* [nouveau] nv50 report
@ 2009-08-07 21:26 provider.spb-JGs/UdohzUI
0 siblings, 0 replies; only message in thread
From: provider.spb-JGs/UdohzUI @ 2009-08-07 21:26 UTC (permalink / raw)
To: skeggsb-Re5JQEeQqe8AvxtiuMwx3w; +Cc: nouveau-PD4FTy7X32lNgt0PjOBp9y5qC8QIuHrW
[-- Attachment #1: Type: text/plain, Size: 671 bytes --]
Hello all!
Hello, Ben!
After the latest update in ubuntu karmic, i have working nouveau setup -
still not working KMS without uscript_lvds=1 added to kernel command
line, but with uscript_lvds=1 KMS works very well. EXAPixmaps working
very good, expect some lockups about 15-20 seconds with "nouveau
0000:01:00.0: Unhandled PFIFO_INTR - 0x00000010" in syslog. And now i
have 2D image corruption only with EXAPixmaps disabled.
Here is my dmesg and my xorg.0.log.
I can provide any additional info, if you need.
Sorry for my english, it's my foreign language.
Thank you all for your work!
--------------------------------------
Dmitriy Vasin,
Gigzbyte Security Group
[-- Attachment #2: dmesg --]
[-- Type: text/plain, Size: 57141 bytes --]
[ 0.000000] Initializing cgroup subsys cpuset
[ 0.000000] Initializing cgroup subsys cpu
[ 0.000000] Linux version 2.6.31-5-generic (buildd@crested) (gcc version 4.4.1 (Ubuntu 4.4.1-1ubuntu1) ) #24-Ubuntu SMP Sat Aug 1 12:47:58 UTC 2009 (Ubuntu 2.6.31-5.24-generic)
[ 0.000000] Command line: BOOT_IMAGE=/vmlinuz-2.6.31-5-generic root=UUID=d92ee209-c032-4c4e-8e41-be8df8b8f231 ro nouveau.modeset=1 nouveau.uscript_lvds=1
[ 0.000000] KERNEL supported cpus:
[ 0.000000] Intel GenuineIntel
[ 0.000000] AMD AuthenticAMD
[ 0.000000] Centaur CentaurHauls
[ 0.000000] BIOS-provided physical RAM map:
[ 0.000000] BIOS-e820: 0000000000000000 - 000000000009f800 (usable)
[ 0.000000] BIOS-e820: 000000000009f800 - 00000000000a0000 (reserved)
[ 0.000000] BIOS-e820: 00000000000ce000 - 00000000000d0000 (reserved)
[ 0.000000] BIOS-e820: 00000000000e0000 - 0000000000100000 (reserved)
[ 0.000000] BIOS-e820: 0000000000100000 - 000000003fed0000 (usable)
[ 0.000000] BIOS-e820: 000000003fed0000 - 000000003fee1000 (ACPI NVS)
[ 0.000000] BIOS-e820: 000000003fee1000 - 0000000040000000 (reserved)
[ 0.000000] BIOS-e820: 00000000e0000000 - 00000000f0000000 (reserved)
[ 0.000000] BIOS-e820: 00000000fec00000 - 00000000fec10000 (reserved)
[ 0.000000] BIOS-e820: 00000000fed00000 - 00000000fed00400 (reserved)
[ 0.000000] BIOS-e820: 00000000fed14000 - 00000000fed1a000 (reserved)
[ 0.000000] BIOS-e820: 00000000fed1c000 - 00000000fed90000 (reserved)
[ 0.000000] BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved)
[ 0.000000] BIOS-e820: 00000000ff000000 - 0000000100000000 (reserved)
[ 0.000000] DMI present.
[ 0.000000] last_pfn = 0x3fed0 max_arch_pfn = 0x400000000
[ 0.000000] MTRR default type: uncachable
[ 0.000000] MTRR fixed ranges enabled:
[ 0.000000] 00000-9FFFF write-back
[ 0.000000] A0000-BFFFF uncachable
[ 0.000000] C0000-FFFFF write-protect
[ 0.000000] MTRR variable ranges enabled:
[ 0.000000] 0 base 000000000 mask FC0000000 write-back
[ 0.000000] 1 base 03FF00000 mask FFFF00000 uncachable
[ 0.000000] 2 disabled
[ 0.000000] 3 disabled
[ 0.000000] 4 disabled
[ 0.000000] 5 disabled
[ 0.000000] 6 disabled
[ 0.000000] 7 disabled
[ 0.000000] e820 update range: 0000000000001000 - 0000000000006000 (usable) ==> (reserved)
[ 0.000000] Scanning 1 areas for low memory corruption
[ 0.000000] modified physical RAM map:
[ 0.000000] modified: 0000000000000000 - 0000000000001000 (usable)
[ 0.000000] modified: 0000000000001000 - 0000000000006000 (reserved)
[ 0.000000] modified: 0000000000006000 - 000000000009f800 (usable)
[ 0.000000] modified: 000000000009f800 - 00000000000a0000 (reserved)
[ 0.000000] modified: 00000000000ce000 - 00000000000d0000 (reserved)
[ 0.000000] modified: 00000000000e0000 - 0000000000100000 (reserved)
[ 0.000000] modified: 0000000000100000 - 000000003fed0000 (usable)
[ 0.000000] modified: 000000003fed0000 - 000000003fee1000 (ACPI NVS)
[ 0.000000] modified: 000000003fee1000 - 0000000040000000 (reserved)
[ 0.000000] modified: 00000000e0000000 - 00000000f0000000 (reserved)
[ 0.000000] modified: 00000000fec00000 - 00000000fec10000 (reserved)
[ 0.000000] modified: 00000000fed00000 - 00000000fed00400 (reserved)
[ 0.000000] modified: 00000000fed14000 - 00000000fed1a000 (reserved)
[ 0.000000] modified: 00000000fed1c000 - 00000000fed90000 (reserved)
[ 0.000000] modified: 00000000fee00000 - 00000000fee01000 (reserved)
[ 0.000000] modified: 00000000ff000000 - 0000000100000000 (reserved)
[ 0.000000] initial memory mapped : 0 - 20000000
[ 0.000000] init_memory_mapping: 0000000000000000-000000003fed0000
[ 0.000000] Using x86 segment limits to approximate NX protection
[ 0.000000] 0000000000 - 003fe00000 page 2M
[ 0.000000] 003fe00000 - 003fed0000 page 4k
[ 0.000000] kernel direct mapping tables up to 3fed0000 @ 8000-b000
[ 0.000000] RAMDISK: 2f82c000 - 2ff5bc5b
[ 0.000000] ACPI: RSDP 00000000000f7b40 00024 (v02 PTLTD )
[ 0.000000] ACPI: XSDT 000000003fed3937 0007C (v01 ACRSYS ACRPRDCT 06040000 LTP 00000000)
[ 0.000000] ACPI: FACP 000000003feddc2a 000F4 (v03 INTEL CRESTLNE 06040000 ALAN 00000001)
[ 0.000000] ACPI: DSDT 000000003fed4db5 08E01 (v02 INTEL CRESTLNE 06040000 MSFT 03000001)
[ 0.000000] ACPI: FACS 000000003fee0fc0 00040
[ 0.000000] ACPI: APIC 000000003feddd1e 00068 (v01 INTEL CRESTLNE 06040000 LOHR 0000005A)
[ 0.000000] ACPI: HPET 000000003feddd86 00038 (v01 INTEL CRESTLNE 06040000 LOHR 0000005A)
[ 0.000000] ACPI: MCFG 000000003fedddbe 0003C (v01 INTEL CRESTLNE 06040000 LOHR 0000005A)
[ 0.000000] ACPI: APIC 000000003fedddfa 00068 (v01 PTLTD APIC 06040000 LTP 00000000)
[ 0.000000] ACPI: BOOT 000000003fedde62 00028 (v01 PTLTD $SBFTBL$ 06040000 LTP 00000001)
[ 0.000000] ACPI: SLIC 000000003fedde8a 00176 (v01 ACRSYS ACRPRDCT 06040000 acer 00000000)
[ 0.000000] ACPI: SSDT 000000003fed4ad8 002DD (v01 SataRe SataAhci 00001000 INTL 20050624)
[ 0.000000] ACPI: SSDT 000000003fed3f3f 0025F (v01 PmRef Cpu0Tst 00003000 INTL 20050624)
[ 0.000000] ACPI: SSDT 000000003fed3e99 000A6 (v01 PmRef Cpu1Tst 00003000 INTL 20050624)
[ 0.000000] ACPI: SSDT 000000003fed39b3 004E6 (v01 PmRef CpuPm 00003000 INTL 20050624)
[ 0.000000] ACPI: BIOS bug: multiple APIC/MADT found, using 0
[ 0.000000] ACPI: If "acpi_apic_instance=2" works better, notify linux-acpi@vger.kernel.org
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] No NUMA configuration found
[ 0.000000] Faking a node at 0000000000000000-000000003fed0000
[ 0.000000] Bootmem setup node 0 0000000000000000-000000003fed0000
[ 0.000000] NODE_DATA [0000000000009000 - 000000000000dfff]
[ 0.000000] bootmap [000000000000e000 - 0000000000015fdf] pages 8
[ 0.000000] (7 early reservations) ==> bootmem [0000000000 - 003fed0000]
[ 0.000000] #0 [0000000000 - 0000001000] BIOS data page ==> [0000000000 - 0000001000]
[ 0.000000] #1 [0000006000 - 0000008000] TRAMPOLINE ==> [0000006000 - 0000008000]
[ 0.000000] #2 [0001000000 - 00019b608c] TEXT DATA BSS ==> [0001000000 - 00019b608c]
[ 0.000000] #3 [002f82c000 - 002ff5bc5b] RAMDISK ==> [002f82c000 - 002ff5bc5b]
[ 0.000000] #4 [000009f800 - 0000100000] BIOS reserved ==> [000009f800 - 0000100000]
[ 0.000000] #5 [00019b7000 - 00019b7178] BRK ==> [00019b7000 - 00019b7178]
[ 0.000000] #6 [0000008000 - 0000009000] PGTABLE ==> [0000008000 - 0000009000]
[ 0.000000] found SMP MP-table at [ffff8800000f7b70] f7b70
[ 0.000000] [ffffea0000000000-ffffea0000dfffff] PMD -> [ffff880001e00000-ffff880002bfffff] on node 0
[ 0.000000] Zone PFN ranges:
[ 0.000000] DMA 0x00000000 -> 0x00001000
[ 0.000000] DMA32 0x00001000 -> 0x00100000
[ 0.000000] Normal 0x00100000 -> 0x00100000
[ 0.000000] Movable zone start PFN for each node
[ 0.000000] early_node_map[3] active PFN ranges
[ 0.000000] 0: 0x00000000 -> 0x00000001
[ 0.000000] 0: 0x00000006 -> 0x0000009f
[ 0.000000] 0: 0x00000100 -> 0x0003fed0
[ 0.000000] On node 0 totalpages: 261738
[ 0.000000] DMA zone: 56 pages used for memmap
[ 0.000000] DMA zone: 100 pages reserved
[ 0.000000] DMA zone: 3838 pages, LIFO batch:0
[ 0.000000] DMA32 zone: 3524 pages used for memmap
[ 0.000000] DMA32 zone: 254220 pages, LIFO batch:31
[ 0.000000] ACPI: PM-Timer IO Port: 0x1008
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled)
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
[ 0.000000] ACPI: IOAPIC (id[0x01] address[0xfec00000] gsi_base[0])
[ 0.000000] IOAPIC[0]: apic_id 1, version 32, address 0xfec00000, GSI 0-23
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[ 0.000000] ACPI: IRQ0 used by override.
[ 0.000000] ACPI: IRQ2 used by override.
[ 0.000000] ACPI: IRQ9 used by override.
[ 0.000000] Using ACPI (MADT) for SMP configuration information
[ 0.000000] ACPI: HPET id: 0x8086a201 base: 0xfed00000
[ 0.000000] SMP: Allowing 2 CPUs, 0 hotplug CPUs
[ 0.000000] nr_irqs_gsi: 24
[ 0.000000] PM: Registered nosave memory: 0000000000001000 - 0000000000006000
[ 0.000000] PM: Registered nosave memory: 000000000009f000 - 00000000000a0000
[ 0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000ce000
[ 0.000000] PM: Registered nosave memory: 00000000000ce000 - 00000000000d0000
[ 0.000000] PM: Registered nosave memory: 00000000000d0000 - 00000000000e0000
[ 0.000000] PM: Registered nosave memory: 00000000000e0000 - 0000000000100000
[ 0.000000] Allocating PCI resources starting at 40000000 (gap: 40000000:a0000000)
[ 0.000000] NR_CPUS:64 nr_cpumask_bits:64 nr_cpu_ids:2 nr_node_ids:1
[ 0.000000] PERCPU: Embedded 29 pages at ffff8800019c2000, static data 89952 bytes
[ 0.000000] Built 1 zonelists in Node order, mobility grouping on. Total pages: 258058
[ 0.000000] Policy zone: DMA32
[ 0.000000] Kernel command line: BOOT_IMAGE=/vmlinuz-2.6.31-5-generic root=UUID=d92ee209-c032-4c4e-8e41-be8df8b8f231 ro nouveau.modeset=1 nouveau.uscript_lvds=1
[ 0.000000] Unknown boot option `nouveau.modeset=1': ignoring
[ 0.000000] Unknown boot option `nouveau.uscript_lvds=1': ignoring
[ 0.000000] PID hash table entries: 4096 (order: 12, 32768 bytes)
[ 0.000000] Initializing CPU#0
[ 0.000000] Checking aperture...
[ 0.000000] No AGP bridge found
[ 0.000000] Calgary: detecting Calgary via BIOS EBDA area
[ 0.000000] Calgary: Unable to locate Rio Grande table in EBDA - bailing!
[ 0.000000] Memory: 1014932k/1047360k available (5266k kernel code, 408k absent, 32020k reserved, 2974k data, 652k init)
[ 0.000000] SLUB: Genslabs=14, HWalign=64, Order=0-3, MinObjects=0, CPUs=2, Nodes=1
[ 0.000000] NR_IRQS:4352 nr_irqs:424
[ 0.000000] Extended CMOS year: 2000
[ 0.000000] Fast TSC calibration using PIT
[ 0.000000] Detected 1833.277 MHz processor.
[ 0.001977] Console: colour VGA+ 80x25
[ 0.001980] console [tty0] enabled
[ 0.004000] allocated 10485760 bytes of page_cgroup
[ 0.004000] please try 'cgroup_disable=memory' option if you don't want memory cgroups
[ 0.004000] hpet clockevent registered
[ 0.004000] HPET: 3 timers in total, 0 timers will be used for per-cpu timer
[ 0.004000] Calibrating delay loop (skipped), value calculated using timer frequency.. 3666.55 BogoMIPS (lpj=7333108)
[ 0.004000] Security Framework initialized
[ 0.004000] AppArmor: AppArmor initialized
[ 0.004000] Dentry cache hash table entries: 131072 (order: 8, 1048576 bytes)
[ 0.004000] Inode-cache hash table entries: 65536 (order: 7, 524288 bytes)
[ 0.004000] Mount-cache hash table entries: 256
[ 0.004000] Initializing cgroup subsys ns
[ 0.004000] Initializing cgroup subsys cpuacct
[ 0.004000] Initializing cgroup subsys memory
[ 0.004000] Initializing cgroup subsys freezer
[ 0.004000] Initializing cgroup subsys net_cls
[ 0.004000] CPU: L1 I cache: 32K, L1 D cache: 32K
[ 0.004000] CPU: L2 cache: 2048K
[ 0.004000] CPU 0/0x0 -> Node 0
[ 0.004000] CPU: Physical Processor ID: 0
[ 0.004000] CPU: Processor Core ID: 0
[ 0.004000] using mwait in idle threads.
[ 0.004000] Performance Counters: Core2 events, Intel PMU driver.
[ 0.004000] ... version: 2
[ 0.004000] ... bit width: 40
[ 0.004000] ... generic counters: 2
[ 0.004000] ... value mask: 000000ffffffffff
[ 0.004000] ... max period: 000000007fffffff
[ 0.004000] ... fixed-purpose counters: 3
[ 0.004000] ... counter mask: 0000000700000003
[ 0.004018] ACPI: Core revision 20090521
[ 0.020068] Setting APIC routing to flat
[ 0.020488] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[ 0.060975] CPU0: Intel(R) Core(TM)2 Duo CPU T5550 @ 1.83GHz stepping 0d
[ 0.064001] Booting processor 1 APIC 0x1 ip 0x6000
[ 0.004000] Initializing CPU#1
[ 0.004000] Calibrating delay using timer specific routine.. 3666.92 BogoMIPS (lpj=7333859)
[ 0.004000] CPU: L1 I cache: 32K, L1 D cache: 32K
[ 0.004000] CPU: L2 cache: 2048K
[ 0.004000] CPU 1/0x1 -> Node 0
[ 0.004000] CPU: Physical Processor ID: 0
[ 0.004000] CPU: Processor Core ID: 1
[ 0.148431] CPU1: Intel(R) Core(TM)2 Duo CPU T5550 @ 1.83GHz stepping 0d
[ 0.149078] checking TSC synchronization [CPU#0 -> CPU#1]: passed.
[ 0.152027] Brought up 2 CPUs
[ 0.152094] Total of 2 processors activated (7333.48 BogoMIPS).
[ 0.153417] CPU0 attaching sched-domain:
[ 0.153420] domain 0: span 0-1 level MC
[ 0.153423] groups: 0 1
[ 0.153429] CPU1 attaching sched-domain:
[ 0.153432] domain 0: span 0-1 level MC
[ 0.153434] groups: 1 0
[ 0.153519] Booting paravirtualized kernel on bare hardware
[ 0.153519] regulator: core version 0.5
[ 0.153519] Time: 0:31:46 Date: 08/08/09
[ 0.153519] NET: Registered protocol family 16
[ 0.156029] ACPI: bus type pci registered
[ 0.156101] PCI: MCFG configuration 0: base e0000000 segment 0 buses 0 - 255
[ 0.156119] PCI: MCFG area at e0000000 reserved in E820
[ 0.159059] PCI: Using MMCONFIG at e0000000 - efffffff
[ 0.159126] PCI: Using configuration type 1 for base access
[ 0.160098] bio: create slab <bio-0> at 0
[ 0.165091] ACPI: EC: Look up EC in DSDT
[ 0.169637] ACPI: BIOS _OSI(Linux) query ignored
[ 0.170994] ACPI: EC: non-query interrupt received, switching to interrupt mode
[ 0.684006] ACPI: EC: missing confirmations, switch off interrupt mode.
[ 1.140085] ACPI: Interpreter enabled
[ 1.140154] ACPI: (supports S0 S3 S4 S5)
[ 1.140443] ACPI: Using IOAPIC for interrupt routing
[ 1.204077] ACPI: EC: GPE = 0x18, I/O: command/status = 0x66, data = 0x62
[ 1.204149] ACPI: EC: driver started in poll mode
[ 1.204336] ACPI: No dock devices found.
[ 1.205029] ACPI Error (psargs-0359): [CDW1] Namespace lookup failure, AE_NOT_FOUND
[ 1.205214] ACPI Error (psparse-0537): Method parse/execution failed [\_SB_.PCI0._OSC] (Node ffff88003f9a8bc0), AE_NOT_FOUND
[ 1.205480] ACPI: PCI Root Bridge [PCI0] (0000:00)
[ 1.205581] pci 0000:00:01.0: PME# supported from D0 D3hot D3cold
[ 1.205581] pci 0000:00:01.0: PME# disabled
[ 1.205581] pci 0000:00:1a.0: reg 20 io port: [0x1800-0x181f]
[ 1.205581] pci 0000:00:1a.1: reg 20 io port: [0x1820-0x183f]
[ 1.205581] pci 0000:00:1a.7: reg 10 32bit mmio: [0xf3504800-0xf3504bff]
[ 1.205581] pci 0000:00:1a.7: PME# supported from D0 D3hot D3cold
[ 1.205581] pci 0000:00:1a.7: PME# disabled
[ 1.205581] pci 0000:00:1b.0: reg 10 64bit mmio: [0xf3500000-0xf3503fff]
[ 1.205581] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
[ 1.205581] pci 0000:00:1b.0: PME# disabled
[ 1.205581] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
[ 1.205581] pci 0000:00:1c.0: PME# disabled
[ 1.205581] pci 0000:00:1c.3: PME# supported from D0 D3hot D3cold
[ 1.205581] pci 0000:00:1c.3: PME# disabled
[ 1.205581] pci 0000:00:1c.5: PME# supported from D0 D3hot D3cold
[ 1.205581] pci 0000:00:1c.5: PME# disabled
[ 1.205702] pci 0000:00:1d.0: reg 20 io port: [0x1840-0x185f]
[ 1.205780] pci 0000:00:1d.1: reg 20 io port: [0x1860-0x187f]
[ 1.205863] pci 0000:00:1d.2: reg 20 io port: [0x1880-0x189f]
[ 1.205940] pci 0000:00:1d.7: reg 10 32bit mmio: [0xf3504c00-0xf3504fff]
[ 1.206005] pci 0000:00:1d.7: PME# supported from D0 D3hot D3cold
[ 1.206077] pci 0000:00:1d.7: PME# disabled
[ 1.208171] pci 0000:00:1f.0: quirk: region 1000-107f claimed by ICH6 ACPI/GPIO/TCO
[ 1.208255] pci 0000:00:1f.0: quirk: region 1180-11bf claimed by ICH6 GPIO
[ 1.208326] pci 0000:00:1f.0: ICH7 LPC Generic IO decode 1 PIO at 0680 (mask 007f)
[ 1.208409] pci 0000:00:1f.0: ICH7 LPC Generic IO decode 2 PIO at 0600 (mask 003f)
[ 1.208494] pci 0000:00:1f.0: ICH7 LPC Generic IO decode 4 PIO at 0068 (mask 0007)
[ 1.208624] pci 0000:00:1f.1: reg 10 io port: [0x00-0x07]
[ 1.208632] pci 0000:00:1f.1: reg 14 io port: [0x00-0x03]
[ 1.208641] pci 0000:00:1f.1: reg 18 io port: [0x00-0x07]
[ 1.208649] pci 0000:00:1f.1: reg 1c io port: [0x00-0x03]
[ 1.208657] pci 0000:00:1f.1: reg 20 io port: [0x18a0-0x18af]
[ 1.208732] pci 0000:00:1f.2: reg 10 io port: [0x18d8-0x18df]
[ 1.208740] pci 0000:00:1f.2: reg 14 io port: [0x18cc-0x18cf]
[ 1.208748] pci 0000:00:1f.2: reg 18 io port: [0x18d0-0x18d7]
[ 1.208756] pci 0000:00:1f.2: reg 1c io port: [0x18c8-0x18cb]
[ 1.208764] pci 0000:00:1f.2: reg 20 io port: [0x18e0-0x18ff]
[ 1.208773] pci 0000:00:1f.2: reg 24 32bit mmio: [0xf3504000-0xf35047ff]
[ 1.208816] pci 0000:00:1f.2: PME# supported from D3hot
[ 1.208886] pci 0000:00:1f.2: PME# disabled
[ 1.208982] pci 0000:00:1f.3: reg 10 32bit mmio: [0x000000-0x0000ff]
[ 1.209007] pci 0000:00:1f.3: reg 20 io port: [0x1c00-0x1c1f]
[ 1.209097] pci 0000:01:00.0: reg 10 32bit mmio: [0xf2000000-0xf2ffffff]
[ 1.209114] pci 0000:01:00.0: reg 14 64bit mmio: [0xd0000000-0xdfffffff]
[ 1.209131] pci 0000:01:00.0: reg 1c 64bit mmio: [0xf0000000-0xf1ffffff]
[ 1.209141] pci 0000:01:00.0: reg 24 io port: [0x2000-0x207f]
[ 1.209152] pci 0000:01:00.0: reg 30 32bit mmio: [0x000000-0x01ffff]
[ 1.209263] pci 0000:00:01.0: bridge io port: [0x2000-0x2fff]
[ 1.209267] pci 0000:00:01.0: bridge 32bit mmio: [0xf0000000-0xf2ffffff]
[ 1.209272] pci 0000:00:01.0: bridge 64bit mmio pref: [0xd0000000-0xdfffffff]
[ 1.209333] pci 0000:00:1c.0: bridge io port: [0x00-0xfff]
[ 1.209338] pci 0000:00:1c.0: bridge 32bit mmio: [0x000000-0x0fffff]
[ 1.209346] pci 0000:00:1c.0: bridge 64bit mmio pref: [0x000000-0x0fffff]
[ 1.209526] pci 0000:06:00.0: reg 10 32bit mmio: [0x000000-0x000fff]
[ 1.209761] pci 0000:06:00.0: PME# supported from D0 D3hot D3cold
[ 1.209840] pci 0000:06:00.0: PME# disabled
[ 1.210018] pci 0000:00:1c.3: bridge io port: [0x00-0xfff]
[ 1.210023] pci 0000:00:1c.3: bridge 32bit mmio: [0x000000-0x0fffff]
[ 1.210031] pci 0000:00:1c.3: bridge 64bit mmio pref: [0x000000-0x0fffff]
[ 1.210248] pci 0000:08:00.0: reg 10 64bit mmio: [0x000000-0x00ffff]
[ 1.210478] pci 0000:08:00.0: PME# supported from D3hot D3cold
[ 1.210561] pci 0000:08:00.0: PME# disabled
[ 1.210761] pci 0000:00:1c.5: bridge io port: [0x00-0xfff]
[ 1.210767] pci 0000:00:1c.5: bridge 32bit mmio: [0x000000-0x0fffff]
[ 1.210775] pci 0000:00:1c.5: bridge 64bit mmio pref: [0x000000-0x0fffff]
[ 1.210836] pci 0000:0a:09.0: reg 10 32bit mmio: [0xf3200000-0xf32007ff]
[ 1.210893] pci 0000:0a:09.0: supports D1 D2
[ 1.210896] pci 0000:0a:09.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 1.210970] pci 0000:0a:09.0: PME# disabled
[ 1.211077] pci 0000:0a:09.1: reg 10 32bit mmio: [0xf3200800-0xf32008ff]
[ 1.211140] pci 0000:0a:09.1: supports D1 D2
[ 1.211142] pci 0000:0a:09.1: PME# supported from D0 D1 D2 D3hot D3cold
[ 1.211215] pci 0000:0a:09.1: PME# disabled
[ 1.211325] pci 0000:0a:09.2: reg 10 32bit mmio: [0xf3200c00-0xf3200cff]
[ 1.211384] pci 0000:0a:09.2: supports D1 D2
[ 1.211387] pci 0000:0a:09.2: PME# supported from D0 D1 D2 D3hot D3cold
[ 1.211459] pci 0000:0a:09.2: PME# disabled
[ 1.211567] pci 0000:0a:09.3: reg 10 32bit mmio: [0xf3201000-0xf32010ff]
[ 1.211627] pci 0000:0a:09.3: supports D1 D2
[ 1.211630] pci 0000:0a:09.3: PME# supported from D0 D1 D2 D3hot D3cold
[ 1.211702] pci 0000:0a:09.3: PME# disabled
[ 1.211812] pci 0000:0a:09.4: reg 10 32bit mmio: [0xf3201400-0xf32014ff]
[ 1.211872] pci 0000:0a:09.4: supports D1 D2
[ 1.211874] pci 0000:0a:09.4: PME# supported from D0 D1 D2 D3hot D3cold
[ 1.211947] pci 0000:0a:09.4: PME# disabled
[ 1.212058] pci 0000:00:1e.0: transparent bridge
[ 1.212131] pci 0000:00:1e.0: bridge 32bit mmio: [0xf3200000-0xf32fffff]
[ 1.212170] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
[ 1.212415] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEGP._PRT]
[ 1.212506] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP01._PRT]
[ 1.212596] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP04._PRT]
[ 1.212674] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP06._PRT]
[ 1.212785] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCIB._PRT]
[ 1.212885] ACPI Error (psargs-0359): [CDW1] Namespace lookup failure, AE_NOT_FOUND
[ 1.213071] ACPI Error (psparse-0537): Method parse/execution failed [\_SB_.PCI0._OSC] (Node ffff88003f9a8bc0), AE_NOT_FOUND
[ 1.224658] ACPI: PCI Interrupt Link [LNKA] (IRQs 1 3 4 *5 6 7 10 12 14 15)
[ 1.224880] ACPI: PCI Interrupt Link [LNKB] (IRQs 1 3 4 5 6 7 11 12 14 15) *10
[ 1.225723] ACPI: PCI Interrupt Link [LNKC] (IRQs 1 3 4 5 6 7 *10 12 14 15)
[ 1.228681] ACPI: PCI Interrupt Link [LNKD] (IRQs 1 3 4 5 6 7 11 12 14 15) *10
[ 1.229523] ACPI: PCI Interrupt Link [LNKE] (IRQs 1 3 4 5 6 7 10 12 14 15) *0, disabled.
[ 1.230417] ACPI: PCI Interrupt Link [LNKF] (IRQs 1 3 4 5 6 7 *11 12 14 15)
[ 1.231202] ACPI: PCI Interrupt Link [LNKG] (IRQs 1 3 4 5 6 7 10 12 14 15) *11
[ 1.232064] ACPI: PCI Interrupt Link [LNKH] (IRQs 1 3 4 5 6 *7 11 12 14 15)
[ 1.232791] SCSI subsystem initialized
[ 1.232791] libata version 3.00 loaded.
[ 1.232791] usbcore: registered new interface driver usbfs
[ 1.232791] usbcore: registered new interface driver hub
[ 1.232791] usbcore: registered new device driver usb
[ 1.232791] ACPI: WMI: Mapper loaded
[ 1.232791] PCI: Using ACPI for IRQ routing
[ 1.232791] pci 0000:00:1c.0: BAR 13: can't allocate resource
[ 1.232791] pci 0000:00:1c.0: BAR 14: can't allocate resource
[ 1.232791] pci 0000:00:1c.0: BAR 15: can't allocate resource
[ 1.232791] pci 0000:00:1c.3: BAR 13: can't allocate resource
[ 1.232791] pci 0000:00:1c.3: BAR 14: can't allocate resource
[ 1.232791] pci 0000:00:1c.3: BAR 15: can't allocate resource
[ 1.232791] pci 0000:00:1c.5: BAR 13: can't allocate resource
[ 1.232791] pci 0000:00:1c.5: BAR 14: can't allocate resource
[ 1.232791] pci 0000:00:1c.5: BAR 15: can't allocate resource
[ 1.248011] Bluetooth: Core ver 2.15
[ 1.248096] NET: Registered protocol family 31
[ 1.248096] Bluetooth: HCI device and connection manager initialized
[ 1.248162] Bluetooth: HCI socket layer initialized
[ 1.248231] NET: Registered protocol family 8
[ 1.248297] NET: Registered protocol family 20
[ 1.248384] NetLabel: Initializing
[ 1.248384] NetLabel: domain hash size = 128
[ 1.248384] NetLabel: protocols = UNLABELED CIPSOv4
[ 1.248384] NetLabel: unlabeled traffic allowed by default
[ 1.248384] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0
[ 1.248384] hpet0: 3 comparators, 64-bit 14.318180 MHz counter
[ 1.256017] Switched to high resolution mode on CPU 0
[ 1.257217] Switched to high resolution mode on CPU 1
[ 1.272011] pnp: PnP ACPI init
[ 1.272091] ACPI: bus type pnp registered
[ 1.274926] pnp: PnP ACPI: found 11 devices
[ 1.274995] ACPI: ACPI bus type pnp unregistered
[ 1.275073] system 00:01: iomem range 0xfed1c000-0xfed1ffff has been reserved
[ 1.275144] system 00:01: iomem range 0xfed14000-0xfed17fff has been reserved
[ 1.275216] system 00:01: iomem range 0xfed18000-0xfed18fff has been reserved
[ 1.275288] system 00:01: iomem range 0xfed19000-0xfed19fff has been reserved
[ 1.275359] system 00:01: iomem range 0xe0000000-0xefffffff has been reserved
[ 1.275430] system 00:01: iomem range 0xfed20000-0xfed3ffff has been reserved
[ 1.275501] system 00:01: iomem range 0xfed40000-0xfed44fff has been reserved
[ 1.275573] system 00:01: iomem range 0xfed45000-0xfed8ffff has been reserved
[ 1.275649] system 00:04: iomem range 0xfed00000-0xfed003ff has been reserved
[ 1.275726] system 00:06: ioport range 0x680-0x69f has been reserved
[ 1.275796] system 00:06: ioport range 0x800-0x80f has been reserved
[ 1.275866] system 00:06: ioport range 0x1000-0x107f has been reserved
[ 1.275936] system 00:06: ioport range 0x1180-0x11bf has been reserved
[ 1.276014] system 00:06: ioport range 0x1640-0x164f has been reserved
[ 1.276085] system 00:06: ioport range 0xfe00-0xfe00 has been reserved
[ 1.281184] AppArmor: AppArmor Filesystem Enabled
[ 1.281343] pci 0000:01:00.0: BAR 6: can't allocate mem resource [0xe0000000-0xdfffffff]
[ 1.281427] pci 0000:00:01.0: PCI bridge, secondary bus 0000:01
[ 1.281497] pci 0000:00:01.0: IO window: 0x2000-0x2fff
[ 1.281568] pci 0000:00:01.0: MEM window: 0xf0000000-0xf2ffffff
[ 1.281639] pci 0000:00:01.0: PREFETCH window: 0x000000d0000000-0x000000dfffffff
[ 1.281725] pci 0000:00:1c.0: PCI bridge, secondary bus 0000:02
[ 1.281794] pci 0000:00:1c.0: IO window: disabled
[ 1.281866] pci 0000:00:1c.0: MEM window: disabled
[ 1.281936] pci 0000:00:1c.0: PREFETCH window: disabled
[ 1.282059] pci 0000:00:1c.3: PCI bridge, secondary bus 0000:06
[ 1.282127] pci 0000:00:1c.3: IO window: disabled
[ 1.282199] pci 0000:00:1c.3: MEM window: 0x40000000-0x400fffff
[ 1.282271] pci 0000:00:1c.3: PREFETCH window: disabled
[ 1.282396] pci 0000:00:1c.5: PCI bridge, secondary bus 0000:08
[ 1.282465] pci 0000:00:1c.5: IO window: disabled
[ 1.282537] pci 0000:00:1c.5: MEM window: 0x40100000-0x401fffff
[ 1.282609] pci 0000:00:1c.5: PREFETCH window: disabled
[ 1.282681] pci 0000:00:1e.0: PCI bridge, secondary bus 0000:0a
[ 1.282750] pci 0000:00:1e.0: IO window: disabled
[ 1.282822] pci 0000:00:1e.0: MEM window: 0xf3200000-0xf32fffff
[ 1.282894] pci 0000:00:1e.0: PREFETCH window: disabled
[ 1.282973] alloc irq_desc for 16 on node 0
[ 1.282975] alloc kstat_irqs on node 0
[ 1.282980] pci 0000:00:01.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 1.283053] pci 0000:00:01.0: setting latency timer to 64
[ 1.283061] alloc irq_desc for 17 on node 0
[ 1.283063] alloc kstat_irqs on node 0
[ 1.283067] pci 0000:00:1c.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
[ 1.283141] pci 0000:00:1c.0: setting latency timer to 64
[ 1.283150] pci 0000:00:1c.3: enabling device (0000 -> 0002)
[ 1.283221] alloc irq_desc for 19 on node 0
[ 1.283222] alloc kstat_irqs on node 0
[ 1.283226] pci 0000:00:1c.3: PCI INT D -> GSI 19 (level, low) -> IRQ 19
[ 1.283300] pci 0000:00:1c.3: setting latency timer to 64
[ 1.283308] pci 0000:00:1c.5: enabling device (0000 -> 0002)
[ 1.283379] pci 0000:00:1c.5: PCI INT B -> GSI 16 (level, low) -> IRQ 16
[ 1.283453] pci 0000:00:1c.5: setting latency timer to 64
[ 1.283461] pci 0000:00:1e.0: setting latency timer to 64
[ 1.283466] pci_bus 0000:00: resource 0 io: [0x00-0xffff]
[ 1.283470] pci_bus 0000:00: resource 1 mem: [0x000000-0xffffffffffffffff]
[ 1.283473] pci_bus 0000:01: resource 0 io: [0x2000-0x2fff]
[ 1.283475] pci_bus 0000:01: resource 1 mem: [0xf0000000-0xf2ffffff]
[ 1.283478] pci_bus 0000:01: resource 2 pref mem [0xd0000000-0xdfffffff]
[ 1.283481] pci_bus 0000:02: resource 0 mem: [0x0-0xfff]
[ 1.283483] pci_bus 0000:02: resource 1 mem: [0x0-0xfffff]
[ 1.283486] pci_bus 0000:02: resource 2 mem: [0x0-0xfffff]
[ 1.283488] pci_bus 0000:06: resource 0 mem: [0x0-0xfff]
[ 1.283491] pci_bus 0000:06: resource 1 mem: [0x40000000-0x400fffff]
[ 1.283494] pci_bus 0000:06: resource 2 mem: [0x0-0xfffff]
[ 1.283496] pci_bus 0000:08: resource 0 mem: [0x0-0xfff]
[ 1.283499] pci_bus 0000:08: resource 1 mem: [0x40100000-0x401fffff]
[ 1.283501] pci_bus 0000:08: resource 2 mem: [0x0-0xfffff]
[ 1.283504] pci_bus 0000:0a: resource 1 mem: [0xf3200000-0xf32fffff]
[ 1.283506] pci_bus 0000:0a: resource 3 io: [0x00-0xffff]
[ 1.283509] pci_bus 0000:0a: resource 4 mem: [0x000000-0xffffffffffffffff]
[ 1.283550] NET: Registered protocol family 2
[ 1.283749] IP route cache hash table entries: 32768 (order: 6, 262144 bytes)
[ 1.284443] TCP established hash table entries: 131072 (order: 9, 2097152 bytes)
[ 1.285650] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
[ 1.286529] TCP: Hash tables configured (established 131072 bind 65536)
[ 1.286599] TCP reno registered
[ 1.286811] NET: Registered protocol family 1
[ 1.286970] Trying to unpack rootfs image as initramfs...
[ 1.481259] Freeing initrd memory: 7359k freed
[ 1.486931] Simple Boot Flag at 0x35 set to 0x1
[ 1.487556] Scanning for low memory corruption every 60 seconds
[ 1.487960] audit: initializing netlink socket (disabled)
[ 1.488060] type=2000 audit(1249691507.488:1): initialized
[ 1.498788] HugeTLB registered 2 MB page size, pre-allocated 0 pages
[ 1.502035] VFS: Disk quotas dquot_6.5.2
[ 1.502202] Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[ 1.503468] fuse init (API version 7.12)
[ 1.503711] msgmni has been set to 1996
[ 1.504212] alg: No test for stdrng (krng)
[ 1.504289] io scheduler noop registered
[ 1.504357] io scheduler anticipatory registered
[ 1.504425] io scheduler deadline registered
[ 1.505773] io scheduler cfq registered (default)
[ 1.506008] pci 0000:01:00.0: Boot video device
[ 1.506199] alloc irq_desc for 24 on node 0
[ 1.506202] alloc kstat_irqs on node 0
[ 1.506213] pcieport-driver 0000:00:01.0: irq 24 for MSI/MSI-X
[ 1.506220] pcieport-driver 0000:00:01.0: setting latency timer to 64
[ 1.506476] alloc irq_desc for 25 on node 0
[ 1.506479] alloc kstat_irqs on node 0
[ 1.506489] pcieport-driver 0000:00:1c.0: irq 25 for MSI/MSI-X
[ 1.506501] pcieport-driver 0000:00:1c.0: setting latency timer to 64
[ 1.506787] alloc irq_desc for 26 on node 0
[ 1.506789] alloc kstat_irqs on node 0
[ 1.506799] pcieport-driver 0000:00:1c.3: irq 26 for MSI/MSI-X
[ 1.506811] pcieport-driver 0000:00:1c.3: setting latency timer to 64
[ 1.507090] alloc irq_desc for 27 on node 0
[ 1.507092] alloc kstat_irqs on node 0
[ 1.507102] pcieport-driver 0000:00:1c.5: irq 27 for MSI/MSI-X
[ 1.507114] pcieport-driver 0000:00:1c.5: setting latency timer to 64
[ 1.507377] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[ 1.507520] ACPI Error (psargs-0359): [CDW1] Namespace lookup failure, AE_NOT_FOUND
[ 1.507714] ACPI Error (psparse-0537): Method parse/execution failed [\_SB_.PCI0._OSC] (Node ffff88003f9a8bc0), AE_NOT_FOUND
[ 1.508047] ACPI Error (psargs-0359): [CDW1] Namespace lookup failure, AE_NOT_FOUND
[ 1.508239] ACPI Error (psparse-0537): Method parse/execution failed [\_SB_.PCI0._OSC] (Node ffff88003f9a8bc0), AE_NOT_FOUND
[ 1.508554] ACPI Error (psargs-0359): [CDW1] Namespace lookup failure, AE_NOT_FOUND
[ 1.508746] ACPI Error (psparse-0537): Method parse/execution failed [\_SB_.PCI0._OSC] (Node ffff88003f9a8bc0), AE_NOT_FOUND
[ 1.509059] ACPI Error (psargs-0359): [CDW1] Namespace lookup failure, AE_NOT_FOUND
[ 1.509250] ACPI Error (psparse-0537): Method parse/execution failed [\_SB_.PCI0._OSC] (Node ffff88003f9a8bc0), AE_NOT_FOUND
[ 1.509644] ACPI Error (psargs-0359): [CDW1] Namespace lookup failure, AE_NOT_FOUND
[ 1.509835] ACPI Error (psparse-0537): Method parse/execution failed [\_SB_.PCI0._OSC] (Node ffff88003f9a8bc0), AE_NOT_FOUND
[ 1.510149] ACPI Error (psargs-0359): [CDW1] Namespace lookup failure, AE_NOT_FOUND
[ 1.510342] ACPI Error (psparse-0537): Method parse/execution failed [\_SB_.PCI0._OSC] (Node ffff88003f9a8bc0), AE_NOT_FOUND
[ 1.510654] ACPI Error (psargs-0359): [CDW1] Namespace lookup failure, AE_NOT_FOUND
[ 1.510845] ACPI Error (psparse-0537): Method parse/execution failed [\_SB_.PCI0._OSC] (Node ffff88003f9a8bc0), AE_NOT_FOUND
[ 1.511157] ACPI Error (psargs-0359): [CDW1] Namespace lookup failure, AE_NOT_FOUND
[ 1.511350] ACPI Error (psparse-0537): Method parse/execution failed [\_SB_.PCI0._OSC] (Node ffff88003f9a8bc0), AE_NOT_FOUND
[ 1.511669] pciehp: PCI Express Hot Plug Controller Driver version: 0.4
[ 1.564128] ACPI: AC Adapter [ACAD] (on-line)
[ 1.564322] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input0
[ 1.564408] ACPI: Power Button [PWRF]
[ 1.564570] input: Lid Switch as /devices/LNXSYSTM:00/device:00/PNP0C0D:00/input/input1
[ 1.564719] ACPI: Lid Switch [LID]
[ 1.564865] input: Power Button as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input2
[ 1.564950] ACPI: Power Button [PWRB]
[ 1.565094] input: Sleep Button as /devices/LNXSYSTM:00/device:00/PNP0C0E:00/input/input3
[ 1.565179] ACPI: Sleep Button [SLPB]
[ 1.566013] ACPI: SSDT 000000003fed481a 001F6 (v01 PmRef Cpu0Ist 00003000 INTL 20050624)
[ 1.566754] ACPI: SSDT 000000003fed419e 005F7 (v01 PmRef Cpu0Cst 00003001 INTL 20050624)
[ 1.569205] ACPI Warning: Invalid throttling state, reset 20090521 processor_throttling-843
[ 1.569784] Monitor-Mwait will be used to enter C-1 state
[ 1.569810] Monitor-Mwait will be used to enter C-2 state
[ 1.569832] Monitor-Mwait will be used to enter C-3 state
[ 1.569838] Marking TSC unstable due to TSC halts in idle
[ 1.569956] ACPI: CPU0 (power states: C1[C1] C2[C2] C3[C3])
[ 1.570292] processor LNXCPU:00: registered as cooling_device0
[ 1.570365] ACPI: Processor [CPU0] (supports 8 throttling states)
[ 1.570933] ACPI: SSDT 000000003fed4a10 000C8 (v01 PmRef Cpu1Ist 00003000 INTL 20050624)
[ 1.571508] ACPI: SSDT 000000003fed4795 00085 (v01 PmRef Cpu1Cst 00003000 INTL 20050624)
[ 1.572270] ACPI Warning: Invalid throttling state, reset 20090521 processor_throttling-843
[ 1.572986] ACPI: CPU1 (power states: C1[C1] C2[C2] C3[C3])
[ 1.573332] processor LNXCPU:01: registered as cooling_device1
[ 1.573405] ACPI: Processor [CPU1] (supports 8 throttling states)
[ 1.796068] thermal LNXTHERM:01: registered as thermal_zone0
[ 1.796146] ACPI: Thermal Zone [THRM] (74 C)
[ 1.796382] ACPI: Battery Slot [BAT1] (battery absent)
[ 1.800076] Linux agpgart interface v0.103
[ 1.800149] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
[ 1.800539] Platform driver 'serial8250' needs updating - please use dev_pm_ops
[ 1.803008] brd: module loaded
[ 1.804095] loop: module loaded
[ 1.804353] input: Macintosh mouse button emulation as /devices/virtual/input/input4
[ 1.804696] ahci 0000:00:1f.2: version 3.0
[ 1.804717] ahci 0000:00:1f.2: PCI INT B -> GSI 19 (level, low) -> IRQ 19
[ 1.804835] alloc irq_desc for 28 on node 0
[ 1.804837] alloc kstat_irqs on node 0
[ 1.804851] ahci 0000:00:1f.2: irq 28 for MSI/MSI-X
[ 1.804924] ahci 0000:00:1f.2: AHCI 0001.0100 32 slots 3 ports 3 Gbps 0x7 impl SATA mode
[ 1.805014] ahci 0000:00:1f.2: flags: 64bit ncq sntf pm led clo pio slum part
[ 1.805102] ahci 0000:00:1f.2: setting latency timer to 64
[ 1.805392] scsi0 : ahci
[ 1.805652] scsi1 : ahci
[ 1.805856] scsi2 : ahci
[ 1.806134] ata1: SATA max UDMA/133 abar m2048@0xf3504000 port 0xf3504100 irq 28
[ 1.806219] ata2: SATA max UDMA/133 abar m2048@0xf3504000 port 0xf3504180 irq 28
[ 1.806303] ata3: SATA max UDMA/133 abar m2048@0xf3504000 port 0xf3504200 irq 28
[ 1.806570] ata_piix 0000:00:1f.1: version 2.13
[ 1.806580] ata_piix 0000:00:1f.1: PCI INT A -> GSI 19 (level, low) -> IRQ 19
[ 1.806694] ata_piix 0000:00:1f.1: setting latency timer to 64
[ 1.806777] scsi3 : ata_piix
[ 1.806986] scsi4 : ata_piix
[ 1.807821] ata4: PATA max UDMA/100 cmd 0x1f0 ctl 0x3f6 bmdma 0x18a0 irq 14
[ 1.807895] ata5: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0x18a8 irq 15
[ 1.810393] Fixed MDIO Bus: probed
[ 1.810467] PPP generic driver version 2.4.2
[ 1.810777] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 1.810903] alloc irq_desc for 18 on node 0
[ 1.810906] alloc kstat_irqs on node 0
[ 1.810913] ehci_hcd 0000:00:1a.7: PCI INT C -> GSI 18 (level, low) -> IRQ 18
[ 1.811003] ehci_hcd 0000:00:1a.7: setting latency timer to 64
[ 1.811007] ehci_hcd 0000:00:1a.7: EHCI Host Controller
[ 1.811147] ehci_hcd 0000:00:1a.7: new USB bus registered, assigned bus number 1
[ 1.815148] ehci_hcd 0000:00:1a.7: debug port 1
[ 1.815223] ehci_hcd 0000:00:1a.7: cache line size of 32 is not supported
[ 1.815240] ehci_hcd 0000:00:1a.7: irq 18, io mem 0xf3504800
[ 1.832099] ehci_hcd 0000:00:1a.7: USB 2.0 started, EHCI 1.00
[ 1.832303] usb usb1: configuration #1 chosen from 1 choice
[ 1.832442] hub 1-0:1.0: USB hub found
[ 1.832518] hub 1-0:1.0: 4 ports detected
[ 1.832682] alloc irq_desc for 23 on node 0
[ 1.832685] alloc kstat_irqs on node 0
[ 1.832691] ehci_hcd 0000:00:1d.7: PCI INT A -> GSI 23 (level, low) -> IRQ 23
[ 1.832775] ehci_hcd 0000:00:1d.7: setting latency timer to 64
[ 1.832779] ehci_hcd 0000:00:1d.7: EHCI Host Controller
[ 1.832918] ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 2
[ 1.836908] ehci_hcd 0000:00:1d.7: debug port 1
[ 1.836983] ehci_hcd 0000:00:1d.7: cache line size of 32 is not supported
[ 1.836998] ehci_hcd 0000:00:1d.7: irq 23, io mem 0xf3504c00
[ 1.852013] ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00
[ 1.852192] usb usb2: configuration #1 chosen from 1 choice
[ 1.852323] hub 2-0:1.0: USB hub found
[ 1.852398] hub 2-0:1.0: 6 ports detected
[ 1.852569] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[ 1.852689] uhci_hcd: USB Universal Host Controller Interface driver
[ 1.852887] uhci_hcd 0000:00:1a.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 1.852967] uhci_hcd 0000:00:1a.0: setting latency timer to 64
[ 1.852971] uhci_hcd 0000:00:1a.0: UHCI Host Controller
[ 1.853112] uhci_hcd 0000:00:1a.0: new USB bus registered, assigned bus number 3
[ 1.853233] uhci_hcd 0000:00:1a.0: irq 16, io base 0x00001800
[ 1.853419] usb usb3: configuration #1 chosen from 1 choice
[ 1.853552] hub 3-0:1.0: USB hub found
[ 1.853625] hub 3-0:1.0: 2 ports detected
[ 1.853775] alloc irq_desc for 21 on node 0
[ 1.853778] alloc kstat_irqs on node 0
[ 1.853783] uhci_hcd 0000:00:1a.1: PCI INT B -> GSI 21 (level, low) -> IRQ 21
[ 1.853861] uhci_hcd 0000:00:1a.1: setting latency timer to 64
[ 1.853865] uhci_hcd 0000:00:1a.1: UHCI Host Controller
[ 1.854003] uhci_hcd 0000:00:1a.1: new USB bus registered, assigned bus number 4
[ 1.854122] uhci_hcd 0000:00:1a.1: irq 21, io base 0x00001820
[ 1.854314] usb usb4: configuration #1 chosen from 1 choice
[ 1.854448] hub 4-0:1.0: USB hub found
[ 1.854523] hub 4-0:1.0: 2 ports detected
[ 1.854674] uhci_hcd 0000:00:1d.0: PCI INT A -> GSI 23 (level, low) -> IRQ 23
[ 1.854752] uhci_hcd 0000:00:1d.0: setting latency timer to 64
[ 1.854756] uhci_hcd 0000:00:1d.0: UHCI Host Controller
[ 1.854895] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 5
[ 1.855007] uhci_hcd 0000:00:1d.0: irq 23, io base 0x00001840
[ 1.855206] usb usb5: configuration #1 chosen from 1 choice
[ 1.855338] hub 5-0:1.0: USB hub found
[ 1.855411] hub 5-0:1.0: 2 ports detected
[ 1.855563] uhci_hcd 0000:00:1d.1: PCI INT B -> GSI 19 (level, low) -> IRQ 19
[ 1.855641] uhci_hcd 0000:00:1d.1: setting latency timer to 64
[ 1.855645] uhci_hcd 0000:00:1d.1: UHCI Host Controller
[ 1.855781] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 6
[ 1.855901] uhci_hcd 0000:00:1d.1: irq 19, io base 0x00001860
[ 1.856100] usb usb6: configuration #1 chosen from 1 choice
[ 1.856230] hub 6-0:1.0: USB hub found
[ 1.856304] hub 6-0:1.0: 2 ports detected
[ 1.856454] uhci_hcd 0000:00:1d.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18
[ 1.856532] uhci_hcd 0000:00:1d.2: setting latency timer to 64
[ 1.856536] uhci_hcd 0000:00:1d.2: UHCI Host Controller
[ 1.856667] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 7
[ 1.856778] uhci_hcd 0000:00:1d.2: irq 18, io base 0x00001880
[ 1.856969] usb usb7: configuration #1 chosen from 1 choice
[ 1.857102] hub 7-0:1.0: USB hub found
[ 1.857176] hub 7-0:1.0: 2 ports detected
[ 1.857440] PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12
[ 1.857535] Platform driver 'i8042' needs updating - please use dev_pm_ops
[ 1.859318] i8042.c: Detected active multiplexing controller, rev 1.1.
[ 1.860717] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 1.860791] serio: i8042 AUX0 port at 0x60,0x64 irq 12
[ 1.860862] serio: i8042 AUX1 port at 0x60,0x64 irq 12
[ 1.860935] serio: i8042 AUX2 port at 0x60,0x64 irq 12
[ 1.861018] serio: i8042 AUX3 port at 0x60,0x64 irq 12
[ 1.861372] mice: PS/2 mouse device common for all mice
[ 1.861910] rtc_cmos 00:07: RTC can wake from S4
[ 1.862057] rtc_cmos 00:07: rtc core: registered rtc_cmos as rtc0
[ 1.862159] rtc0: alarms up to one month, y3k, 242 bytes nvram, hpet irqs
[ 1.862434] device-mapper: uevent: version 1.0.3
[ 1.862656] device-mapper: ioctl: 4.15.0-ioctl (2009-04-01) initialised: dm-devel@redhat.com
[ 1.862829] device-mapper: multipath: version 1.1.0 loaded
[ 1.862903] device-mapper: multipath round-robin: version 1.0.0 loaded
[ 1.864684] cpuidle: using governor ladder
[ 1.865399] cpuidle: using governor menu
[ 1.865963] TCP cubic registered
[ 1.866346] NET: Registered protocol family 10
[ 1.866927] lo: Disabled Privacy Extensions
[ 1.867311] NET: Registered protocol family 17
[ 1.867460] Bluetooth: L2CAP ver 2.13
[ 1.867529] Bluetooth: L2CAP socket layer initialized
[ 1.867601] Bluetooth: SCO (Voice Link) ver 0.6
[ 1.867671] Bluetooth: SCO socket layer initialized
[ 1.867783] Bluetooth: RFCOMM socket layer initialized
[ 1.867864] Bluetooth: RFCOMM TTY layer initialized
[ 1.867933] Bluetooth: RFCOMM ver 1.11
[ 1.868982] PM: Resume from disk failed.
[ 1.868997] registered taskstats version 1
[ 1.869251] Magic number: 5:87:506
[ 1.869429] rtc_cmos 00:07: setting system clock to 2009-08-08 00:31:48 UTC (1249691508)
[ 1.869514] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
[ 1.869585] EDD information not available.
[ 1.893725] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input5
[ 1.988439] ata4.00: ATAPI: TSSTcorp CDDVDW TS-L632H, AC01, max UDMA/33
[ 2.001065] Clocksource tsc unstable (delta = -94834812 ns)
[ 2.021328] ata4.00: configured for UDMA/33
[ 2.124096] ata2: SATA link down (SStatus 0 SControl 300)
[ 2.124196] ata3: SATA link down (SStatus 0 SControl 300)
[ 2.140105] usb 1-2: new high speed USB device using ehci_hcd and address 2
[ 2.281326] usb 1-2: configuration #1 chosen from 1 choice
[ 2.460078] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[ 2.460835] ACPI Warning: \_SB_.PCI0.SATA.PRT0._GTF: Return type mismatch - found Integer, expected Buffer 20090521 nspredef-940
[ 2.461026] ata1.00: _GTF unexpected object type 0x1
[ 2.504058] usb 2-4: new high speed USB device using ehci_hcd and address 3
[ 2.637238] usb 2-4: configuration #1 chosen from 1 choice
[ 2.838958] ata1.00: ATA-8: TOSHIBA MK1646GSX, LB113J, max UDMA/100
[ 2.839035] ata1.00: 312581808 sectors, multi 16: LBA48 NCQ (depth 31/32)
[ 2.840158] ata1.00: _GTF unexpected object type 0x1
[ 2.840375] ata1.00: configured for UDMA/100
[ 2.856206] scsi 0:0:0:0: Direct-Access ATA TOSHIBA MK1646GS LB11 PQ: 0 ANSI: 5
[ 2.856721] sd 0:0:0:0: [sda] 312581808 512-byte logical blocks: (160 GB/149 GiB)
[ 2.856848] sd 0:0:0:0: [sda] Write Protect is off
[ 2.856917] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 2.856943] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 2.857159] sda:
[ 2.857372] sd 0:0:0:0: Attached scsi generic sg0 type 0
[ 2.861255] scsi 3:0:0:0: CD-ROM TSSTcorp CDDVDW TS-L632H AC01 PQ: 0 ANSI: 5
[ 2.876065] sr0: scsi3-mmc drive: 24x/24x writer dvd-ram cd/rw xa/form2 cdda tray
[ 2.876156] Uniform CD-ROM driver Revision: 3.20
[ 2.876479] sr 3:0:0:0: Attached scsi CD-ROM sr0
[ 2.876674] sr 3:0:0:0: Attached scsi generic sg1 type 5
[ 2.880049] usb 6-1: new full speed USB device using uhci_hcd and address 2
[ 2.911367] sda1 sda2 sda3 sda4
[ 2.934210] sd 0:0:0:0: [sda] Attached SCSI disk
[ 2.934312] Freeing unused kernel memory: 652k freed
[ 2.934630] Write protecting the kernel read-only data: 7508k
[ 3.054172] usb 6-1: configuration #1 chosen from 1 choice
[ 3.073560] [drm] Initialized drm 1.1.0 20060810
[ 3.088967] nouveau 0000:01:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 3.089052] nouveau 0000:01:00.0: setting latency timer to 64
[ 3.092681] nouveau 0000:01:00.0: Detected an NV50 generation card (0x086500a2)
[ 3.093170] nouveau 0000:01:00.0: Attempting to load BIOS image from PRAMIN
[ 3.179340] nouveau 0000:01:00.0: ... appears to be valid
[ 3.179410] nouveau 0000:01:00.0: BIT BIOS found
[ 3.179477] nouveau 0000:01:00.0: Bios version 60.86.54.00
[ 3.179548] nouveau 0000:01:00.0: TMDS table revision 2.0 not currently supported
[ 3.179630] nouveau 0000:01:00.0: Found Display Configuration Block version 4.0
[ 3.179710] nouveau 0000:01:00.0: Raw DCB entry 0: 01010323 00000034
[ 3.179780] nouveau 0000:01:00.0: G80+ LVDS not initialized by driver; ignoring conf bits
[ 3.179862] nouveau 0000:01:00.0: Raw DCB entry 1: 02001300 00000028
[ 3.179931] nouveau 0000:01:00.0: Raw DCB entry 2: 02022312 00020010
[ 3.180013] nouveau 0000:01:00.0: Raw DCB entry 3: 010333f1 00c0c080
[ 3.180084] nouveau 0000:01:00.0: Raw DCB entry 4: 0000000e 00000000
[ 3.180161] nouveau 0000:01:00.0: Parsing VBIOS init table 0 at offset 0xCDF0
[ 3.203180] nouveau 0000:01:00.0: Parsing VBIOS init table 1 at offset 0xD167
[ 3.219177] nouveau 0000:01:00.0: Parsing VBIOS init table 2 at offset 0xDDA8
[ 3.219252] nouveau 0000:01:00.0: Parsing VBIOS init table 3 at offset 0xDE9A
[ 3.220352] nouveau 0000:01:00.0: Parsing VBIOS init table 4 at offset 0xE094
[ 3.220422] nouveau 0000:01:00.0: Parsing VBIOS init table at offset 0xE0F9
[ 5.204697] nouveau 0000:01:00.0: 0xE0F9: Condition still not met after 0ms, skiping following opcodes
[ 5.204786] nouveau 0000:01:00.0: Table 0x0001 not found for 3/1, using first
[ 5.204858] nouveau 0000:01:00.0: 0xB770: parsing output script 0
[ 5.204928] nouveau 0000:01:00.0: 0xB8E6: parsing output script 0
[ 5.204999] nouveau 0000:01:00.0: 0xAF3E: parsing output script 0
[ 5.336806] [TTM] TTM available graphics memory: 499 MiB
[ 5.336881] [TTM] TTM available object memory: 499 MiB
[ 5.375880] nouveau 0000:01:00.0: Allocating FIFO number 1
[ 5.391453] nouveau 0000:01:00.0: nouveau_fifo_alloc: initialised FIFO 1
[ 5.392325] nouveau 0000:01:00.0: Detected a LVDS output
[ 5.392404] nouveau 0000:01:00.0: Detected a DAC output
[ 5.392477] nouveau 0000:01:00.0: Detected a TMDS output
[ 5.392550] nouveau 0000:01:00.0: DCB encoder 1 unknown
[ 5.392623] nouveau 0000:01:00.0: Detected a LVDS connector
[ 5.392970] nouveau 0000:01:00.0: Detected a VGA connector
[ 5.393244] nouveau 0000:01:00.0: Detected a DVI-D connector
[ 6.515454] allocated 1280x800 fb: 0x40230000, bo ffff88002f8f8e00
[ 6.517121] Console: switching to colour frame buffer device 160x50
[ 6.517146] [drm] LVDS-7: set mode 1280x800 e
[ 6.518035] fb0: nouveaufb frame buffer device
[ 6.518050] registered panic notifier
[ 6.518067] [drm] Initialized nouveau 0.0.15 v2.6.31-rc3-155-g87f364e232f92ab34 for 0000:01:00.0 on minor 0
[ 6.518273] nouveau 0000:01:00.0: Table 0x0001 not found for 3/1, using first
[ 6.518285] nouveau 0000:01:00.0: 0xB774: parsing output script 1
[ 6.518306] nouveau 0000:01:00.0: Table 0x0001 not found for 3/1, using first
[ 6.518324] nouveau 0000:01:00.0: Table 0x0001 not found for 3/1, using first
[ 6.518333] nouveau 0000:01:00.0: 0xB5D5: parsing clock script 0
[ 6.534480] nouveau 0000:01:00.0: Table 0x0001 not found for 3/1, using first
[ 6.534494] nouveau 0000:01:00.0: 0xB733: parsing clock script 1
[ 6.607233] tg3.c:v3.99 (April 20, 2009)
[ 6.607311] tg3 0000:08:00.0: enabling device (0000 -> 0002)
[ 6.607332] tg3 0000:08:00.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
[ 6.607364] tg3 0000:08:00.0: setting latency timer to 64
[ 6.612149] tg3 0000:08:00.0: wake-up capability disabled by ACPI
[ 6.612219] tg3 0000:08:00.0: PME# disabled
[ 6.612762] usbcore: registered new interface driver hiddev
[ 6.618937] Initializing USB Mass Storage driver...
[ 6.622334] input: Logitech USB Receiver as /devices/pci0000:00/0000:00:1d.1/usb6/6-1/6-1:1.0/input/input6
[ 6.622610] generic-usb 0003:046D:C526.0001: input,hidraw0: USB HID v1.11 Mouse [Logitech USB Receiver] on usb-0000:00:1d.1-1/input0
[ 6.626708] scsi5 : SCSI emulation for USB Mass Storage devices
[ 6.627007] usbcore: registered new interface driver usb-storage
[ 6.627214] USB Mass Storage support registered.
[ 6.627626] input: Logitech USB Receiver as /devices/pci0000:00/0000:00:1d.1/usb6/6-1/6-1:1.1/input/input7
[ 6.627949] generic-usb 0003:046D:C526.0002: input,hiddev96,hidraw1: USB HID v1.11 Device [Logitech USB Receiver] on usb-0000:00:1d.1-1/input1
[ 6.628190] usbcore: registered new interface driver usbhid
[ 6.628576] usbhid: v2.6:USB HID core driver
[ 6.634192] usb-storage: device found at 3
[ 6.634196] usb-storage: waiting for device to settle before scanning
[ 6.648737] eth0: Tigon3 [partno(BCM95787m) rev b002] (PCI Express) MAC address 00:1e:68:17:d7:0e
[ 6.648976] eth0: attached PHY is 5787 (10/100/1000Base-T Ethernet) (WireSpeed[1])
[ 6.649186] eth0: RXcsums[1] LinkChgREG[0] MIirq[0] ASF[0] TSOcap[1]
[ 6.649615] eth0: dma_rwctrl[76180000] dma_mask[64-bit]
[ 6.670988] ohci1394 0000:0a:09.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 6.734087] ohci1394: fw-host0: OHCI-1394 1.1 (PCI): IRQ=[16] MMIO=[f3200000-f32007ff] Max Packet=[2048] IR/IT contexts=[4/4]
[ 8.009249] ieee1394: Host added: ID:BUS[0-00:1023] GUID[00241b00054eb700]
[ 8.252218] acpi device:04: registered as cooling_device2
[ 8.252958] input: Video Bus as /devices/LNXSYSTM:00/device:00/PNP0A08:00/device:02/device:03/input/input8
[ 8.253267] ACPI: Video Device [VGA] (multi-head: yes rom: no post: no)
[ 8.365725] PM: Starting manual resume from disk
[ 8.366454] PM: Resume from partition 8:2
[ 8.366456] PM: Checking hibernation image.
[ 8.366625] PM: Resume from disk failed.
[ 8.396350] EXT4-fs (sda4): barriers enabled
[ 8.416311] kjournald2 starting: pid 1159, dev sda4:8, commit interval 5 seconds
[ 8.416613] EXT4-fs (sda4): delayed allocation enabled
[ 8.417023] EXT4-fs: file extents enabled
[ 8.420788] EXT4-fs: mballoc enabled
[ 8.421102] EXT4-fs (sda4): mounted filesystem with ordered data mode
[ 11.632192] usb-storage: device scan complete
[ 11.632694] scsi 5:0:0:0: Direct-Access StoreJet Transcend PQ: 0 ANSI: 2 CCS
[ 11.633784] sd 5:0:0:0: Attached scsi generic sg2 type 0
[ 11.634788] sd 5:0:0:0: [sdb] 625142448 512-byte logical blocks: (320 GB/298 GiB)
[ 11.637518] sd 5:0:0:0: [sdb] Write Protect is off
[ 11.637993] sd 5:0:0:0: [sdb] Mode Sense: 34 00 00 00
[ 11.637996] sd 5:0:0:0: [sdb] Assuming drive cache: write through
[ 11.641140] sd 5:0:0:0: [sdb] Assuming drive cache: write through
[ 11.641584] sdb: sdb1
[ 11.670015] sd 5:0:0:0: [sdb] Assuming drive cache: write through
[ 11.670402] sd 5:0:0:0: [sdb] Attached SCSI disk
[ 14.238114] udev: starting version 145
[ 15.092174] cfg80211: Calling CRDA to update world regulatory domain
[ 15.273507] ricoh-mmc: Ricoh MMC Controller disabling driver
[ 15.273770] ricoh-mmc: Copyright(c) Philip Langdale
[ 15.275456] sdhci: Secure Digital Host Controller Interface driver
[ 15.275779] sdhci: Copyright(c) Pierre Ossman
[ 15.276482] ricoh-mmc: Ricoh MMC controller found at 0000:0a:09.2 [1180:0843] (rev 12)
[ 15.276780] ricoh-mmc: Controller is now disabled.
[ 15.280636] sdhci-pci 0000:0a:09.1: SDHCI controller found [1180:0822] (rev 22)
[ 15.280945] sdhci-pci 0000:0a:09.1: PCI INT B -> GSI 17 (level, low) -> IRQ 17
[ 15.282898] sdhci-pci 0000:0a:09.1: Will use DMA mode even though HW doesn't fully claim to support it.
[ 15.284285] Registered led device: mmc0::
[ 15.285685] mmc0: SDHCI controller on PCI [0000:0a:09.1] using DMA
[ 15.337806] acer-wmi: Acer Laptop ACPI-WMI Extras
[ 15.338570] acer-wmi: Brightness must be controlled by generic video driver
[ 15.338838] Platform driver 'acer-wmi' needs updating - please use dev_pm_ops
[ 15.365862] Linux video capture interface: v2.00
[ 15.381799] acerhdf: Acer Aspire One Fan driver, v.0.5.13
[ 15.382088] acerhdf: no Aspire One hardware found
[ 15.424598] iwl3945: Intel(R) PRO/Wireless 3945ABG/BG Network Connection driver for Linux, 1.2.26ks
[ 15.424942] iwl3945: Copyright(c) 2003-2009 Intel Corporation
[ 15.425550] iwl3945 0000:06:00.0: enabling device (0000 -> 0002)
[ 15.425896] iwl3945 0000:06:00.0: PCI INT A -> GSI 19 (level, low) -> IRQ 19
[ 15.426427] iwl3945 0000:06:00.0: setting latency timer to 64
[ 15.429323] uvcvideo: Found UVC 1.00 device Acer CrystalEye webcam (064e:a101)
[ 15.500914] iwl3945 0000:06:00.0: Tunable channels: 13 802.11bg, 23 802.11a channels
[ 15.501203] iwl3945 0000:06:00.0: Detected Intel Wireless WiFi Link 3945ABG
[ 15.501584] alloc irq_desc for 29 on node 0
[ 15.501586] alloc kstat_irqs on node 0
[ 15.501629] iwl3945 0000:06:00.0: irq 29 for MSI/MSI-X
[ 15.502626] input: Acer CrystalEye webcam as /devices/pci0000:00/0000:00:1a.7/usb1/1-2/1-2:1.0/input/input9
[ 15.503014] usbcore: registered new interface driver uvcvideo
[ 15.503298] USB Video Class driver (v0.1.0)
[ 15.718021] phy0: Selected rate control algorithm 'iwl-3945-rs'
[ 15.809235] cfg80211: World regulatory domain updated:
[ 15.809505] (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
[ 15.809836] (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 15.810509] (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[ 15.811169] (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[ 15.811830] (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 15.812482] (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 15.887855] Synaptics Touchpad, model: 1, fw: 6.5, id: 0x1e0b1, caps: 0xc04751/0xe0500f
[ 15.925314] input: SynPS/2 Synaptics TouchPad as /devices/platform/i8042/serio3/input/input10
[ 15.940057] usb 7-1: new full speed USB device using uhci_hcd and address 2
[ 16.110221] usb 7-1: configuration #1 chosen from 1 choice
[ 16.155705] alloc irq_desc for 22 on node 0
[ 16.155709] alloc kstat_irqs on node 0
[ 16.155716] HDA Intel 0000:00:1b.0: PCI INT A -> GSI 22 (level, low) -> IRQ 22
[ 16.156040] HDA Intel 0000:00:1b.0: setting latency timer to 64
[ 16.162109] Bluetooth: Generic Bluetooth USB driver ver 0.5
[ 16.162529] usbcore: registered new interface driver btusb
[ 16.328442] input: HDA Digital PCBeep as /devices/pci0000:00/0000:00:1b.0/input/input11
[ 16.549763] Synaptics Touchpad, model: 1, fw: 6.5, id: 0x81a0b1, caps: 0xa04711/0xa04000
[ 16.584211] input: SynPS/2 Synaptics TouchPad as /devices/platform/i8042/serio4/input/input12
[ 16.667023] Adding 2000084k swap on /dev/sda2. Priority:-1 extents:1 across:2000084k
[ 16.959499] EXT4-fs (sda4): internal journal on sda4:8
[ 18.180074] type=1505 audit(1249677124.807:2): operation="profile_load" pid=1961 name=/usr/sbin/mysqld-akonadi
[ 18.182302] type=1505 audit(1249677124.811:3): operation="profile_load" pid=1962 name=/usr/sbin/tcpdump
[ 18.184931] type=1505 audit(1249677124.811:4): operation="profile_load" pid=1963 name=/usr/lib/cups/backend/cups-pdf
[ 18.185809] type=1505 audit(1249677124.815:5): operation="profile_load" pid=1963 name=/usr/sbin/cupsd
[ 18.188825] type=1505 audit(1249677124.815:6): operation="profile_load" pid=1964 name=/sbin/dhclient3
[ 18.189511] type=1505 audit(1249677124.819:7): operation="profile_load" pid=1964 name=/usr/lib/NetworkManager/nm-dhcp-client.action
[ 18.189873] type=1505 audit(1249677124.819:8): operation="profile_load" pid=1964 name=/usr/lib/connman/scripts/dhclient-script
[ 21.761129] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
[ 21.761132] Bluetooth: BNEP filters: protocol multicast
[ 21.808370] Bridge firewalling registered
[ 23.048688] lp: driver loaded but no devices found
[ 23.083484] ppdev: user-space parallel port driver
[ 23.846103] nouveau 0000:01:00.0: Allocating FIFO number 2
[ 23.861697] nouveau 0000:01:00.0: nouveau_fifo_alloc: initialised FIFO 2
[-- Attachment #3: Xorg.0.log --]
[-- Type: text/plain, Size: 25291 bytes --]
This is a pre-release version of the X server from The X.Org Foundation.
It is not supported in any way.
Bugs may be filed in the bugzilla at http://bugs.freedesktop.org/.
Select the "xorg" product for bugs you find in this release.
Before reporting bugs in pre-release versions please check the
latest version in the X.Org Foundation git repository.
See http://wiki.x.org/wiki/GitPage for git access instructions.
X.Org X Server 1.6.99.1
Release Date: (unreleased)
X Protocol Version 11, Revision 0
Build Operating System: Linux 2.6.24-24-xen x86_64 Ubuntu
Current Operating System: Linux liberty 2.6.31-5-generic #24-Ubuntu SMP Sat Aug 1 12:47:58 UTC 2009 x86_64
Kernel command line: BOOT_IMAGE=/vmlinuz-2.6.31-5-generic root=UUID=d92ee209-c032-4c4e-8e41-be8df8b8f231 ro nouveau.modeset=1 nouveau.uscript_lvds=1
Build Date: 05 August 2009 11:59:27AM
xorg-server 2:1.6.99.1+git20090805.95b678e6-0ubuntu0sarvatt2 (buildd@crested.buildd)
Current version of pixman: 0.15.19
Before reporting problems, check http://wiki.x.org
to make sure that you have the latest version.
Markers: (--) probed, (**) from config file, (==) default setting,
(++) from command line, (!!) notice, (II) informational,
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
(==) Log file: "/var/log/Xorg.0.log", Time: Sat Aug 8 00:32:09 2009
(==) Using config file: "/etc/X11/xorg.conf"
(==) No Layout section. Using the first Screen section.
(==) No screen section available. Using defaults.
(**) |-->Screen "Default Screen Section" (0)
(**) | |-->Monitor "<default monitor>"
(==) No device specified for screen "Default Screen Section".
Using the first device section listed.
(**) | |-->Device "Card0"
(==) No monitor specified for screen "Default Screen Section".
Using a default monitor configuration.
(==) Automatically adding devices
(==) Automatically enabling devices
(WW) The directory "/usr/share/fonts/X11/cyrillic" does not exist.
Entry deleted from font path.
(==) FontPath set to:
/usr/share/fonts/X11/misc,
/usr/share/fonts/X11/100dpi/:unscaled,
/usr/share/fonts/X11/75dpi/:unscaled,
/usr/share/fonts/X11/Type1,
/usr/share/fonts/X11/100dpi,
/usr/share/fonts/X11/75dpi,
/var/lib/defoma/x-ttcidfont-conf.d/dirs/TrueType,
built-ins
(==) ModulePath set to "/usr/lib/xorg/modules"
(II) Cannot locate a core pointer device.
(II) Cannot locate a core keyboard device.
(II) The server relies on HAL to provide the list of input devices.
If no devices become available, reconfigure HAL or disable AllowEmptyInput.
(II) Loader magic: 0x7c53a0
(II) Module ABI versions:
X.Org ANSI C Emulation: 0.4
X.Org Video Driver: 6.0
X.Org XInput driver : 7.0
X.Org Server Extension : 2.0
(++) using VT number 7
(--) PCI:*(0:1:0:0) 10de:0425:1025:0121 nVidia Corporation G86 [GeForce 8600M GS] rev 161, Mem @ 0xf2000000/16777216, 0xd0000000/268435456, 0xf0000000/33554432, I/O @ 0x00002000/128
(II) Open ACPI successful (/var/run/acpid.socket)
(II) LoadModule: "extmod"
(II) Loading /usr/lib/xorg/modules/extensions/libextmod.so
(II) Module extmod: vendor="X.Org Foundation"
compiled for 1.6.99.1, module version = 1.0.0
Module class: X.Org Server Extension
ABI class: X.Org Server Extension, version 2.0
(II) Loading extension MIT-SCREEN-SAVER
(II) Loading extension XFree86-VidModeExtension
(II) Loading extension XFree86-DGA
(II) Loading extension DPMS
(II) Loading extension XVideo
(II) Loading extension XVideo-MotionCompensation
(II) Loading extension X-Resource
(II) LoadModule: "dbe"
(II) Loading /usr/lib/xorg/modules/extensions/libdbe.so
(II) Module dbe: vendor="X.Org Foundation"
compiled for 1.6.99.1, module version = 1.0.0
Module class: X.Org Server Extension
ABI class: X.Org Server Extension, version 2.0
(II) Loading extension DOUBLE-BUFFER
(II) LoadModule: "glx"
(II) Loading /usr/lib/xorg/modules/extensions/libglx.so
(II) Module glx: vendor="X.Org Foundation"
compiled for 1.6.99.1, module version = 1.0.0
ABI class: X.Org Server Extension, version 2.0
(==) AIGLX enabled
(II) Loading extension GLX
(II) LoadModule: "record"
(II) Loading /usr/lib/xorg/modules/extensions/librecord.so
(II) Module record: vendor="X.Org Foundation"
compiled for 1.6.99.1, module version = 1.13.0
Module class: X.Org Server Extension
ABI class: X.Org Server Extension, version 2.0
(II) Loading extension RECORD
(II) LoadModule: "dri"
(II) Loading /usr/lib/xorg/modules/extensions/libdri.so
(II) Module dri: vendor="X.Org Foundation"
compiled for 1.6.99.1, module version = 1.0.0
ABI class: X.Org Server Extension, version 2.0
(II) Loading extension XFree86-DRI
(II) LoadModule: "dri2"
(II) Loading /usr/lib/xorg/modules/extensions/libdri2.so
(II) Module dri2: vendor="X.Org Foundation"
compiled for 1.6.99.1, module version = 1.1.0
ABI class: X.Org Server Extension, version 2.0
(II) Loading extension DRI2
(II) LoadModule: "nouveau"
(II) Loading /usr/lib/xorg/modules/drivers/nouveau_drv.so
(II) Module nouveau: vendor="X.Org Foundation"
compiled for 1.6.99.1, module version = 0.0.10
Module class: X.Org Video Driver
ABI class: X.Org Video Driver, version 6.0
(II) NOUVEAU driver Date: Thu Jul 30 19:24:19 2009 +1000
(II) NOUVEAU driver for NVIDIA chipset families :
RIVA TNT (NV04)
RIVA TNT2 (NV05)
GeForce 256 (NV10)
GeForce 2 (NV11, NV15)
GeForce 4MX (NV17, NV18)
GeForce 3 (NV20)
GeForce 4Ti (NV25, NV28)
GeForce FX (NV3x)
GeForce 6 (NV4x)
GeForce 7 (G7x)
GeForce 8 (G8x)
(II) Primary Device is: PCI 01@00:00:0
(--) NOUVEAU(0): Chipset: "NVIDIA NV86"
(II) Loading sub module "int10"
(II) LoadModule: "int10"
(II) Loading /usr/lib/xorg/modules/libint10.so
(II) Module int10: vendor="X.Org Foundation"
compiled for 1.6.99.1, module version = 1.0.0
ABI class: X.Org Video Driver, version 6.0
(II) NOUVEAU(0): Initializing int10
(II) NOUVEAU(0): Primary V_BIOS segment is: 0xc000
(II) Loading sub module "dri"
(II) LoadModule: "dri"
(II) Reloading /usr/lib/xorg/modules/extensions/libdri.so
(II) NOUVEAU(0): Loaded DRI module
drmOpenDevice: node name is /dev/dri/card0
drmOpenDevice: open result is 10, (OK)
drmOpenDevice: node name is /dev/dri/card0
drmOpenDevice: open result is 10, (OK)
drmOpenByBusid: Searching for BusID pci:0000:01:00.0
drmOpenDevice: node name is /dev/dri/card0
drmOpenDevice: open result is 10, (OK)
drmOpenByBusid: drmOpenMinor returns 10
drmOpenByBusid: drmGetBusid reports pci:0000:01:00.0
(II) [drm] DRM interface version 1.3
(II) [drm] DRM open master succeeded.
(II) NOUVEAU(0): [drm] nouveau interface version: 0.0.15
(--) NOUVEAU(0): [drm] kernel modesetting in use
(II) NOUVEAU(0): Creating default Display subsection in Screen section
"Default Screen Section" for depth/fbbpp 24/32
(==) NOUVEAU(0): Depth 24, (--) framebuffer bpp 32
(==) NOUVEAU(0): RGB weight 888
(==) NOUVEAU(0): Default visual is TrueColor
(II) Loading sub module "vgahw"
(II) LoadModule: "vgahw"
(II) Loading /usr/lib/xorg/modules/libvgahw.so
(II) Module vgahw: vendor="X.Org Foundation"
compiled for 1.6.99.1, module version = 0.1.0
ABI class: X.Org Video Driver, version 6.0
(**) NOUVEAU(0): Option "EXAPixmaps" "true"
(==) NOUVEAU(0): Using HW cursor
(--) NOUVEAU(0): Linear framebuffer at 0xD0000000
(--) NOUVEAU(0): MMIO registers at 0xF2000000
(II) NOUVEAU(0): Output LVDS-0 has no monitor section
(II) NOUVEAU(0): Output VGA-0 has no monitor section
(II) NOUVEAU(0): Output DVI-D-0 has no monitor section
(II) NOUVEAU(0): EDID for output LVDS-0
(II) NOUVEAU(0): Manufacturer: AUO Model: 8174 Serial#: 0
(II) NOUVEAU(0): Year: 2006 Week: 1
(II) NOUVEAU(0): EDID Version: 1.3
(II) NOUVEAU(0): Digital Display Input
(II) NOUVEAU(0): Max Image Size [cm]: horiz.: 33 vert.: 21
(II) NOUVEAU(0): Gamma: 2.20
(II) NOUVEAU(0): No DPMS capabilities specified
(II) NOUVEAU(0): Supported color encodings: RGB 4:4:4 YCrCb 4:4:4
(II) NOUVEAU(0): First detailed timing is preferred mode
(II) NOUVEAU(0): redX: 0.590 redY: 0.345 greenX: 0.315 greenY: 0.555
(II) NOUVEAU(0): blueX: 0.155 blueY: 0.155 whiteX: 0.313 whiteY: 0.329
(II) NOUVEAU(0): Manufacturer's mask: 0
(II) NOUVEAU(0): Supported detailed timing:
(II) NOUVEAU(0): clock: 71.1 MHz Image Size: 331 x 207 mm
(II) NOUVEAU(0): h_active: 1280 h_sync: 1328 h_sync_end 1360 h_blank_end 1440 h_border: 0
(II) NOUVEAU(0): v_active: 800 v_sync: 803 v_sync_end 809 v_blanking: 823 v_border: 0
(WW) NOUVEAU(0): Unknown vendor-specific block f
(II) NOUVEAU(0): AUO
(II) NOUVEAU(0): B154EW08 V1
(II) NOUVEAU(0): EDID (in hex):
(II) NOUVEAU(0): 00ffffffffffff0006af748100000000
(II) NOUVEAU(0): 01100103802115780a1cf59758508e27
(II) NOUVEAU(0): 27505400000001010101010101010101
(II) NOUVEAU(0): 010101010101c71b00a0502017303020
(II) NOUVEAU(0): 36004bcf100000180000000f00000000
(II) NOUVEAU(0): 00000000000000000020000000fe0041
(II) NOUVEAU(0): 554f0a202020202020202020000000fe
(II) NOUVEAU(0): 004231353445573038205631200a0043
(II) NOUVEAU(0): EDID vendor "AUO", prod id 33140
(II) NOUVEAU(0): Printing DDC gathered Modelines:
(II) NOUVEAU(0): Modeline "1280x800"x0.0 71.11 1280 1328 1360 1440 800 803 809 823 -hsync -vsync (49.4 kHz)
(II) NOUVEAU(0): Printing probed modes for output LVDS-0
(II) NOUVEAU(0): Modeline "1280x800"x60.0 71.11 1280 1328 1360 1440 800 803 809 823 -hsync -vsync (49.4 kHz)
(II) NOUVEAU(0): EDID for output VGA-0
(II) NOUVEAU(0): EDID for output DVI-D-0
(II) NOUVEAU(0): Output LVDS-0 connected
(II) NOUVEAU(0): Output VGA-0 disconnected
(II) NOUVEAU(0): Output DVI-D-0 disconnected
(II) NOUVEAU(0): Using exact sizes for initial modes
(II) NOUVEAU(0): Output LVDS-0 using initial mode 1280x800
(II) NOUVEAU(0): Using default gamma of (1.0, 1.0, 1.0) unless otherwise stated.
(II) NOUVEAU(0): Initial CRTC_OWNER is 0
(--) NOUVEAU(0): VideoRAM: 262144 kBytes
(--) NOUVEAU(0): Virtual size is 1280x800 (pitch 1280)
(**) NOUVEAU(0): Driver mode "1280x800": 71.1 MHz (scaled from 0.0 MHz), 49.4 kHz, 60.0 Hz
(II) NOUVEAU(0): Modeline "1280x800"x60.0 71.11 1280 1328 1360 1440 800 803 809 823 -hsync -vsync (49.4 kHz)
(**) NOUVEAU(0): Display dimensions: (330, 210) mm
(**) NOUVEAU(0): DPI set to (98, 96)
(II) Loading sub module "wfb"
(II) LoadModule: "wfb"
(II) Loading /usr/lib/xorg/modules/libwfb.so
(II) Module wfb: vendor="X.Org Foundation"
compiled for 1.6.99.1, module version = 1.0.0
ABI class: X.Org ANSI C Emulation, version 0.4
(II) Loading sub module "fb"
(II) LoadModule: "fb"
(II) Loading /usr/lib/xorg/modules/libfb.so
(II) Module fb: vendor="X.Org Foundation"
compiled for 1.6.99.1, module version = 1.0.0
ABI class: X.Org ANSI C Emulation, version 0.4
(II) Loading sub module "exa"
(II) LoadModule: "exa"
(II) Loading /usr/lib/xorg/modules/libexa.so
(II) Module exa: vendor="X.Org Foundation"
compiled for 1.6.99.1, module version = 2.5.0
ABI class: X.Org Video Driver, version 6.0
(II) Loading sub module "shadowfb"
(II) LoadModule: "shadowfb"
(II) Loading /usr/lib/xorg/modules/libshadowfb.so
(II) Module shadowfb: vendor="X.Org Foundation"
compiled for 1.6.99.1, module version = 1.0.0
ABI class: X.Org ANSI C Emulation, version 0.4
(--) Depth 24 pixmap format is 32 bpp
(II) NOUVEAU(0): AGPGART: 512MiB available
(II) NOUVEAU(0): GART: Allocated 16MiB as a scratch buffer
(II) NOUVEAU(0): [DRI2] Setup complete
(II) NOUVEAU(0): Opened GPU channel 2
(II) EXA(0): Driver allocated offscreen pixmaps
(II) EXA(0): Driver registered support for the following operations:
(II) Solid
(II) Copy
(II) Composite (RENDER acceleration)
(II) UploadToScreen
(II) DownloadFromScreen
(==) NOUVEAU(0): Backing store disabled
(==) NOUVEAU(0): Silken mouse enabled
(II) NOUVEAU(0): [XvMC] Associated with Nouveau GeForce 8/9 Textured Video.
(II) NOUVEAU(0): [XvMC] Extension initialized.
(II) NOUVEAU(0): NVEnterVT is called.
(==) NOUVEAU(0): DPMS enabled
(II) NOUVEAU(0): RandR 1.2 enabled, ignore the following RandR disabled message.
(--) RandR disabled
(II) Initializing built-in extension Generic Event Extension
(II) Initializing built-in extension SHAPE
(II) Initializing built-in extension MIT-SHM
(II) Initializing built-in extension XInputExtension
(II) Initializing built-in extension XTEST
(II) Initializing built-in extension BIG-REQUESTS
(II) Initializing built-in extension SYNC
(II) Initializing built-in extension XKEYBOARD
(II) Initializing built-in extension XC-MISC
(II) Initializing built-in extension SECURITY
(II) Initializing built-in extension XINERAMA
(II) Initializing built-in extension XFIXES
(II) Initializing built-in extension RENDER
(II) Initializing built-in extension RANDR
(II) Initializing built-in extension COMPOSITE
(II) Initializing built-in extension DAMAGE
record: RECORD extension enabled at configure time.
record: This extension is known to be broken, disabling extension now..
record: http://bugs.freedesktop.org/show_bug.cgi?id=20500
(EE) AIGLX error: dlopen of /usr/lib/dri/nouveau_dri.so failed (/usr/lib/dri/nouveau_dri.so: cannot open shared object file: No such file or directory)
(EE) AIGLX: reverting to software rendering
(II) AIGLX: Screen 0 is not DRI capable
(II) AIGLX: Loaded and initialized /usr/lib/dri/swrast_dri.so
(II) GLX: Initialized DRISWRAST GL provider for screen 0
(II) NOUVEAU(0): Setting screen physical size to 338 x 211
resize called 1280 800
(II) config/hal: Adding input device Acer CrystalEye webcam
(II) LoadModule: "evdev"
(II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
(II) Module evdev: vendor="X.Org Foundation"
compiled for 1.6.99.1, module version = 2.2.99
Module class: X.Org XInput Driver
ABI class: X.Org XInput driver, version 7.0
(**) Acer CrystalEye webcam: always reports core events
(**) Acer CrystalEye webcam: Device: "/dev/input/event9"
(II) Acer CrystalEye webcam: Found keys
(II) Acer CrystalEye webcam: Configuring as keyboard
(II) XINPUT: Adding extended input device "Acer CrystalEye webcam" (type: KEYBOARD)
(**) Option "xkb_rules" "evdev"
(**) Option "xkb_model" "pc105"
(**) Option "xkb_layout" "us,ru"
(**) Option "xkb_variant" ","
(**) Option "xkb_options" "grp:ctrl_shift_toggle,grp_led:scroll"
(II) config/hal: Adding input device AT Translated Set 2 keyboard
(**) AT Translated Set 2 keyboard: always reports core events
(**) AT Translated Set 2 keyboard: Device: "/dev/input/event5"
(II) AT Translated Set 2 keyboard: Found keys
(II) AT Translated Set 2 keyboard: Configuring as keyboard
(II) XINPUT: Adding extended input device "AT Translated Set 2 keyboard" (type: KEYBOARD)
(**) Option "xkb_rules" "evdev"
(**) Option "xkb_model" "pc105"
(**) Option "xkb_layout" "us,ru"
(**) Option "xkb_variant" ","
(**) Option "xkb_options" "grp:ctrl_shift_toggle,grp_led:scroll"
(II) config/hal: Adding input device Logitech USB Receiver
(**) Logitech USB Receiver: always reports core events
(**) Logitech USB Receiver: Device: "/dev/input/event7"
(II) Logitech USB Receiver: Found 1 mouse buttons
(II) Logitech USB Receiver: found relative axes
(II) Logitech USB Receiver: Found scroll wheel(s)
(II) Logitech USB Receiver: found absolute axes
(II) Logitech USB Receiver: Found keys
(II) Logitech USB Receiver: Configuring as mouse
(II) Logitech USB Receiver: Configuring as keyboard
(**) Logitech USB Receiver: YAxisMapping: buttons 4 and 5
(**) Logitech USB Receiver: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
(II) XINPUT: Adding extended input device "Logitech USB Receiver" (type: KEYBOARD)
(**) Option "xkb_rules" "evdev"
(**) Option "xkb_model" "pc105"
(**) Option "xkb_layout" "us,ru"
(**) Option "xkb_variant" ","
(**) Option "xkb_options" "grp:ctrl_shift_toggle,grp_led:scroll"
(EE) Logitech USB Receiver: failed to initialize for relative axes.
(**) Logitech USB Receiver: (accel) keeping acceleration scheme 1
(**) Logitech USB Receiver: (accel) acceleration profile 0
(II) Logitech USB Receiver: initialized for absolute axes.
(II) config/hal: Adding input device Sleep Button
(**) Sleep Button: always reports core events
(**) Sleep Button: Device: "/dev/input/event3"
(II) Sleep Button: Found keys
(II) Sleep Button: Configuring as keyboard
(II) XINPUT: Adding extended input device "Sleep Button" (type: KEYBOARD)
(**) Option "xkb_rules" "evdev"
(**) Option "xkb_model" "pc105"
(**) Option "xkb_layout" "us,ru"
(**) Option "xkb_variant" ","
(**) Option "xkb_options" "grp:ctrl_shift_toggle,grp_led:scroll"
(II) config/hal: Adding input device Power Button
(**) Power Button: always reports core events
(**) Power Button: Device: "/dev/input/event2"
(II) Power Button: Found keys
(II) Power Button: Configuring as keyboard
(II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD)
(**) Option "xkb_rules" "evdev"
(**) Option "xkb_model" "pc105"
(**) Option "xkb_layout" "us,ru"
(**) Option "xkb_variant" ","
(**) Option "xkb_options" "grp:ctrl_shift_toggle,grp_led:scroll"
(II) config/hal: Adding input device Video Bus
(**) Video Bus: always reports core events
(**) Video Bus: Device: "/dev/input/event8"
(II) Video Bus: Found keys
(II) Video Bus: Configuring as keyboard
(II) XINPUT: Adding extended input device "Video Bus" (type: KEYBOARD)
(**) Option "xkb_rules" "evdev"
(**) Option "xkb_model" "pc105"
(**) Option "xkb_layout" "us,ru"
(**) Option "xkb_variant" ","
(**) Option "xkb_options" "grp:ctrl_shift_toggle,grp_led:scroll"
(II) config/hal: Adding input device Power Button
(**) Power Button: always reports core events
(**) Power Button: Device: "/dev/input/event0"
(II) Power Button: Found keys
(II) Power Button: Configuring as keyboard
(II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD)
(**) Option "xkb_rules" "evdev"
(**) Option "xkb_model" "pc105"
(**) Option "xkb_layout" "us,ru"
(**) Option "xkb_variant" ","
(**) Option "xkb_options" "grp:ctrl_shift_toggle,grp_led:scroll"
(II) config/hal: Adding input device Macintosh mouse button emulation
(**) Macintosh mouse button emulation: always reports core events
(**) Macintosh mouse button emulation: Device: "/dev/input/event4"
(II) Macintosh mouse button emulation: Found 3 mouse buttons
(II) Macintosh mouse button emulation: found relative axes
(II) Macintosh mouse button emulation: Found x and y relative axes
(II) Macintosh mouse button emulation: Configuring as mouse
(**) Macintosh mouse button emulation: YAxisMapping: buttons 4 and 5
(**) Macintosh mouse button emulation: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
(II) XINPUT: Adding extended input device "Macintosh mouse button emulation" (type: MOUSE)
(**) Macintosh mouse button emulation: (accel) keeping acceleration scheme 1
(**) Macintosh mouse button emulation: (accel) acceleration profile 0
(II) Macintosh mouse button emulation: initialized for relative axes.
(II) config/hal: Adding input device SynPS/2 Synaptics TouchPad
(II) LoadModule: "synaptics"
(II) Loading /usr/lib/xorg/modules/input/synaptics_drv.so
(II) Module synaptics: vendor="X.Org Foundation"
compiled for 1.6.99.1, module version = 1.1.99
Module class: X.Org XInput Driver
ABI class: X.Org XInput driver, version 7.0
(II) Synaptics touchpad driver version 1.1.99
(**) Option "Device" "/dev/input/event12"
(II) SynPS/2 Synaptics TouchPad: x-axis range 1472 - 5472
(II) SynPS/2 Synaptics TouchPad: y-axis range 1408 - 4448
(II) SynPS/2 Synaptics TouchPad: pressure range 0 - 255
(II) SynPS/2 Synaptics TouchPad: finger width range 0 - 0
(II) SynPS/2 Synaptics TouchPad: buttons: left right middle
(--) SynPS/2 Synaptics TouchPad: touchpad found
(**) SynPS/2 Synaptics TouchPad: always reports core events
(II) XINPUT: Adding extended input device "SynPS/2 Synaptics TouchPad" (type: TOUCHPAD)
(**) SynPS/2 Synaptics TouchPad: (accel) keeping acceleration scheme 1
(**) SynPS/2 Synaptics TouchPad: (accel) acceleration profile 0
(--) SynPS/2 Synaptics TouchPad: touchpad found
(II) config/hal: Adding input device SynPS/2 Synaptics TouchPad
(II) Synaptics touchpad driver version 1.1.99
(**) Option "Device" "/dev/input/event10"
(II) SynPS/2 Synaptics TouchPad: x-axis range 1472 - 5472
(II) SynPS/2 Synaptics TouchPad: y-axis range 1408 - 4448
(II) SynPS/2 Synaptics TouchPad: pressure range 0 - 255
(II) SynPS/2 Synaptics TouchPad: finger width range 0 - 0
(II) SynPS/2 Synaptics TouchPad: buttons: left right middle
(--) SynPS/2 Synaptics TouchPad: touchpad found
(**) SynPS/2 Synaptics TouchPad: always reports core events
(II) XINPUT: Adding extended input device "SynPS/2 Synaptics TouchPad" (type: TOUCHPAD)
(**) SynPS/2 Synaptics TouchPad: (accel) keeping acceleration scheme 1
(**) SynPS/2 Synaptics TouchPad: (accel) acceleration profile 0
(--) SynPS/2 Synaptics TouchPad: touchpad found
(II) config/hal: Adding input device Logitech USB Receiver
(**) Logitech USB Receiver: always reports core events
(**) Logitech USB Receiver: Device: "/dev/input/event6"
(II) Logitech USB Receiver: Found 20 mouse buttons
(II) Logitech USB Receiver: found relative axes
(II) Logitech USB Receiver: Found x and y relative axes
(II) Logitech USB Receiver: Found scroll wheel(s)
(II) Logitech USB Receiver: Configuring as mouse
(**) Logitech USB Receiver: YAxisMapping: buttons 4 and 5
(**) Logitech USB Receiver: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
(II) XINPUT: Adding extended input device "Logitech USB Receiver" (type: MOUSE)
(**) Logitech USB Receiver: (accel) keeping acceleration scheme 1
(**) Logitech USB Receiver: (accel) acceleration profile 0
(II) Logitech USB Receiver: initialized for relative axes.
(II) NOUVEAU(0): EDID for output LVDS-0
(II) NOUVEAU(0): Manufacturer: AUO Model: 8174 Serial#: 0
(II) NOUVEAU(0): Year: 2006 Week: 1
(II) NOUVEAU(0): EDID Version: 1.3
(II) NOUVEAU(0): Digital Display Input
(II) NOUVEAU(0): Max Image Size [cm]: horiz.: 33 vert.: 21
(II) NOUVEAU(0): Gamma: 2.20
(II) NOUVEAU(0): No DPMS capabilities specified
(II) NOUVEAU(0): Supported color encodings: RGB 4:4:4 YCrCb 4:4:4
(II) NOUVEAU(0): First detailed timing is preferred mode
(II) NOUVEAU(0): redX: 0.590 redY: 0.345 greenX: 0.315 greenY: 0.555
(II) NOUVEAU(0): blueX: 0.155 blueY: 0.155 whiteX: 0.313 whiteY: 0.329
(II) NOUVEAU(0): Manufacturer's mask: 0
(II) NOUVEAU(0): Supported detailed timing:
(II) NOUVEAU(0): clock: 71.1 MHz Image Size: 331 x 207 mm
(II) NOUVEAU(0): h_active: 1280 h_sync: 1328 h_sync_end 1360 h_blank_end 1440 h_border: 0
(II) NOUVEAU(0): v_active: 800 v_sync: 803 v_sync_end 809 v_blanking: 823 v_border: 0
(WW) NOUVEAU(0): Unknown vendor-specific block f
(II) NOUVEAU(0): AUO
(II) NOUVEAU(0): B154EW08 V1
(II) NOUVEAU(0): EDID (in hex):
(II) NOUVEAU(0): 00ffffffffffff0006af748100000000
(II) NOUVEAU(0): 01100103802115780a1cf59758508e27
(II) NOUVEAU(0): 27505400000001010101010101010101
(II) NOUVEAU(0): 010101010101c71b00a0502017303020
(II) NOUVEAU(0): 36004bcf100000180000000f00000000
(II) NOUVEAU(0): 00000000000000000020000000fe0041
(II) NOUVEAU(0): 554f0a202020202020202020000000fe
(II) NOUVEAU(0): 004231353445573038205631200a0043
(II) NOUVEAU(0): EDID vendor "AUO", prod id 33140
(II) NOUVEAU(0): Printing DDC gathered Modelines:
(II) NOUVEAU(0): Modeline "1280x800"x0.0 71.11 1280 1328 1360 1440 800 803 809 823 -hsync -vsync (49.4 kHz)
(II) NOUVEAU(0): Printing probed modes for output LVDS-0
(II) NOUVEAU(0): Modeline "1280x800"x60.0 71.11 1280 1328 1360 1440 800 803 809 823 -hsync -vsync (49.4 kHz)
(II) NOUVEAU(0): EDID for output VGA-0
(II) NOUVEAU(0): EDID for output DVI-D-0
(II) NOUVEAU(0): EDID for output LVDS-0
(II) NOUVEAU(0): Manufacturer: AUO Model: 8174 Serial#: 0
(II) NOUVEAU(0): Year: 2006 Week: 1
(II) NOUVEAU(0): EDID Version: 1.3
(II) NOUVEAU(0): Digital Display Input
(II) NOUVEAU(0): Max Image Size [cm]: horiz.: 33 vert.: 21
(II) NOUVEAU(0): Gamma: 2.20
(II) NOUVEAU(0): No DPMS capabilities specified
(II) NOUVEAU(0): Supported color encodings: RGB 4:4:4 YCrCb 4:4:4
(II) NOUVEAU(0): First detailed timing is preferred mode
(II) NOUVEAU(0): redX: 0.590 redY: 0.345 greenX: 0.315 greenY: 0.555
(II) NOUVEAU(0): blueX: 0.155 blueY: 0.155 whiteX: 0.313 whiteY: 0.329
(II) NOUVEAU(0): Manufacturer's mask: 0
(II) NOUVEAU(0): Supported detailed timing:
(II) NOUVEAU(0): clock: 71.1 MHz Image Size: 331 x 207 mm
(II) NOUVEAU(0): h_active: 1280 h_sync: 1328 h_sync_end 1360 h_blank_end 1440 h_border: 0
(II) NOUVEAU(0): v_active: 800 v_sync: 803 v_sync_end 809 v_blanking: 823 v_border: 0
(WW) NOUVEAU(0): Unknown vendor-specific block f
(II) NOUVEAU(0): AUO
(II) NOUVEAU(0): B154EW08 V1
(II) NOUVEAU(0): EDID (in hex):
(II) NOUVEAU(0): 00ffffffffffff0006af748100000000
(II) NOUVEAU(0): 01100103802115780a1cf59758508e27
(II) NOUVEAU(0): 27505400000001010101010101010101
(II) NOUVEAU(0): 010101010101c71b00a0502017303020
(II) NOUVEAU(0): 36004bcf100000180000000f00000000
(II) NOUVEAU(0): 00000000000000000020000000fe0041
(II) NOUVEAU(0): 554f0a202020202020202020000000fe
(II) NOUVEAU(0): 004231353445573038205631200a0043
(II) NOUVEAU(0): EDID vendor "AUO", prod id 33140
(II) NOUVEAU(0): Printing DDC gathered Modelines:
(II) NOUVEAU(0): Modeline "1280x800"x0.0 71.11 1280 1328 1360 1440 800 803 809 823 -hsync -vsync (49.4 kHz)
(II) NOUVEAU(0): Printing probed modes for output LVDS-0
(II) NOUVEAU(0): Modeline "1280x800"x60.0 71.11 1280 1328 1360 1440 800 803 809 823 -hsync -vsync (49.4 kHz)
(II) NOUVEAU(0): EDID for output VGA-0
(II) NOUVEAU(0): EDID for output DVI-D-0
[-- Attachment #4: Type: text/plain, Size: 181 bytes --]
_______________________________________________
Nouveau mailing list
Nouveau-PD4FTy7X32lNgt0PjOBp9y5qC8QIuHrW@public.gmane.org
http://lists.freedesktop.org/mailman/listinfo/nouveau
^ permalink raw reply [flat|nested] only message in thread
only message in thread, other threads:[~2009-08-07 21:26 UTC | newest]
Thread overview: (only message) (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
2009-08-07 21:26 [nouveau] nv50 report provider.spb-JGs/UdohzUI
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.