Re: [PATCH] irq: Add node_affinity CPU masks for smarter irqbalance hints

[Eric Dumazet <eric.dumazet@gmail.com>]

Andi Kleen a écrit :
> Works here
>> dmesg | grep -i node
>> [    0.000000] SRAT: PXM 0 -> APIC 0 -> Node 0
>> [    0.000000] SRAT: PXM 0 -> APIC 1 -> Node 0
>> [    0.000000] SRAT: PXM 0 -> APIC 2 -> Node 0
>> [    0.000000] SRAT: PXM 0 -> APIC 3 -> Node 0
>> [    0.000000] SRAT: PXM 0 -> APIC 4 -> Node 0
>> [    0.000000] SRAT: PXM 0 -> APIC 5 -> Node 0
>> [    0.000000] SRAT: PXM 0 -> APIC 6 -> Node 0
>> [    0.000000] SRAT: PXM 0 -> APIC 7 -> Node 0
> 
> You seem to only have 8 CPUs (one socket) Normally a dual socket nehalem
> should have 16 with HyperThreading enabled.
> 
> For some reason the BIOS is not reporting the other CPU.
> 
> You could double check with acpidmp / iasl -d if that's
> what the BIOS really reports, but normally it should work.
> 

Good Lord, I had a CONFIG_NR_CPUS=16 in my .config.

Changing to to 32 or 64 seems better :)

# dmesg | grep -i node
[    0.000000] SRAT: PXM 0 -> APIC 0 -> Node 0
[    0.000000] SRAT: PXM 0 -> APIC 1 -> Node 0
[    0.000000] SRAT: PXM 0 -> APIC 2 -> Node 0
[    0.000000] SRAT: PXM 0 -> APIC 3 -> Node 0
[    0.000000] SRAT: PXM 0 -> APIC 4 -> Node 0
[    0.000000] SRAT: PXM 0 -> APIC 5 -> Node 0
[    0.000000] SRAT: PXM 0 -> APIC 6 -> Node 0
[    0.000000] SRAT: PXM 0 -> APIC 7 -> Node 0
[    0.000000] SRAT: PXM 1 -> APIC 16 -> Node 1
[    0.000000] SRAT: PXM 1 -> APIC 17 -> Node 1
[    0.000000] SRAT: PXM 1 -> APIC 18 -> Node 1
[    0.000000] SRAT: PXM 1 -> APIC 19 -> Node 1
[    0.000000] SRAT: PXM 1 -> APIC 20 -> Node 1
[    0.000000] SRAT: PXM 1 -> APIC 21 -> Node 1
[    0.000000] SRAT: PXM 1 -> APIC 22 -> Node 1
[    0.000000] SRAT: PXM 1 -> APIC 23 -> Node 1
[    0.000000] SRAT: Node 0 PXM 0 0-e0000000
[    0.000000] SRAT: Node 0 PXM 0 100000000-220000000
[    0.000000] SRAT: Node 1 PXM 1 220000000-420000000
[    0.000000] Bootmem setup node 0 0000000000000000-0000000220000000
[    0.000000]   NODE_DATA [0000000000001000 - 0000000000005fff]
[    0.000000] Bootmem setup node 1 0000000220000000-000000041ffff000
[    0.000000]   NODE_DATA [0000000220000000 - 0000000220004fff]
[    0.000000]  [ffffea0000000000-ffffea00087fffff] PMD -> [ffff880028600000-ffff8800305fffff] on node 0
[    0.000000]  [ffffea0008800000-ffffea00107fffff] PMD -> [ffff880220200000-ffff8802281fffff] on node 1
[    0.000000] Movable zone start PFN for each node
[    0.000000] early_node_map[5] active PFN ranges
[    0.000000] On node 0 totalpages: 2094543
[    0.000000] On node 1 totalpages: 2097151
[    0.000000] NR_CPUS:32 nr_cpumask_bits:32 nr_cpu_ids:32 nr_node_ids:2
[    0.000000] SLUB: Genslabs=14, HWalign=64, Order=0-3, MinObjects=0, CPUs=32, Nodes=2
[    0.004830] Inode-cache hash table entries: 1048576 (order: 11, 8388608 bytes)
[    0.007291] CPU 0/0x0 -> Node 0
[    0.398106] CPU 1/0x10 -> Node 1
[    0.557857] CPU 2/0x4 -> Node 0
[    0.717609] CPU 3/0x14 -> Node 1
[    0.877359] CPU 4/0x2 -> Node 0
[    1.037112] CPU 5/0x12 -> Node 1
[    1.196862] CPU 6/0x6 -> Node 0
[    1.356614] CPU 7/0x16 -> Node 1
[    1.516368] CPU 8/0x1 -> Node 0
[    1.676117] CPU 9/0x11 -> Node 1
[    1.835867] CPU 10/0x5 -> Node 0
[    1.995619] CPU 11/0x15 -> Node 1
[    2.155370] CPU 12/0x3 -> Node 0
[    2.315122] CPU 13/0x13 -> Node 1
[    2.474873] CPU 14/0x7 -> Node 0
[    2.634624] CPU 15/0x17 -> Node 1


Thanks Andi