All of lore.kernel.org
 help / color / mirror / Atom feed
From: "Nicolas de Pesloüan" <nicolas.2p.debian@free.fr>
To: Jochen Hebbrecht <jochenhebbrecht@gmail.com>,
	bridge@lists.linux-foundation.org
Subject: Re: [Bridge] Ubuntu: network bridging between wireless and wired connection fails
Date: Mon, 04 May 2009 22:07:20 +0200	[thread overview]
Message-ID: <49FF4AF8.1050801@free.fr> (raw)
In-Reply-To: <49FF41C4.4090404@gmail.com>

Jochen Hebbrecht wrote:
> Maybe my picture isn't very clear, but my WAN access is on location A. 
> There's a router which receives an ip from the ISP. On the other side, 
> I'm having a 192.168.1.0/24 network

> $ cat /etc/network/interfaces
> auto lo
> iface lo inet loopback
> 
> auto eth1
> iface eth1 inet manual
> wpa-driver wext
> wpa-ssid ##SSID##
> wpa-ap-scan 1
> wpa-proto RSN
> wpa-pairwise CCMP
> wpa-group CCMP
> wpa-key-mgmt WPA-PSK
> wpa-psk ##PSK KEY##
> 
> auto br0
> iface br0 inet static
> bridge_ports eth1
> address 192.168.1.111
> netmask 255.255.255.0
> gateway 192.168.1.1
> 

> $ ping 192.168.1.1
> PING 192.168.1.1 (192.168.1.1) 56(84) bytes of data.
>  From 192.168.1.111 icmp_seq=2 Destination Host Unreachable
>  From 192.168.1.111 icmp_seq=3 Destination Host Unreachable
>  From 192.168.1.111 icmp_seq=5 Destination Host Unreachable
>  From 192.168.1.111 icmp_seq=6 Destination Host Unreachable
> 
> So here it goes wrong. I didn't execute any other steps as step 2 fails 

I think that the "Destination Host Unreachable" is caused by some sort 
of "down link", because wpa_supplicant failed to establish the wifi 
link. When eth1 is part of the br0, packets received on eth1 is 
"forwarded" to br0 and not available on eth1. So wpa_supplicant must be 
instructed to listen for incoming packets on br0, not on eth1.

Can you try the exact same configuration, adding wpa-bridge br0 in the 
eth1 stanza, to inform wpa_supplicant where to listen from ?

auto lo
iface lo inet loopback

auto eth1
iface eth1 inet manual
wpa-driver wext
wpa-ssid ##SSID##
wpa-ap-scan 1
wpa-proto RSN
wpa-pairwise CCMP
wpa-group CCMP
wpa-key-mgmt WPA-PSK
wpa-psk ##PSK KEY##
wpa-bridge br0          <--- HERE.

auto br0
iface br0 inet static
bridge_ports eth1
address 192.168.1.111
netmask 255.255.255.0
gateway 192.168.1.1

If this fail, please provide the output of i_w_config eth1 and arp -an.

	Nicolas.

  parent reply	other threads:[~2009-05-04 20:07 UTC|newest]

Thread overview: 47+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2009-04-27 21:13 [Bridge] Ubuntu: network bridging between wireless and wired connection fails Jochen Hebbrecht
2009-04-27 21:36 ` richardvoigt
2009-04-28  6:44   ` Jochen Hebbrecht
2009-04-28 12:40     ` Ross Vandegrift
2009-04-28 12:52       ` Jochen Hebbrecht
2009-04-28 13:37         ` Ross Vandegrift
2009-04-28 17:36           ` Jochen Hebbrecht
2009-04-28 19:00             ` richardvoigt
2009-04-28 21:16               ` Jochen Hebbrecht
2009-04-28 23:00                 ` richardvoigt
2009-04-29 16:16                   ` Jochen Hebbrecht
2009-04-29 16:26                     ` Ross Vandegrift
2009-04-29 16:40                       ` Jochen Hebbrecht
2009-04-29 16:53                         ` Ross Vandegrift
2009-04-29 21:21                           ` Jochen Hebbrecht
2009-04-30  4:18                             ` richardvoigt
2009-04-30  6:30                               ` Jochen Hebbrecht
2009-04-30 21:54                                 ` Nicolas de Pesloüan
2009-05-02 13:15                                   ` Jochen Hebbrecht
2009-05-03 17:46                                     ` Nicolas de Pesloüan
2009-05-04  3:59                                       ` richardvoigt
2009-05-04 19:29                                         ` Jochen Hebbrecht
2009-05-04 19:28                                       ` Jochen Hebbrecht
2009-05-04 19:34                                         ` Nicolas de Pesloüan
2009-05-04 19:42                                           ` Jochen Hebbrecht
2009-05-04 20:07                                         ` Nicolas de Pesloüan [this message]
2009-05-04 21:06                                           ` Jochen Hebbrecht
2009-05-04 23:33                                             ` richardvoigt
2009-05-05  5:49                                               ` Nicolas de Pesloüan
2009-05-05 16:59                                                 ` Jochen Hebbrecht
2009-05-05  6:20                                             ` Nicolas de Pesloüan
2009-05-05 17:01                                               ` Jochen Hebbrecht
2009-05-05 18:08                                                 ` richardvoigt
2009-05-05 19:19                                                   ` Jochen Hebbrecht
2009-05-05 19:53                                                     ` Jonathan Thibault
2009-05-05 20:52                                                       ` Jochen Hebbrecht
2009-05-05 21:44                                                 ` Nicolas de Pesloüan
2009-05-06  6:57                                                   ` Jochen Hebbrecht
2009-05-06 15:37                                                   ` Jochen Hebbrecht
2009-05-06 16:55                                                     ` Jonathan Thibault
2009-05-09 11:15                                                       ` Jochen Hebbrecht
2009-05-06 16:47                                                   ` Jochen Hebbrecht
2009-05-06 20:07                                                     ` Nicolas de Pesloüan
2009-05-09 11:17                                                       ` Jochen Hebbrecht
2009-05-09 23:30                                                         ` richardvoigt
2009-05-10 15:39                                                         ` Nicolas de Pesloüan
2009-04-29 16:41                       ` Jochen Hebbrecht

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=49FF4AF8.1050801@free.fr \
    --to=nicolas.2p.debian@free.fr \
    --cc=bridge@lists.linux-foundation.org \
    --cc=jochenhebbrecht@gmail.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.