[PATCH 2/2] sky2: Reset tx train after interrupts disabled

[PATCH 2/2] sky2: Reset tx train after interrupts disabled

[Mike McCormack]

Reseting the tx chain too soon results in invalid tx queue positions
being delivered in the status queue.  This also makes sure there's no
overlap between the cleanup done by sky2_tx_clean() and sky2_tx_done().

Signed-off-by: Mike McCormack <mikem@ring3k.org>
---
 drivers/net/sky2.c |    4 ++--
 1 files changed, 2 insertions(+), 2 deletions(-)

diff --git a/drivers/net/sky2.c b/drivers/net/sky2.c
index cb3412a..e9cb1e7 100644
--- a/drivers/net/sky2.c
+++ b/drivers/net/sky2.c
@@ -1875,8 +1875,6 @@ static int sky2_down(struct net_device *dev)
 	      && port == 0 && hw->dev[1] && netif_running(hw->dev[1])))
 		sky2_write8(hw, SK_REG(port, GMAC_CTRL), GMC_RST_SET);
 
-	sky2_tx_reset(sky2);
-
 	sky2_write8(hw, SK_REG(port, RX_GMF_CTRL_T), GMF_RST_SET);
 
 	/* Force any delayed status interrrupt and NAPI */
@@ -1901,6 +1899,8 @@ static int sky2_down(struct net_device *dev)
 	/* turn off LED's */
 	sky2_write16(hw, B0_Y2LED, LED_STAT_OFF);
 
+	sky2_tx_reset(sky2);
+
 	sky2_tx_clean(dev);
 	sky2_rx_clean(sky2);
 
-- 
1.5.6.5