* hda Regression: jack doesn't mute speaker
@ 2009-04-15 22:01 Ortwin Glück
2009-04-16 6:18 ` Takashi Iwai
0 siblings, 1 reply; 7+ messages in thread
From: Ortwin Glück @ 2009-04-15 22:01 UTC (permalink / raw)
To: alsa-devel
[-- Attachment #1: Type: text/plain, Size: 1571 bytes --]
Hi,
Since 2.6.30-rc1 when I plug in headphones in the side jack the built-in
speakers are not muted any more. Worked fine until 2.6.29.1. Also the "Front"
and "Surround" outputs are now both labeled "Speaker" (see attached images of kmix).
lspci:
00:1b.0 Audio device: Intel Corporation 82801G (ICH7 Family) High Definition
Audio Controller (rev 02)
uname -a:
Linux mithril 2.6.30-rc2 #2 SMP PREEMPT Wed Apr 15 22:51:36 CEST 2009 i686
Intel(R) Core(TM)2 CPU T7600 @ 2.33GHz GenuineIntel GNU/Linux
dmesg:
HDA Intel 0000:00:1b.0: PCI INT A -> GSI 22 (level, low) -> IRQ 22
HDA Intel 0000:00:1b.0: setting latency timer to 6
hda_codec: STAC922x, Apple subsys_id=106b1a00
input: HDA Intel Line In at Ext Left Jack as /class/input/input8
input: HDA Intel Mic at Ext Left Jack as /class/input/input9
hda-intel: IRQ timing workaround is activated for card #0. Suggest a bigger
bdl_pos_adj.
uname -a:
Linux mithril 2.6.29.1 #3 SMP PREEMPT Wed Apr 15 23:03:20 CEST 2009 i686
Intel(R) Core(TM)2 CPU T7600 @ 2.33GHz GenuineIntel GNU/Linux
dmesg:
HDA Intel 0000:00:1b.0: PCI INT A -> GSI 22 (level, low) -> IRQ 22
HDA Intel 0000:00:1b.0: setting latency timer to 64
hda_codec: STAC922x, Apple subsys_id=106b1a00
Apr 15 23:20:22 mithril input: HDA Intel Line In at Ext Left Jack as
/class/input/input8
Apr 15 23:20:22 mithril input: HDA Intel Mic at Ext Left Jack as /class/input/input9
Apr 15 23:20:22 mithril input: HDA Intel HP Out at Ext Left Jack as
/class/input/input10
hda-intel: IRQ timing workaround is activated for card #0. Suggest a bigger
bdl_pos_adj.
[-- Attachment #2: 2.6.29.png --]
[-- Type: image/png, Size: 14364 bytes --]
[-- Attachment #3: 2.6.30.png --]
[-- Type: image/png, Size: 14130 bytes --]
[-- Attachment #4: Type: text/plain, Size: 160 bytes --]
_______________________________________________
Alsa-devel mailing list
Alsa-devel@alsa-project.org
http://mailman.alsa-project.org/mailman/listinfo/alsa-devel
^ permalink raw reply [flat|nested] 7+ messages in thread
* Re: hda Regression: jack doesn't mute speaker
2009-04-15 22:01 hda Regression: jack doesn't mute speaker Ortwin Glück
@ 2009-04-16 6:18 ` Takashi Iwai
2009-04-16 7:05 ` Ortwin Glück
0 siblings, 1 reply; 7+ messages in thread
From: Takashi Iwai @ 2009-04-16 6:18 UTC (permalink / raw)
To: Ortwin Glück; +Cc: alsa-devel
At Thu, 16 Apr 2009 00:01:43 +0200,
Ortwin Glück wrote:
>
> Hi,
>
> Since 2.6.30-rc1 when I plug in headphones in the side jack the built-in
> speakers are not muted any more. Worked fine until 2.6.29.1.
What machine is it?
Could you give alsa-info.sh output (with --no-upload option)?
> Also the "Front"
> and "Surround" outputs are now both labeled "Speaker" (see attached images of kmix).
What I/O are they actually corresponding to? Are they speaker outputs
or line-outs, or anything else?
thanks,
Takashi
>
> lspci:
> 00:1b.0 Audio device: Intel Corporation 82801G (ICH7 Family) High Definition
> Audio Controller (rev 02)
>
>
>
> uname -a:
> Linux mithril 2.6.30-rc2 #2 SMP PREEMPT Wed Apr 15 22:51:36 CEST 2009 i686
> Intel(R) Core(TM)2 CPU T7600 @ 2.33GHz GenuineIntel GNU/Linux
>
> dmesg:
> HDA Intel 0000:00:1b.0: PCI INT A -> GSI 22 (level, low) -> IRQ 22
> HDA Intel 0000:00:1b.0: setting latency timer to 6
> hda_codec: STAC922x, Apple subsys_id=106b1a00
> input: HDA Intel Line In at Ext Left Jack as /class/input/input8
> input: HDA Intel Mic at Ext Left Jack as /class/input/input9
> hda-intel: IRQ timing workaround is activated for card #0. Suggest a bigger
> bdl_pos_adj.
>
>
>
>
> uname -a:
> Linux mithril 2.6.29.1 #3 SMP PREEMPT Wed Apr 15 23:03:20 CEST 2009 i686
> Intel(R) Core(TM)2 CPU T7600 @ 2.33GHz GenuineIntel GNU/Linux
>
> dmesg:
> HDA Intel 0000:00:1b.0: PCI INT A -> GSI 22 (level, low) -> IRQ 22
> HDA Intel 0000:00:1b.0: setting latency timer to 64
> hda_codec: STAC922x, Apple subsys_id=106b1a00
> Apr 15 23:20:22 mithril input: HDA Intel Line In at Ext Left Jack as
> /class/input/input8
> Apr 15 23:20:22 mithril input: HDA Intel Mic at Ext Left Jack as /class/input/input9
> Apr 15 23:20:22 mithril input: HDA Intel HP Out at Ext Left Jack as
> /class/input/input10
> hda-intel: IRQ timing workaround is activated for card #0. Suggest a bigger
> bdl_pos_adj.
>
>
>
^ permalink raw reply [flat|nested] 7+ messages in thread
* Re: hda Regression: jack doesn't mute speaker
2009-04-16 6:18 ` Takashi Iwai
@ 2009-04-16 7:05 ` Ortwin Glück
2009-04-16 7:12 ` Takashi Iwai
2009-04-16 7:31 ` Ortwin Glück
0 siblings, 2 replies; 7+ messages in thread
From: Ortwin Glück @ 2009-04-16 7:05 UTC (permalink / raw)
To: alsa-devel
[-- Attachment #1: Type: text/plain, Size: 2311 bytes --]
Takashi Iwai wrote:
> At Thu, 16 Apr 2009 00:01:43 +0200,
> Ortwin Glück wrote:
>> Hi,
>>
>> Since 2.6.30-rc1 when I plug in headphones in the side jack the built-in
>> speakers are not muted any more. Worked fine until 2.6.29.1.
>
> What machine is it?
> Could you give alsa-info.sh output (with --no-upload option)?
It's a MacBook Pro 2,1. Find the alsa-info attached.
>> Also the "Front"
>> and "Surround" outputs are now both labeled "Speaker" (see attached images of kmix).
>
> What I/O are they actually corresponding to? Are they speaker outputs
> or line-outs, or anything else?
They correspond to the built-in speakers.
The MacBook Pro has a headphone and a mic jack on the left side. The headphone
jack is also an optical output.
>
> thanks,
>
> Takashi
Thanks for looking into it.
Ortwin
>> lspci:
>> 00:1b.0 Audio device: Intel Corporation 82801G (ICH7 Family) High Definition
>> Audio Controller (rev 02)
>>
>>
>>
>> uname -a:
>> Linux mithril 2.6.30-rc2 #2 SMP PREEMPT Wed Apr 15 22:51:36 CEST 2009 i686
>> Intel(R) Core(TM)2 CPU T7600 @ 2.33GHz GenuineIntel GNU/Linux
>>
>> dmesg:
>> HDA Intel 0000:00:1b.0: PCI INT A -> GSI 22 (level, low) -> IRQ 22
>> HDA Intel 0000:00:1b.0: setting latency timer to 6
>> hda_codec: STAC922x, Apple subsys_id=106b1a00
>> input: HDA Intel Line In at Ext Left Jack as /class/input/input8
>> input: HDA Intel Mic at Ext Left Jack as /class/input/input9
>> hda-intel: IRQ timing workaround is activated for card #0. Suggest a bigger
>> bdl_pos_adj.
>>
>>
>>
>>
>> uname -a:
>> Linux mithril 2.6.29.1 #3 SMP PREEMPT Wed Apr 15 23:03:20 CEST 2009 i686
>> Intel(R) Core(TM)2 CPU T7600 @ 2.33GHz GenuineIntel GNU/Linux
>>
>> dmesg:
>> HDA Intel 0000:00:1b.0: PCI INT A -> GSI 22 (level, low) -> IRQ 22
>> HDA Intel 0000:00:1b.0: setting latency timer to 64
>> hda_codec: STAC922x, Apple subsys_id=106b1a00
>> Apr 15 23:20:22 mithril input: HDA Intel Line In at Ext Left Jack as
>> /class/input/input8
>> Apr 15 23:20:22 mithril input: HDA Intel Mic at Ext Left Jack as /class/input/input9
>> Apr 15 23:20:22 mithril input: HDA Intel HP Out at Ext Left Jack as
>> /class/input/input10
>> hda-intel: IRQ timing workaround is activated for card #0. Suggest a bigger
>> bdl_pos_adj.
[-- Attachment #2: alsa-info.txt --]
[-- Type: text/plain, Size: 18190 bytes --]
upload=true&script=true&cardinfo=
!!################################
!!ALSA Information Script v 0.4.56
!!################################
!!Script ran on: Thu Apr 16 06:58:37 UTC 2009
!!Linux Distribution
!!------------------
Gentoo Base System release 1.12.11.1
!!Kernel Information
!!------------------
Kernel release: 2.6.30-rc2
Operating System: GNU/Linux
Architecture: i686
Processor: Intel(R) Core(TM)2 CPU T7600 @ 2.33GHz
SMP Enabled: Yes
!!ALSA Version
!!------------
Driver version: 1.0.19
Library version: 1.0.17a
Utilities version: 1.0.17
!!Loaded ALSA modules
!!-------------------
!!Sound Servers on this system
!!----------------------------
Jack:
Installed - Yes (/usr/bin/jackd)
Running - No
!!Soundcards recognised by ALSA
!!-----------------------------
0 [Intel ]: HDA-Intel - HDA Intel
HDA Intel at 0x98400000 irq 22
!!PCI Soundcards installed in the system
!!--------------------------------------
00:1b.0 Audio device: Intel Corporation 82801G (ICH7 Family) High Definition Audio Controller (rev 02)
!!Advanced information - PCI Vendor/Device/Susbsystem ID's
!!--------------------------------------------------------
00:1b.0 0403: 8086:27d8 (rev 02)
Subsystem: 8384:7680
!!Modprobe options (Sound related)
!!--------------------------------
snd-hda-intel: position_fix=1 model=macbook-pro
snd-hda-intel: position_fix=1 model=macbook-pro
!!Loaded sound module options
!!--------------------------
!!HDA-Intel Codec information
!!---------------------------
--startcollapse--
Codec: SigmaTel STAC9221 A1
Address: 0
Function Id: 0x1
Vendor Id: 0x83847680
Subsystem Id: 0x106b1a00
Revision Id: 0x103401
No Modem Function Group found
Default PCM:
rates [0x7e0]: 44100 48000 88200 96000 176400 192000
bits [0xe]: 16 20 24
formats [0x1]: PCM
Default Amp-In caps: ofs=0x00, nsteps=0x0e, stepsize=0x05, mute=1
Default Amp-Out caps: ofs=0x7f, nsteps=0x7f, stepsize=0x02, mute=1
GPIO: io=4, o=0, i=0, unsolicited=1, wake=1
IO[0]: enable=0, dir=0, wake=0, sticky=0, data=0, unsol=0
IO[1]: enable=0, dir=0, wake=0, sticky=0, data=0, unsol=0
IO[2]: enable=0, dir=0, wake=0, sticky=0, data=0, unsol=0
IO[3]: enable=0, dir=0, wake=0, sticky=0, data=0, unsol=0
Node 0x02 [Audio Output] wcaps 0xd0c05: Stereo Amp-Out R/L
Amp-Out caps: N/A
Amp-Out vals: [0x7f 0x7f]
Converter: stream=0, channel=0
Power: setting=D0, actual=D0
Delay: 13 samples
Node 0x03 [Audio Output] wcaps 0xd0c05: Stereo Amp-Out R/L
Amp-Out caps: N/A
Amp-Out vals: [0x00 0x00]
Converter: stream=0, channel=0
Power: setting=D0, actual=D0
Delay: 13 samples
Node 0x04 [Audio Output] wcaps 0xd0c05: Stereo Amp-Out R/L
Amp-Out caps: N/A
Amp-Out vals: [0xff 0xff]
Converter: stream=0, channel=0
Power: setting=D0, actual=D0
Delay: 13 samples
Node 0x05 [Audio Output] wcaps 0xd0c05: Stereo Amp-Out R/L
Amp-Out caps: N/A
Amp-Out vals: [0xff 0xff]
Converter: stream=0, channel=0
Power: setting=D0, actual=D0
Delay: 13 samples
Node 0x06 [Audio Input] wcaps 0x1d0541: Stereo
Converter: stream=0, channel=0
SDI-Select: 0
Power: setting=D0, actual=D0
Delay: 13 samples
Connection: 1
0x17
Processing caps: benign=0, ncoeff=0
Node 0x07 [Audio Input] wcaps 0x1d0541: Stereo
Converter: stream=0, channel=0
SDI-Select: 0
Power: setting=D0, actual=D0
Delay: 13 samples
Connection: 1
0x18
Processing caps: benign=0, ncoeff=0
Node 0x08 [Audio Output] wcaps 0x40211: Stereo Digital
Converter: stream=0, channel=0
Digital: Enabled
Digital category: 0x0
PCM:
rates [0x7e0]: 44100 48000 88200 96000 176400 192000
bits [0xe]: 16 20 24
formats [0x5]: PCM AC3
Delay: 4 samples
Node 0x09 [Audio Input] wcaps 0x140311: Stereo Digital
Converter: stream=0, channel=0
SDI-Select: 0
Digital:
Digital category: 0x0
PCM:
rates [0x160]: 44100 48000 96000
bits [0xe]: 16 20 24
formats [0x5]: PCM AC3
Delay: 4 samples
Connection: 1
0x11
Node 0x0a [Pin Complex] wcaps 0x400181: Stereo
Pincap 0x0000173f: IN OUT HP Detect Trigger ImpSense
Vref caps: HIZ 50 GRD 80
Pin Default 0x0121e21f: [Jack] HP Out at Ext Rear
Conn = 1/8, Color = White
DefAssociation = 0x1, Sequence = 0xf
Pin-ctls: 0xc0: OUT HP VREF_HIZ
Unsolicited: tag=01, enabled=1
Connection: 1
0x02
Node 0x0b [Pin Complex] wcaps 0x400181: Stereo
Pincap 0x00001737: IN OUT Detect Trigger ImpSense
Vref caps: HIZ 50 GRD 80
Pin Default 0x90a7012e: [Fixed] Mic at Int N/A
Conn = Analog, Color = Unknown
DefAssociation = 0x2, Sequence = 0xe
Misc = NO_PRESENCE
Pin-ctls: 0x24: IN VREF_80
Unsolicited: tag=00, enabled=0
Connection: 1
0x04
Node 0x0c [Pin Complex] wcaps 0x400181: Stereo
Pincap 0x00001737: IN OUT Detect Trigger ImpSense
Vref caps: HIZ 50 GRD 80
Pin Default 0x9017e110: [Fixed] Speaker at Int N/A
Conn = Analog, Color = White
DefAssociation = 0x1, Sequence = 0x0
Misc = NO_PRESENCE
Pin-ctls: 0x40: OUT VREF_HIZ
Unsolicited: tag=00, enabled=0
Connection: 1
0x03
Node 0x0d [Pin Complex] wcaps 0x400181: Stereo
Pincap 0x0000173f: IN OUT HP Detect Trigger ImpSense
Vref caps: HIZ 50 GRD 80
Pin Default 0x400000fd: [N/A] Line Out at Ext N/A
Conn = Unknown, Color = Unknown
DefAssociation = 0xf, Sequence = 0xd
Pin-ctls: 0x40: OUT VREF_HIZ
Unsolicited: tag=00, enabled=0
Connection: 1
0x02
Node 0x0e [Pin Complex] wcaps 0x400081: Stereo
Pincap 0x00000024: IN Detect
Pin Default 0x400000fe: [N/A] Line Out at Ext N/A
Conn = Unknown, Color = Unknown
DefAssociation = 0xf, Sequence = 0xe
Pin-ctls: 0x20: IN
Unsolicited: tag=00, enabled=0
Node 0x0f [Pin Complex] wcaps 0x400181: Stereo
Pincap 0x00000037: IN OUT Detect Trigger ImpSense
Pin Default 0x0181e020: [Jack] Line In at Ext Rear
Conn = 1/8, Color = White
DefAssociation = 0x2, Sequence = 0x0
Pin-ctls: 0x60: IN OUT
Unsolicited: tag=02, enabled=1
Connection: 1
0x05
Node 0x10 [Pin Complex] wcaps 0x400301: Stereo Digital
Pincap 0x00000010: OUT
Pin Default 0x1145e230: [Jack] SPDIF Out at Int Rear
Conn = Optical, Color = White
DefAssociation = 0x3, Sequence = 0x0
Pin-ctls: 0x40: OUT
Connection: 3
0x08* 0x17 0x19
Node 0x11 [Pin Complex] wcaps 0x430681: Stereo Digital
Pincap 0x00010024: IN EAPD Detect
EAPD 0x0:
Pin Default 0x11c5e240: [Jack] SPDIF In at Int Rear
Conn = Optical, Color = White
DefAssociation = 0x4, Sequence = 0x0
Pin-ctls: 0x20: IN
Unsolicited: tag=00, enabled=0
Power: setting=D0, actual=D0
Delay: 3 samples
Node 0x12 [Audio Selector] wcaps 0x30010d: Stereo Amp-Out
Amp-Out caps: ofs=0x00, nsteps=0x04, stepsize=0x27, mute=0
Amp-Out vals: [0x02 0x02]
Connection: 7
0x0e 0x15 0x0f 0x0b* 0x0c 0x0d 0x0a
Node 0x13 [Audio Selector] wcaps 0x30010d: Stereo Amp-Out
Amp-Out caps: ofs=0x00, nsteps=0x04, stepsize=0x27, mute=0
Amp-Out vals: [0x00 0x00]
Connection: 7
0x0e 0x15 0x0f 0x0b* 0x0c 0x0d 0x0a
Node 0x14 [Beep Generator Widget] wcaps 0x70000c: Mono Amp-Out
Amp-Out caps: ofs=0x03, nsteps=0x03, stepsize=0x17, mute=0
Amp-Out vals: [0x00]
Node 0x15 [Pin Complex] wcaps 0x400001: Stereo
Pincap 0x00000020: IN
Pin Default 0x400000fc: [N/A] Line Out at Ext N/A
Conn = Unknown, Color = Unknown
DefAssociation = 0xf, Sequence = 0xc
Pin-ctls: 0x00:
Node 0x16 [Volume Knob Widget] wcaps 0x600000: Mono
Volume-Knob: delta=1, steps=127, direct=1, val=127
Connection: 4
0x02 0x03 0x04 0x05
Node 0x17 [Audio Selector] wcaps 0x300903: Stereo Amp-In R/L
Amp-In caps: N/A
Amp-In vals: [0x8e 0x8e]
Connection: 1
0x12
Node 0x18 [Audio Selector] wcaps 0x300903: Stereo Amp-In R/L
Amp-In caps: N/A
Amp-In vals: [0x00 0x00]
Connection: 1
0x13
Node 0x19 [Vendor Defined Widget] wcaps 0xf30201: Stereo Digital
Delay: 3 samples
Node 0x1a [Audio Output] wcaps 0x30201: Stereo Digital
Converter: stream=0, channel=0
Digital:
Digital category: 0x0
Delay: 3 samples
Node 0x1b [Pin Complex] wcaps 0x400301: Stereo Digital
Pincap 0x00000010: OUT
Pin Default 0x400000fb: [N/A] Line Out at Ext N/A
Conn = Unknown, Color = Unknown
DefAssociation = 0xf, Sequence = 0xb
Pin-ctls: 0x00:
Connection: 1
0x1a
--endcollapse--
!!ALSA Device nodes
!!-----------------
crw-rw---- 1 root audio 116, 0 Apr 16 08:54 /dev/snd/controlC0
crw-rw---- 1 root audio 116, 24 Apr 16 08:54 /dev/snd/pcmC0D0c
crw-rw---- 1 root audio 116, 16 Apr 16 08:54 /dev/snd/pcmC0D0p
crw-rw---- 1 root audio 116, 25 Apr 16 08:54 /dev/snd/pcmC0D1c
crw-rw---- 1 root audio 116, 17 Apr 16 08:54 /dev/snd/pcmC0D1p
crw-rw---- 1 root audio 116, 1 Apr 16 08:54 /dev/snd/seq
crw-rw---- 1 root audio 116, 33 Apr 16 08:54 /dev/snd/timer
!!Aplay/Arecord output
!!------------
APLAY
**** List of PLAYBACK Hardware Devices ****
card 0: Intel [HDA Intel], device 0: STAC92xx Analog [STAC92xx Analog]
Subdevices: 1/1
Subdevice #0: subdevice #0
card 0: Intel [HDA Intel], device 1: STAC92xx Digital [STAC92xx Digital]
Subdevices: 1/1
Subdevice #0: subdevice #0
ARECORD
**** List of CAPTURE Hardware Devices ****
card 0: Intel [HDA Intel], device 0: STAC92xx Analog [STAC92xx Analog]
Subdevices: 2/2
Subdevice #0: subdevice #0
Subdevice #1: subdevice #1
card 0: Intel [HDA Intel], device 1: STAC92xx Digital [STAC92xx Digital]
Subdevices: 1/1
Subdevice #0: subdevice #0
!!Amixer output
!!-------------
!!-------Mixer controls for card 0 [Intel]
Card hw:0 'Intel'/'HDA Intel at 0x98400000 irq 22'
Mixer name : 'SigmaTel STAC9221 A1'
Components : 'HDA:83847680,106b1a00,00103401'
Controls : 23
Simple ctrls : 13
Simple mixer control 'Master',0
Capabilities: pvolume pvolume-joined pswitch pswitch-joined
Playback channels: Mono
Limits: Playback 0 - 64
Mono: Playback 64 [100%] [0.00dB] [on]
Simple mixer control 'Headphone',0
Capabilities: pvolume pswitch
Playback channels: Front Left - Front Right
Limits: Playback 0 - 64
Mono:
Front Left: Playback 64 [100%] [0.00dB] [on]
Front Right: Playback 64 [100%] [0.00dB] [on]
Simple mixer control 'PCM',0
Capabilities: pvolume
Playback channels: Front Left - Front Right
Limits: Playback 0 - 255
Mono:
Front Left: Playback 127 [50%] [-25.60dB]
Front Right: Playback 127 [50%] [-25.60dB]
Simple mixer control 'IEC958',0
Capabilities: pswitch pswitch-joined cswitch cswitch-joined
Playback channels: Mono
Capture channels: Mono
Mono: Playback [on] Capture [off]
Simple mixer control 'IEC958 Default PCM',0
Capabilities: pswitch pswitch-joined
Playback channels: Mono
Mono: Playback [off]
Simple mixer control 'Capture',0
Capabilities: cvolume cswitch
Capture channels: Front Left - Front Right
Limits: Capture 0 - 14
Front Left: Capture 14 [100%] [21.00dB] [off]
Front Right: Capture 14 [100%] [21.00dB] [off]
Simple mixer control 'Capture',1
Capabilities: cvolume cswitch
Capture channels: Front Left - Front Right
Limits: Capture 0 - 14
Front Left: Capture 0 [0%] [0.00dB] [on]
Front Right: Capture 0 [0%] [0.00dB] [on]
Simple mixer control 'Digital',0
Capabilities: cvolume
Capture channels: Front Left - Front Right
Limits: Capture 0 - 120
Front Left: Capture 0 [0%] [-30.00dB]
Front Right: Capture 0 [0%] [-30.00dB]
Simple mixer control 'Input Source',0
Capabilities: cenum
Items: 'Mic' 'Line'
Item0: 'Mic'
Simple mixer control 'Input Source',1
Capabilities: cenum
Items: 'Mic' 'Line'
Item0: 'Mic'
Simple mixer control 'Mux',0
Capabilities: cvolume
Capture channels: Front Left - Front Right
Limits: Capture 0 - 2
Front Left: Capture 2 [100%] [20.00dB]
Front Right: Capture 2 [100%] [20.00dB]
Simple mixer control 'Mux',1
Capabilities: cvolume
Capture channels: Front Left - Front Right
Limits: Capture 0 - 4
Front Left: Capture 0 [0%] [0.00dB]
Front Right: Capture 0 [0%] [0.00dB]
Simple mixer control 'Speaker',0
Capabilities: pvolume pswitch
Playback channels: Front Left - Front Right
Limits: Playback 0 - 64
Mono:
Front Left: Playback 0 [0%] [-48.00dB] [on]
Front Right: Playback 0 [0%] [-48.00dB] [on]
!!Alsactl output
!!-------------
--startcollapse--
state.Intel {
control.1 {
comment.access 'read write'
comment.type INTEGER
comment.count 2
comment.range '0 - 14'
comment.dbmin 0
comment.dbmax 2100
iface MIXER
name 'Capture Volume'
value.0 14
value.1 14
}
control.2 {
comment.access 'read write'
comment.type BOOLEAN
comment.count 2
iface MIXER
name 'Capture Switch'
value.0 false
value.1 false
}
control.3 {
comment.access 'read write'
comment.type INTEGER
comment.count 2
comment.range '0 - 14'
comment.dbmin 0
comment.dbmax 2100
iface MIXER
name 'Capture Volume'
index 1
value.0 0
value.1 0
}
control.4 {
comment.access 'read write'
comment.type BOOLEAN
comment.count 2
iface MIXER
name 'Capture Switch'
index 1
value.0 true
value.1 true
}
control.5 {
comment.access 'read write'
comment.type INTEGER
comment.count 2
comment.range '0 - 64'
comment.dbmin -4800
comment.dbmax 0
iface MIXER
name 'Speaker Playback Volume'
value.0 0
value.1 0
}
control.6 {
comment.access 'read write'
comment.type BOOLEAN
comment.count 2
iface MIXER
name 'Speaker Playback Switch'
value.0 true
value.1 true
}
control.7 {
comment.access 'read write'
comment.type INTEGER
comment.count 2
comment.range '0 - 64'
comment.dbmin -4800
comment.dbmax 0
iface MIXER
name 'Headphone Playback Volume'
value.0 64
value.1 64
}
control.8 {
comment.access 'read write'
comment.type BOOLEAN
comment.count 2
iface MIXER
name 'Headphone Playback Switch'
value.0 true
value.1 true
}
control.9 {
comment.access 'read write'
comment.type INTEGER
comment.count 2
comment.range '0 - 2'
comment.dbmin 0
comment.dbmax 2000
iface MIXER
name 'Mux Capture Volume'
value.0 2
value.1 2
}
control.10 {
comment.access 'read write'
comment.type INTEGER
comment.count 2
comment.range '0 - 4'
comment.dbmin 0
comment.dbmax 4000
iface MIXER
name 'Mux Capture Volume'
index 1
value.0 0
value.1 0
}
control.11 {
comment.access 'read write'
comment.type ENUMERATED
comment.count 1
comment.item.0 Mic
comment.item.1 Line
iface MIXER
name 'Input Source'
value Mic
}
control.12 {
comment.access 'read write'
comment.type ENUMERATED
comment.count 1
comment.item.0 Mic
comment.item.1 Line
iface MIXER
name 'Input Source'
index 1
value Mic
}
control.13 {
comment.access read
comment.type IEC958
comment.count 1
iface MIXER
name 'IEC958 Playback Con Mask'
value '0fff000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000'
}
control.14 {
comment.access read
comment.type IEC958
comment.count 1
iface MIXER
name 'IEC958 Playback Pro Mask'
value '0f00000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000'
}
control.15 {
comment.access 'read write'
comment.type IEC958
comment.count 1
iface MIXER
name 'IEC958 Playback Default'
value '0400000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000'
}
control.16 {
comment.access 'read write'
comment.type BOOLEAN
comment.count 1
iface MIXER
name 'IEC958 Playback Switch'
value true
}
control.17 {
comment.access 'read write'
comment.type BOOLEAN
comment.count 1
iface MIXER
name 'IEC958 Default PCM Playback Switch'
value false
}
control.18 {
comment.access 'read write'
comment.type BOOLEAN
comment.count 1
iface MIXER
name 'IEC958 Capture Switch'
value false
}
control.19 {
comment.access read
comment.type IEC958
comment.count 1
iface MIXER
name 'IEC958 Capture Default'
value '0400000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000'
}
control.20 {
comment.access 'read write'
comment.type INTEGER
comment.count 1
comment.range '0 - 64'
comment.dbmin -4800
comment.dbmax 0
iface MIXER
name 'Master Playback Volume'
value 64
}
control.21 {
comment.access 'read write'
comment.type BOOLEAN
comment.count 1
iface MIXER
name 'Master Playback Switch'
value true
}
control.22 {
comment.access 'read write user'
comment.type INTEGER
comment.count 2
comment.range '0 - 255'
comment.tlv '0000000100000008ffffec1400000014'
comment.dbmin -5100
comment.dbmax 0
iface MIXER
name 'PCM Playback Volume'
value.0 127
value.1 127
}
control.23 {
comment.access 'read write user'
comment.type INTEGER
comment.count 2
comment.range '0 - 120'
comment.tlv '0000000100000008fffff44800000032'
comment.dbmin -3000
comment.dbmax 3000
iface MIXER
name 'Digital Capture Volume'
value.0 0
value.1 0
}
}
--endcollapse--
!!All Loaded Modules
!!------------------
Module
rfcomm
radeon
drm
ip6t_LOG
nf_conntrack_ipv6
ip6table_filter
ip6_tables
ipv6
uvcvideo
videodev
v4l1_compat
isight_firmware
snd_hda_codec_idt
snd_hda_intel
snd_hda_codec
ohci1394
appletouch
[-- Attachment #3: Type: text/plain, Size: 160 bytes --]
_______________________________________________
Alsa-devel mailing list
Alsa-devel@alsa-project.org
http://mailman.alsa-project.org/mailman/listinfo/alsa-devel
^ permalink raw reply [flat|nested] 7+ messages in thread
* Re: hda Regression: jack doesn't mute speaker
2009-04-16 7:05 ` Ortwin Glück
@ 2009-04-16 7:12 ` Takashi Iwai
[not found] ` <49E6DCED.90804@odi.ch>
2009-04-16 7:31 ` Ortwin Glück
1 sibling, 1 reply; 7+ messages in thread
From: Takashi Iwai @ 2009-04-16 7:12 UTC (permalink / raw)
To: Ortwin Glück; +Cc: alsa-devel
At Thu, 16 Apr 2009 09:05:36 +0200,
Ortwin Glück wrote:
>
> Takashi Iwai wrote:
> > At Thu, 16 Apr 2009 00:01:43 +0200,
> > Ortwin Glück wrote:
> >> Hi,
> >>
> >> Since 2.6.30-rc1 when I plug in headphones in the side jack the built-in
> >> speakers are not muted any more. Worked fine until 2.6.29.1.
> >
> > What machine is it?
> > Could you give alsa-info.sh output (with --no-upload option)?
>
> It's a MacBook Pro 2,1. Find the alsa-info attached.
>
> >> Also the "Front"
> >> and "Surround" outputs are now both labeled "Speaker" (see attached images of kmix).
> >
> > What I/O are they actually corresponding to? Are they speaker outputs
> > or line-outs, or anything else?
>
> They correspond to the built-in speakers.
So they are really front/surround 4.0-speaker outputs?
Takashi
^ permalink raw reply [flat|nested] 7+ messages in thread
* Re: hda Regression: jack doesn't mute speaker
2009-04-16 7:05 ` Ortwin Glück
2009-04-16 7:12 ` Takashi Iwai
@ 2009-04-16 7:31 ` Ortwin Glück
1 sibling, 0 replies; 7+ messages in thread
From: Ortwin Glück @ 2009-04-16 7:31 UTC (permalink / raw)
To: alsa-devel
[-- Attachment #1: Type: text/plain, Size: 509 bytes --]
Ortwin Glück wrote:
> It's a MacBook Pro 2,1. Find the alsa-info attached.
Oh, ignore the module option. I had added that one just for now, but that gives
me a "Headphone" and "Speaker" control and no sound at all.
Well, I have removed the module option again, and also deleted the two files in
/var/lib/alsa. Now I get slightly different controls, same misbehaviour with the
jack though. (No idea what these "Mux" things are supposed to do, they appear to
have no effect.)
Ortwin
[-- Attachment #2: 2.6.30.png --]
[-- Type: image/png, Size: 13003 bytes --]
[-- Attachment #3: alsa-info.txt --]
[-- Type: text/plain, Size: 16945 bytes --]
upload=true&script=true&cardinfo=
!!################################
!!ALSA Information Script v 0.4.56
!!################################
!!Script ran on: Thu Apr 16 07:30:13 UTC 2009
!!Linux Distribution
!!------------------
Gentoo Base System release 1.12.11.1
!!Kernel Information
!!------------------
Kernel release: 2.6.30-rc2
Operating System: GNU/Linux
Architecture: i686
Processor: Intel(R) Core(TM)2 CPU T7600 @ 2.33GHz
SMP Enabled: Yes
!!ALSA Version
!!------------
Driver version: 1.0.19
Library version: 1.0.17a
Utilities version: 1.0.17
!!Loaded ALSA modules
!!-------------------
!!Sound Servers on this system
!!----------------------------
Jack:
Installed - Yes (/usr/bin/jackd)
Running - No
!!Soundcards recognised by ALSA
!!-----------------------------
0 [Intel ]: HDA-Intel - HDA Intel
HDA Intel at 0x98400000 irq 22
!!PCI Soundcards installed in the system
!!--------------------------------------
00:1b.0 Audio device: Intel Corporation 82801G (ICH7 Family) High Definition Audio Controller (rev 02)
!!Advanced information - PCI Vendor/Device/Susbsystem ID's
!!--------------------------------------------------------
00:1b.0 0403: 8086:27d8 (rev 02)
Subsystem: 8384:7680
!!Modprobe options (Sound related)
!!--------------------------------
snd-hda-intel: position_fix=1
snd-hda-intel: position_fix=1
!!Loaded sound module options
!!--------------------------
!!HDA-Intel Codec information
!!---------------------------
--startcollapse--
Codec: SigmaTel STAC9221 A1
Address: 0
Function Id: 0x1
Vendor Id: 0x83847680
Subsystem Id: 0x106b1a00
Revision Id: 0x103401
No Modem Function Group found
Default PCM:
rates [0x7e0]: 44100 48000 88200 96000 176400 192000
bits [0xe]: 16 20 24
formats [0x1]: PCM
Default Amp-In caps: ofs=0x00, nsteps=0x0e, stepsize=0x05, mute=1
Default Amp-Out caps: ofs=0x7f, nsteps=0x7f, stepsize=0x02, mute=1
GPIO: io=4, o=0, i=0, unsolicited=1, wake=1
IO[0]: enable=1, dir=1, wake=0, sticky=0, data=1, unsol=0
IO[1]: enable=1, dir=1, wake=0, sticky=0, data=1, unsol=0
IO[2]: enable=0, dir=0, wake=0, sticky=0, data=0, unsol=0
IO[3]: enable=0, dir=0, wake=0, sticky=0, data=0, unsol=0
Node 0x02 [Audio Output] wcaps 0xd0c05: Stereo Amp-Out R/L
Amp-Out caps: N/A
Amp-Out vals: [0x6a 0x6a]
Converter: stream=0, channel=0
Power: setting=D0, actual=D0
Delay: 13 samples
Node 0x03 [Audio Output] wcaps 0xd0c05: Stereo Amp-Out R/L
Amp-Out caps: N/A
Amp-Out vals: [0x6a 0x6a]
Converter: stream=0, channel=0
Power: setting=D0, actual=D0
Delay: 13 samples
Node 0x04 [Audio Output] wcaps 0xd0c05: Stereo Amp-Out R/L
Amp-Out caps: N/A
Amp-Out vals: [0xff 0xff]
Converter: stream=0, channel=0
Power: setting=D0, actual=D0
Delay: 13 samples
Node 0x05 [Audio Output] wcaps 0xd0c05: Stereo Amp-Out R/L
Amp-Out caps: N/A
Amp-Out vals: [0xff 0xff]
Converter: stream=0, channel=0
Power: setting=D0, actual=D0
Delay: 13 samples
Node 0x06 [Audio Input] wcaps 0x1d0541: Stereo
Converter: stream=0, channel=0
SDI-Select: 0
Power: setting=D0, actual=D0
Delay: 13 samples
Connection: 1
0x17
Processing caps: benign=0, ncoeff=0
Node 0x07 [Audio Input] wcaps 0x1d0541: Stereo
Converter: stream=0, channel=0
SDI-Select: 0
Power: setting=D0, actual=D0
Delay: 13 samples
Connection: 1
0x18
Processing caps: benign=0, ncoeff=0
Node 0x08 [Audio Output] wcaps 0x40211: Stereo Digital
Converter: stream=0, channel=0
Digital:
Digital category: 0x0
PCM:
rates [0x7e0]: 44100 48000 88200 96000 176400 192000
bits [0xe]: 16 20 24
formats [0x5]: PCM AC3
Delay: 4 samples
Node 0x09 [Audio Input] wcaps 0x140311: Stereo Digital
Converter: stream=0, channel=0
SDI-Select: 0
Digital:
Digital category: 0x0
PCM:
rates [0x160]: 44100 48000 96000
bits [0xe]: 16 20 24
formats [0x5]: PCM AC3
Delay: 4 samples
Connection: 1
0x11
Node 0x0a [Pin Complex] wcaps 0x400181: Stereo
Pincap 0x0000173f: IN OUT HP Detect Trigger ImpSense
Vref caps: HIZ 50 GRD 80
Pin Default 0x0321e21f: [Jack] HP Out at Ext Left
Conn = 1/8, Color = White
DefAssociation = 0x1, Sequence = 0xf
Pin-ctls: 0xc0: OUT HP VREF_HIZ
Unsolicited: tag=00, enabled=0
Connection: 1
0x02
Node 0x0b [Pin Complex] wcaps 0x400181: Stereo
Pincap 0x00001737: IN OUT Detect Trigger ImpSense
Vref caps: HIZ 50 GRD 80
Pin Default 0x03a1e02e: [Jack] Mic at Ext Left
Conn = 1/8, Color = White
DefAssociation = 0x2, Sequence = 0xe
Pin-ctls: 0x24: IN VREF_80
Unsolicited: tag=01, enabled=1
Connection: 1
0x04
Node 0x0c [Pin Complex] wcaps 0x400181: Stereo
Pincap 0x00001737: IN OUT Detect Trigger ImpSense
Vref caps: HIZ 50 GRD 80
Pin Default 0x9017e110: [Fixed] Speaker at Int N/A
Conn = Analog, Color = White
DefAssociation = 0x1, Sequence = 0x0
Misc = NO_PRESENCE
Pin-ctls: 0x40: OUT VREF_HIZ
Unsolicited: tag=00, enabled=0
Connection: 1
0x03
Node 0x0d [Pin Complex] wcaps 0x400181: Stereo
Pincap 0x0000173f: IN OUT HP Detect Trigger ImpSense
Vref caps: HIZ 50 GRD 80
Pin Default 0x9017e11f: [Fixed] Speaker at Int N/A
Conn = Analog, Color = White
DefAssociation = 0x1, Sequence = 0xf
Misc = NO_PRESENCE
Pin-ctls: 0x40: OUT VREF_HIZ
Unsolicited: tag=00, enabled=0
Connection: 1
0x02
Node 0x0e [Pin Complex] wcaps 0x400081: Stereo
Pincap 0x00000024: IN Detect
Pin Default 0x400000fe: [N/A] Line Out at Ext N/A
Conn = Unknown, Color = Unknown
DefAssociation = 0xf, Sequence = 0xe
Pin-ctls: 0x20: IN
Unsolicited: tag=00, enabled=0
Node 0x0f [Pin Complex] wcaps 0x400181: Stereo
Pincap 0x00000037: IN OUT Detect Trigger ImpSense
Pin Default 0x0381e020: [Jack] Line In at Ext Left
Conn = 1/8, Color = White
DefAssociation = 0x2, Sequence = 0x0
Pin-ctls: 0x60: IN OUT
Unsolicited: tag=02, enabled=1
Connection: 1
0x05
Node 0x10 [Pin Complex] wcaps 0x400301: Stereo Digital
Pincap 0x00000010: OUT
Pin Default 0x1345e230: [Jack] SPDIF Out at Int Left
Conn = Optical, Color = White
DefAssociation = 0x3, Sequence = 0x0
Pin-ctls: 0x40: OUT
Connection: 3
0x08* 0x17 0x19
Node 0x11 [Pin Complex] wcaps 0x430681: Stereo Digital
Pincap 0x00010024: IN EAPD Detect
EAPD 0x0:
Pin Default 0x13c5e240: [Jack] SPDIF In at Int Left
Conn = Optical, Color = White
DefAssociation = 0x4, Sequence = 0x0
Pin-ctls: 0x20: IN
Unsolicited: tag=00, enabled=0
Power: setting=D0, actual=D0
Delay: 3 samples
Node 0x12 [Audio Selector] wcaps 0x30010d: Stereo Amp-Out
Amp-Out caps: ofs=0x00, nsteps=0x04, stepsize=0x27, mute=0
Amp-Out vals: [0x00 0x00]
Connection: 7
0x0e 0x15 0x0f 0x0b* 0x0c 0x0d 0x0a
Node 0x13 [Audio Selector] wcaps 0x30010d: Stereo Amp-Out
Amp-Out caps: ofs=0x00, nsteps=0x04, stepsize=0x27, mute=0
Amp-Out vals: [0x00 0x00]
Connection: 7
0x0e 0x15 0x0f 0x0b* 0x0c 0x0d 0x0a
Node 0x14 [Beep Generator Widget] wcaps 0x70000c: Mono Amp-Out
Amp-Out caps: ofs=0x03, nsteps=0x03, stepsize=0x17, mute=0
Amp-Out vals: [0x00]
Node 0x15 [Pin Complex] wcaps 0x400001: Stereo
Pincap 0x00000020: IN
Pin Default 0x400000fc: [N/A] Line Out at Ext N/A
Conn = Unknown, Color = Unknown
DefAssociation = 0xf, Sequence = 0xc
Pin-ctls: 0x00:
Node 0x16 [Volume Knob Widget] wcaps 0x600000: Mono
Volume-Knob: delta=1, steps=127, direct=1, val=127
Connection: 4
0x02 0x03 0x04 0x05
Node 0x17 [Audio Selector] wcaps 0x300903: Stereo Amp-In R/L
Amp-In caps: N/A
Amp-In vals: [0x00 0x00]
Connection: 1
0x12
Node 0x18 [Audio Selector] wcaps 0x300903: Stereo Amp-In R/L
Amp-In caps: N/A
Amp-In vals: [0x80 0x80]
Connection: 1
0x13
Node 0x19 [Vendor Defined Widget] wcaps 0xf30201: Stereo Digital
Delay: 3 samples
Node 0x1a [Audio Output] wcaps 0x30201: Stereo Digital
Converter: stream=0, channel=0
Digital:
Digital category: 0x0
Delay: 3 samples
Node 0x1b [Pin Complex] wcaps 0x400301: Stereo Digital
Pincap 0x00000010: OUT
Pin Default 0x400000fb: [N/A] Line Out at Ext N/A
Conn = Unknown, Color = Unknown
DefAssociation = 0xf, Sequence = 0xb
Pin-ctls: 0x00:
Connection: 1
0x1a
--endcollapse--
!!ALSA Device nodes
!!-----------------
crw-rw---- 1 root audio 116, 0 Apr 16 09:24 /dev/snd/controlC0
crw-rw---- 1 root audio 116, 24 Apr 16 09:24 /dev/snd/pcmC0D0c
crw-rw---- 1 root audio 116, 16 Apr 16 09:26 /dev/snd/pcmC0D0p
crw-rw---- 1 root audio 116, 25 Apr 16 09:24 /dev/snd/pcmC0D1c
crw-rw---- 1 root audio 116, 17 Apr 16 09:24 /dev/snd/pcmC0D1p
crw-rw---- 1 root audio 116, 1 Apr 16 09:24 /dev/snd/seq
crw-rw---- 1 root audio 116, 33 Apr 16 09:24 /dev/snd/timer
!!Aplay/Arecord output
!!------------
APLAY
**** List of PLAYBACK Hardware Devices ****
card 0: Intel [HDA Intel], device 0: STAC92xx Analog [STAC92xx Analog]
Subdevices: 1/1
Subdevice #0: subdevice #0
card 0: Intel [HDA Intel], device 1: STAC92xx Digital [STAC92xx Digital]
Subdevices: 1/1
Subdevice #0: subdevice #0
ARECORD
**** List of CAPTURE Hardware Devices ****
card 0: Intel [HDA Intel], device 0: STAC92xx Analog [STAC92xx Analog]
Subdevices: 2/2
Subdevice #0: subdevice #0
Subdevice #1: subdevice #1
card 0: Intel [HDA Intel], device 1: STAC92xx Digital [STAC92xx Digital]
Subdevices: 1/1
Subdevice #0: subdevice #0
!!Amixer output
!!-------------
!!-------Mixer controls for card 0 [Intel]
Card hw:0 'Intel'/'HDA Intel at 0x98400000 irq 22'
Mixer name : 'SigmaTel STAC9221 A1'
Components : 'HDA:83847680,106b1a00,00103401'
Controls : 20
Simple ctrls : 12
Simple mixer control 'Master',0
Capabilities: pvolume pvolume-joined pswitch pswitch-joined
Playback channels: Mono
Limits: Playback 0 - 64
Mono: Playback 43 [67%] [-15.75dB] [on]
Simple mixer control 'PCM',0
Capabilities: pvolume
Playback channels: Front Left - Front Right
Limits: Playback 0 - 255
Mono:
Front Left: Playback 255 [100%] [0.00dB]
Front Right: Playback 255 [100%] [0.00dB]
Simple mixer control 'IEC958',0
Capabilities: pswitch pswitch-joined
Playback channels: Mono
Mono: Playback [off]
Simple mixer control 'IEC958 Default PCM',0
Capabilities: pswitch pswitch-joined
Playback channels: Mono
Mono: Playback [on]
Simple mixer control 'Capture',0
Capabilities: cvolume cswitch
Capture channels: Front Left - Front Right
Limits: Capture 0 - 14
Front Left: Capture 0 [0%] [0.00dB] [on]
Front Right: Capture 0 [0%] [0.00dB] [on]
Simple mixer control 'Capture',1
Capabilities: cvolume cswitch
Capture channels: Front Left - Front Right
Limits: Capture 0 - 14
Front Left: Capture 0 [0%] [0.00dB] [off]
Front Right: Capture 0 [0%] [0.00dB] [off]
Simple mixer control 'Input Source',0
Capabilities: cenum
Items: 'Mic' 'Line'
Item0: 'Mic'
Simple mixer control 'Input Source',1
Capabilities: cenum
Items: 'Mic' 'Line'
Item0: 'Mic'
Simple mixer control 'Mux',0
Capabilities: cvolume
Capture channels: Front Left - Front Right
Limits: Capture 0 - 2
Front Left: Capture 0 [0%] [0.00dB]
Front Right: Capture 0 [0%] [0.00dB]
Simple mixer control 'Mux',1
Capabilities: cvolume
Capture channels: Front Left - Front Right
Limits: Capture 0 - 4
Front Left: Capture 0 [0%] [0.00dB]
Front Right: Capture 0 [0%] [0.00dB]
Simple mixer control 'Speaker',0
Capabilities: pvolume pswitch
Playback channels: Front Left - Front Right
Limits: Playback 0 - 64
Mono:
Front Left: Playback 64 [100%] [0.00dB] [on]
Front Right: Playback 64 [100%] [0.00dB] [on]
Simple mixer control 'Speaker',1
Capabilities: pvolume pswitch
Playback channels: Front Left - Front Right
Limits: Playback 0 - 64
Mono:
Front Left: Playback 64 [100%] [0.00dB] [on]
Front Right: Playback 64 [100%] [0.00dB] [on]
!!Alsactl output
!!-------------
--startcollapse--
state.Intel {
control.1 {
comment.access 'read write'
comment.type INTEGER
comment.count 2
comment.range '0 - 14'
comment.dbmin 0
comment.dbmax 2100
iface MIXER
name 'Capture Volume'
value.0 0
value.1 0
}
control.2 {
comment.access 'read write'
comment.type BOOLEAN
comment.count 2
iface MIXER
name 'Capture Switch'
value.0 true
value.1 true
}
control.3 {
comment.access 'read write'
comment.type INTEGER
comment.count 2
comment.range '0 - 14'
comment.dbmin 0
comment.dbmax 2100
iface MIXER
name 'Capture Volume'
index 1
value.0 0
value.1 0
}
control.4 {
comment.access 'read write'
comment.type BOOLEAN
comment.count 2
iface MIXER
name 'Capture Switch'
index 1
value.0 false
value.1 false
}
control.5 {
comment.access 'read write'
comment.type INTEGER
comment.count 2
comment.range '0 - 64'
comment.dbmin -4800
comment.dbmax 0
iface MIXER
name 'Speaker Playback Volume'
value.0 64
value.1 64
}
control.6 {
comment.access 'read write'
comment.type BOOLEAN
comment.count 2
iface MIXER
name 'Speaker Playback Switch'
value.0 true
value.1 true
}
control.7 {
comment.access 'read write'
comment.type INTEGER
comment.count 2
comment.range '0 - 64'
comment.dbmin -4800
comment.dbmax 0
iface MIXER
name 'Speaker Playback Volume'
index 1
value.0 64
value.1 64
}
control.8 {
comment.access 'read write'
comment.type BOOLEAN
comment.count 2
iface MIXER
name 'Speaker Playback Switch'
index 1
value.0 true
value.1 true
}
control.9 {
comment.access 'read write'
comment.type INTEGER
comment.count 2
comment.range '0 - 2'
comment.dbmin 0
comment.dbmax 2000
iface MIXER
name 'Mux Capture Volume'
value.0 0
value.1 0
}
control.10 {
comment.access 'read write'
comment.type INTEGER
comment.count 2
comment.range '0 - 4'
comment.dbmin 0
comment.dbmax 4000
iface MIXER
name 'Mux Capture Volume'
index 1
value.0 0
value.1 0
}
control.11 {
comment.access 'read write'
comment.type ENUMERATED
comment.count 1
comment.item.0 Mic
comment.item.1 Line
iface MIXER
name 'Input Source'
value Mic
}
control.12 {
comment.access 'read write'
comment.type ENUMERATED
comment.count 1
comment.item.0 Mic
comment.item.1 Line
iface MIXER
name 'Input Source'
index 1
value Mic
}
control.13 {
comment.access read
comment.type IEC958
comment.count 1
iface MIXER
name 'IEC958 Playback Con Mask'
value '0fff000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000'
}
control.14 {
comment.access read
comment.type IEC958
comment.count 1
iface MIXER
name 'IEC958 Playback Pro Mask'
value '0f00000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000'
}
control.15 {
comment.access 'read write'
comment.type IEC958
comment.count 1
iface MIXER
name 'IEC958 Playback Default'
value '0400000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000'
}
control.16 {
comment.access 'read write'
comment.type BOOLEAN
comment.count 1
iface MIXER
name 'IEC958 Playback Switch'
value false
}
control.17 {
comment.access 'read write'
comment.type BOOLEAN
comment.count 1
iface MIXER
name 'IEC958 Default PCM Playback Switch'
value true
}
control.18 {
comment.access 'read write'
comment.type INTEGER
comment.count 1
comment.range '0 - 64'
comment.dbmin -4800
comment.dbmax 0
iface MIXER
name 'Master Playback Volume'
value 43
}
control.19 {
comment.access 'read write'
comment.type BOOLEAN
comment.count 1
iface MIXER
name 'Master Playback Switch'
value true
}
control.20 {
comment.access 'read write user'
comment.type INTEGER
comment.count 2
comment.range '0 - 255'
comment.tlv '0000000100000008ffffec1400000014'
comment.dbmin -5100
comment.dbmax 0
iface MIXER
name 'PCM Playback Volume'
value.0 255
value.1 255
}
}
--endcollapse--
!!All Loaded Modules
!!------------------
Module
hfsplus
rfcomm
radeon
drm
ip6t_LOG
nf_conntrack_ipv6
ip6table_filter
ip6_tables
ipv6
snd_hda_codec_idt
uvcvideo
videodev
snd_hda_intel
v4l1_compat
snd_hda_codec
appletouch
ohci1394
[-- Attachment #4: Type: text/plain, Size: 160 bytes --]
_______________________________________________
Alsa-devel mailing list
Alsa-devel@alsa-project.org
http://mailman.alsa-project.org/mailman/listinfo/alsa-devel
^ permalink raw reply [flat|nested] 7+ messages in thread
* Re: hda Regression: jack doesn't mute speaker
[not found] ` <49E6DCED.90804@odi.ch>
@ 2009-04-16 8:41 ` Takashi Iwai
2009-04-17 17:28 ` Ortwin Glück
0 siblings, 1 reply; 7+ messages in thread
From: Takashi Iwai @ 2009-04-16 8:41 UTC (permalink / raw)
To: Ortwin Glück; +Cc: alsa-devel
At Thu, 16 Apr 2009 09:23:25 +0200,
Ortwin Glück wrote:
>
> Takashi Iwai wrote:
> >>>> Also the "Front"
> >>>> and "Surround" outputs are now both labeled "Speaker" (see attached images of kmix).
> >>> What I/O are they actually corresponding to? Are they speaker outputs
> >>> or line-outs, or anything else?
> >> They correspond to the built-in speakers.
> >
> > So they are really front/surround 4.0-speaker outputs?
>
> Probably. They seem to control two distinct speakers inside the laptop. More I
> don't know. In OS-X there is only a single volume control (a sacrifice to
> usability I think. who would want to control individual volumes of these on a
> laptop anyway).
The problem is likely because hp_detect field isn't set on your
machine because the headphone shares the same audio-out widget with
the speaker out.
Could you try the patch below?
thanks,
Takashi
---
diff --git a/sound/pci/hda/patch_sigmatel.c b/sound/pci/hda/patch_sigmatel.c
index ce30b45..917bc5d 100644
--- a/sound/pci/hda/patch_sigmatel.c
+++ b/sound/pci/hda/patch_sigmatel.c
@@ -3076,6 +3076,11 @@ static int create_multi_out_ctls(struct hda_codec *codec, int num_outs,
unsigned int wid_caps;
for (i = 0; i < num_outs && i < ARRAY_SIZE(chname); i++) {
+ if (type == AUTO_PIN_HP_OUT && !spec->hp_detect) {
+ wid_caps = get_wcaps(codec, pins[i]);
+ if (wid_caps & AC_WCAP_UNSOL_CAP)
+ spec->hp_detect = 1;
+ }
nid = dac_nids[i];
if (!nid)
continue;
@@ -3119,11 +3124,6 @@ static int create_multi_out_ctls(struct hda_codec *codec, int num_outs,
err = create_controls_idx(codec, name, idx, nid, 3);
if (err < 0)
return err;
- if (type == AUTO_PIN_HP_OUT && !spec->hp_detect) {
- wid_caps = get_wcaps(codec, pins[i]);
- if (wid_caps & AC_WCAP_UNSOL_CAP)
- spec->hp_detect = 1;
- }
}
}
return 0;
^ permalink raw reply related [flat|nested] 7+ messages in thread
* Re: hda Regression: jack doesn't mute speaker
2009-04-16 8:41 ` Takashi Iwai
@ 2009-04-17 17:28 ` Ortwin Glück
0 siblings, 0 replies; 7+ messages in thread
From: Ortwin Glück @ 2009-04-17 17:28 UTC (permalink / raw)
To: alsa-devel
Takashi Iwai wrote:
> The problem is likely because hp_detect field isn't set on your
> machine because the headphone shares the same audio-out widget with
> the speaker out.
>
> Could you try the patch below?
Yes, this patch does the trick. The HP jack correctly mutes the speakers now.
Thanks a lot. I guess this will make it into mainline with the next rc?
Cheers,
Ortwin
>
> thanks,
>
> Takashi
>
> ---
> diff --git a/sound/pci/hda/patch_sigmatel.c b/sound/pci/hda/patch_sigmatel.c
> index ce30b45..917bc5d 100644
> --- a/sound/pci/hda/patch_sigmatel.c
> +++ b/sound/pci/hda/patch_sigmatel.c
> @@ -3076,6 +3076,11 @@ static int create_multi_out_ctls(struct hda_codec *codec, int num_outs,
> unsigned int wid_caps;
>
> for (i = 0; i < num_outs && i < ARRAY_SIZE(chname); i++) {
> + if (type == AUTO_PIN_HP_OUT && !spec->hp_detect) {
> + wid_caps = get_wcaps(codec, pins[i]);
> + if (wid_caps & AC_WCAP_UNSOL_CAP)
> + spec->hp_detect = 1;
> + }
> nid = dac_nids[i];
> if (!nid)
> continue;
> @@ -3119,11 +3124,6 @@ static int create_multi_out_ctls(struct hda_codec *codec, int num_outs,
> err = create_controls_idx(codec, name, idx, nid, 3);
> if (err < 0)
> return err;
> - if (type == AUTO_PIN_HP_OUT && !spec->hp_detect) {
> - wid_caps = get_wcaps(codec, pins[i]);
> - if (wid_caps & AC_WCAP_UNSOL_CAP)
> - spec->hp_detect = 1;
> - }
> }
> }
> return 0;
^ permalink raw reply [flat|nested] 7+ messages in thread
end of thread, other threads:[~2009-04-17 17:28 UTC | newest]
Thread overview: 7+ messages (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
2009-04-15 22:01 hda Regression: jack doesn't mute speaker Ortwin Glück
2009-04-16 6:18 ` Takashi Iwai
2009-04-16 7:05 ` Ortwin Glück
2009-04-16 7:12 ` Takashi Iwai
[not found] ` <49E6DCED.90804@odi.ch>
2009-04-16 8:41 ` Takashi Iwai
2009-04-17 17:28 ` Ortwin Glück
2009-04-16 7:31 ` Ortwin Glück
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.