* Pending ath9k bugs
@ 2009-06-01 18:41 ` Luis R. Rodriguez
0 siblings, 0 replies; 10+ messages in thread
From: Luis R. Rodriguez @ 2009-06-01 18:41 UTC (permalink / raw)
To: linux-wireless
Cc: linville, Gaurav.Jauhar, senthilkumar, ath9k-devel,
leann.ogasawara, tim.gardner, parag.warudkar, drago01, drjoms,
jirislaby, debaditya, arxs, michal, fabian.deutsch
Here is a list of pending ath9k bugs, if I've missed
anything please reply to this e-mail and let us know. If you
have any insights into specific AP issues (one with Airport
Express N, another with DAP-1353) please let us know.
kernel.org:
1) "Very low signal strenghts with ath9k in 2.6.29"
http://bugzilla.kernel.org/show_bug.cgi?id=12930
Patch available but user still reports issues with both Windows and Linux
with an AR5416 PCI-E card. Patch has not yet been pushed upstream.
2) "AR5008/DWA-552 - Very slow" on 2.6.30-rc2
http://bugzilla.kernel.org/show_bug.cgi?id=13141
Card is an AR5416 card (PCI-E), AP is "Airport Express N" in 11 mode
with WPA. Claims under windows performance is better. User is testing
with kerenl 2.6.30-rc2.
ath9k-devel:
1) Cannot associate with AP DAP-1353 in 11n mode, no encryption.
First message:
https://lists.ath9k.org/pipermail/ath9k-devel/2009-May/001566.html
Thread:
https://lists.ath9k.org/pipermail/ath9k-devel/2009-May/thread.html#1566
Red Hat Bugzilla:
1) " [ath9k] not able to use WLAN on channel 13 with AR5008 [168c:0024] [NEEDINFO]"
https://bugzilla.redhat.com/show_bug.cgi?id=503285
2) "ath9k - bit rate is always reported as 1 Mb/s [NEEDINFO]"
https://bugzilla.redhat.com/show_bug.cgi?id=481259
3) " ath9k can not connect to hidden networks [NEEDINFO]"
https://bugzilla.redhat.com/show_bug.cgi?id=496505
This is against a "linksys wpa54g" with WPA2
4) "NetworkManager requires ath9k reload to work. [NEEDINFO]"
https://bugzilla.redhat.com/show_bug.cgi?id=489216
OpenSuse:
1) "wi-fi card Atheros AR928X returns "no scan results""
https://bugzilla.novell.com/show_bug.cgi?id=462673
Not sure what to make of this. Jiri might know better.
I reviewed most ath9k Ubuntu bug reports but unfortunately all are
on old stable kernel releases or old kernels, most need more info,
and I was unable to find any useful bug report which reflects the
current ath9k as is upstream or any critical fix for older stable
kernel releases. If I missed anything please do let us know.
Luis
^ permalink raw reply [flat|nested] 10+ messages in thread
* [ath9k-devel] Pending ath9k bugs
2009-06-01 18:41 ` Luis R. Rodriguez
@ 2009-06-01 18:48 ` Luis R. Rodriguez
-1 siblings, 0 replies; 10+ messages in thread
From: Luis R. Rodriguez @ 2009-06-01 18:48 UTC (permalink / raw)
To: ath9k-devel
On Mon, Jun 1, 2009 at 11:41 AM, Luis R. Rodriguez
<lrodriguez@atheros.com> wrote:
> Red Hat Bugzilla:
> 3) " ath9k can not connect to hidden networks ? [NEEDINFO]"
> ? ? ? ?https://bugzilla.redhat.com/show_bug.cgi?id=496505
> ? ? ? ?This is against a "linksys wpa54g" with WPA2
User just noted this was fixed in "Fedora 11 pre-release".
Luis
^ permalink raw reply [flat|nested] 10+ messages in thread
* Re: [ath9k-devel] Pending ath9k bugs
@ 2009-06-01 18:48 ` Luis R. Rodriguez
0 siblings, 0 replies; 10+ messages in thread
From: Luis R. Rodriguez @ 2009-06-01 18:48 UTC (permalink / raw)
To: linux-wireless
Cc: parag.warudkar, Gaurav.Jauhar, fabian.deutsch, arxs, linville,
debaditya, senthilkumar, drago01, ath9k-devel, michal,
leann.ogasawara, tim.gardner, jirislaby
On Mon, Jun 1, 2009 at 11:41 AM, Luis R. Rodriguez
<lrodriguez@atheros.com> wrote:
> Red Hat Bugzilla:
> 3) " ath9k can not connect to hidden networks [NEEDINFO]"
> https://bugzilla.redhat.com/show_bug.cgi?id=496505
> This is against a "linksys wpa54g" with WPA2
User just noted this was fixed in "Fedora 11 pre-release".
Luis
^ permalink raw reply [flat|nested] 10+ messages in thread
* [ath9k-devel] Pending ath9k bugs
2009-06-01 18:41 ` Luis R. Rodriguez
@ 2009-06-01 19:30 ` Jiri Slaby
-1 siblings, 0 replies; 10+ messages in thread
From: Jiri Slaby @ 2009-06-01 19:30 UTC (permalink / raw)
To: ath9k-devel
On 06/01/2009 08:41 PM, Luis R. Rodriguez wrote:
> Red Hat Bugzilla:
...
> 4) "NetworkManager requires ath9k reload to work. [NEEDINFO]"
> https://bugzilla.redhat.com/show_bug.cgi?id=489216
>
> OpenSuse:
>
> 1) "wi-fi card Atheros AR928X returns "no scan results""
> https://bugzilla.novell.com/show_bug.cgi?id=462673
> Not sure what to make of this. Jiri might know better.
As far as I can tell, it's unrelated to the kernel. It's NM or a user
setting what is to blame here. And maybe it's related to the RH entry above?
^ permalink raw reply [flat|nested] 10+ messages in thread
* Re: Pending ath9k bugs
@ 2009-06-01 19:30 ` Jiri Slaby
0 siblings, 0 replies; 10+ messages in thread
From: Jiri Slaby @ 2009-06-01 19:30 UTC (permalink / raw)
To: Luis R. Rodriguez
Cc: linux-wireless, linville, Gaurav.Jauhar, senthilkumar,
ath9k-devel, leann.ogasawara, tim.gardner, parag.warudkar,
drago01, drjoms, debaditya, arxs, michal, fabian.deutsch
On 06/01/2009 08:41 PM, Luis R. Rodriguez wrote:
> Red Hat Bugzilla:
...
> 4) "NetworkManager requires ath9k reload to work. [NEEDINFO]"
> https://bugzilla.redhat.com/show_bug.cgi?id=489216
>
> OpenSuse:
>
> 1) "wi-fi card Atheros AR928X returns "no scan results""
> https://bugzilla.novell.com/show_bug.cgi?id=462673
> Not sure what to make of this. Jiri might know better.
As far as I can tell, it's unrelated to the kernel. It's NM or a user
setting what is to blame here. And maybe it's related to the RH entry above?
^ permalink raw reply [flat|nested] 10+ messages in thread
* [ath9k-devel] Pending ath9k bugs
2009-06-01 18:41 ` Luis R. Rodriguez
@ 2009-06-01 19:52 ` Luis R. Rodriguez
-1 siblings, 0 replies; 10+ messages in thread
From: Luis R. Rodriguez @ 2009-06-01 19:52 UTC (permalink / raw)
To: ath9k-devel
On Mon, Jun 1, 2009 at 11:41 AM, Luis R. Rodriguez
<lrodriguez@atheros.com> wrote:
> ath9k-devel:
I just remembered of another issue:
BUG_ON in rc.c when using 11n. This could be caused by an incorrect
assumption in ath9k that the rc priv is correctly for the target rate.
The issue may be seen when trying to associate and changing between
legacy and HT rates on SMP systems when mac80211 passes frames on
different queues due to multiqueue support. If that is indeed the
reason for the issue we will probably need locking on the rc priv or
simply to revamp it. I'll send a patch for now to downgrade the BUG_ON
but we do need a proper fix for this, it just needs more careful
review.
While on the topic I should mention a welcomed change would be to
actually revamp ath9k RC to fix it to correctly report MCS rates to
mac80211. Then add MCS support for minstrel, and finally allow ath9k
to make use of minstrel as an optional rate control algo. If anyone is
up for the task please say so :)
Luis
^ permalink raw reply [flat|nested] 10+ messages in thread
* Re: [ath9k-devel] Pending ath9k bugs
@ 2009-06-01 19:52 ` Luis R. Rodriguez
0 siblings, 0 replies; 10+ messages in thread
From: Luis R. Rodriguez @ 2009-06-01 19:52 UTC (permalink / raw)
To: linux-wireless
Cc: parag.warudkar, Gaurav.Jauhar, fabian.deutsch, arxs, linville,
debaditya, senthilkumar, drago01, ath9k-devel, michal,
leann.ogasawara, tim.gardner, jirislaby
On Mon, Jun 1, 2009 at 11:41 AM, Luis R. Rodriguez
<lrodriguez@atheros.com> wrote:
> ath9k-devel:
I just remembered of another issue:
BUG_ON in rc.c when using 11n. This could be caused by an incorrect
assumption in ath9k that the rc priv is correctly for the target rate.
The issue may be seen when trying to associate and changing between
legacy and HT rates on SMP systems when mac80211 passes frames on
different queues due to multiqueue support. If that is indeed the
reason for the issue we will probably need locking on the rc priv or
simply to revamp it. I'll send a patch for now to downgrade the BUG_ON
but we do need a proper fix for this, it just needs more careful
review.
While on the topic I should mention a welcomed change would be to
actually revamp ath9k RC to fix it to correctly report MCS rates to
mac80211. Then add MCS support for minstrel, and finally allow ath9k
to make use of minstrel as an optional rate control algo. If anyone is
up for the task please say so :)
Luis
^ permalink raw reply [flat|nested] 10+ messages in thread
* [ath9k-devel] Pending ath9k bugs
2009-06-01 19:52 ` Luis R. Rodriguez
@ 2009-06-02 5:09 ` Vasanthakumar Thiagarajan
-1 siblings, 0 replies; 10+ messages in thread
From: Vasanthakumar Thiagarajan @ 2009-06-02 5:09 UTC (permalink / raw)
To: ath9k-devel
> BUG_ON in rc.c when using 11n. This could be caused by an incorrect
> assumption in ath9k that the rc priv is correctly for the target rate.
> The issue may be seen when trying to associate and changing between
> legacy and HT rates on SMP systems when mac80211 passes frames on
> different queues due to multiqueue support. If that is indeed the
> reason for the issue we will probably need locking on the rc priv or
> simply to revamp it. I'll send a patch for now to downgrade the BUG_ON
> but we do need a proper fix for this, it just needs more careful
> review.
I agree that rc priv needs proper locking, but I dont think this
particular issue is related to some race in rc priv. As I already
mentioned in one of the mails related to this problem, the root
cause can be a failure in channel set, have we confirmed that?.
I tried to reproduce this on my setup but no luck.
>
> While on the topic I should mention a welcomed change would be to
> actually revamp ath9k RC to fix it to correctly report MCS rates to
> mac80211.
This needs complete rewrite of ath9k rate control alg.
Vasanth
^ permalink raw reply [flat|nested] 10+ messages in thread
* Re: [ath9k-devel] Pending ath9k bugs
@ 2009-06-02 5:09 ` Vasanthakumar Thiagarajan
0 siblings, 0 replies; 10+ messages in thread
From: Vasanthakumar Thiagarajan @ 2009-06-02 5:09 UTC (permalink / raw)
To: Luis Rodriguez
Cc: linux-wireless@vger.kernel.org, parag.warudkar@gmail.com,
Gaurav Jauhar, fabian.deutsch@gmx.de, arxs@fedoraproject.org,
linville@tuxdriver.com, debaditya@gmail.com,
Senthilkumar Balasubramanian, drago01@gmail.com,
ath9k-devel@lists.ath9k.org, michal@harddata.com,
leann.ogasawara@canonical.com, tim.gardner@canonical.com,
jirislaby@gmail.com
> BUG_ON in rc.c when using 11n. This could be caused by an incorrect
> assumption in ath9k that the rc priv is correctly for the target rate.
> The issue may be seen when trying to associate and changing between
> legacy and HT rates on SMP systems when mac80211 passes frames on
> different queues due to multiqueue support. If that is indeed the
> reason for the issue we will probably need locking on the rc priv or
> simply to revamp it. I'll send a patch for now to downgrade the BUG_ON
> but we do need a proper fix for this, it just needs more careful
> review.
I agree that rc priv needs proper locking, but I dont think this
particular issue is related to some race in rc priv. As I already
mentioned in one of the mails related to this problem, the root
cause can be a failure in channel set, have we confirmed that?.
I tried to reproduce this on my setup but no luck.
>
> While on the topic I should mention a welcomed change would be to
> actually revamp ath9k RC to fix it to correctly report MCS rates to
> mac80211.
This needs complete rewrite of ath9k rate control alg.
Vasanth
^ permalink raw reply [flat|nested] 10+ messages in thread