* [PATCH] CX23885 card Mygica X8558Pro DMB-TH
@ 2009-10-26 11:54 David T. L. Wong
0 siblings, 0 replies; only message in thread
From: David T. L. Wong @ 2009-10-26 11:54 UTC (permalink / raw)
To: Mauro Carvalho Chehab; +Cc: v4l-dvb
[-- Attachment #1: Type: text/plain, Size: 145 bytes --]
Hi,
This patch add support for cx23885 card Mygica X8558 Pro DMB-TH
Regards,
David
Signed-off-by: David T. L. Wong <davidtlwong@gmail.com>
[-- Attachment #2: cx23885_card_mygica_x8558pro.patch --]
[-- Type: text/x-patch, Size: 5026 bytes --]
changeset: 13168:988f021b2bea
tag: tip
user: David T.L. Wong <davidtlwong@gmail.com>
date: Mon Oct 26 18:20:30 2009 +0800
summary: cx23885: add card Mygica X8558 Pro DMB-TH
diff --git a/linux/drivers/media/video/cx23885/cx23885-cards.c b/linux/drivers/media/video/cx23885/cx23885-cards.c
--- a/linux/drivers/media/video/cx23885/cx23885-cards.c
+++ b/linux/drivers/media/video/cx23885/cx23885-cards.c
@@ -216,6 +216,11 @@
.name = "Compro VideoMate E800",
.portc = CX23885_MPEG_DVB,
},
+ [CX23885_BOARD_MYGICA_X8558PRO] = {
+ .name = "Mygica X8558 PRO DMB-TH",
+ .portb = CX23885_MPEG_DVB,
+ .portc = CX23885_MPEG_DVB,
+ },
};
const unsigned int cx23885_bcount = ARRAY_SIZE(cx23885_boards);
@@ -351,6 +356,10 @@
.subvendor = 0x1858,
.subdevice = 0xe800,
.card = CX23885_BOARD_COMPRO_VIDEOMATE_E800,
+ }, {
+ .subvendor = 0x14f1,
+ .subdevice = 0x8578,
+ .card = CX23885_BOARD_MYGICA_X8558PRO,
},
};
const unsigned int cx23885_idcount = ARRAY_SIZE(cx23885_subids);
@@ -768,6 +777,15 @@
cx_set(GP0_IO, 0x00060006);
mdelay(100);
break;
+ case CX23885_BOARD_MYGICA_X8558PRO:
+ /* GPIO-0 reset first ATBM8830 */
+ /* GPIO-1 reset second ATBM8830 */
+ cx23885_gpio_enable(dev, GPIO_0 | GPIO_1, 1);
+ cx23885_gpio_clear(dev, GPIO_0 | GPIO_1);
+ mdelay(100);
+ cx23885_gpio_set(dev, GPIO_0 | GPIO_1);
+ mdelay(100);
+ break;
case CX23885_BOARD_HAUPPAUGE_HVR1850:
/* GPIO-0 656_CLK */
/* GPIO-1 656_D0 */
@@ -938,6 +956,14 @@
ts1->ts_clk_en_val = 0x1; /* Enable TS_CLK */
ts1->src_sel_val = CX23885_SRC_SEL_PARALLEL_MPEG_VIDEO;
break;
+ case CX23885_BOARD_MYGICA_X8558PRO:
+ ts1->gen_ctrl_val = 0x5; /* Parallel */
+ ts1->ts_clk_en_val = 0x1; /* Enable TS_CLK */
+ ts1->src_sel_val = CX23885_SRC_SEL_PARALLEL_MPEG_VIDEO;
+ ts2->gen_ctrl_val = 0xc; /* Serial bus + punctured clock */
+ ts2->ts_clk_en_val = 0x1; /* Enable TS_CLK */
+ ts2->src_sel_val = CX23885_SRC_SEL_PARALLEL_MPEG_VIDEO;
+ break;
case CX23885_BOARD_HAUPPAUGE_HVR1250:
case CX23885_BOARD_HAUPPAUGE_HVR1500:
case CX23885_BOARD_HAUPPAUGE_HVR1500Q:
diff --git a/linux/drivers/media/video/cx23885/cx23885-dvb.c b/linux/drivers/media/video/cx23885/cx23885-dvb.c
--- a/linux/drivers/media/video/cx23885/cx23885-dvb.c
+++ b/linux/drivers/media/video/cx23885/cx23885-dvb.c
@@ -39,6 +39,7 @@
#include "tda18271.h"
#include "lgdt330x.h"
#include "xc5000.h"
+#include "max2165.h"
#include "tda10048.h"
#include "tuner-xc2028.h"
#include "tuner-simple.h"
@@ -55,6 +56,7 @@
#include "netup-eeprom.h"
#include "netup-init.h"
#include "lgdt3305.h"
+#include "atbm8830.h"
static unsigned int debug;
@@ -536,6 +538,38 @@
.if_khz = 6500,
};
+static struct atbm8830_config mygica_x8558pro_atbm8830_cfg1 = {
+ .prod = ATBM8830_PROD_8830,
+ .demod_address = 0x44,
+ .serial_ts = 0,
+ .ts_sampling_edge = 1,
+ .ts_clk_gated = 0,
+ .osc_clk_freq = 30400, /* in kHz */
+ .if_freq = 0, /* zero IF */
+ .zif_swap_iq = 1,
+};
+
+static struct max2165_config mygic_x8558pro_max2165_cfg1 = {
+ .i2c_address = 0x60,
+ .osc_clk = 20
+};
+
+static struct atbm8830_config mygica_x8558pro_atbm8830_cfg2 = {
+ .prod = ATBM8830_PROD_8830,
+ .demod_address = 0x44,
+ .serial_ts = 1,
+ .ts_sampling_edge = 1,
+ .ts_clk_gated = 0,
+ .osc_clk_freq = 30400, /* in kHz */
+ .if_freq = 0, /* zero IF */
+ .zif_swap_iq = 1,
+};
+
+static struct max2165_config mygic_x8558pro_max2165_cfg2 = {
+ .i2c_address = 0x60,
+ .osc_clk = 20
+};
+
static int dvb_register(struct cx23885_tsport *port)
{
struct cx23885_dev *dev = port->dev;
@@ -900,6 +934,36 @@
0x60, &dev->i2c_bus[0].i2c_adap,
&hauppauge_tda18271_config);
break;
+ case CX23885_BOARD_MYGICA_X8558PRO:
+ switch (port->nr) {
+ /* port B */
+ case 1:
+ i2c_bus = &dev->i2c_bus[0];
+ fe0->dvb.frontend = dvb_attach(atbm8830_attach,
+ &mygica_x8558pro_atbm8830_cfg1,
+ &i2c_bus->i2c_adap);
+ if (fe0->dvb.frontend != NULL) {
+ dvb_attach(max2165_attach,
+ fe0->dvb.frontend,
+ &i2c_bus->i2c_adap,
+ &mygic_x8558pro_max2165_cfg1);
+ }
+ break;
+ /* port C */
+ case 2:
+ i2c_bus = &dev->i2c_bus[1];
+ fe0->dvb.frontend = dvb_attach(atbm8830_attach,
+ &mygica_x8558pro_atbm8830_cfg2,
+ &i2c_bus->i2c_adap);
+ if (fe0->dvb.frontend != NULL) {
+ dvb_attach(max2165_attach,
+ fe0->dvb.frontend,
+ &i2c_bus->i2c_adap,
+ &mygic_x8558pro_max2165_cfg2);
+ }
+ break;
+ }
+ break;
default:
printk(KERN_INFO "%s: The frontend of your DVB/ATSC card "
diff --git a/linux/drivers/media/video/cx23885/cx23885.h b/linux/drivers/media/video/cx23885/cx23885.h
--- a/linux/drivers/media/video/cx23885/cx23885.h
+++ b/linux/drivers/media/video/cx23885/cx23885.h
@@ -80,6 +80,7 @@
#define CX23885_BOARD_MAGICPRO_PROHDTVE2 23
#define CX23885_BOARD_HAUPPAUGE_HVR1850 24
#define CX23885_BOARD_COMPRO_VIDEOMATE_E800 25
+#define CX23885_BOARD_MYGICA_X8558PRO 26
#define GPIO_0 0x00000001
#define GPIO_1 0x00000002
^ permalink raw reply [flat|nested] only message in thread
only message in thread, other threads:[~2009-10-26 11:54 UTC | newest]
Thread overview: (only message) (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
2009-10-26 11:54 [PATCH] CX23885 card Mygica X8558Pro DMB-TH David T. L. Wong
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.