All of lore.kernel.org
 help / color / mirror / Atom feed
* tickless and HZ=1000 throughput advantage?
@ 2009-09-19 14:47 Daniel J Blueman
  2009-09-19 14:55 ` Arjan van de Ven
  0 siblings, 1 reply; 6+ messages in thread
From: Daniel J Blueman @ 2009-09-19 14:47 UTC (permalink / raw)
  To: Linux Kernel

On tickless kernels, is the general consensus that for non-embedded
systems, selecting HZ=1000 gives slightly more throughput in
particular situations than HZ=100 or 250, due to finer timer
intervals/granularity?

(low HZ used to cause problems with low-rate QoS packet queues when
timer scheduling was selected)

Thanks,
  Daniel
-- 
Daniel J Blueman

^ permalink raw reply	[flat|nested] 6+ messages in thread

* Re: tickless and HZ=1000 throughput advantage?
  2009-09-19 14:47 tickless and HZ=1000 throughput advantage? Daniel J Blueman
@ 2009-09-19 14:55 ` Arjan van de Ven
  2009-09-19 17:50   ` Daniel J Blueman
  0 siblings, 1 reply; 6+ messages in thread
From: Arjan van de Ven @ 2009-09-19 14:55 UTC (permalink / raw)
  To: Daniel J Blueman; +Cc: Linux Kernel

On Sat, 19 Sep 2009 15:47:24 +0100
Daniel J Blueman <daniel.blueman@gmail.com> wrote:

> On tickless kernels, is the general consensus that for non-embedded
> systems, selecting HZ=1000 gives slightly more throughput in
> particular situations than HZ=100 or 250, due to finer timer
> intervals/granularity?

it's not about throughput. It's about latency for some things....
although now that select/poll and co use hrtimers it's not as critical
anymore.

the HZ timers aren't used much for anything time-critical nowadays.

-- 
Arjan van de Ven 	Intel Open Source Technology Centre
For development, discussion and tips for power savings, 
visit http://www.lesswatts.org

^ permalink raw reply	[flat|nested] 6+ messages in thread

* Re: tickless and HZ=1000 throughput advantage?
  2009-09-19 14:55 ` Arjan van de Ven
@ 2009-09-19 17:50   ` Daniel J Blueman
  2009-09-19 23:12     ` Ben Nizette
  0 siblings, 1 reply; 6+ messages in thread
From: Daniel J Blueman @ 2009-09-19 17:50 UTC (permalink / raw)
  To: Arjan van de Ven; +Cc: Linux Kernel

On Sat, Sep 19, 2009 at 3:55 PM, Arjan van de Ven <arjan@infradead.org> wrote:
> On Sat, 19 Sep 2009 15:47:24 +0100
> Daniel J Blueman <daniel.blueman@gmail.com> wrote:
>
>> On tickless kernels, is the general consensus that for non-embedded
>> systems, selecting HZ=1000 gives slightly more throughput in
>> particular situations than HZ=100 or 250, due to finer timer
>> intervals/granularity?
>
> it's not about throughput. It's about latency for some things....
> although now that select/poll and co use hrtimers it's not as critical
> anymore.
>
> the HZ timers aren't used much for anything time-critical nowadays.

Agreed. Do you think there is still a small case for moving to HZ=1000
(given it's effectively free) in situations like:

jiffies_to_transmit = port->baud?(1 + charsleft * 10 * HZ / port->baud):0;

<applying plausible figures>
(gdb) p (1 + 10 * 10 * 1000 / 38400) * 1
$3 = 3
(gdb) p (1 + 10 * 10 * 250 / 38400) * 4
$5 = 4

-> HZ=250 causes a 33% longer sleep than expected

perhaps?
-- 
Daniel J Blueman

^ permalink raw reply	[flat|nested] 6+ messages in thread

* Re: tickless and HZ=1000 throughput advantage?
  2009-09-19 17:50   ` Daniel J Blueman
@ 2009-09-19 23:12     ` Ben Nizette
  2009-09-20  7:34       ` Tim Blechmann
  0 siblings, 1 reply; 6+ messages in thread
From: Ben Nizette @ 2009-09-19 23:12 UTC (permalink / raw)
  To: Daniel J Blueman; +Cc: Arjan van de Ven, Linux Kernel

On Sat, 2009-09-19 at 18:50 +0100, Daniel J Blueman wrote:

> Agreed. Do you think there is still a small case for moving to HZ=1000
> (given it's effectively free) in situations like:

Sure HZ=1000 gives you more accurate sleeps, that's kind of the point,
but since when has it been "effectively free"?
http://lwn.net/Articles/331607/

	--Ben.


^ permalink raw reply	[flat|nested] 6+ messages in thread

* Re: tickless and HZ=1000 throughput advantage?
  2009-09-19 23:12     ` Ben Nizette
@ 2009-09-20  7:34       ` Tim Blechmann
  2009-09-20  7:40         ` Arjan van de Ven
  0 siblings, 1 reply; 6+ messages in thread
From: Tim Blechmann @ 2009-09-20  7:34 UTC (permalink / raw)
  To: linux-kernel; +Cc: Daniel J Blueman, Arjan van de Ven, Linux Kernel

[-- Attachment #1: Type: text/plain, Size: 808 bytes --]

On 09/20/2009 01:12 AM, Ben Nizette wrote:
> On Sat, 2009-09-19 at 18:50 +0100, Daniel J Blueman wrote:
> 
>> Agreed. Do you think there is still a small case for moving to HZ=1000
>> (given it's effectively free) in situations like:
> 
> Sure HZ=1000 gives you more accurate sleeps, that's kind of the point,
> but since when has it been "effectively free"?
> http://lwn.net/Articles/331607/

i'd be curious, what effect does it have on userspace applications?
like, does it effect the wakeup latency of userspace (pthread)
mutexes/conditions or posix semaphores?

thnx, tim

-- 
tim@klingt.org
http://tim.klingt.org

Desperation is the raw material of drastic change. Only those who can
leave behind everything they have ever believed in can hope to escape.
  William S. Burroughs


[-- Attachment #2: OpenPGP digital signature --]
[-- Type: application/pgp-signature, Size: 197 bytes --]

^ permalink raw reply	[flat|nested] 6+ messages in thread

* Re: tickless and HZ=1000 throughput advantage?
  2009-09-20  7:34       ` Tim Blechmann
@ 2009-09-20  7:40         ` Arjan van de Ven
  0 siblings, 0 replies; 6+ messages in thread
From: Arjan van de Ven @ 2009-09-20  7:40 UTC (permalink / raw)
  To: Tim Blechmann; +Cc: linux-kernel, Daniel J Blueman

On Sun, 20 Sep 2009 09:34:30 +0200
Tim Blechmann <tim@klingt.org> wrote:

> On 09/20/2009 01:12 AM, Ben Nizette wrote:
> > On Sat, 2009-09-19 at 18:50 +0100, Daniel J Blueman wrote:
> > 
> >> Agreed. Do you think there is still a small case for moving to
> >> HZ=1000 (given it's effectively free) in situations like:
> > 
> > Sure HZ=1000 gives you more accurate sleeps, that's kind of the
> > point, but since when has it been "effectively free"?
> > http://lwn.net/Articles/331607/
> 
> i'd be curious, what effect does it have on userspace applications?
> like, does it effect the wakeup latency of userspace (pthread)
> mutexes/conditions or posix semaphores?

the impact to userspace should be zero nowadays since select/poll/etc
moved to hrtimers, which are HZ-independent.



-- 
Arjan van de Ven 	Intel Open Source Technology Centre
For development, discussion and tips for power savings, 
visit http://www.lesswatts.org

^ permalink raw reply	[flat|nested] 6+ messages in thread

end of thread, other threads:[~2009-09-20  7:40 UTC | newest]

Thread overview: 6+ messages (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
2009-09-19 14:47 tickless and HZ=1000 throughput advantage? Daniel J Blueman
2009-09-19 14:55 ` Arjan van de Ven
2009-09-19 17:50   ` Daniel J Blueman
2009-09-19 23:12     ` Ben Nizette
2009-09-20  7:34       ` Tim Blechmann
2009-09-20  7:40         ` Arjan van de Ven

This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.