From: Yinghai Lu <yinghai@kernel.org>
To: Ingo Molnar <mingo@elte.hu>, Thomas Gleixner <tglx@linutronix.de>,
"H. Peter Anvin" <hpa@zytor.com>,
Andrew Morton <akpm@linux-foundation.org>,
Jesse Barnes <jbarnes@virtuousgeek.org>
Cc: "linux-kernel@vger.kernel.org" <linux-kernel@vger.kernel.org>,
linux-pci@vger.kernel.org,
ACPI Devel Maling List <linux-acpi@vger.kernel.org>
Subject: [PATCH 5/7] x86/pci: add 4 more return param in IO_APIC_get_PCI_irq_vector
Date: Wed, 06 May 2009 10:08:22 -0700 [thread overview]
Message-ID: <4A01C406.2040303@kernel.org> (raw)
In-Reply-To: <4A01C35C.7060207@kernel.org>
so prepare those params for pcibios_irq_enable to call setup_io_apic_routing
Signed-off-by: Yinghai Lu <yinghai@kernel.org>
---
arch/x86/include/asm/hw_irq.h | 4 +
arch/x86/kernel/apic/io_apic.c | 107 ++++++++++++++++++++------------------
arch/x86/pci/irq.c | 24 +++++++-
drivers/pci/hotplug/ibmphp_core.c | 52 +++++++++---------
4 files changed, 110 insertions(+), 77 deletions(-)
Index: linux-2.6/arch/x86/kernel/apic/io_apic.c
===================================================================
--- linux-2.6.orig/arch/x86/kernel/apic/io_apic.c
+++ linux-2.6/arch/x86/kernel/apic/io_apic.c
@@ -874,54 +874,6 @@ static int __init find_isa_irq_apic(int
return -1;
}
-/*
- * Find a specific PCI IRQ entry.
- * Not an __init, possibly needed by modules
- */
-static int pin_2_irq(int idx, int apic, int pin);
-
-int IO_APIC_get_PCI_irq_vector(int bus, int slot, int pin)
-{
- int apic, i, best_guess = -1;
-
- apic_printk(APIC_DEBUG, "querying PCI -> IRQ mapping bus:%d, slot:%d, pin:%d.\n",
- bus, slot, pin);
- if (test_bit(bus, mp_bus_not_pci)) {
- apic_printk(APIC_VERBOSE, "PCI BIOS passed nonexistent PCI bus %d!\n", bus);
- return -1;
- }
- for (i = 0; i < mp_irq_entries; i++) {
- int lbus = mp_irqs[i].srcbus;
-
- for (apic = 0; apic < nr_ioapics; apic++)
- if (mp_ioapics[apic].apicid == mp_irqs[i].dstapic ||
- mp_irqs[i].dstapic == MP_APIC_ALL)
- break;
-
- if (!test_bit(lbus, mp_bus_not_pci) &&
- !mp_irqs[i].irqtype &&
- (bus == lbus) &&
- (slot == ((mp_irqs[i].srcbusirq >> 2) & 0x1f))) {
- int irq = pin_2_irq(i, apic, mp_irqs[i].dstirq);
-
- if (!(apic || IO_APIC_IRQ(irq)))
- continue;
-
- if (pin == (mp_irqs[i].srcbusirq & 3))
- return irq;
- /*
- * Use the first all-but-pin matching entry as a
- * best-guess fuzzy result for broken mptables.
- */
- if (best_guess < 0)
- best_guess = irq;
- }
- }
- return best_guess;
-}
-
-EXPORT_SYMBOL(IO_APIC_get_PCI_irq_vector);
-
#if defined(CONFIG_EISA) || defined(CONFIG_MCA)
/*
* EISA Edge/Level control register, ELCR
@@ -1140,6 +1092,65 @@ static int pin_2_irq(int idx, int apic,
return irq;
}
+/*
+ * Find a specific PCI IRQ entry.
+ * Not an __init, possibly needed by modules
+ */
+int IO_APIC_get_PCI_irq_vector(int bus, int slot, int pin,
+ int *ioapic, int *ioapic_pin,
+ int *trigger, int *polarity)
+{
+ int apic, i, best_guess = -1;
+
+ apic_printk(APIC_DEBUG,
+ "querying PCI -> IRQ mapping bus:%d, slot:%d, pin:%d.\n",
+ bus, slot, pin);
+ if (test_bit(bus, mp_bus_not_pci)) {
+ apic_printk(APIC_VERBOSE,
+ "PCI BIOS passed nonexistent PCI bus %d!\n", bus);
+ return -1;
+ }
+ for (i = 0; i < mp_irq_entries; i++) {
+ int lbus = mp_irqs[i].srcbus;
+
+ for (apic = 0; apic < nr_ioapics; apic++)
+ if (mp_ioapics[apic].apicid == mp_irqs[i].dstapic ||
+ mp_irqs[i].dstapic == MP_APIC_ALL)
+ break;
+
+ if (!test_bit(lbus, mp_bus_not_pci) &&
+ !mp_irqs[i].irqtype &&
+ (bus == lbus) &&
+ (slot == ((mp_irqs[i].srcbusirq >> 2) & 0x1f))) {
+ int irq = pin_2_irq(i, apic, mp_irqs[i].dstirq);
+
+ if (!(apic || IO_APIC_IRQ(irq)))
+ continue;
+
+ if (pin == (mp_irqs[i].srcbusirq & 3)) {
+ *ioapic = apic;
+ *ioapic_pin = mp_irqs[i].dstirq;
+ *trigger = irq_trigger(i);
+ *polarity = irq_polarity(i);
+ return irq;
+ }
+ /*
+ * Use the first all-but-pin matching entry as a
+ * best-guess fuzzy result for broken mptables.
+ */
+ if (best_guess < 0) {
+ *ioapic = apic;
+ *ioapic_pin = mp_irqs[i].dstirq;
+ *trigger = irq_trigger(i);
+ *polarity = irq_polarity(i);
+ best_guess = irq;
+ }
+ }
+ }
+ return best_guess;
+}
+EXPORT_SYMBOL(IO_APIC_get_PCI_irq_vector);
+
void lock_vector_lock(void)
{
/* Used to the online set of cpus does not change
Index: linux-2.6/arch/x86/include/asm/hw_irq.h
===================================================================
--- linux-2.6.orig/arch/x86/include/asm/hw_irq.h
+++ linux-2.6/arch/x86/include/asm/hw_irq.h
@@ -66,7 +66,9 @@ extern unsigned long io_apic_irqs;
extern void init_VISWS_APIC_irqs(void);
extern void setup_IO_APIC(void);
extern void disable_IO_APIC(void);
-extern int IO_APIC_get_PCI_irq_vector(int bus, int slot, int fn);
+extern int IO_APIC_get_PCI_irq_vector(int bus, int devfn, int pin,
+ int *ioapic, int *ioapic_pin,
+ int *trigger, int *polarity);
extern void setup_ioapic_dest(void);
extern void enable_IO_APIC(void);
Index: linux-2.6/drivers/pci/hotplug/ibmphp_core.c
===================================================================
--- linux-2.6.orig/drivers/pci/hotplug/ibmphp_core.c
+++ linux-2.6/drivers/pci/hotplug/ibmphp_core.c
@@ -153,45 +153,49 @@ int ibmphp_init_devno(struct slot **cur_
return -1;
}
for (loop = 0; loop < len; loop++) {
- if ((*cur_slot)->number == rtable->slots[loop].slot) {
- if ((*cur_slot)->bus == rtable->slots[loop].bus) {
+ if ((*cur_slot)->number == rtable->slots[loop].slot &&
+ (*cur_slot)->bus == rtable->slots[loop].bus) {
+ int ioapic = -1, ioapic_pin = -1;
+ int triggering, polarity;
+
(*cur_slot)->device = PCI_SLOT(rtable->slots[loop].devfn);
for (i = 0; i < 4; i++)
(*cur_slot)->irq[i] = IO_APIC_get_PCI_irq_vector((int) (*cur_slot)->bus,
- (int) (*cur_slot)->device, i);
+ (int) (*cur_slot)->device, i.
+ &ioapic, &ioapic_pin,
+ &triggering, &polarity);
- debug("(*cur_slot)->irq[0] = %x\n",
- (*cur_slot)->irq[0]);
- debug("(*cur_slot)->irq[1] = %x\n",
- (*cur_slot)->irq[1]);
- debug("(*cur_slot)->irq[2] = %x\n",
- (*cur_slot)->irq[2]);
- debug("(*cur_slot)->irq[3] = %x\n",
- (*cur_slot)->irq[3]);
+ debug("(*cur_slot)->irq[0] = %x\n",
+ (*cur_slot)->irq[0]);
+ debug("(*cur_slot)->irq[1] = %x\n",
+ (*cur_slot)->irq[1]);
+ debug("(*cur_slot)->irq[2] = %x\n",
+ (*cur_slot)->irq[2]);
+ debug("(*cur_slot)->irq[3] = %x\n",
+ (*cur_slot)->irq[3]);
- debug("rtable->exlusive_irqs = %x\n",
+ debug("rtable->exlusive_irqs = %x\n",
rtable->exclusive_irqs);
- debug("rtable->slots[loop].irq[0].bitmap = %x\n",
+ debug("rtable->slots[loop].irq[0].bitmap = %x\n",
rtable->slots[loop].irq[0].bitmap);
- debug("rtable->slots[loop].irq[1].bitmap = %x\n",
+ debug("rtable->slots[loop].irq[1].bitmap = %x\n",
rtable->slots[loop].irq[1].bitmap);
- debug("rtable->slots[loop].irq[2].bitmap = %x\n",
+ debug("rtable->slots[loop].irq[2].bitmap = %x\n",
rtable->slots[loop].irq[2].bitmap);
- debug("rtable->slots[loop].irq[3].bitmap = %x\n",
+ debug("rtable->slots[loop].irq[3].bitmap = %x\n",
rtable->slots[loop].irq[3].bitmap);
- debug("rtable->slots[loop].irq[0].link = %x\n",
+ debug("rtable->slots[loop].irq[0].link = %x\n",
rtable->slots[loop].irq[0].link);
- debug("rtable->slots[loop].irq[1].link = %x\n",
+ debug("rtable->slots[loop].irq[1].link = %x\n",
rtable->slots[loop].irq[1].link);
- debug("rtable->slots[loop].irq[2].link = %x\n",
+ debug("rtable->slots[loop].irq[2].link = %x\n",
rtable->slots[loop].irq[2].link);
- debug("rtable->slots[loop].irq[3].link = %x\n",
+ debug("rtable->slots[loop].irq[3].link = %x\n",
rtable->slots[loop].irq[3].link);
- debug("end of init_devno\n");
- kfree(rtable);
- return 0;
- }
+ debug("end of init_devno\n");
+ kfree(rtable);
+ return 0;
}
}
Index: linux-2.6/arch/x86/pci/irq.c
===================================================================
--- linux-2.6.orig/arch/x86/pci/irq.c
+++ linux-2.6/arch/x86/pci/irq.c
@@ -1051,12 +1051,16 @@ static void __init pcibios_fixup_irqs(vo
*/
if (io_apic_assign_pci_irqs) {
int irq;
+ int ioapic = -1, ioapic_pin = -1;
+ int triggering, polarity;
/*
* interrupt pins are numbered starting from 1
*/
irq = IO_APIC_get_PCI_irq_vector(dev->bus->number,
- PCI_SLOT(dev->devfn), pin - 1);
+ PCI_SLOT(dev->devfn), pin - 1,
+ &ioapic, &ioapic_pin,
+ &triggering, &polarity);
/*
* Busses behind bridges are typically not listed in the
* MP-table. In this case we have to look up the IRQ
@@ -1072,7 +1076,10 @@ static void __init pcibios_fixup_irqs(vo
pin = pci_swizzle_interrupt_pin(dev, pin);
bus = bridge->bus->number;
irq = IO_APIC_get_PCI_irq_vector(bus,
- PCI_SLOT(bridge->devfn), pin - 1);
+ PCI_SLOT(bridge->devfn),
+ pin - 1,
+ &ioapic, &ioapic_pin,
+ &triggering, &polarity);
if (irq >= 0)
dev_warn(&dev->dev,
"using bridge %s INT %c to "
@@ -1221,8 +1228,14 @@ static int pirq_enable_irq(struct pci_de
if (io_apic_assign_pci_irqs) {
int irq;
+ int ioapic = -1, ioapic_pin = -1;
+ int triggering, polarity;
- irq = IO_APIC_get_PCI_irq_vector(dev->bus->number, PCI_SLOT(dev->devfn), pin - 1);
+ irq = IO_APIC_get_PCI_irq_vector(dev->bus->number,
+ PCI_SLOT(dev->devfn),
+ pin - 1,
+ &ioapic, &ioapic_pin,
+ &triggering, &polarity);
/*
* Busses behind bridges are typically not listed in the MP-table.
* In this case we have to look up the IRQ based on the parent bus,
@@ -1235,7 +1248,10 @@ static int pirq_enable_irq(struct pci_de
pin = pci_swizzle_interrupt_pin(dev, pin);
irq = IO_APIC_get_PCI_irq_vector(bridge->bus->number,
- PCI_SLOT(bridge->devfn), pin - 1);
+ PCI_SLOT(bridge->devfn),
+ pin - 1,
+ &ioapic, &ioapic_pin,
+ &triggering, &polarity);
if (irq >= 0)
dev_warn(&dev->dev, "using bridge %s "
"INT %c to get IRQ %d\n",
WARNING: multiple messages have this Message-ID (diff)
From: Yinghai Lu <yinghai@kernel.org>
To: Ingo Molnar <mingo@elte.hu>, Thomas Gleixner <tglx@linutronix.de>,
"H. Peter Anvin" <hpa@zytor.com>,
Andrew Morton <akpm@linux-foundation.org>,
Jesse Barnes <jbarnes@virtuousgeek.org>,
Len Brown <lenb@kernel.org>
Cc: "linux-kernel@vger.kernel.org" <linux-kernel@vger.kernel.org>,
linux-pci@vger.kernel.org,
ACPI Devel Maling List <linux-acpi@vger.kernel.org>
Subject: [PATCH 5/7] x86/pci: add 4 more return param in IO_APIC_get_PCI_irq_vector
Date: Wed, 06 May 2009 10:08:22 -0700 [thread overview]
Message-ID: <4A01C406.2040303@kernel.org> (raw)
In-Reply-To: <4A01C35C.7060207@kernel.org>
so prepare those params for pcibios_irq_enable to call setup_io_apic_routing
Signed-off-by: Yinghai Lu <yinghai@kernel.org>
---
arch/x86/include/asm/hw_irq.h | 4 +
arch/x86/kernel/apic/io_apic.c | 107 ++++++++++++++++++++------------------
arch/x86/pci/irq.c | 24 +++++++-
drivers/pci/hotplug/ibmphp_core.c | 52 +++++++++---------
4 files changed, 110 insertions(+), 77 deletions(-)
Index: linux-2.6/arch/x86/kernel/apic/io_apic.c
===================================================================
--- linux-2.6.orig/arch/x86/kernel/apic/io_apic.c
+++ linux-2.6/arch/x86/kernel/apic/io_apic.c
@@ -874,54 +874,6 @@ static int __init find_isa_irq_apic(int
return -1;
}
-/*
- * Find a specific PCI IRQ entry.
- * Not an __init, possibly needed by modules
- */
-static int pin_2_irq(int idx, int apic, int pin);
-
-int IO_APIC_get_PCI_irq_vector(int bus, int slot, int pin)
-{
- int apic, i, best_guess = -1;
-
- apic_printk(APIC_DEBUG, "querying PCI -> IRQ mapping bus:%d, slot:%d, pin:%d.\n",
- bus, slot, pin);
- if (test_bit(bus, mp_bus_not_pci)) {
- apic_printk(APIC_VERBOSE, "PCI BIOS passed nonexistent PCI bus %d!\n", bus);
- return -1;
- }
- for (i = 0; i < mp_irq_entries; i++) {
- int lbus = mp_irqs[i].srcbus;
-
- for (apic = 0; apic < nr_ioapics; apic++)
- if (mp_ioapics[apic].apicid == mp_irqs[i].dstapic ||
- mp_irqs[i].dstapic == MP_APIC_ALL)
- break;
-
- if (!test_bit(lbus, mp_bus_not_pci) &&
- !mp_irqs[i].irqtype &&
- (bus == lbus) &&
- (slot == ((mp_irqs[i].srcbusirq >> 2) & 0x1f))) {
- int irq = pin_2_irq(i, apic, mp_irqs[i].dstirq);
-
- if (!(apic || IO_APIC_IRQ(irq)))
- continue;
-
- if (pin == (mp_irqs[i].srcbusirq & 3))
- return irq;
- /*
- * Use the first all-but-pin matching entry as a
- * best-guess fuzzy result for broken mptables.
- */
- if (best_guess < 0)
- best_guess = irq;
- }
- }
- return best_guess;
-}
-
-EXPORT_SYMBOL(IO_APIC_get_PCI_irq_vector);
-
#if defined(CONFIG_EISA) || defined(CONFIG_MCA)
/*
* EISA Edge/Level control register, ELCR
@@ -1140,6 +1092,65 @@ static int pin_2_irq(int idx, int apic,
return irq;
}
+/*
+ * Find a specific PCI IRQ entry.
+ * Not an __init, possibly needed by modules
+ */
+int IO_APIC_get_PCI_irq_vector(int bus, int slot, int pin,
+ int *ioapic, int *ioapic_pin,
+ int *trigger, int *polarity)
+{
+ int apic, i, best_guess = -1;
+
+ apic_printk(APIC_DEBUG,
+ "querying PCI -> IRQ mapping bus:%d, slot:%d, pin:%d.\n",
+ bus, slot, pin);
+ if (test_bit(bus, mp_bus_not_pci)) {
+ apic_printk(APIC_VERBOSE,
+ "PCI BIOS passed nonexistent PCI bus %d!\n", bus);
+ return -1;
+ }
+ for (i = 0; i < mp_irq_entries; i++) {
+ int lbus = mp_irqs[i].srcbus;
+
+ for (apic = 0; apic < nr_ioapics; apic++)
+ if (mp_ioapics[apic].apicid == mp_irqs[i].dstapic ||
+ mp_irqs[i].dstapic == MP_APIC_ALL)
+ break;
+
+ if (!test_bit(lbus, mp_bus_not_pci) &&
+ !mp_irqs[i].irqtype &&
+ (bus == lbus) &&
+ (slot == ((mp_irqs[i].srcbusirq >> 2) & 0x1f))) {
+ int irq = pin_2_irq(i, apic, mp_irqs[i].dstirq);
+
+ if (!(apic || IO_APIC_IRQ(irq)))
+ continue;
+
+ if (pin == (mp_irqs[i].srcbusirq & 3)) {
+ *ioapic = apic;
+ *ioapic_pin = mp_irqs[i].dstirq;
+ *trigger = irq_trigger(i);
+ *polarity = irq_polarity(i);
+ return irq;
+ }
+ /*
+ * Use the first all-but-pin matching entry as a
+ * best-guess fuzzy result for broken mptables.
+ */
+ if (best_guess < 0) {
+ *ioapic = apic;
+ *ioapic_pin = mp_irqs[i].dstirq;
+ *trigger = irq_trigger(i);
+ *polarity = irq_polarity(i);
+ best_guess = irq;
+ }
+ }
+ }
+ return best_guess;
+}
+EXPORT_SYMBOL(IO_APIC_get_PCI_irq_vector);
+
void lock_vector_lock(void)
{
/* Used to the online set of cpus does not change
Index: linux-2.6/arch/x86/include/asm/hw_irq.h
===================================================================
--- linux-2.6.orig/arch/x86/include/asm/hw_irq.h
+++ linux-2.6/arch/x86/include/asm/hw_irq.h
@@ -66,7 +66,9 @@ extern unsigned long io_apic_irqs;
extern void init_VISWS_APIC_irqs(void);
extern void setup_IO_APIC(void);
extern void disable_IO_APIC(void);
-extern int IO_APIC_get_PCI_irq_vector(int bus, int slot, int fn);
+extern int IO_APIC_get_PCI_irq_vector(int bus, int devfn, int pin,
+ int *ioapic, int *ioapic_pin,
+ int *trigger, int *polarity);
extern void setup_ioapic_dest(void);
extern void enable_IO_APIC(void);
Index: linux-2.6/drivers/pci/hotplug/ibmphp_core.c
===================================================================
--- linux-2.6.orig/drivers/pci/hotplug/ibmphp_core.c
+++ linux-2.6/drivers/pci/hotplug/ibmphp_core.c
@@ -153,45 +153,49 @@ int ibmphp_init_devno(struct slot **cur_
return -1;
}
for (loop = 0; loop < len; loop++) {
- if ((*cur_slot)->number == rtable->slots[loop].slot) {
- if ((*cur_slot)->bus == rtable->slots[loop].bus) {
+ if ((*cur_slot)->number == rtable->slots[loop].slot &&
+ (*cur_slot)->bus == rtable->slots[loop].bus) {
+ int ioapic = -1, ioapic_pin = -1;
+ int triggering, polarity;
+
(*cur_slot)->device = PCI_SLOT(rtable->slots[loop].devfn);
for (i = 0; i < 4; i++)
(*cur_slot)->irq[i] = IO_APIC_get_PCI_irq_vector((int) (*cur_slot)->bus,
- (int) (*cur_slot)->device, i);
+ (int) (*cur_slot)->device, i.
+ &ioapic, &ioapic_pin,
+ &triggering, &polarity);
- debug("(*cur_slot)->irq[0] = %x\n",
- (*cur_slot)->irq[0]);
- debug("(*cur_slot)->irq[1] = %x\n",
- (*cur_slot)->irq[1]);
- debug("(*cur_slot)->irq[2] = %x\n",
- (*cur_slot)->irq[2]);
- debug("(*cur_slot)->irq[3] = %x\n",
- (*cur_slot)->irq[3]);
+ debug("(*cur_slot)->irq[0] = %x\n",
+ (*cur_slot)->irq[0]);
+ debug("(*cur_slot)->irq[1] = %x\n",
+ (*cur_slot)->irq[1]);
+ debug("(*cur_slot)->irq[2] = %x\n",
+ (*cur_slot)->irq[2]);
+ debug("(*cur_slot)->irq[3] = %x\n",
+ (*cur_slot)->irq[3]);
- debug("rtable->exlusive_irqs = %x\n",
+ debug("rtable->exlusive_irqs = %x\n",
rtable->exclusive_irqs);
- debug("rtable->slots[loop].irq[0].bitmap = %x\n",
+ debug("rtable->slots[loop].irq[0].bitmap = %x\n",
rtable->slots[loop].irq[0].bitmap);
- debug("rtable->slots[loop].irq[1].bitmap = %x\n",
+ debug("rtable->slots[loop].irq[1].bitmap = %x\n",
rtable->slots[loop].irq[1].bitmap);
- debug("rtable->slots[loop].irq[2].bitmap = %x\n",
+ debug("rtable->slots[loop].irq[2].bitmap = %x\n",
rtable->slots[loop].irq[2].bitmap);
- debug("rtable->slots[loop].irq[3].bitmap = %x\n",
+ debug("rtable->slots[loop].irq[3].bitmap = %x\n",
rtable->slots[loop].irq[3].bitmap);
- debug("rtable->slots[loop].irq[0].link = %x\n",
+ debug("rtable->slots[loop].irq[0].link = %x\n",
rtable->slots[loop].irq[0].link);
- debug("rtable->slots[loop].irq[1].link = %x\n",
+ debug("rtable->slots[loop].irq[1].link = %x\n",
rtable->slots[loop].irq[1].link);
- debug("rtable->slots[loop].irq[2].link = %x\n",
+ debug("rtable->slots[loop].irq[2].link = %x\n",
rtable->slots[loop].irq[2].link);
- debug("rtable->slots[loop].irq[3].link = %x\n",
+ debug("rtable->slots[loop].irq[3].link = %x\n",
rtable->slots[loop].irq[3].link);
- debug("end of init_devno\n");
- kfree(rtable);
- return 0;
- }
+ debug("end of init_devno\n");
+ kfree(rtable);
+ return 0;
}
}
Index: linux-2.6/arch/x86/pci/irq.c
===================================================================
--- linux-2.6.orig/arch/x86/pci/irq.c
+++ linux-2.6/arch/x86/pci/irq.c
@@ -1051,12 +1051,16 @@ static void __init pcibios_fixup_irqs(vo
*/
if (io_apic_assign_pci_irqs) {
int irq;
+ int ioapic = -1, ioapic_pin = -1;
+ int triggering, polarity;
/*
* interrupt pins are numbered starting from 1
*/
irq = IO_APIC_get_PCI_irq_vector(dev->bus->number,
- PCI_SLOT(dev->devfn), pin - 1);
+ PCI_SLOT(dev->devfn), pin - 1,
+ &ioapic, &ioapic_pin,
+ &triggering, &polarity);
/*
* Busses behind bridges are typically not listed in the
* MP-table. In this case we have to look up the IRQ
@@ -1072,7 +1076,10 @@ static void __init pcibios_fixup_irqs(vo
pin = pci_swizzle_interrupt_pin(dev, pin);
bus = bridge->bus->number;
irq = IO_APIC_get_PCI_irq_vector(bus,
- PCI_SLOT(bridge->devfn), pin - 1);
+ PCI_SLOT(bridge->devfn),
+ pin - 1,
+ &ioapic, &ioapic_pin,
+ &triggering, &polarity);
if (irq >= 0)
dev_warn(&dev->dev,
"using bridge %s INT %c to "
@@ -1221,8 +1228,14 @@ static int pirq_enable_irq(struct pci_de
if (io_apic_assign_pci_irqs) {
int irq;
+ int ioapic = -1, ioapic_pin = -1;
+ int triggering, polarity;
- irq = IO_APIC_get_PCI_irq_vector(dev->bus->number, PCI_SLOT(dev->devfn), pin - 1);
+ irq = IO_APIC_get_PCI_irq_vector(dev->bus->number,
+ PCI_SLOT(dev->devfn),
+ pin - 1,
+ &ioapic, &ioapic_pin,
+ &triggering, &polarity);
/*
* Busses behind bridges are typically not listed in the MP-table.
* In this case we have to look up the IRQ based on the parent bus,
@@ -1235,7 +1248,10 @@ static int pirq_enable_irq(struct pci_de
pin = pci_swizzle_interrupt_pin(dev, pin);
irq = IO_APIC_get_PCI_irq_vector(bridge->bus->number,
- PCI_SLOT(bridge->devfn), pin - 1);
+ PCI_SLOT(bridge->devfn),
+ pin - 1,
+ &ioapic, &ioapic_pin,
+ &triggering, &polarity);
if (irq >= 0)
dev_warn(&dev->dev, "using bridge %s "
"INT %c to get IRQ %d\n",
next prev parent reply other threads:[~2009-05-06 17:08 UTC|newest]
Thread overview: 37+ messages / expand[flat|nested] mbox.gz Atom feed top
2009-05-06 17:05 [PATCH 1/7] x86/acpi: remove compress irq trick for 32bit Yinghai Lu
2009-05-06 17:05 ` Yinghai Lu
2009-05-06 17:06 ` [PATCH 2/7] x86/acpi: calling mp_config_acpi_gsi in mp_register_gsi -v2 Yinghai Lu
2009-05-06 17:06 ` Yinghai Lu
2009-05-11 9:52 ` [tip:irq/numa] x86/acpi: call mp_config_acpi_gsi() in mp_register_gsi() tip-bot for Yinghai Lu
2009-05-14 16:20 ` [PATCH 2/7] x86/acpi: calling mp_config_acpi_gsi in mp_register_gsi -v2 Len Brown
2009-05-14 17:43 ` Yinghai Lu
2009-05-06 17:07 ` [PATCH 3/7] x86: fix alloc_mptable Yinghai Lu
2009-05-06 17:07 ` Yinghai Lu
2009-05-11 8:22 ` Ingo Molnar
2009-05-11 9:52 ` [tip:irq/numa] x86: fix alloc_mptable() tip-bot for Yinghai Lu
2009-05-06 17:07 ` [PATCH 4/7] x86/acpi: move pin_programmed bit map to io_apic.c Yinghai Lu
2009-05-06 17:07 ` Yinghai Lu
2009-05-11 9:52 ` [tip:irq/numa] " tip-bot for Yinghai Lu
2009-05-06 17:08 ` Yinghai Lu [this message]
2009-05-06 17:08 ` [PATCH 5/7] x86/pci: add 4 more return param in IO_APIC_get_PCI_irq_vector Yinghai Lu
2009-05-07 14:10 ` Ingo Molnar
2009-05-11 8:28 ` Ingo Molnar
2009-05-11 19:40 ` Yinghai Lu
2009-05-11 21:37 ` Ingo Molnar
2009-05-11 22:55 ` [PATCH] x86: introduce io_apic_irq_attr -v2 Yinghai Lu
2009-05-12 10:32 ` Ingo Molnar
2009-05-12 15:17 ` Yinghai Lu
2009-05-12 18:02 ` Yinghai Lu
2009-05-18 7:39 ` [tip:irq/numa] x86, apic: introduce io_apic_irq_attr tip-bot for Yinghai Lu
2009-05-11 9:05 ` [PATCH 5/7] x86/pci: add 4 more return param in IO_APIC_get_PCI_irq_vector Ingo Molnar
2009-05-11 9:52 ` [tip:irq/numa] x86/pci: add 4 more return parameters to IO_APIC_get_PCI_irq_vector() tip-bot for Yinghai Lu
2009-05-06 17:08 ` [PATCH 6/7] x86/acpi: move setup io apic routing out of ACPI macro scope Yinghai Lu
2009-05-06 17:08 ` Yinghai Lu
2009-05-11 9:53 ` [tip:irq/numa] x86/acpi: move setup io apic routing out of CONFIG_ACPI scope tip-bot for Yinghai Lu
2009-05-06 17:10 ` [PATCH 7/7] x86/pci: update pirq_enable_irq to setup io apic routing -v2 Yinghai Lu
2009-05-06 17:10 ` Yinghai Lu
2009-05-07 14:12 ` Ingo Molnar
2009-05-07 16:52 ` Jesse Barnes
2009-05-11 7:49 ` Ingo Molnar
2009-05-11 9:53 ` [tip:irq/numa] x86/pci: update pirq_enable_irq() to setup io apic routing tip-bot for Yinghai Lu
2009-05-11 9:52 ` [tip:irq/numa] x86/acpi: remove irq-compression trick on 32-bit tip-bot for Yinghai Lu
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=4A01C406.2040303@kernel.org \
--to=yinghai@kernel.org \
--cc=akpm@linux-foundation.org \
--cc=hpa@zytor.com \
--cc=jbarnes@virtuousgeek.org \
--cc=linux-acpi@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-pci@vger.kernel.org \
--cc=mingo@elte.hu \
--cc=tglx@linutronix.de \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.