All of lore.kernel.org
 help / color / mirror / Atom feed
* [PATCH] snd-hda-intel: add controls to toggle DC bias on mic ports
@ 2009-05-13 18:43 Nickolas Lloyd
  2009-05-13 19:12 ` Nickolas Lloyd
  2009-05-15 13:58 ` Takashi Iwai
  0 siblings, 2 replies; 5+ messages in thread
From: Nickolas Lloyd @ 2009-05-13 18:43 UTC (permalink / raw)
  To: Takashi Iwai; +Cc: alsa-devel, Matthew Ranostay

This patch adds a mixer control for the STAC92XX boards to control the
DC bias of mic ports, allowing recording from both powered and
non-powered sources.  It replaces the "Mic Output Switch" with "Mic Jack
Mode" to switch between Mic, Line In, and Line Out.

Signed-off by: Nickolas Lloyd <ultrageek.lloyd@gmail.com>

Note: diffed against alsa-driver-20090513

----
diff -urpN alsa-driver/sound/pci/hda/patch_sigmatel.c
alsa-driver.a/sound/pci/hda/patch_sigmatel.c
--- alsa-driver/sound/pci/hda/patch_sigmatel.c    2009-05-12
22:05:31.000000000 +0000
+++ alsa-driver.a/sound/pci/hda/patch_sigmatel.c    2009-05-13
12:24:17.000000000 +0000
@@ -634,6 +634,96 @@ static int stac92xx_smux_enum_put(struct
     return 0;
 }
 
+static unsigned int stac92xx_vref_set(struct hda_codec *codec,
+                    hda_nid_t nid, unsigned int new_vref)
+{
+    unsigned int error;
+    unsigned int pincfg;
+    pincfg = snd_hda_codec_read(codec, nid, 0,
+                AC_VERB_GET_PIN_WIDGET_CONTROL, 0);
+
+    pincfg &= 0xff;
+    pincfg &= ~(AC_PINCTL_VREFEN | AC_PINCTL_IN_EN | AC_PINCTL_OUT_EN);
+    pincfg |= new_vref;
+
+    if (new_vref == AC_PINCTL_VREF_HIZ)
+        pincfg |= AC_PINCTL_OUT_EN;
+    else
+        pincfg |= AC_PINCTL_IN_EN;
+
+    error = snd_hda_codec_write_cache(codec, nid, 0,
+                    AC_VERB_SET_PIN_WIDGET_CONTROL, pincfg);
+    if (error < 0)
+        return error;
+    else
+        return 1;
+}
+
+static unsigned int stac92xx_vref_get(struct hda_codec *codec,
hda_nid_t nid)
+{
+    unsigned int vref;
+    vref = snd_hda_codec_read(codec, nid, 0,
+                AC_VERB_GET_PIN_WIDGET_CONTROL, 0);
+    vref &= AC_PINCTL_VREFEN;
+    return vref;
+}
+
+static int stac92xx_dc_bias_put(struct snd_kcontrol *kcontrol,
+                struct snd_ctl_elem_value *ucontrol)
+{
+    struct hda_codec *codec = snd_kcontrol_chip(kcontrol);
+    unsigned int new_vref;
+    unsigned int error;
+
+    if (ucontrol->value.enumerated.item[0] == 0)
+        new_vref = AC_PINCTL_VREF_80;
+    else if (ucontrol->value.enumerated.item[0] == 1)
+        new_vref = AC_PINCTL_VREF_GRD;
+    else
+        new_vref = AC_PINCTL_VREF_HIZ;
+
+    if (new_vref != stac92xx_vref_get(codec, kcontrol->private_value)) {
+        error = stac92xx_vref_set(codec,
+                    kcontrol->private_value, new_vref);
+        return error;
+    }
+
+    return 0;
+}
+
+static int stac92xx_dc_bias_get(struct snd_kcontrol *kcontrol,
+                struct snd_ctl_elem_value *ucontrol)
+{
+    struct hda_codec *codec = snd_kcontrol_chip(kcontrol);
+    unsigned int vref = stac92xx_vref_get(codec, kcontrol->private_value);
+    if (vref == AC_PINCTL_VREF_80)
+        ucontrol->value.enumerated.item[0] = 0;
+    else if (vref == AC_PINCTL_VREF_GRD)
+        ucontrol->value.enumerated.item[0] = 1;
+    else if (vref == AC_PINCTL_VREF_HIZ)
+        ucontrol->value.enumerated.item[0] = 2;
+
+    return 0;
+}
+
+static int stac92xx_dc_bias_info(struct snd_kcontrol *kcontrol,
+                struct snd_ctl_elem_info *uinfo)
+{
+    static char *texts[] = {
+        "Mic In", "Line In", "Line Out"
+    };
+
+    uinfo->type = SNDRV_CTL_ELEM_TYPE_ENUMERATED;
+    uinfo->value.enumerated.items = 3;
+    uinfo->count = 1;
+    if (uinfo->value.enumerated.item >= 3)
+        uinfo->value.enumerated.item = 2;
+    strcpy(uinfo->value.enumerated.name,
+        texts[uinfo->value.enumerated.item]);
+
+    return 0;
+}
+
 static int stac92xx_mux_enum_info(struct snd_kcontrol *kcontrol, struct
snd_ctl_elem_info *uinfo)
 {
     struct hda_codec *codec = snd_kcontrol_chip(kcontrol);
@@ -995,6 +1085,17 @@ static struct hda_verb stac9205_core_ini
         .private_value = verb_read | (verb_write << 16), \
     }
 
+#define DC_BIAS(xname, idx, nid) \
+    { \
+        .iface = SNDRV_CTL_ELEM_IFACE_MIXER, \
+        .name = xname, \
+        .index = idx, \
+        .info = stac92xx_dc_bias_info, \
+        .get = stac92xx_dc_bias_get, \
+        .put = stac92xx_dc_bias_put, \
+        .private_value = nid, \
+    }
+
 static struct snd_kcontrol_new stac9200_mixer[] = {
     HDA_CODEC_VOLUME("Master Playback Volume", 0xb, 0, HDA_OUTPUT),
     HDA_CODEC_MUTE("Master Playback Switch", 0xb, 0, HDA_OUTPUT),
@@ -2702,7 +2803,8 @@ enum {
     STAC_CTL_WIDGET_AMP_VOL,
     STAC_CTL_WIDGET_HP_SWITCH,
     STAC_CTL_WIDGET_IO_SWITCH,
-    STAC_CTL_WIDGET_CLFE_SWITCH
+    STAC_CTL_WIDGET_CLFE_SWITCH,
+    STAC_CTL_WIDGET_DC_BIAS
 };
 
 static struct snd_kcontrol_new stac92xx_control_templates[] = {
@@ -2714,6 +2816,7 @@ static struct snd_kcontrol_new stac92xx_
     STAC_CODEC_HP_SWITCH(NULL),
     STAC_CODEC_IO_SWITCH(NULL, 0),
     STAC_CODEC_CLFE_SWITCH(NULL, 0),
+    DC_BIAS(NULL, 0, 0),
 };
 
 /* add dynamic controls */
@@ -3165,9 +3268,9 @@ static int stac92xx_auto_create_multi_ou
     }
 
     if (spec->mic_switch) {
-        err = stac92xx_add_control(spec, STAC_CTL_WIDGET_IO_SWITCH,
-                       "Mic as Output Switch",
-                       (spec->mic_switch << 8) | 1);
+        err = stac92xx_add_control(spec, STAC_CTL_WIDGET_DC_BIAS,
+                       "Mic Jack Mode",
+                       spec->mic_switch);
         if (err < 0)
             return err;
     }

^ permalink raw reply	[flat|nested] 5+ messages in thread

* Re: [PATCH] snd-hda-intel: add controls to toggle DC bias on mic ports
  2009-05-13 18:43 [PATCH] snd-hda-intel: add controls to toggle DC bias on mic ports Nickolas Lloyd
@ 2009-05-13 19:12 ` Nickolas Lloyd
  2009-05-15 13:58 ` Takashi Iwai
  1 sibling, 0 replies; 5+ messages in thread
From: Nickolas Lloyd @ 2009-05-13 19:12 UTC (permalink / raw)
  To: Takashi Iwai; +Cc: alsa-devel, Matthew Ranostay

[-- Attachment #1: Type: text/plain, Size: 76 bytes --]

attached: version WITHOUT word wrap.  I apologize for the last email.

Nick

[-- Attachment #2: snd-hda-intel.patch --]
[-- Type: text/plain, Size: 4366 bytes --]

diff -urpN alsa-driver/sound/pci/hda/patch_sigmatel.c alsa-driver.a/sound/pci/hda/patch_sigmatel.c
--- alsa-driver/sound/pci/hda/patch_sigmatel.c	2009-05-12 22:05:31.000000000 +0000
+++ alsa-driver.a/sound/pci/hda/patch_sigmatel.c	2009-05-13 12:24:17.000000000 +0000
@@ -634,6 +634,96 @@ static int stac92xx_smux_enum_put(struct
 	return 0;
 }
 
+static unsigned int stac92xx_vref_set(struct hda_codec *codec,
+					hda_nid_t nid, unsigned int new_vref)
+{
+	unsigned int error;
+	unsigned int pincfg;
+	pincfg = snd_hda_codec_read(codec, nid, 0,
+				AC_VERB_GET_PIN_WIDGET_CONTROL, 0);
+
+	pincfg &= 0xff;
+	pincfg &= ~(AC_PINCTL_VREFEN | AC_PINCTL_IN_EN | AC_PINCTL_OUT_EN);
+	pincfg |= new_vref;
+
+	if (new_vref == AC_PINCTL_VREF_HIZ)
+		pincfg |= AC_PINCTL_OUT_EN;
+	else
+		pincfg |= AC_PINCTL_IN_EN;
+
+	error = snd_hda_codec_write_cache(codec, nid, 0,
+					AC_VERB_SET_PIN_WIDGET_CONTROL, pincfg);
+	if (error < 0)
+		return error;
+	else
+		return 1;
+}
+
+static unsigned int stac92xx_vref_get(struct hda_codec *codec, hda_nid_t nid)
+{
+	unsigned int vref;
+	vref = snd_hda_codec_read(codec, nid, 0,
+				AC_VERB_GET_PIN_WIDGET_CONTROL, 0);
+	vref &= AC_PINCTL_VREFEN;
+	return vref;
+}
+
+static int stac92xx_dc_bias_put(struct snd_kcontrol *kcontrol,
+				struct snd_ctl_elem_value *ucontrol)
+{
+	struct hda_codec *codec = snd_kcontrol_chip(kcontrol);
+	unsigned int new_vref;
+	unsigned int error;
+
+	if (ucontrol->value.enumerated.item[0] == 0)
+		new_vref = AC_PINCTL_VREF_80;
+	else if (ucontrol->value.enumerated.item[0] == 1)
+		new_vref = AC_PINCTL_VREF_GRD;
+	else
+		new_vref = AC_PINCTL_VREF_HIZ;
+
+	if (new_vref != stac92xx_vref_get(codec, kcontrol->private_value)) {
+		error = stac92xx_vref_set(codec,
+					kcontrol->private_value, new_vref);
+		return error;
+	}
+
+	return 0;
+}
+
+static int stac92xx_dc_bias_get(struct snd_kcontrol *kcontrol,
+				struct snd_ctl_elem_value *ucontrol)
+{
+	struct hda_codec *codec = snd_kcontrol_chip(kcontrol);
+	unsigned int vref = stac92xx_vref_get(codec, kcontrol->private_value);
+	if (vref == AC_PINCTL_VREF_80)
+		ucontrol->value.enumerated.item[0] = 0;
+	else if (vref == AC_PINCTL_VREF_GRD)
+		ucontrol->value.enumerated.item[0] = 1;
+	else if (vref == AC_PINCTL_VREF_HIZ)
+		ucontrol->value.enumerated.item[0] = 2;
+
+	return 0;
+}
+
+static int stac92xx_dc_bias_info(struct snd_kcontrol *kcontrol,
+				struct snd_ctl_elem_info *uinfo)
+{
+	static char *texts[] = {
+		"Mic In", "Line In", "Line Out"
+	};
+
+	uinfo->type = SNDRV_CTL_ELEM_TYPE_ENUMERATED;
+	uinfo->value.enumerated.items = 3;
+	uinfo->count = 1;
+	if (uinfo->value.enumerated.item >= 3)
+		uinfo->value.enumerated.item = 2;
+	strcpy(uinfo->value.enumerated.name,
+		texts[uinfo->value.enumerated.item]);
+
+	return 0;
+}
+
 static int stac92xx_mux_enum_info(struct snd_kcontrol *kcontrol, struct snd_ctl_elem_info *uinfo)
 {
 	struct hda_codec *codec = snd_kcontrol_chip(kcontrol);
@@ -995,6 +1085,17 @@ static struct hda_verb stac9205_core_ini
 		.private_value = verb_read | (verb_write << 16), \
 	}
 
+#define DC_BIAS(xname, idx, nid) \
+	{ \
+		.iface = SNDRV_CTL_ELEM_IFACE_MIXER, \
+		.name = xname, \
+		.index = idx, \
+		.info = stac92xx_dc_bias_info, \
+		.get = stac92xx_dc_bias_get, \
+		.put = stac92xx_dc_bias_put, \
+		.private_value = nid, \
+	}
+
 static struct snd_kcontrol_new stac9200_mixer[] = {
 	HDA_CODEC_VOLUME("Master Playback Volume", 0xb, 0, HDA_OUTPUT),
 	HDA_CODEC_MUTE("Master Playback Switch", 0xb, 0, HDA_OUTPUT),
@@ -2702,7 +2803,8 @@ enum {
 	STAC_CTL_WIDGET_AMP_VOL,
 	STAC_CTL_WIDGET_HP_SWITCH,
 	STAC_CTL_WIDGET_IO_SWITCH,
-	STAC_CTL_WIDGET_CLFE_SWITCH
+	STAC_CTL_WIDGET_CLFE_SWITCH,
+	STAC_CTL_WIDGET_DC_BIAS
 };
 
 static struct snd_kcontrol_new stac92xx_control_templates[] = {
@@ -2714,6 +2816,7 @@ static struct snd_kcontrol_new stac92xx_
 	STAC_CODEC_HP_SWITCH(NULL),
 	STAC_CODEC_IO_SWITCH(NULL, 0),
 	STAC_CODEC_CLFE_SWITCH(NULL, 0),
+	DC_BIAS(NULL, 0, 0),
 };
 
 /* add dynamic controls */
@@ -3165,9 +3268,9 @@ static int stac92xx_auto_create_multi_ou
 	}
 
 	if (spec->mic_switch) {
-		err = stac92xx_add_control(spec, STAC_CTL_WIDGET_IO_SWITCH,
-					   "Mic as Output Switch",
-					   (spec->mic_switch << 8) | 1);
+		err = stac92xx_add_control(spec, STAC_CTL_WIDGET_DC_BIAS,
+					   "Mic Jack Mode",
+					   spec->mic_switch);
 		if (err < 0)
 			return err;
 	}

[-- Attachment #3: Type: text/plain, Size: 160 bytes --]

_______________________________________________
Alsa-devel mailing list
Alsa-devel@alsa-project.org
http://mailman.alsa-project.org/mailman/listinfo/alsa-devel

^ permalink raw reply	[flat|nested] 5+ messages in thread

* Re: [PATCH] snd-hda-intel: add controls to toggle DC bias on mic ports
  2009-05-13 18:43 [PATCH] snd-hda-intel: add controls to toggle DC bias on mic ports Nickolas Lloyd
  2009-05-13 19:12 ` Nickolas Lloyd
@ 2009-05-15 13:58 ` Takashi Iwai
  2009-05-15 15:17   ` Nickolas Lloyd
  1 sibling, 1 reply; 5+ messages in thread
From: Takashi Iwai @ 2009-05-15 13:58 UTC (permalink / raw)
  To: Nickolas Lloyd; +Cc: alsa-devel, Matthew Ranostay

At Wed, 13 May 2009 18:43:04 +0000,
Nickolas Lloyd wrote:
> 
> This patch adds a mixer control for the STAC92XX boards to control the
> DC bias of mic ports, allowing recording from both powered and
> non-powered sources.  It replaces the "Mic Output Switch" with "Mic Jack
> Mode" to switch between Mic, Line In, and Line Out.
> 
> Signed-off by: Nickolas Lloyd <ultrageek.lloyd@gmail.com>
> 
> Note: diffed against alsa-driver-20090513

Thanks, applied now.

BTW, I think we should change also "Line as Output Switch" to "Line-In
Jack Mode" or so to make the code consistent.  Care to create a patch?


Takashi

^ permalink raw reply	[flat|nested] 5+ messages in thread

* Re: [PATCH] snd-hda-intel: add controls to toggle DC bias on mic ports
  2009-05-15 13:58 ` Takashi Iwai
@ 2009-05-15 15:17   ` Nickolas Lloyd
  2009-05-19 13:13     ` Takashi Iwai
  0 siblings, 1 reply; 5+ messages in thread
From: Nickolas Lloyd @ 2009-05-15 15:17 UTC (permalink / raw)
  To: Takashi Iwai; +Cc: alsa-devel, Matthew Ranostay

Takashi Iwai wrote:
> At Wed, 13 May 2009 18:43:04 +0000,
> Nickolas Lloyd wrote:
>   
>> This patch adds a mixer control for the STAC92XX boards to control the
>> DC bias of mic ports, allowing recording from both powered and
>> non-powered sources.  It replaces the "Mic Output Switch" with "Mic Jack
>> Mode" to switch between Mic, Line In, and Line Out.
>>
>> Signed-off by: Nickolas Lloyd <ultrageek.lloyd@gmail.com>
>>
>> Note: diffed against alsa-driver-20090513
>>     
>
> Thanks, applied now.
>
> BTW, I think we should change also "Line as Output Switch" to "Line-In
> Jack Mode" or so to make the code consistent.  Care to create a patch?
>
>
> Takashi
>
>   
I'd be happy to.  Also, as it is now, the control will only be added if
autocfg.line_out_type is set to AUTO_PIN_LINE_OUT, so this control may
not be added for all mic ports.  I was thinking of making the enum show
only two entries, Line in and Mic in for these other mics.  Thoughts?

Thanks,
Nick

^ permalink raw reply	[flat|nested] 5+ messages in thread

* Re: [PATCH] snd-hda-intel: add controls to toggle DC bias on mic ports
  2009-05-15 15:17   ` Nickolas Lloyd
@ 2009-05-19 13:13     ` Takashi Iwai
  0 siblings, 0 replies; 5+ messages in thread
From: Takashi Iwai @ 2009-05-19 13:13 UTC (permalink / raw)
  To: Nickolas Lloyd; +Cc: alsa-devel, Matthew Ranostay

At Fri, 15 May 2009 15:17:27 +0000,
Nickolas Lloyd wrote:
> 
> Takashi Iwai wrote:
> > At Wed, 13 May 2009 18:43:04 +0000,
> > Nickolas Lloyd wrote:
> >   
> >> This patch adds a mixer control for the STAC92XX boards to control the
> >> DC bias of mic ports, allowing recording from both powered and
> >> non-powered sources.  It replaces the "Mic Output Switch" with "Mic Jack
> >> Mode" to switch between Mic, Line In, and Line Out.
> >>
> >> Signed-off by: Nickolas Lloyd <ultrageek.lloyd@gmail.com>
> >>
> >> Note: diffed against alsa-driver-20090513
> >>     
> >
> > Thanks, applied now.
> >
> > BTW, I think we should change also "Line as Output Switch" to "Line-In
> > Jack Mode" or so to make the code consistent.  Care to create a patch?
> >
> >
> > Takashi
> >
> >   
> I'd be happy to.  Also, as it is now, the control will only be added if
> autocfg.line_out_type is set to AUTO_PIN_LINE_OUT, so this control may
> not be added for all mic ports.  I was thinking of making the enum show
> only two entries, Line in and Mic in for these other mics.  Thoughts?

Sounds reasonable.  Go ahead!


Takashi

^ permalink raw reply	[flat|nested] 5+ messages in thread

end of thread, other threads:[~2009-05-19 13:13 UTC | newest]

Thread overview: 5+ messages (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
2009-05-13 18:43 [PATCH] snd-hda-intel: add controls to toggle DC bias on mic ports Nickolas Lloyd
2009-05-13 19:12 ` Nickolas Lloyd
2009-05-15 13:58 ` Takashi Iwai
2009-05-15 15:17   ` Nickolas Lloyd
2009-05-19 13:13     ` Takashi Iwai

This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.