From: Jesper Krogh <jesper-Q2TZfHgGEy4@public.gmane.org>
To: "J. Bruce Fields" <bfields@fieldses.org>
Cc: linux-kernel@vger.kernel.org, linux-nfs@vger.kernel.org,
Greg Banks <gnb-xTcybq6BZ68@public.gmane.org>
Subject: Re: 2.6.31 under "heavy" NFS load.
Date: Tue, 10 Nov 2009 20:05:56 +0100 [thread overview]
Message-ID: <4AF9B994.8040301@krogh.cc> (raw)
In-Reply-To: <20091110184126.GD15000@fieldses.org>
J. Bruce Fields wrote:
> On Mon, Nov 09, 2009 at 08:30:44PM +0100, Jesper Krogh wrote:
>> When a lot (~60 all on 1GbitE) of NFS clients are hitting an NFS server
>> that has an 10GbitE NIC sitting on it I'm seeing high IO-wait load
>> (>50%) and load number over 100 on the server. This is a change since
>> 2.6.29 where the IO-wait load under similar workload was less than 10%.
>>
>> The system has 16 Opteron cores.
>>
>> All data the NFS-clients are reading are "memory recident" since they
>> are all reading off the same 10GB of data and the server has 32GB of
>> main memory dedicated to nothing else than serving NFS.
>>
>> A snapshot of top looks like this:
>> http://krogh.cc/~jesper/top-hest-2.6.31.txt
>>
>> The load is generally alot higher than on 2.6.29 and it "explodes" to
>> over 100 when a few processes begin utillizing the disk while serving
>> files over NFS. "dstat" reports a read-out of 10-20MB/s from disk which
>> is close to what I'd expect. and the system delivers around 600-800MB/s
>> over the NIC in this workload.
>
> Is that the bandwidth you get with 2.6.31, with 2.6.29, or with both?
Without being able to be fully accurate, I have a strong feeling that
the comparative numbers on 2.6.29 were more around 800-1000MB/s. But
this isn't based on any measurements so dont put too much into it. I'll
try to make up something that I can use for testing over multiple
kernel-versions.
> Are you just noticing a change in the statistics, or are there concrete
> changes in the performance of the server?
Interactivity on the console is alot worse. Still usable, but top takes
~5s to start up on 2.6.31 where I didn't remember any lags on 2.6.29 (so
less than 2s).
>> Sorry that I cannot be more specific, I can answer questions on a
>> running 2.6.31 kernel, but I cannot reboot the system back to 2.6.29
>> just to test since the system is "in production". I tried 2.6.30 and it
>> has the same pattern as 2.6.31, so based on that fragile evidence the
>> change should be found in between 2.6.29 and 2.6.30. I hope a "wague"
>> report is better than none.
>
> Can you test whether this helps?
I'll schedule testing..
--
Jesper
WARNING: multiple messages have this Message-ID (diff)
From: Jesper Krogh <jesper@krogh.cc>
To: "J. Bruce Fields" <bfields@fieldses.org>
Cc: linux-kernel@vger.kernel.org, linux-nfs@vger.kernel.org,
Greg Banks <gnb@fmeh.org>
Subject: Re: 2.6.31 under "heavy" NFS load.
Date: Tue, 10 Nov 2009 20:05:56 +0100 [thread overview]
Message-ID: <4AF9B994.8040301@krogh.cc> (raw)
In-Reply-To: <20091110184126.GD15000@fieldses.org>
J. Bruce Fields wrote:
> On Mon, Nov 09, 2009 at 08:30:44PM +0100, Jesper Krogh wrote:
>> When a lot (~60 all on 1GbitE) of NFS clients are hitting an NFS server
>> that has an 10GbitE NIC sitting on it I'm seeing high IO-wait load
>> (>50%) and load number over 100 on the server. This is a change since
>> 2.6.29 where the IO-wait load under similar workload was less than 10%.
>>
>> The system has 16 Opteron cores.
>>
>> All data the NFS-clients are reading are "memory recident" since they
>> are all reading off the same 10GB of data and the server has 32GB of
>> main memory dedicated to nothing else than serving NFS.
>>
>> A snapshot of top looks like this:
>> http://krogh.cc/~jesper/top-hest-2.6.31.txt
>>
>> The load is generally alot higher than on 2.6.29 and it "explodes" to
>> over 100 when a few processes begin utillizing the disk while serving
>> files over NFS. "dstat" reports a read-out of 10-20MB/s from disk which
>> is close to what I'd expect. and the system delivers around 600-800MB/s
>> over the NIC in this workload.
>
> Is that the bandwidth you get with 2.6.31, with 2.6.29, or with both?
Without being able to be fully accurate, I have a strong feeling that
the comparative numbers on 2.6.29 were more around 800-1000MB/s. But
this isn't based on any measurements so dont put too much into it. I'll
try to make up something that I can use for testing over multiple
kernel-versions.
> Are you just noticing a change in the statistics, or are there concrete
> changes in the performance of the server?
Interactivity on the console is alot worse. Still usable, but top takes
~5s to start up on 2.6.31 where I didn't remember any lags on 2.6.29 (so
less than 2s).
>> Sorry that I cannot be more specific, I can answer questions on a
>> running 2.6.31 kernel, but I cannot reboot the system back to 2.6.29
>> just to test since the system is "in production". I tried 2.6.30 and it
>> has the same pattern as 2.6.31, so based on that fragile evidence the
>> change should be found in between 2.6.29 and 2.6.30. I hope a "wague"
>> report is better than none.
>
> Can you test whether this helps?
I'll schedule testing..
--
Jesper
next prev parent reply other threads:[~2009-11-10 19:05 UTC|newest]
Thread overview: 9+ messages / expand[flat|nested] mbox.gz Atom feed top
2009-11-09 19:30 2.6.31 under "heavy" NFS load Jesper Krogh
2009-11-09 19:30 ` Jesper Krogh
[not found] ` <4AF86DE4.5010607-Q2TZfHgGEy4@public.gmane.org>
2009-11-10 18:41 ` J. Bruce Fields
2009-11-10 18:41 ` J. Bruce Fields
2009-11-10 19:05 ` Jesper Krogh [this message]
2009-11-10 19:05 ` Jesper Krogh
2009-11-19 20:22 ` Jesper Krogh
[not found] ` <4B05A91D.1090305-Q2TZfHgGEy4@public.gmane.org>
2009-11-23 21:27 ` J. Bruce Fields
2009-11-23 21:27 ` J. Bruce Fields
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=4AF9B994.8040301@krogh.cc \
--to=jesper-q2tzfhggey4@public.gmane.org \
--cc=bfields@fieldses.org \
--cc=gnb-xTcybq6BZ68@public.gmane.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-nfs@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.