All of lore.kernel.org
 help / color / mirror / Atom feed
From: Chris Hudson <chudson@kionix.com>
To: Jean Delvare <khali@linux-fr.org>
Cc: linux-omap@vger.kernel.org, lm-sensors@lm-sensors.org
Subject: Re: [lm-sensors] [RFC PATCH 1/3] hwmon:driver support for Kionix kxte9  accelerometer
Date: Tue, 10 Nov 2009 13:50:11 -0500	[thread overview]
Message-ID: <4AF9B5E3.1060902@kionix.com> (raw)
In-Reply-To: <20091110193539.7e1392f3@hyperion.delvare>



Jean Delvare wrote:
> On Tue, 10 Nov 2009 13:28:47 -0500, chudson@kionix.com wrote:
>   
>> From: Chris Hudson <chudson@kionix.com>
>>
>> This is a request for comments for adding driver support for the Kionix KXTE9 
>> digital tri-axis accelerometer.  This part features built-in tilt position 
>> (orientation), wake-up and back-to-sleep algorithms, which can trigger a 
>> user-configurable physical interrupt.  The driver uses i2c for device 
>> communication, a misc node for IOCTLs, and input nodes for reporting 
>> acceleration data and interrupt status information.
>>
>> Signed-off-by: Chris Hudson <chudson@kionix.com>
>>     
>
> Nack. We want less accelerometer drivers polluting drivers/hwmon, not
> more.
>
>   
Thank you Jean for your quick reply.  I have seen some accelerometer 
drivers in drivers/staging/iio/accel; is this where they are all being 
moved to?

WARNING: multiple messages have this Message-ID (diff)
From: Chris Hudson <chudson@kionix.com>
To: Jean Delvare <khali@linux-fr.org>
Cc: linux-omap@vger.kernel.org, lm-sensors@lm-sensors.org
Subject: Re: [lm-sensors] [RFC PATCH 1/3] hwmon:driver support for Kionix
Date: Tue, 10 Nov 2009 18:50:11 +0000	[thread overview]
Message-ID: <4AF9B5E3.1060902@kionix.com> (raw)
In-Reply-To: <20091110193539.7e1392f3@hyperion.delvare>



Jean Delvare wrote:
> On Tue, 10 Nov 2009 13:28:47 -0500, chudson@kionix.com wrote:
>   
>> From: Chris Hudson <chudson@kionix.com>
>>
>> This is a request for comments for adding driver support for the Kionix KXTE9 
>> digital tri-axis accelerometer.  This part features built-in tilt position 
>> (orientation), wake-up and back-to-sleep algorithms, which can trigger a 
>> user-configurable physical interrupt.  The driver uses i2c for device 
>> communication, a misc node for IOCTLs, and input nodes for reporting 
>> acceleration data and interrupt status information.
>>
>> Signed-off-by: Chris Hudson <chudson@kionix.com>
>>     
>
> Nack. We want less accelerometer drivers polluting drivers/hwmon, not
> more.
>
>   
Thank you Jean for your quick reply.  I have seen some accelerometer 
drivers in drivers/staging/iio/accel; is this where they are all being 
moved to?

_______________________________________________
lm-sensors mailing list
lm-sensors@lm-sensors.org
http://lists.lm-sensors.org/mailman/listinfo/lm-sensors

  reply	other threads:[~2009-11-10 18:50 UTC|newest]

Thread overview: 24+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2009-11-10 18:28 [RFC PATCH 1/3] hwmon:driver support for Kionix kxte9 accelerometer chudson
2009-11-10 18:28 ` [lm-sensors] [RFC PATCH 1/3] hwmon:driver support for Kionix kxte9 chudson
2009-11-10 18:28 ` [RFC PATCH 2/3] mach-omap2:kxte9 accelerometer support for OMAP ZoomII chudson
2009-11-10 18:28   ` [lm-sensors] [RFC PATCH 2/3] mach-omap2:kxte9 accelerometer support chudson
2009-11-10 18:28   ` [RFC PATCH 3/3] mach-omap2:mux support for kxte9 accelerometer on OMAP ZoomII chudson
2009-11-10 18:28     ` [lm-sensors] [RFC PATCH 3/3] mach-omap2:mux support for kxte9 chudson
2009-11-10 18:35 ` [lm-sensors] [RFC PATCH 1/3] hwmon:driver support for Kionix kxte9 accelerometer Jean Delvare
2009-11-10 18:35   ` [lm-sensors] [RFC PATCH 1/3] hwmon:driver support for Kionix Jean Delvare
2009-11-10 18:50   ` Chris Hudson [this message]
2009-11-10 18:50     ` Chris Hudson
2009-11-10 19:00     ` [lm-sensors] [RFC PATCH 1/3] hwmon:driver support for Kionix kxte9 accelerometer Jonathan Cameron
2009-11-10 19:00       ` [lm-sensors] [RFC PATCH 1/3] hwmon:driver support for Kionix Jonathan Cameron
2009-11-10 20:32       ` [lm-sensors] [RFC PATCH 1/3] hwmon:driver support for Kionix kxte9 accelerometer Chris Hudson
2009-11-10 20:32         ` [lm-sensors] [RFC PATCH 1/3] hwmon:driver support for Kionix Chris Hudson
2009-11-10 21:39         ` [lm-sensors] [RFC PATCH 1/3] hwmon:driver support for Kionix kxte9 accelerometer Jean Delvare
2009-11-10 21:39           ` [lm-sensors] [RFC PATCH 1/3] hwmon:driver support for Kionix Jean Delvare
2009-11-10 21:54           ` [lm-sensors] [RFC PATCH 1/3] hwmon:driver support for Kionix kxte9 accelerometer Chris Hudson
2009-11-10 21:54             ` [lm-sensors] [RFC PATCH 1/3] hwmon:driver support for Kionix Chris Hudson
2009-11-11 14:14             ` [lm-sensors] [RFC PATCH 1/3] hwmon:driver support for Kionix kxte9 accelerometer Jonathan Cameron
2009-11-11 14:14               ` [lm-sensors] [RFC PATCH 1/3] hwmon:driver support for Kionix Jonathan Cameron
2009-11-11 14:21               ` [lm-sensors] [RFC PATCH 1/3] hwmon:driver support for Kionix kxte9 accelerometer Chris Hudson
2009-11-11 14:21                 ` [lm-sensors] [RFC PATCH 1/3] hwmon:driver support for Kionix Chris Hudson
2009-11-12 21:10 ` [lm-sensors] [RFC PATCH 1/3] hwmon:driver support for Kionix kxte9 accelerometer Jonathan Cameron
2009-11-12 21:10   ` [lm-sensors] [RFC PATCH 1/3] hwmon:driver support for Kionix Jonathan Cameron

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=4AF9B5E3.1060902@kionix.com \
    --to=chudson@kionix.com \
    --cc=khali@linux-fr.org \
    --cc=linux-omap@vger.kernel.org \
    --cc=lm-sensors@lm-sensors.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body. 
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.