* [U-Boot] [PATCH v2 1/5] 85xx: add boot from NAND/eSDHC/eSPI support
2009-09-11 2:53 [U-Boot] [PATCH v2 0/5] Add " Mingkai Hu
@ 2009-09-11 2:53 ` Mingkai Hu
2009-09-11 3:12 ` Kumar Gala
0 siblings, 1 reply; 8+ messages in thread
From: Mingkai Hu @ 2009-09-11 2:53 UTC (permalink / raw)
To: u-boot
The MPC8536E is capable of booting form NAND/eSDHC/eSPI, this patch
implements these three bootup methods in a unified way - all of these
use the general cpu/mpc85xx/start.S, and load the main image to L2SRAM
which lets us use the SPD to initialize the SDRAM.
For all three bootup methods, the bootup process can be divided into two
stages: the first stage will initialize the corresponding controller,
configure the L2SRAM, then copy the second stage image to L2SRAM and
jump to it. The second stage image is just like the general U-Boot image
to configure all the hardware and boot up to U-Boot command line.
When boot from NAND, the eLBC controller will first load the first stage
image to internal 4K RAM buffer because it's also stored on the NAND
flash. The first stage image, also call 4K NADN loader, will initialize
the L2SRAM, load the second stage image to L2SRAM and jump to it. The 4K
NAND loader's code comes from the corresponding nand_spl directory, along
with the code twisted by CONFIG_NAND_SPL.
When boot from eSDHC/eSPI, there's no such a first stage image because
the CPU ROM code does the same work. It will initialize the L2SRAM
according to the config addr/word pairs on the fixed address and
initialize the eSDHC/eSPI controller, then load the second stage image
to L2SRAM and jump to it.
The macro CONFIG_SYS_RAMBOOT is used to control the code to produce the
second stage image for all different bootup methods. It's set in the
board config file when one of the bootup methods above is selected.
Signed-off-by: Mingkai Hu <Mingkai.hu@freescale.com>
---
cpu/mpc85xx/cpu_init.c | 19 +++++++++++++++++++
cpu/mpc85xx/start.S | 23 ++++++++++++++++++++++-
cpu/mpc85xx/tlb.c | 6 ++++++
drivers/misc/fsl_law.c | 2 ++
4 files changed, 49 insertions(+), 1 deletions(-)
diff --git a/cpu/mpc85xx/cpu_init.c b/cpu/mpc85xx/cpu_init.c
index a54cf5d..5f66511 100644
--- a/cpu/mpc85xx/cpu_init.c
+++ b/cpu/mpc85xx/cpu_init.c
@@ -291,6 +291,25 @@ int cpu_init_r(void)
asm("msync;isync");
cache_ctl = l2cache->l2ctl;
+
+#if defined(CONFIG_SYS_RAMBOOT) && defined(CONFIG_SYS_INIT_L2_ADDR)
+ if (cache_ctl & MPC85xx_L2CTL_L2E) {
+ /* Clear L2 SRAM memory-mapped base address */
+ out_be32(&l2cache->l2srbar0, 0x0);
+ out_be32(&l2cache->l2srbar1, 0x0);
+
+ /* set MBECCDIS=0, SBECCDIS=0 */
+ clrbits_be32(&l2cache->l2errdis,
+ (MPC85xx_L2ERRDIS_MBECC |
+ MPC85xx_L2ERRDIS_SBECC));
+
+ /* set L2E=0, L2SRAM=0 */
+ clrbits_be32(&l2cache->l2ctl,
+ (MPC85xx_L2CTL_L2E |
+ MPC85xx_L2CTL_L2SRAM_ENTIRE));
+ }
+#endif
+
l2siz_field = (cache_ctl >> 28) & 0x3;
switch (l2siz_field) {
diff --git a/cpu/mpc85xx/start.S b/cpu/mpc85xx/start.S
index e21a4eb..c5b6bd9 100644
--- a/cpu/mpc85xx/start.S
+++ b/cpu/mpc85xx/start.S
@@ -57,10 +57,12 @@
GOT_ENTRY(_GOT2_TABLE_)
GOT_ENTRY(_FIXUP_TABLE_)
+#ifndef CONFIG_NAND_SPL
GOT_ENTRY(_start)
GOT_ENTRY(_start_of_vectors)
GOT_ENTRY(_end_of_vectors)
GOT_ENTRY(transfer_to_handler)
+#endif
GOT_ENTRY(__init_end)
GOT_ENTRY(_end)
@@ -235,10 +237,11 @@ _start_e500:
#endif /* CONFIG_MPC8569 */
- /* create a temp mapping in AS=1 to the 4M boot window */
lis r6,FSL_BOOKE_MAS0(1, 15, 0)@h
ori r6,r6,FSL_BOOKE_MAS0(1, 15, 0)@l
+#ifndef CONFIG_SYS_RAMBOOT
+ /* create a temp mapping in AS=1 to the 4M boot window */
lis r7,FSL_BOOKE_MAS1(1, 1, 0, 1, BOOKE_PAGESZ_4M)@h
ori r7,r7,FSL_BOOKE_MAS1(1, 1, 0, 1, BOOKE_PAGESZ_4M)@l
@@ -248,6 +251,20 @@ _start_e500:
/* The 85xx has the default boot window 0xff800000 - 0xffffffff */
lis r9,FSL_BOOKE_MAS3(0xffc00000, 0, (MAS3_SX|MAS3_SW|MAS3_SR))@h
ori r9,r9,FSL_BOOKE_MAS3(0xffc00000, 0, (MAS3_SX|MAS3_SW|MAS3_SR))@l
+#else
+ /*
+ * create a temp mapping in AS=1 to the 1M TEXT_BASE space, the main
+ * image has been relocated to TEXT_BASE on the second stage.
+ */
+ lis r7,FSL_BOOKE_MAS1(1, 1, 0, 1, BOOKE_PAGESZ_1M)@h
+ ori r7,r7,FSL_BOOKE_MAS1(1, 1, 0, 1, BOOKE_PAGESZ_1M)@l
+
+ lis r8,FSL_BOOKE_MAS2(TEXT_BASE, (MAS2_I|MAS2_G))@h
+ ori r8,r8,FSL_BOOKE_MAS2(TEXT_BASE, (MAS2_I|MAS2_G))@l
+
+ lis r9,FSL_BOOKE_MAS3(TEXT_BASE, 0, (MAS3_SX|MAS3_SW|MAS3_SR))@h
+ ori r9,r9,FSL_BOOKE_MAS3(TEXT_BASE, 0, (MAS3_SX|MAS3_SW|MAS3_SR))@l
+#endif
mtspr MAS0,r6
mtspr MAS1,r7
@@ -359,6 +376,7 @@ _start_cont:
bl board_init_f
isync
+#ifndef CONFIG_NAND_SPL
. = EXC_OFF_SYS_RESET
.globl _start_of_vectors
_start_of_vectors:
@@ -813,6 +831,7 @@ in32:
in32r:
lwbrx r3,r0,r3
blr
+#endif /* !CONFIG_NAND_SPL */
/*------------------------------------------------------------------------------*/
@@ -975,6 +994,7 @@ clear_bss:
mr r4,r10 /* Destination Address */
bl board_init_r
+#ifndef CONFIG_NAND_SPL
/*
* Copy exception vector code to low memory
*
@@ -1128,3 +1148,4 @@ setup_ivors:
#include "fixed_ivor.S"
blr
+#endif /* !CONFIG_NAND_SPL */
diff --git a/cpu/mpc85xx/tlb.c b/cpu/mpc85xx/tlb.c
index 0497a29..9c7c928 100644
--- a/cpu/mpc85xx/tlb.c
+++ b/cpu/mpc85xx/tlb.c
@@ -59,6 +59,7 @@ void set_tlb(u8 tlb, u32 epn, u64 rpn,
#endif
}
+#ifndef CONFIG_NAND_SPL
void disable_tlb(u8 esel)
{
u32 _mas0, _mas1, _mas2, _mas3, _mas7;
@@ -83,6 +84,7 @@ void disable_tlb(u8 esel)
addrmap_set_entry(0, 0, 0, esel);
#endif
}
+#endif
void invalidate_tlb(u8 tlb)
{
@@ -106,6 +108,7 @@ void init_tlbs(void)
return ;
}
+#ifdef CONFIG_ADDR_MAP
static void tlbsx (const volatile unsigned *addr)
{
__asm__ __volatile__ ("tlbsx 0,%0" : : "r" (addr), "m" (*addr));
@@ -132,6 +135,7 @@ int find_tlb_idx(void *addr, u8 tlbsel)
return -1;
}
+#endif
#ifdef CONFIG_ADDR_MAP
void init_addr_map(void)
@@ -168,6 +172,7 @@ void init_addr_map(void)
}
#endif
+#ifndef CONFIG_NAND_SPL
#ifndef CONFIG_SYS_DDR_TLB_START
#define CONFIG_SYS_DDR_TLB_START 8
#endif
@@ -215,3 +220,4 @@ unsigned int setup_ddr_tlbs(unsigned int memsize_in_meg)
*/
return memsize_in_meg;
}
+#endif /* !CONFIG_NAND_SPL */
diff --git a/drivers/misc/fsl_law.c b/drivers/misc/fsl_law.c
index 7bdd355..aa877c6 100644
--- a/drivers/misc/fsl_law.c
+++ b/drivers/misc/fsl_law.c
@@ -74,6 +74,7 @@ int set_next_law(phys_addr_t addr, enum law_size sz, enum law_trgt_if id)
return idx;
}
+#ifndef CONFIG_NAND_SPL
int set_last_law(phys_addr_t addr, enum law_size sz, enum law_trgt_if id)
{
u32 idx;
@@ -166,6 +167,7 @@ int set_ddr_laws(u64 start, u64 sz, enum law_trgt_if id)
return 0;
}
+#endif
void init_laws(void)
{
--
1.6.4
^ permalink raw reply related [flat|nested] 8+ messages in thread
* [U-Boot] [PATCH v2 1/5] 85xx: add boot from NAND/eSDHC/eSPI support
2009-09-11 2:53 ` [U-Boot] [PATCH v2 1/5] 85xx: add " Mingkai Hu
@ 2009-09-11 3:12 ` Kumar Gala
2009-09-11 3:20 ` Hu Mingkai-B21284
0 siblings, 1 reply; 8+ messages in thread
From: Kumar Gala @ 2009-09-11 3:12 UTC (permalink / raw)
To: u-boot
On Sep 10, 2009, at 9:53 PM, Mingkai Hu wrote:
> diff --git a/cpu/mpc85xx/tlb.c b/cpu/mpc85xx/tlb.c
> index 0497a29..9c7c928 100644
> --- a/cpu/mpc85xx/tlb.c
> +++ b/cpu/mpc85xx/tlb.c
> @@ -59,6 +59,7 @@ void set_tlb(u8 tlb, u32 epn, u64 rpn,
> #endif
> }
>
> +#ifndef CONFIG_NAND_SPL
> void disable_tlb(u8 esel)
> {
> u32 _mas0, _mas1, _mas2, _mas3, _mas7;
> @@ -83,6 +84,7 @@ void disable_tlb(u8 esel)
> addrmap_set_entry(0, 0, 0, esel);
> #endif
> }
> +#endif
>
> void invalidate_tlb(u8 tlb)
> {
> @@ -106,6 +108,7 @@ void init_tlbs(void)
> return ;
> }
>
> +#ifdef CONFIG_ADDR_MAP
why ADDR_MAP?
- k
> static void tlbsx (const volatile unsigned *addr)
> {
> __asm__ __volatile__ ("tlbsx 0,%0" : : "r" (addr), "m" (*addr));
> @@ -132,6 +135,7 @@ int find_tlb_idx(void *addr, u8 tlbsel)
>
> return -1;
> }
> +#endif
>
> #ifdef CONFIG_ADDR_MAP
> void init_addr_map(void)
> @@ -168,6 +172,7 @@ void init_addr_map(void)
> }
> #endif
>
> +#ifndef CONFIG_NAND_SPL
> #ifndef CONFIG_SYS_DDR_TLB_START
> #define CONFIG_SYS_DDR_TLB_START 8
> #endif
> @@ -215,3 +220,4 @@ unsigned int setup_ddr_tlbs(unsigned int
> memsize_in_meg)
> */
> return memsize_in_meg;
> }
> +#endif /* !CONFIG_NAND_SPL */
^ permalink raw reply [flat|nested] 8+ messages in thread
* [U-Boot] [PATCH v2 1/5] 85xx: add boot from NAND/eSDHC/eSPI support
@ 2009-09-11 3:17 Mingkai Hu
2009-09-11 13:37 ` Wolfgang Denk
2009-09-11 18:06 ` Scott Wood
0 siblings, 2 replies; 8+ messages in thread
From: Mingkai Hu @ 2009-09-11 3:17 UTC (permalink / raw)
To: u-boot
The MPC8536E is capable of booting form NAND/eSDHC/eSPI, this patch
implements these three bootup methods in a unified way - all of these
use the general cpu/mpc85xx/start.S, and load the main image to L2SRAM
which lets us use the SPD to initialize the SDRAM.
For all three bootup methods, the bootup process can be divided into two
stages: the first stage will initialize the corresponding controller,
configure the L2SRAM, then copy the second stage image to L2SRAM and
jump to it. The second stage image is just like the general U-Boot image
to configure all the hardware and boot up to U-Boot command line.
When boot from NAND, the eLBC controller will first load the first stage
image to internal 4K RAM buffer because it's also stored on the NAND
flash. The first stage image, also call 4K NADN loader, will initialize
the L2SRAM, load the second stage image to L2SRAM and jump to it. The 4K
NAND loader's code comes from the corresponding nand_spl directory, along
with the code twisted by CONFIG_NAND_SPL.
When boot from eSDHC/eSPI, there's no such a first stage image because
the CPU ROM code does the same work. It will initialize the L2SRAM
according to the config addr/word pairs on the fixed address and
initialize the eSDHC/eSPI controller, then load the second stage image
to L2SRAM and jump to it.
The macro CONFIG_SYS_RAMBOOT is used to control the code to produce the
second stage image for all different bootup methods. It's set in the
board config file when one of the bootup methods above is selected.
Signed-off-by: Mingkai Hu <Mingkai.hu@freescale.com>
---
cpu/mpc85xx/cpu_init.c | 19 +++++++++++++++++++
cpu/mpc85xx/start.S | 23 ++++++++++++++++++++++-
cpu/mpc85xx/tlb.c | 6 ++++++
drivers/misc/fsl_law.c | 2 ++
4 files changed, 49 insertions(+), 1 deletions(-)
diff --git a/cpu/mpc85xx/cpu_init.c b/cpu/mpc85xx/cpu_init.c
index a54cf5d..5f66511 100644
--- a/cpu/mpc85xx/cpu_init.c
+++ b/cpu/mpc85xx/cpu_init.c
@@ -291,6 +291,25 @@ int cpu_init_r(void)
asm("msync;isync");
cache_ctl = l2cache->l2ctl;
+
+#if defined(CONFIG_SYS_RAMBOOT) && defined(CONFIG_SYS_INIT_L2_ADDR)
+ if (cache_ctl & MPC85xx_L2CTL_L2E) {
+ /* Clear L2 SRAM memory-mapped base address */
+ out_be32(&l2cache->l2srbar0, 0x0);
+ out_be32(&l2cache->l2srbar1, 0x0);
+
+ /* set MBECCDIS=0, SBECCDIS=0 */
+ clrbits_be32(&l2cache->l2errdis,
+ (MPC85xx_L2ERRDIS_MBECC |
+ MPC85xx_L2ERRDIS_SBECC));
+
+ /* set L2E=0, L2SRAM=0 */
+ clrbits_be32(&l2cache->l2ctl,
+ (MPC85xx_L2CTL_L2E |
+ MPC85xx_L2CTL_L2SRAM_ENTIRE));
+ }
+#endif
+
l2siz_field = (cache_ctl >> 28) & 0x3;
switch (l2siz_field) {
diff --git a/cpu/mpc85xx/start.S b/cpu/mpc85xx/start.S
index e21a4eb..c5b6bd9 100644
--- a/cpu/mpc85xx/start.S
+++ b/cpu/mpc85xx/start.S
@@ -57,10 +57,12 @@
GOT_ENTRY(_GOT2_TABLE_)
GOT_ENTRY(_FIXUP_TABLE_)
+#ifndef CONFIG_NAND_SPL
GOT_ENTRY(_start)
GOT_ENTRY(_start_of_vectors)
GOT_ENTRY(_end_of_vectors)
GOT_ENTRY(transfer_to_handler)
+#endif
GOT_ENTRY(__init_end)
GOT_ENTRY(_end)
@@ -235,10 +237,11 @@ _start_e500:
#endif /* CONFIG_MPC8569 */
- /* create a temp mapping in AS=1 to the 4M boot window */
lis r6,FSL_BOOKE_MAS0(1, 15, 0)@h
ori r6,r6,FSL_BOOKE_MAS0(1, 15, 0)@l
+#ifndef CONFIG_SYS_RAMBOOT
+ /* create a temp mapping in AS=1 to the 4M boot window */
lis r7,FSL_BOOKE_MAS1(1, 1, 0, 1, BOOKE_PAGESZ_4M)@h
ori r7,r7,FSL_BOOKE_MAS1(1, 1, 0, 1, BOOKE_PAGESZ_4M)@l
@@ -248,6 +251,20 @@ _start_e500:
/* The 85xx has the default boot window 0xff800000 - 0xffffffff */
lis r9,FSL_BOOKE_MAS3(0xffc00000, 0, (MAS3_SX|MAS3_SW|MAS3_SR))@h
ori r9,r9,FSL_BOOKE_MAS3(0xffc00000, 0, (MAS3_SX|MAS3_SW|MAS3_SR))@l
+#else
+ /*
+ * create a temp mapping in AS=1 to the 1M TEXT_BASE space, the main
+ * image has been relocated to TEXT_BASE on the second stage.
+ */
+ lis r7,FSL_BOOKE_MAS1(1, 1, 0, 1, BOOKE_PAGESZ_1M)@h
+ ori r7,r7,FSL_BOOKE_MAS1(1, 1, 0, 1, BOOKE_PAGESZ_1M)@l
+
+ lis r8,FSL_BOOKE_MAS2(TEXT_BASE, (MAS2_I|MAS2_G))@h
+ ori r8,r8,FSL_BOOKE_MAS2(TEXT_BASE, (MAS2_I|MAS2_G))@l
+
+ lis r9,FSL_BOOKE_MAS3(TEXT_BASE, 0, (MAS3_SX|MAS3_SW|MAS3_SR))@h
+ ori r9,r9,FSL_BOOKE_MAS3(TEXT_BASE, 0, (MAS3_SX|MAS3_SW|MAS3_SR))@l
+#endif
mtspr MAS0,r6
mtspr MAS1,r7
@@ -359,6 +376,7 @@ _start_cont:
bl board_init_f
isync
+#ifndef CONFIG_NAND_SPL
. = EXC_OFF_SYS_RESET
.globl _start_of_vectors
_start_of_vectors:
@@ -813,6 +831,7 @@ in32:
in32r:
lwbrx r3,r0,r3
blr
+#endif /* !CONFIG_NAND_SPL */
/*------------------------------------------------------------------------------*/
@@ -975,6 +994,7 @@ clear_bss:
mr r4,r10 /* Destination Address */
bl board_init_r
+#ifndef CONFIG_NAND_SPL
/*
* Copy exception vector code to low memory
*
@@ -1128,3 +1148,4 @@ setup_ivors:
#include "fixed_ivor.S"
blr
+#endif /* !CONFIG_NAND_SPL */
diff --git a/cpu/mpc85xx/tlb.c b/cpu/mpc85xx/tlb.c
index 0497a29..3fc7bd5 100644
--- a/cpu/mpc85xx/tlb.c
+++ b/cpu/mpc85xx/tlb.c
@@ -59,6 +59,7 @@ void set_tlb(u8 tlb, u32 epn, u64 rpn,
#endif
}
+#ifndef CONFIG_NAND_SPL
void disable_tlb(u8 esel)
{
u32 _mas0, _mas1, _mas2, _mas3, _mas7;
@@ -83,6 +84,7 @@ void disable_tlb(u8 esel)
addrmap_set_entry(0, 0, 0, esel);
#endif
}
+#endif
void invalidate_tlb(u8 tlb)
{
@@ -106,6 +108,7 @@ void init_tlbs(void)
return ;
}
+#ifdef CONFIG_NADN_SPL
static void tlbsx (const volatile unsigned *addr)
{
__asm__ __volatile__ ("tlbsx 0,%0" : : "r" (addr), "m" (*addr));
@@ -132,6 +135,7 @@ int find_tlb_idx(void *addr, u8 tlbsel)
return -1;
}
+#endif
#ifdef CONFIG_ADDR_MAP
void init_addr_map(void)
@@ -168,6 +172,7 @@ void init_addr_map(void)
}
#endif
+#ifndef CONFIG_NAND_SPL
#ifndef CONFIG_SYS_DDR_TLB_START
#define CONFIG_SYS_DDR_TLB_START 8
#endif
@@ -215,3 +220,4 @@ unsigned int setup_ddr_tlbs(unsigned int memsize_in_meg)
*/
return memsize_in_meg;
}
+#endif /* !CONFIG_NAND_SPL */
diff --git a/drivers/misc/fsl_law.c b/drivers/misc/fsl_law.c
index 7bdd355..aa877c6 100644
--- a/drivers/misc/fsl_law.c
+++ b/drivers/misc/fsl_law.c
@@ -74,6 +74,7 @@ int set_next_law(phys_addr_t addr, enum law_size sz, enum law_trgt_if id)
return idx;
}
+#ifndef CONFIG_NAND_SPL
int set_last_law(phys_addr_t addr, enum law_size sz, enum law_trgt_if id)
{
u32 idx;
@@ -166,6 +167,7 @@ int set_ddr_laws(u64 start, u64 sz, enum law_trgt_if id)
return 0;
}
+#endif
void init_laws(void)
{
--
1.6.4
^ permalink raw reply related [flat|nested] 8+ messages in thread
* [U-Boot] [PATCH v2 1/5] 85xx: add boot from NAND/eSDHC/eSPI support
2009-09-11 3:12 ` Kumar Gala
@ 2009-09-11 3:20 ` Hu Mingkai-B21284
0 siblings, 0 replies; 8+ messages in thread
From: Hu Mingkai-B21284 @ 2009-09-11 3:20 UTC (permalink / raw)
To: u-boot
> -----Original Message-----
> From: Gala Kumar-B11780
> Sent: Friday, September 11, 2009 11:13 AM
> To: Hu Mingkai-B21284
> Cc: u-boot at lists.denx.de; Wood Scott-B07421
> Subject: Re: [PATCH v2 1/5] 85xx: add boot from
> NAND/eSDHC/eSPI support
>
>
> On Sep 10, 2009, at 9:53 PM, Mingkai Hu wrote:
>
> > diff --git a/cpu/mpc85xx/tlb.c b/cpu/mpc85xx/tlb.c index
> > 0497a29..9c7c928 100644
> > --- a/cpu/mpc85xx/tlb.c
> > +++ b/cpu/mpc85xx/tlb.c
> > @@ -59,6 +59,7 @@ void set_tlb(u8 tlb, u32 epn, u64 rpn, #endif }
> >
> > +#ifndef CONFIG_NAND_SPL
> > void disable_tlb(u8 esel)
> > {
> > u32 _mas0, _mas1, _mas2, _mas3, _mas7; @@ -83,6 +84,7 @@ void
> > disable_tlb(u8 esel)
> > addrmap_set_entry(0, 0, 0, esel);
> > #endif
> > }
> > +#endif
> >
> > void invalidate_tlb(u8 tlb)
> > {
> > @@ -106,6 +108,7 @@ void init_tlbs(void)
> > return ;
> > }
> >
> > +#ifdef CONFIG_ADDR_MAP
>
> why ADDR_MAP?
>
Oh..., sorry, copy error, it should be NAND_SPL. I'll send it again.
Without this, the 4K NAND loader size will over 4K.
Thanks,
Mingkai
^ permalink raw reply [flat|nested] 8+ messages in thread
* [U-Boot] [PATCH v2 1/5] 85xx: add boot from NAND/eSDHC/eSPI support
2009-09-11 3:17 [U-Boot] [PATCH v2 1/5] 85xx: add boot from NAND/eSDHC/eSPI support Mingkai Hu
@ 2009-09-11 13:37 ` Wolfgang Denk
2009-09-14 2:33 ` Hu Mingkai-B21284
2009-09-11 18:06 ` Scott Wood
1 sibling, 1 reply; 8+ messages in thread
From: Wolfgang Denk @ 2009-09-11 13:37 UTC (permalink / raw)
To: u-boot
Dear Mingkai Hu,
In message <1252639077-29277-1-git-send-email-Mingkai.hu@freescale.com> you wrote:
> The MPC8536E is capable of booting form NAND/eSDHC/eSPI, this patch
> implements these three bootup methods in a unified way - all of these
> use the general cpu/mpc85xx/start.S, and load the main image to L2SRAM
> which lets us use the SPD to initialize the SDRAM.
...
I'm confused.
Is this v2 reposted? Or an updated version?
Could you please be so kind and always note (below the "---" line)
what has changed against the previous version of the patch?
Thanks.
Best regards,
Wolfgang Denk
--
DENX Software Engineering GmbH, MD: Wolfgang Denk & Detlev Zundel
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
Phone: (+49)-8142-66989-10 Fax: (+49)-8142-66989-80 Email: wd at denx.de
You have the capacity to learn from mistakes. You'll learn a lot
today.
^ permalink raw reply [flat|nested] 8+ messages in thread
* [U-Boot] [PATCH v2 1/5] 85xx: add boot from NAND/eSDHC/eSPI support
2009-09-11 3:17 [U-Boot] [PATCH v2 1/5] 85xx: add boot from NAND/eSDHC/eSPI support Mingkai Hu
2009-09-11 13:37 ` Wolfgang Denk
@ 2009-09-11 18:06 ` Scott Wood
2009-09-11 18:07 ` Kumar Gala
1 sibling, 1 reply; 8+ messages in thread
From: Scott Wood @ 2009-09-11 18:06 UTC (permalink / raw)
To: u-boot
Mingkai Hu wrote:
> The MPC8536E is capable of booting form NAND/eSDHC/eSPI, this patch
> implements these three bootup methods in a unified way - all of these
> use the general cpu/mpc85xx/start.S, and load the main image to L2SRAM
> which lets us use the SPD to initialize the SDRAM.
>
> For all three bootup methods, the bootup process can be divided into two
> stages: the first stage will initialize the corresponding controller,
> configure the L2SRAM, then copy the second stage image to L2SRAM and
> jump to it. The second stage image is just like the general U-Boot image
> to configure all the hardware and boot up to U-Boot command line.
>
> When boot from NAND, the eLBC controller will first load the first stage
> image to internal 4K RAM buffer because it's also stored on the NAND
> flash. The first stage image, also call 4K NADN loader, will initialize
s/NADN/NAND/ here...
> +#ifdef CONFIG_NADN_SPL
> static void tlbsx (const volatile unsigned *addr)
And more importantly, here.
-Scott
^ permalink raw reply [flat|nested] 8+ messages in thread
* [U-Boot] [PATCH v2 1/5] 85xx: add boot from NAND/eSDHC/eSPI support
2009-09-11 18:06 ` Scott Wood
@ 2009-09-11 18:07 ` Kumar Gala
0 siblings, 0 replies; 8+ messages in thread
From: Kumar Gala @ 2009-09-11 18:07 UTC (permalink / raw)
To: u-boot
On Sep 11, 2009, at 1:06 PM, Scott Wood wrote:
> Mingkai Hu wrote:
>> The MPC8536E is capable of booting form NAND/eSDHC/eSPI, this patch
>> implements these three bootup methods in a unified way - all of these
>> use the general cpu/mpc85xx/start.S, and load the main image to
>> L2SRAM
>> which lets us use the SPD to initialize the SDRAM.
>>
>> For all three bootup methods, the bootup process can be divided
>> into two
>> stages: the first stage will initialize the corresponding controller,
>> configure the L2SRAM, then copy the second stage image to L2SRAM and
>> jump to it. The second stage image is just like the general U-Boot
>> image
>> to configure all the hardware and boot up to U-Boot command line.
>>
>> When boot from NAND, the eLBC controller will first load the first
>> stage
>> image to internal 4K RAM buffer because it's also stored on the NAND
>> flash. The first stage image, also call 4K NADN loader, will
>> initialize
>
> s/NADN/NAND/ here...
will fix this one.
>> +#ifdef CONFIG_NADN_SPL
>> static void tlbsx (const volatile unsigned *addr)
>
> And more importantly, here.
I've fixed that one.. see my latest v4 patch.
- k
^ permalink raw reply [flat|nested] 8+ messages in thread
* [U-Boot] [PATCH v2 1/5] 85xx: add boot from NAND/eSDHC/eSPI support
2009-09-11 13:37 ` Wolfgang Denk
@ 2009-09-14 2:33 ` Hu Mingkai-B21284
0 siblings, 0 replies; 8+ messages in thread
From: Hu Mingkai-B21284 @ 2009-09-14 2:33 UTC (permalink / raw)
To: u-boot
> -----Original Message-----
> From: Wolfgang Denk [mailto:wd at denx.de]
> Sent: Friday, September 11, 2009 9:37 PM
> To: Hu Mingkai-B21284
> Cc: u-boot at lists.denx.de; Wood Scott-B07421; Gala Kumar-B11780
> Subject: Re: [U-Boot] [PATCH v2 1/5] 85xx: add boot from
> NAND/eSDHC/eSPI support
>
> Dear Mingkai Hu,
>
> In message
> <1252639077-29277-1-git-send-email-Mingkai.hu@freescale.com>
> you wrote:
> > The MPC8536E is capable of booting form NAND/eSDHC/eSPI, this patch
> > implements these three bootup methods in a unified way -
> all of these
> > use the general cpu/mpc85xx/start.S, and load the main
> image to L2SRAM
> > which lets us use the SPD to initialize the SDRAM.
>
> ...
>
> I'm confused.
>
> Is this v2 reposted? Or an updated version?
>
> Could you please be so kind and always note (below the "---"
> line) what has changed against the previous version of the patch?
>
Sorry for the confusion, this should be version 3. I'll make the note
in the furture.
This patch's modification against v2:
- Use the NADN_SPL to comment the tlbsx and find_tlb_idx function for
4K NAND loader
Thanks,
Mingkai
^ permalink raw reply [flat|nested] 8+ messages in thread
end of thread, other threads:[~2009-09-14 2:33 UTC | newest]
Thread overview: 8+ messages (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
2009-09-11 3:17 [U-Boot] [PATCH v2 1/5] 85xx: add boot from NAND/eSDHC/eSPI support Mingkai Hu
2009-09-11 13:37 ` Wolfgang Denk
2009-09-14 2:33 ` Hu Mingkai-B21284
2009-09-11 18:06 ` Scott Wood
2009-09-11 18:07 ` Kumar Gala
-- strict thread matches above, loose matches on Subject: below --
2009-09-11 2:53 [U-Boot] [PATCH v2 0/5] Add " Mingkai Hu
2009-09-11 2:53 ` [U-Boot] [PATCH v2 1/5] 85xx: add " Mingkai Hu
2009-09-11 3:12 ` Kumar Gala
2009-09-11 3:20 ` Hu Mingkai-B21284
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.