* Re: RFC: methods of sched event tracing and my assumptions
[not found] <4A9C1371.6050101@us.ibm.com>
@ 2009-08-31 23:00 ` Darren Hart
2009-09-02 21:09 ` Darren Hart
0 siblings, 1 reply; 2+ messages in thread
From: Darren Hart @ 2009-08-31 23:00 UTC (permalink / raw)
To: linux-rt-users
Cc: Peter Zijlstra, Steven Rostedt, Thomas Gleixner,
Dinakar Guniguntala, lkml,
[-- Attachment #1: Type: text/plain, Size: 5298 bytes --]
Darren Hart wrote:
> I'm trying to determine how Requeue PI affects pthread_cond_broadcast()
> when using a PI mutex. This boils down to doing a FUTEX_REQUEUE
> (requeue pi) instead of a FUTEX_WAKE(all) (without requeue pi). With
> FUTEX_WAKE(all), every thread is woken on the broadcast and then goes
> back to sleep to cycle through acquisition of the contended mutex. With
> FUTEX_REQUEUE, only one task (at most, iff the mutex is uncontended
> across the broadcast, which it normally is not) is woken at the time of
> the broadcast, and the rest are simply requeued to be woken when it is
> there turn to acquire the mutex.
>
> At a minimum I would expect to see NR_THREADS (where NR_THREADS is the
> number of threads queued on the condvar/futex at the time of the
> broadcast) fewer "wakeups" when FUTEX_REQUEUE is used.
>
> I have included two plots, one running on 2.6.31-rc8 (linus) and one
> running on tip/rt/head as of Aug 24. The min86 refers to the threads of
> prio-wake having a priority range of 86-93 rather than 1-8. I made this
> change thinking the low priority threads might be seeing additional
> scheduling activity due to the higher priority kernel threads in the rt
> kernel and the extra preemption points. This change didn't have a
> significant impact.
>
> I was surprised to see the average for rqpi-locked (the case I care the
> most about) to jump from an average of 17 wakeups on linus to 40 on rt.
> I would greatly appreciate a review of my methods of data collection to
> ensure my definition of "wakeup" is sane.
>
> I'm collecting 100 traces of prio-wake runs (from LTP
> testcases/realtime/func/prio-wake) as follows:
After some gentle resistance to CVS and non-single-file testcases, I
prepared a standalone prio-wake-min.c. It ran to completion on linus
with slightly fewer wakeups than the LTP version (I removed a number of
things that weren't strictly necessary for this specific exercise), png
attached. It's hung part way through the scripts on rt though. I'll be
looking into that, but in case you prefer to look at this version, it is
available here:
http://dvhart.com/darren/linux/prio-wake-min.c
--
Darren
>
> $ cat trace-prio-wake #!/bin/sh
> LOG=$1
> shift
> echo 1 > /debug/tracing/tracing_enabled
> echo 0 > /debug/tracing/tracing_on
> echo nop > /debug/tracing/current_tracer
> echo 1 > /debug/tracing/events/sched/enable
> echo 1 > /debug/tracing/options/latency-format
> echo '' > /debug/tracing/trace
> echo 1 > /debug/tracing/tracing_on
> #/usr/bin/trace-cmd -s ./prio-wake $@
> ./prio-wake $@ 2>/dev/null
> echo 0 > /debug/tracing/tracing_on
> cat /debug/tracing/trace > $LOG.lat
> echo 0 > /debug/tracing/options/latency-format
> cat /debug/tracing/trace > $LOG.log
>
> I run this script from another script which it 100 times each for all 4
> combinations of with and without Requeue PI and with and without the
> mutex locked across the pthread_cond_broadcast call:
>
> $ cat gen_traces.sh
> #!/bin/sh
>
> # Generate 100 traces for each of 4 configurations
> RQPI_LIB_PATH=/test/dvhart/lib/x86_64
> ITERS=100
>
> for ((i=0;i<ITERS;i++)); do
> ./trace-prio-wake norqpi-locked-$i
> ./trace-prio-wake norqpi-unlocked-$i -l0
> LD_LIBRARY_PATH=$RQPI_LIB_PATH ./trace-prio-wake rqpi-locked-$i
> LD_LIBRARY_PATH=$RQPI_LIB_PATH ./trace-prio-wake rqpi-unlocked-$i -l0
> done
>
> egrep -c "prio-wake.*wakeup:.*prio-wake" rqpi-unlocked*.log | sed -e
> "s/.*://" > rqpi-unlocked.dat
> egrep -c "prio-wake.*wakeup:.*prio-wake" rqpi-locked*.log | sed -e
> "s/.*://" > rqpi-locked.dat
> egrep -c "prio-wake.*wakeup:.*prio-wake" norqpi-locked*.log | sed -e
> "s/.*://" > norqpi-locked.dat
> egrep -c "prio-wake.*wakeup:.*prio-wake" norqpi-unlocked*.log | sed -e
> "s/.*://" > norqpi-unlocked.dat
>
>
> The 4 egrep commands generate the dat files I used in the attached
> plots. They attempt to eliminate external scheduler events (those
> caused by kernel threads preempting the test case for example, as that
> is assumed to be irrelevant to the impact of requeue PI on this test. I
> am only considering wakeups of the test threads that are caused by other
> threads of the test. This should include all FUTEX operations,
> including the cond_wait, cond_broadcast, and all PI mutex_lock and
> unlock() calls. As such, I don't know what would cause the average to
> jump from 17 to 40 on rt, as I wouldn't expect the test itself to be
> doing any additional wakeups even if the kernel threads are preempting
> the the test threads more frequently on RT.
>
> I have also uploaded a single log for one run on rt with the mutex
> locked (50th iteration with 46 wakeups reported by the egrep filter),
> you can apply the egrep above to determine how the filter affects it.
> For context, I had instrumented the futex operations with some
> trace_printk's. Those will illustrate the key points in the test case:
> FUTEX_WAIT_REQUEUE_PI and FUTEX_REQUEUE. That can be found here:
>
> http://dvhart.com/darren/linux/rqpi-locked-50.log
>
> o Do my data collection methods look sane?
> o Does my definition of "wakeup" make sense?
> o Does the jump from 17 to 40 wakeups going from linus to rt surprise
> anyone else?
>
> Thanks,
>
--
Darren Hart
IBM Linux Technology Center
Real-Time Linux Team
[-- Attachment #2: rqpi-avg-linus-standalone.png --]
[-- Type: image/png, Size: 43147 bytes --]
^ permalink raw reply [flat|nested] 2+ messages in thread![[-- Attachment #2: rqpi-avg-linus-standalone.png --] [-- Type: image/png, Size: 43147 bytes --]](../../4A9C5600.8060007@us.ibm.com/2-rqpi-avg-linus-standalone.png){kind=link}