From: Jeff Garzik <jeff@garzik.org>
To: Alan Cox <alan@lxorguk.ukuu.org.uk>
Cc: linux-ide@vger.kernel.org
Subject: Re: [PROPOSED] ata: Report 16/32bit PIO as best we can
Date: Thu, 09 Apr 2009 09:08:14 -0400 [thread overview]
Message-ID: <49DDF33E.6000102@garzik.org> (raw)
In-Reply-To: <20090409135323.5b2bed4b@lxorguk.ukuu.org.uk>
[-- Attachment #1: Type: text/plain, Size: 1492 bytes --]
Alan Cox wrote:
> On Thu, 09 Apr 2009 08:50:10 -0400
> Jeff Garzik <jeff@garzik.org> wrote:
>
>> Alan Cox wrote:
>>> Something like this then ?
>>>
>>>
>>> The legacy old IDE API for this is a bit primitive so we try and map stuff
>>> sensibly onto it.
>>>
>>> - Add flags2 as we ran out of flags
>>> - Set PIO over DMA devices to report 32bit
>>> - Add ability to change the PIO32 settings if the controller permits it
>>> - Add that functionality into the sff drivers
>>> - Add that functionality into the VLB legacy driver
>>> - Turn on the 32bit PIO on the ninja32 and add support there
>>>
>>> Signed-off-by: Alan Cox <alan@linux.intel.com>
>> I think the flag2 stuff needs a closer look WRT driver setup, but
>> overall looks good.
>>
>> Consider it ACK'd, if I cannot come up with anything better for flags2
>
> The alternative would be to remove the private 8 flags from flags but
> that means fairly excessive changes to all the devices
Well the obvious alternative is attached... kick the can down the road.
> [Looks smug and notes that he pointed out that driver private flags in
> the same field would turn out to be a bad idea early on ...]
True. At present the flags are inherited from the ata_port_info
structure, so introducing a driver_flags field isn't as trivial as it
might seem, unfortunately.
With the attached patch, you can use ->flags for the two new flags, and
you can set those bits in the driver where you set the other
ATA_FLAG_xxx bits.
Jeff
[-- Attachment #2: patch --]
[-- Type: text/plain, Size: 2495 bytes --]
diff --git a/drivers/ata/sata_promise.c b/drivers/ata/sata_promise.c
index b1fd7d6..c7bd4b4 100644
--- a/drivers/ata/sata_promise.c
+++ b/drivers/ata/sata_promise.c
@@ -127,9 +127,9 @@ enum {
ATA_FLAG_PIO_POLLING,
/* ap->flags bits */
- PDC_FLAG_GEN_II = (1 << 24),
- PDC_FLAG_SATA_PATA = (1 << 25), /* supports SATA + PATA */
- PDC_FLAG_4_PORTS = (1 << 26), /* 4 ports */
+ PDC_FLAG_GEN_II = (1 << 29),
+ PDC_FLAG_SATA_PATA = (1 << 30), /* supports SATA + PATA */
+ PDC_FLAG_4_PORTS = (1 << 31), /* 4 ports */
};
struct pdc_port_priv {
diff --git a/drivers/ata/sata_sil.c b/drivers/ata/sata_sil.c
index e67ce8e..d21afc7 100644
--- a/drivers/ata/sata_sil.c
+++ b/drivers/ata/sata_sil.c
@@ -57,9 +57,9 @@ enum {
/*
* host flags
*/
- SIL_FLAG_NO_SATA_IRQ = (1 << 28),
- SIL_FLAG_RERR_ON_DMA_ACT = (1 << 29),
- SIL_FLAG_MOD15WRITE = (1 << 30),
+ SIL_FLAG_NO_SATA_IRQ = (1 << 29),
+ SIL_FLAG_RERR_ON_DMA_ACT= (1 << 30),
+ SIL_FLAG_MOD15WRITE = (1 << 31),
SIL_DFL_PORT_FLAGS = ATA_FLAG_SATA | ATA_FLAG_NO_LEGACY |
ATA_FLAG_MMIO,
diff --git a/drivers/ata/sata_sil24.c b/drivers/ata/sata_sil24.c
index 77aa8d7..3852a1c 100644
--- a/drivers/ata/sata_sil24.c
+++ b/drivers/ata/sata_sil24.c
@@ -247,7 +247,7 @@ enum {
ATA_FLAG_MMIO | ATA_FLAG_PIO_DMA |
ATA_FLAG_NCQ | ATA_FLAG_ACPI_SATA |
ATA_FLAG_AN | ATA_FLAG_PMP,
- SIL24_FLAG_PCIX_IRQ_WOC = (1 << 24), /* IRQ loss errata on PCI-X */
+ SIL24_FLAG_PCIX_IRQ_WOC = (1 << 31), /* IRQ loss errata on PCI-X */
IRQ_STAT_4PORTS = 0xf,
};
diff --git a/drivers/ata/sata_svw.c b/drivers/ata/sata_svw.c
index 7257f2d..3c37ed0 100644
--- a/drivers/ata/sata_svw.c
+++ b/drivers/ata/sata_svw.c
@@ -59,9 +59,9 @@
enum {
/* ap->flags bits */
- K2_FLAG_SATA_8_PORTS = (1 << 24),
- K2_FLAG_NO_ATAPI_DMA = (1 << 25),
- K2_FLAG_BAR_POS_3 = (1 << 26),
+ K2_FLAG_SATA_8_PORTS = (1 << 29),
+ K2_FLAG_NO_ATAPI_DMA = (1 << 30),
+ K2_FLAG_BAR_POS_3 = (1 << 31),
/* Taskfile registers offsets */
K2_SATA_TF_CMD_OFFSET = 0x00,
diff --git a/include/linux/libata.h b/include/linux/libata.h
index b450a26..42ab418 100644
--- a/include/linux/libata.h
+++ b/include/linux/libata.h
@@ -207,7 +207,7 @@ enum {
*/
ATA_FLAG_DISABLED = (1 << 23), /* port is disabled, ignore it */
- /* bits 24:31 of ap->flags are reserved for LLD specific flags */
+ /* bits 29:31 of ap->flags are reserved for LLD specific flags */
/* struct ata_port pflags */
ATA_PFLAG_EH_PENDING = (1 << 0), /* EH pending */
next prev parent reply other threads:[~2009-04-09 13:08 UTC|newest]
Thread overview: 23+ messages / expand[flat|nested] mbox.gz Atom feed top
2009-04-09 13:32 [PROPOSED] ata: Report 16/32bit PIO as best we can Alan Cox
2009-04-09 12:50 ` Jeff Garzik
2009-04-09 12:53 ` Alan Cox
2009-04-09 13:08 ` Jeff Garzik [this message]
2009-04-09 13:12 ` Alan Cox
2009-04-09 13:33 ` Jeff Garzik
2009-04-09 13:41 ` Alan Cox
2009-04-09 13:45 ` Jeff Garzik
2009-04-09 13:48 ` Tejun Heo
2009-04-09 13:49 ` Tejun Heo
2009-04-09 13:45 ` Tejun Heo
2009-04-09 13:58 ` Alan Cox
2009-04-09 14:02 ` Tejun Heo
2009-04-09 13:02 ` Mark Lord
2009-04-09 13:08 ` Alan Cox
2009-04-13 16:32 ` Jeff Garzik
2009-04-13 16:39 ` Alan Cox
2009-04-13 16:57 ` Jeff Garzik
2009-04-09 13:25 ` Jeff Garzik
2009-04-09 16:57 ` Mark Lord
2009-04-09 20:42 ` Jeff Garzik
2009-04-10 0:38 ` Douglas Gilbert
2009-04-10 0:47 ` Jeff Garzik
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=49DDF33E.6000102@garzik.org \
--to=jeff@garzik.org \
--cc=alan@lxorguk.ukuu.org.uk \
--cc=linux-ide@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.