From: Patrick Scharrenberg <pittipatti@web.de>
To: Jeremy Fitzhardinge <jeremy@goop.org>
Cc: Xen-devel <xen-devel@lists.xensource.com>
Subject: pvops: AHCI problems with SB600
Date: Sat, 19 Sep 2009 16:46:16 +0200 [thread overview]
Message-ID: <4AB4EEB8.7050107@web.de> (raw)
In-Reply-To: <4AB431AD.1030205@goop.org>
[-- Attachment #1: Type: text/plain, Size: 312 bytes --]
Hi,
I just tested this branch and found that the system gets stuck on
initializing the AHCI controller (AMD SB600).
Please find the error messages attached as png (unfortunately netconsole
doesn't work either)
When booting the same kernel natively without xen, all works fine
(including netconsole).
Patrick
[-- Attachment #2: sb600.png --]
[-- Type: image/png, Size: 24486 bytes --]
[-- Attachment #3: lspci-nvnv --]
[-- Type: text/plain, Size: 14520 bytes --]
00:00.0 Host bridge [0600]: ATI Technologies Inc RS690 Host Bridge [1002:7910]
Subsystem: ASUSTeK Computer Inc. Device [1043:826d]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz+ UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort+ >SERR- <PERR- INTx-
Latency: 64
00:01.0 PCI bridge [0604]: ATI Technologies Inc RS690 PCI to PCI Bridge (Internal gfx) [1002:7912] (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz+ UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 99
Bus: primary=00, secondary=01, subordinate=01, sec-latency=68
I/O behind bridge: 0000d000-0000dfff
Memory behind bridge: fdb00000-fdcfffff
Prefetchable memory behind bridge: 00000000fa000000-00000000fbffffff
Secondary status: 66MHz+ FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- <SERR- <PERR-
BridgeCtl: Parity- SERR- NoISA- VGA+ MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: [44] HyperTransport: MSI Mapping Enable+ Fixed+
Capabilities: [b0] Subsystem: ATI Technologies Inc RS690 PCI to PCI Bridge (Internal gfx) [1002:7912]
00:07.0 PCI bridge [0604]: ATI Technologies Inc RS690 PCI to PCI Bridge (PCI Express Port 3) [1002:7917] (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 32 bytes
Bus: primary=00, secondary=02, subordinate=02, sec-latency=0
I/O behind bridge: 0000e000-0000efff
Memory behind bridge: fda00000-fdafffff
Prefetchable memory behind bridge: 00000000fdf00000-00000000fdffffff
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR-
BridgeCtl: Parity- SERR- NoISA- VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: [50] Power Management version 3
Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0+,D1-,D2-,D3hot+,D3cold+)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-
Capabilities: [58] Express (v1) Root Port (Slot-), MSI 00
DevCap: MaxPayload 128 bytes, PhantFunc 0, Latency L0s <64ns, L1 <1us
ExtTag+ RBE+ FLReset-
DevCtl: Report errors: Correctable- Non-Fatal- Fatal- Unsupported-
RlxdOrd+ ExtTag- PhantFunc- AuxPwr- NoSnoop+
MaxPayload 128 bytes, MaxReadReq 128 bytes
DevSta: CorrErr- UncorrErr- FatalErr- UnsuppReq- AuxPwr- TransPend-
LnkCap: Port #4, Speed 2.5GT/s, Width x1, ASPM L0s L1, Latency L0 <64ns, L1 <1us
ClockPM- Suprise- LLActRep+ BwNot-
LnkCtl: ASPM Disabled; RCB 64 bytes Disabled- Retrain- CommClk-
ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt-
LnkSta: Speed 2.5GT/s, Width x1, TrErr- Train- SlotClk+ DLActive+ BWMgmt- ABWMgmt-
RootCtl: ErrCorrectable- ErrNon-Fatal- ErrFatal- PMEIntEna- CRSVisible+
RootCap: CRSVisible-
RootSta: PME ReqID 0000, PMEStatus- PMEPending-
Capabilities: [80] Message Signalled Interrupts: Mask- 64bit- Queue=0/0 Enable-
Address: 00000000 Data: 0000
Capabilities: [b0] Subsystem: ASUSTeK Computer Inc. Device [1043:826d]
Capabilities: [b8] HyperTransport: MSI Mapping Enable+ Fixed+
00:12.0 SATA controller [0106]: ATI Technologies Inc SB600 Non-Raid-5 SATA [1002:4380] (prog-if 01 [AHCI 1.0])
Subsystem: ASUSTeK Computer Inc. Device [1043:8231]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz+ UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 64
Interrupt: pin A routed to IRQ 16
Region 0: I/O ports at ff00 [size=8]
Region 1: I/O ports at fe00 [size=4]
Region 2: I/O ports at fd00 [size=8]
Region 3: I/O ports at fc00 [size=4]
Region 4: I/O ports at fb00 [size=16]
Region 5: Memory at fe02f000 (32-bit, non-prefetchable) [size=1K]
Capabilities: [60] Power Management version 2
Flags: PMEClk- DSI+ D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-
Kernel driver in use: ahci
Kernel modules: ahci
00:13.0 USB Controller [0c03]: ATI Technologies Inc SB600 USB (OHCI0) [1002:4387] (prog-if 10 [OHCI])
Subsystem: ASUSTeK Computer Inc. Device [1043:81ef]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 64, Cache Line Size: 32 bytes
Interrupt: pin A routed to IRQ 17
Region 0: Memory at fe02e000 (32-bit, non-prefetchable) [size=4K]
Kernel driver in use: ohci_hcd
Kernel modules: ohci-hcd
00:13.1 USB Controller [0c03]: ATI Technologies Inc SB600 USB (OHCI1) [1002:4388] (prog-if 10 [OHCI])
Subsystem: ASUSTeK Computer Inc. Device [1043:81ef]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 64, Cache Line Size: 32 bytes
Interrupt: pin B routed to IRQ 18
Region 0: Memory at fe02d000 (32-bit, non-prefetchable) [size=4K]
Kernel driver in use: ohci_hcd
Kernel modules: ohci-hcd
00:13.2 USB Controller [0c03]: ATI Technologies Inc SB600 USB (OHCI2) [1002:4389] (prog-if 10 [OHCI])
Subsystem: ASUSTeK Computer Inc. Device [1043:81ef]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 64, Cache Line Size: 32 bytes
Interrupt: pin C routed to IRQ 19
Region 0: Memory at fe02c000 (32-bit, non-prefetchable) [size=4K]
Kernel driver in use: ohci_hcd
Kernel modules: ohci-hcd
00:13.3 USB Controller [0c03]: ATI Technologies Inc SB600 USB (OHCI3) [1002:438a] (prog-if 10 [OHCI])
Subsystem: ASUSTeK Computer Inc. Device [1043:81ef]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 64, Cache Line Size: 32 bytes
Interrupt: pin B routed to IRQ 18
Region 0: Memory at fe02b000 (32-bit, non-prefetchable) [size=4K]
Kernel driver in use: ohci_hcd
Kernel modules: ohci-hcd
00:13.4 USB Controller [0c03]: ATI Technologies Inc SB600 USB (OHCI4) [1002:438b] (prog-if 10 [OHCI])
Subsystem: ASUSTeK Computer Inc. Device [1043:81ef]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 64, Cache Line Size: 32 bytes
Interrupt: pin C routed to IRQ 19
Region 0: Memory at fe02a000 (32-bit, non-prefetchable) [size=4K]
Kernel driver in use: ohci_hcd
Kernel modules: ohci-hcd
00:13.5 USB Controller [0c03]: ATI Technologies Inc SB600 USB Controller (EHCI) [1002:4386] (prog-if 20 [EHCI])
Subsystem: ASUSTeK Computer Inc. Device [1043:81ef]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 64, Cache Line Size: 64 bytes
Interrupt: pin D routed to IRQ 20
Region 0: Memory at fe029000 (32-bit, non-prefetchable) [size=256]
Capabilities: [c0] Power Management version 2
Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA PME(D0+,D1+,D2+,D3hot+,D3cold-)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-
Bridge: PM- B3+
Capabilities: [e4] Debug port: BAR=1 offset=00e0
Kernel driver in use: ehci_hcd
Kernel modules: ehci-hcd
00:14.0 SMBus [0c05]: ATI Technologies Inc SBx00 SMBus Controller [1002:4385] (rev 14)
Subsystem: ASUSTeK Computer Inc. Device [1043:81ef]
Control: I/O+ Mem+ BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz+ UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Region 0: I/O ports at 0b00 [size=16]
Capabilities: [b0] HyperTransport: MSI Mapping Enable- Fixed+
00:14.1 IDE interface [0101]: ATI Technologies Inc SB600 IDE [1002:438c] (prog-if 8a [Master SecP PriP])
Subsystem: ASUSTeK Computer Inc. Device [1043:81ef]
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz+ UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 64
Interrupt: pin A routed to IRQ 17
Region 0: I/O ports at <unassigned>
Region 1: I/O ports at <unassigned>
Region 2: I/O ports at <unassigned>
Region 3: I/O ports at <unassigned>
Region 4: I/O ports at f900 [size=16]
Kernel driver in use: ATIIXP_IDE
Kernel modules: atiixp
00:14.3 ISA bridge [0601]: ATI Technologies Inc SB600 PCI to LPC Bridge [1002:438d]
Subsystem: ASUSTeK Computer Inc. Device [1043:81ef]
Control: I/O+ Mem+ BusMaster+ SpecCycle+ MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz+ UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
00:14.4 PCI bridge [0604]: ATI Technologies Inc SBx00 PCI to PCI Bridge [1002:4384] (prog-if 01 [Subtractive decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop+ ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 64
Bus: primary=00, secondary=03, subordinate=03, sec-latency=64
I/O behind bridge: 0000c000-0000cfff
Memory behind bridge: fde00000-fdefffff
Prefetchable memory behind bridge: fdd00000-fddfffff
Secondary status: 66MHz- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort+ <SERR- <PERR-
BridgeCtl: Parity- SERR- NoISA- VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
00:18.0 Host bridge [0600]: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] HyperTransport Technology Configuration [1022:1100]
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Capabilities: [80] HyperTransport: Host or Secondary Interface
!!! Possibly incomplete decoding
Command: WarmRst+ DblEnd-
Link Control: CFlE- CST- CFE- <LkFail- Init+ EOC- TXO- <CRCErr=0
Link Config: MLWI=16bit MLWO=16bit LWI=16bit LWO=16bit
Revision ID: 1.02
00:18.1 Host bridge [0600]: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] Address Map [1022:1101]
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
00:18.2 Host bridge [0600]: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] DRAM Controller [1022:1102]
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
00:18.3 Host bridge [0600]: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] Miscellaneous Control [1022:1103]
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Capabilities: [f0] Secure device <?>
01:05.0 VGA compatible controller [0300]: ATI Technologies Inc RS690 [Radeon X1200 Series] [1002:791e] (prog-if 00 [VGA controller])
Subsystem: ASUSTeK Computer Inc. Device [1043:826d]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 64, Cache Line Size: 32 bytes
Interrupt: pin A routed to IRQ 5
Region 0: Memory at fa000000 (64-bit, prefetchable) [size=32M]
Region 2: Memory at fdcf0000 (64-bit, non-prefetchable) [size=64K]
Region 4: I/O ports at de00 [size=256]
Region 5: Memory at fdb00000 (32-bit, non-prefetchable) [size=1M]
Capabilities: [50] Power Management version 2
Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-
Capabilities: [80] Message Signalled Interrupts: Mask- 64bit+ Queue=0/0 Enable-
Address: 0000000000000000 Data: 0000
02:00.0 Ethernet controller [0200]: Realtek Semiconductor Co., Ltd. RTL8111/8168B PCI Express Gigabit Ethernet controller [10ec:8168] (rev 01)
Subsystem: ASUSTeK Computer Inc. Device [1043:81aa]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 20
Region 0: I/O ports at ee00 [size=256]
Region 2: Memory at fdaff000 (64-bit, non-prefetchable) [size=4K]
[virtual] Expansion ROM at fdf00000 [disabled] [size=128K]
Capabilities: [40] Power Management version 2
Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=375mA PME(D0-,D1+,D2+,D3hot+,D3cold+)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-
Capabilities: [48] Vital Product Data <?>
Capabilities: [50] Message Signalled Interrupts: Mask- 64bit+ Queue=0/1 Enable-
Address: 0000000000000000 Data: 0000
Capabilities: [60] Express (v1) Endpoint, MSI 00
DevCap: MaxPayload 1024 bytes, PhantFunc 0, Latency L0s <1us, L1 unlimited
ExtTag+ AttnBtn+ AttnInd+ PwrInd+ RBE- FLReset-
DevCtl: Report errors: Correctable- Non-Fatal- Fatal- Unsupported-
RlxdOrd+ ExtTag- PhantFunc- AuxPwr- NoSnoop+
MaxPayload 128 bytes, MaxReadReq 512 bytes
DevSta: CorrErr- UncorrErr- FatalErr- UnsuppReq- AuxPwr+ TransPend-
LnkCap: Port #0, Speed 2.5GT/s, Width x1, ASPM L0s, Latency L0 unlimited, L1 unlimited
ClockPM- Suprise- LLActRep- BwNot-
LnkCtl: ASPM Disabled; RCB 64 bytes Disabled- Retrain- CommClk-
ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt-
LnkSta: Speed 2.5GT/s, Width x1, TrErr- Train- SlotClk+ DLActive- BWMgmt- ABWMgmt-
Capabilities: [84] Vendor Specific Information <?>
Kernel driver in use: r8169
Kernel modules: r8169
[-- Attachment #4: Type: text/plain, Size: 138 bytes --]
_______________________________________________
Xen-devel mailing list
Xen-devel@lists.xensource.com
http://lists.xensource.com/xen-devel
next prev parent reply other threads:[~2009-09-19 14:46 UTC|newest]
Thread overview: 122+ messages / expand[flat|nested] mbox.gz Atom feed top
2009-09-19 1:19 Announcing xen/master: pvops git trees rearranged Jeremy Fitzhardinge
2009-09-19 10:36 ` Marc - A. Dahlhaus
2009-09-20 19:29 ` Marc - A. Dahlhaus
2009-09-21 6:22 ` Pasi Kärkkäinen
2009-09-21 8:49 ` Marc - A. Dahlhaus [ Administration | Westermann GmbH ]
2009-09-21 9:03 ` Pasi Kärkkäinen
2009-09-21 9:18 ` Marc - A. Dahlhaus [ Administration | Westermann GmbH ]
2009-09-21 14:39 ` Konrad Rzeszutek Wilk
2009-09-21 16:19 ` [Cluster-devel] Re: [Xen-devel] " Marc
2009-09-21 15:20 ` Pasi Kärkkäinen
2009-09-19 14:46 ` Patrick Scharrenberg [this message]
2009-09-21 5:57 ` pvops: AHCI problems with SB600 Patrick Scharrenberg
2009-09-21 15:06 ` Konrad Rzeszutek Wilk
2009-09-22 9:00 ` Patrick Scharrenberg
2009-09-22 14:08 ` Konrad Rzeszutek Wilk
2009-09-23 7:37 ` Patrick Scharrenberg
2009-09-23 12:09 ` Konrad Rzeszutek Wilk
2009-09-23 12:06 ` Konrad Rzeszutek Wilk
2009-09-23 19:22 ` Jeremy Fitzhardinge
2009-09-23 19:32 ` Konrad Rzeszutek Wilk
2009-09-23 20:09 ` Jeremy Fitzhardinge
2009-09-23 20:30 ` Jeremy Fitzhardinge
2009-09-23 21:24 ` Konrad Rzeszutek Wilk
2009-09-23 21:56 ` Jeremy Fitzhardinge
2009-09-24 12:44 ` Konrad Rzeszutek Wilk
2009-09-24 18:23 ` Jeremy Fitzhardinge
2009-09-24 21:36 ` Konrad Rzeszutek Wilk
2009-09-24 19:12 ` Patrick Scharrenberg
2009-09-21 14:43 ` Announcing xen/master: pvops git trees rearranged (AMD tests?) Konrad Rzeszutek Wilk
2009-09-21 19:25 ` Announcing xen/master: pvops git trees rearranged Pasi Kärkkäinen
2009-09-21 19:30 ` Jeremy Fitzhardinge
2009-09-21 19:50 ` Pasi Kärkkäinen
2009-09-21 20:21 ` Jeremy Fitzhardinge
2009-09-21 20:26 ` Pasi Kärkkäinen
2009-09-21 20:29 ` Jeremy Fitzhardinge
2009-09-21 20:36 ` Pasi Kärkkäinen
2009-09-23 13:16 ` Christian Tramnitz
2009-09-23 20:13 ` Jeremy Fitzhardinge
2009-09-24 3:17 ` Qing He
2009-09-24 19:38 ` Jeremy Fitzhardinge
2009-09-24 8:15 ` Zhang, Xiantao
2009-09-25 1:44 ` Zhang, Xiantao
[not found] ` <706158FABBBA044BAD4FE898A02E4BC201C9AC7ED0@pdsmsx503.ccr.corp.intel.com>
[not found] ` <4AC54350.7040909@goop.org>
[not found] ` <706158FABBBA044BAD4FE898A02E4BC201C9AC8A88@pdsmsx503.ccr.corp.intel.com>
[not found] ` <4AD75A0B.9020508@goop.org>
[not found] ` <706158FABBBA044BAD4FE898A02E4BC201C9BD87FA@pdsmsx503.ccr.corp.intel.com>
2009-11-12 0:47 ` APIC rework Jeremy Fitzhardinge
2009-11-12 1:00 ` Jeremy Fitzhardinge
2009-11-12 23:51 ` Jeremy Fitzhardinge
2009-11-13 5:27 ` Zhang, Xiantao
2009-11-13 7:24 ` Keir Fraser
2009-11-13 23:57 ` Jeremy Fitzhardinge
2009-11-14 8:04 ` Keir Fraser
2009-11-16 10:38 ` Zhang, Xiantao
2009-11-16 18:37 ` Jeremy Fitzhardinge
2009-11-17 3:13 ` Zhang, Xiantao
2009-11-17 3:45 ` Keir Fraser
2009-11-17 5:20 ` Jeremy Fitzhardinge
2009-11-17 5:44 ` Keir Fraser
2009-11-17 12:46 ` Zhang, Xiantao
2009-11-17 13:05 ` Keir Fraser
2009-11-17 14:17 ` Zhang, Xiantao
2009-11-17 18:51 ` Jeremy Fitzhardinge
2009-11-18 3:37 ` Zhang, Xiantao
2009-11-18 14:29 ` Konrad Rzeszutek Wilk
2009-11-20 1:47 ` Zhang, Xiantao
2009-11-17 19:49 ` Keir Fraser
2009-11-18 3:12 ` Jiang, Yunhong
2009-11-18 3:25 ` Zhang, Xiantao
2009-11-18 9:37 ` Keir Fraser
2009-11-24 10:04 ` Zhang, Xiantao
2009-11-24 19:25 ` Jeremy Fitzhardinge
2009-11-25 1:42 ` Zhang, Xiantao
2009-11-24 19:44 ` Konrad Rzeszutek Wilk
2009-11-24 23:35 ` Jeremy Fitzhardinge
2009-11-25 14:10 ` Konrad Rzeszutek Wilk
2009-11-25 19:14 ` Jeremy Fitzhardinge
2009-11-30 14:26 ` Konrad Rzeszutek Wilk
2009-11-25 2:43 ` Zhang, Xiantao
2009-11-25 13:41 ` Konrad Rzeszutek Wilk
2009-11-25 15:21 ` Zhang, Xiantao
2009-11-25 18:00 ` Konrad Rzeszutek Wilk
2009-11-26 11:53 ` Zhang, Xiantao
2009-11-30 14:34 ` Konrad Rzeszutek Wilk
2009-12-03 2:13 ` Zhang, Xiantao
2009-12-03 14:38 ` Konrad Rzeszutek Wilk
2009-11-25 18:59 ` Jeremy Fitzhardinge
2009-11-26 1:11 ` Zhang, Xiantao
2009-11-18 14:15 ` Konrad Rzeszutek Wilk
2009-11-20 1:45 ` Zhang, Xiantao
2009-11-17 5:12 ` Jeremy Fitzhardinge
2009-09-24 13:20 ` Announcing xen/master: pvops git trees rearranged Christian Tramnitz
2009-09-24 17:47 ` Andy Burns
2009-09-24 18:29 ` Thiago Camargo Martins Cordeiro
2009-09-24 19:32 ` Thiago Camargo Martins Cordeiro
2009-09-24 20:00 ` Jeremy Fitzhardinge
2009-09-24 19:56 ` Jeremy Fitzhardinge
2009-10-11 15:39 ` Pasi Kärkkäinen
2009-10-12 20:02 ` Konrad Rzeszutek Wilk
2009-10-14 21:14 ` Pasi Kärkkäinen
2009-10-15 20:04 ` Konrad Rzeszutek Wilk
2009-10-16 9:01 ` Pasi Kärkkäinen
2009-10-20 16:58 ` [drm:r100_ring_test] *ERROR* radeon: ring test failed Konrad Rzeszutek Wilk
2009-10-21 11:54 ` Pasi Kärkkäinen
2009-10-21 18:31 ` Konrad Rzeszutek Wilk
2009-10-21 18:52 ` Pasi Kärkkäinen
2009-10-21 19:50 ` Jeremy Fitzhardinge
2009-10-21 20:22 ` Pasi Kärkkäinen
2009-10-27 15:46 ` Pasi Kärkkäinen
2009-10-27 17:00 ` Konrad Rzeszutek Wilk
2009-10-27 17:30 ` Pasi Kärkkäinen
2009-10-27 19:45 ` Pasi Kärkkäinen
2009-10-27 19:41 ` Konrad Rzeszutek Wilk
2009-10-27 20:18 ` Pasi Kärkkäinen
2009-10-27 20:13 ` Konrad Rzeszutek Wilk
2009-10-27 20:36 ` Pasi Kärkkäinen
2010-01-01 17:21 ` Pasi Kärkkäinen
2010-01-04 13:37 ` Konrad Rzeszutek Wilk
2010-01-04 19:42 ` Pasi Kärkkäinen
2010-01-14 20:05 ` Konrad Rzeszutek Wilk
2010-01-15 7:18 ` Pasi Kärkkäinen
2009-10-27 20:23 ` Pasi Kärkkäinen
2009-12-04 16:07 ` Announcing xen/master: pvops git trees rearranged Stefan Kuhne
2009-12-04 18:58 ` Pasi Kärkkäinen
2009-12-04 19:27 ` Jeremy Fitzhardinge
-- strict thread matches above, loose matches on Subject: below --
2009-09-19 16:07 pvops: AHCI problems with SB600 Boris Derzhavets
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=4AB4EEB8.7050107@web.de \
--to=pittipatti@web.de \
--cc=jeremy@goop.org \
--cc=xen-devel@lists.xensource.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.