All of lore.kernel.org
 help / color / mirror / Atom feed
From: Mike McCormack <mikem@ring3k.org>
To: Stephen Hemminger <shemminger@linux-foundation.org>
Cc: netdev@vger.kernel.org, Rene Mayrhofer <rene@mayrhofer.eu.org>,
	Richard Leitner <leitner@esys.at>
Subject: [PATCH] sky2: Serialize access to PCI config space
Date: Thu, 06 Aug 2009 20:10:27 +0900	[thread overview]
Message-ID: <4A7ABA23.6060201@ring3k.org> (raw)

PCI config space may be shared across two device instances,
 or accessed from an interrupt
 , so serialize access so
 read-update-write operations do not interfere with each other.

Only tested on a single port card, as my sky2 doesn't have dual ports.

Signed-off-by: Mike McCormack <mikem@ring3k.org>
---
 drivers/net/sky2.c |   23 ++++++++++++++++-------
 drivers/net/sky2.h |    1 +
 2 files changed, 17 insertions(+), 7 deletions(-)

diff --git a/drivers/net/sky2.c b/drivers/net/sky2.c
index 1415a83..4d09632 100644
--- a/drivers/net/sky2.c
+++ b/drivers/net/sky2.c
@@ -618,6 +618,7 @@ static void sky2_phy_power_up(struct sky2_hw *hw, unsigned port)
 {
 	u32 reg1;
 
+	spin_lock(&hw->pci_cfg_lock);
 	sky2_write8(hw, B2_TST_CTRL1, TST_CFG_WRITE_ON);
 	reg1 = sky2_pci_read32(hw, PCI_DEV_REG1);
 	reg1 &= ~phy_power[port];
@@ -628,6 +629,7 @@ static void sky2_phy_power_up(struct sky2_hw *hw, unsigned port)
 	sky2_pci_write32(hw, PCI_DEV_REG1, reg1);
 	sky2_write8(hw, B2_TST_CTRL1, TST_CFG_WRITE_OFF);
 	sky2_pci_read32(hw, PCI_DEV_REG1);
+	spin_unlock(&hw->pci_cfg_lock);
 
 	if (hw->chip_id == CHIP_ID_YUKON_FE)
 		gm_phy_write(hw, port, PHY_MARV_CTRL, PHY_CT_ANE);
@@ -681,11 +683,13 @@ static void sky2_phy_power_down(struct sky2_hw *hw, unsigned port)
 		gm_phy_write(hw, port, PHY_MARV_CTRL, PHY_CT_PDOWN);
 	}
 
+	spin_lock(&hw->pci_cfg_lock);
 	sky2_write8(hw, B2_TST_CTRL1, TST_CFG_WRITE_ON);
 	reg1 = sky2_pci_read32(hw, PCI_DEV_REG1);
 	reg1 |= phy_power[port];		/* set PHY to PowerDown/COMA Mode */
 	sky2_pci_write32(hw, PCI_DEV_REG1, reg1);
 	sky2_write8(hw, B2_TST_CTRL1, TST_CFG_WRITE_OFF);
+	spin_unlock(&hw->pci_cfg_lock);
 }
 
 /* Force a renegotiation */
@@ -2596,30 +2600,34 @@ static void sky2_hw_intr(struct sky2_hw *hw)
 	if (status & (Y2_IS_MST_ERR | Y2_IS_IRQ_STAT)) {
 		u16 pci_err;
 
+		spin_lock(&hw->pci_cfg_lock);
 		sky2_write8(hw, B2_TST_CTRL1, TST_CFG_WRITE_ON);
 		pci_err = sky2_pci_read16(hw, PCI_STATUS);
-		if (net_ratelimit())
-			dev_err(&pdev->dev, "PCI hardware error (0x%x)\n",
-			        pci_err);
-
 		sky2_pci_write16(hw, PCI_STATUS,
 				      pci_err | PCI_STATUS_ERROR_BITS);
 		sky2_write8(hw, B2_TST_CTRL1, TST_CFG_WRITE_OFF);
+		spin_unlock(&hw->pci_cfg_lock);
+
+		if (net_ratelimit())
+			dev_err(&pdev->dev, "PCI hardware error (0x%x)\n",
+			        pci_err);
 	}
 
 	if (status & Y2_IS_PCI_EXP) {
 		/* PCI-Express uncorrectable Error occurred */
 		u32 err;
 
+		spin_lock(&hw->pci_cfg_lock);
 		sky2_write8(hw, B2_TST_CTRL1, TST_CFG_WRITE_ON);
 		err = sky2_read32(hw, Y2_CFG_AER + PCI_ERR_UNCOR_STATUS);
 		sky2_write32(hw, Y2_CFG_AER + PCI_ERR_UNCOR_STATUS,
 			     0xfffffffful);
-		if (net_ratelimit())
-			dev_err(&pdev->dev, "PCI Express error (0x%x)\n", err);
-
 		sky2_read32(hw, Y2_CFG_AER + PCI_ERR_UNCOR_STATUS);
 		sky2_write8(hw, B2_TST_CTRL1, TST_CFG_WRITE_OFF);
+		spin_unlock(&hw->pci_cfg_lock);
+
+		if (net_ratelimit())
+			dev_err(&pdev->dev, "PCI Express error (0x%x)\n", err);
 	}
 
 	if (status & Y2_HWE_L1_MASK)
@@ -4485,6 +4493,7 @@ static int __devinit sky2_probe(struct pci_dev *pdev,
 	}
 
 	hw->pdev = pdev;
+	spin_lock_init(&hw->pci_cfg_lock);
 
 	hw->regs = ioremap_nocache(pci_resource_start(pdev, 0), 0x4000);
 	if (!hw->regs) {
diff --git a/drivers/net/sky2.h b/drivers/net/sky2.h
index 4486b06..5a9b0cf 100644
--- a/drivers/net/sky2.h
+++ b/drivers/net/sky2.h
@@ -2087,6 +2087,7 @@ struct sky2_hw {
 	struct timer_list    watchdog_timer;
 	struct work_struct   restart_work;
 	wait_queue_head_t    msi_wait;
+	spinlock_t	     pci_cfg_lock;
 };
 
 static inline int sky2_is_copper(const struct sky2_hw *hw)
-- 
1.5.6.5


             reply	other threads:[~2009-08-06 11:20 UTC|newest]

Thread overview: 5+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2009-08-06 11:10 Mike McCormack [this message]
2009-08-06 15:34 ` [PATCH] sky2: Serialize access to PCI config space Stephen Hemminger
  -- strict thread matches above, loose matches on Subject: below --
2009-08-09 11:37 Mike McCormack
2009-08-10 15:23 ` Stephen Hemminger
2009-08-10 15:27 ` Stephen Hemminger

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=4A7ABA23.6060201@ring3k.org \
    --to=mikem@ring3k.org \
    --cc=leitner@esys.at \
    --cc=netdev@vger.kernel.org \
    --cc=rene@mayrhofer.eu.org \
    --cc=shemminger@linux-foundation.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.