* BUG: blank screen - unless keyboard/synaptic combo
@ 2009-05-19 18:38 Niel Lambrechts
2009-05-21 22:40 ` Niel Lambrechts
2009-05-21 22:58 ` Niel Lambrechts
0 siblings, 2 replies; 9+ messages in thread
From: Niel Lambrechts @ 2009-05-19 18:38 UTC (permalink / raw)
To: linux-kernel
[-- Attachment #1: Type: text/plain, Size: 1580 bytes --]
Hi there,
I have a strange problem in that during a resume from hibernate my text
console (or X) remains blank - that is, until I simultaneously press a
keyboard key and touch the synaptic pad.
It is not sufficient to press just one or the other, it needs to be done
simultaneously and it resumes fine after doing this. I might be wrong
but to me actually looks like the first resume script
(/usr/lib/pm-utils/sleep.d/99info) is only invoked after this
"recovery", since I notice a "Resuming" message without a command-line
prompt in the first few seconds after recovery, so it has just started
or is still executing the resume scripts.
After the grub menu, the laptop will actually display vesafb output
(vga=791) until just after 100% loading of the hibernation image, then
the display will go blank. The laptop is a Lenovo W500 with 'hybrid'
graphics, and the Intel Mobile 4 integrated adapter is set to active.
This happens in 2.6.28, 2.6.29 and up to 2.6.30-rc6. I have had a slight
few occurrences where this did not happen (not recently), but I could
never find an explanation for the difference.
I eventually gave up on bisecting this, but it definitely still happened
in bisects just after ext4dev was renamed to ext4 somewhere after 2.6.27.
Any ideas on what I can do next? I have even tried enabling extra ACPI
debugging, but I simply do not see any debugging messages happen during
that key/synaptic combination.
Would the fact that it happens in a text console session perhaps imply
that it is ACPI or vesafb related?
Thanks in advance!
Niel
[-- Attachment #2: pm-suspend.log --]
[-- Type: text/x-log, Size: 9963 bytes --]
2009-05-19 17:41:13.992560206 +0200: running 'hibernate'/'hibernate'/'' hooks.
===== 2009-05-19 17:41:14.087960120 running hook: /usr/lib/pm-utils/sleep.d/00clear =====
===== 2009-05-19 17:41:14.154333370 running hook: /usr/lib/pm-utils/sleep.d/01logging =====
hibernate initiated: Tue May 19 17:41:14 SAST 2009
Linux linux-7vph 2.6.30-rc6-pae #47 SMP Mon May 18 00:42:36 SAST 2009 i686 i686 i386 GNU/Linux
kernel command line: 'root=/dev/disk/by-id/ata-HITACHI_HTS722020K9SA00_FDE_080726DP0470DTGMUNPC-part6 resume=/dev/disk/by-id/ata-HITACHI_HTS722020K9SA00_FDE_080726DP0470DTGMUNPC-part5 splash=silent showopts vga=791'
Module Size Used by
usbhid 31700 0
hid 34812 1 usbhid
nls_utf8 1500 0
tun 11476 0
i915 144076 0
drm 125048 1 i915
i2c_algo_bit 4792 1 i915
af_packet 15580 0
ip6t_LOG 4948 8
xt_tcpudp 2536 10
xt_pkttype 1368 3
ipt_LOG 4912 9
xt_limit 2044 17
snd_pcm_oss 38248 0
snd_mixer_oss 13788 1 snd_pcm_oss
snd_seq 45068 0
binfmt_misc 7204 1
ip6t_REJECT 3140 3
nf_conntrack_ipv6 11540 6
ip6table_raw 1744 1
xt_NOTRACK 1372 4
ipt_REJECT 2516 3
xt_state 1784 12
iptable_raw 1752 1
iptable_filter 2268 1
cpufreq_conservative 6580 0
cpufreq_userspace 2692 0
ip6table_mangle 2196 0
cpufreq_powersave 1300 0
acpi_cpufreq 7600 0
nf_conntrack_netbios_ns 2100 0
nf_conntrack_ipv4 7244 6
speedstep_lib 3812 0
nf_conntrack 49016 5 nf_conntrack_ipv6,xt_NOTRACK,xt_state,nf_conntrack_netbios_ns,nf_conntrack_ipv4
nf_defrag_ipv4 1564 1 nf_conntrack_ipv4
ip_tables 10032 2 iptable_raw,iptable_filter
ip6table_filter 2180 1
ip6_tables 11016 4 ip6t_LOG,ip6table_raw,ip6table_mangle,ip6table_filter
x_tables 12092 11 ip6t_LOG,xt_tcpudp,xt_pkttype,ipt_LOG,xt_limit,ip6t_REJECT,xt_NOTRACK,ipt_REJECT,xt_state,ip_tables,ip6_tables
ipv6 216400 27 ip6t_REJECT,nf_conntrack_ipv6,ip6table_mangle
microcode 8296 0
fuse 48456 9
loop 13380 0
dm_mod 47072 0
snd_usb_audio 75372 0
snd_usb_lib 13820 1 snd_usb_audio
snd_rawmidi 18552 1 snd_usb_lib
snd_seq_device 5980 2 snd_seq,snd_rawmidi
arc4 1580 0
ecb 2396 0
iwlcore 80604 0
thinkpad_acpi 56216 0
rfkill 8652 3 iwlcore,thinkpad_acpi
ohci1394 25892 0
led_class 3496 2 iwlcore,thinkpad_acpi
mac80211 148200 1 iwlcore
battery 10332 0
ac 4156 0
video 19160 1 i915
ieee1394 67476 1 ohci1394
nvram 6004 1 thinkpad_acpi
rtc_cmos 9444 0
rtc_core 14588 1 rtc_cmos
rtc_lib 2204 1 rtc_core
output 2416 1 video
wmi 5596 0
snd_hda_codec_conexant 23712 1
snd_hda_intel 23972 0
snd_hda_codec 52592 2 snd_hda_codec_conexant,snd_hda_intel
snd_hwdep 6416 2 snd_usb_audio,snd_hda_codec
snd_pcm 63392 4 snd_pcm_oss,snd_usb_audio,snd_hda_intel,snd_hda_codec
snd_timer 17972 2 snd_seq,snd_pcm
snd 49816 13 snd_pcm_oss,snd_mixer_oss,snd_seq,snd_usb_audio,snd_usb_lib,snd_rawmidi,snd_seq_device,snd_hda_codec_conexant,snd_hda_intel,snd_hda_codec,snd_hwdep,snd_pcm,snd_timer
soundcore 5416 1 snd
button 5380 0
iTCO_wdt 10228 0
intel_agp 23076 1
snd_page_alloc 7472 2 snd_hda_intel,snd_pcm
e1000e 100340 0
agpgart 26992 2 drm,intel_agp
iTCO_vendor_support 2708 1 iTCO_wdt
cfg80211 53828 2 iwlcore,mac80211
i2c_i801 8384 0
i2c_core 17772 4 i915,drm,i2c_algo_bit,i2c_i801
sr_mod 12424 0
joydev 8964 0
cdrom 28916 1 sr_mod
sg 25260 0
sd_mod 24140 7
ehci_hcd 30436 0
uhci_hcd 19364 0
usbcore 119720 6 usbhid,snd_usb_audio,snd_usb_lib,ehci_hcd,uhci_hcd
ext4 189060 1
jbd2 55080 1 ext4
crc16 1608 1 ext4
edd 7180 0
ext3 110744 1
mbcache 6256 2 ext4,ext3
jbd 46980 1 ext3
fan 4080 0
ahci 28240 6
libata 137636 1 ahci
scsi_mod 125084 4 sr_mod,sg,sd_mod,libata
thermal 13944 0
processor 39740 3 acpi_cpufreq
total used free shared buffers cached
Mem: 2018872 863040 1155832 0 110480 716580
-/+ buffers/cache: 35980 1982892
Swap: 2099328 10812 2088516
===== 2009-05-19 17:41:14.203097953 running hook: /usr/lib/pm-utils/sleep.d/02rtcwake =====
rtcwake alarm not enabled in /etc/pm/config.d/rtcwake.config, doing nothing...
===== 2009-05-19 17:41:14.216141442 running hook: /usr/lib/pm-utils/sleep.d/05led =====
===== 2009-05-19 17:41:14.227658409 running hook: /usr/lib/pm-utils/sleep.d/06autofs =====
===== 2009-05-19 17:41:14.352373002 running hook: /usr/lib/pm-utils/sleep.d/10NetworkManager =====
method return sender=:1.6 -> dest=:1.424 reply_serial=2
===== 2009-05-19 17:41:14.467820843 running hook: /usr/lib/pm-utils/sleep.d/30s2disk-check =====
INFO: checking for suspend-to-disk prerequisites...
using userspace suspend method
setting resume device to /dev/sda5
setting image size to 930296217
adding these parameters from /etc/suspend.conf:
===== 2009-05-19 17:41:14.519640212 running hook: /usr/lib/pm-utils/sleep.d/45pcmcia =====
ejecting PCMCIA cards...
===== 2009-05-19 17:41:14.549873943 running hook: /usr/lib/pm-utils/sleep.d/50modules =====
===== 2009-05-19 17:41:14.586688750 running hook: /usr/lib/pm-utils/sleep.d/80acpi-fan =====
===== 2009-05-19 17:41:14.597395280 running hook: /usr/lib/pm-utils/sleep.d/80videobios =====
===== 2009-05-19 17:41:14.608098318 running hook: /usr/lib/pm-utils/sleep.d/94cpufreq =====
===== 2009-05-19 17:41:14.658163206 running hook: /usr/lib/pm-utils/sleep.d/95led =====
===== 2009-05-19 17:41:14.661601422 running hook: /usr/lib/pm-utils/sleep.d/95packagekit =====
===== 2009-05-19 17:41:14.680630798 running hook: /usr/lib/pm-utils/sleep.d/98video =====
===== 2009-05-19 17:41:14.704497938 running hook: /usr/lib/pm-utils/sleep.d/99Zgrub =====
INFO: running prepare-grub
Skipping grub entry #2, because it has the noresume option
Skipping grub entry #4, because it has the noresume option
Skipping grub entry #7, because it has the noresume option
Skipping grub entry #10, because it has the noresume option
stat: cannot stat `UUID=3a6813e1-ea3c-403b-8b0a-cc8577e07d76': No such file or directory
Skipping grub entry #12, because its root= parameter (UUID=3a6813e1-ea3c-403b-8b0a-cc8577e07d76)
does not match the current root device (/dev/sda6).
running kernel is grub menu entry 0 (vmlinuz-2.6.30-rc6-pae)
preparing boot-loader: selecting entry 0, kernel /boot/2.6.30-rc6-pae
grub-once: saving original /boot/grub/default
running '/usr/sbin/grubonce 0'
Using entry #0: openSUSE 11.1 - 2.6.30-rc6
time needed for sync: 0.0 seconds, time needed for grub: 0.0 seconds.
===== 2009-05-19 17:41:14.837061431 running hook: /usr/lib/pm-utils/sleep.d/99info =====
2009-05-19 17:41:14.840612580: done running hibernate/hibernate hooks.
+ /usr/sbin/s2disk --config /var/lib/s2disk.conf
+ RET=0
+ set +x
2009-05-19 18:36:28.616375442 +0200: running 'hibernate'/'thaw'/'reverse' hooks.
===== 2009-05-19 18:36:28.642346413 running hook: /usr/lib/pm-utils/sleep.d/99info =====
===== 2009-05-19 18:36:28.649111310 running hook: /usr/lib/pm-utils/sleep.d/99Zgrub =====
INFO: running grub-once-restore
restoring original /boot/grub/default
===== 2009-05-19 18:36:28.655889826 running hook: /usr/lib/pm-utils/sleep.d/98video =====
===== 2009-05-19 18:36:28.664100717 running hook: /usr/lib/pm-utils/sleep.d/95packagekit =====
method return sender=:1.426 -> dest=:1.425 reply_serial=2
===== 2009-05-19 18:36:29.323587290 running hook: /usr/lib/pm-utils/sleep.d/95led =====
===== 2009-05-19 18:36:29.327582141 running hook: /usr/lib/pm-utils/sleep.d/94cpufreq =====
===== 2009-05-19 18:36:29.341824106 running hook: /usr/lib/pm-utils/sleep.d/80videobios =====
===== 2009-05-19 18:36:29.357218591 running hook: /usr/lib/pm-utils/sleep.d/80acpi-fan =====
===== 2009-05-19 18:36:29.362773837 running hook: /usr/lib/pm-utils/sleep.d/50modules =====
===== 2009-05-19 18:36:29.374189325 running hook: /usr/lib/pm-utils/sleep.d/45pcmcia =====
inserting PCMCIA cards...
===== 2009-05-19 18:36:29.380685891 running hook: /usr/lib/pm-utils/sleep.d/30s2disk-check =====
===== 2009-05-19 18:36:29.386997029 running hook: /usr/lib/pm-utils/sleep.d/10NetworkManager =====
method return sender=:1.6 -> dest=:1.428 reply_serial=2
===== 2009-05-19 18:36:29.490646653 running hook: /usr/lib/pm-utils/sleep.d/06autofs =====
===== 2009-05-19 18:36:29.514802724 running hook: /usr/lib/pm-utils/sleep.d/05led =====
===== 2009-05-19 18:36:29.526302717 running hook: /usr/lib/pm-utils/sleep.d/02rtcwake =====
===== 2009-05-19 18:36:29.538773715 running hook: /usr/lib/pm-utils/sleep.d/01logging =====
===== 2009-05-19 18:36:29.549998534 running hook: /usr/lib/pm-utils/sleep.d/00clear =====
2009-05-19 18:36:29.572226566: done running hibernate/thaw hooks.
[-- Attachment #3: messages --]
[-- Type: text/plain, Size: 12711 bytes --]
May 19 17:41:13 linux-7vph pm-hibernate[19986]: Entering hibernate. In case of problems, please check /var/log/pm-suspend.log
May 19 17:41:14 linux-7vph avahi-daemon[2470]: Withdrawing address record for fe80::21c:25ff:fe95:93ec on eth0.
May 19 18:35:53 linux-7vph -- MARK --
May 19 18:35:53 linux-7vph kernel: Syncing filesystems ... done.
May 19 18:35:53 linux-7vph syslog-ng[2838]: Log statistics; dropped='pipe(/dev/xconsole)=0', dropped='pipe(/dev/tty10)=0', processed='center(queued)=3560', processed='center(received)=2835', processed='destination(newsnotice)=0', processed='destination(acpid)=10', processed='destination(firewall)=497', processed='destination(null)=239', processed='destination(mail)=6', processed='destination(mailinfo)=6', processed='destination(console)=235', processed='destination(newserr)=0', processed='destination(newscrit)=0', processed='destination(messages)=1391', processed='destination(mailwarn)=0', processed='destination(localmessages)=0', processed='destination(netmgm)=692', processed='destination(mailerr)=0', processed='destination(xconsole)=235', processed='destination(warn)=249', processed='source(src)=2835'
May 19 18:35:53 linux-7vph kernel: Freezing user space processes ... (elapsed 0.00 seconds) done.
May 19 18:35:53 linux-7vph kernel: Freezing remaining freezable tasks ... (elapsed 0.00 seconds) done.
May 19 18:35:53 linux-7vph kernel: PM: Shrinking memory... done (4220 pages freed)
May 19 18:35:53 linux-7vph kernel: PM: Freed 16880 kbytes in 0.24 seconds (70.33 MB/s)
May 19 18:35:53 linux-7vph kernel: Suspending console(s) (use no_console_suspend to debug)
May 19 18:35:53 linux-7vph kernel: sd 0:0:0:0: [sda] Synchronizing SCSI cache
May 19 18:35:53 linux-7vph kernel: ACPI handle has no context!
May 19 18:35:53 linux-7vph kernel: ehci_hcd 0000:00:1d.7: PCI INT D disabled
May 19 18:35:53 linux-7vph kernel: ehci_hcd 0000:00:1d.7: PME# disabled
May 19 18:35:53 linux-7vph kernel: uhci_hcd 0000:00:1d.2: PCI INT C disabled
May 19 18:35:53 linux-7vph kernel: uhci_hcd 0000:00:1d.1: PCI INT B disabled
May 19 18:35:53 linux-7vph kernel: uhci_hcd 0000:00:1d.0: PCI INT A disabled
May 19 18:35:53 linux-7vph kernel: HDA Intel 0000:00:1b.0: PCI INT B disabled
May 19 18:35:53 linux-7vph kernel: ehci_hcd 0000:00:1a.7: PCI INT D disabled
May 19 18:35:53 linux-7vph kernel: ehci_hcd 0000:00:1a.7: PME# disabled
May 19 18:35:53 linux-7vph kernel: uhci_hcd 0000:00:1a.2: PCI INT C disabled
May 19 18:35:53 linux-7vph kernel: uhci_hcd 0000:00:1a.1: PCI INT B disabled
May 19 18:35:53 linux-7vph kernel: uhci_hcd 0000:00:1a.0: PCI INT A disabled
May 19 18:35:53 linux-7vph kernel: e1000e 0000:00:19.0: PCI INT A disabled
May 19 18:35:53 linux-7vph kernel: e1000e 0000:00:19.0: PME# enabled
May 19 18:35:53 linux-7vph kernel: e1000e 0000:00:19.0: wake-up capability enabled by ACPI
May 19 18:35:53 linux-7vph kernel: ACPI: Preparing to enter system sleep state S4
May 19 18:35:53 linux-7vph kernel: PM: Saving platform NVS memory
May 19 18:35:53 linux-7vph kernel: Disabling non-boot CPUs ...
May 19 18:35:53 linux-7vph kernel: CPU 1 is now offline
May 19 18:35:53 linux-7vph kernel: SMP alternatives: switching to UP code
May 19 18:35:53 linux-7vph kernel: CPU0 attaching NULL sched-domain.
May 19 18:35:53 linux-7vph kernel: CPU1 attaching NULL sched-domain.
May 19 18:35:53 linux-7vph kernel: CPU0 attaching NULL sched-domain.
May 19 18:35:53 linux-7vph kernel: CPU1 is down
May 19 18:35:53 linux-7vph kernel: Extended CMOS year: 2000
May 19 18:35:53 linux-7vph kernel: PM: Creating hibernation image:
May 19 18:35:53 linux-7vph kernel: PM: Need to copy 225213 pages
May 19 18:35:53 linux-7vph kernel: x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
May 19 18:35:53 linux-7vph kernel: Intel machine check architecture supported.
May 19 18:35:53 linux-7vph kernel: Intel machine check reporting enabled on CPU#0.
May 19 18:35:53 linux-7vph kernel: PM: Restoring platform NVS memory
May 19 18:35:53 linux-7vph kernel: Extended CMOS year: 2000
May 19 18:35:53 linux-7vph kernel: Enabling non-boot CPUs ...
May 19 18:35:53 linux-7vph kernel: SMP alternatives: switching to SMP code
May 19 18:35:53 linux-7vph kernel: Booting processor 1 APIC 0x1 ip 0x6000
May 19 18:35:53 linux-7vph kernel: Initializing CPU#1
May 19 18:35:53 linux-7vph kernel: Calibrating delay using timer specific routine.. 13236.70 BogoMIPS (lpj=26473411)
May 19 18:35:53 linux-7vph kernel: CPU: L1 I cache: 32K, L1 D cache: 32K
May 19 18:35:53 linux-7vph kernel: CPU: L2 cache: 6144K
May 19 18:35:53 linux-7vph kernel: CPU: Physical Processor ID: 0
May 19 18:35:53 linux-7vph kernel: CPU: Processor Core ID: 1
May 19 18:35:53 linux-7vph kernel: Intel machine check architecture supported.
May 19 18:35:53 linux-7vph kernel: Intel machine check reporting enabled on CPU#1.
May 19 18:35:53 linux-7vph kernel: x86 PAT enabled: cpu 1, old 0x7040600070406, new 0x7010600070106
May 19 18:35:53 linux-7vph kernel: CPU1: Intel(R) Core(TM)2 Duo CPU T9400 @ 2.53GHz stepping 06
May 19 18:35:53 linux-7vph kernel: CPU0 attaching NULL sched-domain.
May 19 18:35:53 linux-7vph kernel: Switched to high resolution mode on CPU 1
May 19 18:35:53 linux-7vph kernel: CPU0 attaching sched-domain:
May 19 18:35:53 linux-7vph kernel: domain 0: span 0-1 level MC
May 19 18:35:53 linux-7vph kernel: groups: 0 1
May 19 18:35:53 linux-7vph kernel: CPU1 attaching sched-domain:
May 19 18:35:53 linux-7vph kernel: domain 0: span 0-1 level MC
May 19 18:35:53 linux-7vph kernel: groups: 1 0
May 19 18:35:53 linux-7vph kernel: microcode: failed to init CPU1
May 19 18:35:53 linux-7vph kernel: CPU1 is up
May 19 18:35:53 linux-7vph kernel: ACPI: Waking up from system sleep state S4
May 19 18:35:53 linux-7vph kernel: pci 0000:00:02.0: restoring config space at offset 0x1 (was 0x900007, writing 0x900403)
May 19 18:35:53 linux-7vph kernel: uhci_hcd 0000:00:1a.0: power state changed by ACPI to D0
May 19 18:35:53 linux-7vph kernel: uhci_hcd 0000:00:1a.2: power state changed by ACPI to D0
May 19 18:35:53 linux-7vph kernel: HDA Intel 0000:00:1b.0: restoring config space at offset 0x1 (was 0x100106, writing 0x100102)
May 19 18:35:53 linux-7vph kernel: uhci_hcd 0000:00:1d.0: power state changed by ACPI to D0
May 19 18:35:53 linux-7vph kernel: ahci 0000:00:1f.2: restoring config space at offset 0x1 (was 0x2b00403, writing 0x2b00407)
May 19 18:35:53 linux-7vph kernel: pci 0000:03:00.0: restoring config space at offset 0x1 (was 0x100106, writing 0x100102)
May 19 18:35:53 linux-7vph kernel: pci 0000:00:02.0: PME# disabled
May 19 18:35:53 linux-7vph kernel: pci 0000:00:02.0: setting latency timer to 64
May 19 18:35:53 linux-7vph kernel: pci 0000:00:02.1: PME# disabled
May 19 18:35:53 linux-7vph kernel: pci 0000:00:03.0: PME# disabled
May 19 18:35:53 linux-7vph kernel: e1000e 0000:00:19.0: PCI INT A -> GSI 20 (level, low) -> IRQ 20
May 19 18:35:53 linux-7vph kernel: e1000e 0000:00:19.0: pci_enable_pcie_error_reporting failed 0xfffffffb
May 19 18:35:53 linux-7vph kernel: e1000e 0000:00:19.0: setting latency timer to 64
May 19 18:35:53 linux-7vph kernel: e1000e 0000:00:19.0: wake-up capability disabled by ACPI
May 19 18:35:53 linux-7vph kernel: e1000e 0000:00:19.0: PME# disabled
May 19 18:35:53 linux-7vph kernel: e1000e 0000:00:19.0: wake-up capability disabled by ACPI
May 19 18:35:53 linux-7vph kernel: e1000e 0000:00:19.0: PME# disabled
May 19 18:35:53 linux-7vph kernel: e1000e 0000:00:19.0: irq 29 for MSI/MSI-X
May 19 18:35:53 linux-7vph kernel: uhci_hcd 0000:00:1a.0: PCI INT A -> GSI 20 (level, low) -> IRQ 20
May 19 18:35:53 linux-7vph kernel: uhci_hcd 0000:00:1a.0: setting latency timer to 64
May 19 18:35:53 linux-7vph kernel: uhci_hcd 0000:00:1a.1: PCI INT B -> GSI 21 (level, low) -> IRQ 21
May 19 18:35:53 linux-7vph kernel: uhci_hcd 0000:00:1a.1: setting latency timer to 64
May 19 18:35:53 linux-7vph kernel: uhci_hcd 0000:00:1a.2: PCI INT C -> GSI 22 (level, low) -> IRQ 22
May 19 18:35:53 linux-7vph kernel: uhci_hcd 0000:00:1a.2: setting latency timer to 64
May 19 18:35:53 linux-7vph kernel: ehci_hcd 0000:00:1a.7: PME# disabled
May 19 18:35:53 linux-7vph kernel: ehci_hcd 0000:00:1a.7: PCI INT D -> GSI 23 (level, low) -> IRQ 23
May 19 18:35:53 linux-7vph kernel: ehci_hcd 0000:00:1a.7: setting latency timer to 64
May 19 18:35:53 linux-7vph kernel: ehci_hcd 0000:00:1a.7: PME# disabled
May 19 18:35:53 linux-7vph kernel: HDA Intel 0000:00:1b.0: PCI INT B -> GSI 17 (level, low) -> IRQ 17
May 19 18:35:53 linux-7vph kernel: HDA Intel 0000:00:1b.0: setting latency timer to 64
May 19 18:35:53 linux-7vph kernel: uhci_hcd 0000:00:1d.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
May 19 18:35:53 linux-7vph kernel: uhci_hcd 0000:00:1d.0: setting latency timer to 64
May 19 18:35:53 linux-7vph kernel: uhci_hcd 0000:00:1d.1: PCI INT B -> GSI 17 (level, low) -> IRQ 17
May 19 18:35:53 linux-7vph kernel: uhci_hcd 0000:00:1d.1: setting latency timer to 64
May 19 18:35:53 linux-7vph kernel: uhci_hcd 0000:00:1d.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18
May 19 18:35:53 linux-7vph kernel: uhci_hcd 0000:00:1d.2: setting latency timer to 64
May 19 18:35:53 linux-7vph kernel: ehci_hcd 0000:00:1d.7: PME# disabled
May 19 18:35:53 linux-7vph kernel: ehci_hcd 0000:00:1d.7: PCI INT D -> GSI 19 (level, low) -> IRQ 19
May 19 18:35:53 linux-7vph kernel: ehci_hcd 0000:00:1d.7: setting latency timer to 64
May 19 18:35:53 linux-7vph kernel: ehci_hcd 0000:00:1d.7: PME# disabled
May 19 18:35:53 linux-7vph kernel: pci 0000:00:1e.0: setting latency timer to 64
May 19 18:35:53 linux-7vph kernel: ahci 0000:00:1f.2: setting latency timer to 64
May 19 18:35:53 linux-7vph kernel: pci 0000:03:00.0: PME# disabled
May 19 18:35:53 linux-7vph kernel: pci 0000:15:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
May 19 18:35:53 linux-7vph kernel: ohci1394: fw-host0: OHCI-1394 1.1 (PCI): IRQ=[17] MMIO=[f4801000-f48017ff] Max Packet=[2048] IR/IT contexts=[4/4]
May 19 18:35:53 linux-7vph kernel: pci 0000:15:00.2: PME# disabled
May 19 18:35:53 linux-7vph kernel: pci 0000:15:00.3: PME# disabled
May 19 18:35:53 linux-7vph kernel: pci 0000:15:00.4: PME# disabled
May 19 18:35:53 linux-7vph kernel: pci 0000:15:00.5: PME# disabled
May 19 18:35:53 linux-7vph kernel: sd 0:0:0:0: [sda] Starting disk
May 19 18:35:53 linux-7vph kernel: ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
May 19 18:35:53 linux-7vph kernel: ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
May 19 18:35:53 linux-7vph kernel: ata1.00: ACPI cmd ef/02:00:00:00:00:a0 succeeded
May 19 18:35:53 linux-7vph kernel: ata1.00: ACPI cmd f5/00:00:00:00:00:a0 filtered out
May 19 18:35:53 linux-7vph kernel: ata1.00: ACPI cmd ef/5f:00:00:00:00:a0 succeeded
May 19 18:35:53 linux-7vph kernel: ata1.00: ACPI cmd ef/10:03:00:00:00:a0 filtered out
May 19 18:35:53 linux-7vph kernel: ata1.00: ACPI cmd ef/02:00:00:00:00:a0 succeeded
May 19 18:35:53 linux-7vph kernel: ata1.00: ACPI cmd f5/00:00:00:00:00:a0 filtered out
May 19 18:35:53 linux-7vph kernel: ata1.00: ACPI cmd ef/5f:00:00:00:00:a0 succeeded
May 19 18:35:53 linux-7vph kernel: ata1.00: ACPI cmd ef/10:03:00:00:00:a0 filtered out
May 19 18:35:53 linux-7vph kernel: ata1.00: configured for UDMA/133
May 19 18:35:53 linux-7vph kernel: ata2.00: ACPI cmd e3/00:1f:00:00:00:a0 succeeded
May 19 18:35:53 linux-7vph kernel: ata2.00: ACPI cmd e3/00:02:00:00:00:a0 succeeded
May 19 18:35:53 linux-7vph kernel: ata2.00: ACPI cmd e3/00:1f:00:00:00:a0 succeeded
May 19 18:35:53 linux-7vph kernel: ata2.00: ACPI cmd e3/00:02:00:00:00:a0 succeeded
May 19 18:35:53 linux-7vph kernel: ata1: exception Emask 0x10 SAct 0x0 SErr 0x0 action 0x9 t4
May 19 18:35:53 linux-7vph kernel: ata1: irq_stat 0x00400040, connection status changed
May 19 18:35:53 linux-7vph kernel: ata1.00: configured for UDMA/133
May 19 18:35:53 linux-7vph kernel: ata1: EH complete
May 19 18:35:53 linux-7vph kernel: ata2.00: configured for UDMA/133
May 19 18:35:53 linux-7vph kernel: ata2: exception Emask 0x10 SAct 0x0 SErr 0x0 action 0x9 t4
May 19 18:35:53 linux-7vph kernel: ata2: irq_stat 0x40000001
May 19 18:35:53 linux-7vph kernel: ata2.00: configured for UDMA/133
May 19 18:35:53 linux-7vph kernel: ata2: EH complete
May 19 18:35:53 linux-7vph kernel: pci 0000:00:02.0: restoring config space at offset 0x1 (was 0x900407, writing 0x900403)
May 19 18:35:53 linux-7vph kernel: pci 0000:00:02.0: setting latency timer to 64
May 19 18:35:53 linux-7vph kernel: Restarting tasks ... done.
May 19 18:36:29 linux-7vph kernel: e1000e 0000:00:19.0: irq 29 for MSI/MSI-X
May 19 18:36:29 linux-7vph kernel: e1000e 0000:00:19.0: irq 29 for MSI/MSI-X
May 19 18:36:29 linux-7vph kernel: ADDRCONF(NETDEV_UP): eth0: link is not ready
May 19 18:36:40 linux-7vph init: Switching to runlevel: 5
^ permalink raw reply [flat|nested] 9+ messages in thread* Re: BUG: blank screen - unless keyboard/synaptic combo 2009-05-19 18:38 BUG: blank screen - unless keyboard/synaptic combo Niel Lambrechts @ 2009-05-21 22:40 ` Niel Lambrechts 2009-05-21 22:58 ` Niel Lambrechts 1 sibling, 0 replies; 9+ messages in thread From: Niel Lambrechts @ 2009-05-21 22:40 UTC (permalink / raw) To: linux-kernel On 05/19/2009 08:38 PM, Niel Lambrechts wrote: > I have a strange problem in that during a resume from hibernate my > text console (or X) remains blank - that is, until I simultaneously > press a keyboard key and touch the synaptic pad. It is not sufficient > to press just one or the other, it needs to be done simultaneously and > it resumes fine after doing this. I have tried quite hard to overcome this issue. All of the following hibernation tests I tried involved booting into a text console, without ever starting X. With each test I still had a blank screen upon resume, and each time it was fully recoverable by pressing any keyboard key/synaptic pad touch combo. 1. Disabling a CPU core - NO CHANGE. Based on a "multi-processor concurrency" fix mentioned on the web (Ubuntu bug #272307). 2. Upgrade BIOS to latest level - NO CHANGE. BIOS 6FET70WW, released 04/17/2009. 3. Switching to ATI Mobility Radeon HD 3650 graphics card. NO CHANGE. My Lenovo W500 has "switchable graphics" BIOS option, and I tried this test with both the integrated or the above-mentioned card without difference. _This result seems quite interesting to me, as if it could be some type of bus related freeze where the keyboard/synaptic combo plays a role._ 4. Disabling BIOS Options - NO CHANGE. Enabling/disabling security chip features + TXT features. Disabling fingerprint reader. Disabling memory security feature. 5. Kernel options - NO CHANGE. ACPI debugging - I enabled CONFIG_ACPI_DEBUG, but did not see any messages generated when I pressed a keyboard key + synaptic mousepad combo that recovers the console. FIRMWARE_EDID - still testing this. Any suggestions on anything else I could try would be most welcome...! Thanks, Niel ^ permalink raw reply [flat|nested] 9+ messages in thread
* Re: BUG: blank screen - unless keyboard/synaptic combo 2009-05-19 18:38 BUG: blank screen - unless keyboard/synaptic combo Niel Lambrechts 2009-05-21 22:40 ` Niel Lambrechts @ 2009-05-21 22:58 ` Niel Lambrechts 2009-05-22 3:39 ` Zhang Rui 1 sibling, 1 reply; 9+ messages in thread From: Niel Lambrechts @ 2009-05-21 22:58 UTC (permalink / raw) To: linux-pci@vger.kernel.org, linux-acpi@vger.kernel.org [-- Attachment #1: Type: text/plain, Size: 1776 bytes --] Cc's added, attached lspci output. On 05/19/2009 08:38 PM, Niel Lambrechts wrote: > I have a strange problem in that during a resume from hibernate my > text console (or X) remains blank - that is, until I simultaneously > press a keyboard key and touch the synaptic pad. It is not sufficient > to press just one or the other, it needs to be done simultaneously and > it resumes fine after doing this. I have tried quite hard to overcome this issue. All of the following hibernation tests I tried involved booting into a text console, without ever starting X. With each test I still had a blank screen upon resume, and each time it was fully recoverable by pressing any keyboard key/synaptic pad touch combo. 1. Disabling a CPU core - NO CHANGE. Based on a "multi-processor concurrency" fix mentioned on the web (Ubuntu bug #272307). 2. Upgrade BIOS to latest level - NO CHANGE. BIOS 6FET70WW, released 04/17/2009. 3. Switching to ATI Mobility Radeon HD 3650 graphics card. NO CHANGE. My Lenovo W500 has "switchable graphics" BIOS option, and I tried this test with both the integrated or the above-mentioned card without difference. _This result seems quite interesting to me, as if it could be some type of bus related freeze where the keyboard/synaptic combo plays a role._ 4. Disabling BIOS Options - NO CHANGE. Enabling/disabling security chip features + TXT features. Disabling fingerprint reader. Disabling memory security feature. 5. Kernel options - NO CHANGE. ACPI debugging - I enabled CONFIG_ACPI_DEBUG, but did not see any messages generated when I pressed a keyboard key + synaptic mousepad combo that recovers the console. FIRMWARE_EDID - still testing this. Any suggestions on anything else I could try would be most welcome...! Thanks, Niel [-- Attachment #2: lspci-vvv.txt --] [-- Type: text/plain, Size: 54331 bytes --] linux-7vph:~ # lspci -vvv 00:00.0 Host bridge: Intel Corporation Mobile 4 Series Chipset Memory Controller Hub (rev 07) Subsystem: Lenovo Device 20e0 Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort+ >SERR- <PERR- INTx- Latency: 0 Capabilities: [e0] Vendor Specific Information <?> Kernel driver in use: agpgart-intel Kernel modules: intel-agp 00:02.0 VGA compatible controller: Intel Corporation Mobile 4 Series Chipset Integrated Graphics Controller (rev 07) (prog-if 00 [VGA controller]) Subsystem: Lenovo Device 2114 Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+ Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 Interrupt: pin A routed to IRQ 31 Region 0: Memory at f4400000 (64-bit, non-prefetchable) [size=4M] Region 2: Memory at d0000000 (64-bit, prefetchable) [size=256M] Region 4: I/O ports at 1800 [size=8] Capabilities: [90] Message Signalled Interrupts: Mask- 64bit- Count=1/1 Enable+ Address: fee0300c Data: 41e9 Capabilities: [d0] Power Management version 3 Flags: PMEClk- DSI+ D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-) Status: D0 PME-Enable- DSel=0 DScale=0 PME- 00:02.1 Display controller: Intel Corporation Mobile 4 Series Chipset Integrated Graphics Controller (rev 07) Subsystem: Lenovo Device 2114 Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 Region 0: Memory at f4200000 (64-bit, non-prefetchable) [size=1M] Capabilities: [d0] Power Management version 3 Flags: PMEClk- DSI+ D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-) Status: D0 PME-Enable- DSel=0 DScale=0 PME- 00:03.0 Communication controller: Intel Corporation Mobile 4 Series Chipset MEI Controller (rev 07) Subsystem: Lenovo Device 20e6 Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx+ Latency: 0 Interrupt: pin A routed to IRQ 11 Region 0: Memory at fc226800 (64-bit, non-prefetchable) [size=16] Capabilities: [50] Power Management version 3 Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0+,D1-,D2-,D3hot+,D3cold+) Status: D0 PME-Enable- DSel=0 DScale=0 PME- Capabilities: [8c] Message Signalled Interrupts: Mask- 64bit+ Count=1/1 Enable- Address: 0000000000000000 Data: 0000 00:19.0 Ethernet controller: Intel Corporation 82567LM Gigabit Network Connection (rev 03) Subsystem: Lenovo Device 20ee Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx+ Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 Interrupt: pin A routed to IRQ 29 Region 0: Memory at fc000000 (32-bit, non-prefetchable) [size=128K] Region 1: Memory at fc025000 (32-bit, non-prefetchable) [size=4K] Region 2: I/O ports at 1840 [size=32] Capabilities: [c8] Power Management version 2 Flags: PMEClk- DSI+ D1- D2- AuxCurrent=0mA PME(D0+,D1-,D2-,D3hot+,D3cold+) Status: D0 PME-Enable- DSel=0 DScale=1 PME- Capabilities: [d0] Message Signalled Interrupts: Mask- 64bit+ Count=1/1 Enable+ Address: 00000000fee0300c Data: 41e1 Capabilities: [e0] PCIe advanced features <?> Kernel driver in use: e1000e Kernel modules: e1000e 00:1a.0 USB Controller: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #4 (rev 03) (prog-if 00 [UHCI]) Subsystem: Lenovo Device 20f0 Control: I/O+ Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Interrupt: pin A routed to IRQ 20 Region 4: I/O ports at 1860 [size=32] Capabilities: [50] PCIe advanced features <?> Kernel modules: uhci-hcd 00:1a.1 USB Controller: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #5 (rev 03) (prog-if 00 [UHCI]) Subsystem: Lenovo Device 20f0 Control: I/O+ Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Interrupt: pin B routed to IRQ 21 Region 4: I/O ports at 1880 [size=32] Capabilities: [50] PCIe advanced features <?> Kernel modules: uhci-hcd 00:1a.2 USB Controller: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #6 (rev 03) (prog-if 00 [UHCI]) Subsystem: Lenovo Device 20f0 Control: I/O+ Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Interrupt: pin C routed to IRQ 22 Region 4: I/O ports at 18a0 [size=32] Capabilities: [50] PCIe advanced features <?> Kernel modules: uhci-hcd 00:1a.7 USB Controller: Intel Corporation 82801I (ICH9 Family) USB2 EHCI Controller #2 (rev 03) (prog-if 20 [EHCI]) Subsystem: Lenovo Device 20f1 Control: I/O- Mem+ BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Interrupt: pin D routed to IRQ 23 Region 0: Memory at fc226c00 (32-bit, non-prefetchable) [size=1K] Capabilities: [50] Power Management version 2 Flags: PMEClk- DSI- D1- D2- AuxCurrent=375mA PME(D0+,D1-,D2-,D3hot+,D3cold+) Status: D0 PME-Enable- DSel=0 DScale=0 PME- Capabilities: [58] Debug port: BAR=1 offset=00a0 Capabilities: [98] PCIe advanced features <?> Kernel modules: ehci-hcd 00:1b.0 Audio device: Intel Corporation 82801I (ICH9 Family) HD Audio Controller (rev 03) Subsystem: Lenovo Device 20f2 Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0, Cache Line Size: 64 bytes Interrupt: pin B routed to IRQ 17 Region 0: Memory at fc020000 (64-bit, non-prefetchable) [size=16K] Capabilities: [50] Power Management version 2 Flags: PMEClk- DSI- D1- D2- AuxCurrent=55mA PME(D0+,D1-,D2-,D3hot+,D3cold+) Status: D0 PME-Enable- DSel=0 DScale=0 PME- Capabilities: [60] Message Signalled Interrupts: Mask- 64bit+ Count=1/1 Enable- Address: 0000000000000000 Data: 0000 Capabilities: [70] Express (v1) Root Complex Integrated Endpoint, MSI 00 DevCap: MaxPayload 128 bytes, PhantFunc 0, Latency L0s <64ns, L1 <1us ExtTag- RBE- FLReset+ DevCtl: Report errors: Correctable- Non-Fatal- Fatal- Unsupported- RlxdOrd- ExtTag- PhantFunc- AuxPwr- NoSnoop+ MaxPayload 128 bytes, MaxReadReq 128 bytes DevSta: CorrErr- UncorrErr- FatalErr- UnsuppReq- AuxPwr+ TransPend- LnkCap: Port #0, Speed unknown, Width x0, ASPM unknown, Latency L0 <64ns, L1 <1us ClockPM- Suprise- LLActRep- BwNot- LnkCtl: ASPM Disabled; Disabled- Retrain- CommClk- ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt- LnkSta: Speed unknown, Width x0, TrErr- Train- SlotClk- DLActive- BWMgmt- ABWMgmt- Capabilities: [100] Virtual Channel <?> Capabilities: [130] Root Complex Link <?> Kernel driver in use: HDA Intel Kernel modules: snd-hda-intel 00:1c.0 PCI bridge: Intel Corporation 82801I (ICH9 Family) PCI Express Port 1 (rev 03) (prog-if 00 [Normal decode]) Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx+ Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0, Cache Line Size: 64 bytes Bus: primary=00, secondary=02, subordinate=02, sec-latency=0 I/O behind bridge: 0000f000-00000fff Memory behind bridge: fff00000-000fffff Prefetchable memory behind bridge: 00000000fff00000-00000000000fffff Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort+ <SERR- <PERR- BridgeCtl: Parity- SERR- NoISA+ VGA- MAbort- >Reset- FastB2B- PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn- Capabilities: [40] Express (v1) Root Port (Slot+), MSI 00 DevCap: MaxPayload 128 bytes, PhantFunc 0, Latency L0s <64ns, L1 <1us ExtTag- RBE+ FLReset- DevCtl: Report errors: Correctable- Non-Fatal- Fatal- Unsupported- RlxdOrd- ExtTag- PhantFunc- AuxPwr- NoSnoop- MaxPayload 128 bytes, MaxReadReq 128 bytes DevSta: CorrErr- UncorrErr- FatalErr- UnsuppReq- AuxPwr+ TransPend- LnkCap: Port #1, Speed 2.5GT/s, Width x1, ASPM L0s L1, Latency L0 <1us, L1 <4us ClockPM- Suprise- LLActRep+ BwNot- LnkCtl: ASPM Disabled; RCB 64 bytes Disabled- Retrain- CommClk- ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt- LnkSta: Speed 2.5GT/s, Width x0, TrErr- Train- SlotClk+ DLActive- BWMgmt- ABWMgmt- SltCap: AttnBtn- PwrCtrl- MRL- AttnInd- PwrInd- HotPlug+ Surpise+ Slot # 0, PowerLimit 6.500000; Interlock- NoCompl- SltCtl: Enable: AttnBtn- PwrFlt- MRL- PresDet- CmdCplt- HPIrq- LinkChg- Control: AttnInd Unknown, PwrInd Unknown, Power- Interlock- SltSta: Status: AttnBtn- PowerFlt- MRL- CmdCplt- PresDet- Interlock- Changed: MRL- PresDet- LinkState- RootCtl: ErrCorrectable- ErrNon-Fatal- ErrFatal- PMEIntEna- CRSVisible- RootCap: CRSVisible- RootSta: PME ReqID 0000, PMEStatus- PMEPending- Capabilities: [80] Message Signalled Interrupts: Mask- 64bit- Count=1/1 Enable+ Address: fee0100c Data: 4169 Capabilities: [90] Subsystem: Lenovo Device 20f3 Capabilities: [a0] Power Management version 2 Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0+,D1-,D2-,D3hot+,D3cold+) Status: D0 PME-Enable- DSel=0 DScale=0 PME- Capabilities: [100] Virtual Channel <?> Capabilities: [180] Root Complex Link <?> Kernel driver in use: pcieport-driver Kernel modules: shpchp 00:1c.1 PCI bridge: Intel Corporation 82801I (ICH9 Family) PCI Express Port 2 (rev 03) (prog-if 00 [Normal decode]) Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx+ Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0, Cache Line Size: 64 bytes Bus: primary=00, secondary=03, subordinate=03, sec-latency=0 I/O behind bridge: 0000f000-00000fff Memory behind bridge: f4300000-f43fffff Prefetchable memory behind bridge: 00000000fff00000-00000000000fffff Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort+ <SERR- <PERR- BridgeCtl: Parity- SERR- NoISA+ VGA- MAbort- >Reset- FastB2B- PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn- Capabilities: [40] Express (v1) Root Port (Slot+), MSI 00 DevCap: MaxPayload 128 bytes, PhantFunc 0, Latency L0s <64ns, L1 <1us ExtTag- RBE+ FLReset- DevCtl: Report errors: Correctable- Non-Fatal- Fatal- Unsupported- RlxdOrd- ExtTag- PhantFunc- AuxPwr- NoSnoop- MaxPayload 128 bytes, MaxReadReq 128 bytes DevSta: CorrErr+ UncorrErr- FatalErr- UnsuppReq- AuxPwr+ TransPend- LnkCap: Port #2, Speed 2.5GT/s, Width x1, ASPM L0s L1, Latency L0 <256ns, L1 <4us ClockPM- Suprise- LLActRep+ BwNot- LnkCtl: ASPM L1 Enabled; RCB 64 bytes Disabled- Retrain- CommClk+ ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt- LnkSta: Speed 2.5GT/s, Width x1, TrErr- Train- SlotClk+ DLActive+ BWMgmt- ABWMgmt- SltCap: AttnBtn- PwrCtrl- MRL- AttnInd- PwrInd- HotPlug+ Surpise+ Slot # 1, PowerLimit 6.500000; Interlock- NoCompl- SltCtl: Enable: AttnBtn- PwrFlt- MRL- PresDet- CmdCplt- HPIrq- LinkChg- Control: AttnInd Unknown, PwrInd Unknown, Power- Interlock- SltSta: Status: AttnBtn- PowerFlt- MRL- CmdCplt- PresDet+ Interlock- Changed: MRL- PresDet+ LinkState+ RootCtl: ErrCorrectable- ErrNon-Fatal- ErrFatal- PMEIntEna- CRSVisible- RootCap: CRSVisible- RootSta: PME ReqID 0000, PMEStatus- PMEPending- Capabilities: [80] Message Signalled Interrupts: Mask- 64bit- Count=1/1 Enable+ Address: fee0100c Data: 4171 Capabilities: [90] Subsystem: Lenovo Device 20f3 Capabilities: [a0] Power Management version 2 Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0+,D1-,D2-,D3hot+,D3cold+) Status: D0 PME-Enable- DSel=0 DScale=0 PME- Capabilities: [100] Virtual Channel <?> Capabilities: [180] Root Complex Link <?> Kernel driver in use: pcieport-driver Kernel modules: shpchp 00:1c.3 PCI bridge: Intel Corporation 82801I (ICH9 Family) PCI Express Port 4 (rev 03) (prog-if 00 [Normal decode]) Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx+ Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0, Cache Line Size: 64 bytes Bus: primary=00, secondary=05, subordinate=0c, sec-latency=0 I/O behind bridge: 00002000-00002fff Memory behind bridge: f8000000-f9ffffff Prefetchable memory behind bridge: 00000000f4000000-00000000f40fffff Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR- BridgeCtl: Parity- SERR- NoISA+ VGA- MAbort- >Reset- FastB2B- PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn- Capabilities: [40] Express (v1) Root Port (Slot+), MSI 00 DevCap: MaxPayload 128 bytes, PhantFunc 0, Latency L0s <64ns, L1 <1us ExtTag- RBE+ FLReset- DevCtl: Report errors: Correctable- Non-Fatal- Fatal- Unsupported- RlxdOrd- ExtTag- PhantFunc- AuxPwr- NoSnoop- MaxPayload 128 bytes, MaxReadReq 128 bytes DevSta: CorrErr- UncorrErr- FatalErr- UnsuppReq- AuxPwr+ TransPend- LnkCap: Port #4, Speed 2.5GT/s, Width x1, ASPM L0s L1, Latency L0 <1us, L1 <4us ClockPM- Suprise- LLActRep+ BwNot- LnkCtl: ASPM L0s L1 Enabled; RCB 64 bytes Disabled- Retrain- CommClk- ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt- LnkSta: Speed 2.5GT/s, Width x0, TrErr- Train- SlotClk+ DLActive- BWMgmt- ABWMgmt- SltCap: AttnBtn- PwrCtrl- MRL- AttnInd- PwrInd- HotPlug+ Surpise+ Slot # 3, PowerLimit 6.500000; Interlock- NoCompl- SltCtl: Enable: AttnBtn- PwrFlt- MRL- PresDet+ CmdCplt- HPIrq+ LinkChg- Control: AttnInd Unknown, PwrInd Unknown, Power- Interlock- SltSta: Status: AttnBtn- PowerFlt- MRL- CmdCplt- PresDet- Interlock- Changed: MRL- PresDet- LinkState- RootCtl: ErrCorrectable- ErrNon-Fatal- ErrFatal- PMEIntEna- CRSVisible- RootCap: CRSVisible- RootSta: PME ReqID 0000, PMEStatus- PMEPending- Capabilities: [80] Message Signalled Interrupts: Mask- 64bit- Count=1/1 Enable+ Address: fee0100c Data: 4179 Capabilities: [90] Subsystem: Lenovo Device 20f3 Capabilities: [a0] Power Management version 2 Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0+,D1-,D2-,D3hot+,D3cold+) Status: D0 PME-Enable- DSel=0 DScale=0 PME- Capabilities: [100] Virtual Channel <?> Capabilities: [180] Root Complex Link <?> Kernel driver in use: pcieport-driver Kernel modules: shpchp 00:1c.4 PCI bridge: Intel Corporation 82801I (ICH9 Family) PCI Express Port 5 (rev 03) (prog-if 00 [Normal decode]) Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx+ Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0, Cache Line Size: 64 bytes Bus: primary=00, secondary=0d, subordinate=14, sec-latency=0 I/O behind bridge: 00003000-00003fff Memory behind bridge: fa000000-fbffffff Prefetchable memory behind bridge: 00000000f4100000-00000000f41fffff Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR- BridgeCtl: Parity- SERR- NoISA+ VGA- MAbort- >Reset- FastB2B- PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn- Capabilities: [40] Express (v1) Root Port (Slot+), MSI 00 DevCap: MaxPayload 128 bytes, PhantFunc 0, Latency L0s <64ns, L1 <1us ExtTag- RBE+ FLReset- DevCtl: Report errors: Correctable- Non-Fatal- Fatal- Unsupported- RlxdOrd- ExtTag- PhantFunc- AuxPwr- NoSnoop- MaxPayload 128 bytes, MaxReadReq 128 bytes DevSta: CorrErr- UncorrErr- FatalErr- UnsuppReq- AuxPwr+ TransPend- LnkCap: Port #5, Speed 2.5GT/s, Width x1, ASPM L0s L1, Latency L0 <1us, L1 <4us ClockPM- Suprise- LLActRep+ BwNot- LnkCtl: ASPM L0s L1 Enabled; RCB 64 bytes Disabled- Retrain- CommClk- ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt- LnkSta: Speed 2.5GT/s, Width x0, TrErr- Train- SlotClk+ DLActive- BWMgmt- ABWMgmt- SltCap: AttnBtn- PwrCtrl- MRL- AttnInd- PwrInd- HotPlug+ Surpise+ Slot # 4, PowerLimit 6.500000; Interlock- NoCompl- SltCtl: Enable: AttnBtn- PwrFlt- MRL- PresDet+ CmdCplt- HPIrq+ LinkChg- Control: AttnInd Unknown, PwrInd Unknown, Power- Interlock- SltSta: Status: AttnBtn- PowerFlt- MRL- CmdCplt- PresDet- Interlock- Changed: MRL- PresDet- LinkState- RootCtl: ErrCorrectable- ErrNon-Fatal- ErrFatal- PMEIntEna- CRSVisible- RootCap: CRSVisible- RootSta: PME ReqID 0000, PMEStatus- PMEPending- Capabilities: [80] Message Signalled Interrupts: Mask- 64bit- Count=1/1 Enable+ Address: fee0100c Data: 4181 Capabilities: [90] Subsystem: Lenovo Device 20f3 Capabilities: [a0] Power Management version 2 Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0+,D1-,D2-,D3hot+,D3cold+) Status: D0 PME-Enable- DSel=0 DScale=0 PME- Capabilities: [100] Virtual Channel <?> Capabilities: [180] Root Complex Link <?> Kernel driver in use: pcieport-driver Kernel modules: shpchp 00:1d.0 USB Controller: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #1 (rev 03) (prog-if 00 [UHCI]) Subsystem: Lenovo Device 20f0 Control: I/O+ Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Interrupt: pin A routed to IRQ 16 Region 4: I/O ports at 18c0 [size=32] Capabilities: [50] PCIe advanced features <?> Kernel modules: uhci-hcd 00:1d.1 USB Controller: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #2 (rev 03) (prog-if 00 [UHCI]) Subsystem: Lenovo Device 20f0 Control: I/O+ Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Interrupt: pin B routed to IRQ 17 Region 4: I/O ports at 18e0 [size=32] Capabilities: [50] PCIe advanced features <?> Kernel modules: uhci-hcd 00:1d.2 USB Controller: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #3 (rev 03) (prog-if 00 [UHCI]) Subsystem: Lenovo Device 20f0 Control: I/O+ Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Interrupt: pin C routed to IRQ 18 Region 4: I/O ports at 1c00 [size=32] Capabilities: [50] PCIe advanced features <?> Kernel modules: uhci-hcd 00:1d.7 USB Controller: Intel Corporation 82801I (ICH9 Family) USB2 EHCI Controller #1 (rev 03) (prog-if 20 [EHCI]) Subsystem: Lenovo Device 20f1 Control: I/O- Mem+ BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Interrupt: pin D routed to IRQ 19 Region 0: Memory at fc227000 (32-bit, non-prefetchable) [size=1K] Capabilities: [50] Power Management version 2 Flags: PMEClk- DSI- D1- D2- AuxCurrent=375mA PME(D0+,D1-,D2-,D3hot+,D3cold+) Status: D0 PME-Enable- DSel=0 DScale=0 PME- Capabilities: [58] Debug port: BAR=1 offset=00a0 Capabilities: [98] PCIe advanced features <?> Kernel modules: ehci-hcd 00:1e.0 PCI bridge: Intel Corporation 82801 Mobile PCI Bridge (rev 93) (prog-if 01 [Subtractive decode]) Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 Bus: primary=00, secondary=15, subordinate=18, sec-latency=32 I/O behind bridge: 00004000-00007fff Memory behind bridge: f4800000-f7ffffff Prefetchable memory behind bridge: 00000000f0000000-00000000f3ffffff Secondary status: 66MHz- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort+ <SERR- <PERR- BridgeCtl: Parity- SERR- NoISA+ VGA- MAbort- >Reset- FastB2B- PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn- Capabilities: [50] Subsystem: Lenovo Device 20f4 00:1f.0 ISA bridge: Intel Corporation ICH9M-E LPC Interface Controller (rev 03) Subsystem: Lenovo Device 20f5 Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 Capabilities: [e0] Vendor Specific Information <?> Kernel modules: iTCO_wdt 00:1f.2 SATA controller: Intel Corporation ICH9M/M-E SATA AHCI Controller (rev 03) (prog-if 01 [AHCI 1.0]) Subsystem: Lenovo Device 20f8 Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+ Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 Interrupt: pin B routed to IRQ 28 Region 0: I/O ports at 1c48 [size=8] Region 1: I/O ports at 183c [size=4] Region 2: I/O ports at 1c40 [size=8] Region 3: I/O ports at 1838 [size=4] Region 4: I/O ports at 1c20 [size=32] Region 5: Memory at fc226000 (32-bit, non-prefetchable) [size=2K] Capabilities: [80] Message Signalled Interrupts: Mask- 64bit- Count=1/16 Enable+ Address: fee0100c Data: 4189 Capabilities: [70] Power Management version 3 Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot+,D3cold-) Status: D0 PME-Enable- DSel=0 DScale=0 PME- Capabilities: [a8] SATA HBA <?> Capabilities: [b0] PCIe advanced features <?> Kernel driver in use: ahci Kernel modules: ahci 00:1f.3 SMBus: Intel Corporation 82801I (ICH9 Family) SMBus Controller (rev 03) Subsystem: Lenovo Device 20f9 Control: I/O+ Mem+ BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx- Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Interrupt: pin A routed to IRQ 23 Region 0: Memory at fc227400 (64-bit, non-prefetchable) [size=256] Region 4: I/O ports at 1c60 [size=32] Kernel driver in use: i801_smbus Kernel modules: i2c-i801 03:00.0 Network controller: Intel Corporation Wireless WiFi Link 5100 Subsystem: Intel Corporation Device 1011 Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx+ Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0, Cache Line Size: 64 bytes Interrupt: pin A routed to IRQ 30 Region 0: Memory at f4300000 (64-bit, non-prefetchable) [size=8K] Capabilities: [c8] Power Management version 3 Flags: PMEClk- DSI+ D1- D2- AuxCurrent=0mA PME(D0+,D1-,D2-,D3hot+,D3cold+) Status: D0 PME-Enable- DSel=0 DScale=0 PME- Capabilities: [d0] Message Signalled Interrupts: Mask- 64bit+ Count=1/1 Enable+ Address: 00000000fee0100c Data: 41b9 Capabilities: [e0] Express (v1) Endpoint, MSI 00 DevCap: MaxPayload 128 bytes, PhantFunc 0, Latency L0s <512ns, L1 unlimited ExtTag- AttnBtn- AttnInd- PwrInd- RBE+ FLReset+ DevCtl: Report errors: Correctable- Non-Fatal- Fatal- Unsupported- RlxdOrd+ ExtTag- PhantFunc- AuxPwr- NoSnoop+ FLReset- MaxPayload 128 bytes, MaxReadReq 128 bytes DevSta: CorrErr+ UncorrErr- FatalErr- UnsuppReq+ AuxPwr+ TransPend- LnkCap: Port #0, Speed 2.5GT/s, Width x1, ASPM L0s L1, Latency L0 <128ns, L1 <32us ClockPM+ Suprise- LLActRep- BwNot- LnkCtl: ASPM L0s L1 Enabled; RCB 64 bytes Disabled- Retrain- CommClk+ ExtSynch- ClockPM+ AutWidDis- BWInt- AutBWInt- LnkSta: Speed 2.5GT/s, Width x1, TrErr- Train- SlotClk+ DLActive- BWMgmt- ABWMgmt- Capabilities: [100] Advanced Error Reporting UESta: DLP- SDES- TLP- FCP- CmpltTO- CmpltAbrt- UnxCmplt- RxOF- MalfTLP- ECRC- UnsupReq- ACSVoil- UEMsk: DLP- SDES- TLP- FCP- CmpltTO- CmpltAbrt- UnxCmplt- RxOF- MalfTLP- ECRC- UnsupReq- ACSVoil- UESvrt: DLP+ SDES- TLP- FCP+ CmpltTO- CmpltAbrt- UnxCmplt- RxOF+ MalfTLP+ ECRC- UnsupReq- ACSVoil- CESta: RxErr- BadTLP+ BadDLLP- Rollover- Timeout+ NonFatalErr+ CESta: RxErr- BadTLP- BadDLLP- Rollover- Timeout- NonFatalErr+ AERCap: First Error Pointer: 00, GenCap- CGenEn- ChkCap- ChkEn- Capabilities: [140] Device Serial Number a0-33-b2-ff-ff-ea-16-00 Kernel driver in use: iwlagn Kernel modules: iwlagn 15:00.0 CardBus bridge: Ricoh Co Ltd RL5c476 II (rev ba) Subsystem: Lenovo Device 20c6 Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 32, Cache Line Size: 64 bytes Interrupt: pin A routed to IRQ 16 Region 0: Memory at f4800000 (32-bit, non-prefetchable) [size=4K] Bus: primary=15, secondary=16, subordinate=17, sec-latency=176 Memory window 0: f0000000-f3fff000 (prefetchable) Memory window 1: 80000000-83fff000 (prefetchable) I/O window 0: 00004000-000040ff I/O window 1: 00004400-000044ff BridgeCtl: Parity- SERR- ISA- VGA- MAbort- >Reset- 16bInt+ PostWrite+ 16-bit legacy interface ports at 0001 Kernel modules: yenta_socket 15:00.1 FireWire (IEEE 1394): Ricoh Co Ltd R5C832 IEEE 1394 Controller (rev 04) (prog-if 10 [OHCI]) Subsystem: Lenovo Device 20c7 Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 32 (500ns min, 1000ns max), Cache Line Size: 64 bytes Interrupt: pin B routed to IRQ 17 Region 0: Memory at f4801000 (32-bit, non-prefetchable) [size=2K] Capabilities: [dc] Power Management version 2 Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA PME(D0+,D1+,D2+,D3hot+,D3cold+) Status: D0 PME-Enable- DSel=0 DScale=2 PME+ Kernel driver in use: ohci1394 Kernel modules: ohci1394 15:00.2 SD Host controller: Ricoh Co Ltd R5C822 SD/SDIO/MMC/MS/MSPro Host Adapter (rev 21) Subsystem: Lenovo Device 20c8 Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 32, Cache Line Size: 64 bytes Interrupt: pin C routed to IRQ 11 Region 0: Memory at f4801800 (32-bit, non-prefetchable) [size=256] Capabilities: [80] Power Management version 2 Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA PME(D0+,D1+,D2+,D3hot+,D3cold+) Status: D0 PME-Enable- DSel=0 DScale=2 PME- 15:00.3 System peripheral: Ricoh Co Ltd R5C843 MMC Host Controller (rev 11) Subsystem: Lenovo Device 20c9 Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 32, Cache Line Size: 64 bytes Interrupt: pin C routed to IRQ 11 Region 0: Memory at f4801c00 (32-bit, non-prefetchable) [size=256] Capabilities: [80] Power Management version 2 Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA PME(D0+,D1+,D2+,D3hot+,D3cold+) Status: D0 PME-Enable- DSel=0 DScale=2 PME- 15:00.4 System peripheral: Ricoh Co Ltd R5C592 Memory Stick Bus Host Adapter (rev 11) Subsystem: Lenovo Device 20ca Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 32, Cache Line Size: 64 bytes Interrupt: pin C routed to IRQ 11 Region 0: Memory at f4802000 (32-bit, non-prefetchable) [size=256] Capabilities: [80] Power Management version 2 Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA PME(D0+,D1+,D2+,D3hot+,D3cold+) Status: D0 PME-Enable- DSel=0 DScale=2 PME- 15:00.5 System peripheral: Ricoh Co Ltd xD-Picture Card Controller (rev 11) Subsystem: Lenovo Device 20cb Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 32, Cache Line Size: 64 bytes Interrupt: pin C routed to IRQ 11 Region 0: Memory at f4802400 (32-bit, non-prefetchable) [size=256] Capabilities: [80] Power Management version 2 Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA PME(D0+,D1+,D2+,D3hot+,D3cold+) Status: D0 PME-Enable- DSel=0 DScale=2 PME- ^ permalink raw reply [flat|nested] 9+ messages in thread
* Re: BUG: blank screen - unless keyboard/synaptic combo 2009-05-21 22:58 ` Niel Lambrechts @ 2009-05-22 3:39 ` Zhang Rui 2009-05-22 18:12 ` Niel Lambrechts 2009-05-22 18:18 ` Niel Lambrechts 0 siblings, 2 replies; 9+ messages in thread From: Zhang Rui @ 2009-05-22 3:39 UTC (permalink / raw) To: Niel Lambrechts; +Cc: linux-pci@vger.kernel.org, linux-acpi@vger.kernel.org is this a regression or it exists on all the kernel you've tried? please remote login the box after resume, and get the output of "xrandr --verbose". thanks, rui On Fri, 2009-05-22 at 06:58 +0800, Niel Lambrechts wrote: > Cc's added, attached lspci output. > > On 05/19/2009 08:38 PM, Niel Lambrechts wrote: > > I have a strange problem in that during a resume from hibernate my > > text console (or X) remains blank - that is, until I simultaneously > > press a keyboard key and touch the synaptic pad. It is not sufficient > > to press just one or the other, it needs to be done simultaneously and > > it resumes fine after doing this. > > I have tried quite hard to overcome this issue. All of the following hibernation > tests I tried involved booting into a text console, without ever starting X. > With each test I still had a blank screen upon resume, and each time it was > fully recoverable by pressing any keyboard key/synaptic pad touch combo. > > 1. Disabling a CPU core - NO CHANGE. > Based on a "multi-processor concurrency" fix mentioned on the web (Ubuntu bug > #272307). > > 2. Upgrade BIOS to latest level - NO CHANGE. > BIOS 6FET70WW, released 04/17/2009. > > 3. Switching to ATI Mobility Radeon HD 3650 graphics card. NO CHANGE. > My Lenovo W500 has "switchable graphics" BIOS option, and I tried this test with > both the integrated or the above-mentioned card without difference. > _This result seems quite interesting to me, as if it could be some type of bus > related freeze where the keyboard/synaptic combo plays a role._ > > 4. Disabling BIOS Options - NO CHANGE. > Enabling/disabling security chip features + TXT features. > Disabling fingerprint reader. > Disabling memory security feature. > > 5. Kernel options - NO CHANGE. > ACPI debugging - I enabled CONFIG_ACPI_DEBUG, but did not see any messages > generated when I pressed a keyboard key + synaptic mousepad combo that recovers > the console. > FIRMWARE_EDID - still testing this. > > Any suggestions on anything else I could try would be most welcome...! > > Thanks, > Niel > ^ permalink raw reply [flat|nested] 9+ messages in thread
* Re: BUG: blank screen - unless keyboard/synaptic combo 2009-05-22 3:39 ` Zhang Rui @ 2009-05-22 18:12 ` Niel Lambrechts 2009-05-25 5:58 ` Zhang Rui 2009-05-22 18:18 ` Niel Lambrechts 1 sibling, 1 reply; 9+ messages in thread From: Niel Lambrechts @ 2009-05-22 18:12 UTC (permalink / raw) To: Zhang Rui; +Cc: linux-pci@vger.kernel.org, linux-acpi@vger.kernel.org (fixed top posting) On 05/22/2009 05:39 AM, Zhang Rui wrote: > On Fri, 2009-05-22 at 06:58 +0800, Niel Lambrechts wrote: > >> Cc's added, attached lspci output. >> >> On 05/19/2009 08:38 PM, Niel Lambrechts wrote: >> >>> I have a strange problem in that during a resume from hibernate my >>> text console (or X) remains blank - that is, until I simultaneously >>> press a keyboard key and touch the synaptic pad. It is not sufficient >>> to press just one or the other, it needs to be done simultaneously and >>> it resumes fine after doing this. >>> > is this a regression or it exists on all the kernel you've tried? > Hi Zhang, It is not a recent regression, all of the kernels I tried back to 2.6.28 shows the same problem. The test results I posted last night was with 2.6.30-rc6. I suspect it did not happen in 2.6.27, but I might be wrong since I could not bisect that far back (I am using EXT4 and have too many issues to bisect that far back). > please remote login the box after resume, and get the output of > "xrandr --verbose". > When I resume from suspend to RAM there is no problem. When I resume from hibernate, my laptop actually remains unusable until I do the combination of things I mentioned. I cannot log in from remote or even ping the laptop, except if I first press the mentioned key combo. Before this, the display is either entirely blank or sometimes there is a white cursor in the top left corner. The blank screen happens in runlevel 3 without X or "i915" loaded - I'm not sure but I suppose you want the "xrandr" output for another reason. It is interesting that it happens regardless of whether I am using Intel integrated graphics or Mobility Radeon HD 3650 (my laptop has both and I can enable one at a time). I boot the system with vga=791 and it is using vesafb for console. I attached the output you asked for below after hibernating an Xorg session, but this is from just after pressing the combo as I could not log in over the network with the laptop in the blank state. Thanks, Niel niella@linux-7vph:> xrandr --verbose Screen 0: minimum 320 x 200, current 1600 x 1024, maximum 3840 x 1200 VGA disconnected 1600x1024+0+0 (0x3d) normal (normal left inverted right x axis y axis) 0mm x 0mm Identifier: 0x3b Timestamp: 184631 Subpixel: unknown Clones: CRTC: 0 CRTCs: 0 1 Transform: 1.000000 0.000000 0.000000 0.000000 1.000000 0.000000 0.000000 0.000000 1.000000 filter: 1600x1024 (0x3d) 136.4MHz *current h: width 1600 start 1704 end 1872 total 2144 skew 0 clock 63.6KHz v: height 1024 start 1025 end 1028 total 1060 clock 60.0Hz LVDS connected 1600x1024+0+0 (0x3d) normal (normal left inverted right x axis y axis) 331mm x 207mm Identifier: 0x3c Timestamp: 184631 Subpixel: horizontal rgb Clones: CRTC: 1 CRTCs: 1 Transform: 1.000000 0.000000 0.000000 0.000000 1.000000 0.000000 0.000000 0.000000 1.000000 filter: EDID_DATA: 00ffffffffffff0030ae554000000000 0011010380211578ea87f594574f8c27 27505400000001010101010101010101 0101010101018c41807a71b011403020 33004bcf100000197434802071b01440 302026004bcf100000190000000f00d1 0a32d10a281101004ca35532000000fe 004c544e31353455322d4c30350a0011 PANEL_FITTING: full_aspect supported: center full_aspect full BACKLIGHT_CONTROL: combination supported: native legacy combination kernel BACKLIGHT: 4722 (0x00001272) range: (0,4722) 1600x1024 (0x3d) 136.4MHz *current +preferred h: width 1600 start 1704 end 1872 total 2144 skew 0 clock 63.6KHz v: height 1024 start 1025 end 1028 total 1060 clock 60.0Hz 1920x1200 (0x3e) 167.8MHz -HSync -VSync +preferred h: width 1920 start 1968 end 2000 total 2298 skew 0 clock 73.0KHz v: height 1200 start 1203 end 1206 total 1217 clock 60.0Hz 1920x1200 (0x3f) 134.3MHz -HSync -VSync h: width 1920 start 1968 end 2000 total 2208 skew 0 clock 60.8KHz v: height 1200 start 1202 end 1208 total 1220 clock 49.8Hz 1600x1200 (0x40) 162.0MHz +HSync +VSync h: width 1600 start 1664 end 1856 total 2160 skew 0 clock 75.0KHz v: height 1200 start 1201 end 1204 total 1250 clock 60.0Hz 1400x1050 (0x41) 122.0MHz +HSync +VSync h: width 1400 start 1488 end 1640 total 1880 skew 0 clock 64.9KHz v: height 1050 start 1052 end 1064 total 1082 clock 60.0Hz 1280x1024 (0x42) 108.0MHz +HSync +VSync h: width 1280 start 1328 end 1440 total 1688 skew 0 clock 64.0KHz v: height 1024 start 1025 end 1028 total 1066 clock 60.0Hz 1280x960 (0x43) 108.0MHz +HSync +VSync h: width 1280 start 1376 end 1488 total 1800 skew 0 clock 60.0KHz v: height 960 start 961 end 964 total 1000 clock 60.0Hz 1024x768 (0x44) 65.0MHz -HSync -VSync h: width 1024 start 1048 end 1184 total 1344 skew 0 clock 48.4KHz v: height 768 start 771 end 777 total 806 clock 60.0Hz 800x600 (0x45) 40.0MHz +HSync +VSync h: width 800 start 840 end 968 total 1056 skew 0 clock 37.9KHz v: height 600 start 601 end 605 total 628 clock 60.3Hz 800x600 (0x46) 36.0MHz +HSync +VSync h: width 800 start 824 end 896 total 1024 skew 0 clock 35.2KHz v: height 600 start 601 end 603 total 625 clock 56.2Hz 640x480 (0x47) 25.2MHz -HSync -VSync h: width 640 start 656 end 752 total 800 skew 0 clock 31.5KHz v: height 480 start 490 end 492 total 525 clock 59.9Hz ^ permalink raw reply [flat|nested] 9+ messages in thread
* Re: BUG: blank screen - unless keyboard/synaptic combo 2009-05-22 18:12 ` Niel Lambrechts @ 2009-05-25 5:58 ` Zhang Rui 2009-05-25 6:35 ` Niel Lambrechts 0 siblings, 1 reply; 9+ messages in thread From: Zhang Rui @ 2009-05-25 5:58 UTC (permalink / raw) To: Niel Lambrechts; +Cc: linux-pci@vger.kernel.org, linux-acpi@vger.kernel.org please attach the dmesg output after S4 resume. thanks, rui On Sat, 2009-05-23 at 02:12 +0800, Niel Lambrechts wrote: > (fixed top posting) > > On 05/22/2009 05:39 AM, Zhang Rui wrote: > > On Fri, 2009-05-22 at 06:58 +0800, Niel Lambrechts wrote: > > > >> Cc's added, attached lspci output. > >> > >> On 05/19/2009 08:38 PM, Niel Lambrechts wrote: > >> > >>> I have a strange problem in that during a resume from hibernate my > >>> text console (or X) remains blank - that is, until I simultaneously > >>> press a keyboard key and touch the synaptic pad. It is not sufficient > >>> to press just one or the other, it needs to be done simultaneously and > >>> it resumes fine after doing this. > >>> > > is this a regression or it exists on all the kernel you've tried? > > > Hi Zhang, > > It is not a recent regression, all of the kernels I tried back to 2.6.28 > shows the same problem. The test results I posted last night was with > 2.6.30-rc6. I suspect it did not happen in 2.6.27, but I might be wrong > since I could not bisect that far back (I am using EXT4 and have too > many issues to bisect that far back). > > > please remote login the box after resume, and get the output of > > "xrandr --verbose". > > > > When I resume from suspend to RAM there is no problem. > > When I resume from hibernate, my laptop actually remains unusable until > I do the combination of things I mentioned. I cannot log in from remote > or even ping the laptop, except if I first press the mentioned key > combo. Before this, the display is either entirely blank or sometimes > there is a white cursor in the top left corner. > > The blank screen happens in runlevel 3 without X or "i915" loaded - I'm > not sure but I suppose you want the "xrandr" output for another reason. > It is interesting that it happens regardless of whether I am using Intel > integrated graphics or Mobility Radeon HD 3650 (my laptop has both and I > can enable one at a time). I boot the system with vga=791 and it is > using vesafb for console. > > I attached the output you asked for below after hibernating an Xorg > session, but this is from just after pressing the combo as I could not > log in over the network with the laptop in the blank state. > > Thanks, > Niel > > > niella@linux-7vph:> xrandr --verbose > Screen 0: minimum 320 x 200, current 1600 x 1024, maximum 3840 x 1200 > VGA disconnected 1600x1024+0+0 (0x3d) normal (normal left inverted right > x axis y axis) 0mm x 0mm > Identifier: 0x3b > Timestamp: 184631 > Subpixel: unknown > Clones: > CRTC: 0 > CRTCs: 0 1 > Transform: 1.000000 0.000000 0.000000 > 0.000000 1.000000 0.000000 > 0.000000 0.000000 1.000000 > filter: > 1600x1024 (0x3d) 136.4MHz *current > h: width 1600 start 1704 end 1872 total 2144 skew 0 clock > 63.6KHz > v: height 1024 start 1025 end 1028 total 1060 clock > 60.0Hz > LVDS connected 1600x1024+0+0 (0x3d) normal (normal left inverted right x > axis y axis) 331mm x 207mm > Identifier: 0x3c > Timestamp: 184631 > Subpixel: horizontal rgb > Clones: > CRTC: 1 > CRTCs: 1 > Transform: 1.000000 0.000000 0.000000 > 0.000000 1.000000 0.000000 > 0.000000 0.000000 1.000000 > filter: > EDID_DATA: > 00ffffffffffff0030ae554000000000 > 0011010380211578ea87f594574f8c27 > 27505400000001010101010101010101 > 0101010101018c41807a71b011403020 > 33004bcf100000197434802071b01440 > 302026004bcf100000190000000f00d1 > 0a32d10a281101004ca35532000000fe > 004c544e31353455322d4c30350a0011 > PANEL_FITTING: full_aspect > supported: center full_aspect full > BACKLIGHT_CONTROL: combination > supported: native legacy combination kernel > BACKLIGHT: 4722 (0x00001272) range: (0,4722) > 1600x1024 (0x3d) 136.4MHz *current +preferred > h: width 1600 start 1704 end 1872 total 2144 skew 0 clock > 63.6KHz > v: height 1024 start 1025 end 1028 total 1060 clock > 60.0Hz > 1920x1200 (0x3e) 167.8MHz -HSync -VSync +preferred > h: width 1920 start 1968 end 2000 total 2298 skew 0 clock > 73.0KHz > v: height 1200 start 1203 end 1206 total 1217 clock > 60.0Hz > 1920x1200 (0x3f) 134.3MHz -HSync -VSync > h: width 1920 start 1968 end 2000 total 2208 skew 0 clock > 60.8KHz > v: height 1200 start 1202 end 1208 total 1220 clock > 49.8Hz > 1600x1200 (0x40) 162.0MHz +HSync +VSync > h: width 1600 start 1664 end 1856 total 2160 skew 0 clock > 75.0KHz > v: height 1200 start 1201 end 1204 total 1250 clock > 60.0Hz > 1400x1050 (0x41) 122.0MHz +HSync +VSync > h: width 1400 start 1488 end 1640 total 1880 skew 0 clock > 64.9KHz > v: height 1050 start 1052 end 1064 total 1082 clock > 60.0Hz > 1280x1024 (0x42) 108.0MHz +HSync +VSync > h: width 1280 start 1328 end 1440 total 1688 skew 0 clock > 64.0KHz > v: height 1024 start 1025 end 1028 total 1066 clock > 60.0Hz > 1280x960 (0x43) 108.0MHz +HSync +VSync > h: width 1280 start 1376 end 1488 total 1800 skew 0 clock > 60.0KHz > v: height 960 start 961 end 964 total 1000 clock > 60.0Hz > 1024x768 (0x44) 65.0MHz -HSync -VSync > h: width 1024 start 1048 end 1184 total 1344 skew 0 clock > 48.4KHz > v: height 768 start 771 end 777 total 806 clock > 60.0Hz > 800x600 (0x45) 40.0MHz +HSync +VSync > h: width 800 start 840 end 968 total 1056 skew 0 clock > 37.9KHz > v: height 600 start 601 end 605 total 628 clock > 60.3Hz > 800x600 (0x46) 36.0MHz +HSync +VSync > h: width 800 start 824 end 896 total 1024 skew 0 clock > 35.2KHz > v: height 600 start 601 end 603 total 625 clock > 56.2Hz > 640x480 (0x47) 25.2MHz -HSync -VSync > h: width 640 start 656 end 752 total 800 skew 0 clock > 31.5KHz > v: height 480 start 490 end 492 total 525 clock > 59.9Hz > ^ permalink raw reply [flat|nested] 9+ messages in thread
* Re: BUG: blank screen - unless keyboard/synaptic combo 2009-05-25 5:58 ` Zhang Rui @ 2009-05-25 6:35 ` Niel Lambrechts 2009-06-01 5:08 ` Niel Lambrechts 0 siblings, 1 reply; 9+ messages in thread From: Niel Lambrechts @ 2009-05-25 6:35 UTC (permalink / raw) To: Zhang Rui; +Cc: linux-pci@vger.kernel.org, linux-acpi@vger.kernel.org [-- Attachment #1: Type: text/plain, Size: 7030 bytes --] Attached - this was using 2.6.30-rc6 and Xorg. Please let me know if you would also like dmesg output for when I do a console based resume. Regards, Niel On 05/25/2009 07:58 AM, Zhang Rui wrote: > please attach the dmesg output after S4 resume. > > thanks, > rui > > On Sat, 2009-05-23 at 02:12 +0800, Niel Lambrechts wrote: > >> (fixed top posting) >> >> On 05/22/2009 05:39 AM, Zhang Rui wrote: >> >>> On Fri, 2009-05-22 at 06:58 +0800, Niel Lambrechts wrote: >>> >>> >>>> Cc's added, attached lspci output. >>>> >>>> On 05/19/2009 08:38 PM, Niel Lambrechts wrote: >>>> >>>> >>>>> I have a strange problem in that during a resume from hibernate my >>>>> text console (or X) remains blank - that is, until I simultaneously >>>>> press a keyboard key and touch the synaptic pad. It is not sufficient >>>>> to press just one or the other, it needs to be done simultaneously and >>>>> it resumes fine after doing this. >>>>> >>>>> >>> is this a regression or it exists on all the kernel you've tried? >>> >>> >> Hi Zhang, >> >> It is not a recent regression, all of the kernels I tried back to 2.6.28 >> shows the same problem. The test results I posted last night was with >> 2.6.30-rc6. I suspect it did not happen in 2.6.27, but I might be wrong >> since I could not bisect that far back (I am using EXT4 and have too >> many issues to bisect that far back). >> >> >>> please remote login the box after resume, and get the output of >>> "xrandr --verbose". >>> >>> >> When I resume from suspend to RAM there is no problem. >> >> When I resume from hibernate, my laptop actually remains unusable until >> I do the combination of things I mentioned. I cannot log in from remote >> or even ping the laptop, except if I first press the mentioned key >> combo. Before this, the display is either entirely blank or sometimes >> there is a white cursor in the top left corner. >> >> The blank screen happens in runlevel 3 without X or "i915" loaded - I'm >> not sure but I suppose you want the "xrandr" output for another reason. >> It is interesting that it happens regardless of whether I am using Intel >> integrated graphics or Mobility Radeon HD 3650 (my laptop has both and I >> can enable one at a time). I boot the system with vga=791 and it is >> using vesafb for console. >> >> I attached the output you asked for below after hibernating an Xorg >> session, but this is from just after pressing the combo as I could not >> log in over the network with the laptop in the blank state. >> >> Thanks, >> Niel >> >> >> niella@linux-7vph:> xrandr --verbose >> Screen 0: minimum 320 x 200, current 1600 x 1024, maximum 3840 x 1200 >> VGA disconnected 1600x1024+0+0 (0x3d) normal (normal left inverted right >> x axis y axis) 0mm x 0mm >> Identifier: 0x3b >> Timestamp: 184631 >> Subpixel: unknown >> Clones: >> CRTC: 0 >> CRTCs: 0 1 >> Transform: 1.000000 0.000000 0.000000 >> 0.000000 1.000000 0.000000 >> 0.000000 0.000000 1.000000 >> filter: >> 1600x1024 (0x3d) 136.4MHz *current >> h: width 1600 start 1704 end 1872 total 2144 skew 0 clock >> 63.6KHz >> v: height 1024 start 1025 end 1028 total 1060 clock >> 60.0Hz >> LVDS connected 1600x1024+0+0 (0x3d) normal (normal left inverted right x >> axis y axis) 331mm x 207mm >> Identifier: 0x3c >> Timestamp: 184631 >> Subpixel: horizontal rgb >> Clones: >> CRTC: 1 >> CRTCs: 1 >> Transform: 1.000000 0.000000 0.000000 >> 0.000000 1.000000 0.000000 >> 0.000000 0.000000 1.000000 >> filter: >> EDID_DATA: >> 00ffffffffffff0030ae554000000000 >> 0011010380211578ea87f594574f8c27 >> 27505400000001010101010101010101 >> 0101010101018c41807a71b011403020 >> 33004bcf100000197434802071b01440 >> 302026004bcf100000190000000f00d1 >> 0a32d10a281101004ca35532000000fe >> 004c544e31353455322d4c30350a0011 >> PANEL_FITTING: full_aspect >> supported: center full_aspect full >> BACKLIGHT_CONTROL: combination >> supported: native legacy combination kernel >> BACKLIGHT: 4722 (0x00001272) range: (0,4722) >> 1600x1024 (0x3d) 136.4MHz *current +preferred >> h: width 1600 start 1704 end 1872 total 2144 skew 0 clock >> 63.6KHz >> v: height 1024 start 1025 end 1028 total 1060 clock >> 60.0Hz >> 1920x1200 (0x3e) 167.8MHz -HSync -VSync +preferred >> h: width 1920 start 1968 end 2000 total 2298 skew 0 clock >> 73.0KHz >> v: height 1200 start 1203 end 1206 total 1217 clock >> 60.0Hz >> 1920x1200 (0x3f) 134.3MHz -HSync -VSync >> h: width 1920 start 1968 end 2000 total 2208 skew 0 clock >> 60.8KHz >> v: height 1200 start 1202 end 1208 total 1220 clock >> 49.8Hz >> 1600x1200 (0x40) 162.0MHz +HSync +VSync >> h: width 1600 start 1664 end 1856 total 2160 skew 0 clock >> 75.0KHz >> v: height 1200 start 1201 end 1204 total 1250 clock >> 60.0Hz >> 1400x1050 (0x41) 122.0MHz +HSync +VSync >> h: width 1400 start 1488 end 1640 total 1880 skew 0 clock >> 64.9KHz >> v: height 1050 start 1052 end 1064 total 1082 clock >> 60.0Hz >> 1280x1024 (0x42) 108.0MHz +HSync +VSync >> h: width 1280 start 1328 end 1440 total 1688 skew 0 clock >> 64.0KHz >> v: height 1024 start 1025 end 1028 total 1066 clock >> 60.0Hz >> 1280x960 (0x43) 108.0MHz +HSync +VSync >> h: width 1280 start 1376 end 1488 total 1800 skew 0 clock >> 60.0KHz >> v: height 960 start 961 end 964 total 1000 clock >> 60.0Hz >> 1024x768 (0x44) 65.0MHz -HSync -VSync >> h: width 1024 start 1048 end 1184 total 1344 skew 0 clock >> 48.4KHz >> v: height 768 start 771 end 777 total 806 clock >> 60.0Hz >> 800x600 (0x45) 40.0MHz +HSync +VSync >> h: width 800 start 840 end 968 total 1056 skew 0 clock >> 37.9KHz >> v: height 600 start 601 end 605 total 628 clock >> 60.3Hz >> 800x600 (0x46) 36.0MHz +HSync +VSync >> h: width 800 start 824 end 896 total 1024 skew 0 clock >> 35.2KHz >> v: height 600 start 601 end 603 total 625 clock >> 56.2Hz >> 640x480 (0x47) 25.2MHz -HSync -VSync >> h: width 640 start 656 end 752 total 800 skew 0 clock >> 31.5KHz >> v: height 480 start 490 end 492 total 525 clock >> 59.9Hz >> >> > > [-- Attachment #2: dmesg.txt --] [-- Type: text/plain, Size: 62490 bytes --] Linux version 2.6.30-rc6-pae (niella@linux-7vph) (gcc version 4.3.2 [gcc-4_3-branch revision 141291] (SUSE Linux) ) #52 SMP Sat May 23 03:12:27 SAST 2009 KERNEL supported cpus: Intel GenuineIntel AMD AuthenticAMD NSC Geode by NSC Cyrix CyrixInstead Centaur CentaurHauls Transmeta GenuineTMx86 Transmeta TransmetaCPU UMC UMC UMC UMC BIOS-provided physical RAM map: BIOS-e820: 0000000000000000 - 000000000009ec00 (usable) BIOS-e820: 000000000009ec00 - 00000000000a0000 (reserved) BIOS-e820: 00000000000dc000 - 0000000000100000 (reserved) BIOS-e820: 0000000000100000 - 000000007c6a1000 (usable) BIOS-e820: 000000007c6a1000 - 000000007c6a7000 (reserved) BIOS-e820: 000000007c6a7000 - 000000007c7b7000 (usable) BIOS-e820: 000000007c7b7000 - 000000007c80f000 (reserved) BIOS-e820: 000000007c80f000 - 000000007c8c7000 (usable) BIOS-e820: 000000007c8c7000 - 000000007c8d2000 (ACPI NVS) BIOS-e820: 000000007c8d2000 - 000000007c8d5000 (ACPI data) BIOS-e820: 000000007c8d5000 - 000000007c8d9000 (reserved) BIOS-e820: 000000007c8d9000 - 000000007c8dd000 (ACPI NVS) BIOS-e820: 000000007c8dd000 - 000000007c8e0000 (reserved) BIOS-e820: 000000007c8e0000 - 000000007c907000 (ACPI NVS) BIOS-e820: 000000007c907000 - 000000007c908000 (ACPI data) BIOS-e820: 000000007c908000 - 000000007cb0f000 (reserved) BIOS-e820: 000000007cb0f000 - 000000007cb9f000 (ACPI NVS) BIOS-e820: 000000007cb9f000 - 000000007cbff000 (ACPI data) BIOS-e820: 000000007cbff000 - 000000007cc00000 (usable) BIOS-e820: 000000007cc00000 - 000000007f000000 (reserved) BIOS-e820: 00000000e0000000 - 00000000f0000000 (reserved) BIOS-e820: 00000000fec00000 - 00000000fec10000 (reserved) BIOS-e820: 00000000fed00000 - 00000000fed00400 (reserved) BIOS-e820: 00000000fed10000 - 00000000fed14000 (reserved) BIOS-e820: 00000000fed18000 - 00000000fed1a000 (reserved) BIOS-e820: 00000000fed1c000 - 00000000fed90000 (reserved) BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved) BIOS-e820: 00000000ff800000 - 0000000100000000 (reserved) DMI present. last_pfn = 0x7cc00 max_arch_pfn = 0x100000 MTRR default type: uncachable MTRR fixed ranges enabled: 00000-9FFFF write-back A0000-BFFFF uncachable C0000-D3FFF write-protect D4000-DBFFF uncachable DC000-FFFFF write-protect MTRR variable ranges enabled: 0 base 07D000000 mask FFF000000 uncachable 1 base 07E000000 mask FFE000000 uncachable 2 base 000000000 mask F80000000 write-back 3 base 07CE00000 mask FFFE00000 uncachable 4 disabled 5 disabled 6 disabled x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106 init_memory_mapping: 0000000000000000-00000000377fe000 0000000000 - 0000400000 page 4k 0000400000 - 0037400000 page 2M 0037400000 - 00377fe000 page 4k kernel direct mapping tables up to 377fe000 @ 7000-c000 RAMDISK: 37a36000 - 37fef772 Allocated new RAMDISK: 0050e000 - 00ac7772 Move RAMDISK from 0000000037a36000 - 0000000037fef771 to 0050e000 - 00ac7771 ACPI: RSDP 000f6490 00024 (v02 LENOVO) ACPI: XSDT 7cb4a1df 00094 (v01 LENOVO TP-6F 00003000 LTP 00000000) ACPI: FACP 7cb4a300 000F4 (v03 LENOVO TP-6F 00003000 LNVO 00000001) ACPI: DSDT 7cb4a6db 0F48F (v01 LENOVO TP-6F 00003000 MSFT 03000000) ACPI: FACS 7cb8e000 00040 ACPI: SSDT 7cb4a4b4 00227 (v01 LENOVO TP-6F 00003000 MSFT 03000000) ACPI: ECDT 7cb59b6a 00052 (v01 LENOVO TP-6F 00003000 LNVO 00000001) ACPI: APIC 7cb59bbc 00078 (v01 LENOVO TP-6F 00003000 LNVO 00000001) ACPI: MCFG 7cb59c34 0003C (v01 LENOVO TP-6F 00003000 LNVO 00000001) ACPI: HPET 7cb59c70 00038 (v01 LENOVO TP-6F 00003000 LNVO 00000001) ACPI: SLIC 7cb59dc2 00176 (v01 LENOVO TP-6F 00003000 LTP 00000000) ACPI: BOOT 7cb59f38 00028 (v01 LENOVO TP-6F 00003000 LTP 00000001) ACPI: ASF! 7cb59f60 000A0 (v16 LENOVO TP-6F 00003000 PTL 00000001) ACPI: SSDT 7cb8d213 0054F (v01 LENOVO TP-6F 00003000 INTL 20050513) ACPI: TCPA 7c907000 00032 (v00 00000000 00000000) ACPI: SSDT 7c8d4000 00655 (v01 PmRef CpuPm 00003000 INTL 20050624) ACPI: SSDT 7c8d3000 00274 (v01 PmRef Cpu0Tst 00003000 INTL 20050624) ACPI: SSDT 7c8d2000 00242 (v01 PmRef ApTst 00003000 INTL 20050624) ACPI: Local APIC address 0xfee00000 1108MB HIGHMEM available. 887MB LOWMEM available. mapped low ram: 0 - 377fe000 low ram: 0 - 377fe000 node 0 low ram: 00000000 - 377fe000 node 0 bootmap 00008000 - 0000ef00 (9 early reservations) ==> bootmem [0000000000 - 00377fe000] #0 [0000000000 - 0000001000] BIOS data page ==> [0000000000 - 0000001000] #1 [0000001000 - 0000002000] EX TRAMPOLINE ==> [0000001000 - 0000002000] #2 [0000006000 - 0000007000] TRAMPOLINE ==> [0000006000 - 0000007000] #3 [0000100000 - 000050a558] TEXT DATA BSS ==> [0000100000 - 000050a558] #4 [000009ec00 - 0000100000] BIOS reserved ==> [000009ec00 - 0000100000] #5 [000050b000 - 000050d16c] BRK ==> [000050b000 - 000050d16c] #6 [0000007000 - 0000008000] PGTABLE ==> [0000007000 - 0000008000] #7 [000050e000 - 0000ac7772] NEW RAMDISK ==> [000050e000 - 0000ac7772] #8 [0000008000 - 000000f000] BOOTMAP ==> [0000008000 - 000000f000] found SMP MP-table at [c00f64d0] f64d0 Zone PFN ranges: DMA 0x00000000 -> 0x00001000 Normal 0x00001000 -> 0x000377fe HighMem 0x000377fe -> 0x0007cc00 Movable zone start PFN for each node early_node_map[5] active PFN ranges 0: 0x00000000 -> 0x0000009e 0: 0x00000100 -> 0x0007c6a1 0: 0x0007c6a7 -> 0x0007c7b7 0: 0x0007c80f -> 0x0007c8c7 0: 0x0007cbff -> 0x0007cc00 On node 0 totalpages: 509960 free_area_init_node: node 0, pgdat c0428380, node_mem_map c1000000 DMA zone: 32 pages used for memmap DMA zone: 0 pages reserved DMA zone: 3966 pages, LIFO batch:0 Normal zone: 1744 pages used for memmap Normal zone: 221486 pages, LIFO batch:31 HighMem zone: 2217 pages used for memmap HighMem zone: 280515 pages, LIFO batch:31 Using APIC driver default ACPI: PM-Timer IO Port: 0x1008 ACPI: Local APIC address 0xfee00000 ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled) ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled) ACPI: LAPIC (acpi_id[0x02] lapic_id[0x02] disabled) ACPI: LAPIC (acpi_id[0x03] lapic_id[0x03] disabled) ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1]) ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1]) ACPI: IOAPIC (id[0x01] address[0xfec00000] gsi_base[0]) IOAPIC[0]: apic_id 1, version 32, address 0xfec00000, GSI 0-23 ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level) ACPI: IRQ0 used by override. ACPI: IRQ2 used by override. ACPI: IRQ9 used by override. Enabling APIC mode: Flat. Using 1 I/O APICs Using ACPI (MADT) for SMP configuration information ACPI: HPET id: 0x8086a201 base: 0xfed00000 SMP: Allowing 4 CPUs, 2 hotplug CPUs nr_irqs_gsi: 24 PM: Registered nosave memory: 000000000009e000 - 000000000009f000 PM: Registered nosave memory: 000000000009f000 - 00000000000a0000 PM: Registered nosave memory: 00000000000a0000 - 00000000000dc000 PM: Registered nosave memory: 00000000000dc000 - 0000000000100000 Allocating PCI resources starting at 80000000 (gap: 7f000000:61000000) NR_CPUS:4 nr_cpumask_bits:4 nr_cpu_ids:4 nr_node_ids:1 PERCPU: Embedded 11 pages at c1fa2000, static data 21532 bytes Built 1 zonelists in Zone order, mobility grouping on. Total pages: 505967 Kernel command line: root=/dev/disk/by-id/ata-HITACHI_HTS722020K9SA00_FDE_080726DP0470DTGMUNPC-part6 resume=/dev/disk/by-id/ata-HITACHI_HTS722020K9SA00_FDE_080726DP0470DTGMUNPC-part5 splash=silent showopts vga=791 Enabling fast FPU save and restore... done. Enabling unmasked SIMD FPU exception support... done. Initializing CPU#0 NR_IRQS:384 PID hash table entries: 4096 (order: 12, 16384 bytes) Extended CMOS year: 2000 Fast TSC calibration using PIT Detected 2526.363 MHz processor. Console: colour dummy device 80x25 console [tty0] enabled Dentry cache hash table entries: 131072 (order: 7, 524288 bytes) Inode-cache hash table entries: 65536 (order: 6, 262144 bytes) Initializing HighMem for node 0 (000377fe:0007cc00) Memory: 2011976k/2043904k available (2071k kernel code, 27028k reserved, 1245k data, 328k init, 1130928k highmem) virtual kernel memory layout: fixmap : 0xfff82000 - 0xfffff000 ( 500 kB) pkmap : 0xff800000 - 0xffc00000 (4096 kB) vmalloc : 0xf7ffe000 - 0xff7fe000 ( 120 MB) lowmem : 0xc0000000 - 0xf77fe000 ( 887 MB) .init : 0xc0444000 - 0xc0496000 ( 328 kB) .data : 0xc0305fc6 - 0xc043d54c (1245 kB) .text : 0xc0100000 - 0xc0305fc6 (2071 kB) Checking if this processor honours the WP bit even in supervisor mode...Ok. hpet clockevent registered HPET: 4 timers in total, 0 timers will be used for per-cpu timer Calibrating delay loop (skipped), value calculated using timer frequency.. 5052.72 BogoMIPS (lpj=10105452) Security Framework initialized Mount-cache hash table entries: 512 CPU: L1 I cache: 32K, L1 D cache: 32K CPU: L2 cache: 6144K CPU: Physical Processor ID: 0 CPU: Processor Core ID: 0 Intel machine check architecture supported. Intel machine check reporting enabled on CPU#0. using mwait in idle threads. Checking 'hlt' instruction... OK. ACPI: Core revision 20090320 ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1 CPU0: Intel(R) Core(TM)2 Duo CPU T9400 @ 2.53GHz stepping 06 Booting processor 1 APIC 0x1 ip 0x6000 Initializing CPU#1 Calibrating delay using timer specific routine.. 5054.04 BogoMIPS (lpj=10108096) CPU: L1 I cache: 32K, L1 D cache: 32K CPU: L2 cache: 6144K CPU: Physical Processor ID: 0 CPU: Processor Core ID: 1 Intel machine check architecture supported. Intel machine check reporting enabled on CPU#1. x86 PAT enabled: cpu 1, old 0x7040600070406, new 0x7010600070106 CPU1: Intel(R) Core(TM)2 Duo CPU T9400 @ 2.53GHz stepping 06 checking TSC synchronization [CPU#0 -> CPU#1]: passed. Brought up 2 CPUs Total of 2 processors activated (10106.77 BogoMIPS). CPU0 attaching sched-domain: domain 0: span 0-1 level MC groups: 0 1 CPU1 attaching sched-domain: domain 0: span 0-1 level MC groups: 1 0 net_namespace: 1000 bytes Booting paravirtualized kernel on bare hardware NET: Registered protocol family 16 ACPI FADT declares the system doesn't support PCIe ASPM, so disable it ACPI: bus type pci registered PCI: MCFG configuration 0: base e0000000 segment 0 buses 0 - 63 PCI: MCFG area at e0000000 reserved in E820 PCI: Using MMCONFIG for extended config space PCI: Using configuration type 1 for base access bio: create slab <bio-0> at 0 ACPI: EC: EC description table is found, configuring boot EC ACPI: BIOS _OSI(Linux) query ignored ACPI: EC: non-query interrupt received, switching to interrupt mode ACPI: Interpreter enabled ACPI: (supports S0 S3 S4 S5) ACPI: Using IOAPIC for interrupt routing ACPI: EC: GPE = 0x11, I/O: command/status = 0x66, data = 0x62 ACPI: EC: driver started in interrupt mode ACPI: Power Resource [PUBS] (on) ACPI: ACPI Dock Station Driver: 3 docks/bays found ACPI: PCI Root Bridge [PCI0] (0000:00) pci 0000:00:02.0: reg 10 64bit mmio: [0xf4400000-0xf47fffff] pci 0000:00:02.0: reg 18 64bit mmio: [0xd0000000-0xdfffffff] pci 0000:00:02.0: reg 20 io port: [0x1800-0x1807] pci 0000:00:02.1: reg 10 64bit mmio: [0xf4200000-0xf42fffff] pci 0000:00:03.0: reg 10 64bit mmio: [0xfc226800-0xfc22680f] pci 0000:00:03.0: PME# supported from D0 D3hot D3cold pci 0000:00:03.0: PME# disabled pci 0000:00:19.0: reg 10 32bit mmio: [0xfc000000-0xfc01ffff] pci 0000:00:19.0: reg 14 32bit mmio: [0xfc025000-0xfc025fff] pci 0000:00:19.0: reg 18 io port: [0x1840-0x185f] pci 0000:00:19.0: PME# supported from D0 D3hot D3cold pci 0000:00:19.0: PME# disabled pci 0000:00:1a.0: reg 20 io port: [0x1860-0x187f] pci 0000:00:1a.1: reg 20 io port: [0x1880-0x189f] pci 0000:00:1a.2: reg 20 io port: [0x18a0-0x18bf] pci 0000:00:1a.7: reg 10 32bit mmio: [0xfc226c00-0xfc226fff] pci 0000:00:1a.7: PME# supported from D0 D3hot D3cold pci 0000:00:1a.7: PME# disabled pci 0000:00:1b.0: reg 10 64bit mmio: [0xfc020000-0xfc023fff] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold pci 0000:00:1b.0: PME# disabled pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold pci 0000:00:1c.0: PME# disabled pci 0000:00:1c.1: PME# supported from D0 D3hot D3cold pci 0000:00:1c.1: PME# disabled pci 0000:00:1c.3: PME# supported from D0 D3hot D3cold pci 0000:00:1c.3: PME# disabled pci 0000:00:1c.4: PME# supported from D0 D3hot D3cold pci 0000:00:1c.4: PME# disabled pci 0000:00:1d.0: reg 20 io port: [0x18c0-0x18df] pci 0000:00:1d.1: reg 20 io port: [0x18e0-0x18ff] pci 0000:00:1d.2: reg 20 io port: [0x1c00-0x1c1f] pci 0000:00:1d.7: reg 10 32bit mmio: [0xfc227000-0xfc2273ff] pci 0000:00:1d.7: PME# supported from D0 D3hot D3cold pci 0000:00:1d.7: PME# disabled pci 0000:00:1f.2: reg 10 io port: [0x1c48-0x1c4f] pci 0000:00:1f.2: reg 14 io port: [0x183c-0x183f] pci 0000:00:1f.2: reg 18 io port: [0x1c40-0x1c47] pci 0000:00:1f.2: reg 1c io port: [0x1838-0x183b] pci 0000:00:1f.2: reg 20 io port: [0x1c20-0x1c3f] pci 0000:00:1f.2: reg 24 32bit mmio: [0xfc226000-0xfc2267ff] pci 0000:00:1f.2: PME# supported from D3hot pci 0000:00:1f.2: PME# disabled pci 0000:00:1f.3: reg 10 64bit mmio: [0xfc227400-0xfc2274ff] pci 0000:00:1f.3: reg 20 io port: [0x1c60-0x1c7f] pci 0000:03:00.0: reg 10 64bit mmio: [0xf4300000-0xf4301fff] pci 0000:03:00.0: PME# supported from D0 D3hot D3cold pci 0000:03:00.0: PME# disabled pci 0000:00:1c.1: bridge 32bit mmio: [0xf4300000-0xf43fffff] pci 0000:00:1c.3: bridge io port: [0x2000-0x2fff] pci 0000:00:1c.3: bridge 32bit mmio: [0xf8000000-0xf9ffffff] pci 0000:00:1c.3: bridge 64bit mmio pref: [0xf4000000-0xf40fffff] pci 0000:00:1c.4: bridge io port: [0x3000-0x3fff] pci 0000:00:1c.4: bridge 32bit mmio: [0xfa000000-0xfbffffff] pci 0000:00:1c.4: bridge 64bit mmio pref: [0xf4100000-0xf41fffff] pci 0000:15:00.0: reg 10 32bit mmio: [0xf4800000-0xf4800fff] pci 0000:15:00.0: supports D1 D2 pci 0000:15:00.0: PME# supported from D0 D1 D2 D3hot D3cold pci 0000:15:00.0: PME# disabled pci 0000:15:00.1: reg 10 32bit mmio: [0xf4801000-0xf48017ff] pci 0000:15:00.1: supports D1 D2 pci 0000:15:00.1: PME# supported from D0 D1 D2 D3hot D3cold pci 0000:15:00.1: PME# disabled pci 0000:15:00.2: reg 10 32bit mmio: [0xf4801800-0xf48018ff] pci 0000:15:00.2: supports D1 D2 pci 0000:15:00.2: PME# supported from D0 D1 D2 D3hot D3cold pci 0000:15:00.2: PME# disabled pci 0000:15:00.3: reg 10 32bit mmio: [0xf4801c00-0xf4801cff] pci 0000:15:00.3: supports D1 D2 pci 0000:15:00.3: PME# supported from D0 D1 D2 D3hot D3cold pci 0000:15:00.3: PME# disabled pci 0000:15:00.4: reg 10 32bit mmio: [0xf4802000-0xf48020ff] pci 0000:15:00.4: supports D1 D2 pci 0000:15:00.4: PME# supported from D0 D1 D2 D3hot D3cold pci 0000:15:00.4: PME# disabled pci 0000:15:00.5: reg 10 32bit mmio: [0xf4802400-0xf48024ff] pci 0000:15:00.5: supports D1 D2 pci 0000:15:00.5: PME# supported from D0 D1 D2 D3hot D3cold pci 0000:15:00.5: PME# disabled pci 0000:00:1e.0: transparent bridge pci 0000:00:1e.0: bridge io port: [0x4000-0x7fff] pci 0000:00:1e.0: bridge 32bit mmio: [0xf4800000-0xf7ffffff] pci 0000:00:1e.0: bridge 64bit mmio pref: [0xf0000000-0xf3ffffff] pci_bus 0000:00: on NUMA node 0 ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.EXP0._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.EXP1._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.EXP3._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.EXP4._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCI1._PRT] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 9 10 *11) ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 9 10 *11) ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 7 9 10 *11) ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 9 10 *11) ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 9 10 *11) ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 9 10 *11) ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 7 9 10 *11) ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 7 9 10 *11) PCI: Using ACPI for IRQ routing hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0 hpet0: 4 comparators, 64-bit 14.318180 MHz counter pnp: PnP ACPI init ACPI: bus type pnp registered pnp: PnP ACPI: found 10 devices ACPI: ACPI bus type pnp unregistered PnPBIOS: Disabled by ACPI PNP system 00:00: iomem range 0x0-0x9ffff could not be reserved system 00:00: iomem range 0xc0000-0xc3fff could not be reserved system 00:00: iomem range 0xc4000-0xc7fff could not be reserved system 00:00: iomem range 0xc8000-0xcbfff has been reserved system 00:00: iomem range 0xcc000-0xcffff has been reserved system 00:00: iomem range 0xd0000-0xd3fff could not be reserved system 00:00: iomem range 0xdc000-0xdffff could not be reserved system 00:00: iomem range 0xe0000-0xe3fff could not be reserved system 00:00: iomem range 0xe4000-0xe7fff could not be reserved system 00:00: iomem range 0xe8000-0xebfff could not be reserved system 00:00: iomem range 0xec000-0xeffff could not be reserved system 00:00: iomem range 0xf0000-0xfffff could not be reserved system 00:00: iomem range 0x100000-0x7effffff could not be reserved system 00:00: iomem range 0xfec00000-0xfed3ffff could not be reserved system 00:00: iomem range 0xfed4c000-0xffffffff could not be reserved system 00:02: ioport range 0x1000-0x107f has been reserved system 00:02: ioport range 0x1180-0x11ff has been reserved system 00:02: ioport range 0x800-0x80f has been reserved system 00:02: ioport range 0x15e0-0x15ef has been reserved system 00:02: ioport range 0x1600-0x167f has been reserved system 00:02: ioport range 0x1680-0x169f has been reserved system 00:02: iomem range 0xe0000000-0xefffffff has been reserved system 00:02: iomem range 0xfed1c000-0xfed1ffff has been reserved system 00:02: iomem range 0xfed10000-0xfed13fff has been reserved system 00:02: iomem range 0xfed18000-0xfed18fff has been reserved system 00:02: iomem range 0xfed19000-0xfed19fff has been reserved system 00:02: iomem range 0xfed45000-0xfed4bfff has been reserved pci 0000:00:1c.0: PCI bridge, secondary bus 0000:02 pci 0000:00:1c.0: IO window: disabled pci 0000:00:1c.0: MEM window: disabled pci 0000:00:1c.0: PREFETCH window: disabled pci 0000:00:1c.1: PCI bridge, secondary bus 0000:03 pci 0000:00:1c.1: IO window: disabled pci 0000:00:1c.1: MEM window: 0xf4300000-0xf43fffff pci 0000:00:1c.1: PREFETCH window: disabled pci 0000:00:1c.3: PCI bridge, secondary bus 0000:05 pci 0000:00:1c.3: IO window: 0x2000-0x2fff pci 0000:00:1c.3: MEM window: 0xf8000000-0xf9ffffff pci 0000:00:1c.3: PREFETCH window: 0x000000f4000000-0x000000f40fffff pci 0000:00:1c.4: PCI bridge, secondary bus 0000:0d pci 0000:00:1c.4: IO window: 0x3000-0x3fff pci 0000:00:1c.4: MEM window: 0xfa000000-0xfbffffff pci 0000:00:1c.4: PREFETCH window: 0x000000f4100000-0x000000f41fffff pci 0000:15:00.0: CardBus bridge, secondary bus 0000:16 pci 0000:15:00.0: IO window: 0x004000-0x0040ff pci 0000:15:00.0: IO window: 0x004400-0x0044ff pci 0000:15:00.0: PREFETCH window: 0xf0000000-0xf3ffffff pci 0000:15:00.0: MEM window: 0x80000000-0x83ffffff pci 0000:00:1e.0: PCI bridge, secondary bus 0000:15 pci 0000:00:1e.0: IO window: 0x4000-0x7fff pci 0000:00:1e.0: MEM window: 0xf4800000-0xf7ffffff pci 0000:00:1e.0: PREFETCH window: 0x000000f0000000-0x000000f3ffffff pci 0000:00:1c.0: PCI INT A -> GSI 20 (level, low) -> IRQ 20 pci 0000:00:1c.0: setting latency timer to 64 pci 0000:00:1c.1: PCI INT B -> GSI 21 (level, low) -> IRQ 21 pci 0000:00:1c.1: setting latency timer to 64 pci 0000:00:1c.3: PCI INT D -> GSI 23 (level, low) -> IRQ 23 pci 0000:00:1c.3: setting latency timer to 64 pci 0000:00:1c.4: PCI INT A -> GSI 20 (level, low) -> IRQ 20 pci 0000:00:1c.4: setting latency timer to 64 pci 0000:00:1e.0: setting latency timer to 64 pci 0000:15:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 pci_bus 0000:00: resource 0 io: [0x00-0xffff] pci_bus 0000:00: resource 1 mem: [0x000000-0xffffffff] pci_bus 0000:03: resource 1 mem: [0xf4300000-0xf43fffff] pci_bus 0000:05: resource 0 io: [0x2000-0x2fff] pci_bus 0000:05: resource 1 mem: [0xf8000000-0xf9ffffff] pci_bus 0000:05: resource 2 pref mem [0xf4000000-0xf40fffff] pci_bus 0000:0d: resource 0 io: [0x3000-0x3fff] pci_bus 0000:0d: resource 1 mem: [0xfa000000-0xfbffffff] pci_bus 0000:0d: resource 2 pref mem [0xf4100000-0xf41fffff] pci_bus 0000:15: resource 0 io: [0x4000-0x7fff] pci_bus 0000:15: resource 1 mem: [0xf4800000-0xf7ffffff] pci_bus 0000:15: resource 2 pref mem [0xf0000000-0xf3ffffff] pci_bus 0000:15: resource 3 io: [0x00-0xffff] pci_bus 0000:15: resource 4 mem: [0x000000-0xffffffff] pci_bus 0000:16: resource 0 io: [0x4000-0x40ff] pci_bus 0000:16: resource 1 io: [0x4400-0x44ff] pci_bus 0000:16: resource 2 pref mem [0xf0000000-0xf3ffffff] pci_bus 0000:16: resource 3 mem: [0x80000000-0x83ffffff] NET: Registered protocol family 2 IP route cache hash table entries: 32768 (order: 5, 131072 bytes) TCP established hash table entries: 131072 (order: 8, 1048576 bytes) TCP bind hash table entries: 65536 (order: 7, 524288 bytes) TCP: Hash tables configured (established 131072 bind 65536) TCP reno registered NET: Registered protocol family 1 Unpacking initramfs... Switched to high resolution mode on CPU 1 Switched to high resolution mode on CPU 0 Freeing initrd memory: 5861k freed Simple Boot Flag at 0x35 set to 0x1 Machine check exception polling timer started. audit: initializing netlink socket (disabled) type=2000 audit(1243081993.900:1): initialized highmem bounce pool size: 64 pages HugeTLB registered 4 MB page size, pre-allocated 0 pages VFS: Disk quotas dquot_6.5.2 Dquot-cache hash table entries: 1024 (order 0, 4096 bytes) msgmni has been set to 1733 alg: No test for stdrng (krng) Block layer SCSI generic (bsg) driver version 0.4 loaded (major 254) io scheduler noop registered io scheduler anticipatory registered io scheduler deadline registered io scheduler cfq registered (default) pci 0000:00:02.0: Boot video device pcieport-driver 0000:00:1c.0: irq 24 for MSI/MSI-X pcieport-driver 0000:00:1c.0: setting latency timer to 64 pcieport-driver 0000:00:1c.1: irq 25 for MSI/MSI-X pcieport-driver 0000:00:1c.1: setting latency timer to 64 pcieport-driver 0000:00:1c.3: irq 26 for MSI/MSI-X pcieport-driver 0000:00:1c.3: setting latency timer to 64 pcieport-driver 0000:00:1c.4: irq 27 for MSI/MSI-X pcieport-driver 0000:00:1c.4: setting latency timer to 64 vesafb: framebuffer at 0xd0000000, mapped to 0xf8080000, using 3072k, total 32704k vesafb: mode is 1024x768x16, linelength=2048, pages=20 vesafb: scrolling: redraw vesafb: Truecolor: size=0:5:6:5, shift=0:11:5:0 Console: switching to colour frame buffer device 128x48 fb0: VESA VGA frame buffer device isapnp: Scanning for PnP cards... isapnp: No Plug & Play device found r3964: Philips r3964 Driver $Revision: 1.10 $ Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled floppy0: no floppy controllers found PNP: PS/2 Controller [PNP0303:KBD,PNP0f13:MOU] at 0x60,0x64 irq 1,12 serio: i8042 KBD port at 0x60,0x64 irq 1 serio: i8042 AUX port at 0x60,0x64 irq 12 mice: PS/2 mouse device common for all mice input: PC Speaker as /devices/platform/pcspkr/input/input0 cpuidle: using governor ladder cpuidle: using governor menu Using IPI No-Shortcut mode input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input1 Synaptics Touchpad, model: 1, fw: 7.0, id: 0x1c0b1, caps: 0xd04791/0xb00000 serio: Synaptics pass-through port at isa0060/serio1/input0 input: SynPS/2 Synaptics TouchPad as /devices/platform/i8042/serio1/input/input2 IBM TrackPoint firmware: 0x0e, buttons: 3/3 input: TPPS/2 IBM TrackPoint as /devices/platform/i8042/serio1/serio2/input/input3 registered taskstats version 1 Freeing unused kernel memory: 328k freed Write protecting the kernel text: 2072k Write protecting the kernel read-only data: 1032k ACPI: SSDT 7c8d7c20 002C8 (v01 PmRef Cpu0Ist 00003000 INTL 20050624) ACPI: SSDT 7c8d5020 0087A (v01 PmRef Cpu0Cst 00003001 INTL 20050624) ACPI Warning (processor_throttling-0843): Invalid throttling state, reset [20090320] Monitor-Mwait will be used to enter C-1 state Monitor-Mwait will be used to enter C-2 state Monitor-Mwait will be used to enter C-3 state Marking TSC unstable due to TSC halts in idle ACPI: CPU0 (power states: C1[C1] C2[C2] C3[C3]) processor ACPI_CPU:00: registered as cooling_device0 ACPI: Processor [CPU0] (supports 8 throttling states) ACPI: SSDT 7c8d6ca0 001CF (v01 PmRef ApIst 00003000 INTL 20050624) ACPI: SSDT 7c8d6f20 0008D (v01 PmRef ApCst 00003000 INTL 20050624) ACPI Warning (processor_throttling-0843): Invalid throttling state, reset [20090320] ACPI: CPU1 (power states: C1[C1] C2[C2] C3[C3]) processor ACPI_CPU:01: registered as cooling_device1 ACPI: Processor [CPU1] (supports 8 throttling states) thermal LNXTHERM:01: registered as thermal_zone0 ACPI: Thermal Zone [THM0] (40 C) thermal LNXTHERM:02: registered as thermal_zone1 ACPI: Thermal Zone [THM1] (33 C) SCSI subsystem initialized libata version 3.00 loaded. ahci 0000:00:1f.2: version 3.0 ahci 0000:00:1f.2: PCI INT B -> GSI 16 (level, low) -> IRQ 16 ahci 0000:00:1f.2: irq 28 for MSI/MSI-X ahci: SSS flag set, parallel bus scan disabled ahci 0000:00:1f.2: AHCI 0001.0200 32 slots 4 ports 3 Gbps 0x3 impl SATA mode ahci 0000:00:1f.2: flags: 64bit ncq sntf stag pm led clo pio slum part ahci 0000:00:1f.2: setting latency timer to 64 scsi0 : ahci scsi1 : ahci scsi2 : ahci scsi3 : ahci ata1: SATA max UDMA/133 abar m2048@0xfc226000 port 0xfc226100 irq 28 ata2: SATA max UDMA/133 irq_stat 0x00000040, connection status changed ata3: DUMMY ata4: DUMMY ata1: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x16 frozen Clocksource tsc unstable (delta = -273369387 ns) ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 300) ata1.00: ACPI cmd ef/02:00:00:00:00:a0 succeeded ata1.00: ACPI cmd f5/00:00:00:00:00:a0 filtered out ata1.00: ACPI cmd ef/5f:00:00:00:00:a0 succeeded ata1.00: ACPI cmd ef/10:03:00:00:00:a0 filtered out ata1.00: ATA-8: HITACHI HTS722020K9SA00 FDE, DC4LC75A, max UDMA/133 ata1.00: 390721968 sectors, multi 16: LBA48 NCQ (depth 31/32) ata1.00: ACPI cmd ef/02:00:00:00:00:a0 succeeded ata1.00: ACPI cmd f5/00:00:00:00:00:a0 filtered out ata1.00: ACPI cmd ef/5f:00:00:00:00:a0 succeeded ata1.00: ACPI cmd ef/10:03:00:00:00:a0 filtered out ata1.00: configured for UDMA/133 ata1: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0 t4 ata1.00: configured for UDMA/133 ata1: EH complete scsi 0:0:0:0: Direct-Access ATA HITACHI HTS72202 DC4L PQ: 0 ANSI: 5 ata2: exception Emask 0x10 SAct 0x0 SErr 0x4040000 action 0x1e frozen ata2: SError: { CommWake DevExch } ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300) ata2.00: ACPI cmd e3/00:1f:00:00:00:a0 succeeded ata2.00: ACPI cmd e3/00:02:00:00:00:a0 succeeded ata2.00: ATAPI: HL-DT-ST DVDRAM GSA-U20N, HX10, max UDMA/133 ata2.00: ACPI cmd e3/00:1f:00:00:00:a0 succeeded ata2.00: ACPI cmd e3/00:02:00:00:00:a0 succeeded ata2.00: configured for UDMA/133 ata2: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0 t4 ata2: irq_stat 0x40000001 ata2: EH complete scsi 1:0:0:0: CD-ROM HL-DT-ST DVDRAM GSA-U20N HX10 PQ: 0 ANSI: 5 BIOS EDD facility v0.16 2004-Jun-25, 1 devices found udevd version 128 started usbcore: registered new interface driver usbfs usbcore: registered new interface driver hub usbcore: registered new device driver usb ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver ehci_hcd 0000:00:1a.7: power state changed by ACPI to D0 ehci_hcd 0000:00:1a.7: PCI INT D -> GSI 23 (level, low) -> IRQ 23 ehci_hcd 0000:00:1a.7: setting latency timer to 64 ehci_hcd 0000:00:1a.7: EHCI Host Controller ehci_hcd 0000:00:1a.7: new USB bus registered, assigned bus number 1 uhci_hcd: USB Universal Host Controller Interface driver ehci_hcd 0000:00:1a.7: debug port 1 ehci_hcd 0000:00:1a.7: cache line size of 32 is not supported ehci_hcd 0000:00:1a.7: irq 23, io mem 0xfc226c00 Driver 'sd' needs updating - please use bus_type methods ehci_hcd 0000:00:1a.7: USB 2.0 started, EHCI 1.00 usb usb1: New USB device found, idVendor=1d6b, idProduct=0002 usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 sd 0:0:0:0: [sda] 390721968 512-byte hardware sectors: (200 GB/186 GiB) sd 0:0:0:0: [sda] Write Protect is off sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA sda: sda1 sda2 sda3 sda4 <<6>usb usb1: Product: EHCI Host Controller sda5 sda6<6>usb usb1: Manufacturer: Linux 2.6.30-rc6-pae ehci_hcd usb usb1: SerialNumber: 0000:00:1a.7 sda7 > sd 0:0:0:0: [sda] Attached SCSI disk usb usb1: configuration #1 chosen from 1 choice hub 1-0:1.0: USB hub found hub 1-0:1.0: 6 ports detected uhci_hcd 0000:00:1a.0: power state changed by ACPI to D0 uhci_hcd 0000:00:1a.0: PCI INT A -> GSI 20 (level, low) -> IRQ 20 uhci_hcd 0000:00:1a.0: setting latency timer to 64 uhci_hcd 0000:00:1a.0: UHCI Host Controller uhci_hcd 0000:00:1a.0: new USB bus registered, assigned bus number 2 uhci_hcd 0000:00:1a.0: irq 20, io base 0x00001860 usb usb2: New USB device found, idVendor=1d6b, idProduct=0001 usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1 usb usb2: Product: UHCI Host Controller usb usb2: Manufacturer: Linux 2.6.30-rc6-pae uhci_hcd usb usb2: SerialNumber: 0000:00:1a.0 usb usb2: configuration #1 chosen from 1 choice hub 2-0:1.0: USB hub found hub 2-0:1.0: 2 ports detected ehci_hcd 0000:00:1d.7: power state changed by ACPI to D0 ehci_hcd 0000:00:1d.7: PCI INT D -> GSI 19 (level, low) -> IRQ 19 ehci_hcd 0000:00:1d.7: setting latency timer to 64 ehci_hcd 0000:00:1d.7: EHCI Host Controller ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 3 ehci_hcd 0000:00:1d.7: debug port 1 ehci_hcd 0000:00:1d.7: cache line size of 32 is not supported ehci_hcd 0000:00:1d.7: irq 19, io mem 0xfc227000 ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00 usb usb3: New USB device found, idVendor=1d6b, idProduct=0002 usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1 usb usb3: Product: EHCI Host Controller usb usb3: Manufacturer: Linux 2.6.30-rc6-pae ehci_hcd usb usb3: SerialNumber: 0000:00:1d.7 usb usb3: configuration #1 chosen from 1 choice hub 3-0:1.0: USB hub found hub 3-0:1.0: 6 ports detected uhci_hcd 0000:00:1a.1: PCI INT B -> GSI 21 (level, low) -> IRQ 21 uhci_hcd 0000:00:1a.1: setting latency timer to 64 uhci_hcd 0000:00:1a.1: UHCI Host Controller uhci_hcd 0000:00:1a.1: new USB bus registered, assigned bus number 4 uhci_hcd 0000:00:1a.1: irq 21, io base 0x00001880 usb usb4: New USB device found, idVendor=1d6b, idProduct=0001 usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1 usb usb4: Product: UHCI Host Controller usb usb4: Manufacturer: Linux 2.6.30-rc6-pae uhci_hcd usb usb4: SerialNumber: 0000:00:1a.1 usb usb4: configuration #1 chosen from 1 choice hub 4-0:1.0: USB hub found hub 4-0:1.0: 2 ports detected uhci_hcd 0000:00:1a.2: power state changed by ACPI to D0 uhci_hcd 0000:00:1a.2: PCI INT C -> GSI 22 (level, low) -> IRQ 22 uhci_hcd 0000:00:1a.2: setting latency timer to 64 uhci_hcd 0000:00:1a.2: UHCI Host Controller uhci_hcd 0000:00:1a.2: new USB bus registered, assigned bus number 5 uhci_hcd 0000:00:1a.2: irq 22, io base 0x000018a0 usb usb5: New USB device found, idVendor=1d6b, idProduct=0001 usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1 usb usb5: Product: UHCI Host Controller usb usb5: Manufacturer: Linux 2.6.30-rc6-pae uhci_hcd usb usb5: SerialNumber: 0000:00:1a.2 usb usb5: configuration #1 chosen from 1 choice hub 5-0:1.0: USB hub found hub 5-0:1.0: 2 ports detected uhci_hcd 0000:00:1d.0: power state changed by ACPI to D0 uhci_hcd 0000:00:1d.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 uhci_hcd 0000:00:1d.0: setting latency timer to 64 uhci_hcd 0000:00:1d.0: UHCI Host Controller uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 6 uhci_hcd 0000:00:1d.0: irq 16, io base 0x000018c0 usb usb6: New USB device found, idVendor=1d6b, idProduct=0001 usb usb6: New USB device strings: Mfr=3, Product=2, SerialNumber=1 usb usb6: Product: UHCI Host Controller usb usb6: Manufacturer: Linux 2.6.30-rc6-pae uhci_hcd usb usb6: SerialNumber: 0000:00:1d.0 usb usb6: configuration #1 chosen from 1 choice hub 6-0:1.0: USB hub found hub 6-0:1.0: 2 ports detected uhci_hcd 0000:00:1d.1: PCI INT B -> GSI 17 (level, low) -> IRQ 17 uhci_hcd 0000:00:1d.1: setting latency timer to 64 uhci_hcd 0000:00:1d.1: UHCI Host Controller uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 7 uhci_hcd 0000:00:1d.1: irq 17, io base 0x000018e0 usb usb7: New USB device found, idVendor=1d6b, idProduct=0001 usb usb7: New USB device strings: Mfr=3, Product=2, SerialNumber=1 usb usb7: Product: UHCI Host Controller usb usb7: Manufacturer: Linux 2.6.30-rc6-pae uhci_hcd usb usb7: SerialNumber: 0000:00:1d.1 usb usb7: configuration #1 chosen from 1 choice hub 7-0:1.0: USB hub found hub 7-0:1.0: 2 ports detected uhci_hcd 0000:00:1d.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18 uhci_hcd 0000:00:1d.2: setting latency timer to 64 uhci_hcd 0000:00:1d.2: UHCI Host Controller uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 8 uhci_hcd 0000:00:1d.2: irq 18, io base 0x00001c00 usb usb8: New USB device found, idVendor=1d6b, idProduct=0001 usb usb8: New USB device strings: Mfr=3, Product=2, SerialNumber=1 usb usb8: Product: UHCI Host Controller usb usb8: Manufacturer: Linux 2.6.30-rc6-pae uhci_hcd usb usb8: SerialNumber: 0000:00:1d.2 usb usb8: configuration #1 chosen from 1 choice hub 8-0:1.0: USB hub found hub 8-0:1.0: 2 ports detected PM: Starting manual resume from disk Monitor-Mwait will be used to enter C-3 state EXT4-fs: barriers enabled kjournald2 starting: pid 655, dev sda6:8, commit interval 5 seconds EXT4 FS on sda6, internal journal on sda6:8 EXT4-fs: delayed allocation enabled EXT4-fs: file extents enabled EXT4-fs: mballoc enabled EXT4-fs: mounted filesystem sda6 with ordered data mode EXT4 (no)acl options not supported udevd version 128 started Linux agpgart interface v0.103 agpgart-intel 0000:00:00.0: Intel Mobile Intel® GM45 Express Chipset agpgart-intel 0000:00:00.0: detected 32764K stolen memory agpgart-intel 0000:00:00.0: AGP aperture is 256M @ 0xd0000000 sd 0:0:0:0: Attached scsi generic sg0 type 0 iTCO_vendor_support: vendor-support=0 scsi 1:0:0:0: Attached scsi generic sg1 type 5 e1000e: Intel(R) PRO/1000 Network Driver - 0.3.3.4-k4 e1000e: Copyright (c) 1999-2008 Intel Corporation. ACPI: WMI: Mapper loaded e1000e 0000:00:19.0: PCI INT A -> GSI 20 (level, low) -> IRQ 20 e1000e 0000:00:19.0: setting latency timer to 64 e1000e 0000:00:19.0: irq 29 for MSI/MSI-X input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input4 ACPI: Power Button [PWRF] input: Lid Switch as /devices/LNXSYSTM:00/device:00/PNP0C0D:00/input/input5 ACPI: Lid Switch [LID] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.05 cfg80211: Using static regulatory domain info cfg80211: Regulatory domain: US (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp) (2402000 KHz - 2472000 KHz @ 40000 KHz), (600 mBi, 2700 mBm) (5170000 KHz - 5190000 KHz @ 40000 KHz), (600 mBi, 2300 mBm) (5190000 KHz - 5210000 KHz @ 40000 KHz), (600 mBi, 2300 mBm) (5210000 KHz - 5230000 KHz @ 40000 KHz), (600 mBi, 2300 mBm) (5230000 KHz - 5330000 KHz @ 40000 KHz), (600 mBi, 2300 mBm) (5735000 KHz - 5835000 KHz @ 40000 KHz), (600 mBi, 3000 mBm) iTCO_wdt: Found a ICH9M-E TCO device (Version=2, TCOBASE=0x1060) iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0) input: Sleep Button as /devices/LNXSYSTM:00/device:00/PNP0C0E:00/input/input6 ACPI: Sleep Button [SLPB] 0000:00:19.0: eth0: (PCI Express:2.5GB/s:Width x1) 00:1c:25:95:93:ec 0000:00:19.0: eth0: Intel(R) PRO/1000 Network Connection 0000:00:19.0: eth0: MAC: 7, PHY: 8, PBA No: 1008ff-0ff i801_smbus 0000:00:1f.3: PCI INT A -> GSI 23 (level, low) -> IRQ 23 Driver 'sr' needs updating - please use bus_type methods sr0: scsi3-mmc drive: 24x/24x writer dvd-ram cd/rw xa/form2 cdda tray Uniform CD-ROM driver Revision: 3.20 sr 1:0:0:0: Attached scsi CD-ROM sr0 HDA Intel 0000:00:1b.0: PCI INT B -> GSI 17 (level, low) -> IRQ 17 cfg80211: Calling CRDA for country: US HDA Intel 0000:00:1b.0: setting latency timer to 64 ACPI: AC Adapter [AC] (on-line) rtc_cmos 00:07: RTC can wake from S4 rtc_cmos 00:07: rtc core: registered rtc_cmos as rtc0 rtc0: alarms up to one month, y3k, 114 bytes nvram, hpet irqs ohci1394 0000:15:00.1: PCI INT B -> GSI 17 (level, low) -> IRQ 17 Non-volatile memory driver v1.3 input: HDA Intel Headphone as /devices/pci0000:00/0000:00:1b.0/input/input7 input: HDA Intel Mic as /devices/pci0000:00/0000:00:1b.0/input/input8 ohci1394: fw-host0: OHCI-1394 1.1 (PCI): IRQ=[17] MMIO=[f4801000-f48017ff] Max Packet=[2048] IR/IT contexts=[4/4] input: HDA Intel Mic as /devices/pci0000:00/0000:00:1b.0/input/input9 input: HDA Intel Headphone as /devices/pci0000:00/0000:00:1b.0/input/input10 ACPI: Battery Slot [BAT0] (battery present) thinkpad_acpi: ThinkPad ACPI Extras v0.23 thinkpad_acpi: http://ibm-acpi.sf.net/ thinkpad_acpi: ThinkPad BIOS 6FET70WW (3.00 ), EC 7VHT14WW-1.03 thinkpad_acpi: Lenovo ThinkPad W500, model 40622XG thinkpad_acpi: radio switch found; radios are enabled ata2.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0 ata2.00: irq_stat 0x40000001 thinkpad_acpi: This ThinkPad has standard ACPI backlight brightness control, supported by the ACPI video driver thinkpad_acpi: Disabling thinkpad-acpi brightness events by default... XXX scsi_eh_flush_done_q: online=1(2) noretry=0 retries=0 allowed=0 scsi_eh_1: flush finish cmd: f404b380 Registered led device: tpacpi::thinklight Registered led device: tpacpi::power Registered led device: tpacpi::standby thinkpad_acpi: Standard ACPI backlight interface available, not loading native one. input: ThinkPad Extra Buttons as /devices/virtual/input/input11 iwlagn: Intel(R) Wireless WiFi Link AGN driver for Linux, 1.3.27k ata2.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0 ata2.00: irq_stat 0x40000001 XXX scsi_eh_flush_done_q: online=1(2) noretry=0 retries=3 allowed=3 scsi_eh_1: flush finish cmd: f404bd40 sr 1:0:0:0: [sr0] Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE sr 1:0:0:0: [sr0] Sense Key : Illegal Request [current] ILI sr 1:0:0:0: [sr0] Add. Sense: Illegal mode for this track end_request: I/O error, dev sr0, sector 0 Buffer I/O error on device sr0, logical block 0 Buffer I/O error on device sr0, logical block 1 Buffer I/O error on device sr0, logical block 2 Buffer I/O error on device sr0, logical block 3 ata2.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0 ata2.00: irq_stat 0x40000001 XXX scsi_eh_flush_done_q: online=1(2) noretry=0 retries=3 allowed=3 scsi_eh_1: flush finish cmd: f3dfdec0 sr 1:0:0:0: [sr0] Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE sr 1:0:0:0: [sr0] Sense Key : Illegal Request [current] ILI sr 1:0:0:0: [sr0] Add. Sense: Illegal mode for this track end_request: I/O error, dev sr0, sector 0 Buffer I/O error on device sr0, logical block 0 iwlagn: Copyright(c) 2003-2009 Intel Corporation iwlagn 0000:03:00.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17 iwlagn 0000:03:00.0: setting latency timer to 64 iwlagn 0000:03:00.0: Detected Intel Wireless WiFi Link 5300AGN REV=0x24 iwlagn 0000:03:00.0: Tunable channels: 13 802.11bg, 24 802.11a channels iwlagn 0000:03:00.0: irq 30 for MSI/MSI-X ata2.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0 ata2.00: irq_stat 0x40000001 XXX scsi_eh_flush_done_q: online=1(2) noretry=0 retries=0 allowed=0 scsi_eh_1: flush finish cmd: f404bec0 ata2.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0 ata2.00: irq_stat 0x40000001 XXX scsi_eh_flush_done_q: online=1(2) noretry=0 retries=3 allowed=3 scsi_eh_1: flush finish cmd: e40769c0 sr 1:0:0:0: [sr0] Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE sr 1:0:0:0: [sr0] Sense Key : Illegal Request [current] ILI sr 1:0:0:0: [sr0] Add. Sense: Illegal mode for this track cfg80211: Regulatory domain changed to country: US (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp) (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2700 mBm) (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 1700 mBm) (5250000 KHz - 5330000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) (5490000 KHz - 5710000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 3000 mBm) end_request: I/O error, dev sr0, sector 0 Buffer I/O error on device sr0, logical block 0 Buffer I/O error on device sr0, logical block 1 Buffer I/O error on device sr0, logical block 2 Buffer I/O error on device sr0, logical block 3 ata2.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0 ata2.00: irq_stat 0x40000001 XXX scsi_eh_flush_done_q: online=1(2) noretry=0 retries=3 allowed=3 scsi_eh_1: flush finish cmd: e40769c0 sr 1:0:0:0: [sr0] Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE sr 1:0:0:0: [sr0] Sense Key : Illegal Request [current] ILI sr 1:0:0:0: [sr0] Add. Sense: Illegal mode for this track end_request: I/O error, dev sr0, sector 0 Buffer I/O error on device sr0, logical block 0 phy0: Selected rate control algorithm 'iwl-agn-rs' ieee1394: Host added: ID:BUS[0-00:1023] GUID[00016c00006a3b88] usbcore: registered new interface driver snd-usb-audio Adding 2099328k swap on /dev/sda5. Priority:-1 extents:1 across:2099328k device-mapper: uevent: version 1.0.3 device-mapper: ioctl: 4.14.0-ioctl (2008-04-23) initialised: dm-devel@redhat.com loop: module loaded kjournald starting. Commit interval 5 seconds EXT3 FS on sda7, internal journal EXT3-fs: mounted filesystem with writeback data mode. fuse init (API version 7.11) platform microcode: firmware: requesting intel-ucode/06-17-06 platform microcode: firmware: requesting intel-ucode/06-17-06 Microcode Update Driver: v2.00 <tigran@aivazian.fsnet.co.uk>, Peter Oruba NET: Registered protocol family 10 lo: Disabled Privacy Extensions ip6_tables: (C) 2000-2006 Netfilter Core Team ip_tables: (C) 2000-2006 Netfilter Core Team nf_conntrack version 0.5.0 (16384 buckets, 65536 max) CONFIG_NF_CT_ACCT is deprecated and will be removed soon. Please use nf_conntrack.acct=1 kernel paramater, acct=1 nf_conntrack module option or sysctl net.netfilter.nf_conntrack_acct=1 to enable it. e1000e 0000:00:19.0: irq 29 for MSI/MSI-X e1000e 0000:00:19.0: irq 29 for MSI/MSI-X ADDRCONF(NETDEV_UP): eth0: link is not ready iwlagn 0000:03:00.0: firmware: requesting iwlwifi-5000-1.ucode iwlagn 0000:03:00.0: loaded firmware version 5.4.1.16 Registered led device: iwl-phy0::radio Registered led device: iwl-phy0::assoc Registered led device: iwl-phy0::RX Registered led device: iwl-phy0::TX ADDRCONF(NETDEV_UP): wlan0: link is not ready NET: Registered protocol family 17 wlan0: direct probe to AP 00:1d:92:1d:1e:8e try 1 wlan0: direct probe to AP 00:1d:92:1d:1e:8e try 1 wlan0: direct probe to AP 00:1d:92:1d:1e:8e try 2 wlan0: direct probe to AP 00:1d:92:1d:1e:8e try 3 wlan0: direct probe to AP 00:1d:92:1d:1e:8e timed out wlan0: direct probe to AP 00:1d:92:1d:1e:8e try 1 wlan0: direct probe to AP 00:1d:92:1d:1e:8e try 1 wlan0: direct probe to AP 00:1d:92:1d:1e:8e try 1 wlan0: direct probe to AP 00:1d:92:1d:1e:8e try 2 wlan0: direct probe to AP 00:1d:92:1d:1e:8e try 3 wlan0: direct probe to AP 00:1d:92:1d:1e:8e timed out wlan0: direct probe to AP 00:1d:92:1d:1e:8e try 1 wlan0: direct probe to AP 00:1d:92:1d:1e:8e try 1 wlan0: direct probe to AP 00:1d:92:1d:1e:8e try 2 wlan0: direct probe to AP 00:1d:92:1d:1e:8e try 3 wlan0: direct probe to AP 00:1d:92:1d:1e:8e timed out wlan0: direct probe to AP 00:1d:92:1d:1e:8e try 1 wlan0: direct probe to AP 00:1d:92:1d:1e:8e try 1 wlan0: direct probe to AP 00:1d:92:1d:1e:8e try 1 wlan0: direct probe to AP 00:1d:92:1d:1e:8e try 2 wlan0 direct probe responded wlan0: authenticate with AP 00:1d:92:1d:1e:8e wlan0: authenticate with AP 00:1d:92:1d:1e:8e wlan0: authenticate with AP 00:1d:92:1d:1e:8e wlan0: authenticated wlan0: associate with AP 00:1d:92:1d:1e:8e wlan0: associate with AP 00:1d:92:1d:1e:8e wlan0: RX AssocResp from 00:1d:92:1d:1e:8e (capab=0x411 status=0 aid=1) wlan0: associated ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready wlan0: deauthenticated (Reason: 1) wlan0: direct probe to AP 00:1d:92:1d:1e:8e try 1 wlan0 direct probe responded wlan0: authenticate with AP 00:1d:92:1d:1e:8e wlan0: authenticate with AP 00:1d:92:1d:1e:8e wlan0: authenticated wlan0: associate with AP 00:1d:92:1d:1e:8e wlan0: RX ReassocResp from 00:1d:92:1d:1e:8e (capab=0x411 status=0 aid=1) wlan0: associated wlan0: no IPv6 routers present wlan0: deauthenticated (Reason: 1) wlan0: direct probe to AP 00:1d:92:1d:1e:8e try 1 wlan0: direct probe to AP 00:1d:92:1d:1e:8e try 2 wlan0: direct probe to AP 00:1d:92:1d:1e:8e try 3 wlan0: direct probe to AP 00:1d:92:1d:1e:8e timed out wlan0: direct probe to AP 00:1d:92:1d:1e:8e try 1 wlan0: direct probe to AP 00:1d:92:1d:1e:8e try 1 wlan0: direct probe to AP 00:1d:92:1d:1e:8e try 1 wlan0: direct probe to AP 00:1d:92:1d:1e:8e try 2 wlan0: direct probe to AP 00:1d:92:1d:1e:8e try 3 wlan0: direct probe to AP 00:1d:92:1d:1e:8e timed out wlan0: direct probe to AP 00:1d:92:1d:1e:8e try 1 wlan0: direct probe to AP 00:1d:92:1d:1e:8e try 1 wlan0: direct probe to AP 00:1d:92:1d:1e:8e try 2 wlan0: direct probe to AP 00:1d:92:1d:1e:8e try 3 wlan0 direct probe responded wlan0: authenticate with AP 00:1d:92:1d:1e:8e wlan0: authenticate with AP 00:1d:92:1d:1e:8e wlan0: authenticate with AP 00:1d:92:1d:1e:8e wlan0: authenticated wlan0: associate with AP 00:1d:92:1d:1e:8e wlan0: associate with AP 00:1d:92:1d:1e:8e wlan0: RX ReassocResp from 00:1d:92:1d:1e:8e (capab=0x411 status=0 aid=1) wlan0: associated wlan0: deauthenticated (Reason: 1) wlan0: direct probe to AP 00:1d:92:1d:1e:8e try 1 wlan0: direct probe to AP 00:1d:92:1d:1e:8e try 2 wlan0: direct probe to AP 00:1d:92:1d:1e:8e try 3 wlan0: direct probe to AP 00:1d:92:1d:1e:8e timed out [drm] Initialized drm 1.1.0 20060810 pci 0000:00:02.0: power state changed by ACPI to D0 pci 0000:00:02.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 pci 0000:00:02.0: setting latency timer to 64 pci 0000:00:02.0: irq 31 for MSI/MSI-X acpi device:03: registered as cooling_device2 input: Video Bus as /devices/LNXSYSTM:00/device:00/PNP0A08:00/device:02/input/input12 ACPI: Video Device [VID] (multi-head: yes rom: no post: no) [drm] Initialized i915 1.6.0 20080730 for 0000:00:02.0 on minor 0 ata1: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x10 CPU0 attaching NULL sched-domain. CPU1 attaching NULL sched-domain. CPU0 attaching sched-domain: domain 0: span 0-1 level MC groups: 0 1 CPU1 attaching sched-domain: domain 0: span 0-1 level MC groups: 1 0 wlan0: authenticate with AP 00:1d:92:1d:1e:8e wlan0: authenticated wlan0: associate with AP 00:1d:92:1d:1e:8e wlan0: RX AssocResp from 00:1d:92:1d:1e:8e (capab=0x411 status=0 aid=1) wlan0: associated wlan0 direct probe responded wlan0: authenticate with AP 00:1d:92:1d:1e:8e wlan0: authenticated wlan0: associate with AP 00:1d:92:1d:1e:8e wlan0: RX ReassocResp from 00:1d:92:1d:1e:8e (capab=0x411 status=0 aid=1) wlan0: associated wlan0: deauthenticated (Reason: 1) iwlagn 0000:03:00.0: index 0 not used in uCode key table. wlan0: direct probe to AP 00:1d:92:1d:1e:8e try 1 wlan0 direct probe responded wlan0: authenticate with AP 00:1d:92:1d:1e:8e wlan0: authenticated wlan0: associate with AP 00:1d:92:1d:1e:8e wlan0: RX ReassocResp from 00:1d:92:1d:1e:8e (capab=0x411 status=0 aid=1) wlan0: associated wlan0: no probe response from AP 00:1d:92:1d:1e:8e - disassociating wlan0: direct probe to AP 00:1d:92:1d:1e:8e try 1 wlan0: direct probe to AP 00:1d:92:1d:1e:8e try 2 wlan0 direct probe responded wlan0: authenticate with AP 00:1d:92:1d:1e:8e wlan0: authenticated wlan0: associate with AP 00:1d:92:1d:1e:8e wlan0: associate with AP 00:1d:92:1d:1e:8e wlan0: RX ReassocResp from 00:1d:92:1d:1e:8e (capab=0x411 status=0 aid=1) wlan0: associated wlan0: authenticate with AP 00:1d:92:1d:1e:8e wlan0: authenticate with AP 00:1d:92:1d:1e:8e wlan0: authenticated wlan0: associate with AP 00:1d:92:1d:1e:8e wlan0: RX AssocResp from 00:1d:92:1d:1e:8e (capab=0x411 status=0 aid=1) wlan0: associated wlan0: deauthenticated (Reason: 1) wlan0: direct probe to AP 00:1d:92:1d:1e:8e try 1 wlan0: direct probe to AP 00:1d:92:1d:1e:8e try 2 wlan0: direct probe to AP 00:1d:92:1d:1e:8e try 3 wlan0 direct probe responded wlan0: authenticate with AP 00:1d:92:1d:1e:8e wlan0: authenticate with AP 00:1d:92:1d:1e:8e wlan0: authenticate with AP 00:1d:92:1d:1e:8e wlan0: authenticated wlan0: associate with AP 00:1d:92:1d:1e:8e wlan0: associate with AP 00:1d:92:1d:1e:8e wlan0: RX ReassocResp from 00:1d:92:1d:1e:8e (capab=0x411 status=0 aid=1) wlan0: associated wlan0: deauthenticated (Reason: 1) wlan0: direct probe to AP 00:1d:92:1d:1e:8e try 1 wlan0 direct probe responded wlan0: authenticate with AP 00:1d:92:1d:1e:8e wlan0: authenticate with AP 00:1d:92:1d:1e:8e wlan0: authenticate with AP 00:1d:92:1d:1e:8e wlan0: authenticated wlan0: associate with AP 00:1d:92:1d:1e:8e wlan0: associate with AP 00:1d:92:1d:1e:8e wlan0: RX ReassocResp from 00:1d:92:1d:1e:8e (capab=0x411 status=0 aid=1) wlan0: associated wlan0: deauthenticated (Reason: 1) wlan0: direct probe to AP 00:1d:92:1d:1e:8e try 1 wlan0 direct probe responded wlan0: authenticate with AP 00:1d:92:1d:1e:8e wlan0: authenticate with AP 00:1d:92:1d:1e:8e wlan0: authenticate with AP 00:1d:92:1d:1e:8e wlan0: authenticated wlan0: associate with AP 00:1d:92:1d:1e:8e wlan0: associate with AP 00:1d:92:1d:1e:8e wlan0: associate with AP 00:1d:92:1d:1e:8e wlan0: RX ReassocResp from 00:1d:92:1d:1e:8e (capab=0x411 status=0 aid=1) wlan0: associated wlan0: deauthenticated (Reason: 1) wlan0: direct probe to AP 00:1d:92:1d:1e:8e try 1 wlan0: direct probe to AP 00:1d:92:1d:1e:8e try 2 wlan0: direct probe to AP 00:1d:92:1d:1e:8e try 3 wlan0 direct probe responded wlan0: authenticate with AP 00:1d:92:1d:1e:8e wlan0: authenticate with AP 00:1d:92:1d:1e:8e wlan0: authenticate with AP 00:1d:92:1d:1e:8e wlan0: authenticated wlan0: associate with AP 00:1d:92:1d:1e:8e wlan0: associate with AP 00:1d:92:1d:1e:8e wlan0: associate with AP 00:1d:92:1d:1e:8e wlan0: RX ReassocResp from 00:1d:92:1d:1e:8e (capab=0x411 status=0 aid=1) wlan0: associated wlan0: deauthenticated (Reason: 1) wlan0: direct probe to AP 00:1d:92:1d:1e:8e try 1 wlan0: direct probe to AP 00:1d:92:1d:1e:8e try 2 wlan0: direct probe to AP 00:1d:92:1d:1e:8e try 3 wlan0: direct probe to AP 00:1d:92:1d:1e:8e timed out wlan0: direct probe to AP 00:1d:92:1d:1e:8e try 1 wlan0: direct probe to AP 00:1d:92:1d:1e:8e try 1 wlan0 direct probe responded wlan0: authenticate with AP 00:1d:92:1d:1e:8e wlan0: authenticated wlan0: associate with AP 00:1d:92:1d:1e:8e wlan0: associate with AP 00:1d:92:1d:1e:8e wlan0: RX AssocResp from 00:1d:92:1d:1e:8e (capab=0x411 status=0 aid=1) wlan0: associated wlan0: deauthenticated (Reason: 1) wlan0: direct probe to AP 00:1d:92:1d:1e:8e try 1 wlan0: direct probe to AP 00:1d:92:1d:1e:8e try 2 wlan0: direct probe to AP 00:1d:92:1d:1e:8e try 3 wlan0 direct probe responded wlan0: authenticate with AP 00:1d:92:1d:1e:8e wlan0: authenticate with AP 00:1d:92:1d:1e:8e wlan0: authenticate with AP 00:1d:92:1d:1e:8e wlan0: authenticated wlan0: associate with AP 00:1d:92:1d:1e:8e wlan0: associate with AP 00:1d:92:1d:1e:8e wlan0: associate with AP 00:1d:92:1d:1e:8e wlan0: RX ReassocResp from 00:1d:92:1d:1e:8e (capab=0x411 status=0 aid=1) wlan0: associated wlan0: deauthenticated (Reason: 1) wlan0: direct probe to AP 00:1d:92:1d:1e:8e try 1 wlan0: direct probe to AP 00:1d:92:1d:1e:8e try 2 wlan0 direct probe responded wlan0: authenticate with AP 00:1d:92:1d:1e:8e wlan0: authenticate with AP 00:1d:92:1d:1e:8e wlan0: authenticated wlan0: associate with AP 00:1d:92:1d:1e:8e wlan0: RX ReassocResp from 00:1d:92:1d:1e:8e (capab=0x411 status=0 aid=1) wlan0: associated wlan0: deauthenticated (Reason: 1) wlan0: direct probe to AP 00:1d:92:1d:1e:8e try 1 wlan0: direct probe to AP 00:1d:92:1d:1e:8e try 2 wlan0: direct probe to AP 00:1d:92:1d:1e:8e try 3 wlan0 direct probe responded wlan0: authenticate with AP 00:1d:92:1d:1e:8e wlan0: authenticate with AP 00:1d:92:1d:1e:8e wlan0: authenticate with AP 00:1d:92:1d:1e:8e wlan0: authenticated wlan0: associate with AP 00:1d:92:1d:1e:8e wlan0: associate with AP 00:1d:92:1d:1e:8e wlan0: RX ReassocResp from 00:1d:92:1d:1e:8e (capab=0x411 status=0 aid=1) wlan0: associated wlan0: deauthenticated (Reason: 1) wlan0: direct probe to AP 00:1d:92:1d:1e:8e try 1 wlan0 direct probe responded wlan0: authenticate with AP 00:1d:92:1d:1e:8e wlan0: authenticate with AP 00:1d:92:1d:1e:8e wlan0: authenticate with AP 00:1d:92:1d:1e:8e wlan0: authenticated wlan0: associate with AP 00:1d:92:1d:1e:8e wlan0: associate with AP 00:1d:92:1d:1e:8e wlan0: RX ReassocResp from 00:1d:92:1d:1e:8e (capab=0x411 status=0 aid=1) wlan0: associated wlan0: deauthenticated (Reason: 1) wlan0: direct probe to AP 00:1d:92:1d:1e:8e try 1 wlan0 direct probe responded wlan0: authenticate with AP 00:1d:92:1d:1e:8e wlan0: authenticate with AP 00:1d:92:1d:1e:8e wlan0: authenticated wlan0: associate with AP 00:1d:92:1d:1e:8e wlan0: RX ReassocResp from 00:1d:92:1d:1e:8e (capab=0x411 status=0 aid=1) wlan0: associated wlan0: deauthenticated (Reason: 1) wlan0: direct probe to AP 00:1d:92:1d:1e:8e try 1 wlan0: direct probe to AP 00:1d:92:1d:1e:8e try 2 wlan0 direct probe responded wlan0: authenticate with AP 00:1d:92:1d:1e:8e wlan0: authenticated wlan0: associate with AP 00:1d:92:1d:1e:8e wlan0: associate with AP 00:1d:92:1d:1e:8e wlan0: RX ReassocResp from 00:1d:92:1d:1e:8e (capab=0x411 status=0 aid=1) wlan0: associated wlan0: deauthenticated (Reason: 1) wlan0: direct probe to AP 00:1d:92:1d:1e:8e try 1 wlan0 direct probe responded wlan0: authenticate with AP 00:1d:92:1d:1e:8e wlan0: authenticate with AP 00:1d:92:1d:1e:8e wlan0: authenticate with AP 00:1d:92:1d:1e:8e wlan0: authenticated wlan0: associate with AP 00:1d:92:1d:1e:8e wlan0: associate with AP 00:1d:92:1d:1e:8e wlan0: associate with AP 00:1d:92:1d:1e:8e wlan0: RX ReassocResp from 00:1d:92:1d:1e:8e (capab=0x411 status=0 aid=1) wlan0: associated wlan0: deauthenticated (Reason: 1) wlan0: direct probe to AP 00:1d:92:1d:1e:8e try 1 wlan0: direct probe to AP 00:1d:92:1d:1e:8e try 2 wlan0: direct probe to AP 00:1d:92:1d:1e:8e try 3 wlan0 direct probe responded wlan0: authenticate with AP 00:1d:92:1d:1e:8e wlan0: authenticate with AP 00:1d:92:1d:1e:8e wlan0: authenticate with AP 00:1d:92:1d:1e:8e wlan0: authenticated wlan0: associate with AP 00:1d:92:1d:1e:8e wlan0: associate with AP 00:1d:92:1d:1e:8e wlan0: associate with AP 00:1d:92:1d:1e:8e wlan0: RX ReassocResp from 00:1d:92:1d:1e:8e (capab=0x411 status=0 aid=1) wlan0: associated wlan0: direct probe to AP 00:1d:92:1d:1e:8e try 1 wlan0: direct probe to AP 00:1d:92:1d:1e:8e try 2 wlan0 direct probe responded wlan0: authenticate with AP 00:1d:92:1d:1e:8e wlan0: authenticate with AP 00:1d:92:1d:1e:8e wlan0: authenticate with AP 00:1d:92:1d:1e:8e wlan0: authenticated wlan0: associate with AP 00:1d:92:1d:1e:8e wlan0: associate with AP 00:1d:92:1d:1e:8e wlan0: associate with AP 00:1d:92:1d:1e:8e wlan0: RX ReassocResp from 00:1d:92:1d:1e:8e (capab=0x411 status=0 aid=1) wlan0: associated wlan0: deauthenticated (Reason: 1) wlan0: direct probe to AP 00:1d:92:1d:1e:8e try 1 wlan0: direct probe to AP 00:1d:92:1d:1e:8e try 2 wlan0: direct probe to AP 00:1d:92:1d:1e:8e try 3 wlan0 direct probe responded wlan0: authenticate with AP 00:1d:92:1d:1e:8e wlan0: authenticate with AP 00:1d:92:1d:1e:8e wlan0: authenticate with AP 00:1d:92:1d:1e:8e wlan0: authenticated wlan0: associate with AP 00:1d:92:1d:1e:8e wlan0: associate with AP 00:1d:92:1d:1e:8e wlan0: RX ReassocResp from 00:1d:92:1d:1e:8e (capab=0x411 status=0 aid=1) wlan0: associated wlan0: deauthenticated (Reason: 1) wlan0: direct probe to AP 00:1d:92:1d:1e:8e try 1 wlan0 direct probe responded wlan0: authenticate with AP 00:1d:92:1d:1e:8e wlan0: authenticate with AP 00:1d:92:1d:1e:8e wlan0: authenticate with AP 00:1d:92:1d:1e:8e wlan0: authenticated wlan0: associate with AP 00:1d:92:1d:1e:8e wlan0: associate with AP 00:1d:92:1d:1e:8e wlan0: associate with AP 00:1d:92:1d:1e:8e wlan0: RX ReassocResp from 00:1d:92:1d:1e:8e (capab=0x411 status=0 aid=1) wlan0: associated wlan0: deauthenticated (Reason: 1) wlan0: direct probe to AP 00:1d:92:1d:1e:8e try 1 wlan0: direct probe to AP 00:1d:92:1d:1e:8e try 2 wlan0: direct probe to AP 00:1d:92:1d:1e:8e try 3 wlan0: direct probe to AP 00:1d:92:1d:1e:8e timed out wlan0: direct probe to AP 00:1d:92:1d:1e:8e try 1 wlan0: direct probe to AP 00:1d:92:1d:1e:8e try 2 wlan0: direct probe to AP 00:1d:92:1d:1e:8e try 3 wlan0 direct probe responded wlan0: authenticate with AP 00:1d:92:1d:1e:8e wlan0: authenticate with AP 00:1d:92:1d:1e:8e wlan0: authenticated wlan0: associate with AP 00:1d:92:1d:1e:8e wlan0: RX ReassocResp from 00:1d:92:1d:1e:8e (capab=0x411 status=0 aid=1) wlan0: associated wlan0: deauthenticated (Reason: 1) wlan0: direct probe to AP 00:1d:92:1d:1e:8e try 1 wlan0: direct probe to AP 00:1d:92:1d:1e:8e try 2 wlan0: direct probe to AP 00:1d:92:1d:1e:8e try 3 wlan0 direct probe responded wlan0: authenticate with AP 00:1d:92:1d:1e:8e wlan0: authenticate with AP 00:1d:92:1d:1e:8e wlan0: authenticate with AP 00:1d:92:1d:1e:8e wlan0: authenticated wlan0: associate with AP 00:1d:92:1d:1e:8e wlan0: associate with AP 00:1d:92:1d:1e:8e wlan0: associate with AP 00:1d:92:1d:1e:8e wlan0: RX ReassocResp from 00:1d:92:1d:1e:8e (capab=0x411 status=0 aid=1) wlan0: associated wlan0: deauthenticated (Reason: 1) wlan0: direct probe to AP 00:1d:92:1d:1e:8e try 1 wlan0 direct probe responded wlan0: authenticate with AP 00:1d:92:1d:1e:8e wlan0: authenticated wlan0: associate with AP 00:1d:92:1d:1e:8e wlan0: associate with AP 00:1d:92:1d:1e:8e wlan0: RX ReassocResp from 00:1d:92:1d:1e:8e (capab=0x411 status=0 aid=1) wlan0: associated wlan0: deauthenticated (Reason: 1) wlan0: direct probe to AP 00:1d:92:1d:1e:8e try 1 wlan0 direct probe responded wlan0: authenticate with AP 00:1d:92:1d:1e:8e wlan0: authenticate with AP 00:1d:92:1d:1e:8e wlan0: authenticated wlan0: associate with AP 00:1d:92:1d:1e:8e wlan0: RX ReassocResp from 00:1d:92:1d:1e:8e (capab=0x411 status=0 aid=1) wlan0: associated wlan0: deauthenticated (Reason: 1) wlan0: direct probe to AP 00:1d:92:1d:1e:8e try 1 wlan0: direct probe to AP 00:1d:92:1d:1e:8e try 2 wlan0 direct probe responded wlan0: authenticate with AP 00:1d:92:1d:1e:8e wlan0: authenticate with AP 00:1d:92:1d:1e:8e wlan0: authenticate with AP 00:1d:92:1d:1e:8e wlan0: authenticated wlan0: associate with AP 00:1d:92:1d:1e:8e wlan0: RX ReassocResp from 00:1d:92:1d:1e:8e (capab=0x411 status=0 aid=1) wlan0: associated wlan0: no probe response from AP 00:1d:92:1d:1e:8e - disassociating wlan0: direct probe to AP 00:1d:92:1d:1e:8e try 1 wlan0 direct probe responded wlan0: authenticate with AP 00:1d:92:1d:1e:8e wlan0: authenticate with AP 00:1d:92:1d:1e:8e wlan0: authenticate with AP 00:1d:92:1d:1e:8e wlan0: authenticated wlan0: associate with AP 00:1d:92:1d:1e:8e wlan0: associate with AP 00:1d:92:1d:1e:8e wlan0: associate with AP 00:1d:92:1d:1e:8e wlan0: RX ReassocResp from 00:1d:92:1d:1e:8e (capab=0x411 status=0 aid=1) wlan0: associated wlan0: deauthenticated (Reason: 1) wlan0: direct probe to AP 00:1d:92:1d:1e:8e try 1 wlan0: direct probe to AP 00:1d:92:1d:1e:8e try 2 wlan0: direct probe to AP 00:1d:92:1d:1e:8e try 3 wlan0: direct probe to AP 00:1d:92:1d:1e:8e timed out wlan0: direct probe to AP 00:1d:92:1d:1e:8e try 1 wlan0: direct probe to AP 00:1d:92:1d:1e:8e try 2 wlan0 direct probe responded wlan0: authenticate with AP 00:1d:92:1d:1e:8e wlan0: authenticated wlan0: associate with AP 00:1d:92:1d:1e:8e wlan0: associate with AP 00:1d:92:1d:1e:8e wlan0: associate with AP 00:1d:92:1d:1e:8e wlan0: RX ReassocResp from 00:1d:92:1d:1e:8e (capab=0x411 status=0 aid=1) wlan0: associated wlan0: no probe response from AP 00:1d:92:1d:1e:8e - disassociating wlan0: direct probe to AP 00:1d:92:1d:1e:8e try 1 wlan0: direct probe to AP 00:1d:92:1d:1e:8e try 2 wlan0: direct probe to AP 00:1d:92:1d:1e:8e try 3 wlan0 direct probe responded wlan0: authenticate with AP 00:1d:92:1d:1e:8e wlan0: authenticate with AP 00:1d:92:1d:1e:8e wlan0: authenticate with AP 00:1d:92:1d:1e:8e wlan0: authenticated wlan0: associate with AP 00:1d:92:1d:1e:8e wlan0: associate with AP 00:1d:92:1d:1e:8e wlan0: associate with AP 00:1d:92:1d:1e:8e wlan0: RX ReassocResp from 00:1d:92:1d:1e:8e (capab=0x411 status=0 aid=1) wlan0: associated wlan0: disassociating by local choice (reason=3) wlan0: deauthenticated (Reason: 1) wlan0: direct probe to AP 00:1d:92:1d:1e:8e try 1 wlan0: direct probe to AP 00:1d:92:1d:1e:8e try 2 wlan0 direct probe responded wlan0: authenticate with AP 00:1d:92:1d:1e:8e wlan0: authenticate with AP 00:1d:92:1d:1e:8e wlan0: authenticated wlan0: associate with AP 00:1d:92:1d:1e:8e wlan0: RX ReassocResp from 00:1d:92:1d:1e:8e (capab=0x411 status=0 aid=1) wlan0: associated wlan0: no probe response from AP 00:1d:92:1d:1e:8e - disassociating wlan0: direct probe to AP 00:1d:92:1d:1e:8e try 1 wlan0 direct probe responded wlan0: authenticate with AP 00:1d:92:1d:1e:8e wlan0: authenticate with AP 00:1d:92:1d:1e:8e wlan0: authenticate with AP 00:1d:92:1d:1e:8e wlan0: authenticated wlan0: associate with AP 00:1d:92:1d:1e:8e wlan0: associate with AP 00:1d:92:1d:1e:8e wlan0: associate with AP 00:1d:92:1d:1e:8e wlan0: RX ReassocResp from 00:1d:92:1d:1e:8e (capab=0x411 status=0 aid=1) wlan0: associated wlan0: deauthenticated (Reason: 1) wlan0: direct probe to AP 00:1d:92:1d:1e:8e try 1 wlan0 direct probe responded wlan0: authenticate with AP 00:1d:92:1d:1e:8e wlan0: authenticated wlan0: associate with AP 00:1d:92:1d:1e:8e wlan0: RX ReassocResp from 00:1d:92:1d:1e:8e (capab=0x411 status=0 aid=1) wlan0: associated wlan0: disassociating by local choice (reason=3) wlan0: direct probe to AP 00:1d:92:1d:1e:8e try 1 wlan0 direct probe responded wlan0: authenticate with AP 00:1d:92:1d:1e:8e wlan0: authenticated wlan0: associate with AP 00:1d:92:1d:1e:8e wlan0: RX ReassocResp from 00:1d:92:1d:1e:8e (capab=0x411 status=0 aid=1) wlan0: associated SFW2-OUT-ERROR IN= OUT=wlan0 SRC=192.168.1.101 DST=202.177.16.121 LEN=58 TOS=0x00 PREC=0x00 TTL=64 ID=53182 DF PROTO=TCP SPT=33810 DPT=119 WINDOW=360 RES=0x00 ACK PSH FIN URGP=0 OPT (0101080A000604909F61AC39) SFW2-OUT-ERROR IN= OUT=wlan0 SRC=192.168.1.101 DST=202.177.16.121 LEN=58 TOS=0x00 PREC=0x00 TTL=64 ID=53183 DF PROTO=TCP SPT=33810 DPT=119 WINDOW=360 RES=0x00 ACK PSH FIN URGP=0 OPT (0101080A00065C509F61AC39) ^ permalink raw reply [flat|nested] 9+ messages in thread
* Re: BUG: blank screen - unless keyboard/synaptic combo 2009-05-25 6:35 ` Niel Lambrechts @ 2009-06-01 5:08 ` Niel Lambrechts 0 siblings, 0 replies; 9+ messages in thread From: Niel Lambrechts @ 2009-06-01 5:08 UTC (permalink / raw) To: Zhang Rui; +Cc: linux-pci@vger.kernel.org, linux-acpi@vger.kernel.org Niel Lambrechts wrote: >>>>> c's added, attached lspci output. >>>>> >>>>> On 05/19/2009 08:38 PM, Niel Lambrechts wrote: >>>>> >>>>> >>>>>> I have a strange problem in that during a resume from hibernate my >>>>>> text console (or X) remains blank - that is, until I simultaneously >>>>>> press a keyboard key and touch the synaptic pad. It is not >>>>>> sufficient >>>>>> to press just one or the other, it needs to be done >>>>>> simultaneously and >>>>>> it resumes fine after doing this. >>>>>> >>>>>> >>>> is this a regression or it exists on all the kernel you've tried? >>>> >>>> >>> Hi Zhang, >>> >>> It is not a recent regression, all of the kernels I tried back to >>> 2.6.28 >>> shows the same problem. The test results I posted last night was with >>> 2.6.30-rc6. I suspect it did not happen in 2.6.27, but I might be wrong >>> since I could not bisect that far back (I am using EXT4 and have too >>> many issues to bisect that far back). >>> >>> >>>> please remote login the box after resume, and get the output of >>>> "xrandr --verbose". >>>> >>>> >>> When I resume from suspend to RAM there is no problem. >>> >>> When I resume from hibernate, my laptop actually remains unusable until >>> I do the combination of things I mentioned. I cannot log in from remote >>> or even ping the laptop, except if I first press the mentioned key >>> combo. Before this, the display is either entirely blank or sometimes >>> there is a white cursor in the top left corner. >>> >>> The blank screen happens in runlevel 3 without X or "i915" loaded - I'm >>> not sure but I suppose you want the "xrandr" output for another reason. >>> It is interesting that it happens regardless of whether I am using >>> Intel >>> integrated graphics or Mobility Radeon HD 3650 (my laptop has both >>> and I >>> can enable one at a time). I boot the system with vga=791 and it is >>> using vesafb for console. >>> >>> I attached the output you asked for below after hibernating an Xorg >>> session, but this is from just after pressing the combo as I could not >>> log in over the network with the laptop in the blank state. >>> >>> Thanks, >>> Niel Hi, I've noticed that the screen only remains blank when I specify vga=xxx (I normally use vga=791) as a boot option, in other words when using vesafb. The blank screen on resume after hibernate consistently does not happen if I boot without it, and I tested with kernels from 2.6.28. Any idea who can help with this? Regards, Niel ^ permalink raw reply [flat|nested] 9+ messages in thread
* Re: BUG: blank screen - unless keyboard/synaptic combo 2009-05-22 3:39 ` Zhang Rui 2009-05-22 18:12 ` Niel Lambrechts @ 2009-05-22 18:18 ` Niel Lambrechts 1 sibling, 0 replies; 9+ messages in thread From: Niel Lambrechts @ 2009-05-22 18:18 UTC (permalink / raw) To: linux.kernel (fixed top posting) On 05/22/2009 05:39 AM, Zhang Rui wrote: > On Fri, 2009-05-22 at 06:58 +0800, Niel Lambrechts wrote: > >> Cc's added, attached lspci output. >> >> On 05/19/2009 08:38 PM, Niel Lambrechts wrote: >> >>> I have a strange problem in that during a resume from hibernate my >>> text console (or X) remains blank - that is, until I simultaneously >>> press a keyboard key and touch the synaptic pad. It is not sufficient >>> to press just one or the other, it needs to be done simultaneously and >>> it resumes fine after doing this. >>> > is this a regression or it exists on all the kernel you've tried? > Hi Zhang, It is not a recent regression, all of the kernels I tried back to 2.6.28 shows the same problem. The test results I posted last night was with 2.6.30-rc6. I suspect it did not happen in 2.6.27, but I might be wrong since I could not bisect that far back (I am using EXT4 and have too many issues to bisect that far back). > please remote login the box after resume, and get the output of > "xrandr --verbose". > When I resume from suspend to RAM there is no problem. When I resume from hibernate, my laptop actually remains unusable until I do the combination of things I mentioned. I cannot log in from remote or even ping the laptop, except if I first press the mentioned key combo. Before this, the display is either entirely blank or sometimes there is a white cursor in the top left corner. The blank screen happens in runlevel 3 without X or "i915" loaded - I'm not sure but I suppose you want the "xrandr" output for another reason. It is interesting that it happens regardless of whether I am using Intel integrated graphics or Mobility Radeon HD 3650 (my laptop has both and I can enable one at a time). I boot the system with vga=791 and it is using vesafb for console. I attached the output you asked for below after hibernating an Xorg session, but this is from just after pressing the combo as I could not log in over the network with the laptop in the blank state. Thanks, Niel niella@linux-7vph:> xrandr --verbose Screen 0: minimum 320 x 200, current 1600 x 1024, maximum 3840 x 1200 VGA disconnected 1600x1024+0+0 (0x3d) normal (normal left inverted right x axis y axis) 0mm x 0mm Identifier: 0x3b Timestamp: 184631 Subpixel: unknown Clones: CRTC: 0 CRTCs: 0 1 Transform: 1.000000 0.000000 0.000000 0.000000 1.000000 0.000000 0.000000 0.000000 1.000000 filter: 1600x1024 (0x3d) 136.4MHz *current h: width 1600 start 1704 end 1872 total 2144 skew 0 clock 63.6KHz v: height 1024 start 1025 end 1028 total 1060 clock 60.0Hz LVDS connected 1600x1024+0+0 (0x3d) normal (normal left inverted right x axis y axis) 331mm x 207mm Identifier: 0x3c Timestamp: 184631 Subpixel: horizontal rgb Clones: CRTC: 1 CRTCs: 1 Transform: 1.000000 0.000000 0.000000 0.000000 1.000000 0.000000 0.000000 0.000000 1.000000 filter: EDID_DATA: 00ffffffffffff0030ae554000000000 0011010380211578ea87f594574f8c27 27505400000001010101010101010101 0101010101018c41807a71b011403020 33004bcf100000197434802071b01440 302026004bcf100000190000000f00d1 0a32d10a281101004ca35532000000fe 004c544e31353455322d4c30350a0011 PANEL_FITTING: full_aspect supported: center full_aspect full BACKLIGHT_CONTROL: combination supported: native legacy combination kernel BACKLIGHT: 4722 (0x00001272) range: (0,4722) 1600x1024 (0x3d) 136.4MHz *current +preferred h: width 1600 start 1704 end 1872 total 2144 skew 0 clock 63.6KHz v: height 1024 start 1025 end 1028 total 1060 clock 60.0Hz 1920x1200 (0x3e) 167.8MHz -HSync -VSync +preferred h: width 1920 start 1968 end 2000 total 2298 skew 0 clock 73.0KHz v: height 1200 start 1203 end 1206 total 1217 clock 60.0Hz 1920x1200 (0x3f) 134.3MHz -HSync -VSync h: width 1920 start 1968 end 2000 total 2208 skew 0 clock 60.8KHz v: height 1200 start 1202 end 1208 total 1220 clock 49.8Hz 1600x1200 (0x40) 162.0MHz +HSync +VSync h: width 1600 start 1664 end 1856 total 2160 skew 0 clock 75.0KHz v: height 1200 start 1201 end 1204 total 1250 clock 60.0Hz 1400x1050 (0x41) 122.0MHz +HSync +VSync h: width 1400 start 1488 end 1640 total 1880 skew 0 clock 64.9KHz v: height 1050 start 1052 end 1064 total 1082 clock 60.0Hz 1280x1024 (0x42) 108.0MHz +HSync +VSync h: width 1280 start 1328 end 1440 total 1688 skew 0 clock 64.0KHz v: height 1024 start 1025 end 1028 total 1066 clock 60.0Hz 1280x960 (0x43) 108.0MHz +HSync +VSync h: width 1280 start 1376 end 1488 total 1800 skew 0 clock 60.0KHz v: height 960 start 961 end 964 total 1000 clock 60.0Hz 1024x768 (0x44) 65.0MHz -HSync -VSync h: width 1024 start 1048 end 1184 total 1344 skew 0 clock 48.4KHz v: height 768 start 771 end 777 total 806 clock 60.0Hz 800x600 (0x45) 40.0MHz +HSync +VSync h: width 800 start 840 end 968 total 1056 skew 0 clock 37.9KHz v: height 600 start 601 end 605 total 628 clock 60.3Hz 800x600 (0x46) 36.0MHz +HSync +VSync h: width 800 start 824 end 896 total 1024 skew 0 clock 35.2KHz v: height 600 start 601 end 603 total 625 clock 56.2Hz 640x480 (0x47) 25.2MHz -HSync -VSync h: width 640 start 656 end 752 total 800 skew 0 clock 31.5KHz v: height 480 start 490 end 492 total 525 clock 59.9Hz ^ permalink raw reply [flat|nested] 9+ messages in thread
end of thread, other threads:[~2009-06-01 5:08 UTC | newest] Thread overview: 9+ messages (download: mbox.gz follow: Atom feed -- links below jump to the message on this page -- 2009-05-19 18:38 BUG: blank screen - unless keyboard/synaptic combo Niel Lambrechts 2009-05-21 22:40 ` Niel Lambrechts 2009-05-21 22:58 ` Niel Lambrechts 2009-05-22 3:39 ` Zhang Rui 2009-05-22 18:12 ` Niel Lambrechts 2009-05-25 5:58 ` Zhang Rui 2009-05-25 6:35 ` Niel Lambrechts 2009-06-01 5:08 ` Niel Lambrechts 2009-05-22 18:18 ` Niel Lambrechts
This is an external index of several public inboxes, see mirroring instructions on how to clone and mirror all data and code used by this external index.