MacbookPro5,1 & hda-analyzer

* MacbookPro5,1 & hda-analyzer
@ 2009-05-11 18:11 Ozan Çağlayan
  2009-05-11 19:53 ` Ozan Çağlayan
  0 siblings, 1 reply; 3+ messages in thread
From: Ozan Çağlayan @ 2009-05-11 18:11 UTC (permalink / raw)
  To: alsa-devel

Hi,

I just bought a MacbookPro5,1 and having difficulties with the onboard
HDA chipset.

* No sound can be heard of it if model= is not set to mbp3:
  [   12.009422] hda_codec: Unknown model for ALC883, trying auto-probe
from BIOS...
  http://www.alsa-project.org/db/?f=4b2f257e72523bccafd3ace1d3c7044fb5f09ff8

* If model=mbp3 is given, it's possible to get sound from it but with
many annoying problems:

  - You have to switch to 6ch mode for getting sound, doesn't work with
2ch mode,
  - The sound quality is very very bad,
  - Once you switch to 6ch mode,
    - You have to increment the volume of *Line-in* to have hearable
sound from *internal speakers*,
    - You have to increment the volume of *Front* to have hearable sound
from *headphones*,
    - The two controls are not mutually exclusive, you have to mute one
of them, if you're using the other.

And then I decided to play with hda-analyzer. After a bit of playing, I
started to get sound from the board
without the model=mbp3. But the mixers are still behaving somewhat
strange. Before actually reporting any feedback
on what I've switched and did, what do you suggest me to do? Is setting
the model= to something, something similar to what
I was doing with hda-analyzer?

Thanks
Ozan Caglayan

^ permalink raw reply	[flat|nested] 3+ messages in thread