* Attempt to start X-Server at Xen 3.5 Dom0 ( 2.6.31) on top of Ubuntu 9.04 Server
@ 2009-09-23 15:45 Boris Derzhavets
2009-09-23 19:27 ` Jeremy Fitzhardinge
0 siblings, 1 reply; 3+ messages in thread
From: Boris Derzhavets @ 2009-09-23 15:45 UTC (permalink / raw)
To: Konrad Rzeszutek Wilk; +Cc: Jeremy Fitzhardinge, Xen-devel
[-- Attachment #1.1: Type: text/plain, Size: 6092 bytes --]
Video card Radeon HD 4560. X-server starts fine under native 2.6.28-11-server
ubuntu kernel.
X-Windows Setup :-
Downsize the system:
vi /etc/default/linux-restricted-modules-common:
DISABLED_MODULES=”ath_hal fc fglrx ltm nv”
Install the X11 bare bone:
# aptitude install x-window-system-core
# aptitude install fluxbox fluxconf #lightwight windows manager
# aptitude install dillo #lightweight browser
# aptitude install xfe #lightweight file manager
# apttitude install synaptic # To install eset & esetroot
Change /etc/X11/xorg.conf:
# dpkg-reconfigure xserver-xorg #guided setup
Edit /etc/X11/xorg.conf (use “gtf 1024 768 60″ to obtain the Modeline values)
X-server starts fine under native Ubuntu Server kernel and fluxbox is completely functional.
Attempt to start at Xen 3.5 Dom0 (with the most recent 2.6.31)
dmesg output :-
. . . . . .
[ 43.572422] xen_set_ioapic_routing: irq 16 gsi 16 vector 16 ioapic 0 pin 16 triggering 1 polarity 1
[ 43.572437] pci 0000:01:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 43.710523] [drm] Initialized drm 1.1.0 20060810
[ 43.758245] pci 0000:01:00.0: setting latency timer to 64
[ 43.758433] [drm] Initialized radeon 1.31.0 20080528 for 0000:01:00.0 on minor 0
[ 43.763134] mtrr: type mismatch for d0000000,10000000 old: write-back new: write-combining
[ 44.035133] mtrr: type mismatch for d0000000,10000000 old: write-back new: write-combining
[ 44.035198] mtrr: type mismatch for d0000000,10000000 old: write-back new: write-combining
[ 44.035263] mtrr: type mismatch for d0000000,10000000 old: write-back new: write-combining
[ 44.061841] [drm] Setting GART location based on new memory map
[ 44.095779] [drm] Loading RV730/RV740 PFP Microcode
[ 44.095805] [drm] Loading RV730/RV740 CP Microcode
[ 44.110868] [drm] Resetting GPU
[ 44.215007] [drm] writeback test failed
[ 79.050085] [drm] Resetting GPU
[ 243.858191] mtrr: type mismatch for d0000000,10000000 old: write-back new: write-combining
[ 243.858263] mtrr: type mismatch for d0000000,10000000 old: write-back new: write-combining
[ 244.132051] mtrr: type mismatch for d0000000,10000000 old: write-back new: write-combining
[ 244.132115] mtrr: type mismatch for d0000000,10000000 old: write-back new: write-combining
[ 244.132181] mtrr: type mismatch for d0000000,10000000 old: write-back new: write-combining
[ 244.157265] [drm] Setting GART location based on new memory map
[ 244.190885] [drm] Loading RV730/RV740 PFP Microcode
[ 244.190911] [drm] Loading RV730/RV740 CP Microcode
[ 244.205974] [drm] Resetting GPU
[ 244.310103] [drm] writeback test failed
[ 251.220092] [drm] Resetting GPU
Xorg.0.log :-
(II) AIGLX: Screen 0 is not DRI2 capable
drmOpenDevice: node name is /dev/dri/card0
drmOpenDevice: open result is 11, (OK)
drmOpenByBusid: Searching for BusID pci:0000:01:00.0
drmOpenDevice: node name is /dev/dri/card0
drmOpenDevice: open result is 11, (OK)
drmOpenByBusid: drmOpenMinor returns 11
drmOpenByBusid: drmGetBusid reports pci:0000:01:00.0
(EE) AIGLX error: Calling driver entry point failed(EE) AIGLX: reverting to software rendering
(II) AIGLX: Loaded and initialized /usr/lib/dri/swrast_dri.so
(II) GLX: Initialized DRISWRAST GL provider for screen 0
(II) RADEON(0): Setting screen physical size to 338 x 270
(II) config/hal: Adding input device AT Translated Set 2 keyboard
(II) LoadModule: "evdev"
(II) Loading /usr/lib/xorg/modules/input//evdev_drv.so
(II) Module evdev: vendor="X.Org Foundation"
compiled for 1.6.0, module version = 2.1.1
Module class: X.Org XInput Driver
ABI class: X.Org XInput driver, version 4.0
(**) AT Translated Set 2 keyboard: always reports core events
(**) AT Translated Set 2 keyboard: Device: "/dev/input/event3"
(II) AT Translated Set 2 keyboard: Found keys
(II) AT Translated Set 2 keyboard: Configuring as keyboard
(II) XINPUT: Adding extended input device "AT Translated Set 2 keyboard" (type: KEYBOARD)
(**) Option "xkb_rules" "evdev"
(**) AT Translated Set 2 keyboard: xkb_rules: "evdev"
(**) Option "xkb_model" "pc105"
(**) AT Translated Set 2 keyboard: xkb_model: "pc105"
(**) Option "xkb_layout" "us"
(**) AT Translated Set 2 keyboard: xkb_layout: "us"
(II) config/hal: Adding input device Macintosh mouse button emulation
(**) Macintosh mouse button emulation: always reports core events
(**) Macintosh mouse button emulation: Device: "/dev/input/event2"
(II) Macintosh mouse button emulation: Found 3 mouse buttons
(II) Macintosh mouse button emulation: Found x and y relative axes
(II) Macintosh mouse button emulation: Configuring as mouse
(**) Macintosh mouse button emulation: YAxisMapping: buttons 4 and 5
(**) Macintosh mouse button emulation: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
(II) XINPUT: Adding extended input device "Macintosh mouse button emulation" (type: MOUSE)
(**) Macintosh mouse button emulation: (accel) keeping acceleration scheme 1
(**) Macintosh mouse button emulation: (accel) filter chain progression: 2.00
(**) Macintosh mouse button emulation: (accel) filter stage 0: 20.00 ms
(**) Macintosh mouse button emulation: (accel) set acceleration profile 0
(II) config/hal: Adding input device HID 062a:0001
(**) HID 062a:0001: always reports core events
(**) HID 062a:0001: Device: "/dev/input/event4"
(II) HID 062a:0001: Found 5 mouse buttons
(II) HID 062a:0001: Found x and y relative axes
(II) HID 062a:0001: Configuring as mouse
(**) HID 062a:0001: YAxisMapping: buttons 4 and 5
(**) HID 062a:0001: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
(II) XINPUT: Adding extended input device "HID 062a:0001" (type: MOUSE)
(**) HID 062a:0001: (accel) keeping acceleration scheme 1
(**) HID 062a:0001: (accel) filter chain progression: 2.00
(**) HID 062a:0001: (accel) filter stage 0: 20.00 ms
(**) HID 062a:0001: (accel) set acceleration profile 0
Boris.
[-- Attachment #1.2: Type: text/html, Size: 6667 bytes --]
[-- Attachment #2: dmesg.log.gz --]
[-- Type: application/gzip, Size: 13672 bytes --]
[-- Attachment #3: Xorg.0.log.gz --]
[-- Type: application/gzip, Size: 8681 bytes --]
[-- Attachment #4: Type: text/plain, Size: 138 bytes --]
_______________________________________________
Xen-devel mailing list
Xen-devel@lists.xensource.com
http://lists.xensource.com/xen-devel
^ permalink raw reply [flat|nested] 3+ messages in thread
* Re: Attempt to start X-Server at Xen 3.5 Dom0 ( 2.6.31) on top of Ubuntu 9.04 Server
2009-09-23 15:45 Attempt to start X-Server at Xen 3.5 Dom0 ( 2.6.31) on top of Ubuntu 9.04 Server Boris Derzhavets
@ 2009-09-23 19:27 ` Jeremy Fitzhardinge
2009-09-23 20:25 ` Boris Derzhavets
0 siblings, 1 reply; 3+ messages in thread
From: Jeremy Fitzhardinge @ 2009-09-23 19:27 UTC (permalink / raw)
To: Boris Derzhavets; +Cc: Xen-devel, Konrad Rzeszutek Wilk
On 09/23/09 08:45, Boris Derzhavets wrote:
> Video card Radeon HD 4560. X-server starts fine under native
> 2.6.28-11-server
> ubuntu kernel.
>
I assume you're saying that it fails with 2.6.31-pvops dom0? How does
it fail? Is it completely non-functional? Does the whole system
crash? Or does X simply fail to start? Or it does start but is
crippled in some way?
Does it work with 2.6.31 running without Xen? How do the log files compare?
Thanks,
J
>
> X-Windows Setup :-
>
> Downsize the system:
> vi /etc/default/linux-restricted-modules-common:
> DISABLED_MODULES=”ath_hal fc fglrx ltm nv” Install the X11 bare bone:
>
> # aptitude install x-window-system-core
> # aptitude install fluxbox fluxconf #lightwight windows manager
> # aptitude install dillo #lightweight browser
> # aptitude install xfe #lightweight file manager
> # apttitude install synaptic # To install eset & esetroot
> Change /etc/X11/xorg.conf:
> # dpkg-reconfigure xserver-xorg #guided setup
> Edit /etc/X11/xorg.conf (use “gtf 1024 768 60″ to obtain the Modeline
> values)
> X-server starts fine under native Ubuntu Server kernel and fluxbox
> is completely functional.
>
> Attempt to start at Xen 3.5 Dom0 (with the most recent 2.6.31)
>
> dmesg output :-
> . . . . . .
>
> [ 43.572422] xen_set_ioapic_routing: irq 16 gsi 16 vector 16 ioapic
> 0 pin 16 triggering 1 polarity 1
> [ 43.572437] pci 0000:01:00.0: PCI INT A -> GSI 16 (level, low) ->
> IRQ 16
> [ 43.710523] [drm] Initialized drm 1.1.0 20060810
> [ 43.758245] pci 0000:01:00.0: setting latency timer to 64
> [ 43.758433] [drm] Initialized radeon 1.31.0 20080528 for
> 0000:01:00.0 on minor 0
> [ 43.763134] mtrr: type mismatch for d0000000,10000000 old:
> write-back new: write-combining
> [ 44.035133] mtrr: type mismatch for d0000000,10000000 old:
> write-back new: write-combining
> [ 44.035198] mtrr: type mismatch for d0000000,10000000 old:
> write-back new: write-combining
> [ 44.035263] mtrr: type mismatch for d0000000,10000000 old:
> write-back new: write-combining
> [ 44.061841] [drm] Setting GART location based on new memory map
> [ 44.095779] [drm] Loading RV730/RV740 PFP Microcode
> [ 44.095805] [drm] Loading RV730/RV740 CP Microcode
> [ 44.110868] [drm] Resetting GPU
> [ 44.215007] [drm] writeback test failed
> [ 79.050085] [drm] Resetting GPU
> [ 243.858191] mtrr: type mismatch for d0000000,10000000 old:
> write-back new: write-combining
> [ 243.858263] mtrr: type mismatch for d0000000,10000000 old:
> write-back new: write-combining
> [ 244.132051] mtrr: type mismatch for d0000000,10000000 old:
> write-back new: write-combining
> [ 244.132115] mtrr: type mismatch for d0000000,10000000 old:
> write-back new: write-combining
> [ 244.132181] mtrr: type mismatch for d0000000,10000000 old:
> write-back new: write-combining
> [ 244.157265] [drm] Setting GART location based on new memory map
> [ 244.190885] [drm] Loading RV730/RV740 PFP Microcode
> [ 244.190911] [drm] Loading RV730/RV740 CP Microcode
> [ 244.205974] [drm] Resetting GPU
> [ 244.310103] [drm] writeback test failed
> [ 251.220092] [drm] Resetting GPU
>
> Xorg.0.log :-
>
> (II) AIGLX: Screen 0 is not DRI2 capable
> drmOpenDevice: node name is /dev/dri/card0
> drmOpenDevice: open result is 11, (OK)
> drmOpenByBusid: Searching for BusID pci:0000:01:00.0
> drmOpenDevice: node name is /dev/dri/card0
> drmOpenDevice: open result is 11, (OK)
> drmOpenByBusid: drmOpenMinor returns 11
> drmOpenByBusid: drmGetBusid reports pci:0000:01:00.0
> (EE) AIGLX error: Calling driver entry point failed(EE) AIGLX:
> reverting to software rendering
> (II) AIGLX: Loaded and initialized /usr/lib/dri/swrast_dri.so
> (II) GLX: Initialized DRISWRAST GL provider for screen 0
> (II) RADEON(0): Setting screen physical size to 338 x 270
> (II) config/hal: Adding input device AT Translated Set 2 keyboard
> (II) LoadModule: "evdev"
> (II) Loading /usr/lib/xorg/modules/input//evdev_drv.so
> (II) Module evdev: vendor="X.Org Foundation"
> compiled for 1.6.0, module version = 2.1.1
> Module class: X.Org XInput Driver
> ABI class: X.Org XInput driver, version 4.0
> (**) AT Translated Set 2 keyboard: always reports core events
> (**) AT Translated Set 2 keyboard: Device: "/dev/input/event3"
> (II) AT Translated Set 2 keyboard: Found keys
> (II) AT Translated Set 2 keyboard: Configuring as keyboard
> (II) XINPUT: Adding extended input device "AT Translated Set 2
> keyboard" (type: KEYBOARD)
> (**) Option "xkb_rules" "evdev"
> (**) AT Translated Set 2 keyboard: xkb_rules: "evdev"
> (**) Option "xkb_model" "pc105"
> (**) AT Translated Set 2 keyboard: xkb_model: "pc105"
> (**) Option "xkb_layout" "us"
> (**) AT Translated Set 2 keyboard: xkb_layout: "us"
> (II) config/hal: Adding input device Macintosh mouse button emulation
> (**) Macintosh mouse button emulation: always reports core events
> (**) Macintosh mouse button emulation: Device: "/dev/input/event2"
> (II) Macintosh mouse button emulation: Found 3 mouse buttons
> (II) Macintosh mouse button emulation: Found x and y relative axes
> (II) Macintosh mouse button emulation: Configuring as mouse
> (**) Macintosh mouse button emulation: YAxisMapping: buttons 4 and 5
> (**) Macintosh mouse button emulation: EmulateWheelButton: 4,
> EmulateWheelInertia: 10, EmulateWheelTimeout: 200
> (II) XINPUT: Adding extended input device "Macintosh mouse button
> emulation" (type: MOUSE)
> (**) Macintosh mouse button emulation: (accel) keeping acceleration
> scheme 1
> (**) Macintosh mouse button emulation: (accel) filter chain
> progression: 2.00
> (**) Macintosh mouse button emulation: (accel) filter stage 0: 20.00 ms
> (**) Macintosh mouse button emulation: (accel) set acceleration profile 0
> (II) config/hal: Adding input device HID 062a:0001
> (**) HID 062a:0001: always reports core events
> (**) HID 062a:0001: Device: "/dev/input/event4"
> (II) HID 062a:0001: Found 5 mouse buttons
> (II) HID 062a:0001: Found x and y relative axes
> (II) HID 062a:0001: Configuring as mouse
> (**) HID 062a:0001: YAxisMapping: buttons 4 and 5
> (**) HID 062a:0001: EmulateWheelButton: 4, EmulateWheelInertia: 10,
> EmulateWheelTimeout: 200
> (II) XINPUT: Adding extended input device "HID 062a:0001" (type: MOUSE)
> (**) HID 062a:0001: (accel) keeping acceleration scheme 1
> (**) HID 062a:0001: (accel) filter chain progression: 2.00
> (**) HID 062a:0001: (accel) filter stage 0: 20.00 ms
> (**) HID 062a:0001: (accel) set acceleration profile 0
>
> Boris.
>
>
^ permalink raw reply [flat|nested] 3+ messages in thread
* Re: Re: Attempt to start X-Server at Xen 3.5 Dom0 ( 2.6.31) on top of Ubuntu 9.04 Server
2009-09-23 19:27 ` Jeremy Fitzhardinge
@ 2009-09-23 20:25 ` Boris Derzhavets
0 siblings, 0 replies; 3+ messages in thread
From: Boris Derzhavets @ 2009-09-23 20:25 UTC (permalink / raw)
To: Jeremy Fitzhardinge; +Cc: Xen-devel, Konrad Rzeszutek Wilk
[-- Attachment #1.1: Type: text/plain, Size: 7993 bytes --]
>I assume you're saying that it fails with 2.6.31-pvops dom0?
Yes.
>How does it fail? Is it completely non-functional?
Yes, it is completely non-functional.
>Does the whole system crash?
No, just in text mode.
> Or does X simply fail to start?
No. It seems to be running.
>Or it does start but is crippled in some way?
It starts due to logs content during system boot up ,
like on F11, where everything is going fine.
I attached both dmesg.log and Xorg.0.log to previous message for Ubuntu 9.04 Server.
> Does it work with 2.6.31 running without Xen? How do the log files compare?
I will check it tomorrow.
Boris.
--- On Wed, 9/23/09, Jeremy Fitzhardinge <jeremy@goop.org> wrote:
From: Jeremy Fitzhardinge <jeremy@goop.org>
Subject: [Xen-devel] Re: Attempt to start X-Server at Xen 3.5 Dom0 ( 2.6.31) on top of Ubuntu 9.04 Server
To: "Boris Derzhavets" <bderzhavets@yahoo.com>
Cc: "Xen-devel" <xen-devel@lists.xensource.com>, "Konrad Rzeszutek Wilk" <konrad.wilk@oracle.com>
Date: Wednesday, September 23, 2009, 3:27 PM
On 09/23/09 08:45, Boris Derzhavets wrote:
> Video card Radeon HD 4560. X-server starts fine under native
> 2.6.28-11-server
> ubuntu kernel.
>
I assume you're saying that it fails with 2.6.31-pvops dom0? How does
it fail? Is it completely non-functional? Does the whole system
crash? Or does X simply fail to start? Or it does start but is
crippled in some way?
Does it work with 2.6.31 running without Xen? How do the log files compare?
Thanks,
J
>
> X-Windows Setup :-
>
> Downsize the system:
> vi /etc/default/linux-restricted-modules-common:
> DISABLED_MODULES=”ath_hal fc fglrx ltm nv” Install the X11 bare bone:
>
> # aptitude install x-window-system-core
> # aptitude install fluxbox fluxconf #lightwight windows manager
> # aptitude install dillo #lightweight browser
> # aptitude install xfe #lightweight file manager
> # apttitude install synaptic # To install eset & esetroot
> Change /etc/X11/xorg.conf:
> # dpkg-reconfigure xserver-xorg #guided setup
> Edit /etc/X11/xorg.conf (use “gtf 1024 768 60″ to obtain the Modeline
> values)
> X-server starts fine under native Ubuntu Server kernel and fluxbox
> is completely functional.
>
> Attempt to start at Xen 3.5 Dom0 (with the most recent 2.6.31)
>
> dmesg output :-
> . . . . . .
>
> [ 43.572422] xen_set_ioapic_routing: irq 16 gsi 16 vector 16 ioapic
> 0 pin 16 triggering 1 polarity 1
> [ 43.572437] pci 0000:01:00.0: PCI INT A -> GSI 16 (level, low) ->
> IRQ 16
> [ 43.710523] [drm] Initialized drm 1.1.0 20060810
> [ 43.758245] pci 0000:01:00.0: setting latency timer to 64
> [ 43.758433] [drm] Initialized radeon 1.31.0 20080528 for
> 0000:01:00.0 on minor 0
> [ 43.763134] mtrr: type mismatch for d0000000,10000000 old:
> write-back new: write-combining
> [ 44.035133] mtrr: type mismatch for d0000000,10000000 old:
> write-back new: write-combining
> [ 44.035198] mtrr: type mismatch for d0000000,10000000 old:
> write-back new: write-combining
> [ 44.035263] mtrr: type mismatch for d0000000,10000000 old:
> write-back new: write-combining
> [ 44.061841] [drm] Setting GART location based on new memory map
> [ 44.095779] [drm] Loading RV730/RV740 PFP Microcode
> [ 44.095805] [drm] Loading RV730/RV740 CP Microcode
> [ 44.110868] [drm] Resetting GPU
> [ 44.215007] [drm] writeback test failed
> [ 79.050085] [drm] Resetting GPU
> [ 243.858191] mtrr: type mismatch for d0000000,10000000 old:
> write-back new: write-combining
> [ 243.858263] mtrr: type mismatch for d0000000,10000000 old:
> write-back new: write-combining
> [ 244.132051] mtrr: type mismatch for d0000000,10000000 old:
> write-back new: write-combining
> [ 244.132115] mtrr: type mismatch for d0000000,10000000 old:
> write-back new: write-combining
> [ 244.132181] mtrr: type mismatch for d0000000,10000000 old:
> write-back new: write-combining
> [ 244.157265] [drm] Setting GART location based on new memory map
> [ 244.190885] [drm] Loading RV730/RV740 PFP Microcode
> [ 244.190911] [drm] Loading RV730/RV740 CP Microcode
> [ 244.205974] [drm] Resetting GPU
> [ 244.310103] [drm] writeback test failed
> [ 251.220092] [drm] Resetting GPU
>
> Xorg.0.log :-
>
> (II) AIGLX: Screen 0 is not DRI2 capable
> drmOpenDevice: node name is /dev/dri/card0
> drmOpenDevice: open result is 11, (OK)
> drmOpenByBusid: Searching for BusID pci:0000:01:00.0
> drmOpenDevice: node name is /dev/dri/card0
> drmOpenDevice: open result is 11, (OK)
> drmOpenByBusid: drmOpenMinor returns 11
> drmOpenByBusid: drmGetBusid reports pci:0000:01:00.0
> (EE) AIGLX error: Calling driver entry point failed(EE) AIGLX:
> reverting to software rendering
> (II) AIGLX: Loaded and initialized /usr/lib/dri/swrast_dri.so
> (II) GLX: Initialized DRISWRAST GL provider for screen 0
> (II) RADEON(0): Setting screen physical size to 338 x 270
> (II) config/hal: Adding input device AT Translated Set 2 keyboard
> (II) LoadModule: "evdev"
> (II) Loading /usr/lib/xorg/modules/input//evdev_drv.so
> (II) Module evdev: vendor="X.Org Foundation"
> compiled for 1.6.0, module version = 2.1.1
> Module class: X.Org XInput Driver
> ABI class: X.Org XInput driver, version 4.0
> (**) AT Translated Set 2 keyboard: always reports core events
> (**) AT Translated Set 2 keyboard: Device: "/dev/input/event3"
> (II) AT Translated Set 2 keyboard: Found keys
> (II) AT Translated Set 2 keyboard: Configuring as keyboard
> (II) XINPUT: Adding extended input device "AT Translated Set 2
> keyboard" (type: KEYBOARD)
> (**) Option "xkb_rules" "evdev"
> (**) AT Translated Set 2 keyboard: xkb_rules: "evdev"
> (**) Option "xkb_model" "pc105"
> (**) AT Translated Set 2 keyboard: xkb_model: "pc105"
> (**) Option "xkb_layout" "us"
> (**) AT Translated Set 2 keyboard: xkb_layout: "us"
> (II) config/hal: Adding input device Macintosh mouse button emulation
> (**) Macintosh mouse button emulation: always reports core events
> (**) Macintosh mouse button emulation: Device: "/dev/input/event2"
> (II) Macintosh mouse button emulation: Found 3 mouse buttons
> (II) Macintosh mouse button emulation: Found x and y relative axes
> (II) Macintosh mouse button emulation: Configuring as mouse
> (**) Macintosh mouse button emulation: YAxisMapping: buttons 4 and 5
> (**) Macintosh mouse button emulation: EmulateWheelButton: 4,
> EmulateWheelInertia: 10, EmulateWheelTimeout: 200
> (II) XINPUT: Adding extended input device "Macintosh mouse button
> emulation" (type: MOUSE)
> (**) Macintosh mouse button emulation: (accel) keeping acceleration
> scheme 1
> (**) Macintosh mouse button emulation: (accel) filter chain
> progression: 2.00
> (**) Macintosh mouse button emulation: (accel) filter stage 0: 20.00 ms
> (**) Macintosh mouse button emulation: (accel) set acceleration profile 0
> (II) config/hal: Adding input device HID 062a:0001
> (**) HID 062a:0001: always reports core events
> (**) HID 062a:0001: Device: "/dev/input/event4"
> (II) HID 062a:0001: Found 5 mouse buttons
> (II) HID 062a:0001: Found x and y relative axes
> (II) HID 062a:0001: Configuring as mouse
> (**) HID 062a:0001: YAxisMapping: buttons 4 and 5
> (**) HID 062a:0001: EmulateWheelButton: 4, EmulateWheelInertia: 10,
> EmulateWheelTimeout: 200
> (II) XINPUT: Adding extended input device "HID 062a:0001" (type: MOUSE)
> (**) HID 062a:0001: (accel) keeping acceleration scheme 1
> (**) HID 062a:0001: (accel) filter chain progression: 2.00
> (**) HID 062a:0001: (accel) filter stage 0: 20.00 ms
> (**) HID 062a:0001: (accel) set acceleration profile 0
>
> Boris.
>
>
_______________________________________________
Xen-devel mailing list
Xen-devel@lists.xensource.com
http://lists.xensource.com/xen-devel
[-- Attachment #1.2: Type: text/html, Size: 9649 bytes --]
[-- Attachment #2: Type: text/plain, Size: 138 bytes --]
_______________________________________________
Xen-devel mailing list
Xen-devel@lists.xensource.com
http://lists.xensource.com/xen-devel
^ permalink raw reply [flat|nested] 3+ messages in thread
end of thread, other threads:[~2009-09-23 20:25 UTC | newest]
Thread overview: 3+ messages (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
2009-09-23 15:45 Attempt to start X-Server at Xen 3.5 Dom0 ( 2.6.31) on top of Ubuntu 9.04 Server Boris Derzhavets
2009-09-23 19:27 ` Jeremy Fitzhardinge
2009-09-23 20:25 ` Boris Derzhavets
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.