[U-Boot] [PATCH] sh: Add support ESPT-GIGA borad

[U-Boot] [PATCH] sh: Add support ESPT-GIGA borad

[Nobuhiro Iwamatsu]

ESPT-Giga is SH7763-based reference board.
Board support is relatively sparse, presently supporting serial,
gigabit ethernet, USB host, and MTD.

More information (in Japanese) available at:
http://www.cente.jp/product/cente_hard/ESPT-Giga.html

Signed-off-by: Nobuhiro Iwamatsu <iwamatsu.nobuhiro@renesas.com>
---
 Makefile                   |    5 +
 board/espt/Makefile        |   50 +++++++
 board/espt/config.mk       |    9 ++
 board/espt/espt.c          |   50 +++++++
 board/espt/lowlevel_init.S |  334 ++++++++++++++++++++++++++++++++++++++++++++
 include/configs/espt.h     |  126 +++++++++++++++++
 6 files changed, 574 insertions(+), 0 deletions(-)
 create mode 100644 board/espt/Makefile
 create mode 100644 board/espt/config.mk
 create mode 100644 board/espt/espt.c
 create mode 100644 board/espt/lowlevel_init.S
 create mode 100644 include/configs/espt.h

diff --git a/Makefile b/Makefile
index e34426c..4fb30ff 100644
--- a/Makefile
+++ b/Makefile
@@ -3511,6 +3511,11 @@ ap325rxa_config  :   unconfig
 	@echo "#define CONFIG_AP325RXA 1" > $(obj)include/config.h
 	@$(MKCONFIG) -a $(@:_config=) sh sh4 ap325rxa renesas

+espt_config  :   unconfig
+	@mkdir -p $(obj)include
+	@echo "#define CONFIG_ESPT 1" > $(obj)include/config.h
+	@$(MKCONFIG) -a $(@:_config=) sh sh4 espt
+
 #========================================================================
 # SPARC
 #========================================================================
diff --git a/board/espt/Makefile b/board/espt/Makefile
new file mode 100644
index 0000000..c79cba8
--- /dev/null
+++ b/board/espt/Makefile
@@ -0,0 +1,50 @@
+#
+# Copyright (C) 2009 Renesas Solutions Corp.
+# Copyright (C) 2009 Nobuhiro Iwamatsu <iwamatsu.nobuhiro@renesas.com>
+#
+# board/espt/Makefile
+#
+# This program is free software; you can redistribute it and/or
+# modify it under the terms of the GNU General Public License as
+# published by the Free Software Foundation; either version 2 of
+# the License, or (at your option) any later version.
+#
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+# GNU General Public License for more details.
+#
+# You should have received a copy of the GNU General Public License
+# along with this program; if not, write to the Free Software
+# Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+# MA 02111-1307 USA
+#
+
+include $(TOPDIR)/config.mk
+
+LIB	= $(obj)lib$(BOARD).a
+
+COBJS	:= espt.o
+SOBJS	:= lowlevel_init.o
+
+SRCS	:= $(SOBJS:.o=.S) $(COBJS:.o=.c)
+OBJS	:= $(addprefix $(obj),$(COBJS))
+SOBJS	:= $(addprefix $(obj),$(SOBJS))
+
+$(LIB):	$(OBJS) $(SOBJS)
+	$(AR) $(ARFLAGS) $@ $(OBJS) $(SOBJS)
+
+clean:
+	rm -f $(SOBJS) $(OBJS)
+
+distclean:	clean
+	rm -f $(LIB) core *.bak $(obj).depend
+
+#########################################################################
+
+# defines $(obj).depend target
+include $(SRCTREE)/rules.mk
+
+sinclude $(obj).depend
+
+#########################################################################
diff --git a/board/espt/config.mk b/board/espt/config.mk
new file mode 100644
index 0000000..006b432
--- /dev/null
+++ b/board/espt/config.mk
@@ -0,0 +1,9 @@
+#
+# board/espt/config.mk
+#
+# TEXT_BASE refers to image _after_ relocation.
+#
+# NOTE: Must match value used in u-boot.lds (in this directory).
+#
+
+TEXT_BASE = 0x8FFC0000
diff --git a/board/espt/espt.c b/board/espt/espt.c
new file mode 100644
index 0000000..2930858
--- /dev/null
+++ b/board/espt/espt.c
@@ -0,0 +1,50 @@
+/*
+ * Copyright (C) 2009 Renesas Solutions Corp.
+ * Copyright (C) 2009 Nobuhiro Iwamatsu <iwamatsu.nobuhiro@renesas.com>
+ *
+ * board/espt/espt.c
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#include <common.h>
+#include <asm/io.h>
+#include <asm/processor.h>
+
+int checkboard(void)
+{
+	puts("BOARD: ESPT-GIGA\n");
+	return 0;
+}
+
+int board_init(void)
+{
+	return 0;
+}
+
+int dram_init(void)
+{
+	DECLARE_GLOBAL_DATA_PTR;
+
+	gd->bd->bi_memstart = CONFIG_SYS_SDRAM_BASE;
+	gd->bd->bi_memsize = CONFIG_SYS_SDRAM_SIZE;
+	printf("DRAM:  %dMB\n", CONFIG_SYS_SDRAM_SIZE / (1024 * 1024));
+	return 0;
+}
+
+void led_set_state(unsigned short value)
+{
+}
diff --git a/board/espt/lowlevel_init.S b/board/espt/lowlevel_init.S
new file mode 100644
index 0000000..7d5d72e
--- /dev/null
+++ b/board/espt/lowlevel_init.S
@@ -0,0 +1,334 @@
+/*
+ * Copyright (C) 2009 Renesas Solutions Corp.
+ * Copyright (C) 2009 Nobuhiro Iwamatsu <iwamatsu.nobuhiro@renesas.com>
+ *
+ * board/espt/lowlevel_init.S
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#include <config.h>
+#include <version.h>
+#include <asm/processor.h>
+#include <asm/macro.h>
+
+	.global	lowlevel_init
+
+	.text
+	.align	2
+
+lowlevel_init:
+
+	write32 WDTCSR_A, WDTCSR_D
+
+	write32 WDTST_A, WDTST_D
+
+	write32 WDTBST_A, WDTBST_D
+
+	write32 CCR_A, CCR_CACHE_ICI_D
+
+	write32 MMUCR_A, MMU_CONTROL_TI_D
+
+	write32 MSTPCR0_A, MSTPCR0_D
+
+	write32 MSTPCR1_A, MSTPCR1_D
+
+	write32 RAMCR_A, RAMCR_D
+
+	/*
+	 * Setting infomation from
+	 * original ESPT-GIGA bootloader register
+	 */
+	write32 MMSEL_A, MMSEL_D
+
+	/* dummy */
+	mov.l   @r1, r2
+	mov.l   @r1, r2
+	synco
+
+    write32 BCR_A, BCR_D
+
+    write32 CS0BCR_A, CS0BCR_D
+
+    write32 CS0WCR_A, CS0WCR_D
+
+	/*
+	 * DDR-SDRAM setting
+	 */
+
+	/* set DDR-SDRAM dummy read */
+	write32 MMSEL_A, MMSEL_D
+
+	mov.l	MMSEL_A, r0
+	synco
+	mov.l	@r0, r1
+	synco
+
+	mov.l	CS0_A, r0
+	synco
+	mov.l	@r0, r1
+	synco
+
+	/* set DDR-SDRAM bus/endian etc */
+	write32 MIM_U_A, MIM_U_D
+
+	write32 MIM_L_A, MIM_L_D0
+
+	write32 SDR_L_A, SDR_L_A_D0
+
+	write32 STR_L_A, STR_L_A_D0
+
+	/* DDR-SDRAM access control */
+	write32 MIM_L_A, MIM_L_D1
+
+	write32 SCR_L_A, SCR_L_A_D0
+
+	write32 SCR_L_A, SCR_L_A_D1
+
+	write32 EMRS_A, EMRS_D
+
+	write32 MRS1_A, MRS1_D
+
+	write32 MIM_U_A, MIM_U_D
+
+	write32 MIM_L_A, MIM_L_A_D2
+
+	write32 SCR_L_A, SCR_L_A_D2
+
+	write32 SCR_L_A, SCR_L_A_D2
+
+	write32 MRS2_A, MRS2_D
+
+	/* wait 200us */
+	wait_timer REPEAT_R3
+
+	/* GPIO setting */
+	write16 PSEL0_A, PSEL0_D
+
+	write16 PSEL1_A, PSEL1_D
+
+	write16 PSEL2_A, PSEL2_D
+
+	write16 PSEL3_A, PSEL3_D
+
+	write16 PSEL4_A, PSEL4_D
+
+	write8 PADR_A, PADR_D
+
+	write16 PACR_A, PACR_D
+
+	write8 PBDR_A, PBDR_D
+
+	write16 PBCR_A, PBCR_D
+
+	write8 PCDR_A, PCDR_D
+
+	write16 PCCR_A, PCCR_D
+
+	write8	PDDR_A, PDDR_D
+
+	write16 PDCR_A, PDCR_D
+
+	write16 PECR_A, PECR_D
+
+	write16 PFCR_A, PFCR_D
+
+	write16 PGCR_A, PGCR_D
+
+	write16 PHCR_A, PHCR_D
+
+	write16 PICR_A, PICR_D
+
+	write8 PJDR_A, PJDR_D
+
+	write16 PJCR_A, PJCR_D
+
+	/* wait 50us */
+	wait_timer REPEAT_R3
+
+	write8 PKDR_A, PKDR_D
+
+	write16 PKCR_A, PKCR_D
+
+	write16 PLCR_A, PLCR_D
+
+	write16 PMCR_A, PMCR_D
+
+	write16 PNCR_A, PNCR_D
+
+	write16 POCR_A, POCR_D
+
+
+	/* ICR0 ,ICR1 */
+	write32 ICR0_A, ICR0_D
+
+	write32 ICR1_A, ICR1_D
+
+	/* USB Host */
+	write32 USB_USBHSC_A, USB_USBHSC_D
+
+	write32 CCR_A, CCR_CACHE_D_2
+
+	rts
+	nop
+
+	.align	2
+
+/* GPIO Crontrol Register */
+PACR_A:	.long	0xFFEF0000
+PBCR_A:	.long	0xFFEF0002
+PCCR_A:	.long	0xFFEF0004
+PDCR_A:	.long	0xFFEF0006
+PECR_A:	.long	0xFFEF0008
+PFCR_A:	.long	0xFFEF000A
+PGCR_A:	.long	0xFFEF000C
+PHCR_A:	.long	0xFFEF000E
+PICR_A:	.long	0xFFEF0010
+PJCR_A:	.long	0xFFEF0012
+PKCR_A:	.long	0xFFEF0014
+PLCR_A:	.long	0xFFEF0016
+PMCR_A:	.long	0xFFEF0018
+PNCR_A:	.long	0xFFEF001A
+POCR_A:	.long	0xFFEF001C
+
+/* GPIO Data Register */
+PADR_A:	.long	0xFFEF0020
+PBDR_A:	.long	0xFFEF0022
+PCDR_A:	.long	0xFFEF0024
+PDDR_A:	.long	0xFFEF0026
+PJDR_A:	.long	0xFFEF0032
+PKDR_A:	.long	0xFFEF0034
+
+/* GPIO Set data */
+PADR_D:	.long	0x00000000
+PACR_D:	.long 	0x00001400
+PBDR_D:	.long	0x00000000
+PBCR_D:	.long	0x0000555A
+PCDR_D:	.long	0x00000000
+PCCR_D:	.long	0x00005555
+PDDR_D:	.long	0x00000000
+PDCR_D:	.long	0x00000155
+PECR_D:	.long	0x00000000
+PFCR_D:	.long	0x00000000
+PGCR_D:	.long	0x00000000
+PHCR_D:	.long	0x00000000
+PICR_D:	.long	0x00000800
+PJDR_D:	.long	0x00000006
+PJCR_D:	.long	0x00005A57
+PKDR_D:	.long	0x00000000
+PKCR_D:	.long	0x0000FFF9
+PLCR_D:	.long 	0x0000C330
+PMCR_D:	.long	0x0000FFFF
+PNCR_D:	.long	0x00000242
+POCR_D:	.long	0x00000000
+
+/* Pin Select */
+PSEL0_A:	.long	0xFFEF0070
+PSEL1_A:	.long	0xFFEF0072
+PSEL2_A:	.long	0xFFEF0074
+PSEL3_A:	.long	0xFFEF0076
+PSEL4_A:	.long	0xFFEF0078
+PSEL0_D:	.long	0x0001
+PSEL1_D:	.long	0x2400
+PSEL2_D:	.long	0x0000
+PSEL3_D:	.long	0x2421
+PSEL4_D:	.long	0x0000
+
+MMSEL_A:	.long	0xFE600020
+BCR_A:		.long	0xFF801000
+CS0BCR_A:	.long	0xFF802000
+CS0WCR_A:	.long	0xFF802008
+ICR0_A:		.long	0xFFD00000
+ICR1_A:		.long	0xFFD0001C
+
+MMSEL_D:	.long	0xA5A50000
+BCR_D:		.long	0x05000000
+CS0BCR_D:	.long	0x232306F0
+CS0WCR_D:	.long	0x00011104
+ICR0_D:		.long	0x80C00000
+ICR1_D:		.long	0x00020000
+
+/* RWBT Address */
+WDTST_A:	.long	0xFFCC0000
+WDTCSR_A:	.long	0xFFCC0004
+WDTBST_A:	.long	0xFFCC0008
+/* RWBT Data */
+WDTST_D:	.long	0x5A000FFF
+WDTCSR_D:	.long	0xA5000000
+WDTBST_D:	.long	0x55000000
+
+/* Cache Address */
+CCR_A:		.long	0xFF00001C
+MMUCR_A:	.long	0xFF000010
+RAMCR_A:	.long	0xFF000074
+
+/* Cache Data */
+CCR_CACHE_ICI_D:.long	0x00000800
+CCR_CACHE_D_2:	.long	0x00000103
+MMU_CONTROL_TI_D:.long	0x00000004
+RAMCR_D:	.long	0x00000200
+
+/* Low power mode control Address */
+MSTPCR0_A:	.long	0xFFC80030
+MSTPCR1_A:	.long	0xFFC80038
+/* Low power mode control Data */
+MSTPCR0_D:	.long	0x00000000
+MSTPCR1_D:	.long	0x00000000
+
+REPEAT0_R3:	.long	0x00002000
+REPEAT_R3:	.long	0x00000200
+CS0_A:		.long	0xA8000000
+
+MIM_U_A:	.long	0xFE800008
+MIM_L_A:	.long	0xFE80000C
+SCR_U_A:	.long	0xFE800010
+SCR_L_A:	.long	0xFE800014
+STR_U_A:	.long	0xFE800018
+STR_L_A:	.long	0xFE80001C
+SDR_U_A:	.long	0xFE800030
+SDR_L_A:	.long	0xFE800034
+EMRS_A:		.long	0xFE902000
+MRS1_A:		.long	0xFE900B08
+MRS2_A:		.long	0xFE900308
+
+MIM_U_D:	.long	0x00000000
+MIM_L_D0:	.long	0x04100008
+MIM_L_D1:	.long	0x02EE0009
+MIM_L_D2:	.long	0x02EE0209
+
+SDR_L_A_D0:	.long	0x00000300
+STR_L_A_D0:	.long	0x00010040
+MIM_L_A_D1:	.long	0x04100009
+SCR_L_A_D0:	.long 	0x00000003
+SCR_L_A_D1:	.long 	0x00000002
+MIM_L_A_D2:	.long	0x04100209
+SCR_L_A_D2:	.long	0x00000004
+
+SCR_L_NORMAL:	.long	0x00000000
+SCR_L_NOP:		.long	0x00000001
+SCR_L_PALL:		.long	0x00000002
+SCR_L_CKE_EN:	.long	0x00000003
+SCR_L_CBR:		.long	0x00000004
+
+STR_L_D:	.long	0x000F3980
+SDR_L_D:	.long	0x00000400
+EMRS_D:		.long	0x00000000
+MRS1_D:		.long	0x00000000
+MRS2_D:		.long	0x00000000
+
+/* USB */
+USB_USBHSC_A:	.long	0xFFEC80F0
+USB_USBHSC_D:	.long	0x00000000
diff --git a/include/configs/espt.h b/include/configs/espt.h
new file mode 100644
index 0000000..2ec907c
--- /dev/null
+++ b/include/configs/espt.h
@@ -0,0 +1,126 @@
+/*
+ * Configuation settings for the ESPT-GIGA board
+ *
+ * Copyright (C) 2008 Renesas Solutions Corp.
+ * Copyright (C) 2008 Nobuhiro Iwamatsu <iwamatsu.nobuhiro@renesas.com>
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#ifndef __ESPT_H
+#define __ESPT_H
+
+#define CONFIG_SH		1
+#define CONFIG_SH4		1
+#define CONFIG_CPU_SH7763	1
+#define CONFIG_ESPT	1
+#define __LITTLE_ENDIAN		1
+
+/*
+ * Command line configuration.
+ */
+#define CONFIG_CMD_SDRAM
+#define CONFIG_CMD_FLASH
+#define CONFIG_CMD_MEMORY
+#define CONFIG_CMD_NET
+#define CONFIG_CMD_PING
+#define CONFIG_CMD_ENV
+#define CONFIG_CMD_NFS
+#define CONFIG_CMD_SAVEENV
+
+#define CONFIG_BOOTDELAY        -1
+#define CONFIG_BOOTARGS         "console=ttySC0,115200 root=1f01"
+#define CONFIG_ENV_OVERWRITE    1
+
+#define CONFIG_VERSION_VARIABLE
+#undef  CONFIG_SHOW_BOOT_PROGRESS
+
+/* SCIF */
+#define CONFIG_SCIF_CONSOLE		1
+#define CONFIG_BAUDRATE         115200
+#define CONFIG_CONS_SCIF0		1
+
+#define CONFIG_SYS_LONGHELP		/* undef to save memory */
+#define CONFIG_SYS_PROMPT		"=> "	/* Monitor Command Prompt */
+#define CONFIG_SYS_CBSIZE		256	/* Buffer size for input from the Console */
+#define CONFIG_SYS_PBSIZE		256	/* Buffer size for Console output */
+#define CONFIG_SYS_MAXARGS		16	/* max args accepted for monitor commands */
+#define CONFIG_SYS_BARGSIZE	512	/* Buffer size for Boot Arguments
+								passed to kernel */
+#define CONFIG_SYS_BAUDRATE_TABLE	{ 115200 }	/* List of legal baudrate
+												settings for this board */
+
+/* SDRAM */
+#define CONFIG_SYS_SDRAM_BASE		(0x8C000000)
+#define CONFIG_SYS_SDRAM_SIZE		(64 * 1024 * 1024)
+#define CONFIG_SYS_MEMTEST_START	(CONFIG_SYS_SDRAM_BASE)
+#define CONFIG_SYS_MEMTEST_END		(CONFIG_SYS_MEMTEST_START + (60 * 1024 * 1024))
+
+/* Flash(NOR) S29JL064H */
+#define CONFIG_SYS_FLASH_BASE		(0xA0000000)
+#define CONFIG_SYS_FLASH_CFI_WIDTH (FLASH_CFI_16BIT)
+#define CONFIG_SYS_MAX_FLASH_BANKS (1)
+#define CONFIG_SYS_MAX_FLASH_SECT  (150)
+
+/* U-boot setting */
+#define CONFIG_SYS_LOAD_ADDR		(CONFIG_SYS_SDRAM_BASE + 4 * 1024 * 1024)
+#define CONFIG_SYS_MONITOR_BASE	(CONFIG_SYS_FLASH_BASE)
+#define CONFIG_SYS_MONITOR_LEN		(128 * 1024)
+/* Size of DRAM reserved for malloc() use */
+#define CONFIG_SYS_MALLOC_LEN		(1024 * 1024)
+/* size in bytes reserved for initial data */
+#define CONFIG_SYS_GBL_DATA_SIZE	(256)
+#define CONFIG_SYS_BOOTMAPSZ		(8 * 1024 * 1024)
+
+#define CONFIG_SYS_FLASH_CFI
+#define CONFIG_FLASH_CFI_DRIVER
+#undef  CONFIG_SYS_FLASH_QUIET_TEST
+#define CONFIG_SYS_FLASH_EMPTY_INFO	/* print 'E' for empty sector on flinfo */
+/* Timeout for Flash erase operations (in ms) */
+#define CONFIG_SYS_FLASH_ERASE_TOUT	(3 * 1000)
+/* Timeout for Flash write operations (in ms) */
+#define CONFIG_SYS_FLASH_WRITE_TOUT	(3 * 1000)
+/* Timeout for Flash set sector lock bit operations (in ms) */
+#define CONFIG_SYS_FLASH_LOCK_TOUT		(3 * 1000)
+/* Timeout for Flash clear lock bit operations (in ms) */
+#define CONFIG_SYS_FLASH_UNLOCK_TOUT	(3 * 1000)
+/* Use hardware flash sectors protection instead of U-Boot software protection */
+#undef  CONFIG_SYS_FLASH_PROTECTION
+#undef  CONFIG_SYS_DIRECT_FLASH_TFTP
+#define CONFIG_ENV_IS_IN_FLASH
+#define CONFIG_ENV_SECT_SIZE	(128 * 1024)
+#define CONFIG_ENV_SIZE		(CONFIG_ENV_SECT_SIZE)
+#define CONFIG_ENV_ADDR		(CONFIG_SYS_FLASH_BASE + (1 * CONFIG_ENV_SECT_SIZE))
+/* Offset of env Flash sector relative to CONFIG_SYS_FLASH_BASE */
+#define CONFIG_ENV_OFFSET		(CONFIG_ENV_ADDR - CONFIG_SYS_FLASH_BASE)
+#define CONFIG_ENV_SIZE_REDUND	(CONFIG_ENV_SECT_SIZE)
+#define CONFIG_ENV_ADDR_REDUND	(CONFIG_SYS_FLASH_BASE + (2 * CONFIG_ENV_SECT_SIZE))
+
+/* Clock */
+#define CONFIG_SYS_CLK_FREQ	66666666
+#define CONFIG_SYS_TMU_CLK_DIV      4
+#define CONFIG_SYS_HZ       1000
+
+/* Ether */
+#define CONFIG_NET_MULTI 1
+#define CONFIG_SH_ETHER 1
+#define CONFIG_SH_ETHER_USE_PORT (1)
+#define CONFIG_SH_ETHER_PHY_ADDR (0x00)
+
+#endif /* __SH7763RDP_H */
-- 
1.6.3.1