From: Wolfgang Grandegger <wg@grandegger.com>
To: Wolfgang Grandegger <wg@grandegger.com>, linuxppc-dev@ozlabs.org
Subject: Re: powerpc/85xx: Add support for the "socrates" board (MPC8544)
Date: Fri, 20 Mar 2009 23:02:32 +0100 [thread overview]
Message-ID: <49C41278.6060801@grandegger.com> (raw)
In-Reply-To: <20090320041022.GB30527@yookeroo.seuss>
David Gibson wrote:
> On Thu, Mar 19, 2009 at 04:26:44PM +0100, Wolfgang Grandegger wrote:
>> This patch adds support for the "socrates" board based on the MPC8544.
>> Supported are Ethernet, serial console, I2C, I2C-based RTC and
>> temperature sensors, NOR and NAND flash, PCI, USB, CAN and Lime
>> display controller.
>>
>> The multiplexing of FPGA interrupts onto PowerPC interrupt lines is
>> supported through our own fpga_pic interrupt controller driver.
>>
>> For example the SJA1000 controller is level low sensitive connected to
>> fpga_pic line 2 and is routed to the second (of three) irq lines to
>> the CPU:
>
> A few minor device tree nits.
>
>> + soc8544@e0000000 {
>> + #address-cells = <1>;
>> + #size-cells = <1>;
>> + device_type = "soc";
>> +
>> + ranges = <0x00000000 0xe0000000 0x00100000>;
>> + reg = <0xe0000000 0x00001000>; // CCSRBAR 1M
>> + bus-frequency = <0>; // Filled in by U-Boot
>> + compatible = "fsl,socrates-immr", "simple-bus";
>
> This should probably refer to 8544 instead of socrates. Unless you
> really do have a board-specific version of the SoC...
OK, that should then be:
+ compatible = "fsl,mpc8544-immr", "simple-bus";
It should always be with the prefix "mpc", I guess. But some of the
following compatible names are without that prefix:
$ grep -h '\-l2-cache-controller' *
compatible = "fsl,8540-l2-cache-controller";
compatible = "fsl,mpc8536-l2-cache-controller";
compatible = "fsl,8540-l2-cache-controller";
compatible = "fsl,8541-l2-cache-controller";
compatible = "fsl,8544-l2-cache-controller";
compatible = "fsl,8548-l2-cache-controller";
compatible = "fsl,8555-l2-cache-controller";
compatible = "fsl,8540-l2-cache-controller";
compatible = "fsl,8568-l2-cache-controller";
compatible = "fsl,mpc8572-l2-cache-controller";
compatible = "fsl,mpc8572-l2-cache-controller";
compatible = "fsl,mpc8572-l2-cache-controller";
compatible = "fsl,8548-l2-cache-controller";
compatible = "fsl,8560-l2-cache-controller";
compatible = "fsl,mpc8544-l2-cache-controller";
compatible = "fsl,mpc8544-l2-cache-controller";
compatible = "fsl,8540-l2-cache-controller";
compatible = "fsl,8540-l2-cache-controller";
compatible = "fsl,8540-l2-cache-controller";
compatible = "fsl,mpc8548-l2-cache-controller";
compatible = "fsl,mpc8548-l2-cache-controller";
compatible = "fsl,8540-l2-cache-controller";
compatible = "fsl,8540-l2-cache-controller";
That's confusing.
Wolfgang.
next prev parent reply other threads:[~2009-03-20 22:02 UTC|newest]
Thread overview: 23+ messages / expand[flat|nested] mbox.gz Atom feed top
2009-03-19 15:26 powerpc/85xx: Add support for the "socrates" board (MPC8544) Wolfgang Grandegger
2009-03-20 4:10 ` David Gibson
2009-03-20 20:12 ` Wolfgang Grandegger
2009-03-20 22:02 ` Wolfgang Grandegger [this message]
2009-03-20 4:26 ` Kumar Gala
2009-03-20 20:16 ` Wolfgang Grandegger
2009-03-20 5:05 ` Grant Likely
2009-03-20 11:57 ` Wolfgang Grandegger
2009-03-31 9:35 ` Wolfgang Grandegger
2009-03-31 13:23 ` Grant Likely
2009-03-31 13:36 ` Wolfgang Grandegger
2009-03-31 15:05 ` Grant Likely
2009-03-31 15:54 ` Anton Vorontsov
2009-03-31 16:02 ` Grant Likely
2009-04-01 7:36 ` Wolfgang Grandegger
2009-04-01 12:40 ` Grant Likely
2009-04-01 13:10 ` Wolfgang Grandegger
2009-04-01 13:27 ` Kumar Gala
2009-04-01 13:49 ` Grant Likely
2009-04-02 6:38 ` Wolfgang Grandegger
2009-04-02 13:47 ` Kumar Gala
2009-04-02 18:50 ` Wolfgang Grandegger
2009-04-02 19:52 ` Kumar Gala
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=49C41278.6060801@grandegger.com \
--to=wg@grandegger.com \
--cc=linuxppc-dev@ozlabs.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.