi all, >> >> Does anybody have tested the latest xen-unstable.hg with an HVM domain >> on AMD Barcelona Opteron? >> I cloned xen-unstable.hg today (2009-03-10 JST), made config file for >> booting an OS image from CD-ROM, and tried to run an HVM domain. >> However, it stops running while booting. >> >> According to the vnc, the virtual machine displayed following message: >> (snip) >> | Bochs BIOS - build: 06/23/99 >> | $Revision: 1.221 $ $Date: 2008/12/07 17:32:29 $ >> | Options: apmbios pcibios eltorito PMM >> | >> | ata1 master: QEMU DVD-ROM ATAPI-4 CD-Rom/DVD-Rom >> | >> | gPXE (http://etherboot.org) - 00:04.0 C900 PCI2.10 INT19 PMM0020_ >> >> According to the serial console, I also saw following message: >> (XEN) HVM1: HVM Loader >> (XEN) HVM1: Detected Xen v3.4-unstable >> (XEN) HVM1: CPU speed is 2300 MHz >> (XEN) irq.c:235: Dom1 PCI link 0 changed 0 -> 5 >> (XEN) HVM1: PCI-ISA link 0 routed to IRQ5 >> (XEN) irq.c:235: Dom1 PCI link 1 changed 0 -> 10 >> (XEN) HVM1: PCI-ISA link 1 routed to IRQ10 >> (XEN) irq.c:235: Dom1 PCI link 2 changed 0 -> 11 >> (XEN) HVM1: PCI-ISA link 2 routed to IRQ11 >> (XEN) irq.c:235: Dom1 PCI link 3 changed 0 -> 5 >> (XEN) HVM1: PCI-ISA link 3 routed to IRQ5 >> (XEN) HVM1: pci dev 01:3 INTA->IRQ10 >> (XEN) HVM1: pci dev 03:0 INTA->IRQ5 >> (XEN) HVM1: pci dev 04:0 INTA->IRQ5 >> (XEN) HVM1: pci dev 02:0 bar 10 size 02000000: f0000008 >> (XEN) HVM1: pci dev 03:0 bar 14 size 01000000: f2000008 >> (XEN) HVM1: pci dev 02:0 bar 14 size 00001000: f3000000 >> (XEN) HVM1: pci dev 03:0 bar 10 size 00000100: 0000c001 >> (XEN) HVM1: pci dev 04:0 bar 10 size 00000100: 0000c101 >> (XEN) HVM1: pci dev 04:0 bar 14 size 00000100: f3001000 >> (XEN) HVM1: pci dev 01:1 bar 20 size 00000010: 0000c201 >> (XEN) HVM1: Multiprocessor initialisation: >> (XEN) HVM1: - CPU0 ... 48-bit phys ... fixed MTRRs ... var MTRRs [2/8] >> ... don. >> (XEN) HVM1: Testing HVM environment: >> (XEN) HVM1: - REP INSB across page boundaries ... passed >> (XEN) HVM1: Passed 1/1 tests >> (XEN) HVM1: Writing SMBIOS tables ... >> (XEN) HVM1: Loading ROMBIOS ... >> (XEN) HVM1: 9628 bytes of ROMBIOS high-memory extensions: >> (XEN) HVM1: Relocating to 0xfc000000-0xfc00259c ... done >> (XEN) HVM1: Creating MP tables ... >> (XEN) HVM1: Loading Cirrus VGABIOS ... >> (XEN) HVM1: Loading PCI Option ROM ... >> (XEN) HVM1: - Manufacturer: http://etherboot.org >> (XEN) HVM1: - Product name: gPXE >> (XEN) HVM1: Loading ACPI ... >> (XEN) HVM1: - Lo data: 000ea020-000ea04f >> (XEN) HVM1: - Hi data: fc002800-fc0042bf >> (XEN) HVM1: vm86 TSS at fc004400 >> (XEN) HVM1: BIOS map: >> (XEN) HVM1: c0000-c8fff: VGA BIOS >> (XEN) HVM1: c9000-d57ff: Etherboot ROM >> (XEN) HVM1: eb000-eb14c: SMBIOS tables >> (XEN) HVM1: f0000-fffff: Main BIOS >> (XEN) HVM1: Invoking ROMBIOS ... >> (XEN) HVM1: $Revision: 1.221 $ $Date: 2008/12/07 17:32:29 $ >> (XEN) stdvga.c:147:d1 entering stdvga and caching modes >> (XEN) HVM1: VGABios $Id: vgabios.c,v 1.67 2008/01/27 09:44:12 vruppert >> Exp $ >> (XEN) HVM1: Bochs BIOS - build: 06/23/99 >> (XEN) HVM1: $Revision: 1.221 $ $Date: 2008/12/07 17:32:29 $ >> (XEN) HVM1: Options: apmbios pcibios eltorito PMM >> (XEN) HVM1: >> (XEN) HVM1: ata1 master: QEMU DVD-ROM ATAPI-4 CD-Rom/DVD-Rom >> (XEN) HVM1: IDE time out >> (XEN) HVM1: >> >> No suspicious log is found in /var/log/xen/xend.log. >> >> I came across this problem with AMD Quad-Core Opteron(tm) 2356 on Dell >> PowerEdge R805. However, this kind of problem did not happened on the >> another machine I use (Intel Xeon 5130). >> >> Does anybody know how to fix this problem or how to analyze it? >> >> Thank you in advance, >> >> -- >> Yoshisato YANAGISAWA, Ph.D. >> Open Source Software Computing Project >> NTT Cyber Space Laboratories >> NIPPON TELEGRAPH AND TELEPHONE CORPORATION >> 1-1 Hikarinooka, Yokosuka-Shi, >> Kanagawa 239-0847, Japan > > > ------------------------------------------------------------------------ > > _______________________________________________ > Xen-devel mailing list > Xen-devel@lists.xensource.com > http://lists.xensource.com/xen-devel -- TAMURA, Yoshiaki NTT Cyber Space Labs OSS Computing Project Kernel Group E-mail: tamura.yoshiaki@lab.ntt.co.jp TEL: +81-46-859-2771 FAX: +81-46-855-1152 Address: 1-1 Hikarinooka, Yokosuka Kanagawa 239-0847 JAPAN ^ permalink raw reply [flat|nested] 10+ messages in thread
* Re: Could not run HVM domain on the latest xen-unstable.hgand Barcelona. 2009-03-11 5:02 ` Could not run HVM domain on the latest xen-unstable.hgand Barcelona Yoshiaki Tamura @ 2009-03-11 5:36 ` Kouya Shimura 2009-03-11 5:51 ` Yoshiaki Tamura 0 siblings, 1 reply; 10+ messages in thread From: Kouya Shimura @ 2009-03-11 5:36 UTC (permalink / raw) To: Yoshiaki Tamura Cc: xen-devel, Huang2, Wei, takebe_akio, Keir Fraser, Yoshisato YANAGISAWA Hi Tamura-san, Thank you for testing. That is very helpful. PMM works well as I expected. gPXE looks the culprit. May I ask you one more favor? Could you take an output of the following command for about 30sec. N.B. replace "<domid>" as the domain id. ================================================================= $ while true; do /usr/lib64/xen/bin/xenctx <domid>; sleep 1; done ================================================================= Thanks, Kouya Yoshiaki Tamura writes: > Hi, > > Thanks for handling this issue. > I tried your patch and got the following messages. > > > If the guest dies with the following serial console message, 32bit > > gateway code is correct. otherwise, the guest hanging up means PMM is > > innocent. > > ========================================================================== > > (XEN) io.c:199:d1 MMIO emulation failed @ 0008:deadbeaf: db e6 1c 80 8c 82 > > (XEN) hvm.c:810:d1 Triple fault on VCPU0 - invoking HVM system reset. > > ========================================================================== > > (XEN) HVM1: ata1 master: QEMU DVD-ROM ATAPI-4 CD-Rom/DVD-Rom > (XEN) HVM1: IDE time out > (XEN) HVM1: > (XEN) io.c:199:d1 MMIO emulation failed @ 0008:deadbeaf: 00 00 00 00 84 be > (XEN) hvm.c:810:d1 Triple fault on VCPU0 - invoking HVM system reset. > > > If you get the above message, please revert only 32bitgateway.c and > > try again. You can get debug messages of PMM. > > I reverted 32bitgateway.c part, and got the following message on the console. > > (XEN) HVM1: PMM Alloc length=20000 handle=ffffffff flags=6 ret=200000 > > Let me know if I was doing wrong. > Hope this help. > > Thanks, > > Yoshi > > > > > Thanks, > > Kouya > > > > Huang2, Wei writes: > >> We saw this problem recently. I traced it down to PMM patch submitted by > >> Kouya and Akio (changeset 19077). > >> > >> To fix this problem temporarily, add mode=e1000 to your vif option. > >> vif = [ 'type=ioemu, bridge=xenbr0, model=e1000'] > >> > >> > >> Regards, > >> > >> -Wei > >> > >> -----Original Message----- > >> From: xen-devel-bounces@lists.xensource.com > >> [mailto:xen-devel-bounces@lists.xensource.com] On Behalf Of Yoshisato > >> YANAGISAWA > >> Sent: Tuesday, March 10, 2009 3:17 AM > >> To: xen-devel > >> Subject: [Xen-devel] Could not run HVM domain on the latest > >> xen-unstable.hgand Barcelona. > >> > >> > >> Hi all, > >> > >> Does anybody have tested the latest xen-unstable.hg with an HVM domain > >> on AMD Barcelona Opteron? > >> I cloned xen-unstable.hg today (2009-03-10 JST), made config file for > >> booting an OS image from CD-ROM, and tried to run an HVM domain. > >> However, it stops running while booting. > >> > >> According to the vnc, the virtual machine displayed following message: > >> (snip) > >> | Bochs BIOS - build: 06/23/99 > >> | $Revision: 1.221 $ $Date: 2008/12/07 17:32:29 $ > >> | Options: apmbios pcibios eltorito PMM > >> | > >> | ata1 master: QEMU DVD-ROM ATAPI-4 CD-Rom/DVD-Rom > >> | > >> | gPXE (http://etherboot.org) - 00:04.0 C900 PCI2.10 INT19 PMM0020_ > >> > >> According to the serial console, I also saw following message: > >> (XEN) HVM1: HVM Loader > >> (XEN) HVM1: Detected Xen v3.4-unstable > >> (XEN) HVM1: CPU speed is 2300 MHz > >> (XEN) irq.c:235: Dom1 PCI link 0 changed 0 -> 5 > >> (XEN) HVM1: PCI-ISA link 0 routed to IRQ5 > >> (XEN) irq.c:235: Dom1 PCI link 1 changed 0 -> 10 > >> (XEN) HVM1: PCI-ISA link 1 routed to IRQ10 > >> (XEN) irq.c:235: Dom1 PCI link 2 changed 0 -> 11 > >> (XEN) HVM1: PCI-ISA link 2 routed to IRQ11 > >> (XEN) irq.c:235: Dom1 PCI link 3 changed 0 -> 5 > >> (XEN) HVM1: PCI-ISA link 3 routed to IRQ5 > >> (XEN) HVM1: pci dev 01:3 INTA->IRQ10 > >> (XEN) HVM1: pci dev 03:0 INTA->IRQ5 > >> (XEN) HVM1: pci dev 04:0 INTA->IRQ5 > >> (XEN) HVM1: pci dev 02:0 bar 10 size 02000000: f0000008 > >> (XEN) HVM1: pci dev 03:0 bar 14 size 01000000: f2000008 > >> (XEN) HVM1: pci dev 02:0 bar 14 size 00001000: f3000000 > >> (XEN) HVM1: pci dev 03:0 bar 10 size 00000100: 0000c001 > >> (XEN) HVM1: pci dev 04:0 bar 10 size 00000100: 0000c101 > >> (XEN) HVM1: pci dev 04:0 bar 14 size 00000100: f3001000 > >> (XEN) HVM1: pci dev 01:1 bar 20 size 00000010: 0000c201 > >> (XEN) HVM1: Multiprocessor initialisation: > >> (XEN) HVM1: - CPU0 ... 48-bit phys ... fixed MTRRs ... var MTRRs [2/8] > >> ... don. > >> (XEN) HVM1: Testing HVM environment: > >> (XEN) HVM1: - REP INSB across page boundaries ... passed > >> (XEN) HVM1: Passed 1/1 tests > >> (XEN) HVM1: Writing SMBIOS tables ... > >> (XEN) HVM1: Loading ROMBIOS ... > >> (XEN) HVM1: 9628 bytes of ROMBIOS high-memory extensions: > >> (XEN) HVM1: Relocating to 0xfc000000-0xfc00259c ... done > >> (XEN) HVM1: Creating MP tables ... > >> (XEN) HVM1: Loading Cirrus VGABIOS ... > >> (XEN) HVM1: Loading PCI Option ROM ... > >> (XEN) HVM1: - Manufacturer: http://etherboot.org > >> (XEN) HVM1: - Product name: gPXE > >> (XEN) HVM1: Loading ACPI ... > >> (XEN) HVM1: - Lo data: 000ea020-000ea04f > >> (XEN) HVM1: - Hi data: fc002800-fc0042bf > >> (XEN) HVM1: vm86 TSS at fc004400 > >> (XEN) HVM1: BIOS map: > >> (XEN) HVM1: c0000-c8fff: VGA BIOS > >> (XEN) HVM1: c9000-d57ff: Etherboot ROM > >> (XEN) HVM1: eb000-eb14c: SMBIOS tables > >> (XEN) HVM1: f0000-fffff: Main BIOS > >> (XEN) HVM1: Invoking ROMBIOS ... > >> (XEN) HVM1: $Revision: 1.221 $ $Date: 2008/12/07 17:32:29 $ > >> (XEN) stdvga.c:147:d1 entering stdvga and caching modes > >> (XEN) HVM1: VGABios $Id: vgabios.c,v 1.67 2008/01/27 09:44:12 vruppert > >> Exp $ > >> (XEN) HVM1: Bochs BIOS - build: 06/23/99 > >> (XEN) HVM1: $Revision: 1.221 $ $Date: 2008/12/07 17:32:29 $ > >> (XEN) HVM1: Options: apmbios pcibios eltorito PMM > >> (XEN) HVM1: > >> (XEN) HVM1: ata1 master: QEMU DVD-ROM ATAPI-4 CD-Rom/DVD-Rom > >> (XEN) HVM1: IDE time out > >> (XEN) HVM1: > >> > >> No suspicious log is found in /var/log/xen/xend.log. > >> > >> I came across this problem with AMD Quad-Core Opteron(tm) 2356 on Dell > >> PowerEdge R805. However, this kind of problem did not happened on the > >> another machine I use (Intel Xeon 5130). > >> > >> Does anybody know how to fix this problem or how to analyze it? > >> > >> Thank you in advance, > >> > >> -- > >> Yoshisato YANAGISAWA, Ph.D. > >> Open Source Software Computing Project > >> NTT Cyber Space Laboratories > >> NIPPON TELEGRAPH AND TELEPHONE CORPORATION > >> 1-1 Hikarinooka, Yokosuka-Shi, > >> Kanagawa 239-0847, Japan > > > > > > ------------------------------------------------------------------------ > > > > _______________________________________________ > > Xen-devel mailing list > > Xen-devel@lists.xensource.com > > http://lists.xensource.com/xen-devel > > > -- > TAMURA, Yoshiaki > > NTT Cyber Space Labs > OSS Computing Project > Kernel Group > E-mail: tamura.yoshiaki@lab.ntt.co.jp > TEL: +81-46-859-2771 > FAX: +81-46-855-1152 > Address: 1-1 Hikarinooka, Yokosuka > Kanagawa 239-0847 JAPAN > > _______________________________________________ > Xen-devel mailing list > Xen-devel@lists.xensource.com > http://lists.xensource.com/xen-devel ^ permalink raw reply [flat|nested] 10+ messages in thread
* Re: Could not run HVM domain on the latest xen-unstable.hgand Barcelona. 2009-03-11 5:36 ` Kouya Shimura @ 2009-03-11 5:51 ` Yoshiaki Tamura 2009-03-11 6:14 ` Kouya Shimura 0 siblings, 1 reply; 10+ messages in thread From: Yoshiaki Tamura @ 2009-03-11 5:51 UTC (permalink / raw) To: Kouya Shimura Cc: Huang2, Wei, xen-devel, takebe_akio, Keir Fraser, Yoshisato YANAGISAWA Hi, > May I ask you one more favor? Sure. > Could you take an output of the following command for about 30sec. > N.B. replace "<domid>" as the domain id. > ================================================================= > $ while true; do /usr/lib64/xen/bin/xenctx <domid>; sleep 1; done > ================================================================= $ while true; do /usr/lib/xen/bin/xenctx 2; sleep 1; done cs:eip: 0000:00000000 flags: 00000002 nz ss:esp: 0000:00000000 eax: 00000000 ebx: 00000000 ecx: 00000000 edx: 00000000 esi: 00000000 edi: 00000000 ebp: 00000000 ds: 0000 es: 0000 fs: 0000 gs: 0033 cs:eip: 0000:00000000 flags: 00000002 nz ss:esp: 0000:00000000 eax: 00000000 ebx: 00000000 ecx: 00000000 edx: 00000000 esi: 00000000 edi: 00000000 ebp: 00000000 ds: 0000 es: 0000 fs: 0000 gs: 0033 cs:eip: 0000:00000000 flags: 00000002 nz ss:esp: 0000:00000000 eax: 00000000 ebx: 00000000 ecx: 00000000 edx: 00000000 esi: 00000000 edi: 00000000 ebp: 00000000 ds: 0000 es: 0000 fs: 0000 gs: 0033 cs:eip: 0000:00000000 flags: 00000002 nz ss:esp: 0000:00000000 eax: 00000000 ebx: 00000000 ecx: 00000000 edx: 00000000 esi: 00000000 edi: 00000000 ebp: 00000000 ds: 0000 es: 0000 fs: 0000 gs: 0033 cs:eip: 0000:00000000 flags: 00000002 nz ss:esp: 0000:00000000 eax: 00000000 ebx: 00000000 ecx: 00000000 edx: 00000000 esi: 00000000 edi: 00000000 ebp: 00000000 ds: 0000 es: 0000 fs: 0000 gs: 0033 cs:eip: 0000:00000000 flags: 00000002 nz ss:esp: 0000:00000000 eax: 00000000 ebx: 00000000 ecx: 00000000 edx: 00000000 esi: 00000000 edi: 00000000 ebp: 00000000 ds: 0000 es: 0000 fs: 0000 gs: 0033 cs:eip: 0000:00000000 flags: 00000002 nz ss:esp: 0000:00000000 eax: 00000000 ebx: 00000000 ecx: 00000000 edx: 00000000 esi: 00000000 edi: 00000000 ebp: 00000000 ds: 0000 es: 0000 fs: 0000 gs: 0033 cs:eip: 0000:00000000 flags: 00000002 nz ss:esp: 0000:00000000 eax: 00000000 ebx: 00000000 ecx: 00000000 edx: 00000000 esi: 00000000 edi: 00000000 ebp: 00000000 ds: 0000 es: 0000 fs: 0000 gs: 0033 cs:eip: 0000:00000000 flags: 00000002 nz ss:esp: 0000:00000000 eax: 00000000 ebx: 00000000 ecx: 00000000 edx: 00000000 esi: 00000000 edi: 00000000 ebp: 00000000 ds: 0000 es: 0000 fs: 0000 gs: 0033 after getting the same message while the guest is kept, it finally says Error: Device 5632 (vbd) could not be connected. Hotplug scripts not working. and the guest is destroyed. Let me know if I can help more. Thanks, Yoshi > > Thanks, > Kouya > > Yoshiaki Tamura writes: >> Hi, >> >> Thanks for handling this issue. >> I tried your patch and got the following messages. >> >>> If the guest dies with the following serial console message, 32bit >>> gateway code is correct. otherwise, the guest hanging up means PMM is >>> innocent. >>> ========================================================================== >>> (XEN) io.c:199:d1 MMIO emulation failed @ 0008:deadbeaf: db e6 1c 80 8c 82 >>> (XEN) hvm.c:810:d1 Triple fault on VCPU0 - invoking HVM system reset. >>> ========================================================================== >> (XEN) HVM1: ata1 master: QEMU DVD-ROM ATAPI-4 CD-Rom/DVD-Rom >> (XEN) HVM1: IDE time out >> (XEN) HVM1: >> (XEN) io.c:199:d1 MMIO emulation failed @ 0008:deadbeaf: 00 00 00 00 84 be >> (XEN) hvm.c:810:d1 Triple fault on VCPU0 - invoking HVM system reset. >> >>> If you get the above message, please revert only 32bitgateway.c and >>> try again. You can get debug messages of PMM. >> I reverted 32bitgateway.c part, and got the following message on the console. >> >> (XEN) HVM1: PMM Alloc length=20000 handle=ffffffff flags=6 ret=200000 >> >> Let me know if I was doing wrong. >> Hope this help. >> >> Thanks, >> >> Yoshi >> >>> Thanks, >>> Kouya >>> >>> Huang2, Wei writes: >>>> We saw this problem recently. I traced it down to PMM patch submitted by >>>> Kouya and Akio (changeset 19077). >>>> >>>> To fix this problem temporarily, add mode=e1000 to your vif option. >>>> vif = [ 'type=ioemu, bridge=xenbr0, model=e1000'] >>>> >>>> >>>> Regards, >>>> >>>> -Wei >>>> >>>> -----Original Message----- >>>> From: xen-devel-bounces@lists.xensource.com >>>> [mailto:xen-devel-bounces@lists.xensource.com] On Behalf Of Yoshisato >>>> YANAGISAWA >>>> Sent: Tuesday, March 10, 2009 3:17 AM >>>> To: xen-devel >>>> Subject: [Xen-devel] Could not run HVM domain on the latest >>>> xen-unstable.hgand Barcelona. >>>> >>>> >>>> Hi all, >>>> >>>> Does anybody have tested the latest xen-unstable.hg with an HVM domain >>>> on AMD Barcelona Opteron? >>>> I cloned xen-unstable.hg today (2009-03-10 JST), made config file for >>>> booting an OS image from CD-ROM, and tried to run an HVM domain. >>>> However, it stops running while booting. >>>> >>>> According to the vnc, the virtual machine displayed following message: >>>> (snip) >>>> | Bochs BIOS - build: 06/23/99 >>>> | $Revision: 1.221 $ $Date: 2008/12/07 17:32:29 $ >>>> | Options: apmbios pcibios eltorito PMM >>>> | >>>> | ata1 master: QEMU DVD-ROM ATAPI-4 CD-Rom/DVD-Rom >>>> | >>>> | gPXE (http://etherboot.org) - 00:04.0 C900 PCI2.10 INT19 PMM0020_ >>>> >>>> According to the serial console, I also saw following message: >>>> (XEN) HVM1: HVM Loader >>>> (XEN) HVM1: Detected Xen v3.4-unstable >>>> (XEN) HVM1: CPU speed is 2300 MHz >>>> (XEN) irq.c:235: Dom1 PCI link 0 changed 0 -> 5 >>>> (XEN) HVM1: PCI-ISA link 0 routed to IRQ5 >>>> (XEN) irq.c:235: Dom1 PCI link 1 changed 0 -> 10 >>>> (XEN) HVM1: PCI-ISA link 1 routed to IRQ10 >>>> (XEN) irq.c:235: Dom1 PCI link 2 changed 0 -> 11 >>>> (XEN) HVM1: PCI-ISA link 2 routed to IRQ11 >>>> (XEN) irq.c:235: Dom1 PCI link 3 changed 0 -> 5 >>>> (XEN) HVM1: PCI-ISA link 3 routed to IRQ5 >>>> (XEN) HVM1: pci dev 01:3 INTA->IRQ10 >>>> (XEN) HVM1: pci dev 03:0 INTA->IRQ5 >>>> (XEN) HVM1: pci dev 04:0 INTA->IRQ5 >>>> (XEN) HVM1: pci dev 02:0 bar 10 size 02000000: f0000008 >>>> (XEN) HVM1: pci dev 03:0 bar 14 size 01000000: f2000008 >>>> (XEN) HVM1: pci dev 02:0 bar 14 size 00001000: f3000000 >>>> (XEN) HVM1: pci dev 03:0 bar 10 size 00000100: 0000c001 >>>> (XEN) HVM1: pci dev 04:0 bar 10 size 00000100: 0000c101 >>>> (XEN) HVM1: pci dev 04:0 bar 14 size 00000100: f3001000 >>>> (XEN) HVM1: pci dev 01:1 bar 20 size 00000010: 0000c201 >>>> (XEN) HVM1: Multiprocessor initialisation: >>>> (XEN) HVM1: - CPU0 ... 48-bit phys ... fixed MTRRs ... var MTRRs [2/8] >>>> ... don. >>>> (XEN) HVM1: Testing HVM environment: >>>> (XEN) HVM1: - REP INSB across page boundaries ... passed >>>> (XEN) HVM1: Passed 1/1 tests >>>> (XEN) HVM1: Writing SMBIOS tables ... >>>> (XEN) HVM1: Loading ROMBIOS ... >>>> (XEN) HVM1: 9628 bytes of ROMBIOS high-memory extensions: >>>> (XEN) HVM1: Relocating to 0xfc000000-0xfc00259c ... done >>>> (XEN) HVM1: Creating MP tables ... >>>> (XEN) HVM1: Loading Cirrus VGABIOS ... >>>> (XEN) HVM1: Loading PCI Option ROM ... >>>> (XEN) HVM1: - Manufacturer: http://etherboot.org >>>> (XEN) HVM1: - Product name: gPXE >>>> (XEN) HVM1: Loading ACPI ... >>>> (XEN) HVM1: - Lo data: 000ea020-000ea04f >>>> (XEN) HVM1: - Hi data: fc002800-fc0042bf >>>> (XEN) HVM1: vm86 TSS at fc004400 >>>> (XEN) HVM1: BIOS map: >>>> (XEN) HVM1: c0000-c8fff: VGA BIOS >>>> (XEN) HVM1: c9000-d57ff: Etherboot ROM >>>> (XEN) HVM1: eb000-eb14c: SMBIOS tables >>>> (XEN) HVM1: f0000-fffff: Main BIOS >>>> (XEN) HVM1: Invoking ROMBIOS ... >>>> (XEN) HVM1: $Revision: 1.221 $ $Date: 2008/12/07 17:32:29 $ >>>> (XEN) stdvga.c:147:d1 entering stdvga and caching modes >>>> (XEN) HVM1: VGABios $Id: vgabios.c,v 1.67 2008/01/27 09:44:12 vruppert >>>> Exp $ >>>> (XEN) HVM1: Bochs BIOS - build: 06/23/99 >>>> (XEN) HVM1: $Revision: 1.221 $ $Date: 2008/12/07 17:32:29 $ >>>> (XEN) HVM1: Options: apmbios pcibios eltorito PMM >>>> (XEN) HVM1: >>>> (XEN) HVM1: ata1 master: QEMU DVD-ROM ATAPI-4 CD-Rom/DVD-Rom >>>> (XEN) HVM1: IDE time out >>>> (XEN) HVM1: >>>> >>>> No suspicious log is found in /var/log/xen/xend.log. >>>> >>>> I came across this problem with AMD Quad-Core Opteron(tm) 2356 on Dell >>>> PowerEdge R805. However, this kind of problem did not happened on the >>>> another machine I use (Intel Xeon 5130). >>>> >>>> Does anybody know how to fix this problem or how to analyze it? >>>> >>>> Thank you in advance, >>>> >>>> -- >>>> Yoshisato YANAGISAWA, Ph.D. >>>> Open Source Software Computing Project >>>> NTT Cyber Space Laboratories >>>> NIPPON TELEGRAPH AND TELEPHONE CORPORATION >>>> 1-1 Hikarinooka, Yokosuka-Shi, >>>> Kanagawa 239-0847, Japan >>> >>> ------------------------------------------------------------------------ >>> >>> _______________________________________________ >>> Xen-devel mailing list >>> Xen-devel@lists.xensource.com >>> http://lists.xensource.com/xen-devel >> >> -- >> TAMURA, Yoshiaki >> >> NTT Cyber Space Labs >> OSS Computing Project >> Kernel Group >> E-mail: tamura.yoshiaki@lab.ntt.co.jp >> TEL: +81-46-859-2771 >> FAX: +81-46-855-1152 >> Address: 1-1 Hikarinooka, Yokosuka >> Kanagawa 239-0847 JAPAN >> ^ permalink raw reply [flat|nested] 10+ messages in thread
* Re: Could not run HVM domain on the latest xen-unstable.hgand Barcelona. 2009-03-11 5:51 ` Yoshiaki Tamura @ 2009-03-11 6:14 ` Kouya Shimura 0 siblings, 0 replies; 10+ messages in thread From: Kouya Shimura @ 2009-03-11 6:14 UTC (permalink / raw) To: Yoshiaki Tamura Cc: Yoshisato YANAGISAWA, Huang2, Wei, takebe_akio, xen-devel, Keir Fraser Hi, Thanks, but this output looks bogus. Maybe the guest doesn't run at all due to waiting for the disk assignment... Thanks, Kouya Yoshiaki Tamura writes: > Hi, > > > May I ask you one more favor? > > Sure. > > > Could you take an output of the following command for about 30sec. > > N.B. replace "<domid>" as the domain id. > > ================================================================= > > $ while true; do /usr/lib64/xen/bin/xenctx <domid>; sleep 1; done > > ================================================================= > > $ while true; do /usr/lib/xen/bin/xenctx 2; sleep 1; done > > cs:eip: 0000:00000000 > flags: 00000002 nz > ss:esp: 0000:00000000 > eax: 00000000 ebx: 00000000 ecx: 00000000 edx: 00000000 > esi: 00000000 edi: 00000000 ebp: 00000000 > ds: 0000 es: 0000 fs: 0000 gs: 0033 [snip] ^ permalink raw reply [flat|nested] 10+ messages in thread
end of thread, other threads:[~2009-03-11 8:29 UTC | newest] Thread overview: 10+ messages (download: mbox.gz follow: Atom feed -- links below jump to the message on this page -- 2009-03-10 8:16 Could not run HVM domain on the latest xen-unstable.hg and Barcelona Yoshisato YANAGISAWA 2009-03-10 23:18 ` Could not run HVM domain on the latest xen-unstable.hgand Barcelona Huang2, Wei 2009-03-11 1:40 ` Yoshisato YANAGISAWA 2009-03-11 3:41 ` Kouya Shimura 2009-03-11 4:51 ` Could not run HVM domain on the latestxen-unstable.hgand Barcelona Huang2, Wei 2009-03-11 8:29 ` Kouya Shimura 2009-03-11 5:02 ` Could not run HVM domain on the latest xen-unstable.hgand Barcelona Yoshiaki Tamura 2009-03-11 5:36 ` Kouya Shimura 2009-03-11 5:51 ` Yoshiaki Tamura 2009-03-11 6:14 ` Kouya Shimura
This is an external index of several public inboxes, see mirroring instructions on how to clone and mirror all data and code used by this external index.