From: Jiri Slaby <jirislaby@gmail.com>
To: linux-kernel@vger.kernel.org
Cc: alsa-devel@alsa-project.org, mm-commits@vger.kernel.org,
Takashi Iwai <tiwai@suse.de>,
akpm@linux-foundation.org, fengguang.wu@intel.com
Subject: ugly sound output (intel-hda) [was: mmotm 2009-11-24-16-47 uploaded]
Date: Fri, 27 Nov 2009 11:33:36 +0100 [thread overview]
Message-ID: <4B0FAB00.9060805@gmail.com> (raw)
In-Reply-To: <200911250111.nAP1BFg5030254@imap1.linux-foundation.org>
On 11/25/2009 01:47 AM, akpm@linux-foundation.org wrote:
> The mm-of-the-moment snapshot 2009-11-24-16-47 has been uploaded to
Hi, when I boot into that kernel, I hear, since the boot phase, short
scratches repeatedly every (just a guess) 100 ms.
# cat /proc/asound/cards
0 [Intel ]: HDA-Intel - HDA Intel
HDA Intel at 0xffa74000 irq 29
# cat /proc/asound/card0/codec#2
Codec: SigmaTel STAC9274D
Address: 2
Function Id: 0x1
Vendor Id: 0x83847621
Subsystem Id: 0x00000100
Revision Id: 0x100201
No Modem Function Group found
Default PCM:
rates [0x7e0]: 44100 48000 88200 96000 176400 192000
bits [0xe]: 16 20 24
formats [0x1]: PCM
Default Amp-In caps: ofs=0x00, nsteps=0x0e, stepsize=0x05, mute=0
Default Amp-Out caps: ofs=0x7f, nsteps=0x7f, stepsize=0x02, mute=1
GPIO: io=3, o=0, i=0, unsolicited=1, wake=1
IO[0]: enable=1, dir=1, wake=0, sticky=0, data=0, unsol=0
IO[1]: enable=0, dir=0, wake=0, sticky=0, data=0, unsol=0
IO[2]: enable=0, dir=0, wake=0, sticky=0, data=0, unsol=0
Analog Loopback: 0x00
Node 0x02 [Audio Output] wcaps 0xd0c05: Stereo Amp-Out R/L
Control: name="Front Playback Volume", index=0, device=0
Control: name="Front Playback Switch", index=0, device=0
Device: name="STAC92xx Analog", type="Audio", device=0
Amp-Out caps: N/A
Amp-Out vals: [0x67 0x67]
Converter: stream=5, channel=0
Power: setting=D0, actual=D0
Delay: 13 samples
Node 0x03 [Audio Output] wcaps 0xd0c05: Stereo Amp-Out R/L
Control: name="Side Playback Volume", index=0, device=0
Control: name="Side Playback Switch", index=0, device=0
Amp-Out caps: N/A
Amp-Out vals: [0x67 0x67]
Converter: stream=5, channel=0
Power: setting=D0, actual=D0
Delay: 13 samples
Node 0x04 [Audio Output] wcaps 0xd0c05: Stereo Amp-Out R/L
Control: name="Center Playback Volume", index=0, device=0
Control: name="Center Playback Switch", index=0, device=0
Control: name="LFE Playback Volume", index=0, device=0
Control: name="LFE Playback Switch", index=0, device=0
Control: name="Swap Center/LFE Playback Switch", index=0, device=0
Amp-Out caps: N/A
Amp-Out vals: [0x67 0x67]
Converter: stream=5, channel=4
Power: setting=D0, actual=D0
Delay: 13 samples
Node 0x05 [Audio Output] wcaps 0xd0c05: Stereo Amp-Out R/L
Control: name="Surround Playback Volume", index=0, device=0
Control: name="Surround Playback Switch", index=0, device=0
Amp-Out caps: N/A
Amp-Out vals: [0x67 0x67]
Converter: stream=5, channel=2
Power: setting=D0, actual=D0
Delay: 13 samples
Node 0x06 [Audio Output] wcaps 0xd0c05: Stereo Amp-Out R/L
Control: name="Headphone Playback Volume", index=0, device=0
Control: name="Headphone Playback Switch", index=0, device=0
Amp-Out caps: N/A
Amp-Out vals: [0x67 0x67]
Converter: stream=5, channel=0
Power: setting=D0, actual=D0
Delay: 13 samples
Node 0x07 [Audio Input] wcaps 0x1d0541: Stereo
Device: name="STAC92xx Analog", type="Audio", device=0
Converter: stream=0, channel=0
SDI-Select: 0
Power: setting=D0, actual=D0
Delay: 13 samples
Connection: 1
0x1b
Processing caps: benign=0, ncoeff=0
Node 0x08 [Audio Input] wcaps 0x1d0541: Stereo
Converter: stream=0, channel=0
SDI-Select: 0
Power: setting=D0, actual=D0
Delay: 13 samples
Connection: 1
0x1c
Processing caps: benign=0, ncoeff=0
Node 0x09 [Audio Input] wcaps 0x1d0541: Stereo
Converter: stream=0, channel=0
SDI-Select: 0
Power: setting=D0, actual=D0
Delay: 13 samples
Connection: 1
0x1d
Processing caps: benign=0, ncoeff=0
Node 0x0a [Pin Complex] wcaps 0x400181: Stereo
Pincap 0x0000173f: IN OUT HP Detect Trigger ImpSense
Vref caps: HIZ 50 GRD 80
Pin Default 0x02214020: [Jack] HP Out at Ext Front
Conn = 1/8, Color = Green
DefAssociation = 0x2, Sequence = 0x0
Pin-ctls: 0x00: VREF_HIZ
Unsolicited: tag=01, enabled=1
Connection: 3
0x02 0x03 0x06*
Node 0x0b [Pin Complex] wcaps 0x400181: Stereo
Control: name="Front Mic Jack Mode", index=0, device=0
Pincap 0x0000173f: IN OUT HP Detect Trigger ImpSense
Vref caps: HIZ 50 GRD 80
Pin Default 0x02a19080: [Jack] Mic at Ext Front
Conn = 1/8, Color = Pink
DefAssociation = 0x8, Sequence = 0x0
Pin-ctls: 0x24: IN VREF_80
Unsolicited: tag=03, enabled=1
Connection: 3
0x02* 0x03 0x06
Node 0x0c [Pin Complex] wcaps 0x400181: Stereo
Control: name="Line Jack Mode", index=0, device=0
Pincap 0x00001737: IN OUT Detect Trigger ImpSense
Vref caps: HIZ 50 GRD 80
Pin Default 0x0181304e: [Jack] Line In at Ext Rear
Conn = 1/8, Color = Blue
DefAssociation = 0x4, Sequence = 0xe
Pin-ctls: 0x20: IN VREF_HIZ
Unsolicited: tag=04, enabled=1
Connection: 1
0x03
Node 0x0d [Pin Complex] wcaps 0x400181: Stereo
Pincap 0x0000173f: IN OUT HP Detect Trigger ImpSense
Vref caps: HIZ 50 GRD 80
Pin Default 0x01014010: [Jack] Line Out at Ext Rear
Conn = 1/8, Color = Green
DefAssociation = 0x1, Sequence = 0x0
Pin-ctls: 0x40: OUT VREF_HIZ
Unsolicited: tag=00, enabled=0
Connection: 1
0x02
Node 0x0e [Pin Complex] wcaps 0x400181: Stereo
Control: name="Mic Jack Mode", index=0, device=0
Pincap 0x00001737: IN OUT Detect Trigger ImpSense
Vref caps: HIZ 50 GRD 80
Pin Default 0x01a19040: [Jack] Mic at Ext Rear
Conn = 1/8, Color = Pink
DefAssociation = 0x4, Sequence = 0x0
Pin-ctls: 0x24: IN VREF_80
Unsolicited: tag=02, enabled=1
Connection: 1
0x04
Node 0x0f [Pin Complex] wcaps 0x400181: Stereo
Pincap 0x00001737: IN OUT Detect Trigger ImpSense
Vref caps: HIZ 50 GRD 80
Pin Default 0x01011012: [Jack] Line Out at Ext Rear
Conn = 1/8, Color = Black
DefAssociation = 0x1, Sequence = 0x2
Pin-ctls: 0x40: OUT VREF_HIZ
Unsolicited: tag=00, enabled=0
Connection: 1
0x05
Node 0x10 [Pin Complex] wcaps 0x400181: Stereo
Pincap 0x00000037: IN OUT Detect Trigger ImpSense
Pin Default 0x01016011: [Jack] Line Out at Ext Rear
Conn = 1/8, Color = Orange
DefAssociation = 0x1, Sequence = 0x1
Pin-ctls: 0x40: OUT
Unsolicited: tag=00, enabled=0
Connection: 1
0x04
Node 0x11 [Pin Complex] wcaps 0x400181: Stereo
Pincap 0x00000037: IN OUT Detect Trigger ImpSense
Pin Default 0x01012014: [Jack] Line Out at Ext Rear
Conn = 1/8, Color = Grey
DefAssociation = 0x1, Sequence = 0x4
Pin-ctls: 0x40: OUT
Unsolicited: tag=00, enabled=0
Connection: 1
0x03
Node 0x12 [Pin Complex] wcaps 0x400001: Stereo
Pincap 0x00000020: IN
Pin Default 0x503301f0: [N/A] CD at Int N/A
Conn = ATAPI, Color = Unknown
DefAssociation = 0xf, Sequence = 0x0
Misc = NO_PRESENCE
Pin-ctls: 0x00:
Node 0x13 [Pin Complex] wcaps 0x400001: Stereo
Pincap 0x00000020: IN
Pin Default 0x50a001f0: [N/A] Mic at Int N/A
Conn = Unknown, Color = Unknown
DefAssociation = 0xf, Sequence = 0x0
Misc = NO_PRESENCE
Pin-ctls: 0x00:
Node 0x14 [Pin Complex] wcaps 0x400001: Stereo
Pincap 0x00000020: IN
Pin Default 0x50a001f0: [N/A] Mic at Int N/A
Conn = Unknown, Color = Unknown
DefAssociation = 0xf, Sequence = 0x0
Misc = NO_PRESENCE
Pin-ctls: 0x00:
Node 0x15 [Audio Selector] wcaps 0x30010d: Stereo Amp-Out
Control: name="Mux Capture Volume", index=0, device=0
Amp-Out caps: ofs=0x00, nsteps=0x04, stepsize=0x27, mute=0
Amp-Out vals: [0x00 0x00]
Connection: 9
0x0e* 0x12 0x0f 0x0b 0x0c 0x0d 0x0a 0x10 0x11
Node 0x16 [Audio Selector] wcaps 0x30010d: Stereo Amp-Out
Control: name="Mux Capture Volume", index=1, device=0
Amp-Out caps: ofs=0x00, nsteps=0x04, stepsize=0x27, mute=0
Amp-Out vals: [0x00 0x00]
Connection: 9
0x0e* 0x12 0x0f 0x0b 0x0c 0x0d 0x0a 0x10 0x11
Node 0x17 [Audio Selector] wcaps 0x30010d: Stereo Amp-Out
Control: name="Mux Capture Volume", index=2, device=0
Amp-Out caps: ofs=0x00, nsteps=0x04, stepsize=0x27, mute=0
Amp-Out vals: [0x00 0x00]
Connection: 9
0x0e* 0x12 0x0f 0x0b 0x0c 0x0d 0x0a 0x10 0x11
Node 0x18 [Audio Selector] wcaps 0x300103: Stereo Amp-In
Control: name="Capture Volume", index=0, device=0
Amp-In caps: N/A
Amp-In vals: [0x08 0x08]
Connection: 1
0x15
Node 0x19 [Audio Selector] wcaps 0x300103: Stereo Amp-In
Control: name="Capture Volume", index=1, device=0
Amp-In caps: N/A
Amp-In vals: [0x00 0x00]
Connection: 1
0x16
Node 0x1a [Audio Selector] wcaps 0x300103: Stereo Amp-In
Control: name="Capture Volume", index=2, device=0
Amp-In caps: N/A
Amp-In vals: [0x00 0x00]
Connection: 1
0x17
Node 0x1b [Audio Selector] wcaps 0x30090d: Stereo Amp-Out R/L
Control: name="Capture Switch", index=0, device=0
Amp-Out caps: ofs=0x00, nsteps=0x00, stepsize=0x00, mute=1
Amp-Out vals: [0x00 0x00]
Connection: 3
0x18* 0x13 0x14
Node 0x1c [Audio Selector] wcaps 0x30090d: Stereo Amp-Out R/L
Control: name="Capture Switch", index=1, device=0
Amp-Out caps: ofs=0x00, nsteps=0x00, stepsize=0x00, mute=1
Amp-Out vals: [0x80 0x80]
Connection: 3
0x19* 0x13 0x14
Node 0x1d [Audio Selector] wcaps 0x30090d: Stereo Amp-Out R/L
Control: name="Capture Switch", index=2, device=0
Amp-Out caps: ofs=0x00, nsteps=0x00, stepsize=0x00, mute=1
Amp-Out vals: [0x80 0x80]
Connection: 3
0x1a* 0x13 0x14
Node 0x1e [Audio Output] wcaps 0x40211: Stereo Digital
Control: name="IEC958 Playback Con Mask", index=0, device=0
Control: name="IEC958 Playback Pro Mask", index=0, device=0
Control: name="IEC958 Playback Default", index=0, device=0
Control: name="IEC958 Playback Switch", index=0, device=0
Control: name="IEC958 Default PCM Playback Switch", index=0, device=0
Device: name="STAC92xx Digital", type="SPDIF", device=1
Converter: stream=0, channel=0
Digital:
Digital category: 0x0
PCM:
rates [0x7e0]: 44100 48000 88200 96000 176400 192000
bits [0xe]: 16 20 24
formats [0x5]: PCM AC3
Delay: 4 samples
Node 0x1f [Vendor Defined Widget] wcaps 0xf30201: Stereo Digital
Delay: 3 samples
Node 0x20 [Audio Input] wcaps 0x140311: Stereo Digital
Device: name="STAC92xx Digital", type="SPDIF", device=1
Converter: stream=0, channel=0
SDI-Select: 0
Digital:
Digital category: 0x0
PCM:
rates [0x160]: 44100 48000 96000
bits [0xe]: 16 20 24
formats [0x5]: PCM AC3
Delay: 4 samples
Connection: 1
0x22
Node 0x21 [Pin Complex] wcaps 0x400301: Stereo Digital
Pincap 0x00000010: OUT
Pin Default 0x01442170: [Jack] SPDIF Out at Ext Rear
Conn = RCA, Color = Grey
DefAssociation = 0x7, Sequence = 0x0
Misc = NO_PRESENCE
Pin-ctls: 0x40: OUT
Connection: 5
0x1e* 0x1f 0x1b 0x1c 0x1d
Node 0x22 [Pin Complex] wcaps 0x430681: Stereo Digital
Pincap 0x00010024: IN EAPD Detect
EAPD 0x0:
Pin Default 0x81c42090: [Fixed] SPDIF In at Ext Rear
Conn = RCA, Color = Grey
DefAssociation = 0x9, Sequence = 0x0
Pin-ctls: 0x20: IN
Unsolicited: tag=00, enabled=0
Power: setting=D0, actual=D0
Delay: 3 samples
Node 0x23 [Beep Generator Widget] wcaps 0x70000c: Mono Amp-Out
Amp-Out caps: ofs=0x03, nsteps=0x03, stepsize=0x17, mute=0
Amp-Out vals: [0x00]
Node 0x24 [Volume Knob Widget] wcaps 0x600000: Mono
Volume-Knob: delta=1, steps=127, direct=1, val=127
Connection: 5
0x02 0x03 0x04 0x05 0x06
It's a regression against, I think, 2009-11-13-19-59.
thanks,
--
js
WARNING: multiple messages have this Message-ID (diff)
From: Jiri Slaby <jirislaby@gmail.com>
To: linux-kernel@vger.kernel.org
Cc: akpm@linux-foundation.org, mm-commits@vger.kernel.org,
Jaroslav Kysela <perex@perex.cz>, Takashi Iwai <tiwai@suse.de>,
alsa-devel@alsa-project.org, fengguang.wu@intel.com
Subject: ugly sound output (intel-hda) [was: mmotm 2009-11-24-16-47 uploaded]
Date: Fri, 27 Nov 2009 11:33:36 +0100 [thread overview]
Message-ID: <4B0FAB00.9060805@gmail.com> (raw)
In-Reply-To: <200911250111.nAP1BFg5030254@imap1.linux-foundation.org>
On 11/25/2009 01:47 AM, akpm@linux-foundation.org wrote:
> The mm-of-the-moment snapshot 2009-11-24-16-47 has been uploaded to
Hi, when I boot into that kernel, I hear, since the boot phase, short
scratches repeatedly every (just a guess) 100 ms.
# cat /proc/asound/cards
0 [Intel ]: HDA-Intel - HDA Intel
HDA Intel at 0xffa74000 irq 29
# cat /proc/asound/card0/codec#2
Codec: SigmaTel STAC9274D
Address: 2
Function Id: 0x1
Vendor Id: 0x83847621
Subsystem Id: 0x00000100
Revision Id: 0x100201
No Modem Function Group found
Default PCM:
rates [0x7e0]: 44100 48000 88200 96000 176400 192000
bits [0xe]: 16 20 24
formats [0x1]: PCM
Default Amp-In caps: ofs=0x00, nsteps=0x0e, stepsize=0x05, mute=0
Default Amp-Out caps: ofs=0x7f, nsteps=0x7f, stepsize=0x02, mute=1
GPIO: io=3, o=0, i=0, unsolicited=1, wake=1
IO[0]: enable=1, dir=1, wake=0, sticky=0, data=0, unsol=0
IO[1]: enable=0, dir=0, wake=0, sticky=0, data=0, unsol=0
IO[2]: enable=0, dir=0, wake=0, sticky=0, data=0, unsol=0
Analog Loopback: 0x00
Node 0x02 [Audio Output] wcaps 0xd0c05: Stereo Amp-Out R/L
Control: name="Front Playback Volume", index=0, device=0
Control: name="Front Playback Switch", index=0, device=0
Device: name="STAC92xx Analog", type="Audio", device=0
Amp-Out caps: N/A
Amp-Out vals: [0x67 0x67]
Converter: stream=5, channel=0
Power: setting=D0, actual=D0
Delay: 13 samples
Node 0x03 [Audio Output] wcaps 0xd0c05: Stereo Amp-Out R/L
Control: name="Side Playback Volume", index=0, device=0
Control: name="Side Playback Switch", index=0, device=0
Amp-Out caps: N/A
Amp-Out vals: [0x67 0x67]
Converter: stream=5, channel=0
Power: setting=D0, actual=D0
Delay: 13 samples
Node 0x04 [Audio Output] wcaps 0xd0c05: Stereo Amp-Out R/L
Control: name="Center Playback Volume", index=0, device=0
Control: name="Center Playback Switch", index=0, device=0
Control: name="LFE Playback Volume", index=0, device=0
Control: name="LFE Playback Switch", index=0, device=0
Control: name="Swap Center/LFE Playback Switch", index=0, device=0
Amp-Out caps: N/A
Amp-Out vals: [0x67 0x67]
Converter: stream=5, channel=4
Power: setting=D0, actual=D0
Delay: 13 samples
Node 0x05 [Audio Output] wcaps 0xd0c05: Stereo Amp-Out R/L
Control: name="Surround Playback Volume", index=0, device=0
Control: name="Surround Playback Switch", index=0, device=0
Amp-Out caps: N/A
Amp-Out vals: [0x67 0x67]
Converter: stream=5, channel=2
Power: setting=D0, actual=D0
Delay: 13 samples
Node 0x06 [Audio Output] wcaps 0xd0c05: Stereo Amp-Out R/L
Control: name="Headphone Playback Volume", index=0, device=0
Control: name="Headphone Playback Switch", index=0, device=0
Amp-Out caps: N/A
Amp-Out vals: [0x67 0x67]
Converter: stream=5, channel=0
Power: setting=D0, actual=D0
Delay: 13 samples
Node 0x07 [Audio Input] wcaps 0x1d0541: Stereo
Device: name="STAC92xx Analog", type="Audio", device=0
Converter: stream=0, channel=0
SDI-Select: 0
Power: setting=D0, actual=D0
Delay: 13 samples
Connection: 1
0x1b
Processing caps: benign=0, ncoeff=0
Node 0x08 [Audio Input] wcaps 0x1d0541: Stereo
Converter: stream=0, channel=0
SDI-Select: 0
Power: setting=D0, actual=D0
Delay: 13 samples
Connection: 1
0x1c
Processing caps: benign=0, ncoeff=0
Node 0x09 [Audio Input] wcaps 0x1d0541: Stereo
Converter: stream=0, channel=0
SDI-Select: 0
Power: setting=D0, actual=D0
Delay: 13 samples
Connection: 1
0x1d
Processing caps: benign=0, ncoeff=0
Node 0x0a [Pin Complex] wcaps 0x400181: Stereo
Pincap 0x0000173f: IN OUT HP Detect Trigger ImpSense
Vref caps: HIZ 50 GRD 80
Pin Default 0x02214020: [Jack] HP Out at Ext Front
Conn = 1/8, Color = Green
DefAssociation = 0x2, Sequence = 0x0
Pin-ctls: 0x00: VREF_HIZ
Unsolicited: tag=01, enabled=1
Connection: 3
0x02 0x03 0x06*
Node 0x0b [Pin Complex] wcaps 0x400181: Stereo
Control: name="Front Mic Jack Mode", index=0, device=0
Pincap 0x0000173f: IN OUT HP Detect Trigger ImpSense
Vref caps: HIZ 50 GRD 80
Pin Default 0x02a19080: [Jack] Mic at Ext Front
Conn = 1/8, Color = Pink
DefAssociation = 0x8, Sequence = 0x0
Pin-ctls: 0x24: IN VREF_80
Unsolicited: tag=03, enabled=1
Connection: 3
0x02* 0x03 0x06
Node 0x0c [Pin Complex] wcaps 0x400181: Stereo
Control: name="Line Jack Mode", index=0, device=0
Pincap 0x00001737: IN OUT Detect Trigger ImpSense
Vref caps: HIZ 50 GRD 80
Pin Default 0x0181304e: [Jack] Line In at Ext Rear
Conn = 1/8, Color = Blue
DefAssociation = 0x4, Sequence = 0xe
Pin-ctls: 0x20: IN VREF_HIZ
Unsolicited: tag=04, enabled=1
Connection: 1
0x03
Node 0x0d [Pin Complex] wcaps 0x400181: Stereo
Pincap 0x0000173f: IN OUT HP Detect Trigger ImpSense
Vref caps: HIZ 50 GRD 80
Pin Default 0x01014010: [Jack] Line Out at Ext Rear
Conn = 1/8, Color = Green
DefAssociation = 0x1, Sequence = 0x0
Pin-ctls: 0x40: OUT VREF_HIZ
Unsolicited: tag=00, enabled=0
Connection: 1
0x02
Node 0x0e [Pin Complex] wcaps 0x400181: Stereo
Control: name="Mic Jack Mode", index=0, device=0
Pincap 0x00001737: IN OUT Detect Trigger ImpSense
Vref caps: HIZ 50 GRD 80
Pin Default 0x01a19040: [Jack] Mic at Ext Rear
Conn = 1/8, Color = Pink
DefAssociation = 0x4, Sequence = 0x0
Pin-ctls: 0x24: IN VREF_80
Unsolicited: tag=02, enabled=1
Connection: 1
0x04
Node 0x0f [Pin Complex] wcaps 0x400181: Stereo
Pincap 0x00001737: IN OUT Detect Trigger ImpSense
Vref caps: HIZ 50 GRD 80
Pin Default 0x01011012: [Jack] Line Out at Ext Rear
Conn = 1/8, Color = Black
DefAssociation = 0x1, Sequence = 0x2
Pin-ctls: 0x40: OUT VREF_HIZ
Unsolicited: tag=00, enabled=0
Connection: 1
0x05
Node 0x10 [Pin Complex] wcaps 0x400181: Stereo
Pincap 0x00000037: IN OUT Detect Trigger ImpSense
Pin Default 0x01016011: [Jack] Line Out at Ext Rear
Conn = 1/8, Color = Orange
DefAssociation = 0x1, Sequence = 0x1
Pin-ctls: 0x40: OUT
Unsolicited: tag=00, enabled=0
Connection: 1
0x04
Node 0x11 [Pin Complex] wcaps 0x400181: Stereo
Pincap 0x00000037: IN OUT Detect Trigger ImpSense
Pin Default 0x01012014: [Jack] Line Out at Ext Rear
Conn = 1/8, Color = Grey
DefAssociation = 0x1, Sequence = 0x4
Pin-ctls: 0x40: OUT
Unsolicited: tag=00, enabled=0
Connection: 1
0x03
Node 0x12 [Pin Complex] wcaps 0x400001: Stereo
Pincap 0x00000020: IN
Pin Default 0x503301f0: [N/A] CD at Int N/A
Conn = ATAPI, Color = Unknown
DefAssociation = 0xf, Sequence = 0x0
Misc = NO_PRESENCE
Pin-ctls: 0x00:
Node 0x13 [Pin Complex] wcaps 0x400001: Stereo
Pincap 0x00000020: IN
Pin Default 0x50a001f0: [N/A] Mic at Int N/A
Conn = Unknown, Color = Unknown
DefAssociation = 0xf, Sequence = 0x0
Misc = NO_PRESENCE
Pin-ctls: 0x00:
Node 0x14 [Pin Complex] wcaps 0x400001: Stereo
Pincap 0x00000020: IN
Pin Default 0x50a001f0: [N/A] Mic at Int N/A
Conn = Unknown, Color = Unknown
DefAssociation = 0xf, Sequence = 0x0
Misc = NO_PRESENCE
Pin-ctls: 0x00:
Node 0x15 [Audio Selector] wcaps 0x30010d: Stereo Amp-Out
Control: name="Mux Capture Volume", index=0, device=0
Amp-Out caps: ofs=0x00, nsteps=0x04, stepsize=0x27, mute=0
Amp-Out vals: [0x00 0x00]
Connection: 9
0x0e* 0x12 0x0f 0x0b 0x0c 0x0d 0x0a 0x10 0x11
Node 0x16 [Audio Selector] wcaps 0x30010d: Stereo Amp-Out
Control: name="Mux Capture Volume", index=1, device=0
Amp-Out caps: ofs=0x00, nsteps=0x04, stepsize=0x27, mute=0
Amp-Out vals: [0x00 0x00]
Connection: 9
0x0e* 0x12 0x0f 0x0b 0x0c 0x0d 0x0a 0x10 0x11
Node 0x17 [Audio Selector] wcaps 0x30010d: Stereo Amp-Out
Control: name="Mux Capture Volume", index=2, device=0
Amp-Out caps: ofs=0x00, nsteps=0x04, stepsize=0x27, mute=0
Amp-Out vals: [0x00 0x00]
Connection: 9
0x0e* 0x12 0x0f 0x0b 0x0c 0x0d 0x0a 0x10 0x11
Node 0x18 [Audio Selector] wcaps 0x300103: Stereo Amp-In
Control: name="Capture Volume", index=0, device=0
Amp-In caps: N/A
Amp-In vals: [0x08 0x08]
Connection: 1
0x15
Node 0x19 [Audio Selector] wcaps 0x300103: Stereo Amp-In
Control: name="Capture Volume", index=1, device=0
Amp-In caps: N/A
Amp-In vals: [0x00 0x00]
Connection: 1
0x16
Node 0x1a [Audio Selector] wcaps 0x300103: Stereo Amp-In
Control: name="Capture Volume", index=2, device=0
Amp-In caps: N/A
Amp-In vals: [0x00 0x00]
Connection: 1
0x17
Node 0x1b [Audio Selector] wcaps 0x30090d: Stereo Amp-Out R/L
Control: name="Capture Switch", index=0, device=0
Amp-Out caps: ofs=0x00, nsteps=0x00, stepsize=0x00, mute=1
Amp-Out vals: [0x00 0x00]
Connection: 3
0x18* 0x13 0x14
Node 0x1c [Audio Selector] wcaps 0x30090d: Stereo Amp-Out R/L
Control: name="Capture Switch", index=1, device=0
Amp-Out caps: ofs=0x00, nsteps=0x00, stepsize=0x00, mute=1
Amp-Out vals: [0x80 0x80]
Connection: 3
0x19* 0x13 0x14
Node 0x1d [Audio Selector] wcaps 0x30090d: Stereo Amp-Out R/L
Control: name="Capture Switch", index=2, device=0
Amp-Out caps: ofs=0x00, nsteps=0x00, stepsize=0x00, mute=1
Amp-Out vals: [0x80 0x80]
Connection: 3
0x1a* 0x13 0x14
Node 0x1e [Audio Output] wcaps 0x40211: Stereo Digital
Control: name="IEC958 Playback Con Mask", index=0, device=0
Control: name="IEC958 Playback Pro Mask", index=0, device=0
Control: name="IEC958 Playback Default", index=0, device=0
Control: name="IEC958 Playback Switch", index=0, device=0
Control: name="IEC958 Default PCM Playback Switch", index=0, device=0
Device: name="STAC92xx Digital", type="SPDIF", device=1
Converter: stream=0, channel=0
Digital:
Digital category: 0x0
PCM:
rates [0x7e0]: 44100 48000 88200 96000 176400 192000
bits [0xe]: 16 20 24
formats [0x5]: PCM AC3
Delay: 4 samples
Node 0x1f [Vendor Defined Widget] wcaps 0xf30201: Stereo Digital
Delay: 3 samples
Node 0x20 [Audio Input] wcaps 0x140311: Stereo Digital
Device: name="STAC92xx Digital", type="SPDIF", device=1
Converter: stream=0, channel=0
SDI-Select: 0
Digital:
Digital category: 0x0
PCM:
rates [0x160]: 44100 48000 96000
bits [0xe]: 16 20 24
formats [0x5]: PCM AC3
Delay: 4 samples
Connection: 1
0x22
Node 0x21 [Pin Complex] wcaps 0x400301: Stereo Digital
Pincap 0x00000010: OUT
Pin Default 0x01442170: [Jack] SPDIF Out at Ext Rear
Conn = RCA, Color = Grey
DefAssociation = 0x7, Sequence = 0x0
Misc = NO_PRESENCE
Pin-ctls: 0x40: OUT
Connection: 5
0x1e* 0x1f 0x1b 0x1c 0x1d
Node 0x22 [Pin Complex] wcaps 0x430681: Stereo Digital
Pincap 0x00010024: IN EAPD Detect
EAPD 0x0:
Pin Default 0x81c42090: [Fixed] SPDIF In at Ext Rear
Conn = RCA, Color = Grey
DefAssociation = 0x9, Sequence = 0x0
Pin-ctls: 0x20: IN
Unsolicited: tag=00, enabled=0
Power: setting=D0, actual=D0
Delay: 3 samples
Node 0x23 [Beep Generator Widget] wcaps 0x70000c: Mono Amp-Out
Amp-Out caps: ofs=0x03, nsteps=0x03, stepsize=0x17, mute=0
Amp-Out vals: [0x00]
Node 0x24 [Volume Knob Widget] wcaps 0x600000: Mono
Volume-Knob: delta=1, steps=127, direct=1, val=127
Connection: 5
0x02 0x03 0x04 0x05 0x06
It's a regression against, I think, 2009-11-13-19-59.
thanks,
--
js
next prev parent reply other threads:[~2009-11-27 10:33 UTC|newest]
Thread overview: 37+ messages / expand[flat|nested] mbox.gz Atom feed top
2009-11-25 0:47 mmotm 2009-11-24-16-47 uploaded akpm
2009-11-25 15:12 ` BUG at scsi_lib.c:1108 [Was: mmotm 2009-11-24-16-47 uploaded] Jiri Slaby
2009-11-25 15:19 ` James Bottomley
2009-11-25 20:22 ` Jiri Slaby
2009-11-25 21:13 ` Neil Brown
2009-11-26 10:17 ` Boaz Harrosh
2009-11-27 4:17 ` Neil Brown
2009-11-27 10:20 ` Jiri Slaby
2009-11-26 1:46 ` mmotm 2009-11-24-16-47 uploaded (gpio_max7301) Randy Dunlap
2009-11-28 16:21 ` Wolfram Sang
2009-12-15 22:43 ` Andrew Morton
2009-12-15 22:46 ` Randy Dunlap
2009-12-15 23:10 ` Andrew Morton
2009-12-16 11:30 ` Wolfram Sang
2009-11-27 10:33 ` Jiri Slaby [this message]
2009-11-27 10:33 ` ugly sound output (intel-hda) [was: mmotm 2009-11-24-16-47 uploaded] Jiri Slaby
2009-11-27 10:45 ` Takashi Iwai
2009-11-27 10:45 ` Takashi Iwai
2009-11-27 11:07 ` Jiri Slaby
2009-11-27 11:07 ` Jiri Slaby
2009-11-27 11:18 ` Takashi Iwai
2009-11-27 11:18 ` Takashi Iwai
2009-11-27 12:22 ` Jiri Slaby
2009-11-27 12:22 ` Jiri Slaby
2009-11-27 12:26 ` Takashi Iwai
2009-11-27 12:26 ` Takashi Iwai
2009-11-27 15:03 ` WARNING: kernel/smp.c:292 smp_call_function_single [Was: " Jiri Slaby
2009-11-27 15:17 ` Peter Zijlstra
2009-11-27 16:37 ` Thomas Gleixner
2009-11-27 16:44 ` Thomas Gleixner
2009-11-28 12:12 ` Avi Kivity
2009-11-30 8:58 ` Tejun Heo
2009-11-30 9:41 ` Avi Kivity
2009-11-30 10:02 ` Thomas Gleixner
2009-11-30 10:45 ` Tejun Heo
2009-11-30 11:02 ` [PATCH tip/sched/urgent] sched: revert 498657a478c60be092208422fefa9c7b248729c2 Tejun Heo
2009-11-30 11:13 ` Avi Kivity
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=4B0FAB00.9060805@gmail.com \
--to=jirislaby@gmail.com \
--cc=akpm@linux-foundation.org \
--cc=alsa-devel@alsa-project.org \
--cc=fengguang.wu@intel.com \
--cc=linux-kernel@vger.kernel.org \
--cc=mm-commits@vger.kernel.org \
--cc=tiwai@suse.de \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.