From: Kim Kyuwon <q1.kim@samsung.com>
To: LKML <linux-kernel@vger.kernel.org>
Cc: Dmitry Torokhov <dmitry.torokhov@gmail.com>,
linux-input@vger.kernel.org,
Kyungmin Park <kyungmin.park@samsung.com>,
Marek Szyprowski <m.szyprowski@samsung.com>
Subject: [PATCH] Input: add MAX7359 key switch controller driver, v2
Date: Sat, 09 May 2009 11:09:46 +0900 [thread overview]
Message-ID: <4A04E5EA.7000103@samsung.com> (raw)
The Maxim MAX7359 is a I2C interfaced key switch controller which provides
microprocessors with management of up to 64 key switches.
This patch adds support for the MAX7359 key switch controller.
Signed-off-by: Kim Kyuwon <q1.kim@samsung.com>
---
drivers/input/keyboard/Kconfig | 11 +
drivers/input/keyboard/Makefile | 1 +
drivers/input/keyboard/max7359_keypad.c | 369 +++++++++++++++++++++++++++++++
include/linux/max7359_keypad.h | 27 +++
4 files changed, 408 insertions(+), 0 deletions(-)
create mode 100644 drivers/input/keyboard/max7359_keypad.c
create mode 100644 include/linux/max7359_keypad.h
diff --git a/drivers/input/keyboard/Kconfig b/drivers/input/keyboard/Kconfig
index ea2638b..56193e6 100644
--- a/drivers/input/keyboard/Kconfig
+++ b/drivers/input/keyboard/Kconfig
@@ -332,4 +332,15 @@ config KEYBOARD_SH_KEYSC
To compile this driver as a module, choose M here: the
module will be called sh_keysc.
+
+config KEYBOARD_MAX7359
+ tristate "Maxim MAX7359 Key Switch Controller"
+ depends on I2C
+ help
+ If you say yes here you get support for the Maxim MAX7359 Key
+ Switch Controller chip. This providers microprocessors with
+ management of up to 64 key switches
+
+ To compile this driver as a module, choose M here: the
+ module will be called max7359_keypad.
endif
diff --git a/drivers/input/keyboard/Makefile b/drivers/input/keyboard/Makefile
index 36351e1..a9e7502 100644
--- a/drivers/input/keyboard/Makefile
+++ b/drivers/input/keyboard/Makefile
@@ -28,3 +28,4 @@ obj-$(CONFIG_KEYBOARD_HP7XX) += jornada720_kbd.o
obj-$(CONFIG_KEYBOARD_MAPLE) += maple_keyb.o
obj-$(CONFIG_KEYBOARD_BFIN) += bf54x-keys.o
obj-$(CONFIG_KEYBOARD_SH_KEYSC) += sh_keysc.o
+obj-$(CONFIG_KEYBOARD_MAX7359) += max7359_keypad.o
diff --git a/drivers/input/keyboard/max7359_keypad.c b/drivers/input/keyboard/max7359_keypad.c
new file mode 100644
index 0000000..918386c
--- /dev/null
+++ b/drivers/input/keyboard/max7359_keypad.c
@@ -0,0 +1,369 @@
+/*
+ * max7359_keypad.c - MAX7359 Key Switch Controller Driver
+ *
+ * Copyright (C) 2009 Samsung Electronics
+ * Kim Kyuwon <q1.kim@samsung.com>
+ *
+ * Based on pxa27x_keypad.c
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * Datasheet: http://www.maxim-ic.com/quick_view2.cfm/qv_pk/5456
+ */
+
+#include <linux/module.h>
+#include <linux/i2c.h>
+#include <linux/interrupt.h>
+#include <linux/input.h>
+#include <linux/max7359_keypad.h>
+
+#define MAX7359_MAX_KEY_ROWS 8
+#define MAX7359_MAX_KEY_COLS 8
+#define MAX7359_MAX_KEY_NUM (MAX7359_MAX_KEY_ROWS * MAX7359_MAX_KEY_COLS)
+
+/*
+ * MAX7359 registers
+ */
+#define MAX7359_REG_KEYFIFO 0x00
+#define MAX7359_REG_CONFIG 0x01
+#define MAX7359_REG_DEBOUNCE 0x02
+#define MAX7359_REG_INTERRUPT 0x03
+#define MAX7359_REG_PORTS 0x04
+#define MAX7359_REG_KEYREP 0x05
+#define MAX7359_REG_SLEEP 0x06
+
+/*
+ * Configuration register bits
+ */
+#define MAX7359_CFG_SLEEP (1 << 7)
+#define MAX7359_CFG_INTERRUPT (1 << 5)
+#define MAX7359_CFG_KEY_RELEASE (1 << 3)
+#define MAX7359_CFG_WAKEUP (1 << 1)
+#define MAX7359_CFG_TIMEOUT (1 << 0)
+
+/*
+ * Autosleep register values (ms)
+ */
+#define MAX7359_AUTOSLEEP_8192 0x01
+#define MAX7359_AUTOSLEEP_4096 0x02
+#define MAX7359_AUTOSLEEP_2048 0x03
+#define MAX7359_AUTOSLEEP_1024 0x04
+#define MAX7359_AUTOSLEEP_512 0x05
+#define MAX7359_AUTOSLEEP_256 0x06
+
+struct max7359_keypad {
+ /* matrix key code map */
+ u16 keycodes[MAX7359_MAX_KEY_NUM];
+
+ struct work_struct work;
+
+ struct max7359_keypad_platform_data *pdata;
+ struct input_dev *input_dev;
+ struct i2c_client *client;
+
+ u32 irq;
+};
+
+static int max7359_write_reg(struct i2c_client *client, u8 reg, u8 val)
+{
+ int ret = i2c_smbus_write_byte_data(client, reg, val);
+
+ if (ret >= 0)
+ return 0;
+
+ dev_err(&client->dev, "%s: reg 0x%x, val 0x%x, err %d\n",
+ __func__, reg, val, ret);
+
+ return ret;
+}
+
+static int max7359_read_reg(struct i2c_client *client, int reg)
+{
+ int ret = i2c_smbus_read_byte_data(client, reg);
+
+ if (ret < 0)
+ dev_err(&client->dev, "%s: reg 0x%x, err %d\n",
+ __func__, reg, ret);
+ return ret;
+}
+
+static void max7359_build_keycode(struct max7359_keypad *keypad)
+{
+ struct max7359_keypad_platform_data *pdata = keypad->pdata;
+ struct input_dev *input_dev = keypad->input_dev;
+ unsigned int *key;
+ int i;
+
+ key = pdata->key_map;
+ for (i = 0; i < pdata->key_map_size; i++, key++) {
+ int row = ((*key) >> 28) & 0xf;
+ int col = ((*key) >> 24) & 0xf;
+ short code = (*key) & 0xffff;
+
+ keypad->keycodes[(row << 3) + col] = code;
+ set_bit(code, input_dev->keybit);
+ }
+}
+
+static inline unsigned int max7359_lookup_matrix_keycode(
+ struct max7359_keypad *keypad, int row, int col)
+{
+ return keypad->keycodes[(row << 3) + col];
+}
+
+static void max7359_worker(struct work_struct *work)
+{
+ struct max7359_keypad *keypad =
+ container_of(work, struct max7359_keypad, work);
+ int val, row, col, release;
+
+ val = max7359_read_reg(keypad->client, MAX7359_REG_KEYFIFO);
+ row = val & 0x7;
+ col = (val >> 3) & 0x7;
+ release = val & 0x40;
+
+ input_report_key(keypad->input_dev,
+ max7359_lookup_matrix_keycode(keypad, row, col), !release);
+ input_sync(keypad->input_dev);
+
+ enable_irq(keypad->irq);
+
+ dev_dbg(&keypad->client->dev, "key[%d:%d] %s\n", row, col,
+ (release ? "release" : "press"));
+}
+
+static irqreturn_t max7359_interrupt(int irq, void *dev_id)
+{
+ struct max7359_keypad *keypad = dev_id;
+
+ if (!work_pending(&keypad->work)) {
+ disable_irq_nosync(keypad->irq);
+ schedule_work(&keypad->work);
+ } else {
+ dev_warn(&keypad->client->dev,
+ "Another job is currently pending \n");
+ }
+
+ return IRQ_HANDLED;
+}
+
+/*
+ * Let MAX7359 fall into a deep sleep:
+ * If no keys are pressed, enter sleep mode for 8192 ms. And if any
+ * key is pressed, the MAX7359 returns to normal operating mode.
+ */
+static inline void max7359_fall_deepsleep(struct i2c_client *client)
+{
+ max7359_write_reg(client, MAX7359_REG_SLEEP, MAX7359_AUTOSLEEP_8192);
+}
+
+/*
+ * Let MAX7359 take a catnap:
+ * Autosleep just for 256 ms.
+ */
+static inline void max7359_take_catnap(struct i2c_client *client)
+{
+ max7359_write_reg(client, MAX7359_REG_SLEEP, MAX7359_AUTOSLEEP_256);
+}
+
+static int max7359_open(struct input_dev *dev)
+{
+ struct max7359_keypad *keypad = input_get_drvdata(dev);
+
+ max7359_take_catnap(keypad->client);
+
+ return 0;
+}
+
+static void max7359_close(struct input_dev *dev)
+{
+ struct max7359_keypad *keypad = input_get_drvdata(dev);
+
+ max7359_fall_deepsleep(keypad->client);
+}
+
+static void max7359_initialize(struct i2c_client *client)
+{
+ max7359_write_reg(client, MAX7359_REG_CONFIG,
+ MAX7359_CFG_INTERRUPT | /* Irq clears after host read */
+ MAX7359_CFG_KEY_RELEASE | /* Key release enable */
+ MAX7359_CFG_WAKEUP); /* Key press wakeup enable */
+
+ /* Full key-scan functionality */
+ max7359_write_reg(client, MAX7359_REG_DEBOUNCE, 0x1F);
+
+ /* nINT asserts every debounce cycles */
+ max7359_write_reg(client, MAX7359_REG_INTERRUPT, 0x01);
+
+ max7359_fall_deepsleep(client);
+}
+
+static int __devinit max7359_probe(struct i2c_client *client,
+ const struct i2c_device_id *id)
+{
+ struct max7359_keypad *keypad;
+ struct max7359_keypad_platform_data *pdata;
+ struct input_dev *input_dev;
+ int ret;
+
+ keypad = kzalloc(sizeof(struct max7359_keypad), GFP_KERNEL);
+ if (keypad == NULL) {
+ dev_err(&client->dev, "failed to allocate driver data\n");
+ return -ENOMEM;
+ }
+
+ keypad->client = client;
+ pdata = keypad->pdata = client->dev.platform_data;
+ i2c_set_clientdata(client, keypad);
+
+ /* Detect MAX7359: The initial Keys FIFO value is '0x3F' */
+ ret = max7359_read_reg(client, MAX7359_REG_KEYFIFO);
+ if (ret < 0) {
+ dev_err(&client->dev, "failed to detect device\n");
+ goto failed_free;
+ } else {
+ dev_info(&client->dev, "keys FIFO is 0x%02x"
+ ", succeeded in detecting device\n", ret);
+ }
+
+ /* Initialize MAX7359 */
+ max7359_initialize(client);
+
+ /* Create and register the input driver. */
+ input_dev = input_allocate_device();
+ if (!input_dev) {
+ dev_err(&client->dev, "failed to allocate input device\n");
+ ret = -ENOMEM;
+ goto failed_free;
+ }
+
+ input_dev->name = client->name;
+ input_dev->id.bustype = BUS_I2C;
+ input_dev->open = max7359_open;
+ input_dev->close = max7359_close;
+ input_dev->dev.parent = &client->dev;
+
+ input_set_drvdata(input_dev, keypad);
+
+ input_dev->evbit[0] = BIT_MASK(EV_KEY) | BIT_MASK(EV_REP);
+ input_dev->keycodesize = sizeof(keypad->keycodes[0]);
+ input_dev->keycodemax = ARRAY_SIZE(keypad->keycodes);
+ input_dev->keycode = keypad->keycodes;
+
+ keypad->input_dev = input_dev;
+
+ max7359_build_keycode(keypad);
+
+ INIT_WORK(&keypad->work, max7359_worker);
+
+ keypad->irq = client->irq;
+ if (!keypad->irq) {
+ dev_err(&client->dev, "The irq number should not be zero\n");
+ goto failed_free_dev;
+ }
+
+ ret = request_irq(keypad->irq, max7359_interrupt,
+ IRQF_TRIGGER_LOW, client->name, keypad);
+ if (ret) {
+ dev_err(&client->dev, "failed to register interrupt\n");
+ goto failed_free_dev;
+ }
+
+ /* Register the input device */
+ ret = input_register_device(input_dev);
+ if (ret) {
+ dev_err(&client->dev, "failed to register input device\n");
+ goto failed_free_irq;
+ }
+
+ device_init_wakeup(&client->dev, 1);
+
+ return 0;
+
+failed_free_irq:
+ free_irq(keypad->irq, keypad);
+failed_free_dev:
+ input_free_device(input_dev);
+failed_free:
+ i2c_set_clientdata(client, NULL);
+ kfree(keypad);
+ return ret;
+}
+
+static int __devexit max7359_remove(struct i2c_client *client)
+{
+ struct max7359_keypad *keypad = i2c_get_clientdata(client);
+
+ cancel_work_sync(&keypad->work);
+ input_unregister_device(keypad->input_dev);
+ free_irq(keypad->irq, keypad);
+ i2c_set_clientdata(client, NULL);
+ kfree(keypad);
+
+ return 0;
+}
+
+#ifdef CONFIG_PM
+static int max7359_suspend(struct i2c_client *client, pm_message_t mesg)
+{
+ struct max7359_keypad *keypad = i2c_get_clientdata(client);
+
+ max7359_fall_deepsleep(client);
+
+ if (device_may_wakeup(&client->dev))
+ enable_irq_wake(keypad->irq);
+
+ return 0;
+}
+
+static int max7359_resume(struct i2c_client *client)
+{
+ struct max7359_keypad *keypad = i2c_get_clientdata(client);
+
+ if (device_may_wakeup(&client->dev))
+ disable_irq_wake(keypad->irq);
+
+ /* Restore the default setting */
+ max7359_take_catnap(client);
+
+ return 0;
+}
+#else
+#define max7359_suspend NULL
+#define max7359_resume NULL
+#endif
+
+static const struct i2c_device_id max7359_ids[] = {
+ { "max7359", 0 },
+ { }
+};
+MODULE_DEVICE_TABLE(i2c, max7359_ids);
+
+static struct i2c_driver max7359_i2c_driver = {
+ .driver = {
+ .name = "max7359",
+ },
+ .probe = max7359_probe,
+ .remove = __devexit_p(max7359_remove),
+ .suspend = max7359_suspend,
+ .resume = max7359_resume,
+ .id_table = max7359_ids,
+};
+
+static int __init max7359_init(void)
+{
+ return i2c_add_driver(&max7359_i2c_driver);
+}
+module_init(max7359_init);
+
+static void __exit max7359_exit(void)
+{
+ i2c_del_driver(&max7359_i2c_driver);
+}
+module_exit(max7359_exit);
+
+MODULE_AUTHOR("Kim Kyuwon <q1.kim@samsung.com>");
+MODULE_DESCRIPTION("MAX7359 Key Switch Controller Driver");
+MODULE_LICENSE("GPL v2");
diff --git a/include/linux/max7359_keypad.h b/include/linux/max7359_keypad.h
new file mode 100644
index 0000000..0541598
--- /dev/null
+++ b/include/linux/max7359_keypad.h
@@ -0,0 +1,27 @@
+/*
+ * max7359_keypad.h - MAX7359 Keypad Controller Driver
+ *
+ * Copyright (C) 2009 Samsung Electronics
+ * Kim Kyuwon <q1.kim@samsung.com>
+ *
+ * Based on pxa27x_keypad.c
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * Datasheet: http://www.maxim-ic.com/quick_view2.cfm/qv_pk/5456
+ */
+
+#ifndef _MAX7359_KEYPAD_H_
+#define _MAX7359_KEYPAD_H_
+
+struct max7359_keypad_platform_data {
+ /* code map for the keys */
+ unsigned int *key_map;
+ unsigned int key_map_size;
+};
+
+#define KEY(row, col, val) (((row) << 28) | ((col) << 24) | (val))
+
+#endif /* _MAX7359_KEYPAD_H_ */
--
1.5.2.5
next reply other threads:[~2009-05-09 2:20 UTC|newest]
Thread overview: 28+ messages / expand[flat|nested] mbox.gz Atom feed top
2009-05-09 2:09 Kim Kyuwon [this message]
2009-05-09 17:27 ` [PATCH] Input: add MAX7359 key switch controller driver, v2 Trilok Soni
2009-05-09 20:01 ` Dmitry Torokhov
2009-05-11 1:51 ` Kim Kyuwon
2009-05-11 2:08 ` Dmitry Torokhov
2009-05-11 2:34 ` Kim Kyuwon
2009-05-11 2:34 ` Kim Kyuwon
2009-05-11 3:12 ` Dmitry Torokhov
2009-06-19 17:38 ` Trilok Soni
2009-07-13 8:52 ` Trilok Soni
2009-07-13 9:31 ` Dmitry Torokhov
2009-07-14 3:09 ` Kim Kyuwon
2009-07-14 6:28 ` Marek Szyprowski
2009-07-14 8:24 ` Dmitry Torokhov
2009-07-14 8:53 ` Trilok Soni
2009-07-14 9:07 ` Marek Szyprowski
2009-07-14 9:11 ` Trilok Soni
2009-07-14 10:18 ` Marek Szyprowski
2009-07-14 10:23 ` Trilok Soni
2009-07-14 10:23 ` Trilok Soni
2009-07-15 7:15 ` Marek Szyprowski
2009-07-15 7:15 ` Marek Szyprowski
2009-09-16 8:57 ` Dmitry Torokhov
2009-09-16 8:57 ` Dmitry Torokhov
2009-09-18 8:14 ` Joonyoung Shim
2009-09-18 8:14 ` Joonyoung Shim
2009-09-18 16:39 ` Dmitry Torokhov
2009-09-19 0:07 ` Joonyoung Shim
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=4A04E5EA.7000103@samsung.com \
--to=q1.kim@samsung.com \
--cc=dmitry.torokhov@gmail.com \
--cc=kyungmin.park@samsung.com \
--cc=linux-input@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=m.szyprowski@samsung.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.