From: Jarek Poplawski <jarkao2@gmail.com>
To: Patrick McHardy <kaber@trash.net>
Cc: Antonio Almeida <vexwek@gmail.com>,
Stephen Hemminger <shemminger@vyatta.com>,
netdev@vger.kernel.org, davem@davemloft.net, devik@cdi.cz,
Eric Dumazet <dada1@cosmosbay.com>,
Vladimir Ivashchenko <hazard@francoudi.com>
Subject: Re: [PATCH iproute2] Re: HTB accuracy for high speed
Date: Tue, 02 Jun 2009 23:50:42 +0200 [thread overview]
Message-ID: <4A259EB2.5010500@gmail.com> (raw)
In-Reply-To: <20090602213723.GB2850@ami.dom.local>
Jarek Poplawski wrote, On 06/02/2009 11:37 PM:
...
> I described the reasoning here:
> http://permalink.gmane.org/gmane.linux.network/128189
The link is stuck now, so here is a quote:
Jarek Poplawski wrote, On 05/17/2009 10:15 PM:
> Here is some additional explanation. It looks like these rates above
> 500Mbit hit the design limits of packet scheduling. Currently used
> internal resolution PSCHED_TICKS_PER_SEC is 1,000,000. 550Mbit rate
> with 800byte packets means 550M/8/800 = 85938 packets/s, so on average
> 1000000/85938 = 11.6 ticks per packet. Accounting only 11 ticks means
> we leave 0.6*85938 = 51563 ticks per second, letting for additional
> sending of 51563/11 = 4687 packets/s or 4687*800*8 = 30Mbit. Of course
> it could be worse (0.9 tick/packet lost) depending on packet sizes vs.
> rates, and the effect rises for higher rates.
Jarek P.
next prev parent reply other threads:[~2009-06-02 21:50 UTC|newest]
Thread overview: 104+ messages / expand[flat|nested] mbox.gz Atom feed top
[not found] <298f5c050905150745p13dc226eia1ff50ffa8c4b300@mail.gmail.com>
2009-05-15 14:49 ` HTB accuracy for high speed Antonio Almeida
2009-05-15 18:12 ` Stephen Hemminger
2009-05-18 10:01 ` Antonio Almeida
2009-05-18 10:45 ` Jarek Poplawski
2009-05-18 12:27 ` Antonio Almeida
2009-05-18 12:32 ` Jarek Poplawski
2009-05-18 16:13 ` Stephen Hemminger
2009-05-18 18:03 ` Antonio Almeida
2009-05-18 22:02 ` Stephen Hemminger
2009-05-19 11:48 ` Antonio Almeida
2009-05-19 13:08 ` Antonio Almeida
2009-05-16 8:31 ` Jarek Poplawski
2009-05-18 10:39 ` Antonio Almeida
2009-05-18 11:14 ` Jarek Poplawski
2009-05-18 12:05 ` Antonio Almeida
2009-05-16 14:14 ` Jarek Poplawski
2009-05-18 14:36 ` Antonio Almeida
2009-05-18 23:14 ` Vladimir Ivashchenko
2009-05-18 23:27 ` Vladimir Ivashchenko
2009-05-19 11:03 ` Jarek Poplawski
2009-05-19 14:04 ` Vladimir Ivashchenko
2009-05-19 20:10 ` Jarek Poplawski
2009-05-20 22:07 ` Vladimir Ivashchenko
2009-05-20 22:46 ` Eric Dumazet
2009-05-21 7:20 ` Jarek Poplawski
2009-05-21 7:44 ` Vladimir Ivashchenko
2009-05-21 8:28 ` Jarek Poplawski
2009-05-21 9:07 ` Eric Dumazet
2009-05-21 9:22 ` Jarek Poplawski
2009-05-23 10:37 ` HTB accuracy for high speed (and bonding) Vladimir Ivashchenko
2009-05-23 14:34 ` Jarek Poplawski
2009-05-23 15:06 ` Vladimir Ivashchenko
2009-05-23 15:35 ` Jarek Poplawski
2009-05-23 15:53 ` Vladimir Ivashchenko
2009-05-23 16:02 ` Jarek Poplawski
2009-05-18 16:40 ` HTB accuracy for high speed Eric Dumazet
2009-05-18 17:23 ` Jarek Poplawski
2009-05-18 21:52 ` David Miller
2009-05-18 23:59 ` [PATCH] pkt_sched: gen_estimator: use 64 bits intermediate counters for bps Eric Dumazet
2009-05-19 2:27 ` David Miller
2009-05-19 7:02 ` Jarek Poplawski
2009-05-19 7:31 ` Eric Dumazet
2009-05-19 7:42 ` Jarek Poplawski
2009-05-19 7:57 ` Jarek Poplawski
2009-05-19 18:03 ` Eric Dumazet
2009-05-19 19:09 ` [PATCH] pkt_sched: gen_estimator: Fix signed integers right-shifts Jarek Poplawski
2009-05-26 5:47 ` David Miller
2009-05-19 8:18 ` [PATCH] pkt_sched: gen_estimator: use 64 bits intermediate counters for bps David Miller
2009-05-17 20:15 ` HTB accuracy for high speed Jarek Poplawski
2009-05-18 6:56 ` [PATCH iproute2] " Jarek Poplawski
2009-05-18 16:54 ` Antonio Almeida
2009-05-18 17:16 ` Antonio Almeida
2009-05-21 8:51 ` Jarek Poplawski
2009-05-22 17:42 ` Antonio Almeida
2009-05-23 7:32 ` Jarek Poplawski
2009-05-28 18:13 ` Antonio Almeida
2009-05-28 21:12 ` Jarek Poplawski
2009-05-29 17:02 ` Antonio Almeida
2009-05-29 17:28 ` Stephen Hemminger
2009-05-29 19:58 ` Jarek Poplawski
2009-05-29 19:46 ` Jarek Poplawski
2009-05-29 20:49 ` Stephen Hemminger
2009-05-29 20:59 ` Jarek Poplawski
2009-05-30 20:07 ` Jarek Poplawski
2009-06-02 10:12 ` Antonio Almeida
2009-06-02 11:45 ` Antonio Almeida
2009-06-02 12:36 ` Jarek Poplawski
2009-06-02 12:45 ` Patrick McHardy
2009-06-02 13:08 ` Jarek Poplawski
2009-06-02 13:20 ` Patrick McHardy
2009-06-02 21:37 ` Jarek Poplawski
2009-06-02 21:50 ` Jarek Poplawski [this message]
2009-06-03 7:06 ` Patrick McHardy
2009-06-03 7:40 ` Jarek Poplawski
2009-06-03 7:53 ` Patrick McHardy
2009-06-03 8:01 ` Jarek Poplawski
2009-06-03 8:29 ` Patrick McHardy
2009-06-03 8:45 ` Jarek Poplawski
2009-06-03 9:54 ` Jarek Poplawski
2009-06-03 10:01 ` Patrick McHardy
2009-06-03 10:05 ` Patrick McHardy
2009-06-03 10:06 ` Patrick McHardy
2009-06-03 10:27 ` Jarek Poplawski
2009-06-04 13:50 ` Antonio Almeida
[not found] ` <20090604193013.GA2755@ami.dom.local>
[not found] ` <4A282216.20203@trash.net>
[not found] ` <20090604194203.GB2755@ami.dom.local>
2009-06-09 5:25 ` Badalian Vyacheslav
2009-06-09 5:49 ` Jarek Poplawski
2009-06-04 4:53 ` David Miller
2009-06-04 7:50 ` Jarek Poplawski
2009-05-18 17:53 ` Jarek Poplawski
2009-05-18 18:23 ` Antonio Almeida
2009-05-18 18:32 ` Jarek Poplawski
2009-05-18 18:56 ` Antonio Almeida
2009-05-18 19:05 ` Jarek Poplawski
2009-05-19 10:55 ` Antonio Almeida
2009-05-19 11:04 ` Denys Fedoryschenko
2009-05-19 11:18 ` Jarek Poplawski
2009-05-19 11:21 ` Denys Fedoryschenko
2009-05-19 11:28 ` Jarek Poplawski
2009-05-19 14:31 ` Antonio Almeida
2009-05-19 11:09 ` Jarek Poplawski
2009-05-19 13:18 ` Jesper Dangaard Brouer
2009-05-19 19:35 ` Jarek Poplawski
2009-05-18 7:01 ` [PATCH iproute2 v2] " Jarek Poplawski
2009-05-17 20:29 ` Vladimir Ivashchenko
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=4A259EB2.5010500@gmail.com \
--to=jarkao2@gmail.com \
--cc=dada1@cosmosbay.com \
--cc=davem@davemloft.net \
--cc=devik@cdi.cz \
--cc=hazard@francoudi.com \
--cc=kaber@trash.net \
--cc=netdev@vger.kernel.org \
--cc=shemminger@vyatta.com \
--cc=vexwek@gmail.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.