* [lm-sensors] [PATCH 2.6.32] hwmon: Disable s3c-hwmon build for
@ 2009-10-07 13:39 Mark Brown
0 siblings, 0 replies; 9+ messages in thread
From: Mark Brown @ 2009-10-07 13:39 UTC (permalink / raw)
To: linux-arm-kernel
The s3c-hwmon driver depends on the arch/arm implementation of the core
ADC support for the chip. Since the S3C64xx version has not yet been
merged disable building of the driver on S3C64xx for now.
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
---
drivers/hwmon/Kconfig | 2 +-
1 files changed, 1 insertions(+), 1 deletions(-)
diff --git a/drivers/hwmon/Kconfig b/drivers/hwmon/Kconfig
index 4d0d0cd..87184b5 100644
--- a/drivers/hwmon/Kconfig
+++ b/drivers/hwmon/Kconfig
@@ -684,7 +684,7 @@ config SENSORS_SHT15
config SENSORS_S3C
tristate "S3C24XX/S3C64XX Inbuilt ADC"
- depends on ARCH_S3C2410 || ARCH_S3C64XX
+ depends on ARCH_S3C2410
help
If you say yes here you get support for the on-board ADCs of
the Samsung S3C24XX or S3C64XX series of SoC
--
1.6.4.3
_______________________________________________
lm-sensors mailing list
lm-sensors@lm-sensors.org
http://lists.lm-sensors.org/mailman/listinfo/lm-sensors
^ permalink raw reply related [flat|nested] 9+ messages in thread
* Re: [lm-sensors] [PATCH 2.6.32] hwmon: Disable s3c-hwmon build for
[not found] <mailman.3211.1254922769.2256.linux-arm-kernel@lists.infradead.org>
@ 2009-10-07 14:22 ` Maurus Cuelenaere
0 siblings, 0 replies; 9+ messages in thread
From: Maurus Cuelenaere @ 2009-10-07 14:22 UTC (permalink / raw)
To: linux-arm-kernel
Op 07-10-09 15:39, linux-arm-kernel-request@lists.infradead.org schreef:
> The s3c-hwmon driver depends on the arch/arm implementation of the core
> ADC support for the chip. Since the S3C64xx version has not yet been
> merged disable building of the driver on S3C64xx for now.
>
> Signed-off-by: Mark Brown<broonie@opensource.wolfsonmicro.com>
> ---
> drivers/hwmon/Kconfig | 2 +-
> 1 files changed, 1 insertions(+), 1 deletions(-)
>
> diff --git a/drivers/hwmon/Kconfig b/drivers/hwmon/Kconfig
> index 4d0d0cd..87184b5 100644
> --- a/drivers/hwmon/Kconfig
> +++ b/drivers/hwmon/Kconfig
> @@ -684,7 +684,7 @@ config SENSORS_SHT15
>
> config SENSORS_S3C
> tristate "S3C24XX/S3C64XX Inbuilt ADC"
> - depends on ARCH_S3C2410 || ARCH_S3C64XX
> + depends on ARCH_S3C2410
> help
> If you say yes here you get support for the on-board ADCs of
> the Samsung S3C24XX or S3C64XX series of SoC
> -- 1.6.4.3
Have you seen this?
http://lists.infradead.org/pipermail/linux-arm-kernel/2009-October/001787.html
Regards,
Maurus Cuelenaere
_______________________________________________
lm-sensors mailing list
lm-sensors@lm-sensors.org
http://lists.lm-sensors.org/mailman/listinfo/lm-sensors
^ permalink raw reply [flat|nested] 9+ messages in thread
* [PATCH 2.6.32] hwmon: Disable s3c-hwmon build for S3C64xx
@ 2009-10-07 14:22 ` Maurus Cuelenaere
0 siblings, 0 replies; 9+ messages in thread
From: Maurus Cuelenaere @ 2009-10-07 14:22 UTC (permalink / raw)
To: linux-arm-kernel
Op 07-10-09 15:39, linux-arm-kernel-request at lists.infradead.org schreef:
> The s3c-hwmon driver depends on the arch/arm implementation of the core
> ADC support for the chip. Since the S3C64xx version has not yet been
> merged disable building of the driver on S3C64xx for now.
>
> Signed-off-by: Mark Brown<broonie@opensource.wolfsonmicro.com>
> ---
> drivers/hwmon/Kconfig | 2 +-
> 1 files changed, 1 insertions(+), 1 deletions(-)
>
> diff --git a/drivers/hwmon/Kconfig b/drivers/hwmon/Kconfig
> index 4d0d0cd..87184b5 100644
> --- a/drivers/hwmon/Kconfig
> +++ b/drivers/hwmon/Kconfig
> @@ -684,7 +684,7 @@ config SENSORS_SHT15
>
> config SENSORS_S3C
> tristate "S3C24XX/S3C64XX Inbuilt ADC"
> - depends on ARCH_S3C2410 || ARCH_S3C64XX
> + depends on ARCH_S3C2410
> help
> If you say yes here you get support for the on-board ADCs of
> the Samsung S3C24XX or S3C64XX series of SoC
> -- 1.6.4.3
Have you seen this?
http://lists.infradead.org/pipermail/linux-arm-kernel/2009-October/001787.html
Regards,
Maurus Cuelenaere
^ permalink raw reply [flat|nested] 9+ messages in thread
* Re: [lm-sensors] [PATCH 2.6.32] hwmon: Disable s3c-hwmon build
2009-10-07 14:22 ` [PATCH 2.6.32] hwmon: Disable s3c-hwmon build for S3C64xx Maurus Cuelenaere
@ 2009-10-07 14:30 ` Mark Brown
-1 siblings, 0 replies; 9+ messages in thread
From: Mark Brown @ 2009-10-07 14:30 UTC (permalink / raw)
To: linux-arm-kernel
On Wed, Oct 07, 2009 at 04:22:34PM +0200, Maurus Cuelenaere wrote:
> Have you seen this?
> http://lists.infradead.org/pipermail/linux-arm-kernel/2009-October/001787.html
Yes, but it doesn't look like 2.6.32 material at this point (and the fix
patch was originally posted in August).
_______________________________________________
lm-sensors mailing list
lm-sensors@lm-sensors.org
http://lists.lm-sensors.org/mailman/listinfo/lm-sensors
^ permalink raw reply [flat|nested] 9+ messages in thread
* [lm-sensors] [PATCH 2.6.32] hwmon: Disable s3c-hwmon build for S3C64xx
@ 2009-10-07 14:30 ` Mark Brown
0 siblings, 0 replies; 9+ messages in thread
From: Mark Brown @ 2009-10-07 14:30 UTC (permalink / raw)
To: linux-arm-kernel
On Wed, Oct 07, 2009 at 04:22:34PM +0200, Maurus Cuelenaere wrote:
> Have you seen this?
> http://lists.infradead.org/pipermail/linux-arm-kernel/2009-October/001787.html
Yes, but it doesn't look like 2.6.32 material at this point (and the fix
patch was originally posted in August).
^ permalink raw reply [flat|nested] 9+ messages in thread
* Re: [lm-sensors] [PATCH 2.6.32] hwmon: Disable s3c-hwmon build for
2009-10-07 14:30 ` [lm-sensors] [PATCH 2.6.32] hwmon: Disable s3c-hwmon build for S3C64xx Mark Brown
@ 2009-10-07 14:55 ` Jean Delvare
-1 siblings, 0 replies; 9+ messages in thread
From: Jean Delvare @ 2009-10-07 14:55 UTC (permalink / raw)
To: linux-arm-kernel
Hi Mark,
On Wed, 7 Oct 2009 15:30:07 +0100, Mark Brown wrote:
> On Wed, Oct 07, 2009 at 04:22:34PM +0200, Maurus Cuelenaere wrote:
>
> > Have you seen this?
>
> > http://lists.infradead.org/pipermail/linux-arm-kernel/2009-October/001787.html
>
> Yes, but it doesn't look like 2.6.32 material at this point (and the fix
> patch was originally posted in August).
I thought it'd be merged into the patch adding the driver, that's why I
didn't pick it back then. But it did not happen, so I've applied your
patch now and will send it to Linus soon.
--
Jean Delvare
_______________________________________________
lm-sensors mailing list
lm-sensors@lm-sensors.org
http://lists.lm-sensors.org/mailman/listinfo/lm-sensors
^ permalink raw reply [flat|nested] 9+ messages in thread
* [lm-sensors] [PATCH 2.6.32] hwmon: Disable s3c-hwmon build for S3C64xx
@ 2009-10-07 14:55 ` Jean Delvare
0 siblings, 0 replies; 9+ messages in thread
From: Jean Delvare @ 2009-10-07 14:55 UTC (permalink / raw)
To: linux-arm-kernel
Hi Mark,
On Wed, 7 Oct 2009 15:30:07 +0100, Mark Brown wrote:
> On Wed, Oct 07, 2009 at 04:22:34PM +0200, Maurus Cuelenaere wrote:
>
> > Have you seen this?
>
> > http://lists.infradead.org/pipermail/linux-arm-kernel/2009-October/001787.html
>
> Yes, but it doesn't look like 2.6.32 material at this point (and the fix
> patch was originally posted in August).
I thought it'd be merged into the patch adding the driver, that's why I
didn't pick it back then. But it did not happen, so I've applied your
patch now and will send it to Linus soon.
--
Jean Delvare
^ permalink raw reply [flat|nested] 9+ messages in thread
* Re: [lm-sensors] [PATCH 2.6.32] hwmon: Disable s3c-hwmon build
2009-10-07 14:55 ` [lm-sensors] [PATCH 2.6.32] hwmon: Disable s3c-hwmon build for S3C64xx Jean Delvare
@ 2009-10-07 15:02 ` Mark Brown
-1 siblings, 0 replies; 9+ messages in thread
From: Mark Brown @ 2009-10-07 15:02 UTC (permalink / raw)
To: linux-arm-kernel
On Wed, Oct 07, 2009 at 04:55:37PM +0200, Jean Delvare wrote:
> I thought it'd be merged into the patch adding the driver, that's why I
> didn't pick it back then. But it did not happen, so I've applied your
> patch now and will send it to Linus soon.
Thanks. The driver patch had already been applied at the time I posted
(I noticed the issue through running -next rather than code review).
_______________________________________________
lm-sensors mailing list
lm-sensors@lm-sensors.org
http://lists.lm-sensors.org/mailman/listinfo/lm-sensors
^ permalink raw reply [flat|nested] 9+ messages in thread
* [lm-sensors] [PATCH 2.6.32] hwmon: Disable s3c-hwmon build for S3C64xx
@ 2009-10-07 15:02 ` Mark Brown
0 siblings, 0 replies; 9+ messages in thread
From: Mark Brown @ 2009-10-07 15:02 UTC (permalink / raw)
To: linux-arm-kernel
On Wed, Oct 07, 2009 at 04:55:37PM +0200, Jean Delvare wrote:
> I thought it'd be merged into the patch adding the driver, that's why I
> didn't pick it back then. But it did not happen, so I've applied your
> patch now and will send it to Linus soon.
Thanks. The driver patch had already been applied at the time I posted
(I noticed the issue through running -next rather than code review).
^ permalink raw reply [flat|nested] 9+ messages in thread
end of thread, other threads:[~2009-10-07 15:02 UTC | newest]
Thread overview: 9+ messages (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
[not found] <mailman.3211.1254922769.2256.linux-arm-kernel@lists.infradead.org>
2009-10-07 14:22 ` [lm-sensors] [PATCH 2.6.32] hwmon: Disable s3c-hwmon build for Maurus Cuelenaere
2009-10-07 14:22 ` [PATCH 2.6.32] hwmon: Disable s3c-hwmon build for S3C64xx Maurus Cuelenaere
2009-10-07 14:30 ` [lm-sensors] [PATCH 2.6.32] hwmon: Disable s3c-hwmon build Mark Brown
2009-10-07 14:30 ` [lm-sensors] [PATCH 2.6.32] hwmon: Disable s3c-hwmon build for S3C64xx Mark Brown
2009-10-07 14:55 ` [lm-sensors] [PATCH 2.6.32] hwmon: Disable s3c-hwmon build for Jean Delvare
2009-10-07 14:55 ` [lm-sensors] [PATCH 2.6.32] hwmon: Disable s3c-hwmon build for S3C64xx Jean Delvare
2009-10-07 15:02 ` [lm-sensors] [PATCH 2.6.32] hwmon: Disable s3c-hwmon build Mark Brown
2009-10-07 15:02 ` [lm-sensors] [PATCH 2.6.32] hwmon: Disable s3c-hwmon build for S3C64xx Mark Brown
2009-10-07 13:39 [lm-sensors] [PATCH 2.6.32] hwmon: Disable s3c-hwmon build for Mark Brown
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.